1 files changed, 68 insertions, 3 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 36b511c7cade..1def6049784c 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -513,6 +513,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards and autoprobe.
     
+    The power-management is supported.
+
   Module snd-ens1371
   ------------------
 
@@ -526,6 +528,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards and autoprobe.
     
+    The power-management is supported.
+
   Module snd-es968
   ----------------
 
@@ -671,6 +675,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     model       - force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
+    single_cmd  - Use single immediate commands to communicate with
+                codecs (for debugging only)
 
     This module supports one card and autoprobe.
 
@@ -694,13 +700,34 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
           asus          3-jack
           uniwill       3-jack
           F1734         2-jack
+          lg            LG laptop (m1 express dual)
           test          for testing/debugging purpose, almost all controls can be
                         adjusted.  Appearing only when compiled with
                         $CONFIG_SND_DEBUG=y
+          auto          auto-config reading BIOS (default)
 
         ALC260
           hp            HP machines
           fujitsu       Fujitsu S7020
+          acer          Acer TravelMate
+          basic         fixed pin assignment (old default model)
+          auto          auto-config reading BIOS (default)
+
+        ALC262
+          fujitsu       Fujitsu Laptop
+          basic         fixed pin assignment w/o SPDIF
+          auto          auto-config reading BIOS (default)
+
+        ALC882/883/885
+          3stack-dig    3-jack with SPDIF I/O
+          6stck-dig     6-jack digital with SPDIF I/O
+          auto          auto-config reading BIOS (default)
+
+        ALC861
+          3stack        3-jack
+          3stack-dig    3-jack with SPDIF I/O
+          6stack-dig    6-jack with SPDIF I/O
+          auto          auto-config reading BIOS (default)
 
         CMI9880
           minimal       3-jack in back
@@ -710,6 +737,28 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
           allout        5-jack in back, 2-jack in front, SPDIF out
           auto          auto-config reading BIOS (default)
 
+        AD1981
+          basic         3-jack (default)
+          hp            HP nx6320
+
+        AD1986A
+          6stack        6-jack, separate surrounds (default)
+          3stack        3-stack, shared surrounds
+          laptop        2-channel only (FSC V2060, Samsung M50)
+          laptop-eapd   2-channel with EAPD (Samsung R65, ASUS A6J)
+
+        AD1988
+          6stack        6-jack
+          6stack-dig    ditto with SPDIF
+          3stack        3-jack
+          3stack-dig    ditto with SPDIF
+          laptop        3-jack with hp-jack automute
+          laptop-dig    ditto with SPDIF
+          auto          auto-confgi reading BIOS (default)
+
+        STAC7661(?)
+          vaio          Setup for VAIO FE550G/SZ110
+
     If the default configuration doesn't work and one of the above
     matches with your device, report it together with the PCI
     subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
@@ -723,6 +772,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
             (Usually SD_LPLIB register is more accurate than the
             position buffer.)
 
+    NB: If you get many "azx_get_response timeout" messages at
+    loading, it's likely a problem of interrupts (e.g. ACPI irq
+    routing).  Try to boot with options like "pci=noacpi".  Also, you
+    can try "single_cmd=1" module option.  This will switch the
+    communication method between HDA controller and codecs to the
+    single immediate commands instead of CORB/RIRB.  Basically, the
+    single command mode is provided only for BIOS, and you won't get
+    unsolicited events, too.  But, at least, this works independently
+    from the irq.  Remember this is a last resort, and should be
+    avoided as much as possible...
+    
     The power-management is supported.
 
   Module snd-hdsp
@@ -802,6 +862,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   ------------------
 
     Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
+                        * MidiMan M Audio Revolution 5.1
                         * MidiMan M Audio Revolution 7.1
                         * AMP Ltd AUDIO2000
                         * TerraTec Aureon 5.1 Sky
@@ -810,6 +871,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                         * TerraTec Phase 22
                         * TerraTec Phase 28
                         * AudioTrak Prodigy 7.1
+                        * AudioTrak Prodigy 7.1LT
                         * AudioTrak Prodigy 192
                         * Pontis MS300
                         * Albatron K8X800 Pro II 
@@ -820,9 +882,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                         * Shuttle SN25P
 
     model       - Use the given board model, one of the following:
-                  revo71, amp2000, prodigy71, prodigy192, aureon51,
-                  aureon71, universe, k8x800, phase22, phase28, ms300,
-                  av710
+                  revo51, revo71, amp2000, prodigy71, prodigy71lt,
+                  prodigy192, aureon51, aureon71, universe,
+                  k8x800, phase22, phase28, ms300, av710
 
     This module supports multiple cards and autoprobe.
 
@@ -1353,6 +1415,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     vid             - Vendor ID for the device (optional)
     pid             - Product ID for the device (optional)
+    device_setup    - Device specific magic number (optional)
+                    - Influence depends on the device
+                    - Default: 0x0000 
 
     This module supports multiple devices, autoprobe and hotplugging.