aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/scsi/in2000.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi/in2000.txt')
-rw-r--r--Documentation/scsi/in2000.txt202
1 files changed, 202 insertions, 0 deletions
diff --git a/Documentation/scsi/in2000.txt b/Documentation/scsi/in2000.txt
new file mode 100644
index 000000000000..80f104042645
--- /dev/null
+++ b/Documentation/scsi/in2000.txt
@@ -0,0 +1,202 @@
1
2UPDATE NEWS: version 1.33 - 26 Aug 98
3
4 Interrupt management in this driver has become, over
5 time, increasingly odd and difficult to explain - this
6 has been mostly due to my own mental inadequacies. In
7 recent kernels, it has failed to function at all when
8 compiled for SMP. I've fixed that problem, and after
9 taking a fresh look at interrupts in general, greatly
10 reduced the number of places where they're fiddled
11 with. Done some heavy testing and it looks very good.
12 The driver now makes use of the __initfunc() and
13 __initdata macros to save about 4k of kernel memory.
14 Once again, the same code works for both 2.0.xx and
15 2.1.xx kernels.
16
17UPDATE NEWS: version 1.32 - 28 Mar 98
18
19 Removed the check for legal IN2000 hardware versions:
20 It appears that the driver works fine with serial
21 EPROMs (the 8-pin chip that defines hardware rev) as
22 old as 2.1, so we'll assume that all cards are OK.
23
24UPDATE NEWS: version 1.31 - 6 Jul 97
25
26 Fixed a bug that caused incorrect SCSI status bytes to be
27 returned from commands sent to LUN's greater than 0. This
28 means that CDROM changers work now! Fixed a bug in the
29 handling of command-line arguments when loaded as a module.
30 Also put all the header data in in2000.h where it belongs.
31 There are no longer any differences between this driver in
32 the 2.1.xx source tree and the 2.0.xx tree, as of 2.0.31
33 and 2.1.45 (or is it .46?) - this makes things much easier
34 for me...
35
36UPDATE NEWS: version 1.30 - 14 Oct 96
37
38 Fixed a bug in the code that sets the transfer direction
39 bit (DESTID_DPD in the WD_DESTINATION_ID register). There
40 are quite a few SCSI commands that do a write-to-device;
41 now we deal with all of them correctly. Thanks to Joerg
42 Dorchain for catching this one.
43
44UPDATE NEWS: version 1.29 - 24 Sep 96
45
46 The memory-mapped hardware on the card is now accessed via
47 the 'readb()' and 'readl()' macros - required by the new
48 memory management scheme in the 2.1.x kernel series.
49 As suggested by Andries Brouwer, 'bios_param()' no longer
50 forces an artificial 1023 track limit on drives. Also
51 removed some kludge-code left over from struggles with
52 older (buggy) compilers.
53
54UPDATE NEWS: version 1.28 - 07 May 96
55
56 Tightened up the "interrupts enabled/disabled" discipline
57 in 'in2000_queuecommand()' and maybe 1 or 2 other places.
58 I _think_ it may have been a little too lax, causing an
59 occasional crash during full moon. A fully functional
60 /proc interface is now in place - if you want to play
61 with it, start by doing 'cat /proc/scsi/in2000/0'. You
62 can also use it to change a few run-time parameters on
63 the fly, but it's mostly for debugging. The curious
64 should take a good look at 'in2000_proc_info()' in the
65 in2000.c file to get an understanding of what it's all
66 about; I figure that people who are really into it will
67 want to add features suited to their own needs...
68 Also, sync is now DISABLED by default.
69
70UPDATE NEWS: version 1.27 - 10 Apr 96
71
72 Fixed a well-hidden bug in the adaptive-disconnect code
73 that would show up every now and then during extreme
74 heavy loads involving 2 or more simultaneously active
75 devices. Thanks to Joe Mack for keeping my nose to the
76 grindstone on this one.
77
78UPDATE NEWS: version 1.26 - 07 Mar 96
79
80 1.25 had a nasty bug that bit people with swap partitions
81 and tape drives. Also, in my attempt to guess my way
82 through Intel assembly language, I made an error in the
83 inline code for IO writes. Made a few other changes and
84 repairs - this version (fingers crossed) should work well.
85
86UPDATE NEWS: version 1.25 - 05 Mar 96
87
88 Kernel 1.3.70 interrupt mods added; old kernels still OK.
89 Big help from Bill Earnest and David Willmore on speed
90 testing and optimizing: I think there's a real improvement
91 in this area.
92 New! User-friendly command-line interface for LILO and
93 module loading - the old method is gone, so you'll need
94 to read the comments for 'setup_strings' near the top
95 of in2000.c. For people with CDROM's or other devices
96 that have a tough time with sync negotiation, you can
97 now selectively disable sync on individual devices -
98 search for the 'nosync' keyword in the command-line
99 comments. Some of you disable the BIOS on the card, which
100 caused the auto-detect function to fail; there is now a
101 command-line option to force detection of a ROM-less card.
102
103UPDATE NEWS: version 1.24a - 24 Feb 96
104
105 There was a bug in the synchronous transfer code. Only
106 a few people downloaded before I caught it - could have
107 been worse.
108
109UPDATE NEWS: version 1.24 - 23 Feb 96
110
111 Lots of good changes. Advice from Bill Earnest resulted
112 in much better detection of cards, more efficient usage
113 of the fifo, and (hopefully) faster data transfers. The
114 jury is still out on speed - I hope it's improved some.
115 One nifty new feature is a cool way of doing disconnect/
116 reselect. The driver defaults to what I'm calling
117 'adaptive disconnect' - meaning that each command is
118 evaluated individually as to whether or not it should be
119 run with the option to disconnect/reselect (if the device
120 chooses), or as a "SCSI-bus-hog". When several devices
121 are operating simultaneously, disconnects are usually an
122 advantage. In a single device system, or if only 1 device
123 is being accessed, transfers usually go faster if disconnects
124 are not allowed.
125
126
127
128The default arguments (you get these when you don't give an 'in2000'
129command-line argument, or you give a blank argument) will cause
130the driver to do adaptive disconnect, synchronous transfers, and a
131minimum of debug messages. If you want to fool with the options,
132search for 'setup_strings' near the top of the in2000.c file and
133check the 'hostdata->args' section in in2000.h - but be warned! Not
134everything is working yet (some things will never work, probably).
135I believe that disabling disconnects (DIS_NEVER) will allow you
136to choose a LEVEL2 value higher than 'L2_BASIC', but I haven't
137spent a lot of time testing this. You might try 'ENABLE_CLUSTERING'
138to see what happens: my tests showed little difference either way.
139There's also a define called 'DEFAULT_SX_PER'; this sets the data
140transfer speed for the asynchronous mode. I've put it at 500 ns
141despite the fact that the card could handle settings of 376 or
142252, because higher speeds may be a problem with poor quality
143cables or improper termination; 500 ns is a compromise. You can
144choose your own default through the command-line with the
145'period' keyword.
146
147
148------------------------------------------------
149*********** DIP switch settings **************
150------------------------------------------------
151
152 sw1-1 sw1-2 BIOS address (hex)
153 -----------------------------------------
154 off off C8000 - CBFF0
155 on off D8000 - DBFF0
156 off on D0000 - D3FF0
157 on on BIOS disabled
158
159 sw1-3 sw1-4 IO port address (hex)
160 ------------------------------------
161 off off 220 - 22F
162 on off 200 - 20F
163 off on 110 - 11F
164 on on 100 - 10F
165
166 sw1-5 sw1-6 sw1-7 Interrupt
167 ------------------------------
168 off off off 15
169 off on off 14
170 off off on 11
171 off on on 10
172 on - - disabled
173
174 sw1-8 function depends on BIOS version. In earlier versions this
175 controlled synchronous data transfer support for MSDOS:
176 off = disabled
177 on = enabled
178 In later ROMs (starting with 01.3 in April 1994) sw1-8 controls
179 the "greater than 2 disk drive" feature that first appeared in
180 MSDOS 5.0 (ignored by Linux):
181 off = 2 drives maximum
182 on = 7 drives maximum
183
184 sw1-9 Floppy controller
185 --------------------------
186 off disabled
187 on enabled
188
189------------------------------------------------
190
191 I should mention that Drew Eckhardt's 'Generic NCR5380' sources
192 were my main inspiration, with lots of reference to the IN2000
193 driver currently distributed in the kernel source. I also owe
194 much to a driver written by Hamish Macdonald for Linux-m68k(!).
195 And to Eric Wright for being an ALPHA guinea pig. And to Bill
196 Earnest for 2 tons of great input and information. And to David
197 Willmore for extensive 'bonnie' testing. And to Joe Mack for
198 continual testing and feedback.
199
200
201 John Shifflett jshiffle@netcom.com
202