1 files changed, 144 insertions, 0 deletions

diff --git a/Documentation/scsi/ChangeLog.sym53c8xx_2 b/Documentation/scsi/ChangeLog.sym53c8xx_2
new file mode 100644
index 000000000000..18a5d712a56a
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.sym53c8xx_2
@@ -0,0 +1,144 @@
+Sat Dec 30 21:30 2000 Gerard Roudier 
+        * version sym-2.1.0-20001230
+        - Initial release of SYM-2.
+
+Mon Jan 08 21:30 2001 Gerard Roudier 
+        * version sym-2.1.1-20010108
+        - Change a couple of defines containing ncr or NCR by their 
+          equivalent containing sym or SYM instead.
+
+Sun Jan 14 22:30 2001 Gerard Roudier 
+        * version sym-2.1.2-20010114
+        - Fix a couple of printfs:
+          * Add the target number to the display of transfer parameters.
+          * Make the display of TCQ and queue depth clearer.
+
+Wed Jan 17 23:30 2001 Gerard Roudier 
+        * version sym-2.1.3-20010117
+        - Wrong residual values were returned in some situations.
+          This broke cdrecord with linux-2.4.0, for example.
+
+Sat Jan 20 18:00 2001 Gerard Roudier 
+        * version sym-2.1.4-20010120
+        - Add year 2001 to Copyright.
+        - A tiny bug in the dma memory freeing path has been fixed.
+          (Driver unload failed with a bad address reference).
+
+Wed Jan 24 21:00 2001 Gerard Roudier 
+        * version sym-2.1.5-20010124
+        - Make the driver work under Linux-2.4.x when statically linked 
+          with the kernel.
+        - Check against memory allocation failure for SCRIPTZ and add the 
+          missing free of this memory on instance detach.
+        - Check against GPIO3 pulled low for HVD controllers (driver did 
+          just the opposite).
+          Misdetection of BUS mode was triggered on module reload only, 
+          since BIOS settings were trusted instead on first load.
+
+Wed Feb 7 21:00 2001 Gerard Roudier 
+        * version sym-2.1.6-20010207
+        - Call pci_enable_device() as wished by kernel maintainers.
+        - Change the sym_queue_scsiio() interface.
+          This is intended to simplify portability.
+        - Move the code intended to deal with the dowloading of SCRIPTS 
+          from SCRIPTS :) in the patch method (was wrongly placed in 
+          the SCRIPTS setup method).
+        - Add a missing cpu_to_scr()  (np->abort_tbl.addr)
+        - Remove a wrong cpu_to_scr() (np->targtbl_ba)
+        - Cleanup a bit the PPR failure recovery code.
+
+Sat Mar 3 21:00 2001 Gerard Roudier 
+        - Add option SYM_OPT_ANNOUNCE_TRANSFER_RATE and move the 
+          corresponding code to file sym_misc.c.
+          Also move the code that sniffes INQUIRY to sym_misc.c.
+          This allows to share the corresponding code with NetBSD 
+          without polluating the core driver source (sym_hipd.c).
+        - Add optionnal code that handles IO timeouts from the driver.
+          (not used under Linux, but required for NetBSD)
+        - Donnot assume any longer that PAGE_SHIFT and PAGE_SIZE are 
+          defined at compile time, as at least NetBSD uses variables 
+          in memory for that.
+        - Refine a work-around for the C1010-33 that consists in 
+          disabling internal LOAD/STORE. Was applied up to revision 1.
+          Is now only applied to revision 0.
+        - Some code reorganisations due to code moves between files.
+
+Tues Apr 10 21:00 2001 Gerard Roudier 
+        * version sym-2.1.9-20010412
+        - Reset 53C896 and 53C1010 chip according to the manual.
+          (i.e.: set the ABRT bit in ISTAT if SCRIPTS are running)
+        - Set #LUN in request sense only if scsi version <= 2 and
+          #LUN <= 7.
+        - Set busy_itl in LCB to 1 if the LCB is allocated and a 
+          SCSI command is active. This is a simplification.
+        - In sym_hcb_free(), do not scan the free_ccbq if no CCBs 
+          has been allocated. This fixes a panic if attach failed.
+        - Add DT/ST (double/simple transition) in the transfer 
+          negotiation announce.
+        - Forces the max number of tasks per LUN to at least 64.
+        - Use pci_set_dma_mask() for linux-2.4.3 and above.
+        - A couple of comments fixes.
+
+Wed May 22:00 2001 Gerard Roudier 
+        * version sym-2.1.10-20010509
+        - Mask GPCNTL against 0x1c (was 0xfc) for the reading of the NVRAM.
+          This ensure LEDC bit will not be set on 896 and later chips.
+          Fix sent by Chip Salzenberg <chip@perlsupport.com>.
+        - Define the number of PQS BUSes supported.
+          Fix sent by Stig Telfer <stig@api-networks.com>
+        - Miscellaneous common code rearrangements due to NetBSD accel 
+          ioctl support, without impact on Linux (hopefully).
+
+Mon July 2 12:00 2001 Gerard Roudier 
+        * version sym-2.1.11-20010702
+        - Add Tekram 390 U2B/U2W SCSI LED handling.
+          Submitted by Chip Salzenberg <chip@valinux.com>
+        - Add call to scsi_set_pci_device() for kernels >= 2.4.4.
+        - Check pci dma mapping failures and complete the IO with some 
+          error when such mapping fails.
+        - Fill in instance->max_cmd_len for kernels > 2.4.0.
+        - A couple of tiny fixes ...
+
+Sun Sep 9 18:00 2001 Gerard Roudier 
+        * version sym-2.1.12-20010909
+        - Change my email address.
+        - Add infrastructure for the forthcoming 64 bit DMA addressing support.
+          (Based on PCI 64 bit patch from David S. Miller)
+        - Donnot use anymore vm_offset_t type.
+
+Sat Sep 15 20:00 2001 Gerard Roudier 
+        * version sym-2.1.13-20010916
+        - Add support for 64 bit DMA addressing using segment registers.
+          16 registers for up to 4 GB x 16 -> 64 GB.
+
+Sat Sep 22 12:00 2001 Gerard Roudier 
+        * version sym-2.1.14-20010922
+        - Complete rewrite of the eh handling. The driver is now using a 
+          semaphore in order to behave synchronously as required by the eh 
+          threads. A timer is also used to prevent from waiting indefinitely.
+
+Sun Sep 30 17:00 2001 Gerard Roudier 
+        * version sym-2.1.15-20010930
+        - Include <linux/module.h> unconditionnaly as expected by latest
+          kernels.
+        - Use del_timer_sync() for recent kernels to kill the driver timer 
+          on module release.
+
+Sun Oct 28 15:00 2001 Gerard Roudier 
+        * version sym-2.1.16-20011028
+        - Slightly simplify driver configuration.
+        - Prepare a new patch against linux-2.4.13.
+
+Sat Nov 17 10:00 2001 Gerard Roudier 
+        * version sym-2.1.17
+        - Fix a couple of gcc/gcc3 warnings.
+        - Allocate separately from the HCB the array for CCBs hashed by DSA.
+          All driver memory allocations are now not greater than 1 PAGE 
+          even on PPC64 / 4KB PAGE surprising setup.
+
+Sat Dec 01 18:00 2001 Gerard Roudier 
+        * version sym-2.1.17a
+        - Use u_long instead of U32 for the IO base cookie. This is more 
+          consistent with what archs are expecting.
+        - Use MMIO per default for Power PC instead of some fake normal IO,
+          as Paul Mackerras stated that MMIO works fine now on this arch.