13 files changed, 129 insertions, 410 deletions

diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 9ad9ddeb384c..2cc3c7733a2f 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -1,7 +1,5 @@
 00-INDEX
         - this file
-3c359.txt
-        - information on the 3Com TokenLink Velocity XL (3c5359) driver.
 3c505.txt
         - information on the 3Com EtherLink Plus (3c505) driver.
 3c509.txt
@@ -142,8 +140,6 @@ netif-msg.txt
         - Design of the network interface message level setting (NETIF_MSG_*).
 nfc.txt
         - The Linux Near Field Communication (NFS) subsystem.
-olympic.txt
-        - IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
 openvswitch.txt
         - Open vSwitch developer documentation.
 operstates.txt
@@ -184,8 +180,6 @@ skfp.txt
         - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
         - the driver for SMC's 9000 series of Ethernet cards
-smctr.txt
-        - SMC TokenCard TokenRing Linux driver info.
 spider-net.txt
         - README for the Spidernet Driver (as found in PS3 / Cell BE).
 stmmac.txt
@@ -200,8 +194,6 @@ tcp-thin.txt
         - kernel tuning options for low rate 'thin' TCP streams.
 tlan.txt
         - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
-tms380tr.txt
-        - SysKonnect Token Ring ISA/PCI adapter driver info.
 tproxy.txt
         - Transparent proxy support user guide.
 tuntap.txt
diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt
deleted file mode 100644
index dadfe8147ab8..000000000000
--- a/Documentation/networking/3c359.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-
-3COM PCI TOKEN LINK VELOCITY XL TOKEN RING CARDS README
-
-Release 0.9.0 - Release   
-        Jul 17th 2000 Mike Phillips 
-
-        1.2.0 - Final
-        Feb 17th 2002 Mike Phillips 
-        Updated for submission to the 2.4.x kernel.
-
-Thanks:
-        Terry Murphy from 3Com for tech docs and support,
-        Adam D. Ligas for testing the driver.
- 
-Note:
-        This driver will NOT work with the 3C339 Token Ring cards, you need
-to use the tms380 driver instead.
-
-Options:
-
-The driver accepts three options: ringspeed, pkt_buf_sz and message_level.
-
-These options can be specified differently for each card found. 
-
-ringspeed:  Has one of three settings 0 (default), 4 or 16.  0 will 
-make the card autosense the ringspeed and join at the appropriate speed, 
-this will be the default option for most people.  4 or 16 allow you to 
-explicitly force the card to operate at a certain speed.  The card will fail 
-if you try to insert it at the wrong speed. (Although some hubs will allow 
-this so be *very* careful).  The main purpose for explicitly setting the ring
-speed is for when the card is first on the ring.  In autosense mode, if the card
-cannot detect any active monitors on the ring it will open at the same speed as
-its last opening. This can be hazardous if this speed does not match the speed
-you want the ring to operate at.  
-
-pkt_buf_sz:  This is this initial receive buffer allocation size.  This will
-default to 4096 if no value is entered. You may increase performance of the 
-driver by setting this to a value larger than the network packet size, although
-the driver now re-sizes buffers based on MTU settings as well. 
-
-message_level: Controls level of messages created by the driver. Defaults to 0:
-which only displays start-up and critical messages.  Presently any non-zero 
-value will display all soft messages as well.  NB This does not turn 
-debugging messages on, that must be done by modified the source code.
-
-Variable MTU size:
-
-The driver can handle a MTU size up to either 4500 or 18000 depending upon 
-ring speed.  The driver also changes the size of the receive buffers as part
-of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
-to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring 
-position = 296,000 bytes of memory space, plus of course anything 
-necessary for the tx sk_buff's.  Remember this is per card, so if you are
-building routers, gateway's etc, you could start to use a lot of memory
-real fast.
-
-2/17/02 Mike Phillips
-
diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt
index dcc9eaf59395..fbf722e15ac3 100644
--- a/Documentation/networking/3c509.txt
+++ b/Documentation/networking/3c509.txt
@@ -25,7 +25,6 @@ models:
   3c509B (later revision of the ISA card; supports full-duplex)
   3c589 (PCMCIA)
   3c589B (later revision of the 3c589; supports full-duplex)
-  3c529 (MCA)
   3c579 (EISA)
 
 Large portions of this documentation were heavily borrowed from the guide
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 221ad0cdf11f..75a592365af9 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -1,5 +1,3 @@
-[state: 21-08-2011]
-
 BATMAN-ADV
 ----------
 
@@ -67,18 +65,19 @@ To deactivate an interface you have  to  write  "none"  into  its
 All  mesh  wide  settings  can be found in batman's own interface
 folder:
 
-#  ls  /sys/class/net/bat0/mesh/
-# aggregated_ogms   fragmentation gw_sel_class   vis_mode
-# ap_isolation      gw_bandwidth  hop_penalty
-# bonding           gw_mode       orig_interval
+# ls /sys/class/net/bat0/mesh/
+# aggregated_ogms        gw_bandwidth           log_level
+# ap_isolation           gw_mode                orig_interval
+# bonding                gw_sel_class           routing_algo
+# bridge_loop_avoidance  hop_penalty            vis_mode
+# fragmentation
 
 
 There is a special folder for debugging information:
 
 #  ls /sys/kernel/debug/batman_adv/bat0/
-#  gateways     socket        transtable_global  vis_data
-#  originators  softif_neigh  transtable_local
-
+# bla_claim_table    log                socket             transtable_local
+# gateways           originators        transtable_global  vis_data
 
 Some of the files contain all sort of status information  regard-
 ing  the  mesh  network.  For  example, you can view the table of
@@ -202,12 +201,13 @@ abled  during run time. Following log_levels are defined:
 1 - Enable messages related to routing / flooding / broadcasting
 2 - Enable messages related to route added / changed / deleted
 4 - Enable messages related to translation table operations
-7 - Enable all messages
+8 - Enable messages related to bridge loop avoidance
+15 - enable all messages
 
 The debug output can be changed at runtime  using  the  file
 /sys/class/net/bat0/mesh/log_level. e.g.
 
-# echo 2 > /sys/class/net/bat0/mesh/log_level
+# echo 6 > /sys/class/net/bat0/mesh/log_level
 
 will enable debug messages for when routes change.
 
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 56ca3b75376e..ac295399f0d4 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -649,7 +649,7 @@ solution for a couple of reasons:
   The CAN device must be configured via netlink interface. The supported
   netlink message types are defined and briefly described in
   "include/linux/can/netlink.h". CAN link support for the program "ip"
-  of the IPROUTE2 utility suite is avaiable and it can be used as shown
+  of the IPROUTE2 utility suite is available and it can be used as shown
   below:
 
   - Setting CAN device properties:
diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt
index f648eb265188..d52af53efdc5 100644
--- a/Documentation/networking/fore200e.txt
+++ b/Documentation/networking/fore200e.txt
@@ -11,12 +11,10 @@ i386, alpha (untested), powerpc, sparc and sparc64 archs.
 
 The intent is to enable the use of different models of FORE adapters at the
 same time, by hosts that have several bus interfaces (such as PCI+SBUS,
-PCI+MCA or PCI+EISA).
+or PCI+EISA).
 
 Only PCI and SBUS devices are currently supported by the driver, but support
-for other bus interfaces such as EISA should not be too hard to add (this may
-be more tricky for the MCA bus, though, as FORE made some MCA-specific
-modifications to the adapter's AALI interface).
+for other bus interfaces such as EISA should not be too hard to add.
 
 
 Firmware Copyright Notice
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
index 1dc1c24a7547..703cf4370c79 100644
--- a/Documentation/networking/ieee802154.txt
+++ b/Documentation/networking/ieee802154.txt
@@ -4,15 +4,22 @@
 
 Introduction
 ============
+The IEEE 802.15.4 working group focuses on standartization of bottom
+two layers: Medium Accsess Control (MAC) and Physical (PHY). And there
+are mainly two options available for upper layers:
+ - ZigBee - proprietary protocol from ZigBee Alliance
+ - 6LowPAN - IPv6 networking over low rate personal area networks
 
 The Linux-ZigBee project goal is to provide complete implementation
-of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack
+of IEEE 802.15.4 and 6LoWPAN protocols. IEEE 802.15.4 is a stack
 of protocols for organizing Low-Rate Wireless Personal Area Networks.
 
-Currently only IEEE 802.15.4 layer is implemented. We have chosen
-to use plain Berkeley socket API, the generic Linux networking stack
-to transfer IEEE 802.15.4 messages and a special protocol over genetlink
-for configuration/management
+The stack is composed of three main parts:
+ - IEEE 802.15.4 layer;  We have chosen to use plain Berkeley socket API,
+   the generic Linux networking stack to transfer IEEE 802.15.4 messages
+   and a special protocol over genetlink for configuration/management
+ - MAC - provides access to shared channel and reliable data delivery
+ - PHY - represents device drivers
 
 
 Socket API
@@ -29,15 +36,6 @@ or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
 One can use SOCK_RAW for passing raw data towards device xmit function. YMMV.
 
 
-MLME - MAC Level Management
-============================
-
-Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
-See the include/net/nl802154.h header. Our userspace tools package
-(see above) provides CLI configuration utility for radio interfaces and simple
-coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
-
-
 Kernel side
 =============
 
@@ -51,6 +49,15 @@ Like with WiFi, there are several types of devices implementing IEEE 802.15.4.
 Those types of devices require different approach to be hooked into Linux kernel.
 
 
+MLME - MAC Level Management
+============================
+
+Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
+See the include/net/nl802154.h header. Our userspace tools package
+(see above) provides CLI configuration utility for radio interfaces and simple
+coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
+
+
 HardMAC
 =======
 
@@ -73,11 +80,47 @@ We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c
 SoftMAC
 =======
 
-We are going to provide intermediate layer implementing IEEE 802.15.4 MAC
-in software. This is currently WIP.
+The MAC is the middle layer in the IEEE 802.15.4 Linux stack. This moment it
+provides interface for drivers registration and management of slave interfaces.
+
+NOTE: Currently the only monitor device type is supported - it's IEEE 802.15.4
+stack interface for network sniffers (e.g. WireShark).
+
+This layer is going to be extended soon.
 
 See header include/net/mac802154.h and several drivers in drivers/ieee802154/.
 
+
+Device drivers API
+==================
+
+The include/net/mac802154.h defines following functions:
+ - struct ieee802154_dev *ieee802154_alloc_device
+   (size_t priv_size, struct ieee802154_ops *ops):
+   allocation of IEEE 802.15.4 compatible device
+
+ - void ieee802154_free_device(struct ieee802154_dev *dev):
+   freeing allocated device
+
+ - int ieee802154_register_device(struct ieee802154_dev *dev):
+   register PHY in the system
+
+ - void ieee802154_unregister_device(struct ieee802154_dev *dev):
+   freeing registered PHY
+
+Moreover IEEE 802.15.4 device operations structure should be filled.
+
+Fake drivers
+============
+
+In addition there are two drivers available which simulate real devices with
+HardMAC (fakehard) and SoftMAC (fakelb - IEEE 802.15.4 loopback driver)
+interfaces. This option provides possibility to test and debug stack without
+usage of real hardware.
+
+See sources in drivers/ieee802154 folder for more details.
+
+
 6LoWPAN Linux implementation
 ============================
 
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index bd80ba5847d2..6f896b94abdc 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
         (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
         if it is <= 0.
         Possible values are [-31, 31], inclusive.
-        Default: 2
+        Default: 1
 
 tcp_allowed_congestion_control - STRING
         Show/set the congestion control choices available to non-privileged
@@ -190,6 +190,20 @@ tcp_cookie_size - INTEGER
 tcp_dsack - BOOLEAN
         Allows TCP to send "duplicate" SACKs.
 
+tcp_early_retrans - INTEGER
+        Enable Early Retransmit (ER), per RFC 5827. ER lowers the threshold
+        for triggering fast retransmit when the amount of outstanding data is
+        small and when no previously unsent data can be transmitted (such
+        that limited transmit could be used).
+        Possible values:
+                0 disables ER
+                1 enables ER
+                2 enables ER but delays fast recovery and fast retransmit
+                  by a fourth of RTT. This mitigates connection falsely
+                  recovers when network has a small degree of reordering
+                  (less than 3 packets).
+        Default: 2
+
 tcp_ecn - INTEGER
         Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
         used when both ends of the TCP flow support it. It is useful to
@@ -410,7 +424,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
         net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
         automatic tuning of that socket's receive buffer size, in which
         case this value is ignored.
-        Default: between 87380B and 4MB, depending on RAM size.
+        Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
         Enable select acknowledgments (SACKS).
@@ -1287,13 +1301,22 @@ bridge-nf-call-ip6tables - BOOLEAN
 bridge-nf-filter-vlan-tagged - BOOLEAN
         1 : pass bridged vlan-tagged ARP/IP/IPv6 traffic to {arp,ip,ip6}tables.
         0 : disable this.
-        Default: 1
+        Default: 0
 
 bridge-nf-filter-pppoe-tagged - BOOLEAN
         1 : pass bridged pppoe-tagged IP/IPv6 traffic to {ip,ip6}tables.
         0 : disable this.
-        Default: 1
+        Default: 0
 
+bridge-nf-pass-vlan-input-dev - BOOLEAN
+        1: if bridge-nf-filter-vlan-tagged is enabled, try to find a vlan
+        interface on the bridge and set the netfilter input device to the vlan.
+        This allows use of e.g. "iptables -i br0.1" and makes the REDIRECT
+        target work with vlan-on-top-of-bridge interfaces.  When no matching
+        vlan interface is found, or this switch is off, the input device is
+        set to the bridge interface.
+        0: disable bridge netfilter vlan interface lookup.
+        Default: 0
 
 proc/sys/net/sctp/* Variables:
 
@@ -1484,11 +1507,8 @@ addr_scope_policy - INTEGER
 
 
 /proc/sys/net/core/*
-dev_weight - INTEGER
-        The maximum number of packets that kernel can handle on a NAPI
-        interrupt, it's a Per-CPU variable.
+        Please see: Documentation/sysctl/net.txt for descriptions of these entries.
 
-        Default: 64
 
 /proc/sys/net/unix/*
 max_dgram_qlen - INTEGER
diff --git a/Documentation/networking/mac80211-auth-assoc-deauth.txt b/Documentation/networking/mac80211-auth-assoc-deauth.txt
index e0a2aa585ca3..d7a15fe91bf7 100644
--- a/Documentation/networking/mac80211-auth-assoc-deauth.txt
+++ b/Documentation/networking/mac80211-auth-assoc-deauth.txt
@@ -23,7 +23,7 @@ BA session stop & deauth/disassoc frames
 end note
 end
 
-mac80211->driver: config(channel, non-HT)
+mac80211->driver: config(channel, channel type)
 mac80211->driver: bss_info_changed(set BSSID, basic rate bitmap)
 mac80211->driver: sta_state(AP, exists)
 
@@ -51,7 +51,7 @@ note over mac80211,driver: cleanup like for authenticate
 end
 
 alt not previously authenticated (FT)
-mac80211->driver: config(channel, non-HT)
+mac80211->driver: config(channel, channel type)
 mac80211->driver: bss_info_changed(set BSSID, basic rate bitmap)
 mac80211->driver: sta_state(AP, exists)
 mac80211->driver: sta_state(AP, authenticated)
@@ -67,10 +67,6 @@ end
 
 mac80211->driver: set up QoS parameters
 
-alt is HT channel
-mac80211->driver: config(channel, HT params)
-end
-
 mac80211->driver: bss_info_changed(QoS, HT, associated with AID)
 mac80211->userspace: associated
 
@@ -95,5 +91,5 @@ mac80211->driver: sta_state(AP,exists)
 mac80211->driver: sta_state(AP,not-exists)
 mac80211->driver: turn off powersave
 mac80211->driver: bss_info_changed(clear BSSID, not associated, no QoS, ...)
-mac80211->driver: config(non-HT channel type)
+mac80211->driver: config(channel type to non-HT)
 mac80211->userspace: disconnected
diff --git a/Documentation/networking/olympic.txt b/Documentation/networking/olympic.txt
deleted file mode 100644
index b95b5bf96751..000000000000
--- a/Documentation/networking/olympic.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-
-IBM PCI Pit/Pit-Phy/Olympic CHIPSET BASED TOKEN RING CARDS README
-
-Release 0.2.0 - Release    
-        June 8th 1999 Peter De Schrijver & Mike Phillips
-Release 0.9.C - Release
-        April 18th 2001 Mike Phillips
-
-Thanks:
-Erik De Cock, Adrian Bridgett and Frank Fiene for their 
-patience and testing.
-Donald Champion for the cardbus support
-Kyle Lucke for the dma api changes.   
-Jonathon Bitner for hardware support. 
-Everybody on linux-tr for their continued support.  
- 
-Options:
-
-The driver accepts four options: ringspeed, pkt_buf_sz,  
-message_level and network_monitor.
-
-These options can be specified differently for each card found. 
-
-ringspeed:  Has one of three settings 0 (default), 4 or 16.  0 will 
-make the card autosense the ringspeed and join at the appropriate speed, 
-this will be the default option for most people.  4 or 16 allow you to 
-explicitly force the card to operate at a certain speed.  The card will fail 
-if you try to insert it at the wrong speed. (Although some hubs will allow 
-this so be *very* careful).  The main purpose for explicitly setting the ring
-speed is for when the card is first on the ring.  In autosense mode, if the card
-cannot detect any active monitors on the ring it will not open, so you must 
-re-init the card at the appropriate speed.  Unfortunately at present the only
-way of doing this is rmmod and insmod which is a bit tough if it is compiled
-in the kernel.
-
-pkt_buf_sz:  This is this initial receive buffer allocation size.  This will
-default to 4096 if no value is entered. You may increase performance of the 
-driver by setting this to a value larger than the network packet size, although
-the driver now re-sizes buffers based on MTU settings as well. 
-
-message_level: Controls level of messages created by the driver. Defaults to 0:
-which only displays start-up and critical messages.  Presently any non-zero 
-value will display all soft messages as well.  NB This does not turn 
-debugging messages on, that must be done by modified the source code.
-
-network_monitor: Any non-zero value will provide a quasi network monitoring 
-mode.  All unexpected MAC frames (beaconing etc.) will be received
-by the driver and the source and destination addresses printed. 
-Also an entry will be added in  /proc/net called olympic_tr%d, where tr%d
-is the registered device name, i.e tr0, tr1, etc. This displays low
-level information about the configuration of the ring and the adapter.
-This feature has been designed for network administrators to assist in 
-the diagnosis of network / ring problems. (This used to OLYMPIC_NETWORK_MONITOR,
-but has now changed to allow each adapter to be configured differently and
-to alleviate the necessity to re-compile olympic to turn the option on).
-
-Multi-card:
-
-The driver will detect multiple cards and will work with shared interrupts,
-each card is assigned the next token ring device, i.e. tr0 , tr1, tr2.  The 
-driver should also happily reside in the system with other drivers.  It has 
-been tested with ibmtr.c running, and I personally have had one Olicom PCI 
-card and two IBM olympic cards (all on the same interrupt), all running
-together. 
-
-Variable MTU size:
-
-The driver can handle a MTU size up to either 4500 or 18000 depending upon 
-ring speed.  The driver also changes the size of the receive buffers as part
-of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
-to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring 
-position = 296,000 bytes of memory space, plus of course anything 
-necessary for the tx sk_buff's.  Remember this is per card, so if you are
-building routers, gateway's etc, you could start to use a lot of memory
-real fast.
-
-
-6/8/99 Peter De Schrijver and Mike Phillips
-
diff --git a/Documentation/networking/smctr.txt b/Documentation/networking/smctr.txt
deleted file mode 100644
index 9af25b810c1f..000000000000
--- a/Documentation/networking/smctr.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Text File for the SMC TokenCard TokenRing Linux driver (smctr.c).
-        By Jay Schulist <jschlst@samba.org>
-
-The Linux SMC Token Ring driver works with the SMC TokenCard Elite (8115T) 
-ISA and SMC TokenCard Elite/A (8115T/A) MCA adapters.
-
-Latest information on this driver can be obtained on the Linux-SNA WWW site.
-Please point your browser to: http://www.linux-sna.org
-
-This driver is rather simple to use. Select Y to Token Ring adapter support
-in the kernel configuration. A choice for SMC Token Ring adapters will
-appear. This drives supports all SMC ISA/MCA adapters. Choose this
-option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it statically answer Y instead.
-
-This driver supports multiple adapters without the need to load multiple copies
-of the driver. You should be able to load up to 7 adapters without any kernel
-modifications, if you are in need of more please contact the maintainer of this
-driver.
-
-Load the driver either by lilo/loadlin or as a module. When a module using the
-following command will suffice for most:
-
-# modprobe smctr
-smctr.c: v1.00 12/6/99 by jschlst@samba.org
-tr0: SMC TokenCard 8115T at Io 0x300, Irq 10, Rom 0xd8000, Ram 0xcc000.
-
-Now just setup the device via ifconfig and set and routes you may have. After
-this you are ready to start sending some tokens.
-
-Errata:
-1). For anyone wondering where to pick up the SMC adapters please browse
-    to http://www.smc.com
-
-2). If you are the first/only Token Ring Client on a Token Ring LAN, please
-    specify the ringspeed with the ringspeed=[4/16] module option. If no
-    ringspeed is specified the driver will attempt to autodetect the ring
-    speed and/or if the adapter is the first/only station on the ring take
-    the appropriate actions. 
-
-    NOTE: Default ring speed is 16MB UTP.
-
-3). PnP support for this adapter sucks. I recommend hard setting the 
-    IO/MEM/IRQ by the jumpers on the adapter. If this is not possible
-    load the module with the following io=[ioaddr] mem=[mem_addr]
-    irq=[irq_num].
-
-    The following IRQ, IO, and MEM settings are supported.
-
-    IO ports:
-    0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0, 0x300,
-    0x320, 0x340, 0x360, 0x380.
-
-    IRQs:
-    2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13, 14, 15
-
-    Memory addresses:
-    0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000,
-    0xB8000, 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000,
-    0xD0000, 0xD4000, 0xD8000, 0xDC000, 0xE0000, 0xE4000,
-    0xE8000, 0xEC000, 0xF0000, 0xF4000, 0xF8000, 0xFC000
-
-This driver is under the GNU General Public License. Its Firmware image is
-included as an initialized C-array and is licensed by SMC to the Linux
-users of this driver. However no warranty about its fitness is expressed or
-implied by SMC.
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index d0aeeadd264b..ab1e8d7004c5 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -111,11 +111,12 @@ and detailed below as well:
         int phy_addr;
         int interface;
         struct stmmac_mdio_bus_data *mdio_bus_data;
-        int pbl;
+        struct stmmac_dma_cfg *dma_cfg;
         int clk_csr;
         int has_gmac;
         int enh_desc;
         int tx_coe;
+        int rx_coe;
         int bugged_jumbo;
         int pmt;
         int force_sf_dma_mode;
@@ -136,10 +137,12 @@ Where:
  o pbl: the Programmable Burst Length is maximum number of beats to
        be transferred in one DMA transaction.
        GMAC also enables the 4xPBL by default.
- o clk_csr: CSR Clock range selection.
+ o clk_csr: fixed CSR Clock range selection.
  o has_gmac: uses the GMAC core.
  o enh_desc: if sets the MAC will use the enhanced descriptor structure.
  o tx_coe: core is able to perform the tx csum in HW.
+ o rx_coe: the supports three check sum offloading engine types:
+           type_1, type_2 (full csum) and no RX coe.
  o bugged_jumbo: some HWs are not able to perform the csum in HW for
                 over-sized frames due to limited buffer sizes.
                 Setting this flag the csum will be done in SW on
@@ -160,7 +163,7 @@ Where:
  o custom_cfg: this is a custom configuration that can be passed while
               initialising the resources.
 
-The we have:
+For MDIO bus The we have:
 
  struct stmmac_mdio_bus_data {
         int bus_id;
@@ -177,10 +180,28 @@ Where:
  o irqs: list of IRQs, one per PHY.
  o probed_phy_irq: if irqs is NULL, use this for probed PHY.
 
+
+For DMA engine we have the following internal fields that should be
+tuned according to the HW capabilities.
+
+struct stmmac_dma_cfg {
+        int pbl;
+        int fixed_burst;
+        int burst_len_supported;
+};
+
+Where:
+ o pbl: Programmable Burst Length
+ o fixed_burst: program the DMA to use the fixed burst mode
+ o burst_len: this is the value we put in the register
+              supported values are provided as macros in
+              linux/stmmac.h header file.
+
+---
+
 Below an example how the structures above are using on ST platforms.
 
  static struct plat_stmmacenet_data stxYYY_ethernet_platform_data = {
-        .pbl = 32,
         .has_gmac = 0,
         .enh_desc = 0,
         .fix_mac_speed = stxYYY_ethernet_fix_mac_speed,
diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt
deleted file mode 100644
index 1f73e13058df..000000000000
--- a/Documentation/networking/tms380tr.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver.
-        Text file by: Jay Schulist <jschlst@samba.org>
-
-The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA,
-SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the
-SK NET TR4/16 ISA card.
-
-Latest information on this driver can be obtained on the Linux-SNA WWW site.
-Please point your browser to: 
-http://www.linux-sna.org
-
-Many thanks to Christoph Goos for his excellent work on this driver and
-SysKonnect for donating the adapters to Linux-SNA for the testing and 
-maintenance of this device driver.
-
-Important information to be noted:
-1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be 
-   patient.
-2. This driver works very well when autoprobing for adapters. Why even 
-   think about those nasty io/int/dma settings of modprobe when the driver 
-   will do it all for you!
-
-This driver is rather simple to use. Select Y to Token Ring adapter support
-in the kernel configuration. A choice for SysKonnect Token Ring adapters will
-appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this
-option. I personally recommend compiling the driver as a module (M), but if you
-you would like to compile it statically answer Y instead.
-
-This driver supports multiple adapters without the need to load multiple copies
-of the driver. You should be able to load up to 7 adapters without any kernel
-modifications, if you are in need of more please contact the maintainer of this
-driver.
-
-Load the driver either by lilo/loadlin or as a module. When a module using the
-following command will suffice for most:
-
-# modprobe sktr
-
-This will produce output similar to the following: (Output is user specific)
-
-sktr.c: v1.01 08/29/97 by Christoph Goos
-tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17.
-tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16.
-tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5.
-
-Now just setup the device via ifconfig and set and routes you may have. After
-this you are ready to start sending some tokens.
-
-Errata:
-For anyone wondering where to pick up the SysKonnect adapters please browse
-to http://www.syskonnect.com
-
-This driver is under the GNU General Public License. Its Firmware image is 
-included as an initialized C-array and is licensed by SysKonnect to the Linux 
-users of this driver. However no warranty about its fitness is expressed or 
-implied by SysKonnect.
-
-Below find attached the setting for the SK NET TR 4/16 ISA adapters
--------------------------------------------------------------------
-
-                    ***************************
-                    ***   C O N T E N T S   ***
-                    ***************************
-
-                1) Location of DIP-Switch W1
-                2) Default settings
-                3) DIP-Switch W1 description
-
-
-  ==============================================================
-  CHAPTER 1     LOCATION OF DIP-SWITCH
-  ==============================================================
-
-UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
-þUÄÄÄÄÄÄ¿                         UÄÄÄÄÄ¿            UÄÄÄ¿         þ
-þAÄÄÄÄÄÄU                      W1 AÄÄÄÄÄU     UÄÄÄÄ¿ þ   þ         þ
-þUÄÄÄÄÄÄ¿                                     þ    þ þ   þ      UÄÄÅ¿
-þAÄÄÄÄÄÄU              UÄÄÄÄÄÄÄÄÄÄÄ¿          AÄÄÄÄU þ   þ      þ  þþ
-þUÄÄÄÄÄÄ¿              þ           þ          UÄÄÄ¿  AÄÄÄU      AÄÄÅU
-þAÄÄÄÄÄÄU              þ TMS380C26 þ          þ   þ                þ
-þUÄÄÄÄÄÄ¿              þ           þ          AÄÄÄU                AÄ¿
-þAÄÄÄÄÄÄU              þ           þ                               þ þ
-þ                      AÄÄÄÄÄÄÄÄÄÄÄU                               þ þ
-þ                                                                  þ þ
-þ                                                                  AÄU
-þ                                                                  þ
-þ                                                                  þ
-þ                                                                  þ
-þ                                                                  þ
-AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU
-             AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU  AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU
-
-  ==============================================================
-  CHAPTER 2     DEFAULT SETTINGS
-  ==============================================================
-
-          W1    1  2  3  4  5  6  7  8
-        +------------------------------+
-        | ON    X                      |
-        | OFF      X  X  X  X  X  X  X |
-        +------------------------------+
-
-        W1.1 = ON               Adapter drives address lines SA17..19
-        W1.2 - 1.5 = OFF        BootROM disabled
-        W1.6 - 1.8 = OFF        I/O address 0A20h
-
-  ==============================================================
-  CHAPTER 3     DIP SWITCH W1 DESCRIPTION
-  ==============================================================
-
-      UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿  ON
-      þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ
-      AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU  OFF
-      |AD | BootROM Addr. |  I/O      |
-      +-+-+-------+-------+-----+-----+
-        |         |             |
-        |         |             +------ 6     7     8
-        |         |                     ON    ON    ON       1900h
-        |         |                     ON    ON    OFF      0900h
-        |         |                     ON    OFF   ON       1980h
-        |         |                     ON    OFF   OFF      0980h
-        |         |                     OFF   ON    ON       1b20h
-        |         |                     OFF   ON    OFF      0b20h
-        |         |                     OFF   OFF   ON       1a20h
-        |         |                     OFF   OFF   OFF      0a20h    (+)
-        |         |
-        |         |
-        |         +-------- 2     3     4     5
-        |                   OFF   x     x     x       disabled  (+)
-        |                   ON    ON    ON    ON      C0000
-        |                   ON    ON    ON    OFF     C4000
-        |                   ON    ON    OFF   ON      C8000
-        |                   ON    ON    OFF   OFF     CC000
-        |                   ON    OFF   ON    ON      D0000
-        |                   ON    OFF   ON    OFF     D4000
-        |                   ON    OFF   OFF   ON      D8000
-        |                   ON    OFF   OFF   OFF     DC000
-        |
-        |
-        +----- 1
-               OFF    adapter does NOT drive SA<17..19>
-               ON     adapter drives SA<17..19>  (+)
-
-
-        (+) means default setting
-
-                       ********************************