1 files changed, 0 insertions, 58 deletions

diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt
deleted file mode 100644
index dadfe8147ab8..000000000000
--- a/Documentation/networking/3c359.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-
-3COM PCI TOKEN LINK VELOCITY XL TOKEN RING CARDS README
-
-Release 0.9.0 - Release   
-        Jul 17th 2000 Mike Phillips 
-
-        1.2.0 - Final
-        Feb 17th 2002 Mike Phillips 
-        Updated for submission to the 2.4.x kernel.
-
-Thanks:
-        Terry Murphy from 3Com for tech docs and support,
-        Adam D. Ligas for testing the driver.
- 
-Note:
-        This driver will NOT work with the 3C339 Token Ring cards, you need
-to use the tms380 driver instead.
-
-Options:
-
-The driver accepts three options: ringspeed, pkt_buf_sz and message_level.
-
-These options can be specified differently for each card found. 
-
-ringspeed:  Has one of three settings 0 (default), 4 or 16.  0 will 
-make the card autosense the ringspeed and join at the appropriate speed, 
-this will be the default option for most people.  4 or 16 allow you to 
-explicitly force the card to operate at a certain speed.  The card will fail 
-if you try to insert it at the wrong speed. (Although some hubs will allow 
-this so be *very* careful).  The main purpose for explicitly setting the ring
-speed is for when the card is first on the ring.  In autosense mode, if the card
-cannot detect any active monitors on the ring it will open at the same speed as
-its last opening. This can be hazardous if this speed does not match the speed
-you want the ring to operate at.  
-
-pkt_buf_sz:  This is this initial receive buffer allocation size.  This will
-default to 4096 if no value is entered. You may increase performance of the 
-driver by setting this to a value larger than the network packet size, although
-the driver now re-sizes buffers based on MTU settings as well. 
-
-message_level: Controls level of messages created by the driver. Defaults to 0:
-which only displays start-up and critical messages.  Presently any non-zero 
-value will display all soft messages as well.  NB This does not turn 
-debugging messages on, that must be done by modified the source code.
-
-Variable MTU size:
-
-The driver can handle a MTU size up to either 4500 or 18000 depending upon 
-ring speed.  The driver also changes the size of the receive buffers as part
-of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
-to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring 
-position = 296,000 bytes of memory space, plus of course anything 
-necessary for the tx sk_buff's.  Remember this is per card, so if you are
-building routers, gateway's etc, you could start to use a lot of memory
-real fast.
-
-2/17/02 Mike Phillips
-