aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.sc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.sc')
-rw-r--r--Documentation/isdn/README.sc281
1 files changed, 281 insertions, 0 deletions
diff --git a/Documentation/isdn/README.sc b/Documentation/isdn/README.sc
new file mode 100644
index 000000000000..1153cd926059
--- /dev/null
+++ b/Documentation/isdn/README.sc
@@ -0,0 +1,281 @@
1Welcome to Beta Release 2 of the combination ISDN driver for SpellCaster's
2ISA ISDN adapters. Please note this release 2 includes support for the
3DataCommute/BRI and TeleCommute/BRI adapters only and any other use is
4guaranteed to fail. If you have a DataCommute/PRI installed in the test
5computer, we recommend removing it as it will be detected but will not
6be usable. To see what we have done to Beta Release 2, see section 3.
7
8Speaking of guarantees, THIS IS BETA SOFTWARE and as such contains
9bugs and defects either known or unknown. Use this software at your own
10risk. There is NO SUPPORT for this software. Some help may be available
11through the web site or the mailing list but such support is totally at
12our own option and without warranty. If you choose to assume all and
13total risk by using this driver, we encourage you to join the beta
14mailing list.
15
16To join the Linux beta mailing list, send a message to:
17majordomo@spellcast.com with the words "subscribe linux-beta" as the only
18contents of the message. Do not include a signature. If you choose to
19remove yourself from this list at a later date, send another message to
20the same address with the words "unsubscribe linux-beta" as its only
21contents.
22
23TABLE OF CONTENTS
24-----------------
25 1. Introduction
26 1.1 What is ISDN4Linux?
27 1.2 What is different between this driver and previous drivers?
28 1.3 How do I setup my system with the correct software to use
29 this driver release?
30
31 2. Basic Operations
32 2.1 Unpacking and installing the driver
33 2.2 Read the man pages!!!
34 2.3 Installing the driver
35 2.4 Removing the driver
36 2.5 What to do if it doesn't load
37 2.6 How to setup ISDN4Linux with the driver
38
39 3. Beta Change Summaries and Miscellaneous Notes
40
411. Introduction
42---------------
43
44The revision 2 Linux driver for SpellCaster ISA ISDN adapters is built
45upon ISDN4Linux available separately or as included in Linux 2.0 and later.
46The driver will support a maximum of 4 adapters in any one system of any
47type including DataCommute/BRI, DataCommute/PRI and TeleCommute/BRI for a
48maximum of 92 channels for host. The driver is supplied as a module in
49source form and needs to be complied before it can be used. It has been
50tested on Linux 2.0.20.
51
521.1 What Is ISDN4Linux
53
54ISDN4Linux is a driver and set of tools used to access and use ISDN devices
55on a Linux platform in a common and standard way. It supports HDLC and PPP
56protocols and offers channel bundling and MLPPP support. To use ISDN4Linux
57you need to configure your kernel for ISDN support and get the ISDN4Linux
58tool kit from our web site.
59
60ISDN4Linux creates a channel pool from all of the available ISDN channels
61and therefore can function across adapters. When an ISDN4Linux compliant
62driver (such as ours) is loaded, all of the channels go into a pool and
63are used on a first-come first-served basis. In addition, individual
64channels can be specifically bound to particular interfaces.
65
661.2 What is different between this driver and previous drivers?
67
68The revision 2 driver besides adopting the ISDN4Linux architecture has many
69subtle and not so subtle functional differences from previous releases. These
70include:
71 - More efficient shared memory management combined with a simpler
72 configuration. All adapters now use only 16Kbytes of shared RAM
73 versus between 16K and 64K. New methods for using the shared RAM
74 allow us to utilize all of the available RAM on the adapter through
75 only one 16K page.
76 - Better detection of available upper memory. The probing routines
77 have been improved to better detect available shared RAM pages and
78 used pages are now locked.
79 - Decreased loading time and a wider range of I/O ports probed.
80 We have significantly reduced the amount of time it takes to load
81 the driver and at the same time doubled the number of I/O ports
82 probed increasing the likelihood of finding an adapter.
83 - We now support all ISA adapter models with a single driver instead
84 of separate drivers for each model. The revision 2 driver supports
85 the DataCommute/BRI, DataCommute/PRI and TeleCommute/BRI in any
86 combination up to a maximum of four adapters per system.
87 - On board PPP protocol support has been removed in favour of the
88 sync-PPP support used in ISDN4Linux. This means more control of
89 the protocol parameters, faster negotiation time and a more
90 familiar interface.
91
921.3 How do I setup my system with the correct software to use
93 this driver release?
94
95Before you can compile, install and use the SpellCaster ISA ISDN driver, you
96must ensure that the following software is installed, configured and running:
97
98 - Linux kernel 2.0.20 or later with the required init and ps
99 versions. Please see your distribution vendor for the correct
100 utility packages. The latest kernel is available from
101 ftp://sunsite.unc.edu/pub/Linux/kernel/v2.0/
102
103 - The latest modules package (modules-2.0.0.tar.gz) from
104 ftp://sunsite.unc.edu/pub/Linux/kernel/modules-2.0.0.tar.gz
105
106 - The ISDN4Linux tools available from
107 ftp://ftp.franken.de/pub/isdn4linux/v2.0/isdn4k-utils-2.0.tar.gz
108 This package may fail to compile for you so you can alternatively
109 get a pre-compiled version from
110 ftp://ftp.spellcast.com/pub/drivers/isdn4linux/isdn4k-bin-2.0.tar.gz
111
112
1132. Basic Operations
114-------------------
115
1162.1 Unpacking and installing the driver
117
118 1. As root, create a directory in a convenient place. We suggest
119 /usr/src/spellcaster.
120
121 2. Unpack the archive with :
122 tar xzf sc-n.nn.tar.gz -C /usr/src/spellcaster
123
124 3. Change directory to /usr/src/spellcaster
125
126 4. Read the README and RELNOTES files.
127
128 5. Run 'make' and if all goes well, run 'make install'.
129
1302.2 Read the man pages!!!
131
132Make sure you read the scctrl(8) and sc(4) manual pages before continuing
133any further. Type 'man 8 scctrl' and 'man 4 sc'.
134
1352.3 Installing the driver
136
137To install the driver, type '/sbin/insmod sc' as root. sc(4) details options
138you can specify but you shouldn't need to use any unless this doesn't work.
139
140Make sure the driver loaded and detected all of the adapters by typing
141'dmesg'.
142
143The driver can be configured so that it is loaded upon startup. To do this,
144edit the file "/etc/modules/'uname -f'/'uname -v'" and insert the driver name
145"sc" into this file.
146
1472.4 Removing the driver
148
149To remove the driver, delete any interfaces that may exist (see isdnctrl(8)
150for more on this) and then type '/sbin/rmmod sc'.
151
1522.5 What to do if it doesn't load
153
154If, when you try to install the driver, you get a message mentioning
155'register_isdn' then you do not have the ISDN4Linux system installed. Please
156make sure that ISDN support is configured in the kernel.
157
158If you get a message that says 'initialization of sc failed', then the
159driver failed to detect an adapter or failed to find resources needed such
160as a free IRQ line or shared memory segment. If you are sure there are free
161resources available, use the insmod options detailed in sc(4) to override
162the probing function.
163
164Upon testing, the following problem was noted, the driver would load without
165problems, but the board would not respond beyond that point. When a check was
166done with 'cat /proc/interrupts' the interrupt count for sc was 0. In the event
167of this problem, change the BIOS settings so that the interrupts in question are
168reserved for ISA use only.
169
170
1712.6 How to setup ISDN4Linux with the driver
172
173There are three main configurations which you can use with the driver:
174
175A) Basic HDLC connection
176B) PPP connection
177C) MLPPP connection
178
179It should be mentioned here that you may also use a tty connection if you
180desire. The Documentation directory of the isdn4linux subsystem offers good
181documentation on this feature.
182
183A) 10 steps to the establishment of a basic HDLC connection
184-----------------------------------------------------------
185
186- please open the isdn-hdlc file in the examples directory and follow along...
187
188 This file is a script used to configure a BRI ISDN TA to establish a
189 basic HDLC connection between its two channels. Two network
190 interfaces are created and two routes added between the channels.
191
192 i) using the isdnctrl utility, add an interface with "addif" and
193 name it "isdn0"
194 ii) add the outgoing and inbound telephone numbers
195 iii) set the Layer 2 protocol to hdlc
196 iv) set the eaz of the interface to be the phone number of that
197 specific channel
198 v) to turn the callback features off, set the callback to "off" and
199 the callback delay (cbdelay) to 0.
200 vi) the hangup timeout can be set to a specified number of seconds
201 vii) the hangup upon incoming call can be set on or off
202 viii) use the ifconfig command to bring up the network interface with
203 a specific IP address and point to point address
204 ix) add a route to the IP address through the isdn0 interface
205 x) a ping should result in the establishment of the connection
206
207
208B) Establishment of a PPP connection
209------------------------------------
210
211- please open the isdn-ppp file in the examples directory and follow along...
212
213 This file is a script used to configure a BRI ISDN TA to establish a
214 PPP connection between the two channels. The file is almost
215 identical to the HDLC connection example except that the packet
216 encapsulation type has to be set.
217
218 use the same procedure as in the HDLC connection from steps i) to
219 iii) then, after the Layer 2 protocol is set, set the encapsulation
220 "encap" to syncppp. With this done, the rest of the steps, iv) to x)
221 can be followed from above.
222
223 Then, the ipppd (ippp daemon) must be setup:
224
225 xi) use the ipppd function found in /sbin/ipppd to set the following:
226 xii) take out (minus) VJ compression and bsd compression
227 xiii) set the mru size to 2000
228 xiv) link the two /dev interfaces to the daemon
229
230NOTE: A "*" in the inbound telephone number specifies that a call can be
231accepted on any number.
232
233C) Establishment of a MLPPP connection
234--------------------------------------
235
236- please open the isdn-mppp file in the examples directory and follow along...
237
238 This file is a script used to configure a BRI ISDN TA to accept a
239 Multi Link PPP connection.
240
241 i) using the isdnctrl utility, add an interface with "addif" and
242 name it "ippp0"
243 ii) add the inbound telephone number
244 iii) set the Layer 2 protocol to hdlc and the Layer 3 protocol to
245 trans (transparent)
246 iv) set the packet encapsulation to syncppp
247 v) set the eaz of the interface to be the phone number of that
248 specific channel
249 vi) to turn the callback features off, set the callback to "off" and
250 the callback delay (cbdelay) to 0.
251 vi) the hangup timeout can be set to a specified number of seconds
252 vii) the hangup upon incoming call can be set on or off
253 viii) add a slave interface and name it "ippp32" for example
254 ix) set the similar parameters for the ippp32 interface
255 x) use the ifconfig command to bring-up the ippp0 interface with a
256 specific IP address and point to point address
257 xi) add a route to the IP address through the ippp0 interface
258 xii) use the ipppd function found in /sbin/ipppd to set the following:
259 xiii) take out (minus) bsd compression
260 xiv) set the mru size to 2000
261 xv) add (+) the multi-link function "+mp"
262 xvi) link the two /dev interfaces to the daemon
263
264NOTE: To use the MLPPP connection to dial OUT to a MLPPP connection, change
265the inbound telephone numbers to the outgoing telephone numbers of the MLPPP
266host.
267
268
2693. Beta Change Summaries and Miscellaneous Notes
270------------------------------------------------
271When using the "scctrl" utility to upload firmware revisions on the board,
272please note that the byte count displayed at the end of the operation may be
273different from the total number of bytes in the "dcbfwn.nn.sr" file. Please
274disregard the displayed byte count.
275
276It was noted that in Beta Release 1, the module would fail to load and result
277in a segmentation fault when 'insmod'ed. This problem was created when one of
278the isdn4linux parameters, (isdn_ctrl, data field) was filled in. In some
279cases, this data field was NULL, and was left unchecked, so when it was
280referenced... segv. The bug has been fixed around line 63-68 of event.c.
281