aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/abituguru-datasheet
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/abituguru-datasheet')
-rw-r--r--Documentation/hwmon/abituguru-datasheet6
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet
index aef5a9b36846..4d184f2db0ea 100644
--- a/Documentation/hwmon/abituguru-datasheet
+++ b/Documentation/hwmon/abituguru-datasheet
@@ -74,7 +74,7 @@ a sensor.
74Notice that some banks have both a read and a write address this is how the 74Notice that some banks have both a read and a write address this is how the
75uGuru determines if a read from or a write to the bank is taking place, thus 75uGuru determines if a read from or a write to the bank is taking place, thus
76when reading you should always use the read address and when writing the 76when reading you should always use the read address and when writing the
77write address. The write address is always one (1) more then the read address. 77write address. The write address is always one (1) more than the read address.
78 78
79 79
80uGuru ready 80uGuru ready
@@ -224,7 +224,7 @@ Bit 3: Beep if alarm (RW)
224Bit 4: 1 if alarm cause measured temp is over the warning threshold (R) 224Bit 4: 1 if alarm cause measured temp is over the warning threshold (R)
225Bit 5: 1 if alarm cause measured volt is over the max threshold (R) 225Bit 5: 1 if alarm cause measured volt is over the max threshold (R)
226Bit 6: 1 if alarm cause measured volt is under the min threshold (R) 226Bit 6: 1 if alarm cause measured volt is under the min threshold (R)
227Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds (RW) 227Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW)
228 Temp sensor: Shutdown if temp is over the shutdown threshold (RW) 228 Temp sensor: Shutdown if temp is over the shutdown threshold (RW)
229 229
230* This bit is only honored/used by the uGuru if a temp sensor is connected 230* This bit is only honored/used by the uGuru if a temp sensor is connected
@@ -293,7 +293,7 @@ Byte 0:
293Alarm behaviour for the selected sensor. A 1 enables the described behaviour. 293Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
294Bit 0: Give an alarm if measured rpm is under the min threshold (RW) 294Bit 0: Give an alarm if measured rpm is under the min threshold (RW)
295Bit 3: Beep if alarm (RW) 295Bit 3: Beep if alarm (RW)
296Bit 7: Shutdown if alarm persist for more then 4 seconds (RW) 296Bit 7: Shutdown if alarm persist for more than 4 seconds (RW)
297 297
298Byte 1: 298Byte 1:
299min threshold (scale as bank 0x26) 299min threshold (scale as bank 0x26)