5 files changed, 117 insertions, 9 deletions

diff --git a/Documentation/fb/gxfb.txt b/Documentation/fb/gxfb.txt
new file mode 100644
index 000000000000..2f640903bbb2
--- /dev/null
+++ b/Documentation/fb/gxfb.txt
@@ -0,0 +1,52 @@
+[This file is cloned from VesaFB/aty128fb]
+
+What is gxfb?
+=================
+
+This is a graphics framebuffer driver for AMD Geode GX2 based processors.
+
+Advantages:
+
+ * No need to use AMD's VSA code (or other VESA emulation layer) in the
+   BIOS.
+ * It provides a nice large console (128 cols + 48 lines with 1024x768)
+   without using tiny, unreadable fonts.
+ * You can run XF68_FBDev on top of /dev/fb0
+ * Most important: boot logo :-)
+
+Disadvantages:
+
+ * graphic mode is slower than text mode...
+
+
+How to use it?
+==============
+
+Switching modes is done using  gxfb.mode_option=<resolution>... boot
+parameter or using `fbset' program.
+
+See Documentation/fb/modedb.txt for more information on modedb
+resolutions.
+
+
+X11
+===
+
+XF68_FBDev should generally work fine, but it is non-accelerated.
+
+
+Configuration
+=============
+
+You can pass kernel command line options to gxfb with gxfb.<option>.
+For example, gxfb.mode_option=800x600@75.
+Accepted options:
+
+mode_option     - specify the video mode.  Of the form
+                  <x>x<y>[-<bpp>][@<refresh>]
+vram            - size of video ram (normally auto-detected)
+vt_switch       - enable vt switching during suspend/resume.  The vt
+                  switch is slow, but harmless.
+
+--
+Andres Salomon <dilinger@debian.org>
diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.txt
index da5ee74219e8..27a3160650a4 100644
--- a/Documentation/fb/intelfb.txt
+++ b/Documentation/fb/intelfb.txt
@@ -14,6 +14,8 @@ graphics devices.  These would include:
         Intel 915GM
         Intel 945G
         Intel 945GM
+        Intel 965G
+        Intel 965GM
 
 B.  List of available options
 
diff --git a/Documentation/fb/lxfb.txt b/Documentation/fb/lxfb.txt
new file mode 100644
index 000000000000..38b3ca6f6ca7
--- /dev/null
+++ b/Documentation/fb/lxfb.txt
@@ -0,0 +1,52 @@
+[This file is cloned from VesaFB/aty128fb]
+
+What is lxfb?
+=================
+
+This is a graphics framebuffer driver for AMD Geode LX based processors.
+
+Advantages:
+
+ * No need to use AMD's VSA code (or other VESA emulation layer) in the
+   BIOS.
+ * It provides a nice large console (128 cols + 48 lines with 1024x768)
+   without using tiny, unreadable fonts.
+ * You can run XF68_FBDev on top of /dev/fb0
+ * Most important: boot logo :-)
+
+Disadvantages:
+
+ * graphic mode is slower than text mode...
+
+
+How to use it?
+==============
+
+Switching modes is done using  lxfb.mode_option=<resolution>... boot
+parameter or using `fbset' program.
+
+See Documentation/fb/modedb.txt for more information on modedb
+resolutions.
+
+
+X11
+===
+
+XF68_FBDev should generally work fine, but it is non-accelerated.
+
+
+Configuration
+=============
+
+You can pass kernel command line options to lxfb with lxfb.<option>.
+For example, lxfb.mode_option=800x600@75.
+Accepted options:
+
+mode_option     - specify the video mode.  Of the form
+                  <x>x<y>[-<bpp>][@<refresh>]
+vram            - size of video ram (normally auto-detected)
+vt_switch       - enable vt switching during suspend/resume.  The vt
+                  switch is slow, but harmless.
+
+--
+Andres Salomon <dilinger@debian.org>
diff --git a/Documentation/fb/metronomefb.txt b/Documentation/fb/metronomefb.txt
index b9a2e7b7e838..237ca412582d 100644
--- a/Documentation/fb/metronomefb.txt
+++ b/Documentation/fb/metronomefb.txt
@@ -1,7 +1,7 @@
                         Metronomefb
                         -----------
 Maintained by Jaya Kumar <jayakumar.lkml.gmail.com>
-Last revised: Nov 20, 2007
+Last revised: Mar 10, 2008
 
 Metronomefb is a driver for the Metronome display controller. The controller
 is from E-Ink Corporation. It is intended to be used to drive the E-Ink
@@ -11,20 +11,18 @@ display media here http://www.e-ink.com/products/matrix/metronome.html .
 Metronome is interfaced to the host CPU through the AMLCD interface. The
 host CPU generates the control information and the image in a framebuffer
 which is then delivered to the AMLCD interface by a host specific method.
-Currently, that's implemented for the PXA's LCDC controller. The display and
-error status are each pulled through individual GPIOs.
+The display and error status are each pulled through individual GPIOs.
 
-Metronomefb was written for the PXA255/gumstix/lyre combination and
-therefore currently has board set specific code in it. If other boards based on
-other architectures are available, then the host specific code can be separated
-and abstracted out.
+Metronomefb is platform independent and depends on a board specific driver
+to do all physical IO work. Currently, an example is implemented for the
+PXA board used in the AM-200 EPD devkit. This example is am200epd.c
 
 Metronomefb requires waveform information which is delivered via the AMLCD
 interface to the metronome controller. The waveform information is expected to
 be delivered from userspace via the firmware class interface. The waveform file
 can be compressed as long as your udev or hotplug script is aware of the need
-to uncompress it before delivering it. metronomefb will ask for waveform.wbf
-which would typically go into /lib/firmware/waveform.wbf depending on your
+to uncompress it before delivering it. metronomefb will ask for metronome.wbf
+which would typically go into /lib/firmware/metronome.wbf depending on your
 udev/hotplug setup. I have only tested with a single waveform file which was
 originally labeled 23P01201_60_WT0107_MTC. I do not know what it stands for.
 Caution should be exercised when manipulating the waveform as there may be
diff --git a/Documentation/fb/modedb.txt b/Documentation/fb/modedb.txt
index 4fcdb4cf4cca..ec4dee75a354 100644
--- a/Documentation/fb/modedb.txt
+++ b/Documentation/fb/modedb.txt
@@ -125,8 +125,12 @@ There may be more modes.
     amifb       - Amiga chipset frame buffer
     aty128fb    - ATI Rage128 / Pro frame buffer
     atyfb       - ATI Mach64 frame buffer
+    pm2fb       - Permedia 2/2V frame buffer
+    pm3fb       - Permedia 3 frame buffer
+    sstfb       - Voodoo 1/2 (SST1) chipset frame buffer
     tdfxfb      - 3D Fx frame buffer
     tridentfb   - Trident (Cyber)blade chipset frame buffer
+    vt8623fb    - VIA 8623 frame buffer
 
 BTW, only a few drivers use this at the moment. Others are to follow
 (feel free to send patches).