aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/fb/matroxfb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/fb/matroxfb.txt')
-rw-r--r--Documentation/fb/matroxfb.txt415
1 files changed, 415 insertions, 0 deletions
diff --git a/Documentation/fb/matroxfb.txt b/Documentation/fb/matroxfb.txt
new file mode 100644
index 000000000000..ad7a67707d62
--- /dev/null
+++ b/Documentation/fb/matroxfb.txt
@@ -0,0 +1,415 @@
1[This file is cloned from VesaFB. Thanks go to Gerd Knorr]
2
3What is matroxfb?
4=================
5
6This is a driver for a graphic framebuffer for Matrox devices on
7Alpha, Intel and PPC boxes.
8
9Advantages:
10
11 * It provides a nice large console (128 cols + 48 lines with 1024x768)
12 without using tiny, unreadable fonts.
13 * You can run XF{68,86}_FBDev or XFree86 fbdev driver on top of /dev/fb0
14 * Most important: boot logo :-)
15
16Disadvantages:
17
18 * graphic mode is slower than text mode... but you should not notice
19 if you use same resolution as you used in textmode.
20
21
22How to use it?
23==============
24
25Switching modes is done using the video=matroxfb:vesa:... boot parameter
26or using `fbset' program.
27
28If you want, for example, enable a resolution of 1280x1024x24bpp you should
29pass to the kernel this command line: "video=matroxfb:vesa:0x1BB".
30
31You should compile in both vgacon (to boot if you remove you Matrox from
32box) and matroxfb (for graphics mode). You should not compile-in vesafb
33unless you have primary display on non-Matrox VBE2.0 device (see
34Documentation/fb/vesafb.txt for details).
35
36Currently supported video modes are (through vesa:... interface, PowerMac
37has [as addon] compatibility code):
38
39
40[Graphic modes]
41
42bpp | 640x400 640x480 768x576 800x600 960x720
43----+--------------------------------------------
44 4 | 0x12 0x102
45 8 | 0x100 0x101 0x180 0x103 0x188
46 15 | 0x110 0x181 0x113 0x189
47 16 | 0x111 0x182 0x114 0x18A
48 24 | 0x1B2 0x184 0x1B5 0x18C
49 32 | 0x112 0x183 0x115 0x18B
50
51
52[Graphic modes (continued)]
53
54bpp | 1024x768 1152x864 1280x1024 1408x1056 1600x1200
55----+------------------------------------------------
56 4 | 0x104 0x106
57 8 | 0x105 0x190 0x107 0x198 0x11C
58 15 | 0x116 0x191 0x119 0x199 0x11D
59 16 | 0x117 0x192 0x11A 0x19A 0x11E
60 24 | 0x1B8 0x194 0x1BB 0x19C 0x1BF
61 32 | 0x118 0x193 0x11B 0x19B
62
63
64[Text modes]
65
66text | 640x400 640x480 1056x344 1056x400 1056x480
67-----+------------------------------------------------
68 8x8 | 0x1C0 0x108 0x10A 0x10B 0x10C
698x16 | 2, 3, 7 0x109
70
71You can enter these number either hexadecimal (leading `0x') or decimal
72(0x100 = 256). You can also use value + 512 to achieve compatibility
73with your old number passed to vesafb.
74
75Non-listed number can be achieved by more complicated command-line, for
76example 1600x1200x32bpp can be specified by `video=matroxfb:vesa:0x11C,depth:32'.
77
78
79X11
80===
81
82XF{68,86}_FBDev should work just fine, but it is non-accelerated. On non-intel
83architectures there are some glitches for 24bpp videomodes. 8, 16 and 32bpp
84works fine.
85
86Running another (accelerated) X-Server like XF86_SVGA works too. But (at least)
87XFree servers have big troubles in multihead configurations (even on first
88head, not even talking about second). Running XFree86 4.x accelerated mga
89driver is possible, but you must not enable DRI - if you do, resolution and
90color depth of your X desktop must match resolution and color depths of your
91virtual consoles, otherwise X will corrupt accelerator settings.
92
93
94SVGALib
95=======
96
97Driver contains SVGALib compatibility code. It is turned on by choosing textual
98mode for console. You can do it at boot time by using videomode
992,3,7,0x108-0x10C or 0x1C0. At runtime, `fbset -depth 0' does this work.
100Unfortunately, after SVGALib application exits, screen contents is corrupted.
101Switching to another console and back fixes it. I hope that it is SVGALib's
102problem and not mine, but I'm not sure.
103
104
105Configuration
106=============
107
108You can pass kernel command line options to matroxfb with
109`video=matroxfb:option1,option2:value2,option3' (multiple options should be
110separated by comma, values are separated from options by `:').
111Accepted options:
112
113mem:X - size of memory (X can be in megabytes, kilobytes or bytes)
114 You can only decrease value determined by driver because of
115 it always probe for memory. Default is to use whole detected
116 memory usable for on-screen display (i.e. max. 8 MB).
117disabled - do not load driver; you can use also `off', but `disabled'
118 is here too.
119enabled - load driver, if you have `video=matroxfb:disabled' in LILO
120 configuration, you can override it by this (you cannot override
121 `off'). It is default.
122noaccel - do not use acceleration engine. It does not work on Alphas.
123accel - use acceleration engine. It is default.
124nopan - create initial consoles with vyres = yres, thus disabling virtual
125 scrolling.
126pan - create initial consoles as tall as possible (vyres = memory/vxres).
127 It is default.
128nopciretry - disable PCI retries. It is needed for some broken chipsets,
129 it is autodetected for intel's 82437. In this case device does
130 not comply to PCI 2.1 specs (it will not guarantee that every
131 transaction terminate with success or retry in 32 PCLK).
132pciretry - enable PCI retries. It is default, except for intel's 82437.
133novga - disables VGA I/O ports. It is default if BIOS did not enable device.
134 You should not use this option, some boards then do not restart
135 without power off.
136vga - preserve state of VGA I/O ports. It is default. Driver does not
137 enable VGA I/O if BIOS did not it (it is not safe to enable it in
138 most cases).
139nobios - disables BIOS ROM. It is default if BIOS did not enable BIOS itself.
140 You should not use this option, some boards then do not restart
141 without power off.
142bios - preserve state of BIOS ROM. It is default. Driver does not enable
143 BIOS if BIOS was not enabled before.
144noinit - tells driver, that devices were already initialized. You should use
145 it if you have G100 and/or if driver cannot detect memory, you see
146 strange pattern on screen and so on. Devices not enabled by BIOS
147 are still initialized. It is default.
148init - driver initializes every device it knows about.
149memtype - specifies memory type, implies 'init'. This is valid only for G200
150 and G400 and has following meaning:
151 G200: 0 -> 2x128Kx32 chips, 2MB onboard, probably sgram
152 1 -> 2x128Kx32 chips, 4MB onboard, probably sgram
153 2 -> 2x256Kx32 chips, 4MB onboard, probably sgram
154 3 -> 2x256Kx32 chips, 8MB onboard, probably sgram
155 4 -> 2x512Kx16 chips, 8/16MB onboard, probably sdram only
156 5 -> same as above
157 6 -> 4x128Kx32 chips, 4MB onboard, probably sgram
158 7 -> 4x128Kx32 chips, 8MB onboard, probably sgram
159 G400: 0 -> 2x512Kx16 SDRAM, 16/32MB
160 2x512Kx32 SGRAM, 16/32MB
161 1 -> 2x256Kx32 SGRAM, 8/16MB
162 2 -> 4x128Kx32 SGRAM, 8/16MB
163 3 -> 4x512Kx32 SDRAM, 32MB
164 4 -> 4x256Kx32 SGRAM, 16/32MB
165 5 -> 2x1Mx32 SDRAM, 32MB
166 6 -> reserved
167 7 -> reserved
168 You should use sdram or sgram parameter in addition to memtype
169 parameter.
170nomtrr - disables write combining on frame buffer. This slows down driver but
171 there is reported minor incompatibility between GUS DMA and XFree
172 under high loads if write combining is enabled (sound dropouts).
173mtrr - enables write combining on frame buffer. It speeds up video accesses
174 much. It is default. You must have MTRR support enabled in kernel
175 and your CPU must have MTRR (f.e. Pentium II have them).
176sgram - tells to driver that you have Gxx0 with SGRAM memory. It has no
177 effect without `init'.
178sdram - tells to driver that you have Gxx0 with SDRAM memory.
179 It is a default.
180inv24 - change timings parameters for 24bpp modes on Millenium and
181 Millenium II. Specify this if you see strange color shadows around
182 characters.
183noinv24 - use standard timings. It is the default.
184inverse - invert colors on screen (for LCD displays)
185noinverse - show true colors on screen. It is default.
186dev:X - bind driver to device X. Driver numbers device from 0 up to N,
187 where device 0 is first `known' device found, 1 second and so on.
188 lspci lists devices in this order.
189 Default is `every' known device for driver with multihead support
190 and first working device (usually dev:0) for driver without
191 multihead support.
192nohwcursor - disables hardware cursor (use software cursor instead).
193hwcursor - enables hardware cursor. It is default. If you are using
194 non-accelerated mode (`noaccel' or `fbset -accel false'), software
195 cursor is used (except for text mode).
196noblink - disables cursor blinking. Cursor in text mode always blinks (hw
197 limitation).
198blink - enables cursor blinking. It is default.
199nofastfont - disables fastfont feature. It is default.
200fastfont:X - enables fastfont feature. X specifies size of memory reserved for
201 font data, it must be >= (fontwidth*fontheight*chars_in_font)/8.
202 It is faster on Gx00 series, but slower on older cards.
203grayscale - enable grayscale summing. It works in PSEUDOCOLOR modes (text,
204 4bpp, 8bpp). In DIRECTCOLOR modes it is limited to characters
205 displayed through putc/putcs. Direct accesses to framebuffer
206 can paint colors.
207nograyscale - disable grayscale summing. It is default.
208cross4MB - enables that pixel line can cross 4MB boundary. It is default for
209 non-Millenium.
210nocross4MB - pixel line must not cross 4MB boundary. It is default for
211 Millenium I or II, because of these devices have hardware
212 limitations which do not allow this. But this option is
213 incompatible with some (if not all yet released) versions of
214 XF86_FBDev.
215dfp - enables digital flat panel interface. This option is incompatible with
216 secondary (TV) output - if DFP is active, TV output must be
217 inactive and vice versa. DFP always uses same timing as primary
218 (monitor) output.
219dfp:X - use settings X for digital flat panel interface. X is number from
220 0 to 0xFF, and meaning of each individual bit is described in
221 G400 manual, in description of DAC register 0x1F. For normal operation
222 you should set all bits to zero, except lowest bit. This lowest bit
223 selects who is source of display clocks, whether G400, or panel.
224 Default value is now read back from hardware - so you should specify
225 this value only if you are also using `init' parameter.
226outputs:XYZ - set mapping between CRTC and outputs. Each letter can have value
227 of 0 (for no CRTC), 1 (CRTC1) or 2 (CRTC2), and first letter corresponds
228 to primary analog output, second letter to the secondary analog output
229 and third letter to the DVI output. Default setting is 100 for
230 cards below G400 or G400 without DFP, 101 for G400 with DFP, and
231 111 for G450 and G550. You can set mapping only on first card,
232 use matroxset for setting up other devices.
233vesa:X - selects startup videomode. X is number from 0 to 0x1FF, see table
234 above for detailed explanation. Default is 640x480x8bpp if driver
235 has 8bpp support. Otherwise first available of 640x350x4bpp,
236 640x480x15bpp, 640x480x24bpp, 640x480x32bpp or 80x25 text
237 (80x25 text is always available).
238
239If you are not satisfied with videomode selected by `vesa' option, you
240can modify it with these options:
241
242xres:X - horizontal resolution, in pixels. Default is derived from `vesa'
243 option.
244yres:X - vertical resolution, in pixel lines. Default is derived from `vesa'
245 option.
246upper:X - top boundary: lines between end of VSYNC pulse and start of first
247 pixel line of picture. Default is derived from `vesa' option.
248lower:X - bottom boundary: lines between end of picture and start of VSYNC
249 pulse. Default is derived from `vesa' option.
250vslen:X - length of VSYNC pulse, in lines. Default is derived from `vesa'
251 option.
252left:X - left boundary: pixels between end of HSYNC pulse and first pixel.
253 Default is derived from `vesa' option.
254right:X - right boundary: pixels between end of picture and start of HSYNC
255 pulse. Default is derived from `vesa' option.
256hslen:X - length of HSYNC pulse, in pixels. Default is derived from `vesa'
257 option.
258pixclock:X - dotclocks, in ps (picoseconds). Default is derived from `vesa'
259 option and from `fh' and `fv' options.
260sync:X - sync. pulse - bit 0 inverts HSYNC polarity, bit 1 VSYNC polarity.
261 If bit 3 (value 0x08) is set, composite sync instead of HSYNC is
262 generated. If bit 5 (value 0x20) is set, sync on green is turned on.
263 Do not forget that if you want sync on green, you also probably
264 want composite sync.
265 Default depends on `vesa'.
266depth:X - Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
267 `vesa'.
268
269If you know capabilities of your monitor, you can specify some (or all) of
270`maxclk', `fh' and `fv'. In this case, `pixclock' is computed so that
271pixclock <= maxclk, real_fh <= fh and real_fv <= fv.
272
273maxclk:X - maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
274 `don't care'.
275fh:X - maximum horizontal synchronization frequency. X can be specified
276 in kHz or Hz. Default is `don't care'.
277fv:X - maximum vertical frequency. X must be specified in Hz. Default is
278 70 for modes derived from `vesa' with yres <= 400, 60Hz for
279 yres > 400.
280
281
282Limitations
283===========
284
285There are known and unknown bugs, features and misfeatures.
286Currently there are following known bugs:
287 + SVGALib does not restore screen on exit
288 + generic fbcon-cfbX procedures do not work on Alphas. Due to this,
289 `noaccel' (and cfb4 accel) driver does not work on Alpha. So everyone
290 with access to /dev/fb* on Alpha can hang machine (you should restrict
291 access to /dev/fb* - everyone with access to this device can destroy
292 your monitor, believe me...).
293 + 24bpp does not support correctly XF-FBDev on big-endian architectures.
294 + interlaced text mode is not supported; it looks like hardware limitation,
295 but I'm not sure.
296 + Gxx0 SGRAM/SDRAM is not autodetected.
297 + If you are using more than one framebuffer device, you must boot kernel
298 with 'video=scrollback:0'.
299 + maybe more...
300And following misfeatures:
301 + SVGALib does not restore screen on exit.
302 + pixclock for text modes is limited by hardware to
303 83 MHz on G200
304 66 MHz on Millennium I
305 60 MHz on Millennium II
306 Because I have no access to other devices, I do not know specific
307 frequencies for them. So driver does not check this and allows you to
308 set frequency higher that this. It causes sparks, black holes and other
309 pretty effects on screen. Device was not destroyed during tests. :-)
310 + my Millennium G200 oscillator has frequency range from 35 MHz to 380 MHz
311 (and it works with 8bpp on about 320 MHz dotclocks (and changed mclk)).
312 But Matrox says on product sheet that VCO limit is 50-250 MHz, so I believe
313 them (maybe that chip overheats, but it has a very big cooler (G100 has
314 none), so it should work).
315 + special mixed video/graphics videomodes of Mystique and Gx00 - 2G8V16 and
316 G16V16 are not supported
317 + color keying is not supported
318 + feature connector of Mystique and Gx00 is set to VGA mode (it is disabled
319 by BIOS)
320 + DDC (monitor detection) is supported through dualhead driver
321 + some check for input values are not so strict how it should be (you can
322 specify vslen=4000 and so on).
323 + maybe more...
324And following features:
325 + 4bpp is available only on Millennium I and Millennium II. It is hardware
326 limitation.
327 + selection between 1:5:5:5 and 5:6:5 16bpp videomode is done by -rgba
328 option of fbset: "fbset -depth 16 -rgba 5,5,5" selects 1:5:5:5, anything
329 else selects 5:6:5 mode.
330 + text mode uses 6 bit VGA palette instead of 8 bit (one of 262144 colors
331 instead of one of 16M colors). It is due to hardware limitation of
332 Millennium I/II and SVGALib compatibility.
333
334
335Benchmarks
336==========
337It is time to redraw whole screen 1000 times in 1024x768, 60Hz. It is
338time for draw 6144000 characters on screen through /dev/vcsa
339(for 32bpp it is about 3GB of data (exactly 3000 MB); for 8x16 font in
34016 seconds, i.e. 187 MBps).
341Times were obtained from one older version of driver, now they are about 3%
342faster, it is kernel-space only time on P-II/350 MHz, Millennium I in 33 MHz
343PCI slot, G200 in AGP 2x slot. I did not test vgacon.
344
345NOACCEL
346 8x16 12x22
347 Millennium I G200 Millennium I G200
3488bpp 16.42 9.54 12.33 9.13
34916bpp 21.00 15.70 19.11 15.02
35024bpp 36.66 36.66 35.00 35.00
35132bpp 35.00 30.00 33.85 28.66
352
353ACCEL, nofastfont
354 8x16 12x22 6x11
355 Millennium I G200 Millennium I G200 Millennium I G200
3568bpp 7.79 7.24 13.55 7.78 30.00 21.01
35716bpp 9.13 7.78 16.16 7.78 30.00 21.01
35824bpp 14.17 10.72 18.69 10.24 34.99 21.01
35932bpp 16.15 16.16 18.73 13.09 34.99 21.01
360
361ACCEL, fastfont
362 8x16 12x22 6x11
363 Millennium I G200 Millennium I G200 Millennium I G200
3648bpp 8.41 6.01 6.54 4.37 16.00 10.51
36516bpp 9.54 9.12 8.76 6.17 17.52 14.01
36624bpp 15.00 12.36 11.67 10.00 22.01 18.32
36732bpp 16.18 18.29* 12.71 12.74 24.44 21.00
368
369TEXT
370 8x16
371 Millennium I G200
372TEXT 3.29 1.50
373
374* Yes, it is slower than Millennium I.
375
376
377Dualhead G400
378=============
379Driver supports dualhead G400 with some limitations:
380 + secondary head shares videomemory with primary head. It is not problem
381 if you have 32MB of videoram, but if you have only 16MB, you may have
382 to think twice before choosing videomode (for example twice 1880x1440x32bpp
383 is not possible).
384 + due to hardware limitation, secondary head can use only 16 and 32bpp
385 videomodes.
386 + secondary head is not accelerated. There were bad problems with accelerated
387 XFree when secondary head used to use acceleration.
388 + secondary head always powerups in 640x480@60-32 videomode. You have to use
389 fbset to change this mode.
390 + secondary head always powerups in monitor mode. You have to use fbmatroxset
391 to change it to TV mode. Also, you must select at least 525 lines for
392 NTSC output and 625 lines for PAL output.
393 + kernel is not fully multihead ready. So some things are impossible to do.
394 + if you compiled it as module, you must insert i2c-matroxfb, matroxfb_maven
395 and matroxfb_crtc2 into kernel.
396
397
398Dualhead G450
399=============
400Driver supports dualhead G450 with some limitations:
401 + secondary head shares videomemory with primary head. It is not problem
402 if you have 32MB of videoram, but if you have only 16MB, you may have
403 to think twice before choosing videomode.
404 + due to hardware limitation, secondary head can use only 16 and 32bpp
405 videomodes.
406 + secondary head is not accelerated.
407 + secondary head always powerups in 640x480@60-32 videomode. You have to use
408 fbset to change this mode.
409 + TV output is not supported
410 + kernel is not fully multihead ready, so some things are impossible to do.
411 + if you compiled it as module, you must insert matroxfb_g450 and matroxfb_crtc2
412 into kernel.
413
414--
415Petr Vandrovec <vandrove@vc.cvut.cz>