4 files changed, 96 insertions, 111 deletions

diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
index 068070ff13cd..8bab8461a4af 100644
--- a/Documentation/dvb/avermedia.txt
+++ b/Documentation/dvb/avermedia.txt
@@ -1,4 +1,3 @@
-
 HOWTO: Get An Avermedia DVB-T working under Linux
            ______________________________________________
 
@@ -137,11 +136,8 @@ Getting the card going
    To  power  up  the  card,  load  the  following modules in the
    following order:
 
-     * insmod dvb-core.o
-     * modprobe bttv.o
-     * insmod bt878.o
-     * insmod dvb-bt8xx.o
-     * insmod sp887x.o
+     * modprobe bttv (normally loaded automatically)
+     * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
 
    Insertion  of  these  modules  into  the  running  kernel will
    activate the appropriate DVB device nodes. It is then possible
@@ -302,4 +298,4 @@ Further Update
    Many  thanks to Nigel Pearson for the updates to this document
    since the recent revision of the driver.
 
-   January 29th 2004
+   February 14th 2006
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index 52ed462061df..4e7614e606c5 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -1,118 +1,78 @@
-How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working
-==========================================================================
+How to get the bt8xx cards working
+==================================
 
-This class of cards has a bt878a as the PCI interface, and
-require the bttv driver.
+1) General information
+======================
 
-Please pay close attention to the warning about the bttv module
-options below for the DST card.
+This class of cards has a bt878a as the PCI interface, and require the bttv driver
+for accessing the i2c bus and the gpio pins of the bt8xx chipset.
+Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
 
-1) General informations
-=======================
-
-These drivers require the bttv driver to provide the means to access
-the i2c bus and the gpio pins of the bt8xx chipset.
-
-Because of this, you need to enable
-"Device drivers" => "Multimedia devices"
-  => "Video For Linux" => "BT848 Video For Linux"
-
-Furthermore you need to enable
-"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
-  => "DVB for Linux" "DVB Core Support" "BT8xx based PCI cards"
+Compiling kernel please enable:
+a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux"
+b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
 
 2) Loading Modules
 ==================
 
-In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us, plus the common dvb-bt8xx device driver.
-The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst),
-FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded
-automatically by the dvb-bt8xx device driver.
-
-3a) Nebula / Pinnacle PCTV / FusionHDTV Lite
----------------------------------------------
-
-   $ modprobe bttv (normally bttv is being loaded automatically by kmod)
-   $ modprobe dvb-bt8xx
-
-(or just place dvb-bt8xx in /etc/modules for automatic loading)
-
-
-3b) TwinHan and Clones
---------------------------
+In default cases bttv is loaded automatically.
+To load the backend either place dvb-bt8xx in etc/modules, or apply manually:
 
-   $ modprobe bttv card=0x71
-   $ modprobe dvb-bt8xx
-   $ modprobe dst
+        $ modprobe dvb-bt8xx
 
-The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which  is necessary for TwinHan cards. Omission of this parameter might result
-in a system lockup.
+All frontends will be loaded automatically.
+People running udev please see Documentation/dvb/udev.txt.
 
-If you're having an older card (blue color PCB) and card=0x71 locks up
-your machine, try using 0x68, too. If that does not work, ask on the
-mailing list.
+In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
 
-The DST module takes a couple of useful parameters.
+2a) Running TwinHan and Clones
+------------------------------
 
-verbose takes values 0 to 4. These values control the verbosity level,
-and can be used to debug also.
+        $ modprobe bttv card=113
+        $ modprobe dvb-bt8xx
+        $ modprobe dst
 
-verbose=0 means complete disabling of messages
-        1 only error messages are displayed
-        2 notifications are also displayed
-        3 informational messages are also displayed
-        4 debug setting
+Useful parameters for verbosity level and debugging the dst module:
 
-dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
-0x20 means it has a Conditional Access slot.
+verbose=0:              messages are disabled
+        1:              only error messages are displayed
+        2:              notifications are displayed
+        3:              other useful messages are displayed
+        4:              debug setting
+dst_addons=0:           card is a free to air (FTA) card only
+           0x20:        card has a conditional access slot for scrambled channels
 
-The autodetected values are determined by the cards 'response string'
-which you can see in your logs e.g.
+The autodetected values are determined by the cards' "response string".
+In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
+For bug reports please send in a complete log with verbose=4 activated.
+Please also see Documentation/dvb/ci.txt.
 
-dst_get_device_id: Recognise [DSTMCI]
-
-If you need to sent in bug reports on the dst, please do send in a complete
-log with the verbose=4 module parameter. For general usage, the default setting
-of verbose=1 is ideal.
-
-
-4) Multiple cards
+2b) Running multiple cards
 --------------------------
 
-If you happen to be running multiple cards, it would be advisable to load
-the bttv module with the card id. This would help to solve any module loading
-problems that you might face.
-
-For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite
+Examples of card ID's:
 
-        $ modprobe bttv card=0x71 card=0x87
-
-Here the order of the card id is important and should be the same as that of the
-physical order of the cards. Here card=0x71 represents the Twinhan and clones
-and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be
-specified in decimal, rather than hex:
+Pinnacle PCTV Sat:               94
+Nebula Electronics Digi TV:     104
+pcHDTV HD-2000 TV:              112
+Twinhan DST and clones:         113
+Avermedia AverTV DVB-T 771:     123
+Avermedia AverTV DVB-T 761:     124
+DViCO FusionHDTV DVB-T Lite:    128
+DViCO FusionHDTV 5 Lite:        135
 
+Notice: The order of the card ID should be uprising:
+Example:
         $ modprobe bttv card=113 card=135
+        $ modprobe dvb-bt8xx
 
-Some examples of card-id's
-
-Pinnacle Sat            0x5e  (94)
-Nebula Digi TV          0x68  (104)
-PC HDTV                 0x70  (112)
-Twinhan                 0x71  (113)
-FusionHDTV DVB-T Lite   0x80  (128)
-FusionHDTV5 Lite        0x87  (135)
-
-For a full list of card-id's, see the V4L Documentation within the kernel
-source:  linux/Documentation/video4linux/CARDLIST.bttv
-
-If you have problems with this please do ask on the mailing list.
+For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
+In case of further problems send questions to the mailing list: www.linuxdvb.org.
 
---
 Authors: Richard Walker,
          Jamie Honan,
          Michael Hunold,
          Manu Abraham,
+         Uwe Bugla,
          Michael Krufky
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 75c28a174092..15fc8fbef67e 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -21,8 +21,9 @@
 use File::Temp qw/ tempdir /;
 use IO::Handle;
 
-@components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
-                "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
+@components = ( "sp8870", "sp887x", "tda10045", "tda10046",
+                "tda10046lifeview", "av7110", "dec2000t", "dec2540t",
+                "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
                 "or51211", "or51132_qam", "or51132_vsb", "bluebird");
 
 # Check args
@@ -126,6 +127,24 @@ sub tda10046 {
     $outfile;
 }
 
+sub tda10046lifeview {
+    my $sourcefile = "Drv_2.11.02.zip";
+    my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+    my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
+    my $outfile = "dvb-fe-tda10046.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+
+    wgetfile($sourcefile, $url);
+    unzip($sourcefile, $tmpdir);
+    extract("$tmpdir/LVHybrid.sys", 0x8b088, 24602, "$tmpdir/fwtmp");
+    verify("$tmpdir/fwtmp", $hash);
+    copy("$tmpdir/fwtmp", $outfile);
+
+    $outfile;
+}
+
 sub av7110 {
     my $sourcefile = "dvb-ttpci-01.fw-261d";
     my $url = "http://www.linuxtv.org/downloads/firmware/$sourcefile";
@@ -227,7 +246,7 @@ sub vp7041 {
 }
 
 sub dibusb {
-        my $url = "http://www.linuxtv.org/downloads/firmware/dvb-dibusb-5.0.0.11.fw";
+        my $url = "http://www.linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
         my $outfile = "dvb-dibusb-5.0.0.11.fw";
         my $hash = "fa490295a527360ca16dcdf3224ca243";
 
diff --git a/Documentation/dvb/readme.txt b/Documentation/dvb/readme.txt
index f5c50b22de3b..0b0380c91990 100644
--- a/Documentation/dvb/readme.txt
+++ b/Documentation/dvb/readme.txt
@@ -20,11 +20,23 @@ http://linuxtv.org/downloads/
 
 What's inside this directory:
 
+"avermedia.txt"
+contains detailed information about the
+Avermedia DVB-T cards. See also "bt8xx.txt".
+
+"bt8xx.txt"
+contains detailed information about the
+various bt8xx based "budget" DVB cards.
+
 "cards.txt"
 contains a list of supported hardware.
 
+"ci.txt"
+contains detailed information about the
+CI module as part from TwinHan cards and Clones.
+
 "contributors.txt"
-is the who-is-who of DVB development
+is the who-is-who of DVB development.
 
 "faq.txt"
 contains frequently asked questions and their answers.
@@ -34,19 +46,17 @@ script to download and extract firmware for those devices
 that require it.
 
 "ttusb-dec.txt"
-contains detailed informations about the
+contains detailed information about the
 TT DEC2000/DEC3000 USB DVB hardware.
 
-"bt8xx.txt"
-contains detailed installation instructions for the
-various bt8xx based "budget" DVB cards
-(Nebula, Pinnacle PCTV, Twinhan DST)
-
-"README.dibusb"
-contains detailed information about adapters
-based on DiBcom reference design.
-
 "udev.txt"
 how to get DVB and udev up and running.
 
+"README.dvb-usb"
+contains detailed information about the DVB USB cards.
+
+"README.flexcop"
+contains detailed information about the
+Technisat- and Flexcop B2C2 drivers.
+
 Good luck and have fun!