aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/dvb/avermedia.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/dvb/avermedia.txt')
-rw-r--r--Documentation/dvb/avermedia.txt304
1 files changed, 304 insertions, 0 deletions
diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
new file mode 100644
index 000000000000..09020ebd202b
--- /dev/null
+++ b/Documentation/dvb/avermedia.txt
@@ -0,0 +1,304 @@
1
2HOWTO: Get An Avermedia DVB-T working under Linux
3 ______________________________________________
4
5 Table of Contents
6 Assumptions and Introduction
7 The Avermedia DVB-T
8 Getting the card going
9 Receiving DVB-T in Australia
10 Known Limitations
11 Further Update
12
13Assumptions and Introduction
14
15 It is assumed that the reader understands the basic structure
16 of the Linux Kernel DVB drivers and the general principles of
17 Digital TV.
18
19 One significant difference between Digital TV and Analogue TV
20 that the unwary (like myself) should consider is that,
21 although the component structure of budget DVB-T cards are
22 substantially similar to Analogue TV cards, they function in
23 substantially different ways.
24
25 The purpose of an Analogue TV is to receive and display an
26 Analogue Television signal. An Analogue TV signal (otherwise
27 known as composite video) is an analogue encoding of a
28 sequence of image frames (25 per second) rasterised using an
29 interlacing technique. Interlacing takes two fields to
30 represent one frame. Computers today are at their best when
31 dealing with digital signals, not analogue signals and a
32 composite video signal is about as far removed from a digital
33 data stream as you can get. Therefore, an Analogue TV card for
34 a PC has the following purpose:
35
36 * Tune the receiver to receive a broadcast signal
37 * demodulate the broadcast signal
38 * demultiplex the analogue video signal and analogue audio
39 signal (note some countries employ a digital audio signal
40 embedded within the modulated composite analogue signal -
41 NICAM.)
42 * digitize the analogue video signal and make the resulting
43 datastream available to the data bus.
44
45 The digital datastream from an Analogue TV card is generated
46 by circuitry on the card and is often presented uncompressed.
47 For a PAL TV signal encoded at a resolution of 768x576 24-bit
48 color pixels over 25 frames per second - a fair amount of data
49 is generated and must be proceesed by the PC before it can be
50 displayed on the video monitor screen. Some Analogue TV cards
51 for PC's have onboard MPEG2 encoders which permit the raw
52 digital data stream to be presented to the PC in an encoded
53 and compressed form - similar to the form that is used in
54 Digital TV.
55
56 The purpose of a simple budget digital TV card (DVB-T,C or S)
57 is to simply:
58
59 * Tune the received to receive a broadcast signal.
60 * Extract the encoded digital datastream from the broadcast
61 signal.
62 * Make the encoded digital datastream (MPEG2) available to
63 the data bus.
64
65 The significant difference between the two is that the tuner
66 on the analogue TV card spits out an Analogue signal, whereas
67 the tuner on the digital TV card spits out a compressed
68 encoded digital datastream. As the signal is already
69 digitised, it is trivial to pass this datastream to the PC
70 databus with minimal additional processing and then extract
71 the digital video and audio datastreams passing them to the
72 appropriate software or hardware for decoding and viewing.
73 _________________________________________________________
74
75The Avermedia DVB-T
76
77 The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs:
78
79 * RF Tuner Input
80 * Composite Video Input (RCA Jack)
81 * SVIDEO Input (Mini-DIN)
82
83 The RF Tuner Input is the input to the tuner module of the
84 card. The Tuner is otherwise known as the "Frontend" . The
85 Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely
86 post to the linux-dvb mailing list ascertained that the
87 Microtune 7202D is supported by the sp887x driver which is
88 found in the dvb-hw CVS module.
89
90 The DVB-T card is based around the BT878 chip which is a very
91 common multimedia bridge and often found on Analogue TV cards.
92 There is no on-board MPEG2 decoder, which means that all MPEG2
93 decoding must be done in software, or if you have one, on an
94 MPEG2 hardware decoding card or chipset.
95 _________________________________________________________
96
97Getting the card going
98
99 In order to fire up the card, it is necessary to load a number
100 of modules from the DVB driver set. Prior to this it will have
101 been necessary to download these drivers from the linuxtv CVS
102 server and compile them successfully.
103
104 Depending on the card's feature set, the Device Driver API for
105 DVB under Linux will expose some of the following device files
106 in the /dev tree:
107
108 * /dev/dvb/adapter0/audio0
109 * /dev/dvb/adapter0/ca0
110 * /dev/dvb/adapter0/demux0
111 * /dev/dvb/adapter0/dvr0
112 * /dev/dvb/adapter0/frontend0
113 * /dev/dvb/adapter0/net0
114 * /dev/dvb/adapter0/osd0
115 * /dev/dvb/adapter0/video0
116
117 The primary device nodes that we are interested in (at this
118 stage) for the Avermedia DVB-T are:
119
120 * /dev/dvb/adapter0/dvr0
121 * /dev/dvb/adapter0/frontend0
122
123 The dvr0 device node is used to read the MPEG2 Data Stream and
124 the frontend0 node is used to tune the frontend tuner module.
125
126 At this stage, it has not been able to ascertain the
127 functionality of the remaining device nodes in respect of the
128 Avermedia DVBT. However, full functionality in respect of
129 tuning, receiving and supplying the MPEG2 data stream is
130 possible with the currently available versions of the driver.
131 It may be possible that additional functionality is available
132 from the card (i.e. viewing the additional analogue inputs
133 that the card presents), but this has not been tested yet. If
134 I get around to this, I'll update the document with whatever I
135 find.
136
137 To power up the card, load the following modules in the
138 following order:
139
140 * insmod dvb-core.o
141 * modprobe bttv.o
142 * insmod bt878.o
143 * insmod dvb-bt8xx.o
144 * insmod sp887x.o
145
146 Insertion of these modules into the running kernel will
147 activate the appropriate DVB device nodes. It is then possible
148 to start accessing the card with utilities such as scan, tzap,
149 dvbstream etc.
150
151 The frontend module sp887x.o, requires an external firmware.
152 Please use the command "get_dvb_firmware sp887x" to download
153 it. Then copy it to /usr/lib/hotplug/firmware.
154
155Receiving DVB-T in Australia
156
157 I have no experience of DVB-T in other countries other than
158 Australia, so I will attempt to explain how it works here in
159 Melbourne and how this affects the configuration of the DVB-T
160 card.
161
162 The Digital Broadcasting Australia website has a Reception
163 locatortool which provides information on transponder channels
164 and frequencies. My local transmitter happens to be Mount
165 Dandenong.
166
167 The frequencies broadcast by Mount Dandenong are:
168
169 Table 1. Transponder Frequencies Mount Dandenong, Vic, Aus.
170 Broadcaster Channel Frequency
171 ABC VHF 12 226.5 MHz
172 TEN VHF 11 219.5 MHz
173 NINE VHF 8 191.625 MHz
174 SEVEN VHF 6 177.5 MHz
175 SBS UHF 29 536.5 MHz
176
177 The Scan utility has a set of compiled-in defaults for various
178 countries and regions, but if they do not suit, or if you have
179 a pre-compiled scan binary, you can specify a data file on the
180 command line which contains the transponder frequencies. Here
181 is a sample file for the above channel transponders:
182# Data file for DVB scan program
183#
184# C Frequency SymbolRate FEC QAM
185# S Frequency Polarisation SymbolRate FEC
186# T Frequency Bandwidth FEC FEC2 QAM Mode Guard Hier
187T 226500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
188T 191625000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
189T 219500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
190T 177500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
191T 536500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
192
193 The defaults for the transponder frequency and other
194 modulation parameters were obtained from www.dba.org.au.
195
196 When Scan runs, it will output channels.conf information for
197 any channel's transponders which the card's frontend can lock
198 onto. (i.e. any whose signal is strong enough at your
199 antenna).
200
201 Here's my channels.conf file for anyone who's interested:
202ABC HDTV:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
203:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2307:0:560
204ABC TV Melbourne:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_
2054:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:65
2060:561
207ABC TV 2:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
208:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:562
209ABC TV 3:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
210:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:563
211ABC TV 4:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
212:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:564
213ABC DiG Radio:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:Q
214AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:2311:56
2156
216TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
217_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:158
2185
219TEN Digital 1:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
220AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
221586
222TEN Digital 2:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
223AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
224587
225TEN Digital 3:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
226AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
227588
228TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
229_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:158
2309
231TEN Digital 4:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
232AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
233590
234TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
235_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:159
2361
237TEN HD:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:T
238RANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:0:1592
239TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
240_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:159
2413
242Nine Digital:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QA
243M_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:513:660:10
24472
245Nine Digital HD:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2
246:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:0:1
247073
248Nine Guide:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_
24964:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:670:1074
2507 Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_6
2514:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1328
2527 Digital 1:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
253_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1329
2547 Digital 2:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
255_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1330
2567 Digital 3:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
257_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1331
2587 HD Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QA
259M_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:833:834:133
2602
2617 Program Guide:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3
262:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:865:866:
2631334
264SBS HD:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:T
265RANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:102:103:784
266SBS DIGITAL 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:Q
267AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:785
268SBS DIGITAL 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:Q
269AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:162:83:786
270SBS EPG:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:
271TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:163:85:787
272SBS RADIO 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
273_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:201:798
274SBS RADIO 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
275_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:202:799
276 _________________________________________________________
277
278Known Limitations
279
280 At present I can say with confidence that the frontend tunes
281 via /dev/dvb/adapter{x}/frontend0 and supplies an MPEG2 stream
282 via /dev/dvb/adapter{x}/dvr0. I have not tested the
283 functionality of any other part of the card yet. I will do so
284 over time and update this document.
285
286 There are some limitations in the i2c layer due to a returned
287 error message inconsistency. Although this generates errors in
288 dmesg and the system logs, it does not appear to affect the
289 ability of the frontend to function correctly.
290 _________________________________________________________
291
292Further Update
293
294 dvbstream and VideoLAN Client on windows works a treat with
295 DVB, in fact this is currently serving as my main way of
296 viewing DVB-T at the moment. Additionally, VLC is happily
297 decoding HDTV signals, although the PC is dropping the odd
298 frame here and there - I assume due to processing capability -
299 as all the decoding is being done under windows in software.
300
301 Many thanks to Nigel Pearson for the updates to this document
302 since the recent revision of the driver.
303
304 January 29th 2004
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 06:59:55 -0500