1 files changed, 0 insertions, 205 deletions
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
deleted file mode 100644
index 5515469de7cf..000000000000
--- a/Documentation/dvb/README.flexcop
+++ /dev/null
@@ -1,205 +0,0 @@
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-History & News
-==============
-  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-General coding processing
-=========================
-We should proceed as follows (as long as no one complains):
-0) Think before start writing code!
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-Current situation
-=================
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-What seems to be ready?
-----------------------
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-What to do in the near future?
--------------------------------------
-(no special order here)
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-Testing changes
---------------
-O             = item is working
-P             = item is partially working
-X             = item is not working
-N             = item does not apply here
-<empty field> = item need to be examined
-       | PCI                               | USB
-item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
-------+-------+---------+---------+-------+-------+---------+---------+-------
-1a)    | O     |         |         |       | N     | N       | N       | N
-1b)    | O     |         |         |       |       |         | O       |
-1c)    | N     | N       |         |       | N     | N       | O       |
-1d)    |                 O                 |                 O
-1e)    |                 O                 |                 O
-1f)    |                                   P
-1g)    |                                   O
-1h)    |                 P                 |
-1i)    |                 O                 |                 N
-1j)    |                 O                 |                 N
-1l)    |                 O                 |                 N
-2)     |                 O                 |                 N
-5a)    |                 N                 |                 O
-5b)*   |                 N                 |
-5c)    |                 N                 |                 O
-* - not done yet
-Known bugs and problems and TODO
--------------------------------
-1g/h/l) when pid filtering is enabled on the pci card
-DMA usage currently:
-  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
-  address and triggers an IRQ when it's full and starts writing to the second
-  address. When the second address is full, the IRQ is triggered again, and
-  the flexcop writes to first address again, and so on.
-  The buffersize of each address is currently 640*188 bytes.
-  Problem is, when using hw-pid-filtering and doing some low-bandwidth
-  operation (like scanning) the buffers won't be filled enough to trigger
-  the IRQ. That's why:
-  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
-  is triggered.  Is the current write address of DMA1 different to the one
-  during the last IRQ, then the data is passed to the demuxer.
-  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
-  implemented correctly yet.
-  The solution is to disable HW PID filtering, but I don't know how the DVB
-  API software demux behaves on slow systems with 45MBit/s TS.
-Solved bugs :)
--------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-Improvements when rewriting (refactoring) is done
-=================================================
- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
-  (enable sleeping for other demods than dvb-s)
- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-Debugging
---------
- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
-  with this flexcop, this is important, because i2c is now using the
-  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
-  that, please tell us so).
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-                  PCI                  USB
-------------------------------------------------------------------------------
-Different:
-Register access:  accessing IO memory  USB control message
-I2C bus:          I2C bus of the FC    USB control message
-Data transfer:    DMA                  isochronous transfer
-EEPROM transfer:  through i2c bus      not clear yet
-Identical:
-Streaming:                 accessing registers
-PID Filtering:             accessing registers
-Sram destinations:         accessing registers
-Tuner/Demod:                     I2C bus
-DVB-stuff:            can be written for common use
-Acknowledgements (just for the rewriting part)
-================
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-Vadim Catana for correcting the USB transfer.
-comments, critics and ideas to linux-dvb@linuxtv.org.

diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop deleted file mode 100644 index 5515469de7cf..000000000000 --- a/Documentation/dvb/README.flexcop +++ /dev/null
@@ -1,205 +0,0 @@
1	This README escorted the skystar2-driver rewriting procedure. It describes the
2	state of the new flexcop-driver set and some internals are written down here
3	too.
4
5	This document hopefully describes things about the flexcop and its
6	device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
7	drivers based on the skystar2.c and other information.
8
9	Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
10	touched and rewritten.
11
12	History & News
13	==============
14	2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
15
16
17
18
19	General coding processing
20	=========================
21
22	We should proceed as follows (as long as no one complains):
23
24	0) Think before start writing code!
25
26	1) rewriting the skystar2.c with the help of the flexcop register descriptions
27	and splitting up the files to a pci-bus-part and a flexcop-part.
28	The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
29	device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
30
31	2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
32	and other pci drivers)
33
34	3) make some beautification (see 'Improvements when rewriting (refactoring) is
35	done')
36
37	4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
38	a wider tester audience.
39
40	5) creating an usb-bus-part using the already written flexcop code for the pci
41	card.
42
43	Idea: create a kernel-object for the flexcop and export all important
44	functions. This option saves kernel-memory, but maybe a lot of functions have
45	to be exported to kernel namespace.
46
47
48	Current situation
49	=================
50
51	0) Done :)
52	1) Done (some minor issues left)
53	2) Done
54	3) Not ready yet, more information is necessary
55	4) next to be done (see the table below)
56	5) USB driver is working (yes, there are some minor issues)
57
58	What seems to be ready?
59	-----------------------
60
61	1) Rewriting
62	1a) i2c is cut off from the flexcop-pci.c and seems to work
63	1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
64	1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
65	1e) eeprom (reading MAC address)
66	1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
67	1f) misc. register accesses for reading parameters (e.g. resetting, revision)
68	1g) pid/mac filter (flexcop-hw-filter.c)
69	1i) dvb-stuff initialization in flexcop.c (done)
70	1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
71	1j) remove flexcop initialization from flexcop-pci.c completely (done)
72	1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
73	1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
74	non-static where possible, moved code to proper places)
75
76	2) Search for errors in the leftover of flexcop-pci.c (partially done)
77	5a) add MAC address reading
78	5c) feeding of ISOC data to the software demux (format of the isochronous data
79	and speed optimization, no real error) (thanks to Vadim Catana)
80
81	What to do in the near future?
82	--------------------------------------
83	(no special order here)
84
85	5) USB driver
86	5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
87
88	Testing changes
89	---------------
90
91	O = item is working
92	P = item is partially working
93	X = item is not working
94	N = item does not apply here
95	<empty field> = item need to be examined
96
97	\| PCI \| USB
98	item \| mt352 \| nxt2002 \| stv0299 \| mt312 \| mt352 \| nxt2002 \| stv0299 \| mt312
99	-------+-------+---------+---------+-------+-------+---------+---------+-------
100	1a) \| O \| \| \| \| N \| N \| N \| N
101	1b) \| O \| \| \| \| \| \| O \|
102	1c) \| N \| N \| \| \| N \| N \| O \|
103	1d) \| O \| O
104	1e) \| O \| O
105	1f) \| P
106	1g) \| O
107	1h) \| P \|
108	1i) \| O \| N
109	1j) \| O \| N
110	1l) \| O \| N
111	2) \| O \| N
112	5a) \| N \| O
113	5b)* \| N \|
114	5c) \| N \| O
115
116	* - not done yet
117
118	Known bugs and problems and TODO
119	--------------------------------
120
121	1g/h/l) when pid filtering is enabled on the pci card
122
123	DMA usage currently:
124	The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
125	address and triggers an IRQ when it's full and starts writing to the second
126	address. When the second address is full, the IRQ is triggered again, and
127	the flexcop writes to first address again, and so on.
128	The buffersize of each address is currently 640*188 bytes.
129
130	Problem is, when using hw-pid-filtering and doing some low-bandwidth
131	operation (like scanning) the buffers won't be filled enough to trigger
132	the IRQ. That's why:
133
134	When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
135	is triggered. Is the current write address of DMA1 different to the one
136	during the last IRQ, then the data is passed to the demuxer.
137
138	There is an additional DMA-IRQ-method: packet count IRQ. This isn't
139	implemented correctly yet.
140
141	The solution is to disable HW PID filtering, but I don't know how the DVB
142	API software demux behaves on slow systems with 45MBit/s TS.
143
144	Solved bugs :)
145	--------------
146	1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
147	working)
148	SOLUTION: also index 0 was affected, because net_translation is done for
149	these indexes by default
150
151	5b) isochronous transfer does only work in the first attempt (for the Sky2PC
152	USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
153	woke up again (don't know if this need fixes, see
154	flexcop-fe-tuner.c:flexcop_sleep)
155
156	NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
157	anything in the while the driver is loaded the first time), no transfers take
158	place anymore.
159
160	Improvements when rewriting (refactoring) is done
161	=================================================
162
163	- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
164	(enable sleeping for other demods than dvb-s)
165	- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
166
167	Debugging
168	---------
169	- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
170	with this flexcop, this is important, because i2c is now using the
171	flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
172	that, please tell us so).
173
174	Everything which is identical in the following table, can be put into a common
175	flexcop-module.
176
177	PCI USB
178	-------------------------------------------------------------------------------
179	Different:
180	Register access: accessing IO memory USB control message
181	I2C bus: I2C bus of the FC USB control message
182	Data transfer: DMA isochronous transfer
183	EEPROM transfer: through i2c bus not clear yet
184
185	Identical:
186	Streaming: accessing registers
187	PID Filtering: accessing registers
188	Sram destinations: accessing registers
189	Tuner/Demod: I2C bus
190	DVB-stuff: can be written for common use
191
192	Acknowledgements (just for the rewriting part)
193	================
194
195	Bjarne Steinsbo thought a lot in the first place of the pci part for this code
196	sharing idea.
197
198	Andreas Oberritter for providing a recent PCI initialization template
199	(pluto2.c).
200
201	Boleslaw Ciesielski for pointing out a problem with firmware loader.
202
203	Vadim Catana for correcting the USB transfer.
204
205	comments, critics and ideas to linux-dvb@linuxtv.org.