15 files changed, 27 insertions, 17 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
index ce6a1a072028..8a3c40829899 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
@@ -30,10 +30,6 @@ should only be used when a device has multiple interrupt parents.
   Example:
         interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
 
-A device node may contain either "interrupts" or "interrupts-extended", but not
-both. If both properties are present, then the operating system should log an
-error and use only the data in "interrupts".
-
 2) Interrupt controller nodes
 -----------------------------
 
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 41aeed38926d..f8fbe9af7b2f 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -7,3 +7,14 @@ And for the interrupt mapping part:
 
 Open Firmware Recommended Practice: Interrupt Mapping
 http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+   If present this property assigns a fixed PCI domain number to a host bridge,
+   otherwise an unstable (across boots) unique number will be assigned.
+   It is required to either not set this property at all or set it for all
+   host bridges in the system, otherwise potentially conflicting domain numbers
+   may be assigned to root buses behind different host bridges.  The domain
+   number for each host bridge in the system must be unique.
diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
index a186181c402b..51b943cc9770 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090-PDC's pin configuration nodes act as a container for an abitrary number
+TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
 of subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
index 4b27c99f7f9d..49d0e6050940 100644
--- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090's pin configuration nodes act as a container for an abitrary number of
+TZ1090's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt
index daa768956069..ac4da9fe07bd 100644
--- a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
index b5469db1d7ad..e89b4677567d 100644
--- a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
index 61e73cde9ae9..3c8ce28baad6 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Tegra's pin configuration nodes act as a container for an abitrary number of
+Tegra's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
index c596a6ad3285..5f55be59d914 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
@@ -13,7 +13,7 @@ Optional properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
 Each of these subnodes represents some desired configuration for a group of pins.
 
 Required subnode-properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
index b4480d5c3aca..458615596946 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
@@ -32,7 +32,7 @@ Required properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
+SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
 of these subnodes represents muxing for a pin, a group, or a list of pins or
 groups.
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index 2fb90b37aa09..a7bde64798c7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
index ffafa1990a30..c4ea61ac56f2 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
index e33e4dcdce79..6e88e91feb11 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
index 93b7de91b9f6..eb8d8aa41f20 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
@@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
index d2ea80dc43eb..e4d6a9d20f7d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 723999d73744..a344ec2713a5 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -34,6 +34,7 @@ chipidea	Chipidea, Inc
 chrp    Common Hardware Reference Platform
 chunghwa        Chunghwa Picture Tubes Ltd.
 cirrus  Cirrus Logic, Inc.
+cnm     Chips&Media, Inc.
 cortina Cortina Systems, Inc.
 crystalfontz    Crystalfontz America, Inc.
 dallas  Maxim Integrated Products (formerly Dallas Semiconductor)
@@ -92,6 +93,7 @@ maxim	Maxim Integrated Products
 mediatek        MediaTek Inc.
 micrel  Micrel Inc.
 microchip       Microchip Technology Inc.
+micron  Micron Technology Inc.
 mitsubishi      Mitsubishi Electric Corporation
 mosaixtech      Mosaix Technologies, Inc.
 moxa    Moxa
@@ -127,6 +129,7 @@ renesas	Renesas Electronics Corporation
 ricoh   Ricoh Co. Ltd.
 rockchip        Fuzhou Rockchip Electronics Co., Ltd
 samsung Samsung Semiconductor
+sandisk Sandisk Corporation
 sbs     Smart Battery System
 schindler       Schindler
 seagate Seagate Technology PLC
@@ -138,7 +141,7 @@ silergy	Silergy Corp.
 sirf    SiRF Technology, Inc.
 sitronix        Sitronix Technology Corporation
 smsc    Standard Microsystems Corporation
-snps    Synopsys, Inc.
+snps    Synopsys, Inc.
 solidrun        SolidRun
 sony    Sony Corporation
 spansion        Spansion Inc.