1 files changed, 51 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
new file mode 100644
index 000000000000..6d0ac8d0ad9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -0,0 +1,51 @@
+Davinci SPI controller device bindings
+
+Required properties:
+- #address-cells: number of cells required to define a chip select
+        address on the SPI bus. Should be set to 1.
+- #size-cells: should be zero.
+- compatible:
+        - "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
+        - "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+- reg: Offset and length of SPI controller register space
+- num-cs: Number of chip selects
+- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
+        IP to the interrupt controller within the SoC. Possible values
+        are 0 and 1. Manual says one of the two possible interrupt
+        lines can be tied to the interrupt controller. Set this
+        based on a specifc SoC configuration.
+- interrupts: interrupt number mapped to CPU.
+- clocks: spi clk phandle
+
+Example of a NOR flash slave device (n25q032) connected to DaVinci
+SPI controller device over the SPI bus.
+
+spi0:spi@20BF0000 {
+        #address-cells                  = <1>;
+        #size-cells                     = <0>;
+        compatible                      = "ti,dm6446-spi";
+        reg                             = <0x20BF0000 0x1000>;
+        num-cs                          = <4>;
+        ti,davinci-spi-intr-line        = <0>;
+        interrupts                      = <338>;
+        clocks                          = <&clkspi>;
+
+        flash: n25q032@0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "st,m25p32";
+                spi-max-frequency = <25000000>;
+                reg = <0>;
+
+                partition@0 {
+                        label = "u-boot-spl";
+                        reg = <0x0 0x80000>;
+                        read-only;
+                };
+
+                partition@1 {
+                        label = "test";
+                        reg = <0x80000 0x380000>;
+                };
+        };
+};