1 files changed, 70 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
new file mode 100644
index 000000000000..8832e8798912
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -0,0 +1,70 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+        compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+        cell-index = <0>;
+        reg = <0x11000 0x100>;
+        interrupts = <40 0x8>;
+        interrupt-parent = < &ipic >;
+        fsl,rx-fifo-size = <16>;
+        fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+        compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+        cell-index = <1>;
+        reg = <0x11100 0x100>;
+        interrupts = <40 0x8>;
+        interrupt-parent = < &ipic >;
+        fsl,rx-fifo-size = <16>;
+        fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+        compatible = "fsl,mpc5121-psc-fifo";
+        reg = <0x11f00 0x100>;
+        interrupts = <40 0x8>;
+        interrupt-parent = < &ipic >;
+};