diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/nfc/trf7970a.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 1e436133685f..7c89ca290ced 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt | |||
@@ -13,6 +13,11 @@ Optional SoC Specific Properties: | |||
13 | - pinctrl-names: Contains only one value - "default". | 13 | - pinctrl-names: Contains only one value - "default". |
14 | - pintctrl-0: Specifies the pin control groups used for this controller. | 14 | - pintctrl-0: Specifies the pin control groups used for this controller. |
15 | - autosuspend-delay: Specify autosuspend delay in milliseconds. | 15 | - autosuspend-delay: Specify autosuspend delay in milliseconds. |
16 | - vin-voltage-override: Specify voltage of VIN pin in microvolts. | ||
17 | - irq-status-read-quirk: Specify that the trf7970a being used has the | ||
18 | "IRQ Status Read" erratum. | ||
19 | - en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF" | ||
20 | erratum. | ||
16 | 21 | ||
17 | Example (for ARM-based BeagleBone with TRF7970A on SPI1): | 22 | Example (for ARM-based BeagleBone with TRF7970A on SPI1): |
18 | 23 | ||
@@ -30,7 +35,10 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): | |||
30 | ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, | 35 | ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, |
31 | <&gpio2 5 GPIO_ACTIVE_LOW>; | 36 | <&gpio2 5 GPIO_ACTIVE_LOW>; |
32 | vin-supply = <&ldo3_reg>; | 37 | vin-supply = <&ldo3_reg>; |
38 | vin-voltage-override = <5000000>; | ||
33 | autosuspend-delay = <30000>; | 39 | autosuspend-delay = <30000>; |
40 | irq-status-read-quirk; | ||
41 | en2-rf-quirk; | ||
34 | status = "okay"; | 42 | status = "okay"; |
35 | }; | 43 | }; |
36 | }; | 44 | }; |