1 files changed, 0 insertions, 57 deletions

diff --git a/Documentation/cdrom/optcd b/Documentation/cdrom/optcd
deleted file mode 100644
index 6f46c7adb243..000000000000
--- a/Documentation/cdrom/optcd
+++ /dev/null
@@ -1,57 +0,0 @@
-This is the README file for the Optics Storage 8000 AT CDROM device driver.
-
-This is the driver for the so-called 'DOLPHIN' drive, with the 34-pin
-Sony-compatible interface. For the IDE-compatible Optics Storage 8001
-drive, you will want the ATAPI CDROM driver. The driver also seems to
-work with the Lasermate CR328A. If you have a drive that works with
-this driver, and that doesn't report itself as DOLPHIN, please drop me
-a mail.
-
-The support for multisession CDs is in ALPHA stage. If you use it,
-please mail me your experiences. Multisession support can be disabled
-at compile time.
-
-You can find some older versions of the driver at
-      dutette.et.tudelft.nl:/pub/linux/
-and at Eberhard's mirror
-      ftp.gwdg.de:/pub/linux/cdrom/drivers/optics/
-
-Before you can use the driver, you have to create the device file once:
- # mknod /dev/optcd0 b 17 0
-
-To specify the base address if the driver is "compiled-in" to your kernel,
-you can use the kernel command line item (LILO option)
-             optcd=0x340
-with the right address.
-
-If you have compiled optcd as a module, you can load it with
- # insmod /usr/src/linux/modules/optcd.o
-or
- # insmod /usr/src/linux/modules/optcd.o optcd=0x340
-with the matching address value of your interface card.
-
-The driver employs a number of buffers to do read-ahead and block size
-conversion. The number of buffers is configurable in optcd.h, and has
-influence on the driver performance. For my machine (a P75), 6 buffers
-seems optimal, as can be seen from this table:
-
-#bufs   kb/s    %cpu
-1       97      0.1
-2       191     0.3
-3       188     0.2
-4       246     0.3
-5       189     19
-6       280     0.4
-7       281     7.0
-8       246     2.8
-16      281     3.4
-
-If you get a throughput significantly below 300 kb/s, try tweaking
-N_BUFS, and don't forget to mail me your results!
-
-I'd appreciate success/failure reports. If you find a bug, try
-recompiling the driver with some strategically chosen debug options
-(these can be found in optcd.h) and include the messages generated in
-your bug report. Good luck.
-
-Leo Spiekman (spiekman@dutette.et.tudelft.nl)