1 files changed, 315 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
new file mode 100644
index 000000000000..79a4a75b2d2c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -0,0 +1,315 @@
+What:           /sys/class/regulator/.../state
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                state. This holds the regulator output state.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'unknown'
+
+                'enabled' means the regulator output is ON and is supplying
+                power to the system.
+
+                'disabled' means the regulator output is OFF and is not
+                supplying power to the system..
+
+                'unknown' means software cannot determine the state.
+
+                NOTE: this field can be used in conjunction with microvolts
+                and microamps to determine regulator output levels.
+
+
+What:           /sys/class/regulator/.../type
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                type. This holds the regulator type.
+
+                This will be one of the following strings:
+
+                'voltage'
+                'current'
+                'unknown'
+
+                'voltage' means the regulator output voltage can be controlled
+                by software.
+
+                'current' means the regulator output current limit can be
+                controlled by software.
+
+                'unknown' means software cannot control either voltage or
+                current limit.
+
+
+What:           /sys/class/regulator/.../microvolts
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                microvolts. This holds the regulator output voltage setting
+                measured in microvolts (i.e. E-6 Volts).
+
+                NOTE: This value should not be used to determine the regulator
+                output voltage level as this value is the same regardless of
+                whether the regulator is enabled or disabled.
+
+
+What:           /sys/class/regulator/.../microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                microamps. This holds the regulator output current limit
+                setting measured in microamps (i.e. E-6 Amps).
+
+                NOTE: This value should not be used to determine the regulator
+                output current level as this value is the same regardless of
+                whether the regulator is enabled or disabled.
+
+
+What:           /sys/class/regulator/.../opmode
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                opmode. This holds the regulator operating mode setting.
+
+                The opmode value can be one of the following strings:
+
+                'fast'
+                'normal'
+                'idle'
+                'standby'
+                'unknown'
+
+                The modes are described in include/linux/regulator/regulator.h
+
+                NOTE: This value should not be used to determine the regulator
+                output operating mode as this value is the same regardless of
+                whether the regulator is enabled or disabled.
+
+
+What:           /sys/class/regulator/.../min_microvolts
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                min_microvolts. This holds the minimum safe working regulator
+                output voltage setting for this domain measured in microvolts.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no min microvolts constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../max_microvolts
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                max_microvolts. This holds the maximum safe working regulator
+                output voltage setting for this domain measured in microvolts.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no max microvolts constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../min_microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                min_microamps. This holds the minimum safe working regulator
+                output current limit setting for this domain measured in
+                microamps.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no min microamps constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../max_microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                max_microamps. This holds the maximum safe working regulator
+                output current limit setting for this domain measured in
+                microamps.
+
+                NOTE: this will return the string 'constraint not defined' if
+                the power domain has no max microamps constraint defined by
+                platform code.
+
+
+What:           /sys/class/regulator/.../num_users
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                num_users. This holds the number of consumer devices that
+                have called regulator_enable() on this regulator.
+
+
+What:           /sys/class/regulator/.../requested_microamps
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                requested_microamps. This holds the total requested load
+                current in microamps for this regulator from all its consumer
+                devices.
+
+
+What:           /sys/class/regulator/.../parent
+Date:           April 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Some regulator directories will contain a link called parent.
+                This points to the parent or supply regulator if one exists.
+
+What:           /sys/class/regulator/.../suspend_mem_microvolts
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_mem_microvolts. This holds the regulator output
+                voltage setting for this domain measured in microvolts when
+                the system is suspended to memory.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to memory voltage defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_disk_microvolts
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_disk_microvolts. This holds the regulator output
+                voltage setting for this domain measured in microvolts when
+                the system is suspended to disk.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to disk voltage defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_standby_microvolts
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_standby_microvolts. This holds the regulator output
+                voltage setting for this domain measured in microvolts when
+                the system is suspended to standby.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to standby voltage defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_mem_mode
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_mem_mode. This holds the regulator operating mode
+                setting for this domain when the system is suspended to
+                memory.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to memory mode defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_disk_mode
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_disk_mode. This holds the regulator operating mode
+                setting for this domain when the system is suspended to disk.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to disk mode defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_standby_mode
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_standby_mode. This holds the regulator operating mode
+                setting for this domain when the system is suspended to
+                standby.
+
+                NOTE: this will return the string 'not defined' if
+                the power domain has no suspend to standby mode defined by
+                platform code.
+
+What:           /sys/class/regulator/.../suspend_mem_state
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_mem_state. This holds the regulator operating state
+                when suspended to memory.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'not defined'
+
+What:           /sys/class/regulator/.../suspend_disk_state
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_disk_state. This holds the regulator operating state
+                when suspended to disk.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'not defined'
+
+What:           /sys/class/regulator/.../suspend_standby_state
+Date:           May 2008
+KernelVersion:  2.6.26
+Contact:        Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+                Each regulator directory will contain a field called
+                suspend_standby_state. This holds the regulator operating
+                state when suspended to standby.
+
+                This will be one of the following strings:
+
+                'enabled'
+                'disabled'
+                'not defined'