aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/gianfar.c412
-rw-r--r--drivers/net/gianfar.h30
-rw-r--r--drivers/net/gianfar_ethtool.c100
-rw-r--r--drivers/net/gianfar_mii.c219
-rw-r--r--drivers/net/gianfar_mii.h45
-rw-r--r--drivers/net/gianfar_phy.c661
-rw-r--r--drivers/net/gianfar_phy.h213
9 files changed, 433 insertions, 1251 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ff3fccd7513b..4739a63601eb 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2075,6 +2075,8 @@ config SPIDER_NET
2075config GIANFAR 2075config GIANFAR
2076 tristate "Gianfar Ethernet" 2076 tristate "Gianfar Ethernet"
2077 depends on 85xx || 83xx 2077 depends on 85xx || 83xx
2078 select PHYLIB
2079 select PHYCONTROL
2078 help 2080 help
2079 This driver supports the Gigabit TSEC on the MPC85xx 2081 This driver supports the Gigabit TSEC on the MPC85xx
2080 family of chips, and the FEC on the 8540 2082 family of chips, and the FEC on the 8540
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e6acba68923a..39b17cb4f86e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/
13obj-$(CONFIG_BONDING) += bonding/ 13obj-$(CONFIG_BONDING) += bonding/
14obj-$(CONFIG_GIANFAR) += gianfar_driver.o 14obj-$(CONFIG_GIANFAR) += gianfar_driver.o
15 15
16gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_phy.o 16gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o
17 17
18# 18#
19# link order important here 19# link order important here
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 6518334b9280..ae5a2ed3b264 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -29,12 +29,7 @@
29 * define the configuration needed by the board are defined in a 29 * define the configuration needed by the board are defined in a
30 * board structure in arch/ppc/platforms (though I do not 30 * board structure in arch/ppc/platforms (though I do not
31 * discount the possibility that other architectures could one 31 * discount the possibility that other architectures could one
32 * day be supported. One assumption the driver currently makes 32 * day be supported.
33 * is that the PHY is configured in such a way to advertise all
34 * capabilities. This is a sensible default, and on certain
35 * PHYs, changing this default encounters substantial errata
36 * issues. Future versions may remove this requirement, but for
37 * now, it is best for the firmware to ensure this is the case.
38 * 33 *
39 * The Gianfar Ethernet Controller uses a ring of buffer 34 * The Gianfar Ethernet Controller uses a ring of buffer
40 * descriptors. The beginning is indicated by a register 35 * descriptors. The beginning is indicated by a register
@@ -47,7 +42,7 @@
47 * corresponding bit in the IMASK register is also set (if 42 * corresponding bit in the IMASK register is also set (if
48 * interrupt coalescing is active, then the interrupt may not 43 * interrupt coalescing is active, then the interrupt may not
49 * happen immediately, but will wait until either a set number 44 * happen immediately, but will wait until either a set number
50 * of frames or amount of time have passed.). In NAPI, the 45 * of frames or amount of time have passed). In NAPI, the
51 * interrupt handler will signal there is work to be done, and 46 * interrupt handler will signal there is work to be done, and
52 * exit. Without NAPI, the packet(s) will be handled 47 * exit. Without NAPI, the packet(s) will be handled
53 * immediately. Both methods will start at the last known empty 48 * immediately. Both methods will start at the last known empty
@@ -75,6 +70,7 @@
75#include <linux/sched.h> 70#include <linux/sched.h>
76#include <linux/string.h> 71#include <linux/string.h>
77#include <linux/errno.h> 72#include <linux/errno.h>
73#include <linux/unistd.h>
78#include <linux/slab.h> 74#include <linux/slab.h>
79#include <linux/interrupt.h> 75#include <linux/interrupt.h>
80#include <linux/init.h> 76#include <linux/init.h>
@@ -97,9 +93,11 @@
97#include <linux/version.h> 93#include <linux/version.h>
98#include <linux/dma-mapping.h> 94#include <linux/dma-mapping.h>
99#include <linux/crc32.h> 95#include <linux/crc32.h>
96#include <linux/mii.h>
97#include <linux/phy.h>
100 98
101#include "gianfar.h" 99#include "gianfar.h"
102#include "gianfar_phy.h" 100#include "gianfar_mii.h"
103 101
104#define TX_TIMEOUT (1*HZ) 102#define TX_TIMEOUT (1*HZ)
105#define SKB_ALLOC_TIMEOUT 1000000 103#define SKB_ALLOC_TIMEOUT 1000000
@@ -113,9 +111,8 @@
113#endif 111#endif
114 112
115const char gfar_driver_name[] = "Gianfar Ethernet"; 113const char gfar_driver_name[] = "Gianfar Ethernet";
116const char gfar_driver_version[] = "1.1"; 114const char gfar_driver_version[] = "1.2";
117 115
118int startup_gfar(struct net_device *dev);
119static int gfar_enet_open(struct net_device *dev); 116static int gfar_enet_open(struct net_device *dev);
120static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); 117static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
121static void gfar_timeout(struct net_device *dev); 118static void gfar_timeout(struct net_device *dev);
@@ -126,17 +123,13 @@ static int gfar_set_mac_address(struct net_device *dev);
126static int gfar_change_mtu(struct net_device *dev, int new_mtu); 123static int gfar_change_mtu(struct net_device *dev, int new_mtu);
127static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs); 124static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs);
128static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs); 125static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs);
129static irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
130static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs); 126static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs);
131static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs);
132static void gfar_phy_change(void *data);
133static void gfar_phy_timer(unsigned long data);
134static void adjust_link(struct net_device *dev); 127static void adjust_link(struct net_device *dev);
135static void init_registers(struct net_device *dev); 128static void init_registers(struct net_device *dev);
136static int init_phy(struct net_device *dev); 129static int init_phy(struct net_device *dev);
137static int gfar_probe(struct device *device); 130static int gfar_probe(struct device *device);
138static int gfar_remove(struct device *device); 131static int gfar_remove(struct device *device);
139void free_skb_resources(struct gfar_private *priv); 132static void free_skb_resources(struct gfar_private *priv);
140static void gfar_set_multi(struct net_device *dev); 133static void gfar_set_multi(struct net_device *dev);
141static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); 134static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
142#ifdef CONFIG_GFAR_NAPI 135#ifdef CONFIG_GFAR_NAPI
@@ -144,7 +137,6 @@ static int gfar_poll(struct net_device *dev, int *budget);
144#endif 137#endif
145int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); 138int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
146static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length); 139static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
147static void gfar_phy_startup_timer(unsigned long data);
148static void gfar_vlan_rx_register(struct net_device *netdev, 140static void gfar_vlan_rx_register(struct net_device *netdev,
149 struct vlan_group *grp); 141 struct vlan_group *grp);
150static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); 142static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
@@ -162,6 +154,9 @@ int gfar_uses_fcb(struct gfar_private *priv)
162 else 154 else
163 return 0; 155 return 0;
164} 156}
157
158/* Set up the ethernet device structure, private data,
159 * and anything else we need before we start */
165static int gfar_probe(struct device *device) 160static int gfar_probe(struct device *device)
166{ 161{
167 u32 tempval; 162 u32 tempval;
@@ -175,7 +170,7 @@ static int gfar_probe(struct device *device)
175 170
176 einfo = (struct gianfar_platform_data *) pdev->dev.platform_data; 171 einfo = (struct gianfar_platform_data *) pdev->dev.platform_data;
177 172
178 if (einfo == NULL) { 173 if (NULL == einfo) {
179 printk(KERN_ERR "gfar %d: Missing additional data!\n", 174 printk(KERN_ERR "gfar %d: Missing additional data!\n",
180 pdev->id); 175 pdev->id);
181 176
@@ -185,7 +180,7 @@ static int gfar_probe(struct device *device)
185 /* Create an ethernet device instance */ 180 /* Create an ethernet device instance */
186 dev = alloc_etherdev(sizeof (*priv)); 181 dev = alloc_etherdev(sizeof (*priv));
187 182
188 if (dev == NULL) 183 if (NULL == dev)
189 return -ENOMEM; 184 return -ENOMEM;
190 185
191 priv = netdev_priv(dev); 186 priv = netdev_priv(dev);
@@ -207,20 +202,11 @@ static int gfar_probe(struct device *device)
207 priv->regs = (struct gfar *) 202 priv->regs = (struct gfar *)
208 ioremap(r->start, sizeof (struct gfar)); 203 ioremap(r->start, sizeof (struct gfar));
209 204
210 if (priv->regs == NULL) { 205 if (NULL == priv->regs) {
211 err = -ENOMEM; 206 err = -ENOMEM;
212 goto regs_fail; 207 goto regs_fail;
213 } 208 }
214 209
215 /* Set the PHY base address */
216 priv->phyregs = (struct gfar *)
217 ioremap(einfo->phy_reg_addr, sizeof (struct gfar));
218
219 if (priv->phyregs == NULL) {
220 err = -ENOMEM;
221 goto phy_regs_fail;
222 }
223
224 spin_lock_init(&priv->lock); 210 spin_lock_init(&priv->lock);
225 211
226 dev_set_drvdata(device, dev); 212 dev_set_drvdata(device, dev);
@@ -386,12 +372,10 @@ static int gfar_probe(struct device *device)
386 return 0; 372 return 0;
387 373
388register_fail: 374register_fail:
389 iounmap((void *) priv->phyregs);
390phy_regs_fail:
391 iounmap((void *) priv->regs); 375 iounmap((void *) priv->regs);
392regs_fail: 376regs_fail:
393 free_netdev(dev); 377 free_netdev(dev);
394 return -ENOMEM; 378 return err;
395} 379}
396 380
397static int gfar_remove(struct device *device) 381static int gfar_remove(struct device *device)
@@ -402,108 +386,41 @@ static int gfar_remove(struct device *device)
402 dev_set_drvdata(device, NULL); 386 dev_set_drvdata(device, NULL);
403 387
404 iounmap((void *) priv->regs); 388 iounmap((void *) priv->regs);
405 iounmap((void *) priv->phyregs);
406 free_netdev(dev); 389 free_netdev(dev);
407 390
408 return 0; 391 return 0;
409} 392}
410 393
411 394
412/* Configure the PHY for dev. 395/* Initializes driver's PHY state, and attaches to the PHY.
413 * returns 0 if success. -1 if failure 396 * Returns 0 on success.
414 */ 397 */
415static int init_phy(struct net_device *dev) 398static int init_phy(struct net_device *dev)
416{ 399{
417 struct gfar_private *priv = netdev_priv(dev); 400 struct gfar_private *priv = netdev_priv(dev);
418 struct phy_info *curphy; 401 uint gigabit_support =
419 unsigned int timeout = PHY_INIT_TIMEOUT; 402 priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
420 struct gfar *phyregs = priv->phyregs; 403 SUPPORTED_1000baseT_Full : 0;
421 struct gfar_mii_info *mii_info; 404 struct phy_device *phydev;
422 int err;
423 405
424 priv->oldlink = 0; 406 priv->oldlink = 0;
425 priv->oldspeed = 0; 407 priv->oldspeed = 0;
426 priv->oldduplex = -1; 408 priv->oldduplex = -1;
427 409
428 mii_info = kmalloc(sizeof(struct gfar_mii_info), 410 phydev = phy_connect(dev, priv->einfo->bus_id, &adjust_link, 0);
429 GFP_KERNEL);
430
431 if(NULL == mii_info) {
432 if (netif_msg_ifup(priv))
433 printk(KERN_ERR "%s: Could not allocate mii_info\n",
434 dev->name);
435 return -ENOMEM;
436 }
437
438 mii_info->speed = SPEED_1000;
439 mii_info->duplex = DUPLEX_FULL;
440 mii_info->pause = 0;
441 mii_info->link = 1;
442
443 mii_info->advertising = (ADVERTISED_10baseT_Half |
444 ADVERTISED_10baseT_Full |
445 ADVERTISED_100baseT_Half |
446 ADVERTISED_100baseT_Full |
447 ADVERTISED_1000baseT_Full);
448 mii_info->autoneg = 1;
449 411
450 spin_lock_init(&mii_info->mdio_lock); 412 if (IS_ERR(phydev)) {
451 413 printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
452 mii_info->mii_id = priv->einfo->phyid; 414 return PTR_ERR(phydev);
453
454 mii_info->dev = dev;
455
456 mii_info->mdio_read = &read_phy_reg;
457 mii_info->mdio_write = &write_phy_reg;
458
459 priv->mii_info = mii_info;
460
461 /* Reset the management interface */
462 gfar_write(&phyregs->miimcfg, MIIMCFG_RESET);
463
464 /* Setup the MII Mgmt clock speed */
465 gfar_write(&phyregs->miimcfg, MIIMCFG_INIT_VALUE);
466
467 /* Wait until the bus is free */
468 while ((gfar_read(&phyregs->miimind) & MIIMIND_BUSY) &&
469 timeout--)
470 cpu_relax();
471
472 if(timeout <= 0) {
473 printk(KERN_ERR "%s: The MII Bus is stuck!\n",
474 dev->name);
475 err = -1;
476 goto bus_fail;
477 }
478
479 /* get info for this PHY */
480 curphy = get_phy_info(priv->mii_info);
481
482 if (curphy == NULL) {
483 if (netif_msg_ifup(priv))
484 printk(KERN_ERR "%s: No PHY found\n", dev->name);
485 err = -1;
486 goto no_phy;
487 } 415 }
488 416
489 mii_info->phyinfo = curphy; 417 /* Remove any features not supported by the controller */
418 phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
419 phydev->advertising = phydev->supported;
490 420
491 /* Run the commands which initialize the PHY */ 421 priv->phydev = phydev;
492 if(curphy->init) {
493 err = curphy->init(priv->mii_info);
494
495 if (err)
496 goto phy_init_fail;
497 }
498 422
499 return 0; 423 return 0;
500
501phy_init_fail:
502no_phy:
503bus_fail:
504 kfree(mii_info);
505
506 return err;
507} 424}
508 425
509static void init_registers(struct net_device *dev) 426static void init_registers(struct net_device *dev)
@@ -603,24 +520,13 @@ void stop_gfar(struct net_device *dev)
603 struct gfar *regs = priv->regs; 520 struct gfar *regs = priv->regs;
604 unsigned long flags; 521 unsigned long flags;
605 522
523 phy_stop(priv->phydev);
524
606 /* Lock it down */ 525 /* Lock it down */
607 spin_lock_irqsave(&priv->lock, flags); 526 spin_lock_irqsave(&priv->lock, flags);
608 527
609 /* Tell the kernel the link is down */
610 priv->mii_info->link = 0;
611 adjust_link(dev);
612
613 gfar_halt(dev); 528 gfar_halt(dev);
614 529
615 if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
616 /* Clear any pending interrupts */
617 mii_clear_phy_interrupt(priv->mii_info);
618
619 /* Disable PHY Interrupts */
620 mii_configure_phy_interrupt(priv->mii_info,
621 MII_INTERRUPT_DISABLED);
622 }
623
624 spin_unlock_irqrestore(&priv->lock, flags); 530 spin_unlock_irqrestore(&priv->lock, flags);
625 531
626 /* Free the IRQs */ 532 /* Free the IRQs */
@@ -629,13 +535,7 @@ void stop_gfar(struct net_device *dev)
629 free_irq(priv->interruptTransmit, dev); 535 free_irq(priv->interruptTransmit, dev);
630 free_irq(priv->interruptReceive, dev); 536 free_irq(priv->interruptReceive, dev);
631 } else { 537 } else {
632 free_irq(priv->interruptTransmit, dev); 538 free_irq(priv->interruptTransmit, dev);
633 }
634
635 if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
636 free_irq(priv->einfo->interruptPHY, dev);
637 } else {
638 del_timer_sync(&priv->phy_info_timer);
639 } 539 }
640 540
641 free_skb_resources(priv); 541 free_skb_resources(priv);
@@ -649,7 +549,7 @@ void stop_gfar(struct net_device *dev)
649 549
650/* If there are any tx skbs or rx skbs still around, free them. 550/* If there are any tx skbs or rx skbs still around, free them.
651 * Then free tx_skbuff and rx_skbuff */ 551 * Then free tx_skbuff and rx_skbuff */
652void free_skb_resources(struct gfar_private *priv) 552static void free_skb_resources(struct gfar_private *priv)
653{ 553{
654 struct rxbd8 *rxbdp; 554 struct rxbd8 *rxbdp;
655 struct txbd8 *txbdp; 555 struct txbd8 *txbdp;
@@ -770,7 +670,7 @@ int startup_gfar(struct net_device *dev)
770 (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * 670 (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
771 priv->tx_ring_size, GFP_KERNEL); 671 priv->tx_ring_size, GFP_KERNEL);
772 672
773 if (priv->tx_skbuff == NULL) { 673 if (NULL == priv->tx_skbuff) {
774 if (netif_msg_ifup(priv)) 674 if (netif_msg_ifup(priv))
775 printk(KERN_ERR "%s: Could not allocate tx_skbuff\n", 675 printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
776 dev->name); 676 dev->name);
@@ -785,7 +685,7 @@ int startup_gfar(struct net_device *dev)
785 (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * 685 (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
786 priv->rx_ring_size, GFP_KERNEL); 686 priv->rx_ring_size, GFP_KERNEL);
787 687
788 if (priv->rx_skbuff == NULL) { 688 if (NULL == priv->rx_skbuff) {
789 if (netif_msg_ifup(priv)) 689 if (netif_msg_ifup(priv))
790 printk(KERN_ERR "%s: Could not allocate rx_skbuff\n", 690 printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
791 dev->name); 691 dev->name);
@@ -879,13 +779,7 @@ int startup_gfar(struct net_device *dev)
879 } 779 }
880 } 780 }
881 781
882 /* Set up the PHY change work queue */ 782 phy_start(priv->phydev);
883 INIT_WORK(&priv->tq, gfar_phy_change, dev);
884
885 init_timer(&priv->phy_info_timer);
886 priv->phy_info_timer.function = &gfar_phy_startup_timer;
887 priv->phy_info_timer.data = (unsigned long) priv->mii_info;
888 mod_timer(&priv->phy_info_timer, jiffies + HZ);
889 783
890 /* Configure the coalescing support */ 784 /* Configure the coalescing support */
891 if (priv->txcoalescing) 785 if (priv->txcoalescing)
@@ -933,11 +827,6 @@ tx_skb_fail:
933 priv->tx_bd_base, 827 priv->tx_bd_base,
934 gfar_read(&regs->tbase0)); 828 gfar_read(&regs->tbase0));
935 829
936 if (priv->mii_info->phyinfo->close)
937 priv->mii_info->phyinfo->close(priv->mii_info);
938
939 kfree(priv->mii_info);
940
941 return err; 830 return err;
942} 831}
943 832
@@ -1035,7 +924,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
1035 txbdp->status &= TXBD_WRAP; 924 txbdp->status &= TXBD_WRAP;
1036 925
1037 /* Set up checksumming */ 926 /* Set up checksumming */
1038 if ((dev->features & NETIF_F_IP_CSUM) 927 if ((dev->features & NETIF_F_IP_CSUM)
1039 && (CHECKSUM_HW == skb->ip_summed)) { 928 && (CHECKSUM_HW == skb->ip_summed)) {
1040 fcb = gfar_add_fcb(skb, txbdp); 929 fcb = gfar_add_fcb(skb, txbdp);
1041 gfar_tx_checksum(skb, fcb); 930 gfar_tx_checksum(skb, fcb);
@@ -1103,11 +992,9 @@ static int gfar_close(struct net_device *dev)
1103 struct gfar_private *priv = netdev_priv(dev); 992 struct gfar_private *priv = netdev_priv(dev);
1104 stop_gfar(dev); 993 stop_gfar(dev);
1105 994
1106 /* Shutdown the PHY */ 995 /* Disconnect from the PHY */
1107 if (priv->mii_info->phyinfo->close) 996 phy_disconnect(priv->phydev);
1108 priv->mii_info->phyinfo->close(priv->mii_info); 997 priv->phydev = NULL;
1109
1110 kfree(priv->mii_info);
1111 998
1112 netif_stop_queue(dev); 999 netif_stop_queue(dev);
1113 1000
@@ -1343,7 +1230,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
1343 while ((!skb) && timeout--) 1230 while ((!skb) && timeout--)
1344 skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT); 1231 skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT);
1345 1232
1346 if (skb == NULL) 1233 if (NULL == skb)
1347 return NULL; 1234 return NULL;
1348 1235
1349 /* We need the data buffer to be aligned properly. We will reserve 1236 /* We need the data buffer to be aligned properly. We will reserve
@@ -1490,7 +1377,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
1490 struct gfar_private *priv = netdev_priv(dev); 1377 struct gfar_private *priv = netdev_priv(dev);
1491 struct rxfcb *fcb = NULL; 1378 struct rxfcb *fcb = NULL;
1492 1379
1493 if (skb == NULL) { 1380 if (NULL == skb) {
1494 if (netif_msg_rx_err(priv)) 1381 if (netif_msg_rx_err(priv))
1495 printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name); 1382 printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name);
1496 priv->stats.rx_dropped++; 1383 priv->stats.rx_dropped++;
@@ -1718,131 +1605,9 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1718 return IRQ_HANDLED; 1605 return IRQ_HANDLED;
1719} 1606}
1720 1607
1721static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1722{
1723 struct net_device *dev = (struct net_device *) dev_id;
1724 struct gfar_private *priv = netdev_priv(dev);
1725
1726 /* Clear the interrupt */
1727 mii_clear_phy_interrupt(priv->mii_info);
1728
1729 /* Disable PHY interrupts */
1730 mii_configure_phy_interrupt(priv->mii_info,
1731 MII_INTERRUPT_DISABLED);
1732
1733 /* Schedule the phy change */
1734 schedule_work(&priv->tq);
1735
1736 return IRQ_HANDLED;
1737}
1738
1739/* Scheduled by the phy_interrupt/timer to handle PHY changes */
1740static void gfar_phy_change(void *data)
1741{
1742 struct net_device *dev = (struct net_device *) data;
1743 struct gfar_private *priv = netdev_priv(dev);
1744 int result = 0;
1745
1746 /* Delay to give the PHY a chance to change the
1747 * register state */
1748 msleep(1);
1749
1750 /* Update the link, speed, duplex */
1751 result = priv->mii_info->phyinfo->read_status(priv->mii_info);
1752
1753 /* Adjust the known status as long as the link
1754 * isn't still coming up */
1755 if((0 == result) || (priv->mii_info->link == 0))
1756 adjust_link(dev);
1757
1758 /* Reenable interrupts, if needed */
1759 if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR)
1760 mii_configure_phy_interrupt(priv->mii_info,
1761 MII_INTERRUPT_ENABLED);
1762}
1763
1764/* Called every so often on systems that don't interrupt
1765 * the core for PHY changes */
1766static void gfar_phy_timer(unsigned long data)
1767{
1768 struct net_device *dev = (struct net_device *) data;
1769 struct gfar_private *priv = netdev_priv(dev);
1770
1771 schedule_work(&priv->tq);
1772
1773 mod_timer(&priv->phy_info_timer, jiffies +
1774 GFAR_PHY_CHANGE_TIME * HZ);
1775}
1776
1777/* Keep trying aneg for some time
1778 * If, after GFAR_AN_TIMEOUT seconds, it has not
1779 * finished, we switch to forced.
1780 * Either way, once the process has completed, we either
1781 * request the interrupt, or switch the timer over to
1782 * using gfar_phy_timer to check status */
1783static void gfar_phy_startup_timer(unsigned long data)
1784{
1785 int result;
1786 static int secondary = GFAR_AN_TIMEOUT;
1787 struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
1788 struct gfar_private *priv = netdev_priv(mii_info->dev);
1789
1790 /* Configure the Auto-negotiation */
1791 result = mii_info->phyinfo->config_aneg(mii_info);
1792
1793 /* If autonegotiation failed to start, and
1794 * we haven't timed out, reset the timer, and return */
1795 if (result && secondary--) {
1796 mod_timer(&priv->phy_info_timer, jiffies + HZ);
1797 return;
1798 } else if (result) {
1799 /* Couldn't start autonegotiation.
1800 * Try switching to forced */
1801 mii_info->autoneg = 0;
1802 result = mii_info->phyinfo->config_aneg(mii_info);
1803
1804 /* Forcing failed! Give up */
1805 if(result) {
1806 if (netif_msg_link(priv))
1807 printk(KERN_ERR "%s: Forcing failed!\n",
1808 mii_info->dev->name);
1809 return;
1810 }
1811 }
1812
1813 /* Kill the timer so it can be restarted */
1814 del_timer_sync(&priv->phy_info_timer);
1815
1816 /* Grab the PHY interrupt, if necessary/possible */
1817 if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) {
1818 if (request_irq(priv->einfo->interruptPHY,
1819 phy_interrupt,
1820 SA_SHIRQ,
1821 "phy_interrupt",
1822 mii_info->dev) < 0) {
1823 if (netif_msg_intr(priv))
1824 printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n",
1825 mii_info->dev->name,
1826 priv->einfo->interruptPHY);
1827 } else {
1828 mii_configure_phy_interrupt(priv->mii_info,
1829 MII_INTERRUPT_ENABLED);
1830 return;
1831 }
1832 }
1833
1834 /* Start the timer again, this time in order to
1835 * handle a change in status */
1836 init_timer(&priv->phy_info_timer);
1837 priv->phy_info_timer.function = &gfar_phy_timer;
1838 priv->phy_info_timer.data = (unsigned long) mii_info->dev;
1839 mod_timer(&priv->phy_info_timer, jiffies +
1840 GFAR_PHY_CHANGE_TIME * HZ);
1841}
1842
1843/* Called every time the controller might need to be made 1608/* Called every time the controller might need to be made
1844 * aware of new link state. The PHY code conveys this 1609 * aware of new link state. The PHY code conveys this
1845 * information through variables in the priv structure, and this 1610 * information through variables in the phydev structure, and this
1846 * function converts those variables into the appropriate 1611 * function converts those variables into the appropriate
1847 * register values, and can bring down the device if needed. 1612 * register values, and can bring down the device if needed.
1848 */ 1613 */
@@ -1850,84 +1615,68 @@ static void adjust_link(struct net_device *dev)
1850{ 1615{
1851 struct gfar_private *priv = netdev_priv(dev); 1616 struct gfar_private *priv = netdev_priv(dev);
1852 struct gfar *regs = priv->regs; 1617 struct gfar *regs = priv->regs;
1853 u32 tempval; 1618 unsigned long flags;
1854 struct gfar_mii_info *mii_info = priv->mii_info; 1619 struct phy_device *phydev = priv->phydev;
1620 int new_state = 0;
1621
1622 spin_lock_irqsave(&priv->lock, flags);
1623 if (phydev->link) {
1624 u32 tempval = gfar_read(&regs->maccfg2);
1855 1625
1856 if (mii_info->link) {
1857 /* Now we make sure that we can be in full duplex mode. 1626 /* Now we make sure that we can be in full duplex mode.
1858 * If not, we operate in half-duplex mode. */ 1627 * If not, we operate in half-duplex mode. */
1859 if (mii_info->duplex != priv->oldduplex) { 1628 if (phydev->duplex != priv->oldduplex) {
1860 if (!(mii_info->duplex)) { 1629 new_state = 1;
1861 tempval = gfar_read(&regs->maccfg2); 1630 if (!(phydev->duplex))
1862 tempval &= ~(MACCFG2_FULL_DUPLEX); 1631 tempval &= ~(MACCFG2_FULL_DUPLEX);
1863 gfar_write(&regs->maccfg2, tempval); 1632 else
1864
1865 if (netif_msg_link(priv))
1866 printk(KERN_INFO "%s: Half Duplex\n",
1867 dev->name);
1868 } else {
1869 tempval = gfar_read(&regs->maccfg2);
1870 tempval |= MACCFG2_FULL_DUPLEX; 1633 tempval |= MACCFG2_FULL_DUPLEX;
1871 gfar_write(&regs->maccfg2, tempval);
1872 1634
1873 if (netif_msg_link(priv)) 1635 priv->oldduplex = phydev->duplex;
1874 printk(KERN_INFO "%s: Full Duplex\n",
1875 dev->name);
1876 }
1877
1878 priv->oldduplex = mii_info->duplex;
1879 } 1636 }
1880 1637
1881 if (mii_info->speed != priv->oldspeed) { 1638 if (phydev->speed != priv->oldspeed) {
1882 switch (mii_info->speed) { 1639 new_state = 1;
1640 switch (phydev->speed) {
1883 case 1000: 1641 case 1000:
1884 tempval = gfar_read(&regs->maccfg2);
1885 tempval = 1642 tempval =
1886 ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); 1643 ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
1887 gfar_write(&regs->maccfg2, tempval);
1888 break; 1644 break;
1889 case 100: 1645 case 100:
1890 case 10: 1646 case 10:
1891 tempval = gfar_read(&regs->maccfg2);
1892 tempval = 1647 tempval =
1893 ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); 1648 ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
1894 gfar_write(&regs->maccfg2, tempval);
1895 break; 1649 break;
1896 default: 1650 default:
1897 if (netif_msg_link(priv)) 1651 if (netif_msg_link(priv))
1898 printk(KERN_WARNING 1652 printk(KERN_WARNING
1899 "%s: Ack! Speed (%d) is not 10/100/1000!\n", 1653 "%s: Ack! Speed (%d) is not 10/100/1000!\n",
1900 dev->name, mii_info->speed); 1654 dev->name, phydev->speed);
1901 break; 1655 break;
1902 } 1656 }
1903 1657
1904 if (netif_msg_link(priv)) 1658 priv->oldspeed = phydev->speed;
1905 printk(KERN_INFO "%s: Speed %dBT\n", dev->name,
1906 mii_info->speed);
1907
1908 priv->oldspeed = mii_info->speed;
1909 } 1659 }
1910 1660
1661 gfar_write(&regs->maccfg2, tempval);
1662
1911 if (!priv->oldlink) { 1663 if (!priv->oldlink) {
1912 if (netif_msg_link(priv)) 1664 new_state = 1;
1913 printk(KERN_INFO "%s: Link is up\n", dev->name);
1914 priv->oldlink = 1; 1665 priv->oldlink = 1;
1915 netif_carrier_on(dev);
1916 netif_schedule(dev); 1666 netif_schedule(dev);
1917 } 1667 }
1918 } else { 1668 } else if (priv->oldlink) {
1919 if (priv->oldlink) { 1669 new_state = 1;
1920 if (netif_msg_link(priv)) 1670 priv->oldlink = 0;
1921 printk(KERN_INFO "%s: Link is down\n", 1671 priv->oldspeed = 0;
1922 dev->name); 1672 priv->oldduplex = -1;
1923 priv->oldlink = 0;
1924 priv->oldspeed = 0;
1925 priv->oldduplex = -1;
1926 netif_carrier_off(dev);
1927 }
1928 } 1673 }
1929}
1930 1674
1675 if (new_state && netif_msg_link(priv))
1676 phy_print_status(phydev);
1677
1678 spin_unlock_irqrestore(&priv->lock, flags);
1679}
1931 1680
1932/* Update the hash table based on the current list of multicast 1681/* Update the hash table based on the current list of multicast
1933 * addresses we subscribe to. Also, change the promiscuity of 1682 * addresses we subscribe to. Also, change the promiscuity of
@@ -2122,12 +1871,23 @@ static struct device_driver gfar_driver = {
2122 1871
2123static int __init gfar_init(void) 1872static int __init gfar_init(void)
2124{ 1873{
2125 return driver_register(&gfar_driver); 1874 int err = gfar_mdio_init();
1875
1876 if (err)
1877 return err;
1878
1879 err = driver_register(&gfar_driver);
1880
1881 if (err)
1882 gfar_mdio_exit();
1883
1884 return err;
2126} 1885}
2127 1886
2128static void __exit gfar_exit(void) 1887static void __exit gfar_exit(void)
2129{ 1888{
2130 driver_unregister(&gfar_driver); 1889 driver_unregister(&gfar_driver);
1890 gfar_mdio_exit();
2131} 1891}
2132 1892
2133module_init(gfar_init); 1893module_init(gfar_init);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 28af087d9fbb..c77ca6c0d04a 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -17,7 +17,6 @@
17 * 17 *
18 * Still left to do: 18 * Still left to do:
19 * -Add support for module parameters 19 * -Add support for module parameters
20 * -Add support for ethtool -s
21 * -Add patch for ethtool phys id 20 * -Add patch for ethtool phys id
22 */ 21 */
23#ifndef __GIANFAR_H 22#ifndef __GIANFAR_H
@@ -37,7 +36,8 @@
37#include <linux/skbuff.h> 36#include <linux/skbuff.h>
38#include <linux/spinlock.h> 37#include <linux/spinlock.h>
39#include <linux/mm.h> 38#include <linux/mm.h>
40#include <linux/fsl_devices.h> 39#include <linux/mii.h>
40#include <linux/phy.h>
41 41
42#include <asm/io.h> 42#include <asm/io.h>
43#include <asm/irq.h> 43#include <asm/irq.h>
@@ -48,7 +48,8 @@
48#include <linux/workqueue.h> 48#include <linux/workqueue.h>
49#include <linux/ethtool.h> 49#include <linux/ethtool.h>
50#include <linux/netdevice.h> 50#include <linux/netdevice.h>
51#include "gianfar_phy.h" 51#include <linux/fsl_devices.h>
52#include "gianfar_mii.h"
52 53
53/* The maximum number of packets to be handled in one call of gfar_poll */ 54/* The maximum number of packets to be handled in one call of gfar_poll */
54#define GFAR_DEV_WEIGHT 64 55#define GFAR_DEV_WEIGHT 64
@@ -73,7 +74,7 @@
73#define PHY_INIT_TIMEOUT 100000 74#define PHY_INIT_TIMEOUT 100000
74#define GFAR_PHY_CHANGE_TIME 2 75#define GFAR_PHY_CHANGE_TIME 2
75 76
76#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.1, " 77#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.2, "
77#define DRV_NAME "gfar-enet" 78#define DRV_NAME "gfar-enet"
78extern const char gfar_driver_name[]; 79extern const char gfar_driver_name[];
79extern const char gfar_driver_version[]; 80extern const char gfar_driver_version[];
@@ -578,12 +579,7 @@ struct gfar {
578 u32 hafdup; /* 0x.50c - Half Duplex Register */ 579 u32 hafdup; /* 0x.50c - Half Duplex Register */
579 u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */ 580 u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */
580 u8 res18[12]; 581 u8 res18[12];
581 u32 miimcfg; /* 0x.520 - MII Management Configuration Register */ 582 u8 gfar_mii_regs[24]; /* See gianfar_phy.h */
582 u32 miimcom; /* 0x.524 - MII Management Command Register */
583 u32 miimadd; /* 0x.528 - MII Management Address Register */
584 u32 miimcon; /* 0x.52c - MII Management Control Register */
585 u32 miimstat; /* 0x.530 - MII Management Status Register */
586 u32 miimind; /* 0x.534 - MII Management Indicator Register */
587 u8 res19[4]; 583 u8 res19[4];
588 u32 ifstat; /* 0x.53c - Interface Status Register */ 584 u32 ifstat; /* 0x.53c - Interface Status Register */
589 u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */ 585 u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */
@@ -688,9 +684,6 @@ struct gfar_private {
688 struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */ 684 struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */
689 u32 *hash_regs[16]; 685 u32 *hash_regs[16];
690 int hash_width; 686 int hash_width;
691 struct gfar *phyregs;
692 struct work_struct tq;
693 struct timer_list phy_info_timer;
694 struct net_device_stats stats; /* linux network statistics */ 687 struct net_device_stats stats; /* linux network statistics */
695 struct gfar_extra_stats extra_stats; 688 struct gfar_extra_stats extra_stats;
696 spinlock_t lock; 689 spinlock_t lock;
@@ -710,7 +703,8 @@ struct gfar_private {
710 unsigned int interruptError; 703 unsigned int interruptError;
711 struct gianfar_platform_data *einfo; 704 struct gianfar_platform_data *einfo;
712 705
713 struct gfar_mii_info *mii_info; 706 struct phy_device *phydev;
707 struct mii_bus *mii_bus;
714 int oldspeed; 708 int oldspeed;
715 int oldduplex; 709 int oldduplex;
716 int oldlink; 710 int oldlink;
@@ -732,4 +726,12 @@ extern inline void gfar_write(volatile unsigned *addr, u32 val)
732 726
733extern struct ethtool_ops *gfar_op_array[]; 727extern struct ethtool_ops *gfar_op_array[];
734 728
729extern irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
730extern int startup_gfar(struct net_device *dev);
731extern void stop_gfar(struct net_device *dev);
732extern void gfar_halt(struct net_device *dev);
733extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
734 int enable, u32 regnum, u32 read);
735void gfar_setup_stashing(struct net_device *dev);
736
735#endif /* __GIANFAR_H */ 737#endif /* __GIANFAR_H */
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index a451de629197..68e3578e7613 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -39,17 +39,18 @@
39#include <asm/types.h> 39#include <asm/types.h>
40#include <asm/uaccess.h> 40#include <asm/uaccess.h>
41#include <linux/ethtool.h> 41#include <linux/ethtool.h>
42#include <linux/mii.h>
43#include <linux/phy.h>
42 44
43#include "gianfar.h" 45#include "gianfar.h"
44 46
45#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) 47#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
46 48
47extern int startup_gfar(struct net_device *dev);
48extern void stop_gfar(struct net_device *dev);
49extern void gfar_halt(struct net_device *dev);
50extern void gfar_start(struct net_device *dev); 49extern void gfar_start(struct net_device *dev);
51extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); 50extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
52 51
52#define GFAR_MAX_COAL_USECS 0xffff
53#define GFAR_MAX_COAL_FRAMES 0xff
53static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, 54static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
54 u64 * buf); 55 u64 * buf);
55static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf); 56static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf);
@@ -182,38 +183,32 @@ static void gfar_gdrvinfo(struct net_device *dev, struct
182 drvinfo->eedump_len = 0; 183 drvinfo->eedump_len = 0;
183} 184}
184 185
186
187static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd)
188{
189 struct gfar_private *priv = netdev_priv(dev);
190 struct phy_device *phydev = priv->phydev;
191
192 if (NULL == phydev)
193 return -ENODEV;
194
195 return phy_ethtool_sset(phydev, cmd);
196}
197
198
185/* Return the current settings in the ethtool_cmd structure */ 199/* Return the current settings in the ethtool_cmd structure */
186static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd) 200static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
187{ 201{
188 struct gfar_private *priv = netdev_priv(dev); 202 struct gfar_private *priv = netdev_priv(dev);
189 uint gigabit_support = 203 struct phy_device *phydev = priv->phydev;
190 priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? 204
191 SUPPORTED_1000baseT_Full : 0; 205 if (NULL == phydev)
192 uint gigabit_advert = 206 return -ENODEV;
193 priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? 207
194 ADVERTISED_1000baseT_Full: 0;
195
196 cmd->supported = (SUPPORTED_10baseT_Half
197 | SUPPORTED_100baseT_Half
198 | SUPPORTED_100baseT_Full
199 | gigabit_support | SUPPORTED_Autoneg);
200
201 /* For now, we always advertise everything */
202 cmd->advertising = (ADVERTISED_10baseT_Half
203 | ADVERTISED_100baseT_Half
204 | ADVERTISED_100baseT_Full
205 | gigabit_advert | ADVERTISED_Autoneg);
206
207 cmd->speed = priv->mii_info->speed;
208 cmd->duplex = priv->mii_info->duplex;
209 cmd->port = PORT_MII;
210 cmd->phy_address = priv->mii_info->mii_id;
211 cmd->transceiver = XCVR_EXTERNAL;
212 cmd->autoneg = AUTONEG_ENABLE;
213 cmd->maxtxpkt = priv->txcount; 208 cmd->maxtxpkt = priv->txcount;
214 cmd->maxrxpkt = priv->rxcount; 209 cmd->maxrxpkt = priv->rxcount;
215 210
216 return 0; 211 return phy_ethtool_gset(phydev, cmd);
217} 212}
218 213
219/* Return the length of the register structure */ 214/* Return the length of the register structure */
@@ -241,14 +236,14 @@ static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int use
241 unsigned int count; 236 unsigned int count;
242 237
243 /* The timer is different, depending on the interface speed */ 238 /* The timer is different, depending on the interface speed */
244 switch (priv->mii_info->speed) { 239 switch (priv->phydev->speed) {
245 case 1000: 240 case SPEED_1000:
246 count = GFAR_GBIT_TIME; 241 count = GFAR_GBIT_TIME;
247 break; 242 break;
248 case 100: 243 case SPEED_100:
249 count = GFAR_100_TIME; 244 count = GFAR_100_TIME;
250 break; 245 break;
251 case 10: 246 case SPEED_10:
252 default: 247 default:
253 count = GFAR_10_TIME; 248 count = GFAR_10_TIME;
254 break; 249 break;
@@ -265,14 +260,14 @@ static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int tic
265 unsigned int count; 260 unsigned int count;
266 261
267 /* The timer is different, depending on the interface speed */ 262 /* The timer is different, depending on the interface speed */
268 switch (priv->mii_info->speed) { 263 switch (priv->phydev->speed) {
269 case 1000: 264 case SPEED_1000:
270 count = GFAR_GBIT_TIME; 265 count = GFAR_GBIT_TIME;
271 break; 266 break;
272 case 100: 267 case SPEED_100:
273 count = GFAR_100_TIME; 268 count = GFAR_100_TIME;
274 break; 269 break;
275 case 10: 270 case SPEED_10:
276 default: 271 default:
277 count = GFAR_10_TIME; 272 count = GFAR_10_TIME;
278 break; 273 break;
@@ -292,6 +287,9 @@ static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
292 if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) 287 if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
293 return -EOPNOTSUPP; 288 return -EOPNOTSUPP;
294 289
290 if (NULL == priv->phydev)
291 return -ENODEV;
292
295 cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime); 293 cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
296 cvals->rx_max_coalesced_frames = priv->rxcount; 294 cvals->rx_max_coalesced_frames = priv->rxcount;
297 295
@@ -348,6 +346,22 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
348 else 346 else
349 priv->rxcoalescing = 1; 347 priv->rxcoalescing = 1;
350 348
349 if (NULL == priv->phydev)
350 return -ENODEV;
351
352 /* Check the bounds of the values */
353 if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
354 pr_info("Coalescing is limited to %d microseconds\n",
355 GFAR_MAX_COAL_USECS);
356 return -EINVAL;
357 }
358
359 if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
360 pr_info("Coalescing is limited to %d frames\n",
361 GFAR_MAX_COAL_FRAMES);
362 return -EINVAL;
363 }
364
351 priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs); 365 priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs);
352 priv->rxcount = cvals->rx_max_coalesced_frames; 366 priv->rxcount = cvals->rx_max_coalesced_frames;
353 367
@@ -358,6 +372,19 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
358 else 372 else
359 priv->txcoalescing = 1; 373 priv->txcoalescing = 1;
360 374
375 /* Check the bounds of the values */
376 if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
377 pr_info("Coalescing is limited to %d microseconds\n",
378 GFAR_MAX_COAL_USECS);
379 return -EINVAL;
380 }
381
382 if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
383 pr_info("Coalescing is limited to %d frames\n",
384 GFAR_MAX_COAL_FRAMES);
385 return -EINVAL;
386 }
387
361 priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs); 388 priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs);
362 priv->txcount = cvals->tx_max_coalesced_frames; 389 priv->txcount = cvals->tx_max_coalesced_frames;
363 390
@@ -536,6 +563,7 @@ static void gfar_set_msglevel(struct net_device *dev, uint32_t data)
536 563
537struct ethtool_ops gfar_ethtool_ops = { 564struct ethtool_ops gfar_ethtool_ops = {
538 .get_settings = gfar_gsettings, 565 .get_settings = gfar_gsettings,
566 .set_settings = gfar_ssettings,
539 .get_drvinfo = gfar_gdrvinfo, 567 .get_drvinfo = gfar_gdrvinfo,
540 .get_regs_len = gfar_reglen, 568 .get_regs_len = gfar_reglen,
541 .get_regs = gfar_get_regs, 569 .get_regs = gfar_get_regs,
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
new file mode 100644
index 000000000000..1eca1dbca7f1
--- /dev/null
+++ b/drivers/net/gianfar_mii.c
@@ -0,0 +1,219 @@
1/*
2 * drivers/net/gianfar_mii.c
3 *
4 * Gianfar Ethernet Driver -- MIIM bus implementation
5 * Provides Bus interface for MIIM regs
6 *
7 * Author: Andy Fleming
8 * Maintainer: Kumar Gala (kumar.gala@freescale.com)
9 *
10 * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 */
18
19#include <linux/config.h>
20#include <linux/kernel.h>
21#include <linux/sched.h>
22#include <linux/string.h>
23#include <linux/errno.h>
24#include <linux/unistd.h>
25#include <linux/slab.h>
26#include <linux/interrupt.h>
27#include <linux/init.h>
28#include <linux/delay.h>
29#include <linux/netdevice.h>
30#include <linux/etherdevice.h>
31#include <linux/skbuff.h>
32#include <linux/spinlock.h>
33#include <linux/mm.h>
34#include <linux/module.h>
35#include <linux/version.h>
36#include <asm/ocp.h>
37#include <linux/crc32.h>
38#include <linux/mii.h>
39#include <linux/phy.h>
40
41#include <asm/io.h>
42#include <asm/irq.h>
43#include <asm/uaccess.h>
44
45#include "gianfar.h"
46#include "gianfar_mii.h"
47
48/* Write value to the PHY at mii_id at register regnum,
49 * on the bus, waiting until the write is done before returning.
50 * All PHY configuration is done through the TSEC1 MIIM regs */
51int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
52{
53 struct gfar_mii *regs = bus->priv;
54
55 /* Set the PHY address and the register address we want to write */
56 gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
57
58 /* Write out the value we want */
59 gfar_write(&regs->miimcon, value);
60
61 /* Wait for the transaction to finish */
62 while (gfar_read(&regs->miimind) & MIIMIND_BUSY)
63 cpu_relax();
64
65 return 0;
66}
67
68/* Read the bus for PHY at addr mii_id, register regnum, and
69 * return the value. Clears miimcom first. All PHY
70 * configuration has to be done through the TSEC1 MIIM regs */
71int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
72{
73 struct gfar_mii *regs = bus->priv;
74 u16 value;
75
76 /* Set the PHY address and the register address we want to read */
77 gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
78
79 /* Clear miimcom, and then initiate a read */
80 gfar_write(&regs->miimcom, 0);
81 gfar_write(&regs->miimcom, MII_READ_COMMAND);
82
83 /* Wait for the transaction to finish */
84 while (gfar_read(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
85 cpu_relax();
86
87 /* Grab the value of the register from miimstat */
88 value = gfar_read(&regs->miimstat);
89
90 return value;
91}
92
93
94/* Reset the MIIM registers, and wait for the bus to free */
95int gfar_mdio_reset(struct mii_bus *bus)
96{
97 struct gfar_mii *regs = bus->priv;
98 unsigned int timeout = PHY_INIT_TIMEOUT;
99
100 spin_lock_bh(&bus->mdio_lock);
101
102 /* Reset the management interface */
103 gfar_write(&regs->miimcfg, MIIMCFG_RESET);
104
105 /* Setup the MII Mgmt clock speed */
106 gfar_write(&regs->miimcfg, MIIMCFG_INIT_VALUE);
107
108 /* Wait until the bus is free */
109 while ((gfar_read(&regs->miimind) & MIIMIND_BUSY) &&
110 timeout--)
111 cpu_relax();
112
113 spin_unlock_bh(&bus->mdio_lock);
114
115 if(timeout <= 0) {
116 printk(KERN_ERR "%s: The MII Bus is stuck!\n",
117 bus->name);
118 return -EBUSY;
119 }
120
121 return 0;
122}
123
124
125int gfar_mdio_probe(struct device *dev)
126{
127 struct platform_device *pdev = to_platform_device(dev);
128 struct gianfar_mdio_data *pdata;
129 struct gfar_mii *regs;
130 struct mii_bus *new_bus;
131 int err = 0;
132
133 if (NULL == dev)
134 return -EINVAL;
135
136 new_bus = kmalloc(sizeof(struct mii_bus), GFP_KERNEL);
137
138 if (NULL == new_bus)
139 return -ENOMEM;
140
141 new_bus->name = "Gianfar MII Bus",
142 new_bus->read = &gfar_mdio_read,
143 new_bus->write = &gfar_mdio_write,
144 new_bus->reset = &gfar_mdio_reset,
145 new_bus->id = pdev->id;
146
147 pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
148
149 if (NULL == pdata) {
150 printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
151 return -ENODEV;
152 }
153
154 /* Set the PHY base address */
155 regs = (struct gfar_mii *) ioremap(pdata->paddr,
156 sizeof (struct gfar_mii));
157
158 if (NULL == regs) {
159 err = -ENOMEM;
160 goto reg_map_fail;
161 }
162
163 new_bus->priv = regs;
164
165 new_bus->irq = pdata->irq;
166
167 new_bus->dev = dev;
168 dev_set_drvdata(dev, new_bus);
169
170 err = mdiobus_register(new_bus);
171
172 if (0 != err) {
173 printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
174 new_bus->name);
175 goto bus_register_fail;
176 }
177
178 return 0;
179
180bus_register_fail:
181 iounmap((void *) regs);
182reg_map_fail:
183 kfree(new_bus);
184
185 return err;
186}
187
188
189int gfar_mdio_remove(struct device *dev)
190{
191 struct mii_bus *bus = dev_get_drvdata(dev);
192
193 mdiobus_unregister(bus);
194
195 dev_set_drvdata(dev, NULL);
196
197 iounmap((void *) (&bus->priv));
198 bus->priv = NULL;
199 kfree(bus);
200
201 return 0;
202}
203
204static struct device_driver gianfar_mdio_driver = {
205 .name = "fsl-gianfar_mdio",
206 .bus = &platform_bus_type,
207 .probe = gfar_mdio_probe,
208 .remove = gfar_mdio_remove,
209};
210
211int __init gfar_mdio_init(void)
212{
213 return driver_register(&gianfar_mdio_driver);
214}
215
216void __exit gfar_mdio_exit(void)
217{
218 driver_unregister(&gianfar_mdio_driver);
219}
diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h
new file mode 100644
index 000000000000..56e5665d5c9b
--- /dev/null
+++ b/drivers/net/gianfar_mii.h
@@ -0,0 +1,45 @@
1/*
2 * drivers/net/gianfar_mii.h
3 *
4 * Gianfar Ethernet Driver -- MII Management Bus Implementation
5 * Driver for the MDIO bus controller in the Gianfar register space
6 *
7 * Author: Andy Fleming
8 * Maintainer: Kumar Gala (kumar.gala@freescale.com)
9 *
10 * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 */
18#ifndef __GIANFAR_MII_H
19#define __GIANFAR_MII_H
20
21#define MIIMIND_BUSY 0x00000001
22#define MIIMIND_NOTVALID 0x00000004
23
24#define MII_READ_COMMAND 0x00000001
25
26#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
27 | SUPPORTED_100baseT_Half \
28 | SUPPORTED_100baseT_Full \
29 | SUPPORTED_Autoneg \
30 | SUPPORTED_MII)
31
32struct gfar_mii {
33 u32 miimcfg; /* 0x.520 - MII Management Config Register */
34 u32 miimcom; /* 0x.524 - MII Management Command Register */
35 u32 miimadd; /* 0x.528 - MII Management Address Register */
36 u32 miimcon; /* 0x.52c - MII Management Control Register */
37 u32 miimstat; /* 0x.530 - MII Management Status Register */
38 u32 miimind; /* 0x.534 - MII Management Indicator Register */
39};
40
41int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
42int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
43int __init gfar_mdio_init(void);
44void __exit gfar_mdio_exit(void);
45#endif /* GIANFAR_PHY_H */
diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c
deleted file mode 100644
index 7c965f268a82..000000000000
--- a/drivers/net/gianfar_phy.c
+++ /dev/null
@@ -1,661 +0,0 @@
1/*
2 * drivers/net/gianfar_phy.c
3 *
4 * Gianfar Ethernet Driver -- PHY handling
5 * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
6 * Based on 8260_io/fcc_enet.c
7 *
8 * Author: Andy Fleming
9 * Maintainer: Kumar Gala (kumar.gala@freescale.com)
10 *
11 * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2 of the License, or (at your
16 * option) any later version.
17 *
18 */
19
20#include <linux/config.h>
21#include <linux/kernel.h>
22#include <linux/sched.h>
23#include <linux/string.h>
24#include <linux/errno.h>
25#include <linux/slab.h>
26#include <linux/interrupt.h>
27#include <linux/init.h>
28#include <linux/delay.h>
29#include <linux/netdevice.h>
30#include <linux/etherdevice.h>
31#include <linux/skbuff.h>
32#include <linux/spinlock.h>
33#include <linux/mm.h>
34
35#include <asm/io.h>
36#include <asm/irq.h>
37#include <asm/uaccess.h>
38#include <linux/module.h>
39#include <linux/version.h>
40#include <linux/crc32.h>
41#include <linux/mii.h>
42
43#include "gianfar.h"
44#include "gianfar_phy.h"
45
46static void config_genmii_advert(struct gfar_mii_info *mii_info);
47static void genmii_setup_forced(struct gfar_mii_info *mii_info);
48static void genmii_restart_aneg(struct gfar_mii_info *mii_info);
49static int gbit_config_aneg(struct gfar_mii_info *mii_info);
50static int genmii_config_aneg(struct gfar_mii_info *mii_info);
51static int genmii_update_link(struct gfar_mii_info *mii_info);
52static int genmii_read_status(struct gfar_mii_info *mii_info);
53u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum);
54void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val);
55
56/* Write value to the PHY for this device to the register at regnum, */
57/* waiting until the write is done before it returns. All PHY */
58/* configuration has to be done through the TSEC1 MIIM regs */
59void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
60{
61 struct gfar_private *priv = netdev_priv(dev);
62 struct gfar *regbase = priv->phyregs;
63
64 /* Set the PHY address and the register address we want to write */
65 gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
66
67 /* Write out the value we want */
68 gfar_write(&regbase->miimcon, value);
69
70 /* Wait for the transaction to finish */
71 while (gfar_read(&regbase->miimind) & MIIMIND_BUSY)
72 cpu_relax();
73}
74
75/* Reads from register regnum in the PHY for device dev, */
76/* returning the value. Clears miimcom first. All PHY */
77/* configuration has to be done through the TSEC1 MIIM regs */
78int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
79{
80 struct gfar_private *priv = netdev_priv(dev);
81 struct gfar *regbase = priv->phyregs;
82 u16 value;
83
84 /* Set the PHY address and the register address we want to read */
85 gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
86
87 /* Clear miimcom, and then initiate a read */
88 gfar_write(&regbase->miimcom, 0);
89 gfar_write(&regbase->miimcom, MII_READ_COMMAND);
90
91 /* Wait for the transaction to finish */
92 while (gfar_read(&regbase->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
93 cpu_relax();
94
95 /* Grab the value of the register from miimstat */
96 value = gfar_read(&regbase->miimstat);
97
98 return value;
99}
100
101void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info)
102{
103 if(mii_info->phyinfo->ack_interrupt)
104 mii_info->phyinfo->ack_interrupt(mii_info);
105}
106
107
108void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts)
109{
110 mii_info->interrupts = interrupts;
111 if(mii_info->phyinfo->config_intr)
112 mii_info->phyinfo->config_intr(mii_info);
113}
114
115
116/* Writes MII_ADVERTISE with the appropriate values, after
117 * sanitizing advertise to make sure only supported features
118 * are advertised
119 */
120static void config_genmii_advert(struct gfar_mii_info *mii_info)
121{
122 u32 advertise;
123 u16 adv;
124
125 /* Only allow advertising what this PHY supports */
126 mii_info->advertising &= mii_info->phyinfo->features;
127 advertise = mii_info->advertising;
128
129 /* Setup standard advertisement */
130 adv = phy_read(mii_info, MII_ADVERTISE);
131 adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
132 if (advertise & ADVERTISED_10baseT_Half)
133 adv |= ADVERTISE_10HALF;
134 if (advertise & ADVERTISED_10baseT_Full)
135 adv |= ADVERTISE_10FULL;
136 if (advertise & ADVERTISED_100baseT_Half)
137 adv |= ADVERTISE_100HALF;
138 if (advertise & ADVERTISED_100baseT_Full)
139 adv |= ADVERTISE_100FULL;
140 phy_write(mii_info, MII_ADVERTISE, adv);
141}
142
143static void genmii_setup_forced(struct gfar_mii_info *mii_info)
144{
145 u16 ctrl;
146 u32 features = mii_info->phyinfo->features;
147
148 ctrl = phy_read(mii_info, MII_BMCR);
149
150 ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE);
151 ctrl |= BMCR_RESET;
152
153 switch(mii_info->speed) {
154 case SPEED_1000:
155 if(features & (SUPPORTED_1000baseT_Half
156 | SUPPORTED_1000baseT_Full)) {
157 ctrl |= BMCR_SPEED1000;
158 break;
159 }
160 mii_info->speed = SPEED_100;
161 case SPEED_100:
162 if (features & (SUPPORTED_100baseT_Half
163 | SUPPORTED_100baseT_Full)) {
164 ctrl |= BMCR_SPEED100;
165 break;
166 }
167 mii_info->speed = SPEED_10;
168 case SPEED_10:
169 if (features & (SUPPORTED_10baseT_Half
170 | SUPPORTED_10baseT_Full))
171 break;
172 default: /* Unsupported speed! */
173 printk(KERN_ERR "%s: Bad speed!\n",
174 mii_info->dev->name);
175 break;
176 }
177
178 phy_write(mii_info, MII_BMCR, ctrl);
179}
180
181
182/* Enable and Restart Autonegotiation */
183static void genmii_restart_aneg(struct gfar_mii_info *mii_info)
184{
185 u16 ctl;
186
187 ctl = phy_read(mii_info, MII_BMCR);
188 ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
189 phy_write(mii_info, MII_BMCR, ctl);
190}
191
192
193static int gbit_config_aneg(struct gfar_mii_info *mii_info)
194{
195 u16 adv;
196 u32 advertise;
197
198 if(mii_info->autoneg) {
199 /* Configure the ADVERTISE register */
200 config_genmii_advert(mii_info);
201 advertise = mii_info->advertising;
202
203 adv = phy_read(mii_info, MII_1000BASETCONTROL);
204 adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
205 MII_1000BASETCONTROL_HALFDUPLEXCAP);
206 if (advertise & SUPPORTED_1000baseT_Half)
207 adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
208 if (advertise & SUPPORTED_1000baseT_Full)
209 adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
210 phy_write(mii_info, MII_1000BASETCONTROL, adv);
211
212 /* Start/Restart aneg */
213 genmii_restart_aneg(mii_info);
214 } else
215 genmii_setup_forced(mii_info);
216
217 return 0;
218}
219
220static int marvell_config_aneg(struct gfar_mii_info *mii_info)
221{
222 /* The Marvell PHY has an errata which requires
223 * that certain registers get written in order
224 * to restart autonegotiation */
225 phy_write(mii_info, MII_BMCR, BMCR_RESET);
226
227 phy_write(mii_info, 0x1d, 0x1f);
228 phy_write(mii_info, 0x1e, 0x200c);
229 phy_write(mii_info, 0x1d, 0x5);
230 phy_write(mii_info, 0x1e, 0);
231 phy_write(mii_info, 0x1e, 0x100);
232
233 gbit_config_aneg(mii_info);
234
235 return 0;
236}
237static int genmii_config_aneg(struct gfar_mii_info *mii_info)
238{
239 if (mii_info->autoneg) {
240 config_genmii_advert(mii_info);
241 genmii_restart_aneg(mii_info);
242 } else
243 genmii_setup_forced(mii_info);
244
245 return 0;
246}
247
248
249static int genmii_update_link(struct gfar_mii_info *mii_info)
250{
251 u16 status;
252
253 /* Do a fake read */
254 phy_read(mii_info, MII_BMSR);
255
256 /* Read link and autonegotiation status */
257 status = phy_read(mii_info, MII_BMSR);
258 if ((status & BMSR_LSTATUS) == 0)
259 mii_info->link = 0;
260 else
261 mii_info->link = 1;
262
263 /* If we are autonegotiating, and not done,
264 * return an error */
265 if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
266 return -EAGAIN;
267
268 return 0;
269}
270
271static int genmii_read_status(struct gfar_mii_info *mii_info)
272{
273 u16 status;
274 int err;
275
276 /* Update the link, but return if there
277 * was an error */
278 err = genmii_update_link(mii_info);
279 if (err)
280 return err;
281
282 if (mii_info->autoneg) {
283 status = phy_read(mii_info, MII_LPA);
284
285 if (status & (LPA_10FULL | LPA_100FULL))
286 mii_info->duplex = DUPLEX_FULL;
287 else
288 mii_info->duplex = DUPLEX_HALF;
289 if (status & (LPA_100FULL | LPA_100HALF))
290 mii_info->speed = SPEED_100;
291 else
292 mii_info->speed = SPEED_10;
293 mii_info->pause = 0;
294 }
295 /* On non-aneg, we assume what we put in BMCR is the speed,
296 * though magic-aneg shouldn't prevent this case from occurring
297 */
298
299 return 0;
300}
301static int marvell_read_status(struct gfar_mii_info *mii_info)
302{
303 u16 status;
304 int err;
305
306 /* Update the link, but return if there
307 * was an error */
308 err = genmii_update_link(mii_info);
309 if (err)
310 return err;
311
312 /* If the link is up, read the speed and duplex */
313 /* If we aren't autonegotiating, assume speeds
314 * are as set */
315 if (mii_info->autoneg && mii_info->link) {
316 int speed;
317 status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
318
319#if 0
320 /* If speed and duplex aren't resolved,
321 * return an error. Isn't this handled
322 * by checking aneg?
323 */
324 if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
325 return -EAGAIN;
326#endif
327
328 /* Get the duplexity */
329 if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
330 mii_info->duplex = DUPLEX_FULL;
331 else
332 mii_info->duplex = DUPLEX_HALF;
333
334 /* Get the speed */
335 speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
336 switch(speed) {
337 case MII_M1011_PHY_SPEC_STATUS_1000:
338 mii_info->speed = SPEED_1000;
339 break;
340 case MII_M1011_PHY_SPEC_STATUS_100:
341 mii_info->speed = SPEED_100;
342 break;
343 default:
344 mii_info->speed = SPEED_10;
345 break;
346 }
347 mii_info->pause = 0;
348 }
349
350 return 0;
351}
352
353
354static int cis820x_read_status(struct gfar_mii_info *mii_info)
355{
356 u16 status;
357 int err;
358
359 /* Update the link, but return if there
360 * was an error */
361 err = genmii_update_link(mii_info);
362 if (err)
363 return err;
364
365 /* If the link is up, read the speed and duplex */
366 /* If we aren't autonegotiating, assume speeds
367 * are as set */
368 if (mii_info->autoneg && mii_info->link) {
369 int speed;
370
371 status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
372 if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
373 mii_info->duplex = DUPLEX_FULL;
374 else
375 mii_info->duplex = DUPLEX_HALF;
376
377 speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
378
379 switch (speed) {
380 case MII_CIS8201_AUXCONSTAT_GBIT:
381 mii_info->speed = SPEED_1000;
382 break;
383 case MII_CIS8201_AUXCONSTAT_100:
384 mii_info->speed = SPEED_100;
385 break;
386 default:
387 mii_info->speed = SPEED_10;
388 break;
389 }
390 }
391
392 return 0;
393}
394
395static int marvell_ack_interrupt(struct gfar_mii_info *mii_info)
396{
397 /* Clear the interrupts by reading the reg */
398 phy_read(mii_info, MII_M1011_IEVENT);
399
400 return 0;
401}
402
403static int marvell_config_intr(struct gfar_mii_info *mii_info)
404{
405 if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
406 phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
407 else
408 phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
409
410 return 0;
411}
412
413static int cis820x_init(struct gfar_mii_info *mii_info)
414{
415 phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
416 MII_CIS8201_AUXCONSTAT_INIT);
417 phy_write(mii_info, MII_CIS8201_EXT_CON1,
418 MII_CIS8201_EXTCON1_INIT);
419
420 return 0;
421}
422
423static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info)
424{
425 phy_read(mii_info, MII_CIS8201_ISTAT);
426
427 return 0;
428}
429
430static int cis820x_config_intr(struct gfar_mii_info *mii_info)
431{
432 if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
433 phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
434 else
435 phy_write(mii_info, MII_CIS8201_IMASK, 0);
436
437 return 0;
438}
439
440#define DM9161_DELAY 10
441
442static int dm9161_read_status(struct gfar_mii_info *mii_info)
443{
444 u16 status;
445 int err;
446
447 /* Update the link, but return if there
448 * was an error */
449 err = genmii_update_link(mii_info);
450 if (err)
451 return err;
452
453 /* If the link is up, read the speed and duplex */
454 /* If we aren't autonegotiating, assume speeds
455 * are as set */
456 if (mii_info->autoneg && mii_info->link) {
457 status = phy_read(mii_info, MII_DM9161_SCSR);
458 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
459 mii_info->speed = SPEED_100;
460 else
461 mii_info->speed = SPEED_10;
462
463 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
464 mii_info->duplex = DUPLEX_FULL;
465 else
466 mii_info->duplex = DUPLEX_HALF;
467 }
468
469 return 0;
470}
471
472
473static int dm9161_config_aneg(struct gfar_mii_info *mii_info)
474{
475 struct dm9161_private *priv = mii_info->priv;
476
477 if(0 == priv->resetdone)
478 return -EAGAIN;
479
480 return 0;
481}
482
483static void dm9161_timer(unsigned long data)
484{
485 struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
486 struct dm9161_private *priv = mii_info->priv;
487 u16 status = phy_read(mii_info, MII_BMSR);
488
489 if (status & BMSR_ANEGCOMPLETE) {
490 priv->resetdone = 1;
491 } else
492 mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
493}
494
495static int dm9161_init(struct gfar_mii_info *mii_info)
496{
497 struct dm9161_private *priv;
498
499 /* Allocate the private data structure */
500 priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
501
502 if (NULL == priv)
503 return -ENOMEM;
504
505 mii_info->priv = priv;
506
507 /* Reset is not done yet */
508 priv->resetdone = 0;
509
510 /* Isolate the PHY */
511 phy_write(mii_info, MII_BMCR, BMCR_ISOLATE);
512
513 /* Do not bypass the scrambler/descrambler */
514 phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
515
516 /* Clear 10BTCSR to default */
517 phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
518
519 /* Reconnect the PHY, and enable Autonegotiation */
520 phy_write(mii_info, MII_BMCR, BMCR_ANENABLE);
521
522 /* Start a timer for DM9161_DELAY seconds to wait
523 * for the PHY to be ready */
524 init_timer(&priv->timer);
525 priv->timer.function = &dm9161_timer;
526 priv->timer.data = (unsigned long) mii_info;
527 mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
528
529 return 0;
530}
531
532static void dm9161_close(struct gfar_mii_info *mii_info)
533{
534 struct dm9161_private *priv = mii_info->priv;
535
536 del_timer_sync(&priv->timer);
537 kfree(priv);
538}
539
540#if 0
541static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info)
542{
543 phy_read(mii_info, MII_DM9161_INTR);
544
545 return 0;
546}
547#endif
548
549/* Cicada 820x */
550static struct phy_info phy_info_cis820x = {
551 0x000fc440,
552 "Cicada Cis8204",
553 0x000fffc0,
554 .features = MII_GBIT_FEATURES,
555 .init = &cis820x_init,
556 .config_aneg = &gbit_config_aneg,
557 .read_status = &cis820x_read_status,
558 .ack_interrupt = &cis820x_ack_interrupt,
559 .config_intr = &cis820x_config_intr,
560};
561
562static struct phy_info phy_info_dm9161 = {
563 .phy_id = 0x0181b880,
564 .name = "Davicom DM9161E",
565 .phy_id_mask = 0x0ffffff0,
566 .init = dm9161_init,
567 .config_aneg = dm9161_config_aneg,
568 .read_status = dm9161_read_status,
569 .close = dm9161_close,
570};
571
572static struct phy_info phy_info_marvell = {
573 .phy_id = 0x01410c00,
574 .phy_id_mask = 0xffffff00,
575 .name = "Marvell 88E1101/88E1111",
576 .features = MII_GBIT_FEATURES,
577 .config_aneg = &marvell_config_aneg,
578 .read_status = &marvell_read_status,
579 .ack_interrupt = &marvell_ack_interrupt,
580 .config_intr = &marvell_config_intr,
581};
582
583static struct phy_info phy_info_genmii= {
584 .phy_id = 0x00000000,
585 .phy_id_mask = 0x00000000,
586 .name = "Generic MII",
587 .features = MII_BASIC_FEATURES,
588 .config_aneg = genmii_config_aneg,
589 .read_status = genmii_read_status,
590};
591
592static struct phy_info *phy_info[] = {
593 &phy_info_cis820x,
594 &phy_info_marvell,
595 &phy_info_dm9161,
596 &phy_info_genmii,
597 NULL
598};
599
600u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum)
601{
602 u16 retval;
603 unsigned long flags;
604
605 spin_lock_irqsave(&mii_info->mdio_lock, flags);
606 retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
607 spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
608
609 return retval;
610}
611
612void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val)
613{
614 unsigned long flags;
615
616 spin_lock_irqsave(&mii_info->mdio_lock, flags);
617 mii_info->mdio_write(mii_info->dev,
618 mii_info->mii_id,
619 regnum, val);
620 spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
621}
622
623/* Use the PHY ID registers to determine what type of PHY is attached
624 * to device dev. return a struct phy_info structure describing that PHY
625 */
626struct phy_info * get_phy_info(struct gfar_mii_info *mii_info)
627{
628 u16 phy_reg;
629 u32 phy_ID;
630 int i;
631 struct phy_info *theInfo = NULL;
632 struct net_device *dev = mii_info->dev;
633
634 /* Grab the bits from PHYIR1, and put them in the upper half */
635 phy_reg = phy_read(mii_info, MII_PHYSID1);
636 phy_ID = (phy_reg & 0xffff) << 16;
637
638 /* Grab the bits from PHYIR2, and put them in the lower half */
639 phy_reg = phy_read(mii_info, MII_PHYSID2);
640 phy_ID |= (phy_reg & 0xffff);
641
642 /* loop through all the known PHY types, and find one that */
643 /* matches the ID we read from the PHY. */
644 for (i = 0; phy_info[i]; i++)
645 if (phy_info[i]->phy_id ==
646 (phy_ID & phy_info[i]->phy_id_mask)) {
647 theInfo = phy_info[i];
648 break;
649 }
650
651 /* This shouldn't happen, as we have generic PHY support */
652 if (theInfo == NULL) {
653 printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
654 return NULL;
655 } else {
656 printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
657 phy_ID);
658 }
659
660 return theInfo;
661}
diff --git a/drivers/net/gianfar_phy.h b/drivers/net/gianfar_phy.h
deleted file mode 100644
index 1e9b3abf1e6d..000000000000
--- a/drivers/net/gianfar_phy.h
+++ /dev/null
@@ -1,213 +0,0 @@
1/*
2 * drivers/net/gianfar_phy.h
3 *
4 * Gianfar Ethernet Driver -- PHY handling
5 * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
6 * Based on 8260_io/fcc_enet.c
7 *
8 * Author: Andy Fleming
9 * Maintainer: Kumar Gala (kumar.gala@freescale.com)
10 *
11 * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2 of the License, or (at your
16 * option) any later version.
17 *
18 */
19#ifndef __GIANFAR_PHY_H
20#define __GIANFAR_PHY_H
21
22#define MII_end ((u32)-2)
23#define MII_read ((u32)-1)
24
25#define MIIMIND_BUSY 0x00000001
26#define MIIMIND_NOTVALID 0x00000004
27
28#define GFAR_AN_TIMEOUT 2000
29
30/* 1000BT control (Marvell & BCM54xx at least) */
31#define MII_1000BASETCONTROL 0x09
32#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
33#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
34
35/* Cicada Extended Control Register 1 */
36#define MII_CIS8201_EXT_CON1 0x17
37#define MII_CIS8201_EXTCON1_INIT 0x0000
38
39/* Cicada Interrupt Mask Register */
40#define MII_CIS8201_IMASK 0x19
41#define MII_CIS8201_IMASK_IEN 0x8000
42#define MII_CIS8201_IMASK_SPEED 0x4000
43#define MII_CIS8201_IMASK_LINK 0x2000
44#define MII_CIS8201_IMASK_DUPLEX 0x1000
45#define MII_CIS8201_IMASK_MASK 0xf000
46
47/* Cicada Interrupt Status Register */
48#define MII_CIS8201_ISTAT 0x1a
49#define MII_CIS8201_ISTAT_STATUS 0x8000
50#define MII_CIS8201_ISTAT_SPEED 0x4000
51#define MII_CIS8201_ISTAT_LINK 0x2000
52#define MII_CIS8201_ISTAT_DUPLEX 0x1000
53
54/* Cicada Auxiliary Control/Status Register */
55#define MII_CIS8201_AUX_CONSTAT 0x1c
56#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
57#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
58#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
59#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
60#define MII_CIS8201_AUXCONSTAT_100 0x0008
61
62/* 88E1011 PHY Status Register */
63#define MII_M1011_PHY_SPEC_STATUS 0x11
64#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
65#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
66#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
67#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
68#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
69#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
70
71#define MII_M1011_IEVENT 0x13
72#define MII_M1011_IEVENT_CLEAR 0x0000
73
74#define MII_M1011_IMASK 0x12
75#define MII_M1011_IMASK_INIT 0x6400
76#define MII_M1011_IMASK_CLEAR 0x0000
77
78#define MII_DM9161_SCR 0x10
79#define MII_DM9161_SCR_INIT 0x0610
80
81/* DM9161 Specified Configuration and Status Register */
82#define MII_DM9161_SCSR 0x11
83#define MII_DM9161_SCSR_100F 0x8000
84#define MII_DM9161_SCSR_100H 0x4000
85#define MII_DM9161_SCSR_10F 0x2000
86#define MII_DM9161_SCSR_10H 0x1000
87
88/* DM9161 Interrupt Register */
89#define MII_DM9161_INTR 0x15
90#define MII_DM9161_INTR_PEND 0x8000
91#define MII_DM9161_INTR_DPLX_MASK 0x0800
92#define MII_DM9161_INTR_SPD_MASK 0x0400
93#define MII_DM9161_INTR_LINK_MASK 0x0200
94#define MII_DM9161_INTR_MASK 0x0100
95#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
96#define MII_DM9161_INTR_SPD_CHANGE 0x0008
97#define MII_DM9161_INTR_LINK_CHANGE 0x0004
98#define MII_DM9161_INTR_INIT 0x0000
99#define MII_DM9161_INTR_STOP \
100(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
101 | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
102
103/* DM9161 10BT Configuration/Status */
104#define MII_DM9161_10BTCSR 0x12
105#define MII_DM9161_10BTCSR_INIT 0x7800
106
107#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
108 SUPPORTED_10baseT_Full | \
109 SUPPORTED_100baseT_Half | \
110 SUPPORTED_100baseT_Full | \
111 SUPPORTED_Autoneg | \
112 SUPPORTED_TP | \
113 SUPPORTED_MII)
114
115#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
116 SUPPORTED_1000baseT_Half | \
117 SUPPORTED_1000baseT_Full)
118
119#define MII_READ_COMMAND 0x00000001
120
121#define MII_INTERRUPT_DISABLED 0x0
122#define MII_INTERRUPT_ENABLED 0x1
123/* Taken from mii_if_info and sungem_phy.h */
124struct gfar_mii_info {
125 /* Information about the PHY type */
126 /* And management functions */
127 struct phy_info *phyinfo;
128
129 /* forced speed & duplex (no autoneg)
130 * partner speed & duplex & pause (autoneg)
131 */
132 int speed;
133 int duplex;
134 int pause;
135
136 /* The most recently read link state */
137 int link;
138
139 /* Enabled Interrupts */
140 u32 interrupts;
141
142 u32 advertising;
143 int autoneg;
144 int mii_id;
145
146 /* private data pointer */
147 /* For use by PHYs to maintain extra state */
148 void *priv;
149
150 /* Provided by host chip */
151 struct net_device *dev;
152
153 /* A lock to ensure that only one thing can read/write
154 * the MDIO bus at a time */
155 spinlock_t mdio_lock;
156
157 /* Provided by ethernet driver */
158 int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
159 void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
160};
161
162/* struct phy_info: a structure which defines attributes for a PHY
163 *
164 * id will contain a number which represents the PHY. During
165 * startup, the driver will poll the PHY to find out what its
166 * UID--as defined by registers 2 and 3--is. The 32-bit result
167 * gotten from the PHY will be ANDed with phy_id_mask to
168 * discard any bits which may change based on revision numbers
169 * unimportant to functionality
170 *
171 * There are 6 commands which take a gfar_mii_info structure.
172 * Each PHY must declare config_aneg, and read_status.
173 */
174struct phy_info {
175 u32 phy_id;
176 char *name;
177 unsigned int phy_id_mask;
178 u32 features;
179
180 /* Called to initialize the PHY */
181 int (*init)(struct gfar_mii_info *mii_info);
182
183 /* Called to suspend the PHY for power */
184 int (*suspend)(struct gfar_mii_info *mii_info);
185
186 /* Reconfigures autonegotiation (or disables it) */
187 int (*config_aneg)(struct gfar_mii_info *mii_info);
188
189 /* Determines the negotiated speed and duplex */
190 int (*read_status)(struct gfar_mii_info *mii_info);
191
192 /* Clears any pending interrupts */
193 int (*ack_interrupt)(struct gfar_mii_info *mii_info);
194
195 /* Enables or disables interrupts */
196 int (*config_intr)(struct gfar_mii_info *mii_info);
197
198 /* Clears up any memory if needed */
199 void (*close)(struct gfar_mii_info *mii_info);
200};
201
202struct phy_info *get_phy_info(struct gfar_mii_info *mii_info);
203int read_phy_reg(struct net_device *dev, int mii_id, int regnum);
204void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value);
205void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info);
206void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts);
207
208struct dm9161_private {
209 struct timer_list timer;
210 int resetdone;
211};
212
213#endif /* GIANFAR_PHY_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-21 08:43:17 -0400