176 files changed, 13128 insertions, 5362 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9d02cdb15b23..65bf774a26fd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -253,6 +253,14 @@ config ARCH_CLPS711X
         help
           Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_GEMINI
+        bool "Cortina Systems Gemini"
+        select CPU_FA526
+        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+        help
+          Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_EBSA110
         bool "EBSA-110"
         select CPU_SA110
@@ -277,14 +285,6 @@ config ARCH_EP93XX
         help
           This enables support for the Cirrus EP93xx series of CPUs.
 
-config ARCH_GEMINI
-        bool "Cortina Systems Gemini"
-        select CPU_FA526
-        select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-        help
-          Support for the Cortina Systems Gemini family SoCs
-
 config ARCH_FOOTBRIDGE
         bool "FootBridge"
         select CPU_SA110
@@ -293,6 +293,17 @@ config ARCH_FOOTBRIDGE
           Support for systems based on the DC21285 companion chip
           ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
+config ARCH_MXC
+        bool "Freescale MXC/iMX-based"
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select ARCH_MTD_XIP
+        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+        select HAVE_CLK
+        help
+          Support for Freescale MXC/iMX-based family of processors
+
 config ARCH_NETX
         bool "Hilscher NetX based"
         select CPU_ARM926T
@@ -309,15 +320,6 @@ config ARCH_H720X
         help
           This enables support for systems based on the Hynix HMS720x
 
-config ARCH_IMX
-        bool "IMX"
-        select CPU_ARM920T
-        select GENERIC_GPIO
-        select GENERIC_TIME
-        select GENERIC_CLOCKEVENTS
-        help
-          Support for Motorola's i.MX family of processors (MX1, MXL).
-
 config ARCH_IOP13XX
         bool "IOP13xx-based"
         depends on MMU
@@ -405,28 +407,6 @@ config ARCH_KIRKWOOD
           Support for the following Marvell Kirkwood series SoCs:
           88F6180, 88F6192 and 88F6281.
 
-config ARCH_KS8695
-        bool "Micrel/Kendin KS8695"
-        select CPU_ARM922T
-        select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-        help
-          Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-          System-on-Chip devices.
-
-config ARCH_NS9XXX
-        bool "NetSilicon NS9xxx"
-        select CPU_ARM926T
-        select GENERIC_GPIO
-        select GENERIC_TIME
-        select GENERIC_CLOCKEVENTS
-        select HAVE_CLK
-        help
-          Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-          System.
-
-          <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_LOKI
         bool "Marvell Loki (88RC8480)"
         select CPU_FEROCEON
@@ -448,17 +428,6 @@ config ARCH_MV78XX0
           Support for the following Marvell MV78xx0 series SoCs:
           MV781x0, MV782x0.
 
-config ARCH_MXC
-        bool "Freescale MXC/iMX-based"
-        select GENERIC_TIME
-        select GENERIC_CLOCKEVENTS
-        select ARCH_MTD_XIP
-        select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-        select HAVE_CLK
-        help
-          Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_ORION5X
         bool "Marvell Orion"
         depends on MMU
@@ -473,6 +442,49 @@ config ARCH_ORION5X
           Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
           Orion-2 (5281), Orion-1-90 (6183).
 
+config ARCH_MMP
+        bool "Marvell PXA168/910"
+        depends on MMU
+        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+        select HAVE_CLK
+        select COMMON_CLKDEV
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select TICK_ONESHOT
+        select PLAT_PXA
+        help
+          Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+        bool "Micrel/Kendin KS8695"
+        select CPU_ARM922T
+        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+        help
+          Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+          System-on-Chip devices.
+
+config ARCH_NS9XXX
+        bool "NetSilicon NS9xxx"
+        select CPU_ARM926T
+        select GENERIC_GPIO
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select HAVE_CLK
+        help
+          Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+          System.
+
+          <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+        bool "Nuvoton W90X900 CPU"
+        select CPU_ARM926T
+        help
+                Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+                can login www.mcuos.com or www.nuvoton.com to know more.
+
 config ARCH_PNX4008
         bool "Philips Nexperia PNX4008 Mobile"
         select CPU_ARM926T
@@ -495,19 +507,16 @@ config ARCH_PXA
         help
           Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MMP
-        bool "Marvell PXA168/910"
-        depends on MMU
-        select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-        select HAVE_CLK
-        select COMMON_CLKDEV
+config ARCH_MSM
+        bool "Qualcomm MSM"
+        select CPU_V6
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
-        select TICK_ONESHOT
-        select PLAT_PXA
         help
-          Support for Marvell's PXA168/910 processor line.
+          Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+          apps processor of the MSM7K and depends on a shared memory
+          interface to the ARM9 modem processor which runs the baseband stack
+          and controls some vital subsystems (clock and power control, etc).
 
 config ARCH_RPC
         bool "RiscPC"
@@ -587,6 +596,7 @@ config ARCH_DAVINCI
         select ZONE_DMA
         select HAVE_IDE
         select COMMON_CLKDEV
+        select GENERIC_ALLOCATOR
         help
           Support for TI's DaVinci platform.
 
@@ -600,24 +610,6 @@ config ARCH_OMAP
         help
           Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM
-        bool "Qualcomm MSM"
-        select CPU_V6
-        select GENERIC_TIME
-        select GENERIC_CLOCKEVENTS
-        help
-          Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-          apps processor of the MSM7K and depends on a shared memory
-          interface to the ARM9 modem processor which runs the baseband stack
-          and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
-        bool "Nuvoton W90X900 CPU"
-        select CPU_ARM926T
-        help
-                Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-                can login www.mcuos.com or www.nuvoton.com to know more.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -683,8 +675,6 @@ endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
-
 source "arch/arm/mach-h720x/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
@@ -1022,7 +1012,7 @@ source "mm/Kconfig"
 config LEDS
         bool "Timer and CPU usage LEDs"
         depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-                   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+                   ARCH_EBSA285 || ARCH_INTEGRATOR || \
                    ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                    ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
                    ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
@@ -1188,7 +1178,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1213,14 +1203,11 @@ config CPU_FREQ_INTEGRATOR
 
           If in doubt, say Y.
 
-config CPU_FREQ_IMX
-        tristate "CPUfreq driver for i.MX CPUs"
-        depends on ARCH_IMX && CPU_FREQ
-        default n
-        help
-          This enables the CPUfreq driver for i.MX CPUs.
-
-          If in doubt, say N.
+config CPU_FREQ_PXA
+        bool
+        depends on CPU_FREQ && ARCH_PXA && PXA25x
+        default y
+        select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 endif
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 676d10d028b5..e8ab87750e9b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -99,65 +99,69 @@ CHECKFLAGS	+= -D__arm__
 #Default value
 head-y          := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y       := 0x00008000
-
- machine-$(CONFIG_ARCH_RPC)        := rpc
- machine-$(CONFIG_ARCH_EBSA110)    := ebsa110
- machine-$(CONFIG_FOOTBRIDGE)      := footbridge
- machine-$(CONFIG_ARCH_SHARK)      := shark
- machine-$(CONFIG_ARCH_SA1100)     := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111)          := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
 endif
- machine-$(CONFIG_ARCH_PXA)        := pxa
- machine-$(CONFIG_ARCH_MMP)        := mmp
-    plat-$(CONFIG_PLAT_PXA)        := pxa
- machine-$(CONFIG_ARCH_L7200)      := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI)     := gemini
- textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP32X)     := iop32x
- machine-$(CONFIG_ARCH_IOP33X)     := iop33x
- machine-$(CONFIG_ARCH_IOP13XX)    := iop13xx
-    plat-$(CONFIG_PLAT_IOP)        := iop
- machine-$(CONFIG_ARCH_IXP4XX)     := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1)      := omap1
- machine-$(CONFIG_ARCH_OMAP2)      := omap2
- machine-$(CONFIG_ARCH_OMAP3)      := omap2
- machine-$(CONFIG_ARCH_OMAP4)      := omap2
-    plat-$(CONFIG_ARCH_OMAP)       := omap
- machine-$(CONFIG_ARCH_S3C2410)    := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0)    := s3c24a0
-    plat-$(CONFIG_PLAT_S3C24XX)    := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX)    := s3c6400 s3c6410
-    plat-$(CONFIG_PLAT_S3C64XX)    := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X)    := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE)  := versatile
- machine-$(CONFIG_ARCH_IMX)        := imx
- machine-$(CONFIG_ARCH_H720X)      := h720x
- machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)       := at91
- machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
- machine-$(CONFIG_ARCH_NETX)       := netx
- machine-$(CONFIG_ARCH_NS9XXX)     := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI)    := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
- machine-$(CONFIG_ARCH_KS8695)     := ks8695
-    plat-$(CONFIG_ARCH_MXC)        := mxc
- machine-$(CONFIG_ARCH_MX2)        := mx2
- machine-$(CONFIG_ARCH_MX3)        := mx3
- machine-$(CONFIG_ARCH_MX1)        := mx1
- machine-$(CONFIG_ARCH_ORION5X)    := orion5x
-    plat-$(CONFIG_PLAT_ORION)      := orion
- machine-$(CONFIG_ARCH_MSM)        := msm
- machine-$(CONFIG_ARCH_LOKI)       := loki
- machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- machine-$(CONFIG_ARCH_W90X900)    := w90x900
+
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000)         := aaec2000
+machine-$(CONFIG_ARCH_AT91)             := at91
+machine-$(CONFIG_ARCH_CLPS711X)         := clps711x
+machine-$(CONFIG_ARCH_DAVINCI)          := davinci
+machine-$(CONFIG_ARCH_EBSA110)          := ebsa110
+machine-$(CONFIG_ARCH_EP93XX)           := ep93xx
+machine-$(CONFIG_ARCH_GEMINI)           := gemini
+machine-$(CONFIG_ARCH_H720X)            := h720x
+machine-$(CONFIG_ARCH_INTEGRATOR)       := integrator
+machine-$(CONFIG_ARCH_IOP13XX)          := iop13xx
+machine-$(CONFIG_ARCH_IOP32X)           := iop32x
+machine-$(CONFIG_ARCH_IOP33X)           := iop33x
+machine-$(CONFIG_ARCH_IXP2000)          := ixp2000
+machine-$(CONFIG_ARCH_IXP23XX)          := ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX)           := ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)         := kirkwood
+machine-$(CONFIG_ARCH_KS8695)           := ks8695
+machine-$(CONFIG_ARCH_L7200)            := l7200
+machine-$(CONFIG_ARCH_LH7A40X)          := lh7a40x
+machine-$(CONFIG_ARCH_LOKI)             := loki
+machine-$(CONFIG_ARCH_MMP)              := mmp
+machine-$(CONFIG_ARCH_MSM)              := msm
+machine-$(CONFIG_ARCH_MV78XX0)          := mv78xx0
+machine-$(CONFIG_ARCH_MX1)              := mx1
+machine-$(CONFIG_ARCH_MX2)              := mx2
+machine-$(CONFIG_ARCH_MX3)              := mx3
+machine-$(CONFIG_ARCH_NETX)             := netx
+machine-$(CONFIG_ARCH_NS9XXX)           := ns9xxx
+machine-$(CONFIG_ARCH_OMAP1)            := omap1
+machine-$(CONFIG_ARCH_OMAP2)            := omap2
+machine-$(CONFIG_ARCH_OMAP3)            := omap2
+machine-$(CONFIG_ARCH_OMAP4)            := omap2
+machine-$(CONFIG_ARCH_ORION5X)          := orion5x
+machine-$(CONFIG_ARCH_PNX4008)          := pnx4008
+machine-$(CONFIG_ARCH_PXA)              := pxa
+machine-$(CONFIG_ARCH_REALVIEW)         := realview
+machine-$(CONFIG_ARCH_RPC)              := rpc
+machine-$(CONFIG_ARCH_S3C2410)          := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0)          := s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX)          := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100)           := sa1100
+machine-$(CONFIG_ARCH_SHARK)            := shark
+machine-$(CONFIG_ARCH_VERSATILE)        := versatile
+machine-$(CONFIG_ARCH_W90X900)          := w90x900
+machine-$(CONFIG_FOOTBRIDGE)            := footbridge
+
+# Platform directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC)         := mxc
+plat-$(CONFIG_ARCH_OMAP)        := omap
+plat-$(CONFIG_PLAT_IOP)         := iop
+plat-$(CONFIG_PLAT_ORION)       := orion
+plat-$(CONFIG_PLAT_PXA)         := pxa
+plat-$(CONFIG_PLAT_S3C24XX)     := s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX)     := s3c64xx s3c
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index eb2738b5be5f..ac18662f38cc 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
 
 #
 # TI DaVinci Implementations
@@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y
 # DaVinci Core Type
 #
 CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
 
 #
 # DaVinci Board Type
 #
 CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
new file mode 100644
index 000000000000..4b04290d8e81
--- /dev/null
+++ b/arch/arm/configs/mx21_defconfig
@@ -0,0 +1,1170 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 58cf91f38e6f..742c2aaeb020 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,14 @@ struct map_desc {
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+                        const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)   do { } while (0)
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 110295c5461d..1cd2d6416bda 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
         return __va(ptr);
 }
 
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd)           pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
 /*
  * Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e4345106ee57..bac578fe0d3d 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
 #define clk_is_sys(x)           ((x)->type & CLK_TYPE_SYSTEM)
 
 
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi()          (  cpu_is_at91cap9() \
+                                || cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla()     (cpu_is_at91sam9g20())
+
+#define cpu_has_pllb()          (!cpu_is_at91sam9rl())
+
+#define cpu_has_upll()          (0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp()           (!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs()         (!cpu_is_at91sam9rl())
+
+
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
 
@@ -140,7 +159,7 @@ static struct clk utmi_clk = {
 };
 static struct clk uhpck = {
         .name           = "uhpck",
-        .parent         = &pllb,
+        /*.parent               = ... we choose parent at runtime */
         .mode           = pmc_sys_mode,
 };
 
@@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
                 case AT91_PMC_CSS_PLLA:
                         return &plla;
                 case AT91_PMC_CSS_PLLB:
-                        return &pllb;
+                        if (cpu_has_upll())
+                                /* CSS_PLLB == CSS_UPLL */
+                                return &utmi_clk;
+                        else if (cpu_has_pllb())
+                                return &pllb;
         }
 
         return NULL;
@@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
                         u32     pckr;
 
                         pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-                        pckr &= AT91_PMC_CSS_PLLB;      /* clock selection */
+                        pckr &= AT91_PMC_CSS;   /* clock selection */
                         pckr |= prescale << 2;
                         at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
                         clk->rate_hz = actual;
@@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
 static void __init init_programmable_clock(struct clk *clk)
 {
         struct clk      *parent;
@@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused)
         seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
         seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
         seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-        if (!cpu_is_at91sam9rl())
+        if (cpu_has_pllb())
                 seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-        if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+        if (cpu_has_utmi())
                 seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
         seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+        if (cpu_has_upll())
+                seq_printf(s, "USB  = %8x\n", at91_sys_read(AT91_PMC_USB));
         seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
         seq_printf(s, "\n");
@@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = {
         &clk32k,
         &main_clk,
         &plla,
-        &pllb,
-
-        /* PLLB children (USB) */
-        &udpck,
-        &uhpck,
 
         /* MCK */
         &mck
 };
 
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+        /*
+         * USB clock init:  choose 48 MHz PLLB value,
+         * disable 48MHz clock during usb peripheral suspend.
+         *
+         * REVISIT:  assumes MCK doesn't derive from PLLB!
+         */
+        uhpck.parent = &pllb;
+
+        at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+        pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+        if (cpu_is_at91rm9200()) {
+                uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+                udpck.pmc_mask = AT91RM9200_PMC_UDP;
+                at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+        } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+                uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+                udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+        } else if (cpu_is_at91cap9()) {
+                uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+        }
+        at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+        udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+        uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+        /*
+         * USB clock init: choose 480 MHz from UPLL,
+         */
+        unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+        /* Setup divider by 10 to reach 48 MHz */
+        usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+        at91_sys_write(AT91_PMC_USB, usbr);
+
+        /* Now set uhpck values */
+        uhpck.parent = &utmi_clk;
+        uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+        uhpck.rate_hz = utmi_clk.parent->rate_hz;
+        uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
 int __init at91_clock_init(unsigned long main_clock)
 {
         unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock)
 
         /* report if PLLA is more than mildly overclocked */
         plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-        if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
-           || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+        if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+           || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
                 pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
-        /*
-         * USB clock init:  choose 48 MHz PLLB value,
-         * disable 48MHz clock during usb peripheral suspend.
-         *
-         * REVISIT:  assumes MCK doesn't derive from PLLB!
-         */
-        at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
-        pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-        if (cpu_is_at91rm9200()) {
-                uhpck.pmc_mask = AT91RM9200_PMC_UHP;
-                udpck.pmc_mask = AT91RM9200_PMC_UDP;
-                at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-        } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
-                uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-                udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-        } else if (cpu_is_at91cap9()) {
-                uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+        if (cpu_has_upll() && !cpu_has_pllb()) {
+                /* setup UTMI clock as the fourth primary clock
+                 * (instead of pllb) */
+                utmi_clk.type |= CLK_TYPE_PRIMARY;
+                utmi_clk.id = 3;
         }
-        at91_sys_write(AT91_CKGR_PLLBR, 0);
 
-        udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-        uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
         /*
          * USB HS clock init
          */
-        if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+        if (cpu_has_utmi())
                 /*
                  * multiplier is hard-wired to 40
                  * (obtain the USB High Speed 480 MHz when input is 12 MHz)
                  */
                 utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-        }
+
+        /*
+         * USB FS clock init
+         */
+        if (cpu_has_pllb())
+                at91_pllb_usbfs_clock_init(main_clock);
+        if (cpu_has_upll())
+                /* assumes that we choose UPLL for USB and not PLLA */
+                at91_upll_usbfs_clock_init(main_clock);
 
         /*
          * MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock)
         mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
         freq = mck.parent->rate_hz;
         freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));                           /* prescale */
-        if (cpu_is_at91rm9200())
+        if (cpu_is_at91rm9200()) {
                 mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));       /* mdiv */
-        else if (cpu_is_at91sam9g20()) {
+        } else if (cpu_is_at91sam9g20()) {
                 mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
                         freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;    /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
                 if (mckr & AT91_PMC_PDIV)
                         freq /= 2;              /* processor clock division */
-        } else
+        } else {
                 mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
+        }
 
         /* Register the PMC's standard clocks */
         for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
                 list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
-        if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+        if (cpu_has_pllb())
+                list_add_tail(&pllb.node, &clocks);
+
+        if (cpu_has_uhp())
+                list_add_tail(&uhpck.node, &clocks);
+
+        if (cpu_has_udpfs())
+                list_add_tail(&udpck.node, &clocks);
+
+        if (cpu_has_utmi())
                 list_add_tail(&utmi_clk.node, &clocks);
 
         /* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33b8a9a..64589eaaaee8 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
 #define         AT91_PMC_PCK            (1 <<  0)               /* Processor Clock */
 #define         AT91RM9200_PMC_UDP      (1 <<  1)               /* USB Devcice Port Clock [AT91RM9200 only] */
 #define         AT91RM9200_PMC_MCKUDP   (1 <<  2)               /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define         AT91CAP9_PMC_DDR        (1 <<  2)               /* DDR Clock [AT91CAP9 revC only] */
+#define         AT91CAP9_PMC_DDR        (1 <<  2)               /* DDR Clock [CAP9 revC & some SAM9 only] */
 #define         AT91RM9200_PMC_UHP      (1 <<  4)               /* USB Host Port Clock [AT91RM9200 only] */
 #define         AT91SAM926x_PMC_UHP     (1 <<  6)               /* USB Host Port Clock [AT91SAM926x only] */
 #define         AT91CAP9_PMC_UHP        (1 <<  6)               /* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
 #define AT91_PMC_PCDR           (AT91_PMC + 0x14)       /* Peripheral Clock Disable Register */
 #define AT91_PMC_PCSR           (AT91_PMC + 0x18)       /* Peripheral Clock Status Register */
 
-#define AT91_CKGR_UCKR          (AT91_PMC + 0x1C)       /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_CKGR_UCKR          (AT91_PMC + 0x1C)       /* UTMI Clock Register [some SAM9, CAP9] */
 #define         AT91_PMC_UPLLEN         (1   << 16)             /* UTMI PLL Enable */
 #define         AT91_PMC_UPLLCOUNT      (0xf << 20)             /* UTMI PLL Start-up Time */
 #define         AT91_PMC_BIASEN         (1   << 24)             /* UTMI BIAS Enable */
-#define         AT91_PMC_BIASCOUNT      (0xf << 28)             /* UTMI PLL Start-up Time */
+#define         AT91_PMC_BIASCOUNT      (0xf << 28)             /* UTMI BIAS Start-up Time */
 
 #define AT91_CKGR_MOR           (AT91_PMC + 0x20)       /* Main Oscillator Register [not on SAM9RL] */
 #define         AT91_PMC_MOSCEN         (1    << 0)             /* Main Oscillator Enable */
@@ -72,6 +72,7 @@
 #define                 AT91_PMC_CSS_MAIN               (1 << 0)
 #define                 AT91_PMC_CSS_PLLA               (2 << 0)
 #define                 AT91_PMC_CSS_PLLB               (3 << 0)
+#define                 AT91_PMC_CSS_UPLL               (3 << 0)        /* [some SAM9 only] */
 #define         AT91_PMC_PRES           (7 <<  2)               /* Master Clock Prescaler */
 #define                 AT91_PMC_PRES_1                 (0 << 2)
 #define                 AT91_PMC_PRES_2                 (1 << 2)
@@ -88,12 +89,25 @@
 #define                 AT91SAM9_PMC_MDIV_1             (0 << 8)        /* [SAM9,CAP9 only] */
 #define                 AT91SAM9_PMC_MDIV_2             (1 << 8)
 #define                 AT91SAM9_PMC_MDIV_4             (2 << 8)
-#define                 AT91SAM9_PMC_MDIV_6             (3 << 8)
+#define                 AT91SAM9_PMC_MDIV_6             (3 << 8)        /* [some SAM9 only] */
+#define                 AT91SAM9_PMC_MDIV_3             (3 << 8)        /* [some SAM9 only] */
 #define         AT91_PMC_PDIV           (1 << 12)               /* Processor Clock Division [some SAM9 only] */
 #define                 AT91_PMC_PDIV_1                 (0 << 12)
 #define                 AT91_PMC_PDIV_2                 (1 << 12)
+#define         AT91_PMC_PLLADIV2       (1 << 12)               /* PLLA divisor by 2 [some SAM9 only] */
+#define                 AT91_PMC_PLLADIV2_OFF           (0 << 12)
+#define                 AT91_PMC_PLLADIV2_ON            (1 << 12)
 
-#define AT91_PMC_PCKR(n)        (AT91_PMC + 0x40 + ((n) * 4))   /* Programmable Clock 0-3 Registers */
+#define AT91_PMC_USB            (AT91_PMC + 0x38)       /* USB Clock Register [some SAM9 only] */
+#define         AT91_PMC_USBS           (0x1 <<  0)             /* USB OHCI Input clock selection */
+#define                 AT91_PMC_USBS_PLLA              (0 << 0)
+#define                 AT91_PMC_USBS_UPLL              (1 << 0)
+#define         AT91_PMC_OHCIUSBDIV     (0xF <<  8)             /* Divider for USB OHCI Clock */
+
+#define AT91_PMC_PCKR(n)        (AT91_PMC + 0x40 + ((n) * 4))   /* Programmable Clock 0-N Registers */
+#define         AT91_PMC_CSSMCK         (0x1 <<  8)             /* CSS or Master Clock Selection */
+#define                 AT91_PMC_CSSMCK_CSS             (0 << 8)
+#define                 AT91_PMC_CSSMCK_MCK             (1 << 8)
 
 #define AT91_PMC_IER            (AT91_PMC + 0x60)       /* Interrupt Enable Register */
 #define AT91_PMC_IDR            (AT91_PMC + 0x64)       /* Interrupt Disable Register */
@@ -102,7 +116,7 @@
 #define         AT91_PMC_LOCKA          (1 <<  1)               /* PLLA Lock */
 #define         AT91_PMC_LOCKB          (1 <<  2)               /* PLLB Lock */
 #define         AT91_PMC_MCKRDY         (1 <<  3)               /* Master Clock */
-#define         AT91_PMC_LOCKU          (1 <<  6)               /* UPLL Lock [AT91CAP9 only] */
+#define         AT91_PMC_LOCKU          (1 <<  6)               /* UPLL Lock [some SAM9, AT91CAP9 only] */
 #define         AT91_PMC_OSCSEL         (1 <<  7)               /* Slow Clock Oscillator [AT91CAP9 revC only] */
 #define         AT91_PMC_PCK0RDY        (1 <<  8)               /* Programmable Clock 0 */
 #define         AT91_PMC_PCK1RDY        (1 <<  9)               /* Programmable Clock 1 */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a9c78bc72b84..76408670554d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -1,11 +1,26 @@
 if ARCH_DAVINCI
 
+config AINTC
+        bool
+
+config CP_INTC
+        bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
 config ARCH_DAVINCI_DM644x
         bool "DaVinci 644x based system"
+        select AINTC
+
+config ARCH_DAVINCI_DM355
+        bool "DaVinci 355 based system"
+        select AINTC
+
+config ARCH_DAVINCI_DM646x
+        bool "DaVinci 646x based system"
+        select AINTC
 
 comment "DaVinci Board Type"
 
@@ -17,6 +32,38 @@ config MACH_DAVINCI_EVM
           Configure this option to specify the whether the board used
           for development is a DM644x EVM
 
+config MACH_SFFSDR
+        bool "Lyrtech SFFSDR"
+        default n
+        depends on ARCH_DAVINCI_DM644x
+        help
+          Say Y here to select the Lyrtech Small Form Factor
+          Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+        bool "TI DM355 EVM"
+        default n
+        depends on ARCH_DAVINCI_DM355
+        help
+          Configure this option to specify the whether the board used
+          for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+        bool "DM355 Leopard board"
+        default n
+        depends on ARCH_DAVINCI_DM355
+        help
+          Configure this option to specify the whether the board used
+          for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+        bool "TI DM6467 EVM"
+        default n
+        depends on ARCH_DAVINCI_DM646x
+        help
+          Configure this option to specify the whether the board used
+          for development is a DM6467 EVM
+
 
 config DAVINCI_MUX
         bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 1674661942f3..059ab78084ba 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,13 +4,22 @@
 #
 
 # Common objects
-obj-y                   := time.o irq.o clock.o serial.o io.o id.o psc.o \
-                           gpio.o devices.o dma.o usb.o
+obj-y                   := time.o clock.o serial.o io.o psc.o \
+                           gpio.o devices.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)               += mux.o
 
 # Chip specific
 obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+
+obj-$(CONFIG_AINTC)                     += irq.o
+obj-$(CONFIG_CP_INTC)                   += cp_intc.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)          += board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR)               += board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)    += board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD)        += board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)   += board-dm646x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 000000000000..5ac2f565d860
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,298 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE         0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE        0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE         SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+        {
+                /* UBL (a few copies) plus U-Boot */
+                .name           = "bootloader",
+                .offset         = 0,
+                .size           = 15 * NAND_BLOCK_SIZE,
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        }, {
+                /* U-Boot environment */
+                .name           = "params",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 1 * NAND_BLOCK_SIZE,
+                .mask_flags     = 0,
+        }, {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = SZ_4M,
+                .mask_flags     = 0,
+        }, {
+                .name           = "filesystem1",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = SZ_512M,
+                .mask_flags     = 0,
+        }, {
+                .name           = "filesystem2",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+                .mask_flags     = 0,
+        }
+        /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+        .mask_chipsel           = BIT(14),
+        .parts                  = davinci_nand_partitions,
+        .nr_parts               = ARRAY_SIZE(davinci_nand_partitions),
+        .ecc_mode               = NAND_ECC_HW_SYNDROME,
+        .options                = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+        {
+                .start          = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+                .end            = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+                .end            = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device davinci_nand_device = {
+        .name                   = "davinci_nand",
+        .id                     = 0,
+
+        .num_resources          = ARRAY_SIZE(davinci_nand_resources),
+        .resource               = davinci_nand_resources,
+
+        .dev                    = {
+                .platform_data  = &davinci_nand_data,
+        },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+        .bus_freq       = 400   /* kHz */,
+        .bus_delay      = 0     /* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+        gpio_request(gpio + 0, "mmc0_ro");
+        gpio_request(gpio + 1, "mmc0_cd");
+        gpio_request(gpio + 2, "mmc1_ro");
+        gpio_request(gpio + 3, "mmc1_cd");
+
+        /* we "know" these are input-only so we don't
+         * need to call gpio_direction_input()
+         */
+
+        dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+        { I2C_BOARD_INFO("dm355evm_msp", 0x25),
+                .platform_data = dm355evm_mmcsd_gpios,
+                /* plus irq */ },
+        /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+        /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+        davinci_init_i2c(&i2c_pdata);
+
+        gpio_request(5, "dm355evm_msp");
+        gpio_direction_input(5);
+        dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+        i2c_register_board_info(1, dm355evm_i2c_info,
+                        ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+        {
+                /* addr */
+                .start  = 0x04014000,
+                .end    = 0x04014001,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                /* data */
+                .start  = 0x04014002,
+                .end    = 0x04014003,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ
+                        | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+        },
+};
+
+static struct platform_device dm355evm_dm9000 = {
+        .name           = "dm9000",
+        .id             = -1,
+        .resource       = dm355evm_dm9000_rsrc,
+        .num_resources  = ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+        &dm355evm_dm9000,
+        &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+        .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+        dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+        if (!gpio_is_valid(dm355evm_mmc_gpios))
+                return -ENXIO;
+        /* low == card present */
+        return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+        if (!gpio_is_valid(dm355evm_mmc_gpios))
+                return -ENXIO;
+        /* high == card's write protect switch active */
+        return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+        .get_cd         = dm355evm_mmc_get_cd,
+        .get_ro         = dm355evm_mmc_get_ro,
+        .wires          = 4,
+        .max_freq       = 50000000,
+        .caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+        .version        = MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE    0       /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE    1       /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+        .byte_len       = SZ_64K / 8,
+        .name           = "at25640a",
+        .page_size      = 32,
+        .flags          = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+        {
+                .modalias       = "at25",
+                .platform_data  = &at25640a,
+                .max_speed_hz   = 10 * 1000 * 1000,     /* at 3v3 */
+                .bus_num        = 0,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,
+        },
+};
+
+static __init void dm355_evm_init(void)
+{
+        struct clk *aemif;
+
+        gpio_request(1, "dm9000");
+        gpio_direction_input(1);
+        dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+        aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+        if (IS_ERR(aemif))
+                WARN("%s: unable to get AEMIF clock\n", __func__);
+        else
+                clk_enable(aemif);
+
+        platform_add_devices(davinci_evm_devices,
+                             ARRAY_SIZE(davinci_evm_devices));
+        evm_init_i2c();
+        davinci_serial_init(&uart_config);
+
+        /* NOTE:  NAND flash timings set by the UBL are slower than
+         * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+         * but could be 0x0400008c for about 25% faster page reads.
+         */
+
+        gpio_request(2, "usb_id_toggle");
+        gpio_direction_output(2, USB_ID_VALUE);
+        /* irlml6401 switches over 1A in under 8 msec */
+        setup_usb(500, 8);
+
+        davinci_setup_mmc(0, &dm355evm_mmc_config);
+        davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+        dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+                        ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+        davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+        .phys_io      = IO_PHYS,
+        .io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+        .boot_params  = (0x80000100),
+        .map_io       = dm355_evm_map_io,
+        .init_irq     = dm355_evm_irq_init,
+        .timer        = &davinci_timer,
+        .init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 000000000000..28c9008df4f4
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,296 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE         0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE        0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE         SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+        {
+                /* UBL (a few copies) plus U-Boot */
+                .name           = "bootloader",
+                .offset         = 0,
+                .size           = 15 * NAND_BLOCK_SIZE,
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        }, {
+                /* U-Boot environment */
+                .name           = "params",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 1 * NAND_BLOCK_SIZE,
+                .mask_flags     = 0,
+        }, {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = SZ_4M,
+                .mask_flags     = 0,
+        }, {
+                .name           = "filesystem1",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = SZ_512M,
+                .mask_flags     = 0,
+        }, {
+                .name           = "filesystem2",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+                .mask_flags     = 0,
+        }
+        /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+        .mask_chipsel           = BIT(14),
+        .parts                  = davinci_nand_partitions,
+        .nr_parts               = ARRAY_SIZE(davinci_nand_partitions),
+        .ecc_mode               = NAND_ECC_HW_SYNDROME,
+        .options                = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+        {
+                .start          = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+                .end            = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+                .end            = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device davinci_nand_device = {
+        .name                   = "davinci_nand",
+        .id                     = 0,
+
+        .num_resources          = ARRAY_SIZE(davinci_nand_resources),
+        .resource               = davinci_nand_resources,
+
+        .dev                    = {
+                .platform_data  = &davinci_nand_data,
+        },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+        .bus_freq       = 400   /* kHz */,
+        .bus_delay      = 0     /* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+        gpio_request(gpio + 0, "mmc0_ro");
+        gpio_request(gpio + 1, "mmc0_cd");
+        gpio_request(gpio + 2, "mmc1_ro");
+        gpio_request(gpio + 3, "mmc1_cd");
+
+        /* we "know" these are input-only so we don't
+         * need to call gpio_direction_input()
+         */
+
+        leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+        { I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+                .platform_data = dm355leopard_mmcsd_gpios,
+                /* plus irq */ },
+        /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+        /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+        davinci_init_i2c(&i2c_pdata);
+
+        gpio_request(5, "dm355leopard_msp");
+        gpio_direction_input(5);
+        dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+        i2c_register_board_info(1, dm355leopard_i2c_info,
+                        ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+        {
+                /* addr */
+                .start  = 0x04000000,
+                .end    = 0x04000001,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                /* data */
+                .start  = 0x04000016,
+                .end    = 0x04000017,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ
+                        | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+        },
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+        .name           = "dm9000",
+        .id             = -1,
+        .resource       = dm355leopard_dm9000_rsrc,
+        .num_resources  = ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+        &dm355leopard_dm9000,
+        &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+        .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+        dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+        if (!gpio_is_valid(leopard_mmc_gpio))
+                return -ENXIO;
+        /* low == card present */
+        return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+        if (!gpio_is_valid(leopard_mmc_gpio))
+                return -ENXIO;
+        /* high == card's write protect switch active */
+        return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+        .get_cd         = dm355leopard_mmc_get_cd,
+        .get_ro         = dm355leopard_mmc_get_ro,
+        .wires          = 4,
+        .max_freq       = 50000000,
+        .caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE    0       /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE    1       /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+        .byte_len       = SZ_64K / 8,
+        .name           = "at25640a",
+        .page_size      = 32,
+        .flags          = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+        {
+                .modalias       = "at25",
+                .platform_data  = &at25640a,
+                .max_speed_hz   = 10 * 1000 * 1000,     /* at 3v3 */
+                .bus_num        = 0,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,
+        },
+};
+
+static __init void dm355_leopard_init(void)
+{
+        struct clk *aemif;
+
+        gpio_request(9, "dm9000");
+        gpio_direction_input(9);
+        dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+        aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+        if (IS_ERR(aemif))
+                WARN("%s: unable to get AEMIF clock\n", __func__);
+        else
+                clk_enable(aemif);
+
+        platform_add_devices(davinci_leopard_devices,
+                             ARRAY_SIZE(davinci_leopard_devices));
+        leopard_init_i2c();
+        davinci_serial_init(&uart_config);
+
+        /* NOTE:  NAND flash timings set by the UBL are slower than
+         * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+         * but could be 0x0400008c for about 25% faster page reads.
+         */
+
+        gpio_request(2, "usb_id_toggle");
+        gpio_direction_output(2, USB_ID_VALUE);
+        /* irlml6401 switches over 1A in under 8 msec */
+        setup_usb(500, 8);
+
+        davinci_setup_mmc(0, &dm355leopard_mmc_config);
+        davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+        dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+                        ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+        davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+        .phys_io      = IO_PHYS,
+        .io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+        .boot_params  = (0x80000100),
+        .map_io       = dm355_leopard_map_io,
+        .init_irq     = dm355_leopard_irq_init,
+        .timer        = &davinci_timer,
+        .init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b2e7f9c63bc5..d9d40450bdc5 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,12 +16,11 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/memory.h>
-#include <linux/etherdevice.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -44,6 +43,9 @@
 #include <mach/mux.h>
 #include <mach/psc.h>
 #include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK             (0x2)
 #define DM644X_EVM_MDIO_FREQUENCY       (2200000) /* PHY bus frequency */
@@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
-        DECLARE_MAC_BUF(mac_str);
-        char mac_addr[6];
-
-        at24_mem_acc = mem_acc;
-
-        /* Read MAC addr from EEPROM */
-        if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
-                printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
-                       print_mac(mac_str, mac_addr));
-        }
-}
 
 static struct at24_platform_data eeprom_info = {
         .byte_len       = (256*1024) / 8,
         .page_size      = 64,
         .flags          = AT24_FLAG_ADDR16,
-        .setup          = at24_setup,
+        .setup          = davinci_get_mac_addr,
+        .context        = (void *)0x7f00,
 };
 
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
-        if (at24_mem_acc)
-                return at24_mem_acc->read(at24_mem_acc, buf, off, count);
-        return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
-        if (at24_mem_acc)
-                return at24_mem_acc->write(at24_mem_acc, buf, off, count);
-        return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
 /*
  * MSP430 supports RTC, card detection, input from IR remote, and
  * a bit more.  It triggers interrupts on GPIO(7) from pressing
@@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void)
         return (buf[3] << 8) | buf[2];
 }
 
+static int dm6444evm_mmc_get_cd(int module)
+{
+        int status = dm6444evm_msp430_get_pins();
+
+        return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+        int status = dm6444evm_msp430_get_pins();
+
+        return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+        .get_cd         = dm6444evm_mmc_get_cd,
+        .get_ro         = dm6444evm_mmc_get_ro,
+        .wires          = 4,
+        .version        = MMC_CTLR_VERSION_1
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
         {
                 I2C_BOARD_INFO("dm6446evm_msp", 0x23),
@@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
-        davinci_map_common_io();
         dm644x_init();
 }
 
@@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 static __init void davinci_evm_init(void)
 {
         struct clk *aemif_clk;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
 
         aemif_clk = clk_get(NULL, "aemif");
         clk_enable(aemif_clk);
@@ -671,8 +664,13 @@ static __init void davinci_evm_init(void)
                              ARRAY_SIZE(davinci_evm_devices));
         evm_init_i2c();
 
+        davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
         davinci_serial_init(&uart_config);
 
+        soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+        soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
         /* Register the fixup for PHY on DaVinci */
         phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
                                         davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
new file mode 100644
index 000000000000..e17de6352624
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -0,0 +1,262 @@
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK             (0x2)
+#define DM646X_EVM_MDIO_FREQUENCY       (2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+        .enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+        { .name = "DS1", .active_low = 1, },
+        { .name = "DS2", .active_low = 1, },
+        { .name = "DS3", .active_low = 1, },
+        { .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+        .num_leds = ARRAY_SIZE(evm_leds),
+        .leds     = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+                        unsigned int ngpio, void *c)
+{
+        struct gpio_led *leds = evm_leds;
+        int status;
+
+        while (ngpio--) {
+                leds->gpio = gpio++;
+                leds++;
+        };
+
+        evm_led_dev = platform_device_alloc("leds-gpio", 0);
+        platform_device_add_data(evm_led_dev, &evm_led_data,
+                                sizeof(evm_led_data));
+
+        evm_led_dev->dev.parent = &client->dev;
+        status = platform_device_add(evm_led_dev);
+        if (status < 0) {
+                platform_device_put(evm_led_dev);
+                evm_led_dev = NULL;
+        }
+        return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+                                unsigned ngpio, void *c)
+{
+        if (evm_led_dev) {
+                platform_device_unregister(evm_led_dev);
+                evm_led_dev = NULL;
+        }
+        return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+                        unsigned ngpio, void *c)
+{
+        int status;
+        int i;
+        char label[10];
+
+        for (i = 0; i < 4; ++i) {
+                snprintf(label, 10, "user_sw%d", i);
+                status = gpio_request(gpio, label);
+                if (status)
+                        goto out_free;
+                evm_sw_gpio[i] = gpio++;
+
+                status = gpio_direction_input(evm_sw_gpio[i]);
+                if (status) {
+                        gpio_free(evm_sw_gpio[i]);
+                        evm_sw_gpio[i] = -EINVAL;
+                        goto out_free;
+                }
+
+                status = gpio_export(evm_sw_gpio[i], 0);
+                if (status) {
+                        gpio_free(evm_sw_gpio[i]);
+                        evm_sw_gpio[i] = -EINVAL;
+                        goto out_free;
+                }
+        }
+        return status;
+out_free:
+        for (i = 0; i < 4; ++i) {
+                if (evm_sw_gpio[i] != -EINVAL) {
+                        gpio_free(evm_sw_gpio[i]);
+                        evm_sw_gpio[i] = -EINVAL;
+                }
+        }
+        return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+                        unsigned ngpio, void *c)
+{
+        int i;
+
+        for (i = 0; i < 4; ++i) {
+                if (evm_sw_gpio[i] != -EINVAL) {
+                        gpio_unexport(evm_sw_gpio[i]);
+                        gpio_free(evm_sw_gpio[i]);
+                        evm_sw_gpio[i] = -EINVAL;
+                }
+        }
+        return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+                        unsigned int ngpio, void *c)
+{
+        int status;
+
+        if (ngpio < 8)
+                return -EINVAL;
+
+        status = evm_sw_setup(client, gpio, 4, c);
+        if (status)
+                return status;
+
+        return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+                        unsigned int ngpio, void *c)
+{
+        BUG_ON(ngpio < 8);
+
+        evm_sw_teardown(client, gpio, 4, c);
+        evm_led_teardown(client, gpio+4, 4, c);
+
+        return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+        .gpio_base      = DAVINCI_N_GPIO+1,
+        .setup          = evm_pcf_setup,
+        .teardown       = evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ *  - 0x7f00, 6 bytes Ethernet Address
+ *  - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+        .byte_len       = (256*1024) / 8,
+        .page_size      = 64,
+        .flags          = AT24_FLAG_ADDR16,
+        .setup          = davinci_get_mac_addr,
+        .context        = (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+        {
+                I2C_BOARD_INFO("24c256", 0x50),
+                .platform_data  = &eeprom_info,
+        },
+        {
+                I2C_BOARD_INFO("pcf8574a", 0x38),
+                .platform_data  = &pcf_data,
+        },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+        .bus_freq       = 100 /* kHz */,
+        .bus_delay      = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+        davinci_init_i2c(&i2c_pdata);
+        i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+        dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+        evm_init_i2c();
+        davinci_serial_init(&uart_config);
+
+        soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+        soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+        davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+        .phys_io      = IO_PHYS,
+        .io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+        .boot_params  = (0x80000100),
+        .map_io       = davinci_map_io,
+        .init_irq     = davinci_dm646x_evm_irq_init,
+        .timer        = &davinci_timer,
+        .init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
new file mode 100644
index 000000000000..748a8e48541e
--- /dev/null
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -0,0 +1,189 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK         (0x2)
+#define SFFSDR_MDIO_FREQUENCY   (2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+        /* U-Boot Environment: Block 0
+         * UBL:                Block 1
+         * U-Boot:             Blocks 6-7 (256 kb)
+         * Integrity Kernel:   Blocks 8-31 (3 Mb)
+         * Integrity Data:     Blocks 100-END
+         */
+        {
+                .name           = "Linux Kernel",
+                .offset         = 32 * SZ_128K,
+                .size           = 16 * SZ_128K, /* 2 Mb */
+                .mask_flags     = MTD_WRITEABLE, /* Force read-only */
+        },
+        {
+                .name           = "Linux ROOT",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 256 * SZ_128K, /* 32 Mb */
+                .mask_flags     = 0, /* R/W */
+        },
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+        .parts          = davinci_sffsdr_nandflash_partition,
+        .nr_parts       = ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+        {
+                .start          = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+                .end            = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+                .flags          = IORESOURCE_MEM,
+        }, {
+                .start          = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+                .end            = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+        .name           = "davinci_nand", /* Name of driver */
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &davinci_sffsdr_nandflash_data,
+        },
+        .num_resources  = ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+        .resource       = davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+        .phy_mask       = SFFSDR_PHY_MASK,
+        .mdio_max_freq  = SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+        .byte_len       = (64*1024) / 8,
+        .page_size      = 32,
+        .flags          = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+        {
+                I2C_BOARD_INFO("24lc64", 0x50),
+                .platform_data  = &eeprom_info,
+        },
+        /* Other I2C devices:
+         * MSP430,  addr 0x23 (not used)
+         * PCA9543, addr 0x70 (setup done by U-Boot)
+         * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+         */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+        .bus_freq       = 20 /* kHz */,
+        .bus_delay      = 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+        davinci_init_i2c(&i2c_pdata);
+        i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+        &davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+        .enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+        dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+        platform_add_devices(davinci_sffsdr_devices,
+                             ARRAY_SIZE(davinci_sffsdr_devices));
+        sffsdr_init_i2c();
+        davinci_serial_init(&uart_config);
+        soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+        soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+        setup_usb(0, 0); /* We support only peripheral mode. */
+
+        /* mux VLYNQ pins */
+        davinci_cfg_reg(DM644X_VLYNQEN);
+        davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+        davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+        /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+        .phys_io      = IO_PHYS,
+        .io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+        .boot_params  = (DAVINCI_DDR_BASE + 0x100),
+        .map_io       = davinci_sffsdr_map_io,
+        .init_irq     = davinci_sffsdr_irq_init,
+        .timer        = &davinci_timer,
+        .init_machine = davinci_sffsdr_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f0baaa15a57e..39bf321d70a2 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk)
         if (clk->parent)
                 __clk_enable(clk->parent);
         if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-                davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+                davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+                                clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk)
         if (WARN_ON(clk->usecount == 0))
                 return;
         if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-                davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+                davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+                                clk->lpsc, 0);
         if (clk->parent)
                 __clk_disable(clk->parent);
 }
@@ -164,11 +166,11 @@ static int __init clk_disable_unused(void)
                         continue;
 
                 /* ignore if in Disabled or SwRstDisable states */
-                if (!davinci_psc_is_clk_active(ck->lpsc))
+                if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
                         continue;
 
                 pr_info("Clocks: disable unused %s\n", ck->name);
-                davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+                davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
         }
         spin_unlock_irq(&clockfw_lock);
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 35736ec202f8..27233cb4a2fb 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -67,6 +67,7 @@ struct clk {
         u8                      usecount;
         u8                      flags;
         u8                      lpsc;
+        u8                      psc_ctlr;
         struct clk              *parent;
         struct pll_data         *pll_data;
         u32                     div_reg;
@@ -93,4 +94,7 @@ struct davinci_clk {
         }
 
 int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
 #endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
new file mode 100644
index 000000000000..61ede19c6b54
--- /dev/null
+++ b/arch/arm/mach-davinci/common.c
@@ -0,0 +1,108 @@
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+        char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+        off_t offset = (off_t)context;
+
+        /* Read MAC addr from EEPROM */
+        if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+                pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+        int i;
+        struct davinci_id *dip;
+        u8 variant = (jtag_id & 0xf0000000) >> 28;
+        u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+        for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+                        i++, dip++)
+                /* Don't care about the manufacturer right now */
+                if ((dip->part_no == part_no) && (dip->variant == variant))
+                        return dip;
+
+        return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+        int ret;
+        struct davinci_id *dip;
+
+        if (!soc_info) {
+                ret = -EINVAL;
+                goto err;
+        }
+
+        memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+        if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+                iotable_init(davinci_soc_info.io_desc,
+                                davinci_soc_info.io_desc_num);
+
+        /*
+         * Normally devicemaps_init() would flush caches and tlb after
+         * mdesc->map_io(), but we must also do it here because of the CPU
+         * revision check below.
+         */
+        local_flush_tlb_all();
+        flush_cache_all();
+
+        /*
+         * We want to check CPU revision early for cpu_is_xxxx() macros.
+         * IO space mapping must be initialized before we can do that.
+         */
+        davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+        dip = davinci_get_id(davinci_soc_info.jtag_id);
+        if (!dip) {
+                ret = -EINVAL;
+                goto err;
+        }
+
+        davinci_soc_info.cpu_id = dip->cpu_id;
+        pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+        if (davinci_soc_info.cpu_clks) {
+                ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+                if (ret != 0)
+                        goto err;
+        }
+
+        davinci_intc_base = davinci_soc_info.intc_base;
+        davinci_intc_type = davinci_soc_info.intc_type;
+        return;
+
+err:
+        pr_err("davinci_common_init: SoC Initialization failed\n");
+}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
new file mode 100644
index 000000000000..96c8e97a7deb
--- /dev/null
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -0,0 +1,161 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+        return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+        __raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+        cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+        /* XXX don't know why we need to disable nIRQ here... */
+        cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+        cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+        cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+        cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+        unsigned reg            = BIT_WORD(irq);
+        unsigned mask           = BIT_MASK(irq);
+        unsigned polarity       = cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+        unsigned type           = cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+        switch (flow_type) {
+        case IRQ_TYPE_EDGE_RISING:
+                polarity |= mask;
+                type |= mask;
+                break;
+        case IRQ_TYPE_EDGE_FALLING:
+                polarity &= ~mask;
+                type |= mask;
+                break;
+        case IRQ_TYPE_LEVEL_HIGH:
+                polarity |= mask;
+                type &= ~mask;
+                break;
+        case IRQ_TYPE_LEVEL_LOW:
+                polarity &= ~mask;
+                type &= ~mask;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+        cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+        return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+        .name           = "cp_intc",
+        .ack            = cp_intc_ack_irq,
+        .mask           = cp_intc_mask_irq,
+        .unmask         = cp_intc_unmask_irq,
+        .set_type       = cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+                         u8 *irq_prio)
+{
+        unsigned num_reg        = BITS_TO_LONGS(num_irq);
+        int i;
+
+        cp_intc_base = base;
+
+        cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+        /* Disable all host interrupts */
+        cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+        /* Disable system interrupts */
+        for (i = 0; i < num_reg; i++)
+                cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+        /* Set to normal mode, no nesting, no priority hold */
+        cp_intc_write(0, CP_INTC_CTRL);
+        cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+        /* Clear system interrupt status */
+        for (i = 0; i < num_reg; i++)
+                cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+        /* Enable nIRQ (what about nFIQ?) */
+        cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+        /*
+         * Priority is determined by host channel: lower channel number has
+         * higher priority i.e. channel 0 has highest priority and channel 31
+         * had the lowest priority.
+         */
+        num_reg = (num_irq + 3) >> 2;   /* 4 channels per register */
+        if (irq_prio) {
+                unsigned j, k;
+                u32 val;
+
+                for (k = i = 0; i < num_reg; i++) {
+                        for (val = j = 0; j < 4; j++, k++) {
+                                val >>= 8;
+                                if (k < num_irq)
+                                        val |= irq_prio[k] << 24;
+                        }
+
+                        cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+                }
+        } else  {
+                /*
+                 * Default everything to channel 15 if priority not specified.
+                 * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+                 * are mapped to nIRQ.
+                 */
+                for (i = 0; i < num_reg; i++)
+                        cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+        }
+
+        /* Set up genirq dispatching for cp_intc */
+        for (i = 0; i < num_irq; i++) {
+                set_irq_chip(i, &cp_intc_irq_chip);
+                set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+                set_irq_handler(i, handle_edge_irq);
+        }
+
+        /* Enable global interrupt */
+        cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a31370b93dd2..de16f347566a 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,8 +23,14 @@
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
 
 #define DAVINCI_I2C_BASE             0x01C21000
+#define DAVINCI_MMCSD0_BASE          0x01E10000
+#define DM355_MMCSD0_BASE            0x01E11000
+#define DM355_MMCSD1_BASE            0x01E00000
 
 static struct resource i2c_resources[] = {
         {
@@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
         (void) platform_device_register(&davinci_i2c_device);
 }
 
+#if     defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+        {
+                /* different on dm355 */
+                .start = DAVINCI_MMCSD0_BASE,
+                .end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        /* IRQs:  MMC/SD, then SDIO */
+        {
+                .start = IRQ_MMCINT,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                /* different on dm355 */
+                .start = IRQ_SDIOINT,
+                .flags = IORESOURCE_IRQ,
+        },
+        /* DMA channels: RX, then TX */
+        {
+                .start = DAVINCI_DMA_MMCRXEVT,
+                .flags = IORESOURCE_DMA,
+        }, {
+                .start = DAVINCI_DMA_MMCTXEVT,
+                .flags = IORESOURCE_DMA,
+        },
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+        .name = "davinci_mmc",
+        .id = 0,
+        .dev = {
+                .dma_mask = &mmcsd0_dma_mask,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+        .num_resources = ARRAY_SIZE(mmcsd0_resources),
+        .resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+        {
+                .start = DM355_MMCSD1_BASE,
+                .end   = DM355_MMCSD1_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        /* IRQs:  MMC/SD, then SDIO */
+        {
+                .start = IRQ_DM355_MMCINT1,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start = IRQ_DM355_SDIOINT1,
+                .flags = IORESOURCE_IRQ,
+        },
+        /* DMA channels: RX, then TX */
+        {
+                .start = 30,    /* rx */
+                .flags = IORESOURCE_DMA,
+        }, {
+                .start = 31,    /* tx */
+                .flags = IORESOURCE_DMA,
+        },
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+        .name = "davinci_mmc",
+        .id = 1,
+        .dev = {
+                .dma_mask = &mmcsd1_dma_mask,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+        .num_resources = ARRAY_SIZE(mmcsd1_resources),
+        .resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+        struct platform_device  *pdev = NULL;
+
+        if (WARN_ON(cpu_is_davinci_dm646x()))
+                return;
+
+        /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+         * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+         *
+         * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+         * not handled right here ...
+         */
+        switch (module) {
+        case 1:
+                if (!cpu_is_davinci_dm355())
+                        break;
+
+                /* REVISIT we may not need all these pins if e.g. this
+                 * is a hard-wired SDIO device...
+                 */
+                davinci_cfg_reg(DM355_SD1_CMD);
+                davinci_cfg_reg(DM355_SD1_CLK);
+                davinci_cfg_reg(DM355_SD1_DATA0);
+                davinci_cfg_reg(DM355_SD1_DATA1);
+                davinci_cfg_reg(DM355_SD1_DATA2);
+                davinci_cfg_reg(DM355_SD1_DATA3);
+
+                pdev = &davinci_mmcsd1_device;
+                break;
+        case 0:
+                if (cpu_is_davinci_dm355()) {
+                        mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+                        mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+                        mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+                        /* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
+                        davinci_cfg_reg(DM355_MMCSD0);
+
+                        /* enable RX EDMA */
+                        davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+                }
+
+                else if (cpu_is_davinci_dm644x()) {
+                        /* REVISIT: should this be in board-init code? */
+                        void __iomem *base =
+                                IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+                        /* Power-on 3.3V IO cells */
+                        __raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+                        /*Set up the pull regiter for MMC */
+                        davinci_cfg_reg(DM644X_MSTK);
+                }
+
+                pdev = &davinci_mmcsd0_device;
+                break;
+        }
+
+        if (WARN_ON(!pdev))
+                return;
+
+        pdev->dev.platform_data = config;
+        platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+        {
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device davinci_wdt_device = {
+        .name           = "watchdog",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
+        .resource       = wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+        wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+        wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+        platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+        {
+                .base           = IO_ADDRESS(DAVINCI_TIMER0_BASE),
+                .bottom_irq     = IRQ_TINT0_TINT12,
+                .top_irq        = IRQ_TINT0_TINT34,
+        },
+        {
+                .base           = IO_ADDRESS(DAVINCI_TIMER1_BASE),
+                .bottom_irq     = IRQ_TINT1_TINT12,
+                .top_irq        = IRQ_TINT1_TINT34,
+        },
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+        /* please keep these calls, and their implementations above,
+         * in alphabetical order so they're easier to sort through.
+         */
+        davinci_init_wdt();
+
+        return 0;
+}
+arch_initcall(davinci_init_devices);
+
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 000000000000..baaaf328de2e
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,730 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE        (IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ          24000000        /* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+        .num       = 1,
+        .phys_base = DAVINCI_PLL1_BASE,
+        .flags     = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+        .num       = 2,
+        .phys_base = DAVINCI_PLL2_BASE,
+        .flags     = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+        .name = "ref_clk",
+        /* FIXME -- crystal rate is board-specific */
+        .rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+        .name = "pll1",
+        .parent = &ref_clk,
+        .flags = CLK_PLL,
+        .pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+        .name = "pll1_aux_clk",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+        .name = "pll1_sysclk1",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+        .name = "pll1_sysclk2",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+        .name = "pll1_sysclk3",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+        .name = "pll1_sysclk4",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+        .name = "pll1_sysclkbp",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL | PRE_PLL,
+        .div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+        .name = "vpss_dac",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+        .name = "vpss_master",
+        .parent = &pll1_sysclk4,
+        .lpsc = DAVINCI_LPSC_VPSSMSTR,
+        .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+        .name = "vpss_slave",
+        .parent = &pll1_sysclk4,
+        .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+        .name = "clkout1",
+        .parent = &pll1_aux_clk,
+        /* NOTE:  clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+        .name = "clkout2",
+        .parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+        .name = "pll2",
+        .parent = &ref_clk,
+        .flags = CLK_PLL,
+        .pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+        .name = "pll2_sysclk1",
+        .parent = &pll2_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+        .name = "pll2_sysclkbp",
+        .parent = &pll2_clk,
+        .flags = CLK_PLL | PRE_PLL,
+        .div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+        .name = "clkout3",
+        .parent = &pll2_sysclkbp,
+        /* NOTE:  clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+        .name = "arm_clk",
+        .parent = &pll1_sysclk1,
+        .lpsc = DAVINCI_LPSC_ARM,
+        .flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ *   - in SyncReset state by default
+ *      .lpsc = DAVINCI_LPSC_TPCC,
+ *      .lpsc = DAVINCI_LPSC_TPTC0,
+ *      .lpsc = DAVINCI_LPSC_TPTC1,
+ *      .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ *      .lpsc = DAVINCI_LPSC_MEMSTICK,
+ *   - in Enabled state by default
+ *      .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ *      .lpsc = DAVINCI_LPSC_SCR2,      // "bus"
+ *      .lpsc = DAVINCI_LPSC_SCR3,      // "bus"
+ *      .lpsc = DAVINCI_LPSC_SCR4,      // "bus"
+ *      .lpsc = DAVINCI_LPSC_CROSSBAR,  // "emulation"
+ *      .lpsc = DAVINCI_LPSC_CFG27,     // "test"
+ *      .lpsc = DAVINCI_LPSC_CFG3,      // "test"
+ *      .lpsc = DAVINCI_LPSC_CFG5,      // "test"
+ */
+
+static struct clk mjcp_clk = {
+        .name = "mjcp",
+        .parent = &pll1_sysclk1,
+        .lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+        .name = "uart0",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+        .name = "uart1",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+        .name = "uart2",
+        .parent = &pll1_sysclk2,
+        .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+        .name = "i2c",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+        .name = "asp0",
+        .parent = &pll1_sysclk2,
+        .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+        .name = "asp1",
+        .parent = &pll1_sysclk2,
+        .lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+        .name = "mmcsd0",
+        .parent = &pll1_sysclk2,
+        .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+        .name = "mmcsd1",
+        .parent = &pll1_sysclk2,
+        .lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+        .name = "spi0",
+        .parent = &pll1_sysclk2,
+        .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+        .name = "spi1",
+        .parent = &pll1_sysclk2,
+        .lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+        .name = "spi2",
+        .parent = &pll1_sysclk2,
+        .lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+        .name = "gpio",
+        .parent = &pll1_sysclk2,
+        .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+        .name = "aemif",
+        .parent = &pll1_sysclk2,
+        .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+        .name = "pwm0",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+        .name = "pwm1",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+        .name = "pwm2",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+        .name = "pwm3",
+        .parent = &pll1_aux_clk,
+        .lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+        .name = "timer0",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+        .name = "timer1",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+        .name = "timer2",
+        .parent = &pll1_aux_clk,
+        .lpsc = DAVINCI_LPSC_TIMER2,
+        .usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+        .name = "timer3",
+        .parent = &pll1_aux_clk,
+        .lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+        .name = "rto",
+        .parent = &pll1_aux_clk,
+        .lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+        .name = "usb",
+        .parent = &pll1_sysclk2,
+        .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+        CLK(NULL, "ref", &ref_clk),
+        CLK(NULL, "pll1", &pll1_clk),
+        CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+        CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+        CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+        CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+        CLK(NULL, "pll1_aux", &pll1_aux_clk),
+        CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+        CLK(NULL, "vpss_dac", &vpss_dac_clk),
+        CLK(NULL, "vpss_master", &vpss_master_clk),
+        CLK(NULL, "vpss_slave", &vpss_slave_clk),
+        CLK(NULL, "clkout1", &clkout1_clk),
+        CLK(NULL, "clkout2", &clkout2_clk),
+        CLK(NULL, "pll2", &pll2_clk),
+        CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+        CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+        CLK(NULL, "clkout3", &clkout3_clk),
+        CLK(NULL, "arm", &arm_clk),
+        CLK(NULL, "mjcp", &mjcp_clk),
+        CLK(NULL, "uart0", &uart0_clk),
+        CLK(NULL, "uart1", &uart1_clk),
+        CLK(NULL, "uart2", &uart2_clk),
+        CLK("i2c_davinci.1", NULL, &i2c_clk),
+        CLK("soc-audio.0", NULL, &asp0_clk),
+        CLK("soc-audio.1", NULL, &asp1_clk),
+        CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+        CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+        CLK(NULL, "spi0", &spi0_clk),
+        CLK(NULL, "spi1", &spi1_clk),
+        CLK(NULL, "spi2", &spi2_clk),
+        CLK(NULL, "gpio", &gpio_clk),
+        CLK(NULL, "aemif", &aemif_clk),
+        CLK(NULL, "pwm0", &pwm0_clk),
+        CLK(NULL, "pwm1", &pwm1_clk),
+        CLK(NULL, "pwm2", &pwm2_clk),
+        CLK(NULL, "pwm3", &pwm3_clk),
+        CLK(NULL, "timer0", &timer0_clk),
+        CLK(NULL, "timer1", &timer1_clk),
+        CLK("watchdog", NULL, &timer2_clk),
+        CLK(NULL, "timer3", &timer3_clk),
+        CLK(NULL, "rto", &rto_clk),
+        CLK(NULL, "usb", &usb_clk),
+        CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+        {
+                .start = 0x01c66000,
+                .end   = 0x01c667ff,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_DM355_SPINT0_1,
+                .flags = IORESOURCE_IRQ,
+        },
+        /* Not yet used, so not included:
+         * IORESOURCE_IRQ:
+         *  - IRQ_DM355_SPINT0_0
+         * IORESOURCE_DMA:
+         *  - DAVINCI_DMA_SPI_SPIX
+         *  - DAVINCI_DMA_SPI_SPIR
+         */
+};
+
+static struct platform_device dm355_spi0_device = {
+        .name = "spi_davinci",
+        .id = 0,
+        .dev = {
+                .dma_mask = &dm355_spi0_dma_mask,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+        .num_resources = ARRAY_SIZE(dm355_spi0_resources),
+        .resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+                struct spi_board_info *info, unsigned len)
+{
+        /* for now, assume we need MISO */
+        davinci_cfg_reg(DM355_SPI0_SDI);
+
+        /* not all slaves will be wired up */
+        if (chipselect_mask & BIT(0))
+                davinci_cfg_reg(DM355_SPI0_SDENA0);
+        if (chipselect_mask & BIT(1))
+                davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+        spi_register_board_info(info, len);
+
+        platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0         0x00
+#define PINMUX1         0x04
+#define PINMUX2         0x08
+#define PINMUX3         0x0c
+#define PINMUX4         0x10
+#define INTMUX          0x18
+#define EVTMUX          0x1c
+
+/*
+ * Device specific mux setup
+ *
+ *      soc     description     mux  mode   mode  mux    dbg
+ *                              reg  offset mask  mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355,  MMCSD0,         4,   2,     1,    0,     false)
+
+MUX_CFG(DM355,  SD1_CLK,        3,   6,     1,    1,     false)
+MUX_CFG(DM355,  SD1_CMD,        3,   7,     1,    1,     false)
+MUX_CFG(DM355,  SD1_DATA3,      3,   8,     3,    1,     false)
+MUX_CFG(DM355,  SD1_DATA2,      3,   10,    3,    1,     false)
+MUX_CFG(DM355,  SD1_DATA1,      3,   12,    3,    1,     false)
+MUX_CFG(DM355,  SD1_DATA0,      3,   14,    3,    1,     false)
+
+MUX_CFG(DM355,  I2C_SDA,        3,   19,    1,    1,     false)
+MUX_CFG(DM355,  I2C_SCL,        3,   20,    1,    1,     false)
+
+MUX_CFG(DM355,  MCBSP0_BDX,     3,   0,     1,    1,     false)
+MUX_CFG(DM355,  MCBSP0_X,       3,   1,     1,    1,     false)
+MUX_CFG(DM355,  MCBSP0_BFSX,    3,   2,     1,    1,     false)
+MUX_CFG(DM355,  MCBSP0_BDR,     3,   3,     1,    1,     false)
+MUX_CFG(DM355,  MCBSP0_R,       3,   4,     1,    1,     false)
+MUX_CFG(DM355,  MCBSP0_BFSR,    3,   5,     1,    1,     false)
+
+MUX_CFG(DM355,  SPI0_SDI,       4,   1,     1,    0,     false)
+MUX_CFG(DM355,  SPI0_SDENA0,    4,   0,     1,    0,     false)
+MUX_CFG(DM355,  SPI0_SDENA1,    3,   28,    1,    1,     false)
+
+INT_CFG(DM355,  INT_EDMA_CC,          2,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
+
+EVT_CFG(DM355,  EVT8_ASP1_TX,         0,    1,    0,     false)
+EVT_CFG(DM355,  EVT9_ASP1_RX,         1,    1,    0,     false)
+EVT_CFG(DM355,  EVT26_MMC0_RX,        2,    1,    0,     false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+        [IRQ_DM355_CCDC_VDINT0]         = 2,
+        [IRQ_DM355_CCDC_VDINT1]         = 6,
+        [IRQ_DM355_CCDC_VDINT2]         = 6,
+        [IRQ_DM355_IPIPE_HST]           = 6,
+        [IRQ_DM355_H3AINT]              = 6,
+        [IRQ_DM355_IPIPE_SDR]           = 6,
+        [IRQ_DM355_IPIPEIFINT]          = 6,
+        [IRQ_DM355_OSDINT]              = 7,
+        [IRQ_DM355_VENCINT]             = 6,
+        [IRQ_ASQINT]                    = 6,
+        [IRQ_IMXINT]                    = 6,
+        [IRQ_USBINT]                    = 4,
+        [IRQ_DM355_RTOINT]              = 4,
+        [IRQ_DM355_UARTINT2]            = 7,
+        [IRQ_DM355_TINT6]               = 7,
+        [IRQ_CCINT0]                    = 5,    /* dma */
+        [IRQ_CCERRINT]                  = 5,    /* dma */
+        [IRQ_TCERRINT0]                 = 5,    /* dma */
+        [IRQ_TCERRINT]                  = 5,    /* dma */
+        [IRQ_DM355_SPINT2_1]            = 7,
+        [IRQ_DM355_TINT7]               = 4,
+        [IRQ_DM355_SDIOINT0]            = 7,
+        [IRQ_MBXINT]                    = 7,
+        [IRQ_MBRINT]                    = 7,
+        [IRQ_MMCINT]                    = 7,
+        [IRQ_DM355_MMCINT1]             = 7,
+        [IRQ_DM355_PWMINT3]             = 7,
+        [IRQ_DDRINT]                    = 7,
+        [IRQ_AEMIFINT]                  = 7,
+        [IRQ_DM355_SDIOINT1]            = 4,
+        [IRQ_TINT0_TINT12]              = 2,    /* clockevent */
+        [IRQ_TINT0_TINT34]              = 2,    /* clocksource */
+        [IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+        [IRQ_TINT1_TINT34]              = 7,    /* system tick */
+        [IRQ_PWMINT0]                   = 7,
+        [IRQ_PWMINT1]                   = 7,
+        [IRQ_PWMINT2]                   = 7,
+        [IRQ_I2C]                       = 3,
+        [IRQ_UARTINT0]                  = 3,
+        [IRQ_UARTINT1]                  = 3,
+        [IRQ_DM355_SPINT0_0]            = 3,
+        [IRQ_DM355_SPINT0_1]            = 3,
+        [IRQ_DM355_GPIO0]               = 3,
+        [IRQ_DM355_GPIO1]               = 7,
+        [IRQ_DM355_GPIO2]               = 4,
+        [IRQ_DM355_GPIO3]               = 4,
+        [IRQ_DM355_GPIO4]               = 7,
+        [IRQ_DM355_GPIO5]               = 7,
+        [IRQ_DM355_GPIO6]               = 7,
+        [IRQ_DM355_GPIO7]               = 7,
+        [IRQ_DM355_GPIO8]               = 7,
+        [IRQ_DM355_GPIO9]               = 7,
+        [IRQ_DM355_GPIOBNK0]            = 7,
+        [IRQ_DM355_GPIOBNK1]            = 7,
+        [IRQ_DM355_GPIOBNK2]            = 7,
+        [IRQ_DM355_GPIOBNK3]            = 7,
+        [IRQ_DM355_GPIOBNK4]            = 7,
+        [IRQ_DM355_GPIOBNK5]            = 7,
+        [IRQ_DM355_GPIOBNK6]            = 7,
+        [IRQ_COMMTX]                    = 7,
+        [IRQ_COMMRX]                    = 7,
+        [IRQ_EMUINT]                    = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+        12, 13, 24, 56, 57,
+        58, 59, 60, 61, 62,
+        63,
+        -1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+        .n_channel      = 64,
+        .n_region       = 4,
+        .n_slot         = 128,
+        .n_tc           = 2,
+        .noevent        = dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+        {
+                .name   = "edma_cc",
+                .start  = 0x01c00000,
+                .end    = 0x01c00000 + SZ_64K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc0",
+                .start  = 0x01c10000,
+                .end    = 0x01c10000 + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc1",
+                .start  = 0x01c10400,
+                .end    = 0x01c10400 + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = IRQ_CCINT0,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_CCERRINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+        /* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+        .name                   = "edma",
+        .id                     = -1,
+        .dev.platform_data      = &dm355_edma_info,
+        .num_resources          = ARRAY_SIZE(edma_resources),
+        .resource               = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+        {
+                .virtual        = IO_VIRT,
+                .pfn            = __phys_to_pfn(IO_PHYS),
+                .length         = IO_SIZE,
+                .type           = MT_DEVICE
+        },
+        {
+                .virtual        = SRAM_VIRT,
+                .pfn            = __phys_to_pfn(0x00010000),
+                .length         = SZ_32K,
+                /* MT_MEMORY_NONCACHED requires supersection alignment */
+                .type           = MT_DEVICE,
+        },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+        {
+                .variant        = 0x0,
+                .part_no        = 0xb73b,
+                .manufacturer   = 0x00f,
+                .cpu_id         = DAVINCI_CPU_ID_DM355,
+                .name           = "dm355",
+        },
+};
+
+static void __iomem *dm355_psc_bases[] = {
+        IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+        .timers         = davinci_timer_instance,
+        .clockevent_id  = T0_BOT,
+        .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+        {
+                .mapbase        = DAVINCI_UART0_BASE,
+                .irq            = IRQ_UARTINT0,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DAVINCI_UART1_BASE,
+                .irq            = IRQ_UARTINT1,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DM355_UART2_BASE,
+                .irq            = IRQ_DM355_UARTINT2,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .flags          = 0
+        },
+};
+
+static struct platform_device dm355_serial_device = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM,
+        .dev                    = {
+                .platform_data  = dm355_serial_platform_data,
+        },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+        .io_desc                = dm355_io_desc,
+        .io_desc_num            = ARRAY_SIZE(dm355_io_desc),
+        .jtag_id_base           = IO_ADDRESS(0x01c40028),
+        .ids                    = dm355_ids,
+        .ids_num                = ARRAY_SIZE(dm355_ids),
+        .cpu_clks               = dm355_clks,
+        .psc_bases              = dm355_psc_bases,
+        .psc_bases_num          = ARRAY_SIZE(dm355_psc_bases),
+        .pinmux_base            = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+        .pinmux_pins            = dm355_pins,
+        .pinmux_pins_num        = ARRAY_SIZE(dm355_pins),
+        .intc_base              = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+        .intc_type              = DAVINCI_INTC_TYPE_AINTC,
+        .intc_irq_prios         = dm355_default_priorities,
+        .intc_irq_num           = DAVINCI_N_AINTC_IRQ,
+        .timer_info             = &dm355_timer_info,
+        .wdt_base               = IO_ADDRESS(DAVINCI_WDOG_BASE),
+        .gpio_base              = IO_ADDRESS(DAVINCI_GPIO_BASE),
+        .gpio_num               = 104,
+        .gpio_irq               = IRQ_DM355_GPIOBNK0,
+        .serial_dev             = &dm355_serial_device,
+        .sram_dma               = 0x00010000,
+        .sram_len               = SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+        davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+        if (!cpu_is_davinci_dm355())
+                return 0;
+
+        davinci_cfg_reg(DM355_INT_EDMA_CC);
+        platform_device_register(&dm355_edma_device);
+        return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d428ef192eac..fb5449b3c97b 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,7 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/serial_8250.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
 
 #include <mach/dm644x.h>
 #include <mach/clock.h>
@@ -20,6 +24,9 @@
 #include <mach/irqs.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = {
         CLK(NULL, NULL, NULL),
 };
 
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+        .ctrl_reg_offset        = DM644X_EMAC_CNTRL_OFFSET,
+        .ctrl_mod_reg_offset    = DM644X_EMAC_CNTRL_MOD_OFFSET,
+        .ctrl_ram_offset        = DM644X_EMAC_CNTRL_RAM_OFFSET,
+        .mdio_reg_offset        = DM644X_EMAC_MDIO_OFFSET,
+        .ctrl_ram_size          = DM644X_EMAC_CNTRL_RAM_SIZE,
+        .version                = EMAC_VERSION_1,
+};
 
 static struct resource dm644x_emac_resources[] = {
         {
@@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = {
 static struct platform_device dm644x_emac_device = {
        .name            = "davinci_emac",
        .id              = 1,
+       .dev = {
+               .platform_data   = &dm644x_emac_pdata,
+       },
        .num_resources   = ARRAY_SIZE(dm644x_emac_resources),
        .resource        = dm644x_emac_resources,
 };
 
-#endif
+#define PINMUX0         0x00
+#define PINMUX1         0x04
 
 /*
  * Device specific mux setup
@@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = {
  *                              reg  offset mask  mode
  */
 static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
 MUX_CFG(DM644X, HDIREN,         0,   16,    1,    1,     true)
 MUX_CFG(DM644X, ATAEN,          0,   17,    1,    1,     true)
 MUX_CFG(DM644X, ATAEN_DISABLE,  0,   17,    1,    0,     true)
@@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
 
 MUX_CFG(DM644X, LOEEN,          0,   24,    1,    1,     true)
 MUX_CFG(DM644X, LFLDEN,         0,   25,    1,    1,     false)
+#endif
 };
 
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+        [IRQ_VDINT0]            = 2,
+        [IRQ_VDINT1]            = 6,
+        [IRQ_VDINT2]            = 6,
+        [IRQ_HISTINT]           = 6,
+        [IRQ_H3AINT]            = 6,
+        [IRQ_PRVUINT]           = 6,
+        [IRQ_RSZINT]            = 6,
+        [7]                     = 7,
+        [IRQ_VENCINT]           = 6,
+        [IRQ_ASQINT]            = 6,
+        [IRQ_IMXINT]            = 6,
+        [IRQ_VLCDINT]           = 6,
+        [IRQ_USBINT]            = 4,
+        [IRQ_EMACINT]           = 4,
+        [14]                    = 7,
+        [15]                    = 7,
+        [IRQ_CCINT0]            = 5,    /* dma */
+        [IRQ_CCERRINT]          = 5,    /* dma */
+        [IRQ_TCERRINT0]         = 5,    /* dma */
+        [IRQ_TCERRINT]          = 5,    /* dma */
+        [IRQ_PSCIN]             = 7,
+        [21]                    = 7,
+        [IRQ_IDE]               = 4,
+        [23]                    = 7,
+        [IRQ_MBXINT]            = 7,
+        [IRQ_MBRINT]            = 7,
+        [IRQ_MMCINT]            = 7,
+        [IRQ_SDIOINT]           = 7,
+        [28]                    = 7,
+        [IRQ_DDRINT]            = 7,
+        [IRQ_AEMIFINT]          = 7,
+        [IRQ_VLQINT]            = 4,
+        [IRQ_TINT0_TINT12]      = 2,    /* clockevent */
+        [IRQ_TINT0_TINT34]      = 2,    /* clocksource */
+        [IRQ_TINT1_TINT12]      = 7,    /* DSP timer */
+        [IRQ_TINT1_TINT34]      = 7,    /* system tick */
+        [IRQ_PWMINT0]           = 7,
+        [IRQ_PWMINT1]           = 7,
+        [IRQ_PWMINT2]           = 7,
+        [IRQ_I2C]               = 3,
+        [IRQ_UARTINT0]          = 3,
+        [IRQ_UARTINT1]          = 3,
+        [IRQ_UARTINT2]          = 3,
+        [IRQ_SPINT0]            = 3,
+        [IRQ_SPINT1]            = 3,
+        [45]                    = 7,
+        [IRQ_DSP2ARM0]          = 4,
+        [IRQ_DSP2ARM1]          = 4,
+        [IRQ_GPIO0]             = 7,
+        [IRQ_GPIO1]             = 7,
+        [IRQ_GPIO2]             = 7,
+        [IRQ_GPIO3]             = 7,
+        [IRQ_GPIO4]             = 7,
+        [IRQ_GPIO5]             = 7,
+        [IRQ_GPIO6]             = 7,
+        [IRQ_GPIO7]             = 7,
+        [IRQ_GPIOBNK0]          = 7,
+        [IRQ_GPIOBNK1]          = 7,
+        [IRQ_GPIOBNK2]          = 7,
+        [IRQ_GPIOBNK3]          = 7,
+        [IRQ_GPIOBNK4]          = 7,
+        [IRQ_COMMTX]            = 7,
+        [IRQ_COMMRX]            = 7,
+        [IRQ_EMUINT]            = 7,
+};
 
 /*----------------------------------------------------------------------*/
 
@@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = {
 };
 
 /*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+        {
+                .virtual        = IO_VIRT,
+                .pfn            = __phys_to_pfn(IO_PHYS),
+                .length         = IO_SIZE,
+                .type           = MT_DEVICE
+        },
+        {
+                .virtual        = SRAM_VIRT,
+                .pfn            = __phys_to_pfn(0x00008000),
+                .length         = SZ_16K,
+                /* MT_MEMORY_NONCACHED requires supersection alignment */
+                .type           = MT_DEVICE,
+        },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+        {
+                .variant        = 0x0,
+                .part_no        = 0xb700,
+                .manufacturer   = 0x017,
+                .cpu_id         = DAVINCI_CPU_ID_DM6446,
+                .name           = "dm6446",
+        },
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+        IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+        .timers         = davinci_timer_instance,
+        .clockevent_id  = T0_BOT,
+        .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+        {
+                .mapbase        = DAVINCI_UART0_BASE,
+                .irq            = IRQ_UARTINT0,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DAVINCI_UART1_BASE,
+                .irq            = IRQ_UARTINT1,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DAVINCI_UART2_BASE,
+                .irq            = IRQ_UARTINT2,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .flags          = 0
+        },
+};
+
+static struct platform_device dm644x_serial_device = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM,
+        .dev                    = {
+                .platform_data  = dm644x_serial_platform_data,
+        },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+        .io_desc                = dm644x_io_desc,
+        .io_desc_num            = ARRAY_SIZE(dm644x_io_desc),
+        .jtag_id_base           = IO_ADDRESS(0x01c40028),
+        .ids                    = dm644x_ids,
+        .ids_num                = ARRAY_SIZE(dm644x_ids),
+        .cpu_clks               = dm644x_clks,
+        .psc_bases              = dm644x_psc_bases,
+        .psc_bases_num          = ARRAY_SIZE(dm644x_psc_bases),
+        .pinmux_base            = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+        .pinmux_pins            = dm644x_pins,
+        .pinmux_pins_num        = ARRAY_SIZE(dm644x_pins),
+        .intc_base              = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+        .intc_type              = DAVINCI_INTC_TYPE_AINTC,
+        .intc_irq_prios         = dm644x_default_priorities,
+        .intc_irq_num           = DAVINCI_N_AINTC_IRQ,
+        .timer_info             = &dm644x_timer_info,
+        .wdt_base               = IO_ADDRESS(DAVINCI_WDOG_BASE),
+        .gpio_base              = IO_ADDRESS(DAVINCI_GPIO_BASE),
+        .gpio_num               = 71,
+        .gpio_irq               = IRQ_GPIOBNK0,
+        .serial_dev             = &dm644x_serial_device,
+        .emac_pdata             = &dm644x_emac_pdata,
+        .sram_dma               = 0x00008000,
+        .sram_len               = SZ_16K,
+};
+
 void __init dm644x_init(void)
 {
-        davinci_clk_init(dm644x_clks);
-        davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+        davinci_common_init(&davinci_soc_info_dm644x);
 }
 
 static int __init dm644x_init_devices(void)
@@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void)
                 return 0;
 
         platform_device_register(&dm644x_edma_device);
+        platform_device_register(&dm644x_emac_device);
         return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
new file mode 100644
index 000000000000..334f0711e0f5
--- /dev/null
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -0,0 +1,636 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ         27000000
+#define DM646X_AUX_FREQ         24000000
+
+static struct pll_data pll1_data = {
+        .num       = 1,
+        .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+        .num       = 2,
+        .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+        .name = "ref_clk",
+        .rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+        .name = "aux_clkin",
+        .rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+        .name = "pll1",
+        .parent = &ref_clk,
+        .pll_data = &pll1_data,
+        .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+        .name = "pll1_sysclk1",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+        .name = "pll1_sysclk2",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+        .name = "pll1_sysclk3",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+        .name = "pll1_sysclk4",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+        .name = "pll1_sysclk5",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+        .name = "pll1_sysclk6",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+        .name = "pll1_sysclk8",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+        .name = "pll1_sysclk9",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+        .name = "pll1_sysclkbp",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL | PRE_PLL,
+        .div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+        .name = "pll1_aux_clk",
+        .parent = &pll1_clk,
+        .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+        .name = "pll2_clk",
+        .parent = &ref_clk,
+        .pll_data = &pll2_data,
+        .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+        .name = "pll2_sysclk1",
+        .parent = &pll2_clk,
+        .flags = CLK_PLL,
+        .div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+        .name = "dsp",
+        .parent = &pll1_sysclk1,
+        .lpsc = DM646X_LPSC_C64X_CPU,
+        .flags = PSC_DSP,
+        .usecount = 1,                  /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+        .name = "arm",
+        .parent = &pll1_sysclk2,
+        .lpsc = DM646X_LPSC_ARM,
+        .flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+        .name = "uart0",
+        .parent = &aux_clkin,
+        .lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+        .name = "uart1",
+        .parent = &aux_clkin,
+        .lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+        .name = "uart2",
+        .parent = &aux_clkin,
+        .lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+        .name = "I2CCLK",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+        .name = "gpio",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+        .name = "aemif",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_AEMIF,
+        .flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+        .name = "emac",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+        .name = "pwm0",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_PWM0,
+        .usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+        .name = "pwm1",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_PWM1,
+        .usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+        .name = "timer0",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+        .name = "timer1",
+        .parent = &pll1_sysclk3,
+        .lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+        .name = "timer2",
+        .parent = &pll1_sysclk3,
+        .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+        .name = "vpif0",
+        .parent = &ref_clk,
+        .lpsc = DM646X_LPSC_VPSSMSTR,
+        .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+        .name = "vpif1",
+        .parent = &ref_clk,
+        .lpsc = DM646X_LPSC_VPSSSLV,
+        .flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+        CLK(NULL, "ref", &ref_clk),
+        CLK(NULL, "aux", &aux_clkin),
+        CLK(NULL, "pll1", &pll1_clk),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+        CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+        CLK(NULL, "pll1_aux", &pll1_aux_clk),
+        CLK(NULL, "pll2", &pll2_clk),
+        CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+        CLK(NULL, "dsp", &dsp_clk),
+        CLK(NULL, "arm", &arm_clk),
+        CLK(NULL, "uart0", &uart0_clk),
+        CLK(NULL, "uart1", &uart1_clk),
+        CLK(NULL, "uart2", &uart2_clk),
+        CLK("i2c_davinci.1", NULL, &i2c_clk),
+        CLK(NULL, "gpio", &gpio_clk),
+        CLK(NULL, "aemif", &aemif_clk),
+        CLK("davinci_emac.1", NULL, &emac_clk),
+        CLK(NULL, "pwm0", &pwm0_clk),
+        CLK(NULL, "pwm1", &pwm1_clk),
+        CLK(NULL, "timer0", &timer0_clk),
+        CLK(NULL, "timer1", &timer1_clk),
+        CLK("watchdog", NULL, &timer2_clk),
+        CLK(NULL, "vpif0", &vpif0_clk),
+        CLK(NULL, "vpif1", &vpif1_clk),
+        CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+        .ctrl_reg_offset        = DM646X_EMAC_CNTRL_OFFSET,
+        .ctrl_mod_reg_offset    = DM646X_EMAC_CNTRL_MOD_OFFSET,
+        .ctrl_ram_offset        = DM646X_EMAC_CNTRL_RAM_OFFSET,
+        .mdio_reg_offset        = DM646X_EMAC_MDIO_OFFSET,
+        .ctrl_ram_size          = DM646X_EMAC_CNTRL_RAM_SIZE,
+        .version                = EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+        {
+                .start  = DM646X_EMAC_BASE,
+                .end    = DM646X_EMAC_BASE + 0x47ff,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = IRQ_DM646X_EMACRXTHINT,
+                .end    = IRQ_DM646X_EMACRXTHINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_DM646X_EMACRXINT,
+                .end    = IRQ_DM646X_EMACRXINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_DM646X_EMACTXINT,
+                .end    = IRQ_DM646X_EMACTXINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_DM646X_EMACMISCINT,
+                .end    = IRQ_DM646X_EMACMISCINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device dm646x_emac_device = {
+        .name           = "davinci_emac",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &dm646x_emac_pdata,
+        },
+        .num_resources  = ARRAY_SIZE(dm646x_emac_resources),
+        .resource       = dm646x_emac_resources,
+};
+
+#define PINMUX0         0x00
+#define PINMUX1         0x04
+
+/*
+ * Device specific mux setup
+ *
+ *      soc     description     mux  mode   mode  mux    dbg
+ *                              reg  offset mask  mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN,          0,   0,     1,    1,     true)
+
+MUX_CFG(DM646X, AUDCK1,         0,   29,    1,    0,     false)
+
+MUX_CFG(DM646X, AUDCK0,         0,   28,    1,    0,     false)
+
+MUX_CFG(DM646X, CRGMUX,                 0,   24,    7,    5,     true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE,        0,   22,    3,    0,     true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE,        0,   20,    3,    0,     true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE,        0,   18,    3,    0,     true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE,        0,   16,    3,    0,     true)
+
+MUX_CFG(DM646X, STSOMUX,                0,   22,    3,    2,     true)
+
+MUX_CFG(DM646X, STSIMUX,                0,   20,    3,    2,     true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL,       0,   18,    3,    2,     true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL,       0,   16,    3,    2,     true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL,         0,   18,    3,    3,     true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL,         0,   16,    3,    3,     true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+        [IRQ_DM646X_VP_VERTINT0]        = 7,
+        [IRQ_DM646X_VP_VERTINT1]        = 7,
+        [IRQ_DM646X_VP_VERTINT2]        = 7,
+        [IRQ_DM646X_VP_VERTINT3]        = 7,
+        [IRQ_DM646X_VP_ERRINT]          = 7,
+        [IRQ_DM646X_RESERVED_1]         = 7,
+        [IRQ_DM646X_RESERVED_2]         = 7,
+        [IRQ_DM646X_WDINT]              = 7,
+        [IRQ_DM646X_CRGENINT0]          = 7,
+        [IRQ_DM646X_CRGENINT1]          = 7,
+        [IRQ_DM646X_TSIFINT0]           = 7,
+        [IRQ_DM646X_TSIFINT1]           = 7,
+        [IRQ_DM646X_VDCEINT]            = 7,
+        [IRQ_DM646X_USBINT]             = 7,
+        [IRQ_DM646X_USBDMAINT]          = 7,
+        [IRQ_DM646X_PCIINT]             = 7,
+        [IRQ_CCINT0]                    = 7,    /* dma */
+        [IRQ_CCERRINT]                  = 7,    /* dma */
+        [IRQ_TCERRINT0]                 = 7,    /* dma */
+        [IRQ_TCERRINT]                  = 7,    /* dma */
+        [IRQ_DM646X_TCERRINT2]          = 7,
+        [IRQ_DM646X_TCERRINT3]          = 7,
+        [IRQ_DM646X_IDE]                = 7,
+        [IRQ_DM646X_HPIINT]             = 7,
+        [IRQ_DM646X_EMACRXTHINT]        = 7,
+        [IRQ_DM646X_EMACRXINT]          = 7,
+        [IRQ_DM646X_EMACTXINT]          = 7,
+        [IRQ_DM646X_EMACMISCINT]        = 7,
+        [IRQ_DM646X_MCASP0TXINT]        = 7,
+        [IRQ_DM646X_MCASP0RXINT]        = 7,
+        [IRQ_AEMIFINT]                  = 7,
+        [IRQ_DM646X_RESERVED_3]         = 7,
+        [IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+        [IRQ_TINT0_TINT34]              = 7,    /* clocksource */
+        [IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+        [IRQ_TINT1_TINT34]              = 7,    /* system tick */
+        [IRQ_PWMINT0]                   = 7,
+        [IRQ_PWMINT1]                   = 7,
+        [IRQ_DM646X_VLQINT]             = 7,
+        [IRQ_I2C]                       = 7,
+        [IRQ_UARTINT0]                  = 7,
+        [IRQ_UARTINT1]                  = 7,
+        [IRQ_DM646X_UARTINT2]           = 7,
+        [IRQ_DM646X_SPINT0]             = 7,
+        [IRQ_DM646X_SPINT1]             = 7,
+        [IRQ_DM646X_DSP2ARMINT]         = 7,
+        [IRQ_DM646X_RESERVED_4]         = 7,
+        [IRQ_DM646X_PSCINT]             = 7,
+        [IRQ_DM646X_GPIO0]              = 7,
+        [IRQ_DM646X_GPIO1]              = 7,
+        [IRQ_DM646X_GPIO2]              = 7,
+        [IRQ_DM646X_GPIO3]              = 7,
+        [IRQ_DM646X_GPIO4]              = 7,
+        [IRQ_DM646X_GPIO5]              = 7,
+        [IRQ_DM646X_GPIO6]              = 7,
+        [IRQ_DM646X_GPIO7]              = 7,
+        [IRQ_DM646X_GPIOBNK0]           = 7,
+        [IRQ_DM646X_GPIOBNK1]           = 7,
+        [IRQ_DM646X_GPIOBNK2]           = 7,
+        [IRQ_DM646X_DDRINT]             = 7,
+        [IRQ_DM646X_AEMIFINT]           = 7,
+        [IRQ_COMMTX]                    = 7,
+        [IRQ_COMMRX]                    = 7,
+        [IRQ_EMUINT]                    = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+         0,  1,  2,  3, 13,
+        14, 15, 24, 25, 26,
+        27, 30, 31, 54, 55,
+        56,
+        -1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+        .n_channel      = 64,
+        .n_region       = 6,    /* 0-1, 4-7 */
+        .n_slot         = 512,
+        .n_tc           = 4,
+        .noevent        = dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+        {
+                .name   = "edma_cc",
+                .start  = 0x01c00000,
+                .end    = 0x01c00000 + SZ_64K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc0",
+                .start  = 0x01c10000,
+                .end    = 0x01c10000 + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc1",
+                .start  = 0x01c10400,
+                .end    = 0x01c10400 + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc2",
+                .start  = 0x01c10800,
+                .end    = 0x01c10800 + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc3",
+                .start  = 0x01c10c00,
+                .end    = 0x01c10c00 + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = IRQ_CCINT0,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_CCERRINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+        /* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+        .name                   = "edma",
+        .id                     = -1,
+        .dev.platform_data      = &dm646x_edma_info,
+        .num_resources          = ARRAY_SIZE(edma_resources),
+        .resource               = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+        {
+                .virtual        = IO_VIRT,
+                .pfn            = __phys_to_pfn(IO_PHYS),
+                .length         = IO_SIZE,
+                .type           = MT_DEVICE
+        },
+        {
+                .virtual        = SRAM_VIRT,
+                .pfn            = __phys_to_pfn(0x00010000),
+                .length         = SZ_32K,
+                /* MT_MEMORY_NONCACHED requires supersection alignment */
+                .type           = MT_DEVICE,
+        },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+        {
+                .variant        = 0x0,
+                .part_no        = 0xb770,
+                .manufacturer   = 0x017,
+                .cpu_id         = DAVINCI_CPU_ID_DM6467,
+                .name           = "dm6467",
+        },
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+        IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+        .timers         = davinci_timer_instance,
+        .clockevent_id  = T0_BOT,
+        .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+        {
+                .mapbase        = DAVINCI_UART0_BASE,
+                .irq            = IRQ_UARTINT0,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM32,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DAVINCI_UART1_BASE,
+                .irq            = IRQ_UARTINT1,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM32,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DAVINCI_UART2_BASE,
+                .irq            = IRQ_DM646X_UARTINT2,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                  UPF_IOREMAP,
+                .iotype         = UPIO_MEM32,
+                .regshift       = 2,
+        },
+        {
+                .flags          = 0
+        },
+};
+
+static struct platform_device dm646x_serial_device = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM,
+        .dev                    = {
+                .platform_data  = dm646x_serial_platform_data,
+        },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+        .io_desc                = dm646x_io_desc,
+        .io_desc_num            = ARRAY_SIZE(dm646x_io_desc),
+        .jtag_id_base           = IO_ADDRESS(0x01c40028),
+        .ids                    = dm646x_ids,
+        .ids_num                = ARRAY_SIZE(dm646x_ids),
+        .cpu_clks               = dm646x_clks,
+        .psc_bases              = dm646x_psc_bases,
+        .psc_bases_num          = ARRAY_SIZE(dm646x_psc_bases),
+        .pinmux_base            = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+        .pinmux_pins            = dm646x_pins,
+        .pinmux_pins_num        = ARRAY_SIZE(dm646x_pins),
+        .intc_base              = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+        .intc_type              = DAVINCI_INTC_TYPE_AINTC,
+        .intc_irq_prios         = dm646x_default_priorities,
+        .intc_irq_num           = DAVINCI_N_AINTC_IRQ,
+        .timer_info             = &dm646x_timer_info,
+        .wdt_base               = IO_ADDRESS(DAVINCI_WDOG_BASE),
+        .gpio_base              = IO_ADDRESS(DAVINCI_GPIO_BASE),
+        .gpio_num               = 43, /* Only 33 usable */
+        .gpio_irq               = IRQ_DM646X_GPIOBNK0,
+        .serial_dev             = &dm646x_serial_device,
+        .emac_pdata             = &dm646x_emac_pdata,
+        .sram_dma               = 0x10010000,
+        .sram_len               = SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+        davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+        if (!cpu_is_davinci_dm646x())
+                return 0;
+
+        platform_device_register(&dm646x_edma_device);
+        platform_device_register(&dm646x_emac_device);
+        return 0;
+}
+postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1aba41c6351e..1b6532159c58 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -23,6 +23,7 @@
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
@@ -37,14 +38,13 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
-static unsigned __initdata ngpio;
-
 /* create a non-inlined version */
 static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
         return __gpio_to_controller(gpio);
 }
 
+static int __init davinci_gpio_irq_setup(void);
 
 /*--------------------------------------------------------------------------*/
 
@@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int __init davinci_gpio_setup(void)
 {
         int i, base;
+        unsigned ngpio;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-        /* The gpio banks conceptually expose a segmented bitmap,
+        /*
+         * The gpio banks conceptually expose a segmented bitmap,
          * and "ngpio" is one more than the largest zero-based
          * bit index that's valid.
          */
-        if (cpu_is_davinci_dm355()) {           /* or dm335() */
-                ngpio = 104;
-        } else if (cpu_is_davinci_dm644x()) {   /* or dm337() */
-                ngpio = 71;
-        } else if (cpu_is_davinci_dm646x()) {
-                /* NOTE:  each bank has several "reserved" bits,
-                 * unusable as GPIOs.  Only 33 of the GPIO numbers
-                 * are usable, and we're not rejecting the others.
-                 */
-                ngpio = 43;
-        } else {
-                /* if cpu_is_davinci_dm643x() ngpio = 111 */
+        ngpio = soc_info->gpio_num;
+        if (ngpio == 0) {
                 pr_err("GPIO setup:  how many GPIOs?\n");
                 return -EINVAL;
         }
@@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void)
                 gpiochip_add(&chips[i].chip);
         }
 
+        davinci_gpio_irq_setup();
         return 0;
 }
 pure_initcall(davinci_gpio_setup);
@@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq)
 {
         struct gpio_controller *__iomem g = get_irq_chip_data(irq);
         u32 mask = __gpio_mask(irq_to_gpio(irq));
+        unsigned status = irq_desc[irq].status;
+
+        status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+        if (!status)
+                status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
 
-        if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+        if (status & IRQ_TYPE_EDGE_FALLING)
                 __raw_writel(mask, &g->set_falling);
-        if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+        if (status & IRQ_TYPE_EDGE_RISING)
                 __raw_writel(mask, &g->set_rising);
 }
 
@@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger)
         irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
         irq_desc[irq].status |= trigger;
 
-        __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-                     ? &g->set_falling : &g->clr_falling);
-        __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-                     ? &g->set_rising : &g->clr_rising);
+        /* don't enable the IRQ if it's currently disabled */
+        if (irq_desc[irq].depth == 0) {
+                __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+                             ? &g->set_falling : &g->clr_falling);
+                __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+                             ? &g->set_rising : &g->clr_rising);
+        }
         return 0;
 }
 
@@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
                 mask <<= 16;
 
         /* temporarily mask (level sensitive) parent IRQ */
+        desc->chip->mask(irq);
         desc->chip->ack(irq);
         while (1) {
                 u32             status;
@@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 static int __init davinci_gpio_irq_setup(void)
 {
         unsigned        gpio, irq, bank;
-        unsigned        bank_irq;
         struct clk      *clk;
         u32             binten = 0;
+        unsigned        ngpio, bank_irq;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+        ngpio = soc_info->gpio_num;
 
-        if (cpu_is_davinci_dm355()) {           /* or dm335() */
-                bank_irq = IRQ_DM355_GPIOBNK0;
-        } else if (cpu_is_davinci_dm644x()) {
-                bank_irq = IRQ_GPIOBNK0;
-        } else if (cpu_is_davinci_dm646x()) {
-                bank_irq = IRQ_DM646X_GPIOBNK0;
-        } else {
+        bank_irq = soc_info->gpio_irq;
+        if (bank_irq == 0) {
                 printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
                 return -EINVAL;
         }
@@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void)
         /* BINTEN -- per-bank interrupt enable. genirq would also let these
          * bits be set/cleared dynamically.
          */
-        __raw_writel(binten, (void *__iomem)
-                     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+        __raw_writel(binten, soc_info->gpio_base + 0x08);
 
         printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
         return 0;
 }
-arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
deleted file mode 100644
index 018b994cd794..000000000000
--- a/arch/arm/mach-davinci/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE            IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
-        u8      variant;        /* JTAG ID bits 31:28 */
-        u16     part_no;        /* JTAG ID bits 27:12 */
-        u32     manufacturer;   /* JTAG ID bits 11:1 */
-        u32     type;           /* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
-        {
-                /* DM6446 */
-                .part_no      = 0xb700,
-                .variant      = 0x0,
-                .manufacturer = 0x017,
-                .type         = 0x64460000,
-        },
-        {
-                /* DM646X */
-                .part_no      = 0xb770,
-                .variant      = 0x0,
-                .manufacturer = 0x017,
-                .type         = 0x64670000,
-        },
-        {
-                /* DM355 */
-                .part_no        = 0xb73b,
-                .variant        = 0x0,
-                .manufacturer   = 0x00f,
-                .type           = 0x03550000,
-        },
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
-        u32 dev_id, part_no;
-
-        dev_id = __raw_readl(JTAG_ID_BASE);
-
-        part_no = ((dev_id >> 12) & 0xffff);
-
-        return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
-        u32 variant;
-
-        variant = __raw_readl(JTAG_ID_BASE);
-
-        variant = (variant >> 28) & 0xf;
-
-        return variant;
-}
-
-unsigned int davinci_rev(void)
-{
-        return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
-        int i;
-        u16 part_no;
-        u8 variant;
-
-        part_no = davinci_get_part_no();
-        variant = davinci_get_variant();
-
-        /* First check only the major version in a safe way */
-        for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-                if (part_no == (davinci_ids[i].part_no)) {
-                        davinci_revision = davinci_ids[i].type;
-                        break;
-                }
-        }
-
-        /* Check if we can find the dev revision */
-        for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-                if (part_no == davinci_ids[i].part_no &&
-                    variant == davinci_ids[i].variant) {
-                        davinci_revision = davinci_ids[i].type;
-                        break;
-                }
-        }
-
-        printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
-               davinci_rev(), variant);
-}
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
deleted file mode 100644
index 3216f21c1238..000000000000
--- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 191770976250..a1f03b606d8f 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -17,7 +17,8 @@ struct sys_timer;
 extern struct sys_timer davinci_timer;
 
 extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
 
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
@@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 
+struct davinci_timer_instance {
+        void __iomem    *base;
+        u32             bottom_irq;
+        u32             top_irq;
+        unsigned long   cmp_off;
+        unsigned int    cmp_irq;
+};
+
+struct davinci_timer_info {
+        struct davinci_timer_instance   *timers;
+        unsigned int                    clockevent_id;
+        unsigned int                    clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+        struct map_desc                 *io_desc;
+        unsigned long                   io_desc_num;
+        u32                             cpu_id;
+        u32                             jtag_id;
+        void __iomem                    *jtag_id_base;
+        struct davinci_id               *ids;
+        unsigned long                   ids_num;
+        struct davinci_clk              *cpu_clks;
+        void __iomem                    **psc_bases;
+        unsigned long                   psc_bases_num;
+        void __iomem                    *pinmux_base;
+        const struct mux_config         *pinmux_pins;
+        unsigned long                   pinmux_pins_num;
+        void __iomem                    *intc_base;
+        int                             intc_type;
+        u8                              *intc_irq_prios;
+        unsigned long                   intc_irq_num;
+        struct davinci_timer_info       *timer_info;
+        void __iomem                    *wdt_base;
+        void __iomem                    *gpio_base;
+        unsigned                        gpio_num;
+        unsigned                        gpio_irq;
+        struct platform_device          *serial_dev;
+        struct emac_platform_data       *emac_pdata;
+        dma_addr_t                      sram_dma;
+        unsigned                        sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT       0xfffe0000
+#define SRAM_SIZE       SZ_128K
+
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
new file mode 100644
index 000000000000..c4d27eec8064
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -0,0 +1,57 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV                     0x00
+#define CP_INTC_CTRL                    0x04
+#define CP_INTC_HOST_CTRL               0x0C
+#define CP_INTC_GLOBAL_ENABLE           0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL    0x1C
+#define CP_INTC_SYS_STAT_IDX_SET        0x20
+#define CP_INTC_SYS_STAT_IDX_CLR        0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET      0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR      0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE    0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET     0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR     0x38
+#define CP_INTC_PACING_PRESCALE         0x40
+#define CP_INTC_VECTOR_BASE             0x50
+#define CP_INTC_VECTOR_SIZE             0x54
+#define CP_INTC_VECTOR_NULL             0x58
+#define CP_INTC_PRIO_IDX                0x80
+#define CP_INTC_PRIO_VECTOR             0x84
+#define CP_INTC_SECURE_ENABLE           0x90
+#define CP_INTC_SECURE_PRIO_IDX         0x94
+#define CP_INTC_PACING_PARAM(n)         (0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n)           (0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n)           (0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n)         (0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n)         (0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n)       (0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n)       (0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n)             (0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n)             (0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n)        (0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n)         (0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n)             (0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n)        (0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n)         (0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n)    (0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n)   (0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n)          (0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n)     (0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n)          (0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+                         u8 *irq_prio);
+
+#endif  /* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 27cfb1b3a662..d12a5ed2959a 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -16,17 +16,30 @@
 #ifndef _ASM_ARCH_CPU_H
 #define _ASM_ARCH_CPU_H
 
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
 
-#define IS_DAVINCI_CPU(type, id)                        \
-static inline int is_davinci_dm ##type(void)            \
-{                                                       \
-        return (davinci_rev() == (id)) ? 1 : 0;         \
+struct davinci_id {
+        u8      variant;        /* JTAG ID bits 31:28 */
+        u16     part_no;        /* JTAG ID bits 27:12 */
+        u16     manufacturer;   /* JTAG ID bits 11:1 */
+        u32     cpu_id;
+        char    *name;
+};
+
+/* Can use lower 16 bits of cpu id  for a variant when required */
+#define DAVINCI_CPU_ID_DM6446           0x64460000
+#define DAVINCI_CPU_ID_DM6467           0x64670000
+#define DAVINCI_CPU_ID_DM355            0x03550000
+
+#define IS_DAVINCI_CPU(type, id)                                        \
+static inline int is_davinci_ ##type(void)                              \
+{                                                                       \
+        return (davinci_soc_info.cpu_id == (id));                       \
 }
 
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d5d062..de3fc2182b47 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -9,6 +9,16 @@
  * or implied.
  */
 
+/* Modifications
+ * Jan 2009     Chaithrika U S  Added senduart, busyuart, waituart
+ *                              macros, based on debug-8250.S file
+ *                              but using 32-bit accesses required for
+ *                              some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT      2
+
                 .macro addruart, rx
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
@@ -17,5 +27,22 @@
                 orr     \rx, \rx, #0x00c20000   @ UART 0
                 .endm
 
-#define UART_SHIFT      2
-#include <asm/hardware/debug-8250.S>
+                .macro  senduart,rd,rx
+                str     \rd, [\rx, #UART_TX << UART_SHIFT]
+                .endm
+
+                .macro  busyuart,rd,rx
+1002:           ldr     \rd, [\rx, #UART_LSR << UART_SHIFT]
+                and     \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                teq     \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                bne     1002b
+                .endm
+
+                .macro  waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:           ldr     \rd, [\rx, #UART_MSR << UART_SHIFT]
+                tst     \rd, #UART_MSR_CTS
+                beq     1001b
+#endif
+                .endm
+
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 000000000000..54903b72438e
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,22 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+                struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 3dcb9f4e58b4..15d42b92a8c9 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -24,6 +24,7 @@
 
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
+#include <mach/emac.h>
 
 #define DM644X_EMAC_BASE                (0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET        (0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
new file mode 100644
index 000000000000..1fc764c8646e
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -0,0 +1,26 @@
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE                (0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET        (0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET    (0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET    (0x2000)
+#define DM646X_EMAC_MDIO_OFFSET         (0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE      (0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index f6fc5396dafc..24a379239d7f 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
 /* platform_data for EDMA driver */
 struct edma_soc_info {
 
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
new file mode 100644
index 000000000000..beff4fb7c845
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+        char mac_addr[ETH_ALEN];
+        u32 ctrl_reg_offset;
+        u32 ctrl_mod_reg_offset;
+        u32 ctrl_ram_offset;
+        u32 mdio_reg_offset;
+        u32 ctrl_ram_size;
+        u32 phy_mask;
+        u32 mdio_max_freq;
+        u8 rmii_en;
+        u8 version;
+};
+
+enum {
+        EMAC_VERSION_1, /* DM644x */
+        EMAC_VERSION_2, /* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 039b84f933b3..fbdebc7cb409 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -15,17 +15,36 @@
                 .endm
 
                 .macro  get_irqnr_preamble, base, tmp
-                ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+                ldr \base, =davinci_intc_base
+                ldr \base, [\base]
                 .endm
 
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
 
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+                ldr \tmp, =davinci_intc_type
+                ldr \tmp, [\tmp]
+                cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+                beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
                 ldr \tmp, [\base, #0x14]
-                mov \tmp, \tmp, lsr #2
+                movs \tmp, \tmp, lsr #2
                 sub \irqnr, \tmp, #1
-                cmp \tmp, #0
+                b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001:           ldr \irqnr, [\base, #0x80] /* get irq number */
+                and \irqnr, \irqnr, #0xff  /* irq is in bits 0-9 */
+                mov \tmp, \irqnr, lsr #3
+                and \tmp, \tmp, #0xfc
+                add \tmp, \tmp, #0x280 /* get the register offset */
+                ldr \irqstat, [\base, \tmp] /* get the intc status */
+                cmp \irqstat, #0x0
+#endif
+1002:
                 .endm
 
                 .macro  irq_prio_table
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index efe3281364e6..ae0745568316 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -17,6 +17,7 @@
 #include <asm-generic/gpio.h>
 
 #include <mach/irqs.h>
+#include <mach/common.h>
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
@@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem
 __gpio_to_controller(unsigned gpio)
 {
         void *__iomem ptr;
+        void __iomem *base = davinci_soc_info.gpio_base;
 
         if (gpio < 32 * 1)
-                ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+                ptr = base + 0x10;
         else if (gpio < 32 * 2)
-                ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+                ptr = base + 0x38;
         else if (gpio < 32 * 3)
-                ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+                ptr = base + 0x60;
         else if (gpio < 32 * 4)
-                ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+                ptr = base + 0x88;
         else
                 ptr = NULL;
         return ptr;
@@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio)
 {
         if (gpio >= DAVINCI_N_GPIO)
                 return -EINVAL;
-        return DAVINCI_N_AINTC_IRQ + gpio;
+        return davinci_soc_info.intc_irq_num + gpio;
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
         /* caller guarantees gpio_to_irq() succeeded */
-        return irq - DAVINCI_N_AINTC_IRQ;
+        return irq - davinci_soc_info.intc_irq_num;
 }
 
 #endif                          /* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 18066074c995..bc5d6aaa69a3 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -30,6 +30,9 @@
 /* Base address */
 #define DAVINCI_ARM_INTC_BASE 0x01C48000
 
+#define DAVINCI_INTC_TYPE_AINTC         0
+#define DAVINCI_INTC_TYPE_CP_INTC       1
+
 /* Interrupt lines */
 #define IRQ_VDINT0       0
 #define IRQ_VDINT1       1
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 86c25c7f3ce3..c712c7cdf38f 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -21,7 +21,6 @@
  * Definitions
  **************************************************************************/
 #define DAVINCI_DDR_BASE    0x80000000
-#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
 
 #define PHYS_OFFSET DAVINCI_DDR_BASE
 
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
new file mode 100644
index 000000000000..5a85e24f3673
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -0,0 +1,33 @@
+/*
+ *  Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+        /* get_cd()/get_wp() may sleep */
+        int     (*get_cd)(int module);
+        int     (*get_ro)(int module);
+        /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+        u8      wires;
+
+        u32     max_freq;
+
+        /* any additional host capabilities: OR'd in to mmc->f_caps */
+        u32     caps;
+
+        /* Version of the MMC/SD controller */
+        u8      version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+        MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
+        MMC_CTLR_VERSION_2,     /* DA830 */
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bae22cb3e27b..27378458542f 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -19,16 +19,6 @@
 #ifndef __INC_MACH_MUX_H
 #define __INC_MACH_MUX_H
 
-/* System module registers */
-#define PINMUX0                 0x00
-#define PINMUX1                 0x04
-/* dm355 only */
-#define PINMUX2                 0x08
-#define PINMUX3                 0x0c
-#define PINMUX4                 0x10
-#define INTMUX                  0x18
-#define EVTMUX                  0x1c
-
 struct mux_config {
         const char *name;
         const char *mux_reg_name;
@@ -168,15 +158,9 @@ enum davinci_dm355_index {
 
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
-                                unsigned long size);
 extern int davinci_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
-                                       unsigned long size) { return 0; }
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 55a90d419fac..ab8a2586d1cc 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -27,6 +27,8 @@
 #ifndef __ASM_ARCH_PSC_H
 #define __ASM_ARCH_PSC_H
 
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE    0x01C41000
+
 /* Power and Sleep Controller (PSC) Domains */
 #define DAVINCI_GPSC_ARMDOMAIN      0
 #define DAVINCI_GPSC_DSPDOMAIN      1
@@ -116,8 +118,8 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
-                               char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+                unsigned int id, char enable);
 
 #endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d74a1c..794fa5cf93c1 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,8 +18,6 @@
 #define DAVINCI_UART1_BASE      (IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE      (IO_PHYS + 0x20800)
 
-#define DM355_UART2_BASE        (IO_PHYS + 0x206000)
-
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU             0x0c
 #define UART_DM646X_SCR                 0x10
@@ -30,6 +28,6 @@ struct davinci_uart_config {
         unsigned int enabled_uarts;
 };
 
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
new file mode 100644
index 000000000000..111f7cc71e07
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -0,0 +1,27 @@
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY        512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
new file mode 100644
index 000000000000..1c971d8d8ba8
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/time.h
@@ -0,0 +1,35 @@
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE             (IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE             (IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE               (IO_PHYS + 0x21C00)
+
+enum {
+        T0_BOT,
+        T0_TOP,
+        T1_BOT,
+        T1_TOP,
+        NUM_TIMERS
+};
+
+#define IS_TIMER1(id)           (id & 0x2)
+#define IS_TIMER0(id)           (!IS_TIMER1(id))
+#define IS_TIMER_TOP(id)        ((id & 0x1))
+#define IS_TIMER_BOT(id)        (!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id)         (IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8c165def37b6..1e27475f9a23 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -13,11 +13,24 @@
 #include <linux/serial_reg.h>
 #include <mach/serial.h>
 
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+        /* Add logic here for new platforms, using __macine_arch_type */
+        return (u32 *)DAVINCI_UART0_BASE;
+}
+
 /* PORT_16C550A, in polled non-fifo mode */
 
 static void putc(char c)
 {
-        volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+        if (!uart)
+                uart = get_uart_base();
 
         while (!(uart[UART_LSR] & UART_LSR_THRE))
                 barrier();
@@ -26,7 +39,9 @@ static void putc(char c)
 
 static inline void flush(void)
 {
-        volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+        if (!uart)
+                uart = get_uart_base();
+
         while (!(uart[UART_LSR] & UART_LSR_THRE))
                 barrier();
 }
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index a548abb513e2..49912b48b1b0 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -9,47 +9,9 @@
  */
 
 #include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
-        {
-                .virtual        = IO_VIRT,
-                .pfn            = __phys_to_pfn(IO_PHYS),
-                .length         = IO_SIZE,
-                .type           = MT_DEVICE
-        },
-};
-
-void __init davinci_map_common_io(void)
-{
-        iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
-        /* Normally devicemaps_init() would flush caches and tlb after
-         * mdesc->map_io(), but we must also do it here because of the CPU
-         * revision check below.
-         */
-        local_flush_tlb_all();
-        flush_cache_all();
-
-        /* We want to check CPU revision early for cpu_is_xxxx() macros.
-         * IO space mapping must be initialized before we can do that.
-         */
-        davinci_check_revision();
-}
 
 #define BETWEEN(p, st, sz)      ((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p, pst, vst)      ((void __iomem *)((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5a324c90e291..af92ffee8471 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -26,6 +26,7 @@
 
 #include <mach/hardware.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)            ((irq) & 0x1f)
@@ -41,18 +42,14 @@
 #define IRQ_INTPRI0_REG_OFFSET  0x0030
 #define IRQ_INTPRI7_REG_OFFSET  0x004C
 
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
 static inline unsigned int davinci_irq_readl(int offset)
 {
-        return __raw_readl(INTC_BASE + offset);
+        return __raw_readl(davinci_intc_base + offset);
 }
 
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
-        __raw_writel(value, INTC_BASE + offset);
+        __raw_writel(value, davinci_intc_base + offset);
 }
 
 /* Disable interrupt */
@@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = {
         .unmask = davinci_unmask_irq,
 };
 
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
-        [IRQ_VDINT0]            = 2,
-        [IRQ_VDINT1]            = 6,
-        [IRQ_VDINT2]            = 6,
-        [IRQ_HISTINT]           = 6,
-        [IRQ_H3AINT]            = 6,
-        [IRQ_PRVUINT]           = 6,
-        [IRQ_RSZINT]            = 6,
-        [7]                     = 7,
-        [IRQ_VENCINT]           = 6,
-        [IRQ_ASQINT]            = 6,
-        [IRQ_IMXINT]            = 6,
-        [IRQ_VLCDINT]           = 6,
-        [IRQ_USBINT]            = 4,
-        [IRQ_EMACINT]           = 4,
-        [14]                    = 7,
-        [15]                    = 7,
-        [IRQ_CCINT0]            = 5,    /* dma */
-        [IRQ_CCERRINT]          = 5,    /* dma */
-        [IRQ_TCERRINT0]         = 5,    /* dma */
-        [IRQ_TCERRINT]          = 5,    /* dma */
-        [IRQ_PSCIN]             = 7,
-        [21]                    = 7,
-        [IRQ_IDE]               = 4,
-        [23]                    = 7,
-        [IRQ_MBXINT]            = 7,
-        [IRQ_MBRINT]            = 7,
-        [IRQ_MMCINT]            = 7,
-        [IRQ_SDIOINT]           = 7,
-        [28]                    = 7,
-        [IRQ_DDRINT]            = 7,
-        [IRQ_AEMIFINT]          = 7,
-        [IRQ_VLQINT]            = 4,
-        [IRQ_TINT0_TINT12]      = 2,    /* clockevent */
-        [IRQ_TINT0_TINT34]      = 2,    /* clocksource */
-        [IRQ_TINT1_TINT12]      = 7,    /* DSP timer */
-        [IRQ_TINT1_TINT34]      = 7,    /* system tick */
-        [IRQ_PWMINT0]           = 7,
-        [IRQ_PWMINT1]           = 7,
-        [IRQ_PWMINT2]           = 7,
-        [IRQ_I2C]               = 3,
-        [IRQ_UARTINT0]          = 3,
-        [IRQ_UARTINT1]          = 3,
-        [IRQ_UARTINT2]          = 3,
-        [IRQ_SPINT0]            = 3,
-        [IRQ_SPINT1]            = 3,
-        [45]                    = 7,
-        [IRQ_DSP2ARM0]          = 4,
-        [IRQ_DSP2ARM1]          = 4,
-        [IRQ_GPIO0]             = 7,
-        [IRQ_GPIO1]             = 7,
-        [IRQ_GPIO2]             = 7,
-        [IRQ_GPIO3]             = 7,
-        [IRQ_GPIO4]             = 7,
-        [IRQ_GPIO5]             = 7,
-        [IRQ_GPIO6]             = 7,
-        [IRQ_GPIO7]             = 7,
-        [IRQ_GPIOBNK0]          = 7,
-        [IRQ_GPIOBNK1]          = 7,
-        [IRQ_GPIOBNK2]          = 7,
-        [IRQ_GPIOBNK3]          = 7,
-        [IRQ_GPIOBNK4]          = 7,
-        [IRQ_COMMTX]            = 7,
-        [IRQ_COMMRX]            = 7,
-        [IRQ_EMUINT]            = 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-        [IRQ_DM646X_VP_VERTINT0]        = 7,
-        [IRQ_DM646X_VP_VERTINT1]        = 7,
-        [IRQ_DM646X_VP_VERTINT2]        = 7,
-        [IRQ_DM646X_VP_VERTINT3]        = 7,
-        [IRQ_DM646X_VP_ERRINT]          = 7,
-        [IRQ_DM646X_RESERVED_1]         = 7,
-        [IRQ_DM646X_RESERVED_2]         = 7,
-        [IRQ_DM646X_WDINT]              = 7,
-        [IRQ_DM646X_CRGENINT0]          = 7,
-        [IRQ_DM646X_CRGENINT1]          = 7,
-        [IRQ_DM646X_TSIFINT0]           = 7,
-        [IRQ_DM646X_TSIFINT1]           = 7,
-        [IRQ_DM646X_VDCEINT]            = 7,
-        [IRQ_DM646X_USBINT]             = 7,
-        [IRQ_DM646X_USBDMAINT]          = 7,
-        [IRQ_DM646X_PCIINT]             = 7,
-        [IRQ_CCINT0]                    = 7,    /* dma */
-        [IRQ_CCERRINT]                  = 7,    /* dma */
-        [IRQ_TCERRINT0]                 = 7,    /* dma */
-        [IRQ_TCERRINT]                  = 7,    /* dma */
-        [IRQ_DM646X_TCERRINT2]          = 7,
-        [IRQ_DM646X_TCERRINT3]          = 7,
-        [IRQ_DM646X_IDE]                = 7,
-        [IRQ_DM646X_HPIINT]             = 7,
-        [IRQ_DM646X_EMACRXTHINT]        = 7,
-        [IRQ_DM646X_EMACRXINT]          = 7,
-        [IRQ_DM646X_EMACTXINT]          = 7,
-        [IRQ_DM646X_EMACMISCINT]        = 7,
-        [IRQ_DM646X_MCASP0TXINT]        = 7,
-        [IRQ_DM646X_MCASP0RXINT]        = 7,
-        [IRQ_AEMIFINT]                  = 7,
-        [IRQ_DM646X_RESERVED_3]         = 7,
-        [IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
-        [IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-        [IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-        [IRQ_TINT1_TINT34]              = 7,    /* system tick */
-        [IRQ_PWMINT0]                   = 7,
-        [IRQ_PWMINT1]                   = 7,
-        [IRQ_DM646X_VLQINT]             = 7,
-        [IRQ_I2C]                       = 7,
-        [IRQ_UARTINT0]                  = 7,
-        [IRQ_UARTINT1]                  = 7,
-        [IRQ_DM646X_UARTINT2]           = 7,
-        [IRQ_DM646X_SPINT0]             = 7,
-        [IRQ_DM646X_SPINT1]             = 7,
-        [IRQ_DM646X_DSP2ARMINT]         = 7,
-        [IRQ_DM646X_RESERVED_4]         = 7,
-        [IRQ_DM646X_PSCINT]             = 7,
-        [IRQ_DM646X_GPIO0]              = 7,
-        [IRQ_DM646X_GPIO1]              = 7,
-        [IRQ_DM646X_GPIO2]              = 7,
-        [IRQ_DM646X_GPIO3]              = 7,
-        [IRQ_DM646X_GPIO4]              = 7,
-        [IRQ_DM646X_GPIO5]              = 7,
-        [IRQ_DM646X_GPIO6]              = 7,
-        [IRQ_DM646X_GPIO7]              = 7,
-        [IRQ_DM646X_GPIOBNK0]           = 7,
-        [IRQ_DM646X_GPIOBNK1]           = 7,
-        [IRQ_DM646X_GPIOBNK2]           = 7,
-        [IRQ_DM646X_DDRINT]             = 7,
-        [IRQ_DM646X_AEMIFINT]           = 7,
-        [IRQ_COMMTX]                    = 7,
-        [IRQ_COMMRX]                    = 7,
-        [IRQ_EMUINT]                    = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-        [IRQ_DM355_CCDC_VDINT0]         = 2,
-        [IRQ_DM355_CCDC_VDINT1]         = 6,
-        [IRQ_DM355_CCDC_VDINT2]         = 6,
-        [IRQ_DM355_IPIPE_HST]           = 6,
-        [IRQ_DM355_H3AINT]              = 6,
-        [IRQ_DM355_IPIPE_SDR]           = 6,
-        [IRQ_DM355_IPIPEIFINT]          = 6,
-        [IRQ_DM355_OSDINT]              = 7,
-        [IRQ_DM355_VENCINT]             = 6,
-        [IRQ_ASQINT]                    = 6,
-        [IRQ_IMXINT]                    = 6,
-        [IRQ_USBINT]                    = 4,
-        [IRQ_DM355_RTOINT]              = 4,
-        [IRQ_DM355_UARTINT2]            = 7,
-        [IRQ_DM355_TINT6]               = 7,
-        [IRQ_CCINT0]                    = 5,    /* dma */
-        [IRQ_CCERRINT]                  = 5,    /* dma */
-        [IRQ_TCERRINT0]                 = 5,    /* dma */
-        [IRQ_TCERRINT]                  = 5,    /* dma */
-        [IRQ_DM355_SPINT2_1]            = 7,
-        [IRQ_DM355_TINT7]               = 4,
-        [IRQ_DM355_SDIOINT0]            = 7,
-        [IRQ_MBXINT]                    = 7,
-        [IRQ_MBRINT]                    = 7,
-        [IRQ_MMCINT]                    = 7,
-        [IRQ_DM355_MMCINT1]             = 7,
-        [IRQ_DM355_PWMINT3]             = 7,
-        [IRQ_DDRINT]                    = 7,
-        [IRQ_AEMIFINT]                  = 7,
-        [IRQ_DM355_SDIOINT1]            = 4,
-        [IRQ_TINT0_TINT12]              = 2,    /* clockevent */
-        [IRQ_TINT0_TINT34]              = 2,    /* clocksource */
-        [IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-        [IRQ_TINT1_TINT34]              = 7,    /* system tick */
-        [IRQ_PWMINT0]                   = 7,
-        [IRQ_PWMINT1]                   = 7,
-        [IRQ_PWMINT2]                   = 7,
-        [IRQ_I2C]                       = 3,
-        [IRQ_UARTINT0]                  = 3,
-        [IRQ_UARTINT1]                  = 3,
-        [IRQ_DM355_SPINT0_0]            = 3,
-        [IRQ_DM355_SPINT0_1]            = 3,
-        [IRQ_DM355_GPIO0]               = 3,
-        [IRQ_DM355_GPIO1]               = 7,
-        [IRQ_DM355_GPIO2]               = 4,
-        [IRQ_DM355_GPIO3]               = 4,
-        [IRQ_DM355_GPIO4]               = 7,
-        [IRQ_DM355_GPIO5]               = 7,
-        [IRQ_DM355_GPIO6]               = 7,
-        [IRQ_DM355_GPIO7]               = 7,
-        [IRQ_DM355_GPIO8]               = 7,
-        [IRQ_DM355_GPIO9]               = 7,
-        [IRQ_DM355_GPIOBNK0]            = 7,
-        [IRQ_DM355_GPIOBNK1]            = 7,
-        [IRQ_DM355_GPIOBNK2]            = 7,
-        [IRQ_DM355_GPIOBNK3]            = 7,
-        [IRQ_DM355_GPIOBNK4]            = 7,
-        [IRQ_DM355_GPIOBNK5]            = 7,
-        [IRQ_DM355_GPIOBNK6]            = 7,
-        [IRQ_COMMTX]                    = 7,
-        [IRQ_COMMRX]                    = 7,
-        [IRQ_EMUINT]                    = 7,
-};
-
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
         unsigned i;
-
-        if (cpu_is_davinci_dm644x())
-                davinci_def_priorities = dm644x_default_priorities;
-        else if (cpu_is_davinci_dm646x())
-                davinci_def_priorities = dm646x_default_priorities;
-        else if (cpu_is_davinci_dm355())
-                davinci_def_priorities = dm355_default_priorities;
+        const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
         /* Clear all interrupt requests */
         davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index bbba0b247a44..d310f579aa85 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -21,18 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
-                                unsigned long size)
-{
-        mux_table = pins;
-        pin_table_sz = size;
-
-        return 0;
-}
+#include <mach/common.h>
 
 /*
  * Sets the DAVINCI MUX register based on the table
@@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins,
 int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
         static DEFINE_SPINLOCK(mux_spin_lock);
-        void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+        void __iomem *base = soc_info->pinmux_base;
         unsigned long flags;
         const struct mux_config *cfg;
         unsigned int reg_orig = 0, reg = 0;
         unsigned int mask, warn = 0;
 
-        if (!mux_table)
+        if (!soc_info->pinmux_pins)
                 BUG();
 
-        if (index >= pin_table_sz) {
+        if (index >= soc_info->pinmux_pins_num) {
                 printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-                       index, pin_table_sz);
+                       index, soc_info->pinmux_pins_num);
                 dump_stack();
                 return -ENODEV;
         }
 
-        cfg = &mux_table[index];
+        cfg = &soc_info->pinmux_pins[index];
 
         if (cfg->name == NULL) {
                 printk(KERN_ERR "No entry for the specified index\n");
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 84171abf5f7b..a78b657e916e 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,8 +28,6 @@
 #include <mach/psc.h>
 #include <mach/mux.h>
 
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
 /* PSC register offsets */
 #define EPCPR           0x070
 #define PTCMD           0x120
@@ -42,22 +40,42 @@
 #define MDSTAT_STATE_MASK 0x1f
 
 /* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
-        void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
-        u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+        void __iomem *psc_base;
+        u32 mdstat;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+        if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+                pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+                                (int)soc_info->psc_bases, ctlr);
+                return 0;
+        }
+
+        psc_base = soc_info->psc_bases[ctlr];
+        mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 
         /* if clocked, state can be "Enable" or "SyncReset" */
         return mdstat & BIT(12);
 }
 
 /* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+                unsigned int id, char enable)
 {
         u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
-        void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+        void __iomem *psc_base;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
         u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
+        if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+                pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+                                (int)soc_info->psc_bases, ctlr);
+                return;
+        }
+
+        psc_base = soc_info->psc_bases[ctlr];
+
         mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
         mdctl &= ~MDSTAT_STATE_MASK;
         mdctl |= next_state;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 695075796522..c530c7333d0a 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
 #include <mach/serial.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
+
 #include "clock.h"
 
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
         __raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
 }
 
-static struct plat_serial8250_port serial_platform_data[] = {
-        {
-                .mapbase        = DAVINCI_UART0_BASE,
-                .irq            = IRQ_UARTINT0,
-                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-                                  UPF_IOREMAP,
-                .iotype         = UPIO_MEM,
-                .regshift       = 2,
-        },
-        {
-                .mapbase        = DAVINCI_UART1_BASE,
-                .irq            = IRQ_UARTINT1,
-                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-                                  UPF_IOREMAP,
-                .iotype         = UPIO_MEM,
-                .regshift       = 2,
-        },
-        {
-                .mapbase        = DAVINCI_UART2_BASE,
-                .irq            = IRQ_UARTINT2,
-                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-                                  UPF_IOREMAP,
-                .iotype         = UPIO_MEM,
-                .regshift       = 2,
-        },
-        {
-                .flags          = 0
-        },
-};
-
-static struct platform_device serial_device = {
-        .name                   = "serial8250",
-        .id                     = PLAT8250_DEV_PLATFORM,
-        .dev                    = {
-                .platform_data  = serial_platform_data,
-        },
-};
-
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 {
         unsigned int pwremu = 0;
@@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
                                  UART_DM646X_SCR_TX_WATERMARK);
 }
 
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
 {
         int i;
         char name[16];
         struct clk *uart_clk;
-        struct device *dev = &serial_device.dev;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+        struct device *dev = &soc_info->serial_dev->dev;
+        struct plat_serial8250_port *p = dev->platform_data;
 
         /*
          * Make sure the serial ports are muxed on at this point.
-         * You have to mux them off in device drivers later on
-         * if not needed.
+         * You have to mux them off in device drivers later on if not needed.
          */
-        for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
-                struct plat_serial8250_port *p = serial_platform_data + i;
-
-                if (!(info->enabled_uarts & (1 << i))) {
-                        p->flags = 0;
+        for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+                if (!(info->enabled_uarts & (1 << i)))
                         continue;
-                }
-
-                if (cpu_is_davinci_dm646x())
-                        p->iotype = UPIO_MEM32;
-
-                if (cpu_is_davinci_dm355()) {
-                        if (i == 2) {
-                                p->mapbase = (unsigned long)DM355_UART2_BASE;
-                                p->irq = IRQ_DM355_UARTINT2;
-                        }
-                }
 
                 sprintf(name, "uart%d", i);
                 uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info)
                         davinci_serial_reset(p);
                 }
         }
-}
 
-static int __init davinci_init(void)
-{
-        return platform_device_register(&serial_device);
+        return platform_device_register(soc_info->serial_dev);
 }
-
-arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
new file mode 100644
index 000000000000..db54b2a66b4d
--- /dev/null
+++ b/arch/arm/mach-davinci/sram.c
@@ -0,0 +1,74 @@
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+        unsigned long vaddr;
+        dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+        if (dma)
+                *dma = 0;
+        if (!sram_pool || (dma && !dma_base))
+                return NULL;
+
+        vaddr = gen_pool_alloc(sram_pool, len);
+        if (!vaddr)
+                return NULL;
+
+        if (dma)
+                *dma = dma_base + (vaddr - SRAM_VIRT);
+        return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+        gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM:  as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+        unsigned len = davinci_soc_info.sram_len;
+        int status = 0;
+
+        if (len) {
+                len = min(len, SRAM_SIZE);
+                sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+                if (!sram_pool)
+                        status = -ENOMEM;
+        }
+        if (sram_pool)
+                status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+        WARN_ON(status < 0);
+        return status;
+}
+core_initcall(sram_init);
+
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 494e01bff5c3..0884ca57bfb0 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -28,52 +29,41 @@
 #include <asm/errno.h>
 #include <mach/io.h>
 #include <mach/cputype.h>
+#include <mach/time.h>
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
 static unsigned int davinci_clock_tick_rate;
 
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE   (IO_PHYS + 0x21C00)
-
-enum {
-        T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id)    (id & 0x2)
-#define IS_TIMER0(id)    (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
-        IRQ_TINT0_TINT12,
-        IRQ_TINT0_TINT34,
-        IRQ_TINT1_TINT12,
-        IRQ_TINT1_TINT34,
-};
-
 /*
  * This driver configures the 2 64-bit count-up timers as 4 independent
  * 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
  */
-#define TID_CLOCKEVENT  T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+        TID_CLOCKEVENT,
+        TID_CLOCKSOURCE,
+};
 
 /* Timer register offsets */
-#define PID12                        0x0
-#define TIM12                        0x10
-#define TIM34                        0x14
-#define PRD12                        0x18
-#define PRD34                        0x1c
-#define TCR                          0x20
-#define TGCR                         0x24
-#define WDTCR                        0x28
+#define PID12                   0x0
+#define TIM12                   0x10
+#define TIM34                   0x14
+#define PRD12                   0x18
+#define PRD34                   0x1c
+#define TCR                     0x20
+#define TGCR                    0x24
+#define WDTCR                   0x28
+
+/* Offsets of the 8 compare registers */
+#define CMP12_0                 0x60
+#define CMP12_1                 0x64
+#define CMP12_2                 0x68
+#define CMP12_3                 0x6c
+#define CMP12_4                 0x70
+#define CMP12_5                 0x74
+#define CMP12_6                 0x78
+#define CMP12_7                 0x7c
 
 /* Timer register bitfields */
 #define TCR_ENAMODE_DISABLE          0x0
@@ -105,6 +95,7 @@ struct timer_s {
         unsigned int id;
         unsigned long period;
         unsigned long opts;
+        unsigned long flags;
         void __iomem *base;
         unsigned long tim_off;
         unsigned long prd_off;
@@ -114,30 +105,58 @@ struct timer_s {
 static struct timer_s timers[];
 
 /* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED   0x00
-#define TIMER_OPTS_ONESHOT    0x01
-#define TIMER_OPTS_PERIODIC   0x02
+#define TIMER_OPTS_DISABLED             0x01
+#define TIMER_OPTS_ONESHOT              0x02
+#define TIMER_OPTS_PERIODIC             0x04
+#define TIMER_OPTS_STATE_MASK           0x07
+
+#define TIMER_OPTS_USE_COMPARE          0x80000000
+#define USING_COMPARE(t)                ((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+        [T0_BOT]        = "timer0_0",
+        [T0_TOP]        = "timer0_1",
+        [T1_BOT]        = "timer1_0",
+        [T1_TOP]        = "timer1_1",
+};
 
 static int timer32_config(struct timer_s *t)
 {
-        u32 tcr = __raw_readl(t->base + TCR);
-
-        /* disable timer */
-        tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-        __raw_writel(tcr, t->base + TCR);
-
-        /* reset counter to zero, set new period */
-        __raw_writel(0, t->base + t->tim_off);
-        __raw_writel(t->period, t->base + t->prd_off);
-
-        /* Set enable mode */
-        if (t->opts & TIMER_OPTS_ONESHOT) {
-                tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-        } else if (t->opts & TIMER_OPTS_PERIODIC) {
-                tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+        u32 tcr;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+        if (USING_COMPARE(t)) {
+                struct davinci_timer_instance *dtip =
+                                soc_info->timer_info->timers;
+                int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
+
+                /*
+                 * Next interrupt should be the current time reg value plus
+                 * the new period (using 32-bit unsigned addition/wrapping
+                 * to 0 on overflow).  This assumes that the clocksource
+                 * is setup to count to 2^32-1 before wrapping around to 0.
+                 */
+                __raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+                        t->base + dtip[event_timer].cmp_off);
+        } else {
+                tcr = __raw_readl(t->base + TCR);
+
+                /* disable timer */
+                tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+                __raw_writel(tcr, t->base + TCR);
+
+                /* reset counter to zero, set new period */
+                __raw_writel(0, t->base + t->tim_off);
+                __raw_writel(t->period, t->base + t->prd_off);
+
+                /* Set enable mode */
+                if (t->opts & TIMER_OPTS_ONESHOT)
+                        tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+                else if (t->opts & TIMER_OPTS_PERIODIC)
+                        tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+                __raw_writel(tcr, t->base + TCR);
         }
-
-        __raw_writel(tcr, t->base + TCR);
         return 0;
 }
 
@@ -182,13 +201,14 @@ static struct timer_s timers[] = {
 
 static void __init timer_init(void)
 {
-        u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+        struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
         int i;
 
         /* Global init of each 64-bit timer as a whole */
         for(i=0; i<2; i++) {
                 u32 tgcr;
-                void __iomem *base = IO_ADDRESS(phys_bases[i]);
+                void __iomem *base = dtip[i].base;
 
                 /* Disabled, Internal clock source */
                 __raw_writel(0, base + TCR);
@@ -214,33 +234,33 @@ static void __init timer_init(void)
         /* Init of each timer as a 32-bit timer */
         for (i=0; i< ARRAY_SIZE(timers); i++) {
                 struct timer_s *t = &timers[i];
-                u32 phys_base;
-
-                if (t->name) {
-                        t->id = i;
-                        phys_base = (IS_TIMER1(t->id) ?
-                               DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
-                        t->base = IO_ADDRESS(phys_base);
-
-                        if (IS_TIMER_BOT(t->id)) {
-                                t->enamode_shift = 6;
-                                t->tim_off = TIM12;
-                                t->prd_off = PRD12;
-                        } else {
-                                t->enamode_shift = 22;
-                                t->tim_off = TIM34;
-                                t->prd_off = PRD34;
-                        }
-
-                        /* Register interrupt */
-                        t->irqaction.name = t->name;
-                        t->irqaction.dev_id = (void *)t;
-                        if (t->irqaction.handler != NULL) {
-                                setup_irq(timer_irqs[t->id], &t->irqaction);
-                        }
-
-                        timer32_config(&timers[i]);
+                int timer = ID_TO_TIMER(t->id);
+                u32 irq;
+
+                t->base = dtip[timer].base;
+
+                if (IS_TIMER_BOT(t->id)) {
+                        t->enamode_shift = 6;
+                        t->tim_off = TIM12;
+                        t->prd_off = PRD12;
+                        irq = dtip[timer].bottom_irq;
+                } else {
+                        t->enamode_shift = 22;
+                        t->tim_off = TIM34;
+                        t->prd_off = PRD34;
+                        irq = dtip[timer].top_irq;
+                }
+
+                /* Register interrupt */
+                t->irqaction.name = t->name;
+                t->irqaction.dev_id = (void *)t;
+
+                if (t->irqaction.handler != NULL) {
+                        irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+                        setup_irq(irq, &t->irqaction);
                 }
+
+                timer32_config(&timers[i]);
         }
 }
 
@@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_davinci = {
-        .name           = "timer0_1",
         .rating         = 300,
         .read           = read_cycles,
         .mask           = CLOCKSOURCE_MASK(32),
@@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode,
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
                 t->period = davinci_clock_tick_rate / (HZ);
-                t->opts = TIMER_OPTS_PERIODIC;
+                t->opts &= ~TIMER_OPTS_STATE_MASK;
+                t->opts |= TIMER_OPTS_PERIODIC;
                 timer32_config(t);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
-                t->opts = TIMER_OPTS_ONESHOT;
+                t->opts &= ~TIMER_OPTS_STATE_MASK;
+                t->opts |= TIMER_OPTS_ONESHOT;
                 break;
         case CLOCK_EVT_MODE_UNUSED:
         case CLOCK_EVT_MODE_SHUTDOWN:
-                t->opts = TIMER_OPTS_DISABLED;
+                t->opts &= ~TIMER_OPTS_STATE_MASK;
+                t->opts |= TIMER_OPTS_DISABLED;
                 break;
         case CLOCK_EVT_MODE_RESUME:
                 break;
@@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_davinci = {
-        .name           = "timer0_0",
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
         .shift          = 32,
         .set_next_event = davinci_set_next_event,
@@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = {
 static void __init davinci_timer_init(void)
 {
         struct clk *timer_clk;
-
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+        unsigned int clockevent_id;
+        unsigned int clocksource_id;
         static char err[] __initdata = KERN_ERR
                 "%s: can't register clocksource!\n";
 
+        clockevent_id = soc_info->timer_info->clockevent_id;
+        clocksource_id = soc_info->timer_info->clocksource_id;
+
+        timers[TID_CLOCKEVENT].id = clockevent_id;
+        timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+        /*
+         * If using same timer for both clock events & clocksource,
+         * a compare register must be used to generate an event interrupt.
+         * This is equivalent to a oneshot timer only (not periodic).
+         */
+        if (clockevent_id == clocksource_id) {
+                struct davinci_timer_instance *dtip =
+                                soc_info->timer_info->timers;
+                int event_timer = ID_TO_TIMER(clockevent_id);
+
+                /* Only bottom timers can use compare regs */
+                if (IS_TIMER_TOP(clockevent_id))
+                        pr_warning("davinci_timer_init: Invalid use"
+                                " of system timers.  Results unpredictable.\n");
+                else if ((dtip[event_timer].cmp_off == 0)
+                                || (dtip[event_timer].cmp_irq == 0))
+                        pr_warning("davinci_timer_init:  Invalid timer instance"
+                                " setup.  Results unpredictable.\n");
+                else {
+                        timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+                        clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+                }
+        }
+
         /* init timer hw */
         timer_init();
 
@@ -325,6 +378,7 @@ static void __init davinci_timer_init(void)
         davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
         /* setup clocksource */
+        clocksource_davinci.name = id_to_name[clocksource_id];
         clocksource_davinci.mult =
                 clocksource_khz2mult(davinci_clock_tick_rate/1000,
                                      clocksource_davinci.shift);
@@ -332,12 +386,12 @@ static void __init davinci_timer_init(void)
                 printk(err, clocksource_davinci.name);
 
         /* setup clockevent */
+        clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
         clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
                                          clockevent_davinci.shift);
         clockevent_davinci.max_delta_ns =
                 clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-        clockevent_davinci.min_delta_ns =
-                clockevent_delta2ns(1, &clockevent_davinci);
+        clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
         clockevent_davinci.cpumask = cpumask_of(0);
         clockevents_register_device(&clockevent_davinci);
@@ -349,15 +403,14 @@ struct sys_timer davinci_timer = {
 
 
 /* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
         u32 tgcr, wdtcr;
-        void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
-        struct device dev;
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+        void __iomem *base = soc_info->wdt_base;
         struct clk *wd_clk;
-        char *name = "watchdog";
 
-        dev_set_name(&dev, name);
-        wd_clk = clk_get(&dev, NULL);
+        wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
         if (WARN_ON(IS_ERR(wd_clk)))
                 return;
         clk_enable(wd_clk);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486f858a..c535e8805a3b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -450,10 +450,19 @@ static struct amba_device uart3_device = {
 };
 
 
+static struct resource ep93xx_rtc_resource[] = {
+        {
+                .start          = EP93XX_RTC_PHYS_BASE,
+                .end            = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
 static struct platform_device ep93xx_rtc_device = {
-       .name           = "ep93xx-rtc",
-       .id             = -1,
-       .num_resources  = 0,
+        .name           = "ep93xx-rtc",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(ep93xx_rtc_resource),
+        .resource       = ep93xx_rtc_resource,
 };
 
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 1732de7629a5..420f71b85123 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,6 +147,7 @@
 #define EP93XX_PWM_BASE                 (EP93XX_APB_VIRT_BASE + 0x00110000)
 
 #define EP93XX_RTC_BASE                 (EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE            (EP93XX_APB_PHYS_BASE + 0x00120000)
 
 #define EP93XX_SYSCON_BASE              (EP93XX_APB_VIRT_BASE + 0x00130000)
 #define EP93XX_SYSCON_REG(x)            (EP93XX_SYSCON_BASE + (x))
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194ac6eb..000000000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
-        depends on ARCH_IMX
-
-config ARCH_MX1ADS
-        bool "mx1ads"
-        depends on ARCH_IMX
-        select ISA
-        help
-          Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e795a9..000000000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y                   += irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX)      += cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS)      +=  $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5b8081..000000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-    zreladdr-$(CONFIG_ARCH_MX1ADS)      := 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332aeb942e..000000000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
-        struct list_head node;
-        const char *name;
-        unsigned long (*get_rate)(void);
-};
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-        unsigned long long ll;
-        unsigned long quot;
-
-        u32 mfi = (pll >> 10) & 0xf;
-        u32 mfn = pll & 0x3ff;
-        u32 mfd = (pll >> 16) & 0x3ff;
-        u32 pd =  (pll >> 26) & 0xf;
-
-        mfi = mfi <= 5 ? 5 : mfi;
-
-        ll = 2 * (unsigned long long)f_ref *
-                ((mfi << 16) + (mfn << 16) / (mfd + 1));
-        quot = (pd + 1) * (1 << 16);
-        ll += quot / 2;
-        do_div(ll, quot);
-        return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
-        u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-        return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
-        return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
-        return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
-        return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
-        return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
-        return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
-        .name = "system_clk",
-        .get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
-        .name = "hclk",
-        .get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
-        .name = "mcu_clk",
-        .get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
-        .name = "perclk1",
-        .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
-        .name = "uart_clk",
-        .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
-        .name = "perclk2",
-        .get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
-        .name = "perclk3",
-        .get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
-        &clk_perclk1,
-        &clk_perclk2,
-        &clk_perclk3,
-        &clk_system_clk,
-        &clk_hclk,
-        &clk_mcu_clk,
-        &clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-        struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-        mutex_lock(&clocks_mutex);
-        list_for_each_entry(p, &clocks, node) {
-                if (!strcmp(p->name, id)) {
-                        clk = p;
-                        goto found;
-                }
-        }
-
-found:
-        mutex_unlock(&clocks_mutex);
-
-        return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-        return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-        return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
-        int i;
-
-        mutex_lock(&clocks_mutex);
-        for (i = 0; i < ARRAY_SIZE(clks); i++)
-                list_add(&clks[i]->node, &clocks);
-        mutex_unlock(&clocks_mutex);
-
-        return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca0af67..000000000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE      0xC0000000
-#define CR_920T_FASTBUS_MODE    0x00000000
-#define CR_920T_ASYNC_MODE      0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
-        adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
-        adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
-        unsigned long flags;
-
-        if (mpctl0 == 0) {
-                local_irq_save(flags);
-                CSCR &= ~CSCR_MPEN;
-                local_irq_restore(flags);
-                return;
-        }
-
-        local_irq_save(flags);
-        MPCTL0 = mpctl0;
-        CSCR |= CSCR_MPEN;
-        local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl:  pointer to location assigned by new PLL control register value
- * @cur_mpctl:  current PLL control register parameters
- * @f_ref:      reference source frequency Hz
- * @freq:       required frequency in Hz
- * @relation:   is one of %CPUFREQ_RELATION_L (supremum)
- *              and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
-        u32 mfi;
-        u32 mfn;
-        u32 mfd;
-        u32 pd;
-        unsigned long long ll;
-        long l;
-        long quot;
-
-        /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
-        /*  PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
-        if (cur_mpctl) {
-                mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
-                pd =  ((cur_mpctl >> 26) & 0xf) + 1;
-        } else {
-                pd=2; mfd=313;
-        }
-
-        /* pd=2; mfd=313; mfi=8; mfn=183; */
-        /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
-        quot = (f_ref + (1 << 9)) >> 10;
-        l = (freq * pd + quot) / (2 * quot);
-        mfi = l >> 10;
-        mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
-        mfd -= 1;
-        pd -= 1;
-
-        *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
-                | ((pd & 0xf) << 26);
-
-        ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-        quot = (pd+1) * (1<<16);
-        ll += quot / 2;
-        do_div(ll, quot);
-        freq = ll;
-
-        pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
-                pd, mfd, mfi, mfn, freq);
-
-        return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
-        if (policy->cpu != 0)
-                return -EINVAL;
-
-        cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-        return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
-        unsigned int freq;
-        unsigned int cr;
-        unsigned int cscr;
-        unsigned int bclk_div;
-
-        if (cpu)
-                return 0;
-
-        cscr = CSCR;
-        bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
-        cr = get_cr();
-
-        if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-                freq = clk_get_rate(system_clk);
-                freq = (freq + bclk_div/2) / bclk_div;
-        } else {
-                freq = clk_get_rate(mcu_clk);
-                if (cscr & CSCR_MPU_PRESC)
-                        freq /= 2;
-        }
-
-        freq = (freq + 500) / 1000;
-
-        return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
-                          unsigned int target_freq,
-                          unsigned int relation)
-{
-        struct cpufreq_freqs freqs;
-        u32 mpctl0 = 0;
-        u32 cscr;
-        unsigned long flags;
-        long freq;
-        long sysclk;
-        unsigned int bclk_div = bclk_div_at_boot;
-
-        /*
-         * Some governors do not respects CPU and policy lower limits
-         * which leads to bad things (division by zero etc), ensure
-         * that such things do not happen.
-         */
-        if(target_freq < policy->cpuinfo.min_freq)
-                target_freq = policy->cpuinfo.min_freq;
-
-        if(target_freq < policy->min)
-                target_freq = policy->min;
-
-        freq = target_freq * 1000;
-
-        pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
-                        freq, mpctl0_at_boot);
-
-        sysclk = clk_get_rate(system_clk);
-
-        if (freq > sysclk / bclk_div_at_boot + 1000000) {
-                freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
-                if (freq < 0) {
-                        printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
-                        return -EINVAL;
-                }
-        } else {
-                if(freq + 1000 < sysclk) {
-                        if (relation == CPUFREQ_RELATION_L)
-                                bclk_div = (sysclk - 1000) / freq;
-                        else
-                                bclk_div = (sysclk + freq + 1000) / freq;
-
-                        if(bclk_div > 16)
-                                bclk_div = 16;
-                        if(bclk_div < bclk_div_at_boot)
-                                bclk_div = bclk_div_at_boot;
-                }
-                freq = (sysclk + bclk_div / 2) / bclk_div;
-        }
-
-        freqs.old = imx_get_speed(0);
-        freqs.new = (freq + 500) / 1000;
-        freqs.cpu = 0;
-        freqs.flags = 0;
-
-        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-        local_irq_save(flags);
-
-        imx_set_fastbus_mode();
-
-        imx_set_mpctl0(mpctl0);
-
-        cscr = CSCR;
-        cscr &= ~CSCR_BCLK_DIV;
-        cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
-        CSCR = cscr;
-
-        if(mpctl0) {
-                CSCR |= CSCR_MPLL_RESTART;
-
-                /* Wait until MPLL is stabilized */
-                while( CSCR & CSCR_MPLL_RESTART );
-
-                imx_set_async_mode();
-        }
-
-        local_irq_restore(flags);
-
-        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-        pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
-                        freq, mpctl0? "MPLL": "SPLL");
-
-        return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-        printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
-        if (policy->cpu != 0)
-                return -EINVAL;
-
-        policy->cur = policy->min = policy->max = imx_get_speed(0);
-        policy->cpuinfo.min_freq = 8000;
-        policy->cpuinfo.max_freq = 200000;
-         /* Manual states, that PLL stabilizes in two CLK32 periods */
-        policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
-        return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
-        .flags          = CPUFREQ_STICKY,
-        .verify         = imx_verify_speed,
-        .target         = imx_set_target,
-        .get            = imx_get_speed,
-        .init           = imx_cpufreq_driver_init,
-        .name           = "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
-        bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
-        mpctl0_at_boot = 0;
-
-        system_clk = clk_get(NULL, "system_clk");
-        if (IS_ERR(system_clk))
-                return PTR_ERR(system_clk);
-
-        mcu_clk = clk_get(NULL, "mcu_clk");
-        if (IS_ERR(mcu_clk)) {
-                clk_put(system_clk);
-                return PTR_ERR(mcu_clk);
-        }
-
-        if((CSCR & CSCR_MPEN) &&
-           ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
-                mpctl0_at_boot = MPCTL0;
-
-        return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583eece0..000000000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/dma.c
- *
- *  imx DMA registration and IRQ dispatching
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- *             initial version heavily inspired by
- *             linux/arch/arm/mach-pxa/dma.c
- *
- *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Changed to support scatter gather DMA
- *             by taking Russell's code from RiscPC
- *
- *  2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-        unsigned int nextcount;
-        unsigned int nextaddr;
-
-        if (!imxdma->name) {
-                printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-                       __func__, dma_ch);
-                return 0;
-        }
-
-        imxdma->resbytes -= lastcount;
-
-        if (!imxdma->sg) {
-                pr_debug("imxdma%d: no sg data\n", dma_ch);
-                return 0;
-        }
-
-        imxdma->sgbc += lastcount;
-        if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
-                if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
-                        pr_debug("imxdma%d: sg transfer limit reached\n",
-                                 dma_ch);
-                        imxdma->sgcount=0;
-                        imxdma->sg = NULL;
-                        return 0;
-                } else {
-                        imxdma->sgcount--;
-                        imxdma->sg++;
-                        imxdma->sgbc = 0;
-                }
-        }
-        nextcount = imxdma->sg->length - imxdma->sgbc;
-        nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
-        if(imxdma->resbytes < nextcount)
-                nextcount = imxdma->resbytes;
-
-        if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-                DAR(dma_ch) = nextaddr;
-        else
-                SAR(dma_ch) = nextaddr;
-
-        CNTR(dma_ch) = nextcount;
-        pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
-                 dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
-        return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
-                      struct scatterlist *sg, unsigned int sgcount)
-{
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-        imxdma->sg = sg;
-        imxdma->sgcount = sgcount;
-        imxdma->sgbc = 0;
-        return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *              to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- *              Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-                     unsigned int dma_length, unsigned int dev_addr,
-                     unsigned int dmamode)
-{
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-        imxdma->sg = NULL;
-        imxdma->sgcount = 0;
-        imxdma->dma_mode = dmamode;
-        imxdma->resbytes = dma_length;
-
-        if (!dma_address) {
-                printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-                       dma_ch);
-                return -EINVAL;
-        }
-
-        if (!dma_length) {
-                printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-                       dma_ch);
-                return -EINVAL;
-        }
-
-        if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-                pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
-                        dma_ch, (unsigned int)dma_address, dma_length,
-                        dev_addr);
-                SAR(dma_ch) = dev_addr;
-                DAR(dma_ch) = (unsigned int)dma_address;
-        } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-                pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
-                        dma_ch, (unsigned int)dma_address, dma_length,
-                        dev_addr);
-                SAR(dma_ch) = (unsigned int)dma_address;
-                DAR(dma_ch) = dev_addr;
-        } else {
-                printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-                       dma_ch);
-                return -EINVAL;
-        }
-
-        CNTR(dma_ch) = dma_length;
-
-        return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-                 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-                 unsigned int dev_addr, unsigned int dmamode)
-{
-        int res;
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-        imxdma->sg = NULL;
-        imxdma->sgcount = 0;
-        imxdma->dma_mode = dmamode;
-        imxdma->resbytes = dma_length;
-
-        if (!sg || !sgcount) {
-                printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
-                       dma_ch);
-                return -EINVAL;
-        }
-
-        if (!sg->length) {
-                printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-                       dma_ch);
-                return -EINVAL;
-        }
-
-        if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-                pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
-                        dma_ch, sg, sgcount, dma_length, dev_addr);
-                SAR(dma_ch) = dev_addr;
-        } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-                pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
-                        dma_ch, sg, sgcount, dma_length, dev_addr);
-                DAR(dma_ch) = dev_addr;
-        } else {
-                printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-                       dma_ch);
-                return -EINVAL;
-        }
-
-        res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
-        if (res <= 0) {
-                printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
-                return -EINVAL;
-        }
-
-        return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *              ends successfully
- * @err_handler: the pointer to the function called if the premature
- *              end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-                       void (*irq_handler) (int, void *),
-                       void (*err_handler) (int, void *, int),
-                       void *data)
-{
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-        unsigned long flags;
-
-        if (!imxdma->name) {
-                printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-                       __func__, dma_ch);
-                return -ENODEV;
-        }
-
-        local_irq_save(flags);
-        DISR = (1 << dma_ch);
-        imxdma->irq_handler = irq_handler;
-        imxdma->err_handler = err_handler;
-        imxdma->data = data;
-        local_irq_restore(flags);
-        return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-        unsigned long flags;
-
-        pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
-        if (!imxdma->name) {
-                printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-                       __func__, dma_ch);
-                return;
-        }
-
-        local_irq_save(flags);
-        DISR = (1 << dma_ch);
-        DIMR &= ~(1 << dma_ch);
-        CCR(dma_ch) |= CCR_CEN;
-        local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
-        unsigned long flags;
-
-        pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
-        local_irq_save(flags);
-        DIMR |= (1 << dma_ch);
-        CCR(dma_ch) &= ~CCR_CEN;
-        DISR = (1 << dma_ch);
-        local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-        unsigned long flags;
-
-        /* basic sanity checks */
-        if (!name)
-                return -EINVAL;
-
-        if (dma_ch >= IMX_DMA_CHANNELS) {
-                printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-                       __func__, dma_ch);
-                return -EINVAL;
-        }
-
-        local_irq_save(flags);
-        if (imxdma->name) {
-                local_irq_restore(flags);
-                return -ENODEV;
-        }
-
-        imxdma->name = name;
-        imxdma->irq_handler = NULL;
-        imxdma->err_handler = NULL;
-        imxdma->data = NULL;
-        imxdma->sg = NULL;
-        local_irq_restore(flags);
-        return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
-        unsigned long flags;
-        struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-        if (!imxdma->name) {
-                printk(KERN_CRIT
-                       "%s: trying to free channel %d which is already freed\n",
-                       __func__, dma_ch);
-                return;
-        }
-
-        local_irq_save(flags);
-        /* Disable interrupts */
-        DIMR |= (1 << dma_ch);
-        CCR(dma_ch) &= ~CCR_CEN;
-        imxdma->name = NULL;
-        local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
-        int i;
-        int best;
-
-        switch (prio) {
-        case (DMA_PRIO_HIGH):
-                best = 8;
-                break;
-        case (DMA_PRIO_MEDIUM):
-                best = 4;
-                break;
-        case (DMA_PRIO_LOW):
-        default:
-                best = 0;
-                break;
-        }
-
-        for (i = best; i < IMX_DMA_CHANNELS; i++) {
-                if (!imx_dma_request(i, name)) {
-                        return i;
-                }
-        }
-
-        for (i = best - 1; i >= 0; i--) {
-                if (!imx_dma_request(i, name)) {
-                        return i;
-                }
-        }
-
-        printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-        return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-        int i, disr = DISR;
-        struct imx_dma_channel *channel;
-        unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
-        int errcode;
-
-        DISR = disr & err_mask;
-        for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-                if(!(err_mask & (1 << i)))
-                        continue;
-                channel = &imx_dma_channels[i];
-                errcode = 0;
-
-                if (DBTOSR & (1 << i)) {
-                        DBTOSR = (1 << i);
-                        errcode |= IMX_DMA_ERR_BURST;
-                }
-                if (DRTOSR & (1 << i)) {
-                        DRTOSR = (1 << i);
-                        errcode |= IMX_DMA_ERR_REQUEST;
-                }
-                if (DSESR & (1 << i)) {
-                        DSESR = (1 << i);
-                        errcode |= IMX_DMA_ERR_TRANSFER;
-                }
-                if (DBOSR & (1 << i)) {
-                        DBOSR = (1 << i);
-                        errcode |= IMX_DMA_ERR_BUFFER;
-                }
-
-                /*
-                 * The cleaning of @sg field would be questionable
-                 * there, because its value can help to compute
-                 * remaining/transferred bytes count in the handler
-                 */
-                /*imx_dma_channels[i].sg = NULL;*/
-
-                if (channel->name && channel->err_handler) {
-                        channel->err_handler(i, channel->data, errcode);
-                        continue;
-                }
-
-                imx_dma_channels[i].sg = NULL;
-
-                printk(KERN_WARNING
-                       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-                       i, channel->name,
-                       errcode&IMX_DMA_ERR_BURST?    " burst":"",
-                       errcode&IMX_DMA_ERR_REQUEST?  " request":"",
-                       errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
-                       errcode&IMX_DMA_ERR_BUFFER?   " buffer":"");
-        }
-        return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-        int i, disr = DISR;
-
-        pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-                     disr);
-
-        DISR = disr;
-        for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-                if (disr & (1 << i)) {
-                        struct imx_dma_channel *channel = &imx_dma_channels[i];
-                        if (channel->name) {
-                                if (imx_dma_sg_next(i, CNTR(i))) {
-                                        CCR(i) &= ~CCR_CEN;
-                                        mb();
-                                        CCR(i) |= CCR_CEN;
-                                } else {
-                                        if (channel->irq_handler)
-                                                channel->irq_handler(i,
-                                                        channel->data);
-                                }
-                        } else {
-                                /*
-                                 * IRQ for an unregistered DMA channel:
-                                 * let's clear the interrupts and disable it.
-                                 */
-                                printk(KERN_WARNING
-                                       "spurious IRQ for DMA channel %d\n", i);
-                        }
-                }
-        }
-        return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
-        int ret;
-        int i;
-
-        /* reset DMA module */
-        DCR = DCR_DRST;
-
-        ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-        if (ret) {
-                printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-                return ret;
-        }
-
-        ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-        if (ret) {
-                printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-                free_irq(DMA_INT, NULL);
-        }
-
-        /* enable DMA module */
-        DCR = DCR_DEN;
-
-        /* clear all interrupts */
-        DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
-        /* enable interrupts */
-        DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
-        for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-                imx_dma_channels[i].sg = NULL;
-                imx_dma_channels[i].dma_num = i;
-        }
-
-        return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739ee127..000000000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
-        unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-        unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-        unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-        unsigned int tmp;
-
-        /* Pullup enable */
-        if(gpio_mode & GPIO_PUEN)
-                PUEN(port) |= (1<<pin);
-        else
-                PUEN(port) &= ~(1<<pin);
-
-        /* Data direction */
-        if(gpio_mode & GPIO_OUT)
-                DDIR(port) |= 1<<pin;
-        else
-                DDIR(port) &= ~(1<<pin);
-
-        /* Primary / alternate function */
-        if(gpio_mode & GPIO_AF)
-                GPR(port) |= (1<<pin);
-        else
-                GPR(port) &= ~(1<<pin);
-
-        /* use as gpio? */
-        if(gpio_mode &  GPIO_GIUS)
-                GIUS(port) |= (1<<pin);
-        else
-                GIUS(port) &= ~(1<<pin);
-
-        /* Output / input configuration */
-        /* FIXME: I'm not very sure about OCR and ICONF, someone
-         * should have a look over it
-         */
-        if(pin<16) {
-                tmp = OCR1(port);
-                tmp &= ~( 3<<(pin*2));
-                tmp |= (ocr << (pin*2));
-                OCR1(port) = tmp;
-
-                ICONFA1(port) &= ~( 3<<(pin*2));
-                ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-                ICONFB1(port) &= ~( 3<<(pin*2));
-                ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-        } else {
-                tmp = OCR2(port);
-                tmp &= ~( 3<<((pin-16)*2));
-                tmp |= (ocr << ((pin-16)*2));
-                OCR2(port) = tmp;
-
-                ICONFA2(port) &= ~( 3<<((pin-16)*2));
-                ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
-                ICONFB2(port) &= ~( 3<<((pin-16)*2));
-                ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
-        }
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
-        if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
-                printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
-                        gpio, label ? label : "?");
-                return -EINVAL;
-        }
-
-        if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
-                printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
-                        gpio, label ? label : "?");
-                return -EBUSY;
-        }
-
-        return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
-        if(gpio >= (GPIO_PORT_MAX + 1) * 32)
-                return;
-
-        clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
-        imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
-        return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
-        imx_gpio_set_value(gpio, value);
-        imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
-        return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-                                int alloc_mode, const char *label)
-{
-        const int *p = pin_list;
-        int i;
-        unsigned gpio;
-        unsigned mode;
-
-        for (i = 0; i < count; i++) {
-                gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-                mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-                if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-                        goto setup_error;
-
-                if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
-                        imx_gpio_free(gpio);
-                else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
-                        if (imx_gpio_request(gpio, label))
-                                if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-                                        goto setup_error;
-
-                if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
-                                    IMX_GPIO_ALLOC_MODE_RELEASE)))
-                        imx_gpio_mode(gpio | mode);
-
-                p++;
-        }
-        return 0;
-
-setup_error:
-        if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
-                         IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-                return -EINVAL;
-
-        while (p != pin_list) {
-                p--;
-                gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-                imx_gpio_free(gpio);
-        }
-
-        return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
-        imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
-        return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
-        if (irq < IRQ_GPIOA(0))
-                return -EINVAL;
-        return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
-        [0] = {
-                .start  = 0x00214000,
-                .end    = 0x002140FF,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = (SDHC_INT),
-                .end    = (SDHC_INT),
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
-        .name           = "imx-mmc",
-        .id             = 0,
-        .dev            = {
-                .dma_mask = &imxmmmc_dmamask,
-                .coherent_dma_mask = 0xffffffff,
-        },
-        .num_resources  = ARRAY_SIZE(imx_mmc_resources),
-        .resource       = imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
-        imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
-        &imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
-        {
-                .virtual        = IMX_IO_BASE,
-                .pfn            = __phys_to_pfn(IMX_IO_PHYS),
-                .length         = IMX_IO_SIZE,
-                .type           = MT_DEVICE
-        }
-};
-
-void __init
-imx_map_io(void)
-{
-        iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
-        return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e4bef3..000000000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/generic.h
- *
- * Author:      Sascha Hauer <sascha@saschahauer.de>
- * Copyright:   Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbfe633..000000000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-                .macro  addruart,rx
-                mrc     p15, 0, \rx, c1, c0
-                tst     \rx, #1                 @ MMU enabled?
-                moveq   \rx, #0x00000000        @ physical
-                movne   \rx, #0xe0000000        @ virtual
-                orreq   \rx, \rx, #0x00200000   @ physical
-                orr     \rx, \rx, #0x00006000   @ UART1 offset
-                .endm
-
-                .macro  senduart,rd,rx
-                str     \rd, [\rx, #0x40]       @ TXDATA
-                .endm
-
-                .macro  waituart,rd,rx
-                .endm
-
-                .macro  busyuart,rd,rx
-1002:           ldr     \rd, [\rx, #0x98]       @ SR2
-                tst     \rd, #1 << 3            @ TXDC
-                beq     1002b                   @ wait until transmit done
-                .endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c730f2..000000000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
-        DMA_PRIO_HIGH = 0,
-        DMA_PRIO_MEDIUM = 1,
-        DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T        2
-#define DMA_REQ_UART3_R        3
-#define DMA_REQ_SSI2_T         4
-#define DMA_REQ_SSI2_R         5
-#define DMA_REQ_CSI_STAT       6
-#define DMA_REQ_CSI_R          7
-#define DMA_REQ_MSHC           8
-#define DMA_REQ_DSPA_DCT_DOUT  9
-#define DMA_REQ_DSPA_DCT_DIN  10
-#define DMA_REQ_DSPA_MAC      11
-#define DMA_REQ_EXT           12
-#define DMA_REQ_SDHC          13
-#define DMA_REQ_SPI1_R        14
-#define DMA_REQ_SPI1_T        15
-#define DMA_REQ_SSI_T         16
-#define DMA_REQ_SSI_R         17
-#define DMA_REQ_ASP_DAC       18
-#define DMA_REQ_ASP_ADC       19
-#define DMA_REQ_USP_EP(x)    (20+(x))
-#define DMA_REQ_SPI2_R        26
-#define DMA_REQ_SPI2_T        27
-#define DMA_REQ_UART2_T       28
-#define DMA_REQ_UART2_R       29
-#define DMA_REQ_UART1_T       30
-#define DMA_REQ_UART1_R       31
-
-#endif                          /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679f7766..000000000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  get_irqnr_preamble, base, tmp
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
-#define AITC_NIVECSR   0x40
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \base, =IO_ADDRESS(IMX_AITC_BASE)
-                @ Load offset & priority of the highest priority
-                @ interrupt pending.
-                ldr     \irqstat, [\base, #AITC_NIVECSR]
-                @ Shift off the priority leaving the offset or
-                @ "interrupt number", use arithmetic shift to
-                @ transform illegal source (0xffff) as -1
-                mov     \irqnr, \irqstat, asr #16
-                adds    \tmp, \irqnr, #1
-                .endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f82922..000000000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL      0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC    1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC   2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY  4
-#define IMX_GPIO_ALLOC_MODE_RELEASE     8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-                                        int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-        return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-        unsigned long flags;
-
-        raw_local_irq_save(flags);
-        if(value)
-                DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-        else
-                DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-        raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-        if(__builtin_constant_p(gpio))
-                imx_gpio_set_value_inline(gpio, value);
-        else
-                __imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-        return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-        might_sleep();
-
-        imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-        return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-        return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-        return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-        imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>           /* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-        return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-        return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e724c75..000000000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)       (*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS             0x00200000
-#define IMX_IO_SIZE             0x00100000
-#define IMX_IO_BASE             0xe0000000
-
-#define IMX_CS0_PHYS            0x10000000
-#define IMX_CS0_SIZE            0x02000000
-#define IMX_CS0_VIRT            0xe8000000
-
-#define IMX_CS1_PHYS            0x12000000
-#define IMX_CS1_SIZE            0x01000000
-#define IMX_CS1_VIRT            0xea000000
-
-#define IMX_CS2_PHYS            0x13000000
-#define IMX_CS2_SIZE            0x01000000
-#define IMX_CS2_VIRT            0xeb000000
-
-#define IMX_CS3_PHYS            0x14000000
-#define IMX_CS3_SIZE            0x01000000
-#define IMX_CS3_VIRT            0xec000000
-
-#define IMX_CS4_PHYS            0x15000000
-#define IMX_CS4_SIZE            0x01000000
-#define IMX_CS4_VIRT            0xed000000
-
-#define IMX_CS5_PHYS            0x16000000
-#define IMX_CS5_SIZE            0x01000000
-#define IMX_CS5_VIRT            0xee000000
-
-#define IMX_FB_VIRT             0xF1000000
-#define IMX_FB_SIZE             (256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE                0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df7f0de..000000000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS  11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-        const char *name;
-        void (*irq_handler) (int, void *);
-        void (*err_handler) (int, void *, int errcode);
-        void *data;
-        unsigned int  dma_mode;
-        struct scatterlist *sg;
-        unsigned int sgbc;
-        unsigned int sgcount;
-        unsigned int resbytes;
-        int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST     1
-#define IMX_DMA_ERR_REQUEST   2
-#define IMX_DMA_ERR_TRANSFER  4
-#define IMX_DMA_ERR_BUFFER    8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ           0
-#define DMA_MODE_WRITE          1
-#define DMA_MODE_MASK           1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-                unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-                 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-                 unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-                void (*irq_handler) (int, void *),
-                void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif  /* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297fc0e38..000000000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- *  Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART       (1<<22)
-#define CSCR_MPLL_RESTART       (1<<21)
-#define CSCR_SYSTEM_SEL         (1<<16)
-#define CSCR_BCLK_DIV           (0xf<<10)
-#define CSCR_MPU_PRESC          (1<<15)
-#define CSCR_SPEN               (1<<1)
-#define CSCR_MPEN               (1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX  3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT   (1<<7)
-#define GPIO_IN    (0<<7)
-#define GPIO_PUEN  (1<<8)
-
-#define GPIO_PF    (0<<9)
-#define GPIO_AF    (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN   (0<<10)
-#define GPIO_BIN   (1<<10)
-#define GPIO_CIN   (2<<10)
-#define GPIO_DR    (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT     (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0   (2<<12)
-#define GPIO_AOUT_1   (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT      (0<<14)
-#define GPIO_BOUT_ISR  (1<<14)
-#define GPIO_BOUT_0    (2<<14)
-#define GPIO_BOUT_1    (3<<14)
-
-#define GPIO_GIUS      (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
-#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
-#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC    __REG(IMX_PWM_BASE + 0x00)      /* PWM Control Register         */
-#define PWMS    __REG(IMX_PWM_BASE + 0x04)      /* PWM Sample Register          */
-#define PWMP    __REG(IMX_PWM_BASE + 0x08)      /* PWM Period Register          */
-#define PWMCNT  __REG(IMX_PWM_BASE + 0x0C)      /* PWM Counter Register         */
-
-#define PWMC_HCTR               (0x01<<18)              /* Halfword FIFO Data Swapping  */
-#define PWMC_BCTR               (0x01<<17)              /* Byte FIFO Data Swapping      */
-#define PWMC_SWR                (0x01<<16)              /* Software Reset               */
-#define PWMC_CLKSRC             (0x01<<15)              /* Clock Source                 */
-#define PWMC_PRESCALER(x)       (((x-1) & 0x7F) << 8)   /* PRESCALER                    */
-#define PWMC_IRQ                (0x01<< 7)              /* Interrupt Request            */
-#define PWMC_IRQEN              (0x01<< 6)              /* Interrupt Request Enable     */
-#define PWMC_FIFOAV             (0x01<< 5)              /* FIFO Available               */
-#define PWMC_EN                 (0x01<< 4)              /* Enables/Disables the PWM     */
-#define PWMC_REPEAT(x)          (((x) & 0x03) << 2)     /* Sample Repeats               */
-#define PWMC_CLKSEL(x)          (((x) & 0x03) << 0)     /* Clock Selection              */
-
-#define PWMS_SAMPLE(x)          ((x) & 0xFFFF)          /* Contains a two-sample word   */
-#define PWMP_PERIOD(x)          ((x) & 0xFFFF)          /* Represents the PWM's period  */
-#define PWMC_COUNTER(x)         ((x) & 0xFFFF)          /* Represents the current count value   */
-
-/*
- *  DMA Controller
- */
-#define DCR     __REG(IMX_DMAC_BASE +0x00)      /* DMA Control Register */
-#define DISR    __REG(IMX_DMAC_BASE +0x04)      /* DMA Interrupt status Register */
-#define DIMR    __REG(IMX_DMAC_BASE +0x08)      /* DMA Interrupt mask Register */
-#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)      /* DMA Burst timeout status Register */
-#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)      /* DMA Request timeout Register */
-#define DSESR   __REG(IMX_DMAC_BASE +0x14)      /* DMA Transfer Error Status Register */
-#define DBOSR   __REG(IMX_DMAC_BASE +0x18)      /* DMA Buffer overflow status Register */
-#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)      /* DMA Burst timeout control Register */
-#define WSRA    __REG(IMX_DMAC_BASE +0x40)      /* W-Size Register A */
-#define XSRA    __REG(IMX_DMAC_BASE +0x44)      /* X-Size Register A */
-#define YSRA    __REG(IMX_DMAC_BASE +0x48)      /* Y-Size Register A */
-#define WSRB    __REG(IMX_DMAC_BASE +0x4c)      /* W-Size Register B */
-#define XSRB    __REG(IMX_DMAC_BASE +0x50)      /* X-Size Register B */
-#define YSRB    __REG(IMX_DMAC_BASE +0x54)      /* Y-Size Register B */
-#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
-#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
-#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
-#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff )
-#define CNTR_CNT(x)        ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
-#define CCR_DMOD_2D        ( 0x1 << 12 )
-#define CCR_DMOD_FIFO      ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
-#define CCR_SMOD_2D        ( 0x1 << 10 )
-#define CCR_SMOD_FIFO      ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        ( 0x0 << 6 )
-#define CCR_DSIZ_8         ( 0x1 << 6 )
-#define CCR_DSIZ_16        ( 0x2 << 6 )
-#define CCR_SSIZ_32        ( 0x0 << 4 )
-#define CCR_SSIZ_8         ( 0x1 << 4 )
-#define CCR_SSIZ_16        ( 0x2 << 4 )
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- *  Interrupt controller
- */
-
-#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD       (1<<19)
-#define INTCNTL_NIAD       (1<<20)
-
-#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
-
-/*
- *  General purpose timers
- */
-#define IMX_TCTL(x)        __REG( 0x00 + (x))
-#define TCTL_SWR           (1<<15)
-#define TCTL_FRR           (1<<8)
-#define TCTL_CAP_RIS       (1<<6)
-#define TCTL_CAP_FAL       (2<<6)
-#define TCTL_CAP_RIS_FAL   (3<<6)
-#define TCTL_OM            (1<<5)
-#define TCTL_IRQEN         (1<<4)
-#define TCTL_CLK_PCLK1     (1<<1)
-#define TCTL_CLK_PCLK1_16  (2<<1)
-#define TCTL_CLK_TIN       (3<<1)
-#define TCTL_CLK_32        (4<<1)
-#define TCTL_TEN           (1<<0)
-
-#define IMX_TPRER(x)       __REG( 0x04 + (x))
-#define IMX_TCMP(x)        __REG( 0x08 + (x))
-#define IMX_TCR(x)         __REG( 0x0C + (x))
-#define IMX_TCN(x)         __REG( 0x10 + (x))
-#define IMX_TSTAT(x)       __REG( 0x14 + (x))
-#define TSTAT_CAPT         (1<<1)
-#define TSTAT_COMP         (1<<0)
-
-#endif                          // _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d48026..000000000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-        int (*init)(struct platform_device *pdev);
-        void (*exit)(struct platform_device *pdev);
-        unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
deleted file mode 100644
index 9e197ae4590f..000000000000
--- a/arch/arm/mach-imx/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)         __typesafe_io(a)
-#define __mem_pci(a)    (a)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5ac1f9..000000000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START       0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
deleted file mode 100644
index a93df7cba694..000000000000
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET     UL(0x08000000)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f354dcca..000000000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
-        int (*card_present)(struct device *);
-        int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d510eb3..000000000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS               0x10000000
-#define MX1ADS_FLASH_SIZE               (16*1024*1024)
-
-#define IMX_FB_PHYS                     (0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430feecf..000000000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *      Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *      linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *      SPI slaves, and are numbered from zero to num_chipselects - 1.
- *      each slave has a chipselect signal, but it's common that not
- *      every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-        u8 num_chipselect;
-        u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *      sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *      dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *      I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-        u8      enable_loopback:1;
-        u8      enable_dma:1;
-        u8      ins_ss_pulse:1;
-        u16     bclk_wait:15;
-        void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT                   (1 << 0)
-#define SPI_CS_DEASSERT                 (1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
deleted file mode 100644
index 46d4ca91af79..000000000000
--- a/arch/arm/mach-imx/include/mach/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode, const char *cmd)
-{
-        cpu_reset(0);
-}
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67a8f6..000000000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-        unsigned long serial_port;
-
-        do {
-                serial_port = UART1_BASE;
-                if ( UART(UCR1) & UCR1_UARTEN )
-                        break;
-                serial_port = UART2_BASE;
-                if ( UART(UCR1) & UCR1_UARTEN )
-                        break;
-                return;
-        } while(0);
-
-        while (!(UART(USR2) & USR2_TXFE))
-                barrier();
-
-        UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
deleted file mode 100644
index 7d7cb0bde3e8..000000000000
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95deadc0..000000000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/irq.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  03/03/2004   Sascha Hauer <sascha@saschahauer.de>
- *               Copied from the motorola bsp package and added gpio demux
- *               interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF               0x00
-#define NIMASK_OFF                0x04
-#define INTENNUM_OFF              0x08
-#define INTDISNUM_OFF             0x0C
-#define INTENABLEH_OFF            0x10
-#define INTENABLEL_OFF            0x14
-#define INTTYPEH_OFF              0x18
-#define INTTYPEL_OFF              0x1C
-#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
-#define NIVECSR_OFF               0x40
-#define FIVECSR_OFF               0x44
-#define INTSRCH_OFF               0x48
-#define INTSRCL_OFF               0x4C
-#define INTFRCH_OFF               0x50
-#define INTFRCL_OFF               0x54
-#define NIPNDH_OFF                0x58
-#define NIPNDL_OFF                0x5C
-#define FIPNDH_OFF                0x60
-#define FIPNDL_OFF                0x64
-
-#define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...)       printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...)       do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
-        __raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
-        __raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-        unsigned int irqt;
-
-        if (irq >= IMX_IRQS)
-                return -EINVAL;
-
-        if (irq < IMX_IRQS / 2) {
-                irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
-                __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
-        } else {
-                irq -= IMX_IRQS / 2;
-                irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
-                __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
-        }
-
-        return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
-        unsigned int irq_type = 0, irq, reg, bit;
-
-        irq = _irq - IRQ_GPIOA(0);
-        reg = irq >> 5;
-        bit = 1 << (irq % 32);
-
-        if (type == IRQ_TYPE_PROBE) {
-                /* Don't mess with enabled GPIOs using preconfigured edges or
-                   GPIOs set to alternate function during probe */
-                /* TODO: support probe */
-//              if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-//                  GPIO_bit(gpio))
-//                      return 0;
-//              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-//                      return 0;
-//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-        }
-
-        GIUS(reg) |= bit;
-        DDIR(reg) &= ~(bit);
-
-        DEBUG_IRQ("setting type of irq %d to ", _irq);
-
-        if (type & IRQ_TYPE_EDGE_RISING) {
-                DEBUG_IRQ("rising edges\n");
-                irq_type = 0x0;
-        }
-        if (type & IRQ_TYPE_EDGE_FALLING) {
-                DEBUG_IRQ("falling edges\n");
-                irq_type = 0x1;
-        }
-        if (type & IRQ_TYPE_LEVEL_LOW) {
-                DEBUG_IRQ("low level\n");
-                irq_type = 0x3;
-        }
-        if (type & IRQ_TYPE_LEVEL_HIGH) {
-                DEBUG_IRQ("high level\n");
-                irq_type = 0x2;
-        }
-
-        if (irq % 32 < 16) {
-                ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
-                    (irq_type << ((irq % 16) * 2));
-        } else {
-                ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
-                    (irq_type << ((irq % 16) * 2));
-        }
-
-        return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
-        DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-        ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
-        DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-        IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
-        DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-        IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-        while (mask) {
-                if (mask & 1) {
-                        DEBUG_IRQ("handling irq %d\n", irq);
-                        generic_handle_irq(irq);
-                }
-                irq++;
-                mask >>= 1;
-        }
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-        unsigned int mask, irq;
-
-        mask = ISR(0);
-        irq = IRQ_GPIOA(0);
-        imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-        unsigned int mask, irq;
-
-        mask = ISR(1);
-        irq = IRQ_GPIOB(0);
-        imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-        unsigned int mask, irq;
-
-        mask = ISR(2);
-        irq = IRQ_GPIOC(0);
-        imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-        unsigned int mask, irq;
-
-        mask = ISR(3);
-        irq = IRQ_GPIOD(0);
-        imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
-        .name = "MPU",
-        .ack = imx_mask_irq,
-        .mask = imx_mask_irq,
-        .unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
-        .name = "GPIO",
-        .ack = imx_gpio_ack_irq,
-        .mask = imx_gpio_mask_irq,
-        .unmask = imx_gpio_unmask_irq,
-        .set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
-        unsigned int irq;
-
-        DEBUG_IRQ("Initializing imx interrupts\n");
-
-        /* Disable all interrupts initially. */
-        /* Do not rely on the bootloader. */
-        __raw_writel(0, IMX_AITC_INTENABLEH);
-        __raw_writel(0, IMX_AITC_INTENABLEL);
-
-        /* Mask all GPIO interrupts as well */
-        IMR(0) = 0;
-        IMR(1) = 0;
-        IMR(2) = 0;
-        IMR(3) = 0;
-
-        for (irq = 0; irq < IMX_IRQS; irq++) {
-                set_irq_chip(irq, &imx_internal_chip);
-                set_irq_handler(irq, handle_level_irq);
-                set_irq_flags(irq, IRQF_VALID);
-        }
-
-        for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
-                set_irq_chip(irq, &imx_gpio_chip);
-                set_irq_handler(irq, handle_edge_irq);
-                set_irq_flags(irq, IRQF_VALID);
-        }
-
-        set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
-        set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
-        set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
-        set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
-        /* Release masking of interrupts according to priority */
-        __raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
-        /* Initialize FIQ */
-        init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f2762cbc..000000000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
-        unsigned long flags;
-
-        local_irq_save(flags);
-
-        switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
-        case led_idle_start:
-                DR(0) &= ~(1<<2);
-                break;
-
-        case led_idle_end:
-                DR(0) |= 1<<2;
-                break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
-        case led_timer:
-                DR(0) ^= 1<<2;
-#endif
-        default:
-                break;
-        }
-        local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803e019b..000000000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
-        if (machine_is_mx1ads()) {
-                leds_event = mx1ads_leds_event;
-        }
-
-        return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1da338..000000000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff43b0b..000000000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- *      linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *      Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
-        [0] = {
-                .start  = IMX_CS4_PHYS + 0x300,
-                .end    = IMX_CS4_PHYS + 0x300 + 16,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = IRQ_GPIOC(17),
-                .end    = IRQ_GPIOC(17),
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device cs89x0_device = {
-        .name           = "cirrus-cs89x0",
-        .num_resources  = ARRAY_SIZE(cs89x0_resources),
-        .resource       = cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-        .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
-        [0] = {
-                .start  = 0x00206000,
-                .end    = 0x002060FF,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = (UART1_MINT_RX),
-                .end    = (UART1_MINT_RX),
-                .flags  = IORESOURCE_IRQ,
-        },
-        [2] = {
-                .start  = (UART1_MINT_TX),
-                .end    = (UART1_MINT_TX),
-                .flags  = IORESOURCE_IRQ,
-        },
-        [3] = {
-                .start  = UART1_MINT_RTS,
-                .end    = UART1_MINT_RTS,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device imx_uart1_device = {
-        .name           = "imx-uart",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(imx_uart1_resources),
-        .resource       = imx_uart1_resources,
-        .dev = {
-                .platform_data = &uart_pdata,
-        }
-};
-
-static struct resource imx_uart2_resources[] = {
-        [0] = {
-                .start  = 0x00207000,
-                .end    = 0x002070FF,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = (UART2_MINT_RX),
-                .end    = (UART2_MINT_RX),
-                .flags  = IORESOURCE_IRQ,
-        },
-        [2] = {
-                .start  = (UART2_MINT_TX),
-                .end    = (UART2_MINT_TX),
-                .flags  = IORESOURCE_IRQ,
-        },
-        [3] = {
-                .start  = UART2_MINT_RTS,
-                .end    = UART2_MINT_RTS,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device imx_uart2_device = {
-        .name           = "imx-uart",
-        .id             = 1,
-        .num_resources  = ARRAY_SIZE(imx_uart2_resources),
-        .resource       = imx_uart2_resources,
-        .dev = {
-                .platform_data = &uart_pdata,
-        }
-};
-
-static struct platform_device *devices[] __initdata = {
-        &cs89x0_device,
-        &imx_uart1_device,
-        &imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
-        /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
-        return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
-       .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
-        imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-        /* SD/MMC card detect */
-        imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
-        imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
-        imx_gpio_mode(PC9_PF_UART1_CTS);
-        imx_gpio_mode(PC10_PF_UART1_RTS);
-        imx_gpio_mode(PC11_PF_UART1_TXD);
-        imx_gpio_mode(PC12_PF_UART1_RXD);
-
-        imx_gpio_mode(PB28_PF_UART2_CTS);
-        imx_gpio_mode(PB29_PF_UART2_RTS);
-        imx_gpio_mode(PB30_PF_UART2_TXD);
-        imx_gpio_mode(PB31_PF_UART2_RXD);
-
-        platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
-        imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
-        /* Maintainer: Sascha Hauer, Pengutronix */
-        .phys_io        = 0x00200000,
-        .io_pg_offst    = ((0xe0000000) >> 18) & 0xfffc,
-        .boot_params    = 0x08000100,
-        .map_io         = mx1ads_map_io,
-        .init_irq       = imx_init_irq,
-        .timer          = &imx_timer,
-        .init_machine   = mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b599e5..000000000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
-        struct clock_event_device *evt = &clockevent_imx;
-        uint32_t tstat;
-        irqreturn_t ret = IRQ_NONE;
-
-        /* clear the interrupt */
-        tstat = IMX_TSTAT(TIMER_BASE);
-        IMX_TSTAT(TIMER_BASE) = 0;
-
-        if (tstat & TSTAT_COMP) {
-                evt->event_handler(evt);
-                ret = IRQ_HANDLED;
-        }
-
-        return ret;
-}
-
-static struct irqaction imx_timer_irq = {
-        .name           = "i.MX Timer Tick",
-        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-        .handler        = imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
-        /*
-         * Initialise to a known state (all timers off, and timing reset)
-         */
-        IMX_TCTL(TIMER_BASE) = 0;
-        IMX_TPRER(TIMER_BASE) = 0;
-
-        IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
-        return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
-        .name           = "imx_timer1",
-        .rating         = 200,
-        .read           = imx_get_cycles,
-        .mask           = 0xFFFFFFFF,
-        .shift          = 20,
-        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
-        clocksource_imx.mult =
-                clocksource_hz2mult(rate, clocksource_imx.shift);
-        clocksource_register(&clocksource_imx);
-
-        return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
-                                  struct clock_event_device *unused)
-{
-        unsigned long tcmp;
-
-        tcmp = IMX_TCN(TIMER_BASE) + evt;
-        IMX_TCMP(TIMER_BASE) = tcmp;
-
-        return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
-        [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-        [CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-        [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-        [CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-        unsigned long flags;
-
-        /*
-         * The timer interrupt generation is disabled at least
-         * for enough time to call imx_set_next_event()
-         */
-        local_irq_save(flags);
-        /* Disable interrupt in GPT module */
-        IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
-        if (mode != clockevent_mode) {
-                /* Set event time into far-far future */
-                IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
-                /* Clear pending interrupt */
-                IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
-        }
-
-#ifdef DEBUG
-        printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
-                clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
-        /* Remember timer mode */
-        clockevent_mode = mode;
-        local_irq_restore(flags);
-
-        switch (mode) {
-        case CLOCK_EVT_MODE_PERIODIC:
-                printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
-                break;
-        case CLOCK_EVT_MODE_ONESHOT:
-                /*
-                 * Do not put overhead of interrupt enable/disable into
-                 * imx_set_next_event(), the core has about 4 minutes
-                 * to call imx_set_next_event() or shutdown clock after
-                 * mode switching
-                 */
-                local_irq_save(flags);
-                IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
-                local_irq_restore(flags);
-                break;
-        case CLOCK_EVT_MODE_SHUTDOWN:
-        case CLOCK_EVT_MODE_UNUSED:
-        case CLOCK_EVT_MODE_RESUME:
-                /* Left event sources disabled, no more interrupts appears */
-                break;
-        }
-}
-
-static struct clock_event_device clockevent_imx = {
-        .name           = "imx_timer1",
-        .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
-        .set_mode       = imx_set_mode,
-        .set_next_event = imx_set_next_event,
-        .rating         = 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
-        clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
-                                        clockevent_imx.shift);
-        clockevent_imx.max_delta_ns =
-                clockevent_delta2ns(0xfffffffe, &clockevent_imx);
-        clockevent_imx.min_delta_ns =
-                clockevent_delta2ns(0xf, &clockevent_imx);
-
-        clockevent_imx.cpumask = cpumask_of(0);
-
-        clockevents_register_device(&clockevent_imx);
-
-        return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
-        struct clk *clk;
-        unsigned long rate;
-
-        imx_clocks_init();
-
-        clk = clk_get(NULL, "perclk1");
-        clk_enable(clk);
-        rate = clk_get_rate(clk);
-
-        imx_timer_hardware_init();
-        imx_clocksource_init(rate);
-
-        imx_clockevent_init(rate);
-
-        /*
-         * Make irqs happen for the system timer
-         */
-        setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
-        .init           = imx_timer_init,
-};
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2c5a02b8520e..264f4d59f898 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -78,6 +78,12 @@ config MACH_IXDP465
           IXDP465 Development Platform (Also known as BMP).
           For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_GORAMO_MLR
+        bool "GORAMO Multi Link Router"
+        help
+          Say 'Y' here if you want your kernel to support GORAMO
+          MultiLink router.
+
 config MACH_KIXRP435
         bool "KIXRP435"
         help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 2e6bbf927a74..47d1f60d23fa 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)  += gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)      += wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)          += fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR)   += goramo_mlr.o
 
 obj-$(CONFIG_PCI)               += $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)       += ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
new file mode 100644
index 000000000000..a733b8ff3cec
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -0,0 +1,507 @@
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n)            (IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n)             xgpio_irq(n)
+
+#define SLOT_ETHA               0x0B    /* IDSEL = AD21 */
+#define SLOT_ETHB               0x0C    /* IDSEL = AD20 */
+#define SLOT_MPCI               0x0D    /* IDSEL = AD19 */
+#define SLOT_NEC                0x0E    /* IDSEL = AD18 */
+
+#define IRQ_ETHA                IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB                IRQ_IXP4XX_GPIO5
+#define IRQ_NEC                 IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI                IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL                0
+#define GPIO_SDA                1
+#define GPIO_STR                2
+#define GPIO_HSS0_DCD_N         6
+#define GPIO_HSS1_DCD_N         7
+#define GPIO_HSS0_CTS_N         10
+#define GPIO_HSS1_CTS_N         11
+#define GPIO_HSS1_RTS_N         13
+#define GPIO_HSS0_RTS_N         14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT    0
+#define CONTROL_HSS1_CLK_INT    1
+#define CONTROL_HSS0_DTR_N      2
+#define CONTROL_HSS1_DTR_N      3
+#define CONTROL_EXT             4
+#define CONTROL_AUTO_RESET      5
+#define CONTROL_PCI_RESET_N     6
+#define CONTROL_EEPROM_WC_N     7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS        0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS        0x46 /* 6 bytes */
+#define CFG_REV                 0x4C /* u32 */
+#define CFG_SDRAM_SIZE          0x50 /* u32 */
+#define CFG_SDRAM_CONF          0x54 /* u32 */
+#define CFG_SDRAM_MODE          0x58 /* u32 */
+#define CFG_SDRAM_REFRESH       0x5C /* u32 */
+
+#define CFG_HW_BITS             0x60 /* u32 */
+#define  CFG_HW_USB_PORTS       0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define  CFG_HW_HAS_PCI_SLOT    0x00000008
+#define  CFG_HW_HAS_ETH0        0x00000010
+#define  CFG_HW_HAS_ETH1        0x00000020
+#define  CFG_HW_HAS_HSS0        0x00000040
+#define  CFG_HW_HAS_HSS1        0x00000080
+#define  CFG_HW_HAS_UART0       0x00000100
+#define  CFG_HW_HAS_UART1       0x00000200
+#define  CFG_HW_HAS_EEPROM      0x00000400
+
+#define FLASH_CMD_READ_ARRAY    0xFF
+#define FLASH_CMD_READ_ID       0x90
+#define FLASH_SER_OFF           0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+        gpio_line_set(GPIO_SCL, !!value);
+        udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+        gpio_line_set(GPIO_SDA, !!value);
+        udelay(3);
+}
+
+static void set_str(u8 value)
+{
+        gpio_line_set(GPIO_STR, !!value);
+        udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+        if (value)
+                control_value |=  (1 << line);
+        else
+                control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+        int i;
+
+        gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+        gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+        for (i = 0; i < 8; i++) {
+                set_scl(0);
+                set_sda(control_value & (0x80 >> i)); /* MSB first */
+                set_scl(1);     /* active edge */
+        }
+
+        set_str(1);
+        set_str(0);
+
+        set_scl(0);
+        set_sda(1);             /* Be ready for START */
+        set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+        int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+        switch (clock_type) {
+        case CLOCK_DEFAULT:
+        case CLOCK_EXT:
+                set_control(ctrl_int, 0);
+                output_control();
+                return CLOCK_EXT;
+
+        case CLOCK_INT:
+                set_control(ctrl_int, 1);
+                output_control();
+                return CLOCK_INT;
+
+        default:
+                return -EINVAL;
+        }
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+        int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+        gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+        set_carrier_cb_tab[port](pdev, !i);
+        return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+                    void (*set_carrier_cb)(void *pdev, int carrier))
+{
+        int i, irq;
+
+        if (!port)
+                irq = gpio_irq(GPIO_HSS0_DCD_N);
+        else
+                irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+        gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+        set_carrier_cb(pdev, !i);
+
+        set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+        if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+                printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+                       irq, i);
+                return i;
+        }
+
+        set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+        output_control();
+        gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+        return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+        free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+                 pdev);
+        set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+        set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+        output_control();
+        gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+        .map_name       = "cfi_probe",
+        .width          = 2,
+};
+
+static struct resource flash_resource = {
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+        .name           = "IXP4XX-Flash",
+        .id             = 0,
+        .dev            = { .platform_data = &flash_data },
+        .num_resources  = 1,
+        .resource       = &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+        .sda_pin        = GPIO_SDA,
+        .scl_pin        = GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+        .name           = "i2c-gpio",
+        .id             = 0,
+        .dev            = { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+        {
+                .start          = IXP4XX_UART1_BASE_PHYS,
+                .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+                .flags          = IORESOURCE_MEM,
+        },
+        {
+                .start          = IXP4XX_UART2_BASE_PHYS,
+                .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+                .flags          = IORESOURCE_MEM,
+        }
+};
+
+static struct plat_serial8250_port uart_data[] = {
+        {
+                .mapbase        = IXP4XX_UART1_BASE_PHYS,
+                .membase        = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+                        REG_OFFSET,
+                .irq            = IRQ_IXP4XX_UART1,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = IXP4XX_UART_XTAL,
+        },
+        {
+                .mapbase        = IXP4XX_UART2_BASE_PHYS,
+                .membase        = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+                        REG_OFFSET,
+                .irq            = IRQ_IXP4XX_UART2,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = IXP4XX_UART_XTAL,
+        },
+        { },
+};
+
+static struct platform_device device_uarts = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM,
+        .dev.platform_data      = uart_data,
+        .num_resources          = 2,
+        .resource               = uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+        {
+                .phy            = 0,
+                .rxq            = 3,
+                .txreadyq       = 32,
+        }, {
+                .phy            = 1,
+                .rxq            = 4,
+                .txreadyq       = 33,
+        }
+};
+
+static struct platform_device device_eth_tab[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEB,
+                .dev.platform_data      = eth_plat,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = eth_plat + 1,
+        }
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+        {
+                .set_clock      = hss_set_clock,
+                .open           = hss_open,
+                .close          = hss_close,
+                .txreadyq       = 34,
+        }, {
+                .set_clock      = hss_set_clock,
+                .open           = hss_open,
+                .close          = hss_close,
+                .txreadyq       = 35,
+        }
+};
+
+static struct platform_device device_hss_tab[] = {
+        {
+                .name                   = "ixp4xx_hss",
+                .id                     = 0,
+                .dev.platform_data      = hss_plat,
+        }, {
+                .name                   = "ixp4xx_hss",
+                .id                     = 1,
+                .dev.platform_data      = hss_plat + 1,
+        }
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+        &device_flash,          /* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+        return __raw_readb(flash + addr);
+#else
+        return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+        return __raw_readw(flash + addr);
+#else
+        return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+        u8 __iomem *flash;
+        int i, devices = 1; /* flash */
+
+        ixp4xx_sys_init();
+
+        if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+                printk(KERN_ERR "goramo-mlr: unable to access system"
+                       " configuration data\n");
+        else {
+                system_rev = __raw_readl(flash + CFG_REV);
+                hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+                for (i = 0; i < ETH_ALEN; i++) {
+                        eth_plat[0].hwaddr[i] =
+                                flash_readb(flash, CFG_ETH0_ADDRESS + i);
+                        eth_plat[1].hwaddr[i] =
+                                flash_readb(flash, CFG_ETH1_ADDRESS + i);
+                }
+
+                __raw_writew(FLASH_CMD_READ_ID, flash);
+                system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+                system_serial_high <<= 16;
+                system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+                system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+                system_serial_low <<= 16;
+                system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+                __raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+                iounmap(flash);
+        }
+
+        switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+        case CFG_HW_HAS_UART0:
+                memset(&uart_data[1], 0, sizeof(uart_data[1]));
+                device_uarts.num_resources = 1;
+                break;
+
+        case CFG_HW_HAS_UART1:
+                device_uarts.dev.platform_data = &uart_data[1];
+                device_uarts.resource = &uart_resources[1];
+                device_uarts.num_resources = 1;
+                break;
+        }
+        if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+                device_tab[devices++] = &device_uarts; /* max index 1 */
+
+        if (hw_bits & CFG_HW_HAS_ETH0)
+                device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+        if (hw_bits & CFG_HW_HAS_ETH1)
+                device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+        if (hw_bits & CFG_HW_HAS_HSS0)
+                device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+        if (hw_bits & CFG_HW_HAS_HSS1)
+                device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+        if (hw_bits & CFG_HW_HAS_EEPROM)
+                device_tab[devices++] = &device_i2c; /* max index 6 */
+
+        gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+        gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+        gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+        gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+        gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+        gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+        gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+        set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+        set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+        set_control(CONTROL_HSS0_DTR_N, 1);
+        set_control(CONTROL_HSS1_DTR_N, 1);
+        set_control(CONTROL_EEPROM_WC_N, 1);
+        set_control(CONTROL_PCI_RESET_N, 1);
+        output_control();
+
+        msleep(1);            /* Wait for PCI devices to initialize */
+
+        flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+        flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+        platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+        set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+        set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+        ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+        if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+            (hw_bits & CFG_HW_USB_PORTS) < 5) {
+                /* need to adjust number of USB ports on NEC chip */
+                u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+                if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+                        value &= ~7;
+                        value |= (hw_bits & CFG_HW_USB_PORTS);
+                        ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+                }
+        }
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        switch(slot) {
+        case SLOT_ETHA: return IRQ_ETHA;
+        case SLOT_ETHB: return IRQ_ETHB;
+        case SLOT_NEC:  return IRQ_NEC;
+        default:        return IRQ_MPCI;
+        }
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+        .nr_controllers = 1,
+        .preinit        = gmlr_pci_preinit,
+        .postinit       = gmlr_pci_postinit,
+        .swizzle        = pci_std_swizzle,
+        .setup          = ixp4xx_setup,
+        .scan           = ixp4xx_scan_bus,
+        .map_irq        = gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+        if (machine_is_goramo_mlr() &&
+            (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+                pci_common_init(&gmlr_hw_pci);
+        return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+        /* Maintainer: Krzysztof Halasa */
+        .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
+        .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+        .map_io         = ixp4xx_map_io,
+        .init_irq       = ixp4xx_init_irq,
+        .timer          = &ixp4xx_timer,
+        .boot_params    = 0x0100,
+        .init_machine   = gmlr_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index def7773be67c..b2ef65db0e91 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -26,6 +26,8 @@
 #define IXP46X_PROCESSOR_ID_VALUE       0x69054200 /* including IXP455 */
 #define IXP46X_PROCESSOR_ID_MASK        0xfffffff0
 
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+                                IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
                          IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
@@ -35,8 +37,11 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-        unsigned int val = ~*IXP4XX_EXP_CFG2;
+        u32 val = ~*IXP4XX_EXP_CFG2;
 
+        if (cpu_is_ixp42x_rev_a0())
+                return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+                                               IXP4XX_FEATURE_AES);
         if (cpu_is_ixp42x())
                 return val & IXP42X_FEATURE_MASK;
         if (cpu_is_ixp43x())
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 0cbe6ceb67c5..9e7cad2d54cb 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -15,7 +15,7 @@
 #define DEBUG_QMGR      0
 
 #define HALF_QUEUES     32
-#define QUEUES          64      /* only 32 lower queues currently supported */
+#define QUEUES          64
 #define MAX_QUEUE_LENGTH 4      /* in dwords */
 
 #define QUEUE_STAT1_EMPTY               1 /* queue status bits */
@@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue)
         return val;
 }
 
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
 {
         extern struct qmgr_regs __iomem *qmgr_regs;
         return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
                 >> ((queue & 7) << 2)) & 0xF;
 }
 
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
 {
         extern struct qmgr_regs __iomem *qmgr_regs;
+        BUG_ON(queue >= HALF_QUEUES);
         return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
                 >> ((queue & 0xF) << 1)) & 0x3;
 }
 
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue:      queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
 static inline int qmgr_stat_empty(unsigned int queue)
 {
-        return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+        BUG_ON(queue >= HALF_QUEUES);
+        return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue:      queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-        return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+        extern struct qmgr_regs __iomem *qmgr_regs;
+        if (queue >= HALF_QUEUES)
+                return (__raw_readl(&qmgr_regs->statne_h) >>
+                        (queue - HALF_QUEUES)) & 0x01;
+        return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue:      queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
 {
-        return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+        BUG_ON(queue >= HALF_QUEUES);
+        return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
 }
 
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue:      queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-        return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+        extern struct qmgr_regs __iomem *qmgr_regs;
+        if (queue >= HALF_QUEUES)
+                return (__raw_readl(&qmgr_regs->statf_h) >>
+                        (queue - HALF_QUEUES)) & 0x01;
+        return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
 }
 
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue:      queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
 static inline int qmgr_stat_underflow(unsigned int queue)
 {
-        return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+        return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
 }
 
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue:      queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
 static inline int qmgr_stat_overflow(unsigned int queue)
 {
-        return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+        return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
 }
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 7bb8e778e4b6..47ac69c7ec78 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe)
         /* reset the NPE */
         ixp4xx_write_feature_bits(val &
                                   ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-        for (i = 0; i < MAX_RETRIES; i++) {
-                if (!(ixp4xx_read_feature_bits() &
-                      (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-                        break;  /* reset completed */
-                udelay(1);
-        }
-        if (i == MAX_RETRIES)
-                return -ETIMEDOUT;
-
         /* deassert reset */
         ixp4xx_write_feature_bits(val |
                                   (IXP4XX_FEATURE_RESET_NPEA << npe->id));
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfddc73d0a20..bfdbe4b5a3cc 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
 
 #if DEBUG_QMGR
 char qmgr_queue_descs[QUEUES][32];
@@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32];
 void qmgr_set_irq(unsigned int queue, int src,
                   void (*handler)(void *pdev), void *pdev)
 {
-        u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-        int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
         unsigned long flags;
 
-        src &= 7;
         spin_lock_irqsave(&qmgr_lock, flags);
-        __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+        if (queue < HALF_QUEUES) {
+                u32 __iomem *reg;
+                int bit;
+                BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+                reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+                bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+                __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+                             reg);
+        } else
+                /* IRQ source for queues 32-63 is fixed */
+                BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
         irq_handlers[queue] = handler;
         irq_pdevs[queue] = pdev;
         spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
 {
-        int i;
-        u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-        __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-
-        for (i = 0; i < HALF_QUEUES; i++)
-                if (val & (1 << i))
+        int i, ret = 0;
+        u32 en_bitmap, src, stat;
+
+        /* ACK - it may clear any bits so don't rely on it */
+        __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+        en_bitmap = qmgr_regs->irqen[0];
+        while (en_bitmap) {
+                i = __fls(en_bitmap); /* number of the last "low" queue */
+                en_bitmap &= ~BIT(i);
+                src = qmgr_regs->irqsrc[i >> 3];
+                stat = qmgr_regs->stat1[i >> 3];
+                if (src & 4) /* the IRQ condition is inverted */
+                        stat = ~stat;
+                if (stat & BIT(src & 3)) {
                         irq_handlers[i](irq_pdevs[i]);
+                        ret = IRQ_HANDLED;
+                }
+        }
+        return ret;
+}
+
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+        int i, ret = 0;
+        u32 req_bitmap;
+
+        /* ACK - it may clear any bits so don't rely on it */
+        __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+        req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+        while (req_bitmap) {
+                i = __fls(req_bitmap); /* number of the last "high" queue */
+                req_bitmap &= ~BIT(i);
+                irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+                ret = IRQ_HANDLED;
+        }
+        return ret;
+}
 
-        return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+        int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+        u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+        if (!req_bitmap)
+                return 0;
+        __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+        while (req_bitmap) {
+                i = __fls(req_bitmap); /* number of the last queue */
+                req_bitmap &= ~BIT(i);
+                i += half * HALF_QUEUES;
+                irq_handlers[i](irq_pdevs[i]);
+        }
+        return IRQ_HANDLED;
 }
 
 
 void qmgr_enable_irq(unsigned int queue)
 {
         unsigned long flags;
+        int half = queue / 32;
+        u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
         spin_lock_irqsave(&qmgr_lock, flags);
-        __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-                     &qmgr_regs->irqen[0]);
+        __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+                     &qmgr_regs->irqen[half]);
         spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 void qmgr_disable_irq(unsigned int queue)
 {
         unsigned long flags;
+        int half = queue / 32;
+        u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
         spin_lock_irqsave(&qmgr_lock, flags);
-        __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-                     &qmgr_regs->irqen[0]);
-        __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+        __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+                     &qmgr_regs->irqen[half]);
+        __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
         spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
@@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
         u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
         int err;
 
-        if (queue >= HALF_QUEUES)
-                return -ERANGE;
+        BUG_ON(queue >= QUEUES);
 
         if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
                 return -EINVAL;
@@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue)
 {
         u32 cfg, addr, mask[4];
 
-        BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+        BUG_ON(queue >= QUEUES); /* not in valid range */
 
         spin_lock_irq(&qmgr_lock);
         cfg = __raw_readl(&qmgr_regs->sram[queue]);
@@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue)
 static int qmgr_init(void)
 {
         int i, err;
+        irq_handler_t handler1, handler2;
+
         mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
                                      IXP4XX_QMGR_REGION_SIZE,
                                      "IXP4xx Queue Manager");
@@ -247,23 +309,42 @@ static int qmgr_init(void)
                 __raw_writel(0, &qmgr_regs->irqen[i]);
         }
 
+        __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+        __raw_writel(0, &qmgr_regs->statf_h);
+
         for (i = 0; i < QUEUES; i++)
                 __raw_writel(0, &qmgr_regs->sram[i]);
 
-        err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-                          "IXP4xx Queue Manager", NULL);
+        if (cpu_is_ixp42x_rev_a0()) {
+                handler1 = qmgr_irq1_a0;
+                handler2 = qmgr_irq2_a0;
+        } else
+                handler1 = handler2 = qmgr_irq;
+
+        err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+                          NULL);
         if (err) {
-                printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-                       IRQ_IXP4XX_QM1);
+                printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+                       IRQ_IXP4XX_QM1, err);
                 goto error_irq;
         }
 
+        err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+                          NULL);
+        if (err) {
+                printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+                       IRQ_IXP4XX_QM2, err);
+                goto error_irq2;
+        }
+
         used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
         spin_lock_init(&qmgr_lock);
 
         printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
         return 0;
 
+error_irq2:
+        free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
         iounmap(qmgr_regs);
 error_map:
@@ -274,7 +355,9 @@ error_map:
 static void qmgr_remove(void)
 {
         free_irq(IRQ_IXP4XX_QM1, NULL);
+        free_irq(IRQ_IXP4XX_QM2, NULL);
         synchronize_irq(IRQ_IXP4XX_QM1);
+        synchronize_irq(IRQ_IXP4XX_QM2);
         iounmap(qmgr_regs);
         release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 0dec6f300ffc..7622c9b38c97 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -26,6 +26,7 @@
 
 #include <asm/mach/map.h>
 
+#include <mach/common.h>
 #include <mach/hardware.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
@@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = {
         }
 };
 
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
 {
+        mxc_set_cpu_type(MXC_CPU_MX1);
+
         iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e54057fb855b..e5b0c0a83c3b 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -12,77 +12,56 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include <mach/irqs.h>
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
 #include <mach/i2c.h>
+#include <mach/imx-uart.h>
 #include <mach/iomux.h>
+#include <mach/irqs.h>
+
 #include "devices.h"
 
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+        /* UART1 */
         PC9_PF_UART1_CTS,
         PC10_PF_UART1_RTS,
         PC11_PF_UART1_TXD,
         PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins));
-        return 0;
-}
-
-static int mxc_uart2_pins[] = {
+        /* UART2 */
         PB28_PF_UART2_CTS,
         PB29_PF_UART2_RTS,
         PB30_PF_UART2_TXD,
         PB31_PF_UART2_RXD,
+        /* I2C */
+        PA15_PF_I2C_SDA,
+        PA16_PF_I2C_SCL,
+        /* SPI */
+        PC13_PF_SPI1_SPI_RDY,
+        PC14_PF_SPI1_SCLK,
+        PC15_PF_SPI1_SS,
+        PC16_PF_SPI1_MISO,
+        PC17_PF_SPI1_MOSI,
 };
 
-static int uart2_mxc_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-                        ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-                        ARRAY_SIZE(mxc_uart2_pins));
-        return 0;
-}
+/*
+ * UARTs platform data
+ */
 
 static struct imxuart_platform_data uart_pdata[] = {
         {
-                .init = uart1_mxc_init,
-                .exit = uart1_mxc_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart2_mxc_init,
-                .exit = uart2_mxc_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         },
 };
@@ -111,24 +90,6 @@ static struct platform_device flash_device = {
 /*
  * I2C
  */
-
-static int i2c_pins[] = {
-        PA15_PF_I2C_SDA,
-        PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
-        return mxc_gpio_setup_multiple_pins(i2c_pins,
-                        ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
-        mxc_gpio_release_multiple_pins(i2c_pins,
-                        ARRAY_SIZE(i2c_pins));
-}
-
 static struct pcf857x_platform_data pcf857x_data[] = {
         {
                 .gpio_base = 4 * 32,
@@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = {
 
 static struct imxi2c_platform_data mx1ads_i2c_data = {
         .bitrate = 100000,
-        .init = i2c_init,
-        .exit = i2c_exit,
 };
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
@@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+        mxc_gpio_setup_multiple_pins(mx1ads_pins,
+                ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
         /* UART */
         mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
         mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
@@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
         .phys_io        = IMX_IO_PHYS,
         .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx1_map_io,
         .init_irq       = mxc_init_irq,
         .timer          = &mx1ads_timer,
         .init_machine   = mx1ads_init,
@@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
         .phys_io        = IMX_IO_PHYS,
         .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx1_map_io,
         .init_irq       = mxc_init_irq,
         .timer          = &mx1ads_timer,
         .init_machine   = mx1ads_init,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 0e71f3fa28bf..20e0b5bcdffc 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
         .phys_io        = 0x00200000,
         .io_pg_offst    = ((0xe0200000) >> 18) & 0xfffc,
         .boot_params    = 0x08000100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx1_map_io,
         .init_irq       = mxc_init_irq,
         .timer          = &scb9328_timer,
         .init_machine   = scb9328_init,
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 42a788842f49..61550443a233 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -18,6 +18,13 @@ endchoice
 
 comment "MX2 platforms:"
 
+config MACH_MX21ADS
+        bool "MX21ADS platform"
+        depends on MACH_MX21
+        help
+          Include support for MX21ADS platform. This includes specific
+          configurations for the board and its peripherals.
+
 config MACH_MX27ADS
         bool "MX27ADS platform"
         depends on MACH_MX27
@@ -46,4 +53,10 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_MX27_3DS
+        bool "MX27PDK platform"
+        depends on MACH_MX27
+        help
+          Include support for MX27PDK platform. This includes specific
+          configurations for the board and its peripherals.
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 950649a91540..d140e2dcf942 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
 obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bd51dd04948e..169372f69d8f 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
 {
+        mxc_set_cpu_type(MXC_CPU_MX21);
+
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+
+void __init mx27_map_io(void)
+{
+        mxc_set_cpu_type(MXC_CPU_MX27);
+
+        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
new file mode 100644
index 000000000000..a5ee461cb405
--- /dev/null
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -0,0 +1,286 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+        /* CS8900A */
+        (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+        /* UART1 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+
+        /* UART3 (IrDA) - only TXD and RXD */
+        PE8_PF_UART3_TXD,
+        PE9_PF_UART3_RXD,
+
+        /* UART4 */
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD,
+
+        /* LCDC */
+        PA5_PF_LSCLK,
+        PA6_PF_LD0,
+        PA7_PF_LD1,
+        PA8_PF_LD2,
+        PA9_PF_LD3,
+        PA10_PF_LD4,
+        PA11_PF_LD5,
+        PA12_PF_LD6,
+        PA13_PF_LD7,
+        PA14_PF_LD8,
+        PA15_PF_LD9,
+        PA16_PF_LD10,
+        PA17_PF_LD11,
+        PA18_PF_LD12,
+        PA19_PF_LD13,
+        PA20_PF_LD14,
+        PA21_PF_LD15,
+        PA22_PF_LD16,
+        PA24_PF_REV,     /* Sharp panel dedicated signal */
+        PA25_PF_CLS,     /* Sharp panel dedicated signal */
+        PA26_PF_PS,      /* Sharp panel dedicated signal */
+        PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+        PA28_PF_HSYNC,
+        PA29_PF_VSYNC,
+        PA30_PF_CONTRAST,
+        PA31_PF_OE_ACD,
+
+        /* MMC/SDHC */
+        PE18_PF_SD1_D0,
+        PE19_PF_SD1_D1,
+        PE20_PF_SD1_D2,
+        PE21_PF_SD1_D3,
+        PE22_PF_SD1_CMD,
+        PE23_PF_SD1_CLK,
+
+        /* NFC */
+        PF0_PF_NRFB,
+        PF1_PF_NFCE,
+        PF2_PF_NFWP,
+        PF3_PF_NFCLE,
+        PF4_PF_NFALE,
+        PF5_PF_NFRE,
+        PF6_PF_NFWE,
+        PF7_PF_NFIO0,
+        PF8_PF_NFIO1,
+        PF9_PF_NFIO2,
+        PF10_PF_NFIO3,
+        PF11_PF_NFIO4,
+        PF12_PF_NFIO5,
+        PF13_PF_NFIO6,
+        PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+        .width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+        .start = CS0_BASE_ADDR,
+        .end = CS0_BASE_ADDR + 0x02000000 - 1,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+        .name = "physmap-flash",
+        .id = 0,
+        .dev = {
+                .platform_data = &mx21ads_flash_data,
+        },
+        .num_resources = 1,
+        .resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+        u16 tmp;
+
+        tmp = __raw_readw(MX21ADS_IO_REG);
+        tmp |= MX21ADS_IO_LCDON;
+        __raw_writew(tmp, MX21ADS_IO_REG);
+        return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+        u16 tmp;
+
+        tmp = __raw_readw(MX21ADS_IO_REG);
+        tmp &= ~MX21ADS_IO_LCDON;
+        __raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+        .pixclock       = 188679, /* in ps */
+        .xres           = 240,
+        .yres           = 320,
+
+        .bpp            = 16,
+        .hsync_len      = 2,
+        .left_margin    = 6,
+        .right_margin   = 16,
+
+        .vsync_len      = 1,
+        .upper_margin   = 8,
+        .lower_margin   = 10,
+        .fixed_screen_cpu = 0,
+
+        .pcr            = 0xFB108BC7,
+        .pwmr           = 0x00A901ff,
+        .lscr1          = 0x00120300,
+        .dmacr          = 0x00020008,
+
+        .init = mx21ads_fb_init,
+        .exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+        return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+        void *data)
+{
+        int ret;
+
+        ret = request_irq(IRQ_GPIOD(25), detect_irq,
+                IRQF_TRIGGER_FALLING, "mmc-detect", data);
+        if (ret)
+                goto out;
+        return 0;
+out:
+        return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+        free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+        .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+        .get_ro = mx21ads_sdhc_get_ro,
+        .init = mx21ads_sdhc_init,
+        .exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+        /*
+         * Memory-mapped I/O on MX21ADS Base board:
+         *   - CS8900A Ethernet controller
+         *   - ST16C2552CJ UART
+         *   - CPU and Base board version
+         *   - Base board I/O register
+         */
+        {
+                .virtual = MX21ADS_MMIO_BASE_ADDR,
+                .pfn = __phys_to_pfn(CS1_BASE_ADDR),
+                .length = MX21ADS_MMIO_SIZE,
+                .type = MT_DEVICE,
+        },
+};
+
+static void __init mx21ads_map_io(void)
+{
+        mx21_map_io();
+        iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+        &mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+        mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+                        "mx21ads");
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+        mxc_register_device(&mxc_uart_device3, &uart_pdata);
+        mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+        mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+        mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+        mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+        .init   = mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+        /* maintainer: Freescale Semiconductor, Inc. */
+        .phys_io        = AIPI_BASE_ADDR,
+        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mx21ads_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = mx21ads_board_init,
+        .timer          = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4a3b097adc12..02daddac6995 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,6 +23,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,9 +35,117 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux.h>
 #include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int mx27ads_pins[] = {
+        /* UART0 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* UART1 */
+        PE3_PF_UART2_CTS,
+        PE4_PF_UART2_RTS,
+        PE6_PF_UART2_TXD,
+        PE7_PF_UART2_RXD,
+        /* UART2 */
+        PE8_PF_UART3_TXD,
+        PE9_PF_UART3_RXD,
+        PE10_PF_UART3_CTS,
+        PE11_PF_UART3_RTS,
+        /* UART3 */
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD,
+        /* UART4 */
+        PB18_AF_UART5_TXD,
+        PB19_AF_UART5_RXD,
+        PB20_AF_UART5_CTS,
+        PB21_AF_UART5_RTS,
+        /* UART5 */
+        PB10_AF_UART6_TXD,
+        PB12_AF_UART6_CTS,
+        PB11_AF_UART6_RXD,
+        PB13_AF_UART6_RTS,
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+        /* I2C2 */
+        PC5_PF_I2C2_SDA,
+        PC6_PF_I2C2_SCL,
+        /* FB */
+        PA5_PF_LSCLK,
+        PA6_PF_LD0,
+        PA7_PF_LD1,
+        PA8_PF_LD2,
+        PA9_PF_LD3,
+        PA10_PF_LD4,
+        PA11_PF_LD5,
+        PA12_PF_LD6,
+        PA13_PF_LD7,
+        PA14_PF_LD8,
+        PA15_PF_LD9,
+        PA16_PF_LD10,
+        PA17_PF_LD11,
+        PA18_PF_LD12,
+        PA19_PF_LD13,
+        PA20_PF_LD14,
+        PA21_PF_LD15,
+        PA22_PF_LD16,
+        PA23_PF_LD17,
+        PA24_PF_REV,
+        PA25_PF_CLS,
+        PA26_PF_PS,
+        PA27_PF_SPL_SPR,
+        PA28_PF_HSYNC,
+        PA29_PF_VSYNC,
+        PA30_PF_CONTRAST,
+        PA31_PF_OE_ACD,
+        /* OWIRE */
+        PE16_AF_OWIRE,
+        /* SDHC1*/
+        PE18_PF_SD1_D0,
+        PE19_PF_SD1_D1,
+        PE20_PF_SD1_D2,
+        PE21_PF_SD1_D3,
+        PE22_PF_SD1_CMD,
+        PE23_PF_SD1_CLK,
+        /* SDHC2*/
+        PB4_PF_SD2_D0,
+        PB5_PF_SD2_D1,
+        PB6_PF_SD2_D2,
+        PB7_PF_SD2_D3,
+        PB8_PF_SD2_CMD,
+        PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
         .width = 2,
@@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = {
         .resource = &mx27ads_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-        PE12_PF_UART1_TXD,
-        PE13_PF_UART1_RXD,
-        PE14_PF_UART1_CTS,
-        PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+        .bitrate = 100000,
 };
 
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-                        ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-                        ARRAY_SIZE(mxc_uart0_pins));
-        return 0;
-}
-
-static int mxc_uart1_pins[] = {
-        PE3_PF_UART2_CTS,
-        PE4_PF_UART2_RTS,
-        PE6_PF_UART2_TXD,
-        PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
 };
 
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
 {
-        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins), "UART1");
+        if (on)
+                __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+        else
+                __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins));
-        return 0;
-}
-
-static int mxc_uart2_pins[] = {
-        PE8_PF_UART3_TXD,
-        PE9_PF_UART3_RXD,
-        PE10_PF_UART3_CTS,
-        PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+        .pixclock       = 188679,
+        .xres           = 240,
+        .yres           = 320,
+
+        .bpp            = 16,
+        .hsync_len      = 1,
+        .left_margin    = 9,
+        .right_margin   = 16,
+
+        .vsync_len      = 1,
+        .upper_margin   = 7,
+        .lower_margin   = 9,
+        .fixed_screen_cpu = 0,
+
+        /*
+         * - HSYNC active high
+         * - VSYNC active high
+         * - clk notenabled while idle
+         * - clock inverted
+         * - data not inverted
+         * - data enable low active
+         * - enable sharp mode
+         */
+        .pcr            = 0xFB008BC0,
+        .pwmr           = 0x00A903FF,
+        .lscr1          = 0x00120300,
+        .dmacr          = 0x00020010,
+
+        .lcd_power      = lcd_power,
 };
 
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+                              void *data)
 {
-        return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-                        ARRAY_SIZE(mxc_uart2_pins), "UART2");
+        return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+                           "sdhc1-card-detect", data);
 }
 
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+                              void *data)
 {
-        mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-                        ARRAY_SIZE(mxc_uart2_pins));
-        return 0;
+        return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+                           "sdhc2-card-detect", data);
 }
 
-static int mxc_uart3_pins[] = {
-        PB26_AF_UART4_RTS,
-        PB28_AF_UART4_TXD,
-        PB29_AF_UART4_CTS,
-        PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
 {
-        return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-                        ARRAY_SIZE(mxc_uart3_pins), "UART3");
+        free_irq(IRQ_GPIOE(21), data);
 }
 
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 {
-        mxc_gpio_release_multiple_pins(mxc_uart3_pins,
-                        ARRAY_SIZE(mxc_uart3_pins));
-        return 0;
+        free_irq(IRQ_GPIOB(7), data);
 }
 
-static int mxc_uart4_pins[] = {
-        PB18_AF_UART5_TXD,
-        PB19_AF_UART5_RXD,
-        PB20_AF_UART5_CTS,
-        PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+        .init = mx27ads_sdhc1_init,
+        .exit = mx27ads_sdhc1_exit,
 };
 
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-                        ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart4_pins,
-                        ARRAY_SIZE(mxc_uart4_pins));
-        return 0;
-}
-
-static int mxc_uart5_pins[] = {
-        PB10_AF_UART6_TXD,
-        PB12_AF_UART6_CTS,
-        PB11_AF_UART6_RXD,
-        PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+        .init = mx27ads_sdhc2_init,
+        .exit = mx27ads_sdhc2_exit,
 };
 
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-                        ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart5_pins,
-                        ARRAY_SIZE(mxc_uart5_pins));
-        return 0;
-}
-
 static struct platform_device *platform_devices[] __initdata = {
         &mx27ads_nor_mtd_device,
         &mxc_fec_device,
+        &mxc_w1_master_device,
 };
 
-static int mxc_fec_pins[] = {
-        PD0_AIN_FEC_TXD0,
-        PD1_AIN_FEC_TXD1,
-        PD2_AIN_FEC_TXD2,
-        PD3_AIN_FEC_TXD3,
-        PD4_AOUT_FEC_RX_ER,
-        PD5_AOUT_FEC_RXD1,
-        PD6_AOUT_FEC_RXD2,
-        PD7_AOUT_FEC_RXD3,
-        PD8_AF_FEC_MDIO,
-        PD9_AIN_FEC_MDC,
-        PD10_AOUT_FEC_CRS,
-        PD11_AOUT_FEC_TX_CLK,
-        PD12_AOUT_FEC_RXD0,
-        PD13_AOUT_FEC_RX_DV,
-        PD14_AOUT_FEC_RX_CLK,
-        PD15_AOUT_FEC_COL,
-        PD16_AIN_FEC_TX_ER,
-        PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-        mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-                        ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
         {
-                .init = uart_mxc_port0_init,
-                .exit = uart_mxc_port0_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart_mxc_port1_init,
-                .exit = uart_mxc_port1_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart_mxc_port2_init,
-                .exit = uart_mxc_port2_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart_mxc_port3_init,
-                .exit = uart_mxc_port3_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart_mxc_port4_init,
-                .exit = uart_mxc_port4_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart_mxc_port5_init,
-                .exit = uart_mxc_port5_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         },
 };
 
 static void __init mx27ads_board_init(void)
 {
-        gpio_fec_active();
+        mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+                        "mx27ads");
 
         mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
         mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
@@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void)
         mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
         mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
         mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+        mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+        /* only the i2c master 1 is used on this CPU card */
+        i2c_register_board_info(1, mx27ads_i2c_devices,
+                                ARRAY_SIZE(mx27ads_i2c_devices));
+        mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+        mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+        mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+        mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
 
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 
 static void __init mx27ads_map_io(void)
 {
-        mxc_map_io();
+        mx27_map_io();
         iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
new file mode 100644
index 000000000000..90b1fa5d1849
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+        /* UART1 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+        &mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+        mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+                "mx27pdk");
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+        mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+        .init   = mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+        /* maintainer: Freescale Semiconductor, Inc. */
+        .phys_io        = AIPI_BASE_ADDR,
+        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mxc_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = mx27pdk_init,
+        .timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index aa4eaa61d1b5..a4628d004343 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -17,28 +17,84 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
 #include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
 #include <mach/mxc_nand.h>
 
 #include "devices.h"
 
+static int pcm038_pins[] = {
+        /* UART1 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* UART2 */
+        PE3_PF_UART2_CTS,
+        PE4_PF_UART2_RTS,
+        PE6_PF_UART2_TXD,
+        PE7_PF_UART2_RXD,
+        /* UART3 */
+        PE8_PF_UART3_TXD,
+        PE9_PF_UART3_RXD,
+        PE10_PF_UART3_CTS,
+        PE11_PF_UART3_RTS,
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+        /* I2C2 */
+        PC5_PF_I2C2_SDA,
+        PC6_PF_I2C2_SCL,
+        /* SPI1 */
+        PD25_PF_CSPI1_RDY,
+        PD27_PF_CSPI1_SS1,
+        PD28_PF_CSPI1_SS0,
+        PD29_PF_CSPI1_SCLK,
+        PD30_PF_CSPI1_MISO,
+        PD31_PF_CSPI1_MOSI,
+        /* SSI1 */
+        PC20_PF_SSI1_FS,
+        PC21_PF_SSI1_RXD,
+        PC22_PF_SSI1_TXD,
+        PC23_PF_SSI1_CLK,
+        /* SSI4 */
+        PC16_PF_SSI4_FS,
+        PC17_PF_SSI4_RXD,
+        PC18_PF_SSI4_TXD,
+        PC19_PF_SSI4_CLK,
+};
+
 /*
  * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
  * 16 bit width
@@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = {
         .resource = &pcm038_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-        PE12_PF_UART1_TXD,
-        PE13_PF_UART1_RXD,
-        PE14_PF_UART1_CTS,
-        PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-                        ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-                        ARRAY_SIZE(mxc_uart0_pins));
-        return 0;
-}
-
-static int mxc_uart1_pins[] = {
-        PE3_PF_UART2_CTS,
-        PE4_PF_UART2_RTS,
-        PE6_PF_UART2_TXD,
-        PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins));
-        return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
-                                PE9_PF_UART3_RXD,
-                                PE10_PF_UART3_CTS,
-                                PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-                        ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-                        ARRAY_SIZE(mxc_uart2_pins));
-        return 0;
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
         {
-                .init = uart_mxc_port0_init,
-                .exit = uart_mxc_port0_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart_mxc_port1_init,
-                .exit = uart_mxc_port1_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         }, {
-                .init = uart_mxc_port2_init,
-                .exit = uart_mxc_port2_exit,
                 .flags = IMXUART_HAVE_RTSCTS,
         },
 };
 
-static int mxc_fec_pins[] = {
-        PD0_AIN_FEC_TXD0,
-        PD1_AIN_FEC_TXD1,
-        PD2_AIN_FEC_TXD2,
-        PD3_AIN_FEC_TXD3,
-        PD4_AOUT_FEC_RX_ER,
-        PD5_AOUT_FEC_RXD1,
-        PD6_AOUT_FEC_RXD2,
-        PD7_AOUT_FEC_RXD3,
-        PD8_AF_FEC_MDIO,
-        PD9_AIN_FEC_MDC,
-        PD10_AOUT_FEC_CRS,
-        PD11_AOUT_FEC_TX_CLK,
-        PD12_AOUT_FEC_RXD0,
-        PD13_AOUT_FEC_RX_DV,
-        PD14_AOUT_FEC_RX_CLK,
-        PD15_AOUT_FEC_COL,
-        PD16_AIN_FEC_TX_ER,
-        PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-        mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-                        ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct mxc_nand_platform_data pcm038_nand_board_info = {
         .width = 1,
         .hw_ecc = 1,
@@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void)
         __raw_writel(0x22220a00, CSCR_A(1));
 }
 
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
-        PC5_PF_I2C2_SDA,
-        PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
-                        "I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
-        mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
         .bitrate = 100000,
-        .init = pcm038_i2c_1_init,
-        .exit = pcm038_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
                 .type = "lm75"
         }
 };
-#endif
 
 static void __init pcm038_init(void)
 {
-        gpio_fec_active();
+        mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+                        "PCM038");
+
         pcm038_init_sram();
 
         mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
@@ -267,13 +214,11 @@ static void __init pcm038_init(void)
         mxc_gpio_mode(PE16_AF_OWIRE);
         mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
-#ifdef CONFIG_I2C_IMX
         /* only the i2c master 1 is used on this CPU card */
         i2c_register_board_info(1, pcm038_i2c_devices,
                                 ARRAY_SIZE(pcm038_i2c_devices));
 
         mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
 
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
@@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
         .phys_io        = AIPI_BASE_ADDR,
         .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx27_map_io,
         .init_irq       = mxc_init_irq,
         .init_machine   = pcm038_init,
         .timer          = &pcm038_timer,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index bf4e520bc1bc..6a3acaf57dd4 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -16,71 +16,107 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
 #include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-        return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+        /* SDHC */
         PB4_PF_SD2_D0,
         PB5_PF_SD2_D1,
         PB6_PF_SD2_D2,
         PB7_PF_SD2_D3,
         PB8_PF_SD2_CMD,
         PB9_PF_SD2_CLK,
+        GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+        /* display */
+        PA5_PF_LSCLK,
+        PA6_PF_LD0,
+        PA7_PF_LD1,
+        PA8_PF_LD2,
+        PA9_PF_LD3,
+        PA10_PF_LD4,
+        PA11_PF_LD5,
+        PA12_PF_LD6,
+        PA13_PF_LD7,
+        PA14_PF_LD8,
+        PA15_PF_LD9,
+        PA16_PF_LD10,
+        PA17_PF_LD11,
+        PA18_PF_LD12,
+        PA19_PF_LD13,
+        PA20_PF_LD14,
+        PA21_PF_LD15,
+        PA22_PF_LD16,
+        PA23_PF_LD17,
+        PA24_PF_REV,
+        PA25_PF_CLS,
+        PA26_PF_PS,
+        PA27_PF_SPL_SPR,
+        PA28_PF_HSYNC,
+        PA29_PF_VSYNC,
+        PA30_PF_CONTRAST,
+        PA31_PF_OE_ACD,
+        /*
+         * it seems the data line misses a pullup, so we must enable
+         * the internal pullup as a local workaround
+         */
+        PD17_PF_I2C_DATA | GPIO_PUEN,
+        PD18_PF_I2C_CLK,
+        /* Camera */
+        PB10_PF_CSI_D0,
+        PB11_PF_CSI_D1,
+        PB12_PF_CSI_D2,
+        PB13_PF_CSI_D3,
+        PB14_PF_CSI_D4,
+        PB15_PF_CSI_MCLK,
+        PB16_PF_CSI_PIXCLK,
+        PB17_PF_CSI_D5,
+        PB18_PF_CSI_D6,
+        PB19_PF_CSI_D7,
+        PB20_PF_CSI_VSYNC,
+        PB21_PF_CSI_HSYNC,
 };
 
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+        return gpio_get_value(GPIO_PORTC + 28);
+}
+
 static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
 {
         int ret;
 
-        ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
-                ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
-        if(ret)
-                return ret;
-
-        ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+        ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
                                 "imx-mmc-detect", data);
         if (ret)
-                goto out_release_gpio;
-
-        set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+                return ret;
 
         ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-        if (ret)
-                goto out_release_gpio;
+        if (ret) {
+                free_irq(IRQ_GPIOC(29), data);
+                return ret;
+        }
 
-        mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
         gpio_direction_input(GPIO_PORTC + 28);
 
         return 0;
-
-out_release_gpio:
-        mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-                        ARRAY_SIZE(pcm970_sdhc2_pins));
-        return ret;
 }
 
 static void pcm970_sdhc2_exit(struct device *dev, void *data)
 {
         free_irq(IRQ_GPIOC(29), data);
         gpio_free(GPIO_PORTC + 28);
-        mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-                        ARRAY_SIZE(pcm970_sdhc2_pins));
 }
 
 static struct imxmmc_platform_data sdhc_pdata = {
@@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = {
         .exit = pcm970_sdhc2_exit,
 };
 
-static int mxc_fb_pins[] = {
-        PA5_PF_LSCLK,   PA6_PF_LD0,     PA7_PF_LD1,     PA8_PF_LD2,
-        PA9_PF_LD3,     PA10_PF_LD4,    PA11_PF_LD5,    PA12_PF_LD6,
-        PA13_PF_LD7,    PA14_PF_LD8,    PA15_PF_LD9,    PA16_PF_LD10,
-        PA17_PF_LD11,   PA18_PF_LD12,   PA19_PF_LD13,   PA20_PF_LD14,
-        PA21_PF_LD15,   PA22_PF_LD16,   PA23_PF_LD17,   PA24_PF_REV,
-        PA25_PF_CLS,    PA26_PF_PS,     PA27_PF_SPL_SPR, PA28_PF_HSYNC,
-        PA29_PF_VSYNC,  PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
-                        ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
-        return 0;
-}
-
 /*
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DH06
@@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
         .pwmr           = 0x00A903FF,
         .lscr1          = 0x00120300,
         .dmacr          = 0x00020010,
-
-        .init = pcm038_fb_init,
-        .exit = pcm038_fb_exit,
 };
 
 /*
@@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = {
  */
 void __init pcm970_baseboard_init(void)
 {
+        mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+                        "PCM970");
+
         mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
         mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 194b8428bba4..32e45155089a 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,10 +1,12 @@
 if ARCH_MX3
 
 config ARCH_MX31
+        select ARCH_HAS_RNGA
         bool
 
 config ARCH_MX35
         bool
+        select ARCH_MXC_IOMUX_V3
 
 comment "MX3 platforms:"
 
@@ -66,4 +68,11 @@ config MACH_QONG
           Include support for Dave/DENX QongEVB-LITE platform. This includes
           specific configurations for the board and its peripherals.
 
+config MACH_PCM043
+        bool "Support Phytec pcm043 (i.MX35) platforms"
+        select ARCH_MX35
+        help
+          Include support for Phytec pcm043 platform. This includes
+          specific configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 272c8a953b30..cd6547b61b1e 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)  += mx31moboard.o mx31moboard-devboard.o \
                                    mx31moboard-marxbot.o
 obj-$(CONFIG_MACH_QONG)         += qong.o
+obj-$(CONFIG_MACH_PCM043)       += pcm043.o
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 53a112d4e04a..0d76521cb491 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = {
         { .arm = 0, .ahb = 0, .sel = 0},
 };
 
-static struct arm_ahb_div clk_automotive[] = {
-        { .arm = 1, .ahb = 3, .sel = 0},
-        { .arm = 1, .ahb = 2, .sel = 1},
-        { .arm = 2, .ahb = 1, .sel = 1},
-        { .arm = 0, .ahb = 0, .sel = 0},
-        { .arm = 1, .ahb = 6, .sel = 0},
-        { .arm = 1, .ahb = 4, .sel = 1},
-        { .arm = 2, .ahb = 2, .sel = 1},
-        { .arm = 0, .ahb = 0, .sel = 0},
-};
-
 static unsigned long get_rate_arm(void)
 {
         unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
         struct arm_ahb_div *aad;
         unsigned long fref = get_rate_mpll();
 
-        if (pdr0 & 1) {
-                /* consumer path */
-                aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-                if (aad->sel)
-                        fref = fref * 2 / 3;
-        } else {
-                /* auto path */
-                aad = &clk_automotive[(pdr0 >> 9) & 0x7];
-                if (aad->sel)
-                        fref = fref * 3 / 4;
-        }
+        aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+        if (aad->sel)
+                fref = fref * 2 / 3;
+
         return fref / aad->arm;
 }
 
@@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
         struct arm_ahb_div *aad;
         unsigned long fref = get_rate_mpll();
 
-        if (pdr0 & 1)
-                /* consumer path */
-                aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-        else
-                /* auto path */
-                aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+        aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
         return fref / aad->ahb;
 }
@@ -430,7 +407,8 @@ static struct clk_lookup lookups[] __initdata = {
         _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
         _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
         _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-        _REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+        _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+        _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
         _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
         _REGISTER_CLOCK(NULL, "mlb", mlb_clk)
         _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
@@ -462,8 +440,6 @@ int __init mx35_clocks_init()
         int i;
         unsigned int ll = 0;
 
-        mxc_set_cpu_type(MXC_CPU_MX35);
-
 #ifdef CONFIG_DEBUG_LL_CONSOLE
         ll = (3 << 16);
 #endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 9957a11533a4..28bd11dc89b8 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -566,8 +566,6 @@ int __init mx31_clocks_init(unsigned long fref)
         u32 reg;
         int i;
 
-        mxc_set_cpu_type(MXC_CPU_MX31);
-
         ckih_rate = fref;
 
         for (i = 0; i < ARRAY_SIZE(lookups); i++)
@@ -581,6 +579,12 @@ int __init mx31_clocks_init(unsigned long fref)
                                            MX32, but still required to be set */
                      MXC_CCM_CGR2);
 
+        /*
+         * Before turning off usb_pll make sure ipg_per_clk is generated
+         * by ipg_clk and not usb_pll.
+         */
+        __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
         usb_pll_disable(&usb_pll_clk);
 
         pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 380be0c9b213..d927eddcad46 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -17,13 +17,17 @@
  * Boston, MA  02110-1301, USA.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/common.h>
 #include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
 
 #include "devices.h"
 
@@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = {
         .num_resources = ARRAY_SIZE(mxcsdhc1_resources),
         .resource = mxcsdhc1_resources,
 };
+
+static struct resource rnga_resources[] = {
+        {
+                .start = RNGA_BASE_ADDR,
+                .end = RNGA_BASE_ADDR + 0x28,
+                .flags = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device mxc_rnga_device = {
+        .name = "mxc_rnga",
+        .id = -1,
+        .num_resources = 1,
+        .resource = rnga_resources,
+};
 #endif /* CONFIG_ARCH_MX31 */
 
 /* i.MX31 Image Processing Unit */
@@ -329,10 +348,54 @@ struct platform_device mx3_fb = {
         .num_resources  = ARRAY_SIZE(fb_resources),
         .resource       = fb_resources,
         .dev            = {
-                .coherent_dma_mask = 0xffffffff,
+                .coherent_dma_mask = DMA_BIT_MASK(32),
        },
 };
 
+static struct resource camera_resources[] = {
+        {
+                .start  = IPU_CTRL_BASE_ADDR + 0x60,
+                .end    = IPU_CTRL_BASE_ADDR + 0x87,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device mx3_camera = {
+        .name           = "mx3-camera",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(camera_resources),
+        .resource       = camera_resources,
+        .dev            = {
+                .coherent_dma_mask = DMA_BIT_MASK(32),
+        },
+};
+
+static struct resource otg_resources[] = {
+        {
+                .start  = OTG_BASE_ADDR,
+                .end    = OTG_BASE_ADDR + 0x1ff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = MXC_INT_USB3,
+                .end    = MXC_INT_USB3,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+        .name           = "fsl-usb2-udc",
+        .id             = -1,
+        .dev            = {
+                .dma_mask               = &otg_dmamask,
+                .coherent_dma_mask      = DMA_BIT_MASK(32),
+        },
+        .resource       = otg_resources,
+        .num_resources  = ARRAY_SIZE(otg_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
         {
@@ -359,6 +422,7 @@ static int mx3_devices_init(void)
         if (cpu_is_mx31()) {
                 mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
                 mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+                mxc_register_device(&mxc_rnga_device, NULL);
         }
         if (cpu_is_mx35()) {
                 mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 88c04b296fab..475410ada60a 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,6 +11,8 @@ extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 40ffc5a664d9..c66ccbcdc11b 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
- * setups a single pin:
+ * allocs a single pin:
  *      - reserves the pin so that it is not claimed by another driver
  *      - setups the iomux according to the configuration
- *      - if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
 {
         unsigned pad = pin & IOMUX_PADNUM_MASK;
-        unsigned gpio;
 
         if (pad >= (PIN_MAX + 1)) {
                 printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
@@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
         if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
                 printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
                         pad, label ? label : "?");
-                return -EINVAL;
+                return -EBUSY;
         }
         mxc_iomux_mode(pin);
 
-        /* if we have a gpio, we can allocate it */
-        gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-        if (gpio < (GPIO_PORT_MAX + 1) * 32)
-                if (gpio_request(gpio, label))
-                        return -EINVAL;
-
         return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
 int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
                 const char *label)
@@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
         int ret = -EINVAL;
 
         for (i = 0; i < count; i++) {
-                if (mxc_iomux_setup_pin(*p, label))
+                ret = mxc_iomux_alloc_pin(*p, label);
+                if (ret)
                         goto setup_error;
                 p++;
         }
@@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 void mxc_iomux_release_pin(const unsigned int pin)
 {
         unsigned pad = pin & IOMUX_PADNUM_MASK;
-        unsigned gpio;
 
         if (pad < (PIN_MAX + 1))
                 clear_bit(pad, mxc_pin_alloc_map);
-
-        gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-        if (gpio < (GPIO_PORT_MAX + 1) * 32)
-                gpio_free(gpio);
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 9e1459cb4b74..1f5fdd456cb9 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
 {
+        mxc_set_cpu_type(MXC_CPU_MX31);
+
+        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+        mxc_set_cpu_type(MXC_CPU_MX35);
+
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a6d6efefa6aa..30e2767a78ae 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void)
         /*
          * Configure INT line as GPIO input
          */
-        mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+        mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
         /* disable the interrupt and clear the status */
         __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
  */
 static void __init mx31ads_map_io(void)
 {
-        mxc_map_io();
+        mx31_map_io();
         iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 894d98cd9941..86fe70fa3e13 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -22,6 +22,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,11 +35,64 @@
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
 
 /*
  * This file contains the board-specific initialization routines.
  */
 
+static unsigned int mx31lite_pins[] = {
+        /* UART1 */
+        MX31_PIN_CTS1__CTS1,
+        MX31_PIN_RTS1__RTS1,
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1,
+        /* LAN9117 IRQ pin */
+        IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+        .flags          = SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+        [0] = {
+                .start          = CS4_BASE_ADDR,
+                .end            = CS4_BASE_ADDR + 0x100,
+                .flags          = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start          = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+                .end            = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+                .flags          = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device smsc911x_device = {
+        .name           = "smsc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smsc911x_resources),
+        .resource       = smsc911x_resources,
+        .dev            = {
+                .platform_data = &smsc911x_config,
+        },
+};
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
  */
 void __init mx31lite_map_io(void)
 {
-        mxc_map_io();
+        mx31_map_io();
         iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
@@ -68,6 +124,22 @@ void __init mx31lite_map_io(void)
  */
 static void __init mxc_board_init(void)
 {
+        int ret;
+
+        mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+                                      "mx31lite");
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+        /* SMSC9117 IRQ pin */
+        ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+        if (ret)
+                pr_warning("could not get LAN irq gpio\n");
+        else {
+                gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+                platform_device_register(&smsc911x_device);
+        }
 }
 
 static void __init mx31lite_timer_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index d080b4add79c..4704405165a1 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,33 +16,142 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int devboard_pins[] = {
+        /* UART1 */
+        MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+        MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+        /* SDHC2 */
+        MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+        MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+        MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+        MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+        /* USB OTG */
+        MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+        MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+        MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+        MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+        MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+        MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+        MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+        MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+        MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+        MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+        MX31_PIN_USB_OC__GPIO1_30,
+};
+
 static struct imxuart_platform_data uart_pdata = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int mxc_uart1_pins[] = {
-        MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-        MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+        return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+                void *data)
+{
+        int ret;
+
+        ret = gpio_request(SDHC2_CD, "sdhc-detect");
+        if (ret)
+                return ret;
+
+        gpio_direction_input(SDHC2_CD);
+
+        ret = gpio_request(SDHC2_WP, "sdhc-wp");
+        if (ret)
+                goto err_gpio_free;
+        gpio_direction_input(SDHC2_WP);
+
+        ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                "sdhc2-card-detect", data);
+        if (ret)
+                goto err_gpio_free_2;
+
+        return 0;
+
+err_gpio_free_2:
+        gpio_free(SDHC2_WP);
+err_gpio_free:
+        gpio_free(SDHC2_CD);
+
+        return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+        free_irq(gpio_to_irq(SDHC2_CD), data);
+        gpio_free(SDHC2_WP);
+        gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+        .get_ro = devboard_sdhc2_get_ro,
+        .init   = devboard_sdhc2_init,
+        .exit   = devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
 };
 
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+        gpio_request(OTG_EN_B, "usb-udc-en");
+        gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_devboard_init(void)
 {
         printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-        mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+        mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+                "devboard");
+
         mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+        mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+        devboard_usbotg_init();
+        mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 9ef9566823fb..641c3d6153ae 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,22 +16,144 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int marxbot_pins[] = {
+        /* SDHC2 */
+        MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+        MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+        MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+        MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+        /* CSI */
+        MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+        MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+        MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+        MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+        MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+        MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+        MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+        MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+        MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+        MX31_PIN_TXD2__GPIO1_28,
+        /* USB OTG */
+        MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+        MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+        MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+        MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+        MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+        MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+        MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+        MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+        MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+        MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+        MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+        return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+                void *data)
+{
+        int ret;
+
+        ret = gpio_request(SDHC2_CD, "sdhc-detect");
+        if (ret)
+                return ret;
+
+        gpio_direction_input(SDHC2_CD);
+
+        ret = gpio_request(SDHC2_WP, "sdhc-wp");
+        if (ret)
+                goto err_gpio_free;
+        gpio_direction_input(SDHC2_WP);
+
+        ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                "sdhc2-card-detect", data);
+        if (ret)
+                goto err_gpio_free_2;
+
+        return 0;
+
+err_gpio_free_2:
+        gpio_free(SDHC2_WP);
+err_gpio_free:
+        gpio_free(SDHC2_CD);
+
+        return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+        free_irq(gpio_to_irq(SDHC2_CD), data);
+        gpio_free(SDHC2_WP);
+        gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+        .get_ro = marxbot_sdhc2_get_ro,
+        .init   = marxbot_sdhc2_init,
+        .exit   = marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+        gpio_request(OTG_EN_B, "usb-udc-en");
+        gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_marxbot_init(void)
 {
         printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+        mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+                "marxbot");
+
+        mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+        marxbot_usbotg_init();
+        mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 34c2a1b99d4f..a17f2e411609 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,26 +16,47 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int moboard_pins[] = {
+        /* UART0 */
+        MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+        MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+        /* UART4 */
+        MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+        MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+        /* I2C0 */
+        MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+        /* I2C1 */
+        MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+        /* SDHC1 */
+        MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+        MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+        MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+        MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
 static struct physmap_flash_data mx31moboard_flash_data = {
         .width          = 2,
 };
@@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct platform_device *devices[] __initdata = {
-        &mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+        .bitrate = 400000,
 };
 
-static int mxc_uart0_pins[] = {
-        MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
-        MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+        .bitrate = 100000,
 };
-static int mxc_uart4_pins[] = {
-        MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-        MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+        return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+                void *data)
+{
+        int ret;
+
+        ret = gpio_request(SDHC1_CD, "sdhc-detect");
+        if (ret)
+                return ret;
+
+        gpio_direction_input(SDHC1_CD);
+
+        ret = gpio_request(SDHC1_WP, "sdhc-wp");
+        if (ret)
+                goto err_gpio_free;
+        gpio_direction_input(SDHC1_WP);
+
+        ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                "sdhc1-card-detect", data);
+        if (ret)
+                goto err_gpio_free_2;
+
+        return 0;
+
+err_gpio_free_2:
+        gpio_free(SDHC1_WP);
+err_gpio_free:
+        gpio_free(SDHC1_CD);
+
+        return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+        free_irq(gpio_to_irq(SDHC1_CD), data);
+        gpio_free(SDHC1_WP);
+        gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+        .get_ro = moboard_sdhc1_get_ro,
+        .init   = moboard_sdhc1_init,
+        .exit   = moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &mx31moboard_flash,
 };
 
 static int mx31moboard_baseboard;
@@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mxc_board_init(void)
 {
+        mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+                "moboard");
+
         platform_add_devices(devices, ARRAY_SIZE(devices));
 
-        mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-        mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
         mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+        mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+        mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+        mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
         switch (mx31moboard_baseboard) {
         case MX31NOBOARD:
                 break;
@@ -99,7 +177,8 @@ static void __init mxc_board_init(void)
                 mx31moboard_marxbot_init();
                 break;
         default:
-                printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+                printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+                        mx31moboard_baseboard);
         }
 }
 
@@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
         .phys_io        = AIPS1_BASE_ADDR,
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx31_map_io,
         .init_irq       = mxc_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index bc63f1785691..32599e507534 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -41,21 +42,159 @@
  * @ingroup System
  */
 
+static int mx31pdk_pins[] = {
+        /* UART1 */
+        MX31_PIN_CTS1__CTS1,
+        MX31_PIN_RTS1__RTS1,
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1,
+        IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
 static struct imxuart_platform_data uart_pdata = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
-        MX31_PIN_CTS1__CTS1,
-        MX31_PIN_RTS1__RTS1,
-        MX31_PIN_TXD1__TXD1,
-        MX31_PIN_RXD1__RXD1
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+{
+        uint32_t imr_val;
+        uint32_t int_valid;
+        uint32_t expio_irq;
+
+        imr_val = __raw_readw(CPLD_INT_MASK_REG);
+        int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+        expio_irq = MXC_EXP_IO_BASE;
+        for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+                if ((int_valid & 1) == 0)
+                        continue;
+                generic_handle_irq(expio_irq);
+        }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+        uint16_t reg;
+        uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+        /* mask the interrupt */
+        reg = __raw_readw(CPLD_INT_MASK_REG);
+        reg |= 1 << expio;
+        __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+        uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+        /* clear the interrupt status */
+        __raw_writew(1 << expio, CPLD_INT_RESET_REG);
+        __raw_writew(0, CPLD_INT_RESET_REG);
+        /* mask the interrupt */
+        expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+        uint16_t reg;
+        uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+        /* unmask the interrupt */
+        reg = __raw_readw(CPLD_INT_MASK_REG);
+        reg &= ~(1 << expio);
+        __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+        .ack = expio_ack_irq,
+        .mask = expio_mask_irq,
+        .unmask = expio_unmask_irq,
 };
 
-static inline void mxc_init_imx_uart(void)
+static int __init mx31pdk_init_expio(void)
 {
-        mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        int i;
+        int ret;
+
+        /* Check if there's a debug board connected */
+        if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+            (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+            (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+                /* No Debug board found */
+                return -ENODEV;
+        }
+
+        pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+                __raw_readw(CPLD_CODE_VER_REG));
+
+        /*
+         * Configure INT line as GPIO input
+         */
+        ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+        if (ret)
+                pr_warning("could not get LAN irq gpio\n");
+        else
+                gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+        /* Disable the interrupts and clear the status */
+        __raw_writew(0, CPLD_INT_MASK_REG);
+        __raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+        __raw_writew(0, CPLD_INT_RESET_REG);
+        __raw_writew(0x1F, CPLD_INT_MASK_REG);
+        for (i = MXC_EXP_IO_BASE;
+             i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+             i++) {
+                set_irq_chip(i, &expio_irq_chip);
+                set_irq_handler(i, handle_level_irq);
+                set_irq_flags(i, IRQF_VALID);
+        }
+        set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+        set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+        return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+        {
+                .virtual = SPBA0_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+                .length = SPBA0_SIZE,
+                .type = MT_DEVICE_NONSHARED,
+        }, {
+                .virtual = CS5_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(CS5_BASE_ADDR),
+                .length = CS5_SIZE,
+                .type = MT_DEVICE,
+        },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+        mx31_map_io();
+        iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
 }
 
 /*!
@@ -63,7 +202,12 @@ static inline void mxc_init_imx_uart(void)
  */
 static void __init mxc_board_init(void)
 {
-        mxc_init_imx_uart();
+        mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+                                      "mx31pdk");
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+        mx31pdk_init_expio();
 }
 
 static void __init mx31pdk_timer_init(void)
@@ -84,7 +228,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
         .phys_io        = AIPS1_BASE_ADDR,
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx31pdk_map_io,
         .init_irq       = mxc_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b5227d837b2f..c6f61a1f06c8 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -28,6 +28,10 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,7 +41,9 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #ifdef CONFIG_I2C_IMX
@@ -46,6 +52,76 @@
 
 #include "devices.h"
 
+static unsigned int pcm037_pins[] = {
+        /* I2C */
+        MX31_PIN_CSPI2_MOSI__SCL,
+        MX31_PIN_CSPI2_MISO__SDA,
+        /* SDHC1 */
+        MX31_PIN_SD1_DATA3__SD1_DATA3,
+        MX31_PIN_SD1_DATA2__SD1_DATA2,
+        MX31_PIN_SD1_DATA1__SD1_DATA1,
+        MX31_PIN_SD1_DATA0__SD1_DATA0,
+        MX31_PIN_SD1_CLK__SD1_CLK,
+        MX31_PIN_SD1_CMD__SD1_CMD,
+        IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+        IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+        /* SPI1 */
+        MX31_PIN_CSPI1_MOSI__MOSI,
+        MX31_PIN_CSPI1_MISO__MISO,
+        MX31_PIN_CSPI1_SCLK__SCLK,
+        MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+        MX31_PIN_CSPI1_SS0__SS0,
+        MX31_PIN_CSPI1_SS1__SS1,
+        MX31_PIN_CSPI1_SS2__SS2,
+        /* UART1 */
+        MX31_PIN_CTS1__CTS1,
+        MX31_PIN_RTS1__RTS1,
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1,
+        /* UART2 */
+        MX31_PIN_TXD2__TXD2,
+        MX31_PIN_RXD2__RXD2,
+        MX31_PIN_CTS2__CTS2,
+        MX31_PIN_RTS2__RTS2,
+        /* UART3 */
+        MX31_PIN_CSPI3_MOSI__RXD3,
+        MX31_PIN_CSPI3_MISO__TXD3,
+        MX31_PIN_CSPI3_SCLK__RTS3,
+        MX31_PIN_CSPI3_SPI_RDY__CTS3,
+        /* LAN9217 irq pin */
+        IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+        /* Onewire */
+        MX31_PIN_BATT_LINE__OWIRE,
+        /* Framebuffer */
+        MX31_PIN_LD0__LD0,
+        MX31_PIN_LD1__LD1,
+        MX31_PIN_LD2__LD2,
+        MX31_PIN_LD3__LD3,
+        MX31_PIN_LD4__LD4,
+        MX31_PIN_LD5__LD5,
+        MX31_PIN_LD6__LD6,
+        MX31_PIN_LD7__LD7,
+        MX31_PIN_LD8__LD8,
+        MX31_PIN_LD9__LD9,
+        MX31_PIN_LD10__LD10,
+        MX31_PIN_LD11__LD11,
+        MX31_PIN_LD12__LD12,
+        MX31_PIN_LD13__LD13,
+        MX31_PIN_LD14__LD14,
+        MX31_PIN_LD15__LD15,
+        MX31_PIN_LD16__LD16,
+        MX31_PIN_LD17__LD17,
+        MX31_PIN_VSYNC3__VSYNC3,
+        MX31_PIN_HSYNC__HSYNC,
+        MX31_PIN_FPSHIFT__FPSHIFT,
+        MX31_PIN_DRDY0__DRDY0,
+        MX31_PIN_D3_REV__D3_REV,
+        MX31_PIN_CONTRAST__CONTRAST,
+        MX31_PIN_D3_SPL__D3_SPL,
+        MX31_PIN_D3_CLS__D3_CLS,
+        MX31_PIN_LCS0__GPI03_23,
+};
+
 static struct physmap_flash_data pcm037_flash_data = {
         .width  = 2,
 };
@@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = {
         .flags  = IORESOURCE_MEM,
 };
 
+static int usbotg_pins[] = {
+        MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+        MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+        MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+        MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+        MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+        MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+        MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+        MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+        MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+        MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+        MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+        MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+        int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+                                        ARRAY_SIZE(usbotg_pins), "usbotg");
+
+        if (ret < 0) {
+                printk(KERN_ERR "Cannot set up OTG pins\n");
+                return ret;
+        }
+
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+        return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device pcm037_flash = {
         .name   = "physmap-flash",
         .id     = 0,
@@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 };
 
 #ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
-        MX31_PIN_CSPI2_MOSI__SCL,
-        MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
-        return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
-                        "i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
-        mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
         .bitrate = 100000,
-        .init = pcm037_i2c_1_init,
-        .exit = pcm037_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 };
 #endif
 
-static int sdhc1_pins[] = {
-        MX31_PIN_SD1_DATA3__SD1_DATA3,
-        MX31_PIN_SD1_DATA2__SD1_DATA2,
-        MX31_PIN_SD1_DATA1__SD1_DATA1,
-        MX31_PIN_SD1_DATA0__SD1_DATA0,
-        MX31_PIN_SD1_CLK__SD1_CLK,
-        MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+        return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP   IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET  IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+                void *data)
 {
-        return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
-                                "sdhc-1");
+        int ret;
+
+        ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+        if (ret)
+                return ret;
+
+        gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+        ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+        if (ret)
+                goto err_gpio_free;
+        gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+        ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+                        IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+                                "sdhc-detect", data);
+        if (ret)
+                goto err_gpio_free_2;
+
+        return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+        gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+        gpio_free(SDHC1_GPIO_DET);
+
+        return ret;
 }
 
 static void pcm970_sdhc1_exit(struct device *dev, void *data)
 {
-        mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+        free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+        gpio_free(SDHC1_GPIO_DET);
+        gpio_free(SDHC1_GPIO_WP);
 }
 
-/* No card and rw detection at the moment */
 static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+        .get_ro = pcm970_sdhc1_get_ro,
+#endif
         .init = pcm970_sdhc1_init,
         .exit = pcm970_sdhc1_exit,
 };
 
 static struct platform_device *devices[] __initdata = {
         &pcm037_flash,
-        &pcm037_eth,
         &pcm037_sram_device,
 };
 
-static int uart0_pins[] = {
-        MX31_PIN_CTS1__CTS1,
-        MX31_PIN_RTS1__RTS1,
-        MX31_PIN_TXD1__TXD1,
-        MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+        .irq_base = MXC_IPU_IRQ_START,
 };
 
-static int uart2_pins[] = {
-        MX31_PIN_CSPI3_MOSI__RXD3,
-        MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+        {
+                /* 240x320 @ 60 Hz Sharp */
+                .name           = "Sharp-LQ035Q7DH06-QVGA",
+                .refresh        = 60,
+                .xres           = 240,
+                .yres           = 320,
+                .pixclock       = 185925,
+                .left_margin    = 9,
+                .right_margin   = 16,
+                .upper_margin   = 7,
+                .lower_margin   = 9,
+                .hsync_len      = 1,
+                .vsync_len      = 1,
+                .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+                .vmode          = FB_VMODE_NONINTERLACED,
+                .flag           = 0,
+        }, {
+                /* 240x320 @ 60 Hz */
+                .name           = "TX090",
+                .refresh        = 60,
+                .xres           = 240,
+                .yres           = 320,
+                .pixclock       = 38255,
+                .left_margin    = 144,
+                .right_margin   = 0,
+                .upper_margin   = 7,
+                .lower_margin   = 40,
+                .hsync_len      = 96,
+                .vsync_len      = 1,
+                .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+                .vmode          = FB_VMODE_NONINTERLACED,
+                .flag           = 0,
+        },
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+        .dma_dev        = &mx3_ipu.dev,
+        .name           = "Sharp-LQ035Q7DH06-QVGA",
+        .mode           = fb_modedb,
+        .num_modes      = ARRAY_SIZE(fb_modedb),
 };
 
 /*
@@ -215,21 +392,28 @@ static int uart2_pins[] = {
  */
 static void __init mxc_board_init(void)
 {
+        int ret;
+
+        mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+                        "pcm037");
+
         platform_add_devices(devices, ARRAY_SIZE(devices));
 
-        mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-        mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+        mxc_register_device(&mxc_uart_device1, &uart_pdata);
         mxc_register_device(&mxc_uart_device2, &uart_pdata);
 
-        mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
         mxc_register_device(&mxc_w1_master_device, NULL);
 
         /* LAN9217 IRQ pin */
-        if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-                                "pcm037-eth"))
+        ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+        if (ret)
+                pr_warning("could not get LAN irq gpio\n");
+        else {
                 gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+                platform_device_register(&pcm037_eth);
+        }
+
 
 #ifdef CONFIG_I2C_IMX
         i2c_register_board_info(1, pcm037_i2c_devices,
@@ -239,6 +423,10 @@ static void __init mxc_board_init(void)
 #endif
         mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
         mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+        mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+        mxc_register_device(&mx3_fb, &mx3fb_pdata);
+        if (!gpio_usbotg_hs_activate())
+                mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
         .phys_io        = AIPS1_BASE_ADDR,
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx31_map_io,
         .init_irq       = mxc_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
new file mode 100644
index 000000000000..8d27c324abf2
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -0,0 +1,252 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+        {
+                /* 240x320 @ 60 Hz */
+                .name           = "Sharp-LQ035Q7",
+                .refresh        = 60,
+                .xres           = 240,
+                .yres           = 320,
+                .pixclock       = 185925,
+                .left_margin    = 9,
+                .right_margin   = 16,
+                .upper_margin   = 7,
+                .lower_margin   = 9,
+                .hsync_len      = 1,
+                .vsync_len      = 1,
+                .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+                .vmode          = FB_VMODE_NONINTERLACED,
+                .flag           = 0,
+        }, {
+                /* 240x320 @ 60 Hz */
+                .name           = "TX090",
+                .refresh        = 60,
+                .xres           = 240,
+                .yres           = 320,
+                .pixclock       = 38255,
+                .left_margin    = 144,
+                .right_margin   = 0,
+                .upper_margin   = 7,
+                .lower_margin   = 40,
+                .hsync_len      = 96,
+                .vsync_len      = 1,
+                .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+                .vmode          = FB_VMODE_NONINTERLACED,
+                .flag           = 0,
+        },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+        .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+        .dma_dev        = &mx3_ipu.dev,
+        .name           = "Sharp-LQ035Q7",
+        .mode           = fb_modedb,
+        .num_modes      = ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+        .width  = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+        .start  = 0xa0000000,
+        .end    = 0xa1ffffff,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+        .name   = "physmap-flash",
+        .id     = 0,
+        .dev    = {
+                .platform_data  = &pcm043_flash_data,
+        },
+        .resource = &pcm043_flash_resource,
+        .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+        .bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+        .byte_len = 4096,
+        .page_size = 32,
+        .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+       {
+                I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+                .platform_data = &board_eeprom,
+        }, {
+                I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+                .type = "pcf8563",
+        }
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+        &pcm043_flash,
+        &mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+        /* UART1 */
+        MX35_PAD_CTS1__UART1_CTS,
+        MX35_PAD_RTS1__UART1_RTS,
+        MX35_PAD_TXD1__UART1_TXD_MUX,
+        MX35_PAD_RXD1__UART1_RXD_MUX,
+        /* UART2 */
+        MX35_PAD_CTS2__UART2_CTS,
+        MX35_PAD_RTS2__UART2_RTS,
+        MX35_PAD_TXD2__UART2_TXD_MUX,
+        MX35_PAD_RXD2__UART2_RXD_MUX,
+        /* FEC */
+        MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+        MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+        MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+        MX35_PAD_FEC_COL__FEC_COL,
+        MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+        MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+        MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+        MX35_PAD_FEC_MDC__FEC_MDC,
+        MX35_PAD_FEC_MDIO__FEC_MDIO,
+        MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+        MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+        MX35_PAD_FEC_CRS__FEC_CRS,
+        MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+        MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+        MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+        MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+        MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+        MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+        /* I2C1 */
+        MX35_PAD_I2C1_CLK__I2C1_SCL,
+        MX35_PAD_I2C1_DAT__I2C1_SDA,
+        /* Display */
+        MX35_PAD_LD0__IPU_DISPB_DAT_0,
+        MX35_PAD_LD1__IPU_DISPB_DAT_1,
+        MX35_PAD_LD2__IPU_DISPB_DAT_2,
+        MX35_PAD_LD3__IPU_DISPB_DAT_3,
+        MX35_PAD_LD4__IPU_DISPB_DAT_4,
+        MX35_PAD_LD5__IPU_DISPB_DAT_5,
+        MX35_PAD_LD6__IPU_DISPB_DAT_6,
+        MX35_PAD_LD7__IPU_DISPB_DAT_7,
+        MX35_PAD_LD8__IPU_DISPB_DAT_8,
+        MX35_PAD_LD9__IPU_DISPB_DAT_9,
+        MX35_PAD_LD10__IPU_DISPB_DAT_10,
+        MX35_PAD_LD11__IPU_DISPB_DAT_11,
+        MX35_PAD_LD12__IPU_DISPB_DAT_12,
+        MX35_PAD_LD13__IPU_DISPB_DAT_13,
+        MX35_PAD_LD14__IPU_DISPB_DAT_14,
+        MX35_PAD_LD15__IPU_DISPB_DAT_15,
+        MX35_PAD_LD16__IPU_DISPB_DAT_16,
+        MX35_PAD_LD17__IPU_DISPB_DAT_17,
+        MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+        MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+        MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+        MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+        MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+        MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+        MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+        MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+        mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+        i2c_register_board_info(0, pcm043_i2c_devices,
+                        ARRAY_SIZE(pcm043_i2c_devices));
+
+        mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+        mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+        mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+        mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+        .init   = pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+        /* Maintainer: Pengutronix */
+        .phys_io        = AIPS1_BASE_ADDR,
+        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mx35_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = mxc_board_init,
+        .timer          = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 5a01e48fd8f1..82b31c4ab11f 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
         .phys_io        = AIPS1_BASE_ADDR,
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
-        .map_io         = mxc_map_io,
+        .map_io         = mx31_map_io,
         .init_irq       = mxc_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &qong_timer,
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3a48f2fb0ca0..6226e64d99a1 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -35,6 +35,11 @@ endif
 obj-$(CONFIG_ARCH_OMAP2)                += clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)                += clock34xx.o
 
+iommu-y                                 += iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3)              += omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU)                += $(iommu-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)         += board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)              += board-h4.o
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
new file mode 100644
index 000000000000..015f22a53ead
--- /dev/null
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -0,0 +1,323 @@
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *              Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION      0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT      3
+#define MMU_SYS_IDLE_FORCE      (0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE       (1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART      (2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK       (3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET       (1 << 1)
+#define MMU_SYS_AUTOIDLE        1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE       1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT   (1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT  (1 << 3)
+#define MMU_IRQ_EMUMISS         (1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT        (1 << 1)
+#define MMU_IRQ_TLBMISS         (1 << 0)
+#define MMU_IRQ_MASK    \
+        (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+         MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT          1
+#define MMU_CNTL_MASK           (7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB        (1 << 3)
+#define MMU_CNTL_TWL_EN         (1 << 2)
+#define MMU_CNTL_MMU_EN         (1 << 1)
+
+#define get_cam_va_mask(pgsz)                           \
+        (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 :    \
+         ((pgsz) == MMU_CAM_PGSZ_1M)  ? 0xfff00000 :    \
+         ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :    \
+         ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+        u32 l, pa;
+        unsigned long timeout;
+
+        if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
+                return -EINVAL;
+
+        pa = virt_to_phys(obj->iopgd);
+        if (!IS_ALIGNED(pa, SZ_16K))
+                return -EINVAL;
+
+        iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+        timeout = jiffies + msecs_to_jiffies(20);
+        do {
+                l = iommu_read_reg(obj, MMU_SYSSTATUS);
+                if (l & MMU_SYS_RESETDONE)
+                        break;
+        } while (time_after(jiffies, timeout));
+
+        if (!(l & MMU_SYS_RESETDONE)) {
+                dev_err(obj->dev, "can't take mmu out of reset\n");
+                return -ENODEV;
+        }
+
+        l = iommu_read_reg(obj, MMU_REVISION);
+        dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+                 (l >> 4) & 0xf, l & 0xf);
+
+        l = iommu_read_reg(obj, MMU_SYSCONFIG);
+        l &= ~MMU_SYS_IDLE_MASK;
+        l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+        iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+        iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+        iommu_write_reg(obj, pa, MMU_TTB);
+
+        l = iommu_read_reg(obj, MMU_CNTL);
+        l &= ~MMU_CNTL_MASK;
+        l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+        iommu_write_reg(obj, l, MMU_CNTL);
+
+        return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+        u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+        l &= ~MMU_CNTL_MASK;
+        iommu_write_reg(obj, l, MMU_CNTL);
+        iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+        dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+        int i;
+        u32 stat, da;
+        const char *err_msg[] = {
+                "tlb miss",
+                "translation fault",
+                "emulation miss",
+                "table walk fault",
+                "multi hit fault",
+        };
+
+        stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+        stat &= MMU_IRQ_MASK;
+        if (!stat)
+                return 0;
+
+        da = iommu_read_reg(obj, MMU_FAULT_AD);
+        *ra = da;
+
+        dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+        for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+                if (stat & (1 << i))
+                        printk("%s ", err_msg[i]);
+        }
+        printk("\n");
+
+        iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+        return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+        cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+        cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+        iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+        iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+        u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+        u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+        return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+        struct cr_regs *cr;
+
+        if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+                dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+                        e->da);
+                return ERR_PTR(-EINVAL);
+        }
+
+        cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+        if (!cr)
+                return ERR_PTR(-ENOMEM);
+
+        cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+        cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+        return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+        return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+        u32 attr;
+
+        attr = e->mixed << 5;
+        attr |= e->endian;
+        attr |= e->elsz >> 3;
+        attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+        return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+        char *p = buf;
+
+        /* FIXME: Need more detail analysis of cam/ram */
+        p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+        return p - buf;
+}
+
+#define pr_reg(name)                                                    \
+        p += sprintf(p, "%20s: %08x\n",                                 \
+                     __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+        char *p = buf;
+
+        pr_reg(REVISION);
+        pr_reg(SYSCONFIG);
+        pr_reg(SYSSTATUS);
+        pr_reg(IRQSTATUS);
+        pr_reg(IRQENABLE);
+        pr_reg(WALKING_ST);
+        pr_reg(CNTL);
+        pr_reg(FAULT_AD);
+        pr_reg(TTB);
+        pr_reg(LOCK);
+        pr_reg(LD_TLB);
+        pr_reg(CAM);
+        pr_reg(RAM);
+        pr_reg(GFLUSH);
+        pr_reg(FLUSH_ENTRY);
+        pr_reg(READ_CAM);
+        pr_reg(READ_RAM);
+        pr_reg(EMU_FAULT_AD);
+
+        return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+        int i;
+        u32 *p = obj->ctx;
+
+        for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+                p[i] = iommu_read_reg(obj, i * sizeof(u32));
+                dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+        }
+
+        BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+        int i;
+        u32 *p = obj->ctx;
+
+        for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+                iommu_write_reg(obj, p[i], i * sizeof(u32));
+                dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+        }
+
+        BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+        e->da           = cr->cam & MMU_CAM_VATAG_MASK;
+        e->pa           = cr->ram & MMU_RAM_PADDR_MASK;
+        e->valid        = cr->cam & MMU_CAM_V;
+        e->pgsz         = cr->cam & MMU_CAM_PGSZ_MASK;
+        e->endian       = cr->ram & MMU_RAM_ENDIAN_MASK;
+        e->elsz         = cr->ram & MMU_RAM_ELSZ_MASK;
+        e->mixed        = cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+        .version        = IOMMU_ARCH_VERSION,
+
+        .enable         = omap2_iommu_enable,
+        .disable        = omap2_iommu_disable,
+        .fault_isr      = omap2_iommu_fault_isr,
+
+        .tlb_read_cr    = omap2_tlb_read_cr,
+        .tlb_load_cr    = omap2_tlb_load_cr,
+
+        .cr_to_e        = omap2_cr_to_e,
+        .cr_to_virt     = omap2_cr_to_virt,
+        .alloc_cr       = omap2_alloc_cr,
+        .cr_valid       = omap2_cr_valid,
+        .dump_cr        = omap2_dump_cr,
+
+        .get_pte_attr   = omap2_get_pte_attr,
+
+        .save_ctx       = omap2_iommu_save_ctx,
+        .restore_ctx    = omap2_iommu_restore_ctx,
+        .dump_ctx       = omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+        return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+        uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
new file mode 100644
index 000000000000..194189c746c2
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -0,0 +1,105 @@
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE 0x480bd400
+#define OMAP3_MMU2_BASE 0x5d000000
+#define OMAP3_MMU1_IRQ  24
+#define OMAP3_MMU2_IRQ  28
+
+
+static unsigned long iommu_base[] __initdata = {
+        OMAP3_MMU1_BASE,
+        OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+        OMAP3_MMU1_IRQ,
+        OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+        {
+                .name = "isp",
+                .nr_tlb_entries = 8,
+                .clk_name = "cam_ick",
+        },
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+        {
+                .name = "iva2",
+                .nr_tlb_entries = 32,
+                .clk_name = "iva2_ck",
+        },
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+        int i, err;
+
+        for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+                struct platform_device *pdev;
+                struct resource res[2];
+
+                pdev = platform_device_alloc("omap-iommu", i);
+                if (!pdev) {
+                        err = -ENOMEM;
+                        goto err_out;
+                }
+
+                memset(res, 0,  sizeof(res));
+                res[0].start = iommu_base[i];
+                res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+                res[0].flags = IORESOURCE_MEM;
+                res[1].start = res[1].end = iommu_irq[i];
+                res[1].flags = IORESOURCE_IRQ;
+
+                err = platform_device_add_resources(pdev, res,
+                                                    ARRAY_SIZE(res));
+                if (err)
+                        goto err_out;
+                err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+                                               sizeof(omap3_iommu_pdata[0]));
+                if (err)
+                        goto err_out;
+                err = platform_device_add(pdev);
+                if (err)
+                        goto err_out;
+                omap3_iommu_pdev[i] = pdev;
+        }
+        return 0;
+
+err_out:
+        while (i--)
+                platform_device_put(omap3_iommu_pdev[i]);
+        return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+        int i;
+
+        for (i = 0; i < NR_IOMMU_DEVICES; i++)
+                platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 9f88dd3be601..0ab75c60f7cf 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn,
         return err;
 }
 
+int ioremap_page(unsigned long virt, unsigned long phys,
+                 const struct mem_type *mtype)
+{
+        return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
 
 void __check_kvm_seq(struct mm_struct *mm)
 {
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e6344ece00ce..70974d75a075 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type)
 {
         return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 }
+EXPORT_SYMBOL(get_mem_type);
 
 /*
  * Adjust the PMD section entries according to the CPU in use.
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 17d0e9906d5f..8986b7412235 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR
 config MXC_PWM
         tristate "Enable PWM driver"
         depends on ARCH_MXC
+        select HAVE_PWM
         help
           Enable support for the i.MX PWM controller(s).
 
+config ARCH_HAS_RNGA
+        bool
+        depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+        bool
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 055406312b69..e3212c8ff421 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 89e95798cc3b..7506d963be4b 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq)
         _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
 }
 
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
 static int gpio_set_irq_type(u32 irq, u32 type)
 {
         u32 gpio = irq_to_gpio(irq);
@@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type)
         int edge;
         void __iomem *reg = port->base;
 
+        port->both_edges &= ~(1 << (gpio & 31));
         switch (type) {
         case IRQ_TYPE_EDGE_RISING:
                 edge = GPIO_INT_RISE_EDGE;
@@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type)
         case IRQ_TYPE_EDGE_FALLING:
                 edge = GPIO_INT_FALL_EDGE;
                 break;
+        case IRQ_TYPE_EDGE_BOTH:
+                val = mxc_gpio_get(&port->chip, gpio & 31);
+                if (val) {
+                        edge = GPIO_INT_LOW_LEV;
+                        pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+                } else {
+                        edge = GPIO_INT_HIGH_LEV;
+                        pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+                }
+                port->both_edges |= 1 << (gpio & 31);
+                break;
         case IRQ_TYPE_LEVEL_LOW:
                 edge = GPIO_INT_LOW_LEV;
                 break;
         case IRQ_TYPE_LEVEL_HIGH:
                 edge = GPIO_INT_HIGH_LEV;
                 break;
-        default:        /* this includes IRQ_TYPE_EDGE_BOTH */
+        default:
                 return -EINVAL;
         }
 
@@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type)
         return 0;
 }
 
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+        void __iomem *reg = port->base;
+        u32 bit, val;
+        int edge;
+
+        reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+        bit = gpio & 0xf;
+        val = __raw_readl(reg);
+        edge = (val >> (bit << 1)) & 3;
+        val &= ~(0x3 << (bit << 1));
+        switch (edge) {
+        case GPIO_INT_HIGH_LEV:
+                edge = GPIO_INT_LOW_LEV;
+                pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+                break;
+        case GPIO_INT_LOW_LEV:
+                edge = GPIO_INT_HIGH_LEV;
+                pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+                break;
+        default:
+                pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+                       gpio, edge);
+                return;
+        }
+        __raw_writel(val | (edge << (bit << 1)), reg);
+}
+
 /* handle n interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
@@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 
         gpio_irq_no = port->virtual_irq_start;
         for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+                u32 gpio = irq_to_gpio(gpio_irq_no);
 
                 if ((irq_stat & 1) == 0)
                         continue;
 
                 BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+                if (port->both_edges & (1 << (gpio & 31)))
+                        mxc_flip_edge(port, gpio);
+
                 irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
                                 &irq_desc[gpio_irq_no]);
         }
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
new file mode 100644
index 000000000000..06701df74c42
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+                (MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
+#endif                          /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
new file mode 100644
index 000000000000..552b55d714d8
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 318c72ada13d..06e6895f7f65 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,7 +114,7 @@
 
 #define MXC_MAX_EXP_IO_LINES    16
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5ad7db..52fbdf2d6f26 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,28 +11,8 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_MAX_EXP_IO_LINES    16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE          SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE        SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE                (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index f8aef1babb75..303fd2434a21 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       (AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 2b6b316d0f51..519bab3eb28b 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,9 +11,54 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS              CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR               CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR                       (DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG                    (CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG             (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG               (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG              (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG          (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG          (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG               (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG          (CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG           (CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG           (CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET          (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A       (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B       (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A      (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B      (MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES    16
+
 #endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba3c8fc..f0a1fa1938a2 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62afd90f..4fcd7499e092 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       (AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index e22ba789546c..15fbdf16abcd 100644
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -1,7 +1,5 @@
 /*
- *  linux/include/asm-arm/imx/timex.h
- *
- *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,9 +16,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
 
-#define CLOCK_TICK_RATE         (16000000)
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
-#endif
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 4ff762dd45cf..04033ec637d2 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index b2f9b72644db..02c3cd004db3 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -14,7 +14,11 @@
 struct platform_device;
 struct clk;
 
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk);
 extern int mx1_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f773148bc20..e6b841b15e36 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -25,6 +25,9 @@
 #ifdef CONFIG_MACH_MX27ADS
 #include <mach/board-mx27ads.h>
 #endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
 #ifdef CONFIG_MACH_PCM038
 #include <mach/board-pcm038.h>
 #endif
@@ -34,6 +37,12 @@
 #ifdef CONFIG_MACH_QONG
 #include <mach/board-qong.h>
 #endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
                 .macro  addruart,rx
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index ea509f1090fb..894d2f87c856 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -35,6 +35,7 @@ struct mxc_gpio_port {
         int irq;
         int virtual_irq_start;
         struct gpio_chip chip;
+        u32 both_edges;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 599217b2e13f..90af4d9bc19e 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -23,7 +23,7 @@
 
 struct imxuart_platform_data {
         int (*init)(struct platform_device *pdev);
-        int (*exit)(struct platform_device *pdev);
+        void (*exit)(struct platform_device *pdev);
         unsigned int flags;
 };
 
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 762a7b0430e2..9f0101157ec1 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,8 +76,8 @@ struct imx_fb_platform_data {
         u_char * fixed_screen_cpu;
         dma_addr_t fixed_screen_dma;
 
-        int (*init)(struct platform_device*);
-        int (*exit)(struct platform_device*);
+        int (*init)(struct platform_device *);
+        void (*exit)(struct platform_device *);
 
         void (*lcd_power)(int);
         void (*backlight_power)(int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 57e927a1fd3a..27f8d1b2bc6b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -114,7 +114,7 @@ enum iomux_gp_func {
  *      - setups the iomux according to the configuration
  *      - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
  * setups mutliple pins
  * convenient way to call the above function with tables
@@ -633,6 +633,40 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30       IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA      IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL      IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA     IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL      IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26      IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27      IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3    IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2      IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1    IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0   IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK      IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD      IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28     IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29     IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4         IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5         IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6         IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7         IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8         IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9         IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10       IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11       IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12       IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13       IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14       IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15       IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC   IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK     IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC   IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0       IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1       IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28         IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
new file mode 100644
index 000000000000..00b0ac1db225
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -0,0 +1,1267 @@
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*                                                                        PAD    MUX   ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1                            IOMUX_PAD(0x328, 0x004, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2                           IOMUX_PAD(0x328, 0x004, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1                             IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO                           IOMUX_PAD(0x328, 0x004, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K                            IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4                               IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1                           IOMUX_PAD(0x32c, 0x008, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2                            IOMUX_PAD(0x32c, 0x008, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3                           IOMUX_PAD(0x32c, 0x008, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO                           IOMUX_PAD(0x32c, 0x008, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5                               IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2                         IOMUX_PAD(0x32c, 0x008, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B                          IOMUX_PAD(0x330, 0x00c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE                     IOMUX_PAD(0x330, 0x00c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6                              IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0                               IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY                          IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE                            IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0                         IOMUX_PAD(0x334, 0x010, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1                               IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO                              IOMUX_PAD(0x338, 0x014, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2                             IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT                     IOMUX_PAD(0x338, 0x014, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1                         IOMUX_PAD(0x338, 0x014, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0                               IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK                    IOMUX_PAD(0x33c, 0x018, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0                               IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK                     IOMUX_PAD(0x340, 0x01c, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B                     IOMUX_PAD(0x344, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B                               IOMUX_PAD(0x348, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO                                 IOMUX_PAD(0x34c, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8                                  IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0                    IOMUX_PAD(0x350, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1                    IOMUX_PAD(0x354, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0                      IOMUX_PAD(0x358, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1                      IOMUX_PAD(0x35c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26              IOMUX_PAD(0x360, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY                               IOMUX_PAD(0x364, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7                                 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0                             IOMUX_PAD(0x368, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1                             IOMUX_PAD(0x36c, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2                             IOMUX_PAD(0x370, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3                             IOMUX_PAD(0x374, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4                             IOMUX_PAD(0x378, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5                             IOMUX_PAD(0x37c, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6                             IOMUX_PAD(0x380, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7                             IOMUX_PAD(0x384, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8                             IOMUX_PAD(0x388, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9                             IOMUX_PAD(0x38c, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10                           IOMUX_PAD(0x390, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10                                 IOMUX_PAD(0x394, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11                           IOMUX_PAD(0x398, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12                           IOMUX_PAD(0x39c, 0x05c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13                           IOMUX_PAD(0x3a0, 0x060, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14                          IOMUX_PAD(0x3a4, 0x064, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15                          IOMUX_PAD(0x3a8, 0x068, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16                              IOMUX_PAD(0x3ac, 0x06c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17                              IOMUX_PAD(0x3b0, 0x070, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18                              IOMUX_PAD(0x3b4, 0x074, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19                              IOMUX_PAD(0x3b8, 0x078, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20                              IOMUX_PAD(0x3bc, 0x07c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21                              IOMUX_PAD(0x3c0, 0x080, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22                              IOMUX_PAD(0x3c4, 0x084, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23                              IOMUX_PAD(0x3c8, 0x088, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24                              IOMUX_PAD(0x3cc, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25                              IOMUX_PAD(0x3d0, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1                           IOMUX_PAD(0x3d4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0                           IOMUX_PAD(0x3d8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0                              IOMUX_PAD(0x3dc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1                              IOMUX_PAD(0x3e0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2                              IOMUX_PAD(0x3e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3                              IOMUX_PAD(0x3e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4                              IOMUX_PAD(0x3ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5                              IOMUX_PAD(0x3f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6                              IOMUX_PAD(0x3f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7                              IOMUX_PAD(0x3f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8                              IOMUX_PAD(0x3fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9                              IOMUX_PAD(0x400, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10                            IOMUX_PAD(0x404, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11                            IOMUX_PAD(0x408, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12                            IOMUX_PAD(0x40c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13                            IOMUX_PAD(0x410, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14                            IOMUX_PAD(0x414, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15                            IOMUX_PAD(0x418, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16                            IOMUX_PAD(0x41c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17                            IOMUX_PAD(0x420, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18                            IOMUX_PAD(0x424, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19                            IOMUX_PAD(0x428, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20                            IOMUX_PAD(0x42c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21                            IOMUX_PAD(0x430, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22                            IOMUX_PAD(0x434, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23                            IOMUX_PAD(0x438, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24                            IOMUX_PAD(0x43c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25                            IOMUX_PAD(0x440, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26                            IOMUX_PAD(0x444, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27                            IOMUX_PAD(0x448, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28                            IOMUX_PAD(0x44c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29                            IOMUX_PAD(0x450, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30                            IOMUX_PAD(0x454, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31                            IOMUX_PAD(0x458, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0                           IOMUX_PAD(0x45c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1                           IOMUX_PAD(0x460, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2                           IOMUX_PAD(0x464, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3                           IOMUX_PAD(0x468, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B                             IOMUX_PAD(0x46c, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B                             IOMUX_PAD(0x470, 0x098, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE                                 IOMUX_PAD(0x474, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0                               IOMUX_PAD(0x478, 0x0a0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1                               IOMUX_PAD(0x47c, 0x0a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3                             IOMUX_PAD(0x47c, 0x0a4, 3, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2                               IOMUX_PAD(0x480, 0x0a8, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3                               IOMUX_PAD(0x484, 0x0ac, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4                               IOMUX_PAD(0x488, 0x0b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B                               IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1                             IOMUX_PAD(0x488, 0x0b0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20                                  IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5                               IOMUX_PAD(0x48c, 0x0b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2                                 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2                                 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2                             IOMUX_PAD(0x48c, 0x0b4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21                                  IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0                          IOMUX_PAD(0x490, 0x0b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22                               IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB                               IOMUX_PAD(0x494, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA                               IOMUX_PAD(0x498, 0x0bc, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK                             IOMUX_PAD(0x49c, 0x0c0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW                                 IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS                              IOMUX_PAD(0x4a4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS                              IOMUX_PAD(0x4a8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE                            IOMUX_PAD(0x4ac, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0                       IOMUX_PAD(0x4b0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1                       IOMUX_PAD(0x4b4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK                          IOMUX_PAD(0x4b8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0                         IOMUX_PAD(0x4bc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1                         IOMUX_PAD(0x4c0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2                         IOMUX_PAD(0x4c4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3                         IOMUX_PAD(0x4c8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B                         IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3                   IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC                     IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18                               IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0                     IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B                         IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR                      IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK                         IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19                               IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1                     IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE                           IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP                       IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0                           IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20                                IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2                      IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE                           IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT                       IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS                        IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21                                IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3                      IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B                         IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7                   IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR                           IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22                               IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL                       IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB                             IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD                             IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23                                 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK                         IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15                              IOMUX_PAD(0x4e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14                              IOMUX_PAD(0x4e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13                              IOMUX_PAD(0x4ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12                              IOMUX_PAD(0x4f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11                              IOMUX_PAD(0x4f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10                              IOMUX_PAD(0x4f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9                                IOMUX_PAD(0x4fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8                                IOMUX_PAD(0x500, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7                                IOMUX_PAD(0x504, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6                                IOMUX_PAD(0x508, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5                                IOMUX_PAD(0x50c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4                                IOMUX_PAD(0x510, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3                                IOMUX_PAD(0x514, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2                                IOMUX_PAD(0x518, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1                                IOMUX_PAD(0x51c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0                                IOMUX_PAD(0x520, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8                            IOMUX_PAD(0x524, 0x0e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0                              IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20                               IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13                  IOMUX_PAD(0x524, 0x0e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9                            IOMUX_PAD(0x528, 0x0e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1                              IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21                               IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14                  IOMUX_PAD(0x528, 0x0e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10                          IOMUX_PAD(0x52c, 0x0e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2                             IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22                              IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15                 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11                          IOMUX_PAD(0x530, 0x0ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3                             IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23                              IOMUX_PAD(0x530, 0x0ec, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12                          IOMUX_PAD(0x534, 0x0f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0                             IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24                              IOMUX_PAD(0x534, 0x0f0, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13                          IOMUX_PAD(0x538, 0x0f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1                             IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25                              IOMUX_PAD(0x538, 0x0f4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14                          IOMUX_PAD(0x53c, 0x0f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2                             IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26                              IOMUX_PAD(0x53c, 0x0f8, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15                          IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3                             IOMUX_PAD(0x540, 0x0fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27                              IOMUX_PAD(0x540, 0x0fc, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK                         IOMUX_PAD(0x544, 0x100, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28                             IOMUX_PAD(0x544, 0x100, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC                       IOMUX_PAD(0x548, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29                            IOMUX_PAD(0x548, 0x104, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC                       IOMUX_PAD(0x54c, 0x108, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30                            IOMUX_PAD(0x54c, 0x108, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK                     IOMUX_PAD(0x550, 0x10c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31                           IOMUX_PAD(0x550, 0x10c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL                             IOMUX_PAD(0x554, 0x110, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24                             IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK                      IOMUX_PAD(0x554, 0x110, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA                             IOMUX_PAD(0x558, 0x114, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25                             IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL                             IOMUX_PAD(0x55c, 0x118, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN                           IOMUX_PAD(0x55c, 0x118, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR                    IOMUX_PAD(0x55c, 0x118, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26                             IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2              IOMUX_PAD(0x55c, 0x118, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA                             IOMUX_PAD(0x560, 0x11c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN                           IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC                     IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27                             IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3              IOMUX_PAD(0x560, 0x11c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD                         IOMUX_PAD(0x564, 0x120, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28                                IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0                IOMUX_PAD(0x564, 0x120, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD                         IOMUX_PAD(0x568, 0x124, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29                                IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1                IOMUX_PAD(0x568, 0x124, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC                          IOMUX_PAD(0x56c, 0x128, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30                                 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2                 IOMUX_PAD(0x56c, 0x128, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS                       IOMUX_PAD(0x570, 0x12c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31                               IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3               IOMUX_PAD(0x570, 0x12c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD                         IOMUX_PAD(0x574, 0x130, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1                        IOMUX_PAD(0x574, 0x130, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI                              IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0                                 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4                IOMUX_PAD(0x574, 0x130, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD                         IOMUX_PAD(0x578, 0x134, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1                         IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO                              IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1                                 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5                IOMUX_PAD(0x578, 0x134, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC                          IOMUX_PAD(0x57c, 0x138, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK                       IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK                               IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2                                  IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6                 IOMUX_PAD(0x57c, 0x138, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS                       IOMUX_PAD(0x580, 0x13c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY                              IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3                                IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7               IOMUX_PAD(0x580, 0x13c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR                                IOMUX_PAD(0x584, 0x140, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4                                  IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10                    IOMUX_PAD(0x584, 0x140, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR                                  IOMUX_PAD(0x588, 0x144, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5                                   IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11                     IOMUX_PAD(0x588, 0x144, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR                                IOMUX_PAD(0x58c, 0x148, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS                         IOMUX_PAD(0x58c, 0x148, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0                                IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE                         IOMUX_PAD(0x58c, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6                                  IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12                    IOMUX_PAD(0x58c, 0x148, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT                                IOMUX_PAD(0x590, 0x14c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7                                  IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0                              IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2                                IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST                                  IOMUX_PAD(0x594, 0x150, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8                                   IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1                               IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3                                 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT                                IOMUX_PAD(0x598, 0x154, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC                          IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9                                  IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2                              IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3                                IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0                          IOMUX_PAD(0x59c, 0x158, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC                       IOMUX_PAD(0x59c, 0x158, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2                             IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN                            IOMUX_PAD(0x59c, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR                             IOMUX_PAD(0x59c, 0x158, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10                              IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0              IOMUX_PAD(0x59c, 0x158, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1                          IOMUX_PAD(0x5a0, 0x15c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS                      IOMUX_PAD(0x5a0, 0x15c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3                             IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN                            IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR                             IOMUX_PAD(0x5a0, 0x15c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11                              IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3                           IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0                             IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2                          IOMUX_PAD(0x5a4, 0x160, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL                              IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1                         IOMUX_PAD(0x5a4, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12                              IOMUX_PAD(0x5a4, 0x160, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4                           IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1                             IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3                          IOMUX_PAD(0x5a8, 0x164, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA                              IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2                         IOMUX_PAD(0x5a8, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13                              IOMUX_PAD(0x5a8, 0x164, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5                           IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0                             IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1                                  IOMUX_PAD(0x5ac, 0x168, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY                              IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2                                 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3                             IOMUX_PAD(0x5ac, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI                                  IOMUX_PAD(0x5ac, 0x168, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14                                  IOMUX_PAD(0x5ac, 0x168, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6                               IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1                                 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0                                  IOMUX_PAD(0x5b0, 0x16c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK                        IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3                                 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B                               IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD                                 IOMUX_PAD(0x5b0, 0x16c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15                                  IOMUX_PAD(0x5b0, 0x16c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7                               IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2                                 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI                         IOMUX_PAD(0x5b4, 0x170, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16                           IOMUX_PAD(0x5b4, 0x170, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2                IOMUX_PAD(0x5b4, 0x170, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO                         IOMUX_PAD(0x5b8, 0x174, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17                           IOMUX_PAD(0x5b8, 0x174, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3                IOMUX_PAD(0x5b8, 0x174, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0                           IOMUX_PAD(0x5bc, 0x178, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE                          IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3                           IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18                            IOMUX_PAD(0x5bc, 0x178, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4                 IOMUX_PAD(0x5bc, 0x178, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1                           IOMUX_PAD(0x5c0, 0x17c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO                            IOMUX_PAD(0x5c0, 0x17c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K                          IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19                            IOMUX_PAD(0x5c0, 0x17c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29                        IOMUX_PAD(0x5c0, 0x17c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5                 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK                         IOMUX_PAD(0x5c4, 0x180, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4                            IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30                       IOMUX_PAD(0x5c4, 0x180, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1           IOMUX_PAD(0x5c4, 0x180, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY                       IOMUX_PAD(0x5c8, 0x184, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5                         IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31                    IOMUX_PAD(0x5c8, 0x184, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2        IOMUX_PAD(0x5c8, 0x184, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX                            IOMUX_PAD(0x5cc, 0x188, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI                               IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4                                IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6                                  IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16                    IOMUX_PAD(0x5cc, 0x188, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX                            IOMUX_PAD(0x5d0, 0x18c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO                               IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5                                IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7                                  IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17                    IOMUX_PAD(0x5d0, 0x18c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS                                IOMUX_PAD(0x5d4, 0x190, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK                               IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL                                 IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0                              IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6                                IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8                                  IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1                            IOMUX_PAD(0x5d4, 0x190, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18                    IOMUX_PAD(0x5d4, 0x190, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS                                IOMUX_PAD(0x5d8, 0x194, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY                                IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA                                 IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1                              IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7                                IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9                                  IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2                            IOMUX_PAD(0x5d8, 0x194, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19                    IOMUX_PAD(0x5d8, 0x194, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX                            IOMUX_PAD(0x5dc, 0x198, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4                                IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10                                 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX                            IOMUX_PAD(0x5e0, 0x19c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK                       IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5                                IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11                                 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS                                IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1                          IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN                               IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2                              IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6                                IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12                                 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC                          IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX                            IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS                                IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1                         IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN                               IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3                              IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7                                IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13                                 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS                         IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX                            IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK                          IOMUX_PAD(0x5ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK                                   IOMUX_PAD(0x5f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS                                   IOMUX_PAD(0x5f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI                                   IOMUX_PAD(0x5f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO                                   IOMUX_PAD(0x5fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB                               IOMUX_PAD(0x600, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B                                 IOMUX_PAD(0x604, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD                               IOMUX_PAD(0x608, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR                 IOMUX_PAD(0x60c, 0x1a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR                  IOMUX_PAD(0x60c, 0x1a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14                           IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC                   IOMUX_PAD(0x610, 0x1ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC                    IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15                            IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0                           IOMUX_PAD(0x614, 0x1b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0                                   IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0                      IOMUX_PAD(0x614, 0x1b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1                           IOMUX_PAD(0x618, 0x1b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1                                   IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1                      IOMUX_PAD(0x618, 0x1b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2                           IOMUX_PAD(0x61c, 0x1b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2                                   IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2                      IOMUX_PAD(0x61c, 0x1b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3                           IOMUX_PAD(0x620, 0x1bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3                                   IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3                      IOMUX_PAD(0x620, 0x1bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4                           IOMUX_PAD(0x624, 0x1c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4                                   IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4                      IOMUX_PAD(0x624, 0x1c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5                           IOMUX_PAD(0x628, 0x1c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5                                   IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5                      IOMUX_PAD(0x628, 0x1c4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6                           IOMUX_PAD(0x62c, 0x1c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6                                   IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6                      IOMUX_PAD(0x62c, 0x1c8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7                           IOMUX_PAD(0x630, 0x1cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7                                   IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7                      IOMUX_PAD(0x630, 0x1cc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8                           IOMUX_PAD(0x634, 0x1d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8                                   IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8                      IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9                           IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9                                   IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9                      IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10                         IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10                                 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10                    IOMUX_PAD(0x63c, 0x1d8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11                         IOMUX_PAD(0x640, 0x1dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11                                 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11                    IOMUX_PAD(0x640, 0x1dc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4                       IOMUX_PAD(0x640, 0x1dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12                         IOMUX_PAD(0x644, 0x1e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12                                 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12                    IOMUX_PAD(0x644, 0x1e0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5                       IOMUX_PAD(0x644, 0x1e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13                         IOMUX_PAD(0x648, 0x1e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13                                 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13                    IOMUX_PAD(0x648, 0x1e4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6                       IOMUX_PAD(0x648, 0x1e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14                         IOMUX_PAD(0x64c, 0x1e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14                                 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0          IOMUX_PAD(0x64c, 0x1e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7                       IOMUX_PAD(0x64c, 0x1e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15                         IOMUX_PAD(0x650, 0x1ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15                                 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1          IOMUX_PAD(0x650, 0x1ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8                       IOMUX_PAD(0x650, 0x1ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16                         IOMUX_PAD(0x654, 0x1f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC                      IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16                                 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2          IOMUX_PAD(0x654, 0x1f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9                       IOMUX_PAD(0x654, 0x1f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17                         IOMUX_PAD(0x658, 0x1f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2                            IOMUX_PAD(0x658, 0x1f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17                                 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3          IOMUX_PAD(0x658, 0x1f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10                      IOMUX_PAD(0x658, 0x1f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18                         IOMUX_PAD(0x65c, 0x1f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC                       IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC                      IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD                               IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3                    IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24                                 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4          IOMUX_PAD(0x65c, 0x1f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11                      IOMUX_PAD(0x65c, 0x1f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19                         IOMUX_PAD(0x660, 0x1fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK                           IOMUX_PAD(0x660, 0x1fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1                            IOMUX_PAD(0x660, 0x1fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK                               IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR                       IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25                                 IOMUX_PAD(0x660, 0x1fc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5          IOMUX_PAD(0x660, 0x1fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12                      IOMUX_PAD(0x660, 0x1fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20                         IOMUX_PAD(0x664, 0x200, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0                            IOMUX_PAD(0x664, 0x200, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK                         IOMUX_PAD(0x664, 0x200, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0                              IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26                                 IOMUX_PAD(0x664, 0x200, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3            IOMUX_PAD(0x664, 0x200, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13                      IOMUX_PAD(0x664, 0x200, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21                         IOMUX_PAD(0x668, 0x204, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS                         IOMUX_PAD(0x668, 0x204, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS                         IOMUX_PAD(0x668, 0x204, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1                              IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP                       IOMUX_PAD(0x668, 0x204, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27                                 IOMUX_PAD(0x668, 0x204, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL             IOMUX_PAD(0x668, 0x204, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14                      IOMUX_PAD(0x668, 0x204, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22                         IOMUX_PAD(0x66c, 0x208, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR                             IOMUX_PAD(0x66c, 0x208, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I                         IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2                              IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT                       IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28                                 IOMUX_PAD(0x66c, 0x208, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR                     IOMUX_PAD(0x66c, 0x208, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL                         IOMUX_PAD(0x66c, 0x208, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23                         IOMUX_PAD(0x670, 0x20c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD                             IOMUX_PAD(0x670, 0x20c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO                        IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3                              IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7                    IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29                                 IOMUX_PAD(0x670, 0x20c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS                 IOMUX_PAD(0x670, 0x20c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK                         IOMUX_PAD(0x670, 0x20c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC                   IOMUX_PAD(0x674, 0x210, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO                    IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30                             IOMUX_PAD(0x674, 0x210, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE            IOMUX_PAD(0x674, 0x210, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15                  IOMUX_PAD(0x674, 0x210, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK                   IOMUX_PAD(0x678, 0x214, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK                   IOMUX_PAD(0x678, 0x214, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31                           IOMUX_PAD(0x678, 0x214, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0      IOMUX_PAD(0x678, 0x214, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16                IOMUX_PAD(0x678, 0x214, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY                     IOMUX_PAD(0x67c, 0x218, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O                      IOMUX_PAD(0x67c, 0x218, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0                               IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1         IOMUX_PAD(0x67c, 0x218, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17                   IOMUX_PAD(0x67c, 0x218, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR                      IOMUX_PAD(0x680, 0x21c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1                              IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2        IOMUX_PAD(0x680, 0x21c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18                  IOMUX_PAD(0x680, 0x21c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC                   IOMUX_PAD(0x684, 0x220, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1                        IOMUX_PAD(0x684, 0x220, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2                              IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD                     IOMUX_PAD(0x684, 0x220, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19                  IOMUX_PAD(0x684, 0x220, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV                       IOMUX_PAD(0x688, 0x224, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS                       IOMUX_PAD(0x688, 0x224, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3                                IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB                     IOMUX_PAD(0x688, 0x224, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20                    IOMUX_PAD(0x688, 0x224, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS                       IOMUX_PAD(0x68c, 0x228, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2                          IOMUX_PAD(0x68c, 0x228, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4                                IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0                IOMUX_PAD(0x68c, 0x228, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21                    IOMUX_PAD(0x68c, 0x228, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL                       IOMUX_PAD(0x690, 0x22c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC                    IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5                                IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1                IOMUX_PAD(0x690, 0x22c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22                    IOMUX_PAD(0x690, 0x22c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD                            IOMUX_PAD(0x694, 0x230, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK                             IOMUX_PAD(0x694, 0x230, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC                    IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4                 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6                               IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL                      IOMUX_PAD(0x694, 0x230, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK                            IOMUX_PAD(0x698, 0x234, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS                               IOMUX_PAD(0x698, 0x234, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK                        IOMUX_PAD(0x698, 0x234, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5                 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7                               IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK                      IOMUX_PAD(0x698, 0x234, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0                         IOMUX_PAD(0x69c, 0x238, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0                         IOMUX_PAD(0x69c, 0x238, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0                       IOMUX_PAD(0x69c, 0x238, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6               IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8                             IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23                 IOMUX_PAD(0x69c, 0x238, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1                         IOMUX_PAD(0x6a0, 0x23c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1                         IOMUX_PAD(0x6a0, 0x23c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS                    IOMUX_PAD(0x6a0, 0x23c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0               IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9                             IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24                 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2                         IOMUX_PAD(0x6a4, 0x240, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2                         IOMUX_PAD(0x6a4, 0x240, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR                        IOMUX_PAD(0x6a4, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1               IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10                            IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25                 IOMUX_PAD(0x6a4, 0x240, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3                         IOMUX_PAD(0x6a8, 0x244, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3                         IOMUX_PAD(0x6a8, 0x244, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD                        IOMUX_PAD(0x6a8, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2               IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11                            IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26                 IOMUX_PAD(0x6a8, 0x244, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD                            IOMUX_PAD(0x6ac, 0x248, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL                              IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4                           IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2                           IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4                  IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0                               IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1                      IOMUX_PAD(0x6ac, 0x248, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC                   IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK                            IOMUX_PAD(0x6b0, 0x24c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA                              IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5                           IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3                           IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5                  IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1                               IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1                       IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2                         IOMUX_PAD(0x6b0, 0x24c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0                         IOMUX_PAD(0x6b4, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX                       IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6                         IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4                         IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6                IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2                             IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK                  IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1                         IOMUX_PAD(0x6b8, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX                       IOMUX_PAD(0x6b8, 0x254, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7                         IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5                         IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0                IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3                             IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2                         IOMUX_PAD(0x6bc, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS                           IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN                          IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6                         IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1                IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4                             IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3                         IOMUX_PAD(0x6c0, 0x25c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS                           IOMUX_PAD(0x6c0, 0x25c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN                          IOMUX_PAD(0x6c0, 0x25c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7                         IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2                IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5                             IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0                               IOMUX_PAD(0x6c4, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3                             IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1                         IOMUX_PAD(0x6c4, 0x260, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6                               IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0                           IOMUX_PAD(0x6c4, 0x260, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0             IOMUX_PAD(0x6c4, 0x260, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1                               IOMUX_PAD(0x6c8, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2                         IOMUX_PAD(0x6c8, 0x264, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0                             IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7                               IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1                           IOMUX_PAD(0x6c8, 0x264, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1             IOMUX_PAD(0x6c8, 0x264, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR                             IOMUX_PAD(0x6cc, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0                          IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR                   IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0                        IOMUX_PAD(0x6cc, 0x268, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1                            IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8                              IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2                          IOMUX_PAD(0x6cc, 0x268, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2            IOMUX_PAD(0x6cc, 0x268, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW                             IOMUX_PAD(0x6d0, 0x26c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1                          IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP                   IOMUX_PAD(0x6d0, 0x26c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1                        IOMUX_PAD(0x6d0, 0x26c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI                           IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9                              IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3                          IOMUX_PAD(0x6d0, 0x26c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3            IOMUX_PAD(0x6d0, 0x26c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK                           IOMUX_PAD(0x6d4, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2                         IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT                  IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO                          IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10                            IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4                         IOMUX_PAD(0x6d4, 0x270, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0           IOMUX_PAD(0x6d4, 0x270, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B                       IOMUX_PAD(0x6d8, 0x274, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3                       IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0             IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O                  IOMUX_PAD(0x6d8, 0x274, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY                         IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11                          IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5                       IOMUX_PAD(0x6d8, 0x274, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1         IOMUX_PAD(0x6d8, 0x274, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY                           IOMUX_PAD(0x6dc, 0x278, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4                         IOMUX_PAD(0x6dc, 0x278, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1               IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO                   IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4                         IOMUX_PAD(0x6dc, 0x278, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12                            IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6                         IOMUX_PAD(0x6dc, 0x278, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2           IOMUX_PAD(0x6dc, 0x278, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0                          IOMUX_PAD(0x6e0, 0x27c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5                         IOMUX_PAD(0x6e0, 0x27c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2               IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC                 IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5                         IOMUX_PAD(0x6e0, 0x27c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13                            IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7                         IOMUX_PAD(0x6e0, 0x27c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3           IOMUX_PAD(0x6e0, 0x27c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1                          IOMUX_PAD(0x6e4, 0x280, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6                         IOMUX_PAD(0x6e4, 0x280, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3               IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK                    IOMUX_PAD(0x6e4, 0x280, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6                         IOMUX_PAD(0x6e4, 0x280, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14                            IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8                         IOMUX_PAD(0x6e4, 0x280, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27                 IOMUX_PAD(0x6e4, 0x280, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2                          IOMUX_PAD(0x6e8, 0x284, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7                         IOMUX_PAD(0x6e8, 0x284, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4               IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS                    IOMUX_PAD(0x6e8, 0x284, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7                         IOMUX_PAD(0x6e8, 0x284, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15                            IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9                         IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28                 IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3                          IOMUX_PAD(0x6e8, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK                          IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5               IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK                          IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16                            IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10                        IOMUX_PAD(0x6e8, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29                 IOMUX_PAD(0x6e8, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4                          IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD                          IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6               IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17                            IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11                        IOMUX_PAD(0x6f0, 0x28c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30                 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5                          IOMUX_PAD(0x6f4, 0x290, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7               IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18                            IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12                        IOMUX_PAD(0x6f4, 0x290, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31                 IOMUX_PAD(0x6f4, 0x290, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6                          IOMUX_PAD(0x6f8, 0x294, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN                          IOMUX_PAD(0x6f8, 0x294, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR                           IOMUX_PAD(0x6f8, 0x294, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD                     IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19                            IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13                        IOMUX_PAD(0x6f8, 0x294, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7                          IOMUX_PAD(0x6fc, 0x298, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN                          IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR                           IOMUX_PAD(0x6fc, 0x298, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD                     IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20                            IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14                        IOMUX_PAD(0x6fc, 0x298, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8                          IOMUX_PAD(0x700, 0x29c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS                           IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI                            IOMUX_PAD(0x700, 0x29c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC                     IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21                            IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15                        IOMUX_PAD(0x700, 0x29c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9                          IOMUX_PAD(0x704, 0x2a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS                           IOMUX_PAD(0x704, 0x2a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD                           IOMUX_PAD(0x704, 0x2a0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS                    IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22                            IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16                        IOMUX_PAD(0x704, 0x2a0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10                        IOMUX_PAD(0x708, 0x2a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX                      IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC                    IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23                           IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17                       IOMUX_PAD(0x708, 0x2a4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11                        IOMUX_PAD(0x70c, 0x2a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX                      IOMUX_PAD(0x70c, 0x2a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS                   IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24                           IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18                       IOMUX_PAD(0x70c, 0x2a8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12                        IOMUX_PAD(0x710, 0x2ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL                           IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25                           IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19                       IOMUX_PAD(0x710, 0x2ac, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13                        IOMUX_PAD(0x714, 0x2b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA                           IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26                           IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20                       IOMUX_PAD(0x714, 0x2b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14                        IOMUX_PAD(0x718, 0x2b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0                        IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0                          IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27                           IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21                       IOMUX_PAD(0x718, 0x2b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15                        IOMUX_PAD(0x71c, 0x2b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1                        IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1                          IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28                           IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22                       IOMUX_PAD(0x71c, 0x2b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ                           IOMUX_PAD(0x720, 0x2bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2                         IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2                           IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29                            IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23                        IOMUX_PAD(0x720, 0x2bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN                     IOMUX_PAD(0x724, 0x2c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3                       IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3                         IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30                          IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24                      IOMUX_PAD(0x724, 0x2c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ                           IOMUX_PAD(0x728, 0x2c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4                         IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0                           IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31                            IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25                        IOMUX_PAD(0x728, 0x2c4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4                  IOMUX_PAD(0x728, 0x2c4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0                              IOMUX_PAD(0x72c, 0x2c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5                           IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1                             IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0                               IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26                          IOMUX_PAD(0x72c, 0x2c8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5                    IOMUX_PAD(0x72c, 0x2c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1                              IOMUX_PAD(0x730, 0x2cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6                           IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2                             IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1                               IOMUX_PAD(0x730, 0x2cc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27                          IOMUX_PAD(0x730, 0x2cc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6                    IOMUX_PAD(0x730, 0x2cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2                              IOMUX_PAD(0x734, 0x2d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7                           IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3                             IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2                               IOMUX_PAD(0x734, 0x2d0, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28                          IOMUX_PAD(0x734, 0x2d0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7                    IOMUX_PAD(0x734, 0x2d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK                            IOMUX_PAD(0x738, 0x2d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3                               IOMUX_PAD(0x738, 0x2d4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT                            IOMUX_PAD(0x73c, 0x2d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4                               IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG                            IOMUX_PAD(0x740, 0x2dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5                               IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK                         IOMUX_PAD(0x744, 0x2e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4                        IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX                      IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR                  IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI                         IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6                            IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC                IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0               IOMUX_PAD(0x744, 0x2e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK                         IOMUX_PAD(0x748, 0x2e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5                        IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX                      IOMUX_PAD(0x748, 0x2e4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP                  IOMUX_PAD(0x748, 0x2e4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO                         IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7                            IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I                   IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1               IOMUX_PAD(0x748, 0x2e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV                           IOMUX_PAD(0x74c, 0x2e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6                         IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS                           IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT                   IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK                          IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8                             IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK                    IOMUX_PAD(0x74c, 0x2e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2                IOMUX_PAD(0x74c, 0x2e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL                               IOMUX_PAD(0x750, 0x2ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7                           IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS                             IOMUX_PAD(0x750, 0x2ec, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0                  IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY                             IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9                               IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS                      IOMUX_PAD(0x750, 0x2ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3                  IOMUX_PAD(0x750, 0x2ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0                        IOMUX_PAD(0x754, 0x2f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO                           IOMUX_PAD(0x754, 0x2f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR                          IOMUX_PAD(0x754, 0x2f0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1               IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0                          IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10                           IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1                      IOMUX_PAD(0x754, 0x2f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4               IOMUX_PAD(0x754, 0x2f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0                        IOMUX_PAD(0x758, 0x2f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1                   IOMUX_PAD(0x758, 0x2f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR                          IOMUX_PAD(0x758, 0x2f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2               IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1                          IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11                           IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0                      IOMUX_PAD(0x758, 0x2f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5               IOMUX_PAD(0x758, 0x2f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN                           IOMUX_PAD(0x75c, 0x2f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1                     IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI                            IOMUX_PAD(0x75c, 0x2f8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3                IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12                            IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS                    IOMUX_PAD(0x75c, 0x2f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6                IOMUX_PAD(0x75c, 0x2f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC                               IOMUX_PAD(0x760, 0x2fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN                            IOMUX_PAD(0x760, 0x2fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD                             IOMUX_PAD(0x760, 0x2fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4                  IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13                              IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR                          IOMUX_PAD(0x760, 0x2fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7                  IOMUX_PAD(0x760, 0x2fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO                             IOMUX_PAD(0x764, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN                           IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5                 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14                             IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD                         IOMUX_PAD(0x764, 0x300, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8                 IOMUX_PAD(0x764, 0x300, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR                         IOMUX_PAD(0x768, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE                         IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK                 IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6               IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15                           IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC                 IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9               IOMUX_PAD(0x768, 0x304, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR                         IOMUX_PAD(0x76c, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0                        IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7               IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4                          IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16                           IOMUX_PAD(0x76c, 0x308, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO                  IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS                               IOMUX_PAD(0x770, 0x30c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1                           IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR                     IOMUX_PAD(0x770, 0x30c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5                             IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17                              IOMUX_PAD(0x770, 0x30c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE                      IOMUX_PAD(0x770, 0x30c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1                        IOMUX_PAD(0x774, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2                        IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC                    IOMUX_PAD(0x774, 0x310, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC                   IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6                          IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18                           IOMUX_PAD(0x774, 0x310, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0                      IOMUX_PAD(0x774, 0x310, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1                        IOMUX_PAD(0x778, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3                        IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS                   IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7                          IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19                           IOMUX_PAD(0x778, 0x314, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1                      IOMUX_PAD(0x778, 0x314, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2                        IOMUX_PAD(0x77c, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4                        IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD                    IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4                          IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20                           IOMUX_PAD(0x77c, 0x318, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2                        IOMUX_PAD(0x780, 0x31c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5                        IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD                    IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5                          IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21                           IOMUX_PAD(0x780, 0x31c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3                        IOMUX_PAD(0x784, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6                        IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC                    IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6                          IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22                           IOMUX_PAD(0x784, 0x320, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3                        IOMUX_PAD(0x788, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7                        IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS                   IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7                          IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23                           IOMUX_PAD(0x788, 0x324, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK                     IOMUX_PAD(0x78c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE                       IOMUX_PAD(0x790, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
new file mode 100644
index 000000000000..7cd84547658f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                      <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ *      build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+        unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+        unsigned mux_mode:8;
+        unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define NO_PAD_CTRL     (1 << 16)
+        unsigned pad_ctrl:17;
+        unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+        unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+                _select_input, _pad_ctrl)                               \
+                {                                                       \
+                        .mux_ctrl_ofs     = _mux_ctrl_ofs,              \
+                        .mux_mode         = _mux_mode,                  \
+                        .pad_ctrl_ofs     = _pad_ctrl_ofs,              \
+                        .pad_ctrl         = _pad_ctrl,                  \
+                        .select_input_ofs = _select_input_ofs,          \
+                        .select_input     = _select_input,              \
+                }
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V     0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V     1
+
+#define PAD_CTL_NO_HYSTERESIS           0
+#define PAD_CTL_HYSTERESIS              1
+
+#define PAD_CTL_PULL_DISABLED           0x0
+#define PAD_CTL_PULL_KEEPER             0xa
+#define PAD_CTL_PULL_DOWN_100K          0xc
+#define PAD_CTL_PULL_UP_47K             0xd
+#define PAD_CTL_PULL_UP_100K            0xe
+#define PAD_CTL_PULL_UP_22K             0xf
+
+#define PAD_CTL_OUTPUT_CMOS             0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN       1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM     0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH     1
+#define PAD_CTL_DRIVE_STRENGTH_MAX      2
+
+#define PAD_CTL_SLEW_RATE_SLOW          0
+#define PAD_CTL_SLEW_RATE_FAST          1
+
+/*
+ * setups a single pad:
+ *      - reserves the pad so that it is not claimed by another driver
+ *      - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ *      - make it available for a future use by another driver
+ *      - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index eca37d09f3f8..6065e00176ed 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -32,4 +32,12 @@
 #define CONSISTENT_DMA_SIZE SZ_4M
 #endif /* CONFIG_MX1_VIDEO */
 
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b92e02324d8e..1000bf330bcd 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,7 +179,7 @@
 #define DMA_REQ_UART1_T         30
 #define DMA_REQ_UART1_R         31
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       IO_ADDRESS(UART1_BASE_ADDR)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 3878c6085d5c..b559a4bb5769 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -48,6 +48,9 @@
 #define CS4_SIZE                SZ_32M
 
 #define CS5_BASE_ADDR           0xB6000000
+#define CS5_BASE_ADDR_VIRT      0xF6000000
+#define CS5_SIZE                SZ_32M
+
 #define PCMCIA_MEM_BASE_ADDR    0xBC000000
 
 /*
@@ -191,6 +194,9 @@
 #define CS4_IO_ADDRESS(x)  \
         (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
 
+#define CS5_IO_ADDRESS(x)  \
+        (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
 #define X_MEMC_IO_ADDRESS(x)  \
         (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
deleted file mode 100644
index 6c19a134744b..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE              IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT         TIM1_INT
-
-#define TCTL_VAL                TCTL_CLK_PCLK1
-#define TCTL_IRQEN              (1<<4)
-#define TCTL_FRR                (1<<8)
-#define TCTL_CLK_PCLK1          (1<<1)
-#define TCTL_CLK_PCLK1_4        (2<<1)
-#define TCTL_CLK_TIN            (3<<1)
-#define TCTL_CLK_32             (4<<1)
-
-#define MXC_TCTL   0x00
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT              (1<<1)
-#define TSTAT_COMP              (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-        unsigned int tmp;
-
-        tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-        __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-        __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-                                TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-        __raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE              IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT         MXC_INT_GPT1
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL                TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1          (1<<1)
-#define TCTL_CLK_PCLK1_4        (2<<1)
-#define TCTL_IRQEN              (1<<4)
-#define TCTL_FRR                (1<<8)
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT              (1<<1)
-#define TSTAT_COMP              (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-        unsigned int tmp;
-
-        tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-        __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-        __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-                                TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-        __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE              IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT         MXC_INT_GPT
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL                (TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG            (1<<6)
-#define TCTL_FRR                (1<<9)
-#define TCTL_WAITEN             (1<<3)
-
-#define MXC_TPRER  0x04
-#define MXC_TSTAT  0x08
-#define TSTAT_OF1               (1<<0)
-#define TSTAT_OF2               (1<<1)
-#define TSTAT_OF3               (1<<2)
-#define TSTAT_IF1               (1<<3)
-#define TSTAT_IF2               (1<<4)
-#define TSTAT_ROV               (1<<5)
-#define MXC_IR     0x0c
-#define MXC_TCMP   0x10
-#define MXC_TCMP2  0x14
-#define MXC_TCMP3  0x18
-#define MXC_TCR    0x1c
-#define MXC_TCN    0x24
-
-static inline void gpt_irq_disable(void)
-{
-        __raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
-        __raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
-        __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR                (1<<15)
-#define TCTL_CC                 (1<<10)
-#define TCTL_OM                 (1<<9)
-#define TCTL_CAP_RIS            (1<<6)
-#define TCTL_CAP_FAL            (2<<6)
-#define TCTL_CAP_RIS_FAL        (3<<6)
-#define TCTL_CAP_ENA            (1<<5)
-#define TCTL_TEN                (1<<0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
index 2dacb3086f1c..be273371f34a 100644
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ b/arch/arm/plat-mxc/include/mach/usb.h
@@ -17,7 +17,7 @@
 
 struct imxusb_platform_data {
         int (*init)(struct device *);
-        int (*exit)(struct device *);
+        void (*exit)(struct device *);
 };
 
 #endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
new file mode 100644
index 000000000000..77a078f9513f
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE      IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ *      - reserves the pin so that it is not claimed by another driver
+ *      - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+        unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+        if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+                return -EBUSY;
+        if (pad->mux_ctrl_ofs)
+                __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+        if (pad->select_input_ofs)
+                __raw_writel(pad->select_input,
+                                IOMUX_BASE + pad->select_input_ofs);
+
+        if (!(pad->pad_ctrl & NO_PAD_CTRL))
+                __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+        return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+        struct pad_desc *p = pad_list;
+        int i;
+        int ret;
+
+        for (i = 0; i < count; i++) {
+                ret = mxc_iomux_v3_setup_pad(p);
+                if (ret)
+                        goto setup_error;
+                p++;
+        }
+        return 0;
+
+setup_error:
+        mxc_iomux_v3_release_multiple_pads(pad_list, i);
+        return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+        unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+        clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+        struct pad_desc *p = pad_list;
+        int i;
+
+        for (i = 0; i < count; i++) {
+                mxc_iomux_v3_release_pad(p);
+                p++;
+        }
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 0fb68a531f55..8aee76304f8f 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -24,31 +24,27 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 
-#define AVIC_BASE               IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL            (AVIC_BASE + 0x00)      /* int control reg */
-#define AVIC_NIMASK             (AVIC_BASE + 0x04)      /* int mask reg */
-#define AVIC_INTENNUM           (AVIC_BASE + 0x08)      /* int enable number reg */
-#define AVIC_INTDISNUM          (AVIC_BASE + 0x0C)      /* int disable number reg */
-#define AVIC_INTENABLEH         (AVIC_BASE + 0x10)      /* int enable reg high */
-#define AVIC_INTENABLEL         (AVIC_BASE + 0x14)      /* int enable reg low */
-#define AVIC_INTTYPEH           (AVIC_BASE + 0x18)      /* int type reg high */
-#define AVIC_INTTYPEL           (AVIC_BASE + 0x1C)      /* int type reg low */
-#define AVIC_NIPRIORITY(x)      (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR            (AVIC_BASE + 0x40)      /* norm int vector/status */
-#define AVIC_FIVECSR            (AVIC_BASE + 0x44)      /* fast int vector/status */
-#define AVIC_INTSRCH            (AVIC_BASE + 0x48)      /* int source reg high */
-#define AVIC_INTSRCL            (AVIC_BASE + 0x4C)      /* int source reg low */
-#define AVIC_INTFRCH            (AVIC_BASE + 0x50)      /* int force reg high */
-#define AVIC_INTFRCL            (AVIC_BASE + 0x54)      /* int force reg low */
-#define AVIC_NIPNDH             (AVIC_BASE + 0x58)      /* norm int pending high */
-#define AVIC_NIPNDL             (AVIC_BASE + 0x5C)      /* norm int pending low */
-#define AVIC_FIPNDH             (AVIC_BASE + 0x60)      /* fast int pending high */
-#define AVIC_FIPNDL             (AVIC_BASE + 0x64)      /* fast int pending low */
-
-#define SYSTEM_PREV_REG         IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG         IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH         3
-#define IIM_PROD_REV_LEN        5
+#define AVIC_INTCNTL            0x00    /* int control reg */
+#define AVIC_NIMASK             0x04    /* int mask reg */
+#define AVIC_INTENNUM           0x08    /* int enable number reg */
+#define AVIC_INTDISNUM          0x0C    /* int disable number reg */
+#define AVIC_INTENABLEH         0x10    /* int enable reg high */
+#define AVIC_INTENABLEL         0x14    /* int enable reg low */
+#define AVIC_INTTYPEH           0x18    /* int type reg high */
+#define AVIC_INTTYPEL           0x1C    /* int type reg low */
+#define AVIC_NIPRIORITY(x)      (0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR            0x40    /* norm int vector/status */
+#define AVIC_FIVECSR            0x44    /* fast int vector/status */
+#define AVIC_INTSRCH            0x48    /* int source reg high */
+#define AVIC_INTSRCL            0x4C    /* int source reg low */
+#define AVIC_INTFRCH            0x50    /* int force reg high */
+#define AVIC_INTFRCL            0x54    /* int force reg low */
+#define AVIC_NIPNDH             0x58    /* norm int pending high */
+#define AVIC_NIPNDL             0x5C    /* norm int pending low */
+#define AVIC_FIPNDH             0x60    /* fast int pending high */
+#define AVIC_FIPNDL             0x64    /* fast int pending low */
+
+static void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
         if (irq >= MXC_INTERNAL_IRQS)
                 return -EINVAL;;
 
-        temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+        temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
         temp &= ~mask;
         temp |= prio & mask;
 
-        __raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+        __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
 
         return 0;
 #else
@@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
                 return -EINVAL;
 
         if (irq < MXC_INTERNAL_IRQS / 2) {
-                irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
-                __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+                irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+                __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
         } else {
                 irq -= MXC_INTERNAL_IRQS / 2;
-                irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
-                __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+                irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+                __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
         }
 
         return 0;
@@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq);
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
-        __raw_writel(irq, AVIC_INTDISNUM);
+        __raw_writel(irq, avic_base + AVIC_INTDISNUM);
 }
 
 /* Enable interrupt number "irq" in the AVIC */
 static void mxc_unmask_irq(unsigned int irq)
 {
-        __raw_writel(irq, AVIC_INTENNUM);
+        __raw_writel(irq, avic_base + AVIC_INTENNUM);
 }
 
 static struct irq_chip mxc_avic_chip = {
@@ -121,19 +117,21 @@ void __init mxc_init_irq(void)
 {
         int i;
 
+        avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
         /* put the AVIC into the reset value with
          * all interrupts disabled
          */
-        __raw_writel(0, AVIC_INTCNTL);
-        __raw_writel(0x1f, AVIC_NIMASK);
+        __raw_writel(0, avic_base + AVIC_INTCNTL);
+        __raw_writel(0x1f, avic_base + AVIC_NIMASK);
 
         /* disable all interrupts */
-        __raw_writel(0, AVIC_INTENABLEH);
-        __raw_writel(0, AVIC_INTENABLEL);
+        __raw_writel(0, avic_base + AVIC_INTENABLEH);
+        __raw_writel(0, avic_base + AVIC_INTENABLEL);
 
         /* all IRQ no FIQ */
-        __raw_writel(0, AVIC_INTTYPEH);
-        __raw_writel(0, AVIC_INTTYPEL);
+        __raw_writel(0, avic_base + AVIC_INTTYPEH);
+        __raw_writel(0, avic_base + AVIC_INTTYPEL);
         for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
                 set_irq_chip(i, &mxc_avic_chip);
                 set_irq_handler(i, handle_level_irq);
@@ -142,7 +140,7 @@ void __init mxc_init_irq(void)
 
         /* Set default priority value (0) for all IRQ's */
         for (i = 0; i < 8; i++)
-                __raw_writel(0, AVIC_NIPRIORITY(i));
+                __raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
         /* init architectures chained interrupt handler */
         mxc_register_gpios();
@@ -154,3 +152,4 @@ void __init mxc_init_irq(void)
 
         printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 9bffbc507cc2..ae34198a79dd 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -15,65 +15,26 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC    0x00   /* PWM Control Register */
+#define MX1_PWMS    0x04   /* PWM Sample Register */
+#define MX1_PWMP    0x08   /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR                 0x00    /* PWM Control Register */
+#define MX3_PWMSAR                0x0C    /* PWM Sample Register */
+#define MX3_PWMPR                 0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN              (1 << 0)
+
 
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR   0x00    /* PWM Control Register         */
-#define PWMSR   0x04    /* PWM Sample Register          */
-#define PWMPR   0x08    /* PWM Period Register          */
-#define PWMCNR  0x0C    /* PWM Counter Register         */
-
-#define PWMCR_HCTR              (1 << 18)               /* Halfword FIFO Data Swapping  */
-#define PWMCR_BCTR              (1 << 17)               /* Byte FIFO Data Swapping      */
-#define PWMCR_SWR               (1 << 16)               /* Software Reset               */
-#define PWMCR_CLKSRC_PERCLK     (0 << 15)               /* PERCLK Clock Source          */
-#define PWMCR_CLKSRC_CLK32      (1 << 15)               /* 32KHz Clock Source           */
-#define PWMCR_PRESCALER(x)      (((x - 1) & 0x7F) << 8) /* PRESCALER                    */
-#define PWMCR_IRQ               (1 << 7)                /* Interrupt Request            */
-#define PWMCR_IRQEN             (1 << 6)                /* Interrupt Request Enable     */
-#define PWMCR_FIFOAV            (1 << 5)                /* FIFO Available               */
-#define PWMCR_EN                (1 << 4)                /* Enables/Disables the PWM     */
-#define PWMCR_REPEAT(x)         (((x) & 0x03) << 2)     /* Sample Repeats               */
-#define PWMCR_DIV(x)            (((x) & 0x03) << 0)     /* Clock divider 2/4/8/16       */
-
-#define MAX_DIV                 (128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR   0x00    /* PWM Control Register         */
-#define PWMSR   0x04    /* PWM Status Register          */
-#define PWMIR   0x08    /* PWM Interrupt Register       */
-#define PWMSAR  0x0C    /* PWM Sample Register          */
-#define PWMPR   0x10    /* PWM Period Register          */
-#define PWMCNR  0x14    /* PWM Counter Register         */
-
-#define PWMCR_EN                (1 << 0)                /* Enables/Disables the PWM     */
-#define PWMCR_REPEAT(x)         (((x) & 0x03) << 1)     /* Sample Repeats               */
-#define PWMCR_SWR               (1 << 3)                /* Software Reset               */
-#define PWMCR_PRESCALER(x)      (((x - 1) & 0xFFF) << 4)/* PRESCALER                    */
-#define PWMCR_CLKSRC(x)         (((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF        (0 << 16)
-#define PWMCR_CLKSRC_IPG        (1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH   (2 << 16)
-#define PWMCR_CLKSRC_CLK32      (3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR              (1 << 20)               /* Halfword FIFO Data Swapping  */
-#define PWMCR_BCTR              (1 << 21)               /* Byte FIFO Data Swapping      */
-#define PWMCR_DBGEN             (1 << 22)               /* Debug Mode                   */
-#define PWMCR_WAITEN            (1 << 23)               /* Wait Mode                    */
-#define PWMCR_DOZEN             (1 << 24)               /* Doze Mode                    */
-#define PWMCR_STOPEN            (1 << 25)               /* Stop Mode                    */
-#define PWMCR_FWM(x)            (((x) & 0x3) << 26)     /* FIFO Water Mark              */
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x)          ((x) & 0xFFFF)          /* Contains a two-sample word   */
-#define PWMP_PERIOD(x)          ((x) & 0xFFFF)          /* Represents the PWM's period  */
-#define PWMC_COUNTER(x)         ((x) & 0xFFFF)          /* Represents the current count value   */
 
 struct pwm_device {
         struct list_head        node;
@@ -91,32 +52,52 @@ struct pwm_device {
 
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 {
-        unsigned long long c;
-        unsigned long period_cycles, duty_cycles, prescale;
-
         if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
                 return -EINVAL;
 
-        c = clk_get_rate(pwm->clk);
-        c = c * period_ns;
-        do_div(c, 1000000000);
-        period_cycles = c;
-
-        prescale = period_cycles / 0x10000 + 1;
-
-        period_cycles /= prescale;
-        c = (unsigned long long)period_cycles * duty_ns;
-        do_div(c, period_ns);
-        duty_cycles = c;
-
-#ifdef PWM_VER_2
-        writel(duty_cycles, pwm->mmio_base + PWMSAR);
-        writel(period_cycles, pwm->mmio_base + PWMPR);
-        writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
-                        pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+        if (cpu_is_mx27() || cpu_is_mx3()) {
+                unsigned long long c;
+                unsigned long period_cycles, duty_cycles, prescale;
+                c = clk_get_rate(pwm->clk);
+                c = c * period_ns;
+                do_div(c, 1000000000);
+                period_cycles = c;
+
+                prescale = period_cycles / 0x10000 + 1;
+
+                period_cycles /= prescale;
+                c = (unsigned long long)period_cycles * duty_ns;
+                do_div(c, period_ns);
+                duty_cycles = c;
+
+                writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+                writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+                writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+                        MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+                        pwm->mmio_base + MX3_PWMCR);
+        } else if (cpu_is_mx1() || cpu_is_mx21()) {
+                /* The PWM subsystem allows for exact frequencies. However,
+                 * I cannot connect a scope on my device to the PWM line and
+                 * thus cannot provide the program the PWM controller
+                 * exactly. Instead, I'm relying on the fact that the
+                 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+                 * function group already. So I'll just modify the PWM sample
+                 * register to follow the ratio of duty_ns vs. period_ns
+                 * accordingly.
+                 *
+                 * This is good enought for programming the brightness of
+                 * the LCD backlight.
+                 *
+                 * The real implementation would divide PERCLK[0] first by
+                 * both the prescaler (/1 .. /128) and then by CLKSEL
+                 * (/2 .. /16).
+                 */
+                u32 max = readl(pwm->mmio_base + MX1_PWMP);
+                u32 p = max * duty_ns / period_ns;
+                writel(max - p, pwm->mmio_base + MX1_PWMS);
+        } else {
+                BUG();
+        }
 
         return 0;
 }
@@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index dab3357196fb..88fb3a57e029 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -29,22 +29,85 @@
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL                0x00
+#define MXC_TCTL_TEN            (1 << 0)
+#define MXC_TPRER               0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1    (1 << 1)
+#define MX1_2_TCTL_IRQEN        (1 << 4)
+#define MX1_2_TCTL_FRR          (1 << 8)
+#define MX1_2_TCMP              0x08
+#define MX1_2_TCN               0x10
+#define MX1_2_TSTAT             0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT          (1 << 1)
+#define MX2_TSTAT_COMP          (1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN         (1 << 3)
+#define MX3_TCTL_CLK_IPG        (1 << 6)
+#define MX3_TCTL_FRR            (1 << 9)
+#define MX3_IR                  0x0c
+#define MX3_TSTAT               0x08
+#define MX3_TSTAT_OF1           (1 << 0)
+#define MX3_TCN                 0x24
+#define MX3_TCMP                0x10
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-/* clock source */
+static void __iomem *timer_base;
 
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
 {
-        return __raw_readl(TIMER_BASE + MXC_TCN);
+        unsigned int tmp;
+
+        if (cpu_is_mx3())
+                __raw_writel(0, timer_base + MX3_IR);
+        else {
+                tmp = __raw_readl(timer_base + MXC_TCTL);
+                __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+        }
+}
+
+static inline void gpt_irq_enable(void)
+{
+        if (cpu_is_mx3())
+                __raw_writel(1<<0, timer_base + MX3_IR);
+        else {
+                __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+                        timer_base + MXC_TCTL);
+        }
+}
+
+static void gpt_irq_acknowledge(void)
+{
+        if (cpu_is_mx1())
+                __raw_writel(0, timer_base + MX1_2_TSTAT);
+        if (cpu_is_mx2())
+                __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+        if (cpu_is_mx3())
+                __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+        return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+        return __raw_readl(timer_base + MX3_TCN);
 }
 
 static struct clocksource clocksource_mxc = {
         .name           = "mxc_timer1",
         .rating         = 200,
-        .read           = mxc_get_cycles,
+        .read           = mx1_2_get_cycles,
         .mask           = CLOCKSOURCE_MASK(32),
         .shift          = 20,
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
         unsigned int c = clk_get_rate(timer_clk);
 
+        if (cpu_is_mx3())
+                clocksource_mxc.read = mx3_get_cycles;
+
         clocksource_mxc.mult = clocksource_hz2mult(c,
                                         clocksource_mxc.shift);
         clocksource_register(&clocksource_mxc);
@@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 /* clock event */
 
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
                               struct clock_event_device *unused)
 {
         unsigned long tcmp;
 
-        tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
-        __raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+        tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
 
-        return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+        __raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+        return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+                                -ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+                              struct clock_event_device *unused)
+{
+        unsigned long tcmp;
+
+        tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+        __raw_writel(tcmp, timer_base + MX3_TCMP);
+
+        return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
                                 -ETIME : 0;
 }
 
@@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
         if (mode != clockevent_mode) {
                 /* Set event time into far-far future */
-                __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
-                                TIMER_BASE + MXC_TCMP);
+                if (cpu_is_mx3())
+                        __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+                                        timer_base + MX3_TCMP);
+                else
+                        __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+                                        timer_base + MX1_2_TCMP);
+
                 /* Clear pending interrupt */
                 gpt_irq_acknowledge();
         }
@@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
         struct clock_event_device *evt = &clockevent_mxc;
         uint32_t tstat;
 
-        tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+        if (cpu_is_mx3())
+                tstat = __raw_readl(timer_base + MX3_TSTAT);
+        else
+                tstat = __raw_readl(timer_base + MX1_2_TSTAT);
 
         gpt_irq_acknowledge();
 
@@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = {
         .features       = CLOCK_EVT_FEAT_ONESHOT,
         .shift          = 32,
         .set_mode       = mxc_set_mode,
-        .set_next_event = mxc_set_next_event,
+        .set_next_event = mx1_2_set_next_event,
         .rating         = 200,
 };
 
@@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
         unsigned int c = clk_get_rate(timer_clk);
 
+        if (cpu_is_mx3())
+                clockevent_mxc.set_next_event = mx3_set_next_event;
+
         clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
                                         clockevent_mxc.shift);
         clockevent_mxc.max_delta_ns =
@@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 
 void __init mxc_timer_init(struct clk *timer_clk)
 {
+        uint32_t tctl_val;
+        int irq;
+
         clk_enable(timer_clk);
 
+        if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+                timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+                irq = TIM1_INT;
+#endif
+        } else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+                timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+                irq = MXC_INT_GPT1;
+#endif
+        } else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+                timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+                irq = MXC_INT_GPT;
+#endif
+        } else
+                BUG();
+
         /*
          * Initialise to a known state (all timers off, and timing reset)
          */
-        __raw_writel(0, TIMER_BASE + MXC_TCTL);
-        __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
 
-        __raw_writel(TCTL_FRR | /* free running */
-                     TCTL_VAL | /* set clocksource and arch specific bits */
-                     TCTL_TEN,  /* start the timer */
-                     TIMER_BASE + MXC_TCTL);
+        __raw_writel(0, timer_base + MXC_TCTL);
+        __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+        if (cpu_is_mx3())
+                tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+        else
+                tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+        __raw_writel(tctl_val, timer_base + MXC_TCTL);
 
         /* init and register the timer to the framework */
         mxc_clocksource_init(timer_clk);
         mxc_clockevent_init(timer_clk);
 
         /* Make irqs happen */
-        setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+        setup_irq(irq, &mxc_timer_irq);
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f8a61249f7d9..9a6ecc7159b7 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -120,6 +120,9 @@ config OMAP_MBOX_FWK
           Say Y here if you want to use OMAP Mailbox framework support for
           DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 
+config OMAP_IOMMU
+        tristate
+
 choice
         prompt "System timer"
         default OMAP_MPU_TIMER
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 04a100cfb8e5..a83279523958 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -13,6 +13,7 @@ obj-  :=
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
new file mode 100644
index 000000000000..769b00b4c34a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+        u32 da;
+        u32 pa;
+        u32 pgsz, prsvd, valid;
+        union {
+                u16 ap;
+                struct {
+                        u32 endian, elsz, mixed;
+                };
+        };
+};
+
+struct iommu {
+        const char      *name;
+        struct module   *owner;
+        struct clk      *clk;
+        void __iomem    *regbase;
+        struct device   *dev;
+
+        unsigned int    refcount;
+        struct mutex    iommu_lock;     /* global for this whole object */
+
+        /*
+         * We don't change iopgd for a situation like pgd for a task,
+         * but share it globally for each iommu.
+         */
+        u32             *iopgd;
+        spinlock_t      page_table_lock; /* protect iopgd */
+
+        int             nr_tlb_entries;
+
+        struct list_head        mmap;
+        struct mutex            mmap_lock; /* protect mmap */
+
+        int (*isr)(struct iommu *obj);
+
+        void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+        union {
+                struct {
+                        u16 cam_l;
+                        u16 cam_h;
+                };
+                u32 cam;
+        };
+        union {
+                struct {
+                        u16 ram_l;
+                        u16 ram_h;
+                };
+                u32 ram;
+        };
+};
+
+struct iotlb_lock {
+        short base;
+        short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+        unsigned long   version;
+
+        int (*enable)(struct iommu *obj);
+        void (*disable)(struct iommu *obj);
+        u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+        void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+        void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+        struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+        int (*cr_valid)(struct cr_regs *cr);
+        u32 (*cr_to_virt)(struct cr_regs *cr);
+        void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+        ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+        u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+        void (*save_ctx)(struct iommu *obj);
+        void (*restore_ctx)(struct iommu *obj);
+        ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+        const char *name;
+        const char *clk_name;
+        const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes)                       \
+        (((bytes) >= SZ_16M) ? SZ_16M :         \
+         ((bytes) >= SZ_1M)  ? SZ_1M  :         \
+         ((bytes) >= SZ_64K) ? SZ_64K :         \
+         ((bytes) >= SZ_4K)  ? SZ_4K  : 0)
+
+#define bytes_to_iopgsz(bytes)                          \
+        (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :       \
+         ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :       \
+         ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :       \
+         ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
+
+#define iopgsz_to_bytes(iopgsz)                         \
+        (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M :      \
+         ((iopgsz) == MMU_CAM_PGSZ_1M)  ? SZ_1M  :      \
+         ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K :      \
+         ((iopgsz) == MMU_CAM_PGSZ_4K)  ? SZ_4K  : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+                                int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h
new file mode 100644
index 000000000000..10ad05f410e9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION            0x00
+#define MMU_SYSCONFIG           0x10
+#define MMU_SYSSTATUS           0x14
+#define MMU_IRQSTATUS           0x18
+#define MMU_IRQENABLE           0x1c
+#define MMU_WALKING_ST          0x40
+#define MMU_CNTL                0x44
+#define MMU_FAULT_AD            0x48
+#define MMU_TTB                 0x4c
+#define MMU_LOCK                0x50
+#define MMU_LD_TLB              0x54
+#define MMU_CAM                 0x58
+#define MMU_RAM                 0x5c
+#define MMU_GFLUSH              0x60
+#define MMU_FLUSH_ENTRY         0x64
+#define MMU_READ_CAM            0x68
+#define MMU_READ_RAM            0x6c
+#define MMU_EMU_FAULT_AD        0x70
+
+#define MMU_REG_SIZE            256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT     10
+#define MMU_LOCK_BASE_MASK      (0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x)        \
+        ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT     4
+#define MMU_LOCK_VICT_MASK      (0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x)        \
+        ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT     12
+#define MMU_CAM_VATAG_MASK \
+        ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P               (1 << 3)
+#define MMU_CAM_V               (1 << 2)
+#define MMU_CAM_PGSZ_MASK       3
+#define MMU_CAM_PGSZ_1M         (0 << 0)
+#define MMU_CAM_PGSZ_64K        (1 << 0)
+#define MMU_CAM_PGSZ_4K         (2 << 0)
+#define MMU_CAM_PGSZ_16M        (3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT     12
+#define MMU_RAM_PADDR_MASK \
+        ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT    9
+#define MMU_RAM_ENDIAN_MASK     (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG      (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE   (0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT      7
+#define MMU_RAM_ELSZ_MASK       (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8          (0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16         (1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32         (2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE       (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT     6
+#define MMU_RAM_MIXED_MASK      (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED           MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+        return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+        __raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h
new file mode 100644
index 000000000000..bdc7ce5d7a4a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iovmm.h
@@ -0,0 +1,94 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+        struct iommu            *iommu; /* iommu object which this belongs to */
+        u32                     da_start; /* area definition */
+        u32                     da_end;
+        u32                     flags; /* IOVMF_: see below */
+        struct list_head        list; /* linked in ascending order */
+        const struct sg_table   *sgt; /* keep 'page' <-> 'da' mapping */
+        void                    *va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT          16
+#define IOVMF_HW_SIZE           (1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK           (IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK           (~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK          (~((1 << 10) - 1))
+#define IOVMF_RAM_MASK          (~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK         (3 << 0)
+#define IOVMF_PGSZ_1M           MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K          MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K           MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M          MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK       (1 << 9)
+#define IOVMF_ENDIAN_BIG        MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE     MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK         (3 << 7)
+#define IOVMF_ELSZ_8            MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16           MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32           MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE         MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK        (1 << 6)
+#define IOVMF_MIXED             MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO              (1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC             (2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK        (3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT           (1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR            (2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK       (3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED          (1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON           (2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK           (3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+                        const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+                           u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+                        u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+                           u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
new file mode 100644
index 000000000000..4cf449fa2cb5
--- /dev/null
+++ b/arch/arm/plat-omap/iommu.c
@@ -0,0 +1,996 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *              Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops:        a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+        if (arch_iommu)
+                return -EBUSY;
+
+        arch_iommu = ops;
+        return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops:        a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+        if (arch_iommu != ops)
+                pr_err("%s: not your arch\n", __func__);
+
+        arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj:        target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+        arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj:        target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+        arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+        return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+        int err;
+
+        if (!obj)
+                return -EINVAL;
+
+        clk_enable(obj->clk);
+
+        err = arch_iommu->enable(obj);
+
+        clk_disable(obj->clk);
+        return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+        if (!obj)
+                return;
+
+        clk_enable(obj->clk);
+
+        arch_iommu->disable(obj);
+
+        clk_disable(obj->clk);
+}
+
+/*
+ *      TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+        BUG_ON(!cr || !e);
+
+        arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+        if (!cr)
+                return -EINVAL;
+
+        return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+                                             struct iotlb_entry *e)
+{
+        if (!e)
+                return NULL;
+
+        return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+        return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+        return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+        return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+        u32 val;
+
+        val = iommu_read_reg(obj, MMU_LOCK);
+
+        l->base = MMU_LOCK_BASE(val);
+        l->vict = MMU_LOCK_VICT(val);
+
+        BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+        u32 val;
+
+        BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+        val = (l->base << MMU_LOCK_BASE_SHIFT);
+        val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+        iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+        arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+        arch_iommu->tlb_load_cr(obj, cr);
+
+        iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+        iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj:        target iommu
+ * @cr:         contents of cam and ram register
+ * @buf:        output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+                                    char *buf)
+{
+        BUG_ON(!cr || !buf);
+
+        return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj:        target iommu
+ * @e:          an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+        int i;
+        int err = 0;
+        struct iotlb_lock l;
+        struct cr_regs *cr;
+
+        if (!obj || !obj->nr_tlb_entries || !e)
+                return -EINVAL;
+
+        clk_enable(obj->clk);
+
+        for (i = 0; i < obj->nr_tlb_entries; i++) {
+                struct cr_regs tmp;
+
+                iotlb_lock_get(obj, &l);
+                l.vict = i;
+                iotlb_lock_set(obj, &l);
+                iotlb_read_cr(obj, &tmp);
+                if (!iotlb_cr_valid(&tmp))
+                        break;
+        }
+
+        if (i == obj->nr_tlb_entries) {
+                dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+                err = -EBUSY;
+                goto out;
+        }
+
+        cr = iotlb_alloc_cr(obj, e);
+        if (IS_ERR(cr)) {
+                clk_disable(obj->clk);
+                return PTR_ERR(cr);
+        }
+
+        iotlb_load_cr(obj, cr);
+        kfree(cr);
+
+        /* increment victim for next tlb load */
+        if (++l.vict == obj->nr_tlb_entries)
+                l.vict = 0;
+        iotlb_lock_set(obj, &l);
+out:
+        clk_disable(obj->clk);
+        return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj:        target iommu
+ * @da:         iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+        struct iotlb_lock l;
+        int i;
+
+        clk_enable(obj->clk);
+
+        for (i = 0; i < obj->nr_tlb_entries; i++) {
+                struct cr_regs cr;
+                u32 start;
+                size_t bytes;
+
+                iotlb_lock_get(obj, &l);
+                l.vict = i;
+                iotlb_lock_set(obj, &l);
+                iotlb_read_cr(obj, &cr);
+                if (!iotlb_cr_valid(&cr))
+                        continue;
+
+                start = iotlb_cr_to_virt(&cr);
+                bytes = iopgsz_to_bytes(cr.cam & 3);
+
+                if ((start <= da) && (da < start + bytes)) {
+                        dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+                                __func__, start, da, bytes);
+
+                        iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+                }
+        }
+        clk_disable(obj->clk);
+
+        if (i == obj->nr_tlb_entries)
+                dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj:        target iommu
+ * @start:      iommu device virtual address(start)
+ * @end:        iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+        u32 da = start;
+
+        while (da < end) {
+                flush_iotlb_page(obj, da);
+                /* FIXME: Optimize for multiple page size */
+                da += IOPTE_SIZE;
+        }
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj:        target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+        struct iotlb_lock l;
+
+        clk_enable(obj->clk);
+
+        l.base = 0;
+        l.vict = 0;
+        iotlb_lock_set(obj, &l);
+
+        iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+        clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+        ssize_t bytes;
+
+        if (!obj || !buf)
+                return -EINVAL;
+
+        clk_enable(obj->clk);
+
+        bytes = arch_iommu->dump_ctx(obj, buf);
+
+        clk_disable(obj->clk);
+
+        return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+        int i;
+        struct iotlb_lock saved, l;
+        struct cr_regs *p = crs;
+
+        clk_enable(obj->clk);
+
+        iotlb_lock_get(obj, &saved);
+        memcpy(&l, &saved, sizeof(saved));
+
+        for (i = 0; i < obj->nr_tlb_entries; i++) {
+                struct cr_regs tmp;
+
+                iotlb_lock_get(obj, &l);
+                l.vict = i;
+                iotlb_lock_set(obj, &l);
+                iotlb_read_cr(obj, &tmp);
+                if (!iotlb_cr_valid(&tmp))
+                        continue;
+
+                *p++ = tmp;
+        }
+        iotlb_lock_set(obj, &saved);
+        clk_disable(obj->clk);
+
+        return  p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj:        target iommu
+ * @buf:        output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+        int i, n;
+        struct cr_regs *cr;
+        char *p = buf;
+
+        cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+        if (!cr)
+                return 0;
+
+        n = __dump_tlb_entries(obj, cr);
+        for (i = 0; i < n; i++)
+                p += iotlb_dump_cr(obj, cr + i, p);
+        kfree(cr);
+
+        return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+        return driver_for_each_device(&omap_iommu_driver.driver,
+                                      NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ *      H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+        /* FIXME: L2 cache should be taken care of if it exists */
+        do {
+                asm("mcr        p15, 0, %0, c7, c10, 1 @ flush_pgd"
+                    : : "r" (first));
+                first += L1_CACHE_BYTES / sizeof(*first);
+        } while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+        /* FIXME: L2 cache should be taken care of if it exists */
+        do {
+                asm("mcr        p15, 0, %0, c7, c10, 1 @ flush_pte"
+                    : : "r" (first));
+                first += L1_CACHE_BYTES / sizeof(*first);
+        } while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+        /* Note: freed iopte's must be clean ready for re-use */
+        kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+        u32 *iopte;
+
+        /* a table has already existed */
+        if (*iopgd)
+                goto pte_ready;
+
+        /*
+         * do the allocation outside the page table lock
+         */
+        spin_unlock(&obj->page_table_lock);
+        iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+        spin_lock(&obj->page_table_lock);
+
+        if (!*iopgd) {
+                if (!iopte)
+                        return ERR_PTR(-ENOMEM);
+
+                *iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+                flush_iopgd_range(iopgd, iopgd);
+
+                dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+        } else {
+                /* We raced, free the reduniovant table */
+                iopte_free(iopte);
+        }
+
+pte_ready:
+        iopte = iopte_offset(iopgd, da);
+
+        dev_vdbg(obj->dev,
+                 "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+                 __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+        return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+        u32 *iopgd = iopgd_offset(obj, da);
+
+        *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+        flush_iopgd_range(iopgd, iopgd);
+        return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+        u32 *iopgd = iopgd_offset(obj, da);
+        int i;
+
+        for (i = 0; i < 16; i++)
+                *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+        flush_iopgd_range(iopgd, iopgd + 15);
+        return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+        u32 *iopgd = iopgd_offset(obj, da);
+        u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+        if (IS_ERR(iopte))
+                return PTR_ERR(iopte);
+
+        *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+        flush_iopte_range(iopte, iopte);
+
+        dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+                 __func__, da, pa, iopte, *iopte);
+
+        return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+        u32 *iopgd = iopgd_offset(obj, da);
+        u32 *iopte = iopte_alloc(obj, iopgd, da);
+        int i;
+
+        if (IS_ERR(iopte))
+                return PTR_ERR(iopte);
+
+        for (i = 0; i < 16; i++)
+                *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+        flush_iopte_range(iopte, iopte + 15);
+        return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+        int (*fn)(struct iommu *, u32, u32, u32);
+        u32 prot;
+        int err;
+
+        if (!obj || !e)
+                return -EINVAL;
+
+        switch (e->pgsz) {
+        case MMU_CAM_PGSZ_16M:
+                fn = iopgd_alloc_super;
+                break;
+        case MMU_CAM_PGSZ_1M:
+                fn = iopgd_alloc_section;
+                break;
+        case MMU_CAM_PGSZ_64K:
+                fn = iopte_alloc_large;
+                break;
+        case MMU_CAM_PGSZ_4K:
+                fn = iopte_alloc_page;
+                break;
+        default:
+                fn = NULL;
+                BUG();
+                break;
+        }
+
+        prot = get_iopte_attr(e);
+
+        spin_lock(&obj->page_table_lock);
+        err = fn(obj, e->da, e->pa, prot);
+        spin_unlock(&obj->page_table_lock);
+
+        return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj:        target iommu
+ * @e:          an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+        int err;
+
+        flush_iotlb_page(obj, e->da);
+        err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+        if (!err)
+                load_iotlb_entry(obj, e);
+#endif
+        return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj:        target iommu
+ * @da:         iommu device virtual address
+ * @ppgd:       iommu pgd entry pointer to be returned
+ * @ppte:       iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+        u32 *iopgd, *iopte = NULL;
+
+        iopgd = iopgd_offset(obj, da);
+        if (!*iopgd)
+                goto out;
+
+        if (*iopgd & IOPGD_TABLE)
+                iopte = iopte_offset(iopgd, da);
+out:
+        *ppgd = iopgd;
+        *ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+        size_t bytes;
+        u32 *iopgd = iopgd_offset(obj, da);
+        int nent = 1;
+
+        if (!*iopgd)
+                return 0;
+
+        if (*iopgd & IOPGD_TABLE) {
+                int i;
+                u32 *iopte = iopte_offset(iopgd, da);
+
+                bytes = IOPTE_SIZE;
+                if (*iopte & IOPTE_LARGE) {
+                        nent *= 16;
+                        /* rewind to the 1st entry */
+                        iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+                }
+                bytes *= nent;
+                memset(iopte, 0, nent * sizeof(*iopte));
+                flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+                /*
+                 * do table walk to check if this table is necessary or not
+                 */
+                iopte = iopte_offset(iopgd, 0);
+                for (i = 0; i < PTRS_PER_IOPTE; i++)
+                        if (iopte[i])
+                                goto out;
+
+                iopte_free(iopte);
+                nent = 1; /* for the next L1 entry */
+        } else {
+                bytes = IOPGD_SIZE;
+                if (*iopgd & IOPGD_SUPER) {
+                        nent *= 16;
+                        /* rewind to the 1st entry */
+                        iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+                }
+                bytes *= nent;
+        }
+        memset(iopgd, 0, nent * sizeof(*iopgd));
+        flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+        return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj:        target iommu
+ * @da:         iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+        size_t bytes;
+
+        spin_lock(&obj->page_table_lock);
+
+        bytes = iopgtable_clear_entry_core(obj, da);
+        flush_iotlb_page(obj, da);
+
+        spin_unlock(&obj->page_table_lock);
+
+        return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+        int i;
+
+        spin_lock(&obj->page_table_lock);
+
+        for (i = 0; i < PTRS_PER_IOPGD; i++) {
+                u32 da;
+                u32 *iopgd;
+
+                da = i << IOPGD_SHIFT;
+                iopgd = iopgd_offset(obj, da);
+
+                if (!*iopgd)
+                        continue;
+
+                if (*iopgd & IOPGD_TABLE)
+                        iopte_free(iopte_offset(iopgd, 0));
+
+                *iopgd = 0;
+                flush_iopgd_range(iopgd, iopgd);
+        }
+
+        flush_iotlb_all(obj);
+
+        spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ *      Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+        u32 stat, da;
+        u32 *iopgd, *iopte;
+        int err = -EIO;
+        struct iommu *obj = data;
+
+        if (!obj->refcount)
+                return IRQ_NONE;
+
+        /* Dynamic loading TLB or PTE */
+        if (obj->isr)
+                err = obj->isr(obj);
+
+        if (!err)
+                return IRQ_HANDLED;
+
+        clk_enable(obj->clk);
+        stat = iommu_report_fault(obj, &da);
+        clk_disable(obj->clk);
+        if (!stat)
+                return IRQ_HANDLED;
+
+        iopgd = iopgd_offset(obj, da);
+
+        if (!(*iopgd & IOPGD_TABLE)) {
+                dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+                        da, iopgd, *iopgd);
+                return IRQ_NONE;
+        }
+
+        iopte = iopte_offset(iopgd, da);
+
+        dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+                __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+        return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+        struct iommu *obj = to_iommu(dev);
+        const char *name = data;
+
+        pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+        return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name:       target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+        int err = -ENOMEM;
+        struct device *dev;
+        struct iommu *obj;
+
+        dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+                                 device_match_by_alias);
+        if (!dev)
+                return ERR_PTR(-ENODEV);
+
+        obj = to_iommu(dev);
+
+        mutex_lock(&obj->iommu_lock);
+
+        if (obj->refcount++ == 0) {
+                err = iommu_enable(obj);
+                if (err)
+                        goto err_enable;
+                flush_iotlb_all(obj);
+        }
+
+        if (!try_module_get(obj->owner))
+                goto err_module;
+
+        mutex_unlock(&obj->iommu_lock);
+
+        dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+        return obj;
+
+err_module:
+        if (obj->refcount == 1)
+                iommu_disable(obj);
+err_enable:
+        obj->refcount--;
+        mutex_unlock(&obj->iommu_lock);
+        return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj:        target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+        if (!obj && IS_ERR(obj))
+                return;
+
+        mutex_lock(&obj->iommu_lock);
+
+        if (--obj->refcount == 0)
+                iommu_disable(obj);
+
+        module_put(obj->owner);
+
+        mutex_unlock(&obj->iommu_lock);
+
+        dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ *      OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+        int err = -ENODEV;
+        void *p;
+        int irq;
+        struct iommu *obj;
+        struct resource *res;
+        struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+        if (pdev->num_resources != 2)
+                return -EINVAL;
+
+        obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+        if (!obj)
+                return -ENOMEM;
+
+        obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+        if (IS_ERR(obj->clk))
+                goto err_clk;
+
+        obj->nr_tlb_entries = pdata->nr_tlb_entries;
+        obj->name = pdata->name;
+        obj->dev = &pdev->dev;
+        obj->ctx = (void *)obj + sizeof(*obj);
+
+        mutex_init(&obj->iommu_lock);
+        mutex_init(&obj->mmap_lock);
+        spin_lock_init(&obj->page_table_lock);
+        INIT_LIST_HEAD(&obj->mmap);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                err = -ENODEV;
+                goto err_mem;
+        }
+        obj->regbase = ioremap(res->start, resource_size(res));
+        if (!obj->regbase) {
+                err = -ENOMEM;
+                goto err_mem;
+        }
+
+        res = request_mem_region(res->start, resource_size(res),
+                                 dev_name(&pdev->dev));
+        if (!res) {
+                err = -EIO;
+                goto err_mem;
+        }
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0) {
+                err = -ENODEV;
+                goto err_irq;
+        }
+        err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+                          dev_name(&pdev->dev), obj);
+        if (err < 0)
+                goto err_irq;
+        platform_set_drvdata(pdev, obj);
+
+        p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+        if (!p) {
+                err = -ENOMEM;
+                goto err_pgd;
+        }
+        memset(p, 0, IOPGD_TABLE_SIZE);
+        clean_dcache_area(p, IOPGD_TABLE_SIZE);
+        obj->iopgd = p;
+
+        BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+        dev_info(&pdev->dev, "%s registered\n", obj->name);
+        return 0;
+
+err_pgd:
+        free_irq(irq, obj);
+err_irq:
+        release_mem_region(res->start, resource_size(res));
+        iounmap(obj->regbase);
+err_mem:
+        clk_put(obj->clk);
+err_clk:
+        kfree(obj);
+        return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+        int irq;
+        struct resource *res;
+        struct iommu *obj = platform_get_drvdata(pdev);
+
+        platform_set_drvdata(pdev, NULL);
+
+        iopgtable_clear_entry_all(obj);
+        free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+        irq = platform_get_irq(pdev, 0);
+        free_irq(irq, obj);
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        release_mem_region(res->start, resource_size(res));
+        iounmap(obj->regbase);
+
+        clk_put(obj->clk);
+        dev_info(&pdev->dev, "%s removed\n", obj->name);
+        kfree(obj);
+        return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+        .probe  = omap_iommu_probe,
+        .remove = __devexit_p(omap_iommu_remove),
+        .driver = {
+                .name   = "omap-iommu",
+        },
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+        clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+        struct kmem_cache *p;
+        const unsigned long flags = SLAB_HWCACHE_ALIGN;
+        size_t align = 1 << 10; /* L2 pagetable alignement */
+
+        p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+                              iopte_cachep_ctor);
+        if (!p)
+                return -ENOMEM;
+        iopte_cachep = p;
+
+        return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+        kmem_cache_destroy(iopte_cachep);
+
+        platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
new file mode 100644
index 000000000000..37dac434c7a1
--- /dev/null
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -0,0 +1,72 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT             20
+#define IOPGD_SIZE              (1 << IOPGD_SHIFT)
+#define IOPGD_MASK              (~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK          IOPGD_MASK
+#define PTRS_PER_IOPGD          (1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE        (PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE            (IOPGD_SIZE << 4)
+#define IOSUPER_MASK            (~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT             12
+#define IOPTE_SIZE              (1 << IOPTE_SHIFT)
+#define IOPTE_MASK              (~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK             IOPTE_MASK
+#define PTRS_PER_IOPTE          (1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE        (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE            (IOPTE_SIZE << 4)
+#define IOLARGE_MASK            (~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE             (1 << 0)
+#define IOPGD_SECTION           (2 << 0)
+#define IOPGD_SUPER             (1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL             (2 << 0)
+#define IOPTE_LARGE             (1 << 0)
+
+#define iopgd_index(da)         (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da)   ((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd)      (*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd)      ((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da)         (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+                                   u32 flags)
+{
+        memset(e, 0, sizeof(*e));
+
+        e->da           = da;
+        e->pa           = pa;
+        e->valid        = 1;
+        /* FIXME: add OMAP1 support */
+        e->pgsz         = flags & MMU_CAM_PGSZ_MASK;
+        e->endian       = flags & MMU_RAM_ENDIAN_MASK;
+        e->elsz         = flags & MMU_RAM_ELSZ_MASK;
+        e->mixed        = flags & MMU_RAM_MIXED_MASK;
+
+        return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev)                                                   \
+        (struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
new file mode 100644
index 000000000000..2fce2c151a95
--- /dev/null
+++ b/arch/arm/plat-omap/iovmm.c
@@ -0,0 +1,896 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ *    |iova/                      mapping               iommu_          page
+ *    | da      pa      va      (d)-(p)-(v)             function        type
+ *  ---------------------------------------------------------------------------
+ *  1 | c       c       c        1 - 1 - 1        _kmap() / _kunmap()   s
+ *  2 | c       c,a     c        1 - 1 - 1      _kmalloc()/ _kfree()    s
+ *  3 | c       d       c        1 - n - 1        _vmap() / _vunmap()   s
+ *  4 | c       d,a     c        1 - n - 1      _vmalloc()/ _vfree()    n*
+ *
+ *
+ *      'iova': device iommu virtual address
+ *      'da':   alias of 'iova'
+ *      'pa':   physical address
+ *      'va':   mpu virtual address
+ *
+ *      'c':    contiguous memory area
+ *      'd':    dicontiguous memory area
+ *      'a':    anonymous memory allocation
+ *      '()':   optional feature
+ *
+ *      'n':    a normal page(4KB) size is used.
+ *      's':    multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ *      '*':    not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+        unsigned int i, total = 0;
+        struct scatterlist *sg;
+
+        if (!sgt)
+                return 0;
+
+        for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+                size_t bytes;
+
+                bytes = sg_dma_len(sg);
+
+                if (!iopgsz_ok(bytes)) {
+                        pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+                               __func__, i, bytes);
+                        return 0;
+                }
+
+                total += bytes;
+        }
+
+        return total;
+}
+#define sgtable_ok(x)   (!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+        int i;
+        unsigned int nr_entries;
+        const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+        if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+                pr_err("%s: wrong size %08x\n", __func__, bytes);
+                return 0;
+        }
+
+        nr_entries = 0;
+        for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+                if (bytes >= pagesize[i]) {
+                        nr_entries += (bytes / pagesize[i]);
+                        bytes %= pagesize[i];
+                }
+        }
+        BUG_ON(bytes);
+
+        return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+        unsigned int nr_entries;
+        int err;
+        struct sg_table *sgt;
+
+        if (!bytes)
+                return ERR_PTR(-EINVAL);
+
+        if (!IS_ALIGNED(bytes, PAGE_SIZE))
+                return ERR_PTR(-EINVAL);
+
+        /* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+        if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+                nr_entries = sgtable_nents(bytes);
+                if (!nr_entries)
+                        return ERR_PTR(-EINVAL);
+        } else
+                nr_entries =  bytes / PAGE_SIZE;
+
+        sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+        if (!sgt)
+                return ERR_PTR(-ENOMEM);
+
+        err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+        if (err)
+                return ERR_PTR(err);
+
+        pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+        return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+        if (!sgt)
+                return;
+
+        sg_free_table(sgt);
+        kfree(sgt);
+
+        pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+        u32 va;
+        size_t total;
+        unsigned int i;
+        struct scatterlist *sg;
+        struct vm_struct *new;
+        const struct mem_type *mtype;
+
+        mtype = get_mem_type(MT_DEVICE);
+        if (!mtype)
+                return ERR_PTR(-EINVAL);
+
+        total = sgtable_len(sgt);
+        if (!total)
+                return ERR_PTR(-EINVAL);
+
+        new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+        if (!new)
+                return ERR_PTR(-ENOMEM);
+        va = (u32)new->addr;
+
+        for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+                size_t bytes;
+                u32 pa;
+                int err;
+
+                pa = sg_phys(sg);
+                bytes = sg_dma_len(sg);
+
+                BUG_ON(bytes != PAGE_SIZE);
+
+                err = ioremap_page(va,  pa, mtype);
+                if (err)
+                        goto err_out;
+
+                va += bytes;
+        }
+
+        flush_cache_vmap(new->addr, total);
+        return new->addr;
+
+err_out:
+        WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+        vunmap(new->addr);
+        return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+        vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+        struct iovm_struct *tmp;
+
+        list_for_each_entry(tmp, &obj->mmap, list) {
+                if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+                        size_t len;
+
+                        len = tmp->da_end - tmp->da_start;
+
+                        dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+                                __func__, tmp->da_start, da, tmp->da_end, len,
+                                tmp->flags);
+
+                        return tmp;
+                }
+        }
+
+        return NULL;
+}
+
+/**
+ * find_iovm_area  -  find iovma which includes @da
+ * @da:         iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+        struct iovm_struct *area;
+
+        mutex_lock(&obj->mmap_lock);
+        area = __find_iovm_area(obj, da);
+        mutex_unlock(&obj->mmap_lock);
+
+        return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+                                           size_t bytes, u32 flags)
+{
+        struct iovm_struct *new, *tmp;
+        u32 start, prev_end, alignement;
+
+        if (!obj || !bytes)
+                return ERR_PTR(-EINVAL);
+
+        start = da;
+        alignement = PAGE_SIZE;
+
+        if (flags & IOVMF_DA_ANON) {
+                /*
+                 * Reserve the first page for NULL
+                 */
+                start = PAGE_SIZE;
+                if (flags & IOVMF_LINEAR)
+                        alignement = iopgsz_max(bytes);
+                start = roundup(start, alignement);
+        }
+
+        tmp = NULL;
+        if (list_empty(&obj->mmap))
+                goto found;
+
+        prev_end = 0;
+        list_for_each_entry(tmp, &obj->mmap, list) {
+
+                if ((prev_end <= start) && (start + bytes < tmp->da_start))
+                        goto found;
+
+                if (flags & IOVMF_DA_ANON)
+                        start = roundup(tmp->da_end, alignement);
+
+                prev_end = tmp->da_end;
+        }
+
+        if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+                goto found;
+
+        dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+                __func__, da, bytes, flags);
+
+        return ERR_PTR(-EINVAL);
+
+found:
+        new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+        if (!new)
+                return ERR_PTR(-ENOMEM);
+
+        new->iommu = obj;
+        new->da_start = start;
+        new->da_end = start + bytes;
+        new->flags = flags;
+
+        /*
+         * keep ascending order of iovmas
+         */
+        if (tmp)
+                list_add_tail(&new->list, &tmp->list);
+        else
+                list_add(&new->list, &obj->mmap);
+
+        dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+                __func__, new->da_start, start, new->da_end, bytes, flags);
+
+        return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+        size_t bytes;
+
+        BUG_ON(!obj || !area);
+
+        bytes = area->da_end - area->da_start;
+
+        dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+                __func__, area->da_start, area->da_end, bytes, area->flags);
+
+        list_del(&area->list);
+        kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj:        objective iommu
+ * @da:         iommu device virtual address
+ * @va:         mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+        void *va = NULL;
+        struct iovm_struct *area;
+
+        mutex_lock(&obj->mmap_lock);
+
+        area = __find_iovm_area(obj, da);
+        if (!area) {
+                dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+                goto out;
+        }
+        va = area->va;
+        mutex_unlock(&obj->mmap_lock);
+out:
+        return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+        unsigned int i;
+        struct scatterlist *sg;
+        void *va = _va;
+        void *va_end;
+
+        for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+                struct page *pg;
+                const size_t bytes = PAGE_SIZE;
+
+                /*
+                 * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+                 */
+                pg = vmalloc_to_page(va);
+                BUG_ON(!pg);
+                sg_set_page(sg, pg, bytes, 0);
+
+                va += bytes;
+        }
+
+        va_end = _va + PAGE_SIZE * i;
+        flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+        /*
+         * Actually this is not necessary at all, just exists for
+         * consistency of the code readibility.
+         */
+        BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+        unsigned int i;
+        struct scatterlist *sg;
+        void *va;
+
+        va = phys_to_virt(pa);
+
+        for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+                size_t bytes;
+
+                bytes = iopgsz_max(len);
+
+                BUG_ON(!iopgsz_ok(bytes));
+
+                sg_set_buf(sg, phys_to_virt(pa), bytes);
+                /*
+                 * 'pa' is cotinuous(linear).
+                 */
+                pa += bytes;
+                len -= bytes;
+        }
+        BUG_ON(len);
+
+        clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+        /*
+         * Actually this is not necessary at all, just exists for
+         * consistency of the code readibility
+         */
+        BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+                         const struct sg_table *sgt, u32 flags)
+{
+        int err;
+        unsigned int i, j;
+        struct scatterlist *sg;
+        u32 da = new->da_start;
+
+        if (!obj || !new || !sgt)
+                return -EINVAL;
+
+        BUG_ON(!sgtable_ok(sgt));
+
+        for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+                u32 pa;
+                int pgsz;
+                size_t bytes;
+                struct iotlb_entry e;
+
+                pa = sg_phys(sg);
+                bytes = sg_dma_len(sg);
+
+                flags &= ~IOVMF_PGSZ_MASK;
+                pgsz = bytes_to_iopgsz(bytes);
+                if (pgsz < 0)
+                        goto err_out;
+                flags |= pgsz;
+
+                pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+                         i, da, pa, bytes);
+
+                iotlb_init_entry(&e, da, pa, flags);
+                err = iopgtable_store_entry(obj, &e);
+                if (err)
+                        goto err_out;
+
+                da += bytes;
+        }
+        return 0;
+
+err_out:
+        da = new->da_start;
+
+        for_each_sg(sgt->sgl, sg, i, j) {
+                size_t bytes;
+
+                bytes = iopgtable_clear_entry(obj, da);
+
+                BUG_ON(!iopgsz_ok(bytes));
+
+                da += bytes;
+        }
+        return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+        u32 start;
+        size_t total = area->da_end - area->da_start;
+
+        BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+        start = area->da_start;
+        while (total > 0) {
+                size_t bytes;
+
+                bytes = iopgtable_clear_entry(obj, start);
+                if (bytes == 0)
+                        bytes = PAGE_SIZE;
+                else
+                        dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+                                __func__, start, bytes, area->flags);
+
+                BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+                total -= bytes;
+                start += bytes;
+        }
+        BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+                                      void (*fn)(const void *), u32 flags)
+{
+        struct sg_table *sgt = NULL;
+        struct iovm_struct *area;
+
+        if (!IS_ALIGNED(da, PAGE_SIZE)) {
+                dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+                return NULL;
+        }
+
+        mutex_lock(&obj->mmap_lock);
+
+        area = __find_iovm_area(obj, da);
+        if (!area) {
+                dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+                goto out;
+        }
+
+        if ((area->flags & flags) != flags) {
+                dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+                        area->flags);
+                goto out;
+        }
+        sgt = (struct sg_table *)area->sgt;
+
+        unmap_iovm_area(obj, area);
+
+        fn(area->va);
+
+        dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+                area->da_start, da, area->da_end,
+                area->da_end - area->da_start, area->flags);
+
+        free_iovm_area(obj, area);
+out:
+        mutex_unlock(&obj->mmap_lock);
+
+        return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+              const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+        int err = -ENOMEM;
+        struct iovm_struct *new;
+
+        mutex_lock(&obj->mmap_lock);
+
+        new = alloc_iovm_area(obj, da, bytes, flags);
+        if (IS_ERR(new)) {
+                err = PTR_ERR(new);
+                goto err_alloc_iovma;
+        }
+        new->va = va;
+        new->sgt = sgt;
+
+        if (map_iovm_area(obj, new, sgt, new->flags))
+                goto err_map;
+
+        mutex_unlock(&obj->mmap_lock);
+
+        dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+                __func__, new->da_start, bytes, new->flags, va);
+
+        return new->da_start;
+
+err_map:
+        free_iovm_area(obj, new);
+err_alloc_iovma:
+        mutex_unlock(&obj->mmap_lock);
+        return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+                 const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+        return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap  -  (d)-(p)-(v) address mapper
+ * @obj:        objective iommu
+ * @sgt:        address of scatter gather table
+ * @flags:      iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+                 u32 flags)
+{
+        size_t bytes;
+        void *va;
+
+        if (!obj || !obj->dev || !sgt)
+                return -EINVAL;
+
+        bytes = sgtable_len(sgt);
+        if (!bytes)
+                return -EINVAL;
+        bytes = PAGE_ALIGN(bytes);
+
+        va = vmap_sg(sgt);
+        if (IS_ERR(va))
+                return PTR_ERR(va);
+
+        flags &= IOVMF_HW_MASK;
+        flags |= IOVMF_DISCONT;
+        flags |= IOVMF_MMIO;
+        flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+        da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+        if (IS_ERR_VALUE(da))
+                vunmap_sg(va);
+
+        return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap  -  release virtual mapping obtained by 'iommu_vmap()'
+ * @obj:        objective iommu
+ * @da:         iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+        struct sg_table *sgt;
+        /*
+         * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+         * Just returns 'sgt' to the caller to free
+         */
+        sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+        if (!sgt)
+                dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+        return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:        objective iommu
+ * @da:         contiguous iommu virtual memory
+ * @bytes:      allocation size
+ * @flags:      iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+        void *va;
+        struct sg_table *sgt;
+
+        if (!obj || !obj->dev || !bytes)
+                return -EINVAL;
+
+        bytes = PAGE_ALIGN(bytes);
+
+        va = vmalloc(bytes);
+        if (!va)
+                return -ENOMEM;
+
+        sgt = sgtable_alloc(bytes, flags);
+        if (IS_ERR(sgt)) {
+                da = PTR_ERR(sgt);
+                goto err_sgt_alloc;
+        }
+        sgtable_fill_vmalloc(sgt, va);
+
+        flags &= IOVMF_HW_MASK;
+        flags |= IOVMF_DISCONT;
+        flags |= IOVMF_ALLOC;
+        flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+        da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+        if (IS_ERR_VALUE(da))
+                goto err_iommu_vmap;
+
+        return da;
+
+err_iommu_vmap:
+        sgtable_drain_vmalloc(sgt);
+        sgtable_free(sgt);
+err_sgt_alloc:
+        vfree(va);
+        return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree  -  release memory allocated by 'iommu_vmalloc()'
+ * @obj:        objective iommu
+ * @da:         iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+        struct sg_table *sgt;
+
+        sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+        if (!sgt)
+                dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+        sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+                          size_t bytes, u32 flags)
+{
+        struct sg_table *sgt;
+
+        sgt = sgtable_alloc(bytes, flags);
+        if (IS_ERR(sgt))
+                return PTR_ERR(sgt);
+
+        sgtable_fill_kmalloc(sgt, pa, bytes);
+
+        da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+        if (IS_ERR_VALUE(da)) {
+                sgtable_drain_kmalloc(sgt);
+                sgtable_free(sgt);
+        }
+
+        return da;
+}
+
+/**
+ * iommu_kmap  -  (d)-(p)-(v) address mapper
+ * @obj:        objective iommu
+ * @da:         contiguous iommu virtual memory
+ * @pa:         contiguous physical memory
+ * @flags:      iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+                 u32 flags)
+{
+        void *va;
+
+        if (!obj || !obj->dev || !bytes)
+                return -EINVAL;
+
+        bytes = PAGE_ALIGN(bytes);
+
+        va = ioremap(pa, bytes);
+        if (!va)
+                return -ENOMEM;
+
+        flags &= IOVMF_HW_MASK;
+        flags |= IOVMF_LINEAR;
+        flags |= IOVMF_MMIO;
+        flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+        da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+        if (IS_ERR_VALUE(da))
+                iounmap(va);
+
+        return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap  -  release virtual mapping obtained by 'iommu_kmap()'
+ * @obj:        objective iommu
+ * @da:         iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+        struct sg_table *sgt;
+        typedef void (*func_t)(const void *);
+
+        sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+                            IOVMF_LINEAR | IOVMF_MMIO);
+        if (!sgt)
+                dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+        sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:        objective iommu
+ * @da:         contiguous iommu virtual memory
+ * @bytes:      bytes for allocation
+ * @flags:      iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+        void *va;
+        u32 pa;
+
+        if (!obj || !obj->dev || !bytes)
+                return -EINVAL;
+
+        bytes = PAGE_ALIGN(bytes);
+
+        va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+        if (!va)
+                return -ENOMEM;
+        pa = virt_to_phys(va);
+
+        flags &= IOVMF_HW_MASK;
+        flags |= IOVMF_LINEAR;
+        flags |= IOVMF_ALLOC;
+        flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+        da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+        if (IS_ERR_VALUE(da))
+                kfree(va);
+
+        return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree  -  release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj:        objective iommu
+ * @da:         iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+        struct sg_table *sgt;
+
+        sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+        if (!sgt)
+                dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+        sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+        const unsigned long flags = SLAB_HWCACHE_ALIGN;
+        struct kmem_cache *p;
+
+        p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+                              flags, NULL);
+        if (!p)
+                return -ENOMEM;
+        iovm_area_cachep = p;
+
+        return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+        kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 5fab6470f4b2..26c93c75e62d 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO
 
           To compile this driver as a module, choose M here: the
           module will be called virtio-rng.  If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+        tristate "Freescale i.MX RNGA Random Number Generator"
+        depends on HW_RANDOM && ARCH_HAS_RNGA
+        ---help---
+          This driver provides kernel-side support for the Random Number
+          Generator hardware found on Freescale i.MX processors.
+
+          To compile this driver as a module, choose M here: the
+          module will be called mxc-rnga.
+
+          If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e81d21a5f28f..fd1ecd2f6731 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c
new file mode 100644
index 000000000000..187c6be80f43
--- /dev/null
+++ b/drivers/char/hw_random/mxc-rnga.c
@@ -0,0 +1,247 @@
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL                    0x00
+#define RNGA_STATUS                     0x04
+#define RNGA_ENTROPY                    0x08
+#define RNGA_OUTPUT_FIFO                0x0c
+#define RNGA_MODE                       0x10
+#define RNGA_VERIFICATION_CONTROL       0x14
+#define RNGA_OSC_CONTROL_COUNTER        0x18
+#define RNGA_OSC1_COUNTER               0x1c
+#define RNGA_OSC2_COUNTER               0x20
+#define RNGA_OSC_COUNTER_STATUS         0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE                  0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP              0x00000010
+#define RNGA_CONTROL_CLEAR_INT          0x00000008
+#define RNGA_CONTROL_MASK_INTS          0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE     0x00000002
+#define RNGA_CONTROL_GO                 0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK          0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD            0x80000000
+#define RNGA_STATUS_SLEEP               0x00000010
+#define RNGA_STATUS_ERROR_INT           0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW      0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS    0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION  0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+        int level;
+        void __iomem *rng_base = (void __iomem *)rng->priv;
+
+        /* how many random numbers is in FIFO? [0-16] */
+        level = ((__raw_readl(rng_base + RNGA_STATUS) &
+                        RNGA_STATUS_LEVEL_MASK) >> 8);
+
+        return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+        int err;
+        u32 ctrl;
+        void __iomem *rng_base = (void __iomem *)rng->priv;
+
+        /* retrieve a random number from FIFO */
+        *data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+        /* some error while reading this random number? */
+        err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+        /* if error: clear error interrupt, but doesn't return random number */
+        if (err) {
+                dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+                ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+                __raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+                                        rng_base + RNGA_CONTROL);
+                return 0;
+        } else
+                return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+        u32 ctrl, osc;
+        void __iomem *rng_base = (void __iomem *)rng->priv;
+
+        /* wake up */
+        ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+        __raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+        /* verify if oscillator is working */
+        osc = __raw_readl(rng_base + RNGA_STATUS);
+        if (osc & RNGA_STATUS_OSC_DEAD) {
+                dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+                return -ENODEV;
+        }
+
+        /* go running */
+        ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+        __raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+        return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+        u32 ctrl;
+        void __iomem *rng_base = (void __iomem *)rng->priv;
+
+        ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+        /* stop rnga */
+        __raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+        .name = "mxc-rnga",
+        .init = mxc_rnga_init,
+        .cleanup = mxc_rnga_cleanup,
+        .data_present = mxc_rnga_data_present,
+        .data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+        int err = -ENODEV;
+        struct clk *clk;
+        struct resource *res, *mem;
+        void __iomem *rng_base = NULL;
+
+        if (rng_dev)
+                return -EBUSY;
+
+        clk = clk_get(&pdev->dev, "rng");
+        if (IS_ERR(clk)) {
+                dev_err(&pdev->dev, "Could not get rng_clk!\n");
+                err = PTR_ERR(clk);
+                goto out;
+        }
+
+        clk_enable(clk);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                err = -ENOENT;
+                goto err_region;
+        }
+
+        mem = request_mem_region(res->start, resource_size(res), pdev->name);
+        if (mem == NULL) {
+                err = -EBUSY;
+                goto err_region;
+        }
+
+        rng_base = ioremap(res->start, resource_size(res));
+        if (!rng_base) {
+                err = -ENOMEM;
+                goto err_ioremap;
+        }
+
+        mxc_rnga.priv = (unsigned long)rng_base;
+
+        err = hwrng_register(&mxc_rnga);
+        if (err) {
+                dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+                goto err_register;
+        }
+
+        rng_dev = pdev;
+
+        dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+        return 0;
+
+err_register:
+        iounmap(rng_base);
+        rng_base = NULL;
+
+err_ioremap:
+        release_mem_region(res->start, resource_size(res));
+
+err_region:
+        clk_disable(clk);
+        clk_put(clk);
+
+out:
+        return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+        struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+        struct clk *clk = clk_get(&pdev->dev, "rng");
+
+        hwrng_unregister(&mxc_rnga);
+
+        iounmap(rng_base);
+
+        release_mem_region(res->start, resource_size(res));
+
+        clk_disable(clk);
+        clk_put(clk);
+
+        return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+        .driver = {
+                   .name = "mxc_rnga",
+                   .owner = THIS_MODULE,
+                   },
+        .remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+        return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+        platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d48da2fb013..57835f5715fc 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -758,10 +758,14 @@ config VIDEO_MX1
         ---help---
           This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
 
+config MX3_VIDEO
+        bool
+
 config VIDEO_MX3
         tristate "i.MX3x Camera Sensor Interface driver"
         depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
         select VIDEOBUF_DMA_CONTIG
+        select MX3_VIDEO
         ---help---
           This is a v4l2 driver for the i.MX3x Camera Sensor Interface
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691f3f64..3eb87bda14f3 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -155,7 +155,7 @@ config MMC_ATMELMCI_DMA
 
 config MMC_IMX
         tristate "Motorola i.MX Multimedia Card Interface support"
-        depends on ARCH_IMX
+        depends on ARCH_MX1
         help
           This selects the Motorola i.MX Multimedia card Interface.
           If you have a i.MX platform with a Multimedia Card slot,
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index a740053d3af3..b6d188115caf 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -456,7 +456,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
         debug_desc(phys, desc);
         BUG_ON(phys & 0x1F);
         qmgr_put_entry(queue, phys);
-        BUG_ON(qmgr_stat_overflow(queue));
+        /* Don't check for queue overflow here, we've allocated sufficient
+           length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -512,8 +513,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 #endif
                         napi_complete(napi);
                         qmgr_enable_irq(rxq);
-                        if (!qmgr_stat_empty(rxq) &&
-                            napi_reschedule(napi)) {
+                        if (!qmgr_stat_below_low_watermark(rxq) &&
+                            napi_reschedule(napi)) { /* not empty again */
 #if DEBUG_RX
                                 printk(KERN_DEBUG "%s: eth_poll"
                                        " napi_reschedule successed\n",
@@ -630,9 +631,9 @@ static void eth_txdone_irq(void *unused)
                         port->tx_buff_tab[n_desc] = NULL;
                 }
 
-                start = qmgr_stat_empty(port->plat->txreadyq);
+                start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
                 queue_put_desc(port->plat->txreadyq, phys, desc);
-                if (start) {
+                if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
                         printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
                                port->netdev->name);
@@ -708,13 +709,14 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
         queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
         dev->trans_start = jiffies;
 
-        if (qmgr_stat_empty(txreadyq)) {
+        if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
                 printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
 #endif
                 netif_stop_queue(dev);
                 /* we could miss TX ready interrupt */
-                if (!qmgr_stat_empty(txreadyq)) {
+                /* really empty in fact */
+                if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
                         printk(KERN_DEBUG "%s: eth_xmit ready again\n",
                                dev->name);
@@ -814,29 +816,29 @@ static int request_queues(struct port *port)
         int err;
 
         err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
-                            "%s:RX-free", port->netdev->name);
+                                 "%s:RX-free", port->netdev->name);
         if (err)
                 return err;
 
         err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
-                            "%s:RX", port->netdev->name);
+                                 "%s:RX", port->netdev->name);
         if (err)
                 goto rel_rxfree;
 
         err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
-                            "%s:TX", port->netdev->name);
+                                 "%s:TX", port->netdev->name);
         if (err)
                 goto rel_rx;
 
         err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
-                            "%s:TX-ready", port->netdev->name);
+                                 "%s:TX-ready", port->netdev->name);
         if (err)
                 goto rel_tx;
 
         /* TX-done queue handles skbs sent out by the NPEs */
         if (!ports_open) {
                 err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
-                                    "%s:TX-done", DRV_NAME);
+                                         "%s:TX-done", DRV_NAME);
                 if (err)
                         goto rel_txready;
         }
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 765a7f5d6aa4..a6dc317083d3 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -579,7 +579,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
         debug_desc(phys, desc);
         BUG_ON(phys & 0x1F);
         qmgr_put_entry(queue, phys);
-        BUG_ON(qmgr_stat_overflow(queue));
+        /* Don't check for queue overflow here, we've allocated sufficient
+           length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -789,10 +790,10 @@ static void hss_hdlc_txdone_irq(void *pdev)
                 free_buffer_irq(port->tx_buff_tab[n_desc]);
                 port->tx_buff_tab[n_desc] = NULL;
 
-                start = qmgr_stat_empty(port->plat->txreadyq);
+                start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
                 queue_put_desc(port->plat->txreadyq,
                                tx_desc_phys(port, n_desc), desc);
-                if (start) {
+                if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
                         printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
                                " ready\n", dev->name);
@@ -867,13 +868,13 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
         queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
         dev->trans_start = jiffies;
 
-        if (qmgr_stat_empty(txreadyq)) {
+        if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
                 printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
 #endif
                 netif_stop_queue(dev);
                 /* we could miss TX ready interrupt */
-                if (!qmgr_stat_empty(txreadyq)) {
+                if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
                         printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
                                dev->name);
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index f7a3283dd029..551332e4ed02 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,32 +12,56 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA                 0x000
+#define EP93XX_RTC_MATCH                0x004
+#define EP93XX_RTC_STATUS               0x008
+#define  EP93XX_RTC_STATUS_INTR          (1<<0)
+#define EP93XX_RTC_LOAD                 0x00C
+#define EP93XX_RTC_CONTROL              0x010
+#define  EP93XX_RTC_CONTROL_MIE          (1<<0)
+#define EP93XX_RTC_SWCOMP               0x108
+#define  EP93XX_RTC_SWCOMP_DEL_MASK      0x001f0000
+#define  EP93XX_RTC_SWCOMP_DEL_SHIFT     16
+#define  EP93XX_RTC_SWCOMP_INT_MASK      0x0000ffff
+#define  EP93XX_RTC_SWCOMP_INT_SHIFT     0
+
+#define DRV_VERSION "0.3"
 
-#define EP93XX_RTC_REG(x)       (EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA         EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD         EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP       EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+        void __iomem    *mmio_base;
+};
 
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
                                 unsigned short *delete)
 {
-        unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+        struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+        unsigned long comp;
+
+        comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
 
         if (preload)
-                *preload = comp & 0xffff;
+                *preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+                                >> EP93XX_RTC_SWCOMP_INT_SHIFT;
 
         if (delete)
-                *delete = (comp >> 16) & 0x1f;
+                *delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+                                >> EP93XX_RTC_SWCOMP_DEL_SHIFT;
 
         return 0;
 }
 
 static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-        unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+        struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+        unsigned long time;
+
+         time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
 
         rtc_time_to_tm(time, tm);
         return 0;
@@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
 {
-        __raw_writel(secs + 1, EP93XX_RTC_LOAD);
+        struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+        __raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
         return 0;
 }
 
@@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
 {
         unsigned short preload, delete;
 
-        ep93xx_get_swcomp(dev, &preload, &delete);
+        ep93xx_rtc_get_swcomp(dev, &preload, &delete);
 
         seq_printf(seq, "preload\t\t: %d\n", preload);
         seq_printf(seq, "delete\t\t: %d\n", delete);
@@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = {
         .proc           = ep93xx_rtc_proc,
 };
 
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
                         struct device_attribute *attr, char *buf)
 {
         unsigned short preload;
 
-        ep93xx_get_swcomp(dev, &preload, NULL);
+        ep93xx_rtc_get_swcomp(dev, &preload, NULL);
 
         return sprintf(buf, "%d\n", preload);
 }
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
 
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
                         struct device_attribute *attr, char *buf)
 {
         unsigned short delete;
 
-        ep93xx_get_swcomp(dev, NULL, &delete);
+        ep93xx_rtc_get_swcomp(dev, NULL, &delete);
 
         return sprintf(buf, "%d\n", delete);
 }
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
 
 
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 {
-        struct rtc_device *rtc = rtc_device_register("ep93xx",
-                                &dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+        struct ep93xx_rtc *ep93xx_rtc;
+        struct resource *res;
+        struct rtc_device *rtc;
+        int err;
+
+        ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+        if (ep93xx_rtc == NULL)
+                return -ENOMEM;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res == NULL)
+                return -ENXIO;
+
+        res = request_mem_region(res->start, resource_size(res), pdev->name);
+        if (res == NULL)
+                return -EBUSY;
+
+        ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+        if (ep93xx_rtc->mmio_base == NULL) {
+                err = -ENXIO;
+                goto fail;
+        }
 
+        pdev->dev.platform_data = ep93xx_rtc;
+
+        rtc = rtc_device_register(pdev->name,
+                                &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
         if (IS_ERR(rtc)) {
-                return PTR_ERR(rtc);
+                err = PTR_ERR(rtc);
+                goto fail;
         }
 
-        platform_set_drvdata(dev, rtc);
+        platform_set_drvdata(pdev, rtc);
 
-        device_create_file(&dev->dev, &dev_attr_comp_preload);
-        device_create_file(&dev->dev, &dev_attr_comp_delete);
+        err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+        if (err)
+                goto fail;
+        err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+        if (err) {
+                device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+                goto fail;
+        }
 
         return 0;
+
+fail:
+        if (ep93xx_rtc->mmio_base) {
+                iounmap(ep93xx_rtc->mmio_base);
+                pdev->dev.platform_data = NULL;
+        }
+        release_mem_region(res->start, resource_size(res));
+        return err;
 }
 
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
 {
-        struct rtc_device *rtc = platform_get_drvdata(dev);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+        struct resource *res;
+
+        /* cleanup sysfs */
+        device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+        device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+        rtc_device_unregister(rtc);
+
+        iounmap(ep93xx_rtc->mmio_base);
+        pdev->dev.platform_data = NULL;
 
-        if (rtc)
-                rtc_device_unregister(rtc);
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        release_mem_region(res->start, resource_size(res));
 
-        platform_set_drvdata(dev, NULL);
+        platform_set_drvdata(pdev, NULL);
 
         return 0;
 }
@@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ep93xx-rtc");
 
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
         .driver         = {
                 .name   = "ep93xx-rtc",
                 .owner  = THIS_MODULE,
         },
-        .probe          = ep93xx_rtc_probe,
-        .remove         = __devexit_p(ep93xx_rtc_remove),
+        .remove         = __exit_p(ep93xx_rtc_remove),
 };
 
 static int __init ep93xx_rtc_init(void)
 {
-        return platform_driver_register(&ep93xx_rtc_platform_driver);
+        return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
 }
 
 static void __exit ep93xx_rtc_exit(void)
 {
-        platform_driver_unregister(&ep93xx_rtc_platform_driver);
+        platform_driver_unregister(&ep93xx_rtc_driver);
 }
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b175c50..3f5d5a200481 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
 #define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)  /* Send break */
 #define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -127,7 +127,7 @@
 #define  UCR3_RXDSEN     (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN     (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define  UCR3_REF25      (1<<3)  /* Ref freq 25 MHz, only on mx1 */
 #define  UCR3_REF30      (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
 #endif
@@ -180,13 +180,6 @@
 #define  UTS_SOFTRST     (1<<0)  /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR        204
-#define MINOR_START             41
-#define DEV_NAME                "ttySMX"
-#define MAX_INTERNAL_IRQ        IMX_IRQS
-#endif
-
 #ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START             16
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d52961..7c61251bea61 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
 
 config SPI_IMX
         tristate "Freescale iMX SPI controller"
-        depends on ARCH_IMX && EXPERIMENTAL
+        depends on ARCH_MX1 && EXPERIMENTAL
         help
           This enables using the Freescale iMX SPI controller in master
           mode.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0048f1185a60..8083d862ebc5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
 
 config FB_IMX
         tristate "Motorola i.MX LCD support"
-        depends on FB && (ARCH_IMX || ARCH_MX2)
+        depends on FB && (ARCH_MX1 || ARCH_MX2)
         select FB_CFB_FILLRECT
         select FB_CFB_COPYAREA
         select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 9894de1c9b9f..b7af5256e887 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg)
         dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
 
         /* We only need one interrupt, it will be re-enabled as needed */
-        disable_irq(ichannel->eof_irq);
+        disable_irq_nosync(ichannel->eof_irq);
 
         complete(&mx3_fbi->flip_cmpl);
 }
@@ -1366,7 +1366,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 
         mx3fb_blank(FB_BLANK_UNBLANK, fbi);
 
-        dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+        dev_info(dev, "registered, using mode %s\n", fb_mode);
 
         ret = register_framebuffer(fbi);
         if (ret < 0)