diff options
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-robotfuzz-osif.c | 202 |
3 files changed, 213 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 98a3f1ffc3b7..6bcdea5856af 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig | |||
| @@ -874,6 +874,16 @@ config I2C_PARPORT_LIGHT | |||
| 874 | This support is also available as a module. If so, the module | 874 | This support is also available as a module. If so, the module |
| 875 | will be called i2c-parport-light. | 875 | will be called i2c-parport-light. |
| 876 | 876 | ||
| 877 | config I2C_ROBOTFUZZ_OSIF | ||
| 878 | tristate "RobotFuzz Open Source InterFace USB adapter" | ||
| 879 | depends on USB | ||
| 880 | help | ||
| 881 | If you say yes to this option, support will be included for the | ||
| 882 | RobotFuzz Open Source InterFace USB to I2C interface. | ||
| 883 | |||
| 884 | This driver can also be built as a module. If so, the module | ||
| 885 | will be called i2c-osif. | ||
| 886 | |||
| 877 | config I2C_TAOS_EVM | 887 | config I2C_TAOS_EVM |
| 878 | tristate "TAOS evaluation module" | 888 | tristate "TAOS evaluation module" |
| 879 | depends on TTY | 889 | depends on TTY |
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index dca041b1b99d..a08931fe73e1 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile | |||
| @@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o | |||
| 84 | obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o | 84 | obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o |
| 85 | obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o | 85 | obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o |
| 86 | obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o | 86 | obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o |
| 87 | obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o | ||
| 87 | obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o | 88 | obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o |
| 88 | obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o | 89 | obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o |
| 89 | obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o | 90 | obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o |
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c new file mode 100644 index 000000000000..ced9c6a308d1 --- /dev/null +++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c | |||
| @@ -0,0 +1,202 @@ | |||
| 1 | /* | ||
| 2 | * Driver for RobotFuzz OSIF | ||
| 3 | * | ||
| 4 | * Copyright (c) 2013 Andrew Lunn <andrew@lunn.ch> | ||
| 5 | * Copyright (c) 2007 Barry Carter <Barry.Carter@robotfuzz.com> | ||
| 6 | * | ||
| 7 | * Based on the i2c-tiny-usb by | ||
| 8 | * | ||
| 9 | * Copyright (C) 2006 Til Harbaum (Till@Harbaum.org) | ||
| 10 | * | ||
| 11 | * This program is free software; you can redistribute it and/or | ||
| 12 | * modify it under the terms of the GNU General Public License as | ||
| 13 | * published by the Free Software Foundation, version 2. | ||
| 14 | */ | ||
| 15 | |||
| 16 | #include <linux/kernel.h> | ||
| 17 | #include <linux/module.h> | ||
| 18 | #include <linux/errno.h> | ||
| 19 | #include <linux/i2c.h> | ||
| 20 | #include <linux/slab.h> | ||
| 21 | #include <linux/usb.h> | ||
| 22 | |||
| 23 | #define OSIFI2C_READ 20 | ||
| 24 | #define OSIFI2C_WRITE 21 | ||
| 25 | #define OSIFI2C_STOP 22 | ||
| 26 | #define OSIFI2C_STATUS 23 | ||
| 27 | #define OSIFI2C_SET_BIT_RATE 24 | ||
| 28 | |||
| 29 | #define STATUS_ADDRESS_ACK 0 | ||
| 30 | #define STATUS_ADDRESS_NAK 2 | ||
| 31 | |||
| 32 | struct osif_priv { | ||
| 33 | struct usb_device *usb_dev; | ||
| 34 | struct usb_interface *interface; | ||
| 35 | struct i2c_adapter adapter; | ||
| 36 | unsigned char status; | ||
| 37 | }; | ||
| 38 | |||
| 39 | static int osif_usb_read(struct i2c_adapter *adapter, int cmd, | ||
| 40 | int value, int index, void *data, int len) | ||
| 41 | { | ||
| 42 | struct osif_priv *priv = adapter->algo_data; | ||
| 43 | |||
| 44 | return usb_control_msg(priv->usb_dev, usb_rcvctrlpipe(priv->usb_dev, 0), | ||
| 45 | cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | | ||
| 46 | USB_DIR_IN, value, index, data, len, 2000); | ||
| 47 | } | ||
| 48 | |||
| 49 | static int osif_usb_write(struct i2c_adapter *adapter, int cmd, | ||
| 50 | int value, int index, void *data, int len) | ||
| 51 | { | ||
| 52 | |||
| 53 | struct osif_priv *priv = adapter->algo_data; | ||
| 54 | |||
| 55 | return usb_control_msg(priv->usb_dev, usb_sndctrlpipe(priv->usb_dev, 0), | ||
| 56 | cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE, | ||
| 57 | value, index, data, len, 2000); | ||
| 58 | } | ||
| 59 | |||
| 60 | static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, | ||
| 61 | int num) | ||
| 62 | { | ||
| 63 | struct osif_priv *priv = adapter->algo_data; | ||
| 64 | struct i2c_msg *pmsg; | ||
| 65 | int ret = 0; | ||
| 66 | int i, cmd; | ||
| 67 | |||
| 68 | for (i = 0; ret >= 0 && i < num; i++) { | ||
| 69 | pmsg = &msgs[i]; | ||
| 70 | |||
| 71 | if (pmsg->flags & I2C_M_RD) { | ||
| 72 | cmd = OSIFI2C_READ; | ||
| 73 | |||
| 74 | ret = osif_usb_read(adapter, cmd, pmsg->flags, | ||
| 75 | pmsg->addr, pmsg->buf, | ||
| 76 | pmsg->len); | ||
| 77 | if (ret != pmsg->len) { | ||
| 78 | dev_err(&adapter->dev, "failure reading data\n"); | ||
| 79 | return -EREMOTEIO; | ||
| 80 | } | ||
| 81 | } else { | ||
| 82 | cmd = OSIFI2C_WRITE; | ||
| 83 | |||
| 84 | ret = osif_usb_write(adapter, cmd, pmsg->flags, | ||
| 85 | pmsg->addr, pmsg->buf, pmsg->len); | ||
| 86 | if (ret != pmsg->len) { | ||
| 87 | dev_err(&adapter->dev, "failure writing data\n"); | ||
| 88 | return -EREMOTEIO; | ||
| 89 | } | ||
| 90 | } | ||
| 91 | |||
| 92 | ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0); | ||
| 93 | if (ret) { | ||
| 94 | dev_err(&adapter->dev, "failure sending STOP\n"); | ||
| 95 | return -EREMOTEIO; | ||
| 96 | } | ||
| 97 | |||
| 98 | /* read status */ | ||
| 99 | ret = osif_usb_read(adapter, OSIFI2C_STATUS, 0, 0, | ||
| 100 | &priv->status, 1); | ||
| 101 | if (ret != 1) { | ||
| 102 | dev_err(&adapter->dev, "failure reading status\n"); | ||
| 103 | return -EREMOTEIO; | ||
| 104 | } | ||
| 105 | |||
| 106 | if (priv->status != STATUS_ADDRESS_ACK) { | ||
| 107 | dev_dbg(&adapter->dev, "status = %d\n", priv->status); | ||
| 108 | return -EREMOTEIO; | ||
| 109 | } | ||
| 110 | } | ||
| 111 | |||
| 112 | return i; | ||
| 113 | } | ||
| 114 | |||
| 115 | static u32 osif_func(struct i2c_adapter *adapter) | ||
| 116 | { | ||
| 117 | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | ||
| 118 | } | ||
| 119 | |||
| 120 | static struct i2c_algorithm osif_algorithm = { | ||
| 121 | .master_xfer = osif_xfer, | ||
| 122 | .functionality = osif_func, | ||
| 123 | }; | ||
| 124 | |||
| 125 | #define USB_OSIF_VENDOR_ID 0x1964 | ||
| 126 | #define USB_OSIF_PRODUCT_ID 0x0001 | ||
| 127 | |||
| 128 | static struct usb_device_id osif_table[] = { | ||
| 129 | { USB_DEVICE(USB_OSIF_VENDOR_ID, USB_OSIF_PRODUCT_ID) }, | ||
| 130 | { } | ||
| 131 | }; | ||
| 132 | MODULE_DEVICE_TABLE(usb, osif_table); | ||
| 133 | |||
| 134 | static int osif_probe(struct usb_interface *interface, | ||
| 135 | const struct usb_device_id *id) | ||
| 136 | { | ||
| 137 | int ret; | ||
| 138 | struct osif_priv *priv; | ||
| 139 | u16 version; | ||
| 140 | |||
| 141 | priv = devm_kzalloc(&interface->dev, sizeof(*priv), GFP_KERNEL); | ||
| 142 | if (!priv) | ||
| 143 | return -ENOMEM; | ||
| 144 | |||
| 145 | priv->usb_dev = usb_get_dev(interface_to_usbdev(interface)); | ||
| 146 | priv->interface = interface; | ||
| 147 | |||
| 148 | usb_set_intfdata(interface, priv); | ||
| 149 | |||
| 150 | priv->adapter.owner = THIS_MODULE; | ||
| 151 | priv->adapter.class = I2C_CLASS_HWMON; | ||
| 152 | priv->adapter.algo = &osif_algorithm; | ||
| 153 | priv->adapter.algo_data = priv; | ||
| 154 | snprintf(priv->adapter.name, sizeof(priv->adapter.name), | ||
| 155 | "OSIF at bus %03d device %03d", | ||
| 156 | priv->usb_dev->bus->busnum, priv->usb_dev->devnum); | ||
| 157 | |||
| 158 | /* | ||
| 159 | * Set bus frequency. The frequency is: | ||
| 160 | * 120,000,000 / ( 16 + 2 * div * 4^prescale). | ||
| 161 | * Using dev = 52, prescale = 0 give 100KHz */ | ||
| 162 | ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0, | ||
| 163 | NULL, 0); | ||
| 164 | if (ret) { | ||
| 165 | dev_err(&interface->dev, "failure sending bit rate"); | ||
| 166 | usb_put_dev(priv->usb_dev); | ||
| 167 | return ret; | ||
| 168 | } | ||
| 169 | |||
| 170 | i2c_add_adapter(&(priv->adapter)); | ||
| 171 | |||
| 172 | version = le16_to_cpu(priv->usb_dev->descriptor.bcdDevice); | ||
| 173 | dev_info(&interface->dev, | ||
| 174 | "version %x.%02x found at bus %03d address %03d", | ||
| 175 | version >> 8, version & 0xff, | ||
| 176 | priv->usb_dev->bus->busnum, priv->usb_dev->devnum); | ||
| 177 | |||
| 178 | return 0; | ||
| 179 | } | ||
| 180 | |||
| 181 | static void osif_disconnect(struct usb_interface *interface) | ||
| 182 | { | ||
| 183 | struct osif_priv *priv = usb_get_intfdata(interface); | ||
| 184 | |||
| 185 | i2c_del_adapter(&(priv->adapter)); | ||
| 186 | usb_set_intfdata(interface, NULL); | ||
| 187 | usb_put_dev(priv->usb_dev); | ||
| 188 | } | ||
| 189 | |||
| 190 | static struct usb_driver osif_driver = { | ||
| 191 | .name = "RobotFuzz Open Source InterFace, OSIF", | ||
| 192 | .probe = osif_probe, | ||
| 193 | .disconnect = osif_disconnect, | ||
| 194 | .id_table = osif_table, | ||
| 195 | }; | ||
| 196 | |||
| 197 | module_usb_driver(osif_driver); | ||
| 198 | |||
| 199 | MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); | ||
| 200 | MODULE_AUTHOR("Barry Carter <barry.carter@robotfuzz.com>"); | ||
| 201 | MODULE_DESCRIPTION("RobotFuzz OSIF driver"); | ||
| 202 | MODULE_LICENSE("GPL v2"); | ||
