169 files changed, 6348 insertions, 8838 deletions

diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index b138b663bf54..0c430150d929 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -17,3 +17,12 @@ Description:
                  device, like 'tty1'.
                  The file supports poll() to detect virtual
                  console switches.
+
+What:           /sys/class/tty/ttyS0/uartclk
+Date:           Sep 2012
+Contact:        Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+                 Shows the current uartclk value associated with the
+                 UART port in serial_core, that is bound to TTY like ttyS0.
+                 uartclk = 16 * baud_base
+
diff --git a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt
new file mode 100644
index 000000000000..0d439dfc1aa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt
@@ -0,0 +1,14 @@
+* NXP LPC32xx SoC High Speed UART
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-hsuart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Example:
+
+        uart1: serial@40014000 {
+                compatible = "nxp,lpc3220-hsuart";
+                reg = <0x40014000 0x1000>;
+                interrupts = <26 0>;
+        };
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 0847fdeee11a..ba385f2e0ddc 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -25,6 +25,8 @@ Optional properties:
   accesses to the UART (e.g. TI davinci).
 - used-by-rtas : set to indicate that the port is in use by the OpenFirmware
   RTAS and should not be registered.
+- no-loopback-test: set to indicate that the port does not implements loopback
+  test mode
 
 Example:
 
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index e09468ad3cb1..f7b0c7dc25ef 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -2,8 +2,6 @@
         - this file.
 README.cycladesZ
         - info on Cyclades-Z firmware loading.
-computone.txt
-        - info on Computone Intelliport II/Plus Multiport Serial Driver.
 digiepca.txt
         - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
 hayes-esp.txt
diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt
deleted file mode 100644
index a6a1158ea2ba..000000000000
--- a/Documentation/serial/computone.txt
+++ /dev/null
@@ -1,520 +0,0 @@
-NOTE: This is an unmaintained driver.  It is not guaranteed to work due to
-changes made in the tty layer in 2.6.  If you wish to take over maintenance of
-this driver, contact Michael Warfield <mhw@wittsend.com>.
-
-Changelog:
-----------
-11-01-2001:     Original Document
-
-10-29-2004:     Minor misspelling & format fix, update status of driver.
-                James Nelson <james4765@gmail.com>
-
-Computone Intelliport II/Plus Multiport Serial Driver
------------------------------------------------------
-
-Release Notes For Linux Kernel 2.2 and higher.
-These notes are for the drivers which have already been integrated into the
-kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4.
-
-Version: 1.2.14
-Date: 11/01/2001
-Historical Author: Andrew Manison <amanison@america.net>
-Primary Author: Doug McNash
-
-This file assumes that you are using the Computone drivers which are
-integrated into the kernel sources.  For updating the drivers or installing
-drivers into kernels which do not already have Computone drivers, please
-refer to the instructions in the README.computone file in the driver patch.
-
-
-1. INTRODUCTION
-
-This driver supports the entire family of Intelliport II/Plus controllers
-with the exception of the MicroChannel controllers.  It does not support
-products previous to the Intelliport II.
-
-This driver was developed on the v2.0.x Linux tree and has been tested up
-to v2.4.14; it will probably not work with earlier v1.X kernels,.
-
-
-2. QUICK INSTALLATION
-
-Hardware - If you have an ISA card, find a free interrupt and io port. 
-                   List those in use with `cat /proc/interrupts` and 
-                   `cat /proc/ioports`.  Set the card dip switches to a free 
-                   address.  You may need to configure your BIOS to reserve an
-                   irq for an ISA card.  PCI and EISA parameters are set
-                   automagically.  Insert card into computer with the power off 
-                   before or after drivers installation.
-
-        Note the hardware address from the Computone ISA cards installed into
-                the system.  These are required for editing ip2.c or editing
-                /etc/modprobe.d/*.conf, or for specification on the modprobe
-                command line.
-
-        Note that the /etc/modules.conf should be used for older (pre-2.6)
-                kernels.
-
-Software -
-
-Module installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
-   Select (m) module for CONFIG_COMPUTONE under character
-   devices.  CONFIG_PCI and CONFIG_MODULES also may need to be set.
-c) Set address on ISA cards then:
-   edit /usr/src/linux/drivers/char/ip2.c if needed 
-        or
-   edit config file in  /etc/modprobe.d/ if needed (module).
-        or both to match this setting.
-d) Run "make modules"
-e) Run "make modules_install"
-f) Run "/sbin/depmod -a"
-g) install driver using `modprobe ip2 <options>` (options listed below)
-h) run ip2mkdev (either the script below or the binary version)
-
-
-Kernel installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
-   Select (y) kernel for CONFIG_COMPUTONE under character
-   devices.  CONFIG_PCI may need to be set if you have PCI bus.
-c) Set address on ISA cards then:
-           edit /usr/src/linux/drivers/char/ip2.c  
-           (Optional - may be specified on kernel command line now)
-d) Run "make zImage" or whatever target you prefer.
-e) mv /usr/src/linux/arch/x86/boot/zImage to /boot.
-f) Add new config for this kernel into /etc/lilo.conf, run "lilo"
-        or copy to a floppy disk and boot from that floppy disk.
-g) Reboot using this kernel
-h) run ip2mkdev (either the script below or the binary version)
-
-Kernel command line options:
-
-When compiling the driver into the kernel, io and irq may be
-compiled into the driver by editing ip2.c and setting the values for
-io and irq in the appropriate array.  An alternative is to specify
-a command line parameter to the kernel at boot up.
-
-        ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
-
-Note that this order is very different from the specifications for the
-modload parameters which have separate IRQ and IO specifiers.
-
-The io port also selects PCI (1) and EISA (2) boards.
-
-        io=0    No board
-        io=1    PCI board
-        io=2    EISA board
-        else    ISA board io address
-
-You only need to specify the boards which are present.
-
-        Examples:
-
-                2 PCI boards:
-
-                        ip2=1,0,1,0
-
-                1 ISA board at 0x310 irq 5:
-
-                        ip2=0x310,5
-
-This can be added to and "append" option in lilo.conf similar to this:
-
-        append="ip2=1,0,1,0"
-
-
-3. INSTALLATION
-
-Previously, the driver sources were packaged with a set of patch files
-to update the character drivers' makefile and configuration file, and other 
-kernel source files. A build script (ip2build) was included which applies 
-the patches if needed, and build any utilities needed.
-What you receive may be a single patch file in conventional kernel
-patch format build script. That form can also be applied by
-running patch -p1 < ThePatchFile.  Otherwise run ip2build.
- 
-The driver can be installed as a module (recommended) or built into the 
-kernel. This is selected as for other drivers through the `make config`
-command from the root of the Linux source tree. If the driver is built 
-into the kernel you will need to edit the file ip2.c to match the boards 
-you are installing. See that file for instructions. If the driver is 
-installed as a module the configuration can also be specified on the
-modprobe command line as follows:
-
-        modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4
-
-where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11,
-12,15) and addr1-4 are the base addresses for up to four controllers. If 
-the irqs are not specified the driver uses the default in ip2.c (which 
-selects polled mode). If no base addresses are specified the defaults in 
-ip2.c are used. If you are autoloading the driver module with kerneld or
-kmod the base addresses and interrupt number must also be set in ip2.c
-and recompile or just insert and options line in /etc/modprobe.d/*.conf or both.
-The options line is equivalent to the command line and takes precedence over
-what is in ip2.c. 
-
-config sample to put /etc/modprobe.d/*.conf:
-        options ip2 io=1,0x328 irq=1,10
-        alias char-major-71 ip2
-        alias char-major-72 ip2
-        alias char-major-73 ip2
-
-The equivalent in ip2.c:
-
-static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 };
-static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; 
-
-The equivalent for the kernel command line (in lilo.conf):
-
-        append="ip2=1,1,0x328,10"
-
-
-Note:   Both io and irq should be updated to reflect YOUR system.  An "io"
-        address of 1 or 2 indicates a PCI or EISA card in the board table.
-        The PCI or EISA irq will be assigned automatically.
-
-Specifying an invalid or in-use irq will default the driver into
-running in polled mode for that card.  If all irq entries are 0 then
-all cards will operate in polled mode.
-
-If you select the driver as part of the kernel run :
-
-        make zlilo (or whatever you do to create a bootable kernel)
-
-If you selected a module run :
-
-        make modules && make modules_install
-
-The utility ip2mkdev (see 5 and 7 below) creates all the device nodes
-required by the driver.  For a device to be created it must be configured
-in the driver and the board must be installed. Only devices corresponding
-to real IntelliPort II ports are created. With multiple boards and expansion
-boxes this will leave gaps in the sequence of device names. ip2mkdev uses
-Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and
-cuf0 - cuf255 for callout devices.
-
-
-4. USING THE DRIVERS
-
-As noted above, the driver implements the ports in accordance with Linux
-conventions, and the devices should be interchangeable with the standard
-serial devices. (This is a key point for problem reporting: please make
-sure that what you are trying do works on the ttySx/cuax ports first; then 
-tell us what went wrong with the ip2 ports!)
-
-Higher speeds can be obtained using the setserial utility which remaps 
-38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. 
-Intelliport II installations using the PowerPort expansion module can
-use the custom speed setting to select the highest speeds: 153,600 bps,
-230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for
-custom baud rate configuration is fixed at 921,600 for cards/expansion
-modules with ST654's and 115200 for those with Cirrus CD1400's.  This
-corresponds to the maximum bit rates those chips are capable.  
-For example if the baud base is 921600 and the baud divisor is 18 then
-the custom rate is 921600/18 = 51200 bps.  See the setserial man page for
-complete details. Of course if stty accepts the higher rates now you can
-use that as well as the standard ioctls().
-
-
-5. ip2mkdev and assorted utilities...
-
-Several utilities, including the source for a binary ip2mkdev utility are
-available under .../drivers/char/ip2.  These can be build by changing to
-that directory and typing "make" after the kernel has be built.  If you do
-not wish to compile the binary utilities, the shell script below can be
-cut out and run as "ip2mkdev" to create the necessary device files.  To
-use the ip2mkdev script, you must have procfs enabled and the proc file
-system mounted on /proc.
-
-
-6. NOTES
-
-This is a release version of the driver, but it is impossible to test it
-in all configurations of Linux. If there is any anomalous behaviour that 
-does not match the standard serial port's behaviour please let us know.
-
-
-7. ip2mkdev shell script
-
-Previously, this script was simply attached here.  It is now attached as a
-shar archive to make it easier to extract the script from the documentation.
-To create the ip2mkdev shell script change to a convenient directory (/tmp
-works just fine) and run the following command:
-
-        unshar Documentation/serial/computone.txt
-                (This file)
-
-You should now have a file ip2mkdev in your current working directory with
-permissions set to execute.  Running that script with then create the
-necessary devices for the Computone boards, interfaces, and ports which
-are present on you system at the time it is run.
-
-
-#!/bin/sh
-# This is a shell archive (produced by GNU sharutils 4.2.1).
-# To extract the files from this archive, save it to some FILE, remove
-# everything before the `!/bin/sh' line above, then type `sh FILE'.
-#
-# Made on 2001-10-29 10:32 EST by <mhw@alcove.wittsend.com>.
-# Source directory was `/home2/src/tmp'.
-#
-# Existing files will *not* be overwritten unless `-c' is specified.
-#
-# This shar contains:
-# length mode       name
-# ------ ---------- ------------------------------------------
-#   4251 -rwxr-xr-x ip2mkdev
-#
-save_IFS="${IFS}"
-IFS="${IFS}:"
-gettext_dir=FAILED
-locale_dir=FAILED
-first_param="$1"
-for dir in $PATH
-do
-  if test "$gettext_dir" = FAILED && test -f $dir/gettext \
-     && ($dir/gettext --version >/dev/null 2>&1)
-  then
-    set `$dir/gettext --version 2>&1`
-    if test "$3" = GNU
-    then
-      gettext_dir=$dir
-    fi
-  fi
-  if test "$locale_dir" = FAILED && test -f $dir/shar \
-     && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
-  then
-    locale_dir=`$dir/shar --print-text-domain-dir`
-  fi
-done
-IFS="$save_IFS"
-if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
-then
-  echo=echo
-else
-  TEXTDOMAINDIR=$locale_dir
-  export TEXTDOMAINDIR
-  TEXTDOMAIN=sharutils
-  export TEXTDOMAIN
-  echo="$gettext_dir/gettext -s"
-fi
-if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then
-  shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
-elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then
-  shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
-elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then
-  shar_touch='touch -am $3$4$5$6$2 "$8"'
-else
-  shar_touch=:
-  echo
-  $echo 'WARNING: not restoring timestamps.  Consider getting and'
-  $echo "installing GNU \`touch', distributed in GNU File Utilities..."
-  echo
-fi
-rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch
-#
-if mkdir _sh17581; then
-  $echo 'x -' 'creating lock directory'
-else
-  $echo 'failed to create lock directory'
-  exit 1
-fi
-# ============= ip2mkdev ==============
-if test -f 'ip2mkdev' && test "$first_param" != -c; then
-  $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)'
-else
-  $echo 'x -' extracting 'ip2mkdev' '(text)'
-  sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' &&
-#!/bin/sh -
-#
-#       ip2mkdev
-#
-#       Make or remove devices as needed for Computone Intelliport drivers
-#
-#       First rule!  If the dev file exists and you need it, don't mess
-#       with it.  That prevents us from screwing up open ttys, ownership
-#       and permissions on a running system!
-#
-#       This script will NOT remove devices that no longer exist if their
-#       board or interface box has been removed.  If you want to get rid
-#       of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*"
-#       before running this script.  Running this script will then recreate
-#       all the valid devices.
-#
-#       Michael H. Warfield
-#       /\/\|=mhw=|\/\/
-#       mhw@wittsend.com
-#
-#       Updated 10/29/2000 for version 1.2.13 naming convention
-#               under devfs.    /\/\|=mhw=|\/\/
-#
-#       Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/
-#
-X
-if test -d /dev/ip2 ; then
-#       This is devfs mode...  We don't do anything except create symlinks
-#       from the real devices to the old names!
-X       cd /dev
-X       echo "Creating symbolic links to devfs devices"
-X       for i in `ls ip2` ; do
-X               if test ! -L ip2$i ; then
-X                       # Remove it incase it wasn't a symlink (old device)
-X                       rm -f ip2$i
-X                       ln -s ip2/$i ip2$i
-X               fi
-X       done
-X       for i in `( cd tts ; ls F* )` ; do
-X               if test ! -L tty$i ; then
-X                       # Remove it incase it wasn't a symlink (old device)
-X                       rm -f tty$i
-X                       ln -s tts/$i tty$i
-X               fi
-X       done
-X       for i in `( cd cua ; ls F* )` ; do
-X               DEVNUMBER=`expr $i : 'F\(.*\)'`
-X               if test ! -L cuf$DEVNUMBER ; then
-X                       # Remove it incase it wasn't a symlink (old device)
-X                       rm -f cuf$DEVNUMBER
-X                       ln -s cua/$i cuf$DEVNUMBER
-X               fi
-X       done
-X       exit 0
-fi
-X
-if test ! -f /proc/tty/drivers
-then
-X       echo "\
-Unable to check driver status.
-Make sure proc file system is mounted."
-X
-X       exit 255
-fi
-X
-if test ! -f /proc/tty/driver/ip2
-then
-X       echo "\
-Unable to locate ip2 proc file.
-Attempting to load driver"
-X
-X       if /sbin/insmod ip2
-X       then
-X               if test ! -f /proc/tty/driver/ip2
-X               then
-X                       echo "\
-Unable to locate ip2 proc file after loading driver.
-Driver initialization failure or driver version error.
-"
-X               exit 255
-X               fi
-X       else
-X               echo "Unable to load ip2 driver."
-X               exit 255
-X       fi
-fi
-X
-# Ok...  So we got the driver loaded and we can locate the procfs files.
-# Next we need our major numbers.
-X
-TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^     ]*[     ]*\([0-9]*\)[   ]*.*/\1/' < /proc/tty/drivers`
-CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^     ]*[     ]*\([0-9]*\)[   ]*.*/\1/' < /proc/tty/drivers`
-BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[     ]*.*/\1/' < /proc/tty/driver/ip2`
-X
-echo "\
-TTYMAJOR = $TTYMAJOR
-CUAMAJOR = $CUAMAJOR
-BRDMAJOR = $BRDMAJOR
-"
-X
-# Ok...  Now we should know our major numbers, if appropriate...
-# Now we need our boards and start the device loops.
-X
-grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest
-do
-X       # The test for blank "type" will catch the stats lead-in lines
-X       # if they exist in the file
-X       if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = ""
-X       then
-X               continue
-X       fi
-X
-X       BOARDNO=`expr "$number" : '\([0-9]\):'`
-X       PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '`
-X       MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '`
-X
-X       if test "$BOARDNO" = "" -o "$PORTS" = ""
-X       then
-#       This may be a bug.  We should at least get this much information
-X               echo "Unable to process board line"
-X               continue
-X       fi
-X
-X       if test "$MINORS" = ""
-X       then
-#       Silently skip this one.  This board seems to have no boxes
-X               continue
-X       fi
-X
-X       echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS"
-X
-X       if test "$BRDMAJOR" != ""
-X       then
-X               BRDMINOR=`expr $BOARDNO \* 4`
-X               STSMINOR=`expr $BRDMINOR + 1`
-X               if test ! -c /dev/ip2ipl$BOARDNO ; then
-X                       mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR
-X               fi
-X               if test ! -c /dev/ip2stat$BOARDNO ; then
-X                       mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR
-X               fi
-X       fi
-X
-X       if test "$TTYMAJOR" != ""
-X       then
-X               PORTNO=$BOARDBASE
-X
-X               for PORTNO in $MINORS
-X               do
-X                       if test ! -c /dev/ttyF$PORTNO ; then
-X                               # We got the hardware but no device - make it
-X                               mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO
-X                       fi      
-X               done
-X       fi
-X
-X       if test "$CUAMAJOR" != ""
-X       then
-X               PORTNO=$BOARDBASE
-X
-X               for PORTNO in $MINORS
-X               do
-X                       if test ! -c /dev/cuf$PORTNO ; then
-X                               # We got the hardware but no device - make it
-X                               mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO
-X                       fi      
-X               done
-X       fi
-done
-X
-Xexit 0
-SHAR_EOF
-  (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") &&
-  chmod 0755 'ip2mkdev' ||
-  $echo 'restore of' 'ip2mkdev' 'failed'
-  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
-  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
-    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
-    || $echo 'ip2mkdev:' 'MD5 check failed'
-cb5717134509f38bad9fde6b1f79b4a4  ip2mkdev
-SHAR_EOF
-  else
-    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`"
-    test 4251 -eq "$shar_count" ||
-    $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!"
-  fi
-fi
-rm -fr _sh17581
-exit 0
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 3ea809430eda..5d5865204a1d 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -223,6 +223,7 @@ srmcons_init(void)
                 driver->subtype = SYSTEM_TYPE_SYSCONS;
                 driver->init_termios = tty_std_termios;
                 tty_set_operations(driver, &srmcons_ops);
+                tty_port_link_device(&srmcons_singleton.port, driver, 0);
                 err = tty_register_driver(driver);
                 if (err) {
                         put_tty_driver(driver);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c1b93c752d70..9e80d209d138 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
 };
 
 #ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {
+        struct platform_device *pdev = to_platform_device(dev);
         struct omap_device *od = to_omap_device(pdev);
 
         if (!od)
@@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
  * in Smartidle Mode When Configured for DMA Operations.
  * WA: configure uart in force idle mode.
  */
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
 {
+        struct platform_device *pdev = to_platform_device(dev);
         struct omap_device *od = to_omap_device(pdev);
 
         omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
 }
 
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
 {
+        struct platform_device *pdev = to_platform_device(dev);
         struct omap_device *od = to_omap_device(pdev);
         u8 idlemode;
 
@@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev)
 }
 
 #else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
@@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
         omap_up.dma_rx_timeout = info->dma_rx_timeout;
         omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
         omap_up.autosuspend_timeout = info->autosuspend_timeout;
+        omap_up.DTR_gpio = info->DTR_gpio;
+        omap_up.DTR_inverted = info->DTR_inverted;
+        omap_up.DTR_present = info->DTR_present;
 
         pdata = &omap_up;
         pdata_size = sizeof(struct omap_uart_port_info);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a534d8880de1..1d2e3c6f8b59 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-        void __iomem *prcc_rst_set, *prcc_rst_clr;
-
-        prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-                        PRCC_K_SOFTRST_SET);
-        prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-                        PRCC_K_SOFTRST_CLEAR);
-
-        /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-        writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-        udelay(1);
-
-        /* Release soft reset PRCC_K_SOFTRST_SET */
-        writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-        udelay(1);
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
         .dma_filter = stedma40_filter,
         .dma_rx_param = &uart0_dma_cfg_rx,
         .dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-        .reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725ffcf2..a531149823bb 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -18,7 +18,7 @@
 #define __OMAP_SERIAL_H__
 
 #include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
 #include <linux/pm_qos.h>
 
 #include <plat/mux.h>
@@ -42,10 +42,10 @@
 #define OMAP_UART_WER_MOD_WKUP  0X7F
 
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX         0x04
+#define OMAP_UART_SW_TX         0x8
 
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX         0x04
+#define OMAP_UART_SW_RX         0x2
 
 #define OMAP_UART_SYSC_RESET    0X07
 #define OMAP_UART_TCR_TRIG      0X0F
@@ -69,11 +69,14 @@ struct omap_uart_port_info {
         unsigned int            dma_rx_timeout;
         unsigned int            autosuspend_timeout;
         unsigned int            dma_rx_poll_rate;
+        int                     DTR_gpio;
+        int                     DTR_inverted;
+        int                     DTR_present;
 
         int (*get_context_loss_count)(struct device *);
-        void (*set_forceidle)(struct platform_device *);
-        void (*set_noidle)(struct platform_device *);
-        void (*enable_wakeup)(struct platform_device *, bool);
+        void (*set_forceidle)(struct device *);
+        void (*set_noidle)(struct device *);
+        void (*enable_wakeup)(struct device *, bool);
 };
 
 struct uart_omap_dma {
@@ -102,39 +105,4 @@ struct uart_omap_dma {
         unsigned int            rx_timeout;
 };
 
-struct uart_omap_port {
-        struct uart_port        port;
-        struct uart_omap_dma    uart_dma;
-        struct platform_device  *pdev;
-
-        unsigned char           ier;
-        unsigned char           lcr;
-        unsigned char           mcr;
-        unsigned char           fcr;
-        unsigned char           efr;
-        unsigned char           dll;
-        unsigned char           dlh;
-        unsigned char           mdr1;
-        unsigned char           scr;
-
-        int                     use_dma;
-        /*
-         * Some bits in registers are cleared on a read, so they must
-         * be saved whenever the register is read but the bits will not
-         * be immediately processed.
-         */
-        unsigned int            lsr_break_flag;
-        unsigned char           msr_saved_flags;
-        char                    name[20];
-        unsigned long           port_activity;
-        u32                     context_loss_cnt;
-        u32                     errata;
-        u8                      wakeups_enabled;
-
-        struct pm_qos_request   pm_qos_request;
-        u32                     latency;
-        u32                     calc_latency;
-        struct work_struct      qos_work;
-};
-
 #endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index c34785dca92b..ec536e4e36c9 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -338,7 +338,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
         /* Handle turning off CRTSCTS */
         if ((old_termios->c_cflag & CRTSCTS) &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
         }
 }
@@ -545,6 +545,7 @@ static int __init simrs_init(void)
         /* the port is imaginary */
         printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
 
+        tty_port_link_device(&state->port, hp_simserial_driver, 0);
         retval = tty_register_driver(hp_simserial_driver);
         if (retval) {
                 printk(KERN_ERR "Couldn't register simserial driver\n");
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 8db25e806947..16d170f53bfd 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -19,6 +19,7 @@
 #include <asm/natfeat.h>
 
 static int stderr_id;
+static struct tty_port nfcon_tty_port;
 static struct tty_driver *nfcon_tty_driver;
 
 static void nfputs(const char *str, unsigned int count)
@@ -119,6 +120,8 @@ static int __init nfcon_init(void)
 {
         int res;
 
+        tty_port_init(&nfcon_tty_port);
+
         stderr_id = nf_get_id("NF_STDERR");
         if (!stderr_id)
                 return -ENODEV;
@@ -135,6 +138,7 @@ static int __init nfcon_init(void)
         nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
 
         tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
+        tty_port_link_device(&nfcon_tty_port, nfcon_tty_driver, 0);
         res = tty_register_driver(nfcon_tty_driver);
         if (res) {
                 pr_err("failed to register nfcon tty driver\n");
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 138b2216b4f8..569f41bdcc46 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -47,40 +47,40 @@ static int __devinit octeon_serial_probe(struct platform_device *pdev)
 {
         int irq, res;
         struct resource *res_mem;
-        struct uart_port port;
+        struct uart_8250_port up;
 
         /* All adaptors have an irq.  */
         irq = platform_get_irq(pdev, 0);
         if (irq < 0)
                 return irq;
 
-        memset(&port, 0, sizeof(port));
+        memset(&up, 0, sizeof(up));
 
-        port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
-        port.type = PORT_OCTEON;
-        port.iotype = UPIO_MEM;
-        port.regshift = 3;
-        port.dev = &pdev->dev;
+        up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+        up.port.type = PORT_OCTEON;
+        up.port.iotype = UPIO_MEM;
+        up.port.regshift = 3;
+        up.port.dev = &pdev->dev;
 
         if (octeon_is_simulation())
                 /* Make simulator output fast*/
-                port.uartclk = 115200 * 16;
+                up.port.uartclk = 115200 * 16;
         else
-                port.uartclk = octeon_get_io_clock_rate();
+                up.port.uartclk = octeon_get_io_clock_rate();
 
-        port.serial_in = octeon_serial_in;
-        port.serial_out = octeon_serial_out;
-        port.irq = irq;
+        up.port.serial_in = octeon_serial_in;
+        up.port.serial_out = octeon_serial_out;
+        up.port.irq = irq;
 
         res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (res_mem == NULL) {
                 dev_err(&pdev->dev, "found no memory resource\n");
                 return -ENXIO;
         }
-        port.mapbase = res_mem->start;
-        port.membase = ioremap(res_mem->start, resource_size(res_mem));
+        up.port.mapbase = res_mem->start;
+        up.port.membase = ioremap(res_mem->start, resource_size(res_mem));
 
-        res = serial8250_register_port(&port);
+        res = serial8250_register_8250_port(&up);
 
         return res >= 0 ? 0 : res;
 }
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index c48194c3073b..b2d4f492d782 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -133,6 +133,38 @@ static struct platform_device sc26xx_pdev = {
         }
 };
 
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+         "in the linux-serial mailing list."
+
+/* The code bellow is a replacement of SC26XX to SCCNXP */
+#if 0
+#include <linux/platform_data/sccnxp.h>
+
+static struct sccnxp_pdata sccnxp_data = {
+        .reg_shift      = 2,
+        .frequency      = 3686400,
+        .mctrl_cfg[0]   = MCTRL_SIG(DTR_OP, LINE_OP7) |
+                          MCTRL_SIG(RTS_OP, LINE_OP3) |
+                          MCTRL_SIG(DSR_IP, LINE_IP5) |
+                          MCTRL_SIG(DCD_IP, LINE_IP6),
+        .mctrl_cfg[1]   = MCTRL_SIG(DTR_OP, LINE_OP2) |
+                          MCTRL_SIG(RTS_OP, LINE_OP1) |
+                          MCTRL_SIG(DSR_IP, LINE_IP0) |
+                          MCTRL_SIG(CTS_IP, LINE_IP1) |
+                          MCTRL_SIG(DCD_IP, LINE_IP2) |
+                          MCTRL_SIG(RNG_IP, LINE_IP3),
+};
+
+static struct platform_device sc2681_pdev = {
+        .name           = "sc2681",
+        .resource       = sc2xxx_rsrc,
+        .num_resources  = ARRAY_SIZE(sc2xxx_rsrc),
+        .dev    = {
+                .platform_data  = &sccnxp_data,
+        },
+};
+#endif
+
 static u32 a20r_ack_hwint(void)
 {
         u32 status = read_c0_status();
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 47341aa208f2..88238638aee6 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -202,6 +202,7 @@ static int __init pdc_console_tty_driver_init(void)
         pdc_console_tty_driver->flags = TTY_DRIVER_REAL_RAW |
                 TTY_DRIVER_RESET_TERMIOS;
         tty_set_operations(pdc_console_tty_driver, &pdc_console_tty_ops);
+        tty_port_link_device(&tty_port, pdc_console_tty_driver, 0);
 
         err = tty_register_driver(pdc_console_tty_driver);
         if (err) {
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index bbaf2c59830a..457475f98414 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -409,7 +409,8 @@ int setup_one_line(struct line *lines, int n, char *init,
                 line->valid = 1;
                 err = parse_chan_pair(new, line, n, opts, error_out);
                 if (!err) {
-                        struct device *d = tty_register_device(driver, n, NULL);
+                        struct device *d = tty_port_register_device(&line->port,
+                                        driver, n, NULL);
                         if (IS_ERR(d)) {
                                 *error_out = "Failed to register device";
                                 err = PTR_ERR(d);
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index f9726f6afdf1..2cd3d3a3400b 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -223,6 +223,7 @@ int __init rs_init(void)
         serial_driver->flags = TTY_DRIVER_REAL_RAW;
 
         tty_set_operations(serial_driver, &serial_ops);
+        tty_port_link_device(&serial_port, serial_driver, 0);
 
         if (tty_register_driver(serial_driver))
                 panic("Couldn't register serial driver\n");
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 12172a6a95c4..0bc8a6a6a148 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -58,7 +58,7 @@ static int ath_wakeup_ar3k(struct tty_struct *tty)
                 return status;
 
         /* Disable Automatic RTSCTS */
-        memcpy(&ktermios, tty->termios, sizeof(ktermios));
+        ktermios = tty->termios;
         ktermios.c_cflag &= ~CRTSCTS;
         tty_set_termios(tty, &ktermios);
 
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 1d82d5838f0c..164544afd680 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -430,7 +430,7 @@ static ssize_t mwave_write(struct file *file, const char __user *buf,
 
 static int register_serial_portandirq(unsigned int port, int irq)
 {
-        struct uart_port uart;
+        struct uart_8250_port uart;
         
         switch ( port ) {
                 case 0x3f8:
@@ -462,14 +462,14 @@ static int register_serial_portandirq(unsigned int port, int irq)
         } /* switch */
         /* irq is okay */
 
-        memset(&uart, 0, sizeof(struct uart_port));
+        memset(&uart, 0, sizeof(uart));
         
-        uart.uartclk =  1843200;
-        uart.iobase = port;
-        uart.irq = irq;
-        uart.iotype = UPIO_PORT;
-        uart.flags =  UPF_SHARE_IRQ;
-        return serial8250_register_port(&uart);
+        uart.port.uartclk =  1843200;
+        uart.port.iobase = port;
+        uart.port.irq = irq;
+        uart.port.iotype = UPIO_PORT;
+        uart.port.flags =  UPF_SHARE_IRQ;
+        return serial8250_register_8250_port(&uart);
 }
 
 
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 0a484b4a1b02..3f57d5de3957 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1050,7 +1050,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
         wake_up_interruptible(&info->status_event_wait_q);
         wake_up_interruptible(&info->event_wait_q);
 
-        if (info->port.flags & ASYNC_CTS_FLOW) {
+        if (tty_port_cts_enabled(&info->port)) {
                 if (tty->hw_stopped) {
                         if (info->serial_signals & SerialSignal_CTS) {
                                 if (debug_level >= DEBUG_LEVEL_ISR)
@@ -1344,7 +1344,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
         /* TODO:disable interrupts instead of reset to preserve signal states */
         reset_device(info);
 
-        if (!tty || tty->termios->c_cflag & HUPCL) {
+        if (!tty || tty->termios.c_cflag & HUPCL) {
                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
                 set_signals(info);
         }
@@ -1385,7 +1385,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
         port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
         get_signals(info);
 
-        if (info->netcount || (tty && (tty->termios->c_cflag & CREAD)))
+        if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
                 rx_start(info);
 
         spin_unlock_irqrestore(&info->lock,flags);
@@ -1398,14 +1398,14 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
         unsigned cflag;
         int bits_per_char;
 
-        if (!tty || !tty->termios)
+        if (!tty)
                 return;
 
         if (debug_level >= DEBUG_LEVEL_INFO)
                 printk("%s(%d):mgslpc_change_params(%s)\n",
                          __FILE__,__LINE__, info->device_name );
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         /* if B0 rate (hangup) specified then negate DTR and RTS */
         /* otherwise assert DTR and RTS */
@@ -1728,7 +1728,7 @@ static void mgslpc_throttle(struct tty_struct * tty)
         if (I_IXOFF(tty))
                 mgslpc_send_xchar(tty, STOP_CHAR(tty));
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->lock,flags);
                 info->serial_signals &= ~SerialSignal_RTS;
                 set_signals(info);
@@ -1757,7 +1757,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty)
                         mgslpc_send_xchar(tty, START_CHAR(tty));
         }
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->lock,flags);
                 info->serial_signals |= SerialSignal_RTS;
                 set_signals(info);
@@ -2293,8 +2293,8 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
                         tty->driver->name );
 
         /* just return if nothing has changed */
-        if ((tty->termios->c_cflag == old_termios->c_cflag)
-            && (RELEVANT_IFLAG(tty->termios->c_iflag)
+        if ((tty->termios.c_cflag == old_termios->c_cflag)
+            && (RELEVANT_IFLAG(tty->termios.c_iflag)
                 == RELEVANT_IFLAG(old_termios->c_iflag)))
           return;
 
@@ -2302,7 +2302,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
 
         /* Handle transition to B0 status */
         if (old_termios->c_cflag & CBAUD &&
-            !(tty->termios->c_cflag & CBAUD)) {
+            !(tty->termios.c_cflag & CBAUD)) {
                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
                 spin_lock_irqsave(&info->lock,flags);
                 set_signals(info);
@@ -2311,9 +2311,9 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
 
         /* Handle transition away from B0 status */
         if (!(old_termios->c_cflag & CBAUD) &&
-            tty->termios->c_cflag & CBAUD) {
+            tty->termios.c_cflag & CBAUD) {
                 info->serial_signals |= SerialSignal_DTR;
-                if (!(tty->termios->c_cflag & CRTSCTS) ||
+                if (!(tty->termios.c_cflag & CRTSCTS) ||
                     !test_bit(TTY_THROTTLED, &tty->flags)) {
                         info->serial_signals |= SerialSignal_RTS;
                 }
@@ -2324,7 +2324,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
 
         /* Handle turning off CRTSCTS */
         if (old_termios->c_cflag & CRTSCTS &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 tx_release(tty);
         }
@@ -2731,6 +2731,8 @@ static void mgslpc_add_device(MGSLPC_INFO *info)
 #if SYNCLINK_GENERIC_HDLC
         hdlcdev_init(info);
 #endif
+        tty_port_register_device(&info->port, serial_driver, info->line,
+                        &info->p_dev->dev);
 }
 
 static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
@@ -2744,6 +2746,7 @@ static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
                                 last->next_device = info->next_device;
                         else
                                 mgslpc_device_list = info->next_device;
+                        tty_unregister_device(serial_driver, info->line);
 #if SYNCLINK_GENERIC_HDLC
                         hdlcdev_exit(info);
 #endif
@@ -2798,77 +2801,63 @@ static const struct tty_operations mgslpc_ops = {
         .proc_fops = &mgslpc_proc_fops,
 };
 
-static void synclink_cs_cleanup(void)
+static int __init synclink_cs_init(void)
 {
         int rc;
 
-        while(mgslpc_device_list)
-                mgslpc_remove_device(mgslpc_device_list);
-
-        if (serial_driver) {
-                if ((rc = tty_unregister_driver(serial_driver)))
-                        printk("%s(%d) failed to unregister tty driver err=%d\n",
-                               __FILE__,__LINE__,rc);
-                put_tty_driver(serial_driver);
+        if (break_on_load) {
+                mgslpc_get_text_ptr();
+                BREAKPOINT();
         }
 
-        pcmcia_unregister_driver(&mgslpc_driver);
-}
-
-static int __init synclink_cs_init(void)
-{
-    int rc;
-
-    if (break_on_load) {
-            mgslpc_get_text_ptr();
-            BREAKPOINT();
-    }
-
-    if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
-            return rc;
-
-    serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
-    if (!serial_driver) {
-            rc = -ENOMEM;
-            goto error;
-    }
+        serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
+                        TTY_DRIVER_REAL_RAW |
+                        TTY_DRIVER_DYNAMIC_DEV);
+        if (IS_ERR(serial_driver)) {
+                rc = PTR_ERR(serial_driver);
+                goto err;
+        }
 
-    /* Initialize the tty_driver structure */
-
-    serial_driver->driver_name = "synclink_cs";
-    serial_driver->name = "ttySLP";
-    serial_driver->major = ttymajor;
-    serial_driver->minor_start = 64;
-    serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-    serial_driver->subtype = SERIAL_TYPE_NORMAL;
-    serial_driver->init_termios = tty_std_termios;
-    serial_driver->init_termios.c_cflag =
-            B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-    serial_driver->flags = TTY_DRIVER_REAL_RAW;
-    tty_set_operations(serial_driver, &mgslpc_ops);
-
-    if ((rc = tty_register_driver(serial_driver)) < 0) {
-            printk("%s(%d):Couldn't register serial driver\n",
-                   __FILE__,__LINE__);
-            put_tty_driver(serial_driver);
-            serial_driver = NULL;
-            goto error;
-    }
+        /* Initialize the tty_driver structure */
+        serial_driver->driver_name = "synclink_cs";
+        serial_driver->name = "ttySLP";
+        serial_driver->major = ttymajor;
+        serial_driver->minor_start = 64;
+        serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+        serial_driver->subtype = SERIAL_TYPE_NORMAL;
+        serial_driver->init_termios = tty_std_termios;
+        serial_driver->init_termios.c_cflag =
+        B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+        tty_set_operations(serial_driver, &mgslpc_ops);
+
+        rc = tty_register_driver(serial_driver);
+        if (rc < 0) {
+                printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
+                                __FILE__, __LINE__);
+                goto err_put_tty;
+        }
 
-    printk("%s %s, tty major#%d\n",
-           driver_name, driver_version,
-           serial_driver->major);
+        rc = pcmcia_register_driver(&mgslpc_driver);
+        if (rc < 0)
+                goto err_unreg_tty;
 
-    return 0;
+        printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
+                        serial_driver->major);
 
-error:
-    synclink_cs_cleanup();
-    return rc;
+        return 0;
+err_unreg_tty:
+        tty_unregister_driver(serial_driver);
+err_put_tty:
+        put_tty_driver(serial_driver);
+err:
+        return rc;
 }
 
 static void __exit synclink_cs_exit(void)
 {
-        synclink_cs_cleanup();
+        pcmcia_unregister_driver(&mgslpc_driver);
+        tty_unregister_driver(serial_driver);
+        put_tty_driver(serial_driver);
 }
 
 module_init(synclink_cs_init);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 46b77ede84c0..af98f6d6509b 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -67,7 +67,7 @@ static int tpk_printk(const unsigned char *buf, int count)
                                 tmp[tpk_curr + 1] = '\0';
                                 printk(KERN_INFO "%s%s", tpk_tag, tmp);
                                 tpk_curr = 0;
-                                if (buf[i + 1] == '\n')
+                                if ((i + 1) < count && buf[i + 1] == '\n')
                                         i++;
                                 break;
                         case '\n':
@@ -178,11 +178,17 @@ static struct tty_driver *ttyprintk_driver;
 static int __init ttyprintk_init(void)
 {
         int ret = -ENOMEM;
-        void *rp;
 
-        ttyprintk_driver = alloc_tty_driver(1);
-        if (!ttyprintk_driver)
-                return ret;
+        tty_port_init(&tpk_port.port);
+        tpk_port.port.ops = &null_ops;
+        mutex_init(&tpk_port.port_write_mutex);
+
+        ttyprintk_driver = tty_alloc_driver(1,
+                        TTY_DRIVER_RESET_TERMIOS |
+                        TTY_DRIVER_REAL_RAW |
+                        TTY_DRIVER_UNNUMBERED_NODE);
+        if (IS_ERR(ttyprintk_driver))
+                return PTR_ERR(ttyprintk_driver);
 
         ttyprintk_driver->driver_name = "ttyprintk";
         ttyprintk_driver->name = "ttyprintk";
@@ -191,9 +197,8 @@ static int __init ttyprintk_init(void)
         ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
         ttyprintk_driver->init_termios = tty_std_termios;
         ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
-        ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS |
-                TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
         tty_set_operations(ttyprintk_driver, &ttyprintk_ops);
+        tty_port_link_device(&tpk_port.port, ttyprintk_driver, 0);
 
         ret = tty_register_driver(ttyprintk_driver);
         if (ret < 0) {
@@ -201,22 +206,10 @@ static int __init ttyprintk_init(void)
                 goto error;
         }
 
-        /* create our unnumbered device */
-        rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL,
-                                ttyprintk_driver->name);
-        if (IS_ERR(rp)) {
-                printk(KERN_ERR "Couldn't create ttyprintk device\n");
-                ret = PTR_ERR(rp);
-                goto error;
-        }
-
-        tty_port_init(&tpk_port.port);
-        tpk_port.port.ops = &null_ops;
-        mutex_init(&tpk_port.port_write_mutex);
-
         return 0;
 
 error:
+        tty_unregister_driver(ttyprintk_driver);
         put_tty_driver(ttyprintk_driver);
         ttyprintk_driver = NULL;
         return ret;
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 38c4bd87b2c9..c679867c2ccd 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -234,7 +234,8 @@ static struct capiminor *capiminor_alloc(struct capi20_appl *ap, u32 ncci)
 
         mp->minor = minor;
 
-        dev = tty_register_device(capinc_tty_driver, minor, NULL);
+        dev = tty_port_register_device(&mp->port, capinc_tty_driver, minor,
+                        NULL);
         if (IS_ERR(dev))
                 goto err_out2;
 
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index a6d9fd2858f7..67abf3ff45e8 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -446,8 +446,8 @@ static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
                 goto out;
         }
 
-        iflag = tty->termios->c_iflag;
-        cflag = tty->termios->c_cflag;
+        iflag = tty->termios.c_iflag;
+        cflag = tty->termios.c_cflag;
         old_cflag = old ? old->c_cflag : cflag;
         gig_dbg(DEBUG_IF, "%u: iflag %x cflag %x old %x",
                 cs->minor_index, iflag, cflag, old_cflag);
@@ -524,7 +524,8 @@ void gigaset_if_init(struct cardstate *cs)
         tasklet_init(&cs->if_wake_tasklet, if_wake, (unsigned long) cs);
 
         mutex_lock(&cs->mutex);
-        cs->tty_dev = tty_register_device(drv->tty, cs->minor_index, NULL);
+        cs->tty_dev = tty_port_register_device(&cs->port, drv->tty,
+                        cs->minor_index, NULL);
 
         if (!IS_ERR(cs->tty_dev))
                 dev_set_drvdata(cs->tty_dev, cs);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 7bc50670d7d9..b817809f763c 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1009,15 +1009,15 @@ isdn_tty_change_speed(modem_info *info)
                 quot;
         int i;
 
-        if (!port->tty || !port->tty->termios)
+        if (!port->tty)
                 return;
-        cflag = port->tty->termios->c_cflag;
+        cflag = port->tty->termios.c_cflag;
 
         quot = i = cflag & CBAUD;
         if (i & CBAUDEX) {
                 i &= ~CBAUDEX;
                 if (i < 1 || i > 2)
-                        port->tty->termios->c_cflag &= ~CBAUDEX;
+                        port->tty->termios.c_cflag &= ~CBAUDEX;
                 else
                         i += 15;
         }
@@ -1097,7 +1097,7 @@ isdn_tty_shutdown(modem_info *info)
 #endif
         isdn_unlock_drivers();
         info->msr &= ~UART_MSR_RI;
-        if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+        if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
                 info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
                 if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
                         isdn_tty_modem_reset_regs(info, 0);
@@ -1469,13 +1469,13 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
         if (!old_termios)
                 isdn_tty_change_speed(info);
         else {
-                if (tty->termios->c_cflag == old_termios->c_cflag &&
-                    tty->termios->c_ispeed == old_termios->c_ispeed &&
-                    tty->termios->c_ospeed == old_termios->c_ospeed)
+                if (tty->termios.c_cflag == old_termios->c_cflag &&
+                    tty->termios.c_ispeed == old_termios->c_ispeed &&
+                    tty->termios.c_ospeed == old_termios->c_ospeed)
                         return;
                 isdn_tty_change_speed(info);
                 if ((old_termios->c_cflag & CRTSCTS) &&
-                    !(tty->termios->c_cflag & CRTSCTS))
+                    !(tty->termios.c_cflag & CRTSCTS))
                         tty->hw_stopped = 0;
         }
 }
@@ -1486,6 +1486,18 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
  * ------------------------------------------------------------
  */
 
+static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+        modem_info *info = &dev->mdm.info[tty->index];
+
+        if (isdn_tty_paranoia_check(info, tty->name, __func__))
+                return -ENODEV;
+
+        tty->driver_data = info;
+
+        return tty_port_install(&info->port, driver, tty);
+}
+
 /*
  * This routine is called whenever a serial port is opened.  It
  * enables interrupts for a serial port, linking in its async structure into
@@ -1495,22 +1507,16 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 static int
 isdn_tty_open(struct tty_struct *tty, struct file *filp)
 {
-        struct tty_port *port;
-        modem_info *info;
+        modem_info *info = tty->driver_data;
+        struct tty_port *port = &info->port;
         int retval;
 
-        info = &dev->mdm.info[tty->index];
-        if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
-                return -ENODEV;
-        port = &info->port;
 #ifdef ISDN_DEBUG_MODEM_OPEN
         printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
                port->count);
 #endif
         port->count++;
-        tty->driver_data = info;
         port->tty = tty;
-        tty->port = port;
         /*
          * Start up serial port
          */
@@ -1738,6 +1744,7 @@ modem_write_profile(atemu *m)
 }
 
 static const struct tty_operations modem_ops = {
+        .install = isdn_tty_install,
         .open = isdn_tty_open,
         .close = isdn_tty_close,
         .write = isdn_tty_write,
@@ -1782,7 +1789,7 @@ isdn_tty_modem_init(void)
         m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
         m->tty_modem->init_termios = tty_std_termios;
         m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-        m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+        m->tty_modem->flags = TTY_DRIVER_REAL_RAW;
         m->tty_modem->driver_name = "isdn_tty";
         tty_set_operations(m->tty_modem, &modem_ops);
         retval = tty_register_driver(m->tty_modem);
diff --git a/drivers/misc/ibmasm/uart.c b/drivers/misc/ibmasm/uart.c
index 1dcb9ae1905a..01e2b0d7e590 100644
--- a/drivers/misc/ibmasm/uart.c
+++ b/drivers/misc/ibmasm/uart.c
@@ -33,7 +33,7 @@
 
 void ibmasm_register_uart(struct service_processor *sp)
 {
-        struct uart_port uport;
+        struct uart_8250_port uart;
         void __iomem *iomem_base;
 
         iomem_base = sp->base_address + SCOUT_COM_B_BASE;
@@ -47,14 +47,14 @@ void ibmasm_register_uart(struct service_processor *sp)
                 return;
         }
 
-        memset(&uport, 0, sizeof(struct uart_port));
-        uport.irq       = sp->irq;
-        uport.uartclk   = 3686400;
-        uport.flags     = UPF_SHARE_IRQ;
-        uport.iotype    = UPIO_MEM;
-        uport.membase   = iomem_base;
+        memset(&uart, 0, sizeof(uart));
+        uart.port.irq           = sp->irq;
+        uart.port.uartclk       = 3686400;
+        uart.port.flags         = UPF_SHARE_IRQ;
+        uart.port.iotype        = UPIO_MEM;
+        uart.port.membase       = iomem_base;
 
-        sp->serial_line = serial8250_register_port(&uport);
+        sp->serial_line = serial8250_register_8250_port(&uart);
         if (sp->serial_line < 0) {
                 dev_err(sp->dev, "Failed to register serial port\n");
                 return;
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index b7eb545394b1..4999b34b7a60 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -60,7 +60,7 @@ struct pti_tty {
 };
 
 struct pti_dev {
-        struct tty_port port;
+        struct tty_port port[PTITTY_MINOR_NUM];
         unsigned long pti_addr;
         unsigned long aperture_base;
         void __iomem *pti_ioaddr;
@@ -76,7 +76,7 @@ struct pti_dev {
  */
 static DEFINE_MUTEX(alloclock);
 
-static struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] __devinitconst = {
                 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)},
                 {0}
 };
@@ -393,25 +393,6 @@ void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count)
 }
 EXPORT_SYMBOL_GPL(pti_writedata);
 
-/**
- * pti_pci_remove()- Driver exit method to remove PTI from
- *                 PCI bus.
- * @pdev: variable containing pci info of PTI.
- */
-static void __devexit pti_pci_remove(struct pci_dev *pdev)
-{
-        struct pti_dev *drv_data;
-
-        drv_data = pci_get_drvdata(pdev);
-        if (drv_data != NULL) {
-                pci_iounmap(pdev, drv_data->pti_ioaddr);
-                pci_set_drvdata(pdev, NULL);
-                kfree(drv_data);
-                pci_release_region(pdev, 1);
-                pci_disable_device(pdev);
-        }
-}
-
 /*
  * for the tty_driver_*() basic function descriptions, see tty_driver.h.
  * Specific header comments made for PTI-related specifics.
@@ -446,7 +427,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp)
          * also removes a locking requirement for the actual write
          * procedure.
          */
-        return tty_port_open(&drv_data->port, tty, filp);
+        return tty_port_open(tty->port, tty, filp);
 }
 
 /**
@@ -462,7 +443,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp)
  */
 static void pti_tty_driver_close(struct tty_struct *tty, struct file *filp)
 {
-        tty_port_close(&drv_data->port, tty, filp);
+        tty_port_close(tty->port, tty, filp);
 }
 
 /**
@@ -818,6 +799,7 @@ static const struct tty_port_operations tty_port_ops = {
 static int __devinit pti_pci_probe(struct pci_dev *pdev,
                 const struct pci_device_id *ent)
 {
+        unsigned int a;
         int retval = -EINVAL;
         int pci_bar = 1;
 
@@ -830,7 +812,7 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
                         __func__, __LINE__);
                 pr_err("%s(%d): Error value returned: %d\n",
                         __func__, __LINE__, retval);
-                return retval;
+                goto err;
         }
 
         retval = pci_enable_device(pdev);
@@ -838,17 +820,16 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
                 dev_err(&pdev->dev,
                         "%s: pci_enable_device() returned error %d\n",
                         __func__, retval);
-                return retval;
+                goto err_unreg_misc;
         }
 
         drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
-
         if (drv_data == NULL) {
                 retval = -ENOMEM;
                 dev_err(&pdev->dev,
                         "%s(%d): kmalloc() returned NULL memory.\n",
                         __func__, __LINE__);
-                return retval;
+                goto err_disable_pci;
         }
         drv_data->pti_addr = pci_resource_start(pdev, pci_bar);
 
@@ -857,33 +838,65 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
                 dev_err(&pdev->dev,
                         "%s(%d): pci_request_region() returned error %d\n",
                         __func__, __LINE__, retval);
-                kfree(drv_data);
-                return retval;
+                goto err_free_dd;
         }
         drv_data->aperture_base = drv_data->pti_addr+APERTURE_14;
         drv_data->pti_ioaddr =
                 ioremap_nocache((u32)drv_data->aperture_base,
                 APERTURE_LEN);
         if (!drv_data->pti_ioaddr) {
-                pci_release_region(pdev, pci_bar);
                 retval = -ENOMEM;
-                kfree(drv_data);
-                return retval;
+                goto err_rel_reg;
         }
 
         pci_set_drvdata(pdev, drv_data);
 
-        tty_port_init(&drv_data->port);
-        drv_data->port.ops = &tty_port_ops;
+        for (a = 0; a < PTITTY_MINOR_NUM; a++) {
+                struct tty_port *port = &drv_data->port[a];
+                tty_port_init(port);
+                port->ops = &tty_port_ops;
 
-        tty_register_device(pti_tty_driver, 0, &pdev->dev);
-        tty_register_device(pti_tty_driver, 1, &pdev->dev);
+                tty_port_register_device(port, pti_tty_driver, a, &pdev->dev);
+        }
 
         register_console(&pti_console);
 
+        return 0;
+err_rel_reg:
+        pci_release_region(pdev, pci_bar);
+err_free_dd:
+        kfree(drv_data);
+err_disable_pci:
+        pci_disable_device(pdev);
+err_unreg_misc:
+        misc_deregister(&pti_char_driver);
+err:
         return retval;
 }
 
+/**
+ * pti_pci_remove()- Driver exit method to remove PTI from
+ *                 PCI bus.
+ * @pdev: variable containing pci info of PTI.
+ */
+static void __devexit pti_pci_remove(struct pci_dev *pdev)
+{
+        struct pti_dev *drv_data = pci_get_drvdata(pdev);
+
+        unregister_console(&pti_console);
+
+        tty_unregister_device(pti_tty_driver, 0);
+        tty_unregister_device(pti_tty_driver, 1);
+
+        iounmap(drv_data->pti_ioaddr);
+        pci_set_drvdata(pdev, NULL);
+        kfree(drv_data);
+        pci_release_region(pdev, 1);
+        pci_disable_device(pdev);
+
+        misc_deregister(&pti_char_driver);
+}
+
 static struct pci_driver pti_pci_driver = {
         .name           = PCINAME,
         .id_table       = pci_ids,
@@ -933,25 +946,24 @@ static int __init pti_init(void)
                 pr_err("%s(%d): Error value returned: %d\n",
                         __func__, __LINE__, retval);
 
-                pti_tty_driver = NULL;
-                return retval;
+                goto put_tty;
         }
 
         retval = pci_register_driver(&pti_pci_driver);
-
         if (retval) {
                 pr_err("%s(%d): PCI registration failed of pti driver\n",
                         __func__, __LINE__);
                 pr_err("%s(%d): Error value returned: %d\n",
                         __func__, __LINE__, retval);
-
-                tty_unregister_driver(pti_tty_driver);
-                pr_err("%s(%d): Unregistering TTY part of pti driver\n",
-                        __func__, __LINE__);
-                pti_tty_driver = NULL;
-                return retval;
+                goto unreg_tty;
         }
 
+        return 0;
+unreg_tty:
+        tty_unregister_driver(pti_tty_driver);
+put_tty:
+        put_tty_driver(pti_tty_driver);
+        pti_tty_driver = NULL;
         return retval;
 }
 
@@ -960,31 +972,9 @@ static int __init pti_init(void)
  */
 static void __exit pti_exit(void)
 {
-        int retval;
-
-        tty_unregister_device(pti_tty_driver, 0);
-        tty_unregister_device(pti_tty_driver, 1);
-
-        retval = tty_unregister_driver(pti_tty_driver);
-        if (retval) {
-                pr_err("%s(%d): TTY unregistration failed of pti driver\n",
-                        __func__, __LINE__);
-                pr_err("%s(%d): Error value returned: %d\n",
-                        __func__, __LINE__, retval);
-        }
-
+        tty_unregister_driver(pti_tty_driver);
         pci_unregister_driver(&pti_pci_driver);
-
-        retval = misc_deregister(&pti_char_driver);
-        if (retval) {
-                pr_err("%s(%d): CHAR unregistration failed of pti driver\n",
-                        __func__, __LINE__);
-                pr_err("%s(%d): Error value returned: %d\n",
-                        __func__, __LINE__, retval);
-        }
-
-        unregister_console(&pti_console);
-        return;
+        put_tty_driver(pti_tty_driver);
 }
 
 module_init(pti_init);
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 5a2cbfac66d2..d2339ea37815 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -518,7 +518,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
         if (status & UART_MSR_DCTS) {
                 port->icount.cts++;
                 tty = tty_port_tty_get(&port->port);
-                if (tty && (tty->termios->c_cflag & CRTSCTS)) {
+                if (tty && (tty->termios.c_cflag & CRTSCTS)) {
                         int cts = (status & UART_MSR_CTS);
                         if (tty->hw_stopped) {
                                 if (cts) {
@@ -671,12 +671,12 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
         port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
         port->mctrl = TIOCM_OUT2;
 
-        sdio_uart_change_speed(port, tty->termios, NULL);
+        sdio_uart_change_speed(port, &tty->termios, NULL);
 
-        if (tty->termios->c_cflag & CBAUD)
+        if (tty->termios.c_cflag & CBAUD)
                 sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
 
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
                         tty->hw_stopped = 1;
 
@@ -850,7 +850,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
 {
         struct sdio_uart_port *port = tty->driver_data;
 
-        if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+        if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
                 return;
 
         if (sdio_uart_claim_func(port) != 0)
@@ -861,7 +861,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
                 sdio_uart_start_tx(port);
         }
 
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 sdio_uart_clear_mctrl(port, TIOCM_RTS);
 
         sdio_uart_irq(port->func);
@@ -872,7 +872,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
 {
         struct sdio_uart_port *port = tty->driver_data;
 
-        if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+        if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
                 return;
 
         if (sdio_uart_claim_func(port) != 0)
@@ -887,7 +887,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
                 }
         }
 
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 sdio_uart_set_mctrl(port, TIOCM_RTS);
 
         sdio_uart_irq(port->func);
@@ -898,12 +898,12 @@ static void sdio_uart_set_termios(struct tty_struct *tty,
                                                 struct ktermios *old_termios)
 {
         struct sdio_uart_port *port = tty->driver_data;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
 
         if (sdio_uart_claim_func(port) != 0)
                 return;
 
-        sdio_uart_change_speed(port, tty->termios, old_termios);
+        sdio_uart_change_speed(port, &tty->termios, old_termios);
 
         /* Handle transition to B0 status */
         if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
@@ -1132,8 +1132,8 @@ static int sdio_uart_probe(struct sdio_func *func,
                 kfree(port);
         } else {
                 struct device *dev;
-                dev = tty_register_device(sdio_uart_tty_driver,
-                                                port->index, &func->dev);
+                dev = tty_port_register_device(&port->port,
+                                sdio_uart_tty_driver, port->index, &func->dev);
                 if (IS_ERR(dev)) {
                         sdio_uart_port_remove(port);
                         ret = PTR_ERR(dev);
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index b5ba3084c7fc..3e5519a0acc7 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1147,15 +1147,17 @@ static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
 {
 #define COSMISC_CONSTANT 6
 
-        struct uart_port port = {
-                .irq            = 0,
-                .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-                .iotype         = UPIO_MEM,
-                .regshift       = 0,
-                .uartclk        = (22000000 << 1) / COSMISC_CONSTANT,
-
-                .membase        = (unsigned char __iomem *) uart,
-                .mapbase        = (unsigned long) uart,
+        struct uart_8250_port port = {
+                .port = {
+                        .irq            = 0,
+                        .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+                        .iotype         = UPIO_MEM,
+                        .regshift       = 0,
+                        .uartclk        = (22000000 << 1) / COSMISC_CONSTANT,
+
+                        .membase        = (unsigned char __iomem *) uart,
+                        .mapbase        = (unsigned long) uart,
+                }
         };
         unsigned char lcr;
 
@@ -1164,7 +1166,7 @@ static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
         uart->iu_scr = COSMISC_CONSTANT,
         uart->iu_lcr = lcr;
         uart->iu_lcr;
-        serial8250_register_port(&port);
+        serial8250_register_8250_port(&port);
 }
 
 static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 3352b2443e58..30087ca23a0f 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -124,8 +124,8 @@ static int irtty_change_speed(struct sir_dev *dev, unsigned speed)
         tty = priv->tty;
 
         mutex_lock(&tty->termios_mutex);
-        old_termios = *(tty->termios);
-        cflag = tty->termios->c_cflag;
+        old_termios = tty->termios;
+        cflag = tty->termios.c_cflag;
         tty_encode_baud_rate(tty, speed, speed);
         if (tty->ops->set_termios)
                 tty->ops->set_termios(tty, &old_termios);
@@ -281,15 +281,15 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
         int cflag;
 
         mutex_lock(&tty->termios_mutex);
-        old_termios = *(tty->termios);
-        cflag = tty->termios->c_cflag;
+        old_termios = tty->termios;
+        cflag = tty->termios.c_cflag;
         
         if (stop)
                 cflag &= ~CREAD;
         else
                 cflag |= CREAD;
 
-        tty->termios->c_cflag = cflag;
+        tty->termios.c_cflag = cflag;
         if (tty->ops->set_termios)
                 tty->ops->set_termios(tty, &old_termios);
         mutex_unlock(&tty->termios_mutex);
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 62f30b46fa42..605a4baa9b7b 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1107,7 +1107,6 @@ static void _hso_serial_set_termios(struct tty_struct *tty,
                                     struct ktermios *old)
 {
         struct hso_serial *serial = tty->driver_data;
-        struct ktermios *termios;
 
         if (!serial) {
                 printk(KERN_ERR "%s: no tty structures", __func__);
@@ -1119,16 +1118,15 @@ static void _hso_serial_set_termios(struct tty_struct *tty,
         /*
          *      Fix up unsupported bits
          */
-        termios = tty->termios;
-        termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
+        tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
 
-        termios->c_cflag &=
+        tty->termios.c_cflag &=
                 ~(CSIZE         /* no size */
                 | PARENB        /* disable parity bit */
                 | CBAUD         /* clear current baud rate */
                 | CBAUDEX);     /* clear current buad rate */
 
-        termios->c_cflag |= CS8;        /* character size 8 bits */
+        tty->termios.c_cflag |= CS8;    /* character size 8 bits */
 
         /* baud rate 115200 */
         tty_encode_baud_rate(tty, 115200, 115200);
@@ -1425,14 +1423,14 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 
         if (old)
                 D5("Termios called with: cflags new[%d] - old[%d]",
-                   tty->termios->c_cflag, old->c_cflag);
+                   tty->termios.c_cflag, old->c_cflag);
 
         /* the actual setup */
         spin_lock_irqsave(&serial->serial_lock, flags);
         if (serial->port.count)
                 _hso_serial_set_termios(tty, old);
         else
-                tty->termios = old;
+                tty->termios = *old;
         spin_unlock_irqrestore(&serial->serial_lock, flags);
 
         /* done */
@@ -2289,9 +2287,11 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
         if (minor < 0)
                 goto exit;
 
+        tty_port_init(&serial->port);
+
         /* register our minor number */
-        serial->parent->dev = tty_register_device(tty_drv, minor,
-                                        &serial->parent->interface->dev);
+        serial->parent->dev = tty_port_register_device(&serial->port, tty_drv,
+                        minor, &serial->parent->interface->dev);
         dev = serial->parent->dev;
         dev_set_drvdata(dev, serial->parent);
         i = device_create_file(dev, &dev_attr_hsotype);
@@ -2300,7 +2300,6 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
         serial->minor = minor;
         serial->magic = HSO_SERIAL_MAGIC;
         spin_lock_init(&serial->serial_lock);
-        tty_port_init(&serial->port);
         serial->num_rx_urbs = num_urbs;
 
         /* RX, allocate urb and initialize */
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 5d6de380e42b..352f96180bc7 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -271,6 +271,7 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base,
         if (!parport_SPP_supported (p)) {
                 /* No port. */
                 kfree (priv);
+                kfree(ops);
                 return NULL;
         }
         parport_PS2_supported (p);
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index e9c32274df3f..1631eeaf440e 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -62,6 +62,7 @@ enum parport_pc_pci_cards {
         timedia_9079a,
         timedia_9079b,
         timedia_9079c,
+        wch_ch353_2s1p,
 };
 
 /* each element directly indexed from enum list, above */
@@ -145,6 +146,7 @@ static struct parport_pc_pci cards[] __devinitdata = {
         /* timedia_9079a */             { 1, { { 2, 3 }, } },
         /* timedia_9079b */             { 1, { { 2, 3 }, } },
         /* timedia_9079c */             { 1, { { 2, 3 }, } },
+        /* wch_ch353_2s1p*/             { 1, { { 2, -1}, } },
 };
 
 static struct pci_device_id parport_serial_pci_tbl[] = {
@@ -243,7 +245,8 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
         { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
         { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
         { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
-
+        /* WCH CARDS */
+        { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
         { 0, } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
@@ -460,6 +463,12 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
                 .base_baud      = 921600,
                 .uart_offset    = 8,
         },
+        [wch_ch353_2s1p] = {
+                .flags          = FL_BASE0|FL_BASE_BARS,
+                .num_ports      = 2,
+                .base_baud      = 115200,
+                .uart_offset    = 8,
+        },
 };
 
 struct parport_serial_private {
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 6c0116d48c74..9ffb6d5f17aa 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -716,10 +716,17 @@ static int raw3215_probe (struct ccw_device *cdev)
 static void raw3215_remove (struct ccw_device *cdev)
 {
         struct raw3215_info *raw;
+        unsigned int line;
 
         ccw_device_set_offline(cdev);
         raw = dev_get_drvdata(&cdev->dev);
         if (raw) {
+                spin_lock(&raw3215_device_lock);
+                for (line = 0; line < NR_3215; line++)
+                        if (raw3215[line] == raw)
+                                break;
+                raw3215[line] = NULL;
+                spin_unlock(&raw3215_device_lock);
                 dev_set_drvdata(&cdev->dev, NULL);
                 raw3215_free_info(raw);
         }
@@ -935,6 +942,19 @@ static int __init con3215_init(void)
 console_initcall(con3215_init);
 #endif
 
+static int tty3215_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+        struct raw3215_info *raw;
+
+        raw = raw3215[tty->index];
+        if (raw == NULL)
+                return -ENODEV;
+
+        tty->driver_data = raw;
+
+        return tty_port_install(&raw->port, driver, tty);
+}
+
 /*
  * tty3215_open
  *
@@ -942,14 +962,9 @@ console_initcall(con3215_init);
  */
 static int tty3215_open(struct tty_struct *tty, struct file * filp)
 {
-        struct raw3215_info *raw;
+        struct raw3215_info *raw = tty->driver_data;
         int retval;
 
-        raw = raw3215[tty->index];
-        if (raw == NULL)
-                return -ENODEV;
-
-        tty->driver_data = raw;
         tty_port_tty_set(&raw->port, tty);
 
         tty->low_latency = 0;  /* don't use bottom half for pushing chars */
@@ -1110,6 +1125,7 @@ static void tty3215_start(struct tty_struct *tty)
 }
 
 static const struct tty_operations tty3215_ops = {
+        .install = tty3215_install,
         .open = tty3215_open,
         .close = tty3215_close,
         .write = tty3215_write,
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 0792c85baafe..30ec09e3d037 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -567,6 +567,7 @@ sclp_tty_init(void)
         driver->init_termios.c_lflag = ISIG | ECHO;
         driver->flags = TTY_DRIVER_REAL_RAW;
         tty_set_operations(driver, &sclp_ops);
+        tty_port_link_device(&sclp_port, driver, 0);
         rc = tty_register_driver(driver);
         if (rc) {
                 put_tty_driver(driver);
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index edfc0fd73dc6..7e60f3d2f3f9 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -691,6 +691,7 @@ static int __init sclp_vt220_tty_init(void)
         driver->init_termios = tty_std_termios;
         driver->flags = TTY_DRIVER_REAL_RAW;
         tty_set_operations(driver, &sclp_vt220_ops);
+        tty_port_link_device(&sclp_vt220_port, driver, 0);
 
         rc = tty_register_driver(driver);
         if (rc)
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 1928f3458d10..482ee028f842 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -842,17 +842,14 @@ static struct raw3270_fn tty3270_fn = {
 };
 
 /*
- * This routine is called whenever a 3270 tty is opened.
+ * This routine is called whenever a 3270 tty is opened first time.
  */
-static int
-tty3270_open(struct tty_struct *tty, struct file * filp)
+static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty)
 {
         struct raw3270_view *view;
         struct tty3270 *tp;
         int i, rc;
 
-        if (tty->count > 1)
-                return 0;
         /* Check if the tty3270 is already there. */
         view = raw3270_find_view(&tty3270_fn,
                                   tty->index + RAW3270_FIRSTMINOR);
@@ -865,7 +862,7 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
                 /* why to reassign? */
                 tty_port_tty_set(&tp->port, tty);
                 tp->inattr = TF_INPUT;
-                return 0;
+                return tty_port_install(&tp->port, driver, tty);
         }
         if (tty3270_max_index < tty->index + 1)
                 tty3270_max_index = tty->index + 1;
@@ -895,7 +892,6 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 
         tty_port_tty_set(&tp->port, tty);
         tty->low_latency = 0;
-        tty->driver_data = tp;
         tty->winsize.ws_row = tp->view.rows - 2;
         tty->winsize.ws_col = tp->view.cols;
 
@@ -915,6 +911,15 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
         kbd_ascebc(tp->kbd, tp->view.ascebc);
 
         raw3270_activate_view(&tp->view);
+
+        rc = tty_port_install(&tp->port, driver, tty);
+        if (rc) {
+                raw3270_put_view(&tp->view);
+                return rc;
+        }
+
+        tty->driver_data = tp;
+
         return 0;
 }
 
@@ -932,10 +937,17 @@ tty3270_close(struct tty_struct *tty, struct file * filp)
         if (tp) {
                 tty->driver_data = NULL;
                 tty_port_tty_set(&tp->port, NULL);
-                raw3270_put_view(&tp->view);
         }
 }
 
+static void tty3270_cleanup(struct tty_struct *tty)
+{
+        struct tty3270 *tp = tty->driver_data;
+
+        if (tp)
+                raw3270_put_view(&tp->view);
+}
+
 /*
  * We always have room.
  */
@@ -1737,7 +1749,8 @@ static long tty3270_compat_ioctl(struct tty_struct *tty,
 #endif
 
 static const struct tty_operations tty3270_ops = {
-        .open = tty3270_open,
+        .install = tty3270_install,
+        .cleanup = tty3270_cleanup,
         .close = tty3270_close,
         .write = tty3270_write,
         .put_char = tty3270_put_char,
@@ -1781,7 +1794,7 @@ static int __init tty3270_init(void)
         driver->type = TTY_DRIVER_TYPE_SYSTEM;
         driver->subtype = SYSTEM_TYPE_TTY;
         driver->init_termios = tty_std_termios;
-        driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_DYNAMIC_DEV;
+        driver->flags = TTY_DRIVER_RESET_TERMIOS;
         tty_set_operations(driver, &tty3270_ops);
         ret = tty_register_driver(driver);
         if (ret) {
@@ -1800,6 +1813,7 @@ tty3270_exit(void)
         driver = tty3270_driver;
         tty3270_driver = NULL;
         tty_unregister_driver(driver);
+        put_tty_driver(driver);
         tty3270_del_views();
 }
 
diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c
index fd0e30132ca2..a68d981c259f 100644
--- a/drivers/staging/ipack/devices/ipoctal.c
+++ b/drivers/staging/ipack/devices/ipoctal.c
@@ -502,7 +502,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
                 ipoctal->pointer_read[i] = 0;
                 ipoctal->pointer_write[i] = 0;
                 ipoctal->nb_bytes[i] = 0;
-                tty_register_device(tty, i, NULL);
+                tty_port_register_device(&ipoctal->tty_port[i], tty, i, NULL);
 
                 /*
                  * Enable again the RX. TX will be enabled when
@@ -617,7 +617,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
         struct ipoctal *ipoctal = tty->driver_data;
         speed_t baud;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         /* Disable and reset everything before change the setup */
         ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
@@ -643,7 +643,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
         default:
                 mr1 |= MR1_CHRL_8_BITS;
                 /* By default, select CS8 */
-                tty->termios->c_cflag = (cflag & ~CSIZE) | CS8;
+                tty->termios.c_cflag = (cflag & ~CSIZE) | CS8;
                 break;
         }
 
@@ -657,7 +657,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
                 mr1 |= MR1_PARITY_OFF;
 
         /* Mark or space parity is not supported */
-        tty->termios->c_cflag &= ~CMSPAR;
+        tty->termios.c_cflag &= ~CMSPAR;
 
         /* Set stop bits */
         if (cflag & CSTOPB)
@@ -690,10 +690,10 @@ static void ipoctal_set_termios(struct tty_struct *tty,
         }
 
         baud = tty_get_baud_rate(tty);
-        tty_termios_encode_baud_rate(tty->termios, baud, baud);
+        tty_termios_encode_baud_rate(&tty->termios, baud, baud);
 
         /* Set baud rate */
-        switch (tty->termios->c_ospeed) {
+        switch (baud) {
         case 75:
                 csr |= TX_CLK_75 | RX_CLK_75;
                 break;
@@ -734,7 +734,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
         default:
                 csr |= TX_CLK_38400 | RX_CLK_38400;
                 /* In case of default, we establish 38400 bps */
-                tty_termios_encode_baud_rate(tty->termios, 38400, 38400);
+                tty_termios_encode_baud_rate(&tty->termios, 38400, 38400);
                 break;
         }
 
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 8a362f7af379..c90de969be8f 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -315,10 +315,8 @@ static void qt_read_bulk_callback(struct urb *urb)
         }
 
         tty = tty_port_tty_get(&port->port);
-        if (!tty) {
-                dbg("%s - bad tty pointer - exiting", __func__);
+        if (!tty)
                 return;
-        }
 
         data = urb->transfer_buffer;
 
@@ -364,7 +362,7 @@ static void qt_read_bulk_callback(struct urb *urb)
                 goto exit;
         }
 
-        if (tty && RxCount) {
+        if (RxCount) {
                 flag_data = 0;
                 for (i = 0; i < RxCount; ++i) {
                         /* Look ahead code here */
@@ -428,7 +426,7 @@ static void qt_read_bulk_callback(struct urb *urb)
                 dbg("%s - failed resubmitting read urb, error %d",
                     __func__, result);
         else {
-                if (tty && RxCount) {
+                if (RxCount) {
                         tty_flip_buffer_push(tty);
                         tty_schedule_flip(tty);
                 }
@@ -897,8 +895,6 @@ static int qt_open(struct tty_struct *tty,
          * Put this here to make it responsive to stty and defaults set by
          * the tty layer
          */
-        /* FIXME: is this needed? */
-        /* qt_set_termios(tty, port, NULL); */
 
         /*  Check to see if we've set up our endpoint info yet */
         if (port0->open_ports == 1) {
@@ -1195,7 +1191,7 @@ static void qt_set_termios(struct tty_struct *tty,
                            struct usb_serial_port *port,
                            struct ktermios *old_termios)
 {
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         unsigned char new_LCR = 0;
         unsigned int cflag = termios->c_cflag;
         unsigned int index;
@@ -1204,7 +1200,7 @@ static void qt_set_termios(struct tty_struct *tty,
 
         index = tty->index - port->serial->minor;
 
-        switch (cflag) {
+        switch (cflag & CSIZE) {
         case CS5:
                 new_LCR |= SERIAL_5_DATA;
                 break;
@@ -1215,6 +1211,8 @@ static void qt_set_termios(struct tty_struct *tty,
                 new_LCR |= SERIAL_7_DATA;
                 break;
         default:
+                termios->c_cflag &= ~CSIZE;
+                termios->c_cflag |= CS8;
         case CS8:
                 new_LCR |= SERIAL_8_DATA;
                 break;
@@ -1301,7 +1299,7 @@ static void qt_set_termios(struct tty_struct *tty,
                         dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
 
         }
-        tty->termios->c_cflag &= ~CMSPAR;
+        termios->c_cflag &= ~CMSPAR;
         /* FIXME: Error cases should be returning the actual bits changed only */
 }
 
diff --git a/drivers/staging/speakup/serialio.h b/drivers/staging/speakup/serialio.h
index 614271f9b99f..55d68b5ad165 100644
--- a/drivers/staging/speakup/serialio.h
+++ b/drivers/staging/speakup/serialio.h
@@ -1,8 +1,7 @@
 #ifndef _SPEAKUP_SERIAL_H
 #define _SPEAKUP_SERIAL_H
 
-#include <linux/serial.h>       /* for rs_table, serial constants &
-                                   serial_uart_config */
+#include <linux/serial.h>       /* for rs_table, serial constants */
 #include <linux/serial_reg.h>   /* for more serial constants */
 #ifndef __sparc__
 #include <asm/serial.h>
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 6cc4358f68c1..42d0a2581a87 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -420,7 +420,7 @@ static void check_modem_status(struct serial_state *info)
                                 tty_hangup(port->tty);
                 }
         }
-        if (port->flags & ASYNC_CTS_FLOW) {
+        if (tty_port_cts_enabled(port)) {
                 if (port->tty->hw_stopped) {
                         if (!(status & SER_CTS)) {
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
@@ -646,7 +646,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
         custom.adkcon = AC_UARTBRK;
         mb();
 
-        if (tty->termios->c_cflag & HUPCL)
+        if (tty->termios.c_cflag & HUPCL)
                 info->MCR &= ~(SER_DTR|SER_RTS);
         rtsdtr_ctrl(info->MCR);
 
@@ -670,7 +670,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
         int     bits;
         unsigned long   flags;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         /* Byte size is always 8 bits plus parity bit if requested */
 
@@ -707,8 +707,8 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
         /* If the quotient is zero refuse the change */
         if (!quot && old_termios) {
                 /* FIXME: Will need updating for new tty in the end */
-                tty->termios->c_cflag &= ~CBAUD;
-                tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
+                tty->termios.c_cflag &= ~CBAUD;
+                tty->termios.c_cflag |= (old_termios->c_cflag & CBAUD);
                 baud = tty_get_baud_rate(tty);
                 if (!baud)
                         baud = 9600;
@@ -984,7 +984,7 @@ static void rs_throttle(struct tty_struct * tty)
         if (I_IXOFF(tty))
                 rs_send_xchar(tty, STOP_CHAR(tty));
 
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 info->MCR &= ~SER_RTS;
 
         local_irq_save(flags);
@@ -1012,7 +1012,7 @@ static void rs_unthrottle(struct tty_struct * tty)
                 else
                         rs_send_xchar(tty, START_CHAR(tty));
         }
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 info->MCR |= SER_RTS;
         local_irq_save(flags);
         rtsdtr_ctrl(info->MCR);
@@ -1033,7 +1033,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
         if (!retinfo)
                 return -EFAULT;
         memset(&tmp, 0, sizeof(tmp));
-        tty_lock();
+        tty_lock(tty);
         tmp.line = tty->index;
         tmp.port = state->port;
         tmp.flags = state->tport.flags;
@@ -1042,7 +1042,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
         tmp.close_delay = state->tport.close_delay;
         tmp.closing_wait = state->tport.closing_wait;
         tmp.custom_divisor = state->custom_divisor;
-        tty_unlock();
+        tty_unlock(tty);
         if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
                 return -EFAULT;
         return 0;
@@ -1059,12 +1059,12 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
         if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
                 return -EFAULT;
 
-        tty_lock();
+        tty_lock(tty);
         change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) ||
                 new_serial.custom_divisor != state->custom_divisor;
         if (new_serial.irq || new_serial.port != state->port ||
                         new_serial.xmit_fifo_size != state->xmit_fifo_size) {
-                tty_unlock();
+                tty_unlock(tty);
                 return -EINVAL;
         }
   
@@ -1074,7 +1074,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
                     (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
                     ((new_serial.flags & ~ASYNC_USR_MASK) !=
                      (port->flags & ~ASYNC_USR_MASK))) {
-                        tty_unlock();
+                        tty_unlock(tty);
                         return -EPERM;
                 }
                 port->flags = ((port->flags & ~ASYNC_USR_MASK) |
@@ -1084,7 +1084,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
         }
 
         if (new_serial.baud_base < 9600) {
-                tty_unlock();
+                tty_unlock(tty);
                 return -EINVAL;
         }
 
@@ -1116,7 +1116,7 @@ check_and_exit:
                 }
         } else
                 retval = startup(tty, state);
-        tty_unlock();
+        tty_unlock(tty);
         return retval;
 }
 
@@ -1330,7 +1330,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
         struct serial_state *info = tty->driver_data;
         unsigned long flags;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
 
         change_speed(tty, info, old_termios);
 
@@ -1347,7 +1347,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
         if (!(old_termios->c_cflag & CBAUD) &&
             (cflag & CBAUD)) {
                 info->MCR |= SER_DTR;
-                if (!(tty->termios->c_cflag & CRTSCTS) || 
+                if (!(tty->termios.c_cflag & CRTSCTS) || 
                     !test_bit(TTY_THROTTLED, &tty->flags)) {
                         info->MCR |= SER_RTS;
                 }
@@ -1358,7 +1358,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle turning off CRTSCTS */
         if ((old_termios->c_cflag & CRTSCTS) &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 rs_start(tty);
         }
@@ -1371,7 +1371,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
          * or not.  Hence, this may change.....
          */
         if (!(old_termios->c_cflag & CLOCAL) &&
-            (tty->termios->c_cflag & CLOCAL))
+            (tty->termios.c_cflag & CLOCAL))
                 wake_up_interruptible(&info->open_wait);
 #endif
 }
@@ -1710,10 +1710,6 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
         serial_driver->flags = TTY_DRIVER_REAL_RAW;
         tty_set_operations(serial_driver, &serial_ops);
 
-        error = tty_register_driver(serial_driver);
-        if (error)
-                goto fail_put_tty_driver;
-
         state = rs_table;
         state->port = (int)&custom.serdatr; /* Just to give it a value */
         state->custom_divisor = 0;
@@ -1724,6 +1720,11 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
         state->icount.overrun = state->icount.brk = 0;
         tty_port_init(&state->tport);
         state->tport.ops = &amiga_port_ops;
+        tty_port_link_device(&state->tport, serial_driver, 0);
+
+        error = tty_register_driver(serial_driver);
+        if (error)
+                goto fail_put_tty_driver;
 
         printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n");
 
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 61fc74fe1747..02b7d3a09696 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -263,6 +263,7 @@ static int __init bfin_jc_init(void)
         bfin_jc_driver->subtype      = SERIAL_TYPE_NORMAL;
         bfin_jc_driver->init_termios = tty_std_termios;
         tty_set_operations(bfin_jc_driver, &bfin_jc_ops);
+        tty_port_link_device(&port, bfin_jc_driver, 0);
 
         ret = tty_register_driver(bfin_jc_driver);
         if (ret)
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index e61cabdd69df..0a6a0bc1b598 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -727,7 +727,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
                 else
                         tty_hangup(tty);
         }
-        if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
+        if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) {
                 if (tty->hw_stopped) {
                         if (mdm_status & CyCTS) {
                                 /* cy_start isn't used
@@ -1459,7 +1459,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
                         info->port.xmit_buf = NULL;
                         free_page((unsigned long)temp);
                 }
-                if (tty->termios->c_cflag & HUPCL)
+                if (tty->termios.c_cflag & HUPCL)
                         cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
 
                 cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
@@ -1488,7 +1488,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
                         free_page((unsigned long)temp);
                 }
 
-                if (tty->termios->c_cflag & HUPCL)
+                if (tty->termios.c_cflag & HUPCL)
                         tty_port_lower_dtr_rts(&info->port);
 
                 set_bit(TTY_IO_ERROR, &tty->flags);
@@ -1599,7 +1599,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
          * If the port is the middle of closing, bail out now
          */
         if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
-                wait_event_interruptible_tty(info->port.close_wait,
+                wait_event_interruptible_tty(tty, info->port.close_wait,
                                 !(info->port.flags & ASYNC_CLOSING));
                 return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
         }
@@ -1999,14 +1999,11 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
         int baud, baud_rate = 0;
         int i;
 
-        if (!tty->termios) /* XXX can this happen at all? */
-                return;
-
         if (info->line == -1)
                 return;
 
-        cflag = tty->termios->c_cflag;
-        iflag = tty->termios->c_iflag;
+        cflag = tty->termios.c_cflag;
+        iflag = tty->termios.c_iflag;
 
         /*
          * Set up the tty->alt_speed kludge
@@ -2825,7 +2822,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
         cy_set_line_char(info, tty);
 
         if ((old_termios->c_cflag & CRTSCTS) &&
-                        !(tty->termios->c_cflag & CRTSCTS)) {
+                        !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 cy_start(tty);
         }
@@ -2837,7 +2834,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
          * or not.  Hence, this may change.....
          */
         if (!(old_termios->c_cflag & CLOCAL) &&
-            (tty->termios->c_cflag & CLOCAL))
+            (tty->termios.c_cflag & CLOCAL))
                 wake_up_interruptible(&info->port.open_wait);
 #endif
 }                               /* cy_set_termios */
@@ -2899,7 +2896,7 @@ static void cy_throttle(struct tty_struct *tty)
                         info->throttle = 1;
         }
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 if (!cy_is_Z(card)) {
                         spin_lock_irqsave(&card->card_lock, flags);
                         cyy_change_rts_dtr(info, 0, TIOCM_RTS);
@@ -2938,7 +2935,7 @@ static void cy_unthrottle(struct tty_struct *tty)
                         cy_send_xchar(tty, START_CHAR(tty));
         }
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 card = info->card;
                 if (!cy_is_Z(card)) {
                         spin_lock_irqsave(&card->card_lock, flags);
@@ -3289,9 +3286,10 @@ static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
 static int __init cy_detect_isa(void)
 {
 #ifdef CONFIG_ISA
+        struct cyclades_card *card;
         unsigned short cy_isa_irq, nboard;
         void __iomem *cy_isa_address;
-        unsigned short i, j, cy_isa_nchan;
+        unsigned short i, j, k, cy_isa_nchan;
         int isparam = 0;
 
         nboard = 0;
@@ -3349,7 +3347,8 @@ static int __init cy_detect_isa(void)
                 }
                 /* fill the next cy_card structure available */
                 for (j = 0; j < NR_CARDS; j++) {
-                        if (cy_card[j].base_addr == NULL)
+                        card = &cy_card[j];
+                        if (card->base_addr == NULL)
                                 break;
                 }
                 if (j == NR_CARDS) {    /* no more cy_cards available */
@@ -3363,7 +3362,7 @@ static int __init cy_detect_isa(void)
 
                 /* allocate IRQ */
                 if (request_irq(cy_isa_irq, cyy_interrupt,
-                                0, "Cyclom-Y", &cy_card[j])) {
+                                0, "Cyclom-Y", card)) {
                         printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
                                 "could not allocate IRQ#%d.\n",
                                 (unsigned long)cy_isa_address, cy_isa_irq);
@@ -3372,16 +3371,16 @@ static int __init cy_detect_isa(void)
                 }
 
                 /* set cy_card */
-                cy_card[j].base_addr = cy_isa_address;
-                cy_card[j].ctl_addr.p9050 = NULL;
-                cy_card[j].irq = (int)cy_isa_irq;
-                cy_card[j].bus_index = 0;
-                cy_card[j].first_line = cy_next_channel;
-                cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
-                cy_card[j].nports = cy_isa_nchan;
-                if (cy_init_card(&cy_card[j])) {
-                        cy_card[j].base_addr = NULL;
-                        free_irq(cy_isa_irq, &cy_card[j]);
+                card->base_addr = cy_isa_address;
+                card->ctl_addr.p9050 = NULL;
+                card->irq = (int)cy_isa_irq;
+                card->bus_index = 0;
+                card->first_line = cy_next_channel;
+                card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+                card->nports = cy_isa_nchan;
+                if (cy_init_card(card)) {
+                        card->base_addr = NULL;
+                        free_irq(cy_isa_irq, card);
                         iounmap(cy_isa_address);
                         continue;
                 }
@@ -3393,9 +3392,10 @@ static int __init cy_detect_isa(void)
                         (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
                         cy_isa_irq, cy_isa_nchan, cy_next_channel);
 
-                for (j = cy_next_channel;
-                                j < cy_next_channel + cy_isa_nchan; j++)
-                        tty_register_device(cy_serial_driver, j, NULL);
+                for (k = 0, j = cy_next_channel;
+                                j < cy_next_channel + cy_isa_nchan; j++, k++)
+                        tty_port_register_device(&card->ports[k].port,
+                                        cy_serial_driver, j, NULL);
                 cy_next_channel += cy_isa_nchan;
         }
         return nboard;
@@ -3695,10 +3695,11 @@ err:
 static int __devinit cy_pci_probe(struct pci_dev *pdev,
                 const struct pci_device_id *ent)
 {
+        struct cyclades_card *card;
         void __iomem *addr0 = NULL, *addr2 = NULL;
         char *card_name = NULL;
         u32 uninitialized_var(mailbox);
-        unsigned int device_id, nchan = 0, card_no, i;
+        unsigned int device_id, nchan = 0, card_no, i, j;
         unsigned char plx_ver;
         int retval, irq;
 
@@ -3829,7 +3830,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
         }
         /* fill the next cy_card structure available */
         for (card_no = 0; card_no < NR_CARDS; card_no++) {
-                if (cy_card[card_no].base_addr == NULL)
+                card = &cy_card[card_no];
+                if (card->base_addr == NULL)
                         break;
         }
         if (card_no == NR_CARDS) {      /* no more cy_cards available */
@@ -3843,27 +3845,26 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
                         device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
                 /* allocate IRQ */
                 retval = request_irq(irq, cyy_interrupt,
-                                IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]);
+                                IRQF_SHARED, "Cyclom-Y", card);
                 if (retval) {
                         dev_err(&pdev->dev, "could not allocate IRQ\n");
                         goto err_unmap;
                 }
-                cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
+                card->num_chips = nchan / CyPORTS_PER_CHIP;
         } else {
                 struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
                 struct ZFW_CTRL __iomem *zfw_ctrl;
 
                 zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
 
-                cy_card[card_no].hw_ver = mailbox;
-                cy_card[card_no].num_chips = (unsigned int)-1;
-                cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
+                card->hw_ver = mailbox;
+                card->num_chips = (unsigned int)-1;
+                card->board_ctrl = &zfw_ctrl->board_ctrl;
 #ifdef CONFIG_CYZ_INTR
                 /* allocate IRQ only if board has an IRQ */
                 if (irq != 0 && irq != 255) {
                         retval = request_irq(irq, cyz_interrupt,
-                                        IRQF_SHARED, "Cyclades-Z",
-                                        &cy_card[card_no]);
+                                        IRQF_SHARED, "Cyclades-Z", card);
                         if (retval) {
                                 dev_err(&pdev->dev, "could not allocate IRQ\n");
                                 goto err_unmap;
@@ -3873,17 +3874,17 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
         }
 
         /* set cy_card */
-        cy_card[card_no].base_addr = addr2;
-        cy_card[card_no].ctl_addr.p9050 = addr0;
-        cy_card[card_no].irq = irq;
-        cy_card[card_no].bus_index = 1;
-        cy_card[card_no].first_line = cy_next_channel;
-        cy_card[card_no].nports = nchan;
-        retval = cy_init_card(&cy_card[card_no]);
+        card->base_addr = addr2;
+        card->ctl_addr.p9050 = addr0;
+        card->irq = irq;
+        card->bus_index = 1;
+        card->first_line = cy_next_channel;
+        card->nports = nchan;
+        retval = cy_init_card(card);
         if (retval)
                 goto err_null;
 
-        pci_set_drvdata(pdev, &cy_card[card_no]);
+        pci_set_drvdata(pdev, card);
 
         if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
                         device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
@@ -3909,14 +3910,15 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 
         dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
                 "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel);
-        for (i = cy_next_channel; i < cy_next_channel + nchan; i++)
-                tty_register_device(cy_serial_driver, i, &pdev->dev);
+        for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++)
+                tty_port_register_device(&card->ports[j].port,
+                                cy_serial_driver, i, &pdev->dev);
         cy_next_channel += nchan;
 
         return 0;
 err_null:
-        cy_card[card_no].base_addr = NULL;
-        free_irq(irq, &cy_card[card_no]);
+        card->base_addr = NULL;
+        free_irq(irq, card);
 err_unmap:
         iounmap(addr0);
         if (addr2)
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 4813684cb634..4ab936b7aac6 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -738,16 +738,17 @@ static int __devinit ehv_bc_tty_probe(struct platform_device *pdev)
                 goto error;
         }
 
-        bc->dev = tty_register_device(ehv_bc_driver, i, &pdev->dev);
+        tty_port_init(&bc->port);
+        bc->port.ops = &ehv_bc_tty_port_ops;
+
+        bc->dev = tty_port_register_device(&bc->port, ehv_bc_driver, i,
+                        &pdev->dev);
         if (IS_ERR(bc->dev)) {
                 ret = PTR_ERR(bc->dev);
                 dev_err(&pdev->dev, "could not register tty (ret=%i)\n", ret);
                 goto error;
         }
 
-        tty_port_init(&bc->port);
-        bc->port.ops = &ehv_bc_tty_port_ops;
-
         dev_set_drvdata(&pdev->dev, bc);
 
         dev_info(&pdev->dev, "registered /dev/%s%u for byte channel %u\n",
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 2d691eb7c40a..7f80f15681cd 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -299,20 +299,33 @@ static void hvc_unthrottle(struct tty_struct *tty)
         hvc_kick();
 }
 
+static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+        struct hvc_struct *hp;
+        int rc;
+
+        /* Auto increments kref reference if found. */
+        if (!(hp = hvc_get_by_index(tty->index)))
+                return -ENODEV;
+
+        tty->driver_data = hp;
+
+        rc = tty_port_install(&hp->port, driver, tty);
+        if (rc)
+                tty_port_put(&hp->port);
+        return rc;
+}
+
 /*
  * The TTY interface won't be used until after the vio layer has exposed the vty
  * adapter to the kernel.
  */
 static int hvc_open(struct tty_struct *tty, struct file * filp)
 {
-        struct hvc_struct *hp;
+        struct hvc_struct *hp = tty->driver_data;
         unsigned long flags;
         int rc = 0;
 
-        /* Auto increments kref reference if found. */
-        if (!(hp = hvc_get_by_index(tty->index)))
-                return -ENODEV;
-
         spin_lock_irqsave(&hp->port.lock, flags);
         /* Check and then increment for fast path open. */
         if (hp->port.count++ > 0) {
@@ -322,7 +335,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
         } /* else count == 0 */
         spin_unlock_irqrestore(&hp->port.lock, flags);
 
-        tty->driver_data = hp;
         tty_port_tty_set(&hp->port, tty);
 
         if (hp->ops->notifier_add)
@@ -389,6 +401,11 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
                                 hp->vtermno, hp->port.count);
                 spin_unlock_irqrestore(&hp->port.lock, flags);
         }
+}
+
+static void hvc_cleanup(struct tty_struct *tty)
+{
+        struct hvc_struct *hp = tty->driver_data;
 
         tty_port_put(&hp->port);
 }
@@ -792,8 +809,10 @@ static void hvc_poll_put_char(struct tty_driver *driver, int line, char ch)
 #endif
 
 static const struct tty_operations hvc_ops = {
+        .install = hvc_install,
         .open = hvc_open,
         .close = hvc_close,
+        .cleanup = hvc_cleanup,
         .write = hvc_write,
         .hangup = hvc_hangup,
         .unthrottle = hvc_unthrottle,
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index d56788c83974..cab5c7adf8e8 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1102,27 +1102,20 @@ static struct hvcs_struct *hvcs_get_by_index(int index)
         return NULL;
 }
 
-/*
- * This is invoked via the tty_open interface when a user app connects to the
- * /dev node.
- */
-static int hvcs_open(struct tty_struct *tty, struct file *filp)
+static int hvcs_install(struct tty_driver *driver, struct tty_struct *tty)
 {
         struct hvcs_struct *hvcsd;
-        int rc, retval = 0;
-        unsigned long flags;
-        unsigned int irq;
         struct vio_dev *vdev;
-        unsigned long unit_address;
-
-        if (tty->driver_data)
-                goto fast_open;
+        unsigned long unit_address, flags;
+        unsigned int irq;
+        int retval;
 
         /*
          * Is there a vty-server that shares the same index?
          * This function increments the kref index.
          */
-        if (!(hvcsd = hvcs_get_by_index(tty->index))) {
+        hvcsd = hvcs_get_by_index(tty->index);
+        if (!hvcsd) {
                 printk(KERN_WARNING "HVCS: open failed, no device associated"
                                 " with tty->index %d.\n", tty->index);
                 return -ENODEV;
@@ -1130,11 +1123,16 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
 
         spin_lock_irqsave(&hvcsd->lock, flags);
 
-        if (hvcsd->connected == 0)
-                if ((retval = hvcs_partner_connect(hvcsd)))
-                        goto error_release;
+        if (hvcsd->connected == 0) {
+                retval = hvcs_partner_connect(hvcsd);
+                if (retval) {
+                        spin_unlock_irqrestore(&hvcsd->lock, flags);
+                        printk(KERN_WARNING "HVCS: partner connect failed.\n");
+                        goto err_put;
+                }
+        }
 
-        hvcsd->port.count = 1;
+        hvcsd->port.count = 0;
         hvcsd->port.tty = tty;
         tty->driver_data = hvcsd;
 
@@ -1155,37 +1153,48 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
          * This must be done outside of the spinlock because it requests irqs
          * and will grab the spinlock and free the connection if it fails.
          */
-        if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
-                tty_port_put(&hvcsd->port);
+        retval = hvcs_enable_device(hvcsd, unit_address, irq, vdev);
+        if (retval) {
                 printk(KERN_WARNING "HVCS: enable device failed.\n");
-                return rc;
+                goto err_put;
         }
 
-        goto open_success;
+        retval = tty_port_install(&hvcsd->port, driver, tty);
+        if (retval)
+                goto err_irq;
 
-fast_open:
-        hvcsd = tty->driver_data;
+        return 0;
+err_irq:
+        spin_lock_irqsave(&hvcsd->lock, flags);
+        vio_disable_interrupts(hvcsd->vdev);
+        spin_unlock_irqrestore(&hvcsd->lock, flags);
+        free_irq(irq, hvcsd);
+err_put:
+        tty_port_put(&hvcsd->port);
+
+        return retval;
+}
+
+/*
+ * This is invoked via the tty_open interface when a user app connects to the
+ * /dev node.
+ */
+static int hvcs_open(struct tty_struct *tty, struct file *filp)
+{
+        struct hvcs_struct *hvcsd = tty->driver_data;
+        unsigned long flags;
 
         spin_lock_irqsave(&hvcsd->lock, flags);
-        tty_port_get(&hvcsd->port);
         hvcsd->port.count++;
         hvcsd->todo_mask |= HVCS_SCHED_READ;
         spin_unlock_irqrestore(&hvcsd->lock, flags);
 
-open_success:
         hvcs_kick();
 
         printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n",
                 hvcsd->vdev->unit_address );
 
         return 0;
-
-error_release:
-        spin_unlock_irqrestore(&hvcsd->lock, flags);
-        tty_port_put(&hvcsd->port);
-
-        printk(KERN_WARNING "HVCS: partner connect failed.\n");
-        return retval;
 }
 
 static void hvcs_close(struct tty_struct *tty, struct file *filp)
@@ -1236,7 +1245,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
                 tty->driver_data = NULL;
 
                 free_irq(irq, hvcsd);
-                tty_port_put(&hvcsd->port);
                 return;
         } else if (hvcsd->port.count < 0) {
                 printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
@@ -1245,6 +1253,12 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
         }
 
         spin_unlock_irqrestore(&hvcsd->lock, flags);
+}
+
+static void hvcs_cleanup(struct tty_struct * tty)
+{
+        struct hvcs_struct *hvcsd = tty->driver_data;
+
         tty_port_put(&hvcsd->port);
 }
 
@@ -1431,8 +1445,10 @@ static int hvcs_chars_in_buffer(struct tty_struct *tty)
 }
 
 static const struct tty_operations hvcs_ops = {
+        .install = hvcs_install,
         .open = hvcs_open,
         .close = hvcs_close,
+        .cleanup = hvcs_cleanup,
         .hangup = hvcs_hangup,
         .write = hvcs_write,
         .write_room = hvcs_write_room,
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 6f5bc49c441f..0083bc1f63f4 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1080,6 +1080,8 @@ static int __init hvsi_init(void)
                 struct hvsi_struct *hp = &hvsi_ports[i];
                 int ret = 1;
 
+                tty_port_link_device(&hp->port, hvsi_driver, i);
+
                 ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp);
                 if (ret)
                         printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index 59c135dd5d20..3396eb9d57a3 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -400,7 +400,7 @@ void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp)
                 spin_unlock_irqrestore(&hp->lock, flags);
 
                 /* Clear our own DTR */
-                if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL))
+                if (!pv->tty || (pv->tty->termios.c_cflag & HUPCL))
                         hvsilib_write_mctrl(pv, 0);
 
                 /* Tear down the connection */
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index f8b5fa0093a3..160f0ad9589d 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -476,7 +476,7 @@ static int add_tty(int j,
         mutex_init(&ttys[j]->ipw_tty_mutex);
         tty_port_init(&ttys[j]->port);
 
-        tty_register_device(ipw_tty_driver, j, NULL);
+        tty_port_register_device(&ttys[j]->port, ipw_tty_driver, j, NULL);
         ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
 
         if (secondary_channel_idx != -1)
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index e1235accab74..d7492e183607 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -600,7 +600,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                                         port->status &= ~ISI_DCD;
                         }
 
-                        if (port->port.flags & ASYNC_CTS_FLOW) {
+                        if (tty_port_cts_enabled(&port->port)) {
                                 if (tty->hw_stopped) {
                                         if (header & ISI_CTS) {
                                                 port->port.tty->hw_stopped = 0;
@@ -702,7 +702,7 @@ static void isicom_config_port(struct tty_struct *tty)
 
                 /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
                 if (baud < 1 || baud > 4)
-                        tty->termios->c_cflag &= ~CBAUDEX;
+                        tty->termios.c_cflag &= ~CBAUDEX;
                 else
                         baud += 15;
         }
@@ -1196,8 +1196,8 @@ static void isicom_set_termios(struct tty_struct *tty,
         if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
                 return;
 
-        if (tty->termios->c_cflag == old_termios->c_cflag &&
-                        tty->termios->c_iflag == old_termios->c_iflag)
+        if (tty->termios.c_cflag == old_termios->c_cflag &&
+                        tty->termios.c_iflag == old_termios->c_iflag)
                 return;
 
         spin_lock_irqsave(&port->card->card_lock, flags);
@@ -1205,7 +1205,7 @@ static void isicom_set_termios(struct tty_struct *tty,
         spin_unlock_irqrestore(&port->card->card_lock, flags);
 
         if ((old_termios->c_cflag & CRTSCTS) &&
-                        !(tty->termios->c_cflag & CRTSCTS)) {
+                        !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 isicom_start(tty);
         }
@@ -1611,7 +1611,8 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
                 goto errunri;
 
         for (index = 0; index < board->port_count; index++)
-                tty_register_device(isicom_normal, board->index * 16 + index,
+                tty_port_register_device(&board->ports[index].port,
+                                isicom_normal, board->index * 16 + index,
                                 &pdev->dev);
 
         return 0;
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 324467d28a54..56e616b9109a 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -169,6 +169,7 @@ static DEFINE_SPINLOCK(moxa_lock);
 static unsigned long baseaddr[MAX_BOARDS];
 static unsigned int type[MAX_BOARDS];
 static unsigned int numports[MAX_BOARDS];
+static struct tty_port moxa_service_port;
 
 MODULE_AUTHOR("William Chen");
 MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
@@ -367,10 +368,10 @@ static int moxa_ioctl(struct tty_struct *tty,
                                         tmp.dcd = 1;
 
                                 ttyp = tty_port_tty_get(&p->port);
-                                if (!ttyp || !ttyp->termios)
+                                if (!ttyp)
                                         tmp.cflag = p->cflag;
                                 else
-                                        tmp.cflag = ttyp->termios->c_cflag;
+                                        tmp.cflag = ttyp->termios.c_cflag;
                                 tty_kref_put(ttyp);
 copy:
                                 if (copy_to_user(argm, &tmp, sizeof(tmp)))
@@ -834,7 +835,7 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
         const struct firmware *fw;
         const char *file;
         struct moxa_port *p;
-        unsigned int i;
+        unsigned int i, first_idx;
         int ret;
 
         brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
@@ -887,6 +888,11 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
                 mod_timer(&moxaTimer, jiffies + HZ / 50);
         spin_unlock_bh(&moxa_lock);
 
+        first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+        for (i = 0; i < brd->numPorts; i++)
+                tty_port_register_device(&brd->ports[i].port, moxaDriver,
+                                first_idx + i, dev);
+
         return 0;
 err_free:
         kfree(brd->ports);
@@ -896,7 +902,7 @@ err:
 
 static void moxa_board_deinit(struct moxa_board_conf *brd)
 {
-        unsigned int a, opened;
+        unsigned int a, opened, first_idx;
 
         mutex_lock(&moxa_openlock);
         spin_lock_bh(&moxa_lock);
@@ -925,6 +931,10 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
                 mutex_lock(&moxa_openlock);
         }
 
+        first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+        for (a = 0; a < brd->numPorts; a++)
+                tty_unregister_device(moxaDriver, first_idx + a);
+
         iounmap(brd->basemem);
         brd->basemem = NULL;
         kfree(brd->ports);
@@ -967,6 +977,7 @@ static int __devinit moxa_pci_probe(struct pci_dev *pdev,
         board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
         if (board->basemem == NULL) {
                 dev_err(&pdev->dev, "can't remap io space 2\n");
+                retval = -ENOMEM;
                 goto err_reg;
         }
 
@@ -1031,9 +1042,14 @@ static int __init moxa_init(void)
 
         printk(KERN_INFO "MOXA Intellio family driver version %s\n",
                         MOXA_VERSION);
-        moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
-        if (!moxaDriver)
-                return -ENOMEM;
+
+        tty_port_init(&moxa_service_port);
+
+        moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
+                        TTY_DRIVER_REAL_RAW |
+                        TTY_DRIVER_DYNAMIC_DEV);
+        if (IS_ERR(moxaDriver))
+                return PTR_ERR(moxaDriver);
 
         moxaDriver->name = "ttyMX";
         moxaDriver->major = ttymajor;
@@ -1044,8 +1060,9 @@ static int __init moxa_init(void)
         moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
         moxaDriver->init_termios.c_ispeed = 9600;
         moxaDriver->init_termios.c_ospeed = 9600;
-        moxaDriver->flags = TTY_DRIVER_REAL_RAW;
         tty_set_operations(moxaDriver, &moxa_ops);
+        /* Having one more port only for ioctls is ugly */
+        tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
 
         if (tty_register_driver(moxaDriver)) {
                 printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
@@ -1178,7 +1195,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
         mutex_lock(&ch->port.mutex);
         if (!(ch->port.flags & ASYNC_INITIALIZED)) {
                 ch->statusflags = 0;
-                moxa_set_tty_param(tty, tty->termios);
+                moxa_set_tty_param(tty, &tty->termios);
                 MoxaPortLineCtrl(ch, 1, 1);
                 MoxaPortEnable(ch);
                 MoxaSetFifo(ch, ch->type == PORT_16550A);
@@ -1193,7 +1210,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
 static void moxa_close(struct tty_struct *tty, struct file *filp)
 {
         struct moxa_port *ch = tty->driver_data;
-        ch->cflag = tty->termios->c_cflag;
+        ch->cflag = tty->termios.c_cflag;
         tty_port_close(&ch->port, tty, filp);
 }
 
@@ -1464,7 +1481,7 @@ static void moxa_poll(unsigned long ignored)
 
 static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
 {
-        register struct ktermios *ts = tty->termios;
+        register struct ktermios *ts = &tty->termios;
         struct moxa_port *ch = tty->driver_data;
         int rts, cts, txflow, rxflow, xany, baud;
 
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 90cc680c4f0e..cfda47dabd28 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -643,7 +643,7 @@ static int mxser_change_speed(struct tty_struct *tty,
         int ret = 0;
         unsigned char status;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
         if (!info->ioaddr)
                 return ret;
 
@@ -830,7 +830,7 @@ static void mxser_check_modem_status(struct tty_struct *tty,
                         wake_up_interruptible(&port->port.open_wait);
         }
 
-        if (port->port.flags & ASYNC_CTS_FLOW) {
+        if (tty_port_cts_enabled(&port->port)) {
                 if (tty->hw_stopped) {
                         if (status & UART_MSR_CTS) {
                                 tty->hw_stopped = 0;
@@ -1520,10 +1520,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
                                 
                                 tty = tty_port_tty_get(port);
 
-                                if (!tty || !tty->termios)
+                                if (!tty)
                                         ms.cflag = ip->normal_termios.c_cflag;
                                 else
-                                        ms.cflag = tty->termios->c_cflag;
+                                        ms.cflag = tty->termios.c_cflag;
                                 tty_kref_put(tty);
                                 spin_lock_irq(&ip->slock);
                                 status = inb(ip->ioaddr + UART_MSR);
@@ -1589,13 +1589,13 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
                                 tty = tty_port_tty_get(&ip->port);
 
-                                if (!tty || !tty->termios) {
+                                if (!tty) {
                                         cflag = ip->normal_termios.c_cflag;
                                         iflag = ip->normal_termios.c_iflag;
                                         me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
                                 } else {
-                                        cflag = tty->termios->c_cflag;
-                                        iflag = tty->termios->c_iflag;
+                                        cflag = tty->termios.c_cflag;
+                                        iflag = tty->termios.c_iflag;
                                         me->baudrate[p] = tty_get_baud_rate(tty);
                                 }
                                 tty_kref_put(tty);
@@ -1853,7 +1853,7 @@ static void mxser_stoprx(struct tty_struct *tty)
                 }
         }
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 info->MCR &= ~UART_MCR_RTS;
                 outb(info->MCR, info->ioaddr + UART_MCR);
         }
@@ -1890,7 +1890,7 @@ static void mxser_unthrottle(struct tty_struct *tty)
                 }
         }
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 info->MCR |= UART_MCR_RTS;
                 outb(info->MCR, info->ioaddr + UART_MCR);
         }
@@ -1939,14 +1939,14 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
         spin_unlock_irqrestore(&info->slock, flags);
 
         if ((old_termios->c_cflag & CRTSCTS) &&
-                        !(tty->termios->c_cflag & CRTSCTS)) {
+                        !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 mxser_start(tty);
         }
 
         /* Handle sw stopped */
         if ((old_termios->c_iflag & IXON) &&
-                        !(tty->termios->c_iflag & IXON)) {
+                        !(tty->termios.c_iflag & IXON)) {
                 tty->stopped = 0;
 
                 if (info->board->chip_flag) {
@@ -2337,11 +2337,36 @@ static struct tty_port_operations mxser_port_ops = {
  * The MOXA Smartio/Industio serial driver boot-time initialization code!
  */
 
+static bool allow_overlapping_vector;
+module_param(allow_overlapping_vector, bool, S_IRUGO);
+MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)");
+
+static bool mxser_overlapping_vector(struct mxser_board *brd)
+{
+        return allow_overlapping_vector &&
+                brd->vector >= brd->ports[0].ioaddr &&
+                brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports;
+}
+
+static int mxser_request_vector(struct mxser_board *brd)
+{
+        if (mxser_overlapping_vector(brd))
+                return 0;
+        return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO;
+}
+
+static void mxser_release_vector(struct mxser_board *brd)
+{
+        if (mxser_overlapping_vector(brd))
+                return;
+        release_region(brd->vector, 1);
+}
+
 static void mxser_release_ISA_res(struct mxser_board *brd)
 {
         free_irq(brd->irq, brd);
         release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-        release_region(brd->vector, 1);
+        mxser_release_vector(brd);
 }
 
 static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2396,7 +2421,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 
 static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 {
-        int id, i, bits;
+        int id, i, bits, ret;
         unsigned short regs[16], irq;
         unsigned char scratch, scratch2;
 
@@ -2492,13 +2517,15 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
                                 8 * brd->info->nports - 1);
                 return -EIO;
         }
-        if (!request_region(brd->vector, 1, "mxser(vector)")) {
+
+        ret = mxser_request_vector(brd);
+        if (ret) {
                 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
                 printk(KERN_ERR "mxser: can't request interrupt vector region: "
                                 "0x%.8lx-0x%.8lx\n",
                                 brd->ports[0].ioaddr, brd->ports[0].ioaddr +
                                 8 * brd->info->nports - 1);
-                return -EIO;
+                return ret;
         }
         return brd->info->nports;
 
@@ -2598,7 +2625,8 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
                 goto err_rel3;
 
         for (i = 0; i < brd->info->nports; i++)
-                tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
+                tty_port_register_device(&brd->ports[i].port, mxvar_sdriver,
+                                brd->idx + i, &pdev->dev);
 
         pci_set_drvdata(pdev, brd);
 
@@ -2695,7 +2723,8 @@ static int __init mxser_module_init(void)
 
                 brd->idx = m * MXSER_PORTS_PER_BOARD;
                 for (i = 0; i < brd->info->nports; i++)
-                        tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
+                        tty_port_register_device(&brd->ports[i].port,
+                                        mxvar_sdriver, brd->idx + i, NULL);
 
                 m++;
         }
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c43b683b6eb8..3e210a430fb3 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -108,7 +108,7 @@ struct gsm_mux_net {
  */
 
 struct gsm_msg {
-        struct gsm_msg *next;
+        struct list_head list;
         u8 addr;                /* DLCI address + flags */
         u8 ctrl;                /* Control byte + flags */
         unsigned int len;       /* Length of data block (can be zero) */
@@ -245,8 +245,7 @@ struct gsm_mux {
         unsigned int tx_bytes;          /* TX data outstanding */
 #define TX_THRESH_HI            8192
 #define TX_THRESH_LO            2048
-        struct gsm_msg *tx_head;        /* Pending data packets */
-        struct gsm_msg *tx_tail;
+        struct list_head tx_list;       /* Pending data packets */
 
         /* Control messages */
         struct timer_list t2_timer;     /* Retransmit timer for commands */
@@ -663,7 +662,7 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
         m->len = len;
         m->addr = addr;
         m->ctrl = ctrl;
-        m->next = NULL;
+        INIT_LIST_HEAD(&m->list);
         return m;
 }
 
@@ -673,22 +672,21 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
  *
  *      The tty device has called us to indicate that room has appeared in
  *      the transmit queue. Ram more data into the pipe if we have any
+ *      If we have been flow-stopped by a CMD_FCOFF, then we can only
+ *      send messages on DLCI0 until CMD_FCON
  *
  *      FIXME: lock against link layer control transmissions
  */
 
 static void gsm_data_kick(struct gsm_mux *gsm)
 {
-        struct gsm_msg *msg = gsm->tx_head;
+        struct gsm_msg *msg, *nmsg;
         int len;
         int skip_sof = 0;
 
-        /* FIXME: We need to apply this solely to data messages */
-        if (gsm->constipated)
-                return;
-
-        while (gsm->tx_head != NULL) {
-                msg = gsm->tx_head;
+        list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) {
+                if (gsm->constipated && msg->addr)
+                        continue;
                 if (gsm->encoding != 0) {
                         gsm->txframe[0] = GSM1_SOF;
                         len = gsm_stuff_frame(msg->data,
@@ -711,14 +709,13 @@ static void gsm_data_kick(struct gsm_mux *gsm)
                                                 len - skip_sof) < 0)
                         break;
                 /* FIXME: Can eliminate one SOF in many more cases */
-                gsm->tx_head = msg->next;
-                if (gsm->tx_head == NULL)
-                        gsm->tx_tail = NULL;
                 gsm->tx_bytes -= msg->len;
-                kfree(msg);
                 /* For a burst of frames skip the extra SOF within the
                    burst */
                 skip_sof = 1;
+
+                list_del(&msg->list);
+                kfree(msg);
         }
 }
 
@@ -768,11 +765,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
         msg->data = dp;
 
         /* Add to the actual output queue */
-        if (gsm->tx_tail)
-                gsm->tx_tail->next = msg;
-        else
-                gsm->tx_head = msg;
-        gsm->tx_tail = msg;
+        list_add_tail(&msg->list, &gsm->tx_list);
         gsm->tx_bytes += msg->len;
         gsm_data_kick(gsm);
 }
@@ -875,7 +868,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
 
         /* dlci->skb is locked by tx_lock */
         if (dlci->skb == NULL) {
-                dlci->skb = skb_dequeue(&dlci->skb_list);
+                dlci->skb = skb_dequeue_tail(&dlci->skb_list);
                 if (dlci->skb == NULL)
                         return 0;
                 first = 1;
@@ -886,7 +879,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
         if (len > gsm->mtu) {
                 if (dlci->adaption == 3) {
                         /* Over long frame, bin it */
-                        kfree_skb(dlci->skb);
+                        dev_kfree_skb_any(dlci->skb);
                         dlci->skb = NULL;
                         return 0;
                 }
@@ -899,8 +892,11 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
 
         /* FIXME: need a timer or something to kick this so it can't
            get stuck with no work outstanding and no buffer free */
-        if (msg == NULL)
+        if (msg == NULL) {
+                skb_queue_tail(&dlci->skb_list, dlci->skb);
+                dlci->skb = NULL;
                 return -ENOMEM;
+        }
         dp = msg->data;
 
         if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
@@ -912,7 +908,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
         skb_pull(dlci->skb, len);
         __gsm_data_queue(dlci, msg);
         if (last) {
-                kfree_skb(dlci->skb);
+                dev_kfree_skb_any(dlci->skb);
                 dlci->skb = NULL;
         }
         return size;
@@ -971,16 +967,22 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
 static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
 {
         unsigned long flags;
+        int sweep;
+
+        if (dlci->constipated) 
+                return;
 
         spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
         /* If we have nothing running then we need to fire up */
+        sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
         if (dlci->gsm->tx_bytes == 0) {
                 if (dlci->net)
                         gsm_dlci_data_output_framed(dlci->gsm, dlci);
                 else
                         gsm_dlci_data_output(dlci->gsm, dlci);
-        } else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
-                gsm_dlci_data_sweep(dlci->gsm);
+        }
+        if (sweep)
+                gsm_dlci_data_sweep(dlci->gsm);
         spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
 }
 
@@ -1027,6 +1029,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
 {
         int  mlines = 0;
         u8 brk = 0;
+        int fc;
 
         /* The modem status command can either contain one octet (v.24 signals)
            or two octets (v.24 signals + break signals). The length field will
@@ -1038,19 +1041,21 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
         else {
                 brk = modem & 0x7f;
                 modem = (modem >> 7) & 0x7f;
-        };
+        }
 
         /* Flow control/ready to communicate */
-        if (modem & MDM_FC) {
+        fc = (modem & MDM_FC) || !(modem & MDM_RTR);
+        if (fc && !dlci->constipated) {
                 /* Need to throttle our output on this device */
                 dlci->constipated = 1;
-        }
-        if (modem & MDM_RTC) {
-                mlines |= TIOCM_DSR | TIOCM_DTR;
+        } else if (!fc && dlci->constipated) {
                 dlci->constipated = 0;
                 gsm_dlci_data_kick(dlci);
         }
+
         /* Map modem bits */
+        if (modem & MDM_RTC)
+                mlines |= TIOCM_DSR | TIOCM_DTR;
         if (modem & MDM_RTR)
                 mlines |= TIOCM_RTS | TIOCM_CTS;
         if (modem & MDM_IC)
@@ -1061,7 +1066,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
         /* Carrier drop -> hangup */
         if (tty) {
                 if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
-                        if (!(tty->termios->c_cflag & CLOCAL))
+                        if (!(tty->termios.c_cflag & CLOCAL))
                                 tty_hangup(tty);
                 if (brk & 0x01)
                         tty_insert_flip_char(tty, 0, TTY_BREAK);
@@ -1190,6 +1195,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
                                                         u8 *data, int clen)
 {
         u8 buf[1];
+        unsigned long flags;
+
         switch (command) {
         case CMD_CLD: {
                 struct gsm_dlci *dlci = gsm->dlci[0];
@@ -1206,16 +1213,18 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
                 gsm_control_reply(gsm, CMD_TEST, data, clen);
                 break;
         case CMD_FCON:
-                /* Modem wants us to STFU */
-                gsm->constipated = 1;
-                gsm_control_reply(gsm, CMD_FCON, NULL, 0);
-                break;
-        case CMD_FCOFF:
                 /* Modem can accept data again */
                 gsm->constipated = 0;
-                gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
+                gsm_control_reply(gsm, CMD_FCON, NULL, 0);
                 /* Kick the link in case it is idling */
+                spin_lock_irqsave(&gsm->tx_lock, flags);
                 gsm_data_kick(gsm);
+                spin_unlock_irqrestore(&gsm->tx_lock, flags);
+                break;
+        case CMD_FCOFF:
+                /* Modem wants us to STFU */
+                gsm->constipated = 1;
+                gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
                 break;
         case CMD_MSC:
                 /* Out of band modem line change indicator for a DLCI */
@@ -1668,7 +1677,7 @@ static void gsm_dlci_free(struct kref *ref)
         dlci->gsm->dlci[dlci->addr] = NULL;
         kfifo_free(dlci->fifo);
         while ((dlci->skb = skb_dequeue(&dlci->skb_list)))
-                kfree_skb(dlci->skb);
+                dev_kfree_skb(dlci->skb);
         kfree(dlci);
 }
 
@@ -2007,7 +2016,7 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
 {
         int i;
         struct gsm_dlci *dlci = gsm->dlci[0];
-        struct gsm_msg *txq;
+        struct gsm_msg *txq, *ntxq;
         struct gsm_control *gc;
 
         gsm->dead = 1;
@@ -2042,11 +2051,9 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
                 if (gsm->dlci[i])
                         gsm_dlci_release(gsm->dlci[i]);
         /* Now wipe the queues */
-        for (txq = gsm->tx_head; txq != NULL; txq = gsm->tx_head) {
-                gsm->tx_head = txq->next;
+        list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
                 kfree(txq);
-        }
-        gsm->tx_tail = NULL;
+        INIT_LIST_HEAD(&gsm->tx_list);
 }
 EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
 
@@ -2157,6 +2164,7 @@ struct gsm_mux *gsm_alloc_mux(void)
         }
         spin_lock_init(&gsm->lock);
         kref_init(&gsm->ref);
+        INIT_LIST_HEAD(&gsm->tx_list);
 
         gsm->t1 = T1;
         gsm->t2 = T2;
@@ -2273,7 +2281,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
                         gsm->error(gsm, *dp, flags);
                         break;
                 default:
-                        WARN_ONCE("%s: unknown flag %d\n",
+                        WARN_ONCE(1, "%s: unknown flag %d\n",
                                tty_name(tty, buf), flags);
                         break;
                 }
@@ -2377,12 +2385,12 @@ static void gsmld_write_wakeup(struct tty_struct *tty)
 
         /* Queue poll */
         clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+        spin_lock_irqsave(&gsm->tx_lock, flags);
         gsm_data_kick(gsm);
         if (gsm->tx_bytes < TX_THRESH_LO) {
-                spin_lock_irqsave(&gsm->tx_lock, flags);
                 gsm_dlci_data_sweep(gsm);
-                spin_unlock_irqrestore(&gsm->tx_lock, flags);
         }
+        spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**
@@ -2868,14 +2876,14 @@ static const struct tty_port_operations gsm_port_ops = {
         .dtr_rts = gsm_dtr_rts,
 };
 
-
-static int gsmtty_open(struct tty_struct *tty, struct file *filp)
+static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
 {
         struct gsm_mux *gsm;
         struct gsm_dlci *dlci;
-        struct tty_port *port;
         unsigned int line = tty->index;
         unsigned int mux = line >> 6;
+        bool alloc = false;
+        int ret;
 
         line = line & 0x3F;
 
@@ -2889,14 +2897,35 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
         gsm = gsm_mux[mux];
         if (gsm->dead)
                 return -EL2HLT;
+        /* If DLCI 0 is not yet fully open return an error. This is ok from a locking
+           perspective as we don't have to worry about this if DLCI0 is lost */
+        if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) 
+                return -EL2NSYNC;
         dlci = gsm->dlci[line];
-        if (dlci == NULL)
+        if (dlci == NULL) {
+                alloc = true;
                 dlci = gsm_dlci_alloc(gsm, line);
+        }
         if (dlci == NULL)
                 return -ENOMEM;
-        port = &dlci->port;
-        port->count++;
+        ret = tty_port_install(&dlci->port, driver, tty);
+        if (ret) {
+                if (alloc)
+                        dlci_put(dlci);
+                return ret;
+        }
+
         tty->driver_data = dlci;
+
+        return 0;
+}
+
+static int gsmtty_open(struct tty_struct *tty, struct file *filp)
+{
+        struct gsm_dlci *dlci = tty->driver_data;
+        struct tty_port *port = &dlci->port;
+
+        port->count++;
         dlci_get(dlci);
         dlci_get(dlci->gsm->dlci[0]);
         mux_get(dlci->gsm);
@@ -3043,13 +3072,13 @@ static void gsmtty_set_termios(struct tty_struct *tty, struct ktermios *old)
            the RPN control message. This however rapidly gets nasty as we
            then have to remap modem signals each way according to whether
            our virtual cable is null modem etc .. */
-        tty_termios_copy_hw(tty->termios, old);
+        tty_termios_copy_hw(&tty->termios, old);
 }
 
 static void gsmtty_throttle(struct tty_struct *tty)
 {
         struct gsm_dlci *dlci = tty->driver_data;
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 dlci->modem_tx &= ~TIOCM_DTR;
         dlci->throttled = 1;
         /* Send an MSC with DTR cleared */
@@ -3059,7 +3088,7 @@ static void gsmtty_throttle(struct tty_struct *tty)
 static void gsmtty_unthrottle(struct tty_struct *tty)
 {
         struct gsm_dlci *dlci = tty->driver_data;
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 dlci->modem_tx |= TIOCM_DTR;
         dlci->throttled = 0;
         /* Send an MSC with DTR set */
@@ -3085,6 +3114,7 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state)
 
 /* Virtual ttys for the demux */
 static const struct tty_operations gsmtty_ops = {
+        .install                = gsmtty_install,
         .open                   = gsmtty_open,
         .close                  = gsmtty_close,
         .write                  = gsmtty_write,
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 5c6c31459a2f..1e6405070ce6 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1065,7 +1065,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 
         TRACE_L("read()");
 
-        tty_lock();
+        tty_lock(tty);
 
         pClient = findClient(pInfo, task_pid(current));
         if (pClient) {
@@ -1077,7 +1077,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
                                 goto unlock;
                         }
                         /* block until there is a message: */
-                        wait_event_interruptible_tty(pInfo->read_wait,
+                        wait_event_interruptible_tty(tty, pInfo->read_wait,
                                         (pMsg = remove_msg(pInfo, pClient)));
                 }
 
@@ -1107,7 +1107,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
         }
         ret = -EPERM;
 unlock:
-        tty_unlock();
+        tty_unlock(tty);
         return ret;
 }
 
@@ -1156,7 +1156,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
         pHeader->locks = 0;
         pHeader->owner = NULL;
 
-        tty_lock();
+        tty_lock(tty);
 
         pClient = findClient(pInfo, task_pid(current));
         if (pClient) {
@@ -1175,7 +1175,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
         add_tx_queue(pInfo, pHeader);
         trigger_transmit(pInfo);
 
-        tty_unlock();
+        tty_unlock(tty);
 
         return 0;
 }
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ee1c268f5f9d..8c0b7b42319c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -92,10 +92,18 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 
 static void n_tty_set_room(struct tty_struct *tty)
 {
-        /* tty->read_cnt is not read locked ? */
-        int     left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+        int left;
         int old_left;
 
+        /* tty->read_cnt is not read locked ? */
+        if (I_PARMRK(tty)) {
+                /* Multiply read_cnt by 3, since each byte might take up to
+                 * three times as many spaces when PARMRK is set (depending on
+                 * its flags, e.g. parity error). */
+                left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+        } else
+                left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+
         /*
          * If we are doing input canonicalization, and there are no
          * pending newlines, let characters through without limit, so
@@ -1432,6 +1440,12 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
          */
         if (tty->receive_room < TTY_THRESHOLD_THROTTLE)
                 tty_throttle(tty);
+
+        /* FIXME: there is a tiny race here if the receive room check runs
+           before the other work executes and empties the buffer (upping
+           the receiving room and unthrottling. We then throttle and get
+           stuck. This has been observed and traced down by Vincent Pillet/
+           We need to address this when we sort out out the rx path locking */
 }
 
 int is_ignored(int sig)
@@ -1460,7 +1474,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
         BUG_ON(!tty);
 
         if (old)
-                canon_change = (old->c_lflag ^ tty->termios->c_lflag) & ICANON;
+                canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
         if (canon_change) {
                 memset(&tty->read_flags, 0, sizeof tty->read_flags);
                 tty->canon_head = tty->read_tail;
@@ -1728,7 +1742,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 
 do_it_again:
 
-        BUG_ON(!tty->read_buf);
+        if (WARN_ON(!tty->read_buf))
+                return -EAGAIN;
 
         c = job_control(tty, file);
         if (c < 0)
@@ -1832,13 +1847,13 @@ do_it_again:
 
                 if (tty->icanon && !L_EXTPROC(tty)) {
                         /* N.B. avoid overrun if nr == 0 */
+                        spin_lock_irqsave(&tty->read_lock, flags);
                         while (nr && tty->read_cnt) {
                                 int eol;
 
                                 eol = test_and_clear_bit(tty->read_tail,
                                                 tty->read_flags);
                                 c = tty->read_buf[tty->read_tail];
-                                spin_lock_irqsave(&tty->read_lock, flags);
                                 tty->read_tail = ((tty->read_tail+1) &
                                                   (N_TTY_BUF_SIZE-1));
                                 tty->read_cnt--;
@@ -1856,15 +1871,19 @@ do_it_again:
                                         if (tty_put_user(tty, c, b++)) {
                                                 retval = -EFAULT;
                                                 b--;
+                                                spin_lock_irqsave(&tty->read_lock, flags);
                                                 break;
                                         }
                                         nr--;
                                 }
                                 if (eol) {
                                         tty_audit_push(tty);
+                                        spin_lock_irqsave(&tty->read_lock, flags);
                                         break;
                                 }
+                                spin_lock_irqsave(&tty->read_lock, flags);
                         }
+                        spin_unlock_irqrestore(&tty->read_lock, flags);
                         if (retval)
                                 break;
                 } else {
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index e7592f9037da..b917c9424954 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1473,8 +1473,8 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
                 port->dc = dc;
                 tty_port_init(&port->port);
                 port->port.ops = &noz_tty_port_ops;
-                tty_dev = tty_register_device(ntty_driver, dc->index_start + i,
-                                                        &pdev->dev);
+                tty_dev = tty_port_register_device(&port->port, ntty_driver,
+                                dc->index_start + i, &pdev->dev);
 
                 if (IS_ERR(tty_dev)) {
                         ret = PTR_ERR(tty_dev);
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 5505ffc91da4..2bace847eb39 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -47,6 +47,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
         wake_up_interruptible(&tty->read_wait);
         wake_up_interruptible(&tty->write_wait);
         tty->packet = 0;
+        /* Review - krefs on tty_link ?? */
         if (!tty->link)
                 return;
         tty->link->packet = 0;
@@ -62,9 +63,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
                         mutex_unlock(&devpts_mutex);
                 }
 #endif
-                tty_unlock();
+                tty_unlock(tty);
                 tty_vhangup(tty->link);
-                tty_lock();
+                tty_lock(tty);
         }
 }
 
@@ -231,8 +232,8 @@ out:
 static void pty_set_termios(struct tty_struct *tty,
                                         struct ktermios *old_termios)
 {
-        tty->termios->c_cflag &= ~(CSIZE | PARENB);
-        tty->termios->c_cflag |= (CS8 | CREAD);
+        tty->termios.c_cflag &= ~(CSIZE | PARENB);
+        tty->termios.c_cflag |= (CS8 | CREAD);
 }
 
 /**
@@ -282,60 +283,110 @@ done:
         return 0;
 }
 
-/* Traditional BSD devices */
-#ifdef CONFIG_LEGACY_PTYS
-
-static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+/**
+ *      pty_common_install              -       set up the pty pair
+ *      @driver: the pty driver
+ *      @tty: the tty being instantiated
+ *      @bool: legacy, true if this is BSD style
+ *
+ *      Perform the initial set up for the tty/pty pair. Called from the
+ *      tty layer when the port is first opened.
+ *
+ *      Locking: the caller must hold the tty_mutex
+ */
+static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
+                bool legacy)
 {
         struct tty_struct *o_tty;
+        struct tty_port *ports[2];
         int idx = tty->index;
-        int retval;
+        int retval = -ENOMEM;
 
         o_tty = alloc_tty_struct();
         if (!o_tty)
-                return -ENOMEM;
+                goto err;
+        ports[0] = kmalloc(sizeof **ports, GFP_KERNEL);
+        ports[1] = kmalloc(sizeof **ports, GFP_KERNEL);
+        if (!ports[0] || !ports[1])
+                goto err_free_tty;
         if (!try_module_get(driver->other->owner)) {
                 /* This cannot in fact currently happen */
-                retval = -ENOMEM;
                 goto err_free_tty;
         }
         initialize_tty_struct(o_tty, driver->other, idx);
 
-        /* We always use new tty termios data so we can do this
-           the easy way .. */
-        retval = tty_init_termios(tty);
-        if (retval)
-                goto err_deinit_tty;
-
-        retval = tty_init_termios(o_tty);
-        if (retval)
-                goto err_free_termios;
+        if (legacy) {
+                /* We always use new tty termios data so we can do this
+                   the easy way .. */
+                retval = tty_init_termios(tty);
+                if (retval)
+                        goto err_deinit_tty;
+
+                retval = tty_init_termios(o_tty);
+                if (retval)
+                        goto err_free_termios;
+
+                driver->other->ttys[idx] = o_tty;
+                driver->ttys[idx] = tty;
+        } else {
+                memset(&tty->termios_locked, 0, sizeof(tty->termios_locked));
+                tty->termios = driver->init_termios;
+                memset(&o_tty->termios_locked, 0, sizeof(tty->termios_locked));
+                o_tty->termios = driver->other->init_termios;
+        }
 
         /*
          * Everything allocated ... set up the o_tty structure.
          */
-        driver->other->ttys[idx] = o_tty;
         tty_driver_kref_get(driver->other);
         if (driver->subtype == PTY_TYPE_MASTER)
                 o_tty->count++;
         /* Establish the links in both directions */
         tty->link   = o_tty;
         o_tty->link = tty;
+        tty_port_init(ports[0]);
+        tty_port_init(ports[1]);
+        o_tty->port = ports[0];
+        tty->port = ports[1];
 
         tty_driver_kref_get(driver);
         tty->count++;
-        driver->ttys[idx] = tty;
         return 0;
 err_free_termios:
-        tty_free_termios(tty);
+        if (legacy)
+                tty_free_termios(tty);
 err_deinit_tty:
         deinitialize_tty_struct(o_tty);
         module_put(o_tty->driver->owner);
 err_free_tty:
+        kfree(ports[0]);
+        kfree(ports[1]);
         free_tty_struct(o_tty);
+err:
         return retval;
 }
 
+static void pty_cleanup(struct tty_struct *tty)
+{
+        kfree(tty->port);
+}
+
+/* Traditional BSD devices */
+#ifdef CONFIG_LEGACY_PTYS
+
+static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+        return pty_common_install(driver, tty, true);
+}
+
+static void pty_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+        struct tty_struct *pair = tty->link;
+        driver->ttys[tty->index] = NULL;
+        if (pair)
+                pair->driver->ttys[pair->index] = NULL;
+}
+
 static int pty_bsd_ioctl(struct tty_struct *tty,
                          unsigned int cmd, unsigned long arg)
 {
@@ -366,7 +417,9 @@ static const struct tty_operations master_pty_ops_bsd = {
         .unthrottle = pty_unthrottle,
         .set_termios = pty_set_termios,
         .ioctl = pty_bsd_ioctl,
-        .resize = pty_resize
+        .cleanup = pty_cleanup,
+        .resize = pty_resize,
+        .remove = pty_remove
 };
 
 static const struct tty_operations slave_pty_ops_bsd = {
@@ -379,7 +432,9 @@ static const struct tty_operations slave_pty_ops_bsd = {
         .chars_in_buffer = pty_chars_in_buffer,
         .unthrottle = pty_unthrottle,
         .set_termios = pty_set_termios,
-        .resize = pty_resize
+        .cleanup = pty_cleanup,
+        .resize = pty_resize,
+        .remove = pty_remove
 };
 
 static void __init legacy_pty_init(void)
@@ -389,12 +444,18 @@ static void __init legacy_pty_init(void)
         if (legacy_count <= 0)
                 return;
 
-        pty_driver = alloc_tty_driver(legacy_count);
-        if (!pty_driver)
+        pty_driver = tty_alloc_driver(legacy_count,
+                        TTY_DRIVER_RESET_TERMIOS |
+                        TTY_DRIVER_REAL_RAW |
+                        TTY_DRIVER_DYNAMIC_ALLOC);
+        if (IS_ERR(pty_driver))
                 panic("Couldn't allocate pty driver");
 
-        pty_slave_driver = alloc_tty_driver(legacy_count);
-        if (!pty_slave_driver)
+        pty_slave_driver = tty_alloc_driver(legacy_count,
+                        TTY_DRIVER_RESET_TERMIOS |
+                        TTY_DRIVER_REAL_RAW |
+                        TTY_DRIVER_DYNAMIC_ALLOC);
+        if (IS_ERR(pty_slave_driver))
                 panic("Couldn't allocate pty slave driver");
 
         pty_driver->driver_name = "pty_master";
@@ -410,7 +471,6 @@ static void __init legacy_pty_init(void)
         pty_driver->init_termios.c_lflag = 0;
         pty_driver->init_termios.c_ispeed = 38400;
         pty_driver->init_termios.c_ospeed = 38400;
-        pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
         pty_driver->other = pty_slave_driver;
         tty_set_operations(pty_driver, &master_pty_ops_bsd);
 
@@ -424,8 +484,6 @@ static void __init legacy_pty_init(void)
         pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
         pty_slave_driver->init_termios.c_ispeed = 38400;
         pty_slave_driver->init_termios.c_ospeed = 38400;
-        pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
-                                        TTY_DRIVER_REAL_RAW;
         pty_slave_driver->other = pty_driver;
         tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
 
@@ -497,78 +555,22 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
         return tty;
 }
 
-static void pty_unix98_shutdown(struct tty_struct *tty)
-{
-        tty_driver_remove_tty(tty->driver, tty);
-        /* We have our own method as we don't use the tty index */
-        kfree(tty->termios);
-}
-
 /* We have no need to install and remove our tty objects as devpts does all
    the work for us */
 
 static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
 {
-        struct tty_struct *o_tty;
-        int idx = tty->index;
-
-        o_tty = alloc_tty_struct();
-        if (!o_tty)
-                return -ENOMEM;
-        if (!try_module_get(driver->other->owner)) {
-                /* This cannot in fact currently happen */
-                goto err_free_tty;
-        }
-        initialize_tty_struct(o_tty, driver->other, idx);
-
-        tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
-        if (tty->termios == NULL)
-                goto err_free_mem;
-        *tty->termios = driver->init_termios;
-        tty->termios_locked = tty->termios + 1;
-
-        o_tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
-        if (o_tty->termios == NULL)
-                goto err_free_mem;
-        *o_tty->termios = driver->other->init_termios;
-        o_tty->termios_locked = o_tty->termios + 1;
-
-        tty_driver_kref_get(driver->other);
-        if (driver->subtype == PTY_TYPE_MASTER)
-                o_tty->count++;
-        /* Establish the links in both directions */
-        tty->link   = o_tty;
-        o_tty->link = tty;
-        /*
-         * All structures have been allocated, so now we install them.
-         * Failures after this point use release_tty to clean up, so
-         * there's no need to null out the local pointers.
-         */
-        tty_driver_kref_get(driver);
-        tty->count++;
-        return 0;
-err_free_mem:
-        deinitialize_tty_struct(o_tty);
-        kfree(o_tty->termios);
-        kfree(tty->termios);
-        module_put(o_tty->driver->owner);
-err_free_tty:
-        free_tty_struct(o_tty);
-        return -ENOMEM;
-}
-
-static void ptm_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
-{
+        return pty_common_install(driver, tty, false);
 }
 
-static void pts_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
+static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
 {
 }
 
 static const struct tty_operations ptm_unix98_ops = {
         .lookup = ptm_unix98_lookup,
         .install = pty_unix98_install,
-        .remove = ptm_unix98_remove,
+        .remove = pty_unix98_remove,
         .open = pty_open,
         .close = pty_close,
         .write = pty_write,
@@ -578,14 +580,14 @@ static const struct tty_operations ptm_unix98_ops = {
         .unthrottle = pty_unthrottle,
         .set_termios = pty_set_termios,
         .ioctl = pty_unix98_ioctl,
-        .shutdown = pty_unix98_shutdown,
-        .resize = pty_resize
+        .resize = pty_resize,
+        .cleanup = pty_cleanup
 };
 
 static const struct tty_operations pty_unix98_ops = {
         .lookup = pts_unix98_lookup,
         .install = pty_unix98_install,
-        .remove = pts_unix98_remove,
+        .remove = pty_unix98_remove,
         .open = pty_open,
         .close = pty_close,
         .write = pty_write,
@@ -594,7 +596,7 @@ static const struct tty_operations pty_unix98_ops = {
         .chars_in_buffer = pty_chars_in_buffer,
         .unthrottle = pty_unthrottle,
         .set_termios = pty_set_termios,
-        .shutdown = pty_unix98_shutdown
+        .cleanup = pty_cleanup,
 };
 
 /**
@@ -622,26 +624,27 @@ static int ptmx_open(struct inode *inode, struct file *filp)
                 return retval;
 
         /* find a device that is not in use. */
-        tty_lock();
+        mutex_lock(&devpts_mutex);
         index = devpts_new_index(inode);
-        tty_unlock();
         if (index < 0) {
                 retval = index;
                 goto err_file;
         }
 
+        mutex_unlock(&devpts_mutex);
+
         mutex_lock(&tty_mutex);
-        mutex_lock(&devpts_mutex);
         tty = tty_init_dev(ptm_driver, index);
-        mutex_unlock(&devpts_mutex);
-        tty_lock();
-        mutex_unlock(&tty_mutex);
 
         if (IS_ERR(tty)) {
                 retval = PTR_ERR(tty);
                 goto out;
         }
 
+        /* The tty returned here is locked so we can safely
+           drop the mutex */
+        mutex_unlock(&tty_mutex);
+
         set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
 
         tty_add_file(tty, filp);
@@ -654,16 +657,17 @@ static int ptmx_open(struct inode *inode, struct file *filp)
         if (retval)
                 goto err_release;
 
-        tty_unlock();
+        tty_unlock(tty);
         return 0;
 err_release:
-        tty_unlock();
+        tty_unlock(tty);
         tty_release(inode, filp);
         return retval;
 out:
+        mutex_unlock(&tty_mutex);
         devpts_kill_index(inode, index);
-        tty_unlock();
 err_file:
+        mutex_unlock(&devpts_mutex);
         tty_free_file(filp);
         return retval;
 }
@@ -672,11 +676,21 @@ static struct file_operations ptmx_fops;
 
 static void __init unix98_pty_init(void)
 {
-        ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
-        if (!ptm_driver)
+        ptm_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
+                        TTY_DRIVER_RESET_TERMIOS |
+                        TTY_DRIVER_REAL_RAW |
+                        TTY_DRIVER_DYNAMIC_DEV |
+                        TTY_DRIVER_DEVPTS_MEM |
+                        TTY_DRIVER_DYNAMIC_ALLOC);
+        if (IS_ERR(ptm_driver))
                 panic("Couldn't allocate Unix98 ptm driver");
-        pts_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
-        if (!pts_driver)
+        pts_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
+                        TTY_DRIVER_RESET_TERMIOS |
+                        TTY_DRIVER_REAL_RAW |
+                        TTY_DRIVER_DYNAMIC_DEV |
+                        TTY_DRIVER_DEVPTS_MEM |
+                        TTY_DRIVER_DYNAMIC_ALLOC);
+        if (IS_ERR(pts_driver))
                 panic("Couldn't allocate Unix98 pts driver");
 
         ptm_driver->driver_name = "pty_master";
@@ -692,8 +706,6 @@ static void __init unix98_pty_init(void)
         ptm_driver->init_termios.c_lflag = 0;
         ptm_driver->init_termios.c_ispeed = 38400;
         ptm_driver->init_termios.c_ospeed = 38400;
-        ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
-                TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
         ptm_driver->other = pts_driver;
         tty_set_operations(ptm_driver, &ptm_unix98_ops);
 
@@ -707,8 +719,6 @@ static void __init unix98_pty_init(void)
         pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
         pts_driver->init_termios.c_ispeed = 38400;
         pts_driver->init_termios.c_ospeed = 38400;
-        pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
-                TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
         pts_driver->other = ptm_driver;
         tty_set_operations(pts_driver, &pty_unix98_ops);
 
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 777d5f9cf6cc..9700d34b20a3 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -704,8 +704,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
         spin_lock_init(&info->slock);
         mutex_init(&info->write_mtx);
         rp_table[line] = info;
-        tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev :
-                        NULL);
+        tty_port_register_device(&info->port, rocket_driver, line,
+                        pci_dev ? &pci_dev->dev : NULL);
 }
 
 /*
@@ -720,7 +720,7 @@ static void configure_r_port(struct tty_struct *tty, struct r_port *info,
         unsigned rocketMode;
         int bits, baud, divisor;
         CHANNEL_t *cp;
-        struct ktermios *t = tty->termios;
+        struct ktermios *t = &tty->termios;
 
         cp = &info->channel;
         cflag = t->c_cflag;
@@ -978,7 +978,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
                         tty->alt_speed = 460800;
 
                 configure_r_port(tty, info, NULL);
-                if (tty->termios->c_cflag & CBAUD) {
+                if (tty->termios.c_cflag & CBAUD) {
                         sSetDTR(cp);
                         sSetRTS(cp);
                 }
@@ -1089,35 +1089,35 @@ static void rp_set_termios(struct tty_struct *tty,
         if (rocket_paranoia_check(info, "rp_set_termios"))
                 return;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         /*
          * This driver doesn't support CS5 or CS6
          */
         if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
-                tty->termios->c_cflag =
+                tty->termios.c_cflag =
                     ((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
         /* Or CMSPAR */
-        tty->termios->c_cflag &= ~CMSPAR;
+        tty->termios.c_cflag &= ~CMSPAR;
 
         configure_r_port(tty, info, old_termios);
 
         cp = &info->channel;
 
         /* Handle transition to B0 status */
-        if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
+        if ((old_termios->c_cflag & CBAUD) && !(tty->termios.c_cflag & CBAUD)) {
                 sClrDTR(cp);
                 sClrRTS(cp);
         }
 
         /* Handle transition away from B0 status */
-        if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
-                if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
+        if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) {
+                if (!tty->hw_stopped || !(tty->termios.c_cflag & CRTSCTS))
                         sSetRTS(cp);
                 sSetDTR(cp);
         }
 
-        if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
+        if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 rp_start(tty);
         }
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 3ed20e435e59..66c38a3f74ce 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -515,7 +515,7 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
         unsigned cflag;
         int     i;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
         if (!(port = info->port))
                 return;
 
@@ -617,7 +617,7 @@ static void rs_set_ldisc(struct tty_struct *tty)
         if (serial_paranoia_check(info, tty->name, "rs_set_ldisc"))
                 return;
 
-        info->is_cons = (tty->termios->c_line == N_TTY);
+        info->is_cons = (tty->termios.c_line == N_TTY);
         
         printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
 }
@@ -985,7 +985,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
         change_speed(info, tty);
 
         if ((old_termios->c_cflag & CRTSCTS) &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 rs_start(tty);
         }
@@ -1070,7 +1070,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
                 if (tty->ldisc.close)
                         (tty->ldisc.close)(tty);
                 tty->ldisc = ldiscs[N_TTY];
-                tty->termios->c_line = N_TTY;
+                tty->termios.c_line = N_TTY;
                 if (tty->ldisc.open)
                         (tty->ldisc.open)(tty);
         }
@@ -1189,12 +1189,6 @@ rs68328_init(void)
         serial_driver->flags = TTY_DRIVER_REAL_RAW;
         tty_set_operations(serial_driver, &rs_ops);
 
-        if (tty_register_driver(serial_driver)) {
-                put_tty_driver(serial_driver);
-                printk(KERN_ERR "Couldn't register serial driver\n");
-                return -ENOMEM;
-        }
-
         local_irq_save(flags);
 
         for(i=0;i<NR_PORTS;i++) {
@@ -1224,8 +1218,17 @@ rs68328_init(void)
                             0,
                             "M68328_UART", info))
                 panic("Unable to attach 68328 serial interrupt\n");
+
+            tty_port_link_device(&info->tport, serial_driver, i);
         }
         local_irq_restore(flags);
+
+        if (tty_register_driver(serial_driver)) {
+                put_tty_driver(serial_driver);
+                printk(KERN_ERR "Couldn't register serial driver\n");
+                return -ENOMEM;
+        }
+
         return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 8123f784bcda..d4e0b07cb130 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2202,6 +2202,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
         unsigned char cval, fcr = 0;
         unsigned long flags;
         unsigned int baud, quot;
+        int fifo_bug = 0;
 
         switch (termios->c_cflag & CSIZE) {
         case CS5:
@@ -2221,8 +2222,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 
         if (termios->c_cflag & CSTOPB)
                 cval |= UART_LCR_STOP;
-        if (termios->c_cflag & PARENB)
+        if (termios->c_cflag & PARENB) {
                 cval |= UART_LCR_PARITY;
+                if (up->bugs & UART_BUG_PARITY)
+                        fifo_bug = 1;
+        }
         if (!(termios->c_cflag & PARODD))
                 cval |= UART_LCR_EPAR;
 #ifdef CMSPAR
@@ -2246,7 +2250,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 
         if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
                 fcr = uart_config[port->type].fcr;
-                if (baud < 2400) {
+                if (baud < 2400 || fifo_bug) {
                         fcr &= ~UART_FCR_TRIGGER_MASK;
                         fcr |= UART_FCR_TRIGGER_1;
                 }
@@ -2336,7 +2340,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
                         serial_port_out(port, UART_EFR, efr);
         }
 
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
         /* Workaround to enable 115200 baud on OMAP1510 internal ports */
         if (cpu_is_omap1510() && is_omap_port(up)) {
                 if (baud == 115200) {
@@ -2426,7 +2430,7 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
 {
         if (pt->port.iotype == UPIO_AU)
                 return 0x1000;
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
         if (is_omap_port(pt))
                 return 0x16 << pt->port.regshift;
 #endif
@@ -2979,36 +2983,36 @@ void serial8250_resume_port(int line)
 static int __devinit serial8250_probe(struct platform_device *dev)
 {
         struct plat_serial8250_port *p = dev->dev.platform_data;
-        struct uart_port port;
+        struct uart_8250_port uart;
         int ret, i, irqflag = 0;
 
-        memset(&port, 0, sizeof(struct uart_port));
+        memset(&uart, 0, sizeof(uart));
 
         if (share_irqs)
                 irqflag = IRQF_SHARED;
 
         for (i = 0; p && p->flags != 0; p++, i++) {
-                port.iobase             = p->iobase;
-                port.membase            = p->membase;
-                port.irq                = p->irq;
-                port.irqflags           = p->irqflags;
-                port.uartclk            = p->uartclk;
-                port.regshift           = p->regshift;
-                port.iotype             = p->iotype;
-                port.flags              = p->flags;
-                port.mapbase            = p->mapbase;
-                port.hub6               = p->hub6;
-                port.private_data       = p->private_data;
-                port.type               = p->type;
-                port.serial_in          = p->serial_in;
-                port.serial_out         = p->serial_out;
-                port.handle_irq         = p->handle_irq;
-                port.handle_break       = p->handle_break;
-                port.set_termios        = p->set_termios;
-                port.pm                 = p->pm;
-                port.dev                = &dev->dev;
-                port.irqflags           |= irqflag;
-                ret = serial8250_register_port(&port);
+                uart.port.iobase        = p->iobase;
+                uart.port.membase       = p->membase;
+                uart.port.irq           = p->irq;
+                uart.port.irqflags      = p->irqflags;
+                uart.port.uartclk       = p->uartclk;
+                uart.port.regshift      = p->regshift;
+                uart.port.iotype        = p->iotype;
+                uart.port.flags         = p->flags;
+                uart.port.mapbase       = p->mapbase;
+                uart.port.hub6          = p->hub6;
+                uart.port.private_data  = p->private_data;
+                uart.port.type          = p->type;
+                uart.port.serial_in     = p->serial_in;
+                uart.port.serial_out    = p->serial_out;
+                uart.port.handle_irq    = p->handle_irq;
+                uart.port.handle_break  = p->handle_break;
+                uart.port.set_termios   = p->set_termios;
+                uart.port.pm            = p->pm;
+                uart.port.dev           = &dev->dev;
+                uart.port.irqflags      |= irqflag;
+                ret = serial8250_register_8250_port(&uart);
                 if (ret < 0) {
                         dev_err(&dev->dev, "unable to register port at index %d "
                                 "(IO%lx MEM%llx IRQ%d): %d\n", i,
@@ -3081,7 +3085,7 @@ static struct platform_driver serial8250_isa_driver = {
 static struct platform_device *serial8250_isa_devs;
 
 /*
- * serial8250_register_port and serial8250_unregister_port allows for
+ * serial8250_register_8250_port and serial8250_unregister_port allows for
  * 16x50 serial ports to be configured at run-time, to support PCMCIA
  * modems and PCI multiport cards.
  */
@@ -3155,6 +3159,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
                 uart->port.regshift     = up->port.regshift;
                 uart->port.iotype       = up->port.iotype;
                 uart->port.flags        = up->port.flags | UPF_BOOT_AUTOCONF;
+                uart->bugs              = up->bugs;
                 uart->port.mapbase      = up->port.mapbase;
                 uart->port.private_data = up->port.private_data;
                 if (up->port.dev)
@@ -3198,29 +3203,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 EXPORT_SYMBOL(serial8250_register_8250_port);
 
 /**
- *      serial8250_register_port - register a serial port
- *      @port: serial port template
- *
- *      Configure the serial port specified by the request. If the
- *      port exists and is in use, it is hung up and unregistered
- *      first.
- *
- *      The port is then probed and if necessary the IRQ is autodetected
- *      If this fails an error is returned.
- *
- *      On success the port is ready to use and the line number is returned.
- */
-int serial8250_register_port(struct uart_port *port)
-{
-        struct uart_8250_port up;
-
-        memset(&up, 0, sizeof(up));
-        memcpy(&up.port, port, sizeof(*port));
-        return serial8250_register_8250_port(&up);
-}
-EXPORT_SYMBOL(serial8250_register_port);
-
-/**
  *      serial8250_unregister_port - remove a 16x50 serial port at runtime
  *      @line: serial line number
  *
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index f9719d167c8d..0c5e908df0b5 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -13,36 +13,6 @@
 
 #include <linux/serial_8250.h>
 
-struct uart_8250_port {
-        struct uart_port        port;
-        struct timer_list       timer;          /* "no irq" timer */
-        struct list_head        list;           /* ports on this IRQ */
-        unsigned short          capabilities;   /* port capabilities */
-        unsigned short          bugs;           /* port bugs */
-        unsigned int            tx_loadsz;      /* transmit fifo load size */
-        unsigned char           acr;
-        unsigned char           ier;
-        unsigned char           lcr;
-        unsigned char           mcr;
-        unsigned char           mcr_mask;       /* mask of user bits */
-        unsigned char           mcr_force;      /* mask of forced bits */
-        unsigned char           cur_iotype;     /* Running I/O type */
-
-        /*
-         * Some bits in registers are cleared on a read, so they must
-         * be saved whenever the register is read but the bits will not
-         * be immediately processed.
-         */
-#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
-        unsigned char           lsr_saved_flags;
-#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
-        unsigned char           msr_saved_flags;
-
-        /* 8250 specific callbacks */
-        int                     (*dl_read)(struct uart_8250_port *);
-        void                    (*dl_write)(struct uart_8250_port *, int);
-};
-
 struct old_serial_port {
         unsigned int uart;
         unsigned int baud_base;
@@ -56,9 +26,6 @@ struct old_serial_port {
         unsigned long irqflags;
 };
 
-/*
- * This replaces serial_uart_config in include/linux/serial.h
- */
 struct serial8250_config {
         const char      *name;
         unsigned short  fifo_size;
@@ -78,6 +45,7 @@ struct serial8250_config {
 #define UART_BUG_TXEN   (1 << 1)        /* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR  (1 << 2)        /* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE   (1 << 3)        /* UART has buggy THRE reassertion */
+#define UART_BUG_PARITY (1 << 4)        /* UART mishandles parity if FIFO enabled */
 
 #define PROBE_RSA       (1 << 0)
 #define PROBE_ANY       (~0)
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index b0ce8c56f1a4..857498312a9a 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -43,7 +43,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
         struct serial_card_info *info;
         struct serial_card_type *type = id->data;
-        struct uart_port port;
+        struct uart_8250_port uart;
         unsigned long bus_addr;
         unsigned int i;
 
@@ -62,19 +62,19 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
 
         ecard_set_drvdata(ec, info);
 
-        memset(&port, 0, sizeof(struct uart_port));
-        port.irq        = ec->irq;
-        port.flags      = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-        port.uartclk    = type->uartclk;
-        port.iotype     = UPIO_MEM;
-        port.regshift   = 2;
-        port.dev        = &ec->dev;
+        memset(&uart, 0, sizeof(struct uart_8250_port));
+        uart.port.irq   = ec->irq;
+        uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+        uart.port.uartclk       = type->uartclk;
+        uart.port.iotype        = UPIO_MEM;
+        uart.port.regshift      = 2;
+        uart.port.dev   = &ec->dev;
 
         for (i = 0; i < info->num_ports; i ++) {
-                port.membase = info->vaddr + type->offset[i];
-                port.mapbase = bus_addr + type->offset[i];
+                uart.port.membase = info->vaddr + type->offset[i];
+                uart.port.mapbase = bus_addr + type->offset[i];
 
-                info->ports[i] = serial8250_register_port(&port);
+                info->ports[i] = serial8250_register_8250_port(&uart);
         }
 
         return 0;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f574eef3075f..c3b2ec0c8c0b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -89,7 +89,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 
 static int __devinit dw8250_probe(struct platform_device *pdev)
 {
-        struct uart_port port = {};
+        struct uart_8250_port uart = {};
         struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
         struct device_node *np = pdev->dev.of_node;
@@ -104,28 +104,28 @@ static int __devinit dw8250_probe(struct platform_device *pdev)
         data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
         if (!data)
                 return -ENOMEM;
-        port.private_data = data;
-
-        spin_lock_init(&port.lock);
-        port.mapbase = regs->start;
-        port.irq = irq->start;
-        port.handle_irq = dw8250_handle_irq;
-        port.type = PORT_8250;
-        port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+        uart.port.private_data = data;
+
+        spin_lock_init(&uart.port.lock);
+        uart.port.mapbase = regs->start;
+        uart.port.irq = irq->start;
+        uart.port.handle_irq = dw8250_handle_irq;
+        uart.port.type = PORT_8250;
+        uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
                 UPF_FIXED_PORT | UPF_FIXED_TYPE;
-        port.dev = &pdev->dev;
+        uart.port.dev = &pdev->dev;
 
-        port.iotype = UPIO_MEM;
-        port.serial_in = dw8250_serial_in;
-        port.serial_out = dw8250_serial_out;
+        uart.port.iotype = UPIO_MEM;
+        uart.port.serial_in = dw8250_serial_in;
+        uart.port.serial_out = dw8250_serial_out;
         if (!of_property_read_u32(np, "reg-io-width", &val)) {
                 switch (val) {
                 case 1:
                         break;
                 case 4:
-                        port.iotype = UPIO_MEM32;
-                        port.serial_in = dw8250_serial_in32;
-                        port.serial_out = dw8250_serial_out32;
+                        uart.port.iotype = UPIO_MEM32;
+                        uart.port.serial_in = dw8250_serial_in32;
+                        uart.port.serial_out = dw8250_serial_out32;
                         break;
                 default:
                         dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
@@ -135,15 +135,15 @@ static int __devinit dw8250_probe(struct platform_device *pdev)
         }
 
         if (!of_property_read_u32(np, "reg-shift", &val))
-                port.regshift = val;
+                uart.port.regshift = val;
 
         if (of_property_read_u32(np, "clock-frequency", &val)) {
                 dev_err(&pdev->dev, "no clock-frequency property set\n");
                 return -EINVAL;
         }
-        port.uartclk = val;
+        uart.port.uartclk = val;
 
-        data->line = serial8250_register_port(&port);
+        data->line = serial8250_register_8250_port(&uart);
         if (data->line < 0)
                 return data->line;
 
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index d8c0ffbfa6e3..097dff9c08ad 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@
 
 static int __init serial_init_chip(struct parisc_device *dev)
 {
-        struct uart_port port;
+        struct uart_8250_port uart;
         unsigned long address;
         int err;
 
@@ -48,21 +48,21 @@ static int __init serial_init_chip(struct parisc_device *dev)
         if (dev->id.sversion != 0x8d)
                 address += 0x800;
 
-        memset(&port, 0, sizeof(port));
-        port.iotype     = UPIO_MEM;
+        memset(&uart, 0, sizeof(uart));
+        uart.port.iotype        = UPIO_MEM;
         /* 7.272727MHz on Lasi.  Assumed the same for Dino, Wax and Timi. */
-        port.uartclk    = 7272727;
-        port.mapbase    = address;
-        port.membase    = ioremap_nocache(address, 16);
-        port.irq        = dev->irq;
-        port.flags      = UPF_BOOT_AUTOCONF;
-        port.dev        = &dev->dev;
-
-        err = serial8250_register_port(&port);
+        uart.port.uartclk       = 7272727;
+        uart.port.mapbase       = address;
+        uart.port.membase       = ioremap_nocache(address, 16);
+        uart.port.irq   = dev->irq;
+        uart.port.flags = UPF_BOOT_AUTOCONF;
+        uart.port.dev   = &dev->dev;
+
+        err = serial8250_register_8250_port(&uart);
         if (err < 0) {
                 printk(KERN_WARNING
-                        "serial8250_register_port returned error %d\n", err);
-                iounmap(port.membase);
+                        "serial8250_register_8250_port returned error %d\n", err);
+                iounmap(uart.port.membase);
                 return err;
         }
 
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index c13438c93012..8f1dd2cc00a8 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -171,7 +171,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
                 return 0;
         }
 #endif
-        memset(&port, 0, sizeof(struct uart_port));
+        memset(&uart, 0, sizeof(uart));
 
         /* Memory mapped I/O */
         port.iotype = UPIO_MEM;
@@ -182,7 +182,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
         port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
         port.regshift = 1;
         port.dev = &d->dev;
-        line = serial8250_register_port(&port);
+        line = serial8250_register_8250_port(&uart);
 
         if (line < 0) {
                 printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
@@ -210,7 +210,7 @@ static int __init hp300_8250_init(void)
 #ifdef CONFIG_HPAPCI
         int line;
         unsigned long base;
-        struct uart_port uport;
+        struct uart_8250_port uart;
         struct hp300_port *port;
         int i;
 #endif
@@ -248,26 +248,26 @@ static int __init hp300_8250_init(void)
                 if (!port)
                         return -ENOMEM;
 
-                memset(&uport, 0, sizeof(struct uart_port));
+                memset(&uart, 0, sizeof(uart));
 
                 base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
 
                 /* Memory mapped I/O */
-                uport.iotype = UPIO_MEM;
-                uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
+                uart.port.iotype = UPIO_MEM;
+                uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
                               | UPF_BOOT_AUTOCONF;
                 /* XXX - no interrupt support yet */
-                uport.irq = 0;
-                uport.uartclk = HPAPCI_BAUD_BASE * 16;
-                uport.mapbase = base;
-                uport.membase = (char *)(base + DIO_VIRADDRBASE);
-                uport.regshift = 2;
+                uart.port.irq = 0;
+                uart.port.uartclk = HPAPCI_BAUD_BASE * 16;
+                uart.port.mapbase = base;
+                uart.port.membase = (char *)(base + DIO_VIRADDRBASE);
+                uart.port.regshift = 2;
 
-                line = serial8250_register_port(&uport);
+                line = serial8250_register_8250_port(&uart);
 
                 if (line < 0) {
                         printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
-                               " %d irq %d failed\n", i, uport.irq);
+                               " %d irq %d failed\n", i, uart.port.irq);
                         kfree(port);
                         continue;
                 }
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 28e7c7cce893..fdab80a4e063 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -44,7 +44,7 @@ struct pci_serial_quirk {
         int     (*init)(struct pci_dev *dev);
         int     (*setup)(struct serial_private *,
                          const struct pciserial_board *,
-                         struct uart_port *, int);
+                         struct uart_8250_port *, int);
         void    (*exit)(struct pci_dev *dev);
 };
 
@@ -59,7 +59,7 @@ struct serial_private {
 };
 
 static int pci_default_setup(struct serial_private*,
-          const struct pciserial_board*, struct uart_port*, int);
+          const struct pciserial_board*, struct uart_8250_port *, int);
 
 static void moan_device(const char *str, struct pci_dev *dev)
 {
@@ -74,7 +74,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
 }
 
 static int
-setup_port(struct serial_private *priv, struct uart_port *port,
+setup_port(struct serial_private *priv, struct uart_8250_port *port,
            int bar, int offset, int regshift)
 {
         struct pci_dev *dev = priv->dev;
@@ -93,17 +93,17 @@ setup_port(struct serial_private *priv, struct uart_port *port,
                 if (!priv->remapped_bar[bar])
                         return -ENOMEM;
 
-                port->iotype = UPIO_MEM;
-                port->iobase = 0;
-                port->mapbase = base + offset;
-                port->membase = priv->remapped_bar[bar] + offset;
-                port->regshift = regshift;
+                port->port.iotype = UPIO_MEM;
+                port->port.iobase = 0;
+                port->port.mapbase = base + offset;
+                port->port.membase = priv->remapped_bar[bar] + offset;
+                port->port.regshift = regshift;
         } else {
-                port->iotype = UPIO_PORT;
-                port->iobase = base + offset;
-                port->mapbase = 0;
-                port->membase = NULL;
-                port->regshift = 0;
+                port->port.iotype = UPIO_PORT;
+                port->port.iobase = base + offset;
+                port->port.mapbase = 0;
+                port->port.membase = NULL;
+                port->port.regshift = 0;
         }
         return 0;
 }
@@ -113,7 +113,7 @@ setup_port(struct serial_private *priv, struct uart_port *port,
  */
 static int addidata_apci7800_setup(struct serial_private *priv,
                                 const struct pciserial_board *board,
-                                struct uart_port *port, int idx)
+                                struct uart_8250_port *port, int idx)
 {
         unsigned int bar = 0, offset = board->first_offset;
         bar = FL_GET_BASE(board->flags);
@@ -140,7 +140,7 @@ static int addidata_apci7800_setup(struct serial_private *priv,
  */
 static int
 afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
-              struct uart_port *port, int idx)
+              struct uart_8250_port *port, int idx)
 {
         unsigned int bar, offset = board->first_offset;
 
@@ -195,7 +195,7 @@ static int pci_hp_diva_init(struct pci_dev *dev)
 static int
 pci_hp_diva_setup(struct serial_private *priv,
                 const struct pciserial_board *board,
-                struct uart_port *port, int idx)
+                struct uart_8250_port *port, int idx)
 {
         unsigned int offset = board->first_offset;
         unsigned int bar = FL_GET_BASE(board->flags);
@@ -370,7 +370,7 @@ static void __devexit pci_ni8430_exit(struct pci_dev *dev)
 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
 static int
 sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
-                struct uart_port *port, int idx)
+                struct uart_8250_port *port, int idx)
 {
         unsigned int bar, offset = board->first_offset;
 
@@ -525,7 +525,7 @@ static int pci_siig_init(struct pci_dev *dev)
 
 static int pci_siig_setup(struct serial_private *priv,
                           const struct pciserial_board *board,
-                          struct uart_port *port, int idx)
+                          struct uart_8250_port *port, int idx)
 {
         unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
 
@@ -619,7 +619,7 @@ static int pci_timedia_init(struct pci_dev *dev)
 static int
 pci_timedia_setup(struct serial_private *priv,
                   const struct pciserial_board *board,
-                  struct uart_port *port, int idx)
+                  struct uart_8250_port *port, int idx)
 {
         unsigned int bar = 0, offset = board->first_offset;
 
@@ -653,7 +653,7 @@ pci_timedia_setup(struct serial_private *priv,
 static int
 titan_400l_800l_setup(struct serial_private *priv,
                       const struct pciserial_board *board,
-                      struct uart_port *port, int idx)
+                      struct uart_8250_port *port, int idx)
 {
         unsigned int bar, offset = board->first_offset;
 
@@ -754,7 +754,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
 static int
 pci_ni8430_setup(struct serial_private *priv,
                  const struct pciserial_board *board,
-                 struct uart_port *port, int idx)
+                 struct uart_8250_port *port, int idx)
 {
         void __iomem *p;
         unsigned long base, len;
@@ -781,7 +781,7 @@ pci_ni8430_setup(struct serial_private *priv,
 
 static int pci_netmos_9900_setup(struct serial_private *priv,
                                 const struct pciserial_board *board,
-                                struct uart_port *port, int idx)
+                                struct uart_8250_port *port, int idx)
 {
         unsigned int bar;
 
@@ -1032,10 +1032,17 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
         return number_uarts;
 }
 
-static int
-pci_default_setup(struct serial_private *priv,
+static int pci_asix_setup(struct serial_private *priv,
                   const struct pciserial_board *board,
-                  struct uart_port *port, int idx)
+                  struct uart_8250_port *port, int idx)
+{
+        port->bugs |= UART_BUG_PARITY;
+        return pci_default_setup(priv, board, port, idx);
+}
+
+static int pci_default_setup(struct serial_private *priv,
+                  const struct pciserial_board *board,
+                  struct uart_8250_port *port, int idx)
 {
         unsigned int bar, offset = board->first_offset, maxnr;
 
@@ -1057,15 +1064,15 @@ pci_default_setup(struct serial_private *priv,
 static int
 ce4100_serial_setup(struct serial_private *priv,
                   const struct pciserial_board *board,
-                  struct uart_port *port, int idx)
+                  struct uart_8250_port *port, int idx)
 {
         int ret;
 
         ret = setup_port(priv, port, 0, 0, board->reg_shift);
-        port->iotype = UPIO_MEM32;
-        port->type = PORT_XSCALE;
-        port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
-        port->regshift = 2;
+        port->port.iotype = UPIO_MEM32;
+        port->port.type = PORT_XSCALE;
+        port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+        port->port.regshift = 2;
 
         return ret;
 }
@@ -1073,16 +1080,16 @@ ce4100_serial_setup(struct serial_private *priv,
 static int
 pci_omegapci_setup(struct serial_private *priv,
                       const struct pciserial_board *board,
-                      struct uart_port *port, int idx)
+                      struct uart_8250_port *port, int idx)
 {
         return setup_port(priv, port, 2, idx * 8, 0);
 }
 
 static int skip_tx_en_setup(struct serial_private *priv,
                         const struct pciserial_board *board,
-                        struct uart_port *port, int idx)
+                        struct uart_8250_port *port, int idx)
 {
-        port->flags |= UPF_NO_TXEN_TEST;
+        port->port.flags |= UPF_NO_TXEN_TEST;
         printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
                           "[%04x:%04x] subsystem [%04x:%04x]\n",
                           priv->dev->vendor,
@@ -1131,11 +1138,11 @@ static unsigned int kt_serial_in(struct uart_port *p, int offset)
 
 static int kt_serial_setup(struct serial_private *priv,
                            const struct pciserial_board *board,
-                           struct uart_port *port, int idx)
+                           struct uart_8250_port *port, int idx)
 {
-        port->flags |= UPF_BUG_THRE;
-        port->serial_in = kt_serial_in;
-        port->handle_break = kt_handle_break;
+        port->port.flags |= UPF_BUG_THRE;
+        port->port.serial_in = kt_serial_in;
+        port->port.handle_break = kt_handle_break;
         return skip_tx_en_setup(priv, board, port, idx);
 }
 
@@ -1151,9 +1158,19 @@ static int pci_eg20t_init(struct pci_dev *dev)
 static int
 pci_xr17c154_setup(struct serial_private *priv,
                   const struct pciserial_board *board,
-                  struct uart_port *port, int idx)
+                  struct uart_8250_port *port, int idx)
+{
+        port->port.flags |= UPF_EXAR_EFR;
+        return pci_default_setup(priv, board, port, idx);
+}
+
+static int
+pci_wch_ch353_setup(struct serial_private *priv,
+                    const struct pciserial_board *board,
+                    struct uart_8250_port *port, int idx)
 {
-        port->flags |= UPF_EXAR_EFR;
+        port->port.flags |= UPF_FIXED_TYPE;
+        port->port.type = PORT_16550A;
         return pci_default_setup(priv, board, port, idx);
 }
 
@@ -1187,6 +1204,13 @@ pci_xr17c154_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_NEO_2_OX_IBM     0x00F6
 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA  0xc001
 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
+#define PCI_VENDOR_ID_WCH               0x4348
+#define PCI_DEVICE_ID_WCH_CH353_4S      0x3453
+#define PCI_DEVICE_ID_WCH_CH353_2S1PF   0x5046
+#define PCI_DEVICE_ID_WCH_CH353_2S1P    0x7053
+#define PCI_VENDOR_ID_AGESTAR           0x5372
+#define PCI_DEVICE_ID_AGESTAR_9375      0x6872
+#define PCI_VENDOR_ID_ASIX              0x9710
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1726,7 +1750,41 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
                 .subvendor      = PCI_ANY_ID,
                 .subdevice      = PCI_ANY_ID,
                 .setup          = pci_omegapci_setup,
-         },
+        },
+        /* WCH CH353 2S1P card (16550 clone) */
+        {
+                .vendor         = PCI_VENDOR_ID_WCH,
+                .device         = PCI_DEVICE_ID_WCH_CH353_2S1P,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = pci_wch_ch353_setup,
+        },
+        /* WCH CH353 4S card (16550 clone) */
+        {
+                .vendor         = PCI_VENDOR_ID_WCH,
+                .device         = PCI_DEVICE_ID_WCH_CH353_4S,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = pci_wch_ch353_setup,
+        },
+        /* WCH CH353 2S1PF card (16550 clone) */
+        {
+                .vendor         = PCI_VENDOR_ID_WCH,
+                .device         = PCI_DEVICE_ID_WCH_CH353_2S1PF,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = pci_wch_ch353_setup,
+        },
+        /*
+         * ASIX devices with FIFO bug
+         */
+        {
+                .vendor         = PCI_VENDOR_ID_ASIX,
+                .device         = PCI_ANY_ID,
+                .subvendor      = PCI_ANY_ID,
+                .subdevice      = PCI_ANY_ID,
+                .setup          = pci_asix_setup,
+        },
         /*
          * Default "match everything" terminator entry
          */
@@ -1887,7 +1945,6 @@ enum pci_board_num_t {
         pbn_panacom,
         pbn_panacom2,
         pbn_panacom4,
-        pbn_exsys_4055,
         pbn_plx_romulus,
         pbn_oxsemi,
         pbn_oxsemi_1_4000000,
@@ -2393,13 +2450,6 @@ static struct pciserial_board pci_boards[] __devinitdata = {
                 .reg_shift      = 7,
         },
 
-        [pbn_exsys_4055] = {
-                .flags          = FL_BASE2,
-                .num_ports      = 4,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
-
         /* I think this entry is broken - the first_offset looks wrong --rmk */
         [pbn_plx_romulus] = {
                 .flags          = FL_BASE2,
@@ -2624,10 +2674,14 @@ static struct pciserial_board pci_boards[] __devinitdata = {
         },
 };
 
-static const struct pci_device_id softmodem_blacklist[] = {
+static const struct pci_device_id blacklist[] = {
+        /* softmodems */
         { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
         { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
         { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
+
+        /* multi-io cards handled by parport_serial */
+        { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
 };
 
 /*
@@ -2638,7 +2692,7 @@ static const struct pci_device_id softmodem_blacklist[] = {
 static int __devinit
 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 {
-        const struct pci_device_id *blacklist;
+        const struct pci_device_id *bldev;
         int num_iomem, num_port, first_port = -1, i;
 
         /*
@@ -2655,13 +2709,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 
         /*
          * Do not access blacklisted devices that are known not to
-         * feature serial ports.
+         * feature serial ports or are handled by other modules.
          */
-        for (blacklist = softmodem_blacklist;
-             blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
-             blacklist++) {
-                if (dev->vendor == blacklist->vendor &&
-                    dev->device == blacklist->device)
+        for (bldev = blacklist;
+             bldev < blacklist + ARRAY_SIZE(blacklist);
+             bldev++) {
+                if (dev->vendor == bldev->vendor &&
+                    dev->device == bldev->device)
                         return -ENODEV;
         }
 
@@ -2728,7 +2782,7 @@ serial_pci_matches(const struct pciserial_board *board,
 struct serial_private *
 pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
 {
-        struct uart_port serial_port;
+        struct uart_8250_port uart;
         struct serial_private *priv;
         struct pci_serial_quirk *quirk;
         int rc, nr_ports, i;
@@ -2768,22 +2822,22 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
         priv->dev = dev;
         priv->quirk = quirk;
 
-        memset(&serial_port, 0, sizeof(struct uart_port));
-        serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
-        serial_port.uartclk = board->base_baud * 16;
-        serial_port.irq = get_pci_irq(dev, board);
-        serial_port.dev = &dev->dev;
+        memset(&uart, 0, sizeof(uart));
+        uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+        uart.port.uartclk = board->base_baud * 16;
+        uart.port.irq = get_pci_irq(dev, board);
+        uart.port.dev = &dev->dev;
 
         for (i = 0; i < nr_ports; i++) {
-                if (quirk->setup(priv, board, &serial_port, i))
+                if (quirk->setup(priv, board, &uart, i))
                         break;
 
 #ifdef SERIAL_DEBUG_PCI
                 printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
-                       serial_port.iobase, serial_port.irq, serial_port.iotype);
+                       uart.port.iobase, uart.port.irq, uart.port.iotype);
 #endif
 
-                priv->line[i] = serial8250_register_port(&serial_port);
+                priv->line[i] = serial8250_register_8250_port(&uart);
                 if (priv->line[i] < 0) {
                         printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
                         break;
@@ -3193,7 +3247,7 @@ static struct pci_device_id serial_pci_tbl[] = {
         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
                 PCI_SUBVENDOR_ID_EXSYS,
                 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
-                pbn_exsys_4055 },
+                pbn_b2_4_115200 },
         /*
          * Megawolf Romulus PCI Serial Card, from Mike Hudson
          * (Exoray@isys.ca)
@@ -4179,6 +4233,25 @@ static struct pci_device_id serial_pci_tbl[] = {
                 pbn_omegapci },
 
         /*
+         * AgeStar as-prs2-009
+         */
+        {       PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
+                PCI_ANY_ID, PCI_ANY_ID,
+                0, 0, pbn_b0_bt_2_115200 },
+
+        /*
+         * WCH CH353 series devices: The 2S1P is handled by parport_serial
+         * so not listed here.
+         */
+        {       PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S,
+                PCI_ANY_ID, PCI_ANY_ID,
+                0, 0, pbn_b0_bt_4_115200 },
+
+        {       PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF,
+                PCI_ANY_ID, PCI_ANY_ID,
+                0, 0, pbn_b0_bt_2_115200 },
+
+        /*
          * These entries match devices with class COMMUNICATION_SERIAL,
          * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
          */
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index a2f236510ff1..fde5aa60d51e 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -424,7 +424,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
 static int __devinit
 serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
-        struct uart_port port;
+        struct uart_8250_port uart;
         int ret, line, flags = dev_id->driver_data;
 
         if (flags & UNKNOWN_DEV) {
@@ -433,32 +433,32 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
                         return ret;
         }
 
-        memset(&port, 0, sizeof(struct uart_port));
+        memset(&uart, 0, sizeof(uart));
         if (pnp_irq_valid(dev, 0))
-                port.irq = pnp_irq(dev, 0);
+                uart.port.irq = pnp_irq(dev, 0);
         if (pnp_port_valid(dev, 0)) {
-                port.iobase = pnp_port_start(dev, 0);
-                port.iotype = UPIO_PORT;
+                uart.port.iobase = pnp_port_start(dev, 0);
+                uart.port.iotype = UPIO_PORT;
         } else if (pnp_mem_valid(dev, 0)) {
-                port.mapbase = pnp_mem_start(dev, 0);
-                port.iotype = UPIO_MEM;
-                port.flags = UPF_IOREMAP;
+                uart.port.mapbase = pnp_mem_start(dev, 0);
+                uart.port.iotype = UPIO_MEM;
+                uart.port.flags = UPF_IOREMAP;
         } else
                 return -ENODEV;
 
 #ifdef SERIAL_DEBUG_PNP
         printk(KERN_DEBUG
                 "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
-                       port.iobase, port.mapbase, port.irq, port.iotype);
+                       uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
 #endif
 
-        port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+        uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
         if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
-                port.flags |= UPF_SHARE_IRQ;
-        port.uartclk = 1843200;
-        port.dev = &dev->dev;
+                uart.port.flags |= UPF_SHARE_IRQ;
+        uart.port.uartclk = 1843200;
+        uart.port.dev = &dev->dev;
 
-        line = serial8250_register_port(&port);
+        line = serial8250_register_8250_port(&uart);
         if (line < 0)
                 return -ENODEV;
 
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 29b695d041ec..b7d48b346393 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -73,7 +73,7 @@ struct serial_quirk {
         unsigned int prodid;
         int multi;              /* 1 = multifunction, > 1 = # ports */
         void (*config)(struct pcmcia_device *);
-        void (*setup)(struct pcmcia_device *, struct uart_port *);
+        void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
         void (*wakeup)(struct pcmcia_device *);
         int (*post)(struct pcmcia_device *);
 };
@@ -105,9 +105,9 @@ struct serial_cfg_mem {
  * Elan VPU16551 UART with 14.7456MHz oscillator
  * manfid 0x015D, 0x4C45
  */
-static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
+static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
 {
-        port->uartclk = 14745600;
+        uart->port.uartclk = 14745600;
 }
 
 static int quirk_post_ibm(struct pcmcia_device *link)
@@ -343,25 +343,25 @@ static void serial_detach(struct pcmcia_device *link)
 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
                         unsigned int iobase, int irq)
 {
-        struct uart_port port;
+        struct uart_8250_port uart;
         int line;
 
-        memset(&port, 0, sizeof (struct uart_port));
-        port.iobase = iobase;
-        port.irq = irq;
-        port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
-        port.uartclk = 1843200;
-        port.dev = &handle->dev;
+        memset(&uart, 0, sizeof(uart));
+        uart.port.iobase = iobase;
+        uart.port.irq = irq;
+        uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+        uart.port.uartclk = 1843200;
+        uart.port.dev = &handle->dev;
         if (buggy_uart)
-                port.flags |= UPF_BUGGY_UART;
+                uart.port.flags |= UPF_BUGGY_UART;
 
         if (info->quirk && info->quirk->setup)
-                info->quirk->setup(handle, &port);
+                info->quirk->setup(handle, &uart);
 
-        line = serial8250_register_port(&port);
+        line = serial8250_register_8250_port(&uart);
         if (line < 0) {
-                printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
-                       "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
+                pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
+                                                        (unsigned long)iobase, irq);
                 return -EINVAL;
         }
 
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4720b4ba096a..26907cf25744 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -257,12 +257,19 @@ config SERIAL_MAX3100
         help
           MAX3100 chip support
 
-config SERIAL_MAX3107
-        tristate "MAX3107 support"
+config SERIAL_MAX310X
+        bool "MAX310X support"
         depends on SPI
         select SERIAL_CORE
+        select REGMAP_SPI if SPI
+        default n
         help
-          MAX3107 chip support
+          This selects support for an advanced UART from Maxim (Dallas).
+          Supported ICs are MAX3107, MAX3108.
+          Each IC contains 128 words each of receive and transmit FIFO
+          that can be controlled through I2C or high-speed SPI.
+
+          Say Y here if you want to support this ICs.
 
 config SERIAL_DZ
         bool "DECstation DZ serial driver"
@@ -704,6 +711,25 @@ config SERIAL_PNX8XXX_CONSOLE
           If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
           and you want to use serial console, say Y. Otherwise, say N.
 
+config SERIAL_HS_LPC32XX
+        tristate "LPC32XX high speed serial port support"
+        depends on ARCH_LPC32XX && OF
+        select SERIAL_CORE
+        help
+          Support for the LPC32XX high speed serial ports (up to 900kbps).
+          Those are UARTs completely different from the Standard UARTs on the
+          LPC32XX SoC.
+          Choose M or Y here to build this driver.
+
+config SERIAL_HS_LPC32XX_CONSOLE
+        bool "Enable LPC32XX high speed UART serial console"
+        depends on SERIAL_HS_LPC32XX
+        select SERIAL_CORE_CONSOLE
+        help
+          If you would like to be able to use one of the high speed serial
+          ports on the LPC32XX as the console, you can do so by answering
+          Y to this option.
+
 config SERIAL_CORE
         tristate
 
@@ -1104,6 +1130,24 @@ config SERIAL_SC26XX_CONSOLE
         help
           Support for Console on SC2681/SC2692 serial ports.
 
+config SERIAL_SCCNXP
+        bool "SCCNXP serial port support"
+        depends on !SERIAL_SC26XX
+        select SERIAL_CORE
+        default n
+        help
+          This selects support for an advanced UART from NXP (Philips).
+          Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
+          SC28L202, SCC68681 and SCC68692.
+          Positioned as a replacement for the driver SC26XX.
+
+config SERIAL_SCCNXP_CONSOLE
+        bool "Console on SCCNXP serial port"
+        depends on SERIAL_SCCNXP
+        select SERIAL_CORE_CONSOLE
+        help
+          Support for console on SCCNXP serial ports.
+
 config SERIAL_BFIN_SPORT
         tristate "Blackfin SPORT emulate UART"
         depends on BLACKFIN
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 7257c5d898ae..ce88667cfd17 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -28,12 +28,13 @@ obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
-obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
+obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
+obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
 obj-$(CONFIG_SERIAL_ZS) += zs.o
 obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
@@ -47,6 +48,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
 obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
 obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
 obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
+obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 1f0330915d5a..15d80b9fb303 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -591,7 +591,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
         port->ops = &altera_uart_ops;
         port->flags = UPF_BOOT_AUTOCONF;
 
-        dev_set_drvdata(&pdev->dev, port);
+        platform_set_drvdata(pdev, port);
 
         uart_add_one_port(&altera_uart_driver, port);
 
@@ -600,11 +600,11 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 
 static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
-        struct uart_port *port = dev_get_drvdata(&pdev->dev);
+        struct uart_port *port = platform_get_drvdata(pdev);
 
         if (port) {
                 uart_remove_one_port(&altera_uart_driver, port);
-                dev_set_drvdata(&pdev->dev, NULL);
+                platform_set_drvdata(pdev, NULL);
                 port->mapbase = 0;
         }
 
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 0d91a540bf11..22317dd16474 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -312,16 +312,12 @@ static int pl010_startup(struct uart_port *port)
         struct uart_amba_port *uap = (struct uart_amba_port *)port;
         int retval;
 
-        retval = clk_prepare(uap->clk);
-        if (retval)
-                goto out;
-
         /*
          * Try to enable the clock producer.
          */
-        retval = clk_enable(uap->clk);
+        retval = clk_prepare_enable(uap->clk);
         if (retval)
-                goto clk_unprep;
+                goto out;
 
         uap->port.uartclk = clk_get_rate(uap->clk);
 
@@ -346,9 +342,7 @@ static int pl010_startup(struct uart_port *port)
         return 0;
 
  clk_dis:
-        clk_disable(uap->clk);
- clk_unprep:
-        clk_unprepare(uap->clk);
+        clk_disable_unprepare(uap->clk);
  out:
         return retval;
 }
@@ -375,8 +369,7 @@ static void pl010_shutdown(struct uart_port *port)
         /*
          * Shut down the clock producer
          */
-        clk_disable(uap->clk);
-        clk_unprepare(uap->clk);
+        clk_disable_unprepare(uap->clk);
 }
 
 static void
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d3553b5d3fca..cede93876649 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -52,6 +52,8 @@
 #include <linux/scatterlist.h>
 #include <linux/delay.h>
 #include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/sizes.h>
 
@@ -75,7 +77,6 @@ struct vendor_data {
         unsigned int            lcrh_tx;
         unsigned int            lcrh_rx;
         bool                    oversampling;
-        bool                    interrupt_may_hang;   /* vendor-specific */
         bool                    dma_threshold;
         bool                    cts_event_workaround;
 };
@@ -96,7 +97,6 @@ static struct vendor_data vendor_st = {
         .lcrh_tx                = ST_UART011_LCRH_TX,
         .lcrh_rx                = ST_UART011_LCRH_RX,
         .oversampling           = true,
-        .interrupt_may_hang     = true,
         .dma_threshold          = true,
         .cts_event_workaround   = true,
 };
@@ -147,7 +147,6 @@ struct uart_amba_port {
         unsigned int            old_cr;         /* state during shutdown */
         bool                    autorts;
         char                    type[12];
-        bool                    interrupt_may_hang; /* vendor-specific */
 #ifdef CONFIG_DMA_ENGINE
         /* DMA stuff */
         bool                    using_tx_dma;
@@ -1215,14 +1214,14 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
         return IRQ_RETVAL(handled);
 }
 
-static unsigned int pl01x_tx_empty(struct uart_port *port)
+static unsigned int pl011_tx_empty(struct uart_port *port)
 {
         struct uart_amba_port *uap = (struct uart_amba_port *)port;
         unsigned int status = readw(uap->port.membase + UART01x_FR);
         return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
 }
 
-static unsigned int pl01x_get_mctrl(struct uart_port *port)
+static unsigned int pl011_get_mctrl(struct uart_port *port)
 {
         struct uart_amba_port *uap = (struct uart_amba_port *)port;
         unsigned int result = 0;
@@ -1285,7 +1284,7 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
 }
 
 #ifdef CONFIG_CONSOLE_POLL
-static int pl010_get_poll_char(struct uart_port *port)
+static int pl011_get_poll_char(struct uart_port *port)
 {
         struct uart_amba_port *uap = (struct uart_amba_port *)port;
         unsigned int status;
@@ -1297,7 +1296,7 @@ static int pl010_get_poll_char(struct uart_port *port)
         return readw(uap->port.membase + UART01x_DR);
 }
 
-static void pl010_put_poll_char(struct uart_port *port,
+static void pl011_put_poll_char(struct uart_port *port,
                          unsigned char ch)
 {
         struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1324,16 +1323,12 @@ static int pl011_startup(struct uart_port *port)
                                 "could not set default pins\n");
         }
 
-        retval = clk_prepare(uap->clk);
-        if (retval)
-                goto out;
-
         /*
          * Try to enable the clock producer.
          */
-        retval = clk_enable(uap->clk);
+        retval = clk_prepare_enable(uap->clk);
         if (retval)
-                goto clk_unprep;
+                goto out;
 
         uap->port.uartclk = clk_get_rate(uap->clk);
 
@@ -1411,9 +1406,7 @@ static int pl011_startup(struct uart_port *port)
         return 0;
 
  clk_dis:
-        clk_disable(uap->clk);
- clk_unprep:
-        clk_unprepare(uap->clk);
+        clk_disable_unprepare(uap->clk);
  out:
         return retval;
 }
@@ -1473,8 +1466,7 @@ static void pl011_shutdown(struct uart_port *port)
         /*
          * Shut down the clock producer
          */
-        clk_disable(uap->clk);
-        clk_unprepare(uap->clk);
+        clk_disable_unprepare(uap->clk);
         /* Optionally let pins go into sleep states */
         if (!IS_ERR(uap->pins_sleep)) {
                 retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
@@ -1637,7 +1629,7 @@ static const char *pl011_type(struct uart_port *port)
 /*
  * Release the memory region(s) being used by 'port'
  */
-static void pl010_release_port(struct uart_port *port)
+static void pl011_release_port(struct uart_port *port)
 {
         release_mem_region(port->mapbase, SZ_4K);
 }
@@ -1645,7 +1637,7 @@ static void pl010_release_port(struct uart_port *port)
 /*
  * Request the memory region(s) being used by 'port'
  */
-static int pl010_request_port(struct uart_port *port)
+static int pl011_request_port(struct uart_port *port)
 {
         return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
                         != NULL ? 0 : -EBUSY;
@@ -1654,18 +1646,18 @@ static int pl010_request_port(struct uart_port *port)
 /*
  * Configure/autoconfigure the port.
  */
-static void pl010_config_port(struct uart_port *port, int flags)
+static void pl011_config_port(struct uart_port *port, int flags)
 {
         if (flags & UART_CONFIG_TYPE) {
                 port->type = PORT_AMBA;
-                pl010_request_port(port);
+                pl011_request_port(port);
         }
 }
 
 /*
  * verify the new serial_struct (for TIOCSSERIAL).
  */
-static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
         int ret = 0;
         if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
@@ -1678,9 +1670,9 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
 }
 
 static struct uart_ops amba_pl011_pops = {
-        .tx_empty       = pl01x_tx_empty,
+        .tx_empty       = pl011_tx_empty,
         .set_mctrl      = pl011_set_mctrl,
-        .get_mctrl      = pl01x_get_mctrl,
+        .get_mctrl      = pl011_get_mctrl,
         .stop_tx        = pl011_stop_tx,
         .start_tx       = pl011_start_tx,
         .stop_rx        = pl011_stop_rx,
@@ -1691,13 +1683,13 @@ static struct uart_ops amba_pl011_pops = {
         .flush_buffer   = pl011_dma_flush_buffer,
         .set_termios    = pl011_set_termios,
         .type           = pl011_type,
-        .release_port   = pl010_release_port,
-        .request_port   = pl010_request_port,
-        .config_port    = pl010_config_port,
-        .verify_port    = pl010_verify_port,
+        .release_port   = pl011_release_port,
+        .request_port   = pl011_request_port,
+        .config_port    = pl011_config_port,
+        .verify_port    = pl011_verify_port,
 #ifdef CONFIG_CONSOLE_POLL
-        .poll_get_char = pl010_get_poll_char,
-        .poll_put_char = pl010_put_poll_char,
+        .poll_get_char = pl011_get_poll_char,
+        .poll_put_char = pl011_put_poll_char,
 #endif
 };
 
@@ -1869,6 +1861,38 @@ static struct uart_driver amba_reg = {
         .cons                   = AMBA_CONSOLE,
 };
 
+static int pl011_probe_dt_alias(int index, struct device *dev)
+{
+        struct device_node *np;
+        static bool seen_dev_with_alias = false;
+        static bool seen_dev_without_alias = false;
+        int ret = index;
+
+        if (!IS_ENABLED(CONFIG_OF))
+                return ret;
+
+        np = dev->of_node;
+        if (!np)
+                return ret;
+
+        ret = of_alias_get_id(np, "serial");
+        if (IS_ERR_VALUE(ret)) {
+                seen_dev_without_alias = true;
+                ret = index;
+        } else {
+                seen_dev_with_alias = true;
+                if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
+                        dev_warn(dev, "requested serial port %d  not available.\n", ret);
+                        ret = index;
+                }
+        }
+
+        if (seen_dev_with_alias && seen_dev_without_alias)
+                dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n");
+
+        return ret;
+}
+
 static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 {
         struct uart_amba_port *uap;
@@ -1891,6 +1915,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
                 goto out;
         }
 
+        i = pl011_probe_dt_alias(i, &dev->dev);
+
         base = ioremap(dev->res.start, resource_size(&dev->res));
         if (!base) {
                 ret = -ENOMEM;
@@ -1923,7 +1949,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
         uap->lcrh_tx = vendor->lcrh_tx;
         uap->old_cr = 0;
         uap->fifosize = vendor->fifosize;
-        uap->interrupt_may_hang = vendor->interrupt_may_hang;
         uap->port.dev = &dev->dev;
         uap->port.mapbase = dev->res.start;
         uap->port.membase = base;
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index bd97db23985b..9242d56ba267 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -182,7 +182,7 @@ static void bfin_serial_start_tx(struct uart_port *port)
          * To avoid losting RX interrupt, we reset IR function
          * before sending data.
          */
-        if (tty->termios->c_line == N_IRDA)
+        if (tty->termios.c_line == N_IRDA)
                 bfin_serial_reset_irda(port);
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 80b6b1b1f725..35ee6a2c6877 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -955,7 +955,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 /* Calculate the chartime depending on baudrate, numbor of bits etc. */
 static void update_char_time(struct e100_serial * info)
 {
-        tcflag_t cflags = info->port.tty->termios->c_cflag;
+        tcflag_t cflags = info->port.tty->termios.c_cflag;
         int bits;
 
         /* calc. number of bits / data byte */
@@ -1473,7 +1473,7 @@ rs_stop(struct tty_struct *tty)
                 xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
                                 STOP_CHAR(info->port.tty));
                 xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
-                if (tty->termios->c_iflag & IXON ) {
+                if (tty->termios.c_iflag & IXON ) {
                         xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
                 }
 
@@ -1496,7 +1496,7 @@ rs_start(struct tty_struct *tty)
                                          info->xmit.tail,SERIAL_XMIT_SIZE)));
                 xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
                 xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-                if (tty->termios->c_iflag & IXON ) {
+                if (tty->termios.c_iflag & IXON ) {
                         xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
                 }
 
@@ -2929,7 +2929,7 @@ shutdown(struct e100_serial * info)
                         descr[i].buf = 0;
                 }
 
-        if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+        if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
                 /* hang up DTR and RTS if HUPCL is enabled */
                 e100_dtr(info, 0);
                 e100_rts(info, 0); /* could check CRTSCTS before doing this */
@@ -2953,12 +2953,12 @@ change_speed(struct e100_serial *info)
         unsigned long flags;
         /* first some safety checks */
 
-        if (!info->port.tty || !info->port.tty->termios)
+        if (!info->port.tty)
                 return;
         if (!info->ioport)
                 return;
 
-        cflag = info->port.tty->termios->c_cflag;
+        cflag = info->port.tty->termios.c_cflag;
 
         /* possibly, the tx/rx should be disabled first to do this safely */
 
@@ -3088,7 +3088,7 @@ change_speed(struct e100_serial *info)
         info->ioport[REG_REC_CTRL] = info->rx_ctrl;
         xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
         xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-        if (info->port.tty->termios->c_iflag & IXON ) {
+        if (info->port.tty->termios.c_iflag & IXON ) {
                 DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n",
                                 STOP_CHAR(info->port.tty)));
                 xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
@@ -3355,7 +3355,7 @@ rs_throttle(struct tty_struct * tty)
         DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
 
         /* Do RTS before XOFF since XOFF might take some time */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 /* Turn off RTS line */
                 e100_rts(info, 0);
         }
@@ -3377,7 +3377,7 @@ rs_unthrottle(struct tty_struct * tty)
         DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
         DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
         /* Do RTS before XOFF since XOFF might take some time */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 /* Assert RTS line  */
                 e100_rts(info, 1);
         }
@@ -3748,7 +3748,7 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle turning off CRTSCTS */
         if ((old_termios->c_cflag & CRTSCTS) &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 rs_start(tty);
         }
@@ -3815,7 +3815,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
          * separate termios for callout and dialin.
          */
         if (info->flags & ASYNC_NORMAL_ACTIVE)
-                info->normal_termios = *tty->termios;
+                info->normal_termios = tty->termios;
         /*
          * Now we wait for the transmit buffer to clear; and we notify
          * the line discipline to only process XON/XOFF characters.
@@ -3976,7 +3976,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
          */
         if (tty_hung_up_p(filp) ||
             (info->flags & ASYNC_CLOSING)) {
-                wait_event_interruptible_tty(info->close_wait,
+                wait_event_interruptible_tty(tty, info->close_wait,
                         !(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
                 if (info->flags & ASYNC_HUP_NOTIFY)
@@ -3998,7 +3998,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
                 return 0;
         }
 
-        if (tty->termios->c_cflag & CLOCAL) {
+        if (tty->termios.c_cflag & CLOCAL) {
                         do_clocal = 1;
         }
 
@@ -4052,9 +4052,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
                 printk("block_til_ready blocking: ttyS%d, count = %d\n",
                        info->line, info->count);
 #endif
-                tty_unlock();
+                tty_unlock(tty);
                 schedule();
-                tty_lock();
+                tty_lock(tty);
         }
         set_current_state(TASK_RUNNING);
         remove_wait_queue(&info->open_wait, &wait);
@@ -4115,7 +4115,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
          */
         if (tty_hung_up_p(filp) ||
             (info->flags & ASYNC_CLOSING)) {
-                wait_event_interruptible_tty(info->close_wait,
+                wait_event_interruptible_tty(tty, info->close_wait,
                         !(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
                 return ((info->flags & ASYNC_HUP_NOTIFY) ?
@@ -4219,7 +4219,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
         }
 
         if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
-                *tty->termios = info->normal_termios;
+                tty->termios = info->normal_termios;
                 change_speed(info);
         }
 
@@ -4443,14 +4443,12 @@ static int __init rs_init(void)
                 B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
         driver->init_termios.c_ispeed = 115200;
         driver->init_termios.c_ospeed = 115200;
-        driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+        driver->flags = TTY_DRIVER_REAL_RAW;
 
         tty_set_operations(driver, &rs_ops);
         serial_driver = driver;
-        if (tty_register_driver(driver))
-                panic("Couldn't register serial driver\n");
-        /* do some initializing for the separate ports */
 
+        /* do some initializing for the separate ports */
         for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
                 if (info->enabled) {
                         if (cris_request_io_interface(info->io_if,
@@ -4502,7 +4500,12 @@ static int __init rs_init(void)
                         printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
                                serial_driver->name, info->line, info->ioport);
                 }
+                tty_port_link_device(&info->port, driver, i);
         }
+
+        if (tty_register_driver(driver))
+                panic("Couldn't register serial driver\n");
+
 #ifdef CONFIG_ETRAX_FAST_TIMER
 #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
         memset(fast_timers, 0, sizeof(fast_timers));
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 3ad079ffd049..5b9bc19ed134 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -800,8 +800,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
         tty_port_init(pport);
         pport->ops = &ifx_tty_port_ops;
         ifx_dev->minor = IFX_SPI_TTY_ID;
-        ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
-                                               &ifx_dev->spi_dev->dev);
+        ifx_dev->tty_dev = tty_port_register_device(pport, tty_drv,
+                        ifx_dev->minor, &ifx_dev->spi_dev->dev);
         if (IS_ERR(ifx_dev->tty_dev)) {
                 dev_dbg(&ifx_dev->spi_dev->dev,
                         "%s: registering tty device failed", __func__);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e309e8b0aaba..5952b25c288e 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -207,7 +207,7 @@ struct imx_port {
         unsigned short          trcv_delay; /* transceiver delay */
         struct clk              *clk_ipg;
         struct clk              *clk_per;
-        struct imx_uart_data    *devdata;
+        const struct imx_uart_data *devdata;
 };
 
 struct imx_port_ucrs {
@@ -1505,18 +1505,21 @@ static int serial_imx_probe(struct platform_device *pdev)
         pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
         if (IS_ERR(pinctrl)) {
                 ret = PTR_ERR(pinctrl);
+                dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret);
                 goto unmap;
         }
 
         sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
         if (IS_ERR(sport->clk_ipg)) {
                 ret = PTR_ERR(sport->clk_ipg);
+                dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
                 goto unmap;
         }
 
         sport->clk_per = devm_clk_get(&pdev->dev, "per");
         if (IS_ERR(sport->clk_per)) {
                 ret = PTR_ERR(sport->clk_per);
+                dev_err(&pdev->dev, "failed to get per clk: %d\n", ret);
                 goto unmap;
         }
 
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 758ff310f7f8..5ac52898a0bb 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -1120,13 +1120,14 @@ static inline int do_read(struct uart_port *the_port, char *buf, int len)
         struct ioc3_port *port = get_ioc3_port(the_port);
         struct ring *inring;
         struct ring_entry *entry;
-        struct port_hooks *hooks = port->ip_hooks;
+        struct port_hooks *hooks;
         int byte_num;
         char *sc;
         int loop_counter;
 
         BUG_ON(!(len >= 0));
         BUG_ON(!port);
+        hooks = port->ip_hooks;
 
         /* There is a nasty timing issue in the IOC3. When the rx_timer
          * expires or the rx_high condition arises, we take an interrupt.
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index e16894fb2ca3..3e7da10cebba 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1803,7 +1803,7 @@ static inline int ic4_startup_local(struct uart_port *the_port)
         ioc4_set_proto(port, the_port->mapbase);
 
         /* set the speed of the serial port */
-        ioc4_change_speed(the_port, state->port.tty->termios,
+        ioc4_change_speed(the_port, &state->port.tty->termios,
                           (struct ktermios *)0);
 
         return 0;
@@ -2069,13 +2069,14 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
         struct ioc4_port *port = get_ioc4_port(the_port, 0);
         struct ring *inring;
         struct ring_entry *entry;
-        struct hooks *hooks = port->ip_hooks;
+        struct hooks *hooks;
         int byte_num;
         char *sc;
         int loop_counter;
 
         BUG_ON(!(len >= 0));
         BUG_ON(!port);
+        hooks = port->ip_hooks;
 
         /* There is a nasty timing issue in the IOC4. When the rx_timer
          * expires or the rx_high condition arises, we take an interrupt.
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 434bd881fcae..71397961773c 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -161,7 +161,7 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch)
         struct ktermios *termios;
 
         spin_lock_irqsave(&port->lock, lock_flags);
-        termios = port->state->port.tty->termios;
+        termios = &port->state->port.tty->termios;
         if (ch == termios->c_cc[VSTART])
                 channel->ch_bd->bd_ops->send_start_character(channel);
 
@@ -250,7 +250,7 @@ static int jsm_tty_open(struct uart_port *port)
         channel->ch_cached_lsr = 0;
         channel->ch_stops_sent = 0;
 
-        termios = port->state->port.tty->termios;
+        termios = &port->state->port.tty->termios;
         channel->ch_c_cflag     = termios->c_cflag;
         channel->ch_c_iflag     = termios->c_iflag;
         channel->ch_c_oflag     = termios->c_oflag;
@@ -283,7 +283,7 @@ static void jsm_tty_close(struct uart_port *port)
         jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
 
         bd = channel->ch_bd;
-        ts = port->state->port.tty->termios;
+        ts = &port->state->port.tty->termios;
 
         channel->ch_flags &= ~(CH_STOPI);
 
@@ -567,7 +567,7 @@ void jsm_input(struct jsm_channel *ch)
          *input data and return immediately.
          */
         if (!tp ||
-                !(tp->termios->c_cflag & CREAD) ) {
+                !(tp->termios.c_cflag & CREAD) ) {
 
                 jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
                         "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
new file mode 100644
index 000000000000..ba3af3bf6d43
--- /dev/null
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -0,0 +1,823 @@
+/*
+ * High Speed Serial Ports on NXP LPC32xx SoC
+ *
+ * Authors: Kevin Wells <kevin.wells@nxp.com>
+ *          Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/nmi.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/*
+ * High Speed UART register offsets
+ */
+#define LPC32XX_HSUART_FIFO(x)                  ((x) + 0x00)
+#define LPC32XX_HSUART_LEVEL(x)                 ((x) + 0x04)
+#define LPC32XX_HSUART_IIR(x)                   ((x) + 0x08)
+#define LPC32XX_HSUART_CTRL(x)                  ((x) + 0x0C)
+#define LPC32XX_HSUART_RATE(x)                  ((x) + 0x10)
+
+#define LPC32XX_HSU_BREAK_DATA                  (1 << 10)
+#define LPC32XX_HSU_ERROR_DATA                  (1 << 9)
+#define LPC32XX_HSU_RX_EMPTY                    (1 << 8)
+
+#define LPC32XX_HSU_TX_LEV(n)                   (((n) >> 8) & 0xFF)
+#define LPC32XX_HSU_RX_LEV(n)                   ((n) & 0xFF)
+
+#define LPC32XX_HSU_TX_INT_SET                  (1 << 6)
+#define LPC32XX_HSU_RX_OE_INT                   (1 << 5)
+#define LPC32XX_HSU_BRK_INT                     (1 << 4)
+#define LPC32XX_HSU_FE_INT                      (1 << 3)
+#define LPC32XX_HSU_RX_TIMEOUT_INT              (1 << 2)
+#define LPC32XX_HSU_RX_TRIG_INT                 (1 << 1)
+#define LPC32XX_HSU_TX_INT                      (1 << 0)
+
+#define LPC32XX_HSU_HRTS_INV                    (1 << 21)
+#define LPC32XX_HSU_HRTS_TRIG_8B                (0x0 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_16B               (0x1 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_32B               (0x2 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_48B               (0x3 << 19)
+#define LPC32XX_HSU_HRTS_EN                     (1 << 18)
+#define LPC32XX_HSU_TMO_DISABLED                (0x0 << 16)
+#define LPC32XX_HSU_TMO_INACT_4B                (0x1 << 16)
+#define LPC32XX_HSU_TMO_INACT_8B                (0x2 << 16)
+#define LPC32XX_HSU_TMO_INACT_16B               (0x3 << 16)
+#define LPC32XX_HSU_HCTS_INV                    (1 << 15)
+#define LPC32XX_HSU_HCTS_EN                     (1 << 14)
+#define LPC32XX_HSU_OFFSET(n)                   ((n) << 9)
+#define LPC32XX_HSU_BREAK                       (1 << 8)
+#define LPC32XX_HSU_ERR_INT_EN                  (1 << 7)
+#define LPC32XX_HSU_RX_INT_EN                   (1 << 6)
+#define LPC32XX_HSU_TX_INT_EN                   (1 << 5)
+#define LPC32XX_HSU_RX_TL1B                     (0x0 << 2)
+#define LPC32XX_HSU_RX_TL4B                     (0x1 << 2)
+#define LPC32XX_HSU_RX_TL8B                     (0x2 << 2)
+#define LPC32XX_HSU_RX_TL16B                    (0x3 << 2)
+#define LPC32XX_HSU_RX_TL32B                    (0x4 << 2)
+#define LPC32XX_HSU_RX_TL48B                    (0x5 << 2)
+#define LPC32XX_HSU_TX_TLEMPTY                  (0x0 << 0)
+#define LPC32XX_HSU_TX_TL0B                     (0x0 << 0)
+#define LPC32XX_HSU_TX_TL4B                     (0x1 << 0)
+#define LPC32XX_HSU_TX_TL8B                     (0x2 << 0)
+#define LPC32XX_HSU_TX_TL16B                    (0x3 << 0)
+
+#define MODNAME "lpc32xx_hsuart"
+
+struct lpc32xx_hsuart_port {
+        struct uart_port port;
+};
+
+#define FIFO_READ_LIMIT 128
+#define MAX_PORTS 3
+#define LPC32XX_TTY_NAME "ttyTX"
+static struct lpc32xx_hsuart_port lpc32xx_hs_ports[MAX_PORTS];
+
+#ifdef CONFIG_SERIAL_HS_LPC32XX_CONSOLE
+static void wait_for_xmit_empty(struct uart_port *port)
+{
+        unsigned int timeout = 10000;
+
+        do {
+                if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
+                                                        port->membase))) == 0)
+                        break;
+                if (--timeout == 0)
+                        break;
+                udelay(1);
+        } while (1);
+}
+
+static void wait_for_xmit_ready(struct uart_port *port)
+{
+        unsigned int timeout = 10000;
+
+        while (1) {
+                if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
+                                                        port->membase))) < 32)
+                        break;
+                if (--timeout == 0)
+                        break;
+                udelay(1);
+        }
+}
+
+static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch)
+{
+        wait_for_xmit_ready(port);
+        writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase));
+}
+
+static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
+                                         unsigned int count)
+{
+        struct lpc32xx_hsuart_port *up = &lpc32xx_hs_ports[co->index];
+        unsigned long flags;
+        int locked = 1;
+
+        touch_nmi_watchdog();
+        local_irq_save(flags);
+        if (up->port.sysrq)
+                locked = 0;
+        else if (oops_in_progress)
+                locked = spin_trylock(&up->port.lock);
+        else
+                spin_lock(&up->port.lock);
+
+        uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar);
+        wait_for_xmit_empty(&up->port);
+
+        if (locked)
+                spin_unlock(&up->port.lock);
+        local_irq_restore(flags);
+}
+
+static int __init lpc32xx_hsuart_console_setup(struct console *co,
+                                               char *options)
+{
+        struct uart_port *port;
+        int baud = 115200;
+        int bits = 8;
+        int parity = 'n';
+        int flow = 'n';
+
+        if (co->index >= MAX_PORTS)
+                co->index = 0;
+
+        port = &lpc32xx_hs_ports[co->index].port;
+        if (!port->membase)
+                return -ENODEV;
+
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+        return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver lpc32xx_hsuart_reg;
+static struct console lpc32xx_hsuart_console = {
+        .name           = LPC32XX_TTY_NAME,
+        .write          = lpc32xx_hsuart_console_write,
+        .device         = uart_console_device,
+        .setup          = lpc32xx_hsuart_console_setup,
+        .flags          = CON_PRINTBUFFER,
+        .index          = -1,
+        .data           = &lpc32xx_hsuart_reg,
+};
+
+static int __init lpc32xx_hsuart_console_init(void)
+{
+        register_console(&lpc32xx_hsuart_console);
+        return 0;
+}
+console_initcall(lpc32xx_hsuart_console_init);
+
+#define LPC32XX_HSUART_CONSOLE (&lpc32xx_hsuart_console)
+#else
+#define LPC32XX_HSUART_CONSOLE NULL
+#endif
+
+static struct uart_driver lpc32xx_hs_reg = {
+        .owner          = THIS_MODULE,
+        .driver_name    = MODNAME,
+        .dev_name       = LPC32XX_TTY_NAME,
+        .nr             = MAX_PORTS,
+        .cons           = LPC32XX_HSUART_CONSOLE,
+};
+static int uarts_registered;
+
+static unsigned int __serial_get_clock_div(unsigned long uartclk,
+                                           unsigned long rate)
+{
+        u32 div, goodrate, hsu_rate, l_hsu_rate, comprate;
+        u32 rate_diff;
+
+        /* Find the closest divider to get the desired clock rate */
+        div = uartclk / rate;
+        goodrate = hsu_rate = (div / 14) - 1;
+        if (hsu_rate != 0)
+                hsu_rate--;
+
+        /* Tweak divider */
+        l_hsu_rate = hsu_rate + 3;
+        rate_diff = 0xFFFFFFFF;
+
+        while (hsu_rate < l_hsu_rate) {
+                comprate = uartclk / ((hsu_rate + 1) * 14);
+                if (abs(comprate - rate) < rate_diff) {
+                        goodrate = hsu_rate;
+                        rate_diff = abs(comprate - rate);
+                }
+
+                hsu_rate++;
+        }
+        if (hsu_rate > 0xFF)
+                hsu_rate = 0xFF;
+
+        return goodrate;
+}
+
+static void __serial_uart_flush(struct uart_port *port)
+{
+        u32 tmp;
+        int cnt = 0;
+
+        while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) &&
+               (cnt++ < FIFO_READ_LIMIT))
+                tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+}
+
+static void __serial_lpc32xx_rx(struct uart_port *port)
+{
+        unsigned int tmp, flag;
+        struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+        if (!tty) {
+                /* Discard data: no tty available */
+                while (!(readl(LPC32XX_HSUART_FIFO(port->membase)) &
+                         LPC32XX_HSU_RX_EMPTY))
+                        ;
+
+                return;
+        }
+
+        /* Read data from FIFO and push into terminal */
+        tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+        while (!(tmp & LPC32XX_HSU_RX_EMPTY)) {
+                flag = TTY_NORMAL;
+                port->icount.rx++;
+
+                if (tmp & LPC32XX_HSU_ERROR_DATA) {
+                        /* Framing error */
+                        writel(LPC32XX_HSU_FE_INT,
+                               LPC32XX_HSUART_IIR(port->membase));
+                        port->icount.frame++;
+                        flag = TTY_FRAME;
+                        tty_insert_flip_char(tty, 0, TTY_FRAME);
+                }
+
+                tty_insert_flip_char(tty, (tmp & 0xFF), flag);
+
+                tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+        }
+        tty_flip_buffer_push(tty);
+        tty_kref_put(tty);
+}
+
+static void __serial_lpc32xx_tx(struct uart_port *port)
+{
+        struct circ_buf *xmit = &port->state->xmit;
+        unsigned int tmp;
+
+        if (port->x_char) {
+                writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase));
+                port->icount.tx++;
+                port->x_char = 0;
+                return;
+        }
+
+        if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+                goto exit_tx;
+
+        /* Transfer data */
+        while (LPC32XX_HSU_TX_LEV(readl(
+                LPC32XX_HSUART_LEVEL(port->membase))) < 64) {
+                writel((u32) xmit->buf[xmit->tail],
+                       LPC32XX_HSUART_FIFO(port->membase));
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                port->icount.tx++;
+                if (uart_circ_empty(xmit))
+                        break;
+        }
+
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(port);
+
+exit_tx:
+        if (uart_circ_empty(xmit)) {
+                tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+                tmp &= ~LPC32XX_HSU_TX_INT_EN;
+                writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+        }
+}
+
+static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
+{
+        struct uart_port *port = dev_id;
+        struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+        u32 status;
+
+        spin_lock(&port->lock);
+
+        /* Read UART status and clear latched interrupts */
+        status = readl(LPC32XX_HSUART_IIR(port->membase));
+
+        if (status & LPC32XX_HSU_BRK_INT) {
+                /* Break received */
+                writel(LPC32XX_HSU_BRK_INT, LPC32XX_HSUART_IIR(port->membase));
+                port->icount.brk++;
+                uart_handle_break(port);
+        }
+
+        /* Framing error */
+        if (status & LPC32XX_HSU_FE_INT)
+                writel(LPC32XX_HSU_FE_INT, LPC32XX_HSUART_IIR(port->membase));
+
+        if (status & LPC32XX_HSU_RX_OE_INT) {
+                /* Receive FIFO overrun */
+                writel(LPC32XX_HSU_RX_OE_INT,
+                       LPC32XX_HSUART_IIR(port->membase));
+                port->icount.overrun++;
+                if (tty) {
+                        tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+                        tty_schedule_flip(tty);
+                }
+        }
+
+        /* Data received? */
+        if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) {
+                __serial_lpc32xx_rx(port);
+                if (tty)
+                        tty_flip_buffer_push(tty);
+        }
+
+        /* Transmit data request? */
+        if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) {
+                writel(LPC32XX_HSU_TX_INT, LPC32XX_HSUART_IIR(port->membase));
+                __serial_lpc32xx_tx(port);
+        }
+
+        spin_unlock(&port->lock);
+        tty_kref_put(tty);
+
+        return IRQ_HANDLED;
+}
+
+/* port->lock is not held.  */
+static unsigned int serial_lpc32xx_tx_empty(struct uart_port *port)
+{
+        unsigned int ret = 0;
+
+        if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(port->membase))) == 0)
+                ret = TIOCSER_TEMT;
+
+        return ret;
+}
+
+/* port->lock held by caller.  */
+static void serial_lpc32xx_set_mctrl(struct uart_port *port,
+                                     unsigned int mctrl)
+{
+        /* No signals are supported on HS UARTs */
+}
+
+/* port->lock is held by caller and interrupts are disabled.  */
+static unsigned int serial_lpc32xx_get_mctrl(struct uart_port *port)
+{
+        /* No signals are supported on HS UARTs */
+        return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/* port->lock held by caller.  */
+static void serial_lpc32xx_stop_tx(struct uart_port *port)
+{
+        u32 tmp;
+
+        tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+        tmp &= ~LPC32XX_HSU_TX_INT_EN;
+        writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+}
+
+/* port->lock held by caller.  */
+static void serial_lpc32xx_start_tx(struct uart_port *port)
+{
+        u32 tmp;
+
+        __serial_lpc32xx_tx(port);
+        tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+        tmp |= LPC32XX_HSU_TX_INT_EN;
+        writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+}
+
+/* port->lock held by caller.  */
+static void serial_lpc32xx_stop_rx(struct uart_port *port)
+{
+        u32 tmp;
+
+        tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+        tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
+        writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+        writel((LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT |
+                LPC32XX_HSU_FE_INT), LPC32XX_HSUART_IIR(port->membase));
+}
+
+/* port->lock held by caller.  */
+static void serial_lpc32xx_enable_ms(struct uart_port *port)
+{
+        /* Modem status is not supported */
+}
+
+/* port->lock is not held.  */
+static void serial_lpc32xx_break_ctl(struct uart_port *port,
+                                     int break_state)
+{
+        unsigned long flags;
+        u32 tmp;
+
+        spin_lock_irqsave(&port->lock, flags);
+        tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+        if (break_state != 0)
+                tmp |= LPC32XX_HSU_BREAK;
+        else
+                tmp &= ~LPC32XX_HSU_BREAK;
+        writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+        spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+        int bit;
+        u32 tmp;
+
+        switch (mapbase) {
+        case LPC32XX_HS_UART1_BASE:
+                bit = 0;
+                break;
+        case LPC32XX_HS_UART2_BASE:
+                bit = 1;
+                break;
+        case LPC32XX_HS_UART7_BASE:
+                bit = 6;
+                break;
+        default:
+                WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+                return;
+        }
+
+        tmp = readl(LPC32XX_UARTCTL_CLOOP);
+        if (state)
+                tmp |= (1 << bit);
+        else
+                tmp &= ~(1 << bit);
+        writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+
+/* port->lock is not held.  */
+static int serial_lpc32xx_startup(struct uart_port *port)
+{
+        int retval;
+        unsigned long flags;
+        u32 tmp;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        __serial_uart_flush(port);
+
+        writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
+                LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
+               LPC32XX_HSUART_IIR(port->membase));
+
+        writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
+
+        /*
+         * Set receiver timeout, HSU offset of 20, no break, no interrupts,
+         * and default FIFO trigger levels
+         */
+        tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+                LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
+        writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+        lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */
+
+        spin_unlock_irqrestore(&port->lock, flags);
+
+        retval = request_irq(port->irq, serial_lpc32xx_interrupt,
+                             0, MODNAME, port);
+        if (!retval)
+                writel((tmp | LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN),
+                       LPC32XX_HSUART_CTRL(port->membase));
+
+        return retval;
+}
+
+/* port->lock is not held.  */
+static void serial_lpc32xx_shutdown(struct uart_port *port)
+{
+        u32 tmp;
+        unsigned long flags;
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+                LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
+        writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+        lpc32xx_loopback_set(port->mapbase, 1); /* go to loopback mode */
+
+        spin_unlock_irqrestore(&port->lock, flags);
+
+        free_irq(port->irq, port);
+}
+
+/* port->lock is not held.  */
+static void serial_lpc32xx_set_termios(struct uart_port *port,
+                                       struct ktermios *termios,
+                                       struct ktermios *old)
+{
+        unsigned long flags;
+        unsigned int baud, quot;
+        u32 tmp;
+
+        /* Always 8-bit, no parity, 1 stop bit */
+        termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
+        termios->c_cflag |= CS8;
+
+        termios->c_cflag &= ~(HUPCL | CMSPAR | CLOCAL | CRTSCTS);
+
+        baud = uart_get_baud_rate(port, termios, old, 0,
+                                  port->uartclk / 14);
+
+        quot = __serial_get_clock_div(port->uartclk, baud);
+
+        spin_lock_irqsave(&port->lock, flags);
+
+        /* Ignore characters? */
+        tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+        if ((termios->c_cflag & CREAD) == 0)
+                tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
+        else
+                tmp |= LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN;
+        writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+        writel(quot, LPC32XX_HSUART_RATE(port->membase));
+
+        uart_update_timeout(port, termios->c_cflag, baud);
+
+        spin_unlock_irqrestore(&port->lock, flags);
+
+        /* Don't rewrite B0 */
+        if (tty_termios_baud_rate(termios))
+                tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static const char *serial_lpc32xx_type(struct uart_port *port)
+{
+        return MODNAME;
+}
+
+static void serial_lpc32xx_release_port(struct uart_port *port)
+{
+        if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
+                if (port->flags & UPF_IOREMAP) {
+                        iounmap(port->membase);
+                        port->membase = NULL;
+                }
+
+                release_mem_region(port->mapbase, SZ_4K);
+        }
+}
+
+static int serial_lpc32xx_request_port(struct uart_port *port)
+{
+        int ret = -ENODEV;
+
+        if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
+                ret = 0;
+
+                if (!request_mem_region(port->mapbase, SZ_4K, MODNAME))
+                        ret = -EBUSY;
+                else if (port->flags & UPF_IOREMAP) {
+                        port->membase = ioremap(port->mapbase, SZ_4K);
+                        if (!port->membase) {
+                                release_mem_region(port->mapbase, SZ_4K);
+                                ret = -ENOMEM;
+                        }
+                }
+        }
+
+        return ret;
+}
+
+static void serial_lpc32xx_config_port(struct uart_port *port, int uflags)
+{
+        int ret;
+
+        ret = serial_lpc32xx_request_port(port);
+        if (ret < 0)
+                return;
+        port->type = PORT_UART00;
+        port->fifosize = 64;
+
+        __serial_uart_flush(port);
+
+        writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
+                LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
+               LPC32XX_HSUART_IIR(port->membase));
+
+        writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
+
+        /* Set receiver timeout, HSU offset of 20, no break, no interrupts,
+           and default FIFO trigger levels */
+        writel(LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+               LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B,
+               LPC32XX_HSUART_CTRL(port->membase));
+}
+
+static int serial_lpc32xx_verify_port(struct uart_port *port,
+                                      struct serial_struct *ser)
+{
+        int ret = 0;
+
+        if (ser->type != PORT_UART00)
+                ret = -EINVAL;
+
+        return ret;
+}
+
+static struct uart_ops serial_lpc32xx_pops = {
+        .tx_empty       = serial_lpc32xx_tx_empty,
+        .set_mctrl      = serial_lpc32xx_set_mctrl,
+        .get_mctrl      = serial_lpc32xx_get_mctrl,
+        .stop_tx        = serial_lpc32xx_stop_tx,
+        .start_tx       = serial_lpc32xx_start_tx,
+        .stop_rx        = serial_lpc32xx_stop_rx,
+        .enable_ms      = serial_lpc32xx_enable_ms,
+        .break_ctl      = serial_lpc32xx_break_ctl,
+        .startup        = serial_lpc32xx_startup,
+        .shutdown       = serial_lpc32xx_shutdown,
+        .set_termios    = serial_lpc32xx_set_termios,
+        .type           = serial_lpc32xx_type,
+        .release_port   = serial_lpc32xx_release_port,
+        .request_port   = serial_lpc32xx_request_port,
+        .config_port    = serial_lpc32xx_config_port,
+        .verify_port    = serial_lpc32xx_verify_port,
+};
+
+/*
+ * Register a set of serial devices attached to a platform device
+ */
+static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev)
+{
+        struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered];
+        int ret = 0;
+        struct resource *res;
+
+        if (uarts_registered >= MAX_PORTS) {
+                dev_err(&pdev->dev,
+                        "Error: Number of possible ports exceeded (%d)!\n",
+                        uarts_registered + 1);
+                return -ENXIO;
+        }
+
+        memset(p, 0, sizeof(*p));
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_err(&pdev->dev,
+                        "Error getting mem resource for HS UART port %d\n",
+                        uarts_registered);
+                return -ENXIO;
+        }
+        p->port.mapbase = res->start;
+        p->port.membase = NULL;
+
+        p->port.irq = platform_get_irq(pdev, 0);
+        if (p->port.irq < 0) {
+                dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
+                        uarts_registered);
+                return p->port.irq;
+        }
+
+        p->port.iotype = UPIO_MEM32;
+        p->port.uartclk = LPC32XX_MAIN_OSC_FREQ;
+        p->port.regshift = 2;
+        p->port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+        p->port.dev = &pdev->dev;
+        p->port.ops = &serial_lpc32xx_pops;
+        p->port.line = uarts_registered++;
+        spin_lock_init(&p->port.lock);
+
+        /* send port to loopback mode by default */
+        lpc32xx_loopback_set(p->port.mapbase, 1);
+
+        ret = uart_add_one_port(&lpc32xx_hs_reg, &p->port);
+
+        platform_set_drvdata(pdev, p);
+
+        return ret;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial_hs_lpc32xx_remove(struct platform_device *pdev)
+{
+        struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+        uart_remove_one_port(&lpc32xx_hs_reg, &p->port);
+
+        return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int serial_hs_lpc32xx_suspend(struct platform_device *pdev,
+                                     pm_message_t state)
+{
+        struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+        uart_suspend_port(&lpc32xx_hs_reg, &p->port);
+
+        return 0;
+}
+
+static int serial_hs_lpc32xx_resume(struct platform_device *pdev)
+{
+        struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+        uart_resume_port(&lpc32xx_hs_reg, &p->port);
+
+        return 0;
+}
+#else
+#define serial_hs_lpc32xx_suspend       NULL
+#define serial_hs_lpc32xx_resume        NULL
+#endif
+
+static const struct of_device_id serial_hs_lpc32xx_dt_ids[] = {
+        { .compatible = "nxp,lpc3220-hsuart" },
+        { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
+
+static struct platform_driver serial_hs_lpc32xx_driver = {
+        .probe          = serial_hs_lpc32xx_probe,
+        .remove         = __devexit_p(serial_hs_lpc32xx_remove),
+        .suspend        = serial_hs_lpc32xx_suspend,
+        .resume         = serial_hs_lpc32xx_resume,
+        .driver         = {
+                .name   = MODNAME,
+                .owner  = THIS_MODULE,
+                .of_match_table = serial_hs_lpc32xx_dt_ids,
+        },
+};
+
+static int __init lpc32xx_hsuart_init(void)
+{
+        int ret;
+
+        ret = uart_register_driver(&lpc32xx_hs_reg);
+        if (ret)
+                return ret;
+
+        ret = platform_driver_register(&serial_hs_lpc32xx_driver);
+        if (ret)
+                uart_unregister_driver(&lpc32xx_hs_reg);
+
+        return ret;
+}
+
+static void __exit lpc32xx_hsuart_exit(void)
+{
+        platform_driver_unregister(&serial_hs_lpc32xx_driver);
+        uart_unregister_driver(&lpc32xx_hs_reg);
+}
+
+module_init(lpc32xx_hsuart_init);
+module_exit(lpc32xx_hsuart_exit);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NXP LPC32XX High Speed UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index a0703624d5e5..b13949ad3408 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -44,8 +44,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#define PORT_M32R_BASE  PORT_M32R_SIO
-#define PORT_INDEX(x)   (x - PORT_M32R_BASE + 1)
 #define BAUD_RATE       115200
 
 #include <linux/serial_core.h>
@@ -132,22 +130,6 @@ struct irq_info {
 
 static struct irq_info irq_lists[NR_IRQS];
 
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
-        [PORT_UNKNOWN] = {
-                .name                   = "unknown",
-                .dfl_xmit_fifo_size     = 1,
-                .flags                  = 0,
-        },
-        [PORT_INDEX(PORT_M32R_SIO)] = {
-                .name                   = "M32RSIO",
-                .dfl_xmit_fifo_size     = 1,
-                .flags                  = 0,
-        },
-};
-
 #ifdef CONFIG_SERIAL_M32R_PLDSIO
 
 #define __sio_in(x) inw((unsigned long)(x))
@@ -907,8 +889,7 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
 
         spin_lock_irqsave(&up->port.lock, flags);
 
-        up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
-        up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+        up->port.fifosize = 1;
 
         spin_unlock_irqrestore(&up->port.lock, flags);
 }
@@ -916,23 +897,11 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
 static int
 m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-        if (ser->irq >= nr_irqs || ser->irq < 0 ||
-            ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
-            ser->type >= ARRAY_SIZE(uart_config))
+        if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600)
                 return -EINVAL;
         return 0;
 }
 
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
-        int type = port->type;
-
-        if (type >= ARRAY_SIZE(uart_config))
-                type = 0;
-        return uart_config[type].name;
-}
-
 static struct uart_ops m32r_sio_pops = {
         .tx_empty       = m32r_sio_tx_empty,
         .set_mctrl      = m32r_sio_set_mctrl,
@@ -946,7 +915,6 @@ static struct uart_ops m32r_sio_pops = {
         .shutdown       = m32r_sio_shutdown,
         .set_termios    = m32r_sio_set_termios,
         .pm             = m32r_sio_pm,
-        .type           = m32r_sio_type,
         .release_port   = m32r_sio_release_port,
         .request_port   = m32r_sio_request_port,
         .config_port    = m32r_sio_config_port,
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index b4902b99cfd2..46043c2521ce 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -910,17 +910,7 @@ static struct spi_driver max3100_driver = {
         .resume         = max3100_resume,
 };
 
-static int __init max3100_init(void)
-{
-        return spi_register_driver(&max3100_driver);
-}
-module_init(max3100_init);
-
-static void __exit max3100_exit(void)
-{
-        spi_unregister_driver(&max3100_driver);
-}
-module_exit(max3100_exit);
+module_spi_driver(max3100_driver);
 
 MODULE_DESCRIPTION("MAX3100 driver");
 MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
deleted file mode 100644
index 17c7ba805d98..000000000000
--- a/drivers/tty/serial/max3107.c
+++ /dev/null
@@ -1,1215 +0,0 @@
-/*
- *  max3107.c - spi uart protocol driver for Maxim 3107
- *  Based on max3100.c
- *      by Christian Pellegrin <chripell@evolware.org>
- *  and max3110.c
- *      by Feng Tang <feng.tang@intel.com>
- *
- *  Copyright (C) Aavamobile 2009
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/freezer.h>
-#include <linux/module.h>
-#include "max3107.h"
-
-static const struct baud_table brg26_ext[] = {
-        { 300,    MAX3107_BRG26_B300 },
-        { 600,    MAX3107_BRG26_B600 },
-        { 1200,   MAX3107_BRG26_B1200 },
-        { 2400,   MAX3107_BRG26_B2400 },
-        { 4800,   MAX3107_BRG26_B4800 },
-        { 9600,   MAX3107_BRG26_B9600 },
-        { 19200,  MAX3107_BRG26_B19200 },
-        { 57600,  MAX3107_BRG26_B57600 },
-        { 115200, MAX3107_BRG26_B115200 },
-        { 230400, MAX3107_BRG26_B230400 },
-        { 460800, MAX3107_BRG26_B460800 },
-        { 921600, MAX3107_BRG26_B921600 },
-        { 0, 0 }
-};
-
-static const struct baud_table brg13_int[] = {
-        { 300,    MAX3107_BRG13_IB300 },
-        { 600,    MAX3107_BRG13_IB600 },
-        { 1200,   MAX3107_BRG13_IB1200 },
-        { 2400,   MAX3107_BRG13_IB2400 },
-        { 4800,   MAX3107_BRG13_IB4800 },
-        { 9600,   MAX3107_BRG13_IB9600 },
-        { 19200,  MAX3107_BRG13_IB19200 },
-        { 57600,  MAX3107_BRG13_IB57600 },
-        { 115200, MAX3107_BRG13_IB115200 },
-        { 230400, MAX3107_BRG13_IB230400 },
-        { 460800, MAX3107_BRG13_IB460800 },
-        { 921600, MAX3107_BRG13_IB921600 },
-        { 0, 0 }
-};
-
-static u32 get_new_brg(int baud, struct max3107_port *s)
-{
-        int i;
-        const struct baud_table *baud_tbl = s->baud_tbl;
-
-        for (i = 0; i < 13; i++) {
-                if (baud == baud_tbl[i].baud)
-                        return baud_tbl[i].new_brg;
-        }
-
-        return 0;
-}
-
-/* Perform SPI transfer for write/read of device register(s) */
-int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
-{
-        struct spi_message spi_msg;
-        struct spi_transfer spi_xfer;
-
-        /* Initialize SPI ,message */
-        spi_message_init(&spi_msg);
-
-        /* Initialize SPI transfer */
-        memset(&spi_xfer, 0, sizeof spi_xfer);
-        spi_xfer.len = len;
-        spi_xfer.tx_buf = tx;
-        spi_xfer.rx_buf = rx;
-        spi_xfer.speed_hz = MAX3107_SPI_SPEED;
-
-        /* Add SPI transfer to SPI message */
-        spi_message_add_tail(&spi_xfer, &spi_msg);
-
-#ifdef DBG_TRACE_SPI_DATA
-        {
-                int i;
-                pr_info("tx len %d:\n", spi_xfer.len);
-                for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
-                        pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]);
-                pr_info("\n");
-        }
-#endif
-
-        /* Perform synchronous SPI transfer */
-        if (spi_sync(s->spi, &spi_msg)) {
-                dev_err(&s->spi->dev, "spi_sync failure\n");
-                return -EIO;
-        }
-
-#ifdef DBG_TRACE_SPI_DATA
-        if (spi_xfer.rx_buf) {
-                int i;
-                pr_info("rx len %d:\n", spi_xfer.len);
-                for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
-                        pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]);
-                pr_info("\n");
-        }
-#endif
-        return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_rw);
-
-/* Puts received data to circular buffer */
-static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data,
-                                        int len)
-{
-        struct uart_port *port = &s->port;
-        struct tty_struct *tty;
-
-        if (!port->state)
-                return;
-
-        tty = port->state->port.tty;
-        if (!tty)
-                return;
-
-        /* Insert received data */
-        tty_insert_flip_string(tty, data, len);
-        /* Update RX counter */
-        port->icount.rx += len;
-}
-
-/* Handle data receiving */
-static void max3107_handlerx(struct max3107_port *s, u16 rxlvl)
-{
-        int i;
-        int j;
-        int len;                                /* SPI transfer buffer length */
-        u16 *buf;
-        u8 *valid_str;
-
-        if (!s->rx_enabled)
-                /* RX is disabled */
-                return;
-
-        if (rxlvl == 0) {
-                /* RX fifo is empty */
-                return;
-        } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) {
-                dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl);
-                /* Ensure sanity of RX level */
-                rxlvl = MAX3107_RX_FIFO_SIZE;
-        }
-        if ((s->rxbuf == 0) || (s->rxstr == 0)) {
-                dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n");
-                return;
-        }
-        buf = s->rxbuf;
-        valid_str = s->rxstr;
-        while (rxlvl) {
-                pr_debug("rxlvl %d\n", rxlvl);
-                /* Clear buffer */
-                memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2));
-                len = 0;
-                if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) {
-                        /* First disable RX FIFO interrupt */
-                        pr_debug("Disabling RX INT\n");
-                        buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
-                        s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT;
-                        buf[0] |= s->irqen_reg;
-                        len++;
-                }
-                /* Just increase the length by amount of words in FIFO since
-                 * buffer was zeroed and SPI transfer of 0x0000 means reading
-                 * from RX FIFO
-                 */
-                len += rxlvl;
-                /* Append RX level query */
-                buf[len] = MAX3107_RXFIFOLVL_REG;
-                len++;
-
-                /* Perform the SPI transfer */
-                if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) {
-                        dev_err(&s->spi->dev, "SPI transfer for RX h failed\n");
-                        return;
-                }
-
-                /* Skip RX FIFO interrupt disabling word if it was added */
-                j = ((len - 1) - rxlvl);
-                /* Read received words */
-                for (i = 0; i < rxlvl; i++, j++)
-                        valid_str[i] = (u8)buf[j];
-                put_data_to_circ_buf(s, valid_str, rxlvl);
-                /* Get new RX level */
-                rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK);
-        }
-
-        if (s->rx_enabled) {
-                /* RX still enabled, re-enable RX FIFO interrupt */
-                pr_debug("Enabling RX INT\n");
-                buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
-                s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
-                buf[0] |= s->irqen_reg;
-                if (max3107_rw(s, (u8 *)buf, NULL, 2))
-                        dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n");
-        }
-
-        /* Push the received data to receivers */
-        if (s->port.state->port.tty)
-                tty_flip_buffer_push(s->port.state->port.tty);
-}
-
-
-/* Handle data sending */
-static void max3107_handletx(struct max3107_port *s)
-{
-        struct circ_buf *xmit = &s->port.state->xmit;
-        int i;
-        unsigned long flags;
-        int len;                                /* SPI transfer buffer length */
-        u16 *buf;
-
-        if (!s->tx_fifo_empty)
-                /* Don't send more data before previous data is sent */
-                return;
-
-        if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
-                /* No data to send or TX is stopped */
-                return;
-
-        if (!s->txbuf) {
-                dev_warn(&s->spi->dev, "Txbuf isn't ready\n");
-                return;
-        }
-        buf = s->txbuf;
-        /* Get length of data pending in circular buffer */
-        len = uart_circ_chars_pending(xmit);
-        if (len) {
-                /* Limit to size of TX FIFO */
-                if (len > MAX3107_TX_FIFO_SIZE)
-                        len = MAX3107_TX_FIFO_SIZE;
-
-                pr_debug("txlen %d\n", len);
-
-                /* Update TX counter */
-                s->port.icount.tx += len;
-
-                /* TX FIFO will no longer be empty */
-                s->tx_fifo_empty = 0;
-
-                i = 0;
-                if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) {
-                        /* First disable TX empty interrupt */
-                        pr_debug("Disabling TE INT\n");
-                        buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
-                        s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT;
-                        buf[i] |= s->irqen_reg;
-                        i++;
-                        len++;
-                }
-                /* Add data to send */
-                spin_lock_irqsave(&s->port.lock, flags);
-                for ( ; i < len ; i++) {
-                        buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG);
-                        buf[i] |= ((u16)xmit->buf[xmit->tail] &
-                                                MAX3107_SPI_TX_DATA_MASK);
-                        xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-                }
-                spin_unlock_irqrestore(&s->port.lock, flags);
-                if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) {
-                        /* Enable TX empty interrupt */
-                        pr_debug("Enabling TE INT\n");
-                        buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
-                        s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT;
-                        buf[i] |= s->irqen_reg;
-                        i++;
-                        len++;
-                }
-                if (!s->tx_enabled) {
-                        /* Enable TX */
-                        pr_debug("Enable TX\n");
-                        buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
-                        spin_lock_irqsave(&s->data_lock, flags);
-                        s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT;
-                        buf[i] |= s->mode1_reg;
-                        spin_unlock_irqrestore(&s->data_lock, flags);
-                        s->tx_enabled = 1;
-                        i++;
-                        len++;
-                }
-
-                /* Perform the SPI transfer */
-                if (max3107_rw(s, (u8 *)buf, NULL, len*2)) {
-                        dev_err(&s->spi->dev,
-                                "SPI transfer TX handling failed\n");
-                        return;
-                }
-        }
-
-        /* Indicate wake up if circular buffer is getting low on data */
-        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-                uart_write_wakeup(&s->port);
-
-}
-
-/* Handle interrupts
- * Also reads and returns current RX FIFO level
- */
-static u16 handle_interrupt(struct max3107_port *s)
-{
-        u16 buf[4];     /* Buffer for SPI transfers */
-        u8 irq_status;
-        u16 rx_level;
-        unsigned long flags;
-
-        /* Read IRQ status register */
-        buf[0] = MAX3107_IRQSTS_REG;
-        /* Read status IRQ status register */
-        buf[1] = MAX3107_STS_IRQSTS_REG;
-        /* Read LSR IRQ status register */
-        buf[2] = MAX3107_LSR_IRQSTS_REG;
-        /* Query RX level */
-        buf[3] = MAX3107_RXFIFOLVL_REG;
-
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) {
-                dev_err(&s->spi->dev,
-                        "SPI transfer for INTR handling failed\n");
-                return 0;
-        }
-
-        irq_status = (u8)buf[0];
-        pr_debug("IRQSTS %x\n", irq_status);
-        rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK);
-
-        if (irq_status & MAX3107_IRQ_LSR_BIT) {
-                /* LSR interrupt */
-                if (buf[2] & MAX3107_LSR_RXTO_BIT)
-                        /* RX timeout interrupt,
-                         * handled by normal RX handling
-                         */
-                        pr_debug("RX TO INT\n");
-        }
-
-        if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) {
-                /* Tx empty interrupt,
-                 * disable TX and set tx_fifo_empty flag
-                 */
-                pr_debug("TE INT, disabling TX\n");
-                buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
-                spin_lock_irqsave(&s->data_lock, flags);
-                s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
-                buf[0] |= s->mode1_reg;
-                spin_unlock_irqrestore(&s->data_lock, flags);
-                if (max3107_rw(s, (u8 *)buf, NULL, 2))
-                        dev_err(&s->spi->dev, "SPI transfer TX dis failed\n");
-                s->tx_enabled = 0;
-                s->tx_fifo_empty = 1;
-        }
-
-        if (irq_status & MAX3107_IRQ_RXFIFO_BIT)
-                /* RX FIFO interrupt,
-                 * handled by normal RX handling
-                 */
-                pr_debug("RFIFO INT\n");
-
-        /* Return RX level */
-        return rx_level;
-}
-
-/* Trigger work thread*/
-static void max3107_dowork(struct max3107_port *s)
-{
-        if (!work_pending(&s->work) && !freezing(current) && !s->suspended)
-                queue_work(s->workqueue, &s->work);
-        else
-                dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n");
-}
-
-/* Work thread */
-static void max3107_work(struct work_struct *w)
-{
-        struct max3107_port *s = container_of(w, struct max3107_port, work);
-        u16 rxlvl = 0;
-        int len;        /* SPI transfer buffer length */
-        u16 buf[5];     /* Buffer for SPI transfers */
-        unsigned long flags;
-
-        /* Start by reading current RX FIFO level */
-        buf[0] = MAX3107_RXFIFOLVL_REG;
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-                dev_err(&s->spi->dev, "SPI transfer RX lev failed\n");
-                rxlvl = 0;
-        } else {
-                rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK);
-        }
-
-        do {
-                pr_debug("rxlvl %d\n", rxlvl);
-
-                /* Handle RX */
-                max3107_handlerx(s, rxlvl);
-                rxlvl = 0;
-
-                if (s->handle_irq) {
-                        /* Handle pending interrupts
-                         * We also get new RX FIFO level since new data may
-                         * have been received while pushing received data to
-                         * receivers
-                         */
-                        s->handle_irq = 0;
-                        rxlvl = handle_interrupt(s);
-                }
-
-                /* Handle TX */
-                max3107_handletx(s);
-
-                /* Handle configuration changes */
-                len = 0;
-                spin_lock_irqsave(&s->data_lock, flags);
-                if (s->mode1_commit) {
-                        pr_debug("mode1_commit\n");
-                        buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
-                        buf[len++] |= s->mode1_reg;
-                        s->mode1_commit = 0;
-                }
-                if (s->lcr_commit) {
-                        pr_debug("lcr_commit\n");
-                        buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG);
-                        buf[len++] |= s->lcr_reg;
-                        s->lcr_commit = 0;
-                }
-                if (s->brg_commit) {
-                        pr_debug("brg_commit\n");
-                        buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG);
-                        buf[len++] |= ((s->brg_cfg >> 16) &
-                                                MAX3107_SPI_TX_DATA_MASK);
-                        buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG);
-                        buf[len++] |= ((s->brg_cfg >> 8) &
-                                                MAX3107_SPI_TX_DATA_MASK);
-                        buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG);
-                        buf[len++] |= ((s->brg_cfg) & 0xff);
-                        s->brg_commit = 0;
-                }
-                spin_unlock_irqrestore(&s->data_lock, flags);
-
-                if (len > 0) {
-                        if (max3107_rw(s, (u8 *)buf, NULL, len * 2))
-                                dev_err(&s->spi->dev,
-                                        "SPI transfer config failed\n");
-                }
-
-                /* Reloop if interrupt handling indicated data in RX FIFO */
-        } while (rxlvl);
-
-}
-
-/* Set sleep mode */
-static void max3107_set_sleep(struct max3107_port *s, int mode)
-{
-        u16 buf[1];     /* Buffer for SPI transfer */
-        unsigned long flags;
-        pr_debug("enter, mode %d\n", mode);
-
-        buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
-        spin_lock_irqsave(&s->data_lock, flags);
-        switch (mode) {
-        case MAX3107_DISABLE_FORCED_SLEEP:
-                        s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT;
-                        break;
-        case MAX3107_ENABLE_FORCED_SLEEP:
-                        s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT;
-                        break;
-        case MAX3107_DISABLE_AUTOSLEEP:
-                        s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT;
-                        break;
-        case MAX3107_ENABLE_AUTOSLEEP:
-                        s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT;
-                        break;
-        default:
-                spin_unlock_irqrestore(&s->data_lock, flags);
-                dev_warn(&s->spi->dev, "invalid sleep mode\n");
-                return;
-        }
-        buf[0] |= s->mode1_reg;
-        spin_unlock_irqrestore(&s->data_lock, flags);
-
-        if (max3107_rw(s, (u8 *)buf, NULL, 2))
-                dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n");
-
-        if (mode == MAX3107_DISABLE_AUTOSLEEP ||
-                        mode == MAX3107_DISABLE_FORCED_SLEEP)
-                msleep(MAX3107_WAKEUP_DELAY);
-}
-
-/* Perform full register initialization */
-static void max3107_register_init(struct max3107_port *s)
-{
-        u16 buf[11];    /* Buffer for SPI transfers */
-
-        /* 1. Configure baud rate, 9600 as default */
-        s->baud = 9600;
-        /* the below is default*/
-        if (s->ext_clk) {
-                s->brg_cfg = MAX3107_BRG26_B9600;
-                s->baud_tbl = (struct baud_table *)brg26_ext;
-        } else {
-                s->brg_cfg = MAX3107_BRG13_IB9600;
-                s->baud_tbl = (struct baud_table *)brg13_int;
-        }
-
-        if (s->pdata->init)
-                s->pdata->init(s);
-
-        buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG)
-                | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK);
-        buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG)
-                | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK);
-        buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG)
-                | ((s->brg_cfg) & 0xff);
-
-        /* 2. Configure LCR register, 8N1 mode by default */
-        s->lcr_reg = MAX3107_LCR_WORD_LEN_8;
-        buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG)
-                | s->lcr_reg;
-
-        /* 3. Configure MODE 1 register */
-        s->mode1_reg = 0;
-        /* Enable IRQ pin */
-        s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT;
-        /* Disable TX */
-        s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
-        s->tx_enabled = 0;
-        /* RX is enabled */
-        s->rx_enabled = 1;
-        buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG)
-                | s->mode1_reg;
-
-        /* 4. Configure MODE 2 register */
-        buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
-        if (s->loopback) {
-                /* Enable loopback */
-                buf[5] |= MAX3107_MODE2_LOOPBACK_BIT;
-        }
-        /* Reset FIFOs */
-        buf[5] |= MAX3107_MODE2_FIFORST_BIT;
-        s->tx_fifo_empty = 1;
-
-        /* 5. Configure FIFO trigger level register */
-        buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG);
-        /* RX FIFO trigger for 16 words, TX FIFO trigger not used */
-        buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0));
-
-        /* 6. Configure flow control levels */
-        buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG);
-        /* Flow control halt level 96, resume level 48 */
-        buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96));
-
-        /* 7. Configure flow control */
-        buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG);
-        /* Enable auto CTS and auto RTS flow control */
-        buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT);
-
-        /* 8. Configure RX timeout register */
-        buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG);
-        /* Timeout after 48 character intervals */
-        buf[9] |= 0x0030;
-
-        /* 9. Configure LSR interrupt enable register */
-        buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG);
-        /* Enable RX timeout interrupt */
-        buf[10] |= MAX3107_LSR_RXTO_BIT;
-
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, NULL, 22))
-                dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-
-        /* 10. Clear IRQ status register by reading it */
-        buf[0] = MAX3107_IRQSTS_REG;
-
-        /* 11. Configure interrupt enable register */
-        /* Enable LSR interrupt */
-        s->irqen_reg = MAX3107_IRQ_LSR_BIT;
-        /* Enable RX FIFO interrupt */
-        s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
-        buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG)
-                | s->irqen_reg;
-
-        /* 12. Clear FIFO reset that was set in step 6 */
-        buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
-        if (s->loopback) {
-                /* Keep loopback enabled */
-                buf[2] |= MAX3107_MODE2_LOOPBACK_BIT;
-        }
-
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6))
-                dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-
-}
-
-/* IRQ handler */
-static irqreturn_t max3107_irq(int irqno, void *dev_id)
-{
-        struct max3107_port *s = dev_id;
-
-        if (irqno != s->spi->irq) {
-                /* Unexpected IRQ */
-                return IRQ_NONE;
-        }
-
-        /* Indicate irq */
-        s->handle_irq = 1;
-
-        /* Trigger work thread */
-        max3107_dowork(s);
-
-        return IRQ_HANDLED;
-}
-
-/* HW suspension function
- *
- * Currently autosleep is used to decrease current consumption, alternative
- * approach would be to set the chip to reset mode if UART is not being
- * used but that would mess the GPIOs
- *
- */
-void max3107_hw_susp(struct max3107_port *s, int suspend)
-{
-        pr_debug("enter, suspend %d\n", suspend);
-
-        if (suspend) {
-                /* Suspend requested,
-                 * enable autosleep to decrease current consumption
-                 */
-                s->suspended = 1;
-                max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP);
-        } else {
-                /* Resume requested,
-                 * disable autosleep
-                 */
-                s->suspended = 0;
-                max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP);
-        }
-}
-EXPORT_SYMBOL_GPL(max3107_hw_susp);
-
-/* Modem status IRQ enabling */
-static void max3107_enable_ms(struct uart_port *port)
-{
-        /* Modem status not supported */
-}
-
-/* Data send function */
-static void max3107_start_tx(struct uart_port *port)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-
-        /* Trigger work thread for sending data */
-        max3107_dowork(s);
-}
-
-/* Function for checking that there is no pending transfers */
-static unsigned int max3107_tx_empty(struct uart_port *port)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-
-        pr_debug("returning %d\n",
-                  (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit)));
-        return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit);
-}
-
-/* Function for stopping RX */
-static void max3107_stop_rx(struct uart_port *port)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-        unsigned long flags;
-
-        /* Set RX disabled in MODE 1 register */
-        spin_lock_irqsave(&s->data_lock, flags);
-        s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT;
-        s->mode1_commit = 1;
-        spin_unlock_irqrestore(&s->data_lock, flags);
-        /* Set RX disabled */
-        s->rx_enabled = 0;
-        /* Trigger work thread for doing the actual configuration change */
-        max3107_dowork(s);
-}
-
-/* Function for returning control pin states */
-static unsigned int max3107_get_mctrl(struct uart_port *port)
-{
-        /* DCD and DSR are not wired and CTS/RTS is handled automatically
-         * so just indicate DSR and CAR asserted
-         */
-        return TIOCM_DSR | TIOCM_CAR;
-}
-
-/* Function for setting control pin states */
-static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-        /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
-         * so do nothing
-         */
-}
-
-/* Function for configuring UART parameters */
-static void max3107_set_termios(struct uart_port *port,
-                                struct ktermios *termios,
-                                struct ktermios *old)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-        struct tty_struct *tty;
-        int baud;
-        u16 new_lcr = 0;
-        u32 new_brg = 0;
-        unsigned long flags;
-
-        if (!port->state)
-                return;
-
-        tty = port->state->port.tty;
-        if (!tty)
-                return;
-
-        /* Get new LCR register values */
-        /* Word size */
-        if ((termios->c_cflag & CSIZE) == CS7)
-                new_lcr |= MAX3107_LCR_WORD_LEN_7;
-        else
-                new_lcr |= MAX3107_LCR_WORD_LEN_8;
-
-        /* Parity */
-        if (termios->c_cflag & PARENB) {
-                new_lcr |= MAX3107_LCR_PARITY_BIT;
-                if (!(termios->c_cflag & PARODD))
-                        new_lcr |= MAX3107_LCR_EVENPARITY_BIT;
-        }
-
-        /* Stop bits */
-        if (termios->c_cflag & CSTOPB) {
-                /* 2 stop bits */
-                new_lcr |= MAX3107_LCR_STOPLEN_BIT;
-        }
-
-        /* Mask termios capabilities we don't support */
-        termios->c_cflag &= ~CMSPAR;
-
-        /* Set status ignore mask */
-        s->port.ignore_status_mask = 0;
-        if (termios->c_iflag & IGNPAR)
-                s->port.ignore_status_mask |= MAX3107_ALL_ERRORS;
-
-        /* Set low latency to immediately handle pushed data */
-        s->port.state->port.tty->low_latency = 1;
-
-        /* Get new baud rate generator configuration */
-        baud = tty_get_baud_rate(tty);
-
-        spin_lock_irqsave(&s->data_lock, flags);
-        new_brg = get_new_brg(baud, s);
-        /* if can't find the corrent config, use previous */
-        if (!new_brg) {
-                baud = s->baud;
-                new_brg = s->brg_cfg;
-        }
-        spin_unlock_irqrestore(&s->data_lock, flags);
-        tty_termios_encode_baud_rate(termios, baud, baud);
-        s->baud = baud;
-
-        /* Update timeout according to new baud rate */
-        uart_update_timeout(port, termios->c_cflag, baud);
-
-        spin_lock_irqsave(&s->data_lock, flags);
-        if (s->lcr_reg != new_lcr) {
-                s->lcr_reg = new_lcr;
-                s->lcr_commit = 1;
-        }
-        if (s->brg_cfg != new_brg) {
-                s->brg_cfg = new_brg;
-                s->brg_commit = 1;
-        }
-        spin_unlock_irqrestore(&s->data_lock, flags);
-
-        /* Trigger work thread for doing the actual configuration change */
-        max3107_dowork(s);
-}
-
-/* Port shutdown function */
-static void max3107_shutdown(struct uart_port *port)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-
-        if (s->suspended && s->pdata->hw_suspend)
-                s->pdata->hw_suspend(s, 0);
-
-        /* Free the interrupt */
-        free_irq(s->spi->irq, s);
-
-        if (s->workqueue) {
-                /* Flush and destroy work queue */
-                flush_workqueue(s->workqueue);
-                destroy_workqueue(s->workqueue);
-                s->workqueue = NULL;
-        }
-
-        /* Suspend HW */
-        if (s->pdata->hw_suspend)
-                s->pdata->hw_suspend(s, 1);
-}
-
-/* Port startup function */
-static int max3107_startup(struct uart_port *port)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-
-        /* Initialize work queue */
-        s->workqueue = create_freezable_workqueue("max3107");
-        if (!s->workqueue) {
-                dev_err(&s->spi->dev, "Workqueue creation failed\n");
-                return -EBUSY;
-        }
-        INIT_WORK(&s->work, max3107_work);
-
-        /* Setup IRQ */
-        if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING,
-                        "max3107", s)) {
-                dev_err(&s->spi->dev, "IRQ reguest failed\n");
-                destroy_workqueue(s->workqueue);
-                s->workqueue = NULL;
-                return -EBUSY;
-        }
-
-        /* Resume HW */
-        if (s->pdata->hw_suspend)
-                s->pdata->hw_suspend(s, 0);
-
-        /* Init registers */
-        max3107_register_init(s);
-
-        return 0;
-}
-
-/* Port type function */
-static const char *max3107_type(struct uart_port *port)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-        return s->spi->modalias;
-}
-
-/* Port release function */
-static void max3107_release_port(struct uart_port *port)
-{
-        /* Do nothing */
-}
-
-/* Port request function */
-static int max3107_request_port(struct uart_port *port)
-{
-        /* Do nothing */
-        return 0;
-}
-
-/* Port config function */
-static void max3107_config_port(struct uart_port *port, int flags)
-{
-        struct max3107_port *s = container_of(port, struct max3107_port, port);
-        s->port.type = PORT_MAX3107;
-}
-
-/* Port verify function */
-static int max3107_verify_port(struct uart_port *port,
-                                struct serial_struct *ser)
-{
-        if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107)
-                return 0;
-
-        return -EINVAL;
-}
-
-/* Port stop TX function */
-static void max3107_stop_tx(struct uart_port *port)
-{
-        /* Do nothing */
-}
-
-/* Port break control function */
-static void max3107_break_ctl(struct uart_port *port, int break_state)
-{
-        /* We don't support break control, do nothing */
-}
-
-
-/* Port functions */
-static struct uart_ops max3107_ops = {
-        .tx_empty       = max3107_tx_empty,
-        .set_mctrl      = max3107_set_mctrl,
-        .get_mctrl      = max3107_get_mctrl,
-        .stop_tx        = max3107_stop_tx,
-        .start_tx       = max3107_start_tx,
-        .stop_rx        = max3107_stop_rx,
-        .enable_ms      = max3107_enable_ms,
-        .break_ctl      = max3107_break_ctl,
-        .startup        = max3107_startup,
-        .shutdown       = max3107_shutdown,
-        .set_termios    = max3107_set_termios,
-        .type           = max3107_type,
-        .release_port   = max3107_release_port,
-        .request_port   = max3107_request_port,
-        .config_port    = max3107_config_port,
-        .verify_port    = max3107_verify_port,
-};
-
-/* UART driver data */
-static struct uart_driver max3107_uart_driver = {
-        .owner          = THIS_MODULE,
-        .driver_name    = "ttyMAX",
-        .dev_name       = "ttyMAX",
-        .nr             = 1,
-};
-
-static int driver_registered = 0;
-
-
-
-/* 'Generic' platform data */
-static struct max3107_plat generic_plat_data = {
-        .loopback               = 0,
-        .ext_clk                = 1,
-        .hw_suspend             = max3107_hw_susp,
-        .polled_mode            = 0,
-        .poll_time              = 0,
-};
-
-
-/*******************************************************************/
-
-/**
- *      max3107_probe           -       SPI bus probe entry point
- *      @spi: the spi device
- *
- *      SPI wants us to probe this device and if appropriate claim it.
- *      Perform any platform specific requirements and then initialise
- *      the device.
- */
-
-int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
-{
-        struct max3107_port *s;
-        u16 buf[2];     /* Buffer for SPI transfers */
-        int retval;
-
-        pr_info("enter max3107 probe\n");
-
-        /* Allocate port structure */
-        s = kzalloc(sizeof(*s), GFP_KERNEL);
-        if (!s) {
-                pr_err("Allocating port structure failed\n");
-                return -ENOMEM;
-        }
-
-        s->pdata = pdata;
-
-        /* SPI Rx buffer
-         * +2 for RX FIFO interrupt
-         * disabling and RX level query
-         */
-        s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
-        if (!s->rxbuf) {
-                pr_err("Allocating RX buffer failed\n");
-                retval = -ENOMEM;
-                goto err_free4;
-        }
-        s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
-        if (!s->rxstr) {
-                pr_err("Allocating RX buffer failed\n");
-                retval = -ENOMEM;
-                goto err_free3;
-        }
-        /* SPI Tx buffer
-         * SPI transfer buffer
-         * +3 for TX FIFO empty
-         * interrupt disabling and
-         * enabling and TX enabling
-         */
-        s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
-        if (!s->txbuf) {
-                pr_err("Allocating TX buffer failed\n");
-                retval = -ENOMEM;
-                goto err_free2;
-        }
-        /* Initialize shared data lock */
-        spin_lock_init(&s->data_lock);
-
-        /* SPI intializations */
-        dev_set_drvdata(&spi->dev, s);
-        spi->mode = SPI_MODE_0;
-        spi->dev.platform_data = pdata;
-        spi->bits_per_word = 16;
-        s->ext_clk = pdata->ext_clk;
-        s->loopback = pdata->loopback;
-        spi_setup(spi);
-        s->spi = spi;
-
-        /* Check REV ID to ensure we are talking to what we expect */
-        buf[0] = MAX3107_REVID_REG;
-        if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-                dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
-                retval = -EIO;
-                goto err_free1;
-        }
-        if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
-                (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
-                dev_err(&s->spi->dev, "REVID %x does not match\n",
-                                (buf[0] & MAX3107_SPI_RX_DATA_MASK));
-                retval = -ENODEV;
-                goto err_free1;
-        }
-
-        /* Disable all interrupts */
-        buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000);
-        buf[0] |= 0x0000;
-
-        /* Configure clock source */
-        buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG);
-        if (s->ext_clk) {
-                /* External clock */
-                buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT;
-        }
-
-        /* PLL bypass ON */
-        buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT;
-
-        /* Perform SPI transfer */
-        if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
-                dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-                retval = -EIO;
-                goto err_free1;
-        }
-
-        /* Register UART driver */
-        if (!driver_registered) {
-                retval = uart_register_driver(&max3107_uart_driver);
-                if (retval) {
-                        dev_err(&s->spi->dev, "Registering UART driver failed\n");
-                        goto err_free1;
-                }
-                driver_registered = 1;
-        }
-
-        /* Initialize UART port data */
-        s->port.fifosize = 128;
-        s->port.ops = &max3107_ops;
-        s->port.line = 0;
-        s->port.dev = &spi->dev;
-        s->port.uartclk = 9600;
-        s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
-        s->port.irq = s->spi->irq;
-        s->port.type = PORT_MAX3107;
-
-        /* Add UART port */
-        retval = uart_add_one_port(&max3107_uart_driver, &s->port);
-        if (retval < 0) {
-                dev_err(&s->spi->dev, "Adding UART port failed\n");
-                goto err_free1;
-        }
-
-        if (pdata->configure) {
-                retval = pdata->configure(s);
-                if (retval < 0)
-                        goto err_free1;
-        }
-
-        /* Go to suspend mode */
-        if (pdata->hw_suspend)
-                pdata->hw_suspend(s, 1);
-
-        return 0;
-
-err_free1:
-        kfree(s->txbuf);
-err_free2:
-        kfree(s->rxstr);
-err_free3:
-        kfree(s->rxbuf);
-err_free4:
-        kfree(s);
-        return retval;
-}
-EXPORT_SYMBOL_GPL(max3107_probe);
-
-/* Driver remove function */
-int max3107_remove(struct spi_device *spi)
-{
-        struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
-        pr_info("enter max3107 remove\n");
-
-        /* Remove port */
-        if (uart_remove_one_port(&max3107_uart_driver, &s->port))
-                dev_warn(&s->spi->dev, "Removing UART port failed\n");
-
-
-        /* Free TxRx buffer */
-        kfree(s->rxbuf);
-        kfree(s->rxstr);
-        kfree(s->txbuf);
-
-        /* Free port structure */
-        kfree(s);
-
-        return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_remove);
-
-/* Driver suspend function */
-int max3107_suspend(struct spi_device *spi, pm_message_t state)
-{
-#ifdef CONFIG_PM
-        struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
-        pr_debug("enter suspend\n");
-
-        /* Suspend UART port */
-        uart_suspend_port(&max3107_uart_driver, &s->port);
-
-        /* Go to suspend mode */
-        if (s->pdata->hw_suspend)
-                s->pdata->hw_suspend(s, 1);
-#endif  /* CONFIG_PM */
-        return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_suspend);
-
-/* Driver resume function */
-int max3107_resume(struct spi_device *spi)
-{
-#ifdef CONFIG_PM
-        struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
-        pr_debug("enter resume\n");
-
-        /* Resume from suspend */
-        if (s->pdata->hw_suspend)
-                s->pdata->hw_suspend(s, 0);
-
-        /* Resume UART port */
-        uart_resume_port(&max3107_uart_driver, &s->port);
-#endif  /* CONFIG_PM */
-        return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_resume);
-
-static int max3107_probe_generic(struct spi_device *spi)
-{
-        return max3107_probe(spi, &generic_plat_data);
-}
-
-/* Spi driver data */
-static struct spi_driver max3107_driver = {
-        .driver = {
-                .name           = "max3107",
-                .owner          = THIS_MODULE,
-        },
-        .probe          = max3107_probe_generic,
-        .remove         = __devexit_p(max3107_remove),
-        .suspend        = max3107_suspend,
-        .resume         = max3107_resume,
-};
-
-/* Driver init function */
-static int __init max3107_init(void)
-{
-        pr_info("enter max3107 init\n");
-        return spi_register_driver(&max3107_driver);
-}
-
-/* Driver exit function */
-static void __exit max3107_exit(void)
-{
-        pr_info("enter max3107 exit\n");
-        /* Unregister UART driver */
-        if (driver_registered)
-                uart_unregister_driver(&max3107_uart_driver);
-        spi_unregister_driver(&max3107_driver);
-}
-
-module_init(max3107_init);
-module_exit(max3107_exit);
-
-MODULE_DESCRIPTION("MAX3107 driver");
-MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("spi:max3107");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h
deleted file mode 100644
index 8415fc723b96..000000000000
--- a/drivers/tty/serial/max3107.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * max3107.h - spi uart protocol driver header for Maxim 3107
- *
- * Copyright (C) Aavamobile 2009
- * Based on serial_max3100.h by Christian Pellegrin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _MAX3107_H
-#define _MAX3107_H
-
-/* Serial error status definitions */
-#define MAX3107_PARITY_ERROR    1
-#define MAX3107_FRAME_ERROR     2
-#define MAX3107_OVERRUN_ERROR   4
-#define MAX3107_ALL_ERRORS      (MAX3107_PARITY_ERROR | \
-                                 MAX3107_FRAME_ERROR | \
-                                 MAX3107_OVERRUN_ERROR)
-
-/* GPIO definitions */
-#define MAX3107_GPIO_BASE       88
-#define MAX3107_GPIO_COUNT      4
-
-
-/* GPIO connected to chip's reset pin */
-#define MAX3107_RESET_GPIO      87
-
-
-/* Chip reset delay */
-#define MAX3107_RESET_DELAY     10
-
-/* Chip wakeup delay */
-#define MAX3107_WAKEUP_DELAY    50
-
-
-/* Sleep mode definitions */
-#define MAX3107_DISABLE_FORCED_SLEEP    0
-#define MAX3107_ENABLE_FORCED_SLEEP     1
-#define MAX3107_DISABLE_AUTOSLEEP       2
-#define MAX3107_ENABLE_AUTOSLEEP        3
-
-
-/* Definitions for register access with SPI transfers
- *
- * SPI transfer format:
- *
- * Master to slave bits xzzzzzzzyyyyyyyy
- * Slave to master bits aaaaaaaabbbbbbbb
- *
- * where:
- * x = 0 for reads, 1 for writes
- * z = register address
- * y = new register value if write, 0 if read
- * a = unspecified
- * b = register value if read, unspecified if write
- */
-
-/* SPI speed */
-#define MAX3107_SPI_SPEED       (3125000 * 2)
-
-/* Write bit */
-#define MAX3107_WRITE_BIT       (1 << 15)
-
-/* SPI TX data mask */
-#define MAX3107_SPI_RX_DATA_MASK        (0x00ff)
-
-/* SPI RX data mask */
-#define MAX3107_SPI_TX_DATA_MASK        (0x00ff)
-
-/* Register access masks */
-#define MAX3107_RHR_REG                 (0x0000) /* RX FIFO */
-#define MAX3107_THR_REG                 (0x0000) /* TX FIFO */
-#define MAX3107_IRQEN_REG               (0x0100) /* IRQ enable */
-#define MAX3107_IRQSTS_REG              (0x0200) /* IRQ status */
-#define MAX3107_LSR_IRQEN_REG           (0x0300) /* LSR IRQ enable */
-#define MAX3107_LSR_IRQSTS_REG          (0x0400) /* LSR IRQ status */
-#define MAX3107_SPCHR_IRQEN_REG         (0x0500) /* Special char IRQ enable */
-#define MAX3107_SPCHR_IRQSTS_REG        (0x0600) /* Special char IRQ status */
-#define MAX3107_STS_IRQEN_REG           (0x0700) /* Status IRQ enable */
-#define MAX3107_STS_IRQSTS_REG          (0x0800) /* Status IRQ status */
-#define MAX3107_MODE1_REG               (0x0900) /* MODE1 */
-#define MAX3107_MODE2_REG               (0x0a00) /* MODE2 */
-#define MAX3107_LCR_REG                 (0x0b00) /* LCR */
-#define MAX3107_RXTO_REG                (0x0c00) /* RX timeout */
-#define MAX3107_HDPIXDELAY_REG          (0x0d00) /* Auto transceiver delays */
-#define MAX3107_IRDA_REG                (0x0e00) /* IRDA settings */
-#define MAX3107_FLOWLVL_REG             (0x0f00) /* Flow control levels */
-#define MAX3107_FIFOTRIGLVL_REG         (0x1000) /* FIFO IRQ trigger levels */
-#define MAX3107_TXFIFOLVL_REG           (0x1100) /* TX FIFO level */
-#define MAX3107_RXFIFOLVL_REG           (0x1200) /* RX FIFO level */
-#define MAX3107_FLOWCTRL_REG            (0x1300) /* Flow control */
-#define MAX3107_XON1_REG                (0x1400) /* XON1 character */
-#define MAX3107_XON2_REG                (0x1500) /* XON2 character */
-#define MAX3107_XOFF1_REG               (0x1600) /* XOFF1 character */
-#define MAX3107_XOFF2_REG               (0x1700) /* XOFF2 character */
-#define MAX3107_GPIOCFG_REG             (0x1800) /* GPIO config */
-#define MAX3107_GPIODATA_REG            (0x1900) /* GPIO data */
-#define MAX3107_PLLCFG_REG              (0x1a00) /* PLL config */
-#define MAX3107_BRGCFG_REG              (0x1b00) /* Baud rate generator conf */
-#define MAX3107_BRGDIVLSB_REG           (0x1c00) /* Baud rate divisor LSB */
-#define MAX3107_BRGDIVMSB_REG           (0x1d00) /* Baud rate divisor MSB */
-#define MAX3107_CLKSRC_REG              (0x1e00) /* Clock source */
-#define MAX3107_REVID_REG               (0x1f00) /* Revision identification */
-
-/* IRQ register bits */
-#define MAX3107_IRQ_LSR_BIT     (1 << 0) /* LSR interrupt */
-#define MAX3107_IRQ_SPCHR_BIT   (1 << 1) /* Special char interrupt */
-#define MAX3107_IRQ_STS_BIT     (1 << 2) /* Status interrupt */
-#define MAX3107_IRQ_RXFIFO_BIT  (1 << 3) /* RX FIFO interrupt */
-#define MAX3107_IRQ_TXFIFO_BIT  (1 << 4) /* TX FIFO interrupt */
-#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
-#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
-#define MAX3107_IRQ_CTS_BIT     (1 << 7) /* CTS interrupt */
-
-/* LSR register bits */
-#define MAX3107_LSR_RXTO_BIT    (1 << 0) /* RX timeout */
-#define MAX3107_LSR_RXOVR_BIT   (1 << 1) /* RX overrun */
-#define MAX3107_LSR_RXPAR_BIT   (1 << 2) /* RX parity error */
-#define MAX3107_LSR_FRERR_BIT   (1 << 3) /* Frame error */
-#define MAX3107_LSR_RXBRK_BIT   (1 << 4) /* RX break */
-#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
-#define MAX3107_LSR_UNDEF6_BIT  (1 << 6) /* Undefined/not used */
-#define MAX3107_LSR_CTS_BIT     (1 << 7) /* CTS pin state */
-
-/* Special character register bits */
-#define MAX3107_SPCHR_XON1_BIT          (1 << 0) /* XON1 character */
-#define MAX3107_SPCHR_XON2_BIT          (1 << 1) /* XON2 character */
-#define MAX3107_SPCHR_XOFF1_BIT         (1 << 2) /* XOFF1 character */
-#define MAX3107_SPCHR_XOFF2_BIT         (1 << 3) /* XOFF2 character */
-#define MAX3107_SPCHR_BREAK_BIT         (1 << 4) /* RX break */
-#define MAX3107_SPCHR_MULTIDROP_BIT     (1 << 5) /* 9-bit multidrop addr char */
-#define MAX3107_SPCHR_UNDEF6_BIT        (1 << 6) /* Undefined/not used */
-#define MAX3107_SPCHR_UNDEF7_BIT        (1 << 7) /* Undefined/not used */
-
-/* Status register bits */
-#define MAX3107_STS_GPIO0_BIT           (1 << 0) /* GPIO 0 interrupt */
-#define MAX3107_STS_GPIO1_BIT           (1 << 1) /* GPIO 1 interrupt */
-#define MAX3107_STS_GPIO2_BIT           (1 << 2) /* GPIO 2 interrupt */
-#define MAX3107_STS_GPIO3_BIT           (1 << 3) /* GPIO 3 interrupt */
-#define MAX3107_STS_UNDEF4_BIT          (1 << 4) /* Undefined/not used */
-#define MAX3107_STS_CLKREADY_BIT        (1 << 5) /* Clock ready */
-#define MAX3107_STS_SLEEP_BIT           (1 << 6) /* Sleep interrupt */
-#define MAX3107_STS_UNDEF7_BIT          (1 << 7) /* Undefined/not used */
-
-/* MODE1 register bits */
-#define MAX3107_MODE1_RXDIS_BIT         (1 << 0) /* RX disable */
-#define MAX3107_MODE1_TXDIS_BIT         (1 << 1) /* TX disable */
-#define MAX3107_MODE1_TXHIZ_BIT         (1 << 2) /* TX pin three-state */
-#define MAX3107_MODE1_RTSHIZ_BIT        (1 << 3) /* RTS pin three-state */
-#define MAX3107_MODE1_TRNSCVCTRL_BIT    (1 << 4) /* Transceiver ctrl enable */
-#define MAX3107_MODE1_FORCESLEEP_BIT    (1 << 5) /* Force sleep mode */
-#define MAX3107_MODE1_AUTOSLEEP_BIT     (1 << 6) /* Auto sleep enable */
-#define MAX3107_MODE1_IRQSEL_BIT        (1 << 7) /* IRQ pin enable */
-
-/* MODE2 register bits */
-#define MAX3107_MODE2_RST_BIT           (1 << 0) /* Chip reset */
-#define MAX3107_MODE2_FIFORST_BIT       (1 << 1) /* FIFO reset */
-#define MAX3107_MODE2_RXTRIGINV_BIT     (1 << 2) /* RX FIFO INT invert */
-#define MAX3107_MODE2_RXEMPTINV_BIT     (1 << 3) /* RX FIFO empty INT invert */
-#define MAX3107_MODE2_SPCHR_BIT         (1 << 4) /* Special chr detect enable */
-#define MAX3107_MODE2_LOOPBACK_BIT      (1 << 5) /* Internal loopback enable */
-#define MAX3107_MODE2_MULTIDROP_BIT     (1 << 6) /* 9-bit multidrop enable */
-#define MAX3107_MODE2_ECHOSUPR_BIT      (1 << 7) /* ECHO suppression enable */
-
-/* LCR register bits */
-#define MAX3107_LCR_LENGTH0_BIT         (1 << 0) /* Word length bit 0 */
-#define MAX3107_LCR_LENGTH1_BIT         (1 << 1) /* Word length bit 1
-                                                  *
-                                                  * Word length bits table:
-                                                  * 00 -> 5 bit words
-                                                  * 01 -> 6 bit words
-                                                  * 10 -> 7 bit words
-                                                  * 11 -> 8 bit words
-                                                  */
-#define MAX3107_LCR_STOPLEN_BIT         (1 << 2) /* STOP length bit
-                                                  *
-                                                  * STOP length bit table:
-                                                  * 0 -> 1 stop bit
-                                                  * 1 -> 1-1.5 stop bits if
-                                                  *      word length is 5,
-                                                  *      2 stop bits otherwise
-                                                  */
-#define MAX3107_LCR_PARITY_BIT          (1 << 3) /* Parity bit enable */
-#define MAX3107_LCR_EVENPARITY_BIT      (1 << 4) /* Even parity bit enable */
-#define MAX3107_LCR_FORCEPARITY_BIT     (1 << 5) /* 9-bit multidrop parity */
-#define MAX3107_LCR_TXBREAK_BIT         (1 << 6) /* TX break enable */
-#define MAX3107_LCR_RTS_BIT             (1 << 7) /* RTS pin control */
-#define MAX3107_LCR_WORD_LEN_5          (0x0000)
-#define MAX3107_LCR_WORD_LEN_6          (0x0001)
-#define MAX3107_LCR_WORD_LEN_7          (0x0002)
-#define MAX3107_LCR_WORD_LEN_8          (0x0003)
-
-
-/* IRDA register bits */
-#define MAX3107_IRDA_IRDAEN_BIT         (1 << 0) /* IRDA mode enable */
-#define MAX3107_IRDA_SIR_BIT            (1 << 1) /* SIR mode enable */
-#define MAX3107_IRDA_SHORTIR_BIT        (1 << 2) /* Short SIR mode enable */
-#define MAX3107_IRDA_MIR_BIT            (1 << 3) /* MIR mode enable */
-#define MAX3107_IRDA_RXINV_BIT          (1 << 4) /* RX logic inversion enable */
-#define MAX3107_IRDA_TXINV_BIT          (1 << 5) /* TX logic inversion enable */
-#define MAX3107_IRDA_UNDEF6_BIT         (1 << 6) /* Undefined/not used */
-#define MAX3107_IRDA_UNDEF7_BIT         (1 << 7) /* Undefined/not used */
-
-/* Flow control trigger level register masks */
-#define MAX3107_FLOWLVL_HALT_MASK       (0x000f) /* Flow control halt level */
-#define MAX3107_FLOWLVL_RES_MASK        (0x00f0) /* Flow control resume level */
-#define MAX3107_FLOWLVL_HALT(words)     ((words/8) & 0x000f)
-#define MAX3107_FLOWLVL_RES(words)      (((words/8) & 0x000f) << 4)
-
-/* FIFO interrupt trigger level register masks */
-#define MAX3107_FIFOTRIGLVL_TX_MASK     (0x000f) /* TX FIFO trigger level */
-#define MAX3107_FIFOTRIGLVL_RX_MASK     (0x00f0) /* RX FIFO trigger level */
-#define MAX3107_FIFOTRIGLVL_TX(words)   ((words/8) & 0x000f)
-#define MAX3107_FIFOTRIGLVL_RX(words)   (((words/8) & 0x000f) << 4)
-
-/* Flow control register bits */
-#define MAX3107_FLOWCTRL_AUTORTS_BIT    (1 << 0) /* Auto RTS flow ctrl enable */
-#define MAX3107_FLOWCTRL_AUTOCTS_BIT    (1 << 1) /* Auto CTS flow ctrl enable */
-#define MAX3107_FLOWCTRL_GPIADDR_BIT    (1 << 2) /* Enables that GPIO inputs
-                                                  * are used in conjunction with
-                                                  * XOFF2 for definition of
-                                                  * special character */
-#define MAX3107_FLOWCTRL_SWFLOWEN_BIT   (1 << 3) /* Auto SW flow ctrl enable */
-#define MAX3107_FLOWCTRL_SWFLOW0_BIT    (1 << 4) /* SWFLOW bit 0 */
-#define MAX3107_FLOWCTRL_SWFLOW1_BIT    (1 << 5) /* SWFLOW bit 1
-                                                  *
-                                                  * SWFLOW bits 1 & 0 table:
-                                                  * 00 -> no transmitter flow
-                                                  *       control
-                                                  * 01 -> receiver compares
-                                                  *       XON2 and XOFF2
-                                                  *       and controls
-                                                  *       transmitter
-                                                  * 10 -> receiver compares
-                                                  *       XON1 and XOFF1
-                                                  *       and controls
-                                                  *       transmitter
-                                                  * 11 -> receiver compares
-                                                  *       XON1, XON2, XOFF1 and
-                                                  *       XOFF2 and controls
-                                                  *       transmitter
-                                                  */
-#define MAX3107_FLOWCTRL_SWFLOW2_BIT    (1 << 6) /* SWFLOW bit 2 */
-#define MAX3107_FLOWCTRL_SWFLOW3_BIT    (1 << 7) /* SWFLOW bit 3
-                                                  *
-                                                  * SWFLOW bits 3 & 2 table:
-                                                  * 00 -> no received flow
-                                                  *       control
-                                                  * 01 -> transmitter generates
-                                                  *       XON2 and XOFF2
-                                                  * 10 -> transmitter generates
-                                                  *       XON1 and XOFF1
-                                                  * 11 -> transmitter generates
-                                                  *       XON1, XON2, XOFF1 and
-                                                  *       XOFF2
-                                                  */
-
-/* GPIO configuration register bits */
-#define MAX3107_GPIOCFG_GP0OUT_BIT      (1 << 0) /* GPIO 0 output enable */
-#define MAX3107_GPIOCFG_GP1OUT_BIT      (1 << 1) /* GPIO 1 output enable */
-#define MAX3107_GPIOCFG_GP2OUT_BIT      (1 << 2) /* GPIO 2 output enable */
-#define MAX3107_GPIOCFG_GP3OUT_BIT      (1 << 3) /* GPIO 3 output enable */
-#define MAX3107_GPIOCFG_GP0OD_BIT       (1 << 4) /* GPIO 0 open-drain enable */
-#define MAX3107_GPIOCFG_GP1OD_BIT       (1 << 5) /* GPIO 1 open-drain enable */
-#define MAX3107_GPIOCFG_GP2OD_BIT       (1 << 6) /* GPIO 2 open-drain enable */
-#define MAX3107_GPIOCFG_GP3OD_BIT       (1 << 7) /* GPIO 3 open-drain enable */
-
-/* GPIO DATA register bits */
-#define MAX3107_GPIODATA_GP0OUT_BIT     (1 << 0) /* GPIO 0 output value */
-#define MAX3107_GPIODATA_GP1OUT_BIT     (1 << 1) /* GPIO 1 output value */
-#define MAX3107_GPIODATA_GP2OUT_BIT     (1 << 2) /* GPIO 2 output value */
-#define MAX3107_GPIODATA_GP3OUT_BIT     (1 << 3) /* GPIO 3 output value */
-#define MAX3107_GPIODATA_GP0IN_BIT      (1 << 4) /* GPIO 0 input value */
-#define MAX3107_GPIODATA_GP1IN_BIT      (1 << 5) /* GPIO 1 input value */
-#define MAX3107_GPIODATA_GP2IN_BIT      (1 << 6) /* GPIO 2 input value */
-#define MAX3107_GPIODATA_GP3IN_BIT      (1 << 7) /* GPIO 3 input value */
-
-/* PLL configuration register masks */
-#define MAX3107_PLLCFG_PREDIV_MASK      (0x003f) /* PLL predivision value */
-#define MAX3107_PLLCFG_PLLFACTOR_MASK   (0x00c0) /* PLL multiplication factor */
-
-/* Baud rate generator configuration register masks and bits */
-#define MAX3107_BRGCFG_FRACT_MASK       (0x000f) /* Fractional portion of
-                                                  * Baud rate generator divisor
-                                                  */
-#define MAX3107_BRGCFG_2XMODE_BIT       (1 << 4) /* Double baud rate */
-#define MAX3107_BRGCFG_4XMODE_BIT       (1 << 5) /* Quadruple baud rate */
-#define MAX3107_BRGCFG_UNDEF6_BIT       (1 << 6) /* Undefined/not used */
-#define MAX3107_BRGCFG_UNDEF7_BIT       (1 << 7) /* Undefined/not used */
-
-/* Clock source register bits */
-#define MAX3107_CLKSRC_INTOSC_BIT       (1 << 0) /* Internal osc enable */
-#define MAX3107_CLKSRC_CRYST_BIT        (1 << 1) /* Crystal osc enable */
-#define MAX3107_CLKSRC_PLL_BIT          (1 << 2) /* PLL enable */
-#define MAX3107_CLKSRC_PLLBYP_BIT       (1 << 3) /* PLL bypass */
-#define MAX3107_CLKSRC_EXTCLK_BIT       (1 << 4) /* External clock enable */
-#define MAX3107_CLKSRC_UNDEF5_BIT       (1 << 5) /* Undefined/not used */
-#define MAX3107_CLKSRC_UNDEF6_BIT       (1 << 6) /* Undefined/not used */
-#define MAX3107_CLKSRC_CLK2RTS_BIT      (1 << 7) /* Baud clk to RTS pin */
-
-
-/* HW definitions */
-#define MAX3107_RX_FIFO_SIZE    128
-#define MAX3107_TX_FIFO_SIZE    128
-#define MAX3107_REVID1          0x00a0
-#define MAX3107_REVID2          0x00a1
-
-
-/* Baud rate generator configuration values for external clock 13MHz */
-#define MAX3107_BRG13_B300      (0x0A9400 | 0x05)
-#define MAX3107_BRG13_B600      (0x054A00 | 0x03)
-#define MAX3107_BRG13_B1200     (0x02A500 | 0x01)
-#define MAX3107_BRG13_B2400     (0x015200 | 0x09)
-#define MAX3107_BRG13_B4800     (0x00A900 | 0x04)
-#define MAX3107_BRG13_B9600     (0x005400 | 0x0A)
-#define MAX3107_BRG13_B19200    (0x002A00 | 0x05)
-#define MAX3107_BRG13_B38400    (0x001500 | 0x03)
-#define MAX3107_BRG13_B57600    (0x000E00 | 0x02)
-#define MAX3107_BRG13_B115200   (0x000700 | 0x01)
-#define MAX3107_BRG13_B230400   (0x000300 | 0x08)
-#define MAX3107_BRG13_B460800   (0x000100 | 0x0c)
-#define MAX3107_BRG13_B921600   (0x000100 | 0x1c)
-
-/* Baud rate generator configuration values for external clock 26MHz */
-#define MAX3107_BRG26_B300      (0x152800 | 0x0A)
-#define MAX3107_BRG26_B600      (0x0A9400 | 0x05)
-#define MAX3107_BRG26_B1200     (0x054A00 | 0x03)
-#define MAX3107_BRG26_B2400     (0x02A500 | 0x01)
-#define MAX3107_BRG26_B4800     (0x015200 | 0x09)
-#define MAX3107_BRG26_B9600     (0x00A900 | 0x04)
-#define MAX3107_BRG26_B19200    (0x005400 | 0x0A)
-#define MAX3107_BRG26_B38400    (0x002A00 | 0x05)
-#define MAX3107_BRG26_B57600    (0x001C00 | 0x03)
-#define MAX3107_BRG26_B115200   (0x000E00 | 0x02)
-#define MAX3107_BRG26_B230400   (0x000700 | 0x01)
-#define MAX3107_BRG26_B460800   (0x000300 | 0x08)
-#define MAX3107_BRG26_B921600   (0x000100 | 0x0C)
-
-/* Baud rate generator configuration values for internal clock */
-#define MAX3107_BRG13_IB300     (0x008000 | 0x00)
-#define MAX3107_BRG13_IB600     (0x004000 | 0x00)
-#define MAX3107_BRG13_IB1200    (0x002000 | 0x00)
-#define MAX3107_BRG13_IB2400    (0x001000 | 0x00)
-#define MAX3107_BRG13_IB4800    (0x000800 | 0x00)
-#define MAX3107_BRG13_IB9600    (0x000400 | 0x00)
-#define MAX3107_BRG13_IB19200   (0x000200 | 0x00)
-#define MAX3107_BRG13_IB38400   (0x000100 | 0x00)
-#define MAX3107_BRG13_IB57600   (0x000000 | 0x0B)
-#define MAX3107_BRG13_IB115200  (0x000000 | 0x05)
-#define MAX3107_BRG13_IB230400  (0x000000 | 0x03)
-#define MAX3107_BRG13_IB460800  (0x000000 | 0x00)
-#define MAX3107_BRG13_IB921600  (0x000000 | 0x00)
-
-
-struct baud_table {
-        int baud;
-        u32 new_brg;
-};
-
-struct max3107_port {
-        /* UART port structure */
-        struct uart_port port;
-
-        /* SPI device structure */
-        struct spi_device *spi;
-
-#if defined(CONFIG_GPIOLIB)
-        /* GPIO chip structure */
-        struct gpio_chip chip;
-#endif
-
-        /* Workqueue that does all the magic */
-        struct workqueue_struct *workqueue;
-        struct work_struct work;
-
-        /* Lock for shared data */
-        spinlock_t data_lock;
-
-        /* Device configuration */
-        int ext_clk;            /* 1 if external clock used */
-        int loopback;           /* Current loopback mode state */
-        int baud;                       /* Current baud rate */
-
-        /* State flags */
-        int suspended;          /* Indicates suspend mode */
-        int tx_fifo_empty;      /* Flag for TX FIFO state */
-        int rx_enabled;         /* Flag for receiver state */
-        int tx_enabled;         /* Flag for transmitter state */
-
-        u16 irqen_reg;          /* Current IRQ enable register value */
-        /* Shared data */
-        u16 mode1_reg;          /* Current mode1 register value*/
-        int mode1_commit;       /* Flag for setting new mode1 register value */
-        u16 lcr_reg;            /* Current LCR register value */
-        int lcr_commit;         /* Flag for setting new LCR register value */
-        u32 brg_cfg;            /* Current Baud rate generator config  */
-        int brg_commit;         /* Flag for setting new baud rate generator
-                                 * config
-                                 */
-        struct baud_table *baud_tbl;
-        int handle_irq;         /* Indicates that IRQ should be handled */
-
-        /* Rx buffer and str*/
-        u16 *rxbuf;
-        u8  *rxstr;
-        /* Tx buffer*/
-        u16 *txbuf;
-
-        struct max3107_plat *pdata;     /* Platform data */
-};
-
-/* Platform data structure */
-struct max3107_plat {
-        /* Loopback mode enable */
-        int loopback;
-        /* External clock enable */
-        int ext_clk;
-        /* Called during the register initialisation */
-        void (*init)(struct max3107_port *s);
-        /* Called when the port is found and configured */
-        int (*configure)(struct max3107_port *s);
-        /* HW suspend function */
-        void (*hw_suspend) (struct max3107_port *s, int suspend);
-        /* Polling mode enable */
-        int polled_mode;
-        /* Polling period if polling mode enabled */
-        int poll_time;
-};
-
-extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len);
-extern void max3107_hw_susp(struct max3107_port *s, int suspend);
-extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata);
-extern int max3107_remove(struct spi_device *spi);
-extern int max3107_suspend(struct spi_device *spi, pm_message_t state);
-extern int max3107_resume(struct spi_device *spi);
-
-#endif /* _LINUX_SERIAL_MAX3107_H */
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
new file mode 100644
index 000000000000..2bc28a59d385
--- /dev/null
+++ b/drivers/tty/serial/max310x.c
@@ -0,0 +1,1260 @@
+/*
+ *  Maxim (Dallas) MAX3107/8 serial driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ *  Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
+ *  Based on max3110.c, by Feng Tang <feng.tang@intel.com>
+ *  Based on max3107.c, by Aavamobile
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+/* TODO: MAX3109 support (Dual) */
+/* TODO: MAX14830 support (Quad) */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/regmap.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_data/max310x.h>
+
+#define MAX310X_MAJOR                   204
+#define MAX310X_MINOR                   209
+
+/* MAX310X register definitions */
+#define MAX310X_RHR_REG                 (0x00) /* RX FIFO */
+#define MAX310X_THR_REG                 (0x00) /* TX FIFO */
+#define MAX310X_IRQEN_REG               (0x01) /* IRQ enable */
+#define MAX310X_IRQSTS_REG              (0x02) /* IRQ status */
+#define MAX310X_LSR_IRQEN_REG           (0x03) /* LSR IRQ enable */
+#define MAX310X_LSR_IRQSTS_REG          (0x04) /* LSR IRQ status */
+#define MAX310X_SPCHR_IRQEN_REG         (0x05) /* Special char IRQ enable */
+#define MAX310X_SPCHR_IRQSTS_REG        (0x06) /* Special char IRQ status */
+#define MAX310X_STS_IRQEN_REG           (0x07) /* Status IRQ enable */
+#define MAX310X_STS_IRQSTS_REG          (0x08) /* Status IRQ status */
+#define MAX310X_MODE1_REG               (0x09) /* MODE1 */
+#define MAX310X_MODE2_REG               (0x0a) /* MODE2 */
+#define MAX310X_LCR_REG                 (0x0b) /* LCR */
+#define MAX310X_RXTO_REG                (0x0c) /* RX timeout */
+#define MAX310X_HDPIXDELAY_REG          (0x0d) /* Auto transceiver delays */
+#define MAX310X_IRDA_REG                (0x0e) /* IRDA settings */
+#define MAX310X_FLOWLVL_REG             (0x0f) /* Flow control levels */
+#define MAX310X_FIFOTRIGLVL_REG         (0x10) /* FIFO IRQ trigger levels */
+#define MAX310X_TXFIFOLVL_REG           (0x11) /* TX FIFO level */
+#define MAX310X_RXFIFOLVL_REG           (0x12) /* RX FIFO level */
+#define MAX310X_FLOWCTRL_REG            (0x13) /* Flow control */
+#define MAX310X_XON1_REG                (0x14) /* XON1 character */
+#define MAX310X_XON2_REG                (0x15) /* XON2 character */
+#define MAX310X_XOFF1_REG               (0x16) /* XOFF1 character */
+#define MAX310X_XOFF2_REG               (0x17) /* XOFF2 character */
+#define MAX310X_GPIOCFG_REG             (0x18) /* GPIO config */
+#define MAX310X_GPIODATA_REG            (0x19) /* GPIO data */
+#define MAX310X_PLLCFG_REG              (0x1a) /* PLL config */
+#define MAX310X_BRGCFG_REG              (0x1b) /* Baud rate generator conf */
+#define MAX310X_BRGDIVLSB_REG           (0x1c) /* Baud rate divisor LSB */
+#define MAX310X_BRGDIVMSB_REG           (0x1d) /* Baud rate divisor MSB */
+#define MAX310X_CLKSRC_REG              (0x1e) /* Clock source */
+/* Only present in MAX3107 */
+#define MAX3107_REVID_REG               (0x1f) /* Revision identification */
+
+/* IRQ register bits */
+#define MAX310X_IRQ_LSR_BIT             (1 << 0) /* LSR interrupt */
+#define MAX310X_IRQ_SPCHR_BIT           (1 << 1) /* Special char interrupt */
+#define MAX310X_IRQ_STS_BIT             (1 << 2) /* Status interrupt */
+#define MAX310X_IRQ_RXFIFO_BIT          (1 << 3) /* RX FIFO interrupt */
+#define MAX310X_IRQ_TXFIFO_BIT          (1 << 4) /* TX FIFO interrupt */
+#define MAX310X_IRQ_TXEMPTY_BIT         (1 << 5) /* TX FIFO empty interrupt */
+#define MAX310X_IRQ_RXEMPTY_BIT         (1 << 6) /* RX FIFO empty interrupt */
+#define MAX310X_IRQ_CTS_BIT             (1 << 7) /* CTS interrupt */
+
+/* LSR register bits */
+#define MAX310X_LSR_RXTO_BIT            (1 << 0) /* RX timeout */
+#define MAX310X_LSR_RXOVR_BIT           (1 << 1) /* RX overrun */
+#define MAX310X_LSR_RXPAR_BIT           (1 << 2) /* RX parity error */
+#define MAX310X_LSR_FRERR_BIT           (1 << 3) /* Frame error */
+#define MAX310X_LSR_RXBRK_BIT           (1 << 4) /* RX break */
+#define MAX310X_LSR_RXNOISE_BIT         (1 << 5) /* RX noise */
+#define MAX310X_LSR_CTS_BIT             (1 << 7) /* CTS pin state */
+
+/* Special character register bits */
+#define MAX310X_SPCHR_XON1_BIT          (1 << 0) /* XON1 character */
+#define MAX310X_SPCHR_XON2_BIT          (1 << 1) /* XON2 character */
+#define MAX310X_SPCHR_XOFF1_BIT         (1 << 2) /* XOFF1 character */
+#define MAX310X_SPCHR_XOFF2_BIT         (1 << 3) /* XOFF2 character */
+#define MAX310X_SPCHR_BREAK_BIT         (1 << 4) /* RX break */
+#define MAX310X_SPCHR_MULTIDROP_BIT     (1 << 5) /* 9-bit multidrop addr char */
+
+/* Status register bits */
+#define MAX310X_STS_GPIO0_BIT           (1 << 0) /* GPIO 0 interrupt */
+#define MAX310X_STS_GPIO1_BIT           (1 << 1) /* GPIO 1 interrupt */
+#define MAX310X_STS_GPIO2_BIT           (1 << 2) /* GPIO 2 interrupt */
+#define MAX310X_STS_GPIO3_BIT           (1 << 3) /* GPIO 3 interrupt */
+#define MAX310X_STS_CLKREADY_BIT        (1 << 5) /* Clock ready */
+#define MAX310X_STS_SLEEP_BIT           (1 << 6) /* Sleep interrupt */
+
+/* MODE1 register bits */
+#define MAX310X_MODE1_RXDIS_BIT         (1 << 0) /* RX disable */
+#define MAX310X_MODE1_TXDIS_BIT         (1 << 1) /* TX disable */
+#define MAX310X_MODE1_TXHIZ_BIT         (1 << 2) /* TX pin three-state */
+#define MAX310X_MODE1_RTSHIZ_BIT        (1 << 3) /* RTS pin three-state */
+#define MAX310X_MODE1_TRNSCVCTRL_BIT    (1 << 4) /* Transceiver ctrl enable */
+#define MAX310X_MODE1_FORCESLEEP_BIT    (1 << 5) /* Force sleep mode */
+#define MAX310X_MODE1_AUTOSLEEP_BIT     (1 << 6) /* Auto sleep enable */
+#define MAX310X_MODE1_IRQSEL_BIT        (1 << 7) /* IRQ pin enable */
+
+/* MODE2 register bits */
+#define MAX310X_MODE2_RST_BIT           (1 << 0) /* Chip reset */
+#define MAX310X_MODE2_FIFORST_BIT       (1 << 1) /* FIFO reset */
+#define MAX310X_MODE2_RXTRIGINV_BIT     (1 << 2) /* RX FIFO INT invert */
+#define MAX310X_MODE2_RXEMPTINV_BIT     (1 << 3) /* RX FIFO empty INT invert */
+#define MAX310X_MODE2_SPCHR_BIT         (1 << 4) /* Special chr detect enable */
+#define MAX310X_MODE2_LOOPBACK_BIT      (1 << 5) /* Internal loopback enable */
+#define MAX310X_MODE2_MULTIDROP_BIT     (1 << 6) /* 9-bit multidrop enable */
+#define MAX310X_MODE2_ECHOSUPR_BIT      (1 << 7) /* ECHO suppression enable */
+
+/* LCR register bits */
+#define MAX310X_LCR_LENGTH0_BIT         (1 << 0) /* Word length bit 0 */
+#define MAX310X_LCR_LENGTH1_BIT         (1 << 1) /* Word length bit 1
+                                                  *
+                                                  * Word length bits table:
+                                                  * 00 -> 5 bit words
+                                                  * 01 -> 6 bit words
+                                                  * 10 -> 7 bit words
+                                                  * 11 -> 8 bit words
+                                                  */
+#define MAX310X_LCR_STOPLEN_BIT         (1 << 2) /* STOP length bit
+                                                  *
+                                                  * STOP length bit table:
+                                                  * 0 -> 1 stop bit
+                                                  * 1 -> 1-1.5 stop bits if
+                                                  *      word length is 5,
+                                                  *      2 stop bits otherwise
+                                                  */
+#define MAX310X_LCR_PARITY_BIT          (1 << 3) /* Parity bit enable */
+#define MAX310X_LCR_EVENPARITY_BIT      (1 << 4) /* Even parity bit enable */
+#define MAX310X_LCR_FORCEPARITY_BIT     (1 << 5) /* 9-bit multidrop parity */
+#define MAX310X_LCR_TXBREAK_BIT         (1 << 6) /* TX break enable */
+#define MAX310X_LCR_RTS_BIT             (1 << 7) /* RTS pin control */
+#define MAX310X_LCR_WORD_LEN_5          (0x00)
+#define MAX310X_LCR_WORD_LEN_6          (0x01)
+#define MAX310X_LCR_WORD_LEN_7          (0x02)
+#define MAX310X_LCR_WORD_LEN_8          (0x03)
+
+/* IRDA register bits */
+#define MAX310X_IRDA_IRDAEN_BIT         (1 << 0) /* IRDA mode enable */
+#define MAX310X_IRDA_SIR_BIT            (1 << 1) /* SIR mode enable */
+#define MAX310X_IRDA_SHORTIR_BIT        (1 << 2) /* Short SIR mode enable */
+#define MAX310X_IRDA_MIR_BIT            (1 << 3) /* MIR mode enable */
+#define MAX310X_IRDA_RXINV_BIT          (1 << 4) /* RX logic inversion enable */
+#define MAX310X_IRDA_TXINV_BIT          (1 << 5) /* TX logic inversion enable */
+
+/* Flow control trigger level register masks */
+#define MAX310X_FLOWLVL_HALT_MASK       (0x000f) /* Flow control halt level */
+#define MAX310X_FLOWLVL_RES_MASK        (0x00f0) /* Flow control resume level */
+#define MAX310X_FLOWLVL_HALT(words)     ((words / 8) & 0x0f)
+#define MAX310X_FLOWLVL_RES(words)      (((words / 8) & 0x0f) << 4)
+
+/* FIFO interrupt trigger level register masks */
+#define MAX310X_FIFOTRIGLVL_TX_MASK     (0x0f) /* TX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_RX_MASK     (0xf0) /* RX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_TX(words)   ((words / 8) & 0x0f)
+#define MAX310X_FIFOTRIGLVL_RX(words)   (((words / 8) & 0x0f) << 4)
+
+/* Flow control register bits */
+#define MAX310X_FLOWCTRL_AUTORTS_BIT    (1 << 0) /* Auto RTS flow ctrl enable */
+#define MAX310X_FLOWCTRL_AUTOCTS_BIT    (1 << 1) /* Auto CTS flow ctrl enable */
+#define MAX310X_FLOWCTRL_GPIADDR_BIT    (1 << 2) /* Enables that GPIO inputs
+                                                  * are used in conjunction with
+                                                  * XOFF2 for definition of
+                                                  * special character */
+#define MAX310X_FLOWCTRL_SWFLOWEN_BIT   (1 << 3) /* Auto SW flow ctrl enable */
+#define MAX310X_FLOWCTRL_SWFLOW0_BIT    (1 << 4) /* SWFLOW bit 0 */
+#define MAX310X_FLOWCTRL_SWFLOW1_BIT    (1 << 5) /* SWFLOW bit 1
+                                                  *
+                                                  * SWFLOW bits 1 & 0 table:
+                                                  * 00 -> no transmitter flow
+                                                  *       control
+                                                  * 01 -> receiver compares
+                                                  *       XON2 and XOFF2
+                                                  *       and controls
+                                                  *       transmitter
+                                                  * 10 -> receiver compares
+                                                  *       XON1 and XOFF1
+                                                  *       and controls
+                                                  *       transmitter
+                                                  * 11 -> receiver compares
+                                                  *       XON1, XON2, XOFF1 and
+                                                  *       XOFF2 and controls
+                                                  *       transmitter
+                                                  */
+#define MAX310X_FLOWCTRL_SWFLOW2_BIT    (1 << 6) /* SWFLOW bit 2 */
+#define MAX310X_FLOWCTRL_SWFLOW3_BIT    (1 << 7) /* SWFLOW bit 3
+                                                  *
+                                                  * SWFLOW bits 3 & 2 table:
+                                                  * 00 -> no received flow
+                                                  *       control
+                                                  * 01 -> transmitter generates
+                                                  *       XON2 and XOFF2
+                                                  * 10 -> transmitter generates
+                                                  *       XON1 and XOFF1
+                                                  * 11 -> transmitter generates
+                                                  *       XON1, XON2, XOFF1 and
+                                                  *       XOFF2
+                                                  */
+
+/* GPIO configuration register bits */
+#define MAX310X_GPIOCFG_GP0OUT_BIT      (1 << 0) /* GPIO 0 output enable */
+#define MAX310X_GPIOCFG_GP1OUT_BIT      (1 << 1) /* GPIO 1 output enable */
+#define MAX310X_GPIOCFG_GP2OUT_BIT      (1 << 2) /* GPIO 2 output enable */
+#define MAX310X_GPIOCFG_GP3OUT_BIT      (1 << 3) /* GPIO 3 output enable */
+#define MAX310X_GPIOCFG_GP0OD_BIT       (1 << 4) /* GPIO 0 open-drain enable */
+#define MAX310X_GPIOCFG_GP1OD_BIT       (1 << 5) /* GPIO 1 open-drain enable */
+#define MAX310X_GPIOCFG_GP2OD_BIT       (1 << 6) /* GPIO 2 open-drain enable */
+#define MAX310X_GPIOCFG_GP3OD_BIT       (1 << 7) /* GPIO 3 open-drain enable */
+
+/* GPIO DATA register bits */
+#define MAX310X_GPIODATA_GP0OUT_BIT     (1 << 0) /* GPIO 0 output value */
+#define MAX310X_GPIODATA_GP1OUT_BIT     (1 << 1) /* GPIO 1 output value */
+#define MAX310X_GPIODATA_GP2OUT_BIT     (1 << 2) /* GPIO 2 output value */
+#define MAX310X_GPIODATA_GP3OUT_BIT     (1 << 3) /* GPIO 3 output value */
+#define MAX310X_GPIODATA_GP0IN_BIT      (1 << 4) /* GPIO 0 input value */
+#define MAX310X_GPIODATA_GP1IN_BIT      (1 << 5) /* GPIO 1 input value */
+#define MAX310X_GPIODATA_GP2IN_BIT      (1 << 6) /* GPIO 2 input value */
+#define MAX310X_GPIODATA_GP3IN_BIT      (1 << 7) /* GPIO 3 input value */
+
+/* PLL configuration register masks */
+#define MAX310X_PLLCFG_PREDIV_MASK      (0x3f) /* PLL predivision value */
+#define MAX310X_PLLCFG_PLLFACTOR_MASK   (0xc0) /* PLL multiplication factor */
+
+/* Baud rate generator configuration register bits */
+#define MAX310X_BRGCFG_2XMODE_BIT       (1 << 4) /* Double baud rate */
+#define MAX310X_BRGCFG_4XMODE_BIT       (1 << 5) /* Quadruple baud rate */
+
+/* Clock source register bits */
+#define MAX310X_CLKSRC_CRYST_BIT        (1 << 1) /* Crystal osc enable */
+#define MAX310X_CLKSRC_PLL_BIT          (1 << 2) /* PLL enable */
+#define MAX310X_CLKSRC_PLLBYP_BIT       (1 << 3) /* PLL bypass */
+#define MAX310X_CLKSRC_EXTCLK_BIT       (1 << 4) /* External clock enable */
+#define MAX310X_CLKSRC_CLK2RTS_BIT      (1 << 7) /* Baud clk to RTS pin */
+
+/* Misc definitions */
+#define MAX310X_FIFO_SIZE               (128)
+
+/* MAX3107 specific */
+#define MAX3107_REV_ID                  (0xa0)
+#define MAX3107_REV_MASK                (0xfe)
+
+/* IRQ status bits definitions */
+#define MAX310X_IRQ_TX                  (MAX310X_IRQ_TXFIFO_BIT | \
+                                         MAX310X_IRQ_TXEMPTY_BIT)
+#define MAX310X_IRQ_RX                  (MAX310X_IRQ_RXFIFO_BIT | \
+                                         MAX310X_IRQ_RXEMPTY_BIT)
+
+/* Supported chip types */
+enum {
+        MAX310X_TYPE_MAX3107    = 3107,
+        MAX310X_TYPE_MAX3108    = 3108,
+};
+
+struct max310x_port {
+        struct uart_driver      uart;
+        struct uart_port        port;
+
+        const char              *name;
+        int                     uartclk;
+
+        unsigned int            nr_gpio;
+#ifdef CONFIG_GPIOLIB
+        struct gpio_chip        gpio;
+#endif
+
+        struct regmap           *regmap;
+        struct regmap_config    regcfg;
+
+        struct workqueue_struct *wq;
+        struct work_struct      tx_work;
+
+        struct mutex            max310x_mutex;
+
+        struct max310x_pdata    *pdata;
+};
+
+static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg)
+{
+        switch (reg) {
+        case MAX310X_IRQSTS_REG:
+        case MAX310X_LSR_IRQSTS_REG:
+        case MAX310X_SPCHR_IRQSTS_REG:
+        case MAX310X_STS_IRQSTS_REG:
+        case MAX310X_TXFIFOLVL_REG:
+        case MAX310X_RXFIFOLVL_REG:
+        case MAX3107_REVID_REG: /* Only available on MAX3107 */
+                return false;
+        default:
+                break;
+        }
+
+        return true;
+}
+
+static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
+{
+        switch (reg) {
+        case MAX310X_RHR_REG:
+        case MAX310X_IRQSTS_REG:
+        case MAX310X_LSR_IRQSTS_REG:
+        case MAX310X_SPCHR_IRQSTS_REG:
+        case MAX310X_STS_IRQSTS_REG:
+        case MAX310X_TXFIFOLVL_REG:
+        case MAX310X_RXFIFOLVL_REG:
+        case MAX310X_GPIODATA_REG:
+                return true;
+        default:
+                break;
+        }
+
+        return false;
+}
+
+static bool max310x_reg_precious(struct device *dev, unsigned int reg)
+{
+        switch (reg) {
+        case MAX310X_RHR_REG:
+        case MAX310X_IRQSTS_REG:
+        case MAX310X_SPCHR_IRQSTS_REG:
+        case MAX310X_STS_IRQSTS_REG:
+                return true;
+        default:
+                break;
+        }
+
+        return false;
+}
+
+static void max310x_set_baud(struct max310x_port *s, int baud)
+{
+        unsigned int mode = 0, div = s->uartclk / baud;
+
+        if (!(div / 16)) {
+                /* Mode x2 */
+                mode = MAX310X_BRGCFG_2XMODE_BIT;
+                div = (s->uartclk * 2) / baud;
+        }
+
+        if (!(div / 16)) {
+                /* Mode x4 */
+                mode = MAX310X_BRGCFG_4XMODE_BIT;
+                div = (s->uartclk * 4) / baud;
+        }
+
+        regmap_write(s->regmap, MAX310X_BRGDIVMSB_REG,
+                     ((div / 16) >> 8) & 0xff);
+        regmap_write(s->regmap, MAX310X_BRGDIVLSB_REG, (div / 16) & 0xff);
+        regmap_write(s->regmap, MAX310X_BRGCFG_REG, (div % 16) | mode);
+}
+
+static void max310x_wait_pll(struct max310x_port *s)
+{
+        int tryes = 1000;
+
+        /* Wait for PLL only if crystal is used */
+        if (!(s->pdata->driver_flags & MAX310X_EXT_CLK)) {
+                unsigned int sts = 0;
+
+                while (tryes--) {
+                        regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &sts);
+                        if (sts & MAX310X_STS_CLKREADY_BIT)
+                                break;
+                }
+        }
+}
+
+static int __devinit max310x_update_best_err(unsigned long f, long *besterr)
+{
+        /* Use baudrate 115200 for calculate error */
+        long err = f % (115200 * 16);
+
+        if ((*besterr < 0) || (*besterr > err)) {
+                *besterr = err;
+                return 0;
+        }
+
+        return 1;
+}
+
+static int __devinit max310x_set_ref_clk(struct max310x_port *s)
+{
+        unsigned int div, clksrc, pllcfg = 0;
+        long besterr = -1;
+        unsigned long fdiv, fmul, bestfreq = s->pdata->frequency;
+
+        /* First, update error without PLL */
+        max310x_update_best_err(s->pdata->frequency, &besterr);
+
+        /* Try all possible PLL dividers */
+        for (div = 1; (div <= 63) && besterr; div++) {
+                fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div);
+
+                /* Try multiplier 6 */
+                fmul = fdiv * 6;
+                if ((fdiv >= 500000) && (fdiv <= 800000))
+                        if (!max310x_update_best_err(fmul, &besterr)) {
+                                pllcfg = (0 << 6) | div;
+                                bestfreq = fmul;
+                        }
+                /* Try multiplier 48 */
+                fmul = fdiv * 48;
+                if ((fdiv >= 850000) && (fdiv <= 1200000))
+                        if (!max310x_update_best_err(fmul, &besterr)) {
+                                pllcfg = (1 << 6) | div;
+                                bestfreq = fmul;
+                        }
+                /* Try multiplier 96 */
+                fmul = fdiv * 96;
+                if ((fdiv >= 425000) && (fdiv <= 1000000))
+                        if (!max310x_update_best_err(fmul, &besterr)) {
+                                pllcfg = (2 << 6) | div;
+                                bestfreq = fmul;
+                        }
+                /* Try multiplier 144 */
+                fmul = fdiv * 144;
+                if ((fdiv >= 390000) && (fdiv <= 667000))
+                        if (!max310x_update_best_err(fmul, &besterr)) {
+                                pllcfg = (3 << 6) | div;
+                                bestfreq = fmul;
+                        }
+        }
+
+        /* Configure clock source */
+        if (s->pdata->driver_flags & MAX310X_EXT_CLK)
+                clksrc = MAX310X_CLKSRC_EXTCLK_BIT;
+        else
+                clksrc = MAX310X_CLKSRC_CRYST_BIT;
+
+        /* Configure PLL */
+        if (pllcfg) {
+                clksrc |= MAX310X_CLKSRC_PLL_BIT;
+                regmap_write(s->regmap, MAX310X_PLLCFG_REG, pllcfg);
+        } else
+                clksrc |= MAX310X_CLKSRC_PLLBYP_BIT;
+
+        regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc);
+
+        if (pllcfg)
+                max310x_wait_pll(s);
+
+        dev_dbg(s->port.dev, "Reference clock set to %lu Hz\n", bestfreq);
+
+        return (int)bestfreq;
+}
+
+static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen)
+{
+        unsigned int sts = 0, ch = 0, flag;
+        struct tty_struct *tty = tty_port_tty_get(&s->port.state->port);
+
+        if (!tty)
+                return;
+
+        if (unlikely(rxlen >= MAX310X_FIFO_SIZE)) {
+                dev_warn(s->port.dev, "Possible RX FIFO overrun %d\n", rxlen);
+                /* Ensure sanity of RX level */
+                rxlen = MAX310X_FIFO_SIZE;
+        }
+
+        dev_dbg(s->port.dev, "RX Len = %u\n", rxlen);
+
+        while (rxlen--) {
+                regmap_read(s->regmap, MAX310X_RHR_REG, &ch);
+                regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &sts);
+
+                sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT |
+                       MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT;
+
+                s->port.icount.rx++;
+                flag = TTY_NORMAL;
+
+                if (unlikely(sts)) {
+                        if (sts & MAX310X_LSR_RXBRK_BIT) {
+                                s->port.icount.brk++;
+                                if (uart_handle_break(&s->port))
+                                        continue;
+                        } else if (sts & MAX310X_LSR_RXPAR_BIT)
+                                s->port.icount.parity++;
+                        else if (sts & MAX310X_LSR_FRERR_BIT)
+                                s->port.icount.frame++;
+                        else if (sts & MAX310X_LSR_RXOVR_BIT)
+                                s->port.icount.overrun++;
+
+                        sts &= s->port.read_status_mask;
+                        if (sts & MAX310X_LSR_RXBRK_BIT)
+                                flag = TTY_BREAK;
+                        else if (sts & MAX310X_LSR_RXPAR_BIT)
+                                flag = TTY_PARITY;
+                        else if (sts & MAX310X_LSR_FRERR_BIT)
+                                flag = TTY_FRAME;
+                        else if (sts & MAX310X_LSR_RXOVR_BIT)
+                                flag = TTY_OVERRUN;
+                }
+
+                if (uart_handle_sysrq_char(s->port, ch))
+                        continue;
+
+                if (sts & s->port.ignore_status_mask)
+                        continue;
+
+                uart_insert_char(&s->port, sts, MAX310X_LSR_RXOVR_BIT,
+                                 ch, flag);
+        }
+
+        tty_flip_buffer_push(tty);
+
+        tty_kref_put(tty);
+}
+
+static void max310x_handle_tx(struct max310x_port *s)
+{
+        struct circ_buf *xmit = &s->port.state->xmit;
+        unsigned int txlen = 0, to_send;
+
+        if (unlikely(s->port.x_char)) {
+                regmap_write(s->regmap, MAX310X_THR_REG, s->port.x_char);
+                s->port.icount.tx++;
+                s->port.x_char = 0;
+                return;
+        }
+
+        if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
+                return;
+
+        /* Get length of data pending in circular buffer */
+        to_send = uart_circ_chars_pending(xmit);
+        if (likely(to_send)) {
+                /* Limit to size of TX FIFO */
+                regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &txlen);
+                txlen = MAX310X_FIFO_SIZE - txlen;
+                to_send = (to_send > txlen) ? txlen : to_send;
+
+                dev_dbg(s->port.dev, "TX Len = %u\n", to_send);
+
+                /* Add data to send */
+                s->port.icount.tx += to_send;
+                while (to_send--) {
+                        regmap_write(s->regmap, MAX310X_THR_REG,
+                                     xmit->buf[xmit->tail]);
+                        xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                };
+        }
+
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(&s->port);
+}
+
+static irqreturn_t max310x_ist(int irq, void *dev_id)
+{
+        struct max310x_port *s = (struct max310x_port *)dev_id;
+        unsigned int ists = 0, lsr = 0, rxlen = 0;
+
+        mutex_lock(&s->max310x_mutex);
+
+        for (;;) {
+                /* Read IRQ status & RX FIFO level */
+                regmap_read(s->regmap, MAX310X_IRQSTS_REG, &ists);
+                regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &lsr);
+                regmap_read(s->regmap, MAX310X_RXFIFOLVL_REG, &rxlen);
+                if (!ists && !(lsr & MAX310X_LSR_RXTO_BIT) && !rxlen)
+                        break;
+
+                dev_dbg(s->port.dev, "IRQ status: 0x%02x\n", ists);
+
+                if (rxlen)
+                        max310x_handle_rx(s, rxlen);
+                if (ists & MAX310X_IRQ_TX)
+                        max310x_handle_tx(s);
+                if (ists & MAX310X_IRQ_CTS_BIT)
+                        uart_handle_cts_change(&s->port,
+                                               !!(lsr & MAX310X_LSR_CTS_BIT));
+        }
+
+        mutex_unlock(&s->max310x_mutex);
+
+        return IRQ_HANDLED;
+}
+
+static void max310x_wq_proc(struct work_struct *ws)
+{
+        struct max310x_port *s = container_of(ws, struct max310x_port, tx_work);
+
+        mutex_lock(&s->max310x_mutex);
+        max310x_handle_tx(s);
+        mutex_unlock(&s->max310x_mutex);
+}
+
+static void max310x_start_tx(struct uart_port *port)
+{
+        struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+        queue_work(s->wq, &s->tx_work);
+}
+
+static void max310x_stop_tx(struct uart_port *port)
+{
+        /* Do nothing */
+}
+
+static void max310x_stop_rx(struct uart_port *port)
+{
+        /* Do nothing */
+}
+
+static unsigned int max310x_tx_empty(struct uart_port *port)
+{
+        unsigned int val = 0;
+        struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+        mutex_lock(&s->max310x_mutex);
+        regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &val);
+        mutex_unlock(&s->max310x_mutex);
+
+        return val ? 0 : TIOCSER_TEMT;
+}
+
+static void max310x_enable_ms(struct uart_port *port)
+{
+        /* Modem status not supported */
+}
+
+static unsigned int max310x_get_mctrl(struct uart_port *port)
+{
+        /* DCD and DSR are not wired and CTS/RTS is handled automatically
+         * so just indicate DSR and CAR asserted
+         */
+        return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+        /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
+         * so do nothing
+         */
+}
+
+static void max310x_break_ctl(struct uart_port *port, int break_state)
+{
+        struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+        mutex_lock(&s->max310x_mutex);
+        regmap_update_bits(s->regmap, MAX310X_LCR_REG,
+                           MAX310X_LCR_TXBREAK_BIT,
+                           break_state ? MAX310X_LCR_TXBREAK_BIT : 0);
+        mutex_unlock(&s->max310x_mutex);
+}
+
+static void max310x_set_termios(struct uart_port *port,
+                                struct ktermios *termios,
+                                struct ktermios *old)
+{
+        struct max310x_port *s = container_of(port, struct max310x_port, port);
+        unsigned int lcr, flow = 0;
+        int baud;
+
+        mutex_lock(&s->max310x_mutex);
+
+        /* Mask termios capabilities we don't support */
+        termios->c_cflag &= ~CMSPAR;
+        termios->c_iflag &= ~IXANY;
+
+        /* Word size */
+        switch (termios->c_cflag & CSIZE) {
+        case CS5:
+                lcr = MAX310X_LCR_WORD_LEN_5;
+                break;
+        case CS6:
+                lcr = MAX310X_LCR_WORD_LEN_6;
+                break;
+        case CS7:
+                lcr = MAX310X_LCR_WORD_LEN_7;
+                break;
+        case CS8:
+        default:
+                lcr = MAX310X_LCR_WORD_LEN_8;
+                break;
+        }
+
+        /* Parity */
+        if (termios->c_cflag & PARENB) {
+                lcr |= MAX310X_LCR_PARITY_BIT;
+                if (!(termios->c_cflag & PARODD))
+                        lcr |= MAX310X_LCR_EVENPARITY_BIT;
+        }
+
+        /* Stop bits */
+        if (termios->c_cflag & CSTOPB)
+                lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */
+
+        /* Update LCR register */
+        regmap_write(s->regmap, MAX310X_LCR_REG, lcr);
+
+        /* Set read status mask */
+        port->read_status_mask = MAX310X_LSR_RXOVR_BIT;
+        if (termios->c_iflag & INPCK)
+                port->read_status_mask |= MAX310X_LSR_RXPAR_BIT |
+                                          MAX310X_LSR_FRERR_BIT;
+        if (termios->c_iflag & (BRKINT | PARMRK))
+                port->read_status_mask |= MAX310X_LSR_RXBRK_BIT;
+
+        /* Set status ignore mask */
+        port->ignore_status_mask = 0;
+        if (termios->c_iflag & IGNBRK)
+                port->ignore_status_mask |= MAX310X_LSR_RXBRK_BIT;
+        if (!(termios->c_cflag & CREAD))
+                port->ignore_status_mask |= MAX310X_LSR_RXPAR_BIT |
+                                            MAX310X_LSR_RXOVR_BIT |
+                                            MAX310X_LSR_FRERR_BIT |
+                                            MAX310X_LSR_RXBRK_BIT;
+
+        /* Configure flow control */
+        regmap_write(s->regmap, MAX310X_XON1_REG, termios->c_cc[VSTART]);
+        regmap_write(s->regmap, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]);
+        if (termios->c_cflag & CRTSCTS)
+                flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT |
+                        MAX310X_FLOWCTRL_AUTORTS_BIT;
+        if (termios->c_iflag & IXON)
+                flow |= MAX310X_FLOWCTRL_SWFLOW3_BIT |
+                        MAX310X_FLOWCTRL_SWFLOWEN_BIT;
+        if (termios->c_iflag & IXOFF)
+                flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT |
+                        MAX310X_FLOWCTRL_SWFLOWEN_BIT;
+        regmap_write(s->regmap, MAX310X_FLOWCTRL_REG, flow);
+
+        /* Get baud rate generator configuration */
+        baud = uart_get_baud_rate(port, termios, old,
+                                  port->uartclk / 16 / 0xffff,
+                                  port->uartclk / 4);
+
+        /* Setup baudrate generator */
+        max310x_set_baud(s, baud);
+
+        /* Update timeout according to new baud rate */
+        uart_update_timeout(port, termios->c_cflag, baud);
+
+        mutex_unlock(&s->max310x_mutex);
+}
+
+static int max310x_startup(struct uart_port *port)
+{
+        unsigned int val, line = port->line;
+        struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+        if (s->pdata->suspend)
+                s->pdata->suspend(0);
+
+        mutex_lock(&s->max310x_mutex);
+
+        /* Configure baud rate, 9600 as default */
+        max310x_set_baud(s, 9600);
+
+        /* Configure LCR register, 8N1 mode by default */
+        val = MAX310X_LCR_WORD_LEN_8;
+        regmap_write(s->regmap, MAX310X_LCR_REG, val);
+
+        /* Configure MODE1 register */
+        regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+                           MAX310X_MODE1_TRNSCVCTRL_BIT,
+                           (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL)
+                           ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0);
+
+        /* Configure MODE2 register */
+        val = MAX310X_MODE2_RXEMPTINV_BIT;
+        if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK)
+                val |= MAX310X_MODE2_LOOPBACK_BIT;
+        if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS)
+                val |= MAX310X_MODE2_ECHOSUPR_BIT;
+
+        /* Reset FIFOs */
+        val |= MAX310X_MODE2_FIFORST_BIT;
+        regmap_write(s->regmap, MAX310X_MODE2_REG, val);
+
+        /* Configure FIFO trigger level register */
+        /* RX FIFO trigger for 16 words, TX FIFO trigger for 64 words */
+        val = MAX310X_FIFOTRIGLVL_RX(16) | MAX310X_FIFOTRIGLVL_TX(64);
+        regmap_write(s->regmap, MAX310X_FIFOTRIGLVL_REG, val);
+
+        /* Configure flow control levels */
+        /* Flow control halt level 96, resume level 48 */
+        val = MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96);
+        regmap_write(s->regmap, MAX310X_FLOWLVL_REG, val);
+
+        /* Clear timeout register */
+        regmap_write(s->regmap, MAX310X_RXTO_REG, 0);
+
+        /* Configure LSR interrupt enable register */
+        /* Enable RX timeout interrupt */
+        val = MAX310X_LSR_RXTO_BIT;
+        regmap_write(s->regmap, MAX310X_LSR_IRQEN_REG, val);
+
+        /* Clear FIFO reset */
+        regmap_update_bits(s->regmap, MAX310X_MODE2_REG,
+                           MAX310X_MODE2_FIFORST_BIT, 0);
+
+        /* Clear IRQ status register by reading it */
+        regmap_read(s->regmap, MAX310X_IRQSTS_REG, &val);
+
+        /* Configure interrupt enable register */
+        /* Enable CTS change interrupt */
+        val = MAX310X_IRQ_CTS_BIT;
+        /* Enable RX, TX interrupts */
+        val |= MAX310X_IRQ_RX | MAX310X_IRQ_TX;
+        regmap_write(s->regmap, MAX310X_IRQEN_REG, val);
+
+        mutex_unlock(&s->max310x_mutex);
+
+        return 0;
+}
+
+static void max310x_shutdown(struct uart_port *port)
+{
+        struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+        /* Disable all interrupts */
+        mutex_lock(&s->max310x_mutex);
+        regmap_write(s->regmap, MAX310X_IRQEN_REG, 0);
+        mutex_unlock(&s->max310x_mutex);
+
+        if (s->pdata->suspend)
+                s->pdata->suspend(1);
+}
+
+static const char *max310x_type(struct uart_port *port)
+{
+        struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+        return (port->type == PORT_MAX310X) ? s->name : NULL;
+}
+
+static int max310x_request_port(struct uart_port *port)
+{
+        /* Do nothing */
+        return 0;
+}
+
+static void max310x_release_port(struct uart_port *port)
+{
+        /* Do nothing */
+}
+
+static void max310x_config_port(struct uart_port *port, int flags)
+{
+        if (flags & UART_CONFIG_TYPE)
+                port->type = PORT_MAX310X;
+}
+
+static int max310x_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+        if ((ser->type == PORT_UNKNOWN) || (ser->type == PORT_MAX310X))
+                return 0;
+        if (ser->irq == port->irq)
+                return 0;
+
+        return -EINVAL;
+}
+
+static struct uart_ops max310x_ops = {
+        .tx_empty       = max310x_tx_empty,
+        .set_mctrl      = max310x_set_mctrl,
+        .get_mctrl      = max310x_get_mctrl,
+        .stop_tx        = max310x_stop_tx,
+        .start_tx       = max310x_start_tx,
+        .stop_rx        = max310x_stop_rx,
+        .enable_ms      = max310x_enable_ms,
+        .break_ctl      = max310x_break_ctl,
+        .startup        = max310x_startup,
+        .shutdown       = max310x_shutdown,
+        .set_termios    = max310x_set_termios,
+        .type           = max310x_type,
+        .request_port   = max310x_request_port,
+        .release_port   = max310x_release_port,
+        .config_port    = max310x_config_port,
+        .verify_port    = max310x_verify_port,
+};
+
+static int max310x_suspend(struct spi_device *spi, pm_message_t state)
+{
+        int ret;
+        struct max310x_port *s = dev_get_drvdata(&spi->dev);
+
+        dev_dbg(&spi->dev, "Suspend\n");
+
+        ret = uart_suspend_port(&s->uart, &s->port);
+
+        mutex_lock(&s->max310x_mutex);
+
+        /* Enable sleep mode */
+        regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+                           MAX310X_MODE1_FORCESLEEP_BIT,
+                           MAX310X_MODE1_FORCESLEEP_BIT);
+
+        mutex_unlock(&s->max310x_mutex);
+
+        if (s->pdata->suspend)
+                s->pdata->suspend(1);
+
+        return ret;
+}
+
+static int max310x_resume(struct spi_device *spi)
+{
+        struct max310x_port *s = dev_get_drvdata(&spi->dev);
+
+        dev_dbg(&spi->dev, "Resume\n");
+
+        if (s->pdata->suspend)
+                s->pdata->suspend(0);
+
+        mutex_lock(&s->max310x_mutex);
+
+        /* Disable sleep mode */
+        regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+                           MAX310X_MODE1_FORCESLEEP_BIT,
+                           0);
+
+        max310x_wait_pll(s);
+
+        mutex_unlock(&s->max310x_mutex);
+
+        return uart_resume_port(&s->uart, &s->port);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+        unsigned int val = 0;
+        struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+        mutex_lock(&s->max310x_mutex);
+        regmap_read(s->regmap, MAX310X_GPIODATA_REG, &val);
+        mutex_unlock(&s->max310x_mutex);
+
+        return !!((val >> 4) & (1 << offset));
+}
+
+static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+        struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+        mutex_lock(&s->max310x_mutex);
+        regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ?
+                                                            1 << offset : 0);
+        mutex_unlock(&s->max310x_mutex);
+}
+
+static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+        struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+        mutex_lock(&s->max310x_mutex);
+
+        regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, 0);
+
+        mutex_unlock(&s->max310x_mutex);
+
+        return 0;
+}
+
+static int max310x_gpio_direction_output(struct gpio_chip *chip,
+                                         unsigned offset, int value)
+{
+        struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+        mutex_lock(&s->max310x_mutex);
+
+        regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset,
+                                                           1 << offset);
+        regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ?
+                                                            1 << offset : 0);
+
+        mutex_unlock(&s->max310x_mutex);
+
+        return 0;
+}
+#endif
+
+/* Generic platform data */
+static struct max310x_pdata generic_plat_data = {
+        .driver_flags   = MAX310X_EXT_CLK,
+        .uart_flags[0]  = MAX310X_ECHO_SUPRESS,
+        .frequency      = 26000000,
+};
+
+static int __devinit max310x_probe(struct spi_device *spi)
+{
+        struct max310x_port *s;
+        struct device *dev = &spi->dev;
+        int chiptype = spi_get_device_id(spi)->driver_data;
+        struct max310x_pdata *pdata = dev->platform_data;
+        unsigned int val = 0;
+        int ret;
+
+        /* Check for IRQ */
+        if (spi->irq <= 0) {
+                dev_err(dev, "No IRQ specified\n");
+                return -ENOTSUPP;
+        }
+
+        /* Alloc port structure */
+        s = devm_kzalloc(dev, sizeof(struct max310x_port), GFP_KERNEL);
+        if (!s) {
+                dev_err(dev, "Error allocating port structure\n");
+                return -ENOMEM;
+        }
+        dev_set_drvdata(dev, s);
+
+        if (!pdata) {
+                dev_warn(dev, "No platform data supplied, using defaults\n");
+                pdata = &generic_plat_data;
+        }
+        s->pdata = pdata;
+
+        /* Individual chip settings */
+        switch (chiptype) {
+        case MAX310X_TYPE_MAX3107:
+                s->name = "MAX3107";
+                s->nr_gpio = 4;
+                s->uart.nr = 1;
+                s->regcfg.max_register = 0x1f;
+                break;
+        case MAX310X_TYPE_MAX3108:
+                s->name = "MAX3108";
+                s->nr_gpio = 4;
+                s->uart.nr = 1;
+                s->regcfg.max_register = 0x1e;
+                break;
+        default:
+                dev_err(dev, "Unsupported chip type %i\n", chiptype);
+                return -ENOTSUPP;
+        }
+
+        /* Check input frequency */
+        if ((pdata->driver_flags & MAX310X_EXT_CLK) &&
+           ((pdata->frequency < 500000) || (pdata->frequency > 35000000)))
+                goto err_freq;
+        /* Check frequency for quartz */
+        if (!(pdata->driver_flags & MAX310X_EXT_CLK) &&
+           ((pdata->frequency < 1000000) || (pdata->frequency > 4000000)))
+                goto err_freq;
+
+        mutex_init(&s->max310x_mutex);
+
+        /* Setup SPI bus */
+        spi->mode               = SPI_MODE_0;
+        spi->bits_per_word      = 8;
+        spi->max_speed_hz       = 26000000;
+        spi_setup(spi);
+
+        /* Setup regmap */
+        s->regcfg.reg_bits              = 8;
+        s->regcfg.val_bits              = 8;
+        s->regcfg.read_flag_mask        = 0x00;
+        s->regcfg.write_flag_mask       = 0x80;
+        s->regcfg.cache_type            = REGCACHE_RBTREE;
+        s->regcfg.writeable_reg         = max3107_8_reg_writeable;
+        s->regcfg.volatile_reg          = max310x_reg_volatile;
+        s->regcfg.precious_reg          = max310x_reg_precious;
+        s->regmap = devm_regmap_init_spi(spi, &s->regcfg);
+        if (IS_ERR(s->regmap)) {
+                ret = PTR_ERR(s->regmap);
+                dev_err(dev, "Failed to initialize register map\n");
+                goto err_out;
+        }
+
+        /* Reset chip & check SPI function */
+        ret = regmap_write(s->regmap, MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT);
+        if (ret) {
+                dev_err(dev, "SPI transfer failed\n");
+                goto err_out;
+        }
+        /* Clear chip reset */
+        regmap_write(s->regmap, MAX310X_MODE2_REG, 0);
+
+        switch (chiptype) {
+        case MAX310X_TYPE_MAX3107:
+                /* Check REV ID to ensure we are talking to what we expect */
+                regmap_read(s->regmap, MAX3107_REVID_REG, &val);
+                if (((val & MAX3107_REV_MASK) != MAX3107_REV_ID)) {
+                        dev_err(dev, "%s ID 0x%02x does not match\n",
+                                s->name, val);
+                        ret = -ENODEV;
+                        goto err_out;
+                }
+                break;
+        case MAX310X_TYPE_MAX3108:
+                /* MAX3108 have not REV ID register, we just check default value
+                 * from clocksource register to make sure everything works.
+                 */
+                regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val);
+                if (val != (MAX310X_CLKSRC_EXTCLK_BIT |
+                            MAX310X_CLKSRC_PLLBYP_BIT)) {
+                        dev_err(dev, "%s not present\n", s->name);
+                        ret = -ENODEV;
+                        goto err_out;
+                }
+                break;
+        }
+
+        /* Board specific configure */
+        if (pdata->init)
+                pdata->init();
+        if (pdata->suspend)
+                pdata->suspend(0);
+
+        /* Calculate referecne clock */
+        s->uartclk = max310x_set_ref_clk(s);
+
+        /* Disable all interrupts */
+        regmap_write(s->regmap, MAX310X_IRQEN_REG, 0);
+
+        /* Setup MODE1 register */
+        val = MAX310X_MODE1_IRQSEL_BIT; /* Enable IRQ pin */
+        if (pdata->driver_flags & MAX310X_AUTOSLEEP)
+                val = MAX310X_MODE1_AUTOSLEEP_BIT;
+        regmap_write(s->regmap, MAX310X_MODE1_REG, val);
+
+        /* Setup interrupt */
+        ret = devm_request_threaded_irq(dev, spi->irq, NULL, max310x_ist,
+                                        IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+                                        dev_name(dev), s);
+        if (ret) {
+                dev_err(dev, "Unable to reguest IRQ %i\n", spi->irq);
+                goto err_out;
+        }
+
+        /* Register UART driver */
+        s->uart.owner           = THIS_MODULE;
+        s->uart.driver_name     = dev_name(dev);
+        s->uart.dev_name        = "ttyMAX";
+        s->uart.major           = MAX310X_MAJOR;
+        s->uart.minor           = MAX310X_MINOR;
+        ret = uart_register_driver(&s->uart);
+        if (ret) {
+                dev_err(dev, "Registering UART driver failed\n");
+                goto err_out;
+        }
+
+        /* Initialize workqueue for start TX */
+        s->wq = create_freezable_workqueue(dev_name(dev));
+        INIT_WORK(&s->tx_work, max310x_wq_proc);
+
+        /* Initialize UART port data */
+        s->port.line            = 0;
+        s->port.dev             = dev;
+        s->port.irq             = spi->irq;
+        s->port.type            = PORT_MAX310X;
+        s->port.fifosize        = MAX310X_FIFO_SIZE;
+        s->port.flags           = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+        s->port.iotype          = UPIO_PORT;
+        s->port.membase         = (void __iomem *)0xffffffff; /* Bogus value */
+        s->port.uartclk         = s->uartclk;
+        s->port.ops             = &max310x_ops;
+        uart_add_one_port(&s->uart, &s->port);
+
+#ifdef CONFIG_GPIOLIB
+        /* Setup GPIO cotroller */
+        if (pdata->gpio_base) {
+                s->gpio.owner           = THIS_MODULE;
+                s->gpio.dev             = dev;
+                s->gpio.label           = dev_name(dev);
+                s->gpio.direction_input = max310x_gpio_direction_input;
+                s->gpio.get             = max310x_gpio_get;
+                s->gpio.direction_output= max310x_gpio_direction_output;
+                s->gpio.set             = max310x_gpio_set;
+                s->gpio.base            = pdata->gpio_base;
+                s->gpio.ngpio           = s->nr_gpio;
+                if (gpiochip_add(&s->gpio)) {
+                        /* Indicate that we should not call gpiochip_remove */
+                        s->gpio.base = 0;
+                }
+        } else
+                dev_info(dev, "GPIO support not enabled\n");
+#endif
+
+        /* Go to suspend mode */
+        if (pdata->suspend)
+                pdata->suspend(1);
+
+        return 0;
+
+err_freq:
+        dev_err(dev, "Frequency parameter incorrect\n");
+        ret = -EINVAL;
+
+err_out:
+        dev_set_drvdata(dev, NULL);
+
+        return ret;
+}
+
+static int __devexit max310x_remove(struct spi_device *spi)
+{
+        struct device *dev = &spi->dev;
+        struct max310x_port *s = dev_get_drvdata(dev);
+        int ret = 0;
+
+        dev_dbg(dev, "Removing port\n");
+
+        devm_free_irq(dev, s->port.irq, s);
+
+        destroy_workqueue(s->wq);
+
+        uart_remove_one_port(&s->uart, &s->port);
+
+        uart_unregister_driver(&s->uart);
+
+#ifdef CONFIG_GPIOLIB
+        if (s->pdata->gpio_base) {
+                ret = gpiochip_remove(&s->gpio);
+                if (ret)
+                        dev_err(dev, "Failed to remove gpio chip: %d\n", ret);
+        }
+#endif
+
+        dev_set_drvdata(dev, NULL);
+
+        if (s->pdata->suspend)
+                s->pdata->suspend(1);
+        if (s->pdata->exit)
+                s->pdata->exit();
+
+        return ret;
+}
+
+static const struct spi_device_id max310x_id_table[] = {
+        { "max3107",    MAX310X_TYPE_MAX3107 },
+        { "max3108",    MAX310X_TYPE_MAX3108 },
+};
+MODULE_DEVICE_TABLE(spi, max310x_id_table);
+
+static struct spi_driver max310x_driver = {
+        .driver = {
+                .name   = "max310x",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = max310x_probe,
+        .remove         = __devexit_p(max310x_remove),
+        .suspend        = max310x_suspend,
+        .resume         = max310x_resume,
+        .id_table       = max310x_id_table,
+};
+module_spi_driver(max310x_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("MAX310X serial driver");
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index bedac0d4c9ce..f19d04ed8586 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -775,11 +775,15 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
         }
 
         if (new->c_cflag & PARENB) {
+                if (new->c_cflag & CMSPAR)
+                        mr1 |= MPC52xx_PSC_MODE_PARFORCE;
+
+                /* With CMSPAR, PARODD also means high parity (same as termios) */
                 mr1 |= (new->c_cflag & PARODD) ?
                         MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
-        } else
+        } else {
                 mr1 |= MPC52xx_PSC_MODE_PARNONE;
-
+        }
 
         mr2 = 0;
 
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 8131e2c28015..033e0bc9ebab 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -896,7 +896,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
                         return PTR_ERR(msm_port->clk);
 
         if (msm_port->is_uartdm)
-                clk_set_rate(msm_port->clk, 7372800);
+                clk_set_rate(msm_port->clk, 1843200);
 
         port->uartclk = clk_get_rate(msm_port->clk);
         printk(KERN_INFO "uartclk = %d\n", port->uartclk);
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
index b25e6ee71443..925d1fa153db 100644
--- a/drivers/tty/serial/msm_smd_tty.c
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -223,9 +223,11 @@ static int __init smd_tty_init(void)
                 return ret;
 
         for (i = 0; i < smd_tty_channels_len; i++) {
-                tty_port_init(&smd_tty[smd_tty_channels[i].id].port);
-                smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops;
-                tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0);
+                struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port;
+                tty_port_init(port);
+                port->ops = &smd_tty_port_ops;
+                tty_port_register_device(port, smd_tty_driver,
+                                smd_tty_channels[i].id, NULL);
         }
 
         return 0;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 3a667eed63d6..6db3baa39a97 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -262,7 +262,7 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
 
         ctrl &= ~AUART_CTRL2_RTSEN;
         if (mctrl & TIOCM_RTS) {
-                if (u->state->port.flags & ASYNC_CTS_FLOW)
+                if (tty_port_cts_enabled(&u->state->port))
                         ctrl |= AUART_CTRL2_RTSEN;
         }
 
@@ -457,11 +457,11 @@ static void mxs_auart_shutdown(struct uart_port *u)
 
         writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
 
-        writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
-
         writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
                         u->membase + AUART_INTR_CLR);
 
+        writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
+
         clk_disable_unprepare(s->clk);
 }
 
@@ -781,6 +781,7 @@ out_free_irq:
         auart_port[pdev->id] = NULL;
         free_irq(s->irq, s);
 out_free_clk:
+        put_device(s->dev);
         clk_put(s->clk);
 out_free:
         kfree(s);
@@ -796,6 +797,7 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
 
         auart_port[pdev->id] = NULL;
 
+        put_device(s->dev);
         clk_put(s->clk);
         free_irq(s->irq, s);
         kfree(s);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 34e71874a892..df443b908ca3 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -105,6 +105,10 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
         port->uartclk = clk;
         port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
                 | UPF_FIXED_PORT | UPF_FIXED_TYPE;
+
+        if (of_find_property(np, "no-loopback-test", NULL))
+                port->flags |= UPF_SKIP_TEST;
+
         port->dev = &ofdev->dev;
 
         if (type == PORT_TEGRA)
@@ -144,8 +148,15 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
         switch (port_type) {
 #ifdef CONFIG_SERIAL_8250
         case PORT_8250 ... PORT_MAX_8250:
-                ret = serial8250_register_port(&port);
+        {
+                /* For now the of bindings don't support the extra
+                   8250 specific bits */
+                struct uart_8250_port port8250;
+                memset(&port8250, 0, sizeof(port8250));
+                port8250.port = port;
+                ret = serial8250_register_8250_port(&port8250);
                 break;
+        }
 #endif
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
         case PORT_NWPSERIAL:
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d3cda0cb2df0..f175385bb304 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -32,16 +32,16 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
+#include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
 
-#include <plat/dma.h>
-#include <plat/dmtimer.h>
 #include <plat/omap-serial.h>
 
 #define UART_BUILD_REVISION(x, y)       (((x) << 8) | (y))
@@ -57,8 +57,8 @@
 #define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK               (1 << 7)
 
 /* FCR register bitmasks */
-#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT                6
 #define OMAP_UART_FCR_RX_FIFO_TRIG_MASK                 (0x3 << 6)
+#define OMAP_UART_FCR_TX_FIFO_TRIG_MASK                 (0x3 << 4)
 
 /* MVR register bitmasks */
 #define OMAP_UART_MVR_SCHEME_SHIFT      30
@@ -71,12 +71,52 @@
 #define OMAP_UART_MVR_MAJ_SHIFT         8
 #define OMAP_UART_MVR_MIN_MASK          0x3f
 
+struct uart_omap_port {
+        struct uart_port        port;
+        struct uart_omap_dma    uart_dma;
+        struct device           *dev;
+
+        unsigned char           ier;
+        unsigned char           lcr;
+        unsigned char           mcr;
+        unsigned char           fcr;
+        unsigned char           efr;
+        unsigned char           dll;
+        unsigned char           dlh;
+        unsigned char           mdr1;
+        unsigned char           scr;
+
+        int                     use_dma;
+        /*
+         * Some bits in registers are cleared on a read, so they must
+         * be saved whenever the register is read but the bits will not
+         * be immediately processed.
+         */
+        unsigned int            lsr_break_flag;
+        unsigned char           msr_saved_flags;
+        char                    name[20];
+        unsigned long           port_activity;
+        u32                     context_loss_cnt;
+        u32                     errata;
+        u8                      wakeups_enabled;
+        unsigned int            irq_pending:1;
+
+        int                     DTR_gpio;
+        int                     DTR_inverted;
+        int                     DTR_active;
+
+        struct pm_qos_request   pm_qos_request;
+        u32                     latency;
+        u32                     calc_latency;
+        struct work_struct      qos_work;
+        struct pinctrl          *pins;
+};
+
+#define to_uart_omap_port(p)    ((container_of((p), struct uart_omap_port, port)))
+
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 
 /* Forward declaration of functions */
-static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
-static void serial_omap_rxdma_poll(unsigned long uart_no);
-static int serial_omap_start_rxdma(struct uart_omap_port *up);
 static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
 
 static struct workqueue_struct *serial_omap_uart_wq;
@@ -101,6 +141,46 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
         serial_out(up, UART_FCR, 0);
 }
 
+static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
+{
+        struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+        if (!pdata || !pdata->get_context_loss_count)
+                return 0;
+
+        return pdata->get_context_loss_count(up->dev);
+}
+
+static void serial_omap_set_forceidle(struct uart_omap_port *up)
+{
+        struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+        if (!pdata || !pdata->set_forceidle)
+                return;
+
+        pdata->set_forceidle(up->dev);
+}
+
+static void serial_omap_set_noidle(struct uart_omap_port *up)
+{
+        struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+        if (!pdata || !pdata->set_noidle)
+                return;
+
+        pdata->set_noidle(up->dev);
+}
+
+static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
+{
+        struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+        if (!pdata || !pdata->enable_wakeup)
+                return;
+
+        pdata->enable_wakeup(up->dev, enable);
+}
+
 /*
  * serial_omap_get_divisor - calculate divisor value
  * @port: uart port info
@@ -126,151 +206,55 @@ serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
         return port->uartclk/(baud * divisor);
 }
 
-static void serial_omap_stop_rxdma(struct uart_omap_port *up)
-{
-        if (up->uart_dma.rx_dma_used) {
-                del_timer(&up->uart_dma.rx_timer);
-                omap_stop_dma(up->uart_dma.rx_dma_channel);
-                omap_free_dma(up->uart_dma.rx_dma_channel);
-                up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
-                up->uart_dma.rx_dma_used = false;
-                pm_runtime_mark_last_busy(&up->pdev->dev);
-                pm_runtime_put_autosuspend(&up->pdev->dev);
-        }
-}
-
 static void serial_omap_enable_ms(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
         dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         up->ier |= UART_IER_MSI;
         serial_out(up, UART_IER, up->ier);
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_tx(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
-        struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
-        if (up->use_dma &&
-                up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
-                /*
-                 * Check if dma is still active. If yes do nothing,
-                 * return. Else stop dma
-                 */
-                if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel))
-                        return;
-                omap_stop_dma(up->uart_dma.tx_dma_channel);
-                omap_free_dma(up->uart_dma.tx_dma_channel);
-                up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
-                pm_runtime_mark_last_busy(&up->pdev->dev);
-                pm_runtime_put_autosuspend(&up->pdev->dev);
-        }
-
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         if (up->ier & UART_IER_THRI) {
                 up->ier &= ~UART_IER_THRI;
                 serial_out(up, UART_IER, up->ier);
         }
 
-        if (!up->use_dma && pdata && pdata->set_forceidle)
-                pdata->set_forceidle(up->pdev);
+        serial_omap_set_forceidle(up);
 
-        pm_runtime_mark_last_busy(&up->pdev->dev);
-        pm_runtime_put_autosuspend(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_rx(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
-        pm_runtime_get_sync(&up->pdev->dev);
-        if (up->use_dma)
-                serial_omap_stop_rxdma(up);
+        pm_runtime_get_sync(up->dev);
         up->ier &= ~UART_IER_RLSI;
         up->port.read_status_mask &= ~UART_LSR_DR;
         serial_out(up, UART_IER, up->ier);
-        pm_runtime_mark_last_busy(&up->pdev->dev);
-        pm_runtime_put_autosuspend(&up->pdev->dev);
-}
-
-static inline void receive_chars(struct uart_omap_port *up,
-                unsigned int *status)
-{
-        struct tty_struct *tty = up->port.state->port.tty;
-        unsigned int flag, lsr = *status;
-        unsigned char ch = 0;
-        int max_count = 256;
-
-        do {
-                if (likely(lsr & UART_LSR_DR))
-                        ch = serial_in(up, UART_RX);
-                flag = TTY_NORMAL;
-                up->port.icount.rx++;
-
-                if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
-                        /*
-                         * For statistics only
-                         */
-                        if (lsr & UART_LSR_BI) {
-                                lsr &= ~(UART_LSR_FE | UART_LSR_PE);
-                                up->port.icount.brk++;
-                                /*
-                                 * We do the SysRQ and SAK checking
-                                 * here because otherwise the break
-                                 * may get masked by ignore_status_mask
-                                 * or read_status_mask.
-                                 */
-                                if (uart_handle_break(&up->port))
-                                        goto ignore_char;
-                        } else if (lsr & UART_LSR_PE) {
-                                up->port.icount.parity++;
-                        } else if (lsr & UART_LSR_FE) {
-                                up->port.icount.frame++;
-                        }
-
-                        if (lsr & UART_LSR_OE)
-                                up->port.icount.overrun++;
-
-                        /*
-                         * Mask off conditions which should be ignored.
-                         */
-                        lsr &= up->port.read_status_mask;
-
-#ifdef CONFIG_SERIAL_OMAP_CONSOLE
-                        if (up->port.line == up->port.cons->index) {
-                                /* Recover the break flag from console xmit */
-                                lsr |= up->lsr_break_flag;
-                        }
-#endif
-                        if (lsr & UART_LSR_BI)
-                                flag = TTY_BREAK;
-                        else if (lsr & UART_LSR_PE)
-                                flag = TTY_PARITY;
-                        else if (lsr & UART_LSR_FE)
-                                flag = TTY_FRAME;
-                }
-
-                if (uart_handle_sysrq_char(&up->port, ch))
-                        goto ignore_char;
-                uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
-ignore_char:
-                lsr = serial_in(up, UART_LSR);
-        } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
-        spin_unlock(&up->port.lock);
-        tty_flip_buffer_push(tty);
-        spin_lock(&up->port.lock);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 }
 
-static void transmit_chars(struct uart_omap_port *up)
+static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
 {
         struct circ_buf *xmit = &up->port.state->xmit;
         int count;
 
+        if (!(lsr & UART_LSR_THRE))
+                return;
+
         if (up->port.x_char) {
                 serial_out(up, UART_TX, up->port.x_char);
                 up->port.icount.tx++;
@@ -290,8 +274,11 @@ static void transmit_chars(struct uart_omap_port *up)
                         break;
         } while (--count > 0);
 
-        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+                spin_unlock(&up->port.lock);
                 uart_write_wakeup(&up->port);
+                spin_lock(&up->port.lock);
+        }
 
         if (uart_circ_empty(xmit))
                 serial_omap_stop_tx(&up->port);
@@ -307,70 +294,13 @@ static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up)
 
 static void serial_omap_start_tx(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
-        struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
-        struct circ_buf *xmit;
-        unsigned int start;
-        int ret = 0;
-
-        if (!up->use_dma) {
-                pm_runtime_get_sync(&up->pdev->dev);
-                serial_omap_enable_ier_thri(up);
-                if (pdata && pdata->set_noidle)
-                        pdata->set_noidle(up->pdev);
-                pm_runtime_mark_last_busy(&up->pdev->dev);
-                pm_runtime_put_autosuspend(&up->pdev->dev);
-                return;
-        }
-
-        if (up->uart_dma.tx_dma_used)
-                return;
-
-        xmit = &up->port.state->xmit;
-
-        if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
-                pm_runtime_get_sync(&up->pdev->dev);
-                ret = omap_request_dma(up->uart_dma.uart_dma_tx,
-                                "UART Tx DMA",
-                                (void *)uart_tx_dma_callback, up,
-                                &(up->uart_dma.tx_dma_channel));
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
-                if (ret < 0) {
-                        serial_omap_enable_ier_thri(up);
-                        return;
-                }
-        }
-        spin_lock(&(up->uart_dma.tx_lock));
-        up->uart_dma.tx_dma_used = true;
-        spin_unlock(&(up->uart_dma.tx_lock));
-
-        start = up->uart_dma.tx_buf_dma_phys +
-                                (xmit->tail & (UART_XMIT_SIZE - 1));
-
-        up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
-        /*
-         * It is a circular buffer. See if the buffer has wounded back.
-         * If yes it will have to be transferred in two separate dma
-         * transfers
-         */
-        if (start + up->uart_dma.tx_buf_size >=
-                        up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
-                up->uart_dma.tx_buf_size =
-                        (up->uart_dma.tx_buf_dma_phys +
-                        UART_XMIT_SIZE) - start;
-
-        omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
-                                OMAP_DMA_AMODE_CONSTANT,
-                                up->uart_dma.uart_base, 0, 0);
-        omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
-                                OMAP_DMA_AMODE_POST_INC, start, 0, 0);
-        omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
-                                OMAP_DMA_DATA_TYPE_S8,
-                                up->uart_dma.tx_buf_size, 1,
-                                OMAP_DMA_SYNC_ELEMENT,
-                                up->uart_dma.uart_dma_tx, 0);
-        /* FIXME: Cache maintenance needed here? */
-        omap_start_dma(up->uart_dma.tx_dma_channel);
+        pm_runtime_get_sync(up->dev);
+        serial_omap_enable_ier_thri(up);
+        serial_omap_set_noidle(up);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 }
 
 static unsigned int check_modem_status(struct uart_omap_port *up)
@@ -401,76 +331,158 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
         return status;
 }
 
+static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
+{
+        unsigned int flag;
+
+        up->port.icount.rx++;
+        flag = TTY_NORMAL;
+
+        if (lsr & UART_LSR_BI) {
+                flag = TTY_BREAK;
+                lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+                up->port.icount.brk++;
+                /*
+                 * We do the SysRQ and SAK checking
+                 * here because otherwise the break
+                 * may get masked by ignore_status_mask
+                 * or read_status_mask.
+                 */
+                if (uart_handle_break(&up->port))
+                        return;
+
+        }
+
+        if (lsr & UART_LSR_PE) {
+                flag = TTY_PARITY;
+                up->port.icount.parity++;
+        }
+
+        if (lsr & UART_LSR_FE) {
+                flag = TTY_FRAME;
+                up->port.icount.frame++;
+        }
+
+        if (lsr & UART_LSR_OE)
+                up->port.icount.overrun++;
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+        if (up->port.line == up->port.cons->index) {
+                /* Recover the break flag from console xmit */
+                lsr |= up->lsr_break_flag;
+        }
+#endif
+        uart_insert_char(&up->port, lsr, UART_LSR_OE, 0, flag);
+}
+
+static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr)
+{
+        unsigned char ch = 0;
+        unsigned int flag;
+
+        if (!(lsr & UART_LSR_DR))
+                return;
+
+        ch = serial_in(up, UART_RX);
+        flag = TTY_NORMAL;
+        up->port.icount.rx++;
+
+        if (uart_handle_sysrq_char(&up->port, ch))
+                return;
+
+        uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+}
+
 /**
  * serial_omap_irq() - This handles the interrupt from one port
  * @irq: uart port irq number
  * @dev_id: uart port info
  */
-static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
+static irqreturn_t serial_omap_irq(int irq, void *dev_id)
 {
         struct uart_omap_port *up = dev_id;
+        struct tty_struct *tty = up->port.state->port.tty;
         unsigned int iir, lsr;
-        unsigned long flags;
+        unsigned int type;
+        irqreturn_t ret = IRQ_NONE;
+        int max_count = 256;
 
-        pm_runtime_get_sync(&up->pdev->dev);
-        iir = serial_in(up, UART_IIR);
-        if (iir & UART_IIR_NO_INT) {
-                pm_runtime_mark_last_busy(&up->pdev->dev);
-                pm_runtime_put_autosuspend(&up->pdev->dev);
-                return IRQ_NONE;
-        }
+        spin_lock(&up->port.lock);
+        pm_runtime_get_sync(up->dev);
 
-        spin_lock_irqsave(&up->port.lock, flags);
-        lsr = serial_in(up, UART_LSR);
-        if (iir & UART_IIR_RLSI) {
-                if (!up->use_dma) {
-                        if (lsr & UART_LSR_DR)
-                                receive_chars(up, &lsr);
-                } else {
-                        up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
-                        serial_out(up, UART_IER, up->ier);
-                        if ((serial_omap_start_rxdma(up) != 0) &&
-                                        (lsr & UART_LSR_DR))
-                                receive_chars(up, &lsr);
+        do {
+                iir = serial_in(up, UART_IIR);
+                if (iir & UART_IIR_NO_INT)
+                        break;
+
+                ret = IRQ_HANDLED;
+                lsr = serial_in(up, UART_LSR);
+
+                /* extract IRQ type from IIR register */
+                type = iir & 0x3e;
+
+                switch (type) {
+                case UART_IIR_MSI:
+                        check_modem_status(up);
+                        break;
+                case UART_IIR_THRI:
+                        transmit_chars(up, lsr);
+                        break;
+                case UART_IIR_RX_TIMEOUT:
+                        /* FALLTHROUGH */
+                case UART_IIR_RDI:
+                        serial_omap_rdi(up, lsr);
+                        break;
+                case UART_IIR_RLSI:
+                        serial_omap_rlsi(up, lsr);
+                        break;
+                case UART_IIR_CTS_RTS_DSR:
+                        /* simply try again */
+                        break;
+                case UART_IIR_XOFF:
+                        /* FALLTHROUGH */
+                default:
+                        break;
                 }
-        }
+        } while (!(iir & UART_IIR_NO_INT) && max_count--);
 
-        check_modem_status(up);
-        if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
-                transmit_chars(up);
+        spin_unlock(&up->port.lock);
 
-        spin_unlock_irqrestore(&up->port.lock, flags);
-        pm_runtime_mark_last_busy(&up->pdev->dev);
-        pm_runtime_put_autosuspend(&up->pdev->dev);
+        tty_flip_buffer_push(tty);
 
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
         up->port_activity = jiffies;
-        return IRQ_HANDLED;
+
+        return ret;
 }
 
 static unsigned int serial_omap_tx_empty(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned long flags = 0;
         unsigned int ret = 0;
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
         spin_lock_irqsave(&up->port.lock, flags);
         ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
         spin_unlock_irqrestore(&up->port.lock, flags);
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
         return ret;
 }
 
 static unsigned int serial_omap_get_mctrl(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned int status;
         unsigned int ret = 0;
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         status = check_modem_status(up);
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 
         dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
 
@@ -487,7 +499,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
 
 static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned char mcr = 0;
 
         dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line);
@@ -502,20 +514,31 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
         if (mctrl & TIOCM_LOOP)
                 mcr |= UART_MCR_LOOP;
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         up->mcr = serial_in(up, UART_MCR);
         up->mcr |= mcr;
         serial_out(up, UART_MCR, up->mcr);
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
+
+        if (gpio_is_valid(up->DTR_gpio) &&
+            !!(mctrl & TIOCM_DTR) != up->DTR_active) {
+                up->DTR_active = !up->DTR_active;
+                if (gpio_cansleep(up->DTR_gpio))
+                        schedule_work(&up->qos_work);
+                else
+                        gpio_set_value(up->DTR_gpio,
+                                       up->DTR_active != up->DTR_inverted);
+        }
 }
 
 static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned long flags = 0;
 
         dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         spin_lock_irqsave(&up->port.lock, flags);
         if (break_state == -1)
                 up->lcr |= UART_LCR_SBC;
@@ -523,12 +546,13 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
                 up->lcr &= ~UART_LCR_SBC;
         serial_out(up, UART_LCR, up->lcr);
         spin_unlock_irqrestore(&up->port.lock, flags);
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 }
 
 static int serial_omap_startup(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned long flags = 0;
         int retval;
 
@@ -542,7 +566,7 @@ static int serial_omap_startup(struct uart_port *port)
 
         dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         /*
          * Clear the FIFO buffers and disable them.
          * (they will be reenabled in set_termios())
@@ -573,20 +597,6 @@ static int serial_omap_startup(struct uart_port *port)
         spin_unlock_irqrestore(&up->port.lock, flags);
 
         up->msr_saved_flags = 0;
-        if (up->use_dma) {
-                free_page((unsigned long)up->port.state->xmit.buf);
-                up->port.state->xmit.buf = dma_alloc_coherent(NULL,
-                        UART_XMIT_SIZE,
-                        (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
-                        0);
-                init_timer(&(up->uart_dma.rx_timer));
-                up->uart_dma.rx_timer.function = serial_omap_rxdma_poll;
-                up->uart_dma.rx_timer.data = up->port.line;
-                /* Currently the buffer size is 4KB. Can increase it */
-                up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
-                        up->uart_dma.rx_buf_size,
-                        (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
-        }
         /*
          * Finally, enable interrupts. Note: Modem status interrupts
          * are set via set_termios(), which will be occurring imminently
@@ -598,20 +608,20 @@ static int serial_omap_startup(struct uart_port *port)
         /* Enable module level wake up */
         serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
 
-        pm_runtime_mark_last_busy(&up->pdev->dev);
-        pm_runtime_put_autosuspend(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
         up->port_activity = jiffies;
         return 0;
 }
 
 static void serial_omap_shutdown(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned long flags = 0;
 
         dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         /*
          * Disable interrupts from this port
          */
@@ -634,19 +644,9 @@ static void serial_omap_shutdown(struct uart_port *port)
          */
         if (serial_in(up, UART_LSR) & UART_LSR_DR)
                 (void) serial_in(up, UART_RX);
-        if (up->use_dma) {
-                dma_free_coherent(up->port.dev,
-                        UART_XMIT_SIZE, up->port.state->xmit.buf,
-                        up->uart_dma.tx_buf_dma_phys);
-                up->port.state->xmit.buf = NULL;
-                serial_omap_stop_rx(port);
-                dma_free_coherent(up->port.dev,
-                        up->uart_dma.rx_buf_size, up->uart_dma.rx_buf,
-                        up->uart_dma.rx_buf_dma_phys);
-                up->uart_dma.rx_buf = NULL;
-        }
 
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
         free_irq(up->port.irq, up);
 }
 
@@ -667,19 +667,19 @@ serial_omap_configure_xonxoff
 
         /*
          * IXON Flag:
-         * Enable XON/XOFF flow control on output.
-         * Transmit XON1, XOFF1
+         * Flow control for OMAP.TX
+         * OMAP.RX should listen for XON/XOFF
          */
         if (termios->c_iflag & IXON)
-                up->efr |= OMAP_UART_SW_TX;
+                up->efr |= OMAP_UART_SW_RX;
 
         /*
          * IXOFF Flag:
-         * Enable XON/XOFF flow control on input.
-         * Receiver compares XON1, XOFF1.
+         * Flow control for OMAP.RX
+         * OMAP.TX should send XON/XOFF
          */
         if (termios->c_iflag & IXOFF)
-                up->efr |= OMAP_UART_SW_RX;
+                up->efr |= OMAP_UART_SW_TX;
 
         serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
         serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
@@ -715,13 +715,16 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
                                                 qos_work);
 
         pm_qos_update_request(&up->pm_qos_request, up->latency);
+        if (gpio_is_valid(up->DTR_gpio))
+                gpio_set_value_cansleep(up->DTR_gpio,
+                                        up->DTR_active != up->DTR_inverted);
 }
 
 static void
 serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
                         struct ktermios *old)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned char cval = 0;
         unsigned char efr = 0;
         unsigned long flags = 0;
@@ -768,14 +771,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
         up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
                         UART_FCR_ENABLE_FIFO;
-        if (up->use_dma)
-                up->fcr |= UART_FCR_DMA_SELECT;
 
         /*
          * Ok, we're now changing the port state. Do it with
          * interrupts disabled.
          */
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         spin_lock_irqsave(&up->port.lock, flags);
 
         /*
@@ -845,14 +846,13 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
         up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
 
-        if (up->use_dma) {
-                serial_out(up, UART_TI752_TLR, 0);
-                up->scr |= UART_FCR_TRIGGER_4;
-        } else {
-                /* Set receive FIFO threshold to 1 byte */
-                up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
-                up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT);
-        }
+        /* Set receive FIFO threshold to 16 characters and
+         * transmit FIFO threshold to 16 spaces
+         */
+        up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
+        up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK;
+        up->fcr |= UART_FCR6_R_TRIGGER_16 | UART_FCR6_T_TRIGGER_24 |
+                UART_FCR_ENABLE_FIFO;
 
         serial_out(up, UART_FCR, up->fcr);
         serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -924,20 +924,30 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
         serial_omap_configure_xonxoff(up, termios);
 
         spin_unlock_irqrestore(&up->port.lock, flags);
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
         dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
+static int serial_omap_set_wake(struct uart_port *port, unsigned int state)
+{
+        struct uart_omap_port *up = to_uart_omap_port(port);
+
+        serial_omap_enable_wakeup(up, state);
+
+        return 0;
+}
+
 static void
 serial_omap_pm(struct uart_port *port, unsigned int state,
                unsigned int oldstate)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned char efr;
 
         dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
         efr = serial_in(up, UART_EFR);
         serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@@ -948,14 +958,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
         serial_out(up, UART_EFR, efr);
         serial_out(up, UART_LCR, 0);
 
-        if (!device_may_wakeup(&up->pdev->dev)) {
+        if (!device_may_wakeup(up->dev)) {
                 if (!state)
-                        pm_runtime_forbid(&up->pdev->dev);
+                        pm_runtime_forbid(up->dev);
                 else
-                        pm_runtime_allow(&up->pdev->dev);
+                        pm_runtime_allow(up->dev);
         }
 
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
@@ -971,7 +982,7 @@ static int serial_omap_request_port(struct uart_port *port)
 
 static void serial_omap_config_port(struct uart_port *port, int flags)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
         dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
                                                         up->port.line);
@@ -989,7 +1000,7 @@ serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser)
 static const char *
 serial_omap_type(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
         dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line);
         return up->name;
@@ -1032,26 +1043,33 @@ static inline void wait_for_xmitr(struct uart_omap_port *up)
 
 static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         wait_for_xmitr(up);
         serial_out(up, UART_TX, ch);
-        pm_runtime_put(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
 }
 
 static int serial_omap_poll_get_char(struct uart_port *port)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
         unsigned int status;
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
         status = serial_in(up, UART_LSR);
-        if (!(status & UART_LSR_DR))
-                return NO_POLL_CHAR;
+        if (!(status & UART_LSR_DR)) {
+                status = NO_POLL_CHAR;
+                goto out;
+        }
 
         status = serial_in(up, UART_RX);
-        pm_runtime_put(&up->pdev->dev);
+
+out:
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
+
         return status;
 }
 
@@ -1065,7 +1083,7 @@ static struct uart_driver serial_omap_reg;
 
 static void serial_omap_console_putchar(struct uart_port *port, int ch)
 {
-        struct uart_omap_port *up = (struct uart_omap_port *)port;
+        struct uart_omap_port *up = to_uart_omap_port(port);
 
         wait_for_xmitr(up);
         serial_out(up, UART_TX, ch);
@@ -1080,7 +1098,7 @@ serial_omap_console_write(struct console *co, const char *s,
         unsigned int ier;
         int locked = 1;
 
-        pm_runtime_get_sync(&up->pdev->dev);
+        pm_runtime_get_sync(up->dev);
 
         local_irq_save(flags);
         if (up->port.sysrq)
@@ -1114,8 +1132,8 @@ serial_omap_console_write(struct console *co, const char *s,
         if (up->msr_saved_flags)
                 check_modem_status(up);
 
-        pm_runtime_mark_last_busy(&up->pdev->dev);
-        pm_runtime_put_autosuspend(&up->pdev->dev);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
         if (locked)
                 spin_unlock(&up->port.lock);
         local_irq_restore(flags);
@@ -1179,6 +1197,7 @@ static struct uart_ops serial_omap_pops = {
         .shutdown       = serial_omap_shutdown,
         .set_termios    = serial_omap_set_termios,
         .pm             = serial_omap_pm,
+        .set_wake       = serial_omap_set_wake,
         .type           = serial_omap_type,
         .release_port   = serial_omap_release_port,
         .request_port   = serial_omap_request_port,
@@ -1221,150 +1240,7 @@ static int serial_omap_resume(struct device *dev)
 }
 #endif
 
-static void serial_omap_rxdma_poll(unsigned long uart_no)
-{
-        struct uart_omap_port *up = ui[uart_no];
-        unsigned int curr_dma_pos, curr_transmitted_size;
-        int ret = 0;
-
-        curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel);
-        if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
-                             (curr_dma_pos == 0)) {
-                if (jiffies_to_msecs(jiffies - up->port_activity) <
-                                                up->uart_dma.rx_timeout) {
-                        mod_timer(&up->uart_dma.rx_timer, jiffies +
-                                usecs_to_jiffies(up->uart_dma.rx_poll_rate));
-                } else {
-                        serial_omap_stop_rxdma(up);
-                        up->ier |= (UART_IER_RDI | UART_IER_RLSI);
-                        serial_out(up, UART_IER, up->ier);
-                }
-                return;
-        }
-
-        curr_transmitted_size = curr_dma_pos -
-                                        up->uart_dma.prev_rx_dma_pos;
-        up->port.icount.rx += curr_transmitted_size;
-        tty_insert_flip_string(up->port.state->port.tty,
-                        up->uart_dma.rx_buf +
-                        (up->uart_dma.prev_rx_dma_pos -
-                        up->uart_dma.rx_buf_dma_phys),
-                        curr_transmitted_size);
-        tty_flip_buffer_push(up->port.state->port.tty);
-        up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
-        if (up->uart_dma.rx_buf_size +
-                        up->uart_dma.rx_buf_dma_phys == curr_dma_pos) {
-                ret = serial_omap_start_rxdma(up);
-                if (ret < 0) {
-                        serial_omap_stop_rxdma(up);
-                        up->ier |= (UART_IER_RDI | UART_IER_RLSI);
-                        serial_out(up, UART_IER, up->ier);
-                }
-        } else  {
-                mod_timer(&up->uart_dma.rx_timer, jiffies +
-                        usecs_to_jiffies(up->uart_dma.rx_poll_rate));
-        }
-        up->port_activity = jiffies;
-}
-
-static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
-{
-        return;
-}
-
-static int serial_omap_start_rxdma(struct uart_omap_port *up)
-{
-        int ret = 0;
-
-        if (up->uart_dma.rx_dma_channel == -1) {
-                pm_runtime_get_sync(&up->pdev->dev);
-                ret = omap_request_dma(up->uart_dma.uart_dma_rx,
-                                "UART Rx DMA",
-                                (void *)uart_rx_dma_callback, up,
-                                &(up->uart_dma.rx_dma_channel));
-                if (ret < 0)
-                        return ret;
-
-                omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
-                                OMAP_DMA_AMODE_CONSTANT,
-                                up->uart_dma.uart_base, 0, 0);
-                omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
-                                OMAP_DMA_AMODE_POST_INC,
-                                up->uart_dma.rx_buf_dma_phys, 0, 0);
-                omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
-                                OMAP_DMA_DATA_TYPE_S8,
-                                up->uart_dma.rx_buf_size, 1,
-                                OMAP_DMA_SYNC_ELEMENT,
-                                up->uart_dma.uart_dma_rx, 0);
-        }
-        up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
-        /* FIXME: Cache maintenance needed here? */
-        omap_start_dma(up->uart_dma.rx_dma_channel);
-        mod_timer(&up->uart_dma.rx_timer, jiffies +
-                                usecs_to_jiffies(up->uart_dma.rx_poll_rate));
-        up->uart_dma.rx_dma_used = true;
-        return ret;
-}
-
-static void serial_omap_continue_tx(struct uart_omap_port *up)
-{
-        struct circ_buf *xmit = &up->port.state->xmit;
-        unsigned int start = up->uart_dma.tx_buf_dma_phys
-                        + (xmit->tail & (UART_XMIT_SIZE - 1));
-
-        if (uart_circ_empty(xmit))
-                return;
-
-        up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
-        /*
-         * It is a circular buffer. See if the buffer has wounded back.
-         * If yes it will have to be transferred in two separate dma
-         * transfers
-         */
-        if (start + up->uart_dma.tx_buf_size >=
-                        up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
-                up->uart_dma.tx_buf_size =
-                        (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
-        omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
-                                OMAP_DMA_AMODE_CONSTANT,
-                                up->uart_dma.uart_base, 0, 0);
-        omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
-                                OMAP_DMA_AMODE_POST_INC, start, 0, 0);
-        omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
-                                OMAP_DMA_DATA_TYPE_S8,
-                                up->uart_dma.tx_buf_size, 1,
-                                OMAP_DMA_SYNC_ELEMENT,
-                                up->uart_dma.uart_dma_tx, 0);
-        /* FIXME: Cache maintenance needed here? */
-        omap_start_dma(up->uart_dma.tx_dma_channel);
-}
-
-static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
-{
-        struct uart_omap_port *up = (struct uart_omap_port *)data;
-        struct circ_buf *xmit = &up->port.state->xmit;
-
-        xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \
-                        (UART_XMIT_SIZE - 1);
-        up->port.icount.tx += up->uart_dma.tx_buf_size;
-
-        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-                uart_write_wakeup(&up->port);
-
-        if (uart_circ_empty(xmit)) {
-                spin_lock(&(up->uart_dma.tx_lock));
-                serial_omap_stop_tx(&up->port);
-                up->uart_dma.tx_dma_used = false;
-                spin_unlock(&(up->uart_dma.tx_lock));
-        } else {
-                omap_stop_dma(up->uart_dma.tx_dma_channel);
-                serial_omap_continue_tx(up);
-        }
-        up->port_activity = jiffies;
-        return;
-}
-
-static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
+static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *up)
 {
         u32 mvr, scheme;
         u16 revision, major, minor;
@@ -1389,7 +1265,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
                 minor = (mvr & OMAP_UART_MVR_MIN_MASK);
                 break;
         default:
-                dev_warn(&up->pdev->dev,
+                dev_warn(up->dev,
                         "Unknown %s revision, defaulting to highest\n",
                         up->name);
                 /* highest possible revision */
@@ -1417,7 +1293,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
         }
 }
 
-static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
+static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
 {
         struct omap_uart_port_info *omap_up_info;
 
@@ -1430,12 +1306,12 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
         return omap_up_info;
 }
 
-static int serial_omap_probe(struct platform_device *pdev)
+static int __devinit serial_omap_probe(struct platform_device *pdev)
 {
         struct uart_omap_port   *up;
-        struct resource         *mem, *irq, *dma_tx, *dma_rx;
+        struct resource         *mem, *irq;
         struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
-        int ret = -ENOSPC;
+        int ret;
 
         if (pdev->dev.of_node)
                 omap_up_info = of_get_uart_port_info(&pdev->dev);
@@ -1458,19 +1334,30 @@ static int serial_omap_probe(struct platform_device *pdev)
                 return -EBUSY;
         }
 
-        dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
-        if (!dma_rx)
-                return -ENXIO;
-
-        dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
-        if (!dma_tx)
-                return -ENXIO;
+        if (gpio_is_valid(omap_up_info->DTR_gpio) &&
+            omap_up_info->DTR_present) {
+                ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial");
+                if (ret < 0)
+                        return ret;
+                ret = gpio_direction_output(omap_up_info->DTR_gpio,
+                                            omap_up_info->DTR_inverted);
+                if (ret < 0)
+                        return ret;
+        }
 
         up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
         if (!up)
                 return -ENOMEM;
 
-        up->pdev = pdev;
+        if (gpio_is_valid(omap_up_info->DTR_gpio) &&
+            omap_up_info->DTR_present) {
+                up->DTR_gpio = omap_up_info->DTR_gpio;
+                up->DTR_inverted = omap_up_info->DTR_inverted;
+        } else
+                up->DTR_gpio = -EINVAL;
+        up->DTR_active = 0;
+
+        up->dev = &pdev->dev;
         up->port.dev = &pdev->dev;
         up->port.type = PORT_OMAP;
         up->port.iotype = UPIO_MEM;
@@ -1492,6 +1379,13 @@ static int serial_omap_probe(struct platform_device *pdev)
                 goto err_port_line;
         }
 
+        up->pins = devm_pinctrl_get_select_default(&pdev->dev);
+        if (IS_ERR(up->pins)) {
+                dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n",
+                         up->port.line, PTR_ERR(up->pins));
+                up->pins = NULL;
+        }
+
         sprintf(up->name, "OMAP UART%d", up->port.line);
         up->port.mapbase = mem->start;
         up->port.membase = devm_ioremap(&pdev->dev, mem->start,
@@ -1509,20 +1403,6 @@ static int serial_omap_probe(struct platform_device *pdev)
                 dev_warn(&pdev->dev, "No clock speed specified: using default:"
                                                 "%d\n", DEFAULT_CLK_SPEED);
         }
-        up->uart_dma.uart_base = mem->start;
-
-        if (omap_up_info->dma_enabled) {
-                up->uart_dma.uart_dma_tx = dma_tx->start;
-                up->uart_dma.uart_dma_rx = dma_rx->start;
-                up->use_dma = 1;
-                up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size;
-                up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout;
-                up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate;
-                spin_lock_init(&(up->uart_dma.tx_lock));
-                spin_lock_init(&(up->uart_dma.rx_lock));
-                up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
-                up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
-        }
 
         up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
         up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
@@ -1531,12 +1411,13 @@ static int serial_omap_probe(struct platform_device *pdev)
         serial_omap_uart_wq = create_singlethread_workqueue(up->name);
         INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
 
+        platform_set_drvdata(pdev, up);
+        pm_runtime_enable(&pdev->dev);
         pm_runtime_use_autosuspend(&pdev->dev);
         pm_runtime_set_autosuspend_delay(&pdev->dev,
                         omap_up_info->autosuspend_timeout);
 
         pm_runtime_irq_safe(&pdev->dev);
-        pm_runtime_enable(&pdev->dev);
         pm_runtime_get_sync(&pdev->dev);
 
         omap_serial_fill_features_erratas(up);
@@ -1548,8 +1429,8 @@ static int serial_omap_probe(struct platform_device *pdev)
         if (ret != 0)
                 goto err_add_port;
 
-        pm_runtime_put(&pdev->dev);
-        platform_set_drvdata(pdev, up);
+        pm_runtime_mark_last_busy(up->dev);
+        pm_runtime_put_autosuspend(up->dev);
         return 0;
 
 err_add_port:
@@ -1562,17 +1443,15 @@ err_port_line:
         return ret;
 }
 
-static int serial_omap_remove(struct platform_device *dev)
+static int __devexit serial_omap_remove(struct platform_device *dev)
 {
         struct uart_omap_port *up = platform_get_drvdata(dev);
 
-        if (up) {
-                pm_runtime_disable(&up->pdev->dev);
-                uart_remove_one_port(&serial_omap_reg, &up->port);
-                pm_qos_remove_request(&up->pm_qos_request);
-        }
+        pm_runtime_put_sync(up->dev);
+        pm_runtime_disable(up->dev);
+        uart_remove_one_port(&serial_omap_reg, &up->port);
+        pm_qos_remove_request(&up->pm_qos_request);
 
-        platform_set_drvdata(dev, NULL);
         return 0;
 }
 
@@ -1602,7 +1481,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
                 timeout--;
                 if (!timeout) {
                         /* Should *never* happen. we warn and carry on */
-                        dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n",
+                        dev_crit(up->dev, "Errata i202: timedout %x\n",
                                                 serial_in(up, UART_LSR));
                         break;
                 }
@@ -1648,29 +1527,23 @@ static int serial_omap_runtime_suspend(struct device *dev)
         if (!up)
                 return -EINVAL;
 
-        if (!pdata || !pdata->enable_wakeup)
+        if (!pdata)
                 return 0;
 
-        if (pdata->get_context_loss_count)
-                up->context_loss_cnt = pdata->get_context_loss_count(dev);
+        up->context_loss_cnt = serial_omap_get_context_loss_count(up);
 
         if (device_may_wakeup(dev)) {
                 if (!up->wakeups_enabled) {
-                        pdata->enable_wakeup(up->pdev, true);
+                        serial_omap_enable_wakeup(up, true);
                         up->wakeups_enabled = true;
                 }
         } else {
                 if (up->wakeups_enabled) {
-                        pdata->enable_wakeup(up->pdev, false);
+                        serial_omap_enable_wakeup(up, false);
                         up->wakeups_enabled = false;
                 }
         }
 
-        /* Errata i291 */
-        if (up->use_dma && pdata->set_forceidle &&
-                        (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
-                pdata->set_forceidle(up->pdev);
-
         up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
         schedule_work(&up->qos_work);
 
@@ -1683,17 +1556,10 @@ static int serial_omap_runtime_resume(struct device *dev)
         struct omap_uart_port_info *pdata = dev->platform_data;
 
         if (up && pdata) {
-                if (pdata->get_context_loss_count) {
-                        u32 loss_cnt = pdata->get_context_loss_count(dev);
+                        u32 loss_cnt = serial_omap_get_context_loss_count(up);
 
                         if (up->context_loss_cnt != loss_cnt)
                                 serial_omap_restore_context(up);
-                }
-
-                /* Errata i291 */
-                if (up->use_dma && pdata->set_noidle &&
-                                (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
-                        pdata->set_noidle(up->pdev);
 
                 up->latency = up->calc_latency;
                 schedule_work(&up->qos_work);
@@ -1721,7 +1587,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match);
 
 static struct platform_driver serial_omap_driver = {
         .probe          = serial_omap_probe,
-        .remove         = serial_omap_remove,
+        .remove         = __devexit_p(serial_omap_remove),
         .driver         = {
                 .name   = DRIVER_NAME,
                 .pm     = &serial_omap_dev_pm_ops,
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 558ce8509a9a..4cd6c2381528 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -979,6 +979,10 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
         priv->tx_dma_use = 1;
 
         priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+        if (!priv->sg_tx_p) {
+                dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
+                return 0;
+        }
 
         sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
         sg = priv->sg_tx_p;
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 5847a4b855f7..9033fc6e0e4e 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -670,9 +670,19 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 {
         struct uart_pxa_port *up = serial_pxa_ports[co->index];
         unsigned int ier;
+        unsigned long flags;
+        int locked = 1;
 
         clk_prepare_enable(up->clk);
 
+        local_irq_save(flags);
+        if (up->port.sysrq)
+                locked = 0;
+        else if (oops_in_progress)
+                locked = spin_trylock(&up->port.lock);
+        else
+                spin_lock(&up->port.lock);
+
         /*
          *      First save the IER then disable the interrupts
          */
@@ -688,6 +698,10 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
         wait_for_xmitr(up);
         serial_out(up, UART_IER, ier);
 
+        if (locked)
+                spin_unlock(&up->port.lock);
+        local_irq_restore(flags);
+
         clk_disable_unprepare(up->clk);
 }
 
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 02d07bfcfa8a..bdaa06f3ab69 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -82,7 +82,7 @@ static inline const char *s3c24xx_serial_portname(struct uart_port *port)
 
 static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
 {
-        return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
+        return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
 }
 
 /*
@@ -268,7 +268,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
                                 dbg("break!\n");
                                 port->icount.brk++;
                                 if (uart_handle_break(port))
-                                    goto ignore_char;
+                                        goto ignore_char;
                         }
 
                         if (uerstat & S3C2410_UERSTAT_FRAME)
@@ -459,7 +459,7 @@ static int s3c24xx_serial_startup(struct uart_port *port)
                           s3c24xx_serial_portname(port), ourport);
 
         if (ret != 0) {
-                printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
+                dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
                 return ret;
         }
 
@@ -473,7 +473,7 @@ static int s3c24xx_serial_startup(struct uart_port *port)
                           s3c24xx_serial_portname(port), ourport);
 
         if (ret) {
-                printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
+                dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
                 goto err;
         }
 
@@ -502,7 +502,7 @@ static int s3c64xx_serial_startup(struct uart_port *port)
         ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
                           s3c24xx_serial_portname(port), ourport);
         if (ret) {
-                printk(KERN_ERR "cannot get irq %d\n", port->irq);
+                dev_err(port->dev, "cannot get irq %d\n", port->irq);
                 return ret;
         }
 
@@ -529,7 +529,7 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 
         switch (level) {
         case 3:
-                if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+                if (!IS_ERR(ourport->baudclk))
                         clk_disable(ourport->baudclk);
 
                 clk_disable(ourport->clk);
@@ -538,12 +538,12 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
         case 0:
                 clk_enable(ourport->clk);
 
-                if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+                if (!IS_ERR(ourport->baudclk))
                         clk_enable(ourport->baudclk);
 
                 break;
         default:
-                printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
+                dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
         }
 }
 
@@ -604,7 +604,6 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
         char clkname[MAX_CLK_NAME_LENGTH];
         int calc_deviation, deviation = (1 << 30) - 1;
 
-        *best_clk = NULL;
         clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
                         ourport->info->def_clk_sel;
         for (cnt = 0; cnt < info->num_clks; cnt++) {
@@ -613,7 +612,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 
                 sprintf(clkname, "clk_uart_baud%d", cnt);
                 clk = clk_get(ourport->port.dev, clkname);
-                if (IS_ERR_OR_NULL(clk))
+                if (IS_ERR(clk))
                         continue;
 
                 rate = clk_get_rate(clk);
@@ -684,7 +683,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 {
         struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
         struct s3c24xx_uart_port *ourport = to_ourport(port);
-        struct clk *clk = NULL;
+        struct clk *clk = ERR_PTR(-EINVAL);
         unsigned long flags;
         unsigned int baud, quot, clk_sel = 0;
         unsigned int ulcon;
@@ -705,7 +704,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
         quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
         if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
                 quot = port->custom_divisor;
-        if (!clk)
+        if (IS_ERR(clk))
                 return;
 
         /* check to see if we need  to change clock source */
@@ -713,9 +712,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
         if (ourport->baudclk != clk) {
                 s3c24xx_serial_setsource(port, clk_sel);
 
-                if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+                if (!IS_ERR(ourport->baudclk)) {
                         clk_disable(ourport->baudclk);
-                        ourport->baudclk  = NULL;
+                        ourport->baudclk = ERR_PTR(-EINVAL);
                 }
 
                 clk_enable(clk);
@@ -1036,10 +1035,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
                 if (tty == NULL)
                         goto exit;
 
-                termios = tty->termios;
+                termios = &tty->termios;
 
                 if (termios == NULL) {
-                        printk(KERN_WARNING "%s: no termios?\n", __func__);
+                        dev_warn(uport->dev, "%s: no termios?\n", __func__);
                         goto exit;
                 }
 
@@ -1114,7 +1113,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
         res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
         if (res == NULL) {
-                printk(KERN_ERR "failed to find memory resource for uart\n");
+                dev_err(port->dev, "failed to find memory resource for uart\n");
                 return -EINVAL;
         }
 
@@ -1130,7 +1129,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
                 ourport->rx_irq = ret;
                 ourport->tx_irq = ret + 1;
         }
-        
+
         ret = platform_get_irq(platdev, 1);
         if (ret > 0)
                 ourport->tx_irq = ret;
@@ -1160,7 +1159,11 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
         struct uart_port *port = s3c24xx_dev_to_port(dev);
         struct s3c24xx_uart_port *ourport = to_ourport(port);
 
-        return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
+        if (IS_ERR(ourport->baudclk))
+                return -EINVAL;
+
+        return snprintf(buf, PAGE_SIZE, "* %s\n",
+                        ourport->baudclk->name ?: "(null)");
 }
 
 static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
@@ -1200,6 +1203,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
                 return -ENODEV;
         }
 
+        ourport->baudclk = ERR_PTR(-EINVAL);
         ourport->info = ourport->drv_data->info;
         ourport->cfg = (pdev->dev.platform_data) ?
                         (struct s3c2410_uartcfg *)pdev->dev.platform_data :
@@ -1387,7 +1391,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
                 sprintf(clk_name, "clk_uart_baud%d", clk_sel);
 
                 clk = clk_get(port->dev, clk_name);
-                if (!IS_ERR(clk) && clk != NULL)
+                if (!IS_ERR(clk))
                         rate = clk_get_rate(clk);
                 else
                         rate = 1;
@@ -1679,7 +1683,7 @@ static int __init s3c24xx_serial_modinit(void)
 
         ret = uart_register_driver(&s3c24xx_uart_drv);
         if (ret < 0) {
-                printk(KERN_ERR "failed to register UART driver\n");
+                pr_err("Failed to register Samsung UART driver\n");
                 return -1;
         }
 
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
index e0b4b0a30a5a..9d664242b312 100644
--- a/drivers/tty/serial/sc26xx.c
+++ b/drivers/tty/serial/sc26xx.c
@@ -20,6 +20,10 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/io.h>
+
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+         "in the linux-serial mailing list."
 
 #if defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
new file mode 100644
index 000000000000..05d767cf82a7
--- /dev/null
+++ b/drivers/tty/serial/sccnxp.c
@@ -0,0 +1,985 @@
+/*
+ *  NXP (Philips) SCC+++(SCN+++) serial driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ *  Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#if defined(CONFIG_SERIAL_SCCNXP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sccnxp.h>
+
+#define SCCNXP_NAME                     "uart-sccnxp"
+#define SCCNXP_MAJOR                    204
+#define SCCNXP_MINOR                    205
+
+#define SCCNXP_MR_REG                   (0x00)
+#       define MR0_BAUD_NORMAL          (0 << 0)
+#       define MR0_BAUD_EXT1            (1 << 0)
+#       define MR0_BAUD_EXT2            (5 << 0)
+#       define MR0_FIFO                 (1 << 3)
+#       define MR0_TXLVL                (1 << 4)
+#       define MR1_BITS_5               (0 << 0)
+#       define MR1_BITS_6               (1 << 0)
+#       define MR1_BITS_7               (2 << 0)
+#       define MR1_BITS_8               (3 << 0)
+#       define MR1_PAR_EVN              (0 << 2)
+#       define MR1_PAR_ODD              (1 << 2)
+#       define MR1_PAR_NO               (4 << 2)
+#       define MR2_STOP1                (7 << 0)
+#       define MR2_STOP2                (0xf << 0)
+#define SCCNXP_SR_REG                   (0x01)
+#define SCCNXP_CSR_REG                  SCCNXP_SR_REG
+#       define SR_RXRDY                 (1 << 0)
+#       define SR_FULL                  (1 << 1)
+#       define SR_TXRDY                 (1 << 2)
+#       define SR_TXEMT                 (1 << 3)
+#       define SR_OVR                   (1 << 4)
+#       define SR_PE                    (1 << 5)
+#       define SR_FE                    (1 << 6)
+#       define SR_BRK                   (1 << 7)
+#define SCCNXP_CR_REG                   (0x02)
+#       define CR_RX_ENABLE             (1 << 0)
+#       define CR_RX_DISABLE            (1 << 1)
+#       define CR_TX_ENABLE             (1 << 2)
+#       define CR_TX_DISABLE            (1 << 3)
+#       define CR_CMD_MRPTR1            (0x01 << 4)
+#       define CR_CMD_RX_RESET          (0x02 << 4)
+#       define CR_CMD_TX_RESET          (0x03 << 4)
+#       define CR_CMD_STATUS_RESET      (0x04 << 4)
+#       define CR_CMD_BREAK_RESET       (0x05 << 4)
+#       define CR_CMD_START_BREAK       (0x06 << 4)
+#       define CR_CMD_STOP_BREAK        (0x07 << 4)
+#       define CR_CMD_MRPTR0            (0x0b << 4)
+#define SCCNXP_RHR_REG                  (0x03)
+#define SCCNXP_THR_REG                  SCCNXP_RHR_REG
+#define SCCNXP_IPCR_REG                 (0x04)
+#define SCCNXP_ACR_REG                  SCCNXP_IPCR_REG
+#       define ACR_BAUD0                (0 << 7)
+#       define ACR_BAUD1                (1 << 7)
+#       define ACR_TIMER_MODE           (6 << 4)
+#define SCCNXP_ISR_REG                  (0x05)
+#define SCCNXP_IMR_REG                  SCCNXP_ISR_REG
+#       define IMR_TXRDY                (1 << 0)
+#       define IMR_RXRDY                (1 << 1)
+#       define ISR_TXRDY(x)             (1 << ((x * 4) + 0))
+#       define ISR_RXRDY(x)             (1 << ((x * 4) + 1))
+#define SCCNXP_IPR_REG                  (0x0d)
+#define SCCNXP_OPCR_REG                 SCCNXP_IPR_REG
+#define SCCNXP_SOP_REG                  (0x0e)
+#define SCCNXP_ROP_REG                  (0x0f)
+
+/* Route helpers */
+#define MCTRL_MASK(sig)                 (0xf << (sig))
+#define MCTRL_IBIT(cfg, sig)            ((((cfg) >> (sig)) & 0xf) - LINE_IP0)
+#define MCTRL_OBIT(cfg, sig)            ((((cfg) >> (sig)) & 0xf) - LINE_OP0)
+
+/* Supported chip types */
+enum {
+        SCCNXP_TYPE_SC2681      = 2681,
+        SCCNXP_TYPE_SC2691      = 2691,
+        SCCNXP_TYPE_SC2692      = 2692,
+        SCCNXP_TYPE_SC2891      = 2891,
+        SCCNXP_TYPE_SC2892      = 2892,
+        SCCNXP_TYPE_SC28202     = 28202,
+        SCCNXP_TYPE_SC68681     = 68681,
+        SCCNXP_TYPE_SC68692     = 68692,
+};
+
+struct sccnxp_port {
+        struct uart_driver      uart;
+        struct uart_port        port[SCCNXP_MAX_UARTS];
+
+        const char              *name;
+        int                     irq;
+
+        u8                      imr;
+        u8                      addr_mask;
+        int                     freq_std;
+
+        int                     flags;
+#define SCCNXP_HAVE_IO          0x00000001
+#define SCCNXP_HAVE_MR0         0x00000002
+
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+        struct console          console;
+#endif
+
+        struct mutex            sccnxp_mutex;
+
+        struct sccnxp_pdata     pdata;
+};
+
+static inline u8 sccnxp_raw_read(void __iomem *base, u8 reg, u8 shift)
+{
+        return readb(base + (reg << shift));
+}
+
+static inline void sccnxp_raw_write(void __iomem *base, u8 reg, u8 shift, u8 v)
+{
+        writeb(v, base + (reg << shift));
+}
+
+static inline u8 sccnxp_read(struct uart_port *port, u8 reg)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        return sccnxp_raw_read(port->membase, reg & s->addr_mask,
+                               port->regshift);
+}
+
+static inline void sccnxp_write(struct uart_port *port, u8 reg, u8 v)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        sccnxp_raw_write(port->membase, reg & s->addr_mask, port->regshift, v);
+}
+
+static inline u8 sccnxp_port_read(struct uart_port *port, u8 reg)
+{
+        return sccnxp_read(port, (port->line << 3) + reg);
+}
+
+static inline void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v)
+{
+        sccnxp_write(port, (port->line << 3) + reg, v);
+}
+
+static int sccnxp_update_best_err(int a, int b, int *besterr)
+{
+        int err = abs(a - b);
+
+        if ((*besterr < 0) || (*besterr > err)) {
+                *besterr = err;
+                return 0;
+        }
+
+        return 1;
+}
+
+struct baud_table {
+        u8      csr;
+        u8      acr;
+        u8      mr0;
+        int     baud;
+};
+
+const struct baud_table baud_std[] = {
+        { 0,    ACR_BAUD0,      MR0_BAUD_NORMAL,        50, },
+        { 0,    ACR_BAUD1,      MR0_BAUD_NORMAL,        75, },
+        { 1,    ACR_BAUD0,      MR0_BAUD_NORMAL,        110, },
+        { 2,    ACR_BAUD0,      MR0_BAUD_NORMAL,        134, },
+        { 3,    ACR_BAUD1,      MR0_BAUD_NORMAL,        150, },
+        { 3,    ACR_BAUD0,      MR0_BAUD_NORMAL,        200, },
+        { 4,    ACR_BAUD0,      MR0_BAUD_NORMAL,        300, },
+        { 0,    ACR_BAUD1,      MR0_BAUD_EXT1,          450, },
+        { 1,    ACR_BAUD0,      MR0_BAUD_EXT2,          880, },
+        { 3,    ACR_BAUD1,      MR0_BAUD_EXT1,          900, },
+        { 5,    ACR_BAUD0,      MR0_BAUD_NORMAL,        600, },
+        { 7,    ACR_BAUD0,      MR0_BAUD_NORMAL,        1050, },
+        { 2,    ACR_BAUD0,      MR0_BAUD_EXT2,          1076, },
+        { 6,    ACR_BAUD0,      MR0_BAUD_NORMAL,        1200, },
+        { 10,   ACR_BAUD1,      MR0_BAUD_NORMAL,        1800, },
+        { 7,    ACR_BAUD1,      MR0_BAUD_NORMAL,        2000, },
+        { 8,    ACR_BAUD0,      MR0_BAUD_NORMAL,        2400, },
+        { 5,    ACR_BAUD1,      MR0_BAUD_EXT1,          3600, },
+        { 9,    ACR_BAUD0,      MR0_BAUD_NORMAL,        4800, },
+        { 10,   ACR_BAUD0,      MR0_BAUD_NORMAL,        7200, },
+        { 11,   ACR_BAUD0,      MR0_BAUD_NORMAL,        9600, },
+        { 8,    ACR_BAUD0,      MR0_BAUD_EXT1,          14400, },
+        { 12,   ACR_BAUD1,      MR0_BAUD_NORMAL,        19200, },
+        { 9,    ACR_BAUD0,      MR0_BAUD_EXT1,          28800, },
+        { 12,   ACR_BAUD0,      MR0_BAUD_NORMAL,        38400, },
+        { 11,   ACR_BAUD0,      MR0_BAUD_EXT1,          57600, },
+        { 12,   ACR_BAUD1,      MR0_BAUD_EXT1,          115200, },
+        { 12,   ACR_BAUD0,      MR0_BAUD_EXT1,          230400, },
+        { 0, 0, 0, 0 }
+};
+
+static void sccnxp_set_baud(struct uart_port *port, int baud)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+        int div_std, tmp_baud, bestbaud = baud, besterr = -1;
+        u8 i, acr = 0, csr = 0, mr0 = 0;
+
+        /* Find best baud from table */
+        for (i = 0; baud_std[i].baud && besterr; i++) {
+                if (baud_std[i].mr0 && !(s->flags & SCCNXP_HAVE_MR0))
+                        continue;
+                div_std = DIV_ROUND_CLOSEST(s->freq_std, baud_std[i].baud);
+                tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std);
+                if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) {
+                        acr = baud_std[i].acr;
+                        csr = baud_std[i].csr;
+                        mr0 = baud_std[i].mr0;
+                        bestbaud = tmp_baud;
+                }
+        }
+
+        if (s->flags & SCCNXP_HAVE_MR0) {
+                /* Enable FIFO, set half level for TX */
+                mr0 |= MR0_FIFO | MR0_TXLVL;
+                /* Update MR0 */
+                sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0);
+                sccnxp_port_write(port, SCCNXP_MR_REG, mr0);
+        }
+
+        sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE);
+        sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr);
+
+        dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n",
+                baud, bestbaud);
+}
+
+static void sccnxp_enable_irq(struct uart_port *port, int mask)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        s->imr |= mask << (port->line * 4);
+        sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
+}
+
+static void sccnxp_disable_irq(struct uart_port *port, int mask)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        s->imr &= ~(mask << (port->line * 4));
+        sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
+}
+
+static void sccnxp_set_bit(struct uart_port *port, int sig, int state)
+{
+        u8 bitmask;
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) {
+                bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig);
+                if (state)
+                        sccnxp_write(port, SCCNXP_SOP_REG, bitmask);
+                else
+                        sccnxp_write(port, SCCNXP_ROP_REG, bitmask);
+        }
+}
+
+static void sccnxp_handle_rx(struct uart_port *port)
+{
+        u8 sr;
+        unsigned int ch, flag;
+        struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+        if (!tty)
+                return;
+
+        for (;;) {
+                sr = sccnxp_port_read(port, SCCNXP_SR_REG);
+                if (!(sr & SR_RXRDY))
+                        break;
+                sr &= SR_PE | SR_FE | SR_OVR | SR_BRK;
+
+                ch = sccnxp_port_read(port, SCCNXP_RHR_REG);
+
+                port->icount.rx++;
+                flag = TTY_NORMAL;
+
+                if (unlikely(sr)) {
+                        if (sr & SR_BRK) {
+                                port->icount.brk++;
+                                if (uart_handle_break(port))
+                                        continue;
+                        } else if (sr & SR_PE)
+                                port->icount.parity++;
+                        else if (sr & SR_FE)
+                                port->icount.frame++;
+                        else if (sr & SR_OVR)
+                                port->icount.overrun++;
+
+                        sr &= port->read_status_mask;
+                        if (sr & SR_BRK)
+                                flag = TTY_BREAK;
+                        else if (sr & SR_PE)
+                                flag = TTY_PARITY;
+                        else if (sr & SR_FE)
+                                flag = TTY_FRAME;
+                        else if (sr & SR_OVR)
+                                flag = TTY_OVERRUN;
+                }
+
+                if (uart_handle_sysrq_char(port, ch))
+                        continue;
+
+                if (sr & port->ignore_status_mask)
+                        continue;
+
+                uart_insert_char(port, sr, SR_OVR, ch, flag);
+        }
+
+        tty_flip_buffer_push(tty);
+
+        tty_kref_put(tty);
+}
+
+static void sccnxp_handle_tx(struct uart_port *port)
+{
+        u8 sr;
+        struct circ_buf *xmit = &port->state->xmit;
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        if (unlikely(port->x_char)) {
+                sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char);
+                port->icount.tx++;
+                port->x_char = 0;
+                return;
+        }
+
+        if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+                /* Disable TX if FIFO is empty */
+                if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) {
+                        sccnxp_disable_irq(port, IMR_TXRDY);
+
+                        /* Set direction to input */
+                        if (s->flags & SCCNXP_HAVE_IO)
+                                sccnxp_set_bit(port, DIR_OP, 0);
+                }
+                return;
+        }
+
+        while (!uart_circ_empty(xmit)) {
+                sr = sccnxp_port_read(port, SCCNXP_SR_REG);
+                if (!(sr & SR_TXRDY))
+                        break;
+
+                sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]);
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                port->icount.tx++;
+        }
+
+        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+                uart_write_wakeup(port);
+}
+
+static irqreturn_t sccnxp_ist(int irq, void *dev_id)
+{
+        int i;
+        u8 isr;
+        struct sccnxp_port *s = (struct sccnxp_port *)dev_id;
+
+        mutex_lock(&s->sccnxp_mutex);
+
+        for (;;) {
+                isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG);
+                isr &= s->imr;
+                if (!isr)
+                        break;
+
+                dev_dbg(s->port[0].dev, "IRQ status: 0x%02x\n", isr);
+
+                for (i = 0; i < s->uart.nr; i++) {
+                        if (isr & ISR_RXRDY(i))
+                                sccnxp_handle_rx(&s->port[i]);
+                        if (isr & ISR_TXRDY(i))
+                                sccnxp_handle_tx(&s->port[i]);
+                }
+        }
+
+        mutex_unlock(&s->sccnxp_mutex);
+
+        return IRQ_HANDLED;
+}
+
+static void sccnxp_start_tx(struct uart_port *port)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        mutex_lock(&s->sccnxp_mutex);
+
+        /* Set direction to output */
+        if (s->flags & SCCNXP_HAVE_IO)
+                sccnxp_set_bit(port, DIR_OP, 1);
+
+        sccnxp_enable_irq(port, IMR_TXRDY);
+
+        mutex_unlock(&s->sccnxp_mutex);
+}
+
+static void sccnxp_stop_tx(struct uart_port *port)
+{
+        /* Do nothing */
+}
+
+static void sccnxp_stop_rx(struct uart_port *port)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        mutex_lock(&s->sccnxp_mutex);
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE);
+        mutex_unlock(&s->sccnxp_mutex);
+}
+
+static unsigned int sccnxp_tx_empty(struct uart_port *port)
+{
+        u8 val;
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        mutex_lock(&s->sccnxp_mutex);
+        val = sccnxp_port_read(port, SCCNXP_SR_REG);
+        mutex_unlock(&s->sccnxp_mutex);
+
+        return (val & SR_TXEMT) ? TIOCSER_TEMT : 0;
+}
+
+static void sccnxp_enable_ms(struct uart_port *port)
+{
+        /* Do nothing */
+}
+
+static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        if (!(s->flags & SCCNXP_HAVE_IO))
+                return;
+
+        mutex_lock(&s->sccnxp_mutex);
+
+        sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR);
+        sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS);
+
+        mutex_unlock(&s->sccnxp_mutex);
+}
+
+static unsigned int sccnxp_get_mctrl(struct uart_port *port)
+{
+        u8 bitmask, ipr;
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+        unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
+
+        if (!(s->flags & SCCNXP_HAVE_IO))
+                return mctrl;
+
+        mutex_lock(&s->sccnxp_mutex);
+
+        ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG);
+
+        if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) {
+                bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+                                          DSR_IP);
+                mctrl &= ~TIOCM_DSR;
+                mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0;
+        }
+        if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) {
+                bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+                                          CTS_IP);
+                mctrl &= ~TIOCM_CTS;
+                mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0;
+        }
+        if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) {
+                bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+                                          DCD_IP);
+                mctrl &= ~TIOCM_CAR;
+                mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0;
+        }
+        if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) {
+                bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+                                          RNG_IP);
+                mctrl &= ~TIOCM_RNG;
+                mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0;
+        }
+
+        mutex_unlock(&s->sccnxp_mutex);
+
+        return mctrl;
+}
+
+static void sccnxp_break_ctl(struct uart_port *port, int break_state)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        mutex_lock(&s->sccnxp_mutex);
+        sccnxp_port_write(port, SCCNXP_CR_REG, break_state ?
+                          CR_CMD_START_BREAK : CR_CMD_STOP_BREAK);
+        mutex_unlock(&s->sccnxp_mutex);
+}
+
+static void sccnxp_set_termios(struct uart_port *port,
+                               struct ktermios *termios, struct ktermios *old)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+        u8 mr1, mr2;
+        int baud;
+
+        mutex_lock(&s->sccnxp_mutex);
+
+        /* Mask termios capabilities we don't support */
+        termios->c_cflag &= ~CMSPAR;
+        termios->c_iflag &= ~(IXON | IXOFF | IXANY);
+
+        /* Disable RX & TX, reset break condition, status and FIFOs */
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET |
+                                               CR_RX_DISABLE | CR_TX_DISABLE);
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
+
+        /* Word size */
+        switch (termios->c_cflag & CSIZE) {
+        case CS5:
+                mr1 = MR1_BITS_5;
+                break;
+        case CS6:
+                mr1 = MR1_BITS_6;
+                break;
+        case CS7:
+                mr1 = MR1_BITS_7;
+                break;
+        default:
+        case CS8:
+                mr1 = MR1_BITS_8;
+                break;
+        }
+
+        /* Parity */
+        if (termios->c_cflag & PARENB) {
+                if (termios->c_cflag & PARODD)
+                        mr1 |= MR1_PAR_ODD;
+        } else
+                mr1 |= MR1_PAR_NO;
+
+        /* Stop bits */
+        mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1;
+
+        /* Update desired format */
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1);
+        sccnxp_port_write(port, SCCNXP_MR_REG, mr1);
+        sccnxp_port_write(port, SCCNXP_MR_REG, mr2);
+
+        /* Set read status mask */
+        port->read_status_mask = SR_OVR;
+        if (termios->c_iflag & INPCK)
+                port->read_status_mask |= SR_PE | SR_FE;
+        if (termios->c_iflag & (BRKINT | PARMRK))
+                port->read_status_mask |= SR_BRK;
+
+        /* Set status ignore mask */
+        port->ignore_status_mask = 0;
+        if (termios->c_iflag & IGNBRK)
+                port->ignore_status_mask |= SR_BRK;
+        if (!(termios->c_cflag & CREAD))
+                port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
+
+        /* Setup baudrate */
+        baud = uart_get_baud_rate(port, termios, old, 50,
+                                  (s->flags & SCCNXP_HAVE_MR0) ?
+                                  230400 : 38400);
+        sccnxp_set_baud(port, baud);
+
+        /* Update timeout according to new baud rate */
+        uart_update_timeout(port, termios->c_cflag, baud);
+
+        /* Enable RX & TX */
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
+
+        mutex_unlock(&s->sccnxp_mutex);
+}
+
+static int sccnxp_startup(struct uart_port *port)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        mutex_lock(&s->sccnxp_mutex);
+
+        if (s->flags & SCCNXP_HAVE_IO) {
+                /* Outputs are controlled manually */
+                sccnxp_write(port, SCCNXP_OPCR_REG, 0);
+        }
+
+        /* Reset break condition, status and FIFOs */
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET);
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
+
+        /* Enable RX & TX */
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
+
+        /* Enable RX interrupt */
+        sccnxp_enable_irq(port, IMR_RXRDY);
+
+        mutex_unlock(&s->sccnxp_mutex);
+
+        return 0;
+}
+
+static void sccnxp_shutdown(struct uart_port *port)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        mutex_lock(&s->sccnxp_mutex);
+
+        /* Disable interrupts */
+        sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
+
+        /* Disable TX & RX */
+        sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE);
+
+        /* Leave direction to input */
+        if (s->flags & SCCNXP_HAVE_IO)
+                sccnxp_set_bit(port, DIR_OP, 0);
+
+        mutex_unlock(&s->sccnxp_mutex);
+}
+
+static const char *sccnxp_type(struct uart_port *port)
+{
+        struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+        return (port->type == PORT_SC26XX) ? s->name : NULL;
+}
+
+static void sccnxp_release_port(struct uart_port *port)
+{
+        /* Do nothing */
+}
+
+static int sccnxp_request_port(struct uart_port *port)
+{
+        /* Do nothing */
+        return 0;
+}
+
+static void sccnxp_config_port(struct uart_port *port, int flags)
+{
+        if (flags & UART_CONFIG_TYPE)
+                port->type = PORT_SC26XX;
+}
+
+static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s)
+{
+        if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX))
+                return 0;
+        if (s->irq == port->irq)
+                return 0;
+
+        return -EINVAL;
+}
+
+static const struct uart_ops sccnxp_ops = {
+        .tx_empty       = sccnxp_tx_empty,
+        .set_mctrl      = sccnxp_set_mctrl,
+        .get_mctrl      = sccnxp_get_mctrl,
+        .stop_tx        = sccnxp_stop_tx,
+        .start_tx       = sccnxp_start_tx,
+        .stop_rx        = sccnxp_stop_rx,
+        .enable_ms      = sccnxp_enable_ms,
+        .break_ctl      = sccnxp_break_ctl,
+        .startup        = sccnxp_startup,
+        .shutdown       = sccnxp_shutdown,
+        .set_termios    = sccnxp_set_termios,
+        .type           = sccnxp_type,
+        .release_port   = sccnxp_release_port,
+        .request_port   = sccnxp_request_port,
+        .config_port    = sccnxp_config_port,
+        .verify_port    = sccnxp_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+static void sccnxp_console_putchar(struct uart_port *port, int c)
+{
+        int tryes = 100000;
+
+        while (tryes--) {
+                if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) {
+                        sccnxp_port_write(port, SCCNXP_THR_REG, c);
+                        break;
+                }
+                barrier();
+        }
+}
+
+static void sccnxp_console_write(struct console *co, const char *c, unsigned n)
+{
+        struct sccnxp_port *s = (struct sccnxp_port *)co->data;
+        struct uart_port *port = &s->port[co->index];
+
+        mutex_lock(&s->sccnxp_mutex);
+        uart_console_write(port, c, n, sccnxp_console_putchar);
+        mutex_unlock(&s->sccnxp_mutex);
+}
+
+static int sccnxp_console_setup(struct console *co, char *options)
+{
+        struct sccnxp_port *s = (struct sccnxp_port *)co->data;
+        struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
+        int baud = 9600, bits = 8, parity = 'n', flow = 'n';
+
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+        return uart_set_options(port, co, baud, parity, bits, flow);
+}
+#endif
+
+static int __devinit sccnxp_probe(struct platform_device *pdev)
+{
+        struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        int chiptype = pdev->id_entry->driver_data;
+        struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev);
+        int i, ret, fifosize, freq_min, freq_max;
+        struct sccnxp_port *s;
+        void __iomem *membase;
+
+        if (!res) {
+                dev_err(&pdev->dev, "Missing memory resource data\n");
+                return -EADDRNOTAVAIL;
+        }
+
+        dev_set_name(&pdev->dev, SCCNXP_NAME);
+
+        s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL);
+        if (!s) {
+                dev_err(&pdev->dev, "Error allocating port structure\n");
+                return -ENOMEM;
+        }
+        platform_set_drvdata(pdev, s);
+
+        mutex_init(&s->sccnxp_mutex);
+
+        /* Individual chip settings */
+        switch (chiptype) {
+        case SCCNXP_TYPE_SC2681:
+                s->name         = "SC2681";
+                s->uart.nr      = 2;
+                s->freq_std     = 3686400;
+                s->addr_mask    = 0x0f;
+                s->flags        = SCCNXP_HAVE_IO;
+                fifosize        = 3;
+                freq_min        = 1000000;
+                freq_max        = 4000000;
+                break;
+        case SCCNXP_TYPE_SC2691:
+                s->name         = "SC2691";
+                s->uart.nr      = 1;
+                s->freq_std     = 3686400;
+                s->addr_mask    = 0x07;
+                s->flags        = 0;
+                fifosize        = 3;
+                freq_min        = 1000000;
+                freq_max        = 4000000;
+                break;
+        case SCCNXP_TYPE_SC2692:
+                s->name         = "SC2692";
+                s->uart.nr      = 2;
+                s->freq_std     = 3686400;
+                s->addr_mask    = 0x0f;
+                s->flags        = SCCNXP_HAVE_IO;
+                fifosize        = 3;
+                freq_min        = 1000000;
+                freq_max        = 4000000;
+                break;
+        case SCCNXP_TYPE_SC2891:
+                s->name         = "SC2891";
+                s->uart.nr      = 1;
+                s->freq_std     = 3686400;
+                s->addr_mask    = 0x0f;
+                s->flags        = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+                fifosize        = 16;
+                freq_min        = 100000;
+                freq_max        = 8000000;
+                break;
+        case SCCNXP_TYPE_SC2892:
+                s->name         = "SC2892";
+                s->uart.nr      = 2;
+                s->freq_std     = 3686400;
+                s->addr_mask    = 0x0f;
+                s->flags        = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+                fifosize        = 16;
+                freq_min        = 100000;
+                freq_max        = 8000000;
+                break;
+        case SCCNXP_TYPE_SC28202:
+                s->name         = "SC28202";
+                s->uart.nr      = 2;
+                s->freq_std     = 14745600;
+                s->addr_mask    = 0x7f;
+                s->flags        = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+                fifosize        = 256;
+                freq_min        = 1000000;
+                freq_max        = 50000000;
+                break;
+        case SCCNXP_TYPE_SC68681:
+                s->name         = "SC68681";
+                s->uart.nr      = 2;
+                s->freq_std     = 3686400;
+                s->addr_mask    = 0x0f;
+                s->flags        = SCCNXP_HAVE_IO;
+                fifosize        = 3;
+                freq_min        = 1000000;
+                freq_max        = 4000000;
+                break;
+        case SCCNXP_TYPE_SC68692:
+                s->name         = "SC68692";
+                s->uart.nr      = 2;
+                s->freq_std     = 3686400;
+                s->addr_mask    = 0x0f;
+                s->flags        = SCCNXP_HAVE_IO;
+                fifosize        = 3;
+                freq_min        = 1000000;
+                freq_max        = 4000000;
+                break;
+        default:
+                dev_err(&pdev->dev, "Unsupported chip type %i\n", chiptype);
+                ret = -ENOTSUPP;
+                goto err_out;
+        }
+
+        if (!pdata) {
+                dev_warn(&pdev->dev,
+                         "No platform data supplied, using defaults\n");
+                s->pdata.frequency = s->freq_std;
+        } else
+                memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata));
+
+        s->irq = platform_get_irq(pdev, 0);
+        if (s->irq <= 0) {
+                dev_err(&pdev->dev, "Missing irq resource data\n");
+                ret = -ENXIO;
+                goto err_out;
+        }
+
+        /* Check input frequency */
+        if ((s->pdata.frequency < freq_min) ||
+            (s->pdata.frequency > freq_max)) {
+                dev_err(&pdev->dev, "Frequency out of bounds\n");
+                ret = -EINVAL;
+                goto err_out;
+        }
+
+        membase = devm_request_and_ioremap(&pdev->dev, res);
+        if (!membase) {
+                dev_err(&pdev->dev, "Failed to ioremap\n");
+                ret = -EIO;
+                goto err_out;
+        }
+
+        s->uart.owner           = THIS_MODULE;
+        s->uart.dev_name        = "ttySC";
+        s->uart.major           = SCCNXP_MAJOR;
+        s->uart.minor           = SCCNXP_MINOR;
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+        s->uart.cons            = &s->console;
+        s->uart.cons->device    = uart_console_device;
+        s->uart.cons->write     = sccnxp_console_write;
+        s->uart.cons->setup     = sccnxp_console_setup;
+        s->uart.cons->flags     = CON_PRINTBUFFER;
+        s->uart.cons->index     = -1;
+        s->uart.cons->data      = s;
+        strcpy(s->uart.cons->name, "ttySC");
+#endif
+        ret = uart_register_driver(&s->uart);
+        if (ret) {
+                dev_err(&pdev->dev, "Registering UART driver failed\n");
+                goto err_out;
+        }
+
+        for (i = 0; i < s->uart.nr; i++) {
+                s->port[i].line         = i;
+                s->port[i].dev          = &pdev->dev;
+                s->port[i].irq          = s->irq;
+                s->port[i].type         = PORT_SC26XX;
+                s->port[i].fifosize     = fifosize;
+                s->port[i].flags        = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+                s->port[i].iotype       = UPIO_MEM;
+                s->port[i].mapbase      = res->start;
+                s->port[i].membase      = membase;
+                s->port[i].regshift     = s->pdata.reg_shift;
+                s->port[i].uartclk      = s->pdata.frequency;
+                s->port[i].ops          = &sccnxp_ops;
+                uart_add_one_port(&s->uart, &s->port[i]);
+                /* Set direction to input */
+                if (s->flags & SCCNXP_HAVE_IO)
+                        sccnxp_set_bit(&s->port[i], DIR_OP, 0);
+        }
+
+        /* Disable interrupts */
+        s->imr = 0;
+        sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0);
+
+        /* Board specific configure */
+        if (s->pdata.init)
+                s->pdata.init();
+
+        ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL, sccnxp_ist,
+                                        IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+                                        dev_name(&pdev->dev), s);
+        if (!ret)
+                return 0;
+
+        dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq);
+
+err_out:
+        platform_set_drvdata(pdev, NULL);
+
+        return ret;
+}
+
+static int __devexit sccnxp_remove(struct platform_device *pdev)
+{
+        int i;
+        struct sccnxp_port *s = platform_get_drvdata(pdev);
+
+        devm_free_irq(&pdev->dev, s->irq, s);
+
+        for (i = 0; i < s->uart.nr; i++)
+                uart_remove_one_port(&s->uart, &s->port[i]);
+
+        uart_unregister_driver(&s->uart);
+        platform_set_drvdata(pdev, NULL);
+
+        if (s->pdata.exit)
+                s->pdata.exit();
+
+        return 0;
+}
+
+static const struct platform_device_id sccnxp_id_table[] = {
+        { "sc2681",     SCCNXP_TYPE_SC2681 },
+        { "sc2691",     SCCNXP_TYPE_SC2691 },
+        { "sc2692",     SCCNXP_TYPE_SC2692 },
+        { "sc2891",     SCCNXP_TYPE_SC2891 },
+        { "sc2892",     SCCNXP_TYPE_SC2892 },
+        { "sc28202",    SCCNXP_TYPE_SC28202 },
+        { "sc68681",    SCCNXP_TYPE_SC68681 },
+        { "sc68692",    SCCNXP_TYPE_SC68692 },
+};
+MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
+
+static struct platform_driver sccnxp_uart_driver = {
+        .driver = {
+                .name   = SCCNXP_NAME,
+                .owner  = THIS_MODULE,
+        },
+        .probe          = sccnxp_probe,
+        .remove         = __devexit_p(sccnxp_remove),
+        .id_table       = sccnxp_id_table,
+};
+module_platform_driver(sccnxp_uart_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("SCCNXP serial driver");
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index a21dc8e3b7c0..046279ce3e8d 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -159,7 +159,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
         retval = uport->ops->startup(uport);
         if (retval == 0) {
                 if (uart_console(uport) && uport->cons->cflag) {
-                        tty->termios->c_cflag = uport->cons->cflag;
+                        tty->termios.c_cflag = uport->cons->cflag;
                         uport->cons->cflag = 0;
                 }
                 /*
@@ -172,11 +172,11 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
                          * Setup the RTS and DTR signals once the
                          * port is open and ready to respond.
                          */
-                        if (tty->termios->c_cflag & CBAUD)
+                        if (tty->termios.c_cflag & CBAUD)
                                 uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
                 }
 
-                if (port->flags & ASYNC_CTS_FLOW) {
+                if (tty_port_cts_enabled(port)) {
                         spin_lock_irq(&uport->lock);
                         if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
                                 tty->hw_stopped = 1;
@@ -240,7 +240,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
                 /*
                  * Turn off DTR and RTS early.
                  */
-                if (!tty || (tty->termios->c_cflag & HUPCL))
+                if (!tty || (tty->termios.c_cflag & HUPCL))
                         uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
                 uart_port_shutdown(port);
@@ -440,10 +440,10 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
          * If we have no tty, termios, or the port does not exist,
          * then we can't set the parameters for this port.
          */
-        if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
+        if (!tty || uport->type == PORT_UNKNOWN)
                 return;
 
-        termios = tty->termios;
+        termios = &tty->termios;
 
         /*
          * Set flags based on termios cflag
@@ -614,7 +614,7 @@ static void uart_throttle(struct tty_struct *tty)
         if (I_IXOFF(tty))
                 uart_send_xchar(tty, STOP_CHAR(tty));
 
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 uart_clear_mctrl(state->uart_port, TIOCM_RTS);
 }
 
@@ -630,42 +630,48 @@ static void uart_unthrottle(struct tty_struct *tty)
                         uart_send_xchar(tty, START_CHAR(tty));
         }
 
-        if (tty->termios->c_cflag & CRTSCTS)
+        if (tty->termios.c_cflag & CRTSCTS)
                 uart_set_mctrl(port, TIOCM_RTS);
 }
 
-static int uart_get_info(struct uart_state *state,
-                         struct serial_struct __user *retinfo)
+static void uart_get_info(struct tty_port *port,
+                        struct uart_state *state,
+                        struct serial_struct *retinfo)
 {
         struct uart_port *uport = state->uart_port;
-        struct tty_port *port = &state->port;
-        struct serial_struct tmp;
-
-        memset(&tmp, 0, sizeof(tmp));
 
-        /* Ensure the state we copy is consistent and no hardware changes
-           occur as we go */
-        mutex_lock(&port->mutex);
+        memset(retinfo, 0, sizeof(*retinfo));
 
-        tmp.type            = uport->type;
-        tmp.line            = uport->line;
-        tmp.port            = uport->iobase;
+        retinfo->type       = uport->type;
+        retinfo->line       = uport->line;
+        retinfo->port       = uport->iobase;
         if (HIGH_BITS_OFFSET)
-                tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
-        tmp.irq             = uport->irq;
-        tmp.flags           = uport->flags;
-        tmp.xmit_fifo_size  = uport->fifosize;
-        tmp.baud_base       = uport->uartclk / 16;
-        tmp.close_delay     = jiffies_to_msecs(port->close_delay) / 10;
-        tmp.closing_wait    = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+                retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+        retinfo->irq                = uport->irq;
+        retinfo->flags      = uport->flags;
+        retinfo->xmit_fifo_size  = uport->fifosize;
+        retinfo->baud_base          = uport->uartclk / 16;
+        retinfo->close_delay        = jiffies_to_msecs(port->close_delay) / 10;
+        retinfo->closing_wait    = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
                                 ASYNC_CLOSING_WAIT_NONE :
                                 jiffies_to_msecs(port->closing_wait) / 10;
-        tmp.custom_divisor  = uport->custom_divisor;
-        tmp.hub6            = uport->hub6;
-        tmp.io_type         = uport->iotype;
-        tmp.iomem_reg_shift = uport->regshift;
-        tmp.iomem_base      = (void *)(unsigned long)uport->mapbase;
+        retinfo->custom_divisor  = uport->custom_divisor;
+        retinfo->hub6       = uport->hub6;
+        retinfo->io_type         = uport->iotype;
+        retinfo->iomem_reg_shift = uport->regshift;
+        retinfo->iomem_base      = (void *)(unsigned long)uport->mapbase;
+}
 
+static int uart_get_info_user(struct uart_state *state,
+                         struct serial_struct __user *retinfo)
+{
+        struct tty_port *port = &state->port;
+        struct serial_struct tmp;
+
+        /* Ensure the state we copy is consistent and no hardware changes
+           occur as we go */
+        mutex_lock(&port->mutex);
+        uart_get_info(port, state, &tmp);
         mutex_unlock(&port->mutex);
 
         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
@@ -673,42 +679,30 @@ static int uart_get_info(struct uart_state *state,
         return 0;
 }
 
-static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
-                         struct serial_struct __user *newinfo)
+static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
+                         struct uart_state *state,
+                         struct serial_struct *new_info)
 {
-        struct serial_struct new_serial;
         struct uart_port *uport = state->uart_port;
-        struct tty_port *port = &state->port;
         unsigned long new_port;
         unsigned int change_irq, change_port, closing_wait;
         unsigned int old_custom_divisor, close_delay;
         upf_t old_flags, new_flags;
         int retval = 0;
 
-        if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
-                return -EFAULT;
-
-        new_port = new_serial.port;
+        new_port = new_info->port;
         if (HIGH_BITS_OFFSET)
-                new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
+                new_port += (unsigned long) new_info->port_high << HIGH_BITS_OFFSET;
 
-        new_serial.irq = irq_canonicalize(new_serial.irq);
-        close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
-        closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+        new_info->irq = irq_canonicalize(new_info->irq);
+        close_delay = msecs_to_jiffies(new_info->close_delay * 10);
+        closing_wait = new_info->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
                         ASYNC_CLOSING_WAIT_NONE :
-                        msecs_to_jiffies(new_serial.closing_wait * 10);
+                        msecs_to_jiffies(new_info->closing_wait * 10);
 
-        /*
-         * This semaphore protects port->count.  It is also
-         * very useful to prevent opens.  Also, take the
-         * port configuration semaphore to make sure that a
-         * module insertion/removal doesn't change anything
-         * under us.
-         */
-        mutex_lock(&port->mutex);
 
         change_irq  = !(uport->flags & UPF_FIXED_PORT)
-                && new_serial.irq != uport->irq;
+                && new_info->irq != uport->irq;
 
         /*
          * Since changing the 'type' of the port changes its resource
@@ -717,29 +711,29 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
          */
         change_port = !(uport->flags & UPF_FIXED_PORT)
                 && (new_port != uport->iobase ||
-                    (unsigned long)new_serial.iomem_base != uport->mapbase ||
-                    new_serial.hub6 != uport->hub6 ||
-                    new_serial.io_type != uport->iotype ||
-                    new_serial.iomem_reg_shift != uport->regshift ||
-                    new_serial.type != uport->type);
+                    (unsigned long)new_info->iomem_base != uport->mapbase ||
+                    new_info->hub6 != uport->hub6 ||
+                    new_info->io_type != uport->iotype ||
+                    new_info->iomem_reg_shift != uport->regshift ||
+                    new_info->type != uport->type);
 
         old_flags = uport->flags;
-        new_flags = new_serial.flags;
+        new_flags = new_info->flags;
         old_custom_divisor = uport->custom_divisor;
 
         if (!capable(CAP_SYS_ADMIN)) {
                 retval = -EPERM;
                 if (change_irq || change_port ||
-                    (new_serial.baud_base != uport->uartclk / 16) ||
+                    (new_info->baud_base != uport->uartclk / 16) ||
                     (close_delay != port->close_delay) ||
                     (closing_wait != port->closing_wait) ||
-                    (new_serial.xmit_fifo_size &&
-                     new_serial.xmit_fifo_size != uport->fifosize) ||
+                    (new_info->xmit_fifo_size &&
+                     new_info->xmit_fifo_size != uport->fifosize) ||
                     (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
                         goto exit;
                 uport->flags = ((uport->flags & ~UPF_USR_MASK) |
                                (new_flags & UPF_USR_MASK));
-                uport->custom_divisor = new_serial.custom_divisor;
+                uport->custom_divisor = new_info->custom_divisor;
                 goto check_and_exit;
         }
 
@@ -747,10 +741,10 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
          * Ask the low level driver to verify the settings.
          */
         if (uport->ops->verify_port)
-                retval = uport->ops->verify_port(uport, &new_serial);
+                retval = uport->ops->verify_port(uport, new_info);
 
-        if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
-            (new_serial.baud_base < 9600))
+        if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) ||
+            (new_info->baud_base < 9600))
                 retval = -EINVAL;
 
         if (retval)
@@ -790,11 +784,11 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
                         uport->ops->release_port(uport);
 
                 uport->iobase = new_port;
-                uport->type = new_serial.type;
-                uport->hub6 = new_serial.hub6;
-                uport->iotype = new_serial.io_type;
-                uport->regshift = new_serial.iomem_reg_shift;
-                uport->mapbase = (unsigned long)new_serial.iomem_base;
+                uport->type = new_info->type;
+                uport->hub6 = new_info->hub6;
+                uport->iotype = new_info->io_type;
+                uport->regshift = new_info->iomem_reg_shift;
+                uport->mapbase = (unsigned long)new_info->iomem_base;
 
                 /*
                  * Claim and map the new regions
@@ -835,16 +829,16 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
         }
 
         if (change_irq)
-                uport->irq      = new_serial.irq;
+                uport->irq      = new_info->irq;
         if (!(uport->flags & UPF_FIXED_PORT))
-                uport->uartclk  = new_serial.baud_base * 16;
+                uport->uartclk  = new_info->baud_base * 16;
         uport->flags            = (uport->flags & ~UPF_CHANGE_MASK) |
                                  (new_flags & UPF_CHANGE_MASK);
-        uport->custom_divisor   = new_serial.custom_divisor;
+        uport->custom_divisor   = new_info->custom_divisor;
         port->close_delay     = close_delay;
         port->closing_wait    = closing_wait;
-        if (new_serial.xmit_fifo_size)
-                uport->fifosize = new_serial.xmit_fifo_size;
+        if (new_info->xmit_fifo_size)
+                uport->fifosize = new_info->xmit_fifo_size;
         if (port->tty)
                 port->tty->low_latency =
                         (uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
@@ -873,6 +867,28 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
         } else
                 retval = uart_startup(tty, state, 1);
  exit:
+        return retval;
+}
+
+static int uart_set_info_user(struct tty_struct *tty, struct uart_state *state,
+                         struct serial_struct __user *newinfo)
+{
+        struct serial_struct new_serial;
+        struct tty_port *port = &state->port;
+        int retval;
+
+        if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+                return -EFAULT;
+
+        /*
+         * This semaphore protects port->count.  It is also
+         * very useful to prevent opens.  Also, take the
+         * port configuration semaphore to make sure that a
+         * module insertion/removal doesn't change anything
+         * under us.
+         */
+        mutex_lock(&port->mutex);
+        retval = uart_set_info(tty, port, state, &new_serial);
         mutex_unlock(&port->mutex);
         return retval;
 }
@@ -1115,11 +1131,11 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd,
          */
         switch (cmd) {
         case TIOCGSERIAL:
-                ret = uart_get_info(state, uarg);
+                ret = uart_get_info_user(state, uarg);
                 break;
 
         case TIOCSSERIAL:
-                ret = uart_set_info(tty, state, uarg);
+                ret = uart_set_info_user(tty, state, uarg);
                 break;
 
         case TIOCSERCONFIG:
@@ -1187,7 +1203,7 @@ static void uart_set_ldisc(struct tty_struct *tty)
         struct uart_port *uport = state->uart_port;
 
         if (uport->ops->set_ldisc)
-                uport->ops->set_ldisc(uport, tty->termios->c_line);
+                uport->ops->set_ldisc(uport, tty->termios.c_line);
 }
 
 static void uart_set_termios(struct tty_struct *tty,
@@ -1195,7 +1211,7 @@ static void uart_set_termios(struct tty_struct *tty,
 {
         struct uart_state *state = tty->driver_data;
         unsigned long flags;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
 
 
         /*
@@ -1206,9 +1222,9 @@ static void uart_set_termios(struct tty_struct *tty,
          */
 #define RELEVANT_IFLAG(iflag)   ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
         if ((cflag ^ old_termios->c_cflag) == 0 &&
-            tty->termios->c_ospeed == old_termios->c_ospeed &&
-            tty->termios->c_ispeed == old_termios->c_ispeed &&
-            RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) {
+            tty->termios.c_ospeed == old_termios->c_ospeed &&
+            tty->termios.c_ispeed == old_termios->c_ispeed &&
+            RELEVANT_IFLAG(tty->termios.c_iflag ^ old_termios->c_iflag) == 0) {
                 return;
         }
 
@@ -1960,8 +1976,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
                 /*
                  * If that's unset, use the tty termios setting.
                  */
-                if (port->tty && port->tty->termios && termios.c_cflag == 0)
-                        termios = *(port->tty->termios);
+                if (port->tty && termios.c_cflag == 0)
+                        termios = port->tty->termios;
 
                 if (console_suspend_enabled)
                         uart_change_pm(state, 0);
@@ -2293,6 +2309,36 @@ struct tty_driver *uart_console_device(struct console *co, int *index)
         return p->tty_driver;
 }
 
+static ssize_t uart_get_attr_uartclk(struct device *dev,
+        struct device_attribute *attr, char *buf)
+{
+        int ret;
+        struct tty_port *port = dev_get_drvdata(dev);
+        struct uart_state *state = container_of(port, struct uart_state, port);
+
+        mutex_lock(&state->port.mutex);
+        ret = snprintf(buf, PAGE_SIZE, "%d\n", state->uart_port->uartclk);
+        mutex_unlock(&state->port.mutex);
+
+        return ret;
+}
+
+static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL);
+
+static struct attribute *tty_dev_attrs[] = {
+        &dev_attr_uartclk.attr,
+        NULL,
+        };
+
+static const struct attribute_group tty_dev_attr_group = {
+        .attrs = tty_dev_attrs,
+        };
+
+static const struct attribute_group *tty_dev_attr_groups[] = {
+        &tty_dev_attr_group,
+        NULL
+        };
+
 /**
  *      uart_add_one_port - attach a driver-defined port structure
  *      @drv: pointer to the uart low level driver structure for this port
@@ -2346,7 +2392,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
          * Register the port whether it's detected or not.  This allows
          * setserial to be used to alter this ports parameters.
          */
-        tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
+        tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
+                        uport->line, uport->dev, port, tty_dev_attr_groups);
         if (likely(!IS_ERR(tty_dev))) {
                 device_set_wakeup_capable(tty_dev, 1);
         } else {
@@ -2492,7 +2539,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 
         uport->icount.cts++;
 
-        if (port->flags & ASYNC_CTS_FLOW) {
+        if (tty_port_cts_enabled(port)) {
                 if (tty->hw_stopped) {
                         if (status) {
                                 tty->hw_stopped = 0;
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 5b3eda2024fe..a9e2bd1ab534 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -668,7 +668,7 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
         if (res == NULL) {
                 dev_err(&pdev->dev, "Insufficient resources.\n");
                 ret = -EFAULT;
-                goto irq_err;
+                goto err;
         }
         port->irq = res->start;
 
@@ -676,7 +676,7 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
                 sirfport->p = pinctrl_get_select_default(&pdev->dev);
                 ret = IS_ERR(sirfport->p);
                 if (ret)
-                        goto pin_err;
+                        goto err;
         }
 
         port->ops = &sirfsoc_uart_ops;
@@ -695,9 +695,6 @@ port_err:
         platform_set_drvdata(pdev, NULL);
         if (sirfport->hw_flow_ctrl)
                 pinctrl_put(sirfport->p);
-pin_err:
-irq_err:
-        devm_iounmap(&pdev->dev, port->membase);
 err:
         return ret;
 }
@@ -709,7 +706,6 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
         platform_set_drvdata(pdev, NULL);
         if (sirfport->hw_flow_ctrl)
                 pinctrl_put(sirfport->p);
-        devm_iounmap(&pdev->dev, port->membase);
         uart_remove_one_port(&sirfsoc_uart_drv, port);
         return 0;
 }
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 675303b8ed84..b97913dcdbff 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -58,10 +58,16 @@
 enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
 static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
 
+struct serial_uart_config {
+        char    *name;
+        int     dfl_xmit_fifo_size;
+        int     flags;
+};
+
 /*
  * Here we define the default xmit fifo size used for each type of UART.
  */
-static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
+static const struct serial_uart_config uart_config[] = {
         { "unknown",    1,      0 },
         { "8250",       1,      0 },
         { "16450",      1,      0 },
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 593d40ad0a6b..70e3a525bc82 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1359,7 +1359,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
                         }
                 }
         
-                if ( (info->port.flags & ASYNC_CTS_FLOW) && 
+                if (tty_port_cts_enabled(&info->port) &&
                      (status & MISCSTATUS_CTS_LATCHED) ) {
                         if (info->port.tty->hw_stopped) {
                                 if (status & MISCSTATUS_CTS) {
@@ -1840,22 +1840,22 @@ static void shutdown(struct mgsl_struct * info)
         usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
                 TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
         usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
-        
+
         /* Disable DMAEN (Port 7, Bit 14) */
         /* This disconnects the DMA request signal from the ISA bus */
         /* on the ISA adapter. This has no effect for the PCI adapter */
         usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
-        
+
         /* Disable INTEN (Port 6, Bit12) */
         /* This disconnects the IRQ request signal to the ISA bus */
         /* on the ISA adapter. This has no effect for the PCI adapter */
         usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
-        
-        if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+
+        if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
                 usc_set_serial_signals(info);
         }
-        
+
         spin_unlock_irqrestore(&info->irq_spinlock,flags);
 
         mgsl_release_resources(info);   
@@ -1895,7 +1895,7 @@ static void mgsl_program_hw(struct mgsl_struct *info)
         usc_EnableInterrupts(info, IO_PIN);
         usc_get_serial_signals(info);
                 
-        if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
+        if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
                 usc_start_receiver(info);
                 
         spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -1908,14 +1908,14 @@ static void mgsl_change_params(struct mgsl_struct *info)
         unsigned cflag;
         int bits_per_char;
 
-        if (!info->port.tty || !info->port.tty->termios)
+        if (!info->port.tty)
                 return;
                 
         if (debug_level >= DEBUG_LEVEL_INFO)
                 printk("%s(%d):mgsl_change_params(%s)\n",
                          __FILE__,__LINE__, info->device_name );
                          
-        cflag = info->port.tty->termios->c_cflag;
+        cflag = info->port.tty->termios.c_cflag;
 
         /* if B0 rate (hangup) specified then negate DTR and RTS */
         /* otherwise assert DTR and RTS */
@@ -2367,8 +2367,8 @@ static void mgsl_throttle(struct tty_struct * tty)
         
         if (I_IXOFF(tty))
                 mgsl_send_xchar(tty, STOP_CHAR(tty));
- 
-        if (tty->termios->c_cflag & CRTSCTS) {
+
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->irq_spinlock,flags);
                 info->serial_signals &= ~SerialSignal_RTS;
                 usc_set_serial_signals(info);
@@ -2401,8 +2401,8 @@ static void mgsl_unthrottle(struct tty_struct * tty)
                 else
                         mgsl_send_xchar(tty, START_CHAR(tty));
         }
-        
-        if (tty->termios->c_cflag & CRTSCTS) {
+
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->irq_spinlock,flags);
                 info->serial_signals |= SerialSignal_RTS;
                 usc_set_serial_signals(info);
@@ -3045,7 +3045,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
 
         /* Handle transition to B0 status */
         if (old_termios->c_cflag & CBAUD &&
-            !(tty->termios->c_cflag & CBAUD)) {
+            !(tty->termios.c_cflag & CBAUD)) {
                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
                 spin_lock_irqsave(&info->irq_spinlock,flags);
                 usc_set_serial_signals(info);
@@ -3054,9 +3054,9 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
         
         /* Handle transition away from B0 status */
         if (!(old_termios->c_cflag & CBAUD) &&
-            tty->termios->c_cflag & CBAUD) {
+            tty->termios.c_cflag & CBAUD) {
                 info->serial_signals |= SerialSignal_DTR;
-                if (!(tty->termios->c_cflag & CRTSCTS) || 
+                if (!(tty->termios.c_cflag & CRTSCTS) || 
                     !test_bit(TTY_THROTTLED, &tty->flags)) {
                         info->serial_signals |= SerialSignal_RTS;
                 }
@@ -3067,7 +3067,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
         
         /* Handle turning off CRTSCTS */
         if (old_termios->c_cflag & CRTSCTS &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 mgsl_start(tty);
         }
@@ -3287,7 +3287,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
                 return 0;
         }
 
-        if (tty->termios->c_cflag & CLOCAL)
+        if (tty->termios.c_cflag & CLOCAL)
                 do_clocal = true;
 
         /* Wait for carrier detect and the line to become
@@ -3313,7 +3313,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
         port->blocked_open++;
         
         while (1) {
-                if (tty->termios->c_cflag & CBAUD)
+                if (tty->termios.c_cflag & CBAUD)
                         tty_port_raise_dtr_rts(port);
                 
                 set_current_state(TASK_INTERRUPTIBLE);
@@ -3338,9 +3338,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
                         printk("%s(%d):block_til_ready blocking on %s count=%d\n",
                                  __FILE__,__LINE__, tty->driver->name, port->count );
                                  
-                tty_unlock();
+                tty_unlock(tty);
                 schedule();
-                tty_lock();
+                tty_lock(tty);
         }
         
         set_current_state(TASK_RUNNING);
@@ -3362,6 +3362,29 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
         
 }       /* end of block_til_ready() */
 
+static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+        struct mgsl_struct *info;
+        int line = tty->index;
+
+        /* verify range of specified line number */
+        if (line >= mgsl_device_count) {
+                printk("%s(%d):mgsl_open with invalid line #%d.\n",
+                        __FILE__, __LINE__, line);
+                return -ENODEV;
+        }
+
+        /* find the info structure for the specified line */
+        info = mgsl_device_list;
+        while (info && info->line != line)
+                info = info->next_device;
+        if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
+                return -ENODEV;
+        tty->driver_data = info;
+
+        return tty_port_install(&info->port, driver, tty);
+}
+
 /* mgsl_open()
  *
  *      Called when a port is opened.  Init and enable port.
@@ -3374,26 +3397,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
  */
 static int mgsl_open(struct tty_struct *tty, struct file * filp)
 {
-        struct mgsl_struct      *info;
-        int                     retval, line;
+        struct mgsl_struct *info = tty->driver_data;
         unsigned long flags;
+        int retval;
 
-        /* verify range of specified line number */     
-        line = tty->index;
-        if (line >= mgsl_device_count) {
-                printk("%s(%d):mgsl_open with invalid line #%d.\n",
-                        __FILE__,__LINE__,line);
-                return -ENODEV;
-        }
-
-        /* find the info structure for the specified line */
-        info = mgsl_device_list;
-        while(info && info->line != line)
-                info = info->next_device;
-        if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
-                return -ENODEV;
-        
-        tty->driver_data = info;
         info->port.tty = tty;
                 
         if (debug_level >= DEBUG_LEVEL_INFO)
@@ -4297,6 +4304,7 @@ static struct mgsl_struct* mgsl_allocate_device(void)
 }       /* end of mgsl_allocate_device()*/
 
 static const struct tty_operations mgsl_ops = {
+        .install = mgsl_install,
         .open = mgsl_open,
         .close = mgsl_close,
         .write = mgsl_write,
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index aa1debf97cc7..b38e954eedd3 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -785,7 +785,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle transition to B0 status */
         if (old_termios->c_cflag & CBAUD &&
-            !(tty->termios->c_cflag & CBAUD)) {
+            !(tty->termios.c_cflag & CBAUD)) {
                 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
                 spin_lock_irqsave(&info->lock,flags);
                 set_signals(info);
@@ -794,9 +794,9 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle transition away from B0 status */
         if (!(old_termios->c_cflag & CBAUD) &&
-            tty->termios->c_cflag & CBAUD) {
+            tty->termios.c_cflag & CBAUD) {
                 info->signals |= SerialSignal_DTR;
-                if (!(tty->termios->c_cflag & CRTSCTS) ||
+                if (!(tty->termios.c_cflag & CRTSCTS) ||
                     !test_bit(TTY_THROTTLED, &tty->flags)) {
                         info->signals |= SerialSignal_RTS;
                 }
@@ -807,7 +807,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle turning off CRTSCTS */
         if (old_termios->c_cflag & CRTSCTS &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 tx_release(tty);
         }
@@ -1372,7 +1372,7 @@ static void throttle(struct tty_struct * tty)
         DBGINFO(("%s throttle\n", info->device_name));
         if (I_IXOFF(tty))
                 send_xchar(tty, STOP_CHAR(tty));
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->lock,flags);
                 info->signals &= ~SerialSignal_RTS;
                 set_signals(info);
@@ -1397,7 +1397,7 @@ static void unthrottle(struct tty_struct * tty)
                 else
                         send_xchar(tty, START_CHAR(tty));
         }
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->lock,flags);
                 info->signals |= SerialSignal_RTS;
                 set_signals(info);
@@ -2053,7 +2053,7 @@ static void cts_change(struct slgt_info *info, unsigned short status)
         wake_up_interruptible(&info->event_wait_q);
         info->pending_bh |= BH_STATUS;
 
-        if (info->port.flags & ASYNC_CTS_FLOW) {
+        if (tty_port_cts_enabled(&info->port)) {
                 if (info->port.tty) {
                         if (info->port.tty->hw_stopped) {
                                 if (info->signals & SerialSignal_CTS) {
@@ -2493,7 +2493,7 @@ static void shutdown(struct slgt_info *info)
 
         slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
 
-        if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+        if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
                 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
                 set_signals(info);
         }
@@ -2534,7 +2534,7 @@ static void program_hw(struct slgt_info *info)
         get_signals(info);
 
         if (info->netcount ||
-            (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
+            (info->port.tty && info->port.tty->termios.c_cflag & CREAD))
                 rx_start(info);
 
         spin_unlock_irqrestore(&info->lock,flags);
@@ -2548,11 +2548,11 @@ static void change_params(struct slgt_info *info)
         unsigned cflag;
         int bits_per_char;
 
-        if (!info->port.tty || !info->port.tty->termios)
+        if (!info->port.tty)
                 return;
         DBGINFO(("%s change_params\n", info->device_name));
 
-        cflag = info->port.tty->termios->c_cflag;
+        cflag = info->port.tty->termios.c_cflag;
 
         /* if B0 rate (hangup) specified then negate DTR and RTS */
         /* otherwise assert DTR and RTS */
@@ -3292,7 +3292,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                 return 0;
         }
 
-        if (tty->termios->c_cflag & CLOCAL)
+        if (tty->termios.c_cflag & CLOCAL)
                 do_clocal = true;
 
         /* Wait for carrier detect and the line to become
@@ -3314,7 +3314,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         port->blocked_open++;
 
         while (1) {
-                if ((tty->termios->c_cflag & CBAUD))
+                if ((tty->termios.c_cflag & CBAUD))
                         tty_port_raise_dtr_rts(port);
 
                 set_current_state(TASK_INTERRUPTIBLE);
@@ -3336,9 +3336,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                 }
 
                 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
-                tty_unlock();
+                tty_unlock(tty);
                 schedule();
-                tty_lock();
+                tty_lock(tty);
         }
 
         set_current_state(TASK_RUNNING);
@@ -3689,8 +3689,11 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
                 }
         }
 
-        for (i=0; i < port_count; ++i)
-                tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
+        for (i = 0; i < port_count; ++i) {
+                struct slgt_info *info = port_array[i];
+                tty_port_register_device(&info->port, serial_driver, info->line,
+                                &info->pdev->dev);
+        }
 }
 
 static int __devinit init_one(struct pci_dev *dev,
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index a3dddc12d2fe..f17d9f3d84a2 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -711,15 +711,11 @@ static void ldisc_receive_buf(struct tty_struct *tty,
 
 /* tty callbacks */
 
-/* Called when a port is opened.  Init and enable port.
- */
-static int open(struct tty_struct *tty, struct file *filp)
+static int install(struct tty_driver *driver, struct tty_struct *tty)
 {
         SLMP_INFO *info;
-        int retval, line;
-        unsigned long flags;
+        int line = tty->index;
 
-        line = tty->index;
         if (line >= synclinkmp_device_count) {
                 printk("%s(%d): open with invalid line #%d.\n",
                         __FILE__,__LINE__,line);
@@ -727,17 +723,30 @@ static int open(struct tty_struct *tty, struct file *filp)
         }
 
         info = synclinkmp_device_list;
-        while(info && info->line != line)
+        while (info && info->line != line)
                 info = info->next_device;
         if (sanity_check(info, tty->name, "open"))
                 return -ENODEV;
-        if ( info->init_error ) {
+        if (info->init_error) {
                 printk("%s(%d):%s device is not allocated, init error=%d\n",
-                        __FILE__,__LINE__,info->device_name,info->init_error);
+                        __FILE__, __LINE__, info->device_name,
+                        info->init_error);
                 return -ENODEV;
         }
 
         tty->driver_data = info;
+
+        return tty_port_install(&info->port, driver, tty);
+}
+
+/* Called when a port is opened.  Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+        SLMP_INFO *info = tty->driver_data;
+        unsigned long flags;
+        int retval;
+
         info->port.tty = tty;
 
         if (debug_level >= DEBUG_LEVEL_INFO)
@@ -873,7 +882,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle transition to B0 status */
         if (old_termios->c_cflag & CBAUD &&
-            !(tty->termios->c_cflag & CBAUD)) {
+            !(tty->termios.c_cflag & CBAUD)) {
                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
                 spin_lock_irqsave(&info->lock,flags);
                 set_signals(info);
@@ -882,9 +891,9 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle transition away from B0 status */
         if (!(old_termios->c_cflag & CBAUD) &&
-            tty->termios->c_cflag & CBAUD) {
+            tty->termios.c_cflag & CBAUD) {
                 info->serial_signals |= SerialSignal_DTR;
-                if (!(tty->termios->c_cflag & CRTSCTS) ||
+                if (!(tty->termios.c_cflag & CRTSCTS) ||
                     !test_bit(TTY_THROTTLED, &tty->flags)) {
                         info->serial_signals |= SerialSignal_RTS;
                 }
@@ -895,7 +904,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
         /* Handle turning off CRTSCTS */
         if (old_termios->c_cflag & CRTSCTS &&
-            !(tty->termios->c_cflag & CRTSCTS)) {
+            !(tty->termios.c_cflag & CRTSCTS)) {
                 tty->hw_stopped = 0;
                 tx_release(tty);
         }
@@ -1473,7 +1482,7 @@ static void throttle(struct tty_struct * tty)
         if (I_IXOFF(tty))
                 send_xchar(tty, STOP_CHAR(tty));
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->lock,flags);
                 info->serial_signals &= ~SerialSignal_RTS;
                 set_signals(info);
@@ -1502,7 +1511,7 @@ static void unthrottle(struct tty_struct * tty)
                         send_xchar(tty, START_CHAR(tty));
         }
 
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 spin_lock_irqsave(&info->lock,flags);
                 info->serial_signals |= SerialSignal_RTS;
                 set_signals(info);
@@ -2491,7 +2500,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
                         }
                 }
 
-                if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+                if (tty_port_cts_enabled(&info->port) &&
                      (status & MISCSTATUS_CTS_LATCHED) ) {
                         if ( info->port.tty ) {
                                 if (info->port.tty->hw_stopped) {
@@ -2708,7 +2717,7 @@ static void shutdown(SLMP_INFO * info)
 
         reset_port(info);
 
-        if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+        if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
                 set_signals(info);
         }
@@ -2749,7 +2758,7 @@ static void program_hw(SLMP_INFO *info)
 
         get_signals(info);
 
-        if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
+        if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
                 rx_start(info);
 
         spin_unlock_irqrestore(&info->lock,flags);
@@ -2762,14 +2771,14 @@ static void change_params(SLMP_INFO *info)
         unsigned cflag;
         int bits_per_char;
 
-        if (!info->port.tty || !info->port.tty->termios)
+        if (!info->port.tty)
                 return;
 
         if (debug_level >= DEBUG_LEVEL_INFO)
                 printk("%s(%d):%s change_params()\n",
                          __FILE__,__LINE__, info->device_name );
 
-        cflag = info->port.tty->termios->c_cflag;
+        cflag = info->port.tty->termios.c_cflag;
 
         /* if B0 rate (hangup) specified then negate DTR and RTS */
         /* otherwise assert DTR and RTS */
@@ -3306,7 +3315,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                 return 0;
         }
 
-        if (tty->termios->c_cflag & CLOCAL)
+        if (tty->termios.c_cflag & CLOCAL)
                 do_clocal = true;
 
         /* Wait for carrier detect and the line to become
@@ -3332,7 +3341,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         port->blocked_open++;
 
         while (1) {
-                if (tty->termios->c_cflag & CBAUD)
+                if (tty->termios.c_cflag & CBAUD)
                         tty_port_raise_dtr_rts(port);
 
                 set_current_state(TASK_INTERRUPTIBLE);
@@ -3357,9 +3366,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                         printk("%s(%d):%s block_til_ready() count=%d\n",
                                  __FILE__,__LINE__, tty->driver->name, port->count );
 
-                tty_unlock();
+                tty_unlock(tty);
                 schedule();
-                tty_lock();
+                tty_lock(tty);
         }
 
         set_current_state(TASK_RUNNING);
@@ -3881,6 +3890,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
 }
 
 static const struct tty_operations ops = {
+        .install = install,
         .open = open,
         .close = close,
         .write = write,
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index b425c79675ad..8a5a8b064616 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -181,10 +181,13 @@ struct tty_struct *alloc_tty_struct(void)
 
 void free_tty_struct(struct tty_struct *tty)
 {
+        if (!tty)
+                return;
         if (tty->dev)
                 put_device(tty->dev);
         kfree(tty->write_buf);
         tty_buffer_free_all(tty);
+        tty->magic = 0xDEADDEAD;
         kfree(tty);
 }
 
@@ -573,7 +576,7 @@ void __tty_hangup(struct tty_struct *tty)
         }
         spin_unlock(&redirect_lock);
 
-        tty_lock();
+        tty_lock(tty);
 
         /* some functions below drop BTM, so we need this bit */
         set_bit(TTY_HUPPING, &tty->flags);
@@ -666,7 +669,7 @@ void __tty_hangup(struct tty_struct *tty)
         clear_bit(TTY_HUPPING, &tty->flags);
         tty_ldisc_enable(tty);
 
-        tty_unlock();
+        tty_unlock(tty);
 
         if (f)
                 fput(f);
@@ -1103,12 +1106,12 @@ void tty_write_message(struct tty_struct *tty, char *msg)
 {
         if (tty) {
                 mutex_lock(&tty->atomic_write_lock);
-                tty_lock();
+                tty_lock(tty);
                 if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
-                        tty_unlock();
+                        tty_unlock(tty);
                         tty->ops->write(tty, msg, strlen(msg));
                 } else
-                        tty_unlock();
+                        tty_unlock(tty);
                 tty_write_unlock(tty);
         }
         return;
@@ -1213,7 +1216,10 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p)
  */
 static void tty_line_name(struct tty_driver *driver, int index, char *p)
 {
-        sprintf(p, "%s%d", driver->name, index + driver->name_base);
+        if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
+                strcpy(p, driver->name);
+        else
+                sprintf(p, "%s%d", driver->name, index + driver->name_base);
 }
 
 /**
@@ -1249,21 +1255,19 @@ int tty_init_termios(struct tty_struct *tty)
         struct ktermios *tp;
         int idx = tty->index;
 
-        tp = tty->driver->termios[idx];
-        if (tp == NULL) {
-                tp = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
-                if (tp == NULL)
-                        return -ENOMEM;
-                memcpy(tp, &tty->driver->init_termios,
-                                                sizeof(struct ktermios));
-                tty->driver->termios[idx] = tp;
+        if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
+                tty->termios = tty->driver->init_termios;
+        else {
+                /* Check for lazy saved data */
+                tp = tty->driver->termios[idx];
+                if (tp != NULL)
+                        tty->termios = *tp;
+                else
+                        tty->termios = tty->driver->init_termios;
         }
-        tty->termios = tp;
-        tty->termios_locked = tp + 1;
-
         /* Compatibility until drivers always set this */
-        tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
-        tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+        tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
+        tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
         return 0;
 }
 EXPORT_SYMBOL_GPL(tty_init_termios);
@@ -1403,10 +1407,18 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
         }
         initialize_tty_struct(tty, driver, idx);
 
+        tty_lock(tty);
         retval = tty_driver_install_tty(driver, tty);
         if (retval < 0)
                 goto err_deinit_tty;
 
+        if (!tty->port)
+                tty->port = driver->ports[idx];
+
+        WARN_RATELIMIT(!tty->port,
+                        "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
+                        __func__, tty->driver->name);
+
         /*
          * Structures all installed ... call the ldisc open routines.
          * If we fail here just call release_tty to clean up.  No need
@@ -1415,9 +1427,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
         retval = tty_ldisc_setup(tty, tty->link);
         if (retval)
                 goto err_release_tty;
+        /* Return the tty locked so that it cannot vanish under the caller */
         return tty;
 
 err_deinit_tty:
+        tty_unlock(tty);
         deinitialize_tty_struct(tty);
         free_tty_struct(tty);
 err_module_put:
@@ -1426,6 +1440,7 @@ err_module_put:
 
         /* call the tty release_tty routine to clean out this slot */
 err_release_tty:
+        tty_unlock(tty);
         printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
                                  "clearing slot %d\n", idx);
         release_tty(tty, idx);
@@ -1436,22 +1451,25 @@ void tty_free_termios(struct tty_struct *tty)
 {
         struct ktermios *tp;
         int idx = tty->index;
-        /* Kill this flag and push into drivers for locking etc */
-        if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
-                /* FIXME: Locking on ->termios array */
-                tp = tty->termios;
-                tty->driver->termios[idx] = NULL;
-                kfree(tp);
+
+        /* If the port is going to reset then it has no termios to save */
+        if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
+                return;
+
+        /* Stash the termios data */
+        tp = tty->driver->termios[idx];
+        if (tp == NULL) {
+                tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+                if (tp == NULL) {
+                        pr_warn("tty: no memory to save termios state.\n");
+                        return;
+                }
+                tty->driver->termios[idx] = tp;
         }
+        *tp = tty->termios;
 }
 EXPORT_SYMBOL(tty_free_termios);
 
-void tty_shutdown(struct tty_struct *tty)
-{
-        tty_driver_remove_tty(tty->driver, tty);
-        tty_free_termios(tty);
-}
-EXPORT_SYMBOL(tty_shutdown);
 
 /**
  *      release_one_tty         -       release tty structure memory
@@ -1462,7 +1480,6 @@ EXPORT_SYMBOL(tty_shutdown);
  *      in use. It also gets called when setup of a device fails.
  *
  *      Locking:
- *              tty_mutex - sometimes only
  *              takes the file list lock internally when working on the list
  *      of ttys that the driver keeps.
  *
@@ -1495,11 +1512,6 @@ static void queue_release_one_tty(struct kref *kref)
 {
         struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
 
-        if (tty->ops->shutdown)
-                tty->ops->shutdown(tty);
-        else
-                tty_shutdown(tty);
-
         /* The hangup queue is now free so we can reuse it rather than
            waste a chunk of memory for each port */
         INIT_WORK(&tty->hangup_work, release_one_tty);
@@ -1528,16 +1540,20 @@ EXPORT_SYMBOL(tty_kref_put);
  *      and decrement the refcount of the backing module.
  *
  *      Locking:
- *              tty_mutex - sometimes only
+ *              tty_mutex
  *              takes the file list lock internally when working on the list
  *      of ttys that the driver keeps.
- *              FIXME: should we require tty_mutex is held here ??
  *
  */
 static void release_tty(struct tty_struct *tty, int idx)
 {
         /* This should always be true but check for the moment */
         WARN_ON(tty->index != idx);
+        WARN_ON(!mutex_is_locked(&tty_mutex));
+        if (tty->ops->shutdown)
+                tty->ops->shutdown(tty);
+        tty_free_termios(tty);
+        tty_driver_remove_tty(tty->driver, tty);
 
         if (tty->link)
                 tty_kref_put(tty->link);
@@ -1572,22 +1588,12 @@ static int tty_release_checks(struct tty_struct *tty, struct tty_struct *o_tty,
                                 __func__, idx, tty->name);
                 return -1;
         }
-        if (tty->termios != tty->driver->termios[idx]) {
-                printk(KERN_DEBUG "%s: driver.termios[%d] not termios for (%s)\n",
-                                __func__, idx, tty->name);
-                return -1;
-        }
         if (tty->driver->other) {
                 if (o_tty != tty->driver->other->ttys[idx]) {
                         printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n",
                                         __func__, idx, tty->name);
                         return -1;
                 }
-                if (o_tty->termios != tty->driver->other->termios[idx]) {
-                        printk(KERN_DEBUG "%s: other->termios[%d] not o_termios for (%s)\n",
-                                        __func__, idx, tty->name);
-                        return -1;
-                }
                 if (o_tty->link != tty) {
                         printk(KERN_DEBUG "%s: bad pty pointers\n", __func__);
                         return -1;
@@ -1628,7 +1634,7 @@ int tty_release(struct inode *inode, struct file *filp)
         if (tty_paranoia_check(tty, inode, __func__))
                 return 0;
 
-        tty_lock();
+        tty_lock(tty);
         check_tty_count(tty, __func__);
 
         __tty_fasync(-1, filp, 0);
@@ -1637,10 +1643,11 @@ int tty_release(struct inode *inode, struct file *filp)
         pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
                       tty->driver->subtype == PTY_TYPE_MASTER);
         devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
+        /* Review: parallel close */
         o_tty = tty->link;
 
         if (tty_release_checks(tty, o_tty, idx)) {
-                tty_unlock();
+                tty_unlock(tty);
                 return 0;
         }
 
@@ -1652,7 +1659,7 @@ int tty_release(struct inode *inode, struct file *filp)
         if (tty->ops->close)
                 tty->ops->close(tty, filp);
 
-        tty_unlock();
+        tty_unlock(tty);
         /*
          * Sanity check: if tty->count is going to zero, there shouldn't be
          * any waiters on tty->read_wait or tty->write_wait.  We test the
@@ -1675,7 +1682,7 @@ int tty_release(struct inode *inode, struct file *filp)
                    opens on /dev/tty */
 
                 mutex_lock(&tty_mutex);
-                tty_lock();
+                tty_lock_pair(tty, o_tty);
                 tty_closing = tty->count <= 1;
                 o_tty_closing = o_tty &&
                         (o_tty->count <= (pty_master ? 1 : 0));
@@ -1706,7 +1713,7 @@ int tty_release(struct inode *inode, struct file *filp)
 
                 printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
                                 __func__, tty_name(tty, buf));
-                tty_unlock();
+                tty_unlock_pair(tty, o_tty);
                 mutex_unlock(&tty_mutex);
                 schedule();
         }
@@ -1715,6 +1722,9 @@ int tty_release(struct inode *inode, struct file *filp)
          * The closing flags are now consistent with the open counts on
          * both sides, and we've completed the last operation that could
          * block, so it's safe to proceed with closing.
+         *
+         * We must *not* drop the tty_mutex until we ensure that a further
+         * entry into tty_open can not pick up this tty.
          */
         if (pty_master) {
                 if (--o_tty->count < 0) {
@@ -1766,12 +1776,13 @@ int tty_release(struct inode *inode, struct file *filp)
         }
 
         mutex_unlock(&tty_mutex);
+        tty_unlock_pair(tty, o_tty);
+        /* At this point the TTY_CLOSING flag should ensure a dead tty
+           cannot be re-opened by a racing opener */
 
         /* check whether both sides are closing ... */
-        if (!tty_closing || (o_tty && !o_tty_closing)) {
-                tty_unlock();
+        if (!tty_closing || (o_tty && !o_tty_closing))
                 return 0;
-        }
 
 #ifdef TTY_DEBUG_HANGUP
         printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__);
@@ -1782,14 +1793,17 @@ int tty_release(struct inode *inode, struct file *filp)
         tty_ldisc_release(tty, o_tty);
         /*
          * The release_tty function takes care of the details of clearing
-         * the slots and preserving the termios structure.
+         * the slots and preserving the termios structure. The tty_unlock_pair
+         * should be safe as we keep a kref while the tty is locked (so the
+         * unlock never unlocks a freed tty).
          */
+        mutex_lock(&tty_mutex);
         release_tty(tty, idx);
+        mutex_unlock(&tty_mutex);
 
         /* Make this pty number available for reallocation */
         if (devpts)
                 devpts_kill_index(inode, idx);
-        tty_unlock();
         return 0;
 }
 
@@ -1893,6 +1907,9 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
  *      Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
  *               tty->count should protect the rest.
  *               ->siglock protects ->signal/->sighand
+ *
+ *      Note: the tty_unlock/lock cases without a ref are only safe due to
+ *      tty_mutex
  */
 
 static int tty_open(struct inode *inode, struct file *filp)
@@ -1916,8 +1933,7 @@ retry_open:
         retval = 0;
 
         mutex_lock(&tty_mutex);
-        tty_lock();
-
+        /* This is protected by the tty_mutex */
         tty = tty_open_current_tty(device, filp);
         if (IS_ERR(tty)) {
                 retval = PTR_ERR(tty);
@@ -1938,17 +1954,19 @@ retry_open:
         }
 
         if (tty) {
+                tty_lock(tty);
                 retval = tty_reopen(tty);
-                if (retval)
+                if (retval < 0) {
+                        tty_unlock(tty);
                         tty = ERR_PTR(retval);
-        } else
+                }
+        } else  /* Returns with the tty_lock held for now */
                 tty = tty_init_dev(driver, index);
 
         mutex_unlock(&tty_mutex);
         if (driver)
                 tty_driver_kref_put(driver);
         if (IS_ERR(tty)) {
-                tty_unlock();
                 retval = PTR_ERR(tty);
                 goto err_file;
         }
@@ -1977,7 +1995,7 @@ retry_open:
                 printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
                                 retval, tty->name);
 #endif
-                tty_unlock(); /* need to call tty_release without BTM */
+                tty_unlock(tty); /* need to call tty_release without BTM */
                 tty_release(inode, filp);
                 if (retval != -ERESTARTSYS)
                         return retval;
@@ -1989,17 +2007,15 @@ retry_open:
                 /*
                  * Need to reset f_op in case a hangup happened.
                  */
-                tty_lock();
                 if (filp->f_op == &hung_up_tty_fops)
                         filp->f_op = &tty_fops;
-                tty_unlock();
                 goto retry_open;
         }
-        tty_unlock();
+        tty_unlock(tty);
 
 
         mutex_lock(&tty_mutex);
-        tty_lock();
+        tty_lock(tty);
         spin_lock_irq(&current->sighand->siglock);
         if (!noctty &&
             current->signal->leader &&
@@ -2007,11 +2023,10 @@ retry_open:
             tty->session == NULL)
                 __proc_set_tty(current, tty);
         spin_unlock_irq(&current->sighand->siglock);
-        tty_unlock();
+        tty_unlock(tty);
         mutex_unlock(&tty_mutex);
         return 0;
 err_unlock:
-        tty_unlock();
         mutex_unlock(&tty_mutex);
         /* after locks to avoid deadlock */
         if (!IS_ERR_OR_NULL(driver))
@@ -2094,10 +2109,13 @@ out:
 
 static int tty_fasync(int fd, struct file *filp, int on)
 {
+        struct tty_struct *tty = file_tty(filp);
         int retval;
-        tty_lock();
+
+        tty_lock(tty);
         retval = __tty_fasync(fd, filp, on);
-        tty_unlock();
+        tty_unlock(tty);
+
         return retval;
 }
 
@@ -2756,7 +2774,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
         if (ld->ops->ioctl) {
                 retval = ld->ops->ioctl(tty, file, cmd, arg);
                 if (retval == -ENOIOCTLCMD)
-                        retval = -EINVAL;
+                        retval = -ENOTTY;
         }
         tty_ldisc_deref(ld);
         return retval;
@@ -2934,6 +2952,7 @@ void initialize_tty_struct(struct tty_struct *tty,
         tty->pgrp = NULL;
         tty->overrun_time = jiffies;
         tty_buffer_init(tty);
+        mutex_init(&tty->legacy_mutex);
         mutex_init(&tty->termios_mutex);
         mutex_init(&tty->ldisc_mutex);
         init_waitqueue_head(&tty->write_wait);
@@ -2991,6 +3010,15 @@ EXPORT_SYMBOL_GPL(tty_put_char);
 
 struct class *tty_class;
 
+static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
+                unsigned int index, unsigned int count)
+{
+        /* init here, since reused cdevs cause crashes */
+        cdev_init(&driver->cdevs[index], &tty_fops);
+        driver->cdevs[index].owner = driver->owner;
+        return cdev_add(&driver->cdevs[index], dev, count);
+}
+
 /**
  *      tty_register_device - register a tty device
  *      @driver: the tty driver that describes the tty device
@@ -3013,8 +3041,46 @@ struct class *tty_class;
 struct device *tty_register_device(struct tty_driver *driver, unsigned index,
                                    struct device *device)
 {
+        return tty_register_device_attr(driver, index, device, NULL, NULL);
+}
+EXPORT_SYMBOL(tty_register_device);
+
+static void tty_device_create_release(struct device *dev)
+{
+        pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
+        kfree(dev);
+}
+
+/**
+ *      tty_register_device_attr - register a tty device
+ *      @driver: the tty driver that describes the tty device
+ *      @index: the index in the tty driver for this tty device
+ *      @device: a struct device that is associated with this tty device.
+ *              This field is optional, if there is no known struct device
+ *              for this tty device it can be set to NULL safely.
+ *      @drvdata: Driver data to be set to device.
+ *      @attr_grp: Attribute group to be set on device.
+ *
+ *      Returns a pointer to the struct device for this tty device
+ *      (or ERR_PTR(-EFOO) on error).
+ *
+ *      This call is required to be made to register an individual tty device
+ *      if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set.  If
+ *      that bit is not set, this function should not be called by a tty
+ *      driver.
+ *
+ *      Locking: ??
+ */
+struct device *tty_register_device_attr(struct tty_driver *driver,
+                                   unsigned index, struct device *device,
+                                   void *drvdata,
+                                   const struct attribute_group **attr_grp)
+{
         char name[64];
-        dev_t dev = MKDEV(driver->major, driver->minor_start) + index;
+        dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
+        struct device *dev = NULL;
+        int retval = -ENODEV;
+        bool cdev = false;
 
         if (index >= driver->num) {
                 printk(KERN_ERR "Attempt to register invalid tty line number "
@@ -3027,9 +3093,40 @@ struct device *tty_register_device(struct tty_driver *driver, unsigned index,
         else
                 tty_line_name(driver, index, name);
 
-        return device_create(tty_class, device, dev, NULL, name);
+        if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+                retval = tty_cdev_add(driver, devt, index, 1);
+                if (retval)
+                        goto error;
+                cdev = true;
+        }
+
+        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+        if (!dev) {
+                retval = -ENOMEM;
+                goto error;
+        }
+
+        dev->devt = devt;
+        dev->class = tty_class;
+        dev->parent = device;
+        dev->release = tty_device_create_release;
+        dev_set_name(dev, "%s", name);
+        dev->groups = attr_grp;
+        dev_set_drvdata(dev, drvdata);
+
+        retval = device_register(dev);
+        if (retval)
+                goto error;
+
+        return dev;
+
+error:
+        put_device(dev);
+        if (cdev)
+                cdev_del(&driver->cdevs[index]);
+        return ERR_PTR(retval);
 }
-EXPORT_SYMBOL(tty_register_device);
+EXPORT_SYMBOL_GPL(tty_register_device_attr);
 
 /**
  *      tty_unregister_device - unregister a tty device
@@ -3046,31 +3143,82 @@ void tty_unregister_device(struct tty_driver *driver, unsigned index)
 {
         device_destroy(tty_class,
                 MKDEV(driver->major, driver->minor_start) + index);
+        if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC))
+                cdev_del(&driver->cdevs[index]);
 }
 EXPORT_SYMBOL(tty_unregister_device);
 
-struct tty_driver *__alloc_tty_driver(int lines, struct module *owner)
+/**
+ * __tty_alloc_driver -- allocate tty driver
+ * @lines: count of lines this driver can handle at most
+ * @owner: module which is repsonsible for this driver
+ * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
+ *
+ * This should not be called directly, some of the provided macros should be
+ * used instead. Use IS_ERR and friends on @retval.
+ */
+struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
+                unsigned long flags)
 {
         struct tty_driver *driver;
+        unsigned int cdevs = 1;
+        int err;
+
+        if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
+                return ERR_PTR(-EINVAL);
 
         driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
-        if (driver) {
-                kref_init(&driver->kref);
-                driver->magic = TTY_DRIVER_MAGIC;
-                driver->num = lines;
-                driver->owner = owner;
-                /* later we'll move allocation of tables here */
+        if (!driver)
+                return ERR_PTR(-ENOMEM);
+
+        kref_init(&driver->kref);
+        driver->magic = TTY_DRIVER_MAGIC;
+        driver->num = lines;
+        driver->owner = owner;
+        driver->flags = flags;
+
+        if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
+                driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
+                                GFP_KERNEL);
+                driver->termios = kcalloc(lines, sizeof(*driver->termios),
+                                GFP_KERNEL);
+                if (!driver->ttys || !driver->termios) {
+                        err = -ENOMEM;
+                        goto err_free_all;
+                }
         }
+
+        if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+                driver->ports = kcalloc(lines, sizeof(*driver->ports),
+                                GFP_KERNEL);
+                if (!driver->ports) {
+                        err = -ENOMEM;
+                        goto err_free_all;
+                }
+                cdevs = lines;
+        }
+
+        driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
+        if (!driver->cdevs) {
+                err = -ENOMEM;
+                goto err_free_all;
+        }
+
         return driver;
+err_free_all:
+        kfree(driver->ports);
+        kfree(driver->ttys);
+        kfree(driver->termios);
+        kfree(driver);
+        return ERR_PTR(err);
 }
-EXPORT_SYMBOL(__alloc_tty_driver);
+EXPORT_SYMBOL(__tty_alloc_driver);
 
 static void destruct_tty_driver(struct kref *kref)
 {
         struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
         int i;
         struct ktermios *tp;
-        void *p;
 
         if (driver->flags & TTY_DRIVER_INSTALLED) {
                 /*
@@ -3087,13 +3235,14 @@ static void destruct_tty_driver(struct kref *kref)
                         if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
                                 tty_unregister_device(driver, i);
                 }
-                p = driver->ttys;
                 proc_tty_unregister_driver(driver);
-                driver->ttys = NULL;
-                driver->termios = NULL;
-                kfree(p);
-                cdev_del(&driver->cdev);
+                if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
+                        cdev_del(&driver->cdevs[0]);
         }
+        kfree(driver->cdevs);
+        kfree(driver->ports);
+        kfree(driver->termios);
+        kfree(driver->ttys);
         kfree(driver);
 }
 
@@ -3124,15 +3273,8 @@ int tty_register_driver(struct tty_driver *driver)
         int error;
         int i;
         dev_t dev;
-        void **p = NULL;
         struct device *d;
 
-        if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
-                p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
-                if (!p)
-                        return -ENOMEM;
-        }
-
         if (!driver->major) {
                 error = alloc_chrdev_region(&dev, driver->minor_start,
                                                 driver->num, driver->name);
@@ -3144,28 +3286,13 @@ int tty_register_driver(struct tty_driver *driver)
                 dev = MKDEV(driver->major, driver->minor_start);
                 error = register_chrdev_region(dev, driver->num, driver->name);
         }
-        if (error < 0) {
-                kfree(p);
-                return error;
-        }
+        if (error < 0)
+                goto err;
 
-        if (p) {
-                driver->ttys = (struct tty_struct **)p;
-                driver->termios = (struct ktermios **)(p + driver->num);
-        } else {
-                driver->ttys = NULL;
-                driver->termios = NULL;
-        }
-
-        cdev_init(&driver->cdev, &tty_fops);
-        driver->cdev.owner = driver->owner;
-        error = cdev_add(&driver->cdev, dev, driver->num);
-        if (error) {
-                unregister_chrdev_region(dev, driver->num);
-                driver->ttys = NULL;
-                driver->termios = NULL;
-                kfree(p);
-                return error;
+        if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
+                error = tty_cdev_add(driver, dev, 0, driver->num);
+                if (error)
+                        goto err_unreg_char;
         }
 
         mutex_lock(&tty_mutex);
@@ -3177,7 +3304,7 @@ int tty_register_driver(struct tty_driver *driver)
                         d = tty_register_device(driver, i, NULL);
                         if (IS_ERR(d)) {
                                 error = PTR_ERR(d);
-                                goto err;
+                                goto err_unreg_devs;
                         }
                 }
         }
@@ -3185,7 +3312,7 @@ int tty_register_driver(struct tty_driver *driver)
         driver->flags |= TTY_DRIVER_INSTALLED;
         return 0;
 
-err:
+err_unreg_devs:
         for (i--; i >= 0; i--)
                 tty_unregister_device(driver, i);
 
@@ -3193,13 +3320,11 @@ err:
         list_del(&driver->tty_drivers);
         mutex_unlock(&tty_mutex);
 
+err_unreg_char:
         unregister_chrdev_region(dev, driver->num);
-        driver->ttys = NULL;
-        driver->termios = NULL;
-        kfree(p);
+err:
         return error;
 }
-
 EXPORT_SYMBOL(tty_register_driver);
 
 /*
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index a1b9a2f68567..12b1fa0f4f86 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -410,7 +410,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
 
 void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
 {
-        tty_termios_encode_baud_rate(tty->termios, ibaud, obaud);
+        tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud);
 }
 EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
 
@@ -427,7 +427,7 @@ EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
 
 speed_t tty_get_baud_rate(struct tty_struct *tty)
 {
-        speed_t baud = tty_termios_baud_rate(tty->termios);
+        speed_t baud = tty_termios_baud_rate(&tty->termios);
 
         if (baud == 38400 && tty->alt_speed) {
                 if (!tty->warned) {
@@ -509,14 +509,14 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
         /* FIXME: we need to decide on some locking/ordering semantics
            for the set_termios notification eventually */
         mutex_lock(&tty->termios_mutex);
-        old_termios = *tty->termios;
-        *tty->termios = *new_termios;
-        unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
+        old_termios = tty->termios;
+        tty->termios = *new_termios;
+        unset_locked_termios(&tty->termios, &old_termios, &tty->termios_locked);
 
         /* See if packet mode change of state. */
         if (tty->link && tty->link->packet) {
                 int extproc = (old_termios.c_lflag & EXTPROC) |
-                                (tty->termios->c_lflag & EXTPROC);
+                                (tty->termios.c_lflag & EXTPROC);
                 int old_flow = ((old_termios.c_iflag & IXON) &&
                                 (old_termios.c_cc[VSTOP] == '\023') &&
                                 (old_termios.c_cc[VSTART] == '\021'));
@@ -542,7 +542,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
         if (tty->ops->set_termios)
                 (*tty->ops->set_termios)(tty, &old_termios);
         else
-                tty_termios_copy_hw(tty->termios, &old_termios);
+                tty_termios_copy_hw(&tty->termios, &old_termios);
 
         ld = tty_ldisc_ref(tty);
         if (ld != NULL) {
@@ -578,7 +578,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
                 return retval;
 
         mutex_lock(&tty->termios_mutex);
-        memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios));
+        tmp_termios = tty->termios;
         mutex_unlock(&tty->termios_mutex);
 
         if (opt & TERMIOS_TERMIO) {
@@ -632,14 +632,14 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
 static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
 {
         mutex_lock(&tty->termios_mutex);
-        memcpy(kterm, tty->termios, sizeof(struct ktermios));
+        *kterm = tty->termios;
         mutex_unlock(&tty->termios_mutex);
 }
 
 static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
 {
         mutex_lock(&tty->termios_mutex);
-        memcpy(kterm, tty->termios_locked, sizeof(struct ktermios));
+        *kterm = tty->termios_locked;
         mutex_unlock(&tty->termios_mutex);
 }
 
@@ -707,16 +707,16 @@ static int get_sgflags(struct tty_struct *tty)
 {
         int flags = 0;
 
-        if (!(tty->termios->c_lflag & ICANON)) {
-                if (tty->termios->c_lflag & ISIG)
+        if (!(tty->termios.c_lflag & ICANON)) {
+                if (tty->termios.c_lflag & ISIG)
                         flags |= 0x02;          /* cbreak */
                 else
                         flags |= 0x20;          /* raw */
         }
-        if (tty->termios->c_lflag & ECHO)
+        if (tty->termios.c_lflag & ECHO)
                 flags |= 0x08;                  /* echo */
-        if (tty->termios->c_oflag & OPOST)
-                if (tty->termios->c_oflag & ONLCR)
+        if (tty->termios.c_oflag & OPOST)
+                if (tty->termios.c_oflag & ONLCR)
                         flags |= 0x10;          /* crmod */
         return flags;
 }
@@ -726,10 +726,10 @@ static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
         struct sgttyb tmp;
 
         mutex_lock(&tty->termios_mutex);
-        tmp.sg_ispeed = tty->termios->c_ispeed;
-        tmp.sg_ospeed = tty->termios->c_ospeed;
-        tmp.sg_erase = tty->termios->c_cc[VERASE];
-        tmp.sg_kill = tty->termios->c_cc[VKILL];
+        tmp.sg_ispeed = tty->termios.c_ispeed;
+        tmp.sg_ospeed = tty->termios.c_ospeed;
+        tmp.sg_erase = tty->termios.c_cc[VERASE];
+        tmp.sg_kill = tty->termios.c_cc[VKILL];
         tmp.sg_flags = get_sgflags(tty);
         mutex_unlock(&tty->termios_mutex);
 
@@ -787,7 +787,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
                 return -EFAULT;
 
         mutex_lock(&tty->termios_mutex);
-        termios = *tty->termios;
+        termios = tty->termios;
         termios.c_cc[VERASE] = tmp.sg_erase;
         termios.c_cc[VKILL] = tmp.sg_kill;
         set_sgflags(&termios, tmp.sg_flags);
@@ -808,12 +808,12 @@ static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars)
         struct tchars tmp;
 
         mutex_lock(&tty->termios_mutex);
-        tmp.t_intrc = tty->termios->c_cc[VINTR];
-        tmp.t_quitc = tty->termios->c_cc[VQUIT];
-        tmp.t_startc = tty->termios->c_cc[VSTART];
-        tmp.t_stopc = tty->termios->c_cc[VSTOP];
-        tmp.t_eofc = tty->termios->c_cc[VEOF];
-        tmp.t_brkc = tty->termios->c_cc[VEOL2]; /* what is brkc anyway? */
+        tmp.t_intrc = tty->termios.c_cc[VINTR];
+        tmp.t_quitc = tty->termios.c_cc[VQUIT];
+        tmp.t_startc = tty->termios.c_cc[VSTART];
+        tmp.t_stopc = tty->termios.c_cc[VSTOP];
+        tmp.t_eofc = tty->termios.c_cc[VEOF];
+        tmp.t_brkc = tty->termios.c_cc[VEOL2];  /* what is brkc anyway? */
         mutex_unlock(&tty->termios_mutex);
         return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
 }
@@ -825,12 +825,12 @@ static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars)
         if (copy_from_user(&tmp, tchars, sizeof(tmp)))
                 return -EFAULT;
         mutex_lock(&tty->termios_mutex);
-        tty->termios->c_cc[VINTR] = tmp.t_intrc;
-        tty->termios->c_cc[VQUIT] = tmp.t_quitc;
-        tty->termios->c_cc[VSTART] = tmp.t_startc;
-        tty->termios->c_cc[VSTOP] = tmp.t_stopc;
-        tty->termios->c_cc[VEOF] = tmp.t_eofc;
-        tty->termios->c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
+        tty->termios.c_cc[VINTR] = tmp.t_intrc;
+        tty->termios.c_cc[VQUIT] = tmp.t_quitc;
+        tty->termios.c_cc[VSTART] = tmp.t_startc;
+        tty->termios.c_cc[VSTOP] = tmp.t_stopc;
+        tty->termios.c_cc[VEOF] = tmp.t_eofc;
+        tty->termios.c_cc[VEOL2] = tmp.t_brkc;  /* what is brkc anyway? */
         mutex_unlock(&tty->termios_mutex);
         return 0;
 }
@@ -842,14 +842,14 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
         struct ltchars tmp;
 
         mutex_lock(&tty->termios_mutex);
-        tmp.t_suspc = tty->termios->c_cc[VSUSP];
+        tmp.t_suspc = tty->termios.c_cc[VSUSP];
         /* what is dsuspc anyway? */
-        tmp.t_dsuspc = tty->termios->c_cc[VSUSP];
-        tmp.t_rprntc = tty->termios->c_cc[VREPRINT];
+        tmp.t_dsuspc = tty->termios.c_cc[VSUSP];
+        tmp.t_rprntc = tty->termios.c_cc[VREPRINT];
         /* what is flushc anyway? */
-        tmp.t_flushc = tty->termios->c_cc[VEOL2];
-        tmp.t_werasc = tty->termios->c_cc[VWERASE];
-        tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
+        tmp.t_flushc = tty->termios.c_cc[VEOL2];
+        tmp.t_werasc = tty->termios.c_cc[VWERASE];
+        tmp.t_lnextc = tty->termios.c_cc[VLNEXT];
         mutex_unlock(&tty->termios_mutex);
         return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
 }
@@ -862,14 +862,14 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
                 return -EFAULT;
 
         mutex_lock(&tty->termios_mutex);
-        tty->termios->c_cc[VSUSP] = tmp.t_suspc;
+        tty->termios.c_cc[VSUSP] = tmp.t_suspc;
         /* what is dsuspc anyway? */
-        tty->termios->c_cc[VEOL2] = tmp.t_dsuspc;
-        tty->termios->c_cc[VREPRINT] = tmp.t_rprntc;
+        tty->termios.c_cc[VEOL2] = tmp.t_dsuspc;
+        tty->termios.c_cc[VREPRINT] = tmp.t_rprntc;
         /* what is flushc anyway? */
-        tty->termios->c_cc[VEOL2] = tmp.t_flushc;
-        tty->termios->c_cc[VWERASE] = tmp.t_werasc;
-        tty->termios->c_cc[VLNEXT] = tmp.t_lnextc;
+        tty->termios.c_cc[VEOL2] = tmp.t_flushc;
+        tty->termios.c_cc[VWERASE] = tmp.t_werasc;
+        tty->termios.c_cc[VLNEXT] = tmp.t_lnextc;
         mutex_unlock(&tty->termios_mutex);
         return 0;
 }
@@ -920,12 +920,12 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
         struct ktermios old;
 
         mutex_lock(&tty->termios_mutex);
-        old = *tty->termios;
-        tty->termios->c_cflag &= ~CLOCAL;
-        tty->termios->c_cflag |= bit;
+        old = tty->termios;
+        tty->termios.c_cflag &= ~CLOCAL;
+        tty->termios.c_cflag |= bit;
         if (tty->ops->set_termios)
                 tty->ops->set_termios(tty, &old);
-        if ((tty->termios->c_cflag & CLOCAL) != bit)
+        if ((tty->termios.c_cflag & CLOCAL) != bit)
                 ret = -EINVAL;
         mutex_unlock(&tty->termios_mutex);
         return ret;
@@ -1031,7 +1031,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
                                                (struct termios __user *) arg))
                         return -EFAULT;
                 mutex_lock(&real_tty->termios_mutex);
-                memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
+                real_tty->termios_locked = kterm;
                 mutex_unlock(&real_tty->termios_mutex);
                 return 0;
 #else
@@ -1048,7 +1048,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
                                                (struct termios __user *) arg))
                         return -EFAULT;
                 mutex_lock(&real_tty->termios_mutex);
-                memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
+                real_tty->termios_locked = kterm;
                 mutex_unlock(&real_tty->termios_mutex);
                 return ret;
 #endif
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 6f99c9959f0c..4d7b56268c79 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -413,7 +413,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
 static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
 {
         mutex_lock(&tty->termios_mutex);
-        tty->termios->c_line = num;
+        tty->termios.c_line = num;
         mutex_unlock(&tty->termios_mutex);
 }
 
@@ -568,7 +568,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
         if (IS_ERR(new_ldisc))
                 return PTR_ERR(new_ldisc);
 
-        tty_lock();
+        tty_lock(tty);
         /*
          *      We need to look at the tty locking here for pty/tty pairs
          *      when both sides try to change in parallel.
@@ -582,12 +582,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
          */
 
         if (tty->ldisc->ops->num == ldisc) {
-                tty_unlock();
+                tty_unlock(tty);
                 tty_ldisc_put(new_ldisc);
                 return 0;
         }
 
-        tty_unlock();
+        tty_unlock(tty);
         /*
          *      Problem: What do we do if this blocks ?
          *      We could deadlock here
@@ -595,7 +595,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
         tty_wait_until_sent(tty, 0);
 
-        tty_lock();
+        tty_lock(tty);
         mutex_lock(&tty->ldisc_mutex);
 
         /*
@@ -605,10 +605,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
         while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
                 mutex_unlock(&tty->ldisc_mutex);
-                tty_unlock();
+                tty_unlock(tty);
                 wait_event(tty_ldisc_wait,
                         test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
-                tty_lock();
+                tty_lock(tty);
                 mutex_lock(&tty->ldisc_mutex);
         }
 
@@ -623,7 +623,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
         o_ldisc = tty->ldisc;
 
-        tty_unlock();
+        tty_unlock(tty);
         /*
          *      Make sure we don't change while someone holds a
          *      reference to the line discipline. The TTY_LDISC bit
@@ -650,7 +650,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
         retval = tty_ldisc_wait_idle(tty, 5 * HZ);
 
-        tty_lock();
+        tty_lock(tty);
         mutex_lock(&tty->ldisc_mutex);
 
         /* handle wait idle failure locked */
@@ -665,7 +665,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
                 clear_bit(TTY_LDISC_CHANGING, &tty->flags);
                 mutex_unlock(&tty->ldisc_mutex);
                 tty_ldisc_put(new_ldisc);
-                tty_unlock();
+                tty_unlock(tty);
                 return -EIO;
         }
 
@@ -708,7 +708,7 @@ enable:
         if (o_work)
                 schedule_work(&o_tty->buf.work);
         mutex_unlock(&tty->ldisc_mutex);
-        tty_unlock();
+        tty_unlock(tty);
         return retval;
 }
 
@@ -722,9 +722,9 @@ enable:
 static void tty_reset_termios(struct tty_struct *tty)
 {
         mutex_lock(&tty->termios_mutex);
-        *tty->termios = tty->driver->init_termios;
-        tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
-        tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+        tty->termios = tty->driver->init_termios;
+        tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
+        tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
         mutex_unlock(&tty->termios_mutex);
 }
 
@@ -816,11 +816,11 @@ void tty_ldisc_hangup(struct tty_struct *tty)
          * need to wait for another function taking the BTM
          */
         clear_bit(TTY_LDISC, &tty->flags);
-        tty_unlock();
+        tty_unlock(tty);
         cancel_work_sync(&tty->buf.work);
         mutex_unlock(&tty->ldisc_mutex);
 retry:
-        tty_lock();
+        tty_lock(tty);
         mutex_lock(&tty->ldisc_mutex);
 
         /* At this point we have a closed ldisc and we want to
@@ -831,7 +831,7 @@ retry:
                 if (atomic_read(&tty->ldisc->users) != 1) {
                         char cur_n[TASK_COMM_LEN], tty_n[64];
                         long timeout = 3 * HZ;
-                        tty_unlock();
+                        tty_unlock(tty);
 
                         while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
                                 timeout = MAX_SCHEDULE_TIMEOUT;
@@ -846,7 +846,7 @@ retry:
 
                 if (reset == 0) {
 
-                        if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+                        if (!tty_ldisc_reinit(tty, tty->termios.c_line))
                                 err = tty_ldisc_open(tty, tty->ldisc);
                         else
                                 err = 1;
@@ -894,6 +894,23 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
         tty_ldisc_enable(tty);
         return 0;
 }
+
+static void tty_ldisc_kill(struct tty_struct *tty)
+{
+        mutex_lock(&tty->ldisc_mutex);
+        /*
+         * Now kill off the ldisc
+         */
+        tty_ldisc_close(tty, tty->ldisc);
+        tty_ldisc_put(tty->ldisc);
+        /* Force an oops if we mess this up */
+        tty->ldisc = NULL;
+
+        /* Ensure the next open requests the N_TTY ldisc */
+        tty_set_termios_ldisc(tty, N_TTY);
+        mutex_unlock(&tty->ldisc_mutex);
+}
+
 /**
  *      tty_ldisc_release               -       release line discipline
  *      @tty: tty being shut down
@@ -912,28 +929,21 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
          * race with the set_ldisc code path.
          */
 
-        tty_unlock();
+        tty_lock_pair(tty, o_tty);
         tty_ldisc_halt(tty);
         tty_ldisc_flush_works(tty);
-        tty_lock();
-
-        mutex_lock(&tty->ldisc_mutex);
-        /*
-         * Now kill off the ldisc
-         */
-        tty_ldisc_close(tty, tty->ldisc);
-        tty_ldisc_put(tty->ldisc);
-        /* Force an oops if we mess this up */
-        tty->ldisc = NULL;
-
-        /* Ensure the next open requests the N_TTY ldisc */
-        tty_set_termios_ldisc(tty, N_TTY);
-        mutex_unlock(&tty->ldisc_mutex);
+        if (o_tty) {
+                tty_ldisc_halt(o_tty);
+                tty_ldisc_flush_works(o_tty);
+        }
 
         /* This will need doing differently if we need to lock */
+        tty_ldisc_kill(tty);
+
         if (o_tty)
-                tty_ldisc_release(o_tty, NULL);
+                tty_ldisc_kill(o_tty);
 
+        tty_unlock_pair(tty, o_tty);
         /* And the memory resources remaining (buffers, termios) will be
            disposed of when the kref hits zero */
 }
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 9ff986c32a21..67feac9e6ebb 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -4,29 +4,70 @@
 #include <linux/semaphore.h>
 #include <linux/sched.h>
 
-/*
- * The 'big tty mutex'
- *
- * This mutex is taken and released by tty_lock() and tty_unlock(),
- * replacing the older big kernel lock.
- * It can no longer be taken recursively, and does not get
- * released implicitly while sleeping.
- *
- * Don't use in new code.
- */
-static DEFINE_MUTEX(big_tty_mutex);
+/* Legacy tty mutex glue */
+
+enum {
+        TTY_MUTEX_NORMAL,
+        TTY_MUTEX_NESTED,
+};
 
 /*
  * Getting the big tty mutex.
  */
-void __lockfunc tty_lock(void)
+
+static void __lockfunc tty_lock_nested(struct tty_struct *tty,
+                                       unsigned int subclass)
 {
-        mutex_lock(&big_tty_mutex);
+        if (tty->magic != TTY_MAGIC) {
+                printk(KERN_ERR "L Bad %p\n", tty);
+                WARN_ON(1);
+                return;
+        }
+        tty_kref_get(tty);
+        mutex_lock_nested(&tty->legacy_mutex, subclass);
+}
+
+void __lockfunc tty_lock(struct tty_struct *tty)
+{
+        return tty_lock_nested(tty, TTY_MUTEX_NORMAL);
 }
 EXPORT_SYMBOL(tty_lock);
 
-void __lockfunc tty_unlock(void)
+void __lockfunc tty_unlock(struct tty_struct *tty)
 {
-        mutex_unlock(&big_tty_mutex);
+        if (tty->magic != TTY_MAGIC) {
+                printk(KERN_ERR "U Bad %p\n", tty);
+                WARN_ON(1);
+                return;
+        }
+        mutex_unlock(&tty->legacy_mutex);
+        tty_kref_put(tty);
 }
 EXPORT_SYMBOL(tty_unlock);
+
+/*
+ * Getting the big tty mutex for a pair of ttys with lock ordering
+ * On a non pty/tty pair tty2 can be NULL which is just fine.
+ */
+void __lockfunc tty_lock_pair(struct tty_struct *tty,
+                                        struct tty_struct *tty2)
+{
+        if (tty < tty2) {
+                tty_lock(tty);
+                tty_lock_nested(tty2, TTY_MUTEX_NESTED);
+        } else {
+                if (tty2 && tty2 != tty)
+                        tty_lock(tty2);
+                tty_lock_nested(tty, TTY_MUTEX_NESTED);
+        }
+}
+EXPORT_SYMBOL(tty_lock_pair);
+
+void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+                                                struct tty_struct *tty2)
+{
+        tty_unlock(tty);
+        if (tty2 && tty2 != tty)
+                tty_unlock(tty2);
+}
+EXPORT_SYMBOL(tty_unlock_pair);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index bf6e238146ae..d7bdd8d0c23f 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -33,6 +33,70 @@ void tty_port_init(struct tty_port *port)
 }
 EXPORT_SYMBOL(tty_port_init);
 
+/**
+ * tty_port_link_device - link tty and tty_port
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ *
+ * Provide the tty layer wit ha link from a tty (specified by @index) to a
+ * tty_port (@port). Use this only if neither tty_port_register_device nor
+ * tty_port_install is used in the driver. If used, this has to be called before
+ * tty_register_driver.
+ */
+void tty_port_link_device(struct tty_port *port,
+                struct tty_driver *driver, unsigned index)
+{
+        if (WARN_ON(index >= driver->num))
+                return;
+        driver->ports[index] = port;
+}
+EXPORT_SYMBOL_GPL(tty_port_link_device);
+
+/**
+ * tty_port_register_device - register tty device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ *
+ * It is the same as tty_register_device except the provided @port is linked to
+ * a concrete tty specified by @index. Use this or tty_port_install (or both).
+ * Call tty_port_link_device as a last resort.
+ */
+struct device *tty_port_register_device(struct tty_port *port,
+                struct tty_driver *driver, unsigned index,
+                struct device *device)
+{
+        tty_port_link_device(port, driver, index);
+        return tty_register_device(driver, index, device);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device);
+
+/**
+ * tty_port_register_device_attr - register tty device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ * @drvdata: Driver data to be set to device.
+ * @attr_grp: Attribute group to be set on device.
+ *
+ * It is the same as tty_register_device_attr except the provided @port is
+ * linked to a concrete tty specified by @index. Use this or tty_port_install
+ * (or both). Call tty_port_link_device as a last resort.
+ */
+struct device *tty_port_register_device_attr(struct tty_port *port,
+                struct tty_driver *driver, unsigned index,
+                struct device *device, void *drvdata,
+                const struct attribute_group **attr_grp)
+{
+        tty_port_link_device(port, driver, index);
+        return tty_register_device_attr(driver, index, device, drvdata,
+                        attr_grp);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device_attr);
+
 int tty_port_alloc_xmit_buf(struct tty_port *port)
 {
         /* We may sleep in get_zeroed_page() */
@@ -230,7 +294,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 
         /* block if port is in the process of being closed */
         if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-                wait_event_interruptible_tty(port->close_wait,
+                wait_event_interruptible_tty(tty, port->close_wait,
                                 !(port->flags & ASYNC_CLOSING));
                 if (port->flags & ASYNC_HUP_NOTIFY)
                         return -EAGAIN;
@@ -246,7 +310,7 @@ int tty_port_block_til_ready(struct tty_port *port,
         }
         if (filp->f_flags & O_NONBLOCK) {
                 /* Indicate we are open */
-                if (tty->termios->c_cflag & CBAUD)
+                if (tty->termios.c_cflag & CBAUD)
                         tty_port_raise_dtr_rts(port);
                 port->flags |= ASYNC_NORMAL_ACTIVE;
                 return 0;
@@ -270,7 +334,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 
         while (1) {
                 /* Indicate we are open */
-                if (tty->termios->c_cflag & CBAUD)
+                if (tty->termios.c_cflag & CBAUD)
                         tty_port_raise_dtr_rts(port);
 
                 prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
@@ -296,9 +360,9 @@ int tty_port_block_til_ready(struct tty_port *port,
                         retval = -ERESTARTSYS;
                         break;
                 }
-                tty_unlock();
+                tty_unlock(tty);
                 schedule();
-                tty_lock();
+                tty_lock(tty);
         }
         finish_wait(&port->open_wait, &wait);
 
@@ -369,7 +433,7 @@ int tty_port_close_start(struct tty_port *port,
 
         /* Drop DTR/RTS if HUPCL is set. This causes any attached modem to
            hang up the line */
-        if (tty->termios->c_cflag & HUPCL)
+        if (tty->termios.c_cflag & HUPCL)
                 tty_port_lower_dtr_rts(port);
 
         /* Don't call port->drop for the last reference. Callers will want
@@ -413,6 +477,24 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty,
 }
 EXPORT_SYMBOL(tty_port_close);
 
+/**
+ * tty_port_install - generic tty->ops->install handler
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @tty: tty to be installed
+ *
+ * It is the same as tty_standard_install except the provided @port is linked
+ * to a concrete tty specified by @tty. Use this or tty_port_register_device
+ * (or both). Call tty_port_link_device as a last resort.
+ */
+int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+                struct tty_struct *tty)
+{
+        tty->port = port;
+        return tty_standard_install(driver, tty);
+}
+EXPORT_SYMBOL_GPL(tty_port_install);
+
 int tty_port_open(struct tty_port *port, struct tty_struct *tty,
                                                         struct file *filp)
 {
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 48cc6f25cfd3..681765baef69 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -119,6 +119,7 @@ static const int NR_TYPES = ARRAY_SIZE(max_vals);
 
 static struct input_handler kbd_handler;
 static DEFINE_SPINLOCK(kbd_event_lock);
+static DEFINE_SPINLOCK(led_lock);
 static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];  /* keyboard key bitmap */
 static unsigned char shift_down[NR_SHIFT];              /* shift state counters.. */
 static bool dead_key_next;
@@ -310,7 +311,7 @@ static void put_queue(struct vc_data *vc, int ch)
 
         if (tty) {
                 tty_insert_flip_char(tty, ch, 0);
-                con_schedule_flip(tty);
+                tty_schedule_flip(tty);
         }
 }
 
@@ -325,7 +326,7 @@ static void puts_queue(struct vc_data *vc, char *cp)
                 tty_insert_flip_char(tty, *cp, 0);
                 cp++;
         }
-        con_schedule_flip(tty);
+        tty_schedule_flip(tty);
 }
 
 static void applkey(struct vc_data *vc, int key, char mode)
@@ -586,7 +587,7 @@ static void fn_send_intr(struct vc_data *vc)
         if (!tty)
                 return;
         tty_insert_flip_char(tty, 0, TTY_BREAK);
-        con_schedule_flip(tty);
+        tty_schedule_flip(tty);
 }
 
 static void fn_scroll_forw(struct vc_data *vc)
@@ -984,7 +985,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
  * or (ii) whatever pattern of lights people want to show using KDSETLED,
  * or (iii) specified bits of specified words in kernel memory.
  */
-unsigned char getledstate(void)
+static unsigned char getledstate(void)
 {
         return ledstate;
 }
@@ -992,7 +993,7 @@ unsigned char getledstate(void)
 void setledstate(struct kbd_struct *kbd, unsigned int led)
 {
         unsigned long flags;
-        spin_lock_irqsave(&kbd_event_lock, flags);
+        spin_lock_irqsave(&led_lock, flags);
         if (!(led & ~7)) {
                 ledioctl = led;
                 kbd->ledmode = LED_SHOW_IOCTL;
@@ -1000,7 +1001,7 @@ void setledstate(struct kbd_struct *kbd, unsigned int led)
                 kbd->ledmode = LED_SHOW_FLAGS;
 
         set_leds();
-        spin_unlock_irqrestore(&kbd_event_lock, flags);
+        spin_unlock_irqrestore(&led_lock, flags);
 }
 
 static inline unsigned char getleds(void)
@@ -1049,13 +1050,13 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data)
  */
 int vt_get_leds(int console, int flag)
 {
-        unsigned long flags;
         struct kbd_struct * kbd = kbd_table + console;
         int ret;
+        unsigned long flags;
 
-        spin_lock_irqsave(&kbd_event_lock, flags);
+        spin_lock_irqsave(&led_lock, flags);
         ret = vc_kbd_led(kbd, flag);
-        spin_unlock_irqrestore(&kbd_event_lock, flags);
+        spin_unlock_irqrestore(&led_lock, flags);
 
         return ret;
 }
@@ -1091,11 +1092,11 @@ void vt_set_led_state(int console, int leds)
 void vt_kbd_con_start(int console)
 {
         struct kbd_struct * kbd = kbd_table + console;
-/*      unsigned long flags; */
-/*      spin_lock_irqsave(&kbd_event_lock, flags); */
+        unsigned long flags;
+        spin_lock_irqsave(&led_lock, flags);
         clr_vc_kbd_led(kbd, VC_SCROLLOCK);
         set_leds();
-/*      spin_unlock_irqrestore(&kbd_event_lock, flags); */
+        spin_unlock_irqrestore(&led_lock, flags);
 }
 
 /**
@@ -1104,21 +1105,15 @@ void vt_kbd_con_start(int console)
  *
  *      Handle console stop. This is a wrapper for the VT layer
  *      so that we can keep kbd knowledge internal
- *
- *      FIXME: We eventually need to hold the kbd lock here to protect
- *      the LED updating. We can't do it yet because fn_hold calls stop_tty
- *      and start_tty under the kbd_event_lock, while normal tty paths
- *      don't hold the lock. We probably need to split out an LED lock
- *      but not during an -rc release!
  */
 void vt_kbd_con_stop(int console)
 {
         struct kbd_struct * kbd = kbd_table + console;
-/*      unsigned long flags; */
-/*      spin_lock_irqsave(&kbd_event_lock, flags); */
+        unsigned long flags;
+        spin_lock_irqsave(&led_lock, flags);
         set_vc_kbd_led(kbd, VC_SCROLLOCK);
         set_leds();
-/*      spin_unlock_irqrestore(&kbd_event_lock, flags); */
+        spin_unlock_irqrestore(&led_lock, flags);
 }
 
 /*
@@ -1130,7 +1125,12 @@ void vt_kbd_con_stop(int console)
  */
 static void kbd_bh(unsigned long dummy)
 {
-        unsigned char leds = getleds();
+        unsigned char leds;
+        unsigned long flags;
+        
+        spin_lock_irqsave(&led_lock, flags);
+        leds = getleds();
+        spin_unlock_irqrestore(&led_lock, flags);
 
         if (leds != ledstate) {
                 input_handler_for_each_handle(&kbd_handler, &leds,
@@ -2035,11 +2035,11 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm)
                         return -EPERM;
                 if (arg & ~0x77)
                         return -EINVAL;
-                spin_lock_irqsave(&kbd_event_lock, flags);
+                spin_lock_irqsave(&led_lock, flags);
                 kbd->ledflagstate = (arg & 7);
                 kbd->default_ledflagstate = ((arg >> 4) & 7);
                 set_leds();
-                spin_unlock_irqrestore(&kbd_event_lock, flags);
+                spin_unlock_irqrestore(&led_lock, flags);
                 return 0;
 
         /* the ioctls below only set the lights, not the functions */
@@ -2134,8 +2134,10 @@ void vt_reset_keyboard(int console)
         clr_vc_kbd_mode(kbd, VC_CRLF);
         kbd->lockstate = 0;
         kbd->slockstate = 0;
+        spin_lock(&led_lock);
         kbd->ledmode = LED_SHOW_FLAGS;
         kbd->ledflagstate = kbd->default_ledflagstate;
+        spin_unlock(&led_lock);
         /* do not do set_leds here because this causes an endless tasklet loop
            when the keyboard hasn't been initialized yet */
         spin_unlock_irqrestore(&kbd_event_lock, flags);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 84cbf298c094..999ca63afdef 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -537,45 +537,27 @@ void complement_pos(struct vc_data *vc, int offset)
 
 static void insert_char(struct vc_data *vc, unsigned int nr)
 {
-        unsigned short *p, *q = (unsigned short *)vc->vc_pos;
+        unsigned short *p = (unsigned short *) vc->vc_pos;
 
-        p = q + vc->vc_cols - nr - vc->vc_x;
-        while (--p >= q)
-                scr_writew(scr_readw(p), p + nr);
-        scr_memsetw(q, vc->vc_video_erase_char, nr * 2);
+        scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x);
+        scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
         vc->vc_need_wrap = 0;
-        if (DO_UPDATE(vc)) {
-                unsigned short oldattr = vc->vc_attr;
-                vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x, vc->vc_y, vc->vc_x + nr, 1,
-                                     vc->vc_cols - vc->vc_x - nr);
-                vc->vc_attr = vc->vc_video_erase_char >> 8;
-                while (nr--)
-                        vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y, vc->vc_x + nr);
-                vc->vc_attr = oldattr;
-        }
+        if (DO_UPDATE(vc))
+                do_update_region(vc, (unsigned long) p,
+                        (vc->vc_cols - vc->vc_x) / 2 + 1);
 }
 
 static void delete_char(struct vc_data *vc, unsigned int nr)
 {
-        unsigned int i = vc->vc_x;
-        unsigned short *p = (unsigned short *)vc->vc_pos;
+        unsigned short *p = (unsigned short *) vc->vc_pos;
 
-        while (++i <= vc->vc_cols - nr) {
-                scr_writew(scr_readw(p+nr), p);
-                p++;
-        }
-        scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
+        scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr);
+        scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char,
+                        nr * 2);
         vc->vc_need_wrap = 0;
-        if (DO_UPDATE(vc)) {
-                unsigned short oldattr = vc->vc_attr;
-                vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x + nr, vc->vc_y, vc->vc_x, 1,
-                                     vc->vc_cols - vc->vc_x - nr);
-                vc->vc_attr = vc->vc_video_erase_char >> 8;
-                while (nr--)
-                        vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y,
-                                     vc->vc_cols - 1 - nr);
-                vc->vc_attr = oldattr;
-        }
+        if (DO_UPDATE(vc))
+                do_update_region(vc, (unsigned long) p,
+                        (vc->vc_cols - vc->vc_x) / 2);
 }
 
 static int softcursor_original;
@@ -1172,45 +1154,26 @@ static void csi_J(struct vc_data *vc, int vpar)
                 case 0: /* erase from cursor to end of display */
                         count = (vc->vc_scr_end - vc->vc_pos) >> 1;
                         start = (unsigned short *)vc->vc_pos;
-                        if (DO_UPDATE(vc)) {
-                                /* do in two stages */
-                                vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1,
-                                              vc->vc_cols - vc->vc_x);
-                                vc->vc_sw->con_clear(vc, vc->vc_y + 1, 0,
-                                              vc->vc_rows - vc->vc_y - 1,
-                                              vc->vc_cols);
-                        }
                         break;
                 case 1: /* erase from start to cursor */
                         count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
                         start = (unsigned short *)vc->vc_origin;
-                        if (DO_UPDATE(vc)) {
-                                /* do in two stages */
-                                vc->vc_sw->con_clear(vc, 0, 0, vc->vc_y,
-                                              vc->vc_cols);
-                                vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
-                                              vc->vc_x + 1);
-                        }
                         break;
                 case 3: /* erase scroll-back buffer (and whole display) */
                         scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
                                     vc->vc_screenbuf_size >> 1);
                         set_origin(vc);
-                        if (CON_IS_VISIBLE(vc))
-                                update_screen(vc);
                         /* fall through */
                 case 2: /* erase whole display */
                         count = vc->vc_cols * vc->vc_rows;
                         start = (unsigned short *)vc->vc_origin;
-                        if (DO_UPDATE(vc))
-                                vc->vc_sw->con_clear(vc, 0, 0,
-                                              vc->vc_rows,
-                                              vc->vc_cols);
                         break;
                 default:
                         return;
         }
         scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
+        if (DO_UPDATE(vc))
+                do_update_region(vc, (unsigned long) start, count);
         vc->vc_need_wrap = 0;
 }
 
@@ -1223,29 +1186,22 @@ static void csi_K(struct vc_data *vc, int vpar)
                 case 0: /* erase from cursor to end of line */
                         count = vc->vc_cols - vc->vc_x;
                         start = (unsigned short *)vc->vc_pos;
-                        if (DO_UPDATE(vc))
-                                vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1,
-                                                     vc->vc_cols - vc->vc_x);
                         break;
                 case 1: /* erase from start of line to cursor */
                         start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
                         count = vc->vc_x + 1;
-                        if (DO_UPDATE(vc))
-                                vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
-                                                     vc->vc_x + 1);
                         break;
                 case 2: /* erase whole line */
                         start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
                         count = vc->vc_cols;
-                        if (DO_UPDATE(vc))
-                                vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
-                                              vc->vc_cols);
                         break;
                 default:
                         return;
         }
         scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
         vc->vc_need_wrap = 0;
+        if (DO_UPDATE(vc))
+                do_update_region(vc, (unsigned long) start, count);
 }
 
 static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar positions */
@@ -1380,7 +1336,7 @@ static void respond_string(const char *p, struct tty_struct *tty)
                 tty_insert_flip_char(tty, *p, 0);
                 p++;
         }
-        con_schedule_flip(tty);
+        tty_schedule_flip(tty);
 }
 
 static void cursor_report(struct vc_data *vc, struct tty_struct *tty)
@@ -2792,41 +2748,52 @@ static void con_flush_chars(struct tty_struct *tty)
 /*
  * Allocate the console screen memory.
  */
-static int con_open(struct tty_struct *tty, struct file *filp)
+static int con_install(struct tty_driver *driver, struct tty_struct *tty)
 {
         unsigned int currcons = tty->index;
-        int ret = 0;
+        struct vc_data *vc;
+        int ret;
 
         console_lock();
-        if (tty->driver_data == NULL) {
-                ret = vc_allocate(currcons);
-                if (ret == 0) {
-                        struct vc_data *vc = vc_cons[currcons].d;
+        ret = vc_allocate(currcons);
+        if (ret)
+                goto unlock;
 
-                        /* Still being freed */
-                        if (vc->port.tty) {
-                                console_unlock();
-                                return -ERESTARTSYS;
-                        }
-                        tty->driver_data = vc;
-                        vc->port.tty = tty;
+        vc = vc_cons[currcons].d;
 
-                        if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
-                                tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
-                                tty->winsize.ws_col = vc_cons[currcons].d->vc_cols;
-                        }
-                        if (vc->vc_utf)
-                                tty->termios->c_iflag |= IUTF8;
-                        else
-                                tty->termios->c_iflag &= ~IUTF8;
-                        console_unlock();
-                        return ret;
-                }
+        /* Still being freed */
+        if (vc->port.tty) {
+                ret = -ERESTARTSYS;
+                goto unlock;
         }
+
+        ret = tty_port_install(&vc->port, driver, tty);
+        if (ret)
+                goto unlock;
+
+        tty->driver_data = vc;
+        vc->port.tty = tty;
+
+        if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
+                tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
+                tty->winsize.ws_col = vc_cons[currcons].d->vc_cols;
+        }
+        if (vc->vc_utf)
+                tty->termios.c_iflag |= IUTF8;
+        else
+                tty->termios.c_iflag &= ~IUTF8;
+unlock:
         console_unlock();
         return ret;
 }
 
+static int con_open(struct tty_struct *tty, struct file *filp)
+{
+        /* everything done in install */
+        return 0;
+}
+
+
 static void con_close(struct tty_struct *tty, struct file *filp)
 {
         /* Nothing to do - we defer to shutdown */
@@ -2839,7 +2806,6 @@ static void con_shutdown(struct tty_struct *tty)
         console_lock();
         vc->port.tty = NULL;
         console_unlock();
-        tty_shutdown(tty);
 }
 
 static int default_italic_color    = 2; // green (ASCII)
@@ -2947,6 +2913,7 @@ static int __init con_init(void)
 console_initcall(con_init);
 
 static const struct tty_operations con_ops = {
+        .install = con_install,
         .open = con_open,
         .close = con_close,
         .write = con_write,
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f763ed7ba91e..ff7b5a8d501c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -826,7 +826,7 @@ static void acm_tty_set_termios(struct tty_struct *tty,
                                                 struct ktermios *termios_old)
 {
         struct acm *acm = tty->driver_data;
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         struct usb_cdc_line_coding newline;
         int newctrl = acm->ctrlout;
 
@@ -1299,7 +1299,8 @@ skip_countries:
         usb_set_intfdata(data_interface, acm);
 
         usb_get_intf(control_interface);
-        tty_register_device(acm_tty_driver, minor, &control_interface->dev);
+        tty_port_register_device(&acm->port, acm_tty_driver, minor,
+                        &control_interface->dev);
 
         return 0;
 alloc_fail7:
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index da6d479ff9a6..f1739526820f 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1133,7 +1133,8 @@ int gserial_setup(struct usb_gadget *g, unsigned count)
         for (i = 0; i < count; i++) {
                 struct device   *tty_dev;
 
-                tty_dev = tty_register_device(gs_tty_driver, i, &g->dev);
+                tty_dev = tty_port_register_device(&ports[i].port->port,
+                                gs_tty_driver, i, &g->dev);
                 if (IS_ERR(tty_dev))
                         pr_warning("%s: no classdev for port %d, err %ld\n",
                                 __func__, i, PTR_ERR(tty_dev));
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index f8ce97d8b0ad..3b98fb733362 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -215,7 +215,7 @@ static void ark3116_release(struct usb_serial *serial)
 
 static void ark3116_init_termios(struct tty_struct *tty)
 {
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         *termios = tty_std_termios;
         termios->c_cflag = B9600 | CS8
                                       | CREAD | HUPCL | CLOCAL;
@@ -229,7 +229,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
 {
         struct usb_serial *serial = port->serial;
         struct ark3116_private *priv = usb_get_serial_port_data(port);
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         unsigned int cflag = termios->c_cflag;
         int bps = tty_get_baud_rate(tty);
         int quot;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 6b7365632951..a46df73ee96e 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -307,7 +307,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
         unsigned long control_state;
         int bad_flow_control;
         speed_t baud;
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
 
         iflag = termios->c_iflag;
         cflag = termios->c_cflag;
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index b9cca6dcde07..9a564286bfd7 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -165,8 +165,8 @@ static int usb_console_setup(struct console *co, char *options)
                 }
 
                 if (serial->type->set_termios) {
-                        tty->termios->c_cflag = cflag;
-                        tty_termios_encode_baud_rate(tty->termios, baud, baud);
+                        tty->termios.c_cflag = cflag;
+                        tty_termios_encode_baud_rate(&tty->termios, baud, baud);
                         memset(&dummy, 0, sizeof(struct ktermios));
                         serial->type->set_termios(tty, port, &dummy);
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 1e71079ce33b..ba5e07e188a0 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -469,7 +469,7 @@ static void cp210x_get_termios(struct tty_struct *tty,
 
         if (tty) {
                 cp210x_get_termios_port(tty->driver_data,
-                        &tty->termios->c_cflag, &baud);
+                        &tty->termios.c_cflag, &baud);
                 tty_encode_baud_rate(tty, baud, baud);
         }
 
@@ -631,7 +631,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
 {
         u32 baud;
 
-        baud = tty->termios->c_ospeed;
+        baud = tty->termios.c_ospeed;
 
         /* This maps the requested rate to a rate valid on cp2102 or cp2103,
          * or to an arbitrary rate in [1M,2M].
@@ -665,10 +665,10 @@ static void cp210x_set_termios(struct tty_struct *tty,
         if (!tty)
                 return;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
         old_cflag = old_termios->c_cflag;
 
-        if (tty->termios->c_ospeed != old_termios->c_ospeed)
+        if (tty->termios.c_ospeed != old_termios->c_ospeed)
                 cp210x_change_speed(tty, port, old_termios);
 
         /* If the number of data bits is to be updated */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index b78c34eb5d3f..be34f153e566 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -922,38 +922,38 @@ static void cypress_set_termios(struct tty_struct *tty,
            early enough */
         if (!priv->termios_initialized) {
                 if (priv->chiptype == CT_EARTHMATE) {
-                        *(tty->termios) = tty_std_termios;
-                        tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
+                        tty->termios = tty_std_termios;
+                        tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
                                 CLOCAL;
-                        tty->termios->c_ispeed = 4800;
-                        tty->termios->c_ospeed = 4800;
+                        tty->termios.c_ispeed = 4800;
+                        tty->termios.c_ospeed = 4800;
                 } else if (priv->chiptype == CT_CYPHIDCOM) {
-                        *(tty->termios) = tty_std_termios;
-                        tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+                        tty->termios = tty_std_termios;
+                        tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
                                 CLOCAL;
-                        tty->termios->c_ispeed = 9600;
-                        tty->termios->c_ospeed = 9600;
+                        tty->termios.c_ispeed = 9600;
+                        tty->termios.c_ospeed = 9600;
                 } else if (priv->chiptype == CT_CA42V2) {
-                        *(tty->termios) = tty_std_termios;
-                        tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+                        tty->termios = tty_std_termios;
+                        tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
                                 CLOCAL;
-                        tty->termios->c_ispeed = 9600;
-                        tty->termios->c_ospeed = 9600;
+                        tty->termios.c_ispeed = 9600;
+                        tty->termios.c_ospeed = 9600;
                 }
                 priv->termios_initialized = 1;
         }
         spin_unlock_irqrestore(&priv->lock, flags);
 
         /* Unsupported features need clearing */
-        tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
+        tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
 
-        cflag = tty->termios->c_cflag;
-        iflag = tty->termios->c_iflag;
+        cflag = tty->termios.c_cflag;
+        iflag = tty->termios.c_iflag;
 
         /* check if there are new settings */
         if (old_termios) {
                 spin_lock_irqsave(&priv->lock, flags);
-                priv->tmp_termios = *(tty->termios);
+                priv->tmp_termios = tty->termios;
                 spin_unlock_irqrestore(&priv->lock, flags);
         }
 
@@ -1021,7 +1021,7 @@ static void cypress_set_termios(struct tty_struct *tty,
                                 "4800bps.");
                 /* define custom termios settings for NMEA protocol */
 
-                tty->termios->c_iflag /* input modes - */
+                tty->termios.c_iflag /* input modes - */
                         &= ~(IGNBRK  /* disable ignore break */
                         | BRKINT     /* disable break causes interrupt */
                         | PARMRK     /* disable mark parity errors */
@@ -1031,10 +1031,10 @@ static void cypress_set_termios(struct tty_struct *tty,
                         | ICRNL      /* disable translate CR to NL */
                         | IXON);     /* disable enable XON/XOFF flow control */
 
-                tty->termios->c_oflag /* output modes */
+                tty->termios.c_oflag /* output modes */
                         &= ~OPOST;    /* disable postprocess output char */
 
-                tty->termios->c_lflag /* line discipline modes */
+                tty->termios.c_lflag /* line discipline modes */
                         &= ~(ECHO     /* disable echo input characters */
                         | ECHONL      /* disable echo new line */
                         | ICANON      /* disable erase, kill, werase, and rprnt
@@ -1200,7 +1200,7 @@ static void cypress_read_int_callback(struct urb *urb)
 
         /* hangup, as defined in acm.c... this might be a bad place for it
          * though */
-        if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+        if (tty && !(tty->termios.c_cflag & CLOCAL) &&
                         !(priv->current_status & UART_CD)) {
                 dbg("%s - calling hangup", __func__);
                 tty_hangup(tty);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b5cd838093ef..afd9d2ec577b 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -687,8 +687,8 @@ static void digi_set_termios(struct tty_struct *tty,
                 struct usb_serial_port *port, struct ktermios *old_termios)
 {
         struct digi_port *priv = usb_get_serial_port_data(port);
-        unsigned int iflag = tty->termios->c_iflag;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int iflag = tty->termios.c_iflag;
+        unsigned int cflag = tty->termios.c_cflag;
         unsigned int old_iflag = old_termios->c_iflag;
         unsigned int old_cflag = old_termios->c_cflag;
         unsigned char buf[32];
@@ -709,7 +709,7 @@ static void digi_set_termios(struct tty_struct *tty,
                         /* don't set RTS if using hardware flow control */
                         /* and throttling input */
                         modem_signals = TIOCM_DTR;
-                        if (!(tty->termios->c_cflag & CRTSCTS) ||
+                        if (!(tty->termios.c_cflag & CRTSCTS) ||
                             !test_bit(TTY_THROTTLED, &tty->flags))
                                 modem_signals |= TIOCM_RTS;
                         digi_set_modem_signals(port, modem_signals, 1);
@@ -748,7 +748,7 @@ static void digi_set_termios(struct tty_struct *tty,
                 }
         }
         /* set parity */
-        tty->termios->c_cflag &= ~CMSPAR;
+        tty->termios.c_cflag &= ~CMSPAR;
 
         if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
                 if (cflag&PARENB) {
@@ -1124,8 +1124,8 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 
         /* set termios settings */
         if (tty) {
-                not_termios.c_cflag = ~tty->termios->c_cflag;
-                not_termios.c_iflag = ~tty->termios->c_iflag;
+                not_termios.c_cflag = ~tty->termios.c_cflag;
+                not_termios.c_iflag = ~tty->termios.c_iflag;
                 digi_set_termios(tty, port, &not_termios);
         }
         return 0;
@@ -1500,7 +1500,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
                 rts = 0;
                 if (tty)
-                        rts = tty->termios->c_cflag & CRTSCTS;
+                        rts = tty->termios.c_cflag & CRTSCTS;
                 
                 if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
                         spin_lock(&priv->dp_port_lock);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index cdf61dd07318..34e86383090a 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -87,7 +87,7 @@ static int empeg_startup(struct usb_serial *serial)
 
 static void empeg_init_termios(struct tty_struct *tty)
 {
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
 
         /*
          * The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 499b15fd82f1..79451ee12ca0 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -173,10 +173,11 @@ static void f81232_set_termios(struct tty_struct *tty,
         /* FIXME - Stubbed out for now */
 
         /* Don't change anything if nothing has changed */
-        if (!tty_termios_hw_change(tty->termios, old_termios))
+        if (!tty_termios_hw_change(&tty->termios, old_termios))
                 return;
 
         /* Do the real work here... */
+        tty_termios_copy_hw(&tty->termios, old_termios);
 }
 
 static int f81232_tiocmget(struct tty_struct *tty)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f906b3aec217..0c8d1c226273 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2102,7 +2102,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 {
         struct usb_device *dev = port->serial->dev;
         struct ftdi_private *priv = usb_get_serial_port_data(port);
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         unsigned int cflag = termios->c_cflag;
         __u16 urb_value; /* will hold the new flags */
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e1f5ccd1e8f8..f435575c4e6e 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1458,7 +1458,7 @@ static void edge_throttle(struct tty_struct *tty)
         }
 
         /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 edge_port->shadowMCR &= ~MCR_RTS;
                 status = send_cmd_write_uart_register(edge_port, MCR,
                                                         edge_port->shadowMCR);
@@ -1497,7 +1497,7 @@ static void edge_unthrottle(struct tty_struct *tty)
                         return;
         }
         /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 edge_port->shadowMCR |= MCR_RTS;
                 send_cmd_write_uart_register(edge_port, MCR,
                                                 edge_port->shadowMCR);
@@ -1516,9 +1516,9 @@ static void edge_set_termios(struct tty_struct *tty,
         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
         unsigned int cflag;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
         dbg("%s - clfag %08x iflag %08x", __func__,
-            tty->termios->c_cflag, tty->termios->c_iflag);
+            tty->termios.c_cflag, tty->termios.c_iflag);
         dbg("%s - old clfag %08x old iflag %08x", __func__,
             old_termios->c_cflag, old_termios->c_iflag);
 
@@ -1987,7 +1987,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
                 tty = tty_port_tty_get(&edge_port->port->port);
                 if (tty) {
                         change_port_settings(tty,
-                                edge_port, tty->termios);
+                                edge_port, &tty->termios);
                         tty_kref_put(tty);
                 }
 
@@ -2570,7 +2570,7 @@ static void change_port_settings(struct tty_struct *tty,
                 return;
         }
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         switch (cflag & CSIZE) {
         case CS5:
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 3936904c6419..765978ae752e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1870,7 +1870,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 
         /* set up the port settings */
         if (tty)
-                edge_set_termios(tty, port, tty->termios);
+                edge_set_termios(tty, port, &tty->termios);
 
         /* open up the port */
 
@@ -2272,13 +2272,13 @@ static void change_port_settings(struct tty_struct *tty,
 
         config = kmalloc (sizeof (*config), GFP_KERNEL);
         if (!config) {
-                *tty->termios = *old_termios;
+                tty->termios = *old_termios;
                 dev_err(&edge_port->port->dev, "%s - out of memory\n",
                                                                 __func__);
                 return;
         }
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         config->wFlags = 0;
 
@@ -2362,7 +2362,7 @@ static void change_port_settings(struct tty_struct *tty,
         } else
                 dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
 
-        tty->termios->c_cflag &= ~CMSPAR;
+        tty->termios.c_cflag &= ~CMSPAR;
 
         /* Round the baud rate */
         baud = tty_get_baud_rate(tty);
@@ -2408,10 +2408,10 @@ static void edge_set_termios(struct tty_struct *tty,
         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
         unsigned int cflag;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         dbg("%s - clfag %08x iflag %08x", __func__,
-            tty->termios->c_cflag, tty->termios->c_iflag);
+            tty->termios.c_cflag, tty->termios.c_iflag);
         dbg("%s - old clfag %08x old iflag %08x", __func__,
             old_termios->c_cflag, old_termios->c_iflag);
         dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index fc09414c960f..5a96692b12a2 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -381,7 +381,7 @@ static void ir_set_termios(struct tty_struct *tty,
                 ir_xbof = ir_xbof_change(xbof) ;
 
         /* Only speed changes are supported */
-        tty_termios_copy_hw(tty->termios, old_termios);
+        tty_termios_copy_hw(&tty->termios, old_termios);
         tty_encode_baud_rate(tty, baud, baud);
 
         /*
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 22b1eb5040b7..bf3864045c18 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -921,7 +921,7 @@ static void iuu_set_termios(struct tty_struct *tty,
 {
         const u32 supported_mask = CMSPAR|PARENB|PARODD;
         struct iuu_private *priv = usb_get_serial_port_data(port);
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
         int status;
         u32 actual;
         u32 parity;
@@ -930,7 +930,7 @@ static void iuu_set_termios(struct tty_struct *tty,
         u32 newval = cflag & supported_mask;
 
         /* Just use the ospeed. ispeed should be the same. */
-        baud = tty->termios->c_ospeed;
+        baud = tty->termios.c_ospeed;
 
         dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
 
@@ -961,13 +961,13 @@ static void iuu_set_termios(struct tty_struct *tty,
          * settings back over and then adjust them
          */
         if (old_termios)
-                tty_termios_copy_hw(tty->termios, old_termios);
+                tty_termios_copy_hw(&tty->termios, old_termios);
         if (status != 0)        /* Set failed - return old bits */
                 return;
         /* Re-encode speed, parity and csize */
         tty_encode_baud_rate(tty, baud, baud);
-        tty->termios->c_cflag &= ~(supported_mask|CSIZE);
-        tty->termios->c_cflag |= newval | csize;
+        tty->termios.c_cflag &= ~(supported_mask|CSIZE);
+        tty->termios.c_cflag |= newval | csize;
 }
 
 static void iuu_close(struct usb_serial_port *port)
@@ -993,14 +993,14 @@ static void iuu_close(struct usb_serial_port *port)
 
 static void iuu_init_termios(struct tty_struct *tty)
 {
-        *(tty->termios) = tty_std_termios;
-        tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+        tty->termios = tty_std_termios;
+        tty->termios.c_cflag = CLOCAL | CREAD | CS8 | B9600
                                 | TIOCM_CTS | CSTOPB | PARENB;
-        tty->termios->c_ispeed = 9600;
-        tty->termios->c_ospeed = 9600;
-        tty->termios->c_lflag = 0;
-        tty->termios->c_oflag = 0;
-        tty->termios->c_iflag = 0;
+        tty->termios.c_ispeed = 9600;
+        tty->termios.c_ospeed = 9600;
+        tty->termios.c_lflag = 0;
+        tty->termios.c_oflag = 0;
+        tty->termios.c_iflag = 0;
 }
 
 static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -1012,8 +1012,8 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
         u32 actual;
         struct iuu_private *priv = usb_get_serial_port_data(port);
 
-        baud = tty->termios->c_ospeed;
-        tty->termios->c_ispeed = baud;
+        baud = tty->termios.c_ospeed;
+        tty->termios.c_ispeed = baud;
         /* Re-encode speed */
         tty_encode_baud_rate(tty, baud, baud);
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index af0b70eaf032..7bcbb47e1449 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -158,7 +158,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
 
         p_priv = usb_get_serial_port_data(port);
         d_details = p_priv->device_details;
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
         device_port = port->number - port->serial->minor;
 
         /* Baud rate calculation takes baud rate as an integer
@@ -179,7 +179,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
         p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
 
         /* Mark/Space not supported */
-        tty->termios->c_cflag &= ~CMSPAR;
+        tty->termios.c_cflag &= ~CMSPAR;
 
         keyspan_send_setup(port, 0);
 }
@@ -1086,7 +1086,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 
         device_port = port->number - port->serial->minor;
         if (tty) {
-                cflag = tty->termios->c_cflag;
+                cflag = tty->termios.c_cflag;
                 /* Baud rate calculation takes baud rate as an integer
                    so other rates can be generated if desired. */
                 baud_rate = tty_get_baud_rate(tty);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index a4ac3cfeffc4..dcada8615fcf 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -338,7 +338,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
            7[EOMS]1: 10 bit, b0/b7 is parity
            7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
 
-           HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS
+           HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
            bit.
 
            For now, just do baud. */
@@ -353,7 +353,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
         }
         /* Only speed can change so copy the old h/w parameters
            then encode the new speed */
-        tty_termios_copy_hw(tty->termios, old_termios);
+        tty_termios_copy_hw(&tty->termios, old_termios);
         tty_encode_baud_rate(tty, speed, speed);
 }
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 5bed59cd5776..def9ad258715 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -311,12 +311,12 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 
         /* set up termios structure */
         spin_lock_irqsave(&priv->lock, flags);
-        priv->termios.c_iflag = tty->termios->c_iflag;
-        priv->termios.c_oflag = tty->termios->c_oflag;
-        priv->termios.c_cflag = tty->termios->c_cflag;
-        priv->termios.c_lflag = tty->termios->c_lflag;
+        priv->termios.c_iflag = tty->termios.c_iflag;
+        priv->termios.c_oflag = tty->termios.c_oflag;
+        priv->termios.c_cflag = tty->termios.c_cflag;
+        priv->termios.c_lflag = tty->termios.c_lflag;
         for (i = 0; i < NCCS; i++)
-                priv->termios.c_cc[i] = tty->termios->c_cc[i];
+                priv->termios.c_cc[i] = tty->termios.c_cc[i];
         priv->cfg.pktlen   = cfg->pktlen;
         priv->cfg.baudrate = cfg->baudrate;
         priv->cfg.databits = cfg->databits;
@@ -445,9 +445,9 @@ static void klsi_105_set_termios(struct tty_struct *tty,
                                  struct ktermios *old_termios)
 {
         struct klsi_105_private *priv = usb_get_serial_port_data(port);
-        unsigned int iflag = tty->termios->c_iflag;
+        unsigned int iflag = tty->termios.c_iflag;
         unsigned int old_iflag = old_termios->c_iflag;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
         unsigned int old_cflag = old_termios->c_cflag;
         struct klsi_105_port_settings *cfg;
         unsigned long flags;
@@ -560,7 +560,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
         if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
             || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
                 /* Not currently supported */
-                tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
+                tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
 #if 0
                 priv->last_lcr = 0;
 
@@ -587,7 +587,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
             || (iflag & IXON) != (old_iflag & IXON)
             ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
                 /* Not currently supported */
-                tty->termios->c_cflag &= ~CRTSCTS;
+                tty->termios.c_cflag &= ~CRTSCTS;
                 /* Drop DTR/RTS if no flow control otherwise assert */
 #if 0
                 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index fafeabb64c55..bf5c74965d34 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -191,11 +191,11 @@ static void kobil_release(struct usb_serial *serial)
 static void kobil_init_termios(struct tty_struct *tty)
 {
         /* Default to echo off and other sane device settings */
-        tty->termios->c_lflag = 0;
-        tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
-        tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+        tty->termios.c_lflag = 0;
+        tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+        tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF;
         /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
-        tty->termios->c_oflag &= ~ONLCR;
+        tty->termios.c_oflag &= ~ONLCR;
 }
 
 static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -581,14 +581,14 @@ static void kobil_set_termios(struct tty_struct *tty,
         struct kobil_private *priv;
         int result;
         unsigned short urb_val = 0;
-        int c_cflag = tty->termios->c_cflag;
+        int c_cflag = tty->termios.c_cflag;
         speed_t speed;
 
         priv = usb_get_serial_port_data(port);
         if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
                         priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
                 /* This device doesn't support ioctl calls */
-                *tty->termios = *old;
+                tty_termios_copy_hw(&tty->termios, old);
                 return;
         }
 
@@ -612,7 +612,7 @@ static void kobil_set_termios(struct tty_struct *tty,
                         urb_val |= SUSBCR_SPASB_EvenParity;
         } else
                 urb_val |= SUSBCR_SPASB_NoParity;
-        tty->termios->c_cflag &= ~CMSPAR;
+        tty->termios.c_cflag &= ~CMSPAR;
         tty_encode_baud_rate(tty, speed, speed);
 
         result = usb_control_msg(port->serial->dev,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index a71fa0aa0406..df98cffdba65 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -454,7 +454,7 @@ static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
          * either.
          */
         spin_lock_irqsave(&priv->lock, flags);
-        if (tty && (tty->termios->c_cflag & CBAUD))
+        if (tty && (tty->termios.c_cflag & CBAUD))
                 priv->control_state = TIOCM_DTR | TIOCM_RTS;
         else
                 priv->control_state = 0;
@@ -634,7 +634,7 @@ static void mct_u232_set_termios(struct tty_struct *tty,
 {
         struct usb_serial *serial = port->serial;
         struct mct_u232_private *priv = usb_get_serial_port_data(port);
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         unsigned int cflag = termios->c_cflag;
         unsigned int old_cflag = old_termios->c_cflag;
         unsigned long flags;
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index d47eb06fe463..2b0627b5fe2c 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -130,12 +130,6 @@ static void metrousb_read_int_callback(struct urb *urb)
 
         /* Set the data read from the usb port into the serial port buffer. */
         tty = tty_port_tty_get(&port->port);
-        if (!tty) {
-                dev_err(&port->dev, "%s - bad tty pointer - exiting\n",
-                        __func__);
-                return;
-        }
-
         if (tty && urb->actual_length) {
                 /* Loop through the data copying each byte to the tty layer. */
                 tty_insert_flip_string(tty, data, urb->actual_length);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index a07dd3c8cfef..012f67b2e4cc 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1349,7 +1349,7 @@ static void mos7720_throttle(struct tty_struct *tty)
         }
 
         /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 mos7720_port->shadowMCR &= ~UART_MCR_RTS;
                 write_mos_reg(port->serial, port->number - port->serial->minor,
                               MCR, mos7720_port->shadowMCR);
@@ -1383,7 +1383,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
         }
 
         /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 mos7720_port->shadowMCR |= UART_MCR_RTS;
                 write_mos_reg(port->serial, port->number - port->serial->minor,
                               MCR, mos7720_port->shadowMCR);
@@ -1604,8 +1604,8 @@ static void change_port_settings(struct tty_struct *tty,
         lStop = 0x00;   /* 1 stop bit */
         lParity = 0x00; /* No parity */
 
-        cflag = tty->termios->c_cflag;
-        iflag = tty->termios->c_iflag;
+        cflag = tty->termios.c_cflag;
+        iflag = tty->termios.c_iflag;
 
         /* Change the number of bits */
         switch (cflag & CSIZE) {
@@ -1753,11 +1753,11 @@ static void mos7720_set_termios(struct tty_struct *tty,
 
         dbg("%s\n", "setting termios - ASPIRE");
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         dbg("%s - cflag %08x iflag %08x", __func__,
-            tty->termios->c_cflag,
-            RELEVANT_IFLAG(tty->termios->c_iflag));
+            tty->termios.c_cflag,
+            RELEVANT_IFLAG(tty->termios.c_iflag));
 
         dbg("%s - old cflag %08x old iflag %08x", __func__,
             old_termios->c_cflag,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2f6da1e89bfa..402c32d7accb 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1651,7 +1651,7 @@ static void mos7840_throttle(struct tty_struct *tty)
                         return;
         }
         /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 mos7840_port->shadowMCR &= ~MCR_RTS;
                 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
                                          mos7840_port->shadowMCR);
@@ -1694,7 +1694,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
         }
 
         /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 mos7840_port->shadowMCR |= MCR_RTS;
                 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
                                          mos7840_port->shadowMCR);
@@ -2000,8 +2000,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
         lStop = LCR_STOP_1;
         lParity = LCR_PAR_NONE;
 
-        cflag = tty->termios->c_cflag;
-        iflag = tty->termios->c_iflag;
+        cflag = tty->termios.c_cflag;
+        iflag = tty->termios.c_iflag;
 
         /* Change the number of bits */
         if (cflag & CSIZE) {
@@ -2161,10 +2161,10 @@ static void mos7840_set_termios(struct tty_struct *tty,
 
         dbg("%s", "setting termios - ");
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         dbg("%s - clfag %08x iflag %08x", __func__,
-            tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
+            tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
         dbg("%s - old clfag %08x old iflag %08x", __func__,
             old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
         dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 5976b65ab6ee..9f555560bfbf 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -404,10 +404,10 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
 
 static void oti6858_init_termios(struct tty_struct *tty)
 {
-        *(tty->termios) = tty_std_termios;
-        tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
-        tty->termios->c_ispeed = 38400;
-        tty->termios->c_ospeed = 38400;
+        tty->termios = tty_std_termios;
+        tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+        tty->termios.c_ispeed = 38400;
+        tty->termios.c_ospeed = 38400;
 }
 
 static void oti6858_set_termios(struct tty_struct *tty,
@@ -425,7 +425,7 @@ static void oti6858_set_termios(struct tty_struct *tty,
                 return;
         }
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         spin_lock_irqsave(&priv->lock, flags);
         divisor = priv->pending_setup.divisor;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 13b8dd6481f5..2b9108a8ea64 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -260,16 +260,16 @@ static void pl2303_set_termios(struct tty_struct *tty,
            serial settings even to the same values as before. Thus
            we actually need to filter in this specific case */
 
-        if (!tty_termios_hw_change(tty->termios, old_termios))
+        if (!tty_termios_hw_change(&tty->termios, old_termios))
                 return;
 
-        cflag = tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         buf = kzalloc(7, GFP_KERNEL);
         if (!buf) {
                 dev_err(&port->dev, "%s - out of memory.\n", __func__);
                 /* Report back no change occurred */
-                *tty->termios = *old_termios;
+                tty->termios = *old_termios;
                 return;
         }
 
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 151670b6b72a..7df9cdb053ed 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -275,7 +275,7 @@ static void qt2_set_termios(struct tty_struct *tty,
 {
         struct usb_device *dev = port->serial->dev;
         struct qt2_port_private *port_priv;
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         u16 baud;
         unsigned int cflag = termios->c_cflag;
         u16 new_lcr = 0;
@@ -406,7 +406,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
         port_priv->device_port = (u8) device_port;
 
         if (tty)
-                qt2_set_termios(tty, port, tty->termios);
+                qt2_set_termios(tty, port, &tty->termios);
 
         return 0;
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 0274710cced5..b14ebbd73567 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -382,7 +382,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
 static void sierra_set_termios(struct tty_struct *tty,
                 struct usb_serial_port *port, struct ktermios *old_termios)
 {
-        tty_termios_copy_hw(tty->termios, old_termios);
+        tty_termios_copy_hw(&tty->termios, old_termios);
         sierra_send_setup(port);
 }
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index cad608984710..ab68a4d74d61 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -316,10 +316,10 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 static void spcp8x5_init_termios(struct tty_struct *tty)
 {
         /* for the 1st time call this function */
-        *(tty->termios) = tty_std_termios;
-        tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
-        tty->termios->c_ispeed = 115200;
-        tty->termios->c_ospeed = 115200;
+        tty->termios = tty_std_termios;
+        tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+        tty->termios.c_ispeed = 115200;
+        tty->termios.c_ospeed = 115200;
 }
 
 /* set the serial param for transfer. we should check if we really need to
@@ -330,7 +330,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
         struct usb_serial *serial = port->serial;
         struct spcp8x5_private *priv = usb_get_serial_port_data(port);
         unsigned long flags;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
         unsigned int old_cflag = old_termios->c_cflag;
         unsigned short uartdata;
         unsigned char buf[2] = {0, 0};
@@ -340,7 +340,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 
 
         /* check that they really want us to change something */
-        if (!tty_termios_hw_change(tty->termios, old_termios))
+        if (!tty_termios_hw_change(&tty->termios, old_termios))
                 return;
 
         /* set DTR/RTS active */
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 3fee23bf0c14..cf2d30cf7588 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -216,7 +216,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
                                struct ktermios *old_termios)
 {
         struct usb_device *dev = port->serial->dev;
-        struct ktermios *termios = tty->termios;
+        struct ktermios *termios = &tty->termios;
         u16 baud, divisor, remainder;
         unsigned int cflag = termios->c_cflag;
         u16 urb_value = 0; /* will hold the new flags */
@@ -322,7 +322,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
                 dbg("%s - set uart failed", __func__);
 
         if (tty)
-                ssu100_set_termios(tty, port, tty->termios);
+                ssu100_set_termios(tty, port, &tty->termios);
 
         return usb_serial_generic_open(tty, port);
 }
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a4404f5ad68e..f502a16aac21 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -520,7 +520,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
         }
 
         if (tty)
-                ti_set_termios(tty, port, tty->termios);
+                ti_set_termios(tty, port, &tty->termios);
 
         dbg("%s - sending TI_OPEN_PORT", __func__);
         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -562,7 +562,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
         usb_clear_halt(dev, port->read_urb->pipe);
 
         if (tty)
-                ti_set_termios(tty, port, tty->termios);
+                ti_set_termios(tty, port, &tty->termios);
 
         dbg("%s - sending TI_OPEN_PORT (2)", __func__);
         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -831,8 +831,8 @@ static void ti_set_termios(struct tty_struct *tty,
         int port_number = port->number - port->serial->minor;
         unsigned int mcr;
 
-        cflag = tty->termios->c_cflag;
-        iflag = tty->termios->c_iflag;
+        cflag = tty->termios.c_cflag;
+        iflag = tty->termios.c_iflag;
 
         dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
         dbg("%s - old clfag %08x, old iflag %08x", __func__,
@@ -871,7 +871,7 @@ static void ti_set_termios(struct tty_struct *tty,
         }
 
         /* CMSPAR isn't supported by this driver */
-        tty->termios->c_cflag &= ~CMSPAR;
+        tty->termios.c_cflag &= ~CMSPAR;
 
         if (cflag & PARENB) {
                 if (cflag & PARODD) {
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 27483f91a4a3..aa4b0d775992 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -207,7 +207,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
         if (retval)
                 goto error_get_interface;
 
-        retval = tty_standard_install(driver, tty);
+        retval = tty_port_install(&port->port, driver, tty);
         if (retval)
                 goto error_init_termios;
 
@@ -305,8 +305,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
  * Do the resource freeing and refcount dropping for the port.
  * Avoid freeing the console.
  *
- * Called asynchronously after the last tty kref is dropped,
- * and the tty layer has already done the tty_shutdown(tty);
+ * Called asynchronously after the last tty kref is dropped.
  */
 static void serial_cleanup(struct tty_struct *tty)
 {
@@ -423,7 +422,7 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
         if (port->serial->type->set_termios)
                 port->serial->type->set_termios(tty, port, old);
         else
-                tty_termios_copy_hw(tty->termios, old);
+                tty_termios_copy_hw(&tty->termios, old);
 }
 
 static int serial_break(struct tty_struct *tty, int break_state)
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 6855d5ed0331..72b678d90831 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -67,7 +67,7 @@ void usb_wwan_set_termios(struct tty_struct *tty,
         struct usb_wwan_intf_private *intfdata = port->serial->private;
 
         /* Doesn't support option setting */
-        tty_termios_copy_hw(tty->termios, old_termios);
+        tty_termios_copy_hw(&tty->termios, old_termios);
 
         if (intfdata->send_setup)
                 intfdata->send_setup(port);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 473635e7f5db..b36077de72b9 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -724,7 +724,7 @@ static void firm_setup_port(struct tty_struct *tty)
 {
         struct usb_serial_port *port = tty->driver_data;
         struct whiteheat_port_settings port_settings;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
 
         port_settings.port = port->number + 1;
 
diff --git a/firmware/Makefile b/firmware/Makefile
index 344713b11669..fdc9ff045ef8 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -40,7 +40,6 @@ fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \
                              bnx2/bnx2-mips-06-6.2.1.fw \
                              bnx2/bnx2-rv2p-06-6.0.15.fw
 fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
-fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
 fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
                                    cxgb3/t3c_psram-1.1.0.bin \
                                    cxgb3/t3fw-7.10.0.bin \
diff --git a/firmware/intelliport2.bin.ihex b/firmware/intelliport2.bin.ihex
deleted file mode 100644
index e9cfe8cb2b21..000000000000
--- a/firmware/intelliport2.bin.ihex
+++ /dev/null
@@ -1,2147 +0,0 @@
-:100000003C4237180201030000000000000000001D
-:10001000576564204465632030312031323A3234F0
-:100020003A33302031393939000000000000000037
-:10003000E96C0F426547694E6E496E47206F462056
-:10004000634F6445CC135A15E8167618041A921BB0
-:10005000201DAE1E3C20CA215823E6247426022807
-:1000600090291E2BAC2C3A2EC82F5631E432723414
-:1000700000368E371C39AA3A383CC63D543FE24020
-:100080007042FE438C451A47A848364AC44B524D2D
-:10009000E04E6E50FC518A531855A6563458C2593A
-:1000A000505BDE5C6C5EFA5F88611663A464326646
-:1000B000C0674E69DC6A6A6CF86D866F1471A27253
-:1000C0003074BE754C776C778C77AC7733DB8ADC19
-:1000D0005333DB250700750A8A1E080183E30CEB06
-:1000E00020903C01750A8A1E080180E3C0EB129043
-:1000F0008A1E0D013C02750680E30CEB049080E340
-:10010000C053508B1EBA138EDBE86A65558BEC53D7
-:100110001E2BC08ED88B5E04C1E304035E06D1E3C0
-:100120002E8B9F44008D472A1E5A1F5B5DC3558B43
-:10013000EC531E2BC08ED88B5E04C1E304035E0615
-:10014000D1E32E8B9F44008D47341E5A1F5B5DC345
-:10015000FB558BEC53515256571E061E0733C08E6B
-:10016000D88B5E04268A47592503008BF0D1E62EF2
-:100170008BB4C400C1E0042602471AD1E08BE82EFC
-:100180008BAE4400892C268A471C88440F268A4758
-:100190001D884410268A471E884411268A471F88D6
-:1001A0004412268A4720884413268A472388441409
-:1001B000268A4724884415268A475A88440E33C025
-:1001C00089440689440888440B88440AB021B464F1
-:1001D000894404894402B05588440D88440CE86A77
-:1001E00000725BE8C900E8C110894408807C0F01F7
-:1001F0007429E82B02E87F02807C0F03741DE8A9B4
-:10020000108BF82B44083DA00F7210897C0833C076
-:1002100087440685C07504C6440AFF8A440A84C020
-:10022000750BB80800E86A4AE8A90173BFE84F01F6
-:100230008166487FFF83667ABFB002E8040E8A4475
-:100240000A98071F5F5E5A595B5DC3814E48800064
-:10025000B040E83D4AE88940732AE84D108BD8B099
-:1002600005E82E4AF6462702751AE83D102BC33DD5
-:10027000581B72EB8166487FFFB002E8C40DC6448C
-:100280000A01F9C3834E7A40F8C3FBB001E8024A81
-:10029000FAE8991EE40A84C075F0B04EE60AFBB095
-:1002A00001E8EE49FAE8851EE40A84C075F0C3FA55
-:1002B000E87A1EE4EC884416E4E4884417E4F888FD
-:1002C0004418E4F0884419E41088441AE41288447D
-:1002D0001BE41488441CE43488441DE43688441E1E
-:1002E000E4D824018AE0E4DA24020AC488441F8A9C
-:1002F0004410E8CD1F8A4411E835218A4412E88968
-:10030000218A4413E84321C686A10000E414241086
-:10031000E614E412243DE6128A44153C01721E776D
-:1003200016B011E634B013E636E4140C10E614E40B
-:10033000120C40E612EB06E4120C02E6128A440F9D
-:100340003C0174063C02740AEB0EE4120C08E6123F
-:10035000EB06E4120C10E612E82FFF8A44143C026C
-:100360007508B05588440C88440DB021B4648944A4
-:1003700004894402E40C0C10E60CE8ED39FBC3E8F8
-:100380005F3F7308FBB00AE80849EBF3FAE89D1DEC
-:100390008A64168A441789869400E6E48AC4E6ECE7
-:1003A0008A64188A441989869600E6F08AC4E6F8B9
-:1003B0008A441AE6108A441BE6128A441CE6148A10
-:1003C000441DE6348A441EE6368A441FE6D8E6DA3F
-:1003D000E9B7FE90FA8A440EE6FEE402A80175052C
-:1003E00033C0FBF8C333C0E400FBF9C38A64148054
-:1003F000FC02742BFEC0FEC780FF4E721C74098085
-:10040000FF507308B00AEB17B00DEB1302DC32FF9C
-:1004100080FB7F7C02B3218AC33C7F7C02B021C376
-:10042000FA807C0B047602FBC38B46243D080072E5
-:10043000F68E46028B7E228A440C8B5C02AAE8ABC5
-:10044000FFAAE8A7FFAAE8A3FFAAE89FFF88440C39
-:10045000895C0280440B04897E22836E24048346D7
-:100460001A04807E26027406806626FDFBC360B0F7
-:10047000FDE8023F61FBC3FA807C0F037509C644A7
-:100480000B00E8E538FBC3C47E148B4E3A85C97572
-:1004900035268B0D4747E3EA3B7E047622B80200FF
-:1004A00039462E7707C7462E0000EB138B5E2C894A
-:1004B0005E0426C70700004343895E2C29462E852B
-:1004C000C978CE894E3A8A440D8B5C04268A25472A
-:1004D0003AC47516FE4C0BFF4406E80FFFE2ED88A8
-:1004E000440D895C04894E3AEBA7C6440AFEE879BC
-:1004F00038FBC390E8B30D8AE88A0ECB13B3078AA2
-:10050000C1EEEB00EC3AC1750902CDFECB75F0EB04
-:100510000C90880ECB138AE8BBFFFFF9C3880ECB83
-:1005200013F8C390BB3F3F8A8E9E00BAFE00EC8A50
-:10053000E832C122C37502F8C3F9C390E8E5FF733E
-:1005400001C3BAD000BB03038A8E9F00EC8AE83255
-:10055000C122C37502F8C3F9C39033C08ED88EC0D0
-:10056000803EC813007507B00AE82647EBF2FB335C
-:10057000DB8A1EC913434383FB7E760733DBB0025D
-:10058000E80F472E8BAF4400837E080074E7881E77
-:10059000C913B002E8FB46FAF7463840007414E885
-:1005A000961BE87FFF721C33D28A969F0083C20E8F
-:1005B000EB0C90E8771BE883FF7208BA4800E83339
-:1005C000FF73AB23CB898E9A0089969C00FE86B57B
-:1005D00000C606C81300B00AE8670AFBEB891018CA
-:1005E000082833C0A005018AC824407524C7067CAA
-:1005F000128E45C70642120100C606541202B00808
-:10060000F6C1017402B004A34612A24C12A29412C5
-:10061000C3C7067C12B645A00F0184C0750E6A00E0
-:100620001FC60693121E9C0EE8B10C90C70644121A
-:100630000100A342128BD8C1E304881E9412BEE2CB
-:10064000052BF08BC833DB8BFB2EAC888548128AD8
-:10065000D80C05E6FE8AE0EB00E4FE32C4A83F7445
-:1006600003E99E00E400888550128AE02430BA1025
-:10067000FF3C30741280FC04740ABA0403F60608C6
-:1006800001FE7403BA080F88954C1202FA32C0F6C4
-:10069000C4087402B001888558128AC43C35745B62
-:1006A0003C3674573C3474533C04744F3C14744BC4
-:1006B0003C157447A8407425C685541204D1E7B48C
-:1006C000038AC389855C128AC38AE380CC01898549
-:1006D0006412D1EF47E203EB1A90E96CFFC6855430
-:1006E0001202D1E78AE68AC30C0489855C12D1EF35
-:1006F00047E2E733C08AC7A34612C3C68554120631
-:10070000EBBBC68554120033C08885501288854CD7
-:100710001288855812EBA6C7462602128B461E8900
-:1007200046008946228B4620894624C7461A000087
-:10073000C3C7463C8000C7463801001E568B763042
-:100740008976048976148E5E0633C089044646890C
-:10075000762C89463A8B4632484889462E5E1FC31E
-:1007600033C089464889464AC74646AE0189464E47
-:100770008B46448946508B4642894640894608C389
-:1007800033C0894676894678C7467A1000561E8B54
-:10079000767089761089760C8E5E12C70400008B05
-:1007A00046728946741F5EC3895618895602895657
-:1007B0000689560A89560E8956128956168BD84BC9
-:1007C0004BC1E302BF0200897E1E03FB897E30031A
-:1007D000FB897E4203FB897E7083EB08895E20895A
-:1007E0005E32895E44895E7250E82BFFE871FFE853
-:1007F0003FFFE88BFF58C3B83075C1E8040E5B03B8
-:10080000C3A3BA13833E4212007407803E941200C1
-:10081000750E6A001FC60693121E9C0EE8BD0A9054
-:10082000B8307AC1E80440A3C0132B061201F7D8F0
-:1008300033D28BCA8A0E9412F7F13D8000770E6A8C
-:10084000001FC6069312259C0EE8900A90483DFFB3
-:10085000077203B8FF07A3C21333C98A0E94123379
-:10086000F6B800092E8BAC440089464C404646E25F
-:10087000F38A0E941233F68B16C013A1C2132E8B7B
-:10088000AC4400E822FF03D04646E2F2C333C02E58
-:100890008BAD44008946084747E2F4C35133C00A90
-:1008A000C22E8BAD440089869E00814E38002047C1
-:1008B00047FEC480FC04720432E4FEC0E2E35983C4
-:1008C000E9107405F7D9E8C4FFC35133C00AC22E3A
-:1008D0008BAD440089869E00834E3840474780C4D4
-:1008E00010790432E4FEC0E2E65983E9107405F79A
-:1008F000D9E899FFC3E8D2FFC38D089C08CA08F560
-:10090000088B0E421233F6515633DB8BCB8A944858
-:10091000128A8C4C128A9C54128BFEC1E70585DB2F
-:100920007502B1102EFF97F9085E5946E2D9C3014E
-:10093000CC03D000E802D000E801D000E800D000ED
-:10094000E804D0A8DA00DC00DE01D803CC03CC0335
-:10095000CC04D0A8DA20DC00DE03CC03CC03CC002E
-:10096000D803CC03CC03CC03CC03CC03CC03CC0303
-:10097000CC03CC03CC03CC03CC03CC03CC03CC03FF
-:10098000CC04D000DA20DC03DE01D803CC03CC0396
-:10099000CC03CC00D800CC00D0000056521E0E1F55
-:1009A000BE2F0933D2FCAD85C0740D8AD4EEAD855F
-:1009B000C074058AD4EEEBEE1F5A5EC3E48084C097
-:1009C00074167814B027E6FCB011E634E4FC3C273A
-:1009D0007506E4117502F8C3F9C383C206B0BFEE11
-:1009E00083EA02B010EE8886AF00B01183C204EE35
-:1009F00083C202EEB01383C202EE83C202EE2EA1C6
-:100A00004C2D8986940083EA0EEE83C2028AC4EEDE
-:100A100083C204B003EE8886A80083EA0432C0EEE5
-:100A200083C202B089EE8886A6000C06EEB040B400
-:100A30003889461CC74636380083C20432C0EE8867
-:100A400086A700C383C206B0BFEE83EA02EC3A86F3
-:100A5000AF00752483C204EC3C11751C83C206EC04
-:100A60003C13751483EA088A86A800EE83EA02EC38
-:100A700024C03CC07502F8C3F9C333C98BD18BF1D4
-:100A80008A0E9412C1E9022E8BAC4400F74638005E
-:100A900020740E8A869E00E6FE32C0E68042E8FAA6
-:100AA000FE83C608E2E185D27403E80508C333C9B2
-:100AB0008BF18A0E94122E8BAC4400F7463840001E
-:100AC0007406E87316E812FF4646E2EAC333C98BA0
-:100AD000F18A0E9412C1E9022E8BAC4400F746381D
-:100AE00000207416E84616E8D2FE730E6A001FC690
-:100AF0000693121C9C0EE8E3079083C608E2D9C354
-:100B000033C98BF18A0E94122E8BAC4400F7463811
-:100B100040007416E82116E82AFF730E6A001FC60B
-:100B20000693121C9C0EE8B307904646E2DAC30C0B
-:100B300000001000131200001400283C001B3E00AF
-:100B4000002A00002C0000420014D80000DA000047
-:100B50003400113600133800113A001300005650CB
-:100B600052BE2F0B2EAD85C07406922EACEEEBF468
-:100B70005A585EC3532EA16022E6E4E6F08AC4E62A
-:100B8000ECE6F8E8D8FFB04BE610B050E612B0380B
-:100B9000E614E8AE15B046E60AE8A715B01AE60A6C
-:100BA000E8A015B022E60AE89915E8FD068BD8E41E
-:100BB00016A8047518E8F2062BC33D320072F06ADD
-:100BC000001FC6069312239C0EE8100790E8DA0671
-:100BD0002BC33D2400771BB031E6FC565155B910AC
-:100BE000002E8BAC4400814E3880004646E2F25D18
-:100BF000595EE869FFE84B15B046E60AE844155B24
-:100C0000C333F68B0E42122E8BAC4400F7463800ED
-:100C1000207406E81715E85BFF83C620E2E9C38B62
-:100C2000C20504008946282EA14C2D89868E008994
-:100C300086900089869200C686A3000AC686C300F5
-:100C4000035283C2048A86A6000C06EE5A83C202AF
-:100C5000B005EE8886A500C3E803FFE8E514B042BE
-:100C6000E60AF74638800074062EA19C22EB042E7B
-:100C7000A16C22C7461C0C008986940089869600C8
-:100C800089868E008986900089869200E6F0E6E4E7
-:100C90008AC4E6F8E6ECC686C30003E8A514B01AD9
-:100CA000E60AB0108886A500E60CC333C98BF18A2A
-:100CB0000E94122E8BAC4400F7463840007406E8C0
-:100CC0007614E85AFF4646E2EAC333C98BF18A0E2E
-:100CD00094122E8BAC4400F7463800207406E84C82
-:100CE00014E874FF4646E2EAC390833E441200755E
-:100CF00014B001BA0601EE2AC0EEB002EEB004EE66
-:100D0000B80002EB0FBA0601B040EEB801008A0E3F
-:100D10000E01D3E0A38812C3A18812A384122D2050
-:100D200000A38A122D2000A38212C706861220007B
-:100D3000C70680123200C3833E44120074768B0EC5
-:100D4000421233F68AA4541284E4745F8A844812EF
-:100D50000C04E6FEF6C4047425B01BBA0000EEEBEA
-:100D6000002AC0BA0200EEEB00B003EEEB0032C086
-:100D7000BA0200EEEB00BA0000B000EEEB2DB01F9F
-:100D8000BA0000EEEB002AC0BA0200EEEB00B0039E
-:100D9000EEEB00D1E68A845D12D1EEF6D0BA020005
-:100DA000EEEB00BA0000B00AEEEB00E404EB00E466
-:100DB0000446E290C390B81400BA3EFFEFB80600B4
-:100DC000BA32FFEFB80F00BA34FFEFBA36FFEF8345
-:100DD0003E4412007516B81100BA38FFEFB8120081
-:100DE000BA3AFFEFB81B00BA3CFFEFC3B81100BA24
-:100DF00038FFEFB81200BA3AFFEFB81B00BA3CFF59
-:100E0000EFC3B8FC00BA28FFEFFB833E4412007426
-:100E100007B8CC00BA28FFEFC300FFFF202428FF4B
-:100E20002CFFFF303438FFFF3C903C0F770EBB198E
-:100E30000E2ED73CFF74058AD8F8C3902ADBF9C37D
-:100E4000833E4412007427A00601802606013080EC
-:100E50003E0601307518B90200BFC413BA0601EC92
-:100E6000A82075F8BA0401EDABE2F1EB1690B904D5
-:100E700000BFC413BA0601ECA82075F8BA0401EC4F
-:100E8000AAE2F1FA90BEC413AD80E43F80FC027484
-:100E90000E6A001FC60693120A9C0EE83E0490AD2F
-:100EA0003C0F75ED8AC4E881FF72E6881E1A01C600
-:100EB000068E1200B0000A061A01BA0001EEC6063C
-:100EC0008F1240833E4412007506B80C00EB04906C
-:100ED000B84C00BA28FFEFC3833E4412007501C32B
-:100EE000A150120B0652120AC4A80874F2A00F01F6
-:100EF0002AE450FF36BA131FE8505683C4026A0032
-:100F00001F33C0A3BC13A00F01A3BE138B1EBC13C1
-:100F10008A875012F687501208740D24078AE0BEA3
-:100F2000CC00A0BC13E8943DFF06BC13FF0EBE131B
-:100F300075DAC3901E33C08ED8B001E8543D1FC38C
-:100F400033C98BF18A0E94122E8BAC4400C74662D3
-:100F50003844C7467CFC3BC7467EE23BC7868000E0
-:100F6000EC3CE8AB16C686C00011837E080074070F
-:100F70005156E833335E594646E2CDC333C98BF14F
-:100F80008BF98A0E9412C1E902E3132E8BAC440054
-:100F90008A869E0088856C1283C60847E2EDC3FAF4
-:100FA000FCB0C0BA0001EE33C08ED88EC08ED0BF68
-:100FB0001601B9CC772BCFD1E9F3ABBC4012E8D9FD
-:100FC00002E8703CBECC0FE8F23CF49033C08ED8FF
-:100FD0008EC08ED0F6060A0180740BBE3555E8DB54
-:100FE0003CB001E8AC3CE8B300E8F6F5E808F8E806
-:100FF0000FF9E885FAE8B6FAE8EFFCE8C210E80372
-:101000003CE8B2FDE830FDE85402C6068F12C0E8A5
-:10101000BBFAE8EBFAE8E9FBE8AFFCE88DFCE81F77
-:10102000FFE858FFE8DBFDE816FE33C0BE5A05E8CE
-:101030008A3CE8A3FEE8E0FCFBBEA444E87D3CE972
-:10104000CA2D56988BF08B425285C07527C74252E5
-:10105000010053368B9C2C01F6C301750C36896850
-:10106000523689AC2C015B5EC33689AC2C013689C3
-:10107000AC1C015B5EC356988BF033ED368B841C41
-:1010800001A80175158BE833C08742523689841C4C
-:1010900001A80174053689842C015EC3565133F6CC
-:1010A000B80100B9080089841C0189842C014646D6
-:1010B000E2F4595EC390BB01008BE8FF4E6E740AE8
-:1010C0008BDD8B4658A80174F0C38B4648A90800F5
-:1010D0007445F7463840007427E85C1080C2068AE1
-:1010E00086A80024BF8886A800EE60B0FEE886329D
-:1010F00061B002E84CFF8B464824F7894648EB175D
-:10110000E82A10814E2600408A86A5000C028886B7
-:10111000A500E60C8B4648A904007414B002E8212F
-:10112000FF8B464824FB89464860B0DFE8473261C0
-:1011300033C0874658F6C301750B36894758A80156
-:10114000750DE974FFA32201A8017503E96AFF89FF
-:101150001E3201C3BB01008BE8F74638400074150E
-:10116000E8D50F80C20AECA840750A8BDD8B465685
-:10117000A80174E3C38B462680E4FE80CC02894636
-:1011800026B002E8BCFE33C0874656F6C301750A96
-:1011900036894756A801750BEBBDA32001A8017540
-:1011A00002EBB4891E3001C3601E062BC08ED8A08E
-:1011B000901284C07549A12201A8017503E8F6FECA
-:1011C000A12001A8017503E88AFFA1AC13487805A6
-:1011D0007445A3AC13A1AE134878057451A3AE13A4
-:1011E000A1B0134878057463A3B013A17E124078B0
-:1011F00003A37E12B80080BA22FFEF071F61CFA0C1
-:101200009112403C02720B33C0A29112FF167C1265
-:10121000EBA4A29112EB9FA08E1232068F12A28E27
-:10122000120A061A01BA0001EEB82C01EBA4833EA3
-:101230008412107211BA28FFED0C81EFE85337BA0F
-:1012400028FFED247EEFB80400EB92C6068D120154
-:10125000E83F37C6068D1200A1B213EB8B908A1EB1
-:101260000B012AFF6BC319BA62FFEFB80A00BA601C
-:10127000FFEFB801E0BA66FFEFB8FFFFBA52FFEF29
-:10128000B809C0BA56FFEFC706AC132C01C706AEAB
-:10129000130400C606911200C3908A1E0B012AFF98
-:1012A0006BC305D1E8A31801C39052BA50FFED5AA1
-:1012B000C39053518B1E1801B9320590E2FE4B7555
-:1012C000F7595BC3B080BA00010A061A01EEC39059
-:1012D000B040EBF2B0C0EBEEB000EBEAFA60061EF5
-:1012E000162BDB8EDB2EA1BA4C2EA3924CA09312B0
-:1012F000988BE889262D7A803ECA13007403E96B27
-:1013000042E8C0FFE8ABFFE8A8FFB020C606901295
-:1013100000FF167C128BFD83FF0A7211E8B9FFE80B
-:1013200090FFE8ABFFE88AFF83EF0AEBEA0BFF745C
-:101330000FE8A4FFE87BFFE89AFFE875FF4F75F11F
-:10134000E895FFE86CFFEBB98A86A50024FDEE88DE
-:1013500086A500C38A86A6000C02EEC38B7638F7FA
-:10136000C6010074EF8B4E368B462E3BC173028B49
-:10137000C82BC189462E014E34C47E0426010D8B34
-:101380007E2C83EA04F36C8EC1897E2C3B463C7232
-:1013900012F7C62000750B83CE20897638B000E89E
-:1013A000A0FCC3F7C60400741B8BD883CE108976CB
-:1013B000388A86A70024FE8886A70083C208EE83A9
-:1013C000EA088BC33D40007201C3814E380004839C
-:1013D000C2028A86A50024FA8886A500EEC38A8602
-:1013E000A6000C02EEC3F74638010074F18B4E2EB6
-:1013F00032DB8ABEA30083C206C476048B7E2C83B4
-:10140000F908722CECA80174168AE083EA0AEC83CE
-:10141000C20A84E77551AAFEC34983F90873E5320D
-:10142000FF26011C015E34897604894E2E897E2CAC
-:101430003B4E3C7211F64638207401C3834E38206F
-:10144000B000E8FDFBC3F64638047415834E38102F
-:101450008A86A70024FE8886A70083EA02EE83C25C
-:10146000023D4000725DC332FF26031C85DB740918
-:1014700026891C8BF74747494980E41E80CCC0264B
-:101480008904F6C41074278B7638F7C60010740BE5
-:1014900050FE86B200B00AE8A8FB58F7C6000174F7
-:1014A0000DE882268B76388B4E2E8B7E04AB8BF725
-:1014B00033C0AB32DB8ABEA300494983F9087217F7
-:1014C000E941FF814E38000483C2F88A86A50024D2
-:1014D000FA8886A500EEC3E945FF83C208EC88863A
-:1014E000AA00C0E8048AE08AC88686A90032E08B98
-:1014F0005E3E84E3744F8AC18B4E26F6C504740C9D
-:10150000A808740580E1BFEB0380C940F6C50874E4
-:101510000CA802740580E17FEB0380C980884E2609
-:101520008BF08A86A50084C97408A802741524FD6E
-:10153000EB06A802750D0C028886A50083EA0AEE68
-:1015400083C20A8BC684E77501C3C686BA0001B0A0
-:101550000EE8EEFAF74638000274EE837E2E06722D
-:10156000E88AA6AA00C45E048B7E2CB0FFAAB00253
-:10157000AB26830703836E2E03897E2CF646382024
-:101580007401C3834E3820B000E8B6FAC39083EAF2
-:1015900008E9B4FD83C2068B5E26F6C3C075EF8BE7
-:1015A0004E1CEC8886A40083EA0AA82075028ACD26
-:1015B00032ED8B461A3BC87318014E2A2BC189465F
-:1015C0001AC57600F36E8ED98976003D2000723000
-:1015D000C385C074318BC801462AC57600F36E8E70
-:1015E000D980CB02895E26E832F1F6C701751683F1
-:1015F000C202E853FDF6C710750BB002E843FAC308
-:10160000F6C70174F0C380CB02895E26F6C7017469
-:10161000DE83C202E831FDF686A40040740B80E749
-:10162000FE80CF02895E26EBCCB004E814FAC3C07A
-:10163000C2C8CAC4C6CCCED0D2D8DAD4D6DCDE90EA
-:10164000E90E01E4C48AE0E4C48BD083F90872F0A7
-:1016500026833F0074048BDF49498BFB8ADE83E3DA
-:101660000F2E8AA72F16ABF6C4107424F7C60010ED
-:10167000740B50FE86B200B00AE8C6F958F7C600EF
-:1016800001740DE8A0248B76388B4E2E8B7E04AB34
-:10169000897E0433C0AB4949894E2E897E2C8BC18B
-:1016A000EB4E90EB9E90E4D684C07963E6D08AC876
-:1016B00025030003D8D1E32E8BAF4400888EAE0003
-:1016C0008B4E2EC45E048B7E2C8B7638E4862407EA
-:1016D0003C0375CFE41C913BC173028BC82BC189BD
-:1016E000462E014E3426010FBAC400F36C897E2CBD
-:1016F0003B463C721CF7C62000750B83CE208976D2
-:1017000038B000E83CF98A86AE00243FE6D6C3F93B
-:10171000C3F7C60A007435F7C61000752F83CE10C4
-:10172000897638F7C60200740E50E4D824FEE6D855
-:1017300058F7C6080074155051B9E803E40A84C08C
-:10174000E0FA84C07504B024E60A59583D4000739D
-:10175000B58A86A50024EF8886A500E60C81CE1008
-:1017600004897638EBA00008040C0109050D020A73
-:10177000060E030B070F004080C02060A0E0105051
-:1017800090D03070B0F0E4D2E6D08AC825030003D0
-:10179000D8D1E32E8BAF4400888EAE00E4D8C0E8E9
-:1017A000048BD82E8A8766178AE08AC88686A900A5
-:1017B00032E0E4988B5E3E84E374548AC18B4E26FB
-:1017C000F6C504740CA808740580E1BFEB0380C95A
-:1017D00040F6C508740CA802740580E17FEB038015
-:1017E000C980884E268BF08A86A500F6C1FD740854
-:1017F000A806741924F9EB0FA8067511F6C5017532
-:10180000040C04EB020C028886A500E60C8BC6844F
-:10181000E775098A86AE00243FE6D2C3C686BA00C1
-:1018200001B00EE81CF8F74638000274E6837E2EFD
-:101830000672E08A86A9008AE08686AA008AC832F3
-:10184000C480C90B22C1C0E4040AE0C45E048B7EDC
-:101850002CB0FFAAB002AB26830703836E2E038948
-:101860007E2CF646382075AB834E3820B000E8D188
-:10187000F7EBA090E41224DFE61281E3FE9F895E7D
-:1018800026836648F7EB7390F6C72075E7E4120CE1
-:1018900020E61232C0E6C6B083E6C680CF20895E5D
-:1018A000268A86A5000C028886A500E60CEB7490BB
-:1018B000F6C74075D3E4120C20E61232C0E6C6B07B
-:1018C00081E6C680E7DF80CB01895E26B006E8713D
-:1018D000F7908A86A50024F9E60C8886A500EB43DC
-:1018E000E4D4E6D08BF825030003D8D1E32E8BAFE8
-:1018F00044008B5E26F6C76075B6F6C3C075D3BAD2
-:10190000C6008B4E1C8B461A3BC8731E014E2A2BF9
-:10191000C189461AC57600F36E8ED98976003D20BE
-:1019200000723D8BC7243FE6D4C385C074398BC891
-:1019300001462AC57600F36E8ED983CB02895E26D6
-:10194000E8D9EDF6C70175398A86A50024F9E60CB9
-:101950008886A500F6C71075CAB002E8E4F6EBC3A6
-:10196000F6C70174EFEBBCF6C70174DC8A86A500EC
-:10197000A802741181E3FFFE81CB0002895E26EB91
-:10198000C78A86A50024FB0C02E60C8886A500EB1E
-:101990009290FDF7DF7FFEFBEFBF0004000405041B
-:1019A00005040104000405040504060406040504F6
-:1019B00005040604060405040504020400040504E5
-:1019C00005040104000405040504060406040504D6
-:1019D00005040604060405040504070407040504B9
-:1019E00005040704070405040504060406040504A9
-:1019F0000504060406040504050407040704050499
-:101A00000504070407040504050406040604050488
-:101A10000504060406040504050403040004050483
-:101A20000504010400040504050406040604050475
-:101A30000504060406040504050402040004050464
-:101A40000504010400040504050406040604050455
-:101A50000504060406040504050407040704050438
-:101A60000504070407040504050406040604050428
-:101A70000504060406040504050407040704050418
-:101A80000504070407040504050406040604050408
-:101A90000504060406040504050433DB8AD88A8796
-:101AA0006C12E6FEC1E302E4CEA8047509A8027434
-:101AB00003E92CFEF9C35053E8CBFC5B58A8027431
-:101AC00003E91CFEF8C333DB8AD88A876C12E6FE72
-:101AD000C1E302E9D0FB9A1AC61A00000200040012
-:101AE00002000600020004000200080002000400D8
-:101AF000020006000200040002000A0002000400C6
-:101B000002000600020004000200080002000400B7
-:101B1000020006000200040002000C0002000400A3
-:101B20000200060002000400020008000200040097
-:101B3000020006000200040002000A000200040085
-:101B40000200060002000400020008000200040077
-:101B5000020006000200040002000E000200040061
-:101B60000200060002000400020008000200040057
-:101B7000020006000200040002000A000200040045
-:101B80000200060002000400020008000200040037
-:101B9000020006000200040002000C000200040023
-:101BA0000200060002000400020008000200040017
-:101BB000020006000200040002000A000200040005
-:101BC00002000600020004000200080002000400F7
-:101BD00002000600020004000200C390DA1494150B
-:101BE0005C13E613DA1BDA1BE613DA1B8B94641220
-:101BF000C1E604A80174355033C08AC2E6FEE4A0F1
-:101C000085C074278BD82E8A9FDA1A52562E8BA83D
-:101C100044008B5628ECA801750D8886AD00240E73
-:101C20008AD82EFF97DC1B5E5AEBCD58A80274367B
-:101C300083C61033C08AC6E6FEE4A085C074278B35
-:101C4000D82E8A9FDA1A52562E8BA844008B56281B
-:101C5000ECA801750D8886AD00240E8AD82EFF975A
-:101C6000DC1B5E5AEBCDC39032E48BD88BD02E8A2E
-:101C70009F9A192E2297921956528AC3240303C69B
-:101C800080E304D0EB2EFF97D61A585EA955007555
-:101C9000D9C3601E062BC08ED8A15C12E6FEE400FC
-:101CA00022C4740833F6E8BFFFEBEE90E40407E4C7
-:101CB000041FB80080BA22FFEF61CF90601E062B90
-:101CC000C08ED8A15E12E6FEE40022C47408BE04F1
-:101CD00000E894FFEBEDE40407E4041FB80080BAC9
-:101CE00022FFEF61CF90601E062BC08ED8A15C1240
-:101CF000E6FEE40022C4741833F6E86BFFA160121C
-:101D0000E6FEE40022C474E5BE0800E85AFFEBDDFD
-:101D1000A16012E6FEE40022C475EDE40407E404C9
-:101D2000A15C12E6FEE4041FE404B80080BA22FFBE
-:101D3000EF61CF90601E062BC08ED8A15E12E6FE2A
-:101D4000E40022C47419BE0400E81CFFA16212E67C
-:101D5000FEE40022C474E4BE0C00E80BFFEBDCA13F
-:101D60006212E6FEE40022C475EDE40407E404A177
-:101D70005E12E6FEE4041FE404B80080BA22FFEF1E
-:101D800061CF601E062BC08ED8A15C12E6FEE480F7
-:101D900084C4740833F6E853FEEBEE90B80080BAC2
-:101DA00022FFEF071F61CF90601E062BC08ED8A1C7
-:101DB0005E12E6FEE48084C47408BE0200E82CFED5
-:101DC000EBEDB80080BA22FFEF071F61CF90601ED5
-:101DD000062BC08ED8A16012E6FEE48084C474088D
-:101DE000BE0400E806FEEBEDB80080BA22FFEF0764
-:101DF0001F61CF90601E062BC08ED8A16212E6FE36
-:101E0000E48084C47408BE0600E8E0FDEBEDB80091
-:101E100080BA22FFEF071F61CF90601E062BC08E95
-:101E2000D8A15C12E6FEE40022C4741833F6E83749
-:101E3000FEA16012E6FEE48084C474E5BE0400E8FE
-:101E4000AAFDEBDDA16012E6FEE48084C475EDA17D
-:101E50005C12E6FEE40407E4041FB80080BA22FF27
-:101E6000EF61CF90601E062BC08ED8A15E12E6FEF9
-:101E7000E40022C47419BE0400E8ECFDA16212E67D
-:101E8000FEE48084C474E4BE0600E85FFDEBDCA1E0
-:101E90006212E6FEE48084C475EDA15E12E6FEE403
-:101EA0000407E4041FB80080BA22FFEF61CF601E70
-:101EB000062BC08ED8A15C12E6FEE48084C47418A0
-:101EC00033F6E827FDA16012E6FEE40022C474E5C3
-:101ED000BE0800E892FDEBDDA16012E6FEE4002200
-:101EE000C475EDE40407E4041FB80080BA22FFEFD4
-:101EF00061CF601E062BC08ED8A15E12E6FEE48084
-:101F000084C47419BE0200E8E2FCA16212E6FEE499
-:101F10000022C474E4BE0C00E84DFDEBDCA16212AB
-:101F2000E6FEE40022C475EDE40407E4041FB800F3
-:101F300080BA22FFEF61CF90601E062BC08ED8A121
-:101F40005C12E6FEE48084C4741833F6E89DFCA1BC
-:101F50006012E6FEE48084C474E5BE0400E88CFCF4
-:101F6000EBDDA16012E6FEE48084C475ED071FB8C6
-:101F70000080BA22FFEF61CF601E062BC08ED8A171
-:101F80005E12E6FEE48084C47419BE0200E85CFCC4
-:101F9000A16212E6FEE48084C474E4BE0600E84B4D
-:101FA000FCEBDCA16212E6FEE48084C475ED071F41
-:101FB000B80080BA22FFEF61CF90601E062BC08E62
-:101FC000D8902AC0E6FEE4CEA801741433DBE8D52D
-:101FD000F6EBEF90B80080BA22FFEF071F61CF90B9
-:101FE000F60605010175EDB001E6FEE4CEA8017428
-:101FF000E3BB0400E8AFF6EBC990601E062BC08E71
-:10200000D890FB90FA2AC0E6FEE4CEA802741333FF
-:10201000DBE8CCF8EBECB80080BA22FFEF071F61D9
-:10202000CF90A80474F033DBE85BF7EBD590601E2B
-:10203000062BC08ED890FB90FAB001E6FEE4CEA845
-:10204000027415BB0400E897F8EBEB90B80080BA77
-:1020500022FFEF071F61CF90A80474F0BB0400E8D3
-:1020600024F7EBD26A001FC6069312099C0EE86B98
-:10207000F2906A001FC6069312299C0EE85DF2904A
-:10208000722072207220CE1D921CE61C1A1E722035
-:10209000821DAE1E381F7220821D72207220381FD2
-:1020A000722072207220F41DBC1C341D641E72202C
-:1020B000A81DF21E781F7220A81D72207220781FA2
-:1020C000FCB940008CCBB864202BFFAB93AB93E200
-:1020D000FAC7064C00A811833E4412007520C706BB
-:1020E0003C00084BC7063000BA1FC7063400FA1F71
-:1020F000F6060501017506C70638002E20C3C7067F
-:102100003C00564B33DB8A1E5412C1E302021E56BA
-:10211000122E8B878020A330008A1E5512C1E30245
-:10212000021E57122E8B87A020A33400C38B869EDD
-:1021300000E6FE86C4E6D0C38B869E00E6FE33D260
-:102140008AD4C351B91027E40A909084C07405E280
-:10215000F659F9C359F8C384C0781E518AE88AC871
-:10216000B80100D3E0098698003AAEA00059751076
-:10217000E8A9E5834E2602F9C39889869800EBF01A
-:10218000F8C384C07812518AE08AC8B80100D3E04D
-:1021900059F7D021869800C3C78698000000C383F2
-:1021A000C2048A86A6000C04EE83EA04C3E893FF07
-:1021B0007204B082E60AC38B4626A8FD74118A8693
-:1021C000A500A806740824F98886A500E60CC3F6C5
-:1021D000C401740A8A86A50024FB0C02EB0CA80239
-:1021E000750F8A86A50024FD0C043A86A50075D8D3
-:1021F000C38A86A500EBCFE4D833DB8AD8C0EB04D2
-:102200002E8A9F6617889EA9008B5E2680E33FF684
-:10221000C7047407A810750380CB40F6C70874077D
-:10222000A880750380CB40885E268A86A500F6C309
-:10223000FD740DA806740824F98886A500E60CC371
-:10224000F6C70174040C02EBF0F6C30275E90C0446
-:10225000EBE7C404C4048504590448044104C303DF
-:10226000820341038202570241028201410182003E
-:1022700041004E02AD0157012D002B002700210027
-:102280001600F404F404A3046F045B045104F40383
-:10229000A3035103A3026D025102A3015101A30044
-:1022A00051006202D9016D01380036003100290069
-:1022B0001B005157BF0200EB0F905156BF0100EBBE
-:1022C00007905156BF0300903C197602B017988BC7
-:1022D000F08A82C4002AE48BF083FE187346D1E6AC
-:1022E0002E8B8C5222F74638800074052E8B8C8200
-:1022F00022F7C7020074123B8E9400740C898E94EE
-:10230000008AC5E6EC8AC1E6E4F7C7010074123B17
-:102310008E9600740C898E96008AC5E6F88AC1E60E
-:10232000F05E59C377068B8E8E00EBC58B8E9000C6
-:10233000EBBFD503F6003E0010000400CA043301D1
-:102340004D00140005000103050709000102030404
-:1023500080841E00A02526000000608BF033FF2E35
-:10236000A150232E8B165223BB3223F74638800010
-:10237000740C2EA154232E8B165623BB3C23B90577
-:10238000002E3B31730A4747E2F7B8FFFFEB1D9081
-:10239000D1EF2E8A8D46232AEDD1EAD1D8E2FAF781
-:1023A000F6050200C1E8022E8AA54B232EA358236E
-:1023B000612EA15823C3080020008000000260099C
-:1023C0000800200080000002000800000100020058
-:1023D0000300040052565785C074053D0109760379
-:1023E000B80109BF5B01F7463880007403BFB20132
-:1023F00033F62E3B84B62376044646EBF5F7E72EFC
-:102400008BBCC02303C783D200D1E7F7F72E8AA481
-:10241000CA235F5E5AC3E43E80BEC30003750CF757
-:10242000467A200074050C80E63EC3247FE63EC356
-:1024300024038886C3008AE0E41024FC0AC4E61062
-:10244000808EA10042E8CEFFC390568BF083E60752
-:10245000D1E62EFFA458249068246C2470247424A0
-:102460007824872487248724B400EB0EB4C0EB0AB9
-:10247000B440EB06B420EB02B4A0E410241F0AC45D
-:10248000E610808EA100425EC3903C0277128AE083
-:10249000E41024F3C0E4020AC4E610808EA10042D6
-:1024A000C3908B5E3884C0741F3C02742083CB08B9
-:1024B0008B462E3B463C770CE888FC7207B024E63E
-:1024C0000A83CB10895E38C383E3F7EBF7F7C310B9
-:1024D0000074F5E86DFC72EC8A86C000E638B02323
-:1024E000E60AEBE08B5E388B462E3B463CE4D87721
-:1024F0000B24FE80CB12E6D8895E38C30C0180CB5A
-:1025000002EBF35033DBC1E804250F0F8AD82E8A83
-:102510008766178ADC2E8AA7661709463E58C3507D
-:1025200033DBC1E804250F0F8AD82E8A8766178A05
-:10253000DC2E8AA76617F7D021463E58C38B463E4D
-:1025400033DB8AD80ADC2E8A877617E62C8AE0E409
-:102550002A240F0AC4E62A8A86A50084E4750DA8F9
-:10256000807411247F8886A500E60CC3A8807504BA
-:102570000C80EBF1C31E6033C933D233F68ED98D94
-:10258000BEFD00578B0584C074168BD1428BFE4F65
-:10259000780938A3E40074084F79F788A2E400466C
-:1025A0005F83C7094183F91072D989B6860089967D
-:1025B0008400611FC353C7466600008B4664A94070
-:1025C00000740DB300A980007402B37F889EC1001F
-:1025D00032DBA90200740380CB40A9004074038061
-:1025E000CB02A90080740380CB01A9301E74038044
-:1025F000CBBCA90020740380CB08A904017403801C
-:10260000CB10A90800740380CB20889EC2005BC356
-:102610000651575016078DBEC400B91F0033C0AA1B
-:1026200040E2FC8B86920089868E00898690005855
-:102630005F5907C3E4D8C0E80453250F008BD82E98
-:102640008A8766178886A9005AC30886AC00C686A2
-:10265000BA0001B00EE8EAE9C3AD36A3B413AD3653
-:10266000A3B613AD36A3B81383E90636F706B6133F
-:102670000F00C38A4626F74648800074020C108873
-:1026800086BD0032C0837E1A00750E8B5E4043808B
-:10269000E3FE3B5E0875020C01837E3A00750D1E59
-:1026A000C55E148B1F1F85DB75020C02F7463810C0
-:1026B0000074020C048B5E7AF7C3020074020C08EB
-:1026C000F7C3040074020C10F7C3080074020C2056
-:1026D000F7C3400074020C408886BF00C3906A00B4
-:1026E0001FC60693120D9C0EE8F1EB90B002E6DADD
-:1026F000F8C333C0E6DAF8C3B001E6D8F8C333C094
-:10270000E6D8F8C3B0FFE84EFAE8A1FAF8C3AC493E
-:10271000E8AFFBF8C390AC49E815FDF8C390AC49AD
-:10272000E867FDF8C390AC49E81FFDF8C390AC49D9
-:10273000E634F8C3AC49E636F8C3AC493C02771F2F
-:1027400084C0751DE41424EFE614E412243FE6125D
-:10275000E416A8047409E8EAF97204B018E60AF865
-:10276000C38AE0E4140C10E614E4120CC0F6C401B1
-:102770007402247FE612F8C3AC49E825FDF8C39043
-:10278000B80040E87DFDE8B4FDE8A8FEB001E8B976
-:10279000FEF8C390B80040E885FDE8A0FDF8C390BE
-:1027A000B80010E85DFDE894FDE888FEB008E899FF
-:1027B000FEF8C390B80010E865FDE880FDF8C3900E
-:1027C000B80080E83DFDE874FDE868FEB002E879F5
-:1027D000FEF8C390B80080E845FDE860FDF8C390BE
-:1027E000B80020E81DFDE854FDE848FEB004E859B3
-:1027F000FEF8C390B80020E825FDE840FDF8C3903E
-:10280000AC49E84814E43C24E70AC4E63CF8C39029
-:10281000B8FC3B89467CE43C0C18E63CF8C3E41267
-:102820000C02E612F8C3E41224FDEBF6E8B5FCF85E
-:10283000C390836638FDF8C3AC49A8017406834E83
-:102840007A20EB0483667ADFE8CBFBF8C3908A86B4
-:10285000A5000C0224FB8886A500E60C814E26010B
-:1028600020AC4932E489466E834E48084946F9C394
-:102870008A86A5000C0224FB8886A500E60C814E02
-:10288000260120ACB40AF6E4EBD8E8FA13E43C24C1
-:10289000F80AC4E63CF8C390AD4949894664A901E9
-:1028A00000741B8BD883E3FA751AA90400740FE433
-:1028B0003E0C02E63EB83844894662F8C390E43ED6
-:1028C00024FCEBEFE43E24FCE63EE8E8FCB8AA403A
-:1028D000EBE6E86EF87205B018E60AF8C390AC496A
-:1028E000E8CFF9F8C390AC49E8CFF9F8C390E868AD
-:1028F000FD750632C0E6DAF8C3B002E6DA36A0B4F7
-:102900001324103410E8160136A1B413A901007481
-:1029100005E8FCFEEB0EA90200740432C0EB02B025
-:1029200001E8DEFE36A1B413E8B513E43C24F80A4E
-:10293000C4E63C36A1B413C1E805250100E8FAFE5F
-:1029400036A0B5132410E859FB32C0368A26B513D9
-:10295000F6C4047409FEC0F6C4087402FEC0E8DBC5
-:10296000FD36A1B613250F00E857F936A1B613C1FD
-:10297000E804250300E8B8FA36A1B613C1E8052536
-:102980000200E805FB36A1B613F6C401750432C097
-:10299000EB0980E402D0ECB0022AC4E8ACFA36F6C7
-:1029A00006B713407405E883FEEB03E884FE36F6B1
-:1029B00006B713207405E865FEEB03E868FEF8C36C
-:1029C000E4120C01E612F8C3E41224FEEBF6E41460
-:1029D00024F00C05E614E42A24F00C06E62AF8C3D9
-:1029E000E42A24F0E62AE41424F00C07E614F8C3E1
-:1029F000AD4949E864F989868E00F8C3AD4949E8D4
-:102A000058F989869000F8C3834E2604E8A8F7F8A1
-:102A1000C390836626FBE89EF7F8C390AC4984C058
-:102A2000750DE41024EFE610808EA10042F8C3E497
-:102A3000100C10EBF190AC493C02760232C0C0E0C1
-:102A400004A82074020C0824188AE0E41224E70A7F
-:102A5000C4E612808EA10044F8C3AC498886C00049
-:102A6000F8C3AC49E63AF8C3AC4984C07408E41230
-:102A70000C04E612F8C3E41224FBEBF6AC49E8D6EA
-:102A8000F67303E827F7F8C3E412A802740424FDE0
-:102A9000E612B8F000E887FA816626FFF3E857F7F8
-:102AA000E89AFAF8C390B88000E857FA804E2708F1
-:102AB000E844F7E887FAF8C3B88000E861FA81666D
-:102AC00026FFF7E831F7E874FAF8C390B81000E889
-:102AD00031FA804E2704E81EF7E861FAF8C3B8100F
-:102AE00000E83BFA816626FFFBE80BF7E84EFAF8B0
-:102AF000C39033C0AC493C017304B001EB063C0CFD
-:102B00007602B00C89461CF8C390814E2600208ABC
-:102B100086A5000C0224FB8886A500E60C834E26C1
-:102B200001F8C390814E2600408A86A5000C0288D9
-:102B300086A500E60CF8C390AC4950E805F658723B
-:102B400008E638B023E60AF8C3F9C390AC50ADE804
-:102B500082F85AF6C201741239869600740C89867E
-:102B60009600E6F086E0E6F886E0F6C202741039D8
-:102B7000869400740A89869400E6E486E0E6EC8395
-:102B8000E903C390E4168886BC00E8E6FA33DBE488
-:102B90000CA806740380CB01A810740380CB02A894
-:102BA00080740380CB04E4128AE024180AD8E4DAA3
-:102BB000F6C4027407A840750380CB20A8027509EB
-:102BC000E42AA80F740380CB40F74638020074094A
-:102BD000E4D8A801750380CB80889EBE00FE86B431
-:102BE00000B00AE85CE4F8C3AC493C027441771FCA
-:102BF00050E84FF558720C84C0740AB012E60A808F
-:102C00004E3801F8C3B011E60A806638FEF8C38B6F
-:102C1000463825FFF7894638A9000475E68A86A557
-:102C200000A81075DE0C108886A500E60CF8C3819C
-:102C30004E3800088A86A500A81074C724EFEBE779
-:102C4000AD49493C0172113C0C770D508AE0E41407
-:102C500025F00F0AC4E614588AC484C07402E64200
-:102C6000F8C3E8CFF9FE86B900B00EE8D4E3F8C3A4
-:102C70003A86AF00741F8886AF008AE080C206B033
-:102C8000BFEE80EA028AC4EE8A86A80080C202EE05
-:102C900080EA068AC4C38B463E85C08A86A5007436
-:102CA00012A808750D0C088886A50080C202EE8067
-:102CB000EA02C3A80874FB24F7EBEC8B462684C019
-:102CC00074168A86A500A802740D24FD8886A500C6
-:102CD00083C202EE83EA02C38A86A500A80275F7C2
-:102CE0000C02EBE85283C20CECC0E8048886A90011
-:102CF0008B5E2680E33FF6C7047407A8087503803F
-:102D0000CB40F6C7087407A802750380CB80885EA5
-:102D1000268A86A50084DB7410A802740A24FD8824
-:102D200086A50083EA0AEE5AC3A80275FA0C02EBE4
-:102D3000EE90FFFF00480030BA20C41A00180012BD
-:102D4000000C0006000300028001C000600030009B
-:102D50001800CD0100018000100010000E000C00D2
-:102D6000080000000000060004000300020001004B
-:102D70005251563C1E7747988BF08A82C40032E449
-:102D800083FE18743D83FE19743E83FE1E772FD197
-:102D9000E62E8B8C322D3B8E94007422898E94000B
-:102DA00083C2068A86A8008AE00C80EE83EA068A3F
-:102DB000C1EE83C2028AC5EE83C2048AC4EE5E59A4
-:102DC0005AC38B8E8E00EBCE8B8E9000EBC8525187
-:102DD0003D05007703B805008BC8BA0200B800D0E3
-:102DE000F7F1050100D1E8595AC38B467AA820743F
-:102DF0000B80BEC3000375040C01EB0224FE894660
-:102E00007AC324038886C3008AA6A8008ADC80E4EB
-:102E1000FC0AC43AC3740B8886A80083C206EE83FA
-:102E2000EA06E8C5FFC30008183828903C04772359
-:102E300032E48BD82E8A87262E8AA6A8008ADC80C8
-:102E4000E4C70AC43AC3740B8886A80083C206EE9E
-:102E500083EA06C384C07402B0048AA6A8008ADC90
-:102E600080E4FB0AC43AC3740B8886A80083C206B8
-:102E7000EE83EA06C3908B5E3884C074343C0274DF
-:102E80003B8A86AF000C04E8E6FD8B462E3B463CB1
-:102E9000771BF7C30004751581CB000483C2028A37
-:102EA00086A50024FA8886A500EE83EA02895E38AA
-:102EB000C38A86AF0024FBE8B6FDEBF1F7C3100030
-:102EC00074EFEBED83C20CEC83EA0CC0E804888657
-:102ED000A900C3908A86A7000C018886A7008BDA18
-:102EE00080C208EE8BD3F8C38A86A70024FEEBEAE3
-:102EF0008A86A7000C02EBE28A86A70024FDEBDAA3
-:102F0000B0FFE852F2E897F2F8C3AC49E861FEF886
-:102F1000C390AC49E8EBFEF8C390AC49E835FFF844
-:102F2000C390AC49E805FFF8C3905283C206B0BF16
-:102F3000EE5283C202AC49EE5A8A86A800EE5AF8D5
-:102F4000C3905283C206B0BFEE5283C206EBE69036
-:102F5000AC493C02770D84C0750B8A86AF0024FD16
-:102F6000E80DFDF8C3508A86AF000C02E801FD5B56
-:102F700083C2088A86A700F6C301740C24DF888602
-:102F8000A700EE83EA08F8C30C20EBF2AC49E8E5B1
-:102F9000FEF8C390B80040E869F5E8F9FCE824FFC2
-:102FA000B001E8A5F6F8C390B80040E871F5E8E58F
-:102FB000FCF8C390B80010E849F5E8D9FCE804FF34
-:102FC000B008E885F6F8C390B80010E851F5E8C5F8
-:102FD000FCF8C390B80080E829F5E8B9FCE8E4FE05
-:102FE000B002E865F6F8C390B80080E831F5E8A5CE
-:102FF000FCF8C390B80020E809F5E899FCE8C4FEA5
-:10300000B004E845F6F8C390B80020E811F5E8856B
-:10301000FCF8C390AC49E8340CF8C390B8FC3B8989
-:10302000467CF8C38A86AF000C80E843FCF8C39066
-:103030008A86AF00247FEBF28A86AF000C40E82F2F
-:10304000FCF8C3908A86AF0024BFEBF2AC49A8011C
-:103050007407834E7A20EB059083667ADFE88AFD59
-:10306000F8C383C2068A86A8000C408886A800EEB2
-:1030700083EA06AC4932E489466E834E2601834ECC
-:103080004808B006E8BBDF4946F9C39083C2068A08
-:1030900086A8000C408886A800EE83EA06ACB40A35
-:1030A000F6E4EBD0E8E00BF8C390AD4949894664FB
-:1030B000A9010074198BD883E3FA750AA904007476
-:1030C0000DB8E23FEB0BE8ECF4B8AA40EB03B838DC
-:1030D00044894662F8C38A86AF00A802740A24FDB8
-:1030E000E88DFB0C02E888FBF8C3AC49E881FCF8EA
-:1030F000C390AC49E879FCF8C390E85CF57505E845
-:10310000E6FDF8C3E8CDFD36A0B41324103410E872
-:10311000260136A1B413A901007405E8FEFEEB0EEA
-:10312000A90200740432C0EB02B001E8E8FE36A147
-:10313000B413E8AB0B36A1B413C1E805250100E8D0
-:103140000CFF36A0B5132410E82BFD32C0368A26BA
-:10315000B513F6C4047409FEC0F6C4087402FEC0B8
-:10316000E8EFFD36A1B613250F00E803FC36A1B643
-:1031700013C1E804250300E888FC36A1B613C1E8B2
-:1031800005250200E8CDFC36A1B613F6C40175048E
-:1031900032C0EB0980E402D0ECB0022AC4E88CFC17
-:1031A00036F606B713407405E88DFEEB03E894FE8F
-:1031B00036F606B713207405E869FEEB03E870FEE7
-:1031C000F8C3F8C38B4638A9040075230D040089A1
-:1031D000463883C2088B462E3B463C7314834E38D8
-:1031E000108A86A70024FE8886A700EE83EA08F8E6
-:1031F000C38A86A7000C01EBEE908B4638A9040029
-:10320000740625FBFF894638F8C3AD4949E8BEFB83
-:1032100089868E00F8C3AD4949E8B2FB89869000E3
-:10322000F8C3834E2604E892FAF8C390836626FB1F
-:10323000E888FAF8C390AC4984C07507808EA30073
-:1032400004F8C380A6A300FBF8C3AC4983C2083CC2
-:1032500002760232C03C017412770B8A86A70024E2
-:10326000EF8886A700EE83EA08F8C38A86A7000CD9
-:1032700010EBEE905283C206B0BFEE5283C204AC94
-:1032800049EE5A8A86A800EE5AF8C3905283C206C5
-:10329000B0BFEE5283C208EBE690AC49F8C3AC492C
-:1032A000E8B4EE7303E8F7EEF8C38A86AF00247F34
-:1032B000E8BDF9B8F000E866F2816626FFF3E8237E
-:1032C000FAE8D2F9F8C3B88000E837F2804E270850
-:1032D000E811FAE8C0F9F8C3B88000E841F2816665
-:1032E00026FFF7E8FEF9E8ADF9F8C390B81000E85A
-:1032F00011F2804E2704E8EBF9E89AF9F8C3B81008
-:1033000000E8FFF1816626FFFBE8D8F9F8C3AC4975
-:10331000F8C383C2068A86A8000C408886A800EEFF
-:1033200083EA06F8C39083C2068A86A80024BFEB0E
-:10333000EA90AC498AE080C20AEC80EA0AA82074CC
-:10334000058AC4EEF8C30651578B4E24E3344989ED
-:103350004E24FF461A8E46028B7E228AC4AA897E9C
-:10336000228B462624FD89462675298A86A500A833
-:1033700002752180C2020C028886A500EE80EA0256
-:10338000EB12C47E003B7E1E760A4F268825897E7E
-:1033900000FF461A5F5907F8C390ACAD83E9038577
-:1033A000C074053D00207205B8FFFFEB03C1E003C8
-:1033B0003B8694007426898694008BD85283C2067B
-:1033C0008A86A8008AE00C80EE83EA068AC3EE8330
-:1033D000C2028AC7EE83C2048AC4EE5AF8C3B08818
-:1033E0008886BC00E88CF233DB8A86A500A80274CC
-:1033F0000380CB01A805740380CB02A80874038066
-:10340000CB04F686A70010740380CB108A86A9002F
-:10341000F6C304750A83C20CEC83EA0CC0E8048A84
-:10342000E08A86AF00A8807408F6C401750380CBDB
-:1034300020F686A70002750AF74638040074038058
-:10344000CB40889EBE00FE86B400B00AE8F3DBF8ED
-:10345000C3FE86B400B00AE8E8DBF8C3AC493C021E
-:103460007437771084C07406804E3801F8C38066C4
-:1034700038FEF8C38B463825FFF7894638A9000483
-:1034800075EA8A86A500A80175E20C0583C2028848
-:1034900086A500EE83EA02F8C3814E3800088A86CA
-:1034A000A500A80174C624FAEBE2AD4949F8C3901F
-:1034B000E811FAFE86B900B00EE886DBF8C3B0FF6B
-:1034C000E8BFECF8C39083667AFBB000E873DBF8E2
-:1034D000C390AC49E853D9721136881E1A0136A040
-:1034E0008E120AC352BA0001EE5AF8C3AC4932E454
-:1034F00036A38612050600368B1E88122BD8368915
-:103500001E8A12F8C390AD8BD8AD83E90403C32B98
-:103510004676894678F7467A0200740A83667AFD11
-:10352000B80000E81CDBF8C3061607AC49250F00FD
-:103530006BC0098DBEFD0003F8AC49250F00AA85BC
-:10354000C074082BC8518BC8F3A459E827F0E8448D
-:103550000307F8C333C0AC4936A3B21336A3B01384
-:10356000F8C383667AEFE82C03F8C390834E7A1091
-:10357000EBF4E89BF0F8C390AD3C19770E3C19775B
-:103580000A8BF881E7FF0088A6C400F8C390834E39
-:103590002620AC4932E4D1E08BD8C1E30203C389D1
-:1035A000466E834E4804B006E897DA4946F9C39060
-:1035B000FE86B300B00AE889DAF8C39033C0AC499C
-:1035C0006BC00A89868A00F8C390AC4932E43D0A90
-:1035D000007705B80A00EB083D5A007203B85A009C
-:1035E00051F7D80564008BC88B4644F7E1B96400F5
-:1035F000F7F189464659F8C3AC49E885EBF8C39022
-:10360000AC4984C07507816638FFFDF8C3814E3828
-:103610000002F74638400075088A86A9008886AA05
-:1036200000F8C3905156E87F0C5E59F8C390FE86AF
-:10363000B600B00AE80BDAF8C390FE86B700B00A0D
-:10364000E8FFD9F8C390FE86B800B00AE8F3D9F8CD
-:10365000C39000905155AC2EA2523633C9AD8BF9B0
-:10366000C1E705A9010074232E8BAD4400837E08B9
-:103670000074182E803E523601740960B004E8BB15
-:103680000C61EB0760B0FBE8EC0C614747D1E875D3
-:10369000D24183F90472C65D5983E905F746384083
-:1036A000007405E887EAF8C3E88DEAF8C39036C6E7
-:1036B00006C81301F8C333C0AC4936A38012AC4925
-:1036C000362B068812F7D836A38212F8C390DE266E
-:1036D000DE26EC26F226F826FE2604270E271627DD
-:1036E0001E2726272E273427BE34C634D2343A2745
-:1036F000782780279427A027B427C027D427E0273E
-:10370000F42700281028EC34DE261E2826282C2832
-:10371000322838284E288A28063528359828BE2889
-:10372000D228DE28E628543562356C35EE28C029CB
-:10373000C829CE29E02972357835F029FC298E3543
-:10374000082A122A1C2AB035362ABC355A2A622A7F
-:10375000682ACA357C2AF835882AA62AB82ACC2AAB
-:10376000DE2AF22A00360A2B242B2436382B4C2B47
-:10377000842B2E363A3646365436E82BAE36402C5D
-:10378000622CB6367028DE26DE26D42EE82EF02EE9
-:10379000F82E002F0A2F122F1A2F222F2A2F422FF6
-:1037A000BE34C634D234502F8C2F942FA82FB42F70
-:1037B000C82FD42FE82FF42F083014301C30EC34ED
-:1037C000DE2624303030383044304C306230A43083
-:1037D00006352835AA30CE30D630EA30F2305435AE
-:1037E00062356C35FA30C231C231C431FA317235CA
-:1037F00078350A3216328E3522322C323632B035D6
-:103800004A32BC3574328C329A32CA359E32F8351F
-:10381000AA32C632D832EC32FE320E3300361233C0
-:103820002633243632339A33DE332E363A36463652
-:1038300054365C34AE36AA34B034B6368C30E32815
-:10384000F7463840007532E8E3E833C0AC493D5BE9
-:103850000077198BD8D1E32EFF97CE36720B85C92E
-:1038600075E88B4648E81A0CC34E41C36A001FC670
-:103870000693120C9C0EE863DAE8BCE833C0AC494E
-:103880003D5B0077E78BD8D1E32EFF97863772D95F
-:1038900085C975E8C3F7467A1000750F83BE8400AA
-:1038A000007408B8483A89868000C381BE8000EC65
-:1038B0003C74F783BE8800007505B8EC3CEBE7F775
-:1038C000467A080075401E608B8E88003B4E7477E8
-:1038D000333B4E78772EC47E108BDF26033D47475F
-:1038E00033C08ED88DB6F4008BC1F7467A010075CF
-:1038F0001DF3A4260107294678014676294674B0AF
-:103900000CE83ED7611FC78688000000EBACE3E3FC
-:103910005090AC247FAAE2FA58EBD8908B8E8800A6
-:10392000E3468B9E8A0085DB743EBA50FFED2B8602
-:1039300082003BC372378DB6F400C47E108BDF2645
-:10394000033D47478BC1161FF7467A01007524F3E4
-:10395000A4260107294678014676294674C7868839
-:10396000000000B00CE8DAD683667AF7C3B000E84E
-:10397000D0D6C3E3DC50AC247FAAE2FA58EBD29055
-:103980001E6033C08ED88DB6FD008B8688008B9666
-:1039900084003A0475108BDE468BC88DBEF400F3AC
-:1039A000A674668BF39083C6094A75E68DB6FD0052
-:1039B0008B9684003A0473108BDE468BC88DBEF460
-:1039C00000F3A674768BF39083C6094A75E68DB62C
-:1039D000F400ACF7467A01007402247F1EC55E1025
-:1039E0008B37884002468937FF4E78FF4676FF4E78
-:1039F000741F8B8E880049898E8800E3438DB6F44E
-:103A0000008BFE46F3A4E97DFFC576108B1C85DB99
-:103A1000740803F383C60383E6FE8B8684002BC2FF
-:103A2000B48089044646C7040000897610834E7A24
-:103A300004C78688000000611FF9C333C0611FC33B
-:103A4000B08084C0611FC3908B4E782B8E88007627
-:103A50002789B68C008B5E743BCB72028BCB3BC844
-:103A600072028BC88BC1E34433D28EC28BD183BE2A
-:103A70008800007406E98E0033C0C38B5E10031FFC
-:103A8000434352F7467A0100752AAC8DBEE4008BA1
-:103A90008E8600F2AE74348807434A75ED588B5E0B
-:103AA0001001072946780146762946748BC62B8675
-:103AB0008C00C390AC8DBEE4008B8E8600F2AE7499
-:103AC0000A247F8807434A75EBEBD28886F400C747
-:103AD0008688000100582BC2740E8B5E10010729E6
-:103AE000467801467629467440E894FE72BE4A75CF
-:103AF0001583BE8A000074B4BA50FFED8986820037
-:103B0000834E7A08EBA68DBEF40003BE8800A4FFA6
-:103B1000868800E86AFE729479064A748FE95BFF32
-:103B20004A74CEEBE19050E811CC8B467439467262
-:103B300074271E565133C9C5760CAD74107809032D
-:103B4000C805010024FE03F03B761076ED294E7681
-:103B5000014E78E837CC595E1F58C390C47E1026BA
-:103B60008B1D83C30326891D4B03FBAB91AAB803AE
-:103B700000294678014676294674C390C47E1026F3
-:103B80008B1D4326891D4303FBAAFF4E78FF467613
-:103B9000FF4E74C3E8E5FFC38081848582838687F6
-:103BA00050538ADC83E30ED1EB2E8A87983B08863C
-:103BB000B000FE86B100B00AE887D45B58C3508AD3
-:103BC000C8B8FF00E895FF58C3908A86BB00E8ABF1
-:103BD000FFC3E8CBFFE8F2FFC390E8C3FFE8B4FF00
-:103BE000C39033C0E895FFC3B8FF0033C9E86CFF4A
-:103BF000C390B8FF01B110E862FFC390C3FC3BE281
-:103C00003BF23BF23BFC3BE23BE83BE83BFC3BE26C
-:103C10003BE83BE83BFC3BE23BE23BE23B00100085
-:103C20000000100000001000000010000000100054
-:103C3000000010000000100000001000000008004C
-:103C40000000080000000800000008000051538B2D
-:103C50004E3881E1FFEEA804740481C900018AE0B6
-:103C600080E4032418D0E40AC433DB8AD82E8B877F
-:103C7000FD3B89467C2E0B8F1D3C894E38D1EB2EA7
-:103C80008AA73D3C5B59C3AC493C01721D74203C82
-:103C900003722374283C08722B74303C20723774F2
-:103CA0003ABBDA3B32E4895E7EC3BBA03BEBF5BB9B
-:103CB000943BB401EBF0BBFC3BB402EBE9BBE23B51
-:103CC000B403EBE2BBBE3BB404EBDBBBCA3BAC4989
-:103CD0008886BB00EBCEBBD23BEBF3BBFC3BEBC41B
-:103CE000A9040075D1A9080075DAEBD18B5E748B3D
-:103CF0004E783BCB72028BCB3BC872028BC88BC118
-:103D0000E32CC47E108BDF26033D4747F7467A013C
-:103D100000751CF7C70100740249A4D1E9F3A5732B
-:103D200001A4260107294678014676294674C35026
-:103D300053BB7F7FF7C70100740549AC22C3AAD1EA
-:103D4000E9E31D9CAD23C3AB497414AD23C3AB4958
-:103D5000740DAD23C3AB497406AD23C3ABE2E59D3F
-:103D60007304AC22C3AB5B58EBB8E8CEC98B5E38AA
-:103D7000F7C310047501C3F7C340007405E8B8E346
-:103D8000EB03E8A8E3816638EFFBF6C310743CF65A
-:103D9000C3027406E4D80C01E6D8F6C30474118398
-:103DA000C2088A86A7000C01EE8886A70083EA086D
-:103DB000F6C308740FE88BE3720A8A86C000E638FF
-:103DC000B023E60AF7C300047501C3F7C300087502
-:103DD000F98A86A500F6C340750DA81075EC0C1085
-:103DE0008886A500E60CC3A80175DF83C2020C0516
-:103DF000EE8886A500C3B000E847D2EB0FB002E81A
-:103E0000900EEB08836638DF834E7A0233C08ED87B
-:103E1000FAA0921240A292123C05721EC60692129D
-:103E200000FBB001E86B0EFAA1260123062A01A8C7
-:103E3000017507E8E207E8610990B000E837D2FBB6
-:103E400085ED74B9FAF7467A460075C08B46783D21
-:103E50000A0072B08B4E7483F950729A836638DF11
-:103E6000C576148B463A85C07558AD85C0750FE888
-:103E7000F8FEF7467A08007493E8A0FAEB8E3B76DA
-:103E8000047621B90200394E2E7705C7462E000070
-:103E9000568B762C897604C7040000464689762C1A
-:103EA000294E2E5E85C07917F6C4107405FF567C26
-:103EB000EB03FF567E897614B00CE885D1EB86893A
-:103EC000463AFF96800029463A897614B00CE8718C
-:103ED000D1E971FF0000000000000000080410029A
-:103EE00001200000000000000000000000000000B1
-:103EF00000000000808080808080808080808080C2
-:103F000080808080808080808080808080808080B1
-:103F100080808080808080808080808080808080A1
-:103F20008080808080808080808080808080808091
-:103F30008080808080C0C0C0C0C0C0C0C0C0C0C0C1
-:103F4000C0C0C0C0C0C0C0C0C0C0C0C0C0C0C080B1
-:103F500080808000808080808080808080808080E1
-:103F60008080808080808080808080808080808051
-:103F70008080808080808080808080808080808041
-:103F80008080808080808080808080808080808031
-:103F90008080808080808080808080808080808021
-:103FA0008080808080808080808080808080808011
-:103FB0008080808080808080808080808080808001
-:103FC00080808080808080808080808080808080F1
-:103FD000808080804E417841D041F44106421842B1
-:103FE000C3908E46028B7E22897E6C806627FD8B75
-:103FF000562483FA0472E983EA028BD93BCA76021B
-:104000008BCAB00A57518BFEF2AE8BC1595F751E39
-:1040100050402BC874062BD12BD9F3A4594B4A4AD4
-:10402000B00DAAA43BCA76028BCAE313EBD42BD9FA
-:10403000F7C601007402A449D1E9F3A57301A4896C
-:104040007E222B7E6C297E24017E1A8BCB807E26DD
-:10405000027405806626FDC360B0FDE8180361C3E5
-:10406000C390E87C0272F990834E26208B466A89C1
-:10407000466E8B46480D040025BFFF894648B006B2
-:10408000E8BFCFC3897E222B7E6C017E1A297E2455
-:10409000807E26027405836626FDC360B0FDE8D5E8
-:1040A0000261C3908ABEC200EB24F7464840007507
-:1040B000B18E46028B7E22897E6C8B562483EA0A5F
-:1040C000789E03D7806627FD33C08ABEC200E3B462
-:1040D0003BFA77B0AC49932E8A87D43E9322DF75A2
-:1040E00017AAE3A03BFA779CAC49932E8A87D43E6B
-:1040F0009322DF7503AAEBD6F6C37F7505FF4666EC
-:10410000EBDFF6C340750C8BD883EB08D1E32EFFB1
-:10411000A7D43FFF46662C20EBC785C0742C894688
-:104120006A834E4840897E222B7E6C017E1A297E4E
-:1041300024807E26027408836626FDE8A301C360FE
-:10414000B0FDE8310261E89801C3E957FF908B5E4A
-:10415000664B7803895E66AA8B5E64F7C3002075A0
-:1041600003E940FFF7C3400074088A86C100AAE94A
-:1041700032FFB83200EBA3908B5E66895E6883C322
-:104180000880E3F8895E668B5E6481E3001881FB3A
-:104190000018742DAA85DB7425F746644000751855
-:1041A00081FB0010740C8B46662B4668C1E004E965
-:1041B00068FFB86400E962FF8A86C100AAAAE9E341
-:1041C000FE518B4E662B4E68B020F3AA59E9D4FEFF
-:1041D0008B5E66895E688B5E64F7C324007410C7CB
-:1041E00046660000F7C304007405B00DAAB00AAA21
-:1041F000EB489090AAF7466400407406B8D007E9EF
-:1042000018FFE99FFE90AAF7466400807406B8D0B4
-:1042100007E906FFE98DFE908B5E66895E6885DBA7
-:10422000750C8B5E64F7C310007406E976FE8B5E36
-:1042300064F7C308007427B00AAAF7C32000751FEB
-:10424000F7C300017503E95BFEF7C340007506B8CC
-:104250006400E9C5FE8A86C100AAAAE946FEAAC78B
-:1042600046660000F7C3000674F1F7C340007419F6
-:104270008A86C10081E3000681FB00047206760293
-:10428000AAAAAAAAAAAAE91BFE81E3000681FB004A
-:1042900004720E7606B89600E97FFEB86400E979EC
-:1042A000FE8B4668E973FE90368B0EDA1283F93284
-:1042B000731D1E0633C08ED88EC08D764CBFDC12A7
-:1042C00003F9A5A5A583C106890EDA12071FC3B09D
-:1042D00008E86ECDC390836648FEE893C4E8C8FF43
-:1042E000C3F6462702750F9CFA837E1A0074098074
-:1042F0004E27019DF9C3F8C35052F7463840007469
-:104300001DE834DE83C20AECA840752783EA088AD8
-:1043100086A5000C028886A500EE5A58EBD1E80C61
-:10432000DE8A86A50024FB0C028886A500E60C5ACE
-:1043300058EBBC804E27025A589DF8C30846269C6D
-:10434000FA8A8EA500F7463840007514F6C1067447
-:1043500023E8D9DD8AC124F98886A500E60C9DC32F
-:10436000F6C102740FE8D0DD83C2028AC124FD8841
-:1043700086A500EE9DC38B5E2622C3884626740167
-:10438000C3806627FD9CFA8A8EA500F74638400058
-:104390007516F6C104750FE893DD8AC124FD0C047F
-:1043A0008886A500E60C9DC3F6C10275F9E888DD94
-:1043B00083C20AECA820750E83EA088AC10C028821
-:1043C00086A500EE9DC383EA0A33C98A4E1C8B463C
-:1043D0001A3BC8731B014E2A2BC189461A1EC5768B
-:1043E00000F36E1F89760083C2028A86A500EBCD9A
-:1043F00085C0741201462A8BC81EC57600F36E1F55
-:10440000897600894E1AF6C701752380CB02895E32
-:1044100026E808C383C2028A86A50024FDEE8886AA
-:10442000A500F6C7107505B002E816CC9DC383C27F
-:10443000028A86A500EB86908BD18B46243BC876FA
-:10444000028BC82BD12BC18BD9E322806627FD8E2E
-:1044500046028B7E22F7C601007402A449D1E9F31B
-:10446000A57301A4897E22894624015E1A8BCA8025
-:104470007E26027405806626FDC360B0FDE8F6FE68
-:1044800061C350E40A84C0750A8686A10084C074A2
-:104490000AE60A580C20894648F9C35824DF8946A1
-:1044A00048F8C390FBB002E8E807FAE82E01FBB039
-:1044B00001E8DE07FAB002E8BCCBFB85ED74E5FA53
-:1044C0008E5E0AFB90FA8B46488B7640A88C75DE90
-:1044D000A820741A50E855DC58E8A6FF7310B00203
-:1044E000E85FCBEBC99025FF008BC8EB3690A801A5
-:1044F00075224683E6FE3B76087479AD8AFCB3F0FC
-:1045000022FB3AFB74E03ABEA000742EE8D2FD73A1
-:1045100077EB9B908AE024FC8846488B4E4AF6C491
-:1045200002741DE8BBFD7286E813F3897640E393BD
-:10453000834E4803894E4AE974FF25FF0F8BC890CC
-:104540008B86980085C0741A518A8EA000C0E90439
-:10455000BA0100D3E25923C2740803F1897640E915
-:1045600061FFFF5662E3F5834E4801894E4A897622
-:1045700040E93AFF814E2600108B46503B46467775
-:1045800003E852FDE927FF9088BEA000EBAC0A06C5
-:1045900090128AE0BA0601B004EEEC84C07512B045
-:1045A00004EE8AC4EE32E4A8807406C706841200C2
-:1045B0000088269012C30A0690128AE0BA0601EC1F
-:1045C000A80175EDBA08018AC4EE32E4A88074E14E
-:1045D000C7068412000088269012C39036F706247E
-:1045E0000101007530368B0EDA1280F936732633EE
-:1045F000C08EC08ED8BFDC1203F9B008E877CA8538
-:10460000ED740E8D764CA5A5A580C10680F9367295
-:10461000E9890EDA12C3C390F7062601010075F688
-:104620008B0E201385C975EE33C08EC08ED8BF2483
-:1046300013B93600B00AE83DCA85ED7506E91201E6
-:10464000E90A0133DB8A464C8AA6B300FECC780E19
-:1046500088A6B3000ADCB40AAB83E90276E28AA634
-:10466000B200FECC780E88A6B2000ADCB408AB8398
-:10467000E90276CC8AA6B100FECC78188ABEB000DA
-:10468000750488A6B00088A6B1000ADC8AE7AB836F
-:10469000E90276AC8AA6B400FECC781F88A6B400E6
-:1046A0000ADCB40BAB8A86BC008AA6BD00AB8B8645
-:1046B000BE00AB83E90676888A464C8AA6B600FE21
-:1046C000CC781988A6B6000ADCB40CABE8DBCBAB1F
-:1046D0008B462AAB83E90676748A464C8AA6B700D5
-:1046E000FECC781988A6B7000ADCB40DABE8BACBCB
-:1046F000AB8B4634AB83E90676538A464C8AA6B820
-:1047000000FECC781988A6B8000ADCB40EABA15024
-:1047100012ABA15212AB83E90676328A464C8AA6C6
-:10472000B500FECC781888A6B5000ADCB40FAB8BB8
-:10473000869A00AB8B869C00AB83E906760F84DB00
-:104740007503E9EFFEB00AE8F8C8E9E7FEB00AE849
-:10475000F0C8F7D983C1368BC10D800086C4A3226F
-:10476000134141890E2013C3A184122BC17211A3DE
-:104770008412BE2213D1E9F36F90890E2013F8C37F
-:10478000F9C3C381EF6A1374F98BC70D800086C427
-:10479000A368134747893E6613C3F7062A01010041
-:1047A00075E08B0E6613E30780F92077D54949330E
-:1047B000C08EC08ED8BF6A138BF703F983C6343B13
-:1047C000FE77C0B00EE8AEC885ED74B78A464C8A55
-:1047D000B6B900FECE781588B6B9008AA6A90080C1
-:1047E000CCC0AB84F67405B00EE856C88AB6BA00E1
-:1047F000FECE78CB8A9EA9008ABEAB008A563F8A3D
-:10480000F332F70AB6AC00C686AC000022F2744B55
-:10481000F6C608740FB402F6C3087502B403AB8081
-:10482000E6F77437F6C601740FB400F6C3017502DB
-:10483000B401AB80E6FE7423F6C602740FB404F62E
-:10484000C3027502B405AB80E6FD740FF6C60474AE
-:104850000AB406F6C3047502B407ABC686BA0000F4
-:10486000889EAB00E958FF90A184122BC17211A35E
-:104870008412BE6813D1E9F36F90890E6613F8C3F2
-:10488000F9C3A1841241412BC17223A384128BC1AD
-:10489000484832E40C8086C4EF9090909090BEDC43
-:1048A000124949D1E9F36F90890EDA12F8C3F9C3BE
-:1048B0008AC88A464CB40183EB06EF9090909090A2
-:1048C000B80100EF90909090908AC1EF90909090F6
-:1048D00090E99700E9AC0033C08ED8891E8412C3DA
-:1048E000368B1E8412FB90FAB00CE889C785ED74F4
-:1048F000E6C5760C83FB1472DBFB90FAAD85C078BD
-:10490000AF74E28BFE03F8368B0E86123BC1770242
-:104910008BC883EB043BD977028BCB33C08A464CE0
-:10492000EF90909090908BC1EF90909090904180FC
-:10493000E1FE2BD951D1E9F36F90598BC74024FE8A
-:104940003BC674272BFE4E4E538B5E103BF3721307
-:10495000031F83C30380E3FEC7070000836E740256
-:10496000895E105B893C89760CEB8989760C3976F7
-:104970001077817208833C007403E977FFE80DBE6D
-:10498000E962FF36891E8412B00CE8B5C633C08ECA
-:10499000D8C3A184123D10007277BA04013B068887
-:1049A000127506C7067E1200008B0EDA12E30BE8C2
-:1049B000D0FE7257C7067E12FF7F8B0E2013E30BCB
-:1049C000E8A5FD7246C7067E12FF7F8B0E6613E3D5
-:1049D0000BE894FE7235C7067E12FF7FA12801A95D
-:1049E00001007503E8F9FE803E8D1200751DA1845B
-:1049F000123D200076153B0682127609A17E123BFD
-:104A0000068012720C800E901280C3B080FF167C5C
-:104A100012C3800E901240C36A001FC6069312177D
-:104A20009C0EE8B7C86A001FC6069312209C0EE8C9
-:104A3000AAC86A001FC6069312169C0EE89DC8906D
-:104A4000BA0601ECA82075CAFB90FABA0401ED90F1
-:104A5000909090903A06941277BE33DB8AD8D1E3D7
-:104A60002E8BAF4400C47E0885FF74B9F6C4C075B0
-:104A70005532C0C1E00280E4F08BF0ED9090909050
-:104A80009085C074BB8BC84180E1FE0BC68B5E5025
-:104A90004B4B2BD9789CAB8BC1404001464ED1E9A2
-:104AA000F36D90895E50897E088B462680E4EF89FD
-:104AB0004626F6C401750CF746480C007505B00291
-:104AC000E87FC5E97AFF86C48BC883E13F4180E176
-:104AD000FEE30A3C807209243FB4F0EBB0E960FFCA
-:104AE000253F0033FF8EC7BF96128BF7D1E9F36DD8
-:104AF000908BC8E848EDE947FF906A001FC606930F
-:104B0000121B9C0EE8D5C790601E0633C08ED88E4F
-:104B1000C0BA0601ECA80474E1B006EEECA28C1257
-:104B2000A8407411A18812A38412C6068D1200E851
-:104B300060FEA08C12A8807403E804FFB80080BA5D
-:104B400022FFEF071F61CF906A001FC60693121B5A
-:104B50009C0EE887C790601E0633C08ED88EC0BA00
-:104B60000601ECA80474E1BA0801ECA28C12A8407A
-:104B70007411A18812A38412C6068D1200E812FED9
-:104B8000A08C12A8807403E8B6FEB80080BA22FF99
-:104B9000EF071F61CF90EE86E0EE86E0EC86E0EC5A
-:104BA00086E080E1FEF36C9080E1FEF36E900500FC
-:104BB0007547A84B05007548A84B0500A348A84BAE
-:104BC00005003549A84B06009848964B0600BA48A0
-:104BD000964B0600C348964B0600CB48964B060002
-:104BE0002049964B06002849964B06004E4A9C4B9E
-:104BF00006007B4A9C4B05009E4AA24B0500EC4AEE
-:104C0000A24B00001E06833E4412007409A0060158
-:104C100024303C30741A8CC88ED88EC0BBAE4B8BFF
-:104C20000FE30D8B7F028B7704F3A483C306EBEFB6
-:104C3000071FC39033C0A33E01B90C01BE40018BD6
-:104C4000FE81C6B40F89048BC62BF13BC777F6A350
-:104C50003C01C3901E0660368B2E3E018B5E003BEE
-:104C6000EB742B8B7602891C89770236A13C018973
-:104C7000460036892E3C018BEBFF4E0674088B6E86
-:104C800000FF4E0675F836892E3E018B66046107DB
-:104C90001FC31E0660368B2E3E0198894606896624
-:104CA000043B6E0074108B6E00FF4E0675F836895B
-:104CB0002E3E018B660461071FC3C3901E06609CD5
-:104CC000FA33ED8EDD8B2E3C0185ED743D8B4E006D
-:104CD000890E3C018BCC8DA60A01561E06608966A2
-:104CE00004C746080F1AC7460601008B1E3E018501
-:104CF000DB741D8BC58707894600895E028BD889C6
-:104D00006F028BE19D61071FF8C39D61071FF9C307
-:104D1000892E3E01896E00896E0287E19D8BE1EB51
-:104D2000E4000D0A5465726D696E616C73207375D1
-:104D300070706F727465643A0D0A312920414E53C8
-:104D40004920636F6D70617469626C650D0A322968
-:104D500020577973652033300D0A506C6561736597
-:104D60002073656C6563743A20000D0A636F646597
-:104D7000207365676D656E743D000D0A4D6F6E6939
-:104D8000746F722076322E350A0D0A3E000D0A50DD
-:104D90006172646F6E3F000D0A4E6F206164647231
-:104DA00065737320737065636966696564000D0AD5
-:104DB0003A000D0A004C6F633D000D0A4641544114
-:104DC0004C204552524F523D000D0A4D6F6E697492
-:104DD0006F7220636F6D6D616E64733A2D0D0A20E2
-:104DE0002020442C645B5B787878783A5D7878781A
-:104DF000785D202D2064756D70206D656D6F727902
-:104E00000D0A2020204C2C6C5B5B787878783A5D1A
-:104E1000787878785D202D2064756D702073696EC8
-:104E2000676C65206C696E650D0A202020452C6535
-:104E30005B5B787878783A5D787878785D202D209B
-:104E400065646974206D656D6F72790D0A2020208C
-:104E5000462C665B5B78787878205D787878785D2A
-:104E6000202D2066696C6C206D656D6F72792070E5
-:104E70006172616772617068730D0A202020495B5E
-:104E8000787878785D202020202020202020202D78
-:104E900020776F726420696E7075742066726F6D12
-:104EA00020706F72740D0A202020695B7878787802
-:104EB0005D202020202020202020202D20627974B9
-:104EC0006520696E7075742066726F6D20706F72E8
-:104ED000740D0A2020204F78787878207878202068
-:104EE000202020202020202D206F757470757420C4
-:104EF000776F726420746F20706F72740D0A2020B7
-:104F0000206F787878782078782020202020202042
-:104F100020202D206F75747075742062797465205F
-:104F2000746F20706F72740D0A202020475B5B78CD
-:104F30007878783A5D787878785D2020202D206721
-:104F40006F746F20616464726573730D0A20202092
-:104F5000575B5B787878783A5D787878785D202050
-:104F6000202D207761746368206120776F72640D53
-:104F70000A20202043202020202020202020202024
-:104F800020202020202D20696E7465727275707447
-:104F900073206F66660D0A202020532020202020D9
-:104FA00020202020202020202020202D20696E7409
-:104FB00065727275707473206F6E0D0A20202073F5
-:104FC00020202020202020202020202020202020E1
-:104FD0002D2073696E676C6520737465700D0A20EF
-:104FE000202042787878782020202020202020203F
-:104FF0002020202D20627265616B706F696E7420B5
-:105000007365740D0A20202062202020202020209B
-:105010002020202020202020202D20627265616B1E
-:10502000706F696E7420636C6561720D0A202020B8
-:10503000522020202020202020202020202020203E
-:10504000202D207265737461727420627265616BC9
-:10505000706F696E740D0A2020207220202020209D
-:1050600020202020202020202020202D2072656755
-:105070006973746572732061742062726B70740D51
-:105080000A202020582C78206E202020202020204C
-:1050900020202020202D206578616D696E652063B9
-:1050A00068616E6E656C206E0D0A202020482C3FD2
-:1050B00020202020202020202020202020202D20E3
-:1050C00074686973206D657373616765001B5B327B
-:1050D0004A1B5B313B3148414E5349205465726D48
-:1050E000696E616C0D0A0A001B5B4B001B5B4A007A
-:1050F0001B5B324A1B5B313B3148001B5B44201B6E
-:105100005B44001B5B313B373248001B5B003B00BC
-:1051100048001B5B73001B5B75001B7A2B0B7F1B0E
-:105120007A2E0C7F1B7A2D087F1B7A2C0A7F1B7A24
-:1051300022087F1A57797365203330205465726DC9
-:10514000696E616C0D0A001B54001B59001A001E89
-:105150000008200800001B3D0000001B46000D0059
-:105160003F4464456546664767486849694F6F43F1
-:1051700063537342625272577758784C6C3C60D4D8
-:1051800057D45750585058D659D659B459B4593C99
-:10519000603C606C57485726570657905790579871
-:1051A00057485F0C5F585F335F405FA057A057FEC2
-:1051B00059FE59DC57DC5788619861C061CC61D8D1
-:1051C00061F66102622262F8564A625862605920B2
-:1051D00020666C6167733D00202061783D002020CF
-:1051E00062783D00202063783D00202064783D00F7
-:1051F000202063733D00202064733D0020206573F0
-:105200003D00202073733D00202064693D00202074
-:1052100073693D00202062703D00202073703D00C6
-:10522000202069703D00206368616E656C3D002040
-:105230002020207365673D002074695F7374723DA0
-:10524000002074695F746F733D002074695F6D6145
-:10525000783D002074695F6261733D002074695F6E
-:1052600073697A3D002074695F7374663D00207431
-:10527000695F726F6F3D002074695F666C673D0007
-:105280002074695F746F743D002072695F70636E93
-:105290003D002072695F7374723D002072695F7314
-:1052A00074663D002072695F726F6F3D0020726905
-:1052B0005F6261733D002072695F73697A3D00200F
-:1052C00072695F746F743D002072695F6D696E3D35
-:1052D000002072695F666C673D002072695F746FC1
-:1052E000733D002072695F7468723D002074685FCE
-:1052F0007374663D002074685F7374723D0020749F
-:10530000685F6261733D002074685F73697A3D0075
-:105310002074685F7472673D002074685F666C6714
-:105320003D002074685F636E743D002072685F7397
-:1053300074723D002072685F7374663D002072686D
-:105340005F6261733D002072685F73697A3D00207F
-:1053500072685F7370613D002072685F61736F3DBA
-:10536000002072685F726F6F3D002072685F666C2C
-:10537000673D00206D5F636172653D002070745F62
-:10538000666C6F3D002061735F666C6F3D0020723C
-:105390006D5F666C6F3D00202020715F696E3D007F
-:1053A0002020715F6F75743D0020715F6472616EC3
-:1053B0003D002020715F74696D3D00202020715FE9
-:1053C00066633D0020715F737461743D0020715FFE
-:1053D000646174613D0020715F6D6F646D3D0020FC
-:1053E00068616E645F6F3D002068616E645F623D5E
-:1053F000002068616E645F653D002068616E645FD7
-:10540000693D0020206F706F73743D002020746927
-:105410006D656F3D0020637573746D313D002063D1
-:105420007573746D323D0020637573746D643D0057
-:10543000207478726174653D0020727872617465C1
-:105440003D002020635F6D61703D0020635F6164FB
-:1054500064723D0020635F616973723D0020635F89
-:10546000787461673D0020635F646566723D00206B
-:10547000635F666C73683D002074786D6178733D7E
-:10548000002072695F656D733D002020635F6C735F
-:10549000723D002020635F6965723D002020635FDC
-:1054A0006663723D002020635F6D63723D002020C3
-:1054B000635F6C63723D002020635F6473733D0023
-:1054C00020635F647373693D0020635F647373726C
-:1054D0003D002020635F6973723D002020635F639D
-:1054E00061723D002020635F6566723D0020635F4E
-:1054F000657273743D0020635F65636E743D0020C8
-:10550000635F62726B633D0020635F626F6B633D3C
-:105510000020635F7265706C3D0020635F6363739E
-:10552000723D0020635F737474313D0020635F73CC
-:105530007474323D002BC08ED88EC0E8C200E8E5FE
-:1055400000FABF8400C705DC568C4D02BF0C00C7B3
-:10555000056E5E8C4D02BF0400C705BA5E8C4D021D
-:10556000E8F10090E84901E81600F490E8E500BE93
-:10557000BA4DE8090CA09312E85D0CE8C209EBE40F
-:10558000E8D50CE8C40C0AC074F68B1EF8793C0D03
-:10559000742E3C0874173C7F741383FB207FE188D2
-:1055A00087D67943891EF879E8770CEBD30BDB7447
-:1055B000CF4B891EF8798B36167AE8C10BEBC19078
-:1055C000E80200EBBBC687D679000BDB741EA0D6C1
-:1055D00079BF6051B91D008BD9060E07F2AE077571
-:1055E00017412BD9D1E32EFF977D519033C0A3F8FB
-:1055F00079BE894DE8870BC3BE8D4DE8800BEBEC7F
-:10560000BA0002B093EEB055EEBA1002B093EEB00D
-:10561000AAEEBA0002EC3C557508BA1002EC3CAA9E
-:105620007403E82FF6C3BA0402B01AEEB020EEB04D
-:1056300030EEB040EEB080EEBA0002B013EEB0072C
-:10564000EEBA0802B080EEBA0202B0BBEEBA0402B3
-:10565000B005EEC3C606CA1301C706F8790000C636
-:1056600006F67901C706D0790000C706D279000096
-:10567000C706D4790000C706FA790000C706FC798E
-:105680000000C706FE790000C706007A0000C706C2
-:10569000027ACE598C0E047AC706067A0000C70635
-:1056A000277A0000C606297A00C6062A7A00C39027
-:1056B000BE224DE8C80AE83F002C313C0177F7E8EC
-:1056C00081098B360C7AE8B50ABE6A4DE8AF0A0E3E
-:1056D00058E8F80ABE7A4DE8A40AC39060D1E38383
-:1056E000FB1873111EBA00008EDA2EFF97B7518B8C
-:1056F000EC8946101F61CF90E84F0B0AC07505E892
-:10570000560BEBF4C390833EF879017416BED7793B
-:10571000E8310A8BD0AC3C2C74043C207505E8239E
-:105720000AEEC3E9D2FE833EF8790174F6BED7795A
-:10573000E8110A8BD0AC3C2C74083C207404E9B707
-:10574000FE90E8FF09EFC3908B16067A833EF87946
-:1057500001740BBED779E8EB098BD0A3067AB02091
-:10576000E8570B8B16067AECE86F0BC38B16067A9C
-:10577000833EF87901740BBED779E8C7098BD0A3B3
-:10578000067AB020E8330B8B16067AEDE8670BC378
-:10579000FAC606F67900C390C606F67901FBC390F7
-:1057A00006E85809B020E8110B268B05E8470BB036
-:1057B00008E8060BE8030BE8000BE8FD0AB8010057
-:1057C000E8CFF4BA0202EC24017502EBDCBA06025F
-:1057D000EC07C390C706087A1000EB06C706087AE4
-:1057E0000100068E06FC798B3EFA79E80E09E80B7B
-:1057F00000893EFA798C06FC7907C390BEB24DE869
-:105800007C098B16087A52E82A09E80F0AE80C0A84
-:1058100033DBB9100090268A01E8BC09E8FD094392
-:10582000E2F4E8F709E8F40933DBB9100090268ABE
-:10583000013C2072053C7E760390B02EE8E30943DC
-:10584000E2ECBEB24DE8360983C7105A4A75B7C3B9
-:10585000068E06007A8B3EFE79E8A008893EFE7926
-:105860008C06007A578B360E7AE81209C706087A3A
-:105870001000BA0002E8E800E881FF5FBA0000E823
-:10588000DE00BEB54DE8F6088CC0E83F09B03AE846
-:1058900090098BC7E83509E87E08E8C30090E8B7AF
-:1058A00009E8A6090AC074F63C0B750683EF10EBF5
-:1058B00019903C0A750683C710EB0F903C0C7504D9
-:1058C00047EB07903C0875244F908B36FE798BC7C9
-:1058D0002BC63D000172A53D1001720483EE20909D
-:1058E00083C6108936FE79578BFEEB803C2E7508F7
-:1058F000BA0113E86A0007C3C6060A7A0232C990E1
-:105900003C30724C3C39760C245F3C4172423C4640
-:10591000773E2C072C3050E8CC085802C8FE0E0AFF
-:105920007A740FC0E104E82F09E81E090AC074F672
-:10593000EBCE26880DE8E0078AD0E823008AC13C38
-:105940002072053C7E760390B02EE8D508E970FF02
-:10595000E8C507E80A00268A05E87C08E91DFF90EB
-:10596000F606267A02750286F2528B361A7AE80D0E
-:10597000085A528AC60206247AF606267A01750665
-:10598000E89F08EB0D9032E4E80D088B361C7AE8AE
-:10599000EC075A8AC20206257AF606267A017506AF
-:1059A000E87F08EB069032E4E8ED078B361E7AE8D4
-:1059B000CC07C390068E06047A8B3E027AE83C0739
-:1059C000893E027A8C06047A07FF1E027AC3BE97CC
-:1059D0004DE8AA07CB900657BED779E866078BD863
-:1059E000E861078BC82BCB78118EC3BF0000B8FFCE
-:1059F000FF51B90800F3AB59E2F75F07C39006BE49
-:105A0000D779E83F078BD8D1E32E8B9F4400BE2681
-:105A100052E8F1088BC3E8DD08B80100E873F2E84A
-:105A2000E008BE2F52E8DD088B4718E8C808BE77AB
-:105A300052E8D1088B4726E8BC08BE5352E8C50897
-:105A40008B471EE8B008BE5C52E8B9088B4720E8D7
-:105A5000A408BE6E52E8AD088B4724E89808BE80C3
-:105A600052E8A1088B472AE88C08E89508BE38520E
-:105A7000E892088B07E87E08BE4152E887088B470A
-:105A80001AE87208BE4A52E87B088B471CE8660891
-:105A9000BE6552E86F088B4722E85A08E86308BEE3
-:105AA000D152E860088B4738E84B08BEAD52E85445
-:105AB000088B4730E83F08BEB652E848088B4732AB
-:105AC000E83308BEA452E83C088B472EE82708BEFE
-:105AD000BF52E830088B4734E81B08E82408BE8929
-:105AE00052E821088B4704E80C08BE9252E81508DA
-:105AF0008B4714E80008BE9B52E809088B472CE846
-:105B0000F407BEC852E8FD078B4736E8E807BEDA5F
-:105B100052E8F1078B473AE8DC07BEE352E8E507B5
-:105B20008B473CE8D007E8D907BE1953E8D6078B66
-:105B30004748E8C107BEFE52E8CA078B4742E8B5AE
-:105B400007BE0753E8BE078B4744E8A907BE7C534E
-:105B5000E8B2078B474CE89D07BE8553E8A6078B44
-:105B6000474EE89107BE8E53E89A078B4750E88569
-:105B700007E88E07BE2253E88B078B474AE8760773
-:105B8000BEEC52E87F078B4708E86A07BEF552E88B
-:105B900073078B4740E85E07BE1053E867078B47E3
-:105BA00046E85207E85B07BE6A53E858078B477A16
-:105BB000E84307BE3D53E84C078B4770E83707BE04
-:105BC0004653E840078B4772E82B07BE4F53E83433
-:105BD000078B4774E81F07E82807BE2B53E8250703
-:105BE0008B470CE81007BE3453E819078B4710E8C1
-:105BF0000407BE5853E80D078B4776E8F806BE61E8
-:105C000053E801078B4778E8EC06BE7353E8F506C6
-:105C10008B473EE8E006E8E906BE9753E8E6068BC8
-:105C20004752E8D106BEA053E8DA068B4754E8C5D0
-:105C300006BEA953E8CE068B4756E8B906BEB25356
-:105C4000E8C2068B4758E8AD06BEBB53E8B6068BE4
-:105C5000475AE8A106BEC453E8AA068B475CE895FC
-:105C600006E89E06BECD53E89B068B475EE8860697
-:105C7000BED653E88F068B4760E87A06BEDF53E84E
-:105C800083068B4762E86E06BEE853E877068B47CB
-:105C90007CE86206BEF153E86B068B477EE8560649
-:105CA000BEFA53E85F068B878000E84906E8520693
-:105CB000BE4254E84F068B879E00E83906BE035467
-:105CC000E842068B4764E82D06BE0C54E836068B86
-:105CD000476EE82106BE1554E82A068B878E00E839
-:105CE0001406BE1E54E81D068B879000E80706BE0A
-:105CF0002754E810068B879200E8FA05E80306BEF1
-:105D00003054E800068B879400E8EA05BE3954E871
-:105D1000F3058B879600E8DD05BE6F54E8E6058B3A
-:105D2000879800E8D005BE5D54E8D9058A87A000B1
-:105D3000E8A705BE5454E8CC058A4728E89B05BE71
-:105D40006654E8C0058A87A100E88E05E8B305BE61
-:105D50007854E8B0058A87A200E87E05BE8154E841
-:105D6000A3058A87A300E87105BE8A54E896058AD0
-:105D700087A400E86405BE9354E889058A87A500D6
-:105D8000E85705BE9C54E87C058A87A600E84A05CA
-:105D9000BEA554E86F058A87A700E83D05BEAE544E
-:105DA000E862058A87A800E83005E85505BEB754C3
-:105DB000E852058A87A900E82005BEC054E84505D9
-:105DC0008A87AA00E81305BEC954E838058A87AB5C
-:105DD00000E80605BED254E82B058A87AD00E8F935
-:105DE00004BEDB54E81E058A87AE00E8EC04BEE47E
-:105DF00054E811058A87AF00E8DF04BEED54E804DB
-:105E0000058A87B000E8D204E8F704BEF654E8F447
-:105E1000048A87B100E8C204BEFF54E8E7048A8719
-:105E2000B200E8B504BE0855E8DA048A87B300E892
-:105E3000A804BE1155E8CD048A87BB00E89B04E89E
-:105E4000C004BE1A55E8BD048A87BC00E88B04BEB6
-:105E50002355E8B0048A87BE00E87E04BE2C55E8CE
-:105E6000A3048A87BF00E87104E8960407C36006AC
-:105E70001E168BECFF4E16F7461A00027401FBB893
-:105E800000008ED88EC0892E2D7AE8CB0081661A4C
-:105E9000FFFEC6062A7A00E8D800B8005FA32B7A76
-:105EA000E85D00803E2A7A00740A814E1A0001C61D
-:105EB000062A7A00171F0761CF9060061E168BEC2A
-:105EC000F7461A00027401FBB800008ED88EC08914
-:105ED0002E2D7A81661AFFFEC6062A7A00E8920005
-:105EE000B8005FA32B7AE81700803E2A7A00740A74
-:105EF000814E1A0001C6062A7A00171F0761CF904B
-:105F0000B8F000E88CEDFF262B7AC390065356803C
-:105F10003E297A007403E83F00BED779E825028B5A
-:105F2000D8A3277A2E8A07A2297AB0CC2E88075EBA
-:105F30005B07C3C6062A7A00B80A5FA32B7AC39010
-:105F40008B2E2D7AE82B00C3C6062A7A01E80800BA
-:105F5000B80A5FA32B7AC39057803E297A00740F4A
-:105F60008B3E277AA0297A2E8805C606297A005FFB
-:105F7000C390BEB24DE80602BED851E80002FF76DB
-:105F80001458E84702BEDE51E8F301FF760E58E8E8
-:105F90003A02BEE451E8E601FF761258E82D02BE4F
-:105FA000EA51E8D901FF761058E82002BE1452E801
-:105FB000CC01FF760A58E81302BE1A52E8BF01FF6F
-:105FC000760C58E80602BECF51E8B201FF761A58A7
-:105FD000E8F901BEB24DE8A501BEF051E89F01FF0E
-:105FE000761858E8E601BEF651E89201FF760258AD
-:105FF000E8D901BEFC51E88501FF760458E8CC01E0
-:10600000BE0252E87801FF760058E8BF01BE085290
-:10601000E86B01FF760658E8B201BE0E52E85E0159
-:10602000FF760858E8A501BE2052E85101FF761618
-:1060300058E89801BE894DE84401C390BEC94DE8B7
-:106040003C01C33C0074053C017459C3C7060C7A7B
-:10605000CD50C7060E7AF050C706107AE850C70632
-:10606000127AEC50C706147AF450C706167AFB5021
-:10607000C706187A0351C7061A7A0B51C7061C7A4D
-:106080000E51C7061E7A1051C706207A1251C70654
-:10609000227A1651C606247A01C606257A01C6065A
-:1060A000267A03C3C7060C7A1A51C7060E7A4D51D9
-:1060B000C706107A4751C706127A4A51C706147AA2
-:1060C0004F51C706167A5151C706187A5551C7065F
-:1060D0001A7A5651C7061C7A5951C7061E7A5A5168
-:1060E000C706207A5B51C706227A5E51C606247A1B
-:1060F00020C606257A20C606267A02C3A1F879486A
-:106100007414BED779E83C008BF8AC3C3A75078E26
-:10611000C7E830008BF8C3908BC72B06FE798AF056
-:10612000240F8AD002D002D080C20BC0EE0480C6F9
-:1061300003043DC38CC0E89300B03AE8E4008BC789
-:10614000E88900C35133C990AC3C2074FB900AC06D
-:1061500074262C3072223C0976143C11721A2C07DA
-:106160003C0F760A3C2A72102C203C0F770A98C10B
-:10617000E10403C8ACEBD7904E8BC159C390068C99
-:10618000C88EC0E8020007C3268A04460AC0740607
-:10619000E88F00EBF390C3900BC0747A5133D2B9FF
-:1061A000E803F7F18BCAE803008BC159BA6400F623
-:1061B000F2E80C008AC498B20AF6F2E802008AC437
-:1061C000500AF074050430E8580058C386C4E80744
-:1061D0000086C4E80200C390C1C804E80800C1C03A
-:1061E00004E80200C3905350240FBBCA622ED7E8C4
-:1061F0003000585BC39086C4E8070086C4E80200FC
-:10620000C39050B908008AE032C0D1C00430E81110
-:1062100000E2F558C390B030E80700C3B020E801B1
-:1062200000C3568B36D0798884D0774681E6FF014B
-:10623000FF06D4798936D079813ED479FE0175087C
-:1062400056E814005EEBF1905EC3BA0202EC240142
-:106250007404BA0602ECC390803EF67900740960BB
-:10626000B80100E82CEA6190BA0202ECA804742894
-:106270008B36D279833ED47900741D8A84D07746D8
-:1062800081E6FF018936D279FF0ED479BA0602EE93
-:10629000BA0202ECA80475DCA1D479C352BA060292
-:1062A000EE5AC3905250BA0202ECA8047408585A2D
-:1062B000E8E9FFF9C390585AF8C35250BA0202EC09
-:1062C000A80474FB585AE8D3FFC330313233343555
-:1062D0003637383941424344454653508AE080E4DA
-:1062E0000FBBCA62C0E8042ED7E8CEFF8AC42ED7FF
-:1062F000E8C7FF585BC386E0E8DFFF86E0E8DAFF27
-:10630000C390BEB24D502EAC3C007405E8ABFFEB21
-:10631000F558C390C808000056578B7604BF040098
-:10632000C746FC0000C746FA0000C746F8000083D5
-:106330007E0600750E56E8B60E590BC075058BC764
-:10634000E95B018B46FC8946FE0BFF7505B8010031
-:10635000EB0233C05056E8A40D5959B4008946FCED
-:106360008B5EFC83FB087603E92B01D1E32EFFA7AC
-:10637000B264B80300E92601837EFA007414C746AC
-:10638000FA00008A445898508A44599850E8C20F3D
-:106390005959837EF800740AC746F8000056E89BF6
-:1063A0000859837E060075058BC7E9F10083FF0459
-:1063B0007503E9E6008BC7E9E400837EFE00750300
-:1063C000BF0200E9D500837EFE007503BF0100E92E
-:1063D000C9008B5EFE83FB077603E98600D1E32EBE
-:1063E000FFA7A26433FFE97F00BF0400807C580F41
-:1063F0007422837EF800751CFE44586A0856E87EB5
-:106400000C59598A445804805056E8720C5959C79F
-:1064100046FA0100837EF800740AC746F800005669
-:10642000E8190859EB42BF0400807C5800742283AD
-:106430007EF800751CFE4C586A0856E8410C595904
-:106440008A445804805056E8350C5959C746FA0119
-:1064500000837EF800740AC746F8000056E8DC079F
-:1064600059EB05BF0400EB00EB31BF0400EB2CC778
-:1064700046F801006A0856E8050C5959807C58090D
-:106480007D04B00FEB02B00004805056E8F00B59C9
-:1064900059BF0400EB05BF0400EB00E9A5FE5F5EF9
-:1064A000C9C3E4636364636463646364E963266427
-:1064B00051647863BA63C6639664D2636A646A643B
-:1064C0006F647263C808000056578B76048B7E0891
-:1064D0006A0156E8A90B59598A4606C0E0060480AD
-:1064E0005056E89A0B5959C746FE0000897EF8EBD2
-:1064F00003FF46FE8B5EF8FF46F8803F0075F2838F
-:106500007EFE107D25B810002B46FED1F88946FC92
-:10651000C746FA0000EB0B6A2056E8620B5959FF98
-:1065200046FA8B46FA3B46FC7CEDEB0C8BDF478A48
-:10653000075056E8490B5959803D0075EF6A0256DD
-:10654000E83C0B5959EB005F5EC9C3C80400005614
-:10655000578B7E04C746FE0000BE1400E909018B7C
-:106560005EFE83C3042BDF8A87AC0B88445AC64483
-:1065700058088A46FE884459C744060000C6441994
-:1065800000C6441A00C6441B00C6441D0DC6441E66
-:1065900003C6441F00C6442000C6442100C6445B15
-:1065A00000C6445D00C6445E00C6445F00C6446049
-:1065B00000C746FC0000EB0D8B5EFCD1E3C740300A
-:1065C0000000FF46FC837EFC107CEDC746FC00000B
-:1065D000EB0A8B5EFCC6405000FF46FC837EFC0449
-:1065E0007CF0C744540000C7445600008A445A98BF
-:1065F000BAF80023D0B805000BC28946FC9CFA8A81
-:1066000046FCBAFE00EEBA0000EC9D24088846FC69
-:10661000837EFC007502EB4AFF76FEE87A0C59682F
-:10662000350256E8320A59590BC07534683802569B
-:10663000E8250A59590BC0752768420256E8180A1E
-:1066400059590BC0751A684C0256E80B0A59590B78
-:10665000C0750D68560256E8FE0959590BC0740200
-:10666000EB00FF46FE83C662397EFE7D03E9EFFE46
-:10667000EB005F5EC9C3C808000056578B4604BADA
-:106680006200F7EA0514008BF0837E06007405B8FB
-:106690001000EB03B808008944048A460888445C6B
-:1066A00056E85904598BF88BC78944568944548A53
-:1066B000445D88442F0BFF751D68C20F6A0156E8C0
-:1066C00002FE83C406EB006A0156E847FC59590BE9
-:1066D000C075F4BF0100897EFAB90500BBE96A2ED6
-:1066E0008B073B46FA74074343E2F4E9A4032EFF09
-:1066F000670AC744060200C74408F4088B5E04D149
-:10670000E38B87FC0889440A33C08BF8894454E939
-:10671000800356E8BB0559BF01008A445D88446088
-:10672000E96F03837C04087530807C5C0175158AF1
-:10673000445DB400D1E08BD8FFB7E40856E8F70811
-:106740005959EB138A445DB400D1E08BD8FFB7C42C
-:106750000856E8E2085959EB2E807C5C0175158AD1
-:10676000445DB400D1E08BD8FFB7D40856E8C70821
-:106770005959EB138A445DB400D1E08BD8FFB7B40C
-:106780000856E8B20859596A0156E887FB59598BEF
-:10679000D883FB03772AD1E32EFFA7E16ABF01006C
-:1067A0008A445D88445EEB188A445D04FF240788B0
-:1067B000445DEB0C8A445DFEC0240788445DEB0019
-:1067C000E9CF028A445DB400D1E08BD8FFB7FD0267
-:1067D00056E863085959681D0356E85A0859596A1A
-:1067E0000156E82FFB59598BD883FB037736D1E349
-:1067F0002EFFA7D96ABF01008A445D88445FEB245D
-:106800008A445D04FF8A540480C2FF22C288445D2A
-:10681000EB128A445DFEC08A540480C2FF22C28803
-:10682000445DEB00E96B028B5C0683C3FED1E38B16
-:10683000400889048B1CFF77066A0056E885FC83B4
-:10684000C4068B5C064BD1E38B40088944028B5C09
-:1068500002FF77066A0156E86AFC83C4066A01569D
-:10686000E8B1FA59598BD883FB037603E91F02D1AB
-:10687000E32EFFA7D16A8B5C028B47048944028B0D
-:106880005C02803F44750D8B5C028A4701B4003B7B
-:1068900044047DE28B4604D1E08B1C03D88B440278
-:1068A0008947088B5C064BD1E38B4402894008E999
-:1068B000DE018B5C028B47028944028B5C02803FC5
-:1068C00044750D8B5C028A4701B4003B44047DE2B1
-:1068D0008B4604D1E08B1C03D88B44028947088B7C
-:1068E0005C064BD1E38B4402894008E9A201BF0159
-:1068F00000E99C018B5C028A07B4008946F8B90C58
-:1069000000BBA16A2E8B073B46F874074343E2F4B1
-:10691000E977012EFF67188B4604D1E08B5C0203F8
-:10692000D88B47088B5C06FF4406D1E38940088B6F
-:106930001C807F010074128B5C028A47018B1C8AC9
-:106940005701B6008BDA884018E94001FF4C06E990
-:106950003A018B5C028A47018B1C8A5701B6008B77
-:10696000DA884018E925018B5C028A47018B1C8A72
-:106970005701B6008BDA884018FF4C06E90D018BF1
-:106980005C028A47018B1C8A5701B6008BDA3040C3
-:1069900018E9F800B8F0108BF88944548A445F88ED
-:1069A000445DE9E7008A441C983D020074073D03FA
-:1069B000007402EB07C746FE0000EB2B8A441C98CC
-:1069C000D1E08BD8FFB7690256E86B0659596A01C6
-:1069D00056E840F959598946FE837EFE00740683C5
-:1069E0007EFE0375E9EB00837EFE0374628A441C1D
-:1069F00098D1E08BD8FFB76D0256E83A0659595640
-:106A0000E84D97598946FC8B5EFC83EBFE83FB03C4
-:106A10007733D1E32EFFA7996A68AC0256E81706D0
-:106A20005959EB23688F0256E80C065959EB186840
-:106A3000750256E801065959EB0D68C60256E8F68C
-:106A4000055959EB02EB006A0156E8C7F85959BFDE
-:106A50000100EB3868DD0256E8DC0559596A015639
-:106A6000E8B1F85959BF0100EB22B8D0308BF88952
-:106A700044548A446088445DEB12B8E0208BF88966
-:106A800044548A445E88445DEB02EB00EB02EB0069
-:106A9000EB00E941FC5F5EC9C3196A246A2F6A3AB8
-:106AA0006A0000010002000400410042004300446B
-:106AB00000800081008200FF001769546A7A6AA58D
-:106AC00069526994696A6A676952697F6967694C42
-:106AD00069F4687668B268EE68F56700681268F570
-:106AE000679D67A867B4679D6700000100F010E02C
-:106AF00020D0302768F266C36723671267C8040096
-:106B00000056578B76048A4459988946FC6A098B4B
-:106B100046FC05840150E8930859598BF88BC7252A
-:106B200000F03D001075558BC725F0003DF0007555
-:106B30004B8BC725000FC1F8088946FE8B44043BE8
-:106B400046FE7D0533C0E9EF008BC7250F00BA0F65
-:106B5000002BD03B56FE740533C0E9DB00C744026E
-:106B600004098A46FE88445F88445D8B5EFCD1E35D
-:106B7000C787FC080409B8F010E9BC008BC72500E2
-:106B8000F03D002075528BC725F0003DE0007548B0
-:106B90008BC725000FC1F8088946FE837EFE087E5C
-:106BA0000533C0E992008BC7250F00BA0F002BD028
-:106BB0003B56FE740533C0EB7F90C744020C098A34
-:106BC00046FE88445E88445D8B5EFCD1E3C787FC4B
-:106BD000080C09B8E020EB608BC72500F03D0030C1
-:106BE00075528BC725F0003DD00075488BC7250036
-:106BF0000FC1F8088946FE8B44043B46FE7D0433F2
-:106C0000C0EB358BC7250F00BA0F002BD03B56FECB
-:106C1000740433C0EB22C7440214098A46FE884438
-:106C20006088445D8B5EFCD1E3C787FC081409B81B
-:106C3000D030EB0433C0EB005F5EC9C3C806000070
-:106C4000568B76046A0856E8350459598A44580424
-:106C5000805056E8290459598B44543B4456750AD0
-:106C60008A445D3A442F7502EB648B445489445640
-:106C70008B5C028A470188442F8A445DB400C1E0DE
-:106C8000088B54540BD08A445DB400BB0F002BD842
-:106C90000BD38956FE6A108A445998050400990559
-:106CA000400183D2005250E8540883C4068956FC40
-:106CB0008946FA8B46FE0946FA834EFC006A19FFA4
-:106CC00076FCFF76FAE8730783C406E8FE075EC920
-:106CD000C3C81C000056578B5E048A4759988BF036
-:106CE0008B5E048A475DB4008946E6837EE6007DBC
-:106CF0000A8B5E048B4704488946E68B5E048B470B
-:106D0000043B46E67F05C746E600008B5E048A46E4
-:106D1000E688475D8BDED1E38B9F5902C647022090
-:106D20008BDED1E38B9F5902C64703308BDED1E364
-:106D30008B9F6102C64702208BDED1E38B9F6102ED
-:106D4000C64703308B46E68946FA837EFA007418FC
-:106D50008B46FABB0A0033D2F7F380C2308BDED108
-:106D6000E38B9F5902885703BB0A008B46FA33D244
-:106D7000F7F38946FA837EFA0074188B46FABB0A49
-:106D80000033D2F7F380C2308BDED1E38B9F590200
-:106D90008857028B46E68946FA837EFA0074188B80
-:106DA00046FABB0A0033D2F7F380C2308BDED1E360
-:106DB0008B9F6102885703BB0A008B46FA33D2F7D8
-:106DC000F38946FA837EFA0074188B46FABB0A00F0
-:106DD00033D2F7F380C2308BDED1E38B9F61028820
-:106DE00057028B5EE6D1E3FFB712026A00FF76041A
-:106DF000E8D1F683C40668D30F6A01FF7604E8C3BE
-:106E0000F683C406FF76E656E8019359598956F28F
-:106E10008946F0FF76E656E8149359598956EE896B
-:106E200046EC9CFAC45EF0268B078946EAC45EEC09
-:106E3000268B078946E8BA50FFED8946FE9DC74676
-:106E4000E40100E8EEA0BA50FFED8946FC8B46FC59
-:106E50002B46FE3DE8037303E980019CFABA50FF1C
-:106E6000ED8946FC8B46FC2B46FE8946F8C45EF055
-:106E7000268B072B46EA8946F6C45EF0268B0789E7
-:106E800046EAC45EEC268B072B46E88946F4C45ECE
-:106E9000EC268B078946E8BA50FFED8946FE9D81B6
-:106EA0007EF8E803761CFF76F8FF76F6E87601595F
-:106EB000598946F6FF76F8FF76F4E8680159598952
-:106EC00046F4BF0E00EB178BDED1E38B9F5902C651
-:106ED00001208BDED1E38B9F6102C601204783FF37
-:106EE0001176E48BDED1E38B9F5902C6470D308BC0
-:106EF000DED1E38B9F6102C6470D30837EF60977B2
-:106F000005B80D00EB26837EF6637705B80E00EB1F
-:106F10001B817EF6E7037705B80F00EB0F817EF645
-:106F20000F277705B81000EB03B811008BF8EB259D
-:106F30008B46F6BB0A0033D2F7F380C2308BDED12A
-:106F4000E38B9F590288114FBB0A008B46F633D260
-:106F5000F7F38946F6837EF60075D5837EF40977CC
-:106F600005B80D00EB26837EF4637705B80E00EBC1
-:106F70001B817EF4E7037705B80F00EB0F817EF4E9
-:106F80000F277705B81000EB03B811008BF8EB253D
-:106F90008B46F4BB0A0033D2F7F380C2308BDED1CC
-:106FA000E38B9F610288114FBB0A008B46F433D2FA
-:106FB000F7F38946F4837EF40075D58BDED1E3FFC9
-:106FC000B75902FF7604E86E0059598BDED1E3FF12
-:106FD000B76102FF7604E85E0059596A00FF760443
-:106FE000E831F359598BD883FB04771FD1E32EFF87
-:106FF000A71B70EB22C746E40000FF4EE6EB0CC770
-:1070000046E40000FF46E6EB02EB00837EE40074FA
-:1070100003E92AFEE9D4FC5F5EC9C3F36FF56FFF95
-:107020006FF36F0970558BEC8B4604B9E803F7E1F9
-:107030008B4E06F7F15DC3558BEC568B7606EB0E47
-:107040008BDE468A0750FF7604E833005959803CAE
-:107050000075EDEB005E5DC3558BEC568B7606EB51
-:10706000148BDE468A0750FF7604E8450059590B19
-:10707000C07402EB07803C0075E7EB005E5DC3C89F
-:10708000020000568B76048A445A988946FE9CFA80
-:107090008A46FEBAFE00EEBA0200ECA80274069D13
-:1070A000E8919EEBE9BA00008A4606EE9DEB005E91
-:1070B000C9C3C8040000568B76048A445A9889468E
-:1070C000FEE8E6A18946FCE8E0A12B46FC3DB80BB2
-:1070D0007605B80100EB239CFA8A46FEBAFE00EE64
-:1070E000BA0200ECA80274069DE8489EEBD9BA00EB
-:1070F000008A4606EE9D33C0EB005EC9C3C804009B
-:107100000056578B7604837E0600740756E8030109
-:1071100059EB0556E8A200598846FF807EFF0877A4
-:10712000068A46FFE98400807EFF0F7603EB7990A4
-:107130008A46FFB4002D0A008BD883FB047767D101
-:10714000E32EFFA7AF71B000EB6156E86B0059B4B6
-:1071500000250F008946FC56E85E0059B4008BF804
-:1071600056E8550059B400C1E0088BD703D08BFA1C
-:107170008B5EFCD1E3897830EB2E56E83B005988D2
-:10718000445BEB2456E831005988445056E8290006
-:107190005988445156E821005988445256E819004C
-:1071A00059884453EB02EB00E95BFF5F5EC9C346BD
-:1071B00071A6714A717A718471C8040000568B7689
-:1071C000048A445A988946FE9CFA8A46FEBAFE0012
-:1071D000EEBA0200ECA80175069DE8579DEBE9BAEE
-:1071E0000000EC8846FD9D8A46FDEB005EC9C3C8E1
-:1071F000020000568B76048A445A988946FE9CFA0F
-:107200008A46FEBAFE00EEBA0200EC32E424019D8A
-:107210005EC9C3C8060000568B76048A445A988912
-:1072200046FEE885A08946FAE87FA02B46FA3DB8DD
-:107230000B7604B008EB249CFA8A46FEBAFE00EEF8
-:10724000BA0200ECA80175069DE8E89CEBDABA00EA
-:1072500000EC8846FD9D8A46FDEB005EC9C3558B58
-:10726000EC568B56048A4606EE33F6EB035058462E
-:1072700083FE147CF85E5DC3C8020000568B560482
-:10728000EC8846FF33F6EB0350584683FE147CF837
-:107290008A46FFEB005EC9C3C802000056578B76D2
-:1072A00004833EB00B00751FBA8801B000EEBA86A9
-:1072B00001B000EE6A096A00683001E87D0183C40C
-:1072C00006C706B00B01006A098BC605800150E8AD
-:1072D000DA0059598BF88BC7C1E80C250F00894695
-:1072E000FE8BC7C1E808250F008B56FE83F20C3BCE
-:1072F000C275218BC7C1E804250F008B56FE83F2AF
-:10730000063BC2750F8BC7250F008B56FE83F20913
-:107310003BC2740D6A0756E838005959C746FE0744
-:10732000008A46FE0480A233028BC6BA6200F7EAE6
-:107330008A56FE8BD888976C006832028BC6BA6278
-:1073400000F7EA05140050E80EFD5959EB005F5EA6
-:10735000C9C3C8020000568B760683E60F8BC6C1F0
-:10736000E00C8BD683F20CC1E2080BC28BD683F201
-:1073700006C1E2040BC28BD683F2090BC28946FE1A
-:107380006A196A108B46049905400183D200525055
-:10739000E86B0183C4060B46FE83CA005250E89A8C
-:1073A0000083C406E82501EB005EC9C3558BEC568B
-:1073B0005733FF6A01688601E8A3FE5959B1102AC4
-:1073C0004E06D3660433F6EB2E817E0400807204F1
-:1073D000B001EB02B00050688801E881FE59596A9B
-:1073E00003688601E877FE59596A01688601E86DED
-:1073F000FE5959D16604463B76067CCD33F6EB2424
-:10740000D1E76A03688601E854FE59596A01688623
-:1074100001E84AFE5959688801E85CFE599825013F
-:10742000000BF84683FE107CD76A00688601E82DC1
-:10743000FE59598BC7EB005F5E5DC3558BEC565709
-:107440008B7E086A01688601E813FE5959B820004E
-:107450002BC750FF7606FF7604E8A20083C4068996
-:10746000560689460433F6EB47817E060080720C8F
-:107470007506837E04007204B001EB02B000506810
-:107480008801E8D9FD59596A03688601E8CFFD599A
-:10749000596A01688601E8C5FD59596A01FF7606F7
-:1074A000FF7604E8580083C40689560689460446D8
-:1074B0003BF77CB56A00688601E8A2FD59596A006D
-:1074C000688601E898FD59595F5E5DC3558BEC569F
-:1074D0006A01688601E886FD595933F6EB00688831
-:1074E00001E894FD59A80175088BC6463D64007CEF
-:1074F000ED6A00688601E865FD59595E5DC3C80400
-:1075000000008B46048B56068B4E08E306D1E0D173
-:10751000D2E2FA8946FC8956FE8B56FE8B46FCEB7E
-:1075200000C9C300000000000000000000000000CF
-:1075300050726576696F7573204D656E7500426592
-:1075400067696E00000000000000000000000000FD
-:10755000000000000000000000000000000000002B
-:10756000000000000000000000000000000000001B
-:10757000000000000000000000000000000000000B
-:1075800000000000000000000000000000000000FB
-:1075900000000000000000000000000000000000EB
-:1075A00000000000000000000000000000000000DB
-:1075B00000000000000000000000000000000000CB
-:1075C00000000000000000000000000000000000BB
-:1075D00000000000000000000000000000000000AB
-:1075E000000000000000000000000000000000009B
-:1075F000000000000000000000000000000000008B
-:10760000000000000000000000000000000000007A
-:10761000000000000000000000000000000000006A
-:10762000000000000000000000000000000000005A
-:10763000000000000000000000000000000000004A
-:10764000000000000000000000000000000000003A
-:10765000000000000000000000000000000000002A
-:10766000000000000000000000000000000000001A
-:10767000000000000000000000000000000000000A
-:1076800000000000000000000000000000000000FA
-:1076900000000000000000000000000000000000EA
-:1076A00000000000000000000000000000000000DA
-:1076B00000000000000000000000000000000000CA
-:1076C000000000000000000000000000506F727415
-:1076D000203000506F7274203100506F727420326D
-:1076E00000506F7274203300506F72742034005059
-:1076F0006F7274203500506F7274203600506F72B4
-:1077000074203700506F7274203800506F727420EC
-:107710003900506F727420313000506F7274203114
-:107720003100506F727420313200506F727420310A
-:107730003300506F727420313400506F72742031F6
-:1077400035009C01A301AA01B101B801BF01C60126
-:10775000CD01D401DB01E201EA01F201FA010202EA
-:107760000A02080000078100038080809F919591A4
-:107770009F000381848E95848484840003828484A2
-:107780008484958E8400048800B20BC60BDA0BEE5D
-:107790000B020C160C2A0C3E0C520C770C9C0CBEE7
-:1077A0000CE00C020D01802054657374205061734D
-:1077B000736564201F20507265737320800200017E
-:1077C00080204D697373696E67205278204461741C
-:1077D000611F205072657373208002000180204277
-:1077E00061642052782044617461201F20507265CA
-:1077F000737320800200018020586D7472204275DE
-:1078000073791F20507265737320800200018020FD
-:107810006E6F742063757272656E746C791F2020B0
-:10782000696D706C656D656E7465640200240D2F62
-:107830000D3A0D450D500D5B0D660D710D7C0D87DC
-:107840000D920D9D0DA80DB30DBE0DC90D53802CCD
-:107850003254442053862C334454522053822C33C8
-:10786000525453201F53812C3252442053852C32C2
-:1078700043442053832C334354532053842C3344A8
-:1078800053522053872C3252492702000180202076
-:10789000444344202D2070696E2032301F275385C9
-:1078A0002E31818263908081828384858687888956
-:1078B0008A8B8C8D8E8F27020001802020445352AA
-:1078C000202D2070696E2031311F2753842E318185
-:1078D000826390808182838485868788898A8B8C65
-:1078E0008D8E8F27020001802020435453202D20AD
-:1078F00070696E20341F2753832E318182639080FC
-:107900008182838485868788898A8B8C8D8E8F2758
-:107910000200018020205249202D2070696E203203
-:10792000321F2753872E3181826390808182838426
-:1079300085868788898A8B8C8D8E8F2702000180AF
-:107940002020445452202D2070696E20362F381F7D
-:107950002753862E3181826390808182838485863D
-:107960008788898A8B8C8D8E8F270200018020204A
-:10797000525453202D2070696E20351F2753822EBC
-:107980003181826390808182838485868788898A19
-:107990008B8C8D8E8F27020001802020527844200E
-:1079A0002D2070696E20321F2753812E30534D8158
-:1079B000826390808182838485868788898A8B8C84
-:1079C0008D8E8F27020001802020547844202D20A6
-:1079D00070696E20331F2753802E30534D81826390
-:1079E00090808182838485868788898A8B8C8D8E1E
-:1079F0008F27020001802020444344202D207069FD
-:107A00006E20351F2753852E3181826390808182BD
-:107A1000838485868788898A8B8C8D8E8F27020048
-:107A200001802020445352202D2070696E20351F84
-:107A30002753842E3181826390808182838485865E
-:107A40008788898A8B8C8D8E8F2702000180202069
-:107A5000435453202D2070696E20311F2753832EED
-:107A60003181826390808182838485868788898A38
-:107A70008B8C8D8E8F270200018020205249202D73
-:107A800020286E2E632E291F2753872E3181826373
-:107A900090808182838485868788898A8B8C8D8E6D
-:107AA0008F27020001802020445452202D2070692D
-:107AB0006E20321F2753862E31818263908081820F
-:107AC000838485868788898A8B8C8D8E8F27020098
-:107AD00001802020525453202D2070696E20371FC2
-:107AE0002753822E318182639080818283848586B0
-:107AF0008788898A8B8C8D8E8F27020001802020B9
-:107B0000527844202D2070696E20361F2753812E15
-:107B100030534D81826390808182838485868788FB
-:107B2000898A8B8C8D8E8F270200018020205478CB
-:107B300044202D2070696E20331F2753802E305330
-:107B40004D81826390808182838485868788898A3B
-:107B50008B8C8D8E8F27020001802020444344208F
-:107B60002D2070696E20351F202020202753852E60
-:107B700031818263888081828384858687270200A1
-:107B800001802020445352202D2070696E20351F23
-:107B9000202020202753842E318182638880818297
-:107BA0008384858687270200018020204354532048
-:107BB0002D2070696E20311F202020202753832E16
-:107BC0003181826388808182838485868727020051
-:107BD000018020205249202D20286E2E632E291F3F
-:107BE000202020202753872E318182638880818244
-:107BF00083848586872702000180202044545220F8
-:107C00002D2070696E20321F202020202753862EC1
-:107C10003181826388808182838485868727020000
-:107C200001802020525453202D2070696E20371F70
-:107C3000202020202753822E3181826388808182F8
-:107C40008384858687270200018020205278442083
-:107C50002D2070696E20361F202020202753812E72
-:107C600030534D8182638880818283848586872713
-:107C7000020001802020547844202D2070696E205D
-:107C8000331F202020202753802E30534D818263C4
-:107C90008880818283848586872702000180202056
-:107CA000444344202D2070696E2032301F20202054
-:107CB000202753852E318182638880818283848549
-:107CC000868727020001802020445352202D2070F7
-:107CD000696E2031311F202020202753842E3181CE
-:107CE0008263888081828384858687270200018061
-:107CF0002020435453202D2070696E20341F2020F3
-:107D000020202753832E318182638880818283845F
-:107D1000858687270200018020205249202D20706F
-:107D2000696E2032321F202020202753872E318178
-:107D30008263888081828384858687270200018010
-:107D40002020445452202D2070696E20362F381F79
-:107D5000202020202753862E3181826388808182D3
-:107D60008384858687270200018020205254532077
-:107D70002D2070696E20351F202020202753822E51
-:107D8000318182638880818283848586872702008F
-:107D900001802020527844202D2070696E20321FEF
-:107DA000202020202753812E30534D8182638880EC
-:107DB0008182838485868727020001802020547871
-:107DC00044202D2070696E20331F2020202027534F
-:107DD000802E30534D8182638880818283848586A2
-:107DE0008727020068049604B6033C040E04890346
-:107DF0005C03E20360088A08BE0738080E0895078E
-:107E00006C07E6071C057405FA05C404F004CC05EC
-:107E1000A00548057806C806420728065006180738
-:107E2000F006A0060000F408F408D40D04090409C3
-:107E30000409040942000C091C09E50D020014099B
-:107E40000409F40D43001C090C09050E0004040983
-:107E50001409120E2C092C092C092C0900003C09CC
-:107E60006C091E0E740974097409740900014C0927
-:107E70002C092D0E740974097409740900025C0937
-:107E80003C093D0E740974097409740900036C09F6
-:107E90004C094D0E7409740974097409FF002C090A
-:107EA0005C09000000058409EC095E0EF409F40980
-:107EB000F409F409000694097409680EAC0AAC0AC6
-:107EC000AC0AAC0A0007A4098409720EBC0ABC0AF9
-:107ED000BC0ABC0A0008B40994097C0ED40AD40A6E
-:107EE000D40AD40A000BC409A409830EFC0AFC0AB4
-:107EF000FC0AFC0A000CD409B409900E140B140BF4
-:107F0000140B140B0002E409C409A00E2C0B2C0B5B
-:107F10002C0B2C0B0400EC09D4090E00FF00740993
-:107F2000E40900008201FC09A40AAC0E8202040AE2
-:107F3000F409AF0E82030C0AFC09B20E8204140A83
-:107F4000040AB60E82051C0A0C0ABC0E8206240A1C
-:107F5000140AC00E82072C0A1C0AC40E8208340AB6
-:107F6000240AC80E82093C0A2C0ACC0E820A440A52
-:107F7000340AD10E82104C0A3C0AD60E820B540AE7
-:107F8000440ADB0E82115C0A4C0AE00E820C640A81
-:107F9000540AE50E82126C0A5C0AEA0E820D740A1B
-:107FA000640AEF0E820E7C0A6C0AF40E820F840AB9
-:107FB000740AFB0E82138C0A7C0A020F8214940A44
-:107FC000840A090F82159C0A8C0A100F8216A40AD3
-:107FD000940A170F8217F4099C0A1E0F8202B40A32
-:107FE000B40A260F8203AC0AAC0A2D0F8200C40A21
-:107FF000CC0A340F8201CC0ABC0A3F0F8202BC0AB1
-:10800000C40A4D0F8200DC0AF40A590F8201E40A07
-:10801000D40A630F8202EC0ADC0A6E0F8203F40AB0
-:10802000E40A7A0F8204D40AEC0A870F8200040B58
-:108030000C0B930F82010C0BFC0A9B0F8202FC0AB3
-:10804000040BA70F82001C0B240BB00F8201240B22
-:10805000140BB50F8202140B1C0BBE0F4400340B23
-:10806000A40B9C0144013C0B2C0BA3014402440BC8
-:10807000340BAA0144034C0B3C0BB1014404540BD8
-:10808000440BB80144055C0B4C0BBF014406640B68
-:10809000540BC60144076C0B5C0BCD014408740BF8
-:1080A000640BD40144097C0B6C0BDB01440A840B88
-:1080B000740BE201440B8C0B7C0BEA01440C940B17
-:1080C000840BF201440D9C0B8C0BFA01440EA40BA3
-:1080D000940B0202440F2C0B9C0B0A02171F0F2F4C
-:1080E0000000018078783A20747820637073202A29
-:1080F0002A2A2A2A0200018078783A20747820639C
-:108100007073202A2A2A2A2A0200018078783A20CD
-:10811000747820637073202A2A2A2A2A0200018098
-:1081200078783A20747820637073202A2A2A2A2AC1
-:10813000020001C078783A20726320637073202AAD
-:108140002A2A2A2A020001C078783A207263206322
-:108150007073202A2A2A2A2A020001C078783A203D
-:10816000726320637073202A2A2A2A2A020001C01F
-:1081700078783A20726320637073202A2A2A2A2A88
-:1081800002000180496E7374616C6C204C6F6F70DB
-:108190006261636B1F5072657373208020746F205F
-:1081A000737461727402000180204361626C652007
-:1081B000746F2052656D6F74651F50726573732004
-:1081C0008020746F20737461727402000180204CEF
-:1081D0006F63616C204C6F6F706261636B201F2056
-:1081E0002052756E6E696E67202E2E2E0200018061
-:1081F00052656D6F7465204C6F6F706261636B20A8
-:108200001F202052756E6E696E67202E2E2E020082
-:10821000018020496E74726E6C204C6F6F706261C9
-:10822000636B1F202052756E6E696E67202E2E2E96
-:10823000020001805472616E736D69742050617424
-:108240007465726E1F202052756E6E696E67202EE7
-:108250002E2E020001802020303A2027438000018A
-:10826000802020313A202743810001802020323AAB
-:10827000202743820001802020333A2027438300B7
-:1082800001802020343A20274384000180202035BB
-:108290003A202743850001802020363A2027438654
-:1082A0000001802020373A202743870001802020CA
-:1082B000383A202743880001802020393A2027437C
-:1082C000890001802031303A2027438A0001802034
-:1082D00031313A2027438B0001802031323A202768
-:1082E000438C0001802031333A2027438D000180E8
-:1082F0002031343A2027438E0001802031353A2046
-:1083000027438F002A2A204D61696E20204D656E1B
-:1083100075202A2A004D6F6E69746F72206120509B
-:108320006F7274004D6F6E69746F722061205369B3
-:10833000676E616C00457374696D617465204350AC
-:108340005300446961676E6F7374696373004C6FA7
-:1083500063616C204C6F6F706261636B0052656D7E
-:108360006F7465204C6F6F706261636B00496E744F
-:10837000726E6C204C6F6F706261636B005472613F
-:108380006E736D6974205061747465726E00426121
-:10839000756420526174650044617461204269749F
-:1083A000730053746F702042697473005061726976
-:1083B00074790044617461205061747465726E0058
-:1083C000547820466C6F7720436F6E74726F6C0028
-:1083D000506F7274204E756D6265720035300037D3
-:1083E0003500313130003133342E35003135300035
-:1083F00032303000333030003630300031323030FF
-:10840000003138303000323030300032343030001B
-:1084100033363030003438303000373230300039C5
-:108420003630300031392C3230300033382C343093
-:10843000300035362C3030300035372C36303000B7
-:1084400036342C3030300037362C38303000313173
-:10845000352C323030003720626974730038206266
-:1084600069747300312073746F7020626974003115
-:108470002E352073746F702062697473003220731C
-:10848000746F702062697473006E6F20706172691E
-:108490007479006F64642070617269747900657624
-:1084A000656E207061726974790073706163652014
-:1084B000706172697479006D61726B2070617269AC
-:1084C000747900436F6C756D6E7300426172626502
-:1084D0007220506F6C650055555555552E2E2E0047
-:1084E0004E6F6E6500586F6E2F586F66660043546E
-:1084F00053005072657373208020666F72206D6523
-:108500006E750028636F756E74696E672E2E2E2946
-:108510000000654E64204F6620436F4465000000F4
-:10852000000000000000000000000000000000004B
-:10853000000000000000000000000000000000003B
-:10854000000000000000000000000000000000002B
-:10855000000000000000000000000000000000001B
-:10856000000000000000000000000000000000000B
-:1085700000000000000000000000000000000000FB
-:1085800000000000000000000000000000000000EB
-:1085900000000000000000000000000000000000DB
-:1085A00000000000000000000000000000000000CB
-:1085B00000000000000000000000000000000000BB
-:1085C00000000000000000000000000000000000AB
-:1085D000000000000000000000000000000000009B
-:1085E000000000000000000000000000000000008B
-:1085F000000000000000000000000000000000007B
-:00000001FF
-/*  Intelliport II loadware */
-/* -31232 bytes read from ff.lod */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index fa217607c582..c57e064666e4 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -84,7 +84,6 @@ header-y += capability.h
 header-y += capi.h
 header-y += cciss_defs.h
 header-y += cciss_ioctl.h
-header-y += cdk.h
 header-y += cdrom.h
 header-y += cgroupstats.h
 header-y += chio.h
@@ -93,7 +92,6 @@ header-y += cn_proc.h
 header-y += coda.h
 header-y += coda_psdev.h
 header-y += coff.h
-header-y += comstats.h
 header-y += connector.h
 header-y += const.h
 header-y += cramfs_fs.h
@@ -140,7 +138,6 @@ header-y += fuse.h
 header-y += futex.h
 header-y += gameport.h
 header-y += gen_stats.h
-header-y += generic_serial.h
 header-y += genetlink.h
 header-y += gfs2_ondisk.h
 header-y += gigaset_dev.h
@@ -372,6 +369,7 @@ header-y += tipc.h
 header-y += tipc_config.h
 header-y += toshiba.h
 header-y += tty.h
+header-y += tty_flags.h
 header-y += types.h
 header-y += udf_fs_i.h
 header-y += udp.h
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index d117b29d1062..f612c783170f 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -205,7 +205,6 @@ struct amba_pl011_data {
         void *dma_tx_param;
         void (*init) (void);
         void (*exit) (void);
-        void (*reset) (void);
 };
 #endif
 
diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
deleted file mode 100644
index 1dc3ab0523fd..000000000000
--- a/include/linux/cd1400.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      cd1400.h  -- cd1400 UART hardware info.
- *
- *      Copyright (C) 1996-1998  Stallion Technologies
- *      Copyright (C) 1994-1996  Greg Ungerer.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _CD1400_H
-#define _CD1400_H
-/*****************************************************************************/
-
-/*
- *      Define the number of async ports per cd1400 uart chip.
- */
-#define CD1400_PORTS            4
-
-/*
- *      Define the cd1400 uarts internal FIFO sizes.
- */
-#define CD1400_TXFIFOSIZE       12
-#define CD1400_RXFIFOSIZE       12
-
-/*
- *      Local RX FIFO thresh hold level. Also define the RTS thresh hold
- *      based on the RX thresh hold.
- */
-#define FIFO_RXTHRESHOLD        6
-#define FIFO_RTSTHRESHOLD       7
-
-/*****************************************************************************/
-
-/*
- *      Define the cd1400 register addresses. These are all the valid
- *      registers with the cd1400. Some are global, some virtual, some
- *      per port.
- */
-#define GFRCR           0x40
-#define CAR             0x68
-#define GCR             0x4b
-#define SVRR            0x67
-#define RICR            0x44
-#define TICR            0x45
-#define MICR            0x46
-#define RIR             0x6b
-#define TIR             0x6a
-#define MIR             0x69
-#define PPR             0x7e
-
-#define RIVR            0x43
-#define TIVR            0x42
-#define MIVR            0x41
-#define TDR             0x63
-#define RDSR            0x62
-#define MISR            0x4c
-#define EOSRR           0x60
-
-#define LIVR            0x18
-#define CCR             0x05
-#define SRER            0x06
-#define COR1            0x08
-#define COR2            0x09
-#define COR3            0x0a
-#define COR4            0x1e
-#define COR5            0x1f
-#define CCSR            0x0b
-#define RDCR            0x0e
-#define SCHR1           0x1a
-#define SCHR2           0x1b
-#define SCHR3           0x1c
-#define SCHR4           0x1d
-#define SCRL            0x22
-#define SCRH            0x23
-#define LNC             0x24
-#define MCOR1           0x15
-#define MCOR2           0x16
-#define RTPR            0x21
-#define MSVR1           0x6c
-#define MSVR2           0x6d
-#define PSVR            0x6f
-#define RBPR            0x78
-#define RCOR            0x7c
-#define TBPR            0x72
-#define TCOR            0x76
-
-/*****************************************************************************/
-
-/*
- *      Define the set of baud rate clock divisors.
- */
-#define CD1400_CLK0     8
-#define CD1400_CLK1     32
-#define CD1400_CLK2     128
-#define CD1400_CLK3     512
-#define CD1400_CLK4     2048
-
-#define CD1400_NUMCLKS  5
-
-/*****************************************************************************/
-
-/*
- *      Define the clock pre-scalar value to be a 5 ms clock. This should be
- *      OK for now. It would probably be better to make it 10 ms, but we
- *      can't fit that divisor into 8 bits!
- */
-#define PPR_SCALAR      244
-
-/*****************************************************************************/
-
-/*
- *      Define values used to set character size options.
- */
-#define COR1_CHL5       0x00
-#define COR1_CHL6       0x01
-#define COR1_CHL7       0x02
-#define COR1_CHL8       0x03
-
-/*
- *      Define values used to set the number of stop bits.
- */
-#define COR1_STOP1      0x00
-#define COR1_STOP15     0x04
-#define COR1_STOP2      0x08
-
-/*
- *      Define values used to set the parity scheme in use.
- */
-#define COR1_PARNONE    0x00
-#define COR1_PARFORCE   0x20
-#define COR1_PARENB     0x40
-#define COR1_PARIGNORE  0x10
-
-#define COR1_PARODD     0x80
-#define COR1_PAREVEN    0x00
-
-#define COR2_IXM        0x80
-#define COR2_TXIBE      0x40
-#define COR2_ETC        0x20
-#define COR2_LLM        0x10
-#define COR2_RLM        0x08
-#define COR2_RTSAO      0x04
-#define COR2_CTSAE      0x02
-
-#define COR3_SCDRNG     0x80
-#define COR3_SCD34      0x40
-#define COR3_FCT        0x20
-#define COR3_SCD12      0x10
-
-/*
- *      Define values used by COR4.
- */
-#define COR4_BRKINT     0x08
-#define COR4_IGNBRK     0x18
-
-/*****************************************************************************/
-
-/*
- *      Define the modem control register values.
- *      Note that the actual hardware is a little different to the conventional
- *      pin names on the cd1400.
- */
-#define MSVR1_DTR       0x01
-#define MSVR1_DSR       0x10
-#define MSVR1_RI        0x20
-#define MSVR1_CTS       0x40
-#define MSVR1_DCD       0x80
-
-#define MSVR2_RTS       0x02
-#define MSVR2_DSR       0x10
-#define MSVR2_RI        0x20
-#define MSVR2_CTS       0x40
-#define MSVR2_DCD       0x80
-
-#define MCOR1_DCD       0x80
-#define MCOR1_CTS       0x40
-#define MCOR1_RI        0x20
-#define MCOR1_DSR       0x10
-
-#define MCOR2_DCD       0x80
-#define MCOR2_CTS       0x40
-#define MCOR2_RI        0x20
-#define MCOR2_DSR       0x10
-
-/*****************************************************************************/
-
-/*
- *      Define the bits used with the service (interrupt) enable register.
- */
-#define SRER_NNDT       0x01
-#define SRER_TXEMPTY    0x02
-#define SRER_TXDATA     0x04
-#define SRER_RXDATA     0x10
-#define SRER_MODEM      0x80
-
-/*****************************************************************************/
-
-/*
- *      Define operational commands for the command register.
- */
-#define CCR_RESET       0x80
-#define CCR_CORCHANGE   0x4e
-#define CCR_SENDCH      0x20
-#define CCR_CHANCTRL    0x10
-
-#define CCR_TXENABLE    (CCR_CHANCTRL | 0x08)
-#define CCR_TXDISABLE   (CCR_CHANCTRL | 0x04)
-#define CCR_RXENABLE    (CCR_CHANCTRL | 0x02)
-#define CCR_RXDISABLE   (CCR_CHANCTRL | 0x01)
-
-#define CCR_SENDSCHR1   (CCR_SENDCH | 0x01)
-#define CCR_SENDSCHR2   (CCR_SENDCH | 0x02)
-#define CCR_SENDSCHR3   (CCR_SENDCH | 0x03)
-#define CCR_SENDSCHR4   (CCR_SENDCH | 0x04)
-
-#define CCR_RESETCHAN   (CCR_RESET | 0x00)
-#define CCR_RESETFULL   (CCR_RESET | 0x01)
-#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02)
-
-#define CCR_MAXWAIT     10000
-
-/*****************************************************************************/
-
-/*
- *      Define the valid acknowledgement types (for hw ack cycle).
- */
-#define ACK_TYPMASK     0x07
-#define ACK_TYPTX       0x02
-#define ACK_TYPMDM      0x01
-#define ACK_TYPRXGOOD   0x03
-#define ACK_TYPRXBAD    0x07
-
-#define SVRR_RX         0x01
-#define SVRR_TX         0x02
-#define SVRR_MDM        0x04
-
-#define ST_OVERRUN      0x01
-#define ST_FRAMING      0x02
-#define ST_PARITY       0x04
-#define ST_BREAK        0x08
-#define ST_SCHAR1       0x10
-#define ST_SCHAR2       0x20
-#define ST_SCHAR3       0x30
-#define ST_SCHAR4       0x40
-#define ST_RANGE        0x70
-#define ST_SCHARMASK    0x70
-#define ST_TIMEOUT      0x80
-
-#define MISR_DCD        0x80
-#define MISR_CTS        0x40
-#define MISR_RI         0x20
-#define MISR_DSR        0x10
-
-/*****************************************************************************/
-
-/*
- *      Defines for the CCSR status register.
- */
-#define CCSR_RXENABLED  0x80
-#define CCSR_RXFLOWON   0x40
-#define CCSR_RXFLOWOFF  0x20
-#define CCSR_TXENABLED  0x08
-#define CCSR_TXFLOWON   0x04
-#define CCSR_TXFLOWOFF  0x02
-
-/*****************************************************************************/
-
-/*
- *      Define the embedded commands.
- */
-#define ETC_CMD         0x00
-#define ETC_STARTBREAK  0x81
-#define ETC_DELAY       0x82
-#define ETC_STOPBREAK   0x83
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
deleted file mode 100644
index 80093a8d4f64..000000000000
--- a/include/linux/cdk.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      cdk.h  -- CDK interface definitions.
- *
- *      Copyright (C) 1996-1998  Stallion Technologies
- *      Copyright (C) 1994-1996  Greg Ungerer.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _CDK_H
-#define _CDK_H
-/*****************************************************************************/
-
-#pragma pack(2)
-
-/*
- *      The following set of definitions is used to communicate with the
- *      shared memory interface of the Stallion intelligent multiport serial
- *      boards. The definitions in this file are taken directly from the
- *      document titled "Generic Stackable Interface, Downloader and
- *      Communications Development Kit".
- */
-
-/*
- *      Define the set of important shared memory addresses. These are
- *      required to initialize the board and get things started. All of these
- *      addresses are relative to the start of the shared memory.
- */
-#define CDK_SIGADDR     0x200
-#define CDK_FEATADDR    0x280
-#define CDK_CDKADDR     0x300
-#define CDK_RDYADDR     0x262
-
-#define CDK_ALIVEMARKER 13
-
-/*
- *      On hardware power up the ROMs located on the EasyConnection 8/64 will
- *      fill out the following signature information into shared memory. This
- *      way the host system can quickly determine that the board is present
- *      and is operational.
- */
-typedef struct cdkecpsig {
-        unsigned long   magic;
-        unsigned short  romver;
-        unsigned short  cputype;
-        unsigned char   panelid[8];
-} cdkecpsig_t;
-
-#define ECP_MAGIC       0x21504345
-
-/*
- *      On hardware power up the ROMs located on the ONboard, Stallion and
- *      Brumbys will fill out the following signature information into shared
- *      memory. This way the host system can quickly determine that the board
- *      is present and is operational.
- */
-typedef struct cdkonbsig {
-        unsigned short  magic0;
-        unsigned short  magic1;
-        unsigned short  magic2;
-        unsigned short  magic3;
-        unsigned short  romver;
-        unsigned short  memoff;
-        unsigned short  memseg;
-        unsigned short  amask0;
-        unsigned short  pic;
-        unsigned short  status;
-        unsigned short  btype;
-        unsigned short  clkticks;
-        unsigned short  clkspeed;
-        unsigned short  amask1;
-        unsigned short  amask2;
-} cdkonbsig_t;
-
-#define ONB_MAGIC0      0xf2a7
-#define ONB_MAGIC1      0xa149
-#define ONB_MAGIC2      0x6352
-#define ONB_MAGIC3      0xf121
-
-/*
- *      Define the feature area structure. The feature area is the set of
- *      startup parameters used by the slave image when it starts executing.
- *      They allow for the specification of buffer sizes, debug trace, etc.
- */
-typedef struct cdkfeature {
-        unsigned long   debug;
-        unsigned long   banner;
-        unsigned long   etype;
-        unsigned long   nrdevs;
-        unsigned long   brdspec;
-        unsigned long   txrqsize;
-        unsigned long   rxrqsize;
-        unsigned long   flags;
-} cdkfeature_t;
-
-#define ETYP_DDK        0
-#define ETYP_CDK        1
-
-/*
- *      Define the CDK header structure. This is the info that the slave
- *      environment sets up after it has been downloaded and started. It
- *      essentially provides a memory map for the shared memory interface.
- */
-typedef struct cdkhdr {
-        unsigned short  command;
-        unsigned short  status;
-        unsigned short  port;
-        unsigned short  mode;
-        unsigned long   cmd_buf[14];
-        unsigned short  alive_cnt;
-        unsigned short  intrpt_mode;
-        unsigned char   intrpt_id[8];
-        unsigned char   ver_release;
-        unsigned char   ver_modification;
-        unsigned char   ver_fix;
-        unsigned char   deadman_restart;
-        unsigned short  deadman;
-        unsigned short  nrdevs;
-        unsigned long   memp;
-        unsigned long   hostp;
-        unsigned long   slavep;
-        unsigned char   hostreq;
-        unsigned char   slavereq;
-        unsigned char   cmd_reserved[30];
-} cdkhdr_t;
-
-#define MODE_DDK        0
-#define MODE_CDK        1
-
-#define IMD_INTR        0x0
-#define IMD_PPINTR      0x1
-#define IMD_POLL        0xff
-
-/*
- *      Define the memory mapping structure. This structure is pointed to by
- *      the memp field in the stlcdkhdr struct. As many as these structures
- *      as required are laid out in shared memory to define how the rest of
- *      shared memory is divided up. There will be one for each port.
- */
-typedef struct cdkmem {
-        unsigned short  dtype;
-        unsigned long   offset;
-} cdkmem_t;
-
-#define TYP_UNDEFINED   0x0
-#define TYP_ASYNCTRL    0x1
-#define TYP_ASYNC       0x20
-#define TYP_PARALLEL    0x40
-#define TYP_SYNCX21     0x60
-
-/*****************************************************************************/
-
-/*
- *      Following is a set of defines and structures used to actually deal
- *      with the serial ports on the board. Firstly is the set of commands
- *      that can be applied to ports.
- */
-#define ASYCMD          (((unsigned long) 'a') << 8)
-
-#define A_NULL          (ASYCMD | 0)
-#define A_FLUSH         (ASYCMD | 1)
-#define A_BREAK         (ASYCMD | 2)
-#define A_GETPORT       (ASYCMD | 3)
-#define A_SETPORT       (ASYCMD | 4)
-#define A_SETPORTF      (ASYCMD | 5)
-#define A_SETPORTFTX    (ASYCMD | 6)
-#define A_SETPORTFRX    (ASYCMD | 7)
-#define A_GETSIGNALS    (ASYCMD | 8)
-#define A_SETSIGNALS    (ASYCMD | 9)
-#define A_SETSIGNALSF   (ASYCMD | 10)
-#define A_SETSIGNALSFTX (ASYCMD | 11)
-#define A_SETSIGNALSFRX (ASYCMD | 12)
-#define A_GETNOTIFY     (ASYCMD | 13)
-#define A_SETNOTIFY     (ASYCMD | 14)
-#define A_NOTIFY        (ASYCMD | 15)
-#define A_PORTCTRL      (ASYCMD | 16)
-#define A_GETSTATS      (ASYCMD | 17)
-#define A_RQSTATE       (ASYCMD | 18)
-#define A_FLOWSTATE     (ASYCMD | 19)
-#define A_CLEARSTATS    (ASYCMD | 20)
-
-/*
- *      Define those arguments used for simple commands.
- */
-#define FLUSHRX         0x1
-#define FLUSHTX         0x2
-
-#define BREAKON         -1
-#define BREAKOFF        -2
-
-/*
- *      Define the port setting structure, and all those defines that go along
- *      with it. Basically this structure defines the characteristics of this
- *      port: baud rate, chars, parity, input/output char cooking etc.
- */
-typedef struct asyport {
-        unsigned long   baudout;
-        unsigned long   baudin;
-        unsigned long   iflag;
-        unsigned long   oflag;
-        unsigned long   lflag;
-        unsigned long   pflag;
-        unsigned long   flow;
-        unsigned long   spare1;
-        unsigned short  vtime;
-        unsigned short  vmin;
-        unsigned short  txlo;
-        unsigned short  txhi;
-        unsigned short  rxlo;
-        unsigned short  rxhi;
-        unsigned short  rxhog;
-        unsigned short  spare2;
-        unsigned char   csize;
-        unsigned char   stopbs;
-        unsigned char   parity;
-        unsigned char   stopin;
-        unsigned char   startin;
-        unsigned char   stopout;
-        unsigned char   startout;
-        unsigned char   parmark;
-        unsigned char   brkmark;
-        unsigned char   cc[11];
-} asyport_t;
-
-#define PT_STOP1        0x0
-#define PT_STOP15       0x1
-#define PT_STOP2        0x2
-
-#define PT_NOPARITY     0x0
-#define PT_ODDPARITY    0x1
-#define PT_EVENPARITY   0x2
-#define PT_MARKPARITY   0x3
-#define PT_SPACEPARITY  0x4
-
-#define F_NONE          0x0
-#define F_IXON          0x1
-#define F_IXOFF         0x2
-#define F_IXANY         0x4
-#define F_IOXANY        0x8
-#define F_RTSFLOW       0x10
-#define F_CTSFLOW       0x20
-#define F_DTRFLOW       0x40
-#define F_DCDFLOW       0x80
-#define F_DSROFLOW      0x100
-#define F_DSRIFLOW      0x200
-
-#define FI_NORX         0x1
-#define FI_RAW          0x2
-#define FI_ISTRIP       0x4
-#define FI_UCLC         0x8
-#define FI_INLCR        0x10
-#define FI_ICRNL        0x20
-#define FI_IGNCR        0x40
-#define FI_IGNBREAK     0x80
-#define FI_DSCRDBREAK   0x100
-#define FI_1MARKBREAK   0x200
-#define FI_2MARKBREAK   0x400
-#define FI_XCHNGBREAK   0x800
-#define FI_IGNRXERRS    0x1000
-#define FI_DSCDRXERRS   0x2000
-#define FI_1MARKRXERRS  0x4000
-#define FI_2MARKRXERRS  0x8000
-#define FI_XCHNGRXERRS  0x10000
-#define FI_DSCRDNULL    0x20000
-
-#define FO_OLCUC        0x1
-#define FO_ONLCR        0x2
-#define FO_OOCRNL       0x4
-#define FO_ONOCR        0x8
-#define FO_ONLRET       0x10
-#define FO_ONL          0x20
-#define FO_OBS          0x40
-#define FO_OVT          0x80
-#define FO_OFF          0x100
-#define FO_OTAB1        0x200
-#define FO_OTAB2        0x400
-#define FO_OTAB3        0x800
-#define FO_OCR1         0x1000
-#define FO_OCR2         0x2000
-#define FO_OCR3         0x4000
-#define FO_OFILL        0x8000
-#define FO_ODELL        0x10000
-
-#define P_RTSLOCK       0x1
-#define P_CTSLOCK       0x2
-#define P_MAPRTS        0x4
-#define P_MAPCTS        0x8
-#define P_LOOPBACK      0x10
-#define P_DTRFOLLOW     0x20
-#define P_FAKEDCD       0x40
-
-#define P_RXIMIN        0x10000
-#define P_RXITIME       0x20000
-#define P_RXTHOLD       0x40000
-
-/*
- *      Define a structure to communicate serial port signal and data state
- *      information.
- */
-typedef struct asysigs {
-        unsigned long   data;
-        unsigned long   signal;
-        unsigned long   sigvalue;
-} asysigs_t;
-
-#define DT_TXBUSY       0x1
-#define DT_TXEMPTY      0x2
-#define DT_TXLOW        0x4
-#define DT_TXHIGH       0x8
-#define DT_TXFULL       0x10
-#define DT_TXHOG        0x20
-#define DT_TXFLOWED     0x40
-#define DT_TXBREAK      0x80
-
-#define DT_RXBUSY       0x100
-#define DT_RXEMPTY      0x200
-#define DT_RXLOW        0x400
-#define DT_RXHIGH       0x800
-#define DT_RXFULL       0x1000
-#define DT_RXHOG        0x2000
-#define DT_RXFLOWED     0x4000
-#define DT_RXBREAK      0x8000
-
-#define SG_DTR          0x1
-#define SG_DCD          0x2
-#define SG_RTS          0x4
-#define SG_CTS          0x8
-#define SG_DSR          0x10
-#define SG_RI           0x20
-
-/*
- *      Define the notification setting structure. This is used to tell the
- *      port what events we want to be informed about. Fields here use the
- *      same defines as for the asysigs structure above.
- */
-typedef struct asynotify {
-        unsigned long   ctrl;
-        unsigned long   data;
-        unsigned long   signal;
-        unsigned long   sigvalue;
-} asynotify_t;
-
-/*
- *      Define the port control structure. It is used to do fine grain
- *      control operations on the port.
- */
-typedef struct {
-        unsigned long   rxctrl;
-        unsigned long   txctrl;
-        char            rximdch;
-        char            tximdch;
-        char            spare1;
-        char            spare2;
-} asyctrl_t;
-
-#define CT_ENABLE       0x1
-#define CT_DISABLE      0x2
-#define CT_STOP         0x4
-#define CT_START        0x8
-#define CT_STARTFLOW    0x10
-#define CT_STOPFLOW     0x20
-#define CT_SENDCHR      0x40
-
-/*
- *      Define the stats structure kept for each port. This is a useful set
- *      of data collected for each port on the slave. The A_GETSTATS command
- *      is used to retrieve this data from the slave.
- */
-typedef struct asystats {
-        unsigned long   opens;
-        unsigned long   txchars;
-        unsigned long   rxchars;
-        unsigned long   txringq;
-        unsigned long   rxringq;
-        unsigned long   txmsgs;
-        unsigned long   rxmsgs;
-        unsigned long   txflushes;
-        unsigned long   rxflushes;
-        unsigned long   overruns;
-        unsigned long   framing;
-        unsigned long   parity;
-        unsigned long   ringover;
-        unsigned long   lost;
-        unsigned long   rxstart;
-        unsigned long   rxstop;
-        unsigned long   txstart;
-        unsigned long   txstop;
-        unsigned long   dcdcnt;
-        unsigned long   dtrcnt;
-        unsigned long   ctscnt;
-        unsigned long   rtscnt;
-        unsigned long   dsrcnt;
-        unsigned long   ricnt;
-        unsigned long   txbreaks;
-        unsigned long   rxbreaks;
-        unsigned long   signals;
-        unsigned long   state;
-        unsigned long   hwid;
-} asystats_t;
-
-/*****************************************************************************/
-
-/*
- *      All command and control communication with a device on the slave is
- *      via a control block in shared memory. Each device has its own control
- *      block, defined by the following structure. The control block allows
- *      the host to open, close and control the device on the slave.
- */
-typedef struct cdkctrl {
-        unsigned char   open;
-        unsigned char   close;
-        unsigned long   openarg;
-        unsigned long   closearg;
-        unsigned long   cmd;
-        unsigned long   status;
-        unsigned long   args[32];
-} cdkctrl_t;
-
-/*
- *      Each device on the slave passes data to and from the host via a ring
- *      queue in shared memory. Define a ring queue structure to hold the
- *      vital information about each ring queue. Two ring queues will be
- *      allocated for each port, one for receive data and one for transmit
- *      data.
- */
-typedef struct cdkasyrq {
-        unsigned long   offset;
-        unsigned short  size;
-        unsigned short  head;
-        unsigned short  tail;
-} cdkasyrq_t;
-
-/*
- *      Each asynchronous port is defined in shared memory by the following
- *      structure. It contains a control block to command a device, and also
- *      the necessary data channel information as well.
- */
-typedef struct cdkasy {
-        cdkctrl_t       ctrl;
-        unsigned short  notify;
-        asynotify_t     changed;
-        unsigned short  receive;
-        cdkasyrq_t      rxq;
-        unsigned short  transmit;
-        cdkasyrq_t      txq;
-} cdkasy_t;
-
-#pragma pack()
-
-/*****************************************************************************/
-
-/*
- *      Define the set of ioctls used by the driver to do special things
- *      to the board. These include interrupting it, and initializing
- *      the driver after board startup and shutdown.
- */
-#include <linux/ioctl.h>
-
-#define STL_BINTR       _IO('s',20)
-#define STL_BSTART      _IO('s',21)
-#define STL_BSTOP       _IO('s',22)
-#define STL_BRESET      _IO('s',23)
-
-/*
- *      Define a set of ioctl extensions, used to get at special stuff.
- */
-#define STL_GETPFLAG    _IO('s',80)
-#define STL_SETPFLAG    _IO('s',81)
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/comstats.h b/include/linux/comstats.h
deleted file mode 100644
index 3f5ea8e8026d..000000000000
--- a/include/linux/comstats.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      comstats.h  -- Serial Port Stats.
- *
- *      Copyright (C) 1996-1998  Stallion Technologies
- *      Copyright (C) 1994-1996  Greg Ungerer.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _COMSTATS_H
-#define _COMSTATS_H
-/*****************************************************************************/
-
-/*
- *      Serial port stats structure. The structure itself is UART
- *      independent, but some fields may be UART/driver specific (for
- *      example state).
- */
-
-typedef struct {
-        unsigned long   brd;
-        unsigned long   panel;
-        unsigned long   port;
-        unsigned long   hwid;
-        unsigned long   type;
-        unsigned long   txtotal;
-        unsigned long   rxtotal;
-        unsigned long   txbuffered;
-        unsigned long   rxbuffered;
-        unsigned long   rxoverrun;
-        unsigned long   rxparity;
-        unsigned long   rxframing;
-        unsigned long   rxlost;
-        unsigned long   txbreaks;
-        unsigned long   rxbreaks;
-        unsigned long   txxon;
-        unsigned long   txxoff;
-        unsigned long   rxxon;
-        unsigned long   rxxoff;
-        unsigned long   txctson;
-        unsigned long   txctsoff;
-        unsigned long   rxrtson;
-        unsigned long   rxrtsoff;
-        unsigned long   modem;
-        unsigned long   state;
-        unsigned long   flags;
-        unsigned long   ttystate;
-        unsigned long   cflags;
-        unsigned long   iflags;
-        unsigned long   oflags;
-        unsigned long   lflags;
-        unsigned long   signals;
-} comstats_t;
-
-
-/*
- *      Board stats structure. Returns useful info about the board.
- */
-
-#define COM_MAXPANELS   8
-
-typedef struct {
-        unsigned long   panel;
-        unsigned long   type;
-        unsigned long   hwid;
-        unsigned long   nrports;
-} companel_t;
-
-typedef struct {
-        unsigned long   brd;
-        unsigned long   type;
-        unsigned long   hwid;
-        unsigned long   state;
-        unsigned long   ioaddr;
-        unsigned long   ioaddr2;
-        unsigned long   memaddr;
-        unsigned long   irq;
-        unsigned long   nrpanels;
-        unsigned long   nrports;
-        companel_t      panels[COM_MAXPANELS];
-} combrd_t;
-
-
-/*
- *      Define the ioctl operations for stats stuff.
- */
-#include <linux/ioctl.h>
-
-#define COM_GETPORTSTATS        _IO('c',30)
-#define COM_CLRPORTSTATS        _IO('c',31)
-#define COM_GETBRDSTATS         _IO('c',32)
-
-
-/*
- *      Define the set of ioctls that give user level access to the
- *      private port, panel and board structures. The argument required
- *      will be driver dependent!  
- */
-#define COM_READPORT            _IO('c',40)
-#define COM_READBOARD           _IO('c',41)
-#define COM_READPANEL           _IO('c',42)
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
deleted file mode 100644
index 79b3eb37243a..000000000000
--- a/include/linux/generic_serial.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  generic_serial.h
- *
- *  Copyright (C) 1998 R.E.Wolff@BitWizard.nl
- *
- *  written for the SX serial driver.
- *
- *  Version 0.1 -- December, 1998.
- */
-
-#ifndef GENERIC_SERIAL_H
-#define GENERIC_SERIAL_H
-
-#warning Use of this header is deprecated.
-#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless.
-
-/* Flags */
-/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
-   used in serial.c, but they are also used in all other serial drivers. 
-   Make sure they don't clash with these here... */
-#define GS_TX_INTEN      0x00800000
-#define GS_RX_INTEN      0x00400000
-#define GS_ACTIVE        0x00200000
-
-#define GS_TYPE_NORMAL   1
-
-#define GS_DEBUG_FLUSH   0x00000001
-#define GS_DEBUG_BTR     0x00000002
-#define GS_DEBUG_TERMIOS 0x00000004
-#define GS_DEBUG_STUFF   0x00000008
-#define GS_DEBUG_CLOSE   0x00000010
-#define GS_DEBUG_FLOW    0x00000020
-#define GS_DEBUG_WRITE   0x00000040
-
-#endif
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
deleted file mode 100644
index ad700a60c158..000000000000
--- a/include/linux/istallion.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      istallion.h  -- stallion intelligent multiport serial driver.
- *
- *      Copyright (C) 1996-1998  Stallion Technologies
- *      Copyright (C) 1994-1996  Greg Ungerer.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _ISTALLION_H
-#define _ISTALLION_H
-/*****************************************************************************/
-
-/*
- *      Define important driver constants here.
- */
-#define STL_MAXBRDS             4
-#define STL_MAXPANELS           4
-#define STL_MAXPORTS            64
-#define STL_MAXCHANS            (STL_MAXPORTS + 1)
-#define STL_MAXDEVS             (STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- *      Define a set of structures to hold all the board/panel/port info
- *      for our ports. These will be dynamically allocated as required at
- *      driver initialization time.
- */
-
-/*
- *      Port and board structures to hold status info about each object.
- *      The board structure contains pointers to structures for each port
- *      connected to it. Panels are not distinguished here, since
- *      communication with the slave board will always be on a per port
- *      basis.
- */
-struct stliport {
-        unsigned long           magic;
-        struct tty_port         port;
-        unsigned int            portnr;
-        unsigned int            panelnr;
-        unsigned int            brdnr;
-        unsigned long           state;
-        unsigned int            devnr;
-        int                     baud_base;
-        int                     custom_divisor;
-        int                     closing_wait;
-        int                     rc;
-        int                     argsize;
-        void                    *argp;
-        unsigned int            rxmarkmsk;
-        wait_queue_head_t       raw_wait;
-        struct asysigs          asig;
-        unsigned long           addr;
-        unsigned long           rxoffset;
-        unsigned long           txoffset;
-        unsigned long           sigs;
-        unsigned long           pflag;
-        unsigned int            rxsize;
-        unsigned int            txsize;
-        unsigned char           reqbit;
-        unsigned char           portidx;
-        unsigned char           portbit;
-};
-
-/*
- *      Use a structure of function pointers to do board level operations.
- *      These include, enable/disable, paging shared memory, interrupting, etc.
- */
-struct stlibrd {
-        unsigned long   magic;
-        unsigned int    brdnr;
-        unsigned int    brdtype;
-        unsigned long   state;
-        unsigned int    nrpanels;
-        unsigned int    nrports;
-        unsigned int    nrdevs;
-        unsigned int    iobase;
-        int             iosize;
-        unsigned long   memaddr;
-        void            __iomem *membase;
-        unsigned long   memsize;
-        int             pagesize;
-        int             hostoffset;
-        int             slaveoffset;
-        int             bitsize;
-        int             enabval;
-        unsigned int    panels[STL_MAXPANELS];
-        int             panelids[STL_MAXPANELS];
-        void            (*init)(struct stlibrd *brdp);
-        void            (*enable)(struct stlibrd *brdp);
-        void            (*reenable)(struct stlibrd *brdp);
-        void            (*disable)(struct stlibrd *brdp);
-        void            __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
-        void            (*intr)(struct stlibrd *brdp);
-        void            (*reset)(struct stlibrd *brdp);
-        struct stliport *ports[STL_MAXPORTS];
-};
-
-
-/*
- *      Define MAGIC numbers used for above structures.
- */
-#define STLI_PORTMAGIC  0xe671c7a1
-#define STLI_BOARDMAGIC 0x4bc6c825
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index daf4a3a40ee0..b7c8cdc1d422 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -65,7 +65,6 @@ struct kbd_struct {
 
 extern int kbd_init(void);
 
-extern unsigned char getledstate(void);
 extern void setledstate(struct kbd_struct *kbd, unsigned int led);
 
 extern int do_poke_blanked_console;
@@ -145,16 +144,4 @@ void compute_shiftstate(void);
 
 extern unsigned int keymap_count;
 
-/* console.c */
-
-static inline void con_schedule_flip(struct tty_struct *t)
-{
-        unsigned long flags;
-        spin_lock_irqsave(&t->buf.lock, flags);
-        if (t->buf.tail != NULL)
-                t->buf.tail->commit = t->buf.tail->used;
-        spin_unlock_irqrestore(&t->buf.lock, flags);
-        schedule_work(&t->buf.work);
-}
-
 #endif
diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h
new file mode 100644
index 000000000000..91648bf5fc5c
--- /dev/null
+++ b/include/linux/platform_data/max310x.h
@@ -0,0 +1,67 @@
+/*
+ *  Maxim (Dallas) MAX3107/8 serial driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ *  Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
+ *  Based on max3110.c, by Feng Tang <feng.tang@intel.com>
+ *  Based on max3107.c, by Aavamobile
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#ifndef _MAX310X_H_
+#define _MAX310X_H_
+
+/*
+ * Example board initialization data:
+ *
+ * static struct max310x_pdata max3107_pdata = {
+ *      .driver_flags   = MAX310X_EXT_CLK,
+ *      .uart_flags[0]  = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL,
+ *      .frequency      = 3686400,
+ *      .gpio_base      = -1,
+ * };
+ *
+ * static struct spi_board_info spi_device_max3107[] = {
+ *      {
+ *              .modalias       = "max3107",
+ *              .irq            = IRQ_EINT3,
+ *              .bus_num        = 1,
+ *              .chip_select    = 1,
+ *              .platform_data  = &max3107_pdata,
+ *      },
+ * };
+ */
+
+#define MAX310X_MAX_UARTS       1
+
+/* MAX310X platform data structure */
+struct max310x_pdata {
+        /* Flags global to driver */
+        const u8                driver_flags:2;
+#define MAX310X_EXT_CLK         (0x00000001)    /* External clock enable */
+#define MAX310X_AUTOSLEEP       (0x00000002)    /* Enable AutoSleep mode */
+        /* Flags global to UART port */
+        const u8                uart_flags[MAX310X_MAX_UARTS];
+#define MAX310X_LOOPBACK        (0x00000001)    /* Loopback mode enable */
+#define MAX310X_ECHO_SUPRESS    (0x00000002)    /* Enable echo supress */
+#define MAX310X_AUTO_DIR_CTRL   (0x00000004)    /* Enable Auto direction
+                                                 * control (RS-485)
+                                                 */
+        /* Frequency (extrenal clock or crystal) */
+        const int               frequency;
+        /* GPIO base number (can be negative) */
+        const int               gpio_base;
+        /* Called during startup */
+        void (*init)(void);
+        /* Called before finish */
+        void (*exit)(void);
+        /* Suspend callback */
+        void (*suspend)(int do_suspend);
+};
+
+#endif
diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h
new file mode 100644
index 000000000000..7311ccd3217f
--- /dev/null
+++ b/include/linux/platform_data/sccnxp.h
@@ -0,0 +1,93 @@
+/*
+ *  NXP (Philips) SCC+++(SCN+++) serial driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ *  Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#ifndef __SCCNXP_H
+#define __SCCNXP_H
+
+#define SCCNXP_MAX_UARTS        2
+
+/* Output lines */
+#define LINE_OP0                1
+#define LINE_OP1                2
+#define LINE_OP2                3
+#define LINE_OP3                4
+#define LINE_OP4                5
+#define LINE_OP5                6
+#define LINE_OP6                7
+#define LINE_OP7                8
+
+/* Input lines */
+#define LINE_IP0                9
+#define LINE_IP1                10
+#define LINE_IP2                11
+#define LINE_IP3                12
+#define LINE_IP4                13
+#define LINE_IP5                14
+#define LINE_IP6                15
+
+/* Signals */
+#define DTR_OP                  0       /* DTR */
+#define RTS_OP                  4       /* RTS */
+#define DSR_IP                  8       /* DSR */
+#define CTS_IP                  12      /* CTS */
+#define DCD_IP                  16      /* DCD */
+#define RNG_IP                  20      /* RNG */
+
+#define DIR_OP                  24      /* Special signal for control RS-485.
+                                         * Goes high when transmit,
+                                         * then goes low.
+                                         */
+
+/* Routing control signal 'sig' to line 'line' */
+#define MCTRL_SIG(sig, line)    ((line) << (sig))
+
+/*
+ * Example board initialization data:
+ *
+ * static struct resource sc2892_resources[] = {
+ *      DEFINE_RES_MEM(UART_PHYS_START, 0x10),
+ *      DEFINE_RES_IRQ(IRQ_EXT2),
+ * };
+ *
+ * static struct sccnxp_pdata sc2892_info = {
+ *      .frequency      = 3686400,
+ *      .mctrl_cfg[0]   = MCTRL_SIG(DIR_OP, LINE_OP0),
+ *      .mctrl_cfg[1]   = MCTRL_SIG(DIR_OP, LINE_OP1),
+ * };
+ *
+ * static struct platform_device sc2892 = {
+ *      .name           = "sc2892",
+ *      .id             = -1,
+ *      .resource       = sc2892_resources,
+ *      .num_resources  = ARRAY_SIZE(sc2892_resources),
+ *      .dev = {
+ *              .platform_data  = &sc2892_info,
+ *      },
+ * };
+ */
+
+/* SCCNXP platform data structure */
+struct sccnxp_pdata {
+        /* Frequency (extrenal clock or crystal) */
+        int                     frequency;
+        /* Shift for A0 line */
+        const u8                reg_shift;
+        /* Modem control lines configuration */
+        const u32               mctrl_cfg[SCCNXP_MAX_UARTS];
+        /* Called during startup */
+        void (*init)(void);
+        /* Called before finish */
+        void (*exit)(void);
+};
+
+#endif
diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h
deleted file mode 100644
index 7ca35abad387..000000000000
--- a/include/linux/sc26198.h
+++ /dev/null
@@ -1,533 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      sc26198.h  -- SC26198 UART hardware info.
- *
- *      Copyright (C) 1995-1998  Stallion Technologies
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _SC26198_H
-#define _SC26198_H
-/*****************************************************************************/
-
-/*
- *      Define the number of async ports per sc26198 uart device.
- */
-#define SC26198_PORTS           8
-
-/*
- *      Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
- */
-#define SC26198_MASTERCLOCK     14745600L
-#define SC26198_DCLK            (SC26198_MASTERCLOCK)
-#define SC26198_CCLK            (SC26198_MASTERCLOCK / 2)
-#define SC26198_BCLK            (SC26198_MASTERCLOCK / 4)
-
-/*
- *      Define internal FIFO sizes for the 26198 ports.
- */
-#define SC26198_TXFIFOSIZE      16
-#define SC26198_RXFIFOSIZE      16
-
-/*****************************************************************************/
-
-/*
- *      Global register definitions. These registers are global to each 26198
- *      device, not specific ports on it.
- */
-#define TSTR            0x0d
-#define GCCR            0x0f
-#define ICR             0x1b
-#define WDTRCR          0x1d
-#define IVR             0x1f
-#define BRGTRUA         0x84
-#define GPOSR           0x87
-#define GPOC            0x8b
-#define UCIR            0x8c
-#define CIR             0x8c
-#define BRGTRUB         0x8d
-#define GRXFIFO         0x8e
-#define GTXFIFO         0x8e
-#define GCCR2           0x8f
-#define BRGTRLA         0x94
-#define GPOR            0x97
-#define GPOD            0x9b
-#define BRGTCR          0x9c
-#define GICR            0x9c
-#define BRGTRLB         0x9d
-#define GIBCR           0x9d
-#define GITR            0x9f
-
-/*
- *      Per port channel registers. These are the register offsets within
- *      the port address space, so need to have the port address (0 to 7)
- *      inserted in bit positions 4:6.
- */
-#define MR0             0x00
-#define MR1             0x01
-#define IOPCR           0x02
-#define BCRBRK          0x03
-#define BCRCOS          0x04
-#define BCRX            0x06
-#define BCRA            0x07
-#define XONCR           0x08
-#define XOFFCR          0x09
-#define ARCR            0x0a
-#define RXCSR           0x0c
-#define TXCSR           0x0e
-#define MR2             0x80
-#define SR              0x81
-#define SCCR            0x81
-#define ISR             0x82
-#define IMR             0x82
-#define TXFIFO          0x83
-#define RXFIFO          0x83
-#define IPR             0x84
-#define IOPIOR          0x85
-#define XISR            0x86
-
-/*
- *      For any given port calculate the address to use to access a specified
- *      register. This is only used for unusual access, mostly this is done
- *      through the assembler access routines.
- */
-#define SC26198_PORTREG(port,reg)       ((((port) & 0x07) << 4) | (reg))
-
-/*****************************************************************************/
-
-/*
- *      Global configuration control register bit definitions.
- */
-#define GCCR_NOACK              0x00
-#define GCCR_IVRACK             0x02
-#define GCCR_IVRCHANACK         0x04
-#define GCCR_IVRTYPCHANACK      0x06
-#define GCCR_ASYNCCYCLE         0x00
-#define GCCR_SYNCCYCLE          0x40
-
-/*****************************************************************************/
-
-/*
- *      Mode register 0 bit definitions.
- */
-#define MR0_ADDRNONE            0x00
-#define MR0_AUTOWAKE            0x01
-#define MR0_AUTODOZE            0x02
-#define MR0_AUTOWAKEDOZE        0x03
-#define MR0_SWFNONE             0x00
-#define MR0_SWFTX               0x04
-#define MR0_SWFRX               0x08
-#define MR0_SWFRXTX             0x0c
-#define MR0_TXMASK              0x30
-#define MR0_TXEMPTY             0x00
-#define MR0_TXHIGH              0x10
-#define MR0_TXHALF              0x20
-#define MR0_TXRDY               0x00
-#define MR0_ADDRNT              0x00
-#define MR0_ADDRT               0x40
-#define MR0_SWFNT               0x00
-#define MR0_SWFT                0x80
-
-/*
- *      Mode register 1 bit definitions.
- */
-#define MR1_CS5                 0x00
-#define MR1_CS6                 0x01
-#define MR1_CS7                 0x02
-#define MR1_CS8                 0x03
-#define MR1_PAREVEN             0x00
-#define MR1_PARODD              0x04
-#define MR1_PARENB              0x00
-#define MR1_PARFORCE            0x08
-#define MR1_PARNONE             0x10
-#define MR1_PARSPECIAL          0x18
-#define MR1_ERRCHAR             0x00
-#define MR1_ERRBLOCK            0x20
-#define MR1_ISRUNMASKED         0x00
-#define MR1_ISRMASKED           0x40
-#define MR1_AUTORTS             0x80
-
-/*
- *      Mode register 2 bit definitions.
- */
-#define MR2_STOP1               0x00
-#define MR2_STOP15              0x01
-#define MR2_STOP2               0x02
-#define MR2_STOP916             0x03
-#define MR2_RXFIFORDY           0x00
-#define MR2_RXFIFOHALF          0x04
-#define MR2_RXFIFOHIGH          0x08
-#define MR2_RXFIFOFULL          0x0c
-#define MR2_AUTOCTS             0x10
-#define MR2_TXRTS               0x20
-#define MR2_MODENORM            0x00
-#define MR2_MODEAUTOECHO        0x40
-#define MR2_MODELOOP            0x80
-#define MR2_MODEREMECHO         0xc0
-
-/*****************************************************************************/
-
-/*
- *      Baud Rate Generator (BRG) selector values.
- */
-#define BRG_50                  0x00
-#define BRG_75                  0x01
-#define BRG_150                 0x02
-#define BRG_200                 0x03
-#define BRG_300                 0x04
-#define BRG_450                 0x05
-#define BRG_600                 0x06
-#define BRG_900                 0x07
-#define BRG_1200                0x08
-#define BRG_1800                0x09
-#define BRG_2400                0x0a
-#define BRG_3600                0x0b
-#define BRG_4800                0x0c
-#define BRG_7200                0x0d
-#define BRG_9600                0x0e
-#define BRG_14400               0x0f
-#define BRG_19200               0x10
-#define BRG_28200               0x11
-#define BRG_38400               0x12
-#define BRG_57600               0x13
-#define BRG_115200              0x14
-#define BRG_230400              0x15
-#define BRG_GIN0                0x16
-#define BRG_GIN1                0x17
-#define BRG_CT0                 0x18
-#define BRG_CT1                 0x19
-#define BRG_RX2TX316            0x1b
-#define BRG_RX2TX31             0x1c
-
-#define SC26198_MAXBAUD         921600
-
-/*****************************************************************************/
-
-/*
- *      Command register command definitions.
- */
-#define CR_NULL                 0x04
-#define CR_ADDRNORMAL           0x0c
-#define CR_RXRESET              0x14
-#define CR_TXRESET              0x1c
-#define CR_CLEARRXERR           0x24
-#define CR_BREAKRESET           0x2c
-#define CR_TXSTARTBREAK         0x34
-#define CR_TXSTOPBREAK          0x3c
-#define CR_RTSON                0x44
-#define CR_RTSOFF               0x4c
-#define CR_ADDRINIT             0x5c
-#define CR_RXERRBLOCK           0x6c
-#define CR_TXSENDXON            0x84
-#define CR_TXSENDXOFF           0x8c
-#define CR_GANGXONSET           0x94
-#define CR_GANGXOFFSET          0x9c
-#define CR_GANGXONINIT          0xa4
-#define CR_GANGXOFFINIT         0xac
-#define CR_HOSTXON              0xb4
-#define CR_HOSTXOFF             0xbc
-#define CR_CANCELXOFF           0xc4
-#define CR_ADDRRESET            0xdc
-#define CR_RESETALLPORTS        0xf4
-#define CR_RESETALL             0xfc
-
-#define CR_RXENABLE             0x01
-#define CR_TXENABLE             0x02
-
-/*****************************************************************************/
-
-/*
- *      Channel status register.
- */
-#define SR_RXRDY                0x01
-#define SR_RXFULL               0x02
-#define SR_TXRDY                0x04
-#define SR_TXEMPTY              0x08
-#define SR_RXOVERRUN            0x10
-#define SR_RXPARITY             0x20
-#define SR_RXFRAMING            0x40
-#define SR_RXBREAK              0x80
-
-#define SR_RXERRS               (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
-
-/*****************************************************************************/
-
-/*
- *      Interrupt status register and interrupt mask register bit definitions.
- */
-#define IR_TXRDY                0x01
-#define IR_RXRDY                0x02
-#define IR_RXBREAK              0x04
-#define IR_XONXOFF              0x10
-#define IR_ADDRRECOG            0x20
-#define IR_RXWATCHDOG           0x40
-#define IR_IOPORT               0x80
-
-/*****************************************************************************/
-
-/*
- *      Interrupt vector register field definitions.
- */
-#define IVR_CHANMASK            0x07
-#define IVR_TYPEMASK            0x18
-#define IVR_CONSTMASK           0xc0
-
-#define IVR_RXDATA              0x10
-#define IVR_RXBADDATA           0x18
-#define IVR_TXDATA              0x08
-#define IVR_OTHER               0x00
-
-/*****************************************************************************/
-
-/*
- *      BRG timer control register bit definitions.
- */
-#define BRGCTCR_DISABCLK0       0x00
-#define BRGCTCR_ENABCLK0        0x08
-#define BRGCTCR_DISABCLK1       0x00
-#define BRGCTCR_ENABCLK1        0x80
-
-#define BRGCTCR_0SCLK16         0x00
-#define BRGCTCR_0SCLK32         0x01
-#define BRGCTCR_0SCLK64         0x02
-#define BRGCTCR_0SCLK128        0x03
-#define BRGCTCR_0X1             0x04
-#define BRGCTCR_0X12            0x05
-#define BRGCTCR_0IO1A           0x06
-#define BRGCTCR_0GIN0           0x07
-
-#define BRGCTCR_1SCLK16         0x00
-#define BRGCTCR_1SCLK32         0x10
-#define BRGCTCR_1SCLK64         0x20
-#define BRGCTCR_1SCLK128        0x30
-#define BRGCTCR_1X1             0x40
-#define BRGCTCR_1X12            0x50
-#define BRGCTCR_1IO1B           0x60
-#define BRGCTCR_1GIN1           0x70
-
-/*****************************************************************************/
-
-/*
- *      Watch dog timer enable register.
- */
-#define WDTRCR_ENABALL          0xff
-
-/*****************************************************************************/
-
-/*
- *      XON/XOFF interrupt status register.
- */
-#define XISR_TXCHARMASK         0x03
-#define XISR_TXCHARNORMAL       0x00
-#define XISR_TXWAIT             0x01
-#define XISR_TXXOFFPEND         0x02
-#define XISR_TXXONPEND          0x03
-
-#define XISR_TXFLOWMASK         0x0c
-#define XISR_TXNORMAL           0x00
-#define XISR_TXSTOPPEND         0x04
-#define XISR_TXSTARTED          0x08
-#define XISR_TXSTOPPED          0x0c
-
-#define XISR_RXFLOWMASK         0x30
-#define XISR_RXFLOWNONE         0x00
-#define XISR_RXXONSENT          0x10
-#define XISR_RXXOFFSENT         0x20
-
-#define XISR_RXXONGOT           0x40
-#define XISR_RXXOFFGOT          0x80
-
-/*****************************************************************************/
-
-/*
- *      Current interrupt register.
- */
-#define CIR_TYPEMASK            0xc0
-#define CIR_TYPEOTHER           0x00
-#define CIR_TYPETX              0x40
-#define CIR_TYPERXGOOD          0x80
-#define CIR_TYPERXBAD           0xc0
-
-#define CIR_RXDATA              0x80
-#define CIR_RXBADDATA           0x40
-#define CIR_TXDATA              0x40
-
-#define CIR_CHANMASK            0x07
-#define CIR_CNTMASK             0x38
-
-#define CIR_SUBTYPEMASK         0x38
-#define CIR_SUBNONE             0x00
-#define CIR_SUBCOS              0x08
-#define CIR_SUBADDR             0x10
-#define CIR_SUBXONXOFF          0x18
-#define CIR_SUBBREAK            0x28
-
-/*****************************************************************************/
-
-/*
- *      Global interrupting channel register.
- */
-#define GICR_CHANMASK           0x07
-
-/*****************************************************************************/
-
-/*
- *      Global interrupting byte count register.
- */
-#define GICR_COUNTMASK          0x0f
-
-/*****************************************************************************/
-
-/*
- *      Global interrupting type register.
- */
-#define GITR_RXMASK             0xc0
-#define GITR_RXNONE             0x00
-#define GITR_RXBADDATA          0x80
-#define GITR_RXGOODDATA         0xc0
-#define GITR_TXDATA             0x20
-
-#define GITR_SUBTYPEMASK        0x07
-#define GITR_SUBNONE            0x00
-#define GITR_SUBCOS             0x01
-#define GITR_SUBADDR            0x02
-#define GITR_SUBXONXOFF         0x03
-#define GITR_SUBBREAK           0x05
-
-/*****************************************************************************/
-
-/*
- *      Input port change register.
- */
-#define IPR_CTS                 0x01
-#define IPR_DTR                 0x02
-#define IPR_RTS                 0x04
-#define IPR_DCD                 0x08
-#define IPR_CTSCHANGE           0x10
-#define IPR_DTRCHANGE           0x20
-#define IPR_RTSCHANGE           0x40
-#define IPR_DCDCHANGE           0x80
-
-#define IPR_CHANGEMASK          0xf0
-
-/*****************************************************************************/
-
-/*
- *      IO port interrupt and output register.
- */
-#define IOPR_CTS                0x01
-#define IOPR_DTR                0x02
-#define IOPR_RTS                0x04
-#define IOPR_DCD                0x08
-#define IOPR_CTSCOS             0x10
-#define IOPR_DTRCOS             0x20
-#define IOPR_RTSCOS             0x40
-#define IOPR_DCDCOS             0x80
-
-/*****************************************************************************/
-
-/*
- *      IO port configuration register.
- */
-#define IOPCR_SETCTS            0x00
-#define IOPCR_SETDTR            0x04
-#define IOPCR_SETRTS            0x10
-#define IOPCR_SETDCD            0x00
-
-#define IOPCR_SETSIGS           (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
-
-/*****************************************************************************/
-
-/*
- *      General purpose output select register.
- */
-#define GPORS_TXC1XA            0x08
-#define GPORS_TXC16XA           0x09
-#define GPORS_RXC16XA           0x0a
-#define GPORS_TXC16XB           0x0b
-#define GPORS_GPOR3             0x0c
-#define GPORS_GPOR2             0x0d
-#define GPORS_GPOR1             0x0e
-#define GPORS_GPOR0             0x0f
-
-/*****************************************************************************/
-
-/*
- *      General purpose output register.
- */
-#define GPOR_0                  0x01
-#define GPOR_1                  0x02
-#define GPOR_2                  0x04
-#define GPOR_3                  0x08
-
-/*****************************************************************************/
-
-/*
- *      General purpose output clock register.
- */
-#define GPORC_0NONE             0x00
-#define GPORC_0GIN0             0x01
-#define GPORC_0GIN1             0x02
-#define GPORC_0IO3A             0x02
-
-#define GPORC_1NONE             0x00
-#define GPORC_1GIN0             0x04
-#define GPORC_1GIN1             0x08
-#define GPORC_1IO3C             0x0c
-
-#define GPORC_2NONE             0x00
-#define GPORC_2GIN0             0x10
-#define GPORC_2GIN1             0x20
-#define GPORC_2IO3E             0x20
-
-#define GPORC_3NONE             0x00
-#define GPORC_3GIN0             0x40
-#define GPORC_3GIN1             0x80
-#define GPORC_3IO3G             0xc0
-
-/*****************************************************************************/
-
-/*
- *      General purpose output data register.
- */
-#define GPOD_0MASK              0x03
-#define GPOD_0SET1              0x00
-#define GPOD_0SET0              0x01
-#define GPOD_0SETR0             0x02
-#define GPOD_0SETIO3B           0x03
-
-#define GPOD_1MASK              0x0c
-#define GPOD_1SET1              0x00
-#define GPOD_1SET0              0x04
-#define GPOD_1SETR0             0x08
-#define GPOD_1SETIO3D           0x0c
-
-#define GPOD_2MASK              0x30
-#define GPOD_2SET1              0x00
-#define GPOD_2SET0              0x10
-#define GPOD_2SETR0             0x20
-#define GPOD_2SETIO3F           0x30
-
-#define GPOD_3MASK              0xc0
-#define GPOD_3SET1              0x00
-#define GPOD_3SET0              0x40
-#define GPOD_3SETR0             0x80
-#define GPOD_3SETIO3H           0xc0
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 90e9f981358a..861e51de476b 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -12,9 +12,12 @@
 
 #include <linux/types.h>
 
+#include <linux/tty_flags.h>
+
 #ifdef __KERNEL__
 #include <asm/page.h>
 
+
 /*
  * Counters of the input lines (CTS, DSR, RI, CD) interrupts
  */
@@ -83,89 +86,11 @@ struct serial_struct {
 #define SERIAL_IO_HUB6  1
 #define SERIAL_IO_MEM   2
 
-struct serial_uart_config {
-        char    *name;
-        int     dfl_xmit_fifo_size;
-        int     flags;
-};
-
 #define UART_CLEAR_FIFO         0x01
 #define UART_USE_FIFO           0x02
 #define UART_STARTECH           0x04
 #define UART_NATSEMI            0x08
 
-/*
- * Definitions for async_struct (and serial_struct) flags field
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY        0 /* Notify getty on hangups and closes
-                                    * on the callout port */
-#define ASYNCB_FOURPORT          1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK               2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS     3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI            4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI           5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST         6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ          7 /* Do automatic IRQ during
-                                    * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT   8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT      9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP    10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD       11 /* Call hardpps when CD goes high  */
-#define ASYNCB_SPD_SHI          12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY      13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART       14 /* This is a buggy UART, skip some safety
-                                    * checks.  Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE        15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER        15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED      31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED        30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE    29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF    28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING          27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW         26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD         25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ        24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW        23 /* flow control for console  */
-#define ASYNCB_FIRST_KERNEL     22
-
-#define ASYNC_HUP_NOTIFY        (1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED         (1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT          (1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK               (1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS     (1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI            (1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI           (1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST         (1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ          (1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT   (1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT      (1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP     (1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD        (1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI           (1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY       (1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART        (1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE         (1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS             ((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK          (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
-                ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST          (ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP          (ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK          (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED       (1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE     (1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF     (1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING           (1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW          (1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD          (1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ         (1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW         (1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS    (~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial167.h b/include/linux/serial167.h
deleted file mode 100644
index 59c81b708562..000000000000
--- a/include/linux/serial167.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * serial167.h
- *
- * Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on cyclades.h
- */
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
-        int                     magic;
-        int                     type;
-        int                     card;
-        int                     line;
-        int                     flags;          /* defined in tty.h */
-        struct tty_struct       *tty;
-        int                     read_status_mask;
-        int                     timeout;
-        int                     xmit_fifo_size;
-        int                     cor1,cor2,cor3,cor4,cor5,cor6,cor7;
-        int                     tbpr,tco,rbpr,rco;
-        int                     ignore_status_mask;
-        int                     close_delay;
-        int                     IER;    /* Interrupt Enable Register */
-        unsigned long           last_active;
-        int                     count;  /* # of fd on device */
-        int                     x_char; /* to be pushed out ASAP */
-        int                     x_break;
-        int                     blocked_open; /* # of blocked opens */
-        unsigned char           *xmit_buf;
-        int                     xmit_head;
-        int                     xmit_tail;
-        int                     xmit_cnt;
-        int                     default_threshold;
-        int                     default_timeout;
-        wait_queue_head_t       open_wait;
-        wait_queue_head_t       close_wait;
-        struct cyclades_monitor mon;
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-
-#define CyMaxChipsPerCard 1
-
-/**** cd2401 registers ****/
-
-#define CyGFRCR         (0x81)
-#define CyCCR           (0x13)
-#define      CyCLR_CHAN         (0x40)
-#define      CyINIT_CHAN        (0x20)
-#define      CyCHIP_RESET       (0x10)
-#define      CyENB_XMTR         (0x08)
-#define      CyDIS_XMTR         (0x04)
-#define      CyENB_RCVR         (0x02)
-#define      CyDIS_RCVR         (0x01)
-#define CyCAR           (0xee)
-#define CyIER           (0x11)
-#define      CyMdmCh            (0x80)
-#define      CyRxExc            (0x20)
-#define      CyRxData           (0x08)
-#define      CyTxMpty           (0x02)
-#define      CyTxRdy            (0x01)
-#define CyLICR          (0x26)
-#define CyRISR          (0x89)
-#define      CyTIMEOUT          (0x80)
-#define      CySPECHAR          (0x70)
-#define      CyOVERRUN          (0x08)
-#define      CyPARITY           (0x04)
-#define      CyFRAME            (0x02)
-#define      CyBREAK            (0x01)
-#define CyREOIR         (0x84)
-#define CyTEOIR         (0x85)
-#define CyMEOIR         (0x86)
-#define      CyNOTRANS          (0x08)
-#define CyRFOC          (0x30)
-#define CyRDR           (0xf8)
-#define CyTDR           (0xf8)
-#define CyMISR          (0x8b)
-#define CyRISR          (0x89)
-#define CyTISR          (0x8a)
-#define CyMSVR1         (0xde)
-#define CyMSVR2         (0xdf)
-#define      CyDSR              (0x80)
-#define      CyDCD              (0x40)
-#define      CyCTS              (0x20)
-#define      CyDTR              (0x02)
-#define      CyRTS              (0x01)
-#define CyRTPRL         (0x25)
-#define CyRTPRH         (0x24)
-#define CyCOR1          (0x10)
-#define      CyPARITY_NONE      (0x00)
-#define      CyPARITY_E         (0x40)
-#define      CyPARITY_O         (0xC0)
-#define      Cy_5_BITS          (0x04)
-#define      Cy_6_BITS          (0x05)
-#define      Cy_7_BITS          (0x06)
-#define      Cy_8_BITS          (0x07)
-#define CyCOR2          (0x17)
-#define      CyETC              (0x20)
-#define      CyCtsAE            (0x02)
-#define CyCOR3          (0x16)
-#define      Cy_1_STOP          (0x02)
-#define      Cy_2_STOP          (0x04)
-#define CyCOR4          (0x15)
-#define      CyREC_FIFO         (0x0F)  /* Receive FIFO threshold */
-#define CyCOR5          (0x14)
-#define CyCOR6          (0x18)
-#define CyCOR7          (0x07)
-#define CyRBPR          (0xcb)
-#define CyRCOR          (0xc8)
-#define CyTBPR          (0xc3)
-#define CyTCOR          (0xc0)
-#define CySCHR1         (0x1f)
-#define CySCHR2         (0x1e)
-#define CyTPR           (0xda)
-#define CyPILR1         (0xe3)
-#define CyPILR2         (0xe0)
-#define CyPILR3         (0xe1)
-#define CyCMR           (0x1b)
-#define      CyASYNC            (0x02)
-#define CyLICR          (0x26)
-#define CyLIVR          (0x09)
-#define CySCRL          (0x23)
-#define CySCRH          (0x22)
-#define CyTFTC          (0x80)
-
-
-/* max number of chars in the FIFO */
-
-#define CyMAX_CHAR_FIFO 12
-
-/***************************************************************************/
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a416e92012ef..c174c90fb3fb 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -65,11 +65,38 @@ enum {
  * platform device.  Using these will make your driver
  * dependent on the 8250 driver.
  */
-struct uart_port;
-struct uart_8250_port;
+
+struct uart_8250_port {
+        struct uart_port        port;
+        struct timer_list       timer;          /* "no irq" timer */
+        struct list_head        list;           /* ports on this IRQ */
+        unsigned short          capabilities;   /* port capabilities */
+        unsigned short          bugs;           /* port bugs */
+        unsigned int            tx_loadsz;      /* transmit fifo load size */
+        unsigned char           acr;
+        unsigned char           ier;
+        unsigned char           lcr;
+        unsigned char           mcr;
+        unsigned char           mcr_mask;       /* mask of user bits */
+        unsigned char           mcr_force;      /* mask of forced bits */
+        unsigned char           cur_iotype;     /* Running I/O type */
+
+        /*
+         * Some bits in registers are cleared on a read, so they must
+         * be saved whenever the register is read but the bits will not
+         * be immediately processed.
+         */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+        unsigned char           lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+        unsigned char           msr_saved_flags;
+
+        /* 8250 specific callbacks */
+        int                     (*dl_read)(struct uart_8250_port *);
+        void                    (*dl_write)(struct uart_8250_port *, int);
+};
 
 int serial8250_register_8250_port(struct uart_8250_port *);
-int serial8250_register_port(struct uart_port *);
 void serial8250_unregister_port(int line);
 void serial8250_suspend_port(int line);
 void serial8250_resume_port(int line);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 0253c2022e53..7cf0b68bbe9e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -193,8 +193,8 @@
 /* SH-SCI */
 #define PORT_SCIFB      93
 
-/* MAX3107 */
-#define PORT_MAX3107    94
+/* MAX310X */
+#define PORT_MAX310X    94
 
 /* High Speed UART for Medfield */
 #define PORT_MFD        95
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 8ce70d76f836..5ed325e88a81 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -40,6 +40,10 @@
 
 #define UART_IIR_BUSY           0x07 /* DesignWare APB Busy Detect */
 
+#define UART_IIR_RX_TIMEOUT     0x0c /* OMAP RX Timeout interrupt */
+#define UART_IIR_XOFF           0x10 /* OMAP XOFF/Special Character */
+#define UART_IIR_CTS_RTS_DSR    0x20 /* OMAP CTS/RTS/DSR Change */
+
 #define UART_FCR        2       /* Out: FIFO Control Register */
 #define UART_FCR_ENABLE_FIFO    0x01 /* Enable the FIFO */
 #define UART_FCR_CLEAR_RCVR     0x02 /* Clear the RCVR FIFO */
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
deleted file mode 100644
index 336af33c6ea4..000000000000
--- a/include/linux/stallion.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*****************************************************************************/
-
-/*
- *      stallion.h  -- stallion multiport serial driver.
- *
- *      Copyright (C) 1996-1998  Stallion Technologies
- *      Copyright (C) 1994-1996  Greg Ungerer.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _STALLION_H
-#define _STALLION_H
-/*****************************************************************************/
-
-/*
- *      Define important driver constants here.
- */
-#define STL_MAXBRDS             4
-#define STL_MAXPANELS           4
-#define STL_MAXBANKS            8
-#define STL_PORTSPERPANEL       16
-#define STL_MAXPORTS            64
-#define STL_MAXDEVS             (STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- *      Define a set of structures to hold all the board/panel/port info
- *      for our ports. These will be dynamically allocated as required.
- */
-
-/*
- *      Define a ring queue structure for each port. This will hold the
- *      TX data waiting to be output. Characters are fed into this buffer
- *      from the line discipline (or even direct from user space!) and
- *      then fed into the UARTs during interrupts. Will use a classic ring
- *      queue here for this. The good thing about this type of ring queue
- *      is that the head and tail pointers can be updated without interrupt
- *      protection - since "write" code only needs to change the head, and
- *      interrupt code only needs to change the tail.
- */
-struct stlrq {
-        char    *buf;
-        char    *head;
-        char    *tail;
-};
-
-/*
- *      Port, panel and board structures to hold status info about each.
- *      The board structure contains pointers to structures for each panel
- *      connected to it, and in turn each panel structure contains pointers
- *      for each port structure for each port on that panel. Note that
- *      the port structure also contains the board and panel number that it
- *      is associated with, this makes it (fairly) easy to get back to the
- *      board/panel info for a port.
- */
-struct stlport {
-        unsigned long           magic;
-        struct tty_port         port;
-        unsigned int            portnr;
-        unsigned int            panelnr;
-        unsigned int            brdnr;
-        int                     ioaddr;
-        int                     uartaddr;
-        unsigned int            pagenr;
-        unsigned long           istate;
-        int                     baud_base;
-        int                     custom_divisor;
-        int                     close_delay;
-        int                     closing_wait;
-        int                     openwaitcnt;
-        int                     brklen;
-        unsigned int            sigs;
-        unsigned int            rxignoremsk;
-        unsigned int            rxmarkmsk;
-        unsigned int            imr;
-        unsigned int            crenable;
-        unsigned long           clk;
-        unsigned long           hwid;
-        void                    *uartp;
-        comstats_t              stats;
-        struct stlrq            tx;
-};
-
-struct stlpanel {
-        unsigned long   magic;
-        unsigned int    panelnr;
-        unsigned int    brdnr;
-        unsigned int    pagenr;
-        unsigned int    nrports;
-        int             iobase;
-        void            *uartp;
-        void            (*isr)(struct stlpanel *panelp, unsigned int iobase);
-        unsigned int    hwid;
-        unsigned int    ackmask;
-        struct stlport  *ports[STL_PORTSPERPANEL];
-};
-
-struct stlbrd {
-        unsigned long   magic;
-        unsigned int    brdnr;
-        unsigned int    brdtype;
-        unsigned int    state;
-        unsigned int    nrpanels;
-        unsigned int    nrports;
-        unsigned int    nrbnks;
-        int             irq;
-        int             irqtype;
-        int             (*isr)(struct stlbrd *brdp);
-        unsigned int    ioaddr1;
-        unsigned int    ioaddr2;
-        unsigned int    iosize1;
-        unsigned int    iosize2;
-        unsigned int    iostatus;
-        unsigned int    ioctrl;
-        unsigned int    ioctrlval;
-        unsigned int    hwid;
-        unsigned long   clk;
-        unsigned int    bnkpageaddr[STL_MAXBANKS];
-        unsigned int    bnkstataddr[STL_MAXBANKS];
-        struct stlpanel *bnk2panel[STL_MAXBANKS];
-        struct stlpanel *panels[STL_MAXPANELS];
-};
-
-
-/*
- *      Define MAGIC numbers used for above structures.
- */
-#define STL_PORTMAGIC   0x5a7182c9
-#define STL_PANELMAGIC  0x7ef621a1
-#define STL_BOARDMAGIC  0xa2267f52
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 9f47ab540f65..1509b86825d8 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -43,6 +43,7 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
+#include <linux/tty_flags.h>
 
 
 
@@ -103,28 +104,28 @@ struct tty_bufhead {
 #define TTY_PARITY      3
 #define TTY_OVERRUN     4
 
-#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
-#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
-#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
-#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
-#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
-#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
-#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
-#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
-#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
-#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
-#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
-#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
-#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
-#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
-#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
-#define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
-#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
-
-#define _I_FLAG(tty, f) ((tty)->termios->c_iflag & (f))
-#define _O_FLAG(tty, f) ((tty)->termios->c_oflag & (f))
-#define _C_FLAG(tty, f) ((tty)->termios->c_cflag & (f))
-#define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f))
+#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
+#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
+#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
+#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
+#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
+#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
+#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
+#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
+#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
+#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
+#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
+#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
+#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
+#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
+#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
+#define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT])
+#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
+
+#define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f))
+#define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f))
+#define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f))
+#define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f))
 
 #define I_IGNBRK(tty)   _I_FLAG((tty), IGNBRK)
 #define I_BRKINT(tty)   _I_FLAG((tty), BRKINT)
@@ -268,10 +269,11 @@ struct tty_struct {
         struct mutex ldisc_mutex;
         struct tty_ldisc *ldisc;
 
+        struct mutex legacy_mutex;
         struct mutex termios_mutex;
         spinlock_t ctrl_lock;
         /* Termios values are protected by the termios mutex */
-        struct ktermios *termios, *termios_locked;
+        struct ktermios termios, termios_locked;
         struct termiox *termiox;        /* May be NULL for unsupported */
         char name[64];
         struct pid *pgrp;               /* Protected by ctrl lock */
@@ -410,6 +412,10 @@ extern int tty_register_driver(struct tty_driver *driver);
 extern int tty_unregister_driver(struct tty_driver *driver);
 extern struct device *tty_register_device(struct tty_driver *driver,
                                           unsigned index, struct device *dev);
+extern struct device *tty_register_device_attr(struct tty_driver *driver,
+                                unsigned index, struct device *device,
+                                void *drvdata,
+                                const struct attribute_group **attr_grp);
 extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
 extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
                              int buflen);
@@ -423,7 +429,6 @@ extern void tty_unthrottle(struct tty_struct *tty);
 extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
 extern void tty_driver_remove_tty(struct tty_driver *driver,
                                   struct tty_struct *tty);
-extern void tty_shutdown(struct tty_struct *tty);
 extern void tty_free_termios(struct tty_struct *tty);
 extern int is_current_pgrp_orphaned(void);
 extern struct pid *tty_get_pgrp(struct tty_struct *tty);
@@ -497,6 +502,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
 #define tty_is_writelocked(tty)  (mutex_is_locked(&tty->atomic_write_lock))
 
 extern void tty_port_init(struct tty_port *port);
+extern void tty_port_link_device(struct tty_port *port,
+                struct tty_driver *driver, unsigned index);
+extern struct device *tty_port_register_device(struct tty_port *port,
+                struct tty_driver *driver, unsigned index,
+                struct device *device);
+extern struct device *tty_port_register_device_attr(struct tty_port *port,
+                struct tty_driver *driver, unsigned index,
+                struct device *device, void *drvdata,
+                const struct attribute_group **attr_grp);
 extern int tty_port_alloc_xmit_buf(struct tty_port *port);
 extern void tty_port_free_xmit_buf(struct tty_port *port);
 extern void tty_port_put(struct tty_port *port);
@@ -508,6 +522,12 @@ static inline struct tty_port *tty_port_get(struct tty_port *port)
         return port;
 }
 
+/* If the cts flow control is enabled, return true. */
+static inline bool tty_port_cts_enabled(struct tty_port *port)
+{
+        return port->flags & ASYNC_CTS_FLOW;
+}
+
 extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
@@ -521,6 +541,8 @@ extern int tty_port_close_start(struct tty_port *port,
 extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
 extern void tty_port_close(struct tty_port *port,
                                 struct tty_struct *tty, struct file *filp);
+extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+                                struct tty_struct *tty);
 extern int tty_port_open(struct tty_port *port,
                                 struct tty_struct *tty, struct file *filp);
 static inline int tty_port_users(struct tty_port *port)
@@ -605,8 +627,12 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
 
 /* tty_mutex.c */
 /* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(void) __acquires(tty_lock);
-extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern void __lockfunc tty_lock(struct tty_struct *tty);
+extern void __lockfunc tty_unlock(struct tty_struct *tty);
+extern void __lockfunc tty_lock_pair(struct tty_struct *tty,
+                                struct tty_struct *tty2);
+extern void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+                                struct tty_struct *tty2);
 
 /*
  * this shall be called only from where BTM is held (like close)
@@ -621,9 +647,9 @@ extern void __lockfunc tty_unlock(void) __releases(tty_lock);
 static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
                 long timeout)
 {
-        tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+        tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
         tty_wait_until_sent(tty, timeout);
-        tty_lock();
+        tty_lock(tty);
 }
 
 /*
@@ -638,16 +664,16 @@ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
  *
  * Do not use in new code.
  */
-#define wait_event_interruptible_tty(wq, condition)                     \
+#define wait_event_interruptible_tty(tty, wq, condition)                \
 ({                                                                      \
         int __ret = 0;                                                  \
         if (!(condition)) {                                             \
-                __wait_event_interruptible_tty(wq, condition, __ret);   \
+                __wait_event_interruptible_tty(tty, wq, condition, __ret);      \
         }                                                               \
         __ret;                                                          \
 })
 
-#define __wait_event_interruptible_tty(wq, condition, ret)              \
+#define __wait_event_interruptible_tty(tty, wq, condition, ret)         \
 do {                                                                    \
         DEFINE_WAIT(__wait);                                            \
                                                                         \
@@ -656,9 +682,9 @@ do {									\
                 if (condition)                                          \
                         break;                                          \
                 if (!signal_pending(current)) {                         \
-                        tty_unlock();                                   \
+                        tty_unlock(tty);                                        \
                         schedule();                                     \
-                        tty_lock();                                     \
+                        tty_lock(tty);                                  \
                         continue;                                       \
                 }                                                       \
                 ret = -ERESTARTSYS;                                     \
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 6e6dbb7447b6..dd976cfb6131 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -45,14 +45,9 @@
  *
  * void (*shutdown)(struct tty_struct * tty);
  *
- *      This routine is called synchronously when a particular tty device
- *      is closed for the last time freeing up the resources.
- *      Note that tty_shutdown() is not called if ops->shutdown is defined.
- *      This means one is responsible to take care of calling ops->remove (e.g.
- *      via tty_driver_remove_tty) and releasing tty->termios.
- *      Note that this hook may be called from *all* the contexts where one
- *      uses tty refcounting (e.g. tty_port_tty_get).
- *
+ *      This routine is called under the tty lock when a particular tty device
+ *      is closed for the last time. It executes before the tty resources
+ *      are freed so may execute while another function holds a tty kref.
  *
  * void (*cleanup)(struct tty_struct * tty);
  *
@@ -294,18 +289,18 @@ struct tty_operations {
 struct tty_driver {
         int     magic;          /* magic number for this structure */
         struct kref kref;       /* Reference management */
-        struct cdev cdev;
+        struct cdev *cdevs;
         struct module   *owner;
         const char      *driver_name;
         const char      *name;
         int     name_base;      /* offset of printed name */
         int     major;          /* major device number */
         int     minor_start;    /* start of minor device number */
-        int     num;            /* number of devices allocated */
+        unsigned int    num;    /* number of devices allocated */
         short   type;           /* type of tty driver */
         short   subtype;        /* subtype of tty driver */
         struct ktermios init_termios; /* Initial termios */
-        int     flags;          /* tty driver flags */
+        unsigned long   flags;          /* tty driver flags */
         struct proc_dir_entry *proc_entry; /* /proc fs entry */
         struct tty_driver *other; /* only used for the PTY driver */
 
@@ -313,6 +308,7 @@ struct tty_driver {
          * Pointer to the tty data structures
          */
         struct tty_struct **ttys;
+        struct tty_port **ports;
         struct ktermios **termios;
         void *driver_state;
 
@@ -326,7 +322,8 @@ struct tty_driver {
 
 extern struct list_head tty_drivers;
 
-extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner);
+extern struct tty_driver *__tty_alloc_driver(unsigned int lines,
+                struct module *owner, unsigned long flags);
 extern void put_tty_driver(struct tty_driver *driver);
 extern void tty_set_operations(struct tty_driver *driver,
                         const struct tty_operations *op);
@@ -334,7 +331,21 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
 
 extern void tty_driver_kref_put(struct tty_driver *driver);
 
-#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE)
+/* Use TTY_DRIVER_* flags below */
+#define tty_alloc_driver(lines, flags) \
+                __tty_alloc_driver(lines, THIS_MODULE, flags)
+
+/*
+ * DEPRECATED Do not use this in new code, use tty_alloc_driver instead.
+ * (And change the return value checks.)
+ */
+static inline struct tty_driver *alloc_tty_driver(unsigned int lines)
+{
+        struct tty_driver *ret = tty_alloc_driver(lines, 0);
+        if (IS_ERR(ret))
+                return NULL;
+        return ret;
+}
 
 static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
 {
@@ -380,6 +391,14 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
  *      the requested timeout to the caller instead of using a simple
  *      on/off interface.
  *
+ * TTY_DRIVER_DYNAMIC_ALLOC -- do not allocate structures which are
+ *      needed per line for this driver as it would waste memory.
+ *      The driver will take care.
+ *
+ * TTY_DRIVER_UNNUMBERED_NODE -- do not create numbered /dev nodes. In
+ *      other words create /dev/ttyprintk and not /dev/ttyprintk0.
+ *      Applicable only when a driver for a single tty device is
+ *      being allocated.
  */
 #define TTY_DRIVER_INSTALLED            0x0001
 #define TTY_DRIVER_RESET_TERMIOS        0x0002
@@ -387,6 +406,8 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
 #define TTY_DRIVER_DYNAMIC_DEV          0x0008
 #define TTY_DRIVER_DEVPTS_MEM           0x0010
 #define TTY_DRIVER_HARDWARE_BREAK       0x0020
+#define TTY_DRIVER_DYNAMIC_ALLOC        0x0040
+#define TTY_DRIVER_UNNUMBERED_NODE      0x0080
 
 /* tty driver types */
 #define TTY_DRIVER_TYPE_SYSTEM          0x0001
diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
new file mode 100644
index 000000000000..eefcb483a2c0
--- /dev/null
+++ b/include/linux/tty_flags.h
@@ -0,0 +1,78 @@
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY        0 /* Notify getty on hangups and closes
+                                    * on the callout port */
+#define ASYNCB_FOURPORT          1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK               2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS     3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI            4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI           5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST         6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ          7 /* Do automatic IRQ during
+                                    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT   8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT      9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP    10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD       11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI          12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY      13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART       14 /* This is a buggy UART, skip some safety
+                                    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE        15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER        15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED      31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED        30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE    29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF    28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING          27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW         26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD         25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ        24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW        23 /* flow control for console  */
+#define ASYNCB_FIRST_KERNEL     22
+
+#define ASYNC_HUP_NOTIFY        (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED         (1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT          (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK               (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS     (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI            (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI           (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST         (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ          (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT   (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT      (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP     (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD        (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI           (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY       (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART        (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE         (1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS             ((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK          (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+                ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST          (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP          (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK          (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED       (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE     (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF     (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING           (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW          (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD          (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ         (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW         (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS    (~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif
diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h
index 59ba38bc400f..80ffde3bb164 100644
--- a/include/net/irda/ircomm_tty.h
+++ b/include/net/irda/ircomm_tty.h
@@ -52,21 +52,16 @@
 /* Same for payload size. See qos.c for the smallest max data size */
 #define IRCOMM_TTY_DATA_UNINITIALISED   (64 - IRCOMM_TTY_HDR_UNINITIALISED)
 
-/* Those are really defined in include/linux/serial.h - Jean II */
-#define ASYNC_B_INITIALIZED     31      /* Serial port was initialized */
-#define ASYNC_B_NORMAL_ACTIVE   29      /* Normal device is active */
-#define ASYNC_B_CLOSING         27      /* Serial port is closing */
-
 /*
  * IrCOMM TTY driver state
  */
 struct ircomm_tty_cb {
         irda_queue_t queue;            /* Must be first */
+        struct tty_port port;
         magic_t magic;
 
         int state;                /* Connect state */
 
-        struct tty_struct *tty;
         struct ircomm_cb *ircomm; /* IrCOMM layer instance */
 
         struct sk_buff *tx_skb;   /* Transmit buffer */
@@ -80,7 +75,6 @@ struct ircomm_tty_cb {
         LOCAL_FLOW flow;          /* IrTTP flow status */
 
         int line;
-        unsigned long flags;
 
         __u8 dlsap_sel;
         __u8 slsap_sel;
@@ -97,19 +91,10 @@ struct ircomm_tty_cb {
         void *skey;
         void *ckey;
 
-        wait_queue_head_t open_wait;
-        wait_queue_head_t close_wait;
         struct timer_list watchdog_timer;
         struct work_struct  tqueue;
 
-        unsigned short    close_delay;
-        unsigned short    closing_wait; /* time to wait before closing */
-
-        int  open_count;
-        int  blocked_open;      /* # of blocked opens */
-
         /* Protect concurent access to :
-         *      o self->open_count
          *      o self->ctrl_skb
          *      o self->tx_skb
          * Maybe other things may gain to be protected as well...
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 56f182393c4c..ccc248791d50 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -278,8 +278,8 @@ out:
         if (err < 0)
                 goto free;
 
-        dev->tty_dev = tty_register_device(rfcomm_tty_driver, dev->id, NULL);
-
+        dev->tty_dev = tty_port_register_device(&dev->port, rfcomm_tty_driver,
+                        dev->id, NULL);
         if (IS_ERR(dev->tty_dev)) {
                 err = PTR_ERR(dev->tty_dev);
                 list_del(&dev->list);
@@ -705,9 +705,9 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp)
                         break;
                 }
 
-                tty_unlock();
+                tty_unlock(tty);
                 schedule();
-                tty_lock();
+                tty_lock(tty);
         }
         set_current_state(TASK_RUNNING);
         remove_wait_queue(&dev->wait, &wait);
@@ -861,7 +861,7 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned l
 
 static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
-        struct ktermios *new = tty->termios;
+        struct ktermios *new = &tty->termios;
         int old_baud_rate = tty_termios_baud_rate(old);
         int new_baud_rate = tty_termios_baud_rate(new);
 
diff --git a/net/irda/ircomm/ircomm_param.c b/net/irda/ircomm/ircomm_param.c
index 8b915f3ac3b9..308939128359 100644
--- a/net/irda/ircomm/ircomm_param.c
+++ b/net/irda/ircomm/ircomm_param.c
@@ -99,7 +99,6 @@ pi_param_info_t ircomm_param_info = { pi_major_call_table, 3, 0x0f, 4 };
  */
 int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush)
 {
-        struct tty_struct *tty;
         unsigned long flags;
         struct sk_buff *skb;
         int count;
@@ -109,10 +108,6 @@ int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush)
         IRDA_ASSERT(self != NULL, return -1;);
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
 
-        tty = self->tty;
-        if (!tty)
-                return 0;
-
         /* Make sure we don't send parameters for raw mode */
         if (self->service_type == IRCOMM_3_WIRE_RAW)
                 return 0;
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 6b9d5a0e42f9..95a3a7a336ba 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -52,6 +52,8 @@
 #include <net/irda/ircomm_tty_attach.h>
 #include <net/irda/ircomm_tty.h>
 
+static int ircomm_tty_install(struct tty_driver *driver,
+                struct tty_struct *tty);
 static int  ircomm_tty_open(struct tty_struct *tty, struct file *filp);
 static void ircomm_tty_close(struct tty_struct * tty, struct file *filp);
 static int  ircomm_tty_write(struct tty_struct * tty,
@@ -82,6 +84,7 @@ static struct tty_driver *driver;
 static hashbin_t *ircomm_tty = NULL;
 
 static const struct tty_operations ops = {
+        .install         = ircomm_tty_install,
         .open            = ircomm_tty_open,
         .close           = ircomm_tty_close,
         .write           = ircomm_tty_write,
@@ -104,6 +107,35 @@ static const struct tty_operations ops = {
 #endif /* CONFIG_PROC_FS */
 };
 
+static void ircomm_port_raise_dtr_rts(struct tty_port *port, int raise)
+{
+        struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+                        port);
+        /*
+         * Here, we use to lock those two guys, but as ircomm_param_request()
+         * does it itself, I don't see the point (and I see the deadlock).
+         * Jean II
+         */
+        if (raise)
+                self->settings.dte |= IRCOMM_RTS | IRCOMM_DTR;
+        else
+                self->settings.dte &= ~(IRCOMM_RTS | IRCOMM_DTR);
+
+        ircomm_param_request(self, IRCOMM_DTE, TRUE);
+}
+
+static int ircomm_port_carrier_raised(struct tty_port *port)
+{
+        struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+                        port);
+        return self->settings.dce & IRCOMM_CD;
+}
+
+static const struct tty_port_operations ircomm_port_ops = {
+        .dtr_rts = ircomm_port_raise_dtr_rts,
+        .carrier_raised = ircomm_port_carrier_raised,
+};
+
 /*
  * Function ircomm_tty_init()
  *
@@ -194,7 +226,7 @@ static int ircomm_tty_startup(struct ircomm_tty_cb *self)
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
 
         /* Check if already open */
-        if (test_and_set_bit(ASYNC_B_INITIALIZED, &self->flags)) {
+        if (test_and_set_bit(ASYNCB_INITIALIZED, &self->port.flags)) {
                 IRDA_DEBUG(2, "%s(), already open so break out!\n", __func__ );
                 return 0;
         }
@@ -231,7 +263,7 @@ static int ircomm_tty_startup(struct ircomm_tty_cb *self)
 
         return 0;
 err:
-        clear_bit(ASYNC_B_INITIALIZED, &self->flags);
+        clear_bit(ASYNCB_INITIALIZED, &self->port.flags);
         return ret;
 }
 
@@ -242,72 +274,62 @@ err:
  *
  */
 static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
-                                      struct file *filp)
+                struct tty_struct *tty, struct file *filp)
 {
+        struct tty_port *port = &self->port;
         DECLARE_WAITQUEUE(wait, current);
         int             retval;
         int             do_clocal = 0, extra_count = 0;
         unsigned long   flags;
-        struct tty_struct *tty;
 
         IRDA_DEBUG(2, "%s()\n", __func__ );
 
-        tty = self->tty;
-
         /*
          * If non-blocking mode is set, or the port is not enabled,
          * then make the check up front and then exit.
          */
         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
                 /* nonblock mode is set or port is not enabled */
-                self->flags |= ASYNC_NORMAL_ACTIVE;
+                port->flags |= ASYNC_NORMAL_ACTIVE;
                 IRDA_DEBUG(1, "%s(), O_NONBLOCK requested!\n", __func__ );
                 return 0;
         }
 
-        if (tty->termios->c_cflag & CLOCAL) {
+        if (tty->termios.c_cflag & CLOCAL) {
                 IRDA_DEBUG(1, "%s(), doing CLOCAL!\n", __func__ );
                 do_clocal = 1;
         }
 
         /* Wait for carrier detect and the line to become
          * free (i.e., not in use by the callout).  While we are in
-         * this loop, self->open_count is dropped by one, so that
+         * this loop, port->count is dropped by one, so that
          * mgsl_close() knows when to free things.  We restore it upon
          * exit, either normal or abnormal.
          */
 
         retval = 0;
-        add_wait_queue(&self->open_wait, &wait);
+        add_wait_queue(&port->open_wait, &wait);
 
         IRDA_DEBUG(2, "%s(%d):block_til_ready before block on %s open_count=%d\n",
-              __FILE__,__LINE__, tty->driver->name, self->open_count );
+              __FILE__, __LINE__, tty->driver->name, port->count);
 
-        /* As far as I can see, we protect open_count - Jean II */
-        spin_lock_irqsave(&self->spinlock, flags);
+        spin_lock_irqsave(&port->lock, flags);
         if (!tty_hung_up_p(filp)) {
                 extra_count = 1;
-                self->open_count--;
+                port->count--;
         }
-        spin_unlock_irqrestore(&self->spinlock, flags);
-        self->blocked_open++;
+        spin_unlock_irqrestore(&port->lock, flags);
+        port->blocked_open++;
 
         while (1) {
-                if (tty->termios->c_cflag & CBAUD) {
-                        /* Here, we use to lock those two guys, but
-                         * as ircomm_param_request() does it itself,
-                         * I don't see the point (and I see the deadlock).
-                         * Jean II */
-                        self->settings.dte |= IRCOMM_RTS + IRCOMM_DTR;
-
-                        ircomm_param_request(self, IRCOMM_DTE, TRUE);
-                }
+                if (tty->termios.c_cflag & CBAUD)
+                        tty_port_raise_dtr_rts(port);
 
                 current->state = TASK_INTERRUPTIBLE;
 
                 if (tty_hung_up_p(filp) ||
-                    !test_bit(ASYNC_B_INITIALIZED, &self->flags)) {
-                        retval = (self->flags & ASYNC_HUP_NOTIFY) ?
+                    !test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+                        retval = (port->flags & ASYNC_HUP_NOTIFY) ?
                                         -EAGAIN : -ERESTARTSYS;
                         break;
                 }
@@ -317,8 +339,8 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
                  * specified, we cannot return before the IrCOMM link is
                  * ready
                  */
-                if (!test_bit(ASYNC_B_CLOSING, &self->flags) &&
-                    (do_clocal || (self->settings.dce & IRCOMM_CD)) &&
+                if (!test_bit(ASYNCB_CLOSING, &port->flags) &&
+                    (do_clocal || tty_port_carrier_raised(port)) &&
                     self->state == IRCOMM_TTY_READY)
                 {
                         break;
@@ -330,46 +352,36 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
                 }
 
                 IRDA_DEBUG(1, "%s(%d):block_til_ready blocking on %s open_count=%d\n",
-                      __FILE__,__LINE__, tty->driver->name, self->open_count );
+                      __FILE__, __LINE__, tty->driver->name, port->count);
 
                 schedule();
         }
 
         __set_current_state(TASK_RUNNING);
-        remove_wait_queue(&self->open_wait, &wait);
+        remove_wait_queue(&port->open_wait, &wait);
 
         if (extra_count) {
                 /* ++ is not atomic, so this should be protected - Jean II */
-                spin_lock_irqsave(&self->spinlock, flags);
-                self->open_count++;
-                spin_unlock_irqrestore(&self->spinlock, flags);
+                spin_lock_irqsave(&port->lock, flags);
+                port->count++;
+                spin_unlock_irqrestore(&port->lock, flags);
         }
-        self->blocked_open--;
+        port->blocked_open--;
 
         IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n",
-              __FILE__,__LINE__, tty->driver->name, self->open_count);
+              __FILE__, __LINE__, tty->driver->name, port->count);
 
         if (!retval)
-                self->flags |= ASYNC_NORMAL_ACTIVE;
+                port->flags |= ASYNC_NORMAL_ACTIVE;
 
         return retval;
 }
 
-/*
- * Function ircomm_tty_open (tty, filp)
- *
- *    This routine is called when a particular tty device is opened. This
- *    routine is mandatory; if this routine is not filled in, the attempted
- *    open will fail with ENODEV.
- */
-static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+
+static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
 {
         struct ircomm_tty_cb *self;
         unsigned int line = tty->index;
-        unsigned long   flags;
-        int ret;
-
-        IRDA_DEBUG(2, "%s()\n", __func__ );
 
         /* Check if instance already exists */
         self = hashbin_lock_find(ircomm_tty, line, NULL);
@@ -381,6 +393,8 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
                         return -ENOMEM;
                 }
 
+                tty_port_init(&self->port);
+                self->port.ops = &ircomm_port_ops;
                 self->magic = IRCOMM_TTY_MAGIC;
                 self->flow = FLOW_STOP;
 
@@ -388,13 +402,9 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
                 INIT_WORK(&self->tqueue, ircomm_tty_do_softint);
                 self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED;
                 self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED;
-                self->close_delay = 5*HZ/10;
-                self->closing_wait = 30*HZ;
 
                 /* Init some important stuff */
                 init_timer(&self->watchdog_timer);
-                init_waitqueue_head(&self->open_wait);
-                init_waitqueue_head(&self->close_wait);
                 spin_lock_init(&self->spinlock);
 
                 /*
@@ -404,31 +414,48 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
                  *
                  * Note this is completely usafe and doesn't work properly
                  */
-                tty->termios->c_iflag = 0;
-                tty->termios->c_oflag = 0;
+                tty->termios.c_iflag = 0;
+                tty->termios.c_oflag = 0;
 
                 /* Insert into hash */
                 hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL);
         }
-        /* ++ is not atomic, so this should be protected - Jean II */
-        spin_lock_irqsave(&self->spinlock, flags);
-        self->open_count++;
 
-        tty->driver_data = self;
-        self->tty = tty;
-        spin_unlock_irqrestore(&self->spinlock, flags);
+        return tty_port_install(&self->port, driver, tty);
+}
+
+/*
+ * Function ircomm_tty_open (tty, filp)
+ *
+ *    This routine is called when a particular tty device is opened. This
+ *    routine is mandatory; if this routine is not filled in, the attempted
+ *    open will fail with ENODEV.
+ */
+static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+        struct ircomm_tty_cb *self = tty->driver_data;
+        unsigned long   flags;
+        int ret;
+
+        IRDA_DEBUG(2, "%s()\n", __func__ );
+
+        /* ++ is not atomic, so this should be protected - Jean II */
+        spin_lock_irqsave(&self->port.lock, flags);
+        self->port.count++;
+        spin_unlock_irqrestore(&self->port.lock, flags);
+        tty_port_tty_set(&self->port, tty);
 
         IRDA_DEBUG(1, "%s(), %s%d, count = %d\n", __func__ , tty->driver->name,
-                   self->line, self->open_count);
+                   self->line, self->port.count);
 
         /* Not really used by us, but lets do it anyway */
-        self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+        tty->low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
         /*
          * If the port is the middle of closing, bail out now
          */
         if (tty_hung_up_p(filp) ||
-            test_bit(ASYNC_B_CLOSING, &self->flags)) {
+            test_bit(ASYNCB_CLOSING, &self->port.flags)) {
 
                 /* Hm, why are we blocking on ASYNC_CLOSING if we
                  * do return -EAGAIN/-ERESTARTSYS below anyway?
@@ -438,14 +465,15 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
                  * probably better sleep uninterruptible?
                  */
 
-                if (wait_event_interruptible(self->close_wait, !test_bit(ASYNC_B_CLOSING, &self->flags))) {
+                if (wait_event_interruptible(self->port.close_wait,
+                                !test_bit(ASYNCB_CLOSING, &self->port.flags))) {
                         IRDA_WARNING("%s - got signal while blocking on ASYNC_CLOSING!\n",
                                      __func__);
                         return -ERESTARTSYS;
                 }
 
 #ifdef SERIAL_DO_RESTART
-                return (self->flags & ASYNC_HUP_NOTIFY) ?
+                return (self->port.flags & ASYNC_HUP_NOTIFY) ?
                         -EAGAIN : -ERESTARTSYS;
 #else
                 return -EAGAIN;
@@ -453,7 +481,7 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
         }
 
         /* Check if this is a "normal" ircomm device, or an irlpt device */
-        if (line < 0x10) {
+        if (self->line < 0x10) {
                 self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE;
                 self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */
                 /* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */
@@ -469,7 +497,7 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
         if (ret)
                 return ret;
 
-        ret = ircomm_tty_block_til_ready(self, filp);
+        ret = ircomm_tty_block_til_ready(self, tty, filp);
         if (ret) {
                 IRDA_DEBUG(2,
                       "%s(), returning after block_til_ready with %d\n", __func__ ,
@@ -489,81 +517,22 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
 static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
 {
         struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
-        unsigned long flags;
+        struct tty_port *port = &self->port;
 
         IRDA_DEBUG(0, "%s()\n", __func__ );
 
         IRDA_ASSERT(self != NULL, return;);
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
 
-        spin_lock_irqsave(&self->spinlock, flags);
-
-        if (tty_hung_up_p(filp)) {
-                spin_unlock_irqrestore(&self->spinlock, flags);
-
-                IRDA_DEBUG(0, "%s(), returning 1\n", __func__ );
-                return;
-        }
-
-        if ((tty->count == 1) && (self->open_count != 1)) {
-                /*
-                 * Uh, oh.  tty->count is 1, which means that the tty
-                 * structure will be freed.  state->count should always
-                 * be one in these conditions.  If it's greater than
-                 * one, we've got real problems, since it means the
-                 * serial port won't be shutdown.
-                 */
-                IRDA_DEBUG(0, "%s(), bad serial port count; "
-                           "tty->count is 1, state->count is %d\n", __func__ ,
-                           self->open_count);
-                self->open_count = 1;
-        }
-
-        if (--self->open_count < 0) {
-                IRDA_ERROR("%s(), bad serial port count for ttys%d: %d\n",
-                           __func__, self->line, self->open_count);
-                self->open_count = 0;
-        }
-        if (self->open_count) {
-                spin_unlock_irqrestore(&self->spinlock, flags);
-
-                IRDA_DEBUG(0, "%s(), open count > 0\n", __func__ );
+        if (tty_port_close_start(port, tty, filp) == 0)
                 return;
-        }
-
-        /* Hum... Should be test_and_set_bit ??? - Jean II */
-        set_bit(ASYNC_B_CLOSING, &self->flags);
-
-        /* We need to unlock here (we were unlocking at the end of this
-         * function), because tty_wait_until_sent() may schedule.
-         * I don't know if the rest should be protected somehow,
-         * so someone should check. - Jean II */
-        spin_unlock_irqrestore(&self->spinlock, flags);
-
-        /*
-         * Now we wait for the transmit buffer to clear; and we notify
-         * the line discipline to only process XON/XOFF characters.
-         */
-        tty->closing = 1;
-        if (self->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-                tty_wait_until_sent_from_close(tty, self->closing_wait);
 
         ircomm_tty_shutdown(self);
 
         tty_driver_flush_buffer(tty);
-        tty_ldisc_flush(tty);
-
-        tty->closing = 0;
-        self->tty = NULL;
 
-        if (self->blocked_open) {
-                if (self->close_delay)
-                        schedule_timeout_interruptible(self->close_delay);
-                wake_up_interruptible(&self->open_wait);
-        }
-
-        self->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-        wake_up_interruptible(&self->close_wait);
+        tty_port_close_end(port, tty);
+        tty_port_tty_set(port, NULL);
 }
 
 /*
@@ -606,7 +575,7 @@ static void ircomm_tty_do_softint(struct work_struct *work)
         if (!self || self->magic != IRCOMM_TTY_MAGIC)
                 return;
 
-        tty = self->tty;
+        tty = tty_port_tty_get(&self->port);
         if (!tty)
                 return;
 
@@ -627,7 +596,7 @@ static void ircomm_tty_do_softint(struct work_struct *work)
         }
 
         if (tty->hw_stopped)
-                return;
+                goto put;
 
         /* Unlink transmit buffer */
         spin_lock_irqsave(&self->spinlock, flags);
@@ -646,6 +615,8 @@ static void ircomm_tty_do_softint(struct work_struct *work)
 
         /* Check if user (still) wants to be waken up */
         tty_wakeup(tty);
+put:
+        tty_kref_put(tty);
 }
 
 /*
@@ -880,7 +851,7 @@ static void ircomm_tty_throttle(struct tty_struct *tty)
                 ircomm_tty_send_xchar(tty, STOP_CHAR(tty));
 
         /* Hardware flow control? */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 self->settings.dte &= ~IRCOMM_RTS;
                 self->settings.dte |= IRCOMM_DELTA_RTS;
 
@@ -912,7 +883,7 @@ static void ircomm_tty_unthrottle(struct tty_struct *tty)
         }
 
         /* Using hardware flow control? */
-        if (tty->termios->c_cflag & CRTSCTS) {
+        if (tty->termios.c_cflag & CRTSCTS) {
                 self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS);
 
                 ircomm_param_request(self, IRCOMM_DTE, TRUE);
@@ -955,7 +926,7 @@ static void ircomm_tty_shutdown(struct ircomm_tty_cb *self)
 
         IRDA_DEBUG(0, "%s()\n", __func__ );
 
-        if (!test_and_clear_bit(ASYNC_B_INITIALIZED, &self->flags))
+        if (!test_and_clear_bit(ASYNCB_INITIALIZED, &self->port.flags))
                 return;
 
         ircomm_tty_detach_cable(self);
@@ -994,6 +965,7 @@ static void ircomm_tty_shutdown(struct ircomm_tty_cb *self)
 static void ircomm_tty_hangup(struct tty_struct *tty)
 {
         struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+        struct tty_port *port = &self->port;
         unsigned long   flags;
 
         IRDA_DEBUG(0, "%s()\n", __func__ );
@@ -1004,14 +976,17 @@ static void ircomm_tty_hangup(struct tty_struct *tty)
         /* ircomm_tty_flush_buffer(tty); */
         ircomm_tty_shutdown(self);
 
-        /* I guess we need to lock here - Jean II */
-        spin_lock_irqsave(&self->spinlock, flags);
-        self->flags &= ~ASYNC_NORMAL_ACTIVE;
-        self->tty = NULL;
-        self->open_count = 0;
-        spin_unlock_irqrestore(&self->spinlock, flags);
+        spin_lock_irqsave(&port->lock, flags);
+        port->flags &= ~ASYNC_NORMAL_ACTIVE;
+        if (port->tty) {
+                set_bit(TTY_IO_ERROR, &port->tty->flags);
+                tty_kref_put(port->tty);
+        }
+        port->tty = NULL;
+        port->count = 0;
+        spin_unlock_irqrestore(&port->lock, flags);
 
-        wake_up_interruptible(&self->open_wait);
+        wake_up_interruptible(&port->open_wait);
 }
 
 /*
@@ -1071,20 +1046,20 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
         IRDA_ASSERT(self != NULL, return;);
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
 
-        tty = self->tty;
+        tty = tty_port_tty_get(&self->port);
 
         status = self->settings.dce;
 
         if (status & IRCOMM_DCE_DELTA_ANY) {
                 /*wake_up_interruptible(&self->delta_msr_wait);*/
         }
-        if ((self->flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
+        if ((self->port.flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
                 IRDA_DEBUG(2,
                            "%s(), ircomm%d CD now %s...\n", __func__ , self->line,
                            (status & IRCOMM_CD) ? "on" : "off");
 
                 if (status & IRCOMM_CD) {
-                        wake_up_interruptible(&self->open_wait);
+                        wake_up_interruptible(&self->port.open_wait);
                 } else {
                         IRDA_DEBUG(2,
                                    "%s(), Doing serial hangup..\n", __func__ );
@@ -1092,10 +1067,10 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
                                 tty_hangup(tty);
 
                         /* Hangup will remote the tty, so better break out */
-                        return;
+                        goto put;
                 }
         }
-        if (self->flags & ASYNC_CTS_FLOW) {
+        if (tty && tty_port_cts_enabled(&self->port)) {
                 if (tty->hw_stopped) {
                         if (status & IRCOMM_CTS) {
                                 IRDA_DEBUG(2,
@@ -1103,10 +1078,10 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
                                 tty->hw_stopped = 0;
 
                                 /* Wake up processes blocked on open */
-                                wake_up_interruptible(&self->open_wait);
+                                wake_up_interruptible(&self->port.open_wait);
 
                                 schedule_work(&self->tqueue);
-                                return;
+                                goto put;
                         }
                 } else {
                         if (!(status & IRCOMM_CTS)) {
@@ -1116,6 +1091,8 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
                         }
                 }
         }
+put:
+        tty_kref_put(tty);
 }
 
 /*
@@ -1128,6 +1105,7 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
                                       struct sk_buff *skb)
 {
         struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+        struct tty_struct *tty;
 
         IRDA_DEBUG(2, "%s()\n", __func__ );
 
@@ -1135,7 +1113,8 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
         IRDA_ASSERT(skb != NULL, return -1;);
 
-        if (!self->tty) {
+        tty = tty_port_tty_get(&self->port);
+        if (!tty) {
                 IRDA_DEBUG(0, "%s(), no tty!\n", __func__ );
                 return 0;
         }
@@ -1146,7 +1125,7 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
          * Devices like WinCE can do this, and since they don't send any
          * params, we can just as well declare the hardware for running.
          */
-        if (self->tty->hw_stopped && (self->flow == FLOW_START)) {
+        if (tty->hw_stopped && (self->flow == FLOW_START)) {
                 IRDA_DEBUG(0, "%s(), polling for line settings!\n", __func__ );
                 ircomm_param_request(self, IRCOMM_POLL, TRUE);
 
@@ -1159,8 +1138,9 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
          * Use flip buffer functions since the code may be called from interrupt
          * context
          */
-        tty_insert_flip_string(self->tty, skb->data, skb->len);
-        tty_flip_buffer_push(self->tty);
+        tty_insert_flip_string(tty, skb->data, skb->len);
+        tty_flip_buffer_push(tty);
+        tty_kref_put(tty);
 
         /* No need to kfree_skb - see ircomm_ttp_data_indication() */
 
@@ -1211,12 +1191,13 @@ static void ircomm_tty_flow_indication(void *instance, void *sap,
         IRDA_ASSERT(self != NULL, return;);
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
 
-        tty = self->tty;
+        tty = tty_port_tty_get(&self->port);
 
         switch (cmd) {
         case FLOW_START:
                 IRDA_DEBUG(2, "%s(), hw start!\n", __func__ );
-                tty->hw_stopped = 0;
+                if (tty)
+                        tty->hw_stopped = 0;
 
                 /* ircomm_tty_do_softint will take care of the rest */
                 schedule_work(&self->tqueue);
@@ -1224,15 +1205,19 @@ static void ircomm_tty_flow_indication(void *instance, void *sap,
         default:  /* If we get here, something is very wrong, better stop */
         case FLOW_STOP:
                 IRDA_DEBUG(2, "%s(), hw stopped!\n", __func__ );
-                tty->hw_stopped = 1;
+                if (tty)
+                        tty->hw_stopped = 1;
                 break;
         }
+
+        tty_kref_put(tty);
         self->flow = cmd;
 }
 
 #ifdef CONFIG_PROC_FS
 static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
 {
+        struct tty_struct *tty;
         char sep;
 
         seq_printf(m, "State: %s\n", ircomm_tty_state[self->state]);
@@ -1328,40 +1313,43 @@ static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
 
         seq_puts(m, "Flags:");
         sep = ' ';
-        if (self->flags & ASYNC_CTS_FLOW) {
+        if (tty_port_cts_enabled(&self->port)) {
                 seq_printf(m, "%cASYNC_CTS_FLOW", sep);
                 sep = '|';
         }
-        if (self->flags & ASYNC_CHECK_CD) {
+        if (self->port.flags & ASYNC_CHECK_CD) {
                 seq_printf(m, "%cASYNC_CHECK_CD", sep);
                 sep = '|';
         }
-        if (self->flags & ASYNC_INITIALIZED) {
+        if (self->port.flags & ASYNC_INITIALIZED) {
                 seq_printf(m, "%cASYNC_INITIALIZED", sep);
                 sep = '|';
         }
-        if (self->flags & ASYNC_LOW_LATENCY) {
+        if (self->port.flags & ASYNC_LOW_LATENCY) {
                 seq_printf(m, "%cASYNC_LOW_LATENCY", sep);
                 sep = '|';
         }
-        if (self->flags & ASYNC_CLOSING) {
+        if (self->port.flags & ASYNC_CLOSING) {
                 seq_printf(m, "%cASYNC_CLOSING", sep);
                 sep = '|';
         }
-        if (self->flags & ASYNC_NORMAL_ACTIVE) {
+        if (self->port.flags & ASYNC_NORMAL_ACTIVE) {
                 seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep);
                 sep = '|';
         }
         seq_putc(m, '\n');
 
         seq_printf(m, "Role: %s\n", self->client ? "client" : "server");
-        seq_printf(m, "Open count: %d\n", self->open_count);
+        seq_printf(m, "Open count: %d\n", self->port.count);
         seq_printf(m, "Max data size: %d\n", self->max_data_size);
         seq_printf(m, "Max header size: %d\n", self->max_header_size);
 
-        if (self->tty)
+        tty = tty_port_tty_get(&self->port);
+        if (tty) {
                 seq_printf(m, "Hardware: %s\n",
-                               self->tty->hw_stopped ? "Stopped" : "Running");
+                               tty->hw_stopped ? "Stopped" : "Running");
+                tty_kref_put(tty);
+        }
 }
 
 static int ircomm_tty_proc_show(struct seq_file *m, void *v)
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
index b65d66e0d817..edab393e0c82 100644
--- a/net/irda/ircomm/ircomm_tty_attach.c
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -130,6 +130,8 @@ static int (*state[])(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
  */
 int ircomm_tty_attach_cable(struct ircomm_tty_cb *self)
 {
+        struct tty_struct *tty;
+
         IRDA_DEBUG(0, "%s()\n", __func__ );
 
         IRDA_ASSERT(self != NULL, return -1;);
@@ -142,7 +144,11 @@ int ircomm_tty_attach_cable(struct ircomm_tty_cb *self)
         }
 
         /* Make sure nobody tries to write before the link is up */
-        self->tty->hw_stopped = 1;
+        tty = tty_port_tty_get(&self->port);
+        if (tty) {
+                tty->hw_stopped = 1;
+                tty_kref_put(tty);
+        }
 
         ircomm_tty_ias_register(self);
 
@@ -398,23 +404,26 @@ void ircomm_tty_disconnect_indication(void *instance, void *sap,
                                       struct sk_buff *skb)
 {
         struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+        struct tty_struct *tty;
 
         IRDA_DEBUG(2, "%s()\n", __func__ );
 
         IRDA_ASSERT(self != NULL, return;);
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
 
-        if (!self->tty)
+        tty = tty_port_tty_get(&self->port);
+        if (!tty)
                 return;
 
         /* This will stop control data transfers */
         self->flow = FLOW_STOP;
 
         /* Stop data transfers */
-        self->tty->hw_stopped = 1;
+        tty->hw_stopped = 1;
 
         ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL,
                             NULL);
+        tty_kref_put(tty);
 }
 
 /*
@@ -550,12 +559,15 @@ void ircomm_tty_connect_indication(void *instance, void *sap,
  */
 void ircomm_tty_link_established(struct ircomm_tty_cb *self)
 {
+        struct tty_struct *tty;
+
         IRDA_DEBUG(2, "%s()\n", __func__ );
 
         IRDA_ASSERT(self != NULL, return;);
         IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
 
-        if (!self->tty)
+        tty = tty_port_tty_get(&self->port);
+        if (!tty)
                 return;
 
         del_timer(&self->watchdog_timer);
@@ -566,19 +578,22 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self)
          * will have to wait for the peer device (DCE) to raise the CTS
          * line.
          */
-        if ((self->flags & ASYNC_CTS_FLOW) && ((self->settings.dce & IRCOMM_CTS) == 0)) {
+        if (tty_port_cts_enabled(&self->port) &&
+                        ((self->settings.dce & IRCOMM_CTS) == 0)) {
                 IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __func__ );
-                return;
+                goto put;
         } else {
                 IRDA_DEBUG(1, "%s(), starting hardware!\n", __func__ );
 
-                self->tty->hw_stopped = 0;
+                tty->hw_stopped = 0;
 
                 /* Wake up processes blocked on open */
-                wake_up_interruptible(&self->open_wait);
+                wake_up_interruptible(&self->port.open_wait);
         }
 
         schedule_work(&self->tqueue);
+put:
+        tty_kref_put(tty);
 }
 
 /*
@@ -977,14 +992,17 @@ static int ircomm_tty_state_ready(struct ircomm_tty_cb *self,
                 ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
                 ircomm_tty_start_watchdog_timer(self, 3*HZ);
 
-                if (self->flags & ASYNC_CHECK_CD) {
+                if (self->port.flags & ASYNC_CHECK_CD) {
                         /* Drop carrier */
                         self->settings.dce = IRCOMM_DELTA_CD;
                         ircomm_tty_check_modem_status(self);
                 } else {
+                        struct tty_struct *tty = tty_port_tty_get(&self->port);
                         IRDA_DEBUG(0, "%s(), hanging up!\n", __func__ );
-                        if (self->tty)
-                                tty_hangup(self->tty);
+                        if (tty) {
+                                tty_hangup(tty);
+                                tty_kref_put(tty);
+                        }
                 }
                 break;
         default:
diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
index d0667d68351d..b343f50dc8d7 100644
--- a/net/irda/ircomm/ircomm_tty_ioctl.c
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -52,17 +52,18 @@
  *    Change speed of the driver. If the remote device is a DCE, then this
  *    should make it change the speed of its serial port
  */
-static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
+                struct tty_struct *tty)
 {
         unsigned int cflag, cval;
         int baud;
 
         IRDA_DEBUG(2, "%s()\n", __func__ );
 
-        if (!self->tty || !self->tty->termios || !self->ircomm)
+        if (!self->ircomm)
                 return;
 
-        cflag = self->tty->termios->c_cflag;
+        cflag = tty->termios.c_cflag;
 
         /*  byte size and parity */
         switch (cflag & CSIZE) {
@@ -81,7 +82,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
                 cval |= IRCOMM_PARITY_EVEN;
 
         /* Determine divisor based on baud rate */
-        baud = tty_get_baud_rate(self->tty);
+        baud = tty_get_baud_rate(tty);
         if (!baud)
                 baud = 9600;    /* B0 transition handled in rs_set_termios */
 
@@ -90,19 +91,19 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
 
         /* CTS flow control flag and modem status interrupts */
         if (cflag & CRTSCTS) {
-                self->flags |= ASYNC_CTS_FLOW;
+                self->port.flags |= ASYNC_CTS_FLOW;
                 self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
                 /* This got me. Bummer. Jean II */
                 if (self->service_type == IRCOMM_3_WIRE_RAW)
                         IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __func__);
         } else {
-                self->flags &= ~ASYNC_CTS_FLOW;
+                self->port.flags &= ~ASYNC_CTS_FLOW;
                 self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
         }
         if (cflag & CLOCAL)
-                self->flags &= ~ASYNC_CHECK_CD;
+                self->port.flags &= ~ASYNC_CHECK_CD;
         else
-                self->flags |= ASYNC_CHECK_CD;
+                self->port.flags |= ASYNC_CHECK_CD;
 #if 0
         /*
          * Set up parity check flag
@@ -148,18 +149,18 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
                             struct ktermios *old_termios)
 {
         struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
-        unsigned int cflag = tty->termios->c_cflag;
+        unsigned int cflag = tty->termios.c_cflag;
 
         IRDA_DEBUG(2, "%s()\n", __func__ );
 
         if ((cflag == old_termios->c_cflag) &&
-            (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+            (RELEVANT_IFLAG(tty->termios.c_iflag) ==
              RELEVANT_IFLAG(old_termios->c_iflag)))
         {
                 return;
         }
 
-        ircomm_tty_change_speed(self);
+        ircomm_tty_change_speed(self, tty);
 
         /* Handle transition to B0 status */
         if ((old_termios->c_cflag & CBAUD) &&
@@ -172,7 +173,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
         if (!(old_termios->c_cflag & CBAUD) &&
             (cflag & CBAUD)) {
                 self->settings.dte |= IRCOMM_DTR;
-                if (!(tty->termios->c_cflag & CRTSCTS) ||
+                if (!(tty->termios.c_cflag & CRTSCTS) ||
                     !test_bit(TTY_THROTTLED, &tty->flags)) {
                         self->settings.dte |= IRCOMM_RTS;
                 }
@@ -181,7 +182,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
 
         /* Handle turning off CRTSCTS */
         if ((old_termios->c_cflag & CRTSCTS) &&
-            !(tty->termios->c_cflag & CRTSCTS))
+            !(tty->termios.c_cflag & CRTSCTS))
         {
                 tty->hw_stopped = 0;
                 ircomm_tty_start(tty);
@@ -270,10 +271,10 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
 
         memset(&info, 0, sizeof(info));
         info.line = self->line;
-        info.flags = self->flags;
+        info.flags = self->port.flags;
         info.baud_base = self->settings.data_rate;
-        info.close_delay = self->close_delay;
-        info.closing_wait = self->closing_wait;
+        info.close_delay = self->port.close_delay;
+        info.closing_wait = self->port.closing_wait;
 
         /* For compatibility  */
         info.type = PORT_16550A;