18 files changed, 158 insertions, 116 deletions

diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index 7fa3bb0d2397..a08783823b32 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable)
 
         @ enable access to CP0 and CP1
         XSC(mrc p15, 0, r4, c15, c1, 0)
-        XSC(orr r4, r4, #0xf)
+        XSC(orr r4, r4, #0x3)
         XSC(mcr p15, 0, r4, c15, c1, 0)
         PJ4(mrc p15, 0, r4, c1, c0, 2)
-        PJ4(orr r4, r4, #0x3)
+        PJ4(orr r4, r4, #0xf)
         PJ4(mcr p15, 0, r4, c1, c0, 2)
 
         mov     r0, #0                          @ nothing to load
@@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch)
         teq     r2, r3                          @ next task owns it?
         movne   pc, lr                          @ no: leave Concan disabled
 
-1:      @ flip Conan access
+1:      @ flip Concan access
         XSC(eor r1, r1, #0x3)
         XSC(mcr p15, 0, r1, c15, c1, 0)
         PJ4(eor r1, r1, #0xf)
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index 0fc7ba56d616..e63e23504fe5 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -331,6 +331,9 @@ int __init mx25_clocks_init(void)
         __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
                         CRM_BASE + 0x64);
 
+        /* Clock source for gpt is ahb_div */
+        __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
+
         mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
         return 0;
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6707de0ab716..6778f8193bc6 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <sound/tlv320aic32x4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
         .invert = 0,
 };
 
+static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
+        .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
+                     AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
+                     AIC32X4_PWR_AIC32X4_LDO_ENABLE |
+                     AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
+                     AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
+        .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
+                         AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
+        .swapdacs = false,
+};
+
 static struct i2c_board_info visstrim_m10_i2c_devices[] = {
         {
                 I2C_BOARD_INFO("pca9555", 0x20),
@@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
         },
         {
                 I2C_BOARD_INFO("tlv320aic32x4", 0x18),
+                .platform_data = &visstrim_m10_aic32x4_pdata,
         }
 };
 
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 0ce49478a479..29ca8907a780 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
 #endif
 };
 
-static void mxc_init_i2c(void)
+static void __init mxc_init_i2c(void)
 {
         i2c_register_board_info(1, mx31ads_i2c1_devices,
                                 ARRAY_SIZE(mx31ads_i2c1_devices));
@@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = {
         MX31_PIN_STXD5__STXD5,
 };
 
-static void mxc_init_audio(void)
+static void __init mxc_init_audio(void)
 {
         imx31_add_imx_ssi(0, NULL);
         mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 750368ddf0f9..126913ad106a 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
         .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 };
 
-static void lilly1131_usb_init(void)
+static void __init lilly1131_usb_init(void)
 {
         imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
 
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index c070c24255f4..98e25d9aaab6 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -16,16 +16,18 @@
 #include <mach/gpio.h>
 #include <mach/pxa168.h>
 #include <mach/mfp-pxa168.h>
-#include <mach/mfp-gplugd.h>
 
 #include "common.h"
 
 static unsigned long gplugd_pin_config[] __initdata = {
         /* UART3 */
-        GPIO8_UART3_SOUT,
-        GPIO9_UART3_SIN,
-        GPI1O_UART3_CTS,
-        GPI11_UART3_RTS,
+        GPIO8_UART3_TXD,
+        GPIO9_UART3_RXD,
+        GPIO1O_UART3_CTS,
+        GPIO11_UART3_RTS,
+
+        /* USB OTG PEN */
+        GPIO18_GPIO,
 
         /* MMC2 */
         GPIO28_MMC2_CMD,
@@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = {
         GPIO105_CI2C_SDA,
         GPIO106_CI2C_SCL,
 
+        /* SPI NOR Flash on SSP2 */
+        GPIO107_SSP2_RXD,
+        GPIO108_SSP2_TXD,
+        GPIO110_GPIO,     /* SPI_CSn */
+        GPIO111_SSP2_CLK,
+
         /* Select JTAG */
         GPIO109_GPIO,
 
@@ -154,7 +162,7 @@ static void __init select_disp_freq(void)
                                 "frequency\n");
         } else {
                 gpio_direction_output(35, 1);
-                gpio_free(104);
+                gpio_free(35);
         }
 
         if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
@@ -162,7 +170,7 @@ static void __init select_disp_freq(void)
                                 "frequency\n");
         } else {
                 gpio_direction_output(85, 0);
-                gpio_free(104);
+                gpio_free(85);
         }
 }
 
diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
deleted file mode 100644
index b8cf38d85600..000000000000
--- a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
- *
- *   MFP definitions used in gplugD
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MFP_GPLUGD_H
-#define __MACH_MFP_GPLUGD_H
-
-#include <plat/mfp.h>
-#include <mach/mfp.h>
-
-/* UART3 */
-#define GPIO8_UART3_SOUT       MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_SIN        MFP_CFG(GPIO9, AF2)
-#define GPI1O_UART3_CTS        MFP_CFG(GPIO10, AF2)
-#define GPI11_UART3_RTS        MFP_CFG(GPIO11, AF2)
-
-/* MMC2 */
-#define GPIO28_MMC2_CMD         MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define GPIO29_MMC2_CLK         MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define GPIO30_MMC2_DAT0        MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define GPIO31_MMC2_DAT1        MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define GPIO32_MMC2_DAT2        MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define GPIO33_MMC2_DAT3        MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* I2S */
-#undef GPIO114_I2S_FRM
-#undef GPIO115_I2S_BCLK
-
-#define GPIO114_I2S_FRM         MFP_CFG_DRV(GPIO114, AF1, FAST)
-#define GPIO115_I2S_BCLK        MFP_CFG_DRV(GPIO115, AF1, FAST)
-#define GPIO116_I2S_TXD         MFP_CFG_DRV(GPIO116, AF1, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* OTG GPIO */
-#define GPIO_USB_OTG_PEN        18
-#define GPIO_USB_OIDIR          20
-
-/* Other GPIOs are 35, 84, 85 */
-#endif /* __MACH_MFP_GPLUGD_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 8c782328b21c..92aaa3c19d61 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -203,6 +203,10 @@
 #define GPIO33_CF_nCD2          MFP_CFG(GPIO33, AF3)
 
 /* UART */
+#define GPIO8_UART3_TXD         MFP_CFG(GPIO8, AF2)
+#define GPIO9_UART3_RXD         MFP_CFG(GPIO9, AF2)
+#define GPIO1O_UART3_CTS        MFP_CFG(GPIO10, AF2)
+#define GPIO11_UART3_RTS        MFP_CFG(GPIO11, AF2)
 #define GPIO88_UART2_TXD        MFP_CFG(GPIO88, AF2)
 #define GPIO89_UART2_RXD        MFP_CFG(GPIO89, AF2)
 #define GPIO107_UART1_TXD       MFP_CFG_DRV(GPIO107, AF1, FAST)
@@ -232,6 +236,22 @@
 #define GPIO53_MMC1_CD          MFP_CFG(GPIO53, AF1)
 #define GPIO46_MMC1_WP          MFP_CFG(GPIO46, AF1)
 
+/* MMC2 */
+#define GPIO28_MMC2_CMD         MFP_CFG_DRV(GPIO28, AF6, FAST)
+#define GPIO29_MMC2_CLK         MFP_CFG_DRV(GPIO29, AF6, FAST)
+#define GPIO30_MMC2_DAT0        MFP_CFG_DRV(GPIO30, AF6, FAST)
+#define GPIO31_MMC2_DAT1        MFP_CFG_DRV(GPIO31, AF6, FAST)
+#define GPIO32_MMC2_DAT2        MFP_CFG_DRV(GPIO32, AF6, FAST)
+#define GPIO33_MMC2_DAT3        MFP_CFG_DRV(GPIO33, AF6, FAST)
+
+/* MMC4 */
+#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
+#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
+#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
+#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
+#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
+#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
+
 /* LCD */
 #define GPIO84_LCD_CS           MFP_CFG(GPIO84, AF1)
 #define GPIO60_LCD_DD0          MFP_CFG(GPIO60, AF1)
@@ -269,11 +289,12 @@
 #define GPIO106_CI2C_SCL        MFP_CFG(GPIO106, AF1)
 
 /* I2S */
-#define GPIO113_I2S_MCLK        MFP_CFG(GPIO113,AF6)
-#define GPIO114_I2S_FRM         MFP_CFG(GPIO114,AF1)
-#define GPIO115_I2S_BCLK        MFP_CFG(GPIO115,AF1)
-#define GPIO116_I2S_RXD         MFP_CFG(GPIO116,AF2)
-#define GPIO117_I2S_TXD         MFP_CFG(GPIO117,AF2)
+#define GPIO113_I2S_MCLK        MFP_CFG(GPIO113, AF6)
+#define GPIO114_I2S_FRM         MFP_CFG(GPIO114, AF1)
+#define GPIO115_I2S_BCLK        MFP_CFG(GPIO115, AF1)
+#define GPIO116_I2S_RXD         MFP_CFG(GPIO116, AF2)
+#define GPIO116_I2S_TXD         MFP_CFG(GPIO116, AF1)
+#define GPIO117_I2S_TXD         MFP_CFG(GPIO117, AF2)
 
 /* PWM */
 #define GPIO96_PWM3_OUT         MFP_CFG(GPIO96, AF1)
@@ -324,4 +345,10 @@
 #define GPIO101_MII_MDIO        MFP_CFG(GPIO101, AF5)
 #define GPIO103_RX_DV           MFP_CFG(GPIO103, AF5)
 
+/* SSP2 */
+#define GPIO107_SSP2_RXD        MFP_CFG(GPIO107, AF4)
+#define GPIO108_SSP2_TXD        MFP_CFG(GPIO108, AF4)
+#define GPIO111_SSP2_CLK        MFP_CFG(GPIO111, AF4)
+#define GPIO112_SSP2_FRM        MFP_CFG(GPIO112, AF4)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 99833b9485cf..4e91ee6e27c8 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -51,12 +51,12 @@ static inline uint32_t timer_read(void)
 {
         int delay = 100;
 
-        __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+        __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
 
         while (delay--)
                 cpu_relax();
 
-        return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+        return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
 }
 
 unsigned long long notrace sched_clock(void)
@@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
         struct clock_event_device *c = dev_id;
 
-        /* disable and clear pending interrupt status */
-        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
-        __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+        /*
+         * Clear pending interrupt status.
+         */
+        __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+
+        /*
+         * Disable timer 0.
+         */
+        __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
         c->event_handler(c);
+
         return IRQ_HANDLED;
 }
 
 static int timer_set_next_event(unsigned long delta,
                                 struct clock_event_device *dev)
 {
-        unsigned long flags, next;
+        unsigned long flags;
 
         local_irq_save(flags);
 
-        /* clear pending interrupt status and enable */
+        /*
+         * Disable timer 0.
+         */
+        __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+
+        /*
+         * Clear and enable timer match 0 interrupt.
+         */
         __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
         __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
 
-        next = timer_read() + delta;
-        __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+        /*
+         * Setup new clockevent timer value.
+         */
+        __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+        /*
+         * Enable timer 0.
+         */
+        __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
 
         local_irq_restore(flags);
+
         return 0;
 }
 
@@ -145,23 +168,26 @@ static struct clocksource cksrc = {
 static void __init timer_config(void)
 {
         uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
-        uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
-        uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
 
-        __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
 
-        ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
+        ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
+                (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
         __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
 
-        /* free-running mode */
-        __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+        /* set timer 0 to periodic mode, and timer 1 to free-running mode */
+        __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
 
-        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+        __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
         __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
         __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
 
-        /* enable timer counter */
-        __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
+        __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1));  /* clear status */
+        __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
+
+        /* enable timer 1 counter */
+        __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
 }
 
 static struct irqaction timer_irq = {
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa70266..68934ea8725a 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
                 .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-                .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+                .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
                 .irqflags = IRQF_TRIGGER_HIGH,
                 .uartclk = CPUIMX51_QUART_XTAL,
                 .regshift = CPUIMX51_QUART_REGSHIFT,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index e400b09109ce..11b0ff67f89d 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void)
                                         ARRAY_SIZE(mx51babbage_pads));
 
         imx51_add_imx_uart(0, &uart_pdata);
-        imx51_add_imx_uart(1, &uart_pdata);
+        imx51_add_imx_uart(1, NULL);
         imx51_add_imx_uart(2, &uart_pdata);
 
         babbage_fec_reset();
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index f70700dc0ec1..551daf85ff8c 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void)
         gpio_request(EFIKAMX_PCBID2, "pcbid2");
         gpio_direction_input(EFIKAMX_PCBID2);
 
-        id = gpio_get_value(EFIKAMX_PCBID0);
-        id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
-        id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+        id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
+        id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
+        id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
 
         switch (id) {
         case 7:
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 2e4d9d32a87c..8a9bca22beb5 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = {
         {
                 .code = KEY_POWER,
                 .gpio = EFIKASB_PWRKEY,
-                .type = EV_PWR,
+                .type = EV_KEY,
                 .desc = "Power Button",
                 .wakeup = 1,
-                .debounce_interval = 10, /* ms */
+                .active_low = 1,
         },
         {
                 .code = SW_LID,
                 .gpio = EFIKASB_LID,
                 .type = EV_SW,
                 .desc = "Lid Switch",
+                .active_low = 1,
         },
         {
-                /* SW_RFKILLALL vs KEY_RFKILL ? */
-                .code = SW_RFKILL_ALL,
+                .code = KEY_RFKILL,
                 .gpio = EFIKASB_RFKILL,
-                .type = EV_SW,
+                .type = EV_KEY,
                 .desc = "rfkill",
+                .active_low = 1,
         },
 };
 
@@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void)
         gpio_request(EFIKASB_PCBID1, "pcb id1");
         gpio_direction_input(EFIKASB_PCBID1);
 
-        id = gpio_get_value(EFIKASB_PCBID0);
-        id |= gpio_get_value(EFIKASB_PCBID1) << 1;
+        id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
+        id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
 
         switch (id) {
         default:
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 7f20308c4dbd..f7bf996f463b 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk)
         int i = 0;
 
         pllbase = _get_pll_base(clk);
-        reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+        reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+        if (reg & MXC_PLL_DP_CTL_UPEN)
+                return 0;
+
+        reg |= MXC_PLL_DP_CTL_UPEN;
         __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
 
         /* Wait for lock */
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 4435e03cea5d..c9209454807a 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 
         mdelay(10);
 
-        return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
+        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
 static struct mxc_usbh_platform_data usbh1_config = {
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
index 964c6c3cd7a6..dd39fee59549 100644
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -28,6 +28,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/nanoengine.h>
+#include <mach/hardware.h>
 
 static DEFINE_SPINLOCK(nano_lock);
 
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 91fc7cdb5dc9..e4dde91f0231 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,14 @@
 #define UART_PADDR      MX51_UART1_BASE_ADDR
 #endif
 
+/* iMX50/53 have same addresses, but not iMX51 */
+#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR      MX53_UART1_BASE_ADDR
+#endif
+
 #define UART_VADDR      IMX_IO_ADDRESS(UART_PADDR)
 
                 .macro  addruart, rp, rv
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 9440b9e00e89..5408fd1fc736 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -30,6 +30,9 @@
 #define MX53_SDHC_PAD_CTRL      (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
                                 PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
                                 PAD_CTL_SRE_FAST)
+#define PAD_CTRL_I2C    (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \
+                        PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \
+                        | PAD_CTL_HYS)
 
 #define _MX53_PAD_GPIO_19__KPP_COL_5            IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
 #define _MX53_PAD_GPIO_19__GPIO4_5              IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
@@ -1256,7 +1259,7 @@
 #define MX53_PAD_KEY_COL3__GPIO4_12             (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__USBOH3_H2_DP         (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__SPDIF_IN1            (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__I2C2_SCL             (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL3__I2C2_SCL             (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_KEY_COL3__ECSPI1_SS3           (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__FEC_CRS              (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK             (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1264,7 +1267,7 @@
 #define MX53_PAD_KEY_ROW3__GPIO4_13             (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__USBOH3_H2_DM         (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK             (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__I2C2_SDA             (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW3__I2C2_SDA             (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT               (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP         (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0          (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1536,7 +1539,7 @@
 #define MX53_PAD_CSI0_DAT8__KPP_COL_7           (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK         (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC             (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA            (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA            (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37            (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5                (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9                (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1544,7 +1547,7 @@
 #define MX53_PAD_CSI0_DAT9__KPP_ROW_7           (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI         (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR            (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL            (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL            (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38            (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6                (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10              (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1631,25 +1634,25 @@
 #define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK               (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS              (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB2__ECSPI1_SS0            (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__I2C2_SCL              (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB2__I2C2_SCL              (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D16__EMI_WEIM_D_16         (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__GPIO3_16              (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__IPU_DI0_PIN5          (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK            (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D16__ECSPI1_SCLK           (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__I2C2_SDA              (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D16__I2C2_SDA              (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D17__EMI_WEIM_D_17         (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__GPIO3_17              (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__IPU_DI0_PIN6          (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN            (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D17__ECSPI1_MISO           (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__I2C3_SCL              (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D17__I2C3_SCL              (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D18__EMI_WEIM_D_18         (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__GPIO3_18              (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__IPU_DI0_PIN7          (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO            (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D18__ECSPI1_MOSI           (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__I2C3_SDA              (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D18__I2C3_SDA              (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D18__IPU_DI1_D0_CS         (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D19__EMI_WEIM_D_19         (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D19__GPIO3_19              (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1672,7 +1675,7 @@
 #define MX53_PAD_EIM_D21__IPU_DI0_PIN17         (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK            (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D21__CSPI_SCLK             (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__I2C1_SCL              (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D21__I2C1_SCL              (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC              (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D22__EMI_WEIM_D_22         (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D22__GPIO3_22              (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1732,7 +1735,7 @@
 #define MX53_PAD_EIM_D28__UART2_CTS             (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO            (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__CSPI_MOSI             (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__I2C1_SDA              (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__I2C1_SDA              (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_EIM_D28__IPU_EXT_TRIG          (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__IPU_DI0_PIN13         (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29         (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2297,7 +2300,7 @@
 #define MX53_PAD_GPIO_9__SCC_FAIL_STATE         (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__ESAI1_HCKR             (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__GPIO1_3                (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__I2C3_SCL               (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_3__I2C3_SCL               (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN         (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__CCM_CLKO2              (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0             (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2305,7 +2308,7 @@
 #define MX53_PAD_GPIO_3__MLB_MLBCLK             (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__ESAI1_SCKT             (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__GPIO1_6                (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__I2C3_SDA               (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_6__I2C3_SDA               (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_6__CCM_CCM_OUT_0          (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB                (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1             (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2333,7 +2336,7 @@
 #define MX53_PAD_GPIO_5__CCM_CLKO               (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2            (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4             (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__I2C3_SCL               (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_5__I2C3_SCL               (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_5__CCM_PLL1_BYP           (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1          (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__GPIO1_7                (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2356,7 +2359,7 @@
 #define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT              (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1          (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_16__SPDIF_IN1             (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__I2C3_SDA              (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_16__I2C3_SDA              (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
 #define MX53_PAD_GPIO_16__SJC_DE_B              (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_17__ESAI1_TX0             (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_17__GPIO7_12              (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL))