2 files changed, 48 insertions, 105 deletions

diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index 48a16d865834..bc449166d18d 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -129,9 +129,6 @@ enum GA_REG {
 #define DMA_8BIT  0x80
 
 
-#define AD1845_FREQ_SEL_MSB    0x16
-#define AD1845_FREQ_SEL_LSB    0x17
-
 enum card_type {
         SSCAPE,
         SSCAPE_PNP,
@@ -955,82 +952,6 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l
 
 
 /*
- * Override for the CS4231 playback format function.
- * The AD1845 has much simpler format and rate selection.
- */
-static void ad1845_playback_format(struct snd_wss *chip,
-                                   struct snd_pcm_hw_params *params,
-                                   unsigned char format)
-{
-        unsigned long flags;
-        unsigned rate = params_rate(params);
-
-        /*
-         * The AD1845 can't handle sample frequencies
-         * outside of 4 kHZ to 50 kHZ
-         */
-        if (rate > 50000)
-                rate = 50000;
-        else if (rate < 4000)
-                rate = 4000;
-
-        spin_lock_irqsave(&chip->reg_lock, flags);
-
-        /*
-         * Program the AD1845 correctly for the playback stream.
-         * Note that we do NOT need to toggle the MCE bit because
-         * the PLAYBACK_ENABLE bit of the Interface Configuration
-         * register is set.
-         * 
-         * NOTE: We seem to need to write to the MSB before the LSB
-         *       to get the correct sample frequency.
-         */
-        snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0));
-        snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
-        snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
-
-        spin_unlock_irqrestore(&chip->reg_lock, flags);
-}
-
-/*
- * Override for the CS4231 capture format function. 
- * The AD1845 has much simpler format and rate selection.
- */
-static void ad1845_capture_format(struct snd_wss *chip,
-                                  struct snd_pcm_hw_params *params,
-                                  unsigned char format)
-{
-        unsigned long flags;
-        unsigned rate = params_rate(params);
-
-        /*
-         * The AD1845 can't handle sample frequencies 
-         * outside of 4 kHZ to 50 kHZ
-         */
-        if (rate > 50000)
-                rate = 50000;
-        else if (rate < 4000)
-                rate = 4000;
-
-        spin_lock_irqsave(&chip->reg_lock, flags);
-
-        /*
-         * Program the AD1845 correctly for the playback stream.
-         * Note that we do NOT need to toggle the MCE bit because
-         * the CAPTURE_ENABLE bit of the Interface Configuration
-         * register is set.
-         *
-         * NOTE: We seem to need to write to the MSB before the LSB
-         *       to get the correct sample frequency.
-         */
-        snd_wss_out(chip, CS4231_REC_FORMAT, (format & 0xf0));
-        snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
-        snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
-
-        spin_unlock_irqrestore(&chip->reg_lock, flags);
-}
-
-/*
  * Create an AD1845 PCM subdevice on the SoundScape. The AD1845
  * is very much like a CS4231, with a few extra bits. We will
  * try to support at least some of the extra bits by overriding
@@ -1055,11 +976,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
                 unsigned long flags;
                 struct snd_pcm *pcm;
 
-#define AD1845_FREQ_SEL_ENABLE  0x08
-
-#define AD1845_PWR_DOWN_CTRL   0x1b
-#define AD1845_CRYS_CLOCK_SEL  0x1d
-
 /*
  * It turns out that the PLAYBACK_ENABLE bit is set
  * by the lowlevel driver ...
@@ -1074,7 +990,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
  */
 
                 if (sscape->type != SSCAPE_VIVO) {
-                        int val;
                         /*
                          * The input clock frequency on the SoundScape must
                          * be 14.31818 MHz, because we must set this register
@@ -1082,22 +997,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
                          */
                         snd_wss_mce_up(chip);
                         spin_lock_irqsave(&chip->reg_lock, flags);
-                        snd_wss_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20);
+                        snd_wss_out(chip, AD1845_CLOCK, 0x20);
                         spin_unlock_irqrestore(&chip->reg_lock, flags);
                         snd_wss_mce_down(chip);
 
-                        /*
-                         * More custom configuration:
-                         * a) select "mode 2" and provide a current drive of 8mA
-                         * b) enable frequency selection (for capture/playback)
-                         */
-                        spin_lock_irqsave(&chip->reg_lock, flags);
-                        snd_wss_out(chip, CS4231_MISC_INFO,
-                                    CS4231_MODE2 | 0x10);
-                        val = snd_wss_in(chip, AD1845_PWR_DOWN_CTRL);
-                        snd_wss_out(chip, AD1845_PWR_DOWN_CTRL,
-                                    val | AD1845_FREQ_SEL_ENABLE);
-                        spin_unlock_irqrestore(&chip->reg_lock, flags);
                 }
 
                 err = snd_wss_pcm(chip, 0, &pcm);
@@ -1113,11 +1016,13 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
                                             "for AD1845 chip\n");
                         goto _error;
                 }
-                err = snd_wss_timer(chip, 0, NULL);
-                if (err < 0) {
-                        snd_printk(KERN_ERR "sscape: No timer device "
-                                            "for AD1845 chip\n");
-                        goto _error;
+                if (chip->hardware != WSS_HW_AD1848) {
+                        err = snd_wss_timer(chip, 0, NULL);
+                        if (err < 0) {
+                                snd_printk(KERN_ERR "sscape: No timer device "
+                                                    "for AD1845 chip\n");
+                                goto _error;
+                        }
                 }
 
                 if (sscape->type != SSCAPE_VIVO) {
@@ -1128,8 +1033,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
                                                     "MIDI mixer control\n");
                                 goto _error;
                         }
-                        chip->set_playback_format = ad1845_playback_format;
-                        chip->set_capture_format = ad1845_capture_format;
                 }
 
                 strcpy(card->driver, "SoundScape");
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 3d6c5f2838af..13299aebd077 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -646,6 +646,24 @@ static void snd_wss_playback_format(struct snd_wss *chip,
                         full_calib = 0;
                 }
                 spin_unlock_irqrestore(&chip->reg_lock, flags);
+        } else if (chip->hardware == WSS_HW_AD1845) {
+                unsigned rate = params_rate(params);
+
+                /*
+                 * Program the AD1845 correctly for the playback stream.
+                 * Note that we do NOT need to toggle the MCE bit because
+                 * the PLAYBACK_ENABLE bit of the Interface Configuration
+                 * register is set.
+                 *
+                 * NOTE: We seem to need to write to the MSB before the LSB
+                 *       to get the correct sample frequency.
+                 */
+                spin_lock_irqsave(&chip->reg_lock, flags);
+                snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (pdfr & 0xf0));
+                snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff);
+                snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff);
+                full_calib = 0;
+                spin_unlock_irqrestore(&chip->reg_lock, flags);
         }
         if (full_calib) {
                 snd_wss_mce_up(chip);
@@ -690,6 +708,24 @@ static void snd_wss_capture_format(struct snd_wss *chip,
                         full_calib = 0;
                 }
                 spin_unlock_irqrestore(&chip->reg_lock, flags);
+        } else if (chip->hardware == WSS_HW_AD1845) {
+                unsigned rate = params_rate(params);
+
+                /*
+                 * Program the AD1845 correctly for the capture stream.
+                 * Note that we do NOT need to toggle the MCE bit because
+                 * the PLAYBACK_ENABLE bit of the Interface Configuration
+                 * register is set.
+                 *
+                 * NOTE: We seem to need to write to the MSB before the LSB
+                 *       to get the correct sample frequency.
+                 */
+                spin_lock_irqsave(&chip->reg_lock, flags);
+                snd_wss_out(chip, CS4231_REC_FORMAT, (cdfr & 0xf0));
+                snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff);
+                snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff);
+                full_calib = 0;
+                spin_unlock_irqrestore(&chip->reg_lock, flags);
         }
         if (full_calib) {
                 snd_wss_mce_up(chip);
@@ -1314,6 +1350,10 @@ static int snd_wss_probe(struct snd_wss *chip)
                 chip->image[CS4231_ALT_FEATURE_2] =
                         chip->hardware == WSS_HW_INTERWAVE ? 0xc2 : 0x01;
         }
+        /* enable fine grained frequency selection */
+        if (chip->hardware == WSS_HW_AD1845)
+                chip->image[AD1845_PWR_DOWN] = 8;
+
         ptr = (unsigned char *) &chip->image;
         regnum = (chip->hardware & WSS_HW_AD1848_MASK) ? 16 : 32;
         snd_wss_mce_down(chip);