aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-at91/Kconfig.non_dt12
-rw-r--r--arch/arm/mach-at91/Makefile2
-rw-r--r--arch/arm/mach-at91/board-foxg20.c272
-rw-r--r--arch/arm/mach-at91/board-rsi-ews.c232
4 files changed, 0 insertions, 518 deletions
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 44ace320d2e1..aa31e556e2e5 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -132,12 +132,6 @@ config MACH_ECO920
132 bool "eco920" 132 bool "eco920"
133 help 133 help
134 Select this if you are using the eco920 board 134 Select this if you are using the eco920 board
135
136config MACH_RSI_EWS
137 bool "RSI Embedded Webserver"
138 depends on ARCH_AT91RM9200
139 help
140 Select this if you are using RSIs EWS board.
141endif 135endif
142 136
143# ---------------------------------------------------------- 137# ----------------------------------------------------------
@@ -212,12 +206,6 @@ config MACH_CPU9G20
212 Select this if you are using a Eukrea Electromatique's 206 Select this if you are using a Eukrea Electromatique's
213 CPU9G20 Board <http://www.eukrea.com/> 207 CPU9G20 Board <http://www.eukrea.com/>
214 208
215config MACH_ACMENETUSFOXG20
216 bool "Acme Systems srl FOX Board G20"
217 help
218 Select this if you are using Acme Systems
219 FOX Board G20 <http://www.acmesystems.it>
220
221config MACH_PORTUXG20 209config MACH_PORTUXG20
222 bool "taskit PortuxG20" 210 bool "taskit PortuxG20"
223 help 211 help
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 78e9cec282f4..c677f9688ffe 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -46,7 +46,6 @@ obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
46obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o 46obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
47obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o 47obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
48obj-$(CONFIG_MACH_ECO920) += board-eco920.o 48obj-$(CONFIG_MACH_ECO920) += board-eco920.o
49obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o
50 49
51# AT91SAM9260 board-specific support 50# AT91SAM9260 board-specific support
52obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o 51obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -69,7 +68,6 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
69# AT91SAM9G20 board-specific support 68# AT91SAM9G20 board-specific support
70obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o 69obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
71obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o 70obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
72obj-$(CONFIG_MACH_ACMENETUSFOXG20) += board-foxg20.o
73obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o 71obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
74obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o 72obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
75obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o 73obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
deleted file mode 100644
index 8b22c60bb238..000000000000
--- a/arch/arm/mach-at91/board-foxg20.c
+++ /dev/null
@@ -1,272 +0,0 @@
1/*
2 * Copyright (C) 2005 SAN People
3 * Copyright (C) 2008 Atmel
4 * Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com
5 * Copyright (C) 2010 Sergio Tanzilli - tanzilli@acmesystems.it
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27#include <linux/spi/spi.h>
28#include <linux/spi/at73c213.h>
29#include <linux/gpio.h>
30#include <linux/gpio_keys.h>
31#include <linux/input.h>
32#include <linux/clk.h>
33#include <linux/w1-gpio.h>
34
35#include <mach/hardware.h>
36#include <asm/setup.h>
37#include <asm/mach-types.h>
38#include <asm/irq.h>
39
40#include <asm/mach/arch.h>
41#include <asm/mach/map.h>
42#include <asm/mach/irq.h>
43
44#include <mach/at91sam9_smc.h>
45
46#include "at91_aic.h"
47#include "board.h"
48#include "sam9_smc.h"
49#include "generic.h"
50#include "gpio.h"
51
52/*
53 * The FOX Board G20 hardware comes as the "Netus G20" board with
54 * just the cpu, ram, dataflash and two header connectors.
55 * This is plugged into the FOX Board which provides the ethernet,
56 * usb, rtc, leds, switch, ...
57 *
58 * For more info visit: http://www.acmesystems.it/foxg20
59 */
60
61
62static void __init foxg20_init_early(void)
63{
64 /* Initialize processor: 18.432 MHz crystal */
65 at91_initialize(18432000);
66}
67
68/*
69 * USB Host port
70 */
71static struct at91_usbh_data __initdata foxg20_usbh_data = {
72 .ports = 2,
73 .vbus_pin = {-EINVAL, -EINVAL},
74 .overcurrent_pin= {-EINVAL, -EINVAL},
75};
76
77/*
78 * USB Device port
79 */
80static struct at91_udc_data __initdata foxg20_udc_data = {
81 .vbus_pin = AT91_PIN_PC6,
82 .pullup_pin = -EINVAL, /* pull-up driven by UDC */
83};
84
85
86/*
87 * SPI devices.
88 */
89static struct spi_board_info foxg20_spi_devices[] = {
90#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
91 {
92 .modalias = "mtd_dataflash",
93 .chip_select = 1,
94 .max_speed_hz = 15 * 1000 * 1000,
95 .bus_num = 0,
96 },
97#endif
98};
99
100
101/*
102 * MACB Ethernet device
103 */
104static struct macb_platform_data __initdata foxg20_macb_data = {
105 .phy_irq_pin = AT91_PIN_PA7,
106 .is_rmii = 1,
107};
108
109/*
110 * MCI (SD/MMC)
111 * det_pin, wp_pin and vcc_pin are not connected
112 */
113static struct mci_platform_data __initdata foxg20_mci0_data = {
114 .slot[1] = {
115 .bus_width = 4,
116 .detect_pin = -EINVAL,
117 .wp_pin = -EINVAL,
118 },
119};
120
121
122/*
123 * LEDs
124 */
125static struct gpio_led foxg20_leds[] = {
126 { /* user led, red */
127 .name = "user_led",
128 .gpio = AT91_PIN_PC7,
129 .active_low = 0,
130 .default_trigger = "heartbeat",
131 },
132};
133
134
135/*
136 * GPIO Buttons
137 */
138#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
139static struct gpio_keys_button foxg20_buttons[] = {
140 {
141 .gpio = AT91_PIN_PC4,
142 .code = BTN_1,
143 .desc = "Button 1",
144 .active_low = 1,
145 .wakeup = 1,
146 },
147};
148
149static struct gpio_keys_platform_data foxg20_button_data = {
150 .buttons = foxg20_buttons,
151 .nbuttons = ARRAY_SIZE(foxg20_buttons),
152};
153
154static struct platform_device foxg20_button_device = {
155 .name = "gpio-keys",
156 .id = -1,
157 .num_resources = 0,
158 .dev = {
159 .platform_data = &foxg20_button_data,
160 }
161};
162
163static void __init foxg20_add_device_buttons(void)
164{
165 at91_set_gpio_input(AT91_PIN_PC4, 1); /* btn1 */
166 at91_set_deglitch(AT91_PIN_PC4, 1);
167
168 platform_device_register(&foxg20_button_device);
169}
170#else
171static void __init foxg20_add_device_buttons(void) {}
172#endif
173
174
175#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
176static struct w1_gpio_platform_data w1_gpio_pdata = {
177 /* If you choose to use a pin other than PB16 it needs to be 3.3V */
178 .pin = AT91_PIN_PB16,
179 .is_open_drain = 1,
180 .ext_pullup_enable_pin = -EINVAL,
181};
182
183static struct platform_device w1_device = {
184 .name = "w1-gpio",
185 .id = -1,
186 .dev.platform_data = &w1_gpio_pdata,
187};
188
189static void __init at91_add_device_w1(void)
190{
191 at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
192 at91_set_multi_drive(w1_gpio_pdata.pin, 1);
193 platform_device_register(&w1_device);
194}
195
196#endif
197
198
199static struct i2c_board_info __initdata foxg20_i2c_devices[] = {
200 {
201 I2C_BOARD_INFO("24c512", 0x50),
202 },
203};
204
205
206static void __init foxg20_board_init(void)
207{
208 /* Serial */
209 /* DBGU on ttyS0. (Rx & Tx only) */
210 at91_register_uart(0, 0, 0);
211
212 /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
213 at91_register_uart(AT91SAM9260_ID_US0, 1,
214 ATMEL_UART_CTS
215 | ATMEL_UART_RTS
216 | ATMEL_UART_DTR
217 | ATMEL_UART_DSR
218 | ATMEL_UART_DCD
219 | ATMEL_UART_RI);
220
221 /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
222 at91_register_uart(AT91SAM9260_ID_US1, 2,
223 ATMEL_UART_CTS
224 | ATMEL_UART_RTS);
225
226 /* USART2 on ttyS3. (Rx & Tx only) */
227 at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
228
229 /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
230 at91_register_uart(AT91SAM9260_ID_US3, 4,
231 ATMEL_UART_CTS
232 | ATMEL_UART_RTS);
233
234 /* USART4 on ttyS5. (Rx & Tx only) */
235 at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
236
237 /* USART5 on ttyS6. (Rx & Tx only) */
238 at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
239
240 /* Set the internal pull-up resistor on DRXD */
241 at91_set_A_periph(AT91_PIN_PB14, 1);
242 at91_add_device_serial();
243 /* USB Host */
244 at91_add_device_usbh(&foxg20_usbh_data);
245 /* USB Device */
246 at91_add_device_udc(&foxg20_udc_data);
247 /* SPI */
248 at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices));
249 /* Ethernet */
250 at91_add_device_eth(&foxg20_macb_data);
251 /* MMC */
252 at91_add_device_mci(0, &foxg20_mci0_data);
253 /* I2C */
254 at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
255 /* LEDs */
256 at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds));
257 /* Push Buttons */
258 foxg20_add_device_buttons();
259#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
260 at91_add_device_w1();
261#endif
262}
263
264MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
265 /* Maintainer: Sergio Tanzilli */
266 .init_time = at91sam926x_pit_init,
267 .map_io = at91_map_io,
268 .handle_irq = at91_aic_handle_irq,
269 .init_early = foxg20_init_early,
270 .init_irq = at91_init_irq_default,
271 .init_machine = foxg20_board_init,
272MACHINE_END
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
deleted file mode 100644
index f28e8b74df4b..000000000000
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ /dev/null
@@ -1,232 +0,0 @@
1/*
2 * board-rsi-ews.c
3 *
4 * Copyright (C)
5 * 2005 SAN People,
6 * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
7 *
8 * Licensed under GPLv2 or later.
9 */
10
11#include <linux/types.h>
12#include <linux/init.h>
13#include <linux/mm.h>
14#include <linux/module.h>
15#include <linux/platform_device.h>
16#include <linux/spi/spi.h>
17#include <linux/mtd/physmap.h>
18
19#include <asm/setup.h>
20#include <asm/mach-types.h>
21#include <asm/irq.h>
22
23#include <asm/mach/arch.h>
24#include <asm/mach/map.h>
25#include <asm/mach/irq.h>
26
27#include <mach/hardware.h>
28
29#include <linux/gpio.h>
30
31#include "at91_aic.h"
32#include "board.h"
33#include "generic.h"
34#include "gpio.h"
35
36static void __init rsi_ews_init_early(void)
37{
38 /* Initialize processor: 18.432 MHz crystal */
39 at91_initialize(18432000);
40}
41
42/*
43 * Ethernet
44 */
45static struct macb_platform_data rsi_ews_eth_data __initdata = {
46 .phy_irq_pin = AT91_PIN_PC4,
47 .is_rmii = 1,
48};
49
50/*
51 * USB Host
52 */
53static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
54 .ports = 1,
55 .vbus_pin = {-EINVAL, -EINVAL},
56 .overcurrent_pin= {-EINVAL, -EINVAL},
57};
58
59/*
60 * SD/MC
61 */
62static struct mci_platform_data __initdata rsi_ews_mci0_data = {
63 .slot[0] = {
64 .bus_width = 4,
65 .detect_pin = AT91_PIN_PB27,
66 .wp_pin = AT91_PIN_PB29,
67 },
68};
69
70/*
71 * I2C
72 */
73static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
74 {
75 I2C_BOARD_INFO("ds1337", 0x68),
76 },
77 {
78 I2C_BOARD_INFO("24c01", 0x50),
79 }
80};
81
82/*
83 * LEDs
84 */
85static struct gpio_led rsi_ews_leds[] = {
86 {
87 .name = "led0",
88 .gpio = AT91_PIN_PB6,
89 .active_low = 0,
90 },
91 {
92 .name = "led1",
93 .gpio = AT91_PIN_PB7,
94 .active_low = 0,
95 },
96 {
97 .name = "led2",
98 .gpio = AT91_PIN_PB8,
99 .active_low = 0,
100 },
101 {
102 .name = "led3",
103 .gpio = AT91_PIN_PB9,
104 .active_low = 0,
105 },
106};
107
108/*
109 * DataFlash
110 */
111static struct spi_board_info rsi_ews_spi_devices[] = {
112 { /* DataFlash chip 1*/
113 .modalias = "mtd_dataflash",
114 .chip_select = 0,
115 .max_speed_hz = 5 * 1000 * 1000,
116 },
117 { /* DataFlash chip 2*/
118 .modalias = "mtd_dataflash",
119 .chip_select = 1,
120 .max_speed_hz = 5 * 1000 * 1000,
121 },
122};
123
124/*
125 * NOR flash
126 */
127static struct mtd_partition rsiews_nor_partitions[] = {
128 {
129 .name = "boot",
130 .offset = 0,
131 .size = 3 * SZ_128K,
132 .mask_flags = MTD_WRITEABLE
133 },
134 {
135 .name = "kernel",
136 .offset = MTDPART_OFS_NXTBLK,
137 .size = SZ_2M - (3 * SZ_128K)
138 },
139 {
140 .name = "root",
141 .offset = MTDPART_OFS_NXTBLK,
142 .size = SZ_8M
143 },
144 {
145 .name = "kernelupd",
146 .offset = MTDPART_OFS_NXTBLK,
147 .size = 3 * SZ_512K,
148 .mask_flags = MTD_WRITEABLE
149 },
150 {
151 .name = "rootupd",
152 .offset = MTDPART_OFS_NXTBLK,
153 .size = 9 * SZ_512K,
154 .mask_flags = MTD_WRITEABLE
155 },
156};
157
158static struct physmap_flash_data rsiews_nor_data = {
159 .width = 2,
160 .parts = rsiews_nor_partitions,
161 .nr_parts = ARRAY_SIZE(rsiews_nor_partitions),
162};
163
164#define NOR_BASE AT91_CHIPSELECT_0
165#define NOR_SIZE SZ_16M
166
167static struct resource nor_flash_resources[] = {
168 {
169 .start = NOR_BASE,
170 .end = NOR_BASE + NOR_SIZE - 1,
171 .flags = IORESOURCE_MEM,
172 }
173};
174
175static struct platform_device rsiews_nor_flash = {
176 .name = "physmap-flash",
177 .id = 0,
178 .dev = {
179 .platform_data = &rsiews_nor_data,
180 },
181 .resource = nor_flash_resources,
182 .num_resources = ARRAY_SIZE(nor_flash_resources),
183};
184
185/*
186 * Init Func
187 */
188static void __init rsi_ews_board_init(void)
189{
190 /* Serial */
191 /* DBGU on ttyS0. (Rx & Tx only) */
192 /* This one is for debugging */
193 at91_register_uart(0, 0, 0);
194
195 /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
196 /* Dialin/-out modem interface */
197 at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
198 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
199 | ATMEL_UART_RI);
200
201 /* USART3 on ttyS4. (Rx, Tx, RTS) */
202 /* RS485 communication */
203 at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
204 at91_add_device_serial();
205 at91_set_gpio_output(AT91_PIN_PA21, 0);
206 /* Ethernet */
207 at91_add_device_eth(&rsi_ews_eth_data);
208 /* USB Host */
209 at91_add_device_usbh(&rsi_ews_usbh_data);
210 /* I2C */
211 at91_add_device_i2c(rsi_ews_i2c_devices,
212 ARRAY_SIZE(rsi_ews_i2c_devices));
213 /* SPI */
214 at91_add_device_spi(rsi_ews_spi_devices,
215 ARRAY_SIZE(rsi_ews_spi_devices));
216 /* MMC */
217 at91_add_device_mci(0, &rsi_ews_mci0_data);
218 /* NOR Flash */
219 platform_device_register(&rsiews_nor_flash);
220 /* LEDs */
221 at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
222}
223
224MACHINE_START(RSI_EWS, "RSI EWS")
225 /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
226 .init_time = at91rm9200_timer_init,
227 .map_io = at91_map_io,
228 .handle_irq = at91_aic_handle_irq,
229 .init_early = rsi_ews_init_early,
230 .init_irq = at91_init_irq_default,
231 .init_machine = rsi_ews_board_init,
232MACHINE_END
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-22 17:16:03 -0400