diff options
| -rw-r--r-- | arch/arm/boot/dts/exynos4210-universal_c210.dts | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts new file mode 100644 index 000000000000..345cdb51dcb7 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts | |||
| @@ -0,0 +1,352 @@ | |||
| 1 | /* | ||
| 2 | * Samsung's Exynos4210 based Universal C210 board device tree source | ||
| 3 | * | ||
| 4 | * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. | ||
| 5 | * http://www.samsung.com | ||
| 6 | * | ||
| 7 | * Device tree source file for Samsung's Universal C210 board which is based on | ||
| 8 | * Samsung's Exynos4210 rev0 SoC. | ||
| 9 | * | ||
| 10 | * This program is free software; you can redistribute it and/or modify | ||
| 11 | * it under the terms of the GNU General Public License version 2 as | ||
| 12 | * published by the Free Software Foundation. | ||
| 13 | */ | ||
| 14 | |||
| 15 | /dts-v1/; | ||
| 16 | /include/ "exynos4210.dtsi" | ||
| 17 | |||
| 18 | / { | ||
| 19 | model = "Samsung Universal C210 based on Exynos4210 rev0"; | ||
| 20 | compatible = "samsung,universal_c210", "samsung,exynos4210"; | ||
| 21 | |||
| 22 | memory { | ||
| 23 | reg = <0x40000000 0x10000000 | ||
| 24 | 0x50000000 0x10000000>; | ||
| 25 | }; | ||
| 26 | |||
| 27 | chosen { | ||
| 28 | bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; | ||
| 29 | }; | ||
| 30 | |||
| 31 | mct@10050000 { | ||
| 32 | compatible = "none"; | ||
| 33 | }; | ||
| 34 | |||
| 35 | fixed-rate-clocks { | ||
| 36 | xxti { | ||
| 37 | compatible = "samsung,clock-xxti"; | ||
| 38 | clock-frequency = <0>; | ||
| 39 | }; | ||
| 40 | |||
| 41 | xusbxti { | ||
| 42 | compatible = "samsung,clock-xusbxti"; | ||
| 43 | clock-frequency = <24000000>; | ||
| 44 | }; | ||
| 45 | }; | ||
| 46 | |||
| 47 | vemmc_reg: voltage-regulator { | ||
| 48 | compatible = "regulator-fixed"; | ||
| 49 | regulator-name = "VMEM_VDD_2_8V"; | ||
| 50 | regulator-min-microvolt = <2800000>; | ||
| 51 | regulator-max-microvolt = <2800000>; | ||
| 52 | gpio = <&gpe1 3 0>; | ||
| 53 | enable-active-high; | ||
| 54 | }; | ||
| 55 | |||
| 56 | sdhci_emmc: sdhci@12510000 { | ||
| 57 | bus-width = <8>; | ||
| 58 | non-removable; | ||
| 59 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; | ||
| 60 | pinctrl-names = "default"; | ||
| 61 | vmmc-supply = <&vemmc_reg>; | ||
| 62 | status = "okay"; | ||
| 63 | }; | ||
| 64 | |||
| 65 | serial@13800000 { | ||
| 66 | status = "okay"; | ||
| 67 | }; | ||
| 68 | |||
| 69 | serial@13810000 { | ||
| 70 | status = "okay"; | ||
| 71 | }; | ||
| 72 | |||
| 73 | serial@13820000 { | ||
| 74 | status = "okay"; | ||
| 75 | }; | ||
| 76 | |||
| 77 | serial@13830000 { | ||
| 78 | status = "okay"; | ||
| 79 | }; | ||
| 80 | |||
| 81 | gpio-keys { | ||
| 82 | compatible = "gpio-keys"; | ||
| 83 | |||
| 84 | vol-up-key { | ||
| 85 | gpios = <&gpx2 0 1>; | ||
| 86 | linux,code = <115>; | ||
| 87 | label = "volume up"; | ||
| 88 | debounce-interval = <1>; | ||
| 89 | }; | ||
| 90 | |||
| 91 | vol-down-key { | ||
| 92 | gpios = <&gpx2 1 1>; | ||
| 93 | linux,code = <114>; | ||
| 94 | label = "volume down"; | ||
| 95 | debounce-interval = <1>; | ||
| 96 | }; | ||
| 97 | |||
| 98 | config-key { | ||
| 99 | gpios = <&gpx2 2 1>; | ||
| 100 | linux,code = <171>; | ||
| 101 | label = "config"; | ||
| 102 | debounce-interval = <1>; | ||
| 103 | gpio-key,wakeup; | ||
| 104 | }; | ||
| 105 | |||
| 106 | camera-key { | ||
| 107 | gpios = <&gpx2 3 1>; | ||
| 108 | linux,code = <212>; | ||
| 109 | label = "camera"; | ||
| 110 | debounce-interval = <1>; | ||
| 111 | }; | ||
| 112 | |||
| 113 | power-key { | ||
| 114 | gpios = <&gpx2 7 1>; | ||
| 115 | linux,code = <116>; | ||
| 116 | label = "power"; | ||
| 117 | debounce-interval = <1>; | ||
| 118 | gpio-key,wakeup; | ||
| 119 | }; | ||
| 120 | |||
| 121 | ok-key { | ||
| 122 | gpios = <&gpx3 5 1>; | ||
| 123 | linux,code = <352>; | ||
| 124 | label = "ok"; | ||
| 125 | debounce-interval = <1>; | ||
| 126 | }; | ||
| 127 | }; | ||
| 128 | |||
| 129 | tsp_reg: voltage-regulator { | ||
| 130 | compatible = "regulator-fixed"; | ||
| 131 | regulator-name = "TSP_2_8V"; | ||
| 132 | regulator-min-microvolt = <2800000>; | ||
| 133 | regulator-max-microvolt = <2800000>; | ||
| 134 | gpio = <&gpe2 3 0>; | ||
| 135 | enable-active-high; | ||
| 136 | }; | ||
| 137 | |||
| 138 | i2c@13890000 { | ||
| 139 | samsung,i2c-sda-delay = <100>; | ||
| 140 | samsung,i2c-slave-addr = <0x10>; | ||
| 141 | samsung,i2c-max-bus-freq = <100000>; | ||
| 142 | pinctrl-0 = <&i2c3_bus>; | ||
| 143 | pinctrl-names = "default"; | ||
| 144 | status = "okay"; | ||
| 145 | |||
| 146 | tsp@4a { | ||
| 147 | /* TBD: Atmel maXtouch touchscreen */ | ||
| 148 | reg = <0x4a>; | ||
| 149 | }; | ||
| 150 | }; | ||
| 151 | |||
| 152 | i2c@138B0000 { | ||
| 153 | samsung,i2c-sda-delay = <100>; | ||
| 154 | samsung,i2c-slave-addr = <0x10>; | ||
| 155 | samsung,i2c-max-bus-freq = <100000>; | ||
| 156 | pinctrl-0 = <&i2c5_bus>; | ||
| 157 | pinctrl-names = "default"; | ||
| 158 | status = "okay"; | ||
| 159 | |||
| 160 | vdd_arm_reg: pmic@60 { | ||
| 161 | compatible = "maxim,max8952"; | ||
| 162 | reg = <0x60>; | ||
| 163 | |||
| 164 | max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; | ||
| 165 | max8952,default-mode = <0>; | ||
| 166 | max8952,dvs-mode-microvolt = <1250000>, <1200000>, | ||
| 167 | <1050000>, <950000>; | ||
| 168 | max8952,sync-freq = <0>; | ||
| 169 | max8952,ramp-speed = <0>; | ||
| 170 | |||
| 171 | regulator-name = "vdd_arm"; | ||
| 172 | regulator-min-microvolt = <770000>; | ||
| 173 | regulator-max-microvolt = <1400000>; | ||
| 174 | regulator-always-on; | ||
| 175 | regulator-boot-on; | ||
| 176 | }; | ||
| 177 | |||
| 178 | pmic@66 { | ||
| 179 | compatible = "national,lp3974"; | ||
| 180 | reg = <0x66>; | ||
| 181 | |||
| 182 | max8998,pmic-buck1-default-dvs-idx = <0>; | ||
| 183 | max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, | ||
| 184 | <&gpx0 6 0>; | ||
| 185 | max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, | ||
| 186 | <1100000>, <1000000>; | ||
| 187 | |||
| 188 | max8998,pmic-buck2-default-dvs-idx = <0>; | ||
| 189 | max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; | ||
| 190 | max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; | ||
| 191 | |||
| 192 | regulators { | ||
| 193 | ldo2_reg: LDO2 { | ||
| 194 | regulator-name = "VALIVE_1.2V"; | ||
| 195 | regulator-min-microvolt = <1200000>; | ||
| 196 | regulator-max-microvolt = <1200000>; | ||
| 197 | regulator-always-on; | ||
| 198 | }; | ||
| 199 | |||
| 200 | ldo3_reg: LDO3 { | ||
| 201 | regulator-name = "VUSB+MIPI_1.1V"; | ||
| 202 | regulator-min-microvolt = <1100000>; | ||
| 203 | regulator-max-microvolt = <1100000>; | ||
| 204 | }; | ||
| 205 | |||
| 206 | ldo4_reg: LDO4 { | ||
| 207 | regulator-name = "VADC_3.3V"; | ||
| 208 | regulator-min-microvolt = <3300000>; | ||
| 209 | regulator-max-microvolt = <3300000>; | ||
| 210 | }; | ||
| 211 | |||
| 212 | ldo5_reg: LDO5 { | ||
| 213 | regulator-name = "VTF_2.8V"; | ||
| 214 | regulator-min-microvolt = <2800000>; | ||
| 215 | regulator-max-microvolt = <2800000>; | ||
| 216 | }; | ||
| 217 | |||
| 218 | ldo6_reg: LDO6 { | ||
| 219 | regulator-name = "LDO6"; | ||
| 220 | regulator-min-microvolt = <2000000>; | ||
| 221 | regulator-max-microvolt = <2000000>; | ||
| 222 | }; | ||
| 223 | |||
| 224 | ldo7_reg: LDO7 { | ||
| 225 | regulator-name = "VLCD+VMIPI_1.8V"; | ||
| 226 | regulator-min-microvolt = <1800000>; | ||
| 227 | regulator-max-microvolt = <1800000>; | ||
| 228 | }; | ||
| 229 | |||
| 230 | ldo8_reg: LDO8 { | ||
| 231 | regulator-name = "VUSB+VDAC_3.3V"; | ||
| 232 | regulator-min-microvolt = <3300000>; | ||
| 233 | regulator-max-microvolt = <3300000>; | ||
| 234 | }; | ||
| 235 | |||
| 236 | ldo9_reg: LDO9 { | ||
| 237 | regulator-name = "VCC_2.8V"; | ||
| 238 | regulator-min-microvolt = <2800000>; | ||
| 239 | regulator-max-microvolt = <2800000>; | ||
| 240 | regulator-always-on; | ||
| 241 | }; | ||
| 242 | |||
| 243 | ldo10_reg: LDO10 { | ||
| 244 | regulator-name = "VPLL_1.1V"; | ||
| 245 | regulator-min-microvolt = <1100000>; | ||
| 246 | regulator-max-microvolt = <1100000>; | ||
| 247 | regulator-boot-on; | ||
| 248 | regulator-always-on; | ||
| 249 | }; | ||
| 250 | |||
| 251 | ldo11_reg: LDO11 { | ||
| 252 | regulator-name = "CAM_AF_3.3V"; | ||
| 253 | regulator-min-microvolt = <3300000>; | ||
| 254 | regulator-max-microvolt = <3300000>; | ||
| 255 | }; | ||
| 256 | |||
| 257 | ldo12_reg: LDO12 { | ||
| 258 | regulator-name = "PS_2.8V"; | ||
| 259 | regulator-min-microvolt = <2800000>; | ||
| 260 | regulator-max-microvolt = <2800000>; | ||
| 261 | }; | ||
| 262 | |||
| 263 | ldo13_reg: LDO13 { | ||
| 264 | regulator-name = "VHIC_1.2V"; | ||
| 265 | regulator-min-microvolt = <1200000>; | ||
| 266 | regulator-max-microvolt = <1200000>; | ||
| 267 | }; | ||
| 268 | |||
| 269 | ldo14_reg: LDO14 { | ||
| 270 | regulator-name = "CAM_I_HOST_1.8V"; | ||
| 271 | regulator-min-microvolt = <1800000>; | ||
| 272 | regulator-max-microvolt = <1800000>; | ||
| 273 | }; | ||
| 274 | |||
| 275 | ldo15_reg: LDO15 { | ||
| 276 | regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; | ||
| 277 | regulator-min-microvolt = <1200000>; | ||
| 278 | regulator-max-microvolt = <1200000>; | ||
| 279 | }; | ||
| 280 | |||
| 281 | ldo16_reg: LDO16 { | ||
| 282 | regulator-name = "CAM_S_ANA_2.8V"; | ||
| 283 | regulator-min-microvolt = <2800000>; | ||
| 284 | regulator-max-microvolt = <2800000>; | ||
| 285 | }; | ||
| 286 | |||
| 287 | ldo17_reg: LDO17 { | ||
| 288 | regulator-name = "VCC_3.0V_LCD"; | ||
| 289 | regulator-min-microvolt = <3000000>; | ||
| 290 | regulator-max-microvolt = <3000000>; | ||
| 291 | }; | ||
| 292 | |||
| 293 | buck1_reg: BUCK1 { | ||
| 294 | regulator-name = "VINT_1.1V"; | ||
| 295 | regulator-min-microvolt = <750000>; | ||
| 296 | regulator-max-microvolt = <1500000>; | ||
| 297 | regulator-boot-on; | ||
| 298 | regulator-always-on; | ||
| 299 | }; | ||
| 300 | |||
| 301 | buck2_reg: BUCK2 { | ||
| 302 | regulator-name = "VG3D_1.1V"; | ||
| 303 | regulator-min-microvolt = <750000>; | ||
| 304 | regulator-max-microvolt = <1500000>; | ||
| 305 | regulator-boot-on; | ||
| 306 | }; | ||
| 307 | |||
| 308 | buck3_reg: BUCK3 { | ||
| 309 | regulator-name = "VCC_1.8V"; | ||
| 310 | regulator-min-microvolt = <1800000>; | ||
| 311 | regulator-max-microvolt = <1800000>; | ||
| 312 | regulator-always-on; | ||
| 313 | }; | ||
| 314 | |||
| 315 | buck4_reg: BUCK4 { | ||
| 316 | regulator-name = "VMEM_1.2V"; | ||
| 317 | regulator-min-microvolt = <1200000>; | ||
| 318 | regulator-max-microvolt = <1200000>; | ||
| 319 | regulator-always-on; | ||
| 320 | }; | ||
| 321 | |||
| 322 | ap32khz_reg: EN32KHz-AP { | ||
| 323 | regulator-name = "32KHz AP"; | ||
| 324 | regulator-always-on; | ||
| 325 | }; | ||
| 326 | |||
| 327 | cp32khz_reg: EN32KHz-CP { | ||
| 328 | regulator-name = "32KHz CP"; | ||
| 329 | }; | ||
| 330 | |||
| 331 | vichg_reg: ENVICHG { | ||
| 332 | regulator-name = "VICHG"; | ||
| 333 | }; | ||
| 334 | |||
| 335 | safeout1_reg: ESAFEOUT1 { | ||
| 336 | regulator-name = "SAFEOUT1"; | ||
| 337 | regulator-always-on; | ||
| 338 | }; | ||
| 339 | |||
| 340 | safeout2_reg: ESAFEOUT2 { | ||
| 341 | regulator-name = "SAFEOUT2"; | ||
| 342 | regulator-boot-on; | ||
| 343 | }; | ||
| 344 | }; | ||
| 345 | }; | ||
| 346 | }; | ||
| 347 | |||
| 348 | pwm@139D0000 { | ||
| 349 | compatible = "samsung,s5p6440-pwm"; | ||
| 350 | status = "okay"; | ||
| 351 | }; | ||
| 352 | }; | ||
