diff options
-rw-r--r-- | MAINTAINERS | 8 | ||||
-rw-r--r-- | drivers/net/Kconfig | 1 | ||||
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/ibm_emac/Kconfig | 70 | ||||
-rw-r--r-- | drivers/net/ibm_emac/Makefile | 11 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac.h | 329 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_core.c | 2263 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_core.h | 222 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_debug.c | 211 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_debug.h | 62 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_mal.c | 570 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_mal.h | 267 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_phy.c | 398 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_phy.h | 80 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_rgmii.c | 200 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_rgmii.h | 64 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_tah.c | 110 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_tah.h | 87 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_zmii.c | 253 | ||||
-rw-r--r-- | drivers/net/ibm_emac/ibm_emac_zmii.h | 82 |
20 files changed, 0 insertions, 5289 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 195c56fc0db7..343f837f1dae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS | |||
@@ -3231,14 +3231,6 @@ L: linux-kernel@vger.kernel.org | |||
3231 | T: git git.infradead.org/battery-2.6.git | 3231 | T: git git.infradead.org/battery-2.6.git |
3232 | S: Maintained | 3232 | S: Maintained |
3233 | 3233 | ||
3234 | POWERPC 4xx EMAC DRIVER | ||
3235 | P: Eugene Surovegin | ||
3236 | M: ebs@ebshome.net | ||
3237 | W: http://kernel.ebshome.net/emac/ | ||
3238 | L: linuxppc-dev@ozlabs.org | ||
3239 | L: netdev@vger.kernel.org | ||
3240 | S: Maintained | ||
3241 | |||
3242 | PNP SUPPORT | 3234 | PNP SUPPORT |
3243 | P: Adam Belay | 3235 | P: Adam Belay |
3244 | M: ambx1@neo.rr.com | 3236 | M: ambx1@neo.rr.com |
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 20b5367f7e0b..0e0f6696ccac 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig | |||
@@ -1255,7 +1255,6 @@ config IBMVETH | |||
1255 | To compile this driver as a module, choose M here. The module will | 1255 | To compile this driver as a module, choose M here. The module will |
1256 | be called ibmveth. | 1256 | be called ibmveth. |
1257 | 1257 | ||
1258 | source "drivers/net/ibm_emac/Kconfig" | ||
1259 | source "drivers/net/ibm_newemac/Kconfig" | 1258 | source "drivers/net/ibm_newemac/Kconfig" |
1260 | 1259 | ||
1261 | config NET_PCI | 1260 | config NET_PCI |
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c96fe2036800..c9faa4605905 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile | |||
@@ -4,7 +4,6 @@ | |||
4 | 4 | ||
5 | obj-$(CONFIG_E1000) += e1000/ | 5 | obj-$(CONFIG_E1000) += e1000/ |
6 | obj-$(CONFIG_E1000E) += e1000e/ | 6 | obj-$(CONFIG_E1000E) += e1000e/ |
7 | obj-$(CONFIG_IBM_EMAC) += ibm_emac/ | ||
8 | obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ | 7 | obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ |
9 | obj-$(CONFIG_IGB) += igb/ | 8 | obj-$(CONFIG_IGB) += igb/ |
10 | obj-$(CONFIG_IXGBE) += ixgbe/ | 9 | obj-$(CONFIG_IXGBE) += ixgbe/ |
diff --git a/drivers/net/ibm_emac/Kconfig b/drivers/net/ibm_emac/Kconfig deleted file mode 100644 index f61c48047dc0..000000000000 --- a/drivers/net/ibm_emac/Kconfig +++ /dev/null | |||
@@ -1,70 +0,0 @@ | |||
1 | config IBM_EMAC | ||
2 | tristate "PowerPC 4xx on-chip Ethernet support" | ||
3 | depends on 4xx && !PPC_MERGE | ||
4 | help | ||
5 | This driver supports the PowerPC 4xx EMAC family of on-chip | ||
6 | Ethernet controllers. | ||
7 | |||
8 | config IBM_EMAC_RXB | ||
9 | int "Number of receive buffers" | ||
10 | depends on IBM_EMAC | ||
11 | default "128" | ||
12 | |||
13 | config IBM_EMAC_TXB | ||
14 | int "Number of transmit buffers" | ||
15 | depends on IBM_EMAC | ||
16 | default "64" | ||
17 | |||
18 | config IBM_EMAC_POLL_WEIGHT | ||
19 | int "MAL NAPI polling weight" | ||
20 | depends on IBM_EMAC | ||
21 | default "32" | ||
22 | |||
23 | config IBM_EMAC_RX_COPY_THRESHOLD | ||
24 | int "RX skb copy threshold (bytes)" | ||
25 | depends on IBM_EMAC | ||
26 | default "256" | ||
27 | |||
28 | config IBM_EMAC_RX_SKB_HEADROOM | ||
29 | int "Additional RX skb headroom (bytes)" | ||
30 | depends on IBM_EMAC | ||
31 | default "0" | ||
32 | help | ||
33 | Additional receive skb headroom. Note, that driver | ||
34 | will always reserve at least 2 bytes to make IP header | ||
35 | aligned, so usually there is no need to add any additional | ||
36 | headroom. | ||
37 | |||
38 | If unsure, set to 0. | ||
39 | |||
40 | config IBM_EMAC_PHY_RX_CLK_FIX | ||
41 | bool "PHY Rx clock workaround" | ||
42 | depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) | ||
43 | help | ||
44 | Enable this if EMAC attached to a PHY which doesn't generate | ||
45 | RX clock if there is no link, if this is the case, you will | ||
46 | see "TX disable timeout" or "RX disable timeout" in the system | ||
47 | log. | ||
48 | |||
49 | If unsure, say N. | ||
50 | |||
51 | config IBM_EMAC_DEBUG | ||
52 | bool "Debugging" | ||
53 | depends on IBM_EMAC | ||
54 | default n | ||
55 | |||
56 | config IBM_EMAC_ZMII | ||
57 | bool | ||
58 | depends on IBM_EMAC && (NP405H || NP405L || 44x) | ||
59 | default y | ||
60 | |||
61 | config IBM_EMAC_RGMII | ||
62 | bool | ||
63 | depends on IBM_EMAC && 440GX | ||
64 | default y | ||
65 | |||
66 | config IBM_EMAC_TAH | ||
67 | bool | ||
68 | depends on IBM_EMAC && 440GX | ||
69 | default y | ||
70 | |||
diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile deleted file mode 100644 index f98ddf0e807a..000000000000 --- a/drivers/net/ibm_emac/Makefile +++ /dev/null | |||
@@ -1,11 +0,0 @@ | |||
1 | # | ||
2 | # Makefile for the PowerPC 4xx on-chip ethernet driver | ||
3 | # | ||
4 | |||
5 | obj-$(CONFIG_IBM_EMAC) += ibm_emac.o | ||
6 | |||
7 | ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o | ||
8 | ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o | ||
9 | ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o | ||
10 | ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o | ||
11 | ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o | ||
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h deleted file mode 100644 index 97ed22bb4320..000000000000 --- a/drivers/net/ibm_emac/ibm_emac.h +++ /dev/null | |||
@@ -1,329 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac.h | ||
3 | * | ||
4 | * Register definitions for PowerPC 4xx on-chip ethernet contoller | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * Armin Kuster <akuster@mvista.com> | ||
12 | * Copyright 2002-2004 MontaVista Software Inc. | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify it | ||
15 | * under the terms of the GNU General Public License as published by the | ||
16 | * Free Software Foundation; either version 2 of the License, or (at your | ||
17 | * option) any later version. | ||
18 | * | ||
19 | */ | ||
20 | #ifndef __IBM_EMAC_H_ | ||
21 | #define __IBM_EMAC_H_ | ||
22 | |||
23 | #include <linux/types.h> | ||
24 | |||
25 | /* This is a simple check to prevent use of this driver on non-tested SoCs */ | ||
26 | #if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \ | ||
27 | !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \ | ||
28 | !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \ | ||
29 | !defined(CONFIG_440GR) | ||
30 | #error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK" | ||
31 | #endif | ||
32 | |||
33 | /* EMAC registers Write Access rules */ | ||
34 | struct emac_regs { | ||
35 | u32 mr0; /* special */ | ||
36 | u32 mr1; /* Reset */ | ||
37 | u32 tmr0; /* special */ | ||
38 | u32 tmr1; /* special */ | ||
39 | u32 rmr; /* Reset */ | ||
40 | u32 isr; /* Always */ | ||
41 | u32 iser; /* Reset */ | ||
42 | u32 iahr; /* Reset, R, T */ | ||
43 | u32 ialr; /* Reset, R, T */ | ||
44 | u32 vtpid; /* Reset, R, T */ | ||
45 | u32 vtci; /* Reset, R, T */ | ||
46 | u32 ptr; /* Reset, T */ | ||
47 | u32 iaht1; /* Reset, R */ | ||
48 | u32 iaht2; /* Reset, R */ | ||
49 | u32 iaht3; /* Reset, R */ | ||
50 | u32 iaht4; /* Reset, R */ | ||
51 | u32 gaht1; /* Reset, R */ | ||
52 | u32 gaht2; /* Reset, R */ | ||
53 | u32 gaht3; /* Reset, R */ | ||
54 | u32 gaht4; /* Reset, R */ | ||
55 | u32 lsah; | ||
56 | u32 lsal; | ||
57 | u32 ipgvr; /* Reset, T */ | ||
58 | u32 stacr; /* special */ | ||
59 | u32 trtr; /* special */ | ||
60 | u32 rwmr; /* Reset */ | ||
61 | u32 octx; | ||
62 | u32 ocrx; | ||
63 | u32 ipcr; | ||
64 | }; | ||
65 | |||
66 | #if !defined(CONFIG_IBM_EMAC4) | ||
67 | #define EMAC_ETHTOOL_REGS_VER 0 | ||
68 | #define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32)) | ||
69 | #else | ||
70 | #define EMAC_ETHTOOL_REGS_VER 1 | ||
71 | #define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs) | ||
72 | #endif | ||
73 | |||
74 | /* EMACx_MR0 */ | ||
75 | #define EMAC_MR0_RXI 0x80000000 | ||
76 | #define EMAC_MR0_TXI 0x40000000 | ||
77 | #define EMAC_MR0_SRST 0x20000000 | ||
78 | #define EMAC_MR0_TXE 0x10000000 | ||
79 | #define EMAC_MR0_RXE 0x08000000 | ||
80 | #define EMAC_MR0_WKE 0x04000000 | ||
81 | |||
82 | /* EMACx_MR1 */ | ||
83 | #define EMAC_MR1_FDE 0x80000000 | ||
84 | #define EMAC_MR1_ILE 0x40000000 | ||
85 | #define EMAC_MR1_VLE 0x20000000 | ||
86 | #define EMAC_MR1_EIFC 0x10000000 | ||
87 | #define EMAC_MR1_APP 0x08000000 | ||
88 | #define EMAC_MR1_IST 0x01000000 | ||
89 | |||
90 | #define EMAC_MR1_MF_MASK 0x00c00000 | ||
91 | #define EMAC_MR1_MF_10 0x00000000 | ||
92 | #define EMAC_MR1_MF_100 0x00400000 | ||
93 | #if !defined(CONFIG_IBM_EMAC4) | ||
94 | #define EMAC_MR1_MF_1000 0x00000000 | ||
95 | #define EMAC_MR1_MF_1000GPCS 0x00000000 | ||
96 | #define EMAC_MR1_MF_IPPA(id) 0x00000000 | ||
97 | #else | ||
98 | #define EMAC_MR1_MF_1000 0x00800000 | ||
99 | #define EMAC_MR1_MF_1000GPCS 0x00c00000 | ||
100 | #define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6) | ||
101 | #endif | ||
102 | |||
103 | #define EMAC_TX_FIFO_SIZE 2048 | ||
104 | |||
105 | #if !defined(CONFIG_IBM_EMAC4) | ||
106 | #define EMAC_MR1_RFS_4K 0x00300000 | ||
107 | #define EMAC_MR1_RFS_16K 0x00000000 | ||
108 | #define EMAC_RX_FIFO_SIZE(gige) 4096 | ||
109 | #define EMAC_MR1_TFS_2K 0x00080000 | ||
110 | #define EMAC_MR1_TR0_MULT 0x00008000 | ||
111 | #define EMAC_MR1_JPSM 0x00000000 | ||
112 | #define EMAC_MR1_MWSW_001 0x00000000 | ||
113 | #define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT) | ||
114 | #else | ||
115 | #define EMAC_MR1_RFS_4K 0x00180000 | ||
116 | #define EMAC_MR1_RFS_16K 0x00280000 | ||
117 | #define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096) | ||
118 | #define EMAC_MR1_TFS_2K 0x00020000 | ||
119 | #define EMAC_MR1_TR 0x00008000 | ||
120 | #define EMAC_MR1_MWSW_001 0x00001000 | ||
121 | #define EMAC_MR1_JPSM 0x00000800 | ||
122 | #define EMAC_MR1_OBCI_MASK 0x00000038 | ||
123 | #define EMAC_MR1_OBCI_50 0x00000000 | ||
124 | #define EMAC_MR1_OBCI_66 0x00000008 | ||
125 | #define EMAC_MR1_OBCI_83 0x00000010 | ||
126 | #define EMAC_MR1_OBCI_100 0x00000018 | ||
127 | #define EMAC_MR1_OBCI_100P 0x00000020 | ||
128 | #define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \ | ||
129 | (freq) <= 66 ? EMAC_MR1_OBCI_66 : \ | ||
130 | (freq) <= 83 ? EMAC_MR1_OBCI_83 : \ | ||
131 | (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P) | ||
132 | #define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \ | ||
133 | EMAC_MR1_OBCI(opb)) | ||
134 | #endif | ||
135 | |||
136 | /* EMACx_TMR0 */ | ||
137 | #define EMAC_TMR0_GNP 0x80000000 | ||
138 | #if !defined(CONFIG_IBM_EMAC4) | ||
139 | #define EMAC_TMR0_DEFAULT 0x00000000 | ||
140 | #else | ||
141 | #define EMAC_TMR0_TFAE_2_32 0x00000001 | ||
142 | #define EMAC_TMR0_TFAE_4_64 0x00000002 | ||
143 | #define EMAC_TMR0_TFAE_8_128 0x00000003 | ||
144 | #define EMAC_TMR0_TFAE_16_256 0x00000004 | ||
145 | #define EMAC_TMR0_TFAE_32_512 0x00000005 | ||
146 | #define EMAC_TMR0_TFAE_64_1024 0x00000006 | ||
147 | #define EMAC_TMR0_TFAE_128_2048 0x00000007 | ||
148 | #define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32 | ||
149 | #endif | ||
150 | #define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT) | ||
151 | |||
152 | /* EMACx_TMR1 */ | ||
153 | |||
154 | /* IBM manuals are not very clear here. | ||
155 | * This is my interpretation of how things are. --ebs | ||
156 | */ | ||
157 | #if defined(CONFIG_40x) | ||
158 | #define EMAC_FIFO_ENTRY_SIZE 8 | ||
159 | #define EMAC_MAL_BURST_SIZE (16 * 4) | ||
160 | #else | ||
161 | #define EMAC_FIFO_ENTRY_SIZE 16 | ||
162 | #define EMAC_MAL_BURST_SIZE (64 * 4) | ||
163 | #endif | ||
164 | |||
165 | #if !defined(CONFIG_IBM_EMAC4) | ||
166 | #define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16)) | ||
167 | #else | ||
168 | #define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14)) | ||
169 | #endif | ||
170 | |||
171 | /* EMACx_RMR */ | ||
172 | #define EMAC_RMR_SP 0x80000000 | ||
173 | #define EMAC_RMR_SFCS 0x40000000 | ||
174 | #define EMAC_RMR_RRP 0x20000000 | ||
175 | #define EMAC_RMR_RFP 0x10000000 | ||
176 | #define EMAC_RMR_ROP 0x08000000 | ||
177 | #define EMAC_RMR_RPIR 0x04000000 | ||
178 | #define EMAC_RMR_PPP 0x02000000 | ||
179 | #define EMAC_RMR_PME 0x01000000 | ||
180 | #define EMAC_RMR_PMME 0x00800000 | ||
181 | #define EMAC_RMR_IAE 0x00400000 | ||
182 | #define EMAC_RMR_MIAE 0x00200000 | ||
183 | #define EMAC_RMR_BAE 0x00100000 | ||
184 | #define EMAC_RMR_MAE 0x00080000 | ||
185 | #if !defined(CONFIG_IBM_EMAC4) | ||
186 | #define EMAC_RMR_BASE 0x00000000 | ||
187 | #else | ||
188 | #define EMAC_RMR_RFAF_2_32 0x00000001 | ||
189 | #define EMAC_RMR_RFAF_4_64 0x00000002 | ||
190 | #define EMAC_RMR_RFAF_8_128 0x00000003 | ||
191 | #define EMAC_RMR_RFAF_16_256 0x00000004 | ||
192 | #define EMAC_RMR_RFAF_32_512 0x00000005 | ||
193 | #define EMAC_RMR_RFAF_64_1024 0x00000006 | ||
194 | #define EMAC_RMR_RFAF_128_2048 0x00000007 | ||
195 | #define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048 | ||
196 | #endif | ||
197 | |||
198 | /* EMACx_ISR & EMACx_ISER */ | ||
199 | #if !defined(CONFIG_IBM_EMAC4) | ||
200 | #define EMAC_ISR_TXPE 0x00000000 | ||
201 | #define EMAC_ISR_RXPE 0x00000000 | ||
202 | #define EMAC_ISR_TXUE 0x00000000 | ||
203 | #define EMAC_ISR_RXOE 0x00000000 | ||
204 | #else | ||
205 | #define EMAC_ISR_TXPE 0x20000000 | ||
206 | #define EMAC_ISR_RXPE 0x10000000 | ||
207 | #define EMAC_ISR_TXUE 0x08000000 | ||
208 | #define EMAC_ISR_RXOE 0x04000000 | ||
209 | #endif | ||
210 | #define EMAC_ISR_OVR 0x02000000 | ||
211 | #define EMAC_ISR_PP 0x01000000 | ||
212 | #define EMAC_ISR_BP 0x00800000 | ||
213 | #define EMAC_ISR_RP 0x00400000 | ||
214 | #define EMAC_ISR_SE 0x00200000 | ||
215 | #define EMAC_ISR_ALE 0x00100000 | ||
216 | #define EMAC_ISR_BFCS 0x00080000 | ||
217 | #define EMAC_ISR_PTLE 0x00040000 | ||
218 | #define EMAC_ISR_ORE 0x00020000 | ||
219 | #define EMAC_ISR_IRE 0x00010000 | ||
220 | #define EMAC_ISR_SQE 0x00000080 | ||
221 | #define EMAC_ISR_TE 0x00000040 | ||
222 | #define EMAC_ISR_MOS 0x00000002 | ||
223 | #define EMAC_ISR_MOF 0x00000001 | ||
224 | |||
225 | /* EMACx_STACR */ | ||
226 | #define EMAC_STACR_PHYD_MASK 0xffff | ||
227 | #define EMAC_STACR_PHYD_SHIFT 16 | ||
228 | #define EMAC_STACR_OC 0x00008000 | ||
229 | #define EMAC_STACR_PHYE 0x00004000 | ||
230 | #define EMAC_STACR_STAC_MASK 0x00003000 | ||
231 | #define EMAC_STACR_STAC_READ 0x00001000 | ||
232 | #define EMAC_STACR_STAC_WRITE 0x00002000 | ||
233 | #if !defined(CONFIG_IBM_EMAC4) | ||
234 | #define EMAC_STACR_OPBC_MASK 0x00000C00 | ||
235 | #define EMAC_STACR_OPBC_50 0x00000000 | ||
236 | #define EMAC_STACR_OPBC_66 0x00000400 | ||
237 | #define EMAC_STACR_OPBC_83 0x00000800 | ||
238 | #define EMAC_STACR_OPBC_100 0x00000C00 | ||
239 | #define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \ | ||
240 | (freq) <= 66 ? EMAC_STACR_OPBC_66 : \ | ||
241 | (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100) | ||
242 | #define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb) | ||
243 | #else | ||
244 | #define EMAC_STACR_BASE(opb) 0x00000000 | ||
245 | #endif | ||
246 | #define EMAC_STACR_PCDA_MASK 0x1f | ||
247 | #define EMAC_STACR_PCDA_SHIFT 5 | ||
248 | #define EMAC_STACR_PRA_MASK 0x1f | ||
249 | |||
250 | /* | ||
251 | * For the 440SPe, AMCC inexplicably changed the polarity of | ||
252 | * the "operation complete" bit in the MII control register. | ||
253 | */ | ||
254 | #if defined(CONFIG_440SPE) | ||
255 | static inline int emac_phy_done(u32 stacr) | ||
256 | { | ||
257 | return !(stacr & EMAC_STACR_OC); | ||
258 | }; | ||
259 | #define EMAC_STACR_START EMAC_STACR_OC | ||
260 | |||
261 | #else /* CONFIG_440SPE */ | ||
262 | static inline int emac_phy_done(u32 stacr) | ||
263 | { | ||
264 | return stacr & EMAC_STACR_OC; | ||
265 | }; | ||
266 | #define EMAC_STACR_START 0 | ||
267 | #endif /* !CONFIG_440SPE */ | ||
268 | |||
269 | /* EMACx_TRTR */ | ||
270 | #if !defined(CONFIG_IBM_EMAC4) | ||
271 | #define EMAC_TRTR_SHIFT 27 | ||
272 | #else | ||
273 | #define EMAC_TRTR_SHIFT 24 | ||
274 | #endif | ||
275 | #define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT) | ||
276 | |||
277 | /* EMACx_RWMR */ | ||
278 | #if !defined(CONFIG_IBM_EMAC4) | ||
279 | #define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7)) | ||
280 | #else | ||
281 | #define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6)) | ||
282 | #endif | ||
283 | |||
284 | /* EMAC specific TX descriptor control fields (write access) */ | ||
285 | #define EMAC_TX_CTRL_GFCS 0x0200 | ||
286 | #define EMAC_TX_CTRL_GP 0x0100 | ||
287 | #define EMAC_TX_CTRL_ISA 0x0080 | ||
288 | #define EMAC_TX_CTRL_RSA 0x0040 | ||
289 | #define EMAC_TX_CTRL_IVT 0x0020 | ||
290 | #define EMAC_TX_CTRL_RVT 0x0010 | ||
291 | #define EMAC_TX_CTRL_TAH_CSUM 0x000e | ||
292 | |||
293 | /* EMAC specific TX descriptor status fields (read access) */ | ||
294 | #define EMAC_TX_ST_BFCS 0x0200 | ||
295 | #define EMAC_TX_ST_LCS 0x0080 | ||
296 | #define EMAC_TX_ST_ED 0x0040 | ||
297 | #define EMAC_TX_ST_EC 0x0020 | ||
298 | #define EMAC_TX_ST_LC 0x0010 | ||
299 | #define EMAC_TX_ST_MC 0x0008 | ||
300 | #define EMAC_TX_ST_SC 0x0004 | ||
301 | #define EMAC_TX_ST_UR 0x0002 | ||
302 | #define EMAC_TX_ST_SQE 0x0001 | ||
303 | #if !defined(CONFIG_IBM_EMAC_TAH) | ||
304 | #define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ | ||
305 | EMAC_TX_ST_EC | EMAC_TX_ST_LC | \ | ||
306 | EMAC_TX_ST_MC | EMAC_TX_ST_UR)) | ||
307 | #else | ||
308 | #define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ | ||
309 | EMAC_TX_ST_EC | EMAC_TX_ST_LC)) | ||
310 | #endif | ||
311 | |||
312 | /* EMAC specific RX descriptor status fields (read access) */ | ||
313 | #define EMAC_RX_ST_OE 0x0200 | ||
314 | #define EMAC_RX_ST_PP 0x0100 | ||
315 | #define EMAC_RX_ST_BP 0x0080 | ||
316 | #define EMAC_RX_ST_RP 0x0040 | ||
317 | #define EMAC_RX_ST_SE 0x0020 | ||
318 | #define EMAC_RX_ST_AE 0x0010 | ||
319 | #define EMAC_RX_ST_BFCS 0x0008 | ||
320 | #define EMAC_RX_ST_PTL 0x0004 | ||
321 | #define EMAC_RX_ST_ORE 0x0002 | ||
322 | #define EMAC_RX_ST_IRE 0x0001 | ||
323 | #define EMAC_RX_TAH_BAD_CSUM 0x0003 | ||
324 | #define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \ | ||
325 | EMAC_RX_ST_RP | EMAC_RX_ST_SE | \ | ||
326 | EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \ | ||
327 | EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \ | ||
328 | EMAC_RX_ST_IRE ) | ||
329 | #endif /* __IBM_EMAC_H_ */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c deleted file mode 100644 index 73664f226f32..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ /dev/null | |||
@@ -1,2263 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_core.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> | ||
12 | * Armin Kuster <akuster@mvista.com> | ||
13 | * Johnnie Peters <jpeters@mvista.com> | ||
14 | * | ||
15 | * This program is free software; you can redistribute it and/or modify it | ||
16 | * under the terms of the GNU General Public License as published by the | ||
17 | * Free Software Foundation; either version 2 of the License, or (at your | ||
18 | * option) any later version. | ||
19 | * | ||
20 | */ | ||
21 | |||
22 | #include <linux/module.h> | ||
23 | #include <linux/kernel.h> | ||
24 | #include <linux/string.h> | ||
25 | #include <linux/errno.h> | ||
26 | #include <linux/interrupt.h> | ||
27 | #include <linux/delay.h> | ||
28 | #include <linux/init.h> | ||
29 | #include <linux/types.h> | ||
30 | #include <linux/netdevice.h> | ||
31 | #include <linux/etherdevice.h> | ||
32 | #include <linux/skbuff.h> | ||
33 | #include <linux/crc32.h> | ||
34 | #include <linux/ethtool.h> | ||
35 | #include <linux/mii.h> | ||
36 | #include <linux/bitops.h> | ||
37 | |||
38 | #include <asm/processor.h> | ||
39 | #include <asm/io.h> | ||
40 | #include <asm/dma.h> | ||
41 | #include <asm/uaccess.h> | ||
42 | #include <asm/ocp.h> | ||
43 | |||
44 | #include "ibm_emac_core.h" | ||
45 | #include "ibm_emac_debug.h" | ||
46 | |||
47 | /* | ||
48 | * Lack of dma_unmap_???? calls is intentional. | ||
49 | * | ||
50 | * API-correct usage requires additional support state information to be | ||
51 | * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to | ||
52 | * EMAC design (e.g. TX buffer passed from network stack can be split into | ||
53 | * several BDs, dma_map_single/dma_map_page can be used to map particular BD), | ||
54 | * maintaining such information will add additional overhead. | ||
55 | * Current DMA API implementation for 4xx processors only ensures cache coherency | ||
56 | * and dma_unmap_???? routines are empty and are likely to stay this way. | ||
57 | * I decided to omit dma_unmap_??? calls because I don't want to add additional | ||
58 | * complexity just for the sake of following some abstract API, when it doesn't | ||
59 | * add any real benefit to the driver. I understand that this decision maybe | ||
60 | * controversial, but I really tried to make code API-correct and efficient | ||
61 | * at the same time and didn't come up with code I liked :(. --ebs | ||
62 | */ | ||
63 | |||
64 | #define DRV_NAME "emac" | ||
65 | #define DRV_VERSION "3.54" | ||
66 | #define DRV_DESC "PPC 4xx OCP EMAC driver" | ||
67 | |||
68 | MODULE_DESCRIPTION(DRV_DESC); | ||
69 | MODULE_AUTHOR | ||
70 | ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>"); | ||
71 | MODULE_LICENSE("GPL"); | ||
72 | |||
73 | /* minimum number of free TX descriptors required to wake up TX process */ | ||
74 | #define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) | ||
75 | |||
76 | /* If packet size is less than this number, we allocate small skb and copy packet | ||
77 | * contents into it instead of just sending original big skb up | ||
78 | */ | ||
79 | #define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD | ||
80 | |||
81 | /* Since multiple EMACs share MDIO lines in various ways, we need | ||
82 | * to avoid re-using the same PHY ID in cases where the arch didn't | ||
83 | * setup precise phy_map entries | ||
84 | */ | ||
85 | static u32 busy_phy_map; | ||
86 | |||
87 | #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \ | ||
88 | (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)) | ||
89 | /* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us | ||
90 | * with PHY RX clock problem. | ||
91 | * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which | ||
92 | * also allows controlling each EMAC clock | ||
93 | */ | ||
94 | static inline void EMAC_RX_CLK_TX(int idx) | ||
95 | { | ||
96 | unsigned long flags; | ||
97 | local_irq_save(flags); | ||
98 | |||
99 | #if defined(CONFIG_405EP) | ||
100 | mtdcr(0xf3, mfdcr(0xf3) | (1 << idx)); | ||
101 | #else /* CONFIG_440EP || CONFIG_440GR */ | ||
102 | SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx)); | ||
103 | #endif | ||
104 | |||
105 | local_irq_restore(flags); | ||
106 | } | ||
107 | |||
108 | static inline void EMAC_RX_CLK_DEFAULT(int idx) | ||
109 | { | ||
110 | unsigned long flags; | ||
111 | local_irq_save(flags); | ||
112 | |||
113 | #if defined(CONFIG_405EP) | ||
114 | mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx)); | ||
115 | #else /* CONFIG_440EP */ | ||
116 | SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx)); | ||
117 | #endif | ||
118 | |||
119 | local_irq_restore(flags); | ||
120 | } | ||
121 | #else | ||
122 | #define EMAC_RX_CLK_TX(idx) ((void)0) | ||
123 | #define EMAC_RX_CLK_DEFAULT(idx) ((void)0) | ||
124 | #endif | ||
125 | |||
126 | #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX) | ||
127 | /* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS], | ||
128 | * unfortunately this is less flexible than 440EP case, because it's a global | ||
129 | * setting for all EMACs, therefore we do this clock trick only during probe. | ||
130 | */ | ||
131 | #define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \ | ||
132 | SDR_READ(DCRN_SDR_MFR) | 0x08000000) | ||
133 | #define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \ | ||
134 | SDR_READ(DCRN_SDR_MFR) & ~0x08000000) | ||
135 | #else | ||
136 | #define EMAC_CLK_INTERNAL ((void)0) | ||
137 | #define EMAC_CLK_EXTERNAL ((void)0) | ||
138 | #endif | ||
139 | |||
140 | /* I don't want to litter system log with timeout errors | ||
141 | * when we have brain-damaged PHY. | ||
142 | */ | ||
143 | static inline void emac_report_timeout_error(struct ocp_enet_private *dev, | ||
144 | const char *error) | ||
145 | { | ||
146 | #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) | ||
147 | DBG("%d: %s" NL, dev->def->index, error); | ||
148 | #else | ||
149 | if (net_ratelimit()) | ||
150 | printk(KERN_ERR "emac%d: %s\n", dev->def->index, error); | ||
151 | #endif | ||
152 | } | ||
153 | |||
154 | /* PHY polling intervals */ | ||
155 | #define PHY_POLL_LINK_ON HZ | ||
156 | #define PHY_POLL_LINK_OFF (HZ / 5) | ||
157 | |||
158 | /* Graceful stop timeouts in us. | ||
159 | * We should allow up to 1 frame time (full-duplex, ignoring collisions) | ||
160 | */ | ||
161 | #define STOP_TIMEOUT_10 1230 | ||
162 | #define STOP_TIMEOUT_100 124 | ||
163 | #define STOP_TIMEOUT_1000 13 | ||
164 | #define STOP_TIMEOUT_1000_JUMBO 73 | ||
165 | |||
166 | /* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ | ||
167 | static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { | ||
168 | "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", | ||
169 | "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", | ||
170 | "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", | ||
171 | "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", | ||
172 | "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", | ||
173 | "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", | ||
174 | "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", | ||
175 | "rx_bad_packet", "rx_runt_packet", "rx_short_event", | ||
176 | "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", | ||
177 | "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", | ||
178 | "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", | ||
179 | "tx_bd_excessive_collisions", "tx_bd_late_collision", | ||
180 | "tx_bd_multple_collisions", "tx_bd_single_collision", | ||
181 | "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", | ||
182 | "tx_errors" | ||
183 | }; | ||
184 | |||
185 | static irqreturn_t emac_irq(int irq, void *dev_instance); | ||
186 | static void emac_clean_tx_ring(struct ocp_enet_private *dev); | ||
187 | |||
188 | static inline int emac_phy_supports_gige(int phy_mode) | ||
189 | { | ||
190 | return phy_mode == PHY_MODE_GMII || | ||
191 | phy_mode == PHY_MODE_RGMII || | ||
192 | phy_mode == PHY_MODE_TBI || | ||
193 | phy_mode == PHY_MODE_RTBI; | ||
194 | } | ||
195 | |||
196 | static inline int emac_phy_gpcs(int phy_mode) | ||
197 | { | ||
198 | return phy_mode == PHY_MODE_TBI || | ||
199 | phy_mode == PHY_MODE_RTBI; | ||
200 | } | ||
201 | |||
202 | static inline void emac_tx_enable(struct ocp_enet_private *dev) | ||
203 | { | ||
204 | struct emac_regs __iomem *p = dev->emacp; | ||
205 | unsigned long flags; | ||
206 | u32 r; | ||
207 | |||
208 | local_irq_save(flags); | ||
209 | |||
210 | DBG("%d: tx_enable" NL, dev->def->index); | ||
211 | |||
212 | r = in_be32(&p->mr0); | ||
213 | if (!(r & EMAC_MR0_TXE)) | ||
214 | out_be32(&p->mr0, r | EMAC_MR0_TXE); | ||
215 | local_irq_restore(flags); | ||
216 | } | ||
217 | |||
218 | static void emac_tx_disable(struct ocp_enet_private *dev) | ||
219 | { | ||
220 | struct emac_regs __iomem *p = dev->emacp; | ||
221 | unsigned long flags; | ||
222 | u32 r; | ||
223 | |||
224 | local_irq_save(flags); | ||
225 | |||
226 | DBG("%d: tx_disable" NL, dev->def->index); | ||
227 | |||
228 | r = in_be32(&p->mr0); | ||
229 | if (r & EMAC_MR0_TXE) { | ||
230 | int n = dev->stop_timeout; | ||
231 | out_be32(&p->mr0, r & ~EMAC_MR0_TXE); | ||
232 | while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) { | ||
233 | udelay(1); | ||
234 | --n; | ||
235 | } | ||
236 | if (unlikely(!n)) | ||
237 | emac_report_timeout_error(dev, "TX disable timeout"); | ||
238 | } | ||
239 | local_irq_restore(flags); | ||
240 | } | ||
241 | |||
242 | static void emac_rx_enable(struct ocp_enet_private *dev) | ||
243 | { | ||
244 | struct emac_regs __iomem *p = dev->emacp; | ||
245 | unsigned long flags; | ||
246 | u32 r; | ||
247 | |||
248 | local_irq_save(flags); | ||
249 | if (unlikely(dev->commac.rx_stopped)) | ||
250 | goto out; | ||
251 | |||
252 | DBG("%d: rx_enable" NL, dev->def->index); | ||
253 | |||
254 | r = in_be32(&p->mr0); | ||
255 | if (!(r & EMAC_MR0_RXE)) { | ||
256 | if (unlikely(!(r & EMAC_MR0_RXI))) { | ||
257 | /* Wait if previous async disable is still in progress */ | ||
258 | int n = dev->stop_timeout; | ||
259 | while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { | ||
260 | udelay(1); | ||
261 | --n; | ||
262 | } | ||
263 | if (unlikely(!n)) | ||
264 | emac_report_timeout_error(dev, | ||
265 | "RX disable timeout"); | ||
266 | } | ||
267 | out_be32(&p->mr0, r | EMAC_MR0_RXE); | ||
268 | } | ||
269 | out: | ||
270 | local_irq_restore(flags); | ||
271 | } | ||
272 | |||
273 | static void emac_rx_disable(struct ocp_enet_private *dev) | ||
274 | { | ||
275 | struct emac_regs __iomem *p = dev->emacp; | ||
276 | unsigned long flags; | ||
277 | u32 r; | ||
278 | |||
279 | local_irq_save(flags); | ||
280 | |||
281 | DBG("%d: rx_disable" NL, dev->def->index); | ||
282 | |||
283 | r = in_be32(&p->mr0); | ||
284 | if (r & EMAC_MR0_RXE) { | ||
285 | int n = dev->stop_timeout; | ||
286 | out_be32(&p->mr0, r & ~EMAC_MR0_RXE); | ||
287 | while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { | ||
288 | udelay(1); | ||
289 | --n; | ||
290 | } | ||
291 | if (unlikely(!n)) | ||
292 | emac_report_timeout_error(dev, "RX disable timeout"); | ||
293 | } | ||
294 | local_irq_restore(flags); | ||
295 | } | ||
296 | |||
297 | static inline void emac_rx_disable_async(struct ocp_enet_private *dev) | ||
298 | { | ||
299 | struct emac_regs __iomem *p = dev->emacp; | ||
300 | unsigned long flags; | ||
301 | u32 r; | ||
302 | |||
303 | local_irq_save(flags); | ||
304 | |||
305 | DBG("%d: rx_disable_async" NL, dev->def->index); | ||
306 | |||
307 | r = in_be32(&p->mr0); | ||
308 | if (r & EMAC_MR0_RXE) | ||
309 | out_be32(&p->mr0, r & ~EMAC_MR0_RXE); | ||
310 | local_irq_restore(flags); | ||
311 | } | ||
312 | |||
313 | static int emac_reset(struct ocp_enet_private *dev) | ||
314 | { | ||
315 | struct emac_regs __iomem *p = dev->emacp; | ||
316 | unsigned long flags; | ||
317 | int n = 20; | ||
318 | |||
319 | DBG("%d: reset" NL, dev->def->index); | ||
320 | |||
321 | local_irq_save(flags); | ||
322 | |||
323 | if (!dev->reset_failed) { | ||
324 | /* 40x erratum suggests stopping RX channel before reset, | ||
325 | * we stop TX as well | ||
326 | */ | ||
327 | emac_rx_disable(dev); | ||
328 | emac_tx_disable(dev); | ||
329 | } | ||
330 | |||
331 | out_be32(&p->mr0, EMAC_MR0_SRST); | ||
332 | while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) | ||
333 | --n; | ||
334 | local_irq_restore(flags); | ||
335 | |||
336 | if (n) { | ||
337 | dev->reset_failed = 0; | ||
338 | return 0; | ||
339 | } else { | ||
340 | emac_report_timeout_error(dev, "reset timeout"); | ||
341 | dev->reset_failed = 1; | ||
342 | return -ETIMEDOUT; | ||
343 | } | ||
344 | } | ||
345 | |||
346 | static void emac_hash_mc(struct ocp_enet_private *dev) | ||
347 | { | ||
348 | struct emac_regs __iomem *p = dev->emacp; | ||
349 | u16 gaht[4] = { 0 }; | ||
350 | struct dev_mc_list *dmi; | ||
351 | |||
352 | DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count); | ||
353 | |||
354 | for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { | ||
355 | int bit; | ||
356 | DECLARE_MAC_BUF(mac); | ||
357 | DBG2("%d: mc %s" NL, | ||
358 | dev->def->index, print_mac(mac, dmi->dmi_addr)); | ||
359 | |||
360 | bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26); | ||
361 | gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f); | ||
362 | } | ||
363 | out_be32(&p->gaht1, gaht[0]); | ||
364 | out_be32(&p->gaht2, gaht[1]); | ||
365 | out_be32(&p->gaht3, gaht[2]); | ||
366 | out_be32(&p->gaht4, gaht[3]); | ||
367 | } | ||
368 | |||
369 | static inline u32 emac_iff2rmr(struct net_device *ndev) | ||
370 | { | ||
371 | u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE | | ||
372 | EMAC_RMR_BASE; | ||
373 | |||
374 | if (ndev->flags & IFF_PROMISC) | ||
375 | r |= EMAC_RMR_PME; | ||
376 | else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32) | ||
377 | r |= EMAC_RMR_PMME; | ||
378 | else if (ndev->mc_count > 0) | ||
379 | r |= EMAC_RMR_MAE; | ||
380 | |||
381 | return r; | ||
382 | } | ||
383 | |||
384 | static inline int emac_opb_mhz(void) | ||
385 | { | ||
386 | return (ocp_sys_info.opb_bus_freq + 500000) / 1000000; | ||
387 | } | ||
388 | |||
389 | /* BHs disabled */ | ||
390 | static int emac_configure(struct ocp_enet_private *dev) | ||
391 | { | ||
392 | struct emac_regs __iomem *p = dev->emacp; | ||
393 | struct net_device *ndev = dev->ndev; | ||
394 | int gige; | ||
395 | u32 r; | ||
396 | |||
397 | DBG("%d: configure" NL, dev->def->index); | ||
398 | |||
399 | if (emac_reset(dev) < 0) | ||
400 | return -ETIMEDOUT; | ||
401 | |||
402 | tah_reset(dev->tah_dev); | ||
403 | |||
404 | /* Mode register */ | ||
405 | r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST; | ||
406 | if (dev->phy.duplex == DUPLEX_FULL) | ||
407 | r |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001; | ||
408 | dev->stop_timeout = STOP_TIMEOUT_10; | ||
409 | switch (dev->phy.speed) { | ||
410 | case SPEED_1000: | ||
411 | if (emac_phy_gpcs(dev->phy.mode)) { | ||
412 | r |= EMAC_MR1_MF_1000GPCS | | ||
413 | EMAC_MR1_MF_IPPA(dev->phy.address); | ||
414 | |||
415 | /* Put some arbitrary OUI, Manuf & Rev IDs so we can | ||
416 | * identify this GPCS PHY later. | ||
417 | */ | ||
418 | out_be32(&p->ipcr, 0xdeadbeef); | ||
419 | } else | ||
420 | r |= EMAC_MR1_MF_1000; | ||
421 | r |= EMAC_MR1_RFS_16K; | ||
422 | gige = 1; | ||
423 | |||
424 | if (dev->ndev->mtu > ETH_DATA_LEN) { | ||
425 | r |= EMAC_MR1_JPSM; | ||
426 | dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO; | ||
427 | } else | ||
428 | dev->stop_timeout = STOP_TIMEOUT_1000; | ||
429 | break; | ||
430 | case SPEED_100: | ||
431 | r |= EMAC_MR1_MF_100; | ||
432 | dev->stop_timeout = STOP_TIMEOUT_100; | ||
433 | /* Fall through */ | ||
434 | default: | ||
435 | r |= EMAC_MR1_RFS_4K; | ||
436 | gige = 0; | ||
437 | break; | ||
438 | } | ||
439 | |||
440 | if (dev->rgmii_dev) | ||
441 | rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input, | ||
442 | dev->phy.speed); | ||
443 | else | ||
444 | zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed); | ||
445 | |||
446 | #if !defined(CONFIG_40x) | ||
447 | /* on 40x erratum forces us to NOT use integrated flow control, | ||
448 | * let's hope it works on 44x ;) | ||
449 | */ | ||
450 | if (dev->phy.duplex == DUPLEX_FULL) { | ||
451 | if (dev->phy.pause) | ||
452 | r |= EMAC_MR1_EIFC | EMAC_MR1_APP; | ||
453 | else if (dev->phy.asym_pause) | ||
454 | r |= EMAC_MR1_APP; | ||
455 | } | ||
456 | #endif | ||
457 | out_be32(&p->mr1, r); | ||
458 | |||
459 | /* Set individual MAC address */ | ||
460 | out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); | ||
461 | out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | | ||
462 | (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | | ||
463 | ndev->dev_addr[5]); | ||
464 | |||
465 | /* VLAN Tag Protocol ID */ | ||
466 | out_be32(&p->vtpid, 0x8100); | ||
467 | |||
468 | /* Receive mode register */ | ||
469 | r = emac_iff2rmr(ndev); | ||
470 | if (r & EMAC_RMR_MAE) | ||
471 | emac_hash_mc(dev); | ||
472 | out_be32(&p->rmr, r); | ||
473 | |||
474 | /* FIFOs thresholds */ | ||
475 | r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1, | ||
476 | EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE); | ||
477 | out_be32(&p->tmr1, r); | ||
478 | out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2)); | ||
479 | |||
480 | /* PAUSE frame is sent when RX FIFO reaches its high-water mark, | ||
481 | there should be still enough space in FIFO to allow the our link | ||
482 | partner time to process this frame and also time to send PAUSE | ||
483 | frame itself. | ||
484 | |||
485 | Here is the worst case scenario for the RX FIFO "headroom" | ||
486 | (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): | ||
487 | |||
488 | 1) One maximum-length frame on TX 1522 bytes | ||
489 | 2) One PAUSE frame time 64 bytes | ||
490 | 3) PAUSE frame decode time allowance 64 bytes | ||
491 | 4) One maximum-length frame on RX 1522 bytes | ||
492 | 5) Round-trip propagation delay of the link (100Mb) 15 bytes | ||
493 | ---------- | ||
494 | 3187 bytes | ||
495 | |||
496 | I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) | ||
497 | low-water mark to RX_FIFO_SIZE / 8 (512 bytes) | ||
498 | */ | ||
499 | r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE, | ||
500 | EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE); | ||
501 | out_be32(&p->rwmr, r); | ||
502 | |||
503 | /* Set PAUSE timer to the maximum */ | ||
504 | out_be32(&p->ptr, 0xffff); | ||
505 | |||
506 | /* IRQ sources */ | ||
507 | out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE | | ||
508 | EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | | ||
509 | EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | | ||
510 | EMAC_ISR_IRE | EMAC_ISR_TE); | ||
511 | |||
512 | /* We need to take GPCS PHY out of isolate mode after EMAC reset */ | ||
513 | if (emac_phy_gpcs(dev->phy.mode)) | ||
514 | mii_reset_phy(&dev->phy); | ||
515 | |||
516 | return 0; | ||
517 | } | ||
518 | |||
519 | /* BHs disabled */ | ||
520 | static void emac_reinitialize(struct ocp_enet_private *dev) | ||
521 | { | ||
522 | DBG("%d: reinitialize" NL, dev->def->index); | ||
523 | |||
524 | if (!emac_configure(dev)) { | ||
525 | emac_tx_enable(dev); | ||
526 | emac_rx_enable(dev); | ||
527 | } | ||
528 | } | ||
529 | |||
530 | /* BHs disabled */ | ||
531 | static void emac_full_tx_reset(struct net_device *ndev) | ||
532 | { | ||
533 | struct ocp_enet_private *dev = ndev->priv; | ||
534 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
535 | |||
536 | DBG("%d: full_tx_reset" NL, dev->def->index); | ||
537 | |||
538 | emac_tx_disable(dev); | ||
539 | mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); | ||
540 | emac_clean_tx_ring(dev); | ||
541 | dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; | ||
542 | |||
543 | emac_configure(dev); | ||
544 | |||
545 | mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); | ||
546 | emac_tx_enable(dev); | ||
547 | emac_rx_enable(dev); | ||
548 | |||
549 | netif_wake_queue(ndev); | ||
550 | } | ||
551 | |||
552 | static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) | ||
553 | { | ||
554 | struct emac_regs __iomem *p = dev->emacp; | ||
555 | u32 r; | ||
556 | int n; | ||
557 | |||
558 | DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg); | ||
559 | |||
560 | /* Enable proper MDIO port */ | ||
561 | zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); | ||
562 | |||
563 | /* Wait for management interface to become idle */ | ||
564 | n = 10; | ||
565 | while (!emac_phy_done(in_be32(&p->stacr))) { | ||
566 | udelay(1); | ||
567 | if (!--n) | ||
568 | goto to; | ||
569 | } | ||
570 | |||
571 | /* Issue read command */ | ||
572 | out_be32(&p->stacr, | ||
573 | EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ | | ||
574 | (reg & EMAC_STACR_PRA_MASK) | ||
575 | | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | ||
576 | | EMAC_STACR_START); | ||
577 | |||
578 | /* Wait for read to complete */ | ||
579 | n = 100; | ||
580 | while (!emac_phy_done(r = in_be32(&p->stacr))) { | ||
581 | udelay(1); | ||
582 | if (!--n) | ||
583 | goto to; | ||
584 | } | ||
585 | |||
586 | if (unlikely(r & EMAC_STACR_PHYE)) { | ||
587 | DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index, | ||
588 | id, reg); | ||
589 | return -EREMOTEIO; | ||
590 | } | ||
591 | |||
592 | r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); | ||
593 | DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r); | ||
594 | return r; | ||
595 | to: | ||
596 | DBG("%d: MII management interface timeout (read)" NL, dev->def->index); | ||
597 | return -ETIMEDOUT; | ||
598 | } | ||
599 | |||
600 | static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, | ||
601 | u16 val) | ||
602 | { | ||
603 | struct emac_regs __iomem *p = dev->emacp; | ||
604 | int n; | ||
605 | |||
606 | DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg, | ||
607 | val); | ||
608 | |||
609 | /* Enable proper MDIO port */ | ||
610 | zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); | ||
611 | |||
612 | /* Wait for management interface to be idle */ | ||
613 | n = 10; | ||
614 | while (!emac_phy_done(in_be32(&p->stacr))) { | ||
615 | udelay(1); | ||
616 | if (!--n) | ||
617 | goto to; | ||
618 | } | ||
619 | |||
620 | /* Issue write command */ | ||
621 | out_be32(&p->stacr, | ||
622 | EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE | | ||
623 | (reg & EMAC_STACR_PRA_MASK) | | ||
624 | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | | ||
625 | (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START); | ||
626 | |||
627 | /* Wait for write to complete */ | ||
628 | n = 100; | ||
629 | while (!emac_phy_done(in_be32(&p->stacr))) { | ||
630 | udelay(1); | ||
631 | if (!--n) | ||
632 | goto to; | ||
633 | } | ||
634 | return; | ||
635 | to: | ||
636 | DBG("%d: MII management interface timeout (write)" NL, dev->def->index); | ||
637 | } | ||
638 | |||
639 | static int emac_mdio_read(struct net_device *ndev, int id, int reg) | ||
640 | { | ||
641 | struct ocp_enet_private *dev = ndev->priv; | ||
642 | int res; | ||
643 | |||
644 | local_bh_disable(); | ||
645 | res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, | ||
646 | (u8) reg); | ||
647 | local_bh_enable(); | ||
648 | return res; | ||
649 | } | ||
650 | |||
651 | static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) | ||
652 | { | ||
653 | struct ocp_enet_private *dev = ndev->priv; | ||
654 | |||
655 | local_bh_disable(); | ||
656 | __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, | ||
657 | (u8) reg, (u16) val); | ||
658 | local_bh_enable(); | ||
659 | } | ||
660 | |||
661 | /* BHs disabled */ | ||
662 | static void emac_set_multicast_list(struct net_device *ndev) | ||
663 | { | ||
664 | struct ocp_enet_private *dev = ndev->priv; | ||
665 | struct emac_regs __iomem *p = dev->emacp; | ||
666 | u32 rmr = emac_iff2rmr(ndev); | ||
667 | |||
668 | DBG("%d: multicast %08x" NL, dev->def->index, rmr); | ||
669 | BUG_ON(!netif_running(dev->ndev)); | ||
670 | |||
671 | /* I decided to relax register access rules here to avoid | ||
672 | * full EMAC reset. | ||
673 | * | ||
674 | * There is a real problem with EMAC4 core if we use MWSW_001 bit | ||
675 | * in MR1 register and do a full EMAC reset. | ||
676 | * One TX BD status update is delayed and, after EMAC reset, it | ||
677 | * never happens, resulting in TX hung (it'll be recovered by TX | ||
678 | * timeout handler eventually, but this is just gross). | ||
679 | * So we either have to do full TX reset or try to cheat here :) | ||
680 | * | ||
681 | * The only required change is to RX mode register, so I *think* all | ||
682 | * we need is just to stop RX channel. This seems to work on all | ||
683 | * tested SoCs. --ebs | ||
684 | */ | ||
685 | emac_rx_disable(dev); | ||
686 | if (rmr & EMAC_RMR_MAE) | ||
687 | emac_hash_mc(dev); | ||
688 | out_be32(&p->rmr, rmr); | ||
689 | emac_rx_enable(dev); | ||
690 | } | ||
691 | |||
692 | /* BHs disabled */ | ||
693 | static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu) | ||
694 | { | ||
695 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
696 | int rx_sync_size = emac_rx_sync_size(new_mtu); | ||
697 | int rx_skb_size = emac_rx_skb_size(new_mtu); | ||
698 | int i, ret = 0; | ||
699 | |||
700 | emac_rx_disable(dev); | ||
701 | mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); | ||
702 | |||
703 | if (dev->rx_sg_skb) { | ||
704 | ++dev->estats.rx_dropped_resize; | ||
705 | dev_kfree_skb(dev->rx_sg_skb); | ||
706 | dev->rx_sg_skb = NULL; | ||
707 | } | ||
708 | |||
709 | /* Make a first pass over RX ring and mark BDs ready, dropping | ||
710 | * non-processed packets on the way. We need this as a separate pass | ||
711 | * to simplify error recovery in the case of allocation failure later. | ||
712 | */ | ||
713 | for (i = 0; i < NUM_RX_BUFF; ++i) { | ||
714 | if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) | ||
715 | ++dev->estats.rx_dropped_resize; | ||
716 | |||
717 | dev->rx_desc[i].data_len = 0; | ||
718 | dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | | ||
719 | (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); | ||
720 | } | ||
721 | |||
722 | /* Reallocate RX ring only if bigger skb buffers are required */ | ||
723 | if (rx_skb_size <= dev->rx_skb_size) | ||
724 | goto skip; | ||
725 | |||
726 | /* Second pass, allocate new skbs */ | ||
727 | for (i = 0; i < NUM_RX_BUFF; ++i) { | ||
728 | struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); | ||
729 | if (!skb) { | ||
730 | ret = -ENOMEM; | ||
731 | goto oom; | ||
732 | } | ||
733 | |||
734 | BUG_ON(!dev->rx_skb[i]); | ||
735 | dev_kfree_skb(dev->rx_skb[i]); | ||
736 | |||
737 | skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); | ||
738 | dev->rx_desc[i].data_ptr = | ||
739 | dma_map_single(dev->ldev, skb->data - 2, rx_sync_size, | ||
740 | DMA_FROM_DEVICE) + 2; | ||
741 | dev->rx_skb[i] = skb; | ||
742 | } | ||
743 | skip: | ||
744 | /* Check if we need to change "Jumbo" bit in MR1 */ | ||
745 | if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { | ||
746 | /* This is to prevent starting RX channel in emac_rx_enable() */ | ||
747 | dev->commac.rx_stopped = 1; | ||
748 | |||
749 | dev->ndev->mtu = new_mtu; | ||
750 | emac_full_tx_reset(dev->ndev); | ||
751 | } | ||
752 | |||
753 | mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu)); | ||
754 | oom: | ||
755 | /* Restart RX */ | ||
756 | dev->commac.rx_stopped = dev->rx_slot = 0; | ||
757 | mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); | ||
758 | emac_rx_enable(dev); | ||
759 | |||
760 | return ret; | ||
761 | } | ||
762 | |||
763 | /* Process ctx, rtnl_lock semaphore */ | ||
764 | static int emac_change_mtu(struct net_device *ndev, int new_mtu) | ||
765 | { | ||
766 | struct ocp_enet_private *dev = ndev->priv; | ||
767 | int ret = 0; | ||
768 | |||
769 | if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU) | ||
770 | return -EINVAL; | ||
771 | |||
772 | DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu); | ||
773 | |||
774 | local_bh_disable(); | ||
775 | if (netif_running(ndev)) { | ||
776 | /* Check if we really need to reinitalize RX ring */ | ||
777 | if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) | ||
778 | ret = emac_resize_rx_ring(dev, new_mtu); | ||
779 | } | ||
780 | |||
781 | if (!ret) { | ||
782 | ndev->mtu = new_mtu; | ||
783 | dev->rx_skb_size = emac_rx_skb_size(new_mtu); | ||
784 | dev->rx_sync_size = emac_rx_sync_size(new_mtu); | ||
785 | } | ||
786 | local_bh_enable(); | ||
787 | |||
788 | return ret; | ||
789 | } | ||
790 | |||
791 | static void emac_clean_tx_ring(struct ocp_enet_private *dev) | ||
792 | { | ||
793 | int i; | ||
794 | for (i = 0; i < NUM_TX_BUFF; ++i) { | ||
795 | if (dev->tx_skb[i]) { | ||
796 | dev_kfree_skb(dev->tx_skb[i]); | ||
797 | dev->tx_skb[i] = NULL; | ||
798 | if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) | ||
799 | ++dev->estats.tx_dropped; | ||
800 | } | ||
801 | dev->tx_desc[i].ctrl = 0; | ||
802 | dev->tx_desc[i].data_ptr = 0; | ||
803 | } | ||
804 | } | ||
805 | |||
806 | static void emac_clean_rx_ring(struct ocp_enet_private *dev) | ||
807 | { | ||
808 | int i; | ||
809 | for (i = 0; i < NUM_RX_BUFF; ++i) | ||
810 | if (dev->rx_skb[i]) { | ||
811 | dev->rx_desc[i].ctrl = 0; | ||
812 | dev_kfree_skb(dev->rx_skb[i]); | ||
813 | dev->rx_skb[i] = NULL; | ||
814 | dev->rx_desc[i].data_ptr = 0; | ||
815 | } | ||
816 | |||
817 | if (dev->rx_sg_skb) { | ||
818 | dev_kfree_skb(dev->rx_sg_skb); | ||
819 | dev->rx_sg_skb = NULL; | ||
820 | } | ||
821 | } | ||
822 | |||
823 | static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot, | ||
824 | gfp_t flags) | ||
825 | { | ||
826 | struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); | ||
827 | if (unlikely(!skb)) | ||
828 | return -ENOMEM; | ||
829 | |||
830 | dev->rx_skb[slot] = skb; | ||
831 | dev->rx_desc[slot].data_len = 0; | ||
832 | |||
833 | skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); | ||
834 | dev->rx_desc[slot].data_ptr = | ||
835 | dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size, | ||
836 | DMA_FROM_DEVICE) + 2; | ||
837 | barrier(); | ||
838 | dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | | ||
839 | (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); | ||
840 | |||
841 | return 0; | ||
842 | } | ||
843 | |||
844 | static void emac_print_link_status(struct ocp_enet_private *dev) | ||
845 | { | ||
846 | if (netif_carrier_ok(dev->ndev)) | ||
847 | printk(KERN_INFO "%s: link is up, %d %s%s\n", | ||
848 | dev->ndev->name, dev->phy.speed, | ||
849 | dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", | ||
850 | dev->phy.pause ? ", pause enabled" : | ||
851 | dev->phy.asym_pause ? ", assymetric pause enabled" : ""); | ||
852 | else | ||
853 | printk(KERN_INFO "%s: link is down\n", dev->ndev->name); | ||
854 | } | ||
855 | |||
856 | /* Process ctx, rtnl_lock semaphore */ | ||
857 | static int emac_open(struct net_device *ndev) | ||
858 | { | ||
859 | struct ocp_enet_private *dev = ndev->priv; | ||
860 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
861 | int err, i; | ||
862 | |||
863 | DBG("%d: open" NL, dev->def->index); | ||
864 | |||
865 | /* Setup error IRQ handler */ | ||
866 | err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev); | ||
867 | if (err) { | ||
868 | printk(KERN_ERR "%s: failed to request IRQ %d\n", | ||
869 | ndev->name, dev->def->irq); | ||
870 | return err; | ||
871 | } | ||
872 | |||
873 | /* Allocate RX ring */ | ||
874 | for (i = 0; i < NUM_RX_BUFF; ++i) | ||
875 | if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { | ||
876 | printk(KERN_ERR "%s: failed to allocate RX ring\n", | ||
877 | ndev->name); | ||
878 | goto oom; | ||
879 | } | ||
880 | |||
881 | local_bh_disable(); | ||
882 | dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = | ||
883 | dev->commac.rx_stopped = 0; | ||
884 | dev->rx_sg_skb = NULL; | ||
885 | |||
886 | if (dev->phy.address >= 0) { | ||
887 | int link_poll_interval; | ||
888 | if (dev->phy.def->ops->poll_link(&dev->phy)) { | ||
889 | dev->phy.def->ops->read_link(&dev->phy); | ||
890 | EMAC_RX_CLK_DEFAULT(dev->def->index); | ||
891 | netif_carrier_on(dev->ndev); | ||
892 | link_poll_interval = PHY_POLL_LINK_ON; | ||
893 | } else { | ||
894 | EMAC_RX_CLK_TX(dev->def->index); | ||
895 | netif_carrier_off(dev->ndev); | ||
896 | link_poll_interval = PHY_POLL_LINK_OFF; | ||
897 | } | ||
898 | mod_timer(&dev->link_timer, jiffies + link_poll_interval); | ||
899 | emac_print_link_status(dev); | ||
900 | } else | ||
901 | netif_carrier_on(dev->ndev); | ||
902 | |||
903 | emac_configure(dev); | ||
904 | mal_poll_add(dev->mal, &dev->commac); | ||
905 | mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); | ||
906 | mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu)); | ||
907 | mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); | ||
908 | emac_tx_enable(dev); | ||
909 | emac_rx_enable(dev); | ||
910 | netif_start_queue(ndev); | ||
911 | local_bh_enable(); | ||
912 | |||
913 | return 0; | ||
914 | oom: | ||
915 | emac_clean_rx_ring(dev); | ||
916 | free_irq(dev->def->irq, dev); | ||
917 | return -ENOMEM; | ||
918 | } | ||
919 | |||
920 | /* BHs disabled */ | ||
921 | static int emac_link_differs(struct ocp_enet_private *dev) | ||
922 | { | ||
923 | u32 r = in_be32(&dev->emacp->mr1); | ||
924 | |||
925 | int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; | ||
926 | int speed, pause, asym_pause; | ||
927 | |||
928 | if (r & EMAC_MR1_MF_1000) | ||
929 | speed = SPEED_1000; | ||
930 | else if (r & EMAC_MR1_MF_100) | ||
931 | speed = SPEED_100; | ||
932 | else | ||
933 | speed = SPEED_10; | ||
934 | |||
935 | switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { | ||
936 | case (EMAC_MR1_EIFC | EMAC_MR1_APP): | ||
937 | pause = 1; | ||
938 | asym_pause = 0; | ||
939 | break; | ||
940 | case EMAC_MR1_APP: | ||
941 | pause = 0; | ||
942 | asym_pause = 1; | ||
943 | break; | ||
944 | default: | ||
945 | pause = asym_pause = 0; | ||
946 | } | ||
947 | return speed != dev->phy.speed || duplex != dev->phy.duplex || | ||
948 | pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; | ||
949 | } | ||
950 | |||
951 | /* BHs disabled */ | ||
952 | static void emac_link_timer(unsigned long data) | ||
953 | { | ||
954 | struct ocp_enet_private *dev = (struct ocp_enet_private *)data; | ||
955 | int link_poll_interval; | ||
956 | |||
957 | DBG2("%d: link timer" NL, dev->def->index); | ||
958 | |||
959 | if (dev->phy.def->ops->poll_link(&dev->phy)) { | ||
960 | if (!netif_carrier_ok(dev->ndev)) { | ||
961 | EMAC_RX_CLK_DEFAULT(dev->def->index); | ||
962 | |||
963 | /* Get new link parameters */ | ||
964 | dev->phy.def->ops->read_link(&dev->phy); | ||
965 | |||
966 | if (dev->tah_dev || emac_link_differs(dev)) | ||
967 | emac_full_tx_reset(dev->ndev); | ||
968 | |||
969 | netif_carrier_on(dev->ndev); | ||
970 | emac_print_link_status(dev); | ||
971 | } | ||
972 | link_poll_interval = PHY_POLL_LINK_ON; | ||
973 | } else { | ||
974 | if (netif_carrier_ok(dev->ndev)) { | ||
975 | EMAC_RX_CLK_TX(dev->def->index); | ||
976 | #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) | ||
977 | emac_reinitialize(dev); | ||
978 | #endif | ||
979 | netif_carrier_off(dev->ndev); | ||
980 | emac_print_link_status(dev); | ||
981 | } | ||
982 | |||
983 | /* Retry reset if the previous attempt failed. | ||
984 | * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX | ||
985 | * case, but I left it here because it shouldn't trigger for | ||
986 | * sane PHYs anyway. | ||
987 | */ | ||
988 | if (unlikely(dev->reset_failed)) | ||
989 | emac_reinitialize(dev); | ||
990 | |||
991 | link_poll_interval = PHY_POLL_LINK_OFF; | ||
992 | } | ||
993 | mod_timer(&dev->link_timer, jiffies + link_poll_interval); | ||
994 | } | ||
995 | |||
996 | /* BHs disabled */ | ||
997 | static void emac_force_link_update(struct ocp_enet_private *dev) | ||
998 | { | ||
999 | netif_carrier_off(dev->ndev); | ||
1000 | if (timer_pending(&dev->link_timer)) | ||
1001 | mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF); | ||
1002 | } | ||
1003 | |||
1004 | /* Process ctx, rtnl_lock semaphore */ | ||
1005 | static int emac_close(struct net_device *ndev) | ||
1006 | { | ||
1007 | struct ocp_enet_private *dev = ndev->priv; | ||
1008 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
1009 | |||
1010 | DBG("%d: close" NL, dev->def->index); | ||
1011 | |||
1012 | local_bh_disable(); | ||
1013 | |||
1014 | if (dev->phy.address >= 0) | ||
1015 | del_timer_sync(&dev->link_timer); | ||
1016 | |||
1017 | netif_stop_queue(ndev); | ||
1018 | emac_rx_disable(dev); | ||
1019 | emac_tx_disable(dev); | ||
1020 | mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); | ||
1021 | mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); | ||
1022 | mal_poll_del(dev->mal, &dev->commac); | ||
1023 | local_bh_enable(); | ||
1024 | |||
1025 | emac_clean_tx_ring(dev); | ||
1026 | emac_clean_rx_ring(dev); | ||
1027 | free_irq(dev->def->irq, dev); | ||
1028 | |||
1029 | return 0; | ||
1030 | } | ||
1031 | |||
1032 | static inline u16 emac_tx_csum(struct ocp_enet_private *dev, | ||
1033 | struct sk_buff *skb) | ||
1034 | { | ||
1035 | #if defined(CONFIG_IBM_EMAC_TAH) | ||
1036 | if (skb->ip_summed == CHECKSUM_PARTIAL) { | ||
1037 | ++dev->stats.tx_packets_csum; | ||
1038 | return EMAC_TX_CTRL_TAH_CSUM; | ||
1039 | } | ||
1040 | #endif | ||
1041 | return 0; | ||
1042 | } | ||
1043 | |||
1044 | static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len) | ||
1045 | { | ||
1046 | struct emac_regs __iomem *p = dev->emacp; | ||
1047 | struct net_device *ndev = dev->ndev; | ||
1048 | |||
1049 | /* Send the packet out */ | ||
1050 | out_be32(&p->tmr0, EMAC_TMR0_XMIT); | ||
1051 | |||
1052 | if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { | ||
1053 | netif_stop_queue(ndev); | ||
1054 | DBG2("%d: stopped TX queue" NL, dev->def->index); | ||
1055 | } | ||
1056 | |||
1057 | ndev->trans_start = jiffies; | ||
1058 | ++dev->stats.tx_packets; | ||
1059 | dev->stats.tx_bytes += len; | ||
1060 | |||
1061 | return 0; | ||
1062 | } | ||
1063 | |||
1064 | /* BHs disabled */ | ||
1065 | static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) | ||
1066 | { | ||
1067 | struct ocp_enet_private *dev = ndev->priv; | ||
1068 | unsigned int len = skb->len; | ||
1069 | int slot; | ||
1070 | |||
1071 | u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | | ||
1072 | MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); | ||
1073 | |||
1074 | slot = dev->tx_slot++; | ||
1075 | if (dev->tx_slot == NUM_TX_BUFF) { | ||
1076 | dev->tx_slot = 0; | ||
1077 | ctrl |= MAL_TX_CTRL_WRAP; | ||
1078 | } | ||
1079 | |||
1080 | DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot); | ||
1081 | |||
1082 | dev->tx_skb[slot] = skb; | ||
1083 | dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len, | ||
1084 | DMA_TO_DEVICE); | ||
1085 | dev->tx_desc[slot].data_len = (u16) len; | ||
1086 | barrier(); | ||
1087 | dev->tx_desc[slot].ctrl = ctrl; | ||
1088 | |||
1089 | return emac_xmit_finish(dev, len); | ||
1090 | } | ||
1091 | |||
1092 | #if defined(CONFIG_IBM_EMAC_TAH) | ||
1093 | static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot, | ||
1094 | u32 pd, int len, int last, u16 base_ctrl) | ||
1095 | { | ||
1096 | while (1) { | ||
1097 | u16 ctrl = base_ctrl; | ||
1098 | int chunk = min(len, MAL_MAX_TX_SIZE); | ||
1099 | len -= chunk; | ||
1100 | |||
1101 | slot = (slot + 1) % NUM_TX_BUFF; | ||
1102 | |||
1103 | if (last && !len) | ||
1104 | ctrl |= MAL_TX_CTRL_LAST; | ||
1105 | if (slot == NUM_TX_BUFF - 1) | ||
1106 | ctrl |= MAL_TX_CTRL_WRAP; | ||
1107 | |||
1108 | dev->tx_skb[slot] = NULL; | ||
1109 | dev->tx_desc[slot].data_ptr = pd; | ||
1110 | dev->tx_desc[slot].data_len = (u16) chunk; | ||
1111 | dev->tx_desc[slot].ctrl = ctrl; | ||
1112 | ++dev->tx_cnt; | ||
1113 | |||
1114 | if (!len) | ||
1115 | break; | ||
1116 | |||
1117 | pd += chunk; | ||
1118 | } | ||
1119 | return slot; | ||
1120 | } | ||
1121 | |||
1122 | /* BHs disabled (SG version for TAH equipped EMACs) */ | ||
1123 | static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) | ||
1124 | { | ||
1125 | struct ocp_enet_private *dev = ndev->priv; | ||
1126 | int nr_frags = skb_shinfo(skb)->nr_frags; | ||
1127 | int len = skb->len, chunk; | ||
1128 | int slot, i; | ||
1129 | u16 ctrl; | ||
1130 | u32 pd; | ||
1131 | |||
1132 | /* This is common "fast" path */ | ||
1133 | if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) | ||
1134 | return emac_start_xmit(skb, ndev); | ||
1135 | |||
1136 | len -= skb->data_len; | ||
1137 | |||
1138 | /* Note, this is only an *estimation*, we can still run out of empty | ||
1139 | * slots because of the additional fragmentation into | ||
1140 | * MAL_MAX_TX_SIZE-sized chunks | ||
1141 | */ | ||
1142 | if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) | ||
1143 | goto stop_queue; | ||
1144 | |||
1145 | ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | | ||
1146 | emac_tx_csum(dev, skb); | ||
1147 | slot = dev->tx_slot; | ||
1148 | |||
1149 | /* skb data */ | ||
1150 | dev->tx_skb[slot] = NULL; | ||
1151 | chunk = min(len, MAL_MAX_TX_SIZE); | ||
1152 | dev->tx_desc[slot].data_ptr = pd = | ||
1153 | dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE); | ||
1154 | dev->tx_desc[slot].data_len = (u16) chunk; | ||
1155 | len -= chunk; | ||
1156 | if (unlikely(len)) | ||
1157 | slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, | ||
1158 | ctrl); | ||
1159 | /* skb fragments */ | ||
1160 | for (i = 0; i < nr_frags; ++i) { | ||
1161 | struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; | ||
1162 | len = frag->size; | ||
1163 | |||
1164 | if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) | ||
1165 | goto undo_frame; | ||
1166 | |||
1167 | pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len, | ||
1168 | DMA_TO_DEVICE); | ||
1169 | |||
1170 | slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, | ||
1171 | ctrl); | ||
1172 | } | ||
1173 | |||
1174 | DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len, | ||
1175 | dev->tx_slot, slot); | ||
1176 | |||
1177 | /* Attach skb to the last slot so we don't release it too early */ | ||
1178 | dev->tx_skb[slot] = skb; | ||
1179 | |||
1180 | /* Send the packet out */ | ||
1181 | if (dev->tx_slot == NUM_TX_BUFF - 1) | ||
1182 | ctrl |= MAL_TX_CTRL_WRAP; | ||
1183 | barrier(); | ||
1184 | dev->tx_desc[dev->tx_slot].ctrl = ctrl; | ||
1185 | dev->tx_slot = (slot + 1) % NUM_TX_BUFF; | ||
1186 | |||
1187 | return emac_xmit_finish(dev, skb->len); | ||
1188 | |||
1189 | undo_frame: | ||
1190 | /* Well, too bad. Our previous estimation was overly optimistic. | ||
1191 | * Undo everything. | ||
1192 | */ | ||
1193 | while (slot != dev->tx_slot) { | ||
1194 | dev->tx_desc[slot].ctrl = 0; | ||
1195 | --dev->tx_cnt; | ||
1196 | if (--slot < 0) | ||
1197 | slot = NUM_TX_BUFF - 1; | ||
1198 | } | ||
1199 | ++dev->estats.tx_undo; | ||
1200 | |||
1201 | stop_queue: | ||
1202 | netif_stop_queue(ndev); | ||
1203 | DBG2("%d: stopped TX queue" NL, dev->def->index); | ||
1204 | return 1; | ||
1205 | } | ||
1206 | #else | ||
1207 | # define emac_start_xmit_sg emac_start_xmit | ||
1208 | #endif /* !defined(CONFIG_IBM_EMAC_TAH) */ | ||
1209 | |||
1210 | /* BHs disabled */ | ||
1211 | static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl) | ||
1212 | { | ||
1213 | struct ibm_emac_error_stats *st = &dev->estats; | ||
1214 | DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl); | ||
1215 | |||
1216 | ++st->tx_bd_errors; | ||
1217 | if (ctrl & EMAC_TX_ST_BFCS) | ||
1218 | ++st->tx_bd_bad_fcs; | ||
1219 | if (ctrl & EMAC_TX_ST_LCS) | ||
1220 | ++st->tx_bd_carrier_loss; | ||
1221 | if (ctrl & EMAC_TX_ST_ED) | ||
1222 | ++st->tx_bd_excessive_deferral; | ||
1223 | if (ctrl & EMAC_TX_ST_EC) | ||
1224 | ++st->tx_bd_excessive_collisions; | ||
1225 | if (ctrl & EMAC_TX_ST_LC) | ||
1226 | ++st->tx_bd_late_collision; | ||
1227 | if (ctrl & EMAC_TX_ST_MC) | ||
1228 | ++st->tx_bd_multple_collisions; | ||
1229 | if (ctrl & EMAC_TX_ST_SC) | ||
1230 | ++st->tx_bd_single_collision; | ||
1231 | if (ctrl & EMAC_TX_ST_UR) | ||
1232 | ++st->tx_bd_underrun; | ||
1233 | if (ctrl & EMAC_TX_ST_SQE) | ||
1234 | ++st->tx_bd_sqe; | ||
1235 | } | ||
1236 | |||
1237 | static void emac_poll_tx(void *param) | ||
1238 | { | ||
1239 | struct ocp_enet_private *dev = param; | ||
1240 | DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt, | ||
1241 | dev->ack_slot); | ||
1242 | |||
1243 | if (dev->tx_cnt) { | ||
1244 | u16 ctrl; | ||
1245 | int slot = dev->ack_slot, n = 0; | ||
1246 | again: | ||
1247 | ctrl = dev->tx_desc[slot].ctrl; | ||
1248 | if (!(ctrl & MAL_TX_CTRL_READY)) { | ||
1249 | struct sk_buff *skb = dev->tx_skb[slot]; | ||
1250 | ++n; | ||
1251 | |||
1252 | if (skb) { | ||
1253 | dev_kfree_skb(skb); | ||
1254 | dev->tx_skb[slot] = NULL; | ||
1255 | } | ||
1256 | slot = (slot + 1) % NUM_TX_BUFF; | ||
1257 | |||
1258 | if (unlikely(EMAC_IS_BAD_TX(ctrl))) | ||
1259 | emac_parse_tx_error(dev, ctrl); | ||
1260 | |||
1261 | if (--dev->tx_cnt) | ||
1262 | goto again; | ||
1263 | } | ||
1264 | if (n) { | ||
1265 | dev->ack_slot = slot; | ||
1266 | if (netif_queue_stopped(dev->ndev) && | ||
1267 | dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) | ||
1268 | netif_wake_queue(dev->ndev); | ||
1269 | |||
1270 | DBG2("%d: tx %d pkts" NL, dev->def->index, n); | ||
1271 | } | ||
1272 | } | ||
1273 | } | ||
1274 | |||
1275 | static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot, | ||
1276 | int len) | ||
1277 | { | ||
1278 | struct sk_buff *skb = dev->rx_skb[slot]; | ||
1279 | DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len); | ||
1280 | |||
1281 | if (len) | ||
1282 | dma_map_single(dev->ldev, skb->data - 2, | ||
1283 | EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); | ||
1284 | |||
1285 | dev->rx_desc[slot].data_len = 0; | ||
1286 | barrier(); | ||
1287 | dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | | ||
1288 | (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); | ||
1289 | } | ||
1290 | |||
1291 | static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl) | ||
1292 | { | ||
1293 | struct ibm_emac_error_stats *st = &dev->estats; | ||
1294 | DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl); | ||
1295 | |||
1296 | ++st->rx_bd_errors; | ||
1297 | if (ctrl & EMAC_RX_ST_OE) | ||
1298 | ++st->rx_bd_overrun; | ||
1299 | if (ctrl & EMAC_RX_ST_BP) | ||
1300 | ++st->rx_bd_bad_packet; | ||
1301 | if (ctrl & EMAC_RX_ST_RP) | ||
1302 | ++st->rx_bd_runt_packet; | ||
1303 | if (ctrl & EMAC_RX_ST_SE) | ||
1304 | ++st->rx_bd_short_event; | ||
1305 | if (ctrl & EMAC_RX_ST_AE) | ||
1306 | ++st->rx_bd_alignment_error; | ||
1307 | if (ctrl & EMAC_RX_ST_BFCS) | ||
1308 | ++st->rx_bd_bad_fcs; | ||
1309 | if (ctrl & EMAC_RX_ST_PTL) | ||
1310 | ++st->rx_bd_packet_too_long; | ||
1311 | if (ctrl & EMAC_RX_ST_ORE) | ||
1312 | ++st->rx_bd_out_of_range; | ||
1313 | if (ctrl & EMAC_RX_ST_IRE) | ||
1314 | ++st->rx_bd_in_range; | ||
1315 | } | ||
1316 | |||
1317 | static inline void emac_rx_csum(struct ocp_enet_private *dev, | ||
1318 | struct sk_buff *skb, u16 ctrl) | ||
1319 | { | ||
1320 | #if defined(CONFIG_IBM_EMAC_TAH) | ||
1321 | if (!ctrl && dev->tah_dev) { | ||
1322 | skb->ip_summed = CHECKSUM_UNNECESSARY; | ||
1323 | ++dev->stats.rx_packets_csum; | ||
1324 | } | ||
1325 | #endif | ||
1326 | } | ||
1327 | |||
1328 | static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot) | ||
1329 | { | ||
1330 | if (likely(dev->rx_sg_skb != NULL)) { | ||
1331 | int len = dev->rx_desc[slot].data_len; | ||
1332 | int tot_len = dev->rx_sg_skb->len + len; | ||
1333 | |||
1334 | if (unlikely(tot_len + 2 > dev->rx_skb_size)) { | ||
1335 | ++dev->estats.rx_dropped_mtu; | ||
1336 | dev_kfree_skb(dev->rx_sg_skb); | ||
1337 | dev->rx_sg_skb = NULL; | ||
1338 | } else { | ||
1339 | cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb), | ||
1340 | dev->rx_skb[slot]->data, len); | ||
1341 | skb_put(dev->rx_sg_skb, len); | ||
1342 | emac_recycle_rx_skb(dev, slot, len); | ||
1343 | return 0; | ||
1344 | } | ||
1345 | } | ||
1346 | emac_recycle_rx_skb(dev, slot, 0); | ||
1347 | return -1; | ||
1348 | } | ||
1349 | |||
1350 | /* BHs disabled */ | ||
1351 | static int emac_poll_rx(void *param, int budget) | ||
1352 | { | ||
1353 | struct ocp_enet_private *dev = param; | ||
1354 | int slot = dev->rx_slot, received = 0; | ||
1355 | |||
1356 | DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget); | ||
1357 | |||
1358 | again: | ||
1359 | while (budget > 0) { | ||
1360 | int len; | ||
1361 | struct sk_buff *skb; | ||
1362 | u16 ctrl = dev->rx_desc[slot].ctrl; | ||
1363 | |||
1364 | if (ctrl & MAL_RX_CTRL_EMPTY) | ||
1365 | break; | ||
1366 | |||
1367 | skb = dev->rx_skb[slot]; | ||
1368 | barrier(); | ||
1369 | len = dev->rx_desc[slot].data_len; | ||
1370 | |||
1371 | if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) | ||
1372 | goto sg; | ||
1373 | |||
1374 | ctrl &= EMAC_BAD_RX_MASK; | ||
1375 | if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { | ||
1376 | emac_parse_rx_error(dev, ctrl); | ||
1377 | ++dev->estats.rx_dropped_error; | ||
1378 | emac_recycle_rx_skb(dev, slot, 0); | ||
1379 | len = 0; | ||
1380 | goto next; | ||
1381 | } | ||
1382 | |||
1383 | if (len && len < EMAC_RX_COPY_THRESH) { | ||
1384 | struct sk_buff *copy_skb = | ||
1385 | alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); | ||
1386 | if (unlikely(!copy_skb)) | ||
1387 | goto oom; | ||
1388 | |||
1389 | skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); | ||
1390 | cacheable_memcpy(copy_skb->data - 2, skb->data - 2, | ||
1391 | len + 2); | ||
1392 | emac_recycle_rx_skb(dev, slot, len); | ||
1393 | skb = copy_skb; | ||
1394 | } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) | ||
1395 | goto oom; | ||
1396 | |||
1397 | skb_put(skb, len); | ||
1398 | push_packet: | ||
1399 | skb->protocol = eth_type_trans(skb, dev->ndev); | ||
1400 | emac_rx_csum(dev, skb, ctrl); | ||
1401 | |||
1402 | if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) | ||
1403 | ++dev->estats.rx_dropped_stack; | ||
1404 | next: | ||
1405 | ++dev->stats.rx_packets; | ||
1406 | skip: | ||
1407 | dev->stats.rx_bytes += len; | ||
1408 | slot = (slot + 1) % NUM_RX_BUFF; | ||
1409 | --budget; | ||
1410 | ++received; | ||
1411 | continue; | ||
1412 | sg: | ||
1413 | if (ctrl & MAL_RX_CTRL_FIRST) { | ||
1414 | BUG_ON(dev->rx_sg_skb); | ||
1415 | if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { | ||
1416 | DBG("%d: rx OOM %d" NL, dev->def->index, slot); | ||
1417 | ++dev->estats.rx_dropped_oom; | ||
1418 | emac_recycle_rx_skb(dev, slot, 0); | ||
1419 | } else { | ||
1420 | dev->rx_sg_skb = skb; | ||
1421 | skb_put(skb, len); | ||
1422 | } | ||
1423 | } else if (!emac_rx_sg_append(dev, slot) && | ||
1424 | (ctrl & MAL_RX_CTRL_LAST)) { | ||
1425 | |||
1426 | skb = dev->rx_sg_skb; | ||
1427 | dev->rx_sg_skb = NULL; | ||
1428 | |||
1429 | ctrl &= EMAC_BAD_RX_MASK; | ||
1430 | if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { | ||
1431 | emac_parse_rx_error(dev, ctrl); | ||
1432 | ++dev->estats.rx_dropped_error; | ||
1433 | dev_kfree_skb(skb); | ||
1434 | len = 0; | ||
1435 | } else | ||
1436 | goto push_packet; | ||
1437 | } | ||
1438 | goto skip; | ||
1439 | oom: | ||
1440 | DBG("%d: rx OOM %d" NL, dev->def->index, slot); | ||
1441 | /* Drop the packet and recycle skb */ | ||
1442 | ++dev->estats.rx_dropped_oom; | ||
1443 | emac_recycle_rx_skb(dev, slot, 0); | ||
1444 | goto next; | ||
1445 | } | ||
1446 | |||
1447 | if (received) { | ||
1448 | DBG2("%d: rx %d BDs" NL, dev->def->index, received); | ||
1449 | dev->rx_slot = slot; | ||
1450 | } | ||
1451 | |||
1452 | if (unlikely(budget && dev->commac.rx_stopped)) { | ||
1453 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
1454 | |||
1455 | barrier(); | ||
1456 | if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { | ||
1457 | DBG2("%d: rx restart" NL, dev->def->index); | ||
1458 | received = 0; | ||
1459 | goto again; | ||
1460 | } | ||
1461 | |||
1462 | if (dev->rx_sg_skb) { | ||
1463 | DBG2("%d: dropping partial rx packet" NL, | ||
1464 | dev->def->index); | ||
1465 | ++dev->estats.rx_dropped_error; | ||
1466 | dev_kfree_skb(dev->rx_sg_skb); | ||
1467 | dev->rx_sg_skb = NULL; | ||
1468 | } | ||
1469 | |||
1470 | dev->commac.rx_stopped = 0; | ||
1471 | mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); | ||
1472 | emac_rx_enable(dev); | ||
1473 | dev->rx_slot = 0; | ||
1474 | } | ||
1475 | return received; | ||
1476 | } | ||
1477 | |||
1478 | /* BHs disabled */ | ||
1479 | static int emac_peek_rx(void *param) | ||
1480 | { | ||
1481 | struct ocp_enet_private *dev = param; | ||
1482 | return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); | ||
1483 | } | ||
1484 | |||
1485 | /* BHs disabled */ | ||
1486 | static int emac_peek_rx_sg(void *param) | ||
1487 | { | ||
1488 | struct ocp_enet_private *dev = param; | ||
1489 | int slot = dev->rx_slot; | ||
1490 | while (1) { | ||
1491 | u16 ctrl = dev->rx_desc[slot].ctrl; | ||
1492 | if (ctrl & MAL_RX_CTRL_EMPTY) | ||
1493 | return 0; | ||
1494 | else if (ctrl & MAL_RX_CTRL_LAST) | ||
1495 | return 1; | ||
1496 | |||
1497 | slot = (slot + 1) % NUM_RX_BUFF; | ||
1498 | |||
1499 | /* I'm just being paranoid here :) */ | ||
1500 | if (unlikely(slot == dev->rx_slot)) | ||
1501 | return 0; | ||
1502 | } | ||
1503 | } | ||
1504 | |||
1505 | /* Hard IRQ */ | ||
1506 | static void emac_rxde(void *param) | ||
1507 | { | ||
1508 | struct ocp_enet_private *dev = param; | ||
1509 | ++dev->estats.rx_stopped; | ||
1510 | emac_rx_disable_async(dev); | ||
1511 | } | ||
1512 | |||
1513 | /* Hard IRQ */ | ||
1514 | static irqreturn_t emac_irq(int irq, void *dev_instance) | ||
1515 | { | ||
1516 | struct ocp_enet_private *dev = dev_instance; | ||
1517 | struct emac_regs __iomem *p = dev->emacp; | ||
1518 | struct ibm_emac_error_stats *st = &dev->estats; | ||
1519 | |||
1520 | u32 isr = in_be32(&p->isr); | ||
1521 | out_be32(&p->isr, isr); | ||
1522 | |||
1523 | DBG("%d: isr = %08x" NL, dev->def->index, isr); | ||
1524 | |||
1525 | if (isr & EMAC_ISR_TXPE) | ||
1526 | ++st->tx_parity; | ||
1527 | if (isr & EMAC_ISR_RXPE) | ||
1528 | ++st->rx_parity; | ||
1529 | if (isr & EMAC_ISR_TXUE) | ||
1530 | ++st->tx_underrun; | ||
1531 | if (isr & EMAC_ISR_RXOE) | ||
1532 | ++st->rx_fifo_overrun; | ||
1533 | if (isr & EMAC_ISR_OVR) | ||
1534 | ++st->rx_overrun; | ||
1535 | if (isr & EMAC_ISR_BP) | ||
1536 | ++st->rx_bad_packet; | ||
1537 | if (isr & EMAC_ISR_RP) | ||
1538 | ++st->rx_runt_packet; | ||
1539 | if (isr & EMAC_ISR_SE) | ||
1540 | ++st->rx_short_event; | ||
1541 | if (isr & EMAC_ISR_ALE) | ||
1542 | ++st->rx_alignment_error; | ||
1543 | if (isr & EMAC_ISR_BFCS) | ||
1544 | ++st->rx_bad_fcs; | ||
1545 | if (isr & EMAC_ISR_PTLE) | ||
1546 | ++st->rx_packet_too_long; | ||
1547 | if (isr & EMAC_ISR_ORE) | ||
1548 | ++st->rx_out_of_range; | ||
1549 | if (isr & EMAC_ISR_IRE) | ||
1550 | ++st->rx_in_range; | ||
1551 | if (isr & EMAC_ISR_SQE) | ||
1552 | ++st->tx_sqe; | ||
1553 | if (isr & EMAC_ISR_TE) | ||
1554 | ++st->tx_errors; | ||
1555 | |||
1556 | return IRQ_HANDLED; | ||
1557 | } | ||
1558 | |||
1559 | static struct net_device_stats *emac_stats(struct net_device *ndev) | ||
1560 | { | ||
1561 | struct ocp_enet_private *dev = ndev->priv; | ||
1562 | struct ibm_emac_stats *st = &dev->stats; | ||
1563 | struct ibm_emac_error_stats *est = &dev->estats; | ||
1564 | struct net_device_stats *nst = &dev->nstats; | ||
1565 | |||
1566 | DBG2("%d: stats" NL, dev->def->index); | ||
1567 | |||
1568 | /* Compute "legacy" statistics */ | ||
1569 | local_irq_disable(); | ||
1570 | nst->rx_packets = (unsigned long)st->rx_packets; | ||
1571 | nst->rx_bytes = (unsigned long)st->rx_bytes; | ||
1572 | nst->tx_packets = (unsigned long)st->tx_packets; | ||
1573 | nst->tx_bytes = (unsigned long)st->tx_bytes; | ||
1574 | nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + | ||
1575 | est->rx_dropped_error + | ||
1576 | est->rx_dropped_resize + | ||
1577 | est->rx_dropped_mtu); | ||
1578 | nst->tx_dropped = (unsigned long)est->tx_dropped; | ||
1579 | |||
1580 | nst->rx_errors = (unsigned long)est->rx_bd_errors; | ||
1581 | nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + | ||
1582 | est->rx_fifo_overrun + | ||
1583 | est->rx_overrun); | ||
1584 | nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + | ||
1585 | est->rx_alignment_error); | ||
1586 | nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + | ||
1587 | est->rx_bad_fcs); | ||
1588 | nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + | ||
1589 | est->rx_bd_short_event + | ||
1590 | est->rx_bd_packet_too_long + | ||
1591 | est->rx_bd_out_of_range + | ||
1592 | est->rx_bd_in_range + | ||
1593 | est->rx_runt_packet + | ||
1594 | est->rx_short_event + | ||
1595 | est->rx_packet_too_long + | ||
1596 | est->rx_out_of_range + | ||
1597 | est->rx_in_range); | ||
1598 | |||
1599 | nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); | ||
1600 | nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + | ||
1601 | est->tx_underrun); | ||
1602 | nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; | ||
1603 | nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + | ||
1604 | est->tx_bd_excessive_collisions + | ||
1605 | est->tx_bd_late_collision + | ||
1606 | est->tx_bd_multple_collisions); | ||
1607 | local_irq_enable(); | ||
1608 | return nst; | ||
1609 | } | ||
1610 | |||
1611 | static void emac_remove(struct ocp_device *ocpdev) | ||
1612 | { | ||
1613 | struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev); | ||
1614 | |||
1615 | DBG("%d: remove" NL, dev->def->index); | ||
1616 | |||
1617 | ocp_set_drvdata(ocpdev, NULL); | ||
1618 | unregister_netdev(dev->ndev); | ||
1619 | |||
1620 | tah_fini(dev->tah_dev); | ||
1621 | rgmii_fini(dev->rgmii_dev, dev->rgmii_input); | ||
1622 | zmii_fini(dev->zmii_dev, dev->zmii_input); | ||
1623 | |||
1624 | emac_dbg_register(dev->def->index, NULL); | ||
1625 | |||
1626 | mal_unregister_commac(dev->mal, &dev->commac); | ||
1627 | iounmap(dev->emacp); | ||
1628 | kfree(dev->ndev); | ||
1629 | } | ||
1630 | |||
1631 | static struct mal_commac_ops emac_commac_ops = { | ||
1632 | .poll_tx = &emac_poll_tx, | ||
1633 | .poll_rx = &emac_poll_rx, | ||
1634 | .peek_rx = &emac_peek_rx, | ||
1635 | .rxde = &emac_rxde, | ||
1636 | }; | ||
1637 | |||
1638 | static struct mal_commac_ops emac_commac_sg_ops = { | ||
1639 | .poll_tx = &emac_poll_tx, | ||
1640 | .poll_rx = &emac_poll_rx, | ||
1641 | .peek_rx = &emac_peek_rx_sg, | ||
1642 | .rxde = &emac_rxde, | ||
1643 | }; | ||
1644 | |||
1645 | /* Ethtool support */ | ||
1646 | static int emac_ethtool_get_settings(struct net_device *ndev, | ||
1647 | struct ethtool_cmd *cmd) | ||
1648 | { | ||
1649 | struct ocp_enet_private *dev = ndev->priv; | ||
1650 | |||
1651 | cmd->supported = dev->phy.features; | ||
1652 | cmd->port = PORT_MII; | ||
1653 | cmd->phy_address = dev->phy.address; | ||
1654 | cmd->transceiver = | ||
1655 | dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; | ||
1656 | |||
1657 | local_bh_disable(); | ||
1658 | cmd->advertising = dev->phy.advertising; | ||
1659 | cmd->autoneg = dev->phy.autoneg; | ||
1660 | cmd->speed = dev->phy.speed; | ||
1661 | cmd->duplex = dev->phy.duplex; | ||
1662 | local_bh_enable(); | ||
1663 | |||
1664 | return 0; | ||
1665 | } | ||
1666 | |||
1667 | static int emac_ethtool_set_settings(struct net_device *ndev, | ||
1668 | struct ethtool_cmd *cmd) | ||
1669 | { | ||
1670 | struct ocp_enet_private *dev = ndev->priv; | ||
1671 | u32 f = dev->phy.features; | ||
1672 | |||
1673 | DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index, | ||
1674 | cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); | ||
1675 | |||
1676 | /* Basic sanity checks */ | ||
1677 | if (dev->phy.address < 0) | ||
1678 | return -EOPNOTSUPP; | ||
1679 | if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) | ||
1680 | return -EINVAL; | ||
1681 | if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) | ||
1682 | return -EINVAL; | ||
1683 | if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) | ||
1684 | return -EINVAL; | ||
1685 | |||
1686 | if (cmd->autoneg == AUTONEG_DISABLE) { | ||
1687 | switch (cmd->speed) { | ||
1688 | case SPEED_10: | ||
1689 | if (cmd->duplex == DUPLEX_HALF | ||
1690 | && !(f & SUPPORTED_10baseT_Half)) | ||
1691 | return -EINVAL; | ||
1692 | if (cmd->duplex == DUPLEX_FULL | ||
1693 | && !(f & SUPPORTED_10baseT_Full)) | ||
1694 | return -EINVAL; | ||
1695 | break; | ||
1696 | case SPEED_100: | ||
1697 | if (cmd->duplex == DUPLEX_HALF | ||
1698 | && !(f & SUPPORTED_100baseT_Half)) | ||
1699 | return -EINVAL; | ||
1700 | if (cmd->duplex == DUPLEX_FULL | ||
1701 | && !(f & SUPPORTED_100baseT_Full)) | ||
1702 | return -EINVAL; | ||
1703 | break; | ||
1704 | case SPEED_1000: | ||
1705 | if (cmd->duplex == DUPLEX_HALF | ||
1706 | && !(f & SUPPORTED_1000baseT_Half)) | ||
1707 | return -EINVAL; | ||
1708 | if (cmd->duplex == DUPLEX_FULL | ||
1709 | && !(f & SUPPORTED_1000baseT_Full)) | ||
1710 | return -EINVAL; | ||
1711 | break; | ||
1712 | default: | ||
1713 | return -EINVAL; | ||
1714 | } | ||
1715 | |||
1716 | local_bh_disable(); | ||
1717 | dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, | ||
1718 | cmd->duplex); | ||
1719 | |||
1720 | } else { | ||
1721 | if (!(f & SUPPORTED_Autoneg)) | ||
1722 | return -EINVAL; | ||
1723 | |||
1724 | local_bh_disable(); | ||
1725 | dev->phy.def->ops->setup_aneg(&dev->phy, | ||
1726 | (cmd->advertising & f) | | ||
1727 | (dev->phy.advertising & | ||
1728 | (ADVERTISED_Pause | | ||
1729 | ADVERTISED_Asym_Pause))); | ||
1730 | } | ||
1731 | emac_force_link_update(dev); | ||
1732 | local_bh_enable(); | ||
1733 | |||
1734 | return 0; | ||
1735 | } | ||
1736 | |||
1737 | static void emac_ethtool_get_ringparam(struct net_device *ndev, | ||
1738 | struct ethtool_ringparam *rp) | ||
1739 | { | ||
1740 | rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; | ||
1741 | rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; | ||
1742 | } | ||
1743 | |||
1744 | static void emac_ethtool_get_pauseparam(struct net_device *ndev, | ||
1745 | struct ethtool_pauseparam *pp) | ||
1746 | { | ||
1747 | struct ocp_enet_private *dev = ndev->priv; | ||
1748 | |||
1749 | local_bh_disable(); | ||
1750 | if ((dev->phy.features & SUPPORTED_Autoneg) && | ||
1751 | (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) | ||
1752 | pp->autoneg = 1; | ||
1753 | |||
1754 | if (dev->phy.duplex == DUPLEX_FULL) { | ||
1755 | if (dev->phy.pause) | ||
1756 | pp->rx_pause = pp->tx_pause = 1; | ||
1757 | else if (dev->phy.asym_pause) | ||
1758 | pp->tx_pause = 1; | ||
1759 | } | ||
1760 | local_bh_enable(); | ||
1761 | } | ||
1762 | |||
1763 | static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) | ||
1764 | { | ||
1765 | struct ocp_enet_private *dev = ndev->priv; | ||
1766 | return dev->tah_dev != 0; | ||
1767 | } | ||
1768 | |||
1769 | static int emac_get_regs_len(struct ocp_enet_private *dev) | ||
1770 | { | ||
1771 | return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE; | ||
1772 | } | ||
1773 | |||
1774 | static int emac_ethtool_get_regs_len(struct net_device *ndev) | ||
1775 | { | ||
1776 | struct ocp_enet_private *dev = ndev->priv; | ||
1777 | return sizeof(struct emac_ethtool_regs_hdr) + | ||
1778 | emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) + | ||
1779 | zmii_get_regs_len(dev->zmii_dev) + | ||
1780 | rgmii_get_regs_len(dev->rgmii_dev) + | ||
1781 | tah_get_regs_len(dev->tah_dev); | ||
1782 | } | ||
1783 | |||
1784 | static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf) | ||
1785 | { | ||
1786 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
1787 | |||
1788 | hdr->version = EMAC_ETHTOOL_REGS_VER; | ||
1789 | hdr->index = dev->def->index; | ||
1790 | memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE); | ||
1791 | return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE); | ||
1792 | } | ||
1793 | |||
1794 | static void emac_ethtool_get_regs(struct net_device *ndev, | ||
1795 | struct ethtool_regs *regs, void *buf) | ||
1796 | { | ||
1797 | struct ocp_enet_private *dev = ndev->priv; | ||
1798 | struct emac_ethtool_regs_hdr *hdr = buf; | ||
1799 | |||
1800 | hdr->components = 0; | ||
1801 | buf = hdr + 1; | ||
1802 | |||
1803 | local_irq_disable(); | ||
1804 | buf = mal_dump_regs(dev->mal, buf); | ||
1805 | buf = emac_dump_regs(dev, buf); | ||
1806 | if (dev->zmii_dev) { | ||
1807 | hdr->components |= EMAC_ETHTOOL_REGS_ZMII; | ||
1808 | buf = zmii_dump_regs(dev->zmii_dev, buf); | ||
1809 | } | ||
1810 | if (dev->rgmii_dev) { | ||
1811 | hdr->components |= EMAC_ETHTOOL_REGS_RGMII; | ||
1812 | buf = rgmii_dump_regs(dev->rgmii_dev, buf); | ||
1813 | } | ||
1814 | if (dev->tah_dev) { | ||
1815 | hdr->components |= EMAC_ETHTOOL_REGS_TAH; | ||
1816 | buf = tah_dump_regs(dev->tah_dev, buf); | ||
1817 | } | ||
1818 | local_irq_enable(); | ||
1819 | } | ||
1820 | |||
1821 | static int emac_ethtool_nway_reset(struct net_device *ndev) | ||
1822 | { | ||
1823 | struct ocp_enet_private *dev = ndev->priv; | ||
1824 | int res = 0; | ||
1825 | |||
1826 | DBG("%d: nway_reset" NL, dev->def->index); | ||
1827 | |||
1828 | if (dev->phy.address < 0) | ||
1829 | return -EOPNOTSUPP; | ||
1830 | |||
1831 | local_bh_disable(); | ||
1832 | if (!dev->phy.autoneg) { | ||
1833 | res = -EINVAL; | ||
1834 | goto out; | ||
1835 | } | ||
1836 | |||
1837 | dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); | ||
1838 | emac_force_link_update(dev); | ||
1839 | |||
1840 | out: | ||
1841 | local_bh_enable(); | ||
1842 | return res; | ||
1843 | } | ||
1844 | |||
1845 | static int emac_get_sset_count(struct net_device *ndev, int sset) | ||
1846 | { | ||
1847 | switch (sset) { | ||
1848 | case ETH_SS_STATS: | ||
1849 | return EMAC_ETHTOOL_STATS_COUNT; | ||
1850 | default: | ||
1851 | return -EOPNOTSUPP; | ||
1852 | } | ||
1853 | } | ||
1854 | |||
1855 | static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, | ||
1856 | u8 * buf) | ||
1857 | { | ||
1858 | if (stringset == ETH_SS_STATS) | ||
1859 | memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); | ||
1860 | } | ||
1861 | |||
1862 | static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, | ||
1863 | struct ethtool_stats *estats, | ||
1864 | u64 * tmp_stats) | ||
1865 | { | ||
1866 | struct ocp_enet_private *dev = ndev->priv; | ||
1867 | local_irq_disable(); | ||
1868 | memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); | ||
1869 | tmp_stats += sizeof(dev->stats) / sizeof(u64); | ||
1870 | memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); | ||
1871 | local_irq_enable(); | ||
1872 | } | ||
1873 | |||
1874 | static void emac_ethtool_get_drvinfo(struct net_device *ndev, | ||
1875 | struct ethtool_drvinfo *info) | ||
1876 | { | ||
1877 | struct ocp_enet_private *dev = ndev->priv; | ||
1878 | |||
1879 | strcpy(info->driver, "ibm_emac"); | ||
1880 | strcpy(info->version, DRV_VERSION); | ||
1881 | info->fw_version[0] = '\0'; | ||
1882 | sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index); | ||
1883 | info->regdump_len = emac_ethtool_get_regs_len(ndev); | ||
1884 | } | ||
1885 | |||
1886 | static const struct ethtool_ops emac_ethtool_ops = { | ||
1887 | .get_settings = emac_ethtool_get_settings, | ||
1888 | .set_settings = emac_ethtool_set_settings, | ||
1889 | .get_drvinfo = emac_ethtool_get_drvinfo, | ||
1890 | |||
1891 | .get_regs_len = emac_ethtool_get_regs_len, | ||
1892 | .get_regs = emac_ethtool_get_regs, | ||
1893 | |||
1894 | .nway_reset = emac_ethtool_nway_reset, | ||
1895 | |||
1896 | .get_ringparam = emac_ethtool_get_ringparam, | ||
1897 | .get_pauseparam = emac_ethtool_get_pauseparam, | ||
1898 | |||
1899 | .get_rx_csum = emac_ethtool_get_rx_csum, | ||
1900 | |||
1901 | .get_strings = emac_ethtool_get_strings, | ||
1902 | .get_sset_count = emac_get_sset_count, | ||
1903 | .get_ethtool_stats = emac_ethtool_get_ethtool_stats, | ||
1904 | |||
1905 | .get_link = ethtool_op_get_link, | ||
1906 | }; | ||
1907 | |||
1908 | static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) | ||
1909 | { | ||
1910 | struct ocp_enet_private *dev = ndev->priv; | ||
1911 | uint16_t *data = (uint16_t *) & rq->ifr_ifru; | ||
1912 | |||
1913 | DBG("%d: ioctl %08x" NL, dev->def->index, cmd); | ||
1914 | |||
1915 | if (dev->phy.address < 0) | ||
1916 | return -EOPNOTSUPP; | ||
1917 | |||
1918 | switch (cmd) { | ||
1919 | case SIOCGMIIPHY: | ||
1920 | case SIOCDEVPRIVATE: | ||
1921 | data[0] = dev->phy.address; | ||
1922 | /* Fall through */ | ||
1923 | case SIOCGMIIREG: | ||
1924 | case SIOCDEVPRIVATE + 1: | ||
1925 | data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]); | ||
1926 | return 0; | ||
1927 | |||
1928 | case SIOCSMIIREG: | ||
1929 | case SIOCDEVPRIVATE + 2: | ||
1930 | if (!capable(CAP_NET_ADMIN)) | ||
1931 | return -EPERM; | ||
1932 | emac_mdio_write(ndev, dev->phy.address, data[1], data[2]); | ||
1933 | return 0; | ||
1934 | default: | ||
1935 | return -EOPNOTSUPP; | ||
1936 | } | ||
1937 | } | ||
1938 | |||
1939 | static int __init emac_probe(struct ocp_device *ocpdev) | ||
1940 | { | ||
1941 | struct ocp_func_emac_data *emacdata = ocpdev->def->additions; | ||
1942 | struct net_device *ndev; | ||
1943 | struct ocp_device *maldev; | ||
1944 | struct ocp_enet_private *dev; | ||
1945 | int err, i; | ||
1946 | DECLARE_MAC_BUF(mac); | ||
1947 | |||
1948 | DBG("%d: probe" NL, ocpdev->def->index); | ||
1949 | |||
1950 | if (!emacdata) { | ||
1951 | printk(KERN_ERR "emac%d: Missing additional data!\n", | ||
1952 | ocpdev->def->index); | ||
1953 | return -ENODEV; | ||
1954 | } | ||
1955 | |||
1956 | /* Allocate our net_device structure */ | ||
1957 | ndev = alloc_etherdev(sizeof(struct ocp_enet_private)); | ||
1958 | if (!ndev) { | ||
1959 | printk(KERN_ERR "emac%d: could not allocate ethernet device!\n", | ||
1960 | ocpdev->def->index); | ||
1961 | return -ENOMEM; | ||
1962 | } | ||
1963 | dev = ndev->priv; | ||
1964 | dev->ndev = ndev; | ||
1965 | dev->ldev = &ocpdev->dev; | ||
1966 | dev->def = ocpdev->def; | ||
1967 | |||
1968 | /* Find MAL device we are connected to */ | ||
1969 | maldev = | ||
1970 | ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx); | ||
1971 | if (!maldev) { | ||
1972 | printk(KERN_ERR "emac%d: unknown mal%d device!\n", | ||
1973 | dev->def->index, emacdata->mal_idx); | ||
1974 | err = -ENODEV; | ||
1975 | goto out; | ||
1976 | } | ||
1977 | dev->mal = ocp_get_drvdata(maldev); | ||
1978 | if (!dev->mal) { | ||
1979 | printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n", | ||
1980 | dev->def->index, emacdata->mal_idx); | ||
1981 | err = -ENODEV; | ||
1982 | goto out; | ||
1983 | } | ||
1984 | |||
1985 | /* Register with MAL */ | ||
1986 | dev->commac.ops = &emac_commac_ops; | ||
1987 | dev->commac.dev = dev; | ||
1988 | dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan); | ||
1989 | dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan); | ||
1990 | err = mal_register_commac(dev->mal, &dev->commac); | ||
1991 | if (err) { | ||
1992 | printk(KERN_ERR "emac%d: failed to register with mal%d!\n", | ||
1993 | dev->def->index, emacdata->mal_idx); | ||
1994 | goto out; | ||
1995 | } | ||
1996 | dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); | ||
1997 | dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); | ||
1998 | |||
1999 | /* Get pointers to BD rings */ | ||
2000 | dev->tx_desc = | ||
2001 | dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, | ||
2002 | emacdata->mal_tx_chan); | ||
2003 | dev->rx_desc = | ||
2004 | dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, | ||
2005 | emacdata->mal_rx_chan); | ||
2006 | |||
2007 | DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc); | ||
2008 | DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc); | ||
2009 | |||
2010 | /* Clean rings */ | ||
2011 | memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); | ||
2012 | memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); | ||
2013 | |||
2014 | /* If we depend on another EMAC for MDIO, check whether it was probed already */ | ||
2015 | if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) { | ||
2016 | struct ocp_device *mdiodev = | ||
2017 | ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, | ||
2018 | emacdata->mdio_idx); | ||
2019 | if (!mdiodev) { | ||
2020 | printk(KERN_ERR "emac%d: unknown emac%d device!\n", | ||
2021 | dev->def->index, emacdata->mdio_idx); | ||
2022 | err = -ENODEV; | ||
2023 | goto out2; | ||
2024 | } | ||
2025 | dev->mdio_dev = ocp_get_drvdata(mdiodev); | ||
2026 | if (!dev->mdio_dev) { | ||
2027 | printk(KERN_ERR | ||
2028 | "emac%d: emac%d hasn't been initialized yet!\n", | ||
2029 | dev->def->index, emacdata->mdio_idx); | ||
2030 | err = -ENODEV; | ||
2031 | goto out2; | ||
2032 | } | ||
2033 | } | ||
2034 | |||
2035 | /* Attach to ZMII, if needed */ | ||
2036 | if ((err = zmii_attach(dev)) != 0) | ||
2037 | goto out2; | ||
2038 | |||
2039 | /* Attach to RGMII, if needed */ | ||
2040 | if ((err = rgmii_attach(dev)) != 0) | ||
2041 | goto out3; | ||
2042 | |||
2043 | /* Attach to TAH, if needed */ | ||
2044 | if ((err = tah_attach(dev)) != 0) | ||
2045 | goto out4; | ||
2046 | |||
2047 | /* Map EMAC regs */ | ||
2048 | dev->emacp = ioremap(dev->def->paddr, sizeof(struct emac_regs)); | ||
2049 | if (!dev->emacp) { | ||
2050 | printk(KERN_ERR "emac%d: could not ioremap device registers!\n", | ||
2051 | dev->def->index); | ||
2052 | err = -ENOMEM; | ||
2053 | goto out5; | ||
2054 | } | ||
2055 | |||
2056 | /* Fill in MAC address */ | ||
2057 | for (i = 0; i < 6; ++i) | ||
2058 | ndev->dev_addr[i] = emacdata->mac_addr[i]; | ||
2059 | |||
2060 | /* Set some link defaults before we can find out real parameters */ | ||
2061 | dev->phy.speed = SPEED_100; | ||
2062 | dev->phy.duplex = DUPLEX_FULL; | ||
2063 | dev->phy.autoneg = AUTONEG_DISABLE; | ||
2064 | dev->phy.pause = dev->phy.asym_pause = 0; | ||
2065 | dev->stop_timeout = STOP_TIMEOUT_100; | ||
2066 | init_timer(&dev->link_timer); | ||
2067 | dev->link_timer.function = emac_link_timer; | ||
2068 | dev->link_timer.data = (unsigned long)dev; | ||
2069 | |||
2070 | /* Find PHY if any */ | ||
2071 | dev->phy.dev = ndev; | ||
2072 | dev->phy.mode = emacdata->phy_mode; | ||
2073 | if (emacdata->phy_map != 0xffffffff) { | ||
2074 | u32 phy_map = emacdata->phy_map | busy_phy_map; | ||
2075 | u32 adv; | ||
2076 | |||
2077 | DBG("%d: PHY maps %08x %08x" NL, dev->def->index, | ||
2078 | emacdata->phy_map, busy_phy_map); | ||
2079 | |||
2080 | EMAC_RX_CLK_TX(dev->def->index); | ||
2081 | |||
2082 | dev->phy.mdio_read = emac_mdio_read; | ||
2083 | dev->phy.mdio_write = emac_mdio_write; | ||
2084 | |||
2085 | /* Configure EMAC with defaults so we can at least use MDIO | ||
2086 | * This is needed mostly for 440GX | ||
2087 | */ | ||
2088 | if (emac_phy_gpcs(dev->phy.mode)) { | ||
2089 | /* XXX | ||
2090 | * Make GPCS PHY address equal to EMAC index. | ||
2091 | * We probably should take into account busy_phy_map | ||
2092 | * and/or phy_map here. | ||
2093 | */ | ||
2094 | dev->phy.address = dev->def->index; | ||
2095 | } | ||
2096 | |||
2097 | emac_configure(dev); | ||
2098 | |||
2099 | for (i = 0; i < 0x20; phy_map >>= 1, ++i) | ||
2100 | if (!(phy_map & 1)) { | ||
2101 | int r; | ||
2102 | busy_phy_map |= 1 << i; | ||
2103 | |||
2104 | /* Quick check if there is a PHY at the address */ | ||
2105 | r = emac_mdio_read(dev->ndev, i, MII_BMCR); | ||
2106 | if (r == 0xffff || r < 0) | ||
2107 | continue; | ||
2108 | if (!mii_phy_probe(&dev->phy, i)) | ||
2109 | break; | ||
2110 | } | ||
2111 | if (i == 0x20) { | ||
2112 | printk(KERN_WARNING "emac%d: can't find PHY!\n", | ||
2113 | dev->def->index); | ||
2114 | goto out6; | ||
2115 | } | ||
2116 | |||
2117 | /* Init PHY */ | ||
2118 | if (dev->phy.def->ops->init) | ||
2119 | dev->phy.def->ops->init(&dev->phy); | ||
2120 | |||
2121 | /* Disable any PHY features not supported by the platform */ | ||
2122 | dev->phy.def->features &= ~emacdata->phy_feat_exc; | ||
2123 | |||
2124 | /* Setup initial link parameters */ | ||
2125 | if (dev->phy.features & SUPPORTED_Autoneg) { | ||
2126 | adv = dev->phy.features; | ||
2127 | #if !defined(CONFIG_40x) | ||
2128 | adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; | ||
2129 | #endif | ||
2130 | /* Restart autonegotiation */ | ||
2131 | dev->phy.def->ops->setup_aneg(&dev->phy, adv); | ||
2132 | } else { | ||
2133 | u32 f = dev->phy.def->features; | ||
2134 | int speed = SPEED_10, fd = DUPLEX_HALF; | ||
2135 | |||
2136 | /* Select highest supported speed/duplex */ | ||
2137 | if (f & SUPPORTED_1000baseT_Full) { | ||
2138 | speed = SPEED_1000; | ||
2139 | fd = DUPLEX_FULL; | ||
2140 | } else if (f & SUPPORTED_1000baseT_Half) | ||
2141 | speed = SPEED_1000; | ||
2142 | else if (f & SUPPORTED_100baseT_Full) { | ||
2143 | speed = SPEED_100; | ||
2144 | fd = DUPLEX_FULL; | ||
2145 | } else if (f & SUPPORTED_100baseT_Half) | ||
2146 | speed = SPEED_100; | ||
2147 | else if (f & SUPPORTED_10baseT_Full) | ||
2148 | fd = DUPLEX_FULL; | ||
2149 | |||
2150 | /* Force link parameters */ | ||
2151 | dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); | ||
2152 | } | ||
2153 | } else { | ||
2154 | emac_reset(dev); | ||
2155 | |||
2156 | /* PHY-less configuration. | ||
2157 | * XXX I probably should move these settings to emacdata | ||
2158 | */ | ||
2159 | dev->phy.address = -1; | ||
2160 | dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; | ||
2161 | dev->phy.pause = 1; | ||
2162 | } | ||
2163 | |||
2164 | /* Fill in the driver function table */ | ||
2165 | ndev->open = &emac_open; | ||
2166 | if (dev->tah_dev) { | ||
2167 | ndev->hard_start_xmit = &emac_start_xmit_sg; | ||
2168 | ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; | ||
2169 | } else | ||
2170 | ndev->hard_start_xmit = &emac_start_xmit; | ||
2171 | ndev->tx_timeout = &emac_full_tx_reset; | ||
2172 | ndev->watchdog_timeo = 5 * HZ; | ||
2173 | ndev->stop = &emac_close; | ||
2174 | ndev->get_stats = &emac_stats; | ||
2175 | ndev->set_multicast_list = &emac_set_multicast_list; | ||
2176 | ndev->do_ioctl = &emac_ioctl; | ||
2177 | if (emac_phy_supports_gige(emacdata->phy_mode)) { | ||
2178 | ndev->change_mtu = &emac_change_mtu; | ||
2179 | dev->commac.ops = &emac_commac_sg_ops; | ||
2180 | } | ||
2181 | SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); | ||
2182 | |||
2183 | netif_carrier_off(ndev); | ||
2184 | netif_stop_queue(ndev); | ||
2185 | |||
2186 | err = register_netdev(ndev); | ||
2187 | if (err) { | ||
2188 | printk(KERN_ERR "emac%d: failed to register net device (%d)!\n", | ||
2189 | dev->def->index, err); | ||
2190 | goto out6; | ||
2191 | } | ||
2192 | |||
2193 | ocp_set_drvdata(ocpdev, dev); | ||
2194 | |||
2195 | printk("%s: emac%d, MAC %s\n", | ||
2196 | ndev->name, dev->def->index, print_mac(mac, ndev->dev_addr)); | ||
2197 | |||
2198 | if (dev->phy.address >= 0) | ||
2199 | printk("%s: found %s PHY (0x%02x)\n", ndev->name, | ||
2200 | dev->phy.def->name, dev->phy.address); | ||
2201 | |||
2202 | emac_dbg_register(dev->def->index, dev); | ||
2203 | |||
2204 | return 0; | ||
2205 | out6: | ||
2206 | iounmap(dev->emacp); | ||
2207 | out5: | ||
2208 | tah_fini(dev->tah_dev); | ||
2209 | out4: | ||
2210 | rgmii_fini(dev->rgmii_dev, dev->rgmii_input); | ||
2211 | out3: | ||
2212 | zmii_fini(dev->zmii_dev, dev->zmii_input); | ||
2213 | out2: | ||
2214 | mal_unregister_commac(dev->mal, &dev->commac); | ||
2215 | out: | ||
2216 | kfree(ndev); | ||
2217 | return err; | ||
2218 | } | ||
2219 | |||
2220 | static struct ocp_device_id emac_ids[] = { | ||
2221 | { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC }, | ||
2222 | { .vendor = OCP_VENDOR_INVALID} | ||
2223 | }; | ||
2224 | |||
2225 | static struct ocp_driver emac_driver = { | ||
2226 | .name = "emac", | ||
2227 | .id_table = emac_ids, | ||
2228 | .probe = emac_probe, | ||
2229 | .remove = emac_remove, | ||
2230 | }; | ||
2231 | |||
2232 | static int __init emac_init(void) | ||
2233 | { | ||
2234 | printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); | ||
2235 | |||
2236 | DBG(": init" NL); | ||
2237 | |||
2238 | if (mal_init()) | ||
2239 | return -ENODEV; | ||
2240 | |||
2241 | EMAC_CLK_INTERNAL; | ||
2242 | if (ocp_register_driver(&emac_driver)) { | ||
2243 | EMAC_CLK_EXTERNAL; | ||
2244 | ocp_unregister_driver(&emac_driver); | ||
2245 | mal_exit(); | ||
2246 | return -ENODEV; | ||
2247 | } | ||
2248 | EMAC_CLK_EXTERNAL; | ||
2249 | |||
2250 | emac_init_debug(); | ||
2251 | return 0; | ||
2252 | } | ||
2253 | |||
2254 | static void __exit emac_exit(void) | ||
2255 | { | ||
2256 | DBG(": exit" NL); | ||
2257 | ocp_unregister_driver(&emac_driver); | ||
2258 | mal_exit(); | ||
2259 | emac_fini_debug(); | ||
2260 | } | ||
2261 | |||
2262 | module_init(emac_init); | ||
2263 | module_exit(emac_exit); | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h deleted file mode 100644 index dabb94afeb98..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_core.h +++ /dev/null | |||
@@ -1,222 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_core.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Johnnie Peters <jpeters@mvista.com> | ||
12 | * Copyright 2000, 2001 MontaVista Softare Inc. | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify it | ||
15 | * under the terms of the GNU General Public License as published by the | ||
16 | * Free Software Foundation; either version 2 of the License, or (at your | ||
17 | * option) any later version. | ||
18 | * | ||
19 | */ | ||
20 | #ifndef __IBM_EMAC_CORE_H_ | ||
21 | #define __IBM_EMAC_CORE_H_ | ||
22 | |||
23 | #include <linux/netdevice.h> | ||
24 | #include <linux/dma-mapping.h> | ||
25 | #include <asm/ocp.h> | ||
26 | |||
27 | #include "ibm_emac.h" | ||
28 | #include "ibm_emac_phy.h" | ||
29 | #include "ibm_emac_zmii.h" | ||
30 | #include "ibm_emac_rgmii.h" | ||
31 | #include "ibm_emac_mal.h" | ||
32 | #include "ibm_emac_tah.h" | ||
33 | |||
34 | #define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB | ||
35 | #define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB | ||
36 | |||
37 | /* Simple sanity check */ | ||
38 | #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 | ||
39 | #error Invalid number of buffer descriptors (greater than 256) | ||
40 | #endif | ||
41 | |||
42 | // XXX | ||
43 | #define EMAC_MIN_MTU 46 | ||
44 | #define EMAC_MAX_MTU 9000 | ||
45 | |||
46 | /* Maximum L2 header length (VLAN tagged, no FCS) */ | ||
47 | #define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) | ||
48 | |||
49 | /* RX BD size for the given MTU */ | ||
50 | static inline int emac_rx_size(int mtu) | ||
51 | { | ||
52 | if (mtu > ETH_DATA_LEN) | ||
53 | return MAL_MAX_RX_SIZE; | ||
54 | else | ||
55 | return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); | ||
56 | } | ||
57 | |||
58 | #define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) | ||
59 | |||
60 | #define EMAC_RX_SKB_HEADROOM \ | ||
61 | EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM) | ||
62 | |||
63 | /* Size of RX skb for the given MTU */ | ||
64 | static inline int emac_rx_skb_size(int mtu) | ||
65 | { | ||
66 | int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); | ||
67 | return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; | ||
68 | } | ||
69 | |||
70 | /* RX DMA sync size */ | ||
71 | static inline int emac_rx_sync_size(int mtu) | ||
72 | { | ||
73 | return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); | ||
74 | } | ||
75 | |||
76 | /* Driver statistcs is split into two parts to make it more cache friendly: | ||
77 | * - normal statistics (packet count, etc) | ||
78 | * - error statistics | ||
79 | * | ||
80 | * When statistics is requested by ethtool, these parts are concatenated, | ||
81 | * normal one goes first. | ||
82 | * | ||
83 | * Please, keep these structures in sync with emac_stats_keys. | ||
84 | */ | ||
85 | |||
86 | /* Normal TX/RX Statistics */ | ||
87 | struct ibm_emac_stats { | ||
88 | u64 rx_packets; | ||
89 | u64 rx_bytes; | ||
90 | u64 tx_packets; | ||
91 | u64 tx_bytes; | ||
92 | u64 rx_packets_csum; | ||
93 | u64 tx_packets_csum; | ||
94 | }; | ||
95 | |||
96 | /* Error statistics */ | ||
97 | struct ibm_emac_error_stats { | ||
98 | u64 tx_undo; | ||
99 | |||
100 | /* Software RX Errors */ | ||
101 | u64 rx_dropped_stack; | ||
102 | u64 rx_dropped_oom; | ||
103 | u64 rx_dropped_error; | ||
104 | u64 rx_dropped_resize; | ||
105 | u64 rx_dropped_mtu; | ||
106 | u64 rx_stopped; | ||
107 | /* BD reported RX errors */ | ||
108 | u64 rx_bd_errors; | ||
109 | u64 rx_bd_overrun; | ||
110 | u64 rx_bd_bad_packet; | ||
111 | u64 rx_bd_runt_packet; | ||
112 | u64 rx_bd_short_event; | ||
113 | u64 rx_bd_alignment_error; | ||
114 | u64 rx_bd_bad_fcs; | ||
115 | u64 rx_bd_packet_too_long; | ||
116 | u64 rx_bd_out_of_range; | ||
117 | u64 rx_bd_in_range; | ||
118 | /* EMAC IRQ reported RX errors */ | ||
119 | u64 rx_parity; | ||
120 | u64 rx_fifo_overrun; | ||
121 | u64 rx_overrun; | ||
122 | u64 rx_bad_packet; | ||
123 | u64 rx_runt_packet; | ||
124 | u64 rx_short_event; | ||
125 | u64 rx_alignment_error; | ||
126 | u64 rx_bad_fcs; | ||
127 | u64 rx_packet_too_long; | ||
128 | u64 rx_out_of_range; | ||
129 | u64 rx_in_range; | ||
130 | |||
131 | /* Software TX Errors */ | ||
132 | u64 tx_dropped; | ||
133 | /* BD reported TX errors */ | ||
134 | u64 tx_bd_errors; | ||
135 | u64 tx_bd_bad_fcs; | ||
136 | u64 tx_bd_carrier_loss; | ||
137 | u64 tx_bd_excessive_deferral; | ||
138 | u64 tx_bd_excessive_collisions; | ||
139 | u64 tx_bd_late_collision; | ||
140 | u64 tx_bd_multple_collisions; | ||
141 | u64 tx_bd_single_collision; | ||
142 | u64 tx_bd_underrun; | ||
143 | u64 tx_bd_sqe; | ||
144 | /* EMAC IRQ reported TX errors */ | ||
145 | u64 tx_parity; | ||
146 | u64 tx_underrun; | ||
147 | u64 tx_sqe; | ||
148 | u64 tx_errors; | ||
149 | }; | ||
150 | |||
151 | #define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \ | ||
152 | sizeof(struct ibm_emac_error_stats)) \ | ||
153 | / sizeof(u64)) | ||
154 | |||
155 | struct ocp_enet_private { | ||
156 | struct net_device *ndev; /* 0 */ | ||
157 | struct emac_regs __iomem *emacp; | ||
158 | |||
159 | struct mal_descriptor *tx_desc; | ||
160 | int tx_cnt; | ||
161 | int tx_slot; | ||
162 | int ack_slot; | ||
163 | |||
164 | struct mal_descriptor *rx_desc; | ||
165 | int rx_slot; | ||
166 | struct sk_buff *rx_sg_skb; /* 1 */ | ||
167 | int rx_skb_size; | ||
168 | int rx_sync_size; | ||
169 | |||
170 | struct ibm_emac_stats stats; | ||
171 | struct ocp_device *tah_dev; | ||
172 | |||
173 | struct ibm_ocp_mal *mal; | ||
174 | struct mal_commac commac; | ||
175 | |||
176 | struct sk_buff *tx_skb[NUM_TX_BUFF]; | ||
177 | struct sk_buff *rx_skb[NUM_RX_BUFF]; | ||
178 | |||
179 | struct ocp_device *zmii_dev; | ||
180 | int zmii_input; | ||
181 | struct ocp_enet_private *mdio_dev; | ||
182 | struct ocp_device *rgmii_dev; | ||
183 | int rgmii_input; | ||
184 | |||
185 | struct ocp_def *def; | ||
186 | |||
187 | struct mii_phy phy; | ||
188 | struct timer_list link_timer; | ||
189 | int reset_failed; | ||
190 | |||
191 | int stop_timeout; /* in us */ | ||
192 | |||
193 | struct ibm_emac_error_stats estats; | ||
194 | struct net_device_stats nstats; | ||
195 | |||
196 | struct device* ldev; | ||
197 | }; | ||
198 | |||
199 | /* Ethtool get_regs complex data. | ||
200 | * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH | ||
201 | * when available. | ||
202 | * | ||
203 | * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, | ||
204 | * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. | ||
205 | * Each register component is preceded with emac_ethtool_regs_subhdr. | ||
206 | * Order of the optional headers follows their relative bit posititions | ||
207 | * in emac_ethtool_regs_hdr.components | ||
208 | */ | ||
209 | #define EMAC_ETHTOOL_REGS_ZMII 0x00000001 | ||
210 | #define EMAC_ETHTOOL_REGS_RGMII 0x00000002 | ||
211 | #define EMAC_ETHTOOL_REGS_TAH 0x00000004 | ||
212 | |||
213 | struct emac_ethtool_regs_hdr { | ||
214 | u32 components; | ||
215 | }; | ||
216 | |||
217 | struct emac_ethtool_regs_subhdr { | ||
218 | u32 version; | ||
219 | u32 index; | ||
220 | }; | ||
221 | |||
222 | #endif /* __IBM_EMAC_CORE_H_ */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c deleted file mode 100644 index 1f70906cfb98..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_debug.c +++ /dev/null | |||
@@ -1,211 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_debug.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | * | ||
14 | */ | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/module.h> | ||
17 | #include <linux/kernel.h> | ||
18 | #include <linux/netdevice.h> | ||
19 | #include <linux/sysrq.h> | ||
20 | #include <asm/io.h> | ||
21 | |||
22 | #include "ibm_emac_core.h" | ||
23 | |||
24 | static void emac_desc_dump(int idx, struct ocp_enet_private *p) | ||
25 | { | ||
26 | int i; | ||
27 | printk("** EMAC%d TX BDs **\n" | ||
28 | " tx_cnt = %d tx_slot = %d ack_slot = %d\n", | ||
29 | idx, p->tx_cnt, p->tx_slot, p->ack_slot); | ||
30 | for (i = 0; i < NUM_TX_BUFF / 2; ++i) | ||
31 | printk | ||
32 | ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", | ||
33 | i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ', | ||
34 | p->tx_desc[i].ctrl, p->tx_desc[i].data_len, | ||
35 | NUM_TX_BUFF / 2 + i, | ||
36 | p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr, | ||
37 | p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ', | ||
38 | p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl, | ||
39 | p->tx_desc[NUM_TX_BUFF / 2 + i].data_len); | ||
40 | |||
41 | printk("** EMAC%d RX BDs **\n" | ||
42 | " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n" | ||
43 | " rx_sg_skb = 0x%p\n", | ||
44 | idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size, | ||
45 | p->rx_sync_size, p->rx_sg_skb); | ||
46 | for (i = 0; i < NUM_RX_BUFF / 2; ++i) | ||
47 | printk | ||
48 | ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", | ||
49 | i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ', | ||
50 | p->rx_desc[i].ctrl, p->rx_desc[i].data_len, | ||
51 | NUM_RX_BUFF / 2 + i, | ||
52 | p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr, | ||
53 | p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ', | ||
54 | p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl, | ||
55 | p->rx_desc[NUM_RX_BUFF / 2 + i].data_len); | ||
56 | } | ||
57 | |||
58 | static void emac_mac_dump(int idx, struct ocp_enet_private *dev) | ||
59 | { | ||
60 | struct emac_regs __iomem *p = dev->emacp; | ||
61 | |||
62 | printk("** EMAC%d registers **\n" | ||
63 | "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n" | ||
64 | "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n" | ||
65 | "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n" | ||
66 | "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x " | ||
67 | "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n" | ||
68 | "LSA = %04x%08x IPGVR = 0x%04x\n" | ||
69 | "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n" | ||
70 | "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n", | ||
71 | idx, in_be32(&p->mr0), in_be32(&p->mr1), | ||
72 | in_be32(&p->tmr0), in_be32(&p->tmr1), | ||
73 | in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser), | ||
74 | in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid), | ||
75 | in_be32(&p->vtci), | ||
76 | in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3), | ||
77 | in_be32(&p->iaht4), | ||
78 | in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3), | ||
79 | in_be32(&p->gaht4), | ||
80 | in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr), | ||
81 | in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr), | ||
82 | in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr) | ||
83 | ); | ||
84 | |||
85 | emac_desc_dump(idx, dev); | ||
86 | } | ||
87 | |||
88 | static void emac_mal_dump(struct ibm_ocp_mal *mal) | ||
89 | { | ||
90 | struct ocp_func_mal_data *maldata = mal->def->additions; | ||
91 | int i; | ||
92 | |||
93 | printk("** MAL%d Registers **\n" | ||
94 | "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n" | ||
95 | "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n" | ||
96 | "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n", | ||
97 | mal->def->index, | ||
98 | get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR), | ||
99 | get_mal_dcrn(mal, MAL_IER), | ||
100 | get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR), | ||
101 | get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR), | ||
102 | get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR), | ||
103 | get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR) | ||
104 | ); | ||
105 | |||
106 | printk("TX|"); | ||
107 | for (i = 0; i < maldata->num_tx_chans; ++i) { | ||
108 | if (i && !(i % 4)) | ||
109 | printk("\n "); | ||
110 | printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i))); | ||
111 | } | ||
112 | printk("\nRX|"); | ||
113 | for (i = 0; i < maldata->num_rx_chans; ++i) { | ||
114 | if (i && !(i % 4)) | ||
115 | printk("\n "); | ||
116 | printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i))); | ||
117 | } | ||
118 | printk("\n "); | ||
119 | for (i = 0; i < maldata->num_rx_chans; ++i) { | ||
120 | u32 r = get_mal_dcrn(mal, MAL_RCBS(i)); | ||
121 | if (i && !(i % 3)) | ||
122 | printk("\n "); | ||
123 | printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16); | ||
124 | } | ||
125 | printk("\n"); | ||
126 | } | ||
127 | |||
128 | static struct ocp_enet_private *__emacs[4]; | ||
129 | static struct ibm_ocp_mal *__mals[1]; | ||
130 | |||
131 | void emac_dbg_register(int idx, struct ocp_enet_private *dev) | ||
132 | { | ||
133 | unsigned long flags; | ||
134 | |||
135 | if (idx >= ARRAY_SIZE(__emacs)) { | ||
136 | printk(KERN_WARNING | ||
137 | "invalid index %d when registering EMAC for debugging\n", | ||
138 | idx); | ||
139 | return; | ||
140 | } | ||
141 | |||
142 | local_irq_save(flags); | ||
143 | __emacs[idx] = dev; | ||
144 | local_irq_restore(flags); | ||
145 | } | ||
146 | |||
147 | void mal_dbg_register(int idx, struct ibm_ocp_mal *mal) | ||
148 | { | ||
149 | unsigned long flags; | ||
150 | |||
151 | if (idx >= ARRAY_SIZE(__mals)) { | ||
152 | printk(KERN_WARNING | ||
153 | "invalid index %d when registering MAL for debugging\n", | ||
154 | idx); | ||
155 | return; | ||
156 | } | ||
157 | |||
158 | local_irq_save(flags); | ||
159 | __mals[idx] = mal; | ||
160 | local_irq_restore(flags); | ||
161 | } | ||
162 | |||
163 | void emac_dbg_dump_all(void) | ||
164 | { | ||
165 | unsigned int i; | ||
166 | unsigned long flags; | ||
167 | |||
168 | local_irq_save(flags); | ||
169 | |||
170 | for (i = 0; i < ARRAY_SIZE(__mals); ++i) | ||
171 | if (__mals[i]) | ||
172 | emac_mal_dump(__mals[i]); | ||
173 | |||
174 | for (i = 0; i < ARRAY_SIZE(__emacs); ++i) | ||
175 | if (__emacs[i]) | ||
176 | emac_mac_dump(i, __emacs[i]); | ||
177 | |||
178 | local_irq_restore(flags); | ||
179 | } | ||
180 | |||
181 | #if defined(CONFIG_MAGIC_SYSRQ) | ||
182 | static void emac_sysrq_handler(int key, struct tty_struct *tty) | ||
183 | { | ||
184 | emac_dbg_dump_all(); | ||
185 | } | ||
186 | |||
187 | static struct sysrq_key_op emac_sysrq_op = { | ||
188 | .handler = emac_sysrq_handler, | ||
189 | .help_msg = "emaC", | ||
190 | .action_msg = "Show EMAC(s) status", | ||
191 | }; | ||
192 | |||
193 | int __init emac_init_debug(void) | ||
194 | { | ||
195 | return register_sysrq_key('c', &emac_sysrq_op); | ||
196 | } | ||
197 | |||
198 | void __exit emac_fini_debug(void) | ||
199 | { | ||
200 | unregister_sysrq_key('c', &emac_sysrq_op); | ||
201 | } | ||
202 | |||
203 | #else | ||
204 | int __init emac_init_debug(void) | ||
205 | { | ||
206 | return 0; | ||
207 | } | ||
208 | void __exit emac_fini_debug(void) | ||
209 | { | ||
210 | } | ||
211 | #endif /* CONFIG_MAGIC_SYSRQ */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h deleted file mode 100644 index 6c7dccc84bf5..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_debug.h +++ /dev/null | |||
@@ -1,62 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_debug.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | * | ||
14 | */ | ||
15 | #ifndef __IBM_EMAC_DEBUG_H_ | ||
16 | #define __IBM_EMAC_DEBUG_H_ | ||
17 | |||
18 | #include <linux/init.h> | ||
19 | #include "ibm_emac_core.h" | ||
20 | #include "ibm_emac_mal.h" | ||
21 | |||
22 | #if defined(CONFIG_IBM_EMAC_DEBUG) | ||
23 | void emac_dbg_register(int idx, struct ocp_enet_private *dev); | ||
24 | void mal_dbg_register(int idx, struct ibm_ocp_mal *mal); | ||
25 | int emac_init_debug(void) __init; | ||
26 | void emac_fini_debug(void) __exit; | ||
27 | void emac_dbg_dump_all(void); | ||
28 | # define DBG_LEVEL 1 | ||
29 | #else | ||
30 | # define emac_dbg_register(x,y) ((void)0) | ||
31 | # define mal_dbg_register(x,y) ((void)0) | ||
32 | # define emac_init_debug() ((void)0) | ||
33 | # define emac_fini_debug() ((void)0) | ||
34 | # define emac_dbg_dump_all() ((void)0) | ||
35 | # define DBG_LEVEL 0 | ||
36 | #endif | ||
37 | |||
38 | #if DBG_LEVEL > 0 | ||
39 | # define DBG(f,x...) printk("emac" f, ##x) | ||
40 | # define MAL_DBG(f,x...) printk("mal" f, ##x) | ||
41 | # define ZMII_DBG(f,x...) printk("zmii" f, ##x) | ||
42 | # define RGMII_DBG(f,x...) printk("rgmii" f, ##x) | ||
43 | # define NL "\n" | ||
44 | #else | ||
45 | # define DBG(f,x...) ((void)0) | ||
46 | # define MAL_DBG(f,x...) ((void)0) | ||
47 | # define ZMII_DBG(f,x...) ((void)0) | ||
48 | # define RGMII_DBG(f,x...) ((void)0) | ||
49 | #endif | ||
50 | #if DBG_LEVEL > 1 | ||
51 | # define DBG2(f,x...) DBG(f, ##x) | ||
52 | # define MAL_DBG2(f,x...) MAL_DBG(f, ##x) | ||
53 | # define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x) | ||
54 | # define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x) | ||
55 | #else | ||
56 | # define DBG2(f,x...) ((void)0) | ||
57 | # define MAL_DBG2(f,x...) ((void)0) | ||
58 | # define ZMII_DBG2(f,x...) ((void)0) | ||
59 | # define RGMII_DBG2(f,x...) ((void)0) | ||
60 | #endif | ||
61 | |||
62 | #endif /* __IBM_EMAC_DEBUG_H_ */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c deleted file mode 100644 index dcd8826fc749..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_mal.c +++ /dev/null | |||
@@ -1,570 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_mal.c | ||
3 | * | ||
4 | * Memory Access Layer (MAL) support | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Benjamin Herrenschmidt <benh@kernel.crashing.org>, | ||
11 | * David Gibson <hermes@gibson.dropbear.id.au>, | ||
12 | * | ||
13 | * Armin Kuster <akuster@mvista.com> | ||
14 | * Copyright 2002 MontaVista Softare Inc. | ||
15 | * | ||
16 | * This program is free software; you can redistribute it and/or modify it | ||
17 | * under the terms of the GNU General Public License as published by the | ||
18 | * Free Software Foundation; either version 2 of the License, or (at your | ||
19 | * option) any later version. | ||
20 | * | ||
21 | */ | ||
22 | #include <linux/module.h> | ||
23 | #include <linux/kernel.h> | ||
24 | #include <linux/errno.h> | ||
25 | #include <linux/netdevice.h> | ||
26 | #include <linux/init.h> | ||
27 | #include <linux/interrupt.h> | ||
28 | #include <linux/dma-mapping.h> | ||
29 | |||
30 | #include <asm/ocp.h> | ||
31 | |||
32 | #include "ibm_emac_core.h" | ||
33 | #include "ibm_emac_mal.h" | ||
34 | #include "ibm_emac_debug.h" | ||
35 | |||
36 | int __init mal_register_commac(struct ibm_ocp_mal *mal, | ||
37 | struct mal_commac *commac) | ||
38 | { | ||
39 | unsigned long flags; | ||
40 | local_irq_save(flags); | ||
41 | |||
42 | MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index, | ||
43 | commac->tx_chan_mask, commac->rx_chan_mask); | ||
44 | |||
45 | /* Don't let multiple commacs claim the same channel(s) */ | ||
46 | if ((mal->tx_chan_mask & commac->tx_chan_mask) || | ||
47 | (mal->rx_chan_mask & commac->rx_chan_mask)) { | ||
48 | local_irq_restore(flags); | ||
49 | printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n", | ||
50 | mal->def->index); | ||
51 | return -EBUSY; | ||
52 | } | ||
53 | |||
54 | mal->tx_chan_mask |= commac->tx_chan_mask; | ||
55 | mal->rx_chan_mask |= commac->rx_chan_mask; | ||
56 | list_add(&commac->list, &mal->list); | ||
57 | |||
58 | local_irq_restore(flags); | ||
59 | return 0; | ||
60 | } | ||
61 | |||
62 | void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) | ||
63 | { | ||
64 | unsigned long flags; | ||
65 | local_irq_save(flags); | ||
66 | |||
67 | MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index, | ||
68 | commac->tx_chan_mask, commac->rx_chan_mask); | ||
69 | |||
70 | mal->tx_chan_mask &= ~commac->tx_chan_mask; | ||
71 | mal->rx_chan_mask &= ~commac->rx_chan_mask; | ||
72 | list_del_init(&commac->list); | ||
73 | |||
74 | local_irq_restore(flags); | ||
75 | } | ||
76 | |||
77 | int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size) | ||
78 | { | ||
79 | struct ocp_func_mal_data *maldata = mal->def->additions; | ||
80 | BUG_ON(channel < 0 || channel >= maldata->num_rx_chans || | ||
81 | size > MAL_MAX_RX_SIZE); | ||
82 | |||
83 | MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size); | ||
84 | |||
85 | if (size & 0xf) { | ||
86 | printk(KERN_WARNING | ||
87 | "mal%d: incorrect RX size %lu for the channel %d\n", | ||
88 | mal->def->index, size, channel); | ||
89 | return -EINVAL; | ||
90 | } | ||
91 | |||
92 | set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4); | ||
93 | return 0; | ||
94 | } | ||
95 | |||
96 | int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel) | ||
97 | { | ||
98 | struct ocp_func_mal_data *maldata = mal->def->additions; | ||
99 | BUG_ON(channel < 0 || channel >= maldata->num_tx_chans); | ||
100 | return channel * NUM_TX_BUFF; | ||
101 | } | ||
102 | |||
103 | int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel) | ||
104 | { | ||
105 | struct ocp_func_mal_data *maldata = mal->def->additions; | ||
106 | BUG_ON(channel < 0 || channel >= maldata->num_rx_chans); | ||
107 | return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF; | ||
108 | } | ||
109 | |||
110 | void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel) | ||
111 | { | ||
112 | local_bh_disable(); | ||
113 | MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel); | ||
114 | set_mal_dcrn(mal, MAL_TXCASR, | ||
115 | get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel)); | ||
116 | local_bh_enable(); | ||
117 | } | ||
118 | |||
119 | void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel) | ||
120 | { | ||
121 | set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel)); | ||
122 | MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel); | ||
123 | } | ||
124 | |||
125 | void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel) | ||
126 | { | ||
127 | local_bh_disable(); | ||
128 | MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel); | ||
129 | set_mal_dcrn(mal, MAL_RXCASR, | ||
130 | get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel)); | ||
131 | local_bh_enable(); | ||
132 | } | ||
133 | |||
134 | void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel) | ||
135 | { | ||
136 | set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel)); | ||
137 | MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel); | ||
138 | } | ||
139 | |||
140 | void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac) | ||
141 | { | ||
142 | local_bh_disable(); | ||
143 | MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac); | ||
144 | list_add_tail(&commac->poll_list, &mal->poll_list); | ||
145 | local_bh_enable(); | ||
146 | } | ||
147 | |||
148 | void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac) | ||
149 | { | ||
150 | local_bh_disable(); | ||
151 | MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac); | ||
152 | list_del(&commac->poll_list); | ||
153 | local_bh_enable(); | ||
154 | } | ||
155 | |||
156 | /* synchronized by mal_poll() */ | ||
157 | static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal) | ||
158 | { | ||
159 | MAL_DBG2("%d: enable_irq" NL, mal->def->index); | ||
160 | set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE); | ||
161 | } | ||
162 | |||
163 | /* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */ | ||
164 | static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal) | ||
165 | { | ||
166 | set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE); | ||
167 | MAL_DBG2("%d: disable_irq" NL, mal->def->index); | ||
168 | } | ||
169 | |||
170 | static irqreturn_t mal_serr(int irq, void *dev_instance) | ||
171 | { | ||
172 | struct ibm_ocp_mal *mal = dev_instance; | ||
173 | u32 esr = get_mal_dcrn(mal, MAL_ESR); | ||
174 | |||
175 | /* Clear the error status register */ | ||
176 | set_mal_dcrn(mal, MAL_ESR, esr); | ||
177 | |||
178 | MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr); | ||
179 | |||
180 | if (esr & MAL_ESR_EVB) { | ||
181 | if (esr & MAL_ESR_DE) { | ||
182 | /* We ignore Descriptor error, | ||
183 | * TXDE or RXDE interrupt will be generated anyway. | ||
184 | */ | ||
185 | return IRQ_HANDLED; | ||
186 | } | ||
187 | |||
188 | if (esr & MAL_ESR_PEIN) { | ||
189 | /* PLB error, it's probably buggy hardware or | ||
190 | * incorrect physical address in BD (i.e. bug) | ||
191 | */ | ||
192 | if (net_ratelimit()) | ||
193 | printk(KERN_ERR | ||
194 | "mal%d: system error, PLB (ESR = 0x%08x)\n", | ||
195 | mal->def->index, esr); | ||
196 | return IRQ_HANDLED; | ||
197 | } | ||
198 | |||
199 | /* OPB error, it's probably buggy hardware or incorrect EBC setup */ | ||
200 | if (net_ratelimit()) | ||
201 | printk(KERN_ERR | ||
202 | "mal%d: system error, OPB (ESR = 0x%08x)\n", | ||
203 | mal->def->index, esr); | ||
204 | } | ||
205 | return IRQ_HANDLED; | ||
206 | } | ||
207 | |||
208 | static inline void mal_schedule_poll(struct ibm_ocp_mal *mal) | ||
209 | { | ||
210 | if (likely(napi_schedule_prep(&mal->napi))) { | ||
211 | MAL_DBG2("%d: schedule_poll" NL, mal->def->index); | ||
212 | mal_disable_eob_irq(mal); | ||
213 | __napi_schedule(&mal->napi); | ||
214 | } else | ||
215 | MAL_DBG2("%d: already in poll" NL, mal->def->index); | ||
216 | } | ||
217 | |||
218 | static irqreturn_t mal_txeob(int irq, void *dev_instance) | ||
219 | { | ||
220 | struct ibm_ocp_mal *mal = dev_instance; | ||
221 | u32 r = get_mal_dcrn(mal, MAL_TXEOBISR); | ||
222 | MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r); | ||
223 | mal_schedule_poll(mal); | ||
224 | set_mal_dcrn(mal, MAL_TXEOBISR, r); | ||
225 | return IRQ_HANDLED; | ||
226 | } | ||
227 | |||
228 | static irqreturn_t mal_rxeob(int irq, void *dev_instance) | ||
229 | { | ||
230 | struct ibm_ocp_mal *mal = dev_instance; | ||
231 | u32 r = get_mal_dcrn(mal, MAL_RXEOBISR); | ||
232 | MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r); | ||
233 | mal_schedule_poll(mal); | ||
234 | set_mal_dcrn(mal, MAL_RXEOBISR, r); | ||
235 | return IRQ_HANDLED; | ||
236 | } | ||
237 | |||
238 | static irqreturn_t mal_txde(int irq, void *dev_instance) | ||
239 | { | ||
240 | struct ibm_ocp_mal *mal = dev_instance; | ||
241 | u32 deir = get_mal_dcrn(mal, MAL_TXDEIR); | ||
242 | set_mal_dcrn(mal, MAL_TXDEIR, deir); | ||
243 | |||
244 | MAL_DBG("%d: txde %08x" NL, mal->def->index, deir); | ||
245 | |||
246 | if (net_ratelimit()) | ||
247 | printk(KERN_ERR | ||
248 | "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n", | ||
249 | mal->def->index, deir); | ||
250 | |||
251 | return IRQ_HANDLED; | ||
252 | } | ||
253 | |||
254 | static irqreturn_t mal_rxde(int irq, void *dev_instance) | ||
255 | { | ||
256 | struct ibm_ocp_mal *mal = dev_instance; | ||
257 | struct list_head *l; | ||
258 | u32 deir = get_mal_dcrn(mal, MAL_RXDEIR); | ||
259 | |||
260 | MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir); | ||
261 | |||
262 | list_for_each(l, &mal->list) { | ||
263 | struct mal_commac *mc = list_entry(l, struct mal_commac, list); | ||
264 | if (deir & mc->rx_chan_mask) { | ||
265 | mc->rx_stopped = 1; | ||
266 | mc->ops->rxde(mc->dev); | ||
267 | } | ||
268 | } | ||
269 | |||
270 | mal_schedule_poll(mal); | ||
271 | set_mal_dcrn(mal, MAL_RXDEIR, deir); | ||
272 | |||
273 | return IRQ_HANDLED; | ||
274 | } | ||
275 | |||
276 | static int mal_poll(struct napi_struct *napi, int budget) | ||
277 | { | ||
278 | struct ibm_ocp_mal *mal = container_of(napi, struct ibm_ocp_mal, napi); | ||
279 | struct list_head *l; | ||
280 | int received = 0; | ||
281 | |||
282 | MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget, | ||
283 | rx_work_limit); | ||
284 | again: | ||
285 | /* Process TX skbs */ | ||
286 | list_for_each(l, &mal->poll_list) { | ||
287 | struct mal_commac *mc = | ||
288 | list_entry(l, struct mal_commac, poll_list); | ||
289 | mc->ops->poll_tx(mc->dev); | ||
290 | } | ||
291 | |||
292 | /* Process RX skbs. | ||
293 | * We _might_ need something more smart here to enforce polling fairness. | ||
294 | */ | ||
295 | list_for_each(l, &mal->poll_list) { | ||
296 | struct mal_commac *mc = | ||
297 | list_entry(l, struct mal_commac, poll_list); | ||
298 | int n = mc->ops->poll_rx(mc->dev, budget); | ||
299 | if (n) { | ||
300 | received += n; | ||
301 | budget -= n; | ||
302 | if (budget <= 0) | ||
303 | goto more_work; // XXX What if this is the last one ? | ||
304 | } | ||
305 | } | ||
306 | |||
307 | /* We need to disable IRQs to protect from RXDE IRQ here */ | ||
308 | local_irq_disable(); | ||
309 | __napi_complete(napi); | ||
310 | mal_enable_eob_irq(mal); | ||
311 | local_irq_enable(); | ||
312 | |||
313 | /* Check for "rotting" packet(s) */ | ||
314 | list_for_each(l, &mal->poll_list) { | ||
315 | struct mal_commac *mc = | ||
316 | list_entry(l, struct mal_commac, poll_list); | ||
317 | if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) { | ||
318 | MAL_DBG2("%d: rotting packet" NL, mal->def->index); | ||
319 | if (napi_reschedule(napi)) | ||
320 | mal_disable_eob_irq(mal); | ||
321 | else | ||
322 | MAL_DBG2("%d: already in poll list" NL, | ||
323 | mal->def->index); | ||
324 | |||
325 | if (budget > 0) | ||
326 | goto again; | ||
327 | else | ||
328 | goto more_work; | ||
329 | } | ||
330 | mc->ops->poll_tx(mc->dev); | ||
331 | } | ||
332 | |||
333 | more_work: | ||
334 | MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, budget, received); | ||
335 | return received; | ||
336 | } | ||
337 | |||
338 | static void mal_reset(struct ibm_ocp_mal *mal) | ||
339 | { | ||
340 | int n = 10; | ||
341 | MAL_DBG("%d: reset" NL, mal->def->index); | ||
342 | |||
343 | set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR); | ||
344 | |||
345 | /* Wait for reset to complete (1 system clock) */ | ||
346 | while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n) | ||
347 | --n; | ||
348 | |||
349 | if (unlikely(!n)) | ||
350 | printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index); | ||
351 | } | ||
352 | |||
353 | int mal_get_regs_len(struct ibm_ocp_mal *mal) | ||
354 | { | ||
355 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
356 | sizeof(struct ibm_mal_regs); | ||
357 | } | ||
358 | |||
359 | void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf) | ||
360 | { | ||
361 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
362 | struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1); | ||
363 | struct ocp_func_mal_data *maldata = mal->def->additions; | ||
364 | int i; | ||
365 | |||
366 | hdr->version = MAL_VERSION; | ||
367 | hdr->index = mal->def->index; | ||
368 | |||
369 | regs->tx_count = maldata->num_tx_chans; | ||
370 | regs->rx_count = maldata->num_rx_chans; | ||
371 | |||
372 | regs->cfg = get_mal_dcrn(mal, MAL_CFG); | ||
373 | regs->esr = get_mal_dcrn(mal, MAL_ESR); | ||
374 | regs->ier = get_mal_dcrn(mal, MAL_IER); | ||
375 | regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR); | ||
376 | regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR); | ||
377 | regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR); | ||
378 | regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR); | ||
379 | regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR); | ||
380 | regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR); | ||
381 | regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR); | ||
382 | regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR); | ||
383 | |||
384 | for (i = 0; i < regs->tx_count; ++i) | ||
385 | regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i)); | ||
386 | |||
387 | for (i = 0; i < regs->rx_count; ++i) { | ||
388 | regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i)); | ||
389 | regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i)); | ||
390 | } | ||
391 | return regs + 1; | ||
392 | } | ||
393 | |||
394 | static int __init mal_probe(struct ocp_device *ocpdev) | ||
395 | { | ||
396 | struct ibm_ocp_mal *mal; | ||
397 | struct ocp_func_mal_data *maldata; | ||
398 | int err = 0, i, bd_size; | ||
399 | |||
400 | MAL_DBG("%d: probe" NL, ocpdev->def->index); | ||
401 | |||
402 | maldata = ocpdev->def->additions; | ||
403 | if (maldata == NULL) { | ||
404 | printk(KERN_ERR "mal%d: missing additional data!\n", | ||
405 | ocpdev->def->index); | ||
406 | return -ENODEV; | ||
407 | } | ||
408 | |||
409 | mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL); | ||
410 | if (!mal) { | ||
411 | printk(KERN_ERR | ||
412 | "mal%d: out of memory allocating MAL structure!\n", | ||
413 | ocpdev->def->index); | ||
414 | return -ENOMEM; | ||
415 | } | ||
416 | |||
417 | /* XXX This only works for native dcr for now */ | ||
418 | mal->dcrhost = dcr_map(NULL, maldata->dcr_base, 0); | ||
419 | |||
420 | mal->def = ocpdev->def; | ||
421 | |||
422 | INIT_LIST_HEAD(&mal->poll_list); | ||
423 | mal->napi.weight = CONFIG_IBM_EMAC_POLL_WEIGHT; | ||
424 | mal->napi.poll = mal_poll; | ||
425 | |||
426 | INIT_LIST_HEAD(&mal->list); | ||
427 | |||
428 | /* Load power-on reset defaults */ | ||
429 | mal_reset(mal); | ||
430 | |||
431 | /* Set the MAL configuration register */ | ||
432 | set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB | | ||
433 | MAL_CFG_OPBBL | MAL_CFG_LEA); | ||
434 | |||
435 | mal_enable_eob_irq(mal); | ||
436 | |||
437 | /* Allocate space for BD rings */ | ||
438 | BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32); | ||
439 | BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32); | ||
440 | bd_size = sizeof(struct mal_descriptor) * | ||
441 | (NUM_TX_BUFF * maldata->num_tx_chans + | ||
442 | NUM_RX_BUFF * maldata->num_rx_chans); | ||
443 | mal->bd_virt = | ||
444 | dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL); | ||
445 | |||
446 | if (!mal->bd_virt) { | ||
447 | printk(KERN_ERR | ||
448 | "mal%d: out of memory allocating RX/TX descriptors!\n", | ||
449 | mal->def->index); | ||
450 | err = -ENOMEM; | ||
451 | goto fail; | ||
452 | } | ||
453 | memset(mal->bd_virt, 0, bd_size); | ||
454 | |||
455 | for (i = 0; i < maldata->num_tx_chans; ++i) | ||
456 | set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma + | ||
457 | sizeof(struct mal_descriptor) * | ||
458 | mal_tx_bd_offset(mal, i)); | ||
459 | |||
460 | for (i = 0; i < maldata->num_rx_chans; ++i) | ||
461 | set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma + | ||
462 | sizeof(struct mal_descriptor) * | ||
463 | mal_rx_bd_offset(mal, i)); | ||
464 | |||
465 | err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal); | ||
466 | if (err) | ||
467 | goto fail2; | ||
468 | err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal); | ||
469 | if (err) | ||
470 | goto fail3; | ||
471 | err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); | ||
472 | if (err) | ||
473 | goto fail4; | ||
474 | err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); | ||
475 | if (err) | ||
476 | goto fail5; | ||
477 | err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); | ||
478 | if (err) | ||
479 | goto fail6; | ||
480 | |||
481 | /* Enable all MAL SERR interrupt sources */ | ||
482 | set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS); | ||
483 | |||
484 | /* Advertise this instance to the rest of the world */ | ||
485 | ocp_set_drvdata(ocpdev, mal); | ||
486 | |||
487 | mal_dbg_register(mal->def->index, mal); | ||
488 | |||
489 | printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n", | ||
490 | mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans); | ||
491 | return 0; | ||
492 | |||
493 | fail6: | ||
494 | free_irq(maldata->rxde_irq, mal); | ||
495 | fail5: | ||
496 | free_irq(maldata->txeob_irq, mal); | ||
497 | fail4: | ||
498 | free_irq(maldata->txde_irq, mal); | ||
499 | fail3: | ||
500 | free_irq(maldata->serr_irq, mal); | ||
501 | fail2: | ||
502 | dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma); | ||
503 | fail: | ||
504 | kfree(mal); | ||
505 | return err; | ||
506 | } | ||
507 | |||
508 | static void __exit mal_remove(struct ocp_device *ocpdev) | ||
509 | { | ||
510 | struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev); | ||
511 | struct ocp_func_mal_data *maldata = mal->def->additions; | ||
512 | |||
513 | MAL_DBG("%d: remove" NL, mal->def->index); | ||
514 | |||
515 | /* Synchronize with scheduled polling */ | ||
516 | napi_disable(&mal->napi); | ||
517 | |||
518 | if (!list_empty(&mal->list)) { | ||
519 | /* This is *very* bad */ | ||
520 | printk(KERN_EMERG | ||
521 | "mal%d: commac list is not empty on remove!\n", | ||
522 | mal->def->index); | ||
523 | } | ||
524 | |||
525 | ocp_set_drvdata(ocpdev, NULL); | ||
526 | |||
527 | free_irq(maldata->serr_irq, mal); | ||
528 | free_irq(maldata->txde_irq, mal); | ||
529 | free_irq(maldata->txeob_irq, mal); | ||
530 | free_irq(maldata->rxde_irq, mal); | ||
531 | free_irq(maldata->rxeob_irq, mal); | ||
532 | |||
533 | mal_reset(mal); | ||
534 | |||
535 | mal_dbg_register(mal->def->index, NULL); | ||
536 | |||
537 | dma_free_coherent(&ocpdev->dev, | ||
538 | sizeof(struct mal_descriptor) * | ||
539 | (NUM_TX_BUFF * maldata->num_tx_chans + | ||
540 | NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt, | ||
541 | mal->bd_dma); | ||
542 | |||
543 | kfree(mal); | ||
544 | } | ||
545 | |||
546 | /* Structure for a device driver */ | ||
547 | static struct ocp_device_id mal_ids[] = { | ||
548 | { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL }, | ||
549 | { .vendor = OCP_VENDOR_INVALID} | ||
550 | }; | ||
551 | |||
552 | static struct ocp_driver mal_driver = { | ||
553 | .name = "mal", | ||
554 | .id_table = mal_ids, | ||
555 | |||
556 | .probe = mal_probe, | ||
557 | .remove = mal_remove, | ||
558 | }; | ||
559 | |||
560 | int __init mal_init(void) | ||
561 | { | ||
562 | MAL_DBG(": init" NL); | ||
563 | return ocp_register_driver(&mal_driver); | ||
564 | } | ||
565 | |||
566 | void __exit mal_exit(void) | ||
567 | { | ||
568 | MAL_DBG(": exit" NL); | ||
569 | ocp_unregister_driver(&mal_driver); | ||
570 | } | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h deleted file mode 100644 index b8adbe6d4b01..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_mal.h +++ /dev/null | |||
@@ -1,267 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_mal.h | ||
3 | * | ||
4 | * Memory Access Layer (MAL) support | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Copyright 2002 MontaVista Softare Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #ifndef __IBM_EMAC_MAL_H_ | ||
20 | #define __IBM_EMAC_MAL_H_ | ||
21 | |||
22 | #include <linux/init.h> | ||
23 | #include <linux/list.h> | ||
24 | #include <linux/netdevice.h> | ||
25 | |||
26 | #include <asm/io.h> | ||
27 | #include <asm/dcr.h> | ||
28 | |||
29 | /* | ||
30 | * These MAL "versions" probably aren't the real versions IBM uses for these | ||
31 | * MAL cores, I assigned them just to make #ifdefs in this file nicer and | ||
32 | * reflect the fact that 40x and 44x have slightly different MALs. --ebs | ||
33 | */ | ||
34 | #if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \ | ||
35 | defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H) | ||
36 | #define MAL_VERSION 1 | ||
37 | #elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ | ||
38 | defined(CONFIG_440SPE) | ||
39 | #define MAL_VERSION 2 | ||
40 | #else | ||
41 | #error "Unknown SoC, please check chip manual and choose MAL 'version'" | ||
42 | #endif | ||
43 | |||
44 | /* MALx DCR registers */ | ||
45 | #define MAL_CFG 0x00 | ||
46 | #define MAL_CFG_SR 0x80000000 | ||
47 | #define MAL_CFG_PLBB 0x00004000 | ||
48 | #define MAL_CFG_OPBBL 0x00000080 | ||
49 | #define MAL_CFG_EOPIE 0x00000004 | ||
50 | #define MAL_CFG_LEA 0x00000002 | ||
51 | #define MAL_CFG_SD 0x00000001 | ||
52 | #if MAL_VERSION == 1 | ||
53 | #define MAL_CFG_PLBP_MASK 0x00c00000 | ||
54 | #define MAL_CFG_PLBP_10 0x00800000 | ||
55 | #define MAL_CFG_GA 0x00200000 | ||
56 | #define MAL_CFG_OA 0x00100000 | ||
57 | #define MAL_CFG_PLBLE 0x00080000 | ||
58 | #define MAL_CFG_PLBT_MASK 0x00078000 | ||
59 | #define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK) | ||
60 | #elif MAL_VERSION == 2 | ||
61 | #define MAL_CFG_RPP_MASK 0x00c00000 | ||
62 | #define MAL_CFG_RPP_10 0x00800000 | ||
63 | #define MAL_CFG_RMBS_MASK 0x00300000 | ||
64 | #define MAL_CFG_WPP_MASK 0x000c0000 | ||
65 | #define MAL_CFG_WPP_10 0x00080000 | ||
66 | #define MAL_CFG_WMBS_MASK 0x00030000 | ||
67 | #define MAL_CFG_PLBLE 0x00008000 | ||
68 | #define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \ | ||
69 | MAL_CFG_RPP_10 | MAL_CFG_WPP_10) | ||
70 | #else | ||
71 | #error "Unknown MAL version" | ||
72 | #endif | ||
73 | |||
74 | #define MAL_ESR 0x01 | ||
75 | #define MAL_ESR_EVB 0x80000000 | ||
76 | #define MAL_ESR_CIDT 0x40000000 | ||
77 | #define MAL_ESR_CID_MASK 0x3e000000 | ||
78 | #define MAL_ESR_CID_SHIFT 25 | ||
79 | #define MAL_ESR_DE 0x00100000 | ||
80 | #define MAL_ESR_OTE 0x00040000 | ||
81 | #define MAL_ESR_OSE 0x00020000 | ||
82 | #define MAL_ESR_PEIN 0x00010000 | ||
83 | #define MAL_ESR_DEI 0x00000010 | ||
84 | #define MAL_ESR_OTEI 0x00000004 | ||
85 | #define MAL_ESR_OSEI 0x00000002 | ||
86 | #define MAL_ESR_PBEI 0x00000001 | ||
87 | #if MAL_VERSION == 1 | ||
88 | #define MAL_ESR_ONE 0x00080000 | ||
89 | #define MAL_ESR_ONEI 0x00000008 | ||
90 | #elif MAL_VERSION == 2 | ||
91 | #define MAL_ESR_PTE 0x00800000 | ||
92 | #define MAL_ESR_PRE 0x00400000 | ||
93 | #define MAL_ESR_PWE 0x00200000 | ||
94 | #define MAL_ESR_PTEI 0x00000080 | ||
95 | #define MAL_ESR_PREI 0x00000040 | ||
96 | #define MAL_ESR_PWEI 0x00000020 | ||
97 | #else | ||
98 | #error "Unknown MAL version" | ||
99 | #endif | ||
100 | |||
101 | #define MAL_IER 0x02 | ||
102 | #define MAL_IER_DE 0x00000010 | ||
103 | #define MAL_IER_OTE 0x00000004 | ||
104 | #define MAL_IER_OE 0x00000002 | ||
105 | #define MAL_IER_PE 0x00000001 | ||
106 | #if MAL_VERSION == 1 | ||
107 | #define MAL_IER_NWE 0x00000008 | ||
108 | #define MAL_IER_SOC_EVENTS MAL_IER_NWE | ||
109 | #elif MAL_VERSION == 2 | ||
110 | #define MAL_IER_PT 0x00000080 | ||
111 | #define MAL_IER_PRE 0x00000040 | ||
112 | #define MAL_IER_PWE 0x00000020 | ||
113 | #define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE) | ||
114 | #else | ||
115 | #error "Unknown MAL version" | ||
116 | #endif | ||
117 | #define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \ | ||
118 | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) | ||
119 | |||
120 | #define MAL_TXCASR 0x04 | ||
121 | #define MAL_TXCARR 0x05 | ||
122 | #define MAL_TXEOBISR 0x06 | ||
123 | #define MAL_TXDEIR 0x07 | ||
124 | #define MAL_RXCASR 0x10 | ||
125 | #define MAL_RXCARR 0x11 | ||
126 | #define MAL_RXEOBISR 0x12 | ||
127 | #define MAL_RXDEIR 0x13 | ||
128 | #define MAL_TXCTPR(n) ((n) + 0x20) | ||
129 | #define MAL_RXCTPR(n) ((n) + 0x40) | ||
130 | #define MAL_RCBS(n) ((n) + 0x60) | ||
131 | |||
132 | /* In reality MAL can handle TX buffers up to 4095 bytes long, | ||
133 | * but this isn't a good round number :) --ebs | ||
134 | */ | ||
135 | #define MAL_MAX_TX_SIZE 4080 | ||
136 | #define MAL_MAX_RX_SIZE 4080 | ||
137 | |||
138 | static inline int mal_rx_size(int len) | ||
139 | { | ||
140 | len = (len + 0xf) & ~0xf; | ||
141 | return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len; | ||
142 | } | ||
143 | |||
144 | static inline int mal_tx_chunks(int len) | ||
145 | { | ||
146 | return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE; | ||
147 | } | ||
148 | |||
149 | #define MAL_CHAN_MASK(n) (0x80000000 >> (n)) | ||
150 | |||
151 | /* MAL Buffer Descriptor structure */ | ||
152 | struct mal_descriptor { | ||
153 | u16 ctrl; /* MAL / Commac status control bits */ | ||
154 | u16 data_len; /* Max length is 4K-1 (12 bits) */ | ||
155 | u32 data_ptr; /* pointer to actual data buffer */ | ||
156 | }; | ||
157 | |||
158 | /* the following defines are for the MadMAL status and control registers. */ | ||
159 | /* MADMAL transmit and receive status/control bits */ | ||
160 | #define MAL_RX_CTRL_EMPTY 0x8000 | ||
161 | #define MAL_RX_CTRL_WRAP 0x4000 | ||
162 | #define MAL_RX_CTRL_CM 0x2000 | ||
163 | #define MAL_RX_CTRL_LAST 0x1000 | ||
164 | #define MAL_RX_CTRL_FIRST 0x0800 | ||
165 | #define MAL_RX_CTRL_INTR 0x0400 | ||
166 | #define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST) | ||
167 | #define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE) | ||
168 | |||
169 | #define MAL_TX_CTRL_READY 0x8000 | ||
170 | #define MAL_TX_CTRL_WRAP 0x4000 | ||
171 | #define MAL_TX_CTRL_CM 0x2000 | ||
172 | #define MAL_TX_CTRL_LAST 0x1000 | ||
173 | #define MAL_TX_CTRL_INTR 0x0400 | ||
174 | |||
175 | struct mal_commac_ops { | ||
176 | void (*poll_tx) (void *dev); | ||
177 | int (*poll_rx) (void *dev, int budget); | ||
178 | int (*peek_rx) (void *dev); | ||
179 | void (*rxde) (void *dev); | ||
180 | }; | ||
181 | |||
182 | struct mal_commac { | ||
183 | struct mal_commac_ops *ops; | ||
184 | void *dev; | ||
185 | struct list_head poll_list; | ||
186 | int rx_stopped; | ||
187 | |||
188 | u32 tx_chan_mask; | ||
189 | u32 rx_chan_mask; | ||
190 | struct list_head list; | ||
191 | }; | ||
192 | |||
193 | struct ibm_ocp_mal { | ||
194 | dcr_host_t dcrhost; | ||
195 | |||
196 | struct list_head poll_list; | ||
197 | struct napi_struct napi; | ||
198 | |||
199 | struct list_head list; | ||
200 | u32 tx_chan_mask; | ||
201 | u32 rx_chan_mask; | ||
202 | |||
203 | dma_addr_t bd_dma; | ||
204 | struct mal_descriptor *bd_virt; | ||
205 | |||
206 | struct ocp_def *def; | ||
207 | }; | ||
208 | |||
209 | static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg) | ||
210 | { | ||
211 | return dcr_read(mal->dcrhost, reg); | ||
212 | } | ||
213 | |||
214 | static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val) | ||
215 | { | ||
216 | dcr_write(mal->dcrhost, reg, val); | ||
217 | } | ||
218 | |||
219 | /* Register MAL devices */ | ||
220 | int mal_init(void) __init; | ||
221 | void mal_exit(void) __exit; | ||
222 | |||
223 | int mal_register_commac(struct ibm_ocp_mal *mal, | ||
224 | struct mal_commac *commac) __init; | ||
225 | void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac); | ||
226 | int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size); | ||
227 | |||
228 | /* Returns BD ring offset for a particular channel | ||
229 | (in 'struct mal_descriptor' elements) | ||
230 | */ | ||
231 | int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel); | ||
232 | int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel); | ||
233 | |||
234 | void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel); | ||
235 | void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel); | ||
236 | void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel); | ||
237 | void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel); | ||
238 | |||
239 | /* Add/remove EMAC to/from MAL polling list */ | ||
240 | void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac); | ||
241 | void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac); | ||
242 | |||
243 | /* Ethtool MAL registers */ | ||
244 | struct ibm_mal_regs { | ||
245 | u32 tx_count; | ||
246 | u32 rx_count; | ||
247 | |||
248 | u32 cfg; | ||
249 | u32 esr; | ||
250 | u32 ier; | ||
251 | u32 tx_casr; | ||
252 | u32 tx_carr; | ||
253 | u32 tx_eobisr; | ||
254 | u32 tx_deir; | ||
255 | u32 rx_casr; | ||
256 | u32 rx_carr; | ||
257 | u32 rx_eobisr; | ||
258 | u32 rx_deir; | ||
259 | u32 tx_ctpr[32]; | ||
260 | u32 rx_ctpr[32]; | ||
261 | u32 rcbs[32]; | ||
262 | }; | ||
263 | |||
264 | int mal_get_regs_len(struct ibm_ocp_mal *mal); | ||
265 | void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf); | ||
266 | |||
267 | #endif /* __IBM_EMAC_MAL_H_ */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c deleted file mode 100644 index e57862b34cae..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_phy.c +++ /dev/null | |||
@@ -1,398 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_phy.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, PHY support. | ||
5 | * Borrowed from sungem_phy.c, though I only kept the generic MII | ||
6 | * driver for now. | ||
7 | * | ||
8 | * This file should be shared with other drivers or eventually | ||
9 | * merged as the "low level" part of miilib | ||
10 | * | ||
11 | * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) | ||
12 | * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net> | ||
13 | * | ||
14 | */ | ||
15 | #include <linux/module.h> | ||
16 | #include <linux/kernel.h> | ||
17 | #include <linux/types.h> | ||
18 | #include <linux/netdevice.h> | ||
19 | #include <linux/mii.h> | ||
20 | #include <linux/ethtool.h> | ||
21 | #include <linux/delay.h> | ||
22 | |||
23 | #include <asm/ocp.h> | ||
24 | |||
25 | #include "ibm_emac_core.h" | ||
26 | #include "ibm_emac_phy.h" | ||
27 | |||
28 | static inline int phy_read(struct mii_phy *phy, int reg) | ||
29 | { | ||
30 | return phy->mdio_read(phy->dev, phy->address, reg); | ||
31 | } | ||
32 | |||
33 | static inline void phy_write(struct mii_phy *phy, int reg, int val) | ||
34 | { | ||
35 | phy->mdio_write(phy->dev, phy->address, reg, val); | ||
36 | } | ||
37 | |||
38 | /* | ||
39 | * polls MII_BMCR until BMCR_RESET bit clears or operation times out. | ||
40 | * | ||
41 | * returns: | ||
42 | * >= 0 => success, value in BMCR returned to caller | ||
43 | * -EBUSY => failure, RESET bit never cleared | ||
44 | * otherwise => failure, lower level PHY read failed | ||
45 | */ | ||
46 | static int mii_spin_reset_complete(struct mii_phy *phy) | ||
47 | { | ||
48 | int val; | ||
49 | int limit = 10000; | ||
50 | |||
51 | while (limit--) { | ||
52 | val = phy_read(phy, MII_BMCR); | ||
53 | if (val >= 0 && !(val & BMCR_RESET)) | ||
54 | return val; /* success */ | ||
55 | udelay(10); | ||
56 | } | ||
57 | if (val & BMCR_RESET) | ||
58 | val = -EBUSY; | ||
59 | |||
60 | if (net_ratelimit()) | ||
61 | printk(KERN_ERR "emac%d: PHY reset timeout (%d)\n", | ||
62 | ((struct ocp_enet_private *)phy->dev->priv)->def->index, | ||
63 | val); | ||
64 | return val; | ||
65 | } | ||
66 | |||
67 | int mii_reset_phy(struct mii_phy *phy) | ||
68 | { | ||
69 | int val; | ||
70 | |||
71 | val = phy_read(phy, MII_BMCR); | ||
72 | val &= ~BMCR_ISOLATE; | ||
73 | val |= BMCR_RESET; | ||
74 | phy_write(phy, MII_BMCR, val); | ||
75 | |||
76 | udelay(300); | ||
77 | |||
78 | val = mii_spin_reset_complete(phy); | ||
79 | if (val >= 0 && (val & BMCR_ISOLATE)) | ||
80 | phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); | ||
81 | |||
82 | return val < 0; | ||
83 | } | ||
84 | |||
85 | static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) | ||
86 | { | ||
87 | int ctl, adv; | ||
88 | |||
89 | phy->autoneg = AUTONEG_ENABLE; | ||
90 | phy->speed = SPEED_10; | ||
91 | phy->duplex = DUPLEX_HALF; | ||
92 | phy->pause = phy->asym_pause = 0; | ||
93 | phy->advertising = advertise; | ||
94 | |||
95 | /* Setup standard advertise */ | ||
96 | adv = phy_read(phy, MII_ADVERTISE); | ||
97 | if (adv < 0) | ||
98 | return adv; | ||
99 | adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | | ||
100 | ADVERTISE_PAUSE_ASYM); | ||
101 | if (advertise & ADVERTISED_10baseT_Half) | ||
102 | adv |= ADVERTISE_10HALF; | ||
103 | if (advertise & ADVERTISED_10baseT_Full) | ||
104 | adv |= ADVERTISE_10FULL; | ||
105 | if (advertise & ADVERTISED_100baseT_Half) | ||
106 | adv |= ADVERTISE_100HALF; | ||
107 | if (advertise & ADVERTISED_100baseT_Full) | ||
108 | adv |= ADVERTISE_100FULL; | ||
109 | if (advertise & ADVERTISED_Pause) | ||
110 | adv |= ADVERTISE_PAUSE_CAP; | ||
111 | if (advertise & ADVERTISED_Asym_Pause) | ||
112 | adv |= ADVERTISE_PAUSE_ASYM; | ||
113 | phy_write(phy, MII_ADVERTISE, adv); | ||
114 | |||
115 | if (phy->features & | ||
116 | (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { | ||
117 | adv = phy_read(phy, MII_CTRL1000); | ||
118 | if (adv < 0) | ||
119 | return adv; | ||
120 | adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); | ||
121 | if (advertise & ADVERTISED_1000baseT_Full) | ||
122 | adv |= ADVERTISE_1000FULL; | ||
123 | if (advertise & ADVERTISED_1000baseT_Half) | ||
124 | adv |= ADVERTISE_1000HALF; | ||
125 | phy_write(phy, MII_CTRL1000, adv); | ||
126 | } | ||
127 | |||
128 | /* Start/Restart aneg */ | ||
129 | /* on some PHYs (e.g. National DP83843) a write to MII_ADVERTISE | ||
130 | * causes BMCR_RESET to be set on the next read of MII_BMCR, which | ||
131 | * if not checked for causes the PHY to be reset below */ | ||
132 | ctl = mii_spin_reset_complete(phy); | ||
133 | if (ctl < 0) | ||
134 | return ctl; | ||
135 | |||
136 | ctl |= BMCR_ANENABLE | BMCR_ANRESTART; | ||
137 | phy_write(phy, MII_BMCR, ctl); | ||
138 | |||
139 | return 0; | ||
140 | } | ||
141 | |||
142 | static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) | ||
143 | { | ||
144 | int ctl; | ||
145 | |||
146 | phy->autoneg = AUTONEG_DISABLE; | ||
147 | phy->speed = speed; | ||
148 | phy->duplex = fd; | ||
149 | phy->pause = phy->asym_pause = 0; | ||
150 | |||
151 | /* First reset the PHY */ | ||
152 | mii_reset_phy(phy); | ||
153 | |||
154 | ctl = phy_read(phy, MII_BMCR); | ||
155 | if (ctl < 0) | ||
156 | return ctl; | ||
157 | ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE | BMCR_SPEED1000); | ||
158 | |||
159 | /* Select speed & duplex */ | ||
160 | switch (speed) { | ||
161 | case SPEED_10: | ||
162 | break; | ||
163 | case SPEED_100: | ||
164 | ctl |= BMCR_SPEED100; | ||
165 | break; | ||
166 | case SPEED_1000: | ||
167 | ctl |= BMCR_SPEED1000; | ||
168 | break; | ||
169 | default: | ||
170 | return -EINVAL; | ||
171 | } | ||
172 | if (fd == DUPLEX_FULL) | ||
173 | ctl |= BMCR_FULLDPLX; | ||
174 | phy_write(phy, MII_BMCR, ctl); | ||
175 | |||
176 | return 0; | ||
177 | } | ||
178 | |||
179 | static int genmii_poll_link(struct mii_phy *phy) | ||
180 | { | ||
181 | int status; | ||
182 | |||
183 | /* Clear latched value with dummy read */ | ||
184 | phy_read(phy, MII_BMSR); | ||
185 | status = phy_read(phy, MII_BMSR); | ||
186 | if (status < 0 || (status & BMSR_LSTATUS) == 0) | ||
187 | return 0; | ||
188 | if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE)) | ||
189 | return 0; | ||
190 | return 1; | ||
191 | } | ||
192 | |||
193 | static int genmii_read_link(struct mii_phy *phy) | ||
194 | { | ||
195 | if (phy->autoneg == AUTONEG_ENABLE) { | ||
196 | int glpa = 0; | ||
197 | int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); | ||
198 | if (lpa < 0) | ||
199 | return lpa; | ||
200 | |||
201 | if (phy->features & | ||
202 | (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { | ||
203 | int adv = phy_read(phy, MII_CTRL1000); | ||
204 | glpa = phy_read(phy, MII_STAT1000); | ||
205 | |||
206 | if (glpa < 0 || adv < 0) | ||
207 | return adv; | ||
208 | |||
209 | glpa &= adv << 2; | ||
210 | } | ||
211 | |||
212 | phy->speed = SPEED_10; | ||
213 | phy->duplex = DUPLEX_HALF; | ||
214 | phy->pause = phy->asym_pause = 0; | ||
215 | |||
216 | if (glpa & (LPA_1000FULL | LPA_1000HALF)) { | ||
217 | phy->speed = SPEED_1000; | ||
218 | if (glpa & LPA_1000FULL) | ||
219 | phy->duplex = DUPLEX_FULL; | ||
220 | } else if (lpa & (LPA_100FULL | LPA_100HALF)) { | ||
221 | phy->speed = SPEED_100; | ||
222 | if (lpa & LPA_100FULL) | ||
223 | phy->duplex = DUPLEX_FULL; | ||
224 | } else if (lpa & LPA_10FULL) | ||
225 | phy->duplex = DUPLEX_FULL; | ||
226 | |||
227 | if (phy->duplex == DUPLEX_FULL) { | ||
228 | phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; | ||
229 | phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; | ||
230 | } | ||
231 | } else { | ||
232 | int bmcr = phy_read(phy, MII_BMCR); | ||
233 | if (bmcr < 0) | ||
234 | return bmcr; | ||
235 | |||
236 | if (bmcr & BMCR_FULLDPLX) | ||
237 | phy->duplex = DUPLEX_FULL; | ||
238 | else | ||
239 | phy->duplex = DUPLEX_HALF; | ||
240 | if (bmcr & BMCR_SPEED1000) | ||
241 | phy->speed = SPEED_1000; | ||
242 | else if (bmcr & BMCR_SPEED100) | ||
243 | phy->speed = SPEED_100; | ||
244 | else | ||
245 | phy->speed = SPEED_10; | ||
246 | |||
247 | phy->pause = phy->asym_pause = 0; | ||
248 | } | ||
249 | return 0; | ||
250 | } | ||
251 | |||
252 | /* Generic implementation for most 10/100/1000 PHYs */ | ||
253 | static struct mii_phy_ops generic_phy_ops = { | ||
254 | .setup_aneg = genmii_setup_aneg, | ||
255 | .setup_forced = genmii_setup_forced, | ||
256 | .poll_link = genmii_poll_link, | ||
257 | .read_link = genmii_read_link | ||
258 | }; | ||
259 | |||
260 | static struct mii_phy_def genmii_phy_def = { | ||
261 | .phy_id = 0x00000000, | ||
262 | .phy_id_mask = 0x00000000, | ||
263 | .name = "Generic MII", | ||
264 | .ops = &generic_phy_ops | ||
265 | }; | ||
266 | |||
267 | /* CIS8201 */ | ||
268 | #define MII_CIS8201_10BTCSR 0x16 | ||
269 | #define TENBTCSR_ECHO_DISABLE 0x2000 | ||
270 | #define MII_CIS8201_EPCR 0x17 | ||
271 | #define EPCR_MODE_MASK 0x3000 | ||
272 | #define EPCR_GMII_MODE 0x0000 | ||
273 | #define EPCR_RGMII_MODE 0x1000 | ||
274 | #define EPCR_TBI_MODE 0x2000 | ||
275 | #define EPCR_RTBI_MODE 0x3000 | ||
276 | #define MII_CIS8201_ACSR 0x1c | ||
277 | #define ACSR_PIN_PRIO_SELECT 0x0004 | ||
278 | |||
279 | static int cis8201_init(struct mii_phy *phy) | ||
280 | { | ||
281 | int epcr; | ||
282 | |||
283 | epcr = phy_read(phy, MII_CIS8201_EPCR); | ||
284 | if (epcr < 0) | ||
285 | return epcr; | ||
286 | |||
287 | epcr &= ~EPCR_MODE_MASK; | ||
288 | |||
289 | switch (phy->mode) { | ||
290 | case PHY_MODE_TBI: | ||
291 | epcr |= EPCR_TBI_MODE; | ||
292 | break; | ||
293 | case PHY_MODE_RTBI: | ||
294 | epcr |= EPCR_RTBI_MODE; | ||
295 | break; | ||
296 | case PHY_MODE_GMII: | ||
297 | epcr |= EPCR_GMII_MODE; | ||
298 | break; | ||
299 | case PHY_MODE_RGMII: | ||
300 | default: | ||
301 | epcr |= EPCR_RGMII_MODE; | ||
302 | } | ||
303 | |||
304 | phy_write(phy, MII_CIS8201_EPCR, epcr); | ||
305 | |||
306 | /* MII regs override strap pins */ | ||
307 | phy_write(phy, MII_CIS8201_ACSR, | ||
308 | phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT); | ||
309 | |||
310 | /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */ | ||
311 | phy_write(phy, MII_CIS8201_10BTCSR, | ||
312 | phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE); | ||
313 | |||
314 | return 0; | ||
315 | } | ||
316 | |||
317 | static struct mii_phy_ops cis8201_phy_ops = { | ||
318 | .init = cis8201_init, | ||
319 | .setup_aneg = genmii_setup_aneg, | ||
320 | .setup_forced = genmii_setup_forced, | ||
321 | .poll_link = genmii_poll_link, | ||
322 | .read_link = genmii_read_link | ||
323 | }; | ||
324 | |||
325 | static struct mii_phy_def cis8201_phy_def = { | ||
326 | .phy_id = 0x000fc410, | ||
327 | .phy_id_mask = 0x000ffff0, | ||
328 | .name = "CIS8201 Gigabit Ethernet", | ||
329 | .ops = &cis8201_phy_ops | ||
330 | }; | ||
331 | |||
332 | static struct mii_phy_def *mii_phy_table[] = { | ||
333 | &cis8201_phy_def, | ||
334 | &genmii_phy_def, | ||
335 | NULL | ||
336 | }; | ||
337 | |||
338 | int mii_phy_probe(struct mii_phy *phy, int address) | ||
339 | { | ||
340 | struct mii_phy_def *def; | ||
341 | int i; | ||
342 | int id; | ||
343 | |||
344 | phy->autoneg = AUTONEG_DISABLE; | ||
345 | phy->advertising = 0; | ||
346 | phy->address = address; | ||
347 | phy->speed = SPEED_10; | ||
348 | phy->duplex = DUPLEX_HALF; | ||
349 | phy->pause = phy->asym_pause = 0; | ||
350 | |||
351 | /* Take PHY out of isolate mode and reset it. */ | ||
352 | if (mii_reset_phy(phy)) | ||
353 | return -ENODEV; | ||
354 | |||
355 | /* Read ID and find matching entry */ | ||
356 | id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2); | ||
357 | if (id < 0) | ||
358 | return -ENODEV; | ||
359 | for (i = 0; (def = mii_phy_table[i]) != NULL; i++) | ||
360 | if ((id & def->phy_id_mask) == def->phy_id) | ||
361 | break; | ||
362 | /* Should never be NULL (we have a generic entry), but... */ | ||
363 | if (!def) | ||
364 | return -ENODEV; | ||
365 | |||
366 | phy->def = def; | ||
367 | |||
368 | /* Determine PHY features if needed */ | ||
369 | phy->features = def->features; | ||
370 | if (!phy->features) { | ||
371 | u16 bmsr = phy_read(phy, MII_BMSR); | ||
372 | if (bmsr & BMSR_ANEGCAPABLE) | ||
373 | phy->features |= SUPPORTED_Autoneg; | ||
374 | if (bmsr & BMSR_10HALF) | ||
375 | phy->features |= SUPPORTED_10baseT_Half; | ||
376 | if (bmsr & BMSR_10FULL) | ||
377 | phy->features |= SUPPORTED_10baseT_Full; | ||
378 | if (bmsr & BMSR_100HALF) | ||
379 | phy->features |= SUPPORTED_100baseT_Half; | ||
380 | if (bmsr & BMSR_100FULL) | ||
381 | phy->features |= SUPPORTED_100baseT_Full; | ||
382 | if (bmsr & BMSR_ESTATEN) { | ||
383 | u16 esr = phy_read(phy, MII_ESTATUS); | ||
384 | if (esr & ESTATUS_1000_TFULL) | ||
385 | phy->features |= SUPPORTED_1000baseT_Full; | ||
386 | if (esr & ESTATUS_1000_THALF) | ||
387 | phy->features |= SUPPORTED_1000baseT_Half; | ||
388 | } | ||
389 | phy->features |= SUPPORTED_MII; | ||
390 | } | ||
391 | |||
392 | /* Setup default advertising */ | ||
393 | phy->advertising = phy->features; | ||
394 | |||
395 | return 0; | ||
396 | } | ||
397 | |||
398 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h deleted file mode 100644 index a70e0fea54c4..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_phy.h +++ /dev/null | |||
@@ -1,80 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_phy.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, PHY support | ||
5 | * | ||
6 | * Benjamin Herrenschmidt <benh@kernel.crashing.org> | ||
7 | * February 2003 | ||
8 | * | ||
9 | * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004 | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | * | ||
16 | * This file basically duplicates sungem_phy.{c,h} with different PHYs | ||
17 | * supported. I'm looking into merging that in a single mii layer more | ||
18 | * flexible than mii.c | ||
19 | */ | ||
20 | |||
21 | #ifndef _IBM_OCP_PHY_H_ | ||
22 | #define _IBM_OCP_PHY_H_ | ||
23 | |||
24 | struct mii_phy; | ||
25 | |||
26 | /* Operations supported by any kind of PHY */ | ||
27 | struct mii_phy_ops { | ||
28 | int (*init) (struct mii_phy * phy); | ||
29 | int (*suspend) (struct mii_phy * phy, int wol_options); | ||
30 | int (*setup_aneg) (struct mii_phy * phy, u32 advertise); | ||
31 | int (*setup_forced) (struct mii_phy * phy, int speed, int fd); | ||
32 | int (*poll_link) (struct mii_phy * phy); | ||
33 | int (*read_link) (struct mii_phy * phy); | ||
34 | }; | ||
35 | |||
36 | /* Structure used to statically define an mii/gii based PHY */ | ||
37 | struct mii_phy_def { | ||
38 | u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ | ||
39 | u32 phy_id_mask; /* Significant bits */ | ||
40 | u32 features; /* Ethtool SUPPORTED_* defines or | ||
41 | 0 for autodetect */ | ||
42 | int magic_aneg; /* Autoneg does all speed test for us */ | ||
43 | const char *name; | ||
44 | const struct mii_phy_ops *ops; | ||
45 | }; | ||
46 | |||
47 | /* An instance of a PHY, partially borrowed from mii_if_info */ | ||
48 | struct mii_phy { | ||
49 | struct mii_phy_def *def; | ||
50 | u32 advertising; /* Ethtool ADVERTISED_* defines */ | ||
51 | u32 features; /* Copied from mii_phy_def.features | ||
52 | or determined automaticaly */ | ||
53 | int address; /* PHY address */ | ||
54 | int mode; /* PHY mode */ | ||
55 | |||
56 | /* 1: autoneg enabled, 0: disabled */ | ||
57 | int autoneg; | ||
58 | |||
59 | /* forced speed & duplex (no autoneg) | ||
60 | * partner speed & duplex & pause (autoneg) | ||
61 | */ | ||
62 | int speed; | ||
63 | int duplex; | ||
64 | int pause; | ||
65 | int asym_pause; | ||
66 | |||
67 | /* Provided by host chip */ | ||
68 | struct net_device *dev; | ||
69 | int (*mdio_read) (struct net_device * dev, int addr, int reg); | ||
70 | void (*mdio_write) (struct net_device * dev, int addr, int reg, | ||
71 | int val); | ||
72 | }; | ||
73 | |||
74 | /* Pass in a struct mii_phy with dev, mdio_read and mdio_write | ||
75 | * filled, the remaining fields will be filled on return | ||
76 | */ | ||
77 | int mii_phy_probe(struct mii_phy *phy, int address); | ||
78 | int mii_reset_phy(struct mii_phy *phy); | ||
79 | |||
80 | #endif /* _IBM_OCP_PHY_H_ */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c deleted file mode 100644 index 9dbb5e5936c3..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.c +++ /dev/null | |||
@@ -1,200 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_rgmii.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * Copyright 2004 MontaVista Software, Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #include <linux/kernel.h> | ||
20 | #include <linux/ethtool.h> | ||
21 | #include <asm/io.h> | ||
22 | |||
23 | #include "ibm_emac_core.h" | ||
24 | #include "ibm_emac_debug.h" | ||
25 | |||
26 | /* RGMIIx_FER */ | ||
27 | #define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4)) | ||
28 | #define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4)) | ||
29 | #define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) | ||
30 | #define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) | ||
31 | #define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) | ||
32 | |||
33 | /* RGMIIx_SSR */ | ||
34 | #define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) | ||
35 | #define RGMII_SSR_100(idx) (0x2 << ((idx) * 8)) | ||
36 | #define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8)) | ||
37 | |||
38 | /* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ | ||
39 | static inline int rgmii_valid_mode(int phy_mode) | ||
40 | { | ||
41 | return phy_mode == PHY_MODE_GMII || | ||
42 | phy_mode == PHY_MODE_RGMII || | ||
43 | phy_mode == PHY_MODE_TBI || | ||
44 | phy_mode == PHY_MODE_RTBI; | ||
45 | } | ||
46 | |||
47 | static inline const char *rgmii_mode_name(int mode) | ||
48 | { | ||
49 | switch (mode) { | ||
50 | case PHY_MODE_RGMII: | ||
51 | return "RGMII"; | ||
52 | case PHY_MODE_TBI: | ||
53 | return "TBI"; | ||
54 | case PHY_MODE_GMII: | ||
55 | return "GMII"; | ||
56 | case PHY_MODE_RTBI: | ||
57 | return "RTBI"; | ||
58 | default: | ||
59 | BUG(); | ||
60 | } | ||
61 | } | ||
62 | |||
63 | static inline u32 rgmii_mode_mask(int mode, int input) | ||
64 | { | ||
65 | switch (mode) { | ||
66 | case PHY_MODE_RGMII: | ||
67 | return RGMII_FER_RGMII(input); | ||
68 | case PHY_MODE_TBI: | ||
69 | return RGMII_FER_TBI(input); | ||
70 | case PHY_MODE_GMII: | ||
71 | return RGMII_FER_GMII(input); | ||
72 | case PHY_MODE_RTBI: | ||
73 | return RGMII_FER_RTBI(input); | ||
74 | default: | ||
75 | BUG(); | ||
76 | } | ||
77 | } | ||
78 | |||
79 | static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode) | ||
80 | { | ||
81 | struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); | ||
82 | struct rgmii_regs *p; | ||
83 | |||
84 | RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode); | ||
85 | |||
86 | if (!dev) { | ||
87 | dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL); | ||
88 | if (!dev) { | ||
89 | printk(KERN_ERR | ||
90 | "rgmii%d: couldn't allocate device structure!\n", | ||
91 | ocpdev->def->index); | ||
92 | return -ENOMEM; | ||
93 | } | ||
94 | |||
95 | p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr, | ||
96 | sizeof(struct rgmii_regs)); | ||
97 | if (!p) { | ||
98 | printk(KERN_ERR | ||
99 | "rgmii%d: could not ioremap device registers!\n", | ||
100 | ocpdev->def->index); | ||
101 | kfree(dev); | ||
102 | return -ENOMEM; | ||
103 | } | ||
104 | |||
105 | dev->base = p; | ||
106 | ocp_set_drvdata(ocpdev, dev); | ||
107 | |||
108 | /* Disable all inputs by default */ | ||
109 | out_be32(&p->fer, 0); | ||
110 | } else | ||
111 | p = dev->base; | ||
112 | |||
113 | /* Enable this input */ | ||
114 | out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); | ||
115 | |||
116 | printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n", | ||
117 | ocpdev->def->index, input, rgmii_mode_name(mode)); | ||
118 | |||
119 | ++dev->users; | ||
120 | return 0; | ||
121 | } | ||
122 | |||
123 | int __init rgmii_attach(void *emac) | ||
124 | { | ||
125 | struct ocp_enet_private *dev = emac; | ||
126 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
127 | |||
128 | /* Check if we need to attach to a RGMII */ | ||
129 | if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) { | ||
130 | dev->rgmii_input = emacdata->rgmii_mux; | ||
131 | dev->rgmii_dev = | ||
132 | ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII, | ||
133 | emacdata->rgmii_idx); | ||
134 | if (!dev->rgmii_dev) { | ||
135 | printk(KERN_ERR "emac%d: unknown rgmii%d!\n", | ||
136 | dev->def->index, emacdata->rgmii_idx); | ||
137 | return -ENODEV; | ||
138 | } | ||
139 | if (rgmii_init | ||
140 | (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) { | ||
141 | printk(KERN_ERR | ||
142 | "emac%d: rgmii%d initialization failed!\n", | ||
143 | dev->def->index, emacdata->rgmii_idx); | ||
144 | return -ENODEV; | ||
145 | } | ||
146 | } | ||
147 | return 0; | ||
148 | } | ||
149 | |||
150 | void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed) | ||
151 | { | ||
152 | struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); | ||
153 | u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input); | ||
154 | |||
155 | RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); | ||
156 | |||
157 | if (speed == SPEED_1000) | ||
158 | ssr |= RGMII_SSR_1000(input); | ||
159 | else if (speed == SPEED_100) | ||
160 | ssr |= RGMII_SSR_100(input); | ||
161 | |||
162 | out_be32(&dev->base->ssr, ssr); | ||
163 | } | ||
164 | |||
165 | void __rgmii_fini(struct ocp_device *ocpdev, int input) | ||
166 | { | ||
167 | struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); | ||
168 | BUG_ON(!dev || dev->users == 0); | ||
169 | |||
170 | RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); | ||
171 | |||
172 | /* Disable this input */ | ||
173 | out_be32(&dev->base->fer, | ||
174 | in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input)); | ||
175 | |||
176 | if (!--dev->users) { | ||
177 | /* Free everything if this is the last user */ | ||
178 | ocp_set_drvdata(ocpdev, NULL); | ||
179 | iounmap((void *)dev->base); | ||
180 | kfree(dev); | ||
181 | } | ||
182 | } | ||
183 | |||
184 | int __rgmii_get_regs_len(struct ocp_device *ocpdev) | ||
185 | { | ||
186 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
187 | sizeof(struct rgmii_regs); | ||
188 | } | ||
189 | |||
190 | void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf) | ||
191 | { | ||
192 | struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); | ||
193 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
194 | struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1); | ||
195 | |||
196 | hdr->version = 0; | ||
197 | hdr->index = ocpdev->def->index; | ||
198 | memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs)); | ||
199 | return regs + 1; | ||
200 | } | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h deleted file mode 100644 index 971e45815c6c..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.h +++ /dev/null | |||
@@ -1,64 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_rgmii.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. | ||
5 | * | ||
6 | * Based on ocp_zmii.h/ibm_emac_zmii.h | ||
7 | * Armin Kuster akuster@mvista.com | ||
8 | * | ||
9 | * Copyright 2004 MontaVista Software, Inc. | ||
10 | * Matt Porter <mporter@kernel.crashing.org> | ||
11 | * | ||
12 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
13 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
14 | * | ||
15 | * This program is free software; you can redistribute it and/or modify it | ||
16 | * under the terms of the GNU General Public License as published by the | ||
17 | * Free Software Foundation; either version 2 of the License, or (at your | ||
18 | * option) any later version. | ||
19 | */ | ||
20 | |||
21 | #ifndef _IBM_EMAC_RGMII_H_ | ||
22 | #define _IBM_EMAC_RGMII_H_ | ||
23 | |||
24 | |||
25 | /* RGMII bridge */ | ||
26 | struct rgmii_regs { | ||
27 | u32 fer; /* Function enable register */ | ||
28 | u32 ssr; /* Speed select register */ | ||
29 | }; | ||
30 | |||
31 | /* RGMII device */ | ||
32 | struct ibm_ocp_rgmii { | ||
33 | struct rgmii_regs __iomem *base; | ||
34 | int users; /* number of EMACs using this RGMII bridge */ | ||
35 | }; | ||
36 | |||
37 | #ifdef CONFIG_IBM_EMAC_RGMII | ||
38 | int rgmii_attach(void *emac) __init; | ||
39 | |||
40 | void __rgmii_fini(struct ocp_device *ocpdev, int input); | ||
41 | static inline void rgmii_fini(struct ocp_device *ocpdev, int input) | ||
42 | { | ||
43 | if (ocpdev) | ||
44 | __rgmii_fini(ocpdev, input); | ||
45 | } | ||
46 | |||
47 | void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed); | ||
48 | |||
49 | int __rgmii_get_regs_len(struct ocp_device *ocpdev); | ||
50 | static inline int rgmii_get_regs_len(struct ocp_device *ocpdev) | ||
51 | { | ||
52 | return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0; | ||
53 | } | ||
54 | |||
55 | void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf); | ||
56 | #else | ||
57 | # define rgmii_attach(x) 0 | ||
58 | # define rgmii_fini(x,y) ((void)0) | ||
59 | # define rgmii_set_speed(x,y,z) ((void)0) | ||
60 | # define rgmii_get_regs_len(x) 0 | ||
61 | # define rgmii_dump_regs(x,buf) (buf) | ||
62 | #endif /* !CONFIG_IBM_EMAC_RGMII */ | ||
63 | |||
64 | #endif /* _IBM_EMAC_RGMII_H_ */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c deleted file mode 100644 index 3c2d5ba522a1..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_tah.c +++ /dev/null | |||
@@ -1,110 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_tah.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. | ||
5 | * | ||
6 | * Copyright 2004 MontaVista Software, Inc. | ||
7 | * Matt Porter <mporter@kernel.crashing.org> | ||
8 | * | ||
9 | * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | */ | ||
16 | #include <asm/io.h> | ||
17 | |||
18 | #include "ibm_emac_core.h" | ||
19 | |||
20 | static int __init tah_init(struct ocp_device *ocpdev) | ||
21 | { | ||
22 | struct tah_regs *p; | ||
23 | |||
24 | if (ocp_get_drvdata(ocpdev)) { | ||
25 | printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index); | ||
26 | return -EBUSY; | ||
27 | } | ||
28 | |||
29 | /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */ | ||
30 | p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p)); | ||
31 | if (!p) { | ||
32 | printk(KERN_ERR "tah%d: could not ioremap device registers!\n", | ||
33 | ocpdev->def->index); | ||
34 | return -ENOMEM; | ||
35 | } | ||
36 | ocp_set_drvdata(ocpdev, p); | ||
37 | __tah_reset(ocpdev); | ||
38 | |||
39 | return 0; | ||
40 | } | ||
41 | |||
42 | int __init tah_attach(void *emac) | ||
43 | { | ||
44 | struct ocp_enet_private *dev = emac; | ||
45 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
46 | |||
47 | /* Check if we need to attach to a TAH */ | ||
48 | if (emacdata->tah_idx >= 0) { | ||
49 | dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH, | ||
50 | emacdata->tah_idx); | ||
51 | if (!dev->tah_dev) { | ||
52 | printk(KERN_ERR "emac%d: unknown tah%d!\n", | ||
53 | dev->def->index, emacdata->tah_idx); | ||
54 | return -ENODEV; | ||
55 | } | ||
56 | if (tah_init(dev->tah_dev)) { | ||
57 | printk(KERN_ERR | ||
58 | "emac%d: tah%d initialization failed!\n", | ||
59 | dev->def->index, emacdata->tah_idx); | ||
60 | return -ENODEV; | ||
61 | } | ||
62 | } | ||
63 | return 0; | ||
64 | } | ||
65 | |||
66 | void __tah_fini(struct ocp_device *ocpdev) | ||
67 | { | ||
68 | struct tah_regs *p = ocp_get_drvdata(ocpdev); | ||
69 | BUG_ON(!p); | ||
70 | ocp_set_drvdata(ocpdev, NULL); | ||
71 | iounmap((void *)p); | ||
72 | } | ||
73 | |||
74 | void __tah_reset(struct ocp_device *ocpdev) | ||
75 | { | ||
76 | struct tah_regs *p = ocp_get_drvdata(ocpdev); | ||
77 | int n; | ||
78 | |||
79 | /* Reset TAH */ | ||
80 | out_be32(&p->mr, TAH_MR_SR); | ||
81 | n = 100; | ||
82 | while ((in_be32(&p->mr) & TAH_MR_SR) && n) | ||
83 | --n; | ||
84 | |||
85 | if (unlikely(!n)) | ||
86 | printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index); | ||
87 | |||
88 | /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ | ||
89 | out_be32(&p->mr, | ||
90 | TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | | ||
91 | TAH_MR_DIG); | ||
92 | } | ||
93 | |||
94 | int __tah_get_regs_len(struct ocp_device *ocpdev) | ||
95 | { | ||
96 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
97 | sizeof(struct tah_regs); | ||
98 | } | ||
99 | |||
100 | void *tah_dump_regs(struct ocp_device *ocpdev, void *buf) | ||
101 | { | ||
102 | struct tah_regs *dev = ocp_get_drvdata(ocpdev); | ||
103 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
104 | struct tah_regs *regs = (struct tah_regs *)(hdr + 1); | ||
105 | |||
106 | hdr->version = 0; | ||
107 | hdr->index = ocpdev->def->index; | ||
108 | memcpy_fromio(regs, dev, sizeof(struct tah_regs)); | ||
109 | return regs + 1; | ||
110 | } | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h deleted file mode 100644 index ccf64915e1e4..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_tah.h +++ /dev/null | |||
@@ -1,87 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_tah.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. | ||
5 | * | ||
6 | * Copyright 2004 MontaVista Software, Inc. | ||
7 | * Matt Porter <mporter@kernel.crashing.org> | ||
8 | * | ||
9 | * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net> | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify it | ||
12 | * under the terms of the GNU General Public License as published by the | ||
13 | * Free Software Foundation; either version 2 of the License, or (at your | ||
14 | * option) any later version. | ||
15 | */ | ||
16 | |||
17 | #ifndef _IBM_EMAC_TAH_H | ||
18 | #define _IBM_EMAC_TAH_H | ||
19 | |||
20 | #include <linux/init.h> | ||
21 | #include <asm/ocp.h> | ||
22 | |||
23 | /* TAH */ | ||
24 | struct tah_regs { | ||
25 | u32 revid; | ||
26 | u32 pad[3]; | ||
27 | u32 mr; | ||
28 | u32 ssr0; | ||
29 | u32 ssr1; | ||
30 | u32 ssr2; | ||
31 | u32 ssr3; | ||
32 | u32 ssr4; | ||
33 | u32 ssr5; | ||
34 | u32 tsr; | ||
35 | }; | ||
36 | |||
37 | /* TAH engine */ | ||
38 | #define TAH_MR_CVR 0x80000000 | ||
39 | #define TAH_MR_SR 0x40000000 | ||
40 | #define TAH_MR_ST_256 0x01000000 | ||
41 | #define TAH_MR_ST_512 0x02000000 | ||
42 | #define TAH_MR_ST_768 0x03000000 | ||
43 | #define TAH_MR_ST_1024 0x04000000 | ||
44 | #define TAH_MR_ST_1280 0x05000000 | ||
45 | #define TAH_MR_ST_1536 0x06000000 | ||
46 | #define TAH_MR_TFS_16KB 0x00000000 | ||
47 | #define TAH_MR_TFS_2KB 0x00200000 | ||
48 | #define TAH_MR_TFS_4KB 0x00400000 | ||
49 | #define TAH_MR_TFS_6KB 0x00600000 | ||
50 | #define TAH_MR_TFS_8KB 0x00800000 | ||
51 | #define TAH_MR_TFS_10KB 0x00a00000 | ||
52 | #define TAH_MR_DTFP 0x00100000 | ||
53 | #define TAH_MR_DIG 0x00080000 | ||
54 | |||
55 | #ifdef CONFIG_IBM_EMAC_TAH | ||
56 | int tah_attach(void *emac) __init; | ||
57 | |||
58 | void __tah_fini(struct ocp_device *ocpdev); | ||
59 | static inline void tah_fini(struct ocp_device *ocpdev) | ||
60 | { | ||
61 | if (ocpdev) | ||
62 | __tah_fini(ocpdev); | ||
63 | } | ||
64 | |||
65 | void __tah_reset(struct ocp_device *ocpdev); | ||
66 | static inline void tah_reset(struct ocp_device *ocpdev) | ||
67 | { | ||
68 | if (ocpdev) | ||
69 | __tah_reset(ocpdev); | ||
70 | } | ||
71 | |||
72 | int __tah_get_regs_len(struct ocp_device *ocpdev); | ||
73 | static inline int tah_get_regs_len(struct ocp_device *ocpdev) | ||
74 | { | ||
75 | return ocpdev ? __tah_get_regs_len(ocpdev) : 0; | ||
76 | } | ||
77 | |||
78 | void *tah_dump_regs(struct ocp_device *ocpdev, void *buf); | ||
79 | #else | ||
80 | # define tah_attach(x) 0 | ||
81 | # define tah_fini(x) ((void)0) | ||
82 | # define tah_reset(x) ((void)0) | ||
83 | # define tah_get_regs_len(x) 0 | ||
84 | # define tah_dump_regs(x,buf) (buf) | ||
85 | #endif /* !CONFIG_IBM_EMAC_TAH */ | ||
86 | |||
87 | #endif /* _IBM_EMAC_TAH_H */ | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c deleted file mode 100644 index 2c0fdb0cabff..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_zmii.c +++ /dev/null | |||
@@ -1,253 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_zmii.c | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Copyright 2001 MontaVista Softare Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #include <linux/kernel.h> | ||
20 | #include <linux/ethtool.h> | ||
21 | #include <asm/io.h> | ||
22 | |||
23 | #include "ibm_emac_core.h" | ||
24 | #include "ibm_emac_debug.h" | ||
25 | |||
26 | /* ZMIIx_FER */ | ||
27 | #define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) | ||
28 | #define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ | ||
29 | ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) | ||
30 | |||
31 | #define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) | ||
32 | #define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) | ||
33 | #define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) | ||
34 | |||
35 | /* ZMIIx_SSR */ | ||
36 | #define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) | ||
37 | #define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) | ||
38 | #define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) | ||
39 | |||
40 | /* ZMII only supports MII, RMII and SMII | ||
41 | * we also support autodetection for backward compatibility | ||
42 | */ | ||
43 | static inline int zmii_valid_mode(int mode) | ||
44 | { | ||
45 | return mode == PHY_MODE_MII || | ||
46 | mode == PHY_MODE_RMII || | ||
47 | mode == PHY_MODE_SMII || | ||
48 | mode == PHY_MODE_NA; | ||
49 | } | ||
50 | |||
51 | static inline const char *zmii_mode_name(int mode) | ||
52 | { | ||
53 | switch (mode) { | ||
54 | case PHY_MODE_MII: | ||
55 | return "MII"; | ||
56 | case PHY_MODE_RMII: | ||
57 | return "RMII"; | ||
58 | case PHY_MODE_SMII: | ||
59 | return "SMII"; | ||
60 | default: | ||
61 | BUG(); | ||
62 | } | ||
63 | } | ||
64 | |||
65 | static inline u32 zmii_mode_mask(int mode, int input) | ||
66 | { | ||
67 | switch (mode) { | ||
68 | case PHY_MODE_MII: | ||
69 | return ZMII_FER_MII(input); | ||
70 | case PHY_MODE_RMII: | ||
71 | return ZMII_FER_RMII(input); | ||
72 | case PHY_MODE_SMII: | ||
73 | return ZMII_FER_SMII(input); | ||
74 | default: | ||
75 | return 0; | ||
76 | } | ||
77 | } | ||
78 | |||
79 | static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode) | ||
80 | { | ||
81 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); | ||
82 | struct zmii_regs __iomem *p; | ||
83 | |||
84 | ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode); | ||
85 | |||
86 | if (!dev) { | ||
87 | dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); | ||
88 | if (!dev) { | ||
89 | printk(KERN_ERR | ||
90 | "zmii%d: couldn't allocate device structure!\n", | ||
91 | ocpdev->def->index); | ||
92 | return -ENOMEM; | ||
93 | } | ||
94 | dev->mode = PHY_MODE_NA; | ||
95 | |||
96 | p = ioremap(ocpdev->def->paddr, sizeof(struct zmii_regs)); | ||
97 | if (!p) { | ||
98 | printk(KERN_ERR | ||
99 | "zmii%d: could not ioremap device registers!\n", | ||
100 | ocpdev->def->index); | ||
101 | kfree(dev); | ||
102 | return -ENOMEM; | ||
103 | } | ||
104 | dev->base = p; | ||
105 | ocp_set_drvdata(ocpdev, dev); | ||
106 | |||
107 | /* We may need FER value for autodetection later */ | ||
108 | dev->fer_save = in_be32(&p->fer); | ||
109 | |||
110 | /* Disable all inputs by default */ | ||
111 | out_be32(&p->fer, 0); | ||
112 | } else | ||
113 | p = dev->base; | ||
114 | |||
115 | if (!zmii_valid_mode(*mode)) { | ||
116 | /* Probably an EMAC connected to RGMII, | ||
117 | * but it still may need ZMII for MDIO | ||
118 | */ | ||
119 | goto out; | ||
120 | } | ||
121 | |||
122 | /* Autodetect ZMII mode if not specified. | ||
123 | * This is only for backward compatibility with the old driver. | ||
124 | * Please, always specify PHY mode in your board port to avoid | ||
125 | * any surprises. | ||
126 | */ | ||
127 | if (dev->mode == PHY_MODE_NA) { | ||
128 | if (*mode == PHY_MODE_NA) { | ||
129 | u32 r = dev->fer_save; | ||
130 | |||
131 | ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL, | ||
132 | ocpdev->def->index, r); | ||
133 | |||
134 | if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) | ||
135 | dev->mode = PHY_MODE_MII; | ||
136 | else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) | ||
137 | dev->mode = PHY_MODE_RMII; | ||
138 | else | ||
139 | dev->mode = PHY_MODE_SMII; | ||
140 | } else | ||
141 | dev->mode = *mode; | ||
142 | |||
143 | printk(KERN_NOTICE "zmii%d: bridge in %s mode\n", | ||
144 | ocpdev->def->index, zmii_mode_name(dev->mode)); | ||
145 | } else { | ||
146 | /* All inputs must use the same mode */ | ||
147 | if (*mode != PHY_MODE_NA && *mode != dev->mode) { | ||
148 | printk(KERN_ERR | ||
149 | "zmii%d: invalid mode %d specified for input %d\n", | ||
150 | ocpdev->def->index, *mode, input); | ||
151 | return -EINVAL; | ||
152 | } | ||
153 | } | ||
154 | |||
155 | /* Report back correct PHY mode, | ||
156 | * it may be used during PHY initialization. | ||
157 | */ | ||
158 | *mode = dev->mode; | ||
159 | |||
160 | /* Enable this input */ | ||
161 | out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); | ||
162 | out: | ||
163 | ++dev->users; | ||
164 | return 0; | ||
165 | } | ||
166 | |||
167 | int __init zmii_attach(void *emac) | ||
168 | { | ||
169 | struct ocp_enet_private *dev = emac; | ||
170 | struct ocp_func_emac_data *emacdata = dev->def->additions; | ||
171 | |||
172 | if (emacdata->zmii_idx >= 0) { | ||
173 | dev->zmii_input = emacdata->zmii_mux; | ||
174 | dev->zmii_dev = | ||
175 | ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII, | ||
176 | emacdata->zmii_idx); | ||
177 | if (!dev->zmii_dev) { | ||
178 | printk(KERN_ERR "emac%d: unknown zmii%d!\n", | ||
179 | dev->def->index, emacdata->zmii_idx); | ||
180 | return -ENODEV; | ||
181 | } | ||
182 | if (zmii_init | ||
183 | (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) { | ||
184 | printk(KERN_ERR | ||
185 | "emac%d: zmii%d initialization failed!\n", | ||
186 | dev->def->index, emacdata->zmii_idx); | ||
187 | return -ENODEV; | ||
188 | } | ||
189 | } | ||
190 | return 0; | ||
191 | } | ||
192 | |||
193 | void __zmii_enable_mdio(struct ocp_device *ocpdev, int input) | ||
194 | { | ||
195 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); | ||
196 | u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; | ||
197 | |||
198 | ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input); | ||
199 | |||
200 | out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); | ||
201 | } | ||
202 | |||
203 | void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed) | ||
204 | { | ||
205 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); | ||
206 | u32 ssr = in_be32(&dev->base->ssr); | ||
207 | |||
208 | ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); | ||
209 | |||
210 | if (speed == SPEED_100) | ||
211 | ssr |= ZMII_SSR_SP(input); | ||
212 | else | ||
213 | ssr &= ~ZMII_SSR_SP(input); | ||
214 | |||
215 | out_be32(&dev->base->ssr, ssr); | ||
216 | } | ||
217 | |||
218 | void __zmii_fini(struct ocp_device *ocpdev, int input) | ||
219 | { | ||
220 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); | ||
221 | BUG_ON(!dev || dev->users == 0); | ||
222 | |||
223 | ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); | ||
224 | |||
225 | /* Disable this input */ | ||
226 | out_be32(&dev->base->fer, | ||
227 | in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); | ||
228 | |||
229 | if (!--dev->users) { | ||
230 | /* Free everything if this is the last user */ | ||
231 | ocp_set_drvdata(ocpdev, NULL); | ||
232 | iounmap(dev->base); | ||
233 | kfree(dev); | ||
234 | } | ||
235 | } | ||
236 | |||
237 | int __zmii_get_regs_len(struct ocp_device *ocpdev) | ||
238 | { | ||
239 | return sizeof(struct emac_ethtool_regs_subhdr) + | ||
240 | sizeof(struct zmii_regs); | ||
241 | } | ||
242 | |||
243 | void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf) | ||
244 | { | ||
245 | struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); | ||
246 | struct emac_ethtool_regs_subhdr *hdr = buf; | ||
247 | struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); | ||
248 | |||
249 | hdr->version = 0; | ||
250 | hdr->index = ocpdev->def->index; | ||
251 | memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); | ||
252 | return regs + 1; | ||
253 | } | ||
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h deleted file mode 100644 index fad6d8bf983a..000000000000 --- a/drivers/net/ibm_emac/ibm_emac_zmii.h +++ /dev/null | |||
@@ -1,82 +0,0 @@ | |||
1 | /* | ||
2 | * drivers/net/ibm_emac/ibm_emac_zmii.h | ||
3 | * | ||
4 | * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. | ||
5 | * | ||
6 | * Copyright (c) 2004, 2005 Zultys Technologies. | ||
7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||
8 | * | ||
9 | * Based on original work by | ||
10 | * Armin Kuster <akuster@mvista.com> | ||
11 | * Copyright 2001 MontaVista Softare Inc. | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or modify it | ||
14 | * under the terms of the GNU General Public License as published by the | ||
15 | * Free Software Foundation; either version 2 of the License, or (at your | ||
16 | * option) any later version. | ||
17 | * | ||
18 | */ | ||
19 | #ifndef _IBM_EMAC_ZMII_H_ | ||
20 | #define _IBM_EMAC_ZMII_H_ | ||
21 | |||
22 | #include <linux/init.h> | ||
23 | #include <asm/ocp.h> | ||
24 | |||
25 | /* ZMII bridge registers */ | ||
26 | struct zmii_regs { | ||
27 | u32 fer; /* Function enable reg */ | ||
28 | u32 ssr; /* Speed select reg */ | ||
29 | u32 smiirs; /* SMII status reg */ | ||
30 | }; | ||
31 | |||
32 | /* ZMII device */ | ||
33 | struct ibm_ocp_zmii { | ||
34 | struct zmii_regs __iomem *base; | ||
35 | int mode; /* subset of PHY_MODE_XXXX */ | ||
36 | int users; /* number of EMACs using this ZMII bridge */ | ||
37 | u32 fer_save; /* FER value left by firmware */ | ||
38 | }; | ||
39 | |||
40 | #ifdef CONFIG_IBM_EMAC_ZMII | ||
41 | int zmii_attach(void *emac) __init; | ||
42 | |||
43 | void __zmii_fini(struct ocp_device *ocpdev, int input); | ||
44 | static inline void zmii_fini(struct ocp_device *ocpdev, int input) | ||
45 | { | ||
46 | if (ocpdev) | ||
47 | __zmii_fini(ocpdev, input); | ||
48 | } | ||
49 | |||
50 | void __zmii_enable_mdio(struct ocp_device *ocpdev, int input); | ||
51 | static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input) | ||
52 | { | ||
53 | if (ocpdev) | ||
54 | __zmii_enable_mdio(ocpdev, input); | ||
55 | } | ||
56 | |||
57 | void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed); | ||
58 | static inline void zmii_set_speed(struct ocp_device *ocpdev, int input, | ||
59 | int speed) | ||
60 | { | ||
61 | if (ocpdev) | ||
62 | __zmii_set_speed(ocpdev, input, speed); | ||
63 | } | ||
64 | |||
65 | int __zmii_get_regs_len(struct ocp_device *ocpdev); | ||
66 | static inline int zmii_get_regs_len(struct ocp_device *ocpdev) | ||
67 | { | ||
68 | return ocpdev ? __zmii_get_regs_len(ocpdev) : 0; | ||
69 | } | ||
70 | |||
71 | void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf); | ||
72 | |||
73 | #else | ||
74 | # define zmii_attach(x) 0 | ||
75 | # define zmii_fini(x,y) ((void)0) | ||
76 | # define zmii_enable_mdio(x,y) ((void)0) | ||
77 | # define zmii_set_speed(x,y,z) ((void)0) | ||
78 | # define zmii_get_regs_len(x) 0 | ||
79 | # define zmii_dump_regs(x,buf) (buf) | ||
80 | #endif /* !CONFIG_IBM_EMAC_ZMII */ | ||
81 | |||
82 | #endif /* _IBM_EMAC_ZMII_H_ */ | ||