6 files changed, 73 insertions, 45 deletions

diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index e0d5206d1de3..0e8411710238 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -8,7 +8,7 @@ Supported chips:
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM90.html
   * National Semiconductor LM89
-    Prefix: 'lm99'
+    Prefix: 'lm89' (no auto-detection)
     Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/mpf/LM/LM89.html
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index d9e7a49d6cbf..70bb854086df 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -178,7 +178,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM",                26, 1, 1, 1, 0 },
                 { "CPU Fan",            32, 2, 60, 1, 0 },
                 { "NB Fan",             33, 2, 60, 1, 0 },
@@ -200,7 +200,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM1",               26, 1, 1, 1, 0 },
                 { "PWM2",               27, 1, 1, 1, 0 },
                 { "PWM3",               28, 1, 1, 1, 0 },
@@ -229,7 +229,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM",                26, 1, 1, 1, 0 },
                 { "CPU Fan",            32, 2, 60, 1, 0 },
                 { "NB Fan",             33, 2, 60, 1, 0 },
@@ -250,7 +250,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM",                26, 1, 1, 1, 0 },
                 { "CPU Fan",            32, 2, 60, 1, 0 },
                 { "NB Fan",             33, 2, 60, 1, 0 },
@@ -342,7 +342,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM1",               26, 1, 1, 1, 0 },
                 { "PWM2",               27, 1, 1, 1, 0 },
                 { "PWM3",               28, 1, 1, 1, 0 },
@@ -371,7 +371,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM",                26, 1, 1, 1, 0 },
                 { "CPU Fan",            32, 2, 60, 1, 0 },
                 { "NB Fan",             33, 2, 60, 1, 0 },
@@ -402,7 +402,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0016, NULL /* AW9D-MAX, need DMI string */, {
+        { 0x0016, "AW9D-MAX       (Intel i975-ICH7)", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -416,7 +416,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM1",               26, 1, 1, 1, 0 },
                 { "PWM2",               27, 1, 1, 1, 0 },
                 { "PWM3",               28, 1, 1, 1, 0 },
@@ -446,7 +446,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "ATX +3.3V",          10, 0, 20, 1, 0 },
                 { "ATX 5VSB",           11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            26, 1, 1, 1, 0 },
+                { "System",             26, 1, 1, 1, 0 },
                 { "PWM",                27, 1, 1, 1, 0 },
                 { "CPU FAN",            32, 2, 60, 1, 0 },
                 { "SYS FAN",            34, 2, 60, 1, 0 },
@@ -469,7 +469,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM Phase1",         26, 1, 1, 1, 0 },
                 { "PWM Phase2",         27, 1, 1, 1, 0 },
                 { "PWM Phase3",         28, 1, 1, 1, 0 },
@@ -487,7 +487,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "DDR2",               13, 0, 20, 1, 0 },
                 { "DDR2 VTT",           14, 0, 10, 1, 0 },
                 { "CPU VTT",             3, 0, 20, 1, 0 },
-                { "NB 1.2V ",            4, 0, 10, 1, 0 },
+                { "NB 1.2V",             4, 0, 10, 1, 0 },
                 { "SB 1.5V",             6, 0, 10, 1, 0 },
                 { "HyperTransport",      5, 0, 10, 1, 0 },
                 { "ATX +12V (24-Pin)",  12, 0, 60, 1, 0 },
@@ -496,7 +496,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "ATX +3.3V",          10, 0, 20, 1, 0 },
                 { "ATX 5VSB",           11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
                 { "PWM Phase1",         26, 1, 1, 1, 0 },
                 { "PWM Phase2",         27, 1, 1, 1, 0 },
                 { "PWM Phase3",         28, 1, 1, 1, 0 },
@@ -523,8 +523,8 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "+3.3V",              10, 0, 20, 1, 0 },
                 { "5VSB",               11, 0, 30, 1, 0 },
                 { "CPU",                24, 1, 1, 1, 0 },
-                { "System ",            25, 1, 1, 1, 0 },
-                { "PWM ",               26, 1, 1, 1, 0 },
+                { "System",             25, 1, 1, 1, 0 },
+                { "PWM",                26, 1, 1, 1, 0 },
                 { "PWM Phase2",         27, 1, 1, 1, 0 },
                 { "PWM Phase3",         28, 1, 1, 1, 0 },
                 { "PWM Phase4",         29, 1, 1, 1, 0 },
@@ -947,7 +947,7 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
         if (!abituguru3_motherboards[i].dmi_name) {
                 printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
                         "not detected using DMI. Please send the output of "
-                        "\"dmidecode\" to the abituguru3 maintainer"
+                        "\"dmidecode\" to the abituguru3 maintainer "
                         "(see MAINTAINERS)\n");
         }
 #endif
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 3a0b63136479..b9a8ea30c99c 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -319,35 +319,24 @@ out:
 }
 
 /*
- * On this chip, voltages are given as a count of steps between a minimum
- * and maximum voltage, not a direct voltage.
+ * Conversions
  */
-static const int volt_convert_table[][2] = {
-        {2997, 3},
-        {4395, 4},
+
+/* IN are scaled acording to built-in resistors */
+static const int adt7473_scaling[] = {  /* .001 Volts */
+        2250, 3300
 };
+#define SCALE(val, from, to)    (((val) * (to) + ((from) / 2)) / (from))
 
 static int decode_volt(int volt_index, u8 raw)
 {
-        int cmax = volt_convert_table[volt_index][0];
-        int cmin = volt_convert_table[volt_index][1];
-        return ((raw * (cmax - cmin)) / 255) + cmin;
+        return SCALE(raw, 192, adt7473_scaling[volt_index]);
 }
 
 static u8 encode_volt(int volt_index, int cooked)
 {
-        int cmax = volt_convert_table[volt_index][0];
-        int cmin = volt_convert_table[volt_index][1];
-        u8 x;
-
-        if (cooked > cmax)
-                cooked = cmax;
-        else if (cooked < cmin)
-                cooked = cmin;
-
-        x = ((cooked - cmin) * 255) / (cmax - cmin);
-
-        return x;
+        int raw = SCALE(cooked, adt7473_scaling[volt_index], 192);
+        return SENSORS_LIMIT(raw, 0, 255);
 }
 
 static ssize_t show_volt_min(struct device *dev,
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index c54eff92be4a..bfc296145bba 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -180,6 +180,7 @@ static struct vrm_model vrm_models[] = {
         {X86_VENDOR_AMD, 0x6, ANY, ANY, 90},            /* Athlon Duron etc */
         {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},           /* Athlon 64, Opteron */
         {X86_VENDOR_AMD, 0xF, ANY, ANY, 25},            /* NPT family 0Fh */
+        {X86_VENDOR_AMD, 0x10, ANY, ANY, 25},           /* NPT family 10h */
         {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},          /* Pentium M (130 nm) */
         {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},          /* Tualatin */
         {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},          /* Pentium M (90 nm) */
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 3edeebc0b835..96a701866726 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -12,9 +12,9 @@
  * made by National Semiconductor. Both have an increased remote
  * temperature measurement accuracy (1 degree), and the LM99
  * additionally shifts remote temperatures (measured and limits) by 16
- * degrees, which allows for higher temperatures measurement. The
- * driver doesn't handle it since it can be done easily in user-space.
+ * degrees, which allows for higher temperatures measurement.
  * Note that there is no way to differentiate between both chips.
+ * When device is auto-detected, the driver will assume an LM99.
  *
  * This driver also supports the LM86, another sensor chip made by
  * National Semiconductor. It is exactly similar to the LM90 except it
@@ -169,8 +169,8 @@ static const struct i2c_device_id lm90_id[] = {
         { "adt7461", adt7461 },
         { "lm90", lm90 },
         { "lm86", lm86 },
-        { "lm89", lm99 },
-        { "lm99", lm99 },       /* Missing temperature offset */
+        { "lm89", lm86 },
+        { "lm99", lm99 },
         { "max6646", max6646 },
         { "max6647", max6646 },
         { "max6649", max6646 },
@@ -366,6 +366,10 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
         else
                 temp = temp_from_s8(data->temp8[attr->index]);
 
+        /* +16 degrees offset for temp2 for the LM99 */
+        if (data->kind == lm99 && attr->index == 3)
+                temp += 16000;
+
         return sprintf(buf, "%d\n", temp);
 }
 
@@ -385,6 +389,10 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
         long val = simple_strtol(buf, NULL, 10);
         int nr = attr->index;
 
+        /* +16 degrees offset for temp2 for the LM99 */
+        if (data->kind == lm99 && attr->index == 3)
+                val -= 16000;
+
         mutex_lock(&data->update_lock);
         if (data->kind == adt7461)
                 data->temp8[nr] = temp_to_u8_adt7461(data, val);
@@ -411,6 +419,10 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
         else
                 temp = temp_from_s16(data->temp11[attr->index]);
 
+        /* +16 degrees offset for temp2 for the LM99 */
+        if (data->kind == lm99 &&  attr->index <= 2)
+                temp += 16000;
+
         return sprintf(buf, "%d\n", temp);
 }
 
@@ -432,6 +444,10 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
         long val = simple_strtol(buf, NULL, 10);
         int nr = attr->index;
 
+        /* +16 degrees offset for temp2 for the LM99 */
+        if (data->kind == lm99 && attr->index <= 2)
+                val -= 16000;
+
         mutex_lock(&data->update_lock);
         if (data->kind == adt7461)
                 data->temp11[nr] = temp_to_u16_adt7461(data, val);
@@ -461,9 +477,15 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt
 
         if (data->kind == adt7461)
                 temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
+        else if (data->kind == max6646)
+                temp = temp_from_u8(data->temp8[attr->index]);
         else
                 temp = temp_from_s8(data->temp8[attr->index]);
 
+        /* +16 degrees offset for temp2 for the LM99 */
+        if (data->kind == lm99 && attr->index == 3)
+                temp += 16000;
+
         return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst));
 }
 
@@ -473,12 +495,19 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
         struct i2c_client *client = to_i2c_client(dev);
         struct lm90_data *data = i2c_get_clientdata(client);
         long val = simple_strtol(buf, NULL, 10);
-        long hyst;
+        int temp;
 
         mutex_lock(&data->update_lock);
-        hyst = temp_from_s8(data->temp8[2]) - val;
+        if (data->kind == adt7461)
+                temp = temp_from_u8_adt7461(data, data->temp8[2]);
+        else if (data->kind == max6646)
+                temp = temp_from_u8(data->temp8[2]);
+        else
+                temp = temp_from_s8(data->temp8[2]);
+
+        data->temp_hyst = hyst_to_reg(temp - val);
         i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
-                                  hyst_to_reg(hyst));
+                                  data->temp_hyst);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -682,6 +711,15 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
                                 } else
                                 if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
                                         kind = lm99;
+                                        dev_info(&adapter->dev,
+                                                 "Assuming LM99 chip at "
+                                                 "0x%02x\n", address);
+                                        dev_info(&adapter->dev,
+                                                 "If it is an LM89, pass "
+                                                 "force_lm86=%d,0x%02x when "
+                                                 "loading the lm90 driver\n",
+                                                 i2c_adapter_id(adapter),
+                                                 address);
                                 } else
                                 if (address == 0x4C
                                  && (chip_id & 0xF0) == 0x10) { /* LM86 */
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d4d1b859d4f1..fc12bd412e3a 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1968,7 +1968,7 @@ exit:
         return res;
 }
 
-static void __exit
+static void
 w83781d_isa_unregister(void)
 {
         if (pdev) {
@@ -2017,7 +2017,7 @@ w83781d_isa_register(void)
         return 0;
 }
 
-static void __exit
+static void
 w83781d_isa_unregister(void)
 {
 }