81 files changed, 5778 insertions, 14 deletions

diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt
new file mode 100644
index 000000000000..4755caaccba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda.txt
@@ -0,0 +1,8 @@
+Calxeda Highbank Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
+properties.
+
+Required root node properties:
+    - compatible = "calxeda,highbank";
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index e2401cd632ab..c9848ad0e2e3 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -1,3 +1,6 @@
+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
 i.MX51 Babbage Board
 Required root node properties:
     - compatible = "fsl,imx51-babbage", "fsl,imx51";
@@ -17,3 +20,7 @@ Required root node properties:
 i.MX53 Smart Mobile Reference Design Board
 Required root node properties:
     - compatible = "fsl,imx53-smd", "fsl,imx53";
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
diff --git a/Documentation/devicetree/bindings/arm/picoxcell.txt b/Documentation/devicetree/bindings/arm/picoxcell.txt
new file mode 100644
index 000000000000..e75c0ef51e69
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/picoxcell.txt
@@ -0,0 +1,24 @@
+Picochip picoXcell device tree bindings.
+========================================
+
+Required root node properties:
+    - compatible:
+        - "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
+        - "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
+        - "picochip,pc3x3" : picoXcell PC3X3 device based board.
+        - "picochip,pc3x2" : picoXcell PC3X2 device based board.
+
+Timers required properties:
+    - compatible = "picochip,pc3x2-timer"
+    - interrupts : The single IRQ line for the timer.
+    - clock-freq : The frequency in HZ of the timer.
+    - reg : The register bank for the timer.
+
+Note: two timers are required - one for the scheduler clock and one for the
+event tick/NOHZ.
+
+VIC required properties:
+    - compatible = "arm,pl192-vic".
+    - interrupt-controller.
+    - reg : The register bank for the device.
+    - #interrupt-cells : Must be 1.
diff --git a/MAINTAINERS b/MAINTAINERS
index 5d6941f8c436..c406f9ba1923 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -692,6 +692,12 @@ F:	drivers/mtd/nand/bcm_umi_nand.c
 F:      drivers/mtd/nand/bcm_umi_bch.c
 F:      drivers/mtd/nand/nand_bcm_umi.h
 
+ARM/CALXEDA HIGHBANK ARCHITECTURE
+M:      Rob Herring <rob.herring@calxeda.com>
+L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:      Maintained
+F:      arch/arm/mach-highbank/
+
 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
 M:      Anton Vorontsov <avorontsov@mvista.com>
 S:      Maintained
@@ -791,6 +797,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:      Maintained
 F:      arch/arm/mach-mx5/
 
+ARM/FREESCALE IMX6
+M:      Shawn Guo <shawn.guo@linaro.org>
+L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:      Maintained
+T:      git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F:      arch/arm/mach-imx/*imx6*
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bcc067006342..fe6b0526b3a6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -334,6 +334,20 @@ config ARCH_BCMRING
         help
           Support for Broadcom's BCMRing platform.
 
+config ARCH_HIGHBANK
+        bool "Calxeda Highbank-based"
+        select ARCH_WANT_OPTIONAL_GPIOLIB
+        select ARM_AMBA
+        select ARM_GIC
+        select ARM_TIMER_SP804
+        select CLKDEV_LOOKUP
+        select CPU_V7
+        select GENERIC_CLOCKEVENTS
+        select HAVE_ARM_SCU
+        select USE_OF
+        help
+          Support for the Calxeda Highbank SoC based boards.
+
 config ARCH_CLPS711X
         bool "Cirrus Logic CLPS711x/EP721x-based"
         select CPU_ARM720T
@@ -623,6 +637,24 @@ config ARCH_TEGRA
           This enables support for NVIDIA Tegra based systems (Tegra APX,
           Tegra 6xx and Tegra 2 series).
 
+config ARCH_PICOXCELL
+        bool "Picochip picoXcell"
+        select ARCH_REQUIRE_GPIOLIB
+        select ARM_PATCH_PHYS_VIRT
+        select ARM_VIC
+        select CPU_V6K
+        select DW_APB_TIMER
+        select GENERIC_CLOCKEVENTS
+        select GENERIC_GPIO
+        select HAVE_SCHED_CLOCK
+        select HAVE_TCM
+        select NO_IOPORT
+        select USE_OF
+        help
+          This enables support for systems based on the Picochip picoXcell
+          family of Femtocell devices.  The picoxcell support requires device tree
+          for all boards.
+
 config ARCH_PNX4008
         bool "Philips Nexperia PNX4008 Mobile"
         select CPU_ARM926T
@@ -1398,7 +1430,7 @@ config SMP
         depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
                  MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
                  ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-                 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
+                 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
         depends on MMU
         select USE_GENERIC_SMP_HELPERS
         select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 64db5b1648e5..c5213e78606b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -128,6 +128,13 @@ choice
                   Say Y here if you want the debug print routines to direct
                   their output to the second serial port on these devices.
 
+        config DEBUG_HIGHBANK_UART
+                bool "Kernel low-level debugging messages via Highbank UART"
+                depends on ARCH_HIGHBANK
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the UART on Highbank based devices.
+
         config DEBUG_IMX1_UART
                 bool "i.MX1 Debug UART"
                 depends on SOC_IMX1
@@ -184,6 +191,13 @@ choice
                   Say Y here if you want kernel low-level debugging support
                   on i.MX50 or i.MX53.
 
+        config DEBUG_IMX6Q_UART
+                bool "i.MX6Q Debug UART"
+                depends on SOC_IMX6Q
+                help
+                  Say Y here if you want kernel low-level debugging support
+                  on i.MX6Q.
+
         config DEBUG_S3C_UART0
                 depends on PLAT_SAMSUNG
                 bool "Use S3C UART 0 for low-level debug"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 30b920148202..b7c2d377a6c2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -144,6 +144,7 @@ machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)           := ep93xx
 machine-$(CONFIG_ARCH_GEMINI)           := gemini
 machine-$(CONFIG_ARCH_H720X)            := h720x
+machine-$(CONFIG_ARCH_HIGHBANK)         := highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)       := integrator
 machine-$(CONFIG_ARCH_IOP13XX)          := iop13xx
 machine-$(CONFIG_ARCH_IOP32X)           := iop32x
@@ -158,7 +159,7 @@ machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)              := msm
 machine-$(CONFIG_ARCH_MV78XX0)          := mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)        := imx
-machine-$(CONFIG_ARCH_MX3)              := imx
+machine-$(CONFIG_ARCH_IMX_V6_V7)        := imx
 machine-$(CONFIG_ARCH_MX5)              := mx5
 machine-$(CONFIG_ARCH_MXS)              := mxs
 machine-$(CONFIG_ARCH_NETX)             := netx
@@ -168,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP2)		:= omap2
 machine-$(CONFIG_ARCH_OMAP3)            := omap2
 machine-$(CONFIG_ARCH_OMAP4)            := omap2
 machine-$(CONFIG_ARCH_ORION5X)          := orion5x
+machine-$(CONFIG_ARCH_PICOXCELL)        := picoxcell
 machine-$(CONFIG_ARCH_PNX4008)          := pnx4008
 machine-$(CONFIG_ARCH_PRIMA2)           := prima2
 machine-$(CONFIG_ARCH_PXA)              := pxa
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
new file mode 100644
index 000000000000..aeb1a7578fad
--- /dev/null
+++ b/arch/arm/boot/dts/highbank.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+        model = "Calxeda Highbank";
+        compatible = "calxeda,highbank";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpu@0 {
+                        compatible = "arm,cortex-a9";
+                        reg = <0>;
+                        next-level-cache = <&L2>;
+                };
+
+                cpu@1 {
+                        compatible = "arm,cortex-a9";
+                        reg = <1>;
+                        next-level-cache = <&L2>;
+                };
+
+                cpu@2 {
+                        compatible = "arm,cortex-a9";
+                        reg = <2>;
+                        next-level-cache = <&L2>;
+                };
+
+                cpu@3 {
+                        compatible = "arm,cortex-a9";
+                        reg = <3>;
+                        next-level-cache = <&L2>;
+                };
+        };
+
+        memory {
+                name = "memory";
+                device_type = "memory";
+                reg = <0x00000000 0xff900000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyAMA0";
+        };
+
+        soc {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                interrupt-parent = <&intc>;
+                ranges;
+
+                timer@fff10600 {
+                        compatible = "arm,smp-twd";
+                        reg = <0xfff10600 0x20>;
+                        interrupts = <1 13 0xf04>;
+                };
+
+                watchdog@fff10620 {
+                        compatible = "arm,cortex-a9-wdt";
+                        reg = <0xfff10620 0x20>;
+                        interrupts = <1 14 0xf04>;
+                };
+
+                intc: interrupt-controller@fff11000 {
+                        compatible = "arm,cortex-a9-gic";
+                        #interrupt-cells = <3>;
+                        #size-cells = <0>;
+                        #address-cells = <1>;
+                        interrupt-controller;
+                        interrupt-parent;
+                        reg = <0xfff11000 0x1000>,
+                              <0xfff10100 0x100>;
+                };
+
+                L2: l2-cache {
+                        compatible = "arm,pl310-cache";
+                        reg = <0xfff12000 0x1000>;
+                        interrupts = <0 70 4>;
+                        cache-unified;
+                        cache-level = <2>;
+                };
+
+                pmu {
+                        compatible = "arm,cortex-a9-pmu";
+                        interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+                };
+
+                sata@ffe08000 {
+                        compatible = "calxeda,hb-ahci";
+                        reg = <0xffe08000 0x10000>;
+                        interrupts = <0 83 4>;
+                };
+
+                sdhci@ffe0e000 {
+                        compatible = "calxeda,hb-sdhci";
+                        reg = <0xffe0e000 0x1000>;
+                        interrupts = <0 90 4>;
+                };
+
+                ipc@fff20000 {
+                        compatible = "arm,pl320", "arm,primecell";
+                        reg = <0xfff20000 0x1000>;
+                        interrupts = <0 7 4>;
+                };
+
+                gpioe: gpio@fff30000 {
+                        #gpio-cells = <2>;
+                        compatible = "arm,pl061", "arm,primecell";
+                        gpio-controller;
+                        reg = <0xfff30000 0x1000>;
+                        interrupts = <0 14 4>;
+                };
+
+                gpiof: gpio@fff31000 {
+                        #gpio-cells = <2>;
+                        compatible = "arm,pl061", "arm,primecell";
+                        gpio-controller;
+                        reg = <0xfff31000 0x1000>;
+                        interrupts = <0 15 4>;
+                };
+
+                gpiog: gpio@fff32000 {
+                        #gpio-cells = <2>;
+                        compatible = "arm,pl061", "arm,primecell";
+                        gpio-controller;
+                        reg = <0xfff32000 0x1000>;
+                        interrupts = <0 16 4>;
+                };
+
+                gpioh: gpio@fff33000 {
+                        #gpio-cells = <2>;
+                        compatible = "arm,pl061", "arm,primecell";
+                        gpio-controller;
+                        reg = <0xfff33000 0x1000>;
+                        interrupts = <0 17 4>;
+                };
+
+                timer {
+                        compatible = "arm,sp804", "arm,primecell";
+                        reg = <0xfff34000 0x1000>;
+                        interrupts = <0 18 4>;
+                };
+
+                rtc@fff35000 {
+                        compatible = "arm,pl031", "arm,primecell";
+                        reg = <0xfff35000 0x1000>;
+                        interrupts = <0 19 4>;
+                };
+
+                serial@fff36000 {
+                        compatible = "arm,pl011", "arm,primecell";
+                        reg = <0xfff36000 0x1000>;
+                        interrupts = <0 20 4>;
+                };
+
+                smic@fff3a000 {
+                        compatible = "ipmi-smic";
+                        device_type = "ipmi";
+                        reg = <0xfff3a000 0x1000>;
+                        interrupts = <0 24 4>;
+                        reg-size = <4>;
+                        reg-spacing = <4>;
+                };
+
+                sregs@fff3c000 {
+                        compatible = "calxeda,hb-sregs";
+                        reg = <0xfff3c000 0x1000>;
+                };
+
+                dma@fff3d000 {
+                        compatible = "arm,pl330", "arm,primecell";
+                        reg = <0xfff3d000 0x1000>;
+                        interrupts = <0 92 4>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 000000000000..072974e443f2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+        model = "Freescale i.MX6 Quad SABRE Automotive Board";
+        compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+        chosen {
+                bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+        };
+
+        memory {
+                reg = <0x10000000 0x80000000>;
+        };
+
+        soc {
+                aips-bus@02100000 { /* AIPS2 */
+                        enet@02188000 {
+                                phy-mode = "rgmii";
+                                local-mac-address = [00 04 9F 01 1B 61];
+                                status = "okay";
+                        };
+
+                        usdhc@02198000 { /* uSDHC3 */
+                                cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+                                wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+                                status = "okay";
+                        };
+
+                        usdhc@0219c000 { /* uSDHC4 */
+                                fsl,card-wired;
+                                status = "okay";
+                        };
+
+                        uart3: uart@021f0000 { /* UART4 */
+                                status = "okay";
+                        };
+                };
+        };
+
+        leds {
+                compatible = "gpio-leds";
+
+                debug-led {
+                        label = "Heartbeat";
+                        gpios = <&gpio2 25 0>; /* GPIO3_25 */
+                        linux,default-trigger = "heartbeat";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
new file mode 100644
index 000000000000..7dda599558cc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -0,0 +1,575 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        aliases {
+                serial0 = &uart0;
+                serial1 = &uart1;
+                serial2 = &uart2;
+                serial3 = &uart3;
+                serial4 = &uart4;
+        };
+
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpu@0 {
+                        compatible = "arm,cortex-a9";
+                        reg = <0>;
+                        next-level-cache = <&L2>;
+                };
+
+                cpu@1 {
+                        compatible = "arm,cortex-a9";
+                        reg = <1>;
+                        next-level-cache = <&L2>;
+                };
+
+                cpu@2 {
+                        compatible = "arm,cortex-a9";
+                        reg = <2>;
+                        next-level-cache = <&L2>;
+                };
+
+                cpu@3 {
+                        compatible = "arm,cortex-a9";
+                        reg = <3>;
+                        next-level-cache = <&L2>;
+                };
+        };
+
+        intc: interrupt-controller@00a01000 {
+                compatible = "arm,cortex-a9-gic";
+                #interrupt-cells = <3>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                interrupt-controller;
+                reg = <0x00a01000 0x1000>,
+                      <0x00a00100 0x100>;
+        };
+
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ckil {
+                        compatible = "fsl,imx-ckil", "fixed-clock";
+                        clock-frequency = <32768>;
+                };
+
+                ckih1 {
+                        compatible = "fsl,imx-ckih1", "fixed-clock";
+                        clock-frequency = <0>;
+                };
+
+                osc {
+                        compatible = "fsl,imx-osc", "fixed-clock";
+                        clock-frequency = <24000000>;
+                };
+        };
+
+        soc {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                interrupt-parent = <&intc>;
+                ranges;
+
+                timer@00a00600 {
+                        compatible = "arm,smp-twd";
+                        reg = <0x00a00600 0x100>;
+                        interrupts = <1 13 0xf4>;
+                };
+
+                L2: l2-cache@00a02000 {
+                        compatible = "arm,pl310-cache";
+                        reg = <0x00a02000 0x1000>;
+                        interrupts = <0 92 0x04>;
+                        cache-unified;
+                        cache-level = <2>;
+                };
+
+                aips-bus@02000000 { /* AIPS1 */
+                        compatible = "fsl,aips-bus", "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x02000000 0x100000>;
+                        ranges;
+
+                        spba-bus@02000000 {
+                                compatible = "fsl,spba-bus", "simple-bus";
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+                                reg = <0x02000000 0x40000>;
+                                ranges;
+
+                                spdif@02004000 {
+                                        reg = <0x02004000 0x4000>;
+                                        interrupts = <0 52 0x04>;
+                                };
+
+                                ecspi@02008000 { /* eCSPI1 */
+                                        #address-cells = <1>;
+                                        #size-cells = <0>;
+                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+                                        reg = <0x02008000 0x4000>;
+                                        interrupts = <0 31 0x04>;
+                                        status = "disabled";
+                                };
+
+                                ecspi@0200c000 { /* eCSPI2 */
+                                        #address-cells = <1>;
+                                        #size-cells = <0>;
+                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+                                        reg = <0x0200c000 0x4000>;
+                                        interrupts = <0 32 0x04>;
+                                        status = "disabled";
+                                };
+
+                                ecspi@02010000 { /* eCSPI3 */
+                                        #address-cells = <1>;
+                                        #size-cells = <0>;
+                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+                                        reg = <0x02010000 0x4000>;
+                                        interrupts = <0 33 0x04>;
+                                        status = "disabled";
+                                };
+
+                                ecspi@02014000 { /* eCSPI4 */
+                                        #address-cells = <1>;
+                                        #size-cells = <0>;
+                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+                                        reg = <0x02014000 0x4000>;
+                                        interrupts = <0 34 0x04>;
+                                        status = "disabled";
+                                };
+
+                                ecspi@02018000 { /* eCSPI5 */
+                                        #address-cells = <1>;
+                                        #size-cells = <0>;
+                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+                                        reg = <0x02018000 0x4000>;
+                                        interrupts = <0 35 0x04>;
+                                        status = "disabled";
+                                };
+
+                                uart0: uart@02020000 { /* UART1 */
+                                        compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+                                        reg = <0x02020000 0x4000>;
+                                        interrupts = <0 26 0x04>;
+                                        status = "disabled";
+                                };
+
+                                esai@02024000 {
+                                        reg = <0x02024000 0x4000>;
+                                        interrupts = <0 51 0x04>;
+                                };
+
+                                ssi@02028000 { /* SSI1 */
+                                        reg = <0x02028000 0x4000>;
+                                        interrupts = <0 46 0x04>;
+                                };
+
+                                ssi@0202c000 { /* SSI2 */
+                                        reg = <0x0202c000 0x4000>;
+                                        interrupts = <0 47 0x04>;
+                                };
+
+                                ssi@02030000 { /* SSI3 */
+                                        reg = <0x02030000 0x4000>;
+                                        interrupts = <0 48 0x04>;
+                                };
+
+                                asrc@02034000 {
+                                        reg = <0x02034000 0x4000>;
+                                        interrupts = <0 50 0x04>;
+                                };
+
+                                spba@0203c000 {
+                                        reg = <0x0203c000 0x4000>;
+                                };
+                        };
+
+                        vpu@02040000 {
+                                reg = <0x02040000 0x3c000>;
+                                interrupts = <0 3 0x04 0 12 0x04>;
+                        };
+
+                        aipstz@0207c000 { /* AIPSTZ1 */
+                                reg = <0x0207c000 0x4000>;
+                        };
+
+                        pwm@02080000 { /* PWM1 */
+                                reg = <0x02080000 0x4000>;
+                                interrupts = <0 83 0x04>;
+                        };
+
+                        pwm@02084000 { /* PWM2 */
+                                reg = <0x02084000 0x4000>;
+                                interrupts = <0 84 0x04>;
+                        };
+
+                        pwm@02088000 { /* PWM3 */
+                                reg = <0x02088000 0x4000>;
+                                interrupts = <0 85 0x04>;
+                        };
+
+                        pwm@0208c000 { /* PWM4 */
+                                reg = <0x0208c000 0x4000>;
+                                interrupts = <0 86 0x04>;
+                        };
+
+                        flexcan@02090000 { /* CAN1 */
+                                reg = <0x02090000 0x4000>;
+                                interrupts = <0 110 0x04>;
+                        };
+
+                        flexcan@02094000 { /* CAN2 */
+                                reg = <0x02094000 0x4000>;
+                                interrupts = <0 111 0x04>;
+                        };
+
+                        gpt@02098000 {
+                                compatible = "fsl,imx6q-gpt";
+                                reg = <0x02098000 0x4000>;
+                                interrupts = <0 55 0x04>;
+                        };
+
+                        gpio0: gpio@0209c000 { /* GPIO1 */
+                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+                                reg = <0x0209c000 0x4000>;
+                                interrupts = <0 66 0x04 0 67 0x04>;
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+
+                        gpio1: gpio@020a0000 { /* GPIO2 */
+                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+                                reg = <0x020a0000 0x4000>;
+                                interrupts = <0 68 0x04 0 69 0x04>;
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+
+                        gpio2: gpio@020a4000 { /* GPIO3 */
+                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+                                reg = <0x020a4000 0x4000>;
+                                interrupts = <0 70 0x04 0 71 0x04>;
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+
+                        gpio3: gpio@020a8000 { /* GPIO4 */
+                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+                                reg = <0x020a8000 0x4000>;
+                                interrupts = <0 72 0x04 0 73 0x04>;
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+
+                        gpio4: gpio@020ac000 { /* GPIO5 */
+                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+                                reg = <0x020ac000 0x4000>;
+                                interrupts = <0 74 0x04 0 75 0x04>;
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+
+                        gpio5: gpio@020b0000 { /* GPIO6 */
+                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+                                reg = <0x020b0000 0x4000>;
+                                interrupts = <0 76 0x04 0 77 0x04>;
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+
+                        gpio6: gpio@020b4000 { /* GPIO7 */
+                                compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+                                reg = <0x020b4000 0x4000>;
+                                interrupts = <0 78 0x04 0 79 0x04>;
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <1>;
+                        };
+
+                        kpp@020b8000 {
+                                reg = <0x020b8000 0x4000>;
+                                interrupts = <0 82 0x04>;
+                        };
+
+                        wdog@020bc000 { /* WDOG1 */
+                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+                                reg = <0x020bc000 0x4000>;
+                                interrupts = <0 80 0x04>;
+                                status = "disabled";
+                        };
+
+                        wdog@020c0000 { /* WDOG2 */
+                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+                                reg = <0x020c0000 0x4000>;
+                                interrupts = <0 81 0x04>;
+                                status = "disabled";
+                        };
+
+                        ccm@020c4000 {
+                                compatible = "fsl,imx6q-ccm";
+                                reg = <0x020c4000 0x4000>;
+                                interrupts = <0 87 0x04 0 88 0x04>;
+                        };
+
+                        anatop@020c8000 {
+                                compatible = "fsl,imx6q-anatop";
+                                reg = <0x020c8000 0x1000>;
+                                interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+                        };
+
+                        usbphy@020c9000 { /* USBPHY1 */
+                                reg = <0x020c9000 0x1000>;
+                                interrupts = <0 44 0x04>;
+                        };
+
+                        usbphy@020ca000 { /* USBPHY2 */
+                                reg = <0x020ca000 0x1000>;
+                                interrupts = <0 45 0x04>;
+                        };
+
+                        snvs@020cc000 {
+                                reg = <0x020cc000 0x4000>;
+                                interrupts = <0 19 0x04 0 20 0x04>;
+                        };
+
+                        epit@020d0000 { /* EPIT1 */
+                                reg = <0x020d0000 0x4000>;
+                                interrupts = <0 56 0x04>;
+                        };
+
+                        epit@020d4000 { /* EPIT2 */
+                                reg = <0x020d4000 0x4000>;
+                                interrupts = <0 57 0x04>;
+                        };
+
+                        src@020d8000 {
+                                compatible = "fsl,imx6q-src";
+                                reg = <0x020d8000 0x4000>;
+                                interrupts = <0 91 0x04 0 96 0x04>;
+                        };
+
+                        gpc@020dc000 {
+                                compatible = "fsl,imx6q-gpc";
+                                reg = <0x020dc000 0x4000>;
+                                interrupts = <0 89 0x04 0 90 0x04>;
+                        };
+
+                        iomuxc@020e0000 {
+                                reg = <0x020e0000 0x4000>;
+                        };
+
+                        dcic@020e4000 { /* DCIC1 */
+                                reg = <0x020e4000 0x4000>;
+                                interrupts = <0 124 0x04>;
+                        };
+
+                        dcic@020e8000 { /* DCIC2 */
+                                reg = <0x020e8000 0x4000>;
+                                interrupts = <0 125 0x04>;
+                        };
+
+                        sdma@020ec000 {
+                                compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+                                reg = <0x020ec000 0x4000>;
+                                interrupts = <0 2 0x04>;
+                        };
+                };
+
+                aips-bus@02100000 { /* AIPS2 */
+                        compatible = "fsl,aips-bus", "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x02100000 0x100000>;
+                        ranges;
+
+                        caam@02100000 {
+                                reg = <0x02100000 0x40000>;
+                                interrupts = <0 105 0x04 0 106 0x04>;
+                        };
+
+                        aipstz@0217c000 { /* AIPSTZ2 */
+                                reg = <0x0217c000 0x4000>;
+                        };
+
+                        enet@02188000 {
+                                compatible = "fsl,imx6q-fec";
+                                reg = <0x02188000 0x4000>;
+                                interrupts = <0 118 0x04 0 119 0x04>;
+                                status = "disabled";
+                        };
+
+                        mlb@0218c000 {
+                                reg = <0x0218c000 0x4000>;
+                                interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+                        };
+
+                        usdhc@02190000 { /* uSDHC1 */
+                                compatible = "fsl,imx6q-usdhc";
+                                reg = <0x02190000 0x4000>;
+                                interrupts = <0 22 0x04>;
+                                status = "disabled";
+                        };
+
+                        usdhc@02194000 { /* uSDHC2 */
+                                compatible = "fsl,imx6q-usdhc";
+                                reg = <0x02194000 0x4000>;
+                                interrupts = <0 23 0x04>;
+                                status = "disabled";
+                        };
+
+                        usdhc@02198000 { /* uSDHC3 */
+                                compatible = "fsl,imx6q-usdhc";
+                                reg = <0x02198000 0x4000>;
+                                interrupts = <0 24 0x04>;
+                                status = "disabled";
+                        };
+
+                        usdhc@0219c000 { /* uSDHC4 */
+                                compatible = "fsl,imx6q-usdhc";
+                                reg = <0x0219c000 0x4000>;
+                                interrupts = <0 25 0x04>;
+                                status = "disabled";
+                        };
+
+                        i2c@021a0000 { /* I2C1 */
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+                                reg = <0x021a0000 0x4000>;
+                                interrupts = <0 36 0x04>;
+                                status = "disabled";
+                        };
+
+                        i2c@021a4000 { /* I2C2 */
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+                                reg = <0x021a4000 0x4000>;
+                                interrupts = <0 37 0x04>;
+                                status = "disabled";
+                        };
+
+                        i2c@021a8000 { /* I2C3 */
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+                                reg = <0x021a8000 0x4000>;
+                                interrupts = <0 38 0x04>;
+                                status = "disabled";
+                        };
+
+                        romcp@021ac000 {
+                                reg = <0x021ac000 0x4000>;
+                        };
+
+                        mmdc@021b0000 { /* MMDC0 */
+                                compatible = "fsl,imx6q-mmdc";
+                                reg = <0x021b0000 0x4000>;
+                        };
+
+                        mmdc@021b4000 { /* MMDC1 */
+                                reg = <0x021b4000 0x4000>;
+                        };
+
+                        weim@021b8000 {
+                                reg = <0x021b8000 0x4000>;
+                                interrupts = <0 14 0x04>;
+                        };
+
+                        ocotp@021bc000 {
+                                reg = <0x021bc000 0x4000>;
+                        };
+
+                        ocotp@021c0000 {
+                                reg = <0x021c0000 0x4000>;
+                                interrupts = <0 21 0x04>;
+                        };
+
+                        tzasc@021d0000 { /* TZASC1 */
+                                reg = <0x021d0000 0x4000>;
+                                interrupts = <0 108 0x04>;
+                        };
+
+                        tzasc@021d4000 { /* TZASC2 */
+                                reg = <0x021d4000 0x4000>;
+                                interrupts = <0 109 0x04>;
+                        };
+
+                        audmux@021d8000 {
+                                reg = <0x021d8000 0x4000>;
+                        };
+
+                        mipi@021dc000 { /* MIPI-CSI */
+                                reg = <0x021dc000 0x4000>;
+                        };
+
+                        mipi@021e0000 { /* MIPI-DSI */
+                                reg = <0x021e0000 0x4000>;
+                        };
+
+                        vdoa@021e4000 {
+                                reg = <0x021e4000 0x4000>;
+                                interrupts = <0 18 0x04>;
+                        };
+
+                        uart1: uart@021e8000 { /* UART2 */
+                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+                                reg = <0x021e8000 0x4000>;
+                                interrupts = <0 27 0x04>;
+                                status = "disabled";
+                        };
+
+                        uart2: uart@021ec000 { /* UART3 */
+                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+                                reg = <0x021ec000 0x4000>;
+                                interrupts = <0 28 0x04>;
+                                status = "disabled";
+                        };
+
+                        uart3: uart@021f0000 { /* UART4 */
+                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+                                reg = <0x021f0000 0x4000>;
+                                interrupts = <0 29 0x04>;
+                                status = "disabled";
+                        };
+
+                        uart4: uart@021f4000 { /* UART5 */
+                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+                                reg = <0x021f4000 0x4000>;
+                                interrupts = <0 30 0x04>;
+                                status = "disabled";
+                        };
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
new file mode 100644
index 000000000000..f0a8c2068ea7
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -0,0 +1,249 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+        model = "Picochip picoXcell PC3X2";
+        compatible = "picochip,pc3x2";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpu@0 {
+                        compatible = "arm,1176jz-s";
+                        clock-frequency = <400000000>;
+                        reg = <0>;
+                        d-cache-line-size = <32>;
+                        d-cache-size = <32768>;
+                        i-cache-line-size = <32>;
+                        i-cache-size = <32768>;
+                };
+        };
+
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                pclk: clock@0 {
+                        compatible = "fixed-clock";
+                        clock-outputs = "bus", "pclk";
+                        clock-frequency = <200000000>;
+                        ref-clock = <&ref_clk>, "ref";
+                };
+        };
+
+        paxi {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges = <0 0x80000000 0x400000>;
+
+                emac: gem@30000 {
+                        compatible = "cadence,gem";
+                        reg = <0x30000 0x10000>;
+                        interrupts = <31>;
+                };
+
+                dmac1: dmac@40000 {
+                        compatible = "snps,dw-dmac";
+                        reg = <0x40000 0x10000>;
+                        interrupts = <25>;
+                };
+
+                dmac2: dmac@50000 {
+                        compatible = "snps,dw-dmac";
+                        reg = <0x50000 0x10000>;
+                        interrupts = <26>;
+                };
+
+                vic0: interrupt-controller@60000 {
+                        compatible = "arm,pl192-vic";
+                        interrupt-controller;
+                        reg = <0x60000 0x1000>;
+                        #interrupt-cells = <1>;
+                };
+
+                vic1: interrupt-controller@64000 {
+                        compatible = "arm,pl192-vic";
+                        interrupt-controller;
+                        reg = <0x64000 0x1000>;
+                        #interrupt-cells = <1>;
+                };
+
+                fuse: picoxcell-fuse@80000 {
+                        compatible = "picoxcell,fuse-pc3x2";
+                        reg = <0x80000 0x10000>;
+                };
+
+                ssi: picoxcell-spi@90000 {
+                        compatible = "picoxcell,spi";
+                        reg = <0x90000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <10>;
+                };
+
+                ipsec: spacc@100000 {
+                        compatible = "picochip,spacc-ipsec";
+                        reg = <0x100000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <24>;
+                        ref-clock = <&pclk>, "ref";
+                };
+
+                srtp: spacc@140000 {
+                        compatible = "picochip,spacc-srtp";
+                        reg = <0x140000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <23>;
+                };
+
+                l2_engine: spacc@180000 {
+                        compatible = "picochip,spacc-l2";
+                        reg = <0x180000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <22>;
+                        ref-clock = <&pclk>, "ref";
+                };
+
+                apb {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0 0x200000 0x80000>;
+
+                        rtc0: rtc@00000 {
+                                compatible = "picochip,pc3x2-rtc";
+                                clock-freq = <200000000>;
+                                reg = <0x00000 0xf>;
+                                interrupt-parent = <&vic1>;
+                                interrupts = <8>;
+                        };
+
+                        timer0: timer@10000 {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <4>;
+                                clock-freq = <200000000>;
+                                reg = <0x10000 0x14>;
+                        };
+
+                        timer1: timer@10014 {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <5>;
+                                clock-freq = <200000000>;
+                                reg = <0x10014 0x14>;
+                        };
+
+                        timer2: timer@10028 {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <6>;
+                                clock-freq = <200000000>;
+                                reg = <0x10028 0x14>;
+                        };
+
+                        timer3: timer@1003c {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <7>;
+                                clock-freq = <200000000>;
+                                reg = <0x1003c 0x14>;
+                        };
+
+                        gpio: gpio@20000 {
+                                compatible = "snps,dw-apb-gpio";
+                                reg = <0x20000 0x1000>;
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                reg-io-width = <4>;
+
+                                banka: gpio-controller@0 {
+                                        compatible = "snps,dw-apb-gpio-bank";
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        gpio-generic,nr-gpio = <8>;
+
+                                        regoffset-dat = <0x50>;
+                                        regoffset-set = <0x00>;
+                                        regoffset-dirout = <0x04>;
+                                };
+
+                                bankb: gpio-controller@1 {
+                                        compatible = "snps,dw-apb-gpio-bank";
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        gpio-generic,nr-gpio = <8>;
+
+                                        regoffset-dat = <0x54>;
+                                        regoffset-set = <0x0c>;
+                                        regoffset-dirout = <0x10>;
+                                };
+                        };
+
+                        uart0: uart@30000 {
+                                compatible = "snps,dw-apb-uart";
+                                reg = <0x30000 0x1000>;
+                                interrupt-parent = <&vic1>;
+                                interrupts = <10>;
+                                clock-frequency = <3686400>;
+                                reg-shift = <2>;
+                                reg-io-width = <4>;
+                        };
+
+                        uart1: uart@40000 {
+                                compatible = "snps,dw-apb-uart";
+                                reg = <0x40000 0x1000>;
+                                interrupt-parent = <&vic1>;
+                                interrupts = <9>;
+                                clock-frequency = <3686400>;
+                                reg-shift = <2>;
+                                reg-io-width = <4>;
+                        };
+
+                        wdog: watchdog@50000 {
+                                compatible = "snps,dw-apb-wdg";
+                                reg = <0x50000 0x10000>;
+                                interrupt-parent = <&vic0>;
+                                interrupts = <11>;
+                                bus-clock = <&pclk>, "bus";
+                        };
+                };
+        };
+
+        rwid-axi {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                ranges;
+
+                ebi@50000000 {
+                        compatible = "simple-bus";
+                        #address-cells = <2>;
+                        #size-cells = <1>;
+                        ranges = <0 0 0x40000000 0x08000000
+                                  1 0 0x48000000 0x08000000
+                                  2 0 0x50000000 0x08000000
+                                  3 0 0x58000000 0x08000000>;
+                };
+
+                axi2pico@c0000000 {
+                        compatible = "picochip,axi2pico-pc3x2";
+                        reg = <0xc0000000 0x10000>;
+                        interrupts = <13 14 15 16 17 18 19 20 21>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
new file mode 100644
index 000000000000..daa962d191e6
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -0,0 +1,365 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+        model = "Picochip picoXcell PC3X3";
+        compatible = "picochip,pc3x3";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpu@0 {
+                        compatible = "arm,1176jz-s";
+                        cpu-clock = <&arm_clk>, "cpu";
+                        reg = <0>;
+                        d-cache-line-size = <32>;
+                        d-cache-size = <32768>;
+                        i-cache-line-size = <32>;
+                        i-cache-size = <32768>;
+                };
+        };
+
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                clkgate: clkgate@800a0048 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x800a0048 4>;
+                        compatible = "picochip,pc3x3-clk-gate";
+
+                        tzprot_clk: clock@0 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <0>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        spi_clk: clock@1 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <1>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        dmac0_clk: clock@2 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <2>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        dmac1_clk: clock@3 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <3>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        ebi_clk: clock@4 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <4>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        ipsec_clk: clock@5 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <5>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        l2_clk: clock@6 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <6>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        trng_clk: clock@7 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <7>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        fuse_clk: clock@8 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <8>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+
+                        otp_clk: clock@9 {
+                                compatible = "picochip,pc3x3-gated-clk";
+                                clock-outputs = "bus";
+                                picochip,clk-disable-bit = <9>;
+                                clock-frequency = <200000000>;
+                                ref-clock = <&ref_clk>, "ref";
+                        };
+                };
+
+                arm_clk: clock@11 {
+                        compatible = "picochip,pc3x3-pll";
+                        reg = <0x800a0050 0x8>;
+                        picochip,min-freq = <140000000>;
+                        picochip,max-freq = <700000000>;
+                        ref-clock = <&ref_clk>, "ref";
+                        clock-outputs = "cpu";
+                };
+
+                pclk: clock@12 {
+                        compatible = "fixed-clock";
+                        clock-outputs = "bus", "pclk";
+                        clock-frequency = <200000000>;
+                        ref-clock = <&ref_clk>, "ref";
+                };
+        };
+
+        paxi {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges = <0 0x80000000 0x400000>;
+
+                emac: gem@30000 {
+                        compatible = "cadence,gem";
+                        reg = <0x30000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <31>;
+                };
+
+                dmac1: dmac@40000 {
+                        compatible = "snps,dw-dmac";
+                        reg = <0x40000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <25>;
+                };
+
+                dmac2: dmac@50000 {
+                        compatible = "snps,dw-dmac";
+                        reg = <0x50000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <26>;
+                };
+
+                vic0: interrupt-controller@60000 {
+                        compatible = "arm,pl192-vic";
+                        interrupt-controller;
+                        reg = <0x60000 0x1000>;
+                        #interrupt-cells = <1>;
+                };
+
+                vic1: interrupt-controller@64000 {
+                        compatible = "arm,pl192-vic";
+                        interrupt-controller;
+                        reg = <0x64000 0x1000>;
+                        #interrupt-cells = <1>;
+                };
+
+                fuse: picoxcell-fuse@80000 {
+                        compatible = "picoxcell,fuse-pc3x3";
+                        reg = <0x80000 0x10000>;
+                };
+
+                ssi: picoxcell-spi@90000 {
+                        compatible = "picoxcell,spi";
+                        reg = <0x90000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <10>;
+                };
+
+                ipsec: spacc@100000 {
+                        compatible = "picochip,spacc-ipsec";
+                        reg = <0x100000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <24>;
+                        ref-clock = <&ipsec_clk>, "ref";
+                };
+
+                srtp: spacc@140000 {
+                        compatible = "picochip,spacc-srtp";
+                        reg = <0x140000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <23>;
+                };
+
+                l2_engine: spacc@180000 {
+                        compatible = "picochip,spacc-l2";
+                        reg = <0x180000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <22>;
+                        ref-clock = <&l2_clk>, "ref";
+                };
+
+                apb {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0 0x200000 0x80000>;
+
+                        rtc0: rtc@00000 {
+                                compatible = "picochip,pc3x2-rtc";
+                                clock-freq = <200000000>;
+                                reg = <0x00000 0xf>;
+                                interrupt-parent = <&vic0>;
+                                interrupts = <8>;
+                        };
+
+                        timer0: timer@10000 {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <4>;
+                                clock-freq = <200000000>;
+                                reg = <0x10000 0x14>;
+                        };
+
+                        timer1: timer@10014 {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <5>;
+                                clock-freq = <200000000>;
+                                reg = <0x10014 0x14>;
+                        };
+
+                        gpio: gpio@20000 {
+                                compatible = "snps,dw-apb-gpio";
+                                reg = <0x20000 0x1000>;
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                reg-io-width = <4>;
+
+                                banka: gpio-controller@0 {
+                                        compatible = "snps,dw-apb-gpio-bank";
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        gpio-generic,nr-gpio = <8>;
+
+                                        regoffset-dat = <0x50>;
+                                        regoffset-set = <0x00>;
+                                        regoffset-dirout = <0x04>;
+                                };
+
+                                bankb: gpio-controller@1 {
+                                        compatible = "snps,dw-apb-gpio-bank";
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        gpio-generic,nr-gpio = <16>;
+
+                                        regoffset-dat = <0x54>;
+                                        regoffset-set = <0x0c>;
+                                        regoffset-dirout = <0x10>;
+                                };
+
+                                bankd: gpio-controller@2 {
+                                        compatible = "snps,dw-apb-gpio-bank";
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        gpio-generic,nr-gpio = <30>;
+
+                                        regoffset-dat = <0x5c>;
+                                        regoffset-set = <0x24>;
+                                        regoffset-dirout = <0x28>;
+                                };
+                        };
+
+                        uart0: uart@30000 {
+                                compatible = "snps,dw-apb-uart";
+                                reg = <0x30000 0x1000>;
+                                interrupt-parent = <&vic1>;
+                                interrupts = <10>;
+                                clock-frequency = <3686400>;
+                                reg-shift = <2>;
+                                reg-io-width = <4>;
+                        };
+
+                        uart1: uart@40000 {
+                                compatible = "snps,dw-apb-uart";
+                                reg = <0x40000 0x1000>;
+                                interrupt-parent = <&vic1>;
+                                interrupts = <9>;
+                                clock-frequency = <3686400>;
+                                reg-shift = <2>;
+                                reg-io-width = <4>;
+                        };
+
+                        wdog: watchdog@50000 {
+                                compatible = "snps,dw-apb-wdg";
+                                reg = <0x50000 0x10000>;
+                                interrupt-parent = <&vic0>;
+                                interrupts = <11>;
+                                bus-clock = <&pclk>, "bus";
+                        };
+
+                        timer2: timer@60000 {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <6>;
+                                clock-freq = <200000000>;
+                                reg = <0x60000 0x14>;
+                        };
+
+                        timer3: timer@60014 {
+                                compatible = "picochip,pc3x2-timer";
+                                interrupt-parent = <&vic0>;
+                                interrupts = <7>;
+                                clock-freq = <200000000>;
+                                reg = <0x60014 0x14>;
+                        };
+                };
+        };
+
+        rwid-axi {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                ranges;
+
+                ebi@50000000 {
+                        compatible = "simple-bus";
+                        #address-cells = <2>;
+                        #size-cells = <1>;
+                        ranges = <0 0 0x40000000 0x08000000
+                                  1 0 0x48000000 0x08000000
+                                  2 0 0x50000000 0x08000000
+                                  3 0 0x58000000 0x08000000>;
+                };
+
+                axi2pico@c0000000 {
+                        compatible = "picochip,axi2pico-pc3x3";
+                        reg = <0xc0000000 0x10000>;
+                        interrupt-parent = <&vic0>;
+                        interrupts = <13 14 15 16 17 18 19 20 21>;
+                };
+
+                otp@ffff8000 {
+                        compatible = "picochip,otp-pc3x3";
+                        reg = <0xffff8000 0x8000>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 000000000000..1297414dd649
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,86 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+        model = "Picochip PC7302 (PC3X2)";
+        compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+        memory {
+                device_type = "memory";
+                reg = <0x0 0x08000000>;
+        };
+
+        chosen {
+                linux,stdout-path = &uart0;
+        };
+
+        clocks {
+                ref_clk: clock@1 {
+                        compatible = "fixed-clock";
+                        clock-outputs = "ref";
+                        clock-frequency = <20000000>;
+                };
+        };
+
+        rwid-axi {
+                ebi@50000000 {
+                        nand: gpio-nand@2,0 {
+                                compatible = "gpio-control-nand";
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+                                reg = <2 0x0000 0x1000>;
+                                bus-clock = <&pclk>, "bus";
+                                gpio-control-nand,io-sync-reg =
+                                        <0x00000000 0x80220000>;
+
+                                gpios = <&banka 1 0     /* rdy */
+                                         &banka 2 0     /* nce */
+                                         &banka 3 0     /* ale */
+                                         &banka 4 0     /* cle */
+                                         0              /* nwp */>;
+
+                                boot@100000 {
+                                        label = "Boot";
+                                        reg = <0x100000 0x80000>;
+                                };
+
+                                redundant-boot@200000 {
+                                        label = "Redundant Boot";
+                                        reg = <0x200000 0x80000>;
+                                };
+
+                                boot-env@300000 {
+                                        label = "Boot Evironment";
+                                        reg = <0x300000 0x20000>;
+                                };
+
+                                redundant-boot-env@320000 {
+                                        label = "Redundant Boot Environment";
+                                        reg = <0x300000 0x20000>;
+                                };
+
+                                kernel@380000 {
+                                        label = "Kernel";
+                                        reg = <0x380000 0x800000>;
+                                };
+
+                                fs@b80000 {
+                                        label = "File System";
+                                        reg = <0xb80000 0xf480000>;
+                                };
+                        };
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 000000000000..9e317a4f431c
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,92 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+        model = "Picochip PC7302 (PC3X3)";
+        compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+        memory {
+                device_type = "memory";
+                reg = <0x0 0x08000000>;
+        };
+
+        chosen {
+                linux,stdout-path = &uart0;
+        };
+
+        clocks {
+                ref_clk: clock@10 {
+                        compatible = "fixed-clock";
+                        clock-outputs = "ref";
+                        clock-frequency = <20000000>;
+                };
+
+                clkgate: clkgate@800a0048 {
+                        clock@4 {
+                                picochip,clk-no-disable;
+                        };
+                };
+        };
+
+        rwid-axi {
+                ebi@50000000 {
+                        nand: gpio-nand@2,0 {
+                                compatible = "gpio-control-nand";
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+                                reg = <2 0x0000 0x1000>;
+                                bus-clock = <&ebi_clk>, "bus";
+                                gpio-control-nand,io-sync-reg =
+                                        <0x00000000 0x80220000>;
+
+                                gpios = <&banka 1 0     /* rdy */
+                                         &banka 2 0     /* nce */
+                                         &banka 3 0     /* ale */
+                                         &banka 4 0     /* cle */
+                                         0              /* nwp */>;
+
+                                boot@100000 {
+                                        label = "Boot";
+                                        reg = <0x100000 0x80000>;
+                                };
+
+                                redundant-boot@200000 {
+                                        label = "Redundant Boot";
+                                        reg = <0x200000 0x80000>;
+                                };
+
+                                boot-env@300000 {
+                                        label = "Boot Evironment";
+                                        reg = <0x300000 0x20000>;
+                                };
+
+                                redundant-boot-env@320000 {
+                                        label = "Redundant Boot Environment";
+                                        reg = <0x300000 0x20000>;
+                                };
+
+                                kernel@380000 {
+                                        label = "Kernel";
+                                        reg = <0x380000 0x800000>;
+                                };
+
+                                fs@b80000 {
+                                        label = "File System";
+                                        reg = <0xb80000 0xf480000>;
+                                };
+                        };
+                };
+        };
+};
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 434edccdf7f3..1db1143a9483 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -102,7 +102,14 @@
 
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
 extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
+#else
+static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask)
+{
+        return -ENODEV;
+}
+#endif
 
 struct l2x0_regs {
         unsigned long phy_base;
@@ -121,6 +128,6 @@ struct l2x0_regs {
 
 extern struct l2x0_regs l2x0_saved_regs;
 
-#endif
+#endif /* __ASSEMBLY__ */
 
 #endif
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
new file mode 100644
index 000000000000..986958a5a720
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile
@@ -0,0 +1,6 @@
+obj-y                                   := clock.o highbank.o system.o
+obj-$(CONFIG_DEBUG_HIGHBANK_UART)       += lluart.o
+obj-$(CONFIG_SMP)                       += platsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)              += localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
+obj-$(CONFIG_PM_SLEEP)                  += pm.o
diff --git a/arch/arm/mach-highbank/Makefile.boot b/arch/arm/mach-highbank/Makefile.boot
new file mode 100644
index 000000000000..dae9661a7689
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y      := 0x00008000
diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c
new file mode 100644
index 000000000000..c25a2ae4fde1
--- /dev/null
+++ b/arch/arm/mach-highbank/clock.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+
+struct clk {
+        unsigned long rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+        return 0;
+}
+
+void clk_disable(struct clk *clk)
+{}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        return 0;
+}
+
+static struct clk eclk = { .rate = 200000000 };
+static struct clk pclk = { .rate = 150000000 };
+
+static struct clk_lookup lookups[] = {
+        { .clk = &pclk, .con_id = "apb_pclk", },
+        { .clk = &pclk, .dev_id = "sp804", },
+        { .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
+        { .clk = &pclk, .dev_id = "fff36000.serial", },
+};
+
+void __init highbank_clocks_init(void)
+{
+        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
new file mode 100644
index 000000000000..7e33fc94cd1e
--- /dev/null
+++ b/arch/arm/mach-highbank/core.h
@@ -0,0 +1,9 @@
+extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
+extern void highbank_clocks_init(void);
+extern void __iomem *scu_base_addr;
+#ifdef CONFIG_DEBUG_HIGHBANK_UART
+extern void highbank_lluart_map_io(void);
+#else
+static inline void highbank_lluart_map_io(void) {}
+#endif
+
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
new file mode 100644
index 000000000000..b82dcf08e747
--- /dev/null
+++ b/arch/arm/mach-highbank/highbank.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/unified.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void __iomem *sregs_base;
+
+#define HB_SCU_VIRT_BASE        0xfee00000
+void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
+
+static struct map_desc scu_io_desc __initdata = {
+        .virtual        = HB_SCU_VIRT_BASE,
+        .pfn            = 0, /* run-time */
+        .length         = SZ_4K,
+        .type           = MT_DEVICE,
+};
+
+static void __init highbank_scu_map_io(void)
+{
+        unsigned long base;
+
+        /* Get SCU base */
+        asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+        scu_io_desc.pfn = __phys_to_pfn(base);
+        iotable_init(&scu_io_desc, 1);
+}
+
+static void __init highbank_map_io(void)
+{
+        highbank_scu_map_io();
+        highbank_lluart_map_io();
+}
+
+#define HB_JUMP_TABLE_PHYS(cpu)         (0x40 + (0x10 * (cpu)))
+#define HB_JUMP_TABLE_VIRT(cpu)         phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
+
+void highbank_set_cpu_jump(int cpu, void *jump_addr)
+{
+        writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+        __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
+        outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
+                          HB_JUMP_TABLE_PHYS(cpu) + 15);
+}
+
+const static struct of_device_id irq_match[] = {
+        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+        {}
+};
+
+static void __init highbank_init_irq(void)
+{
+        of_irq_init(irq_match);
+        l2x0_of_init(0, ~0UL);
+}
+
+static void __init highbank_timer_init(void)
+{
+        int irq;
+        struct device_node *np;
+        void __iomem *timer_base;
+
+        /* Map system registers */
+        np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+        sregs_base = of_iomap(np, 0);
+        WARN_ON(!sregs_base);
+
+        np = of_find_compatible_node(NULL, NULL, "arm,sp804");
+        timer_base = of_iomap(np, 0);
+        WARN_ON(!timer_base);
+        irq = irq_of_parse_and_map(np, 0);
+
+        highbank_clocks_init();
+
+        sp804_clocksource_init(timer_base + 0x20, "timer1");
+        sp804_clockevents_init(timer_base, irq, "timer0");
+}
+
+static struct sys_timer highbank_timer = {
+        .init = highbank_timer_init,
+};
+
+static void highbank_power_off(void)
+{
+        hignbank_set_pwr_shutdown();
+        scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+        while (1)
+                cpu_do_idle();
+}
+
+static void __init highbank_init(void)
+{
+        pm_power_off = highbank_power_off;
+
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *highbank_match[] __initconst = {
+        "calxeda,highbank",
+        NULL,
+};
+
+DT_MACHINE_START(HIGHBANK, "Highbank")
+        .map_io         = highbank_map_io,
+        .init_irq       = highbank_init_irq,
+        .timer          = &highbank_timer,
+        .init_machine   = highbank_init,
+        .dt_compat      = highbank_match,
+MACHINE_END
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
new file mode 100644
index 000000000000..977cebbea580
--- /dev/null
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+        return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+        flush_cache_all();
+
+        highbank_set_cpu_jump(cpu, secondary_startup);
+        scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+        cpu_do_idle();
+
+        /* We should never return from idle */
+        panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+        /*
+         * CPU0 should not be shut down via hotplug.  cpu_idle can WFI
+         * or a proper shutdown or hibernate should be used.
+         */
+        return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-highbank/include/mach/debug-macro.S b/arch/arm/mach-highbank/include/mach/debug-macro.S
new file mode 100644
index 000000000000..cb57fe5bcd04
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+                .macro  addruart,rp,rv,tmp
+                movw    \rv, #0x6000
+                movt    \rv, #0xfee3
+                movw    \rp, #0x6000
+                movt    \rp, #0xfff3
+                .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
new file mode 100644
index 000000000000..73c11297509e
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -0,0 +1,7 @@
+#include <asm/hardware/entry-macro-gic.S>
+
+        .macro  disable_fiq
+        .endm
+
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
diff --git a/arch/arm/mach-highbank/include/mach/gpio.h b/arch/arm/mach-highbank/include/mach/gpio.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/gpio.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-highbank/include/mach/io.h b/arch/arm/mach-highbank/include/mach/io.h
new file mode 100644
index 000000000000..70cfa3ba7697
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/io.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define __io(a)         ({ (void)(a); __typesafe_io(0); })
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/irqs.h b/arch/arm/mach-highbank/include/mach/irqs.h
new file mode 100644
index 000000000000..9746aab14e9a
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/irqs.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define NR_IRQS                 192
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/memory.h b/arch/arm/mach-highbank/include/mach/memory.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/memory.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
new file mode 100644
index 000000000000..7e8192296cae
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+
+extern void arch_reset(char mode, const char *cmd);
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h
new file mode 100644
index 000000000000..88dac7a55a97
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE         1000000
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/uncompress.h b/arch/arm/mach-highbank/include/mach/uncompress.h
new file mode 100644
index 000000000000..bbe20e696325
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/uncompress.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h
new file mode 100644
index 000000000000..1969e954277a
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/vmalloc.h
@@ -0,0 +1 @@
+#define VMALLOC_END             0xFEE00000UL
diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c
new file mode 100644
index 000000000000..371575019f33
--- /dev/null
+++ b/arch/arm/mach-highbank/lluart.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+
+#define HB_DEBUG_LL_PHYS_BASE   0xfff36000
+#define HB_DEBUG_LL_VIRT_BASE   0xfee36000
+
+static struct map_desc lluart_io_desc __initdata = {
+        .virtual        = HB_DEBUG_LL_VIRT_BASE,
+        .pfn            = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
+        .length         = SZ_4K,
+        .type           = MT_DEVICE,
+};
+
+void __init highbank_lluart_map_io(void)
+{
+        iotable_init(&lluart_io_desc, 1);
+}
diff --git a/arch/arm/mach-highbank/localtimer.c b/arch/arm/mach-highbank/localtimer.c
new file mode 100644
index 000000000000..5a00e7945fdf
--- /dev/null
+++ b/arch/arm/mach-highbank/localtimer.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+        struct device_node *np;
+
+        np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+        if (!twd_base) {
+                twd_base = of_iomap(np, 0);
+                WARN_ON(!twd_base);
+        }
+        evt->irq = irq_of_parse_and_map(np, 0);
+        twd_timer_setup(evt);
+        return 0;
+}
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
new file mode 100644
index 000000000000..d01364c72b45
--- /dev/null
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+        gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+        gic_raise_softirq(cpumask_of(cpu), 0);
+        return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+        unsigned int i, ncores;
+
+        ncores = scu_get_core_count(scu_base_addr);
+
+        /* sanity check */
+        if (ncores > NR_CPUS) {
+                printk(KERN_WARNING
+                       "highbank: no. of cores (%d) greater than configured "
+                       "maximum of %d - clipping\n",
+                       ncores, NR_CPUS);
+                ncores = NR_CPUS;
+        }
+
+        for (i = 0; i < ncores; i++)
+                set_cpu_possible(i, true);
+
+        set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+        int i;
+
+        scu_enable(scu_base_addr);
+
+        /*
+         * Write the address of secondary startup into the jump table
+         * The cores are in wfi and wait until they receive a soft interrupt
+         * and a non-zero value to jump to. Then the secondary CPU branches
+         * to this address.
+         */
+        for (i = 1; i < max_cpus; i++)
+                highbank_set_cpu_jump(i, secondary_startup);
+}
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
new file mode 100644
index 000000000000..33b3beb89982
--- /dev/null
+++ b/arch/arm/mach-highbank/pm.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+
+#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+static int highbank_suspend_finish(unsigned long val)
+{
+        cpu_do_idle();
+        return 0;
+}
+
+static int highbank_pm_enter(suspend_state_t state)
+{
+        hignbank_set_pwr_suspend();
+        highbank_set_cpu_jump(0, cpu_resume);
+
+        scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+        cpu_suspend(0, highbank_suspend_finish);
+
+        return 0;
+}
+
+static const struct platform_suspend_ops highbank_pm_ops = {
+        .enter = highbank_pm_enter,
+        .valid = suspend_valid_only_mem,
+};
+
+static int __init highbank_pm_init(void)
+{
+        suspend_set_ops(&highbank_pm_ops);
+        return 0;
+}
+module_init(highbank_pm_init);
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
new file mode 100644
index 000000000000..0e913389f445
--- /dev/null
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _MACH_HIGHBANK__SYSREGS_H_
+#define _MACH_HIGHBANK__SYSREGS_H_
+
+#include <linux/io.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_SREG_A9_PWR_REQ              0xf00
+#define HB_SREG_A9_BOOT_STAT            0xf04
+#define HB_SREG_A9_BOOT_DATA            0xf08
+
+#define HB_PWR_SUSPEND                  0
+#define HB_PWR_SOFT_RESET               1
+#define HB_PWR_HARD_RESET               2
+#define HB_PWR_SHUTDOWN                 3
+
+static inline void hignbank_set_pwr_suspend(void)
+{
+        writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_shutdown(void)
+{
+        writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_soft_reset(void)
+{
+        writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_hard_reset(void)
+{
+        writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+#endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
new file mode 100644
index 000000000000..53f0c4c5ef1c
--- /dev/null
+++ b/arch/arm/mach-highbank/system.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/proc-fns.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void arch_reset(char mode, const char *cmd)
+{
+        if (mode == 'h')
+                hignbank_set_pwr_hard_reset();
+        else
+                hignbank_set_pwr_soft_reset();
+
+        scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+        cpu_do_idle();
+}
+
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e605900ffe1d..5f7f9c2a34ae 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
 config IMX_HAVE_DMA_V1
         bool
+
+config HAVE_IMX_GPC
+        bool
+
+config HAVE_IMX_MMDC
+        bool
+
+config HAVE_IMX_SRC
+        bool
+
 #
 # ARCH_MX31 and ARCH_MX35 are left for compatibility
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
@@ -64,6 +74,7 @@ config SOC_IMX31
         select ARCH_MXC_AUDMUX_V2
         select ARCH_MX31
         select MXC_AVIC
+        select SMP_ON_UP if SMP
 
 config SOC_IMX35
         bool
@@ -73,6 +84,7 @@ config SOC_IMX35
         select HAVE_EPIT
         select ARCH_MX35
         select MXC_AVIC
+        select SMP_ON_UP if SMP
 
 
 if ARCH_IMX_V4_V5
@@ -341,7 +353,7 @@ config MACH_IMX27IPCAM
 
 endif
 
-if ARCH_MX3
+if ARCH_IMX_V6_V7
 
 comment "MX31 platforms:"
 
@@ -592,4 +604,20 @@ config MACH_VPR200
           Include support for VPR200 platform. This includes specific
           configurations for the board and its peripherals.
 
+comment "i.MX6 family:"
+
+config SOC_IMX6Q
+        bool "i.MX6 Quad support"
+        select ARM_GIC
+        select CACHE_L2X0
+        select CPU_V7
+        select HAVE_ARM_SCU
+        select HAVE_IMX_GPC
+        select HAVE_IMX_MMDC
+        select HAVE_IMX_SRC
+        select USE_OF
+
+        help
+          This enables support for Freescale i.MX6 Quad processor.
+
 endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 116d4b2d2817..aba73214c2a8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -60,3 +60,14 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_CPU_V7) += head-v7.o
+AFLAGS_head-v7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index dbe61201bcd8..22d85889f622 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
 zreladdr-$(CONFIG_ARCH_MX3)     += 0x80008000
 params_phys-$(CONFIG_ARCH_MX3)  := 0x80000100
 initrd_phys-$(CONFIG_ARCH_MX3)  := 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX6Q)    += 0x10008000
+params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
+initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
new file mode 100644
index 000000000000..e0b926dfeced
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -0,0 +1,2012 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/div64.h>
+#include <asm/mach/map.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define PLL_BASE                IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
+#define PLL1_SYS                (PLL_BASE + 0x000)
+#define PLL2_BUS                (PLL_BASE + 0x030)
+#define PLL3_USB_OTG            (PLL_BASE + 0x010)
+#define PLL4_AUDIO              (PLL_BASE + 0x070)
+#define PLL5_VIDEO              (PLL_BASE + 0x0a0)
+#define PLL6_MLB                (PLL_BASE + 0x0d0)
+#define PLL7_USB_HOST           (PLL_BASE + 0x020)
+#define PLL8_ENET               (PLL_BASE + 0x0e0)
+#define PFD_480                 (PLL_BASE + 0x0f0)
+#define PFD_528                 (PLL_BASE + 0x100)
+#define PLL_NUM_OFFSET          0x010
+#define PLL_DENOM_OFFSET        0x020
+
+#define PFD0                    7
+#define PFD1                    15
+#define PFD2                    23
+#define PFD3                    31
+#define PFD_FRAC_MASK           0x3f
+
+#define BM_PLL_BYPASS                   (0x1 << 16)
+#define BM_PLL_ENABLE                   (0x1 << 13)
+#define BM_PLL_POWER_DOWN               (0x1 << 12)
+#define BM_PLL_LOCK                     (0x1 << 31)
+#define BP_PLL_SYS_DIV_SELECT           0
+#define BM_PLL_SYS_DIV_SELECT           (0x7f << 0)
+#define BP_PLL_BUS_DIV_SELECT           0
+#define BM_PLL_BUS_DIV_SELECT           (0x1 << 0)
+#define BP_PLL_USB_DIV_SELECT           0
+#define BM_PLL_USB_DIV_SELECT           (0x3 << 0)
+#define BP_PLL_AV_DIV_SELECT            0
+#define BM_PLL_AV_DIV_SELECT            (0x7f << 0)
+#define BP_PLL_ENET_DIV_SELECT          0
+#define BM_PLL_ENET_DIV_SELECT          (0x3 << 0)
+#define BM_PLL_ENET_EN_PCIE             (0x1 << 19)
+#define BM_PLL_ENET_EN_SATA             (0x1 << 20)
+
+#define CCM_BASE        IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
+#define CCR             (CCM_BASE + 0x00)
+#define CCDR            (CCM_BASE + 0x04)
+#define CSR             (CCM_BASE + 0x08)
+#define CCSR            (CCM_BASE + 0x0c)
+#define CACRR           (CCM_BASE + 0x10)
+#define CBCDR           (CCM_BASE + 0x14)
+#define CBCMR           (CCM_BASE + 0x18)
+#define CSCMR1          (CCM_BASE + 0x1c)
+#define CSCMR2          (CCM_BASE + 0x20)
+#define CSCDR1          (CCM_BASE + 0x24)
+#define CS1CDR          (CCM_BASE + 0x28)
+#define CS2CDR          (CCM_BASE + 0x2c)
+#define CDCDR           (CCM_BASE + 0x30)
+#define CHSCCDR         (CCM_BASE + 0x34)
+#define CSCDR2          (CCM_BASE + 0x38)
+#define CSCDR3          (CCM_BASE + 0x3c)
+#define CSCDR4          (CCM_BASE + 0x40)
+#define CWDR            (CCM_BASE + 0x44)
+#define CDHIPR          (CCM_BASE + 0x48)
+#define CDCR            (CCM_BASE + 0x4c)
+#define CTOR            (CCM_BASE + 0x50)
+#define CLPCR           (CCM_BASE + 0x54)
+#define CISR            (CCM_BASE + 0x58)
+#define CIMR            (CCM_BASE + 0x5c)
+#define CCOSR           (CCM_BASE + 0x60)
+#define CGPR            (CCM_BASE + 0x64)
+#define CCGR0           (CCM_BASE + 0x68)
+#define CCGR1           (CCM_BASE + 0x6c)
+#define CCGR2           (CCM_BASE + 0x70)
+#define CCGR3           (CCM_BASE + 0x74)
+#define CCGR4           (CCM_BASE + 0x78)
+#define CCGR5           (CCM_BASE + 0x7c)
+#define CCGR6           (CCM_BASE + 0x80)
+#define CCGR7           (CCM_BASE + 0x84)
+#define CMEOR           (CCM_BASE + 0x88)
+
+#define CG0             0
+#define CG1             2
+#define CG2             4
+#define CG3             6
+#define CG4             8
+#define CG5             10
+#define CG6             12
+#define CG7             14
+#define CG8             16
+#define CG9             18
+#define CG10            20
+#define CG11            22
+#define CG12            24
+#define CG13            26
+#define CG14            28
+#define CG15            30
+
+#define BM_CCSR_PLL1_SW_SEL             (0x1 << 2)
+#define BM_CCSR_STEP_SEL                (0x1 << 8)
+
+#define BP_CACRR_ARM_PODF               0
+#define BM_CACRR_ARM_PODF               (0x7 << 0)
+
+#define BP_CBCDR_PERIPH2_CLK2_PODF      0
+#define BM_CBCDR_PERIPH2_CLK2_PODF      (0x7 << 0)
+#define BP_CBCDR_MMDC_CH1_AXI_PODF      3
+#define BM_CBCDR_MMDC_CH1_AXI_PODF      (0x7 << 3)
+#define BP_CBCDR_AXI_SEL                6
+#define BM_CBCDR_AXI_SEL                (0x3 << 6)
+#define BP_CBCDR_IPG_PODF               8
+#define BM_CBCDR_IPG_PODF               (0x3 << 8)
+#define BP_CBCDR_AHB_PODF               10
+#define BM_CBCDR_AHB_PODF               (0x7 << 10)
+#define BP_CBCDR_AXI_PODF               16
+#define BM_CBCDR_AXI_PODF               (0x7 << 16)
+#define BP_CBCDR_MMDC_CH0_AXI_PODF      19
+#define BM_CBCDR_MMDC_CH0_AXI_PODF      (0x7 << 19)
+#define BP_CBCDR_PERIPH_CLK_SEL         25
+#define BM_CBCDR_PERIPH_CLK_SEL         (0x1 << 25)
+#define BP_CBCDR_PERIPH2_CLK_SEL        26
+#define BM_CBCDR_PERIPH2_CLK_SEL        (0x1 << 26)
+#define BP_CBCDR_PERIPH_CLK2_PODF       27
+#define BM_CBCDR_PERIPH_CLK2_PODF       (0x7 << 27)
+
+#define BP_CBCMR_GPU2D_AXI_SEL          0
+#define BM_CBCMR_GPU2D_AXI_SEL          (0x1 << 0)
+#define BP_CBCMR_GPU3D_AXI_SEL          1
+#define BM_CBCMR_GPU3D_AXI_SEL          (0x1 << 1)
+#define BP_CBCMR_GPU3D_CORE_SEL         4
+#define BM_CBCMR_GPU3D_CORE_SEL         (0x3 << 4)
+#define BP_CBCMR_GPU3D_SHADER_SEL       8
+#define BM_CBCMR_GPU3D_SHADER_SEL       (0x3 << 8)
+#define BP_CBCMR_PCIE_AXI_SEL           10
+#define BM_CBCMR_PCIE_AXI_SEL           (0x1 << 10)
+#define BP_CBCMR_VDO_AXI_SEL            11
+#define BM_CBCMR_VDO_AXI_SEL            (0x1 << 11)
+#define BP_CBCMR_PERIPH_CLK2_SEL        12
+#define BM_CBCMR_PERIPH_CLK2_SEL        (0x3 << 12)
+#define BP_CBCMR_VPU_AXI_SEL            14
+#define BM_CBCMR_VPU_AXI_SEL            (0x3 << 14)
+#define BP_CBCMR_GPU2D_CORE_SEL         16
+#define BM_CBCMR_GPU2D_CORE_SEL         (0x3 << 16)
+#define BP_CBCMR_PRE_PERIPH_CLK_SEL     18
+#define BM_CBCMR_PRE_PERIPH_CLK_SEL     (0x3 << 18)
+#define BP_CBCMR_PERIPH2_CLK2_SEL       20
+#define BM_CBCMR_PERIPH2_CLK2_SEL       (0x1 << 20)
+#define BP_CBCMR_PRE_PERIPH2_CLK_SEL    21
+#define BM_CBCMR_PRE_PERIPH2_CLK_SEL    (0x3 << 21)
+#define BP_CBCMR_GPU2D_CORE_PODF        23
+#define BM_CBCMR_GPU2D_CORE_PODF        (0x7 << 23)
+#define BP_CBCMR_GPU3D_CORE_PODF        26
+#define BM_CBCMR_GPU3D_CORE_PODF        (0x7 << 26)
+#define BP_CBCMR_GPU3D_SHADER_PODF      29
+#define BM_CBCMR_GPU3D_SHADER_PODF      (0x7 << 29)
+
+#define BP_CSCMR1_PERCLK_PODF           0
+#define BM_CSCMR1_PERCLK_PODF           (0x3f << 0)
+#define BP_CSCMR1_SSI1_SEL              10
+#define BM_CSCMR1_SSI1_SEL              (0x3 << 10)
+#define BP_CSCMR1_SSI2_SEL              12
+#define BM_CSCMR1_SSI2_SEL              (0x3 << 12)
+#define BP_CSCMR1_SSI3_SEL              14
+#define BM_CSCMR1_SSI3_SEL              (0x3 << 14)
+#define BP_CSCMR1_USDHC1_SEL            16
+#define BM_CSCMR1_USDHC1_SEL            (0x1 << 16)
+#define BP_CSCMR1_USDHC2_SEL            17
+#define BM_CSCMR1_USDHC2_SEL            (0x1 << 17)
+#define BP_CSCMR1_USDHC3_SEL            18
+#define BM_CSCMR1_USDHC3_SEL            (0x1 << 18)
+#define BP_CSCMR1_USDHC4_SEL            19
+#define BM_CSCMR1_USDHC4_SEL            (0x1 << 19)
+#define BP_CSCMR1_EMI_PODF              20
+#define BM_CSCMR1_EMI_PODF              (0x7 << 20)
+#define BP_CSCMR1_EMI_SLOW_PODF         23
+#define BM_CSCMR1_EMI_SLOW_PODF         (0x7 << 23)
+#define BP_CSCMR1_EMI_SEL               27
+#define BM_CSCMR1_EMI_SEL               (0x3 << 27)
+#define BP_CSCMR1_EMI_SLOW_SEL          29
+#define BM_CSCMR1_EMI_SLOW_SEL          (0x3 << 29)
+
+#define BP_CSCMR2_CAN_PODF              2
+#define BM_CSCMR2_CAN_PODF              (0x3f << 2)
+#define BM_CSCMR2_LDB_DI0_IPU_DIV       (0x1 << 10)
+#define BM_CSCMR2_LDB_DI1_IPU_DIV       (0x1 << 11)
+#define BP_CSCMR2_ESAI_SEL              19
+#define BM_CSCMR2_ESAI_SEL              (0x3 << 19)
+
+#define BP_CSCDR1_UART_PODF             0
+#define BM_CSCDR1_UART_PODF             (0x3f << 0)
+#define BP_CSCDR1_USDHC1_PODF           11
+#define BM_CSCDR1_USDHC1_PODF           (0x7 << 11)
+#define BP_CSCDR1_USDHC2_PODF           16
+#define BM_CSCDR1_USDHC2_PODF           (0x7 << 16)
+#define BP_CSCDR1_USDHC3_PODF           19
+#define BM_CSCDR1_USDHC3_PODF           (0x7 << 19)
+#define BP_CSCDR1_USDHC4_PODF           22
+#define BM_CSCDR1_USDHC4_PODF           (0x7 << 22)
+#define BP_CSCDR1_VPU_AXI_PODF          25
+#define BM_CSCDR1_VPU_AXI_PODF          (0x7 << 25)
+
+#define BP_CS1CDR_SSI1_PODF             0
+#define BM_CS1CDR_SSI1_PODF             (0x3f << 0)
+#define BP_CS1CDR_SSI1_PRED             6
+#define BM_CS1CDR_SSI1_PRED             (0x7 << 6)
+#define BP_CS1CDR_ESAI_PRED             9
+#define BM_CS1CDR_ESAI_PRED             (0x7 << 9)
+#define BP_CS1CDR_SSI3_PODF             16
+#define BM_CS1CDR_SSI3_PODF             (0x3f << 16)
+#define BP_CS1CDR_SSI3_PRED             22
+#define BM_CS1CDR_SSI3_PRED             (0x7 << 22)
+#define BP_CS1CDR_ESAI_PODF             25
+#define BM_CS1CDR_ESAI_PODF             (0x7 << 25)
+
+#define BP_CS2CDR_SSI2_PODF             0
+#define BM_CS2CDR_SSI2_PODF             (0x3f << 0)
+#define BP_CS2CDR_SSI2_PRED             6
+#define BM_CS2CDR_SSI2_PRED             (0x7 << 6)
+#define BP_CS2CDR_LDB_DI0_SEL           9
+#define BM_CS2CDR_LDB_DI0_SEL           (0x7 << 9)
+#define BP_CS2CDR_LDB_DI1_SEL           12
+#define BM_CS2CDR_LDB_DI1_SEL           (0x7 << 12)
+#define BP_CS2CDR_ENFC_SEL              16
+#define BM_CS2CDR_ENFC_SEL              (0x3 << 16)
+#define BP_CS2CDR_ENFC_PRED             18
+#define BM_CS2CDR_ENFC_PRED             (0x7 << 18)
+#define BP_CS2CDR_ENFC_PODF             21
+#define BM_CS2CDR_ENFC_PODF             (0x3f << 21)
+
+#define BP_CDCDR_ASRC_SERIAL_SEL        7
+#define BM_CDCDR_ASRC_SERIAL_SEL        (0x3 << 7)
+#define BP_CDCDR_ASRC_SERIAL_PODF       9
+#define BM_CDCDR_ASRC_SERIAL_PODF       (0x7 << 9)
+#define BP_CDCDR_ASRC_SERIAL_PRED       12
+#define BM_CDCDR_ASRC_SERIAL_PRED       (0x7 << 12)
+#define BP_CDCDR_SPDIF_SEL              20
+#define BM_CDCDR_SPDIF_SEL              (0x3 << 20)
+#define BP_CDCDR_SPDIF_PODF             22
+#define BM_CDCDR_SPDIF_PODF             (0x7 << 22)
+#define BP_CDCDR_SPDIF_PRED             25
+#define BM_CDCDR_SPDIF_PRED             (0x7 << 25)
+#define BP_CDCDR_HSI_TX_PODF            29
+#define BM_CDCDR_HSI_TX_PODF            (0x7 << 29)
+#define BP_CDCDR_HSI_TX_SEL             28
+#define BM_CDCDR_HSI_TX_SEL             (0x1 << 28)
+
+#define BP_CHSCCDR_IPU1_DI0_SEL         0
+#define BM_CHSCCDR_IPU1_DI0_SEL         (0x7 << 0)
+#define BP_CHSCCDR_IPU1_DI0_PRE_PODF    3
+#define BM_CHSCCDR_IPU1_DI0_PRE_PODF    (0x7 << 3)
+#define BP_CHSCCDR_IPU1_DI0_PRE_SEL     6
+#define BM_CHSCCDR_IPU1_DI0_PRE_SEL     (0x7 << 6)
+#define BP_CHSCCDR_IPU1_DI1_SEL         9
+#define BM_CHSCCDR_IPU1_DI1_SEL         (0x7 << 9)
+#define BP_CHSCCDR_IPU1_DI1_PRE_PODF    12
+#define BM_CHSCCDR_IPU1_DI1_PRE_PODF    (0x7 << 12)
+#define BP_CHSCCDR_IPU1_DI1_PRE_SEL     15
+#define BM_CHSCCDR_IPU1_DI1_PRE_SEL     (0x7 << 15)
+
+#define BP_CSCDR2_IPU2_DI0_SEL          0
+#define BM_CSCDR2_IPU2_DI0_SEL          (0x7)
+#define BP_CSCDR2_IPU2_DI0_PRE_PODF     3
+#define BM_CSCDR2_IPU2_DI0_PRE_PODF     (0x7 << 3)
+#define BP_CSCDR2_IPU2_DI0_PRE_SEL      6
+#define BM_CSCDR2_IPU2_DI0_PRE_SEL      (0x7 << 6)
+#define BP_CSCDR2_IPU2_DI1_SEL          9
+#define BM_CSCDR2_IPU2_DI1_SEL          (0x7 << 9)
+#define BP_CSCDR2_IPU2_DI1_PRE_PODF     12
+#define BM_CSCDR2_IPU2_DI1_PRE_PODF     (0x7 << 12)
+#define BP_CSCDR2_IPU2_DI1_PRE_SEL      15
+#define BM_CSCDR2_IPU2_DI1_PRE_SEL      (0x7 << 15)
+#define BP_CSCDR2_ECSPI_CLK_PODF        19
+#define BM_CSCDR2_ECSPI_CLK_PODF        (0x3f << 19)
+
+#define BP_CSCDR3_IPU1_HSP_SEL          9
+#define BM_CSCDR3_IPU1_HSP_SEL          (0x3 << 9)
+#define BP_CSCDR3_IPU1_HSP_PODF         11
+#define BM_CSCDR3_IPU1_HSP_PODF         (0x7 << 11)
+#define BP_CSCDR3_IPU2_HSP_SEL          14
+#define BM_CSCDR3_IPU2_HSP_SEL          (0x3 << 14)
+#define BP_CSCDR3_IPU2_HSP_PODF         16
+#define BM_CSCDR3_IPU2_HSP_PODF         (0x7 << 16)
+
+#define BM_CDHIPR_AXI_PODF_BUSY         (0x1 << 0)
+#define BM_CDHIPR_AHB_PODF_BUSY         (0x1 << 1)
+#define BM_CDHIPR_MMDC_CH1_PODF_BUSY    (0x1 << 2)
+#define BM_CDHIPR_PERIPH2_SEL_BUSY      (0x1 << 3)
+#define BM_CDHIPR_MMDC_CH0_PODF_BUSY    (0x1 << 4)
+#define BM_CDHIPR_PERIPH_SEL_BUSY       (0x1 << 5)
+#define BM_CDHIPR_ARM_PODF_BUSY         (0x1 << 16)
+
+#define BP_CLPCR_LPM                    0
+#define BM_CLPCR_LPM                    (0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY      (0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM     (0x1 << 5)
+#define BM_CLPCR_SBYOS                  (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC            (0x1 << 7)
+#define BM_CLPCR_VSTBY                  (0x1 << 8)
+#define BP_CLPCR_STBY_COUNT             9
+#define BM_CLPCR_STBY_COUNT             (0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN           (0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM          (0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM         (0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS    (0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS    (0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI         (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI         (0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI         (0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI         (0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE          (0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE         (0x1 << 27)
+
+#define FREQ_480M       480000000
+#define FREQ_528M       528000000
+#define FREQ_594M       594000000
+#define FREQ_650M       650000000
+#define FREQ_1300M      1300000000
+
+static struct clk pll1_sys;
+static struct clk pll2_bus;
+static struct clk pll3_usb_otg;
+static struct clk pll4_audio;
+static struct clk pll5_video;
+static struct clk pll6_mlb;
+static struct clk pll7_usb_host;
+static struct clk pll8_enet;
+static struct clk apbh_dma_clk;
+static struct clk arm_clk;
+static struct clk ipg_clk;
+static struct clk ahb_clk;
+static struct clk axi_clk;
+static struct clk mmdc_ch0_axi_clk;
+static struct clk mmdc_ch1_axi_clk;
+static struct clk periph_clk;
+static struct clk periph_pre_clk;
+static struct clk periph_clk2_clk;
+static struct clk periph2_clk;
+static struct clk periph2_pre_clk;
+static struct clk periph2_clk2_clk;
+static struct clk gpu2d_core_clk;
+static struct clk gpu3d_core_clk;
+static struct clk gpu3d_shader_clk;
+static struct clk ipg_perclk;
+static struct clk emi_clk;
+static struct clk emi_slow_clk;
+static struct clk can1_clk;
+static struct clk uart_clk;
+static struct clk usdhc1_clk;
+static struct clk usdhc2_clk;
+static struct clk usdhc3_clk;
+static struct clk usdhc4_clk;
+static struct clk vpu_clk;
+static struct clk hsi_tx_clk;
+static struct clk ipu1_di0_pre_clk;
+static struct clk ipu1_di1_pre_clk;
+static struct clk ipu2_di0_pre_clk;
+static struct clk ipu2_di1_pre_clk;
+static struct clk ipu1_clk;
+static struct clk ipu2_clk;
+static struct clk ssi1_clk;
+static struct clk ssi3_clk;
+static struct clk esai_clk;
+static struct clk ssi2_clk;
+static struct clk spdif_clk;
+static struct clk asrc_serial_clk;
+static struct clk gpu2d_axi_clk;
+static struct clk gpu3d_axi_clk;
+static struct clk pcie_clk;
+static struct clk vdo_axi_clk;
+static struct clk ldb_di0_clk;
+static struct clk ldb_di1_clk;
+static struct clk ipu1_di0_clk;
+static struct clk ipu1_di1_clk;
+static struct clk ipu2_di0_clk;
+static struct clk ipu2_di1_clk;
+static struct clk enfc_clk;
+static struct clk dummy_clk = {};
+
+static unsigned long external_high_reference;
+static unsigned long external_low_reference;
+static unsigned long oscillator_reference;
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+        return oscillator_reference;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+        return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+        return external_low_reference;
+}
+
+static struct clk ckil_clk = {
+        .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk ckih_clk = {
+        .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+        .get_rate = get_oscillator_reference_clock_rate,
+};
+
+static inline void __iomem *pll_get_reg_addr(struct clk *pll)
+{
+        if (pll == &pll1_sys)
+                return PLL1_SYS;
+        else if (pll == &pll2_bus)
+                return PLL2_BUS;
+        else if (pll == &pll3_usb_otg)
+                return PLL3_USB_OTG;
+        else if (pll == &pll4_audio)
+                return PLL4_AUDIO;
+        else if (pll == &pll5_video)
+                return PLL5_VIDEO;
+        else if (pll == &pll6_mlb)
+                return PLL6_MLB;
+        else if (pll == &pll7_usb_host)
+                return PLL7_USB_HOST;
+        else if (pll == &pll8_enet)
+                return PLL8_ENET;
+        else
+                BUG();
+
+        return NULL;
+}
+
+static int pll_enable(struct clk *clk)
+{
+        int timeout = 0x100000;
+        void __iomem *reg;
+        u32 val;
+
+        reg = pll_get_reg_addr(clk);
+        val = readl_relaxed(reg);
+        val &= ~BM_PLL_BYPASS;
+        val &= ~BM_PLL_POWER_DOWN;
+        /* 480MHz PLLs have the opposite definition for power bit */
+        if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+                val |= BM_PLL_POWER_DOWN;
+        writel_relaxed(val, reg);
+
+        /* Wait for PLL to lock */
+        while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
+                cpu_relax();
+
+        if (unlikely(!timeout))
+                return -EBUSY;
+
+        /* Enable the PLL output now */
+        val = readl_relaxed(reg);
+        val |= BM_PLL_ENABLE;
+        writel_relaxed(val, reg);
+
+        return 0;
+}
+
+static void pll_disable(struct clk *clk)
+{
+        void __iomem *reg;
+        u32 val;
+
+        reg = pll_get_reg_addr(clk);
+        val = readl_relaxed(reg);
+        val &= ~BM_PLL_ENABLE;
+        val |= BM_PLL_BYPASS;
+        val |= BM_PLL_POWER_DOWN;
+        if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+                val &= ~BM_PLL_POWER_DOWN;
+        writel_relaxed(val, reg);
+}
+
+static unsigned long pll1_sys_get_rate(struct clk *clk)
+{
+        u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
+                  BP_PLL_SYS_DIV_SELECT;
+
+        return clk_get_rate(clk->parent) * div / 2;
+}
+
+static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 val, div;
+
+        if (rate < FREQ_650M || rate > FREQ_1300M)
+                return -EINVAL;
+
+        div = rate * 2 / clk_get_rate(clk->parent);
+        val = readl_relaxed(PLL1_SYS);
+        val &= ~BM_PLL_SYS_DIV_SELECT;
+        val |= div << BP_PLL_SYS_DIV_SELECT;
+        writel_relaxed(val, PLL1_SYS);
+
+        return 0;
+}
+
+static unsigned long pll8_enet_get_rate(struct clk *clk)
+{
+        u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
+                  BP_PLL_ENET_DIV_SELECT;
+
+        switch (div) {
+        case 0:
+                return 25000000;
+        case 1:
+                return 50000000;
+        case 2:
+                return 100000000;
+        case 3:
+                return 125000000;
+        }
+
+        return 0;
+}
+
+static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 val, div;
+
+        switch (rate) {
+        case 25000000:
+                div = 0;
+                break;
+        case 50000000:
+                div = 1;
+                break;
+        case 100000000:
+                div = 2;
+                break;
+        case 125000000:
+                div = 3;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        val = readl_relaxed(PLL8_ENET);
+        val &= ~BM_PLL_ENET_DIV_SELECT;
+        val |= div << BP_PLL_ENET_DIV_SELECT;
+        writel_relaxed(val, PLL8_ENET);
+
+        return 0;
+}
+
+static unsigned long pll_av_get_rate(struct clk *clk)
+{
+        void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
+        u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
+        u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
+                  BP_PLL_AV_DIV_SELECT;
+
+        return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static int pll_av_set_rate(struct clk *clk, unsigned long rate)
+{
+        void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+        unsigned int parent_rate = clk_get_rate(clk->parent);
+        u32 val, div;
+        u32 mfn, mfd = 1000000;
+        s64 temp64;
+
+        if (rate < FREQ_650M || rate > FREQ_1300M)
+                return -EINVAL;
+
+        div = rate / parent_rate;
+        temp64 = (u64) (rate - div * parent_rate);
+        temp64 *= mfd;
+        do_div(temp64, parent_rate);
+        mfn = temp64;
+
+        val = readl_relaxed(reg);
+        val &= ~BM_PLL_AV_DIV_SELECT;
+        val |= div << BP_PLL_AV_DIV_SELECT;
+        writel_relaxed(val, reg);
+        writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
+        writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
+
+        return 0;
+}
+
+static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
+{
+        void __iomem *reg;
+
+        if (clk == &pll2_bus) {
+                reg = PLL2_BUS;
+                *bp = BP_PLL_BUS_DIV_SELECT;
+                *bm = BM_PLL_BUS_DIV_SELECT;
+        } else if (clk == &pll3_usb_otg) {
+                reg = PLL3_USB_OTG;
+                *bp = BP_PLL_USB_DIV_SELECT;
+                *bm = BM_PLL_USB_DIV_SELECT;
+        } else if (clk == &pll7_usb_host) {
+                reg = PLL7_USB_HOST;
+                *bp = BP_PLL_USB_DIV_SELECT;
+                *bm = BM_PLL_USB_DIV_SELECT;
+        } else {
+                BUG();
+        }
+
+        return reg;
+}
+
+static unsigned long pll_get_rate(struct clk *clk)
+{
+        void __iomem *reg;
+        u32 div, bp, bm;
+
+        reg = pll_get_div_reg_bit(clk, &bp, &bm);
+        div = (readl_relaxed(reg) & bm) >> bp;
+
+        return (div == 1) ? clk_get_rate(clk->parent) * 22 :
+                            clk_get_rate(clk->parent) * 20;
+}
+
+static int pll_set_rate(struct clk *clk, unsigned long rate)
+{
+        void __iomem *reg;
+        u32 val, div, bp, bm;
+
+        if (rate == FREQ_528M)
+                div = 1;
+        else if (rate == FREQ_480M)
+                div = 0;
+        else
+                return -EINVAL;
+
+        reg = pll_get_div_reg_bit(clk, &bp, &bm);
+        val = readl_relaxed(reg);
+        val &= ~bm;
+        val |= div << bp;
+        writel_relaxed(val, reg);
+
+        return 0;
+}
+
+#define pll2_bus_get_rate       pll_get_rate
+#define pll2_bus_set_rate       pll_set_rate
+#define pll3_usb_otg_get_rate   pll_get_rate
+#define pll3_usb_otg_set_rate   pll_set_rate
+#define pll7_usb_host_get_rate  pll_get_rate
+#define pll7_usb_host_set_rate  pll_set_rate
+#define pll4_audio_get_rate     pll_av_get_rate
+#define pll4_audio_set_rate     pll_av_set_rate
+#define pll5_video_get_rate     pll_av_get_rate
+#define pll5_video_set_rate     pll_av_set_rate
+#define pll6_mlb_get_rate       NULL
+#define pll6_mlb_set_rate       NULL
+
+#define DEF_PLL(name)                                   \
+        static struct clk name = {                      \
+                .enable         = pll_enable,           \
+                .disable        = pll_disable,          \
+                .get_rate       = name##_get_rate,      \
+                .set_rate       = name##_set_rate,      \
+                .parent         = &osc_clk,             \
+        }
+
+DEF_PLL(pll1_sys);
+DEF_PLL(pll2_bus);
+DEF_PLL(pll3_usb_otg);
+DEF_PLL(pll4_audio);
+DEF_PLL(pll5_video);
+DEF_PLL(pll6_mlb);
+DEF_PLL(pll7_usb_host);
+DEF_PLL(pll8_enet);
+
+static unsigned long pfd_get_rate(struct clk *clk)
+{
+        u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+        u32 frac, bp_frac;
+
+        if (apbh_dma_clk.usecount == 0)
+                apbh_dma_clk.enable(&apbh_dma_clk);
+
+        bp_frac = clk->enable_shift - 7;
+        frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
+        do_div(tmp, frac);
+
+        return tmp;
+}
+
+static int pfd_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 val, frac, bp_frac;
+        u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+
+        if (apbh_dma_clk.usecount == 0)
+                apbh_dma_clk.enable(&apbh_dma_clk);
+
+        /*
+         * Round up the divider so that we don't set a rate
+         * higher than what is requested
+         */
+        tmp += rate / 2;
+        do_div(tmp, rate);
+        frac = tmp;
+        frac = (frac < 12) ? 12 : frac;
+        frac = (frac > 35) ? 35 : frac;
+
+        /*
+         * The frac field always starts from 7 bits lower
+         * position of enable bit
+         */
+        bp_frac = clk->enable_shift - 7;
+        val = readl_relaxed(clk->enable_reg);
+        val &= ~(PFD_FRAC_MASK << bp_frac);
+        val |= frac << bp_frac;
+        writel_relaxed(val, clk->enable_reg);
+
+        tmp = (u64) clk_get_rate(clk->parent) * 18;
+        do_div(tmp, frac);
+
+        if (apbh_dma_clk.usecount == 0)
+                apbh_dma_clk.disable(&apbh_dma_clk);
+
+        return 0;
+}
+
+static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
+{
+        u32 frac;
+        u64 tmp;
+
+        tmp = (u64) clk_get_rate(clk->parent) * 18;
+        tmp += rate / 2;
+        do_div(tmp, rate);
+        frac = tmp;
+        frac = (frac < 12) ? 12 : frac;
+        frac = (frac > 35) ? 35 : frac;
+        tmp = (u64) clk_get_rate(clk->parent) * 18;
+        do_div(tmp, frac);
+
+        return tmp;
+}
+
+static int pfd_enable(struct clk *clk)
+{
+        u32 val;
+
+        if (apbh_dma_clk.usecount == 0)
+                apbh_dma_clk.enable(&apbh_dma_clk);
+
+        val = readl_relaxed(clk->enable_reg);
+        val &= ~(1 << clk->enable_shift);
+        writel_relaxed(val, clk->enable_reg);
+
+        if (apbh_dma_clk.usecount == 0)
+                apbh_dma_clk.disable(&apbh_dma_clk);
+
+        return 0;
+}
+
+static void pfd_disable(struct clk *clk)
+{
+        u32 val;
+
+        if (apbh_dma_clk.usecount == 0)
+                apbh_dma_clk.enable(&apbh_dma_clk);
+
+        val = readl_relaxed(clk->enable_reg);
+        val |= 1 << clk->enable_shift;
+        writel_relaxed(val, clk->enable_reg);
+
+        if (apbh_dma_clk.usecount == 0)
+                apbh_dma_clk.disable(&apbh_dma_clk);
+}
+
+#define DEF_PFD(name, er, es, p)                        \
+        static struct clk name = {                      \
+                .enable_reg     = er,                   \
+                .enable_shift   = es,                   \
+                .enable         = pfd_enable,           \
+                .disable        = pfd_disable,          \
+                .get_rate       = pfd_get_rate,         \
+                .set_rate       = pfd_set_rate,         \
+                .round_rate     = pfd_round_rate,       \
+                .parent         = p,                    \
+        }
+
+DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
+DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
+DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
+DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
+
+static unsigned long pll2_200m_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk pll2_200m = {
+        .parent = &pll2_pfd_400m,
+        .get_rate = pll2_200m_get_rate,
+};
+
+static unsigned long pll3_120m_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) / 4;
+}
+
+static struct clk pll3_120m = {
+        .parent = &pll3_usb_otg,
+        .get_rate = pll3_120m_get_rate,
+};
+
+static unsigned long pll3_80m_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) / 6;
+}
+
+static struct clk pll3_80m = {
+        .parent = &pll3_usb_otg,
+        .get_rate = pll3_80m_get_rate,
+};
+
+static unsigned long pll3_60m_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) / 8;
+}
+
+static struct clk pll3_60m = {
+        .parent = &pll3_usb_otg,
+        .get_rate = pll3_60m_get_rate,
+};
+
+static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 val = readl_relaxed(CCSR);
+
+        if (parent == &pll1_sys) {
+                val &= ~BM_CCSR_PLL1_SW_SEL;
+                val &= ~BM_CCSR_STEP_SEL;
+        } else if (parent == &osc_clk) {
+                val |= BM_CCSR_PLL1_SW_SEL;
+                val &= ~BM_CCSR_STEP_SEL;
+        } else if (parent == &pll2_pfd_400m) {
+                val |= BM_CCSR_PLL1_SW_SEL;
+                val |= BM_CCSR_STEP_SEL;
+        } else {
+                return -EINVAL;
+        }
+
+        writel_relaxed(val, CCSR);
+
+        return 0;
+}
+
+static struct clk pll1_sw_clk = {
+        .parent = &pll1_sys,
+        .set_parent = pll1_sw_clk_set_parent,
+};
+
+static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
+{
+        u32 min_pred, temp_pred, old_err, err;
+
+        if (div >= 512) {
+                *pred = 8;
+                *podf = 64;
+        } else if (div >= 8) {
+                min_pred = (div - 1) / 64 + 1;
+                old_err = 8;
+                for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
+                        err = div % temp_pred;
+                        if (err == 0) {
+                                *pred = temp_pred;
+                                break;
+                        }
+                        err = temp_pred - err;
+                        if (err < old_err) {
+                                old_err = err;
+                                *pred = temp_pred;
+                        }
+                }
+                *podf = (div + *pred - 1) / *pred;
+        } else if (div < 8) {
+                *pred = div;
+                *podf = 1;
+        }
+}
+
+static int _clk_enable(struct clk *clk)
+{
+        u32 reg;
+        reg = readl_relaxed(clk->enable_reg);
+        reg |= 0x3 << clk->enable_shift;
+        writel_relaxed(reg, clk->enable_reg);
+
+        return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+        u32 reg;
+        reg = readl_relaxed(clk->enable_reg);
+        reg &= ~(0x3 << clk->enable_shift);
+        writel_relaxed(reg, clk->enable_reg);
+}
+
+struct divider {
+        struct clk *clk;
+        void __iomem *reg;
+        u32 bp_pred;
+        u32 bm_pred;
+        u32 bp_podf;
+        u32 bm_podf;
+};
+
+#define DEF_CLK_DIV1(d, c, r, b)                                \
+        static struct divider d = {                             \
+                .clk = c,                                       \
+                .reg = r,                                       \
+                .bp_podf = BP_##r##_##b##_PODF,                 \
+                .bm_podf = BM_##r##_##b##_PODF,                 \
+        }
+
+DEF_CLK_DIV1(arm_div,           &arm_clk,               CACRR,  ARM);
+DEF_CLK_DIV1(ipg_div,           &ipg_clk,               CBCDR,  IPG);
+DEF_CLK_DIV1(ahb_div,           &ahb_clk,               CBCDR,  AHB);
+DEF_CLK_DIV1(axi_div,           &axi_clk,               CBCDR,  AXI);
+DEF_CLK_DIV1(mmdc_ch0_axi_div,  &mmdc_ch0_axi_clk,      CBCDR,  MMDC_CH0_AXI);
+DEF_CLK_DIV1(mmdc_ch1_axi_div,  &mmdc_ch1_axi_clk,      CBCDR,  MMDC_CH1_AXI);
+DEF_CLK_DIV1(periph_clk2_div,   &periph_clk2_clk,       CBCDR,  PERIPH_CLK2);
+DEF_CLK_DIV1(periph2_clk2_div,  &periph2_clk2_clk,      CBCDR,  PERIPH2_CLK2);
+DEF_CLK_DIV1(gpu2d_core_div,    &gpu2d_core_clk,        CBCMR,  GPU2D_CORE);
+DEF_CLK_DIV1(gpu3d_core_div,    &gpu3d_core_clk,        CBCMR,  GPU3D_CORE);
+DEF_CLK_DIV1(gpu3d_shader_div,  &gpu3d_shader_clk,      CBCMR,  GPU3D_SHADER);
+DEF_CLK_DIV1(ipg_perclk_div,    &ipg_perclk,            CSCMR1, PERCLK);
+DEF_CLK_DIV1(emi_div,           &emi_clk,               CSCMR1, EMI);
+DEF_CLK_DIV1(emi_slow_div,      &emi_slow_clk,          CSCMR1, EMI_SLOW);
+DEF_CLK_DIV1(can_div,           &can1_clk,              CSCMR2, CAN);
+DEF_CLK_DIV1(uart_div,          &uart_clk,              CSCDR1, UART);
+DEF_CLK_DIV1(usdhc1_div,        &usdhc1_clk,            CSCDR1, USDHC1);
+DEF_CLK_DIV1(usdhc2_div,        &usdhc2_clk,            CSCDR1, USDHC2);
+DEF_CLK_DIV1(usdhc3_div,        &usdhc3_clk,            CSCDR1, USDHC3);
+DEF_CLK_DIV1(usdhc4_div,        &usdhc4_clk,            CSCDR1, USDHC4);
+DEF_CLK_DIV1(vpu_div,           &vpu_clk,               CSCDR1, VPU_AXI);
+DEF_CLK_DIV1(hsi_tx_div,        &hsi_tx_clk,            CDCDR,  HSI_TX);
+DEF_CLK_DIV1(ipu1_di0_pre_div,  &ipu1_di0_pre_clk,      CHSCCDR, IPU1_DI0_PRE);
+DEF_CLK_DIV1(ipu1_di1_pre_div,  &ipu1_di1_pre_clk,      CHSCCDR, IPU1_DI1_PRE);
+DEF_CLK_DIV1(ipu2_di0_pre_div,  &ipu2_di0_pre_clk,      CSCDR2, IPU2_DI0_PRE);
+DEF_CLK_DIV1(ipu2_di1_pre_div,  &ipu2_di1_pre_clk,      CSCDR2, IPU2_DI1_PRE);
+DEF_CLK_DIV1(ipu1_div,          &ipu1_clk,              CSCDR3, IPU1_HSP);
+DEF_CLK_DIV1(ipu2_div,          &ipu2_clk,              CSCDR3, IPU2_HSP);
+
+#define DEF_CLK_DIV2(d, c, r, b)                                \
+        static struct divider d = {                             \
+                .clk = c,                                       \
+                .reg = r,                                       \
+                .bp_pred = BP_##r##_##b##_PRED,                 \
+                .bm_pred = BM_##r##_##b##_PRED,                 \
+                .bp_podf = BP_##r##_##b##_PODF,                 \
+                .bm_podf = BM_##r##_##b##_PODF,                 \
+        }
+
+DEF_CLK_DIV2(ssi1_div,          &ssi1_clk,              CS1CDR, SSI1);
+DEF_CLK_DIV2(ssi3_div,          &ssi3_clk,              CS1CDR, SSI3);
+DEF_CLK_DIV2(esai_div,          &esai_clk,              CS1CDR, ESAI);
+DEF_CLK_DIV2(ssi2_div,          &ssi2_clk,              CS2CDR, SSI2);
+DEF_CLK_DIV2(enfc_div,          &enfc_clk,              CS2CDR, ENFC);
+DEF_CLK_DIV2(spdif_div,         &spdif_clk,             CDCDR,  SPDIF);
+DEF_CLK_DIV2(asrc_serial_div,   &asrc_serial_clk,       CDCDR,  ASRC_SERIAL);
+
+static struct divider *dividers[] = {
+        &arm_div,
+        &ipg_div,
+        &ahb_div,
+        &axi_div,
+        &mmdc_ch0_axi_div,
+        &mmdc_ch1_axi_div,
+        &periph_clk2_div,
+        &periph2_clk2_div,
+        &gpu2d_core_div,
+        &gpu3d_core_div,
+        &gpu3d_shader_div,
+        &ipg_perclk_div,
+        &emi_div,
+        &emi_slow_div,
+        &can_div,
+        &uart_div,
+        &usdhc1_div,
+        &usdhc2_div,
+        &usdhc3_div,
+        &usdhc4_div,
+        &vpu_div,
+        &hsi_tx_div,
+        &ipu1_di0_pre_div,
+        &ipu1_di1_pre_div,
+        &ipu2_di0_pre_div,
+        &ipu2_di1_pre_div,
+        &ipu1_div,
+        &ipu2_div,
+        &ssi1_div,
+        &ssi3_div,
+        &esai_div,
+        &ssi2_div,
+        &enfc_div,
+        &spdif_div,
+        &asrc_serial_div,
+};
+
+static unsigned long ldb_di_clk_get_rate(struct clk *clk)
+{
+        u32 val = readl_relaxed(CSCMR2);
+
+        val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
+                                       BM_CSCMR2_LDB_DI1_IPU_DIV;
+        if (val)
+                return clk_get_rate(clk->parent) / 7;
+        else
+                return clk_get_rate(clk->parent) * 2 / 7;
+}
+
+static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        u32 val = readl_relaxed(CSCMR2);
+
+        if (rate * 7 <= parent_rate + parent_rate / 20)
+                val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
+        else
+                val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
+
+        writel_relaxed(val, CSCMR2);
+
+        return 0;
+}
+
+static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+
+        if (rate * 7 <= parent_rate + parent_rate / 20)
+                return parent_rate / 7;
+        else
+                return 2 * parent_rate / 7;
+}
+
+static unsigned long _clk_get_rate(struct clk *clk)
+{
+        struct divider *d;
+        u32 val, pred, podf;
+        int i, num;
+
+        if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+                return ldb_di_clk_get_rate(clk);
+
+        num = ARRAY_SIZE(dividers);
+        for (i = 0; i < num; i++)
+                if (dividers[i]->clk == clk) {
+                        d = dividers[i];
+                        break;
+                }
+        if (i == num)
+                return clk_get_rate(clk->parent);
+
+        val = readl_relaxed(d->reg);
+        pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
+        podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
+
+        return clk_get_rate(clk->parent) / (pred * podf);
+}
+
+static int clk_busy_wait(struct clk *clk)
+{
+        int timeout = 0x100000;
+        u32 bm;
+
+        if (clk == &axi_clk)
+                bm = BM_CDHIPR_AXI_PODF_BUSY;
+        else if (clk == &ahb_clk)
+                bm = BM_CDHIPR_AHB_PODF_BUSY;
+        else if (clk == &mmdc_ch0_axi_clk)
+                bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
+        else if (clk == &periph_clk)
+                bm = BM_CDHIPR_PERIPH_SEL_BUSY;
+        else if (clk == &arm_clk)
+                bm = BM_CDHIPR_ARM_PODF_BUSY;
+        else
+                return -EINVAL;
+
+        while ((readl_relaxed(CDHIPR) & bm) && --timeout)
+                cpu_relax();
+
+        if (unlikely(!timeout))
+                return -EBUSY;
+
+        return 0;
+}
+
+static int _clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        struct divider *d;
+        u32 val, div, max_div, pred = 0, podf;
+        int i, num;
+
+        if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+                return ldb_di_clk_set_rate(clk, rate);
+
+        num = ARRAY_SIZE(dividers);
+        for (i = 0; i < num; i++)
+                if (dividers[i]->clk == clk) {
+                        d = dividers[i];
+                        break;
+                }
+        if (i == num)
+                return -EINVAL;
+
+        max_div = ((d->bm_pred >> d->bp_pred) + 1) *
+                  ((d->bm_pred >> d->bp_pred) + 1);
+
+        div = parent_rate / rate;
+        if (div == 0)
+                div++;
+
+        if ((parent_rate / div != rate) || div > max_div)
+                return -EINVAL;
+
+        if (d->bm_pred) {
+                calc_pred_podf_dividers(div, &pred, &podf);
+        } else {
+                pred = 1;
+                podf = div;
+        }
+
+        val = readl_relaxed(d->reg);
+        val &= ~(d->bm_pred | d->bm_podf);
+        val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
+        writel_relaxed(val, d->reg);
+
+        if (clk == &axi_clk || clk == &ahb_clk ||
+            clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
+                return clk_busy_wait(clk);
+
+        return 0;
+}
+
+static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        u32 div = parent_rate / rate;
+        u32 div_max, pred = 0, podf;
+        struct divider *d;
+        int i, num;
+
+        if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+                return ldb_di_clk_round_rate(clk, rate);
+
+        num = ARRAY_SIZE(dividers);
+        for (i = 0; i < num; i++)
+                if (dividers[i]->clk == clk) {
+                        d = dividers[i];
+                        break;
+                }
+        if (i == num)
+                return -EINVAL;
+
+        if (div == 0 || parent_rate % rate)
+                div++;
+
+        if (d->bm_pred) {
+                calc_pred_podf_dividers(div, &pred, &podf);
+                div = pred * podf;
+        } else {
+                div_max = (d->bm_podf >> d->bp_podf) + 1;
+                if (div > div_max)
+                        div = div_max;
+        }
+
+        return parent_rate / div;
+}
+
+struct multiplexer {
+        struct clk *clk;
+        void __iomem *reg;
+        u32 bp;
+        u32 bm;
+        int pnum;
+        struct clk *parents[];
+};
+
+static struct multiplexer axi_mux = {
+        .clk = &axi_clk,
+        .reg = CBCDR,
+        .bp = BP_CBCDR_AXI_SEL,
+        .bm = BM_CBCDR_AXI_SEL,
+        .parents = {
+                &periph_clk,
+                &pll2_pfd_400m,
+                &pll3_pfd_540m,
+                NULL
+        },
+};
+
+static struct multiplexer periph_mux = {
+        .clk = &periph_clk,
+        .reg = CBCDR,
+        .bp = BP_CBCDR_PERIPH_CLK_SEL,
+        .bm = BM_CBCDR_PERIPH_CLK_SEL,
+        .parents = {
+                &periph_pre_clk,
+                &periph_clk2_clk,
+                NULL
+        },
+};
+
+static struct multiplexer periph_pre_mux = {
+        .clk = &periph_pre_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
+        .bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
+        .parents = {
+                &pll2_bus,
+                &pll2_pfd_400m,
+                &pll2_pfd_352m,
+                &pll2_200m,
+                NULL
+        },
+};
+
+static struct multiplexer periph_clk2_mux = {
+        .clk = &periph_clk2_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_PERIPH_CLK2_SEL,
+        .bm = BM_CBCMR_PERIPH_CLK2_SEL,
+        .parents = {
+                &pll3_usb_otg,
+                &osc_clk,
+                NULL
+        },
+};
+
+static struct multiplexer periph2_mux = {
+        .clk = &periph2_clk,
+        .reg = CBCDR,
+        .bp = BP_CBCDR_PERIPH2_CLK_SEL,
+        .bm = BM_CBCDR_PERIPH2_CLK_SEL,
+        .parents = {
+                &periph2_pre_clk,
+                &periph2_clk2_clk,
+                NULL
+        },
+};
+
+static struct multiplexer periph2_pre_mux = {
+        .clk = &periph2_pre_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
+        .bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
+        .parents = {
+                &pll2_bus,
+                &pll2_pfd_400m,
+                &pll2_pfd_352m,
+                &pll2_200m,
+                NULL
+        },
+};
+
+static struct multiplexer periph2_clk2_mux = {
+        .clk = &periph2_clk2_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_PERIPH2_CLK2_SEL,
+        .bm = BM_CBCMR_PERIPH2_CLK2_SEL,
+        .parents = {
+                &pll3_usb_otg,
+                &osc_clk,
+                NULL
+        },
+};
+
+static struct multiplexer gpu2d_axi_mux = {
+        .clk = &gpu2d_axi_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_GPU2D_AXI_SEL,
+        .bm = BM_CBCMR_GPU2D_AXI_SEL,
+        .parents = {
+                &axi_clk,
+                &ahb_clk,
+                NULL
+        },
+};
+
+static struct multiplexer gpu3d_axi_mux = {
+        .clk = &gpu3d_axi_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_GPU3D_AXI_SEL,
+        .bm = BM_CBCMR_GPU3D_AXI_SEL,
+        .parents = {
+                &axi_clk,
+                &ahb_clk,
+                NULL
+        },
+};
+
+static struct multiplexer gpu3d_core_mux = {
+        .clk = &gpu3d_core_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_GPU3D_CORE_SEL,
+        .bm = BM_CBCMR_GPU3D_CORE_SEL,
+        .parents = {
+                &mmdc_ch0_axi_clk,
+                &pll3_usb_otg,
+                &pll2_pfd_594m,
+                &pll2_pfd_400m,
+                NULL
+        },
+};
+
+static struct multiplexer gpu3d_shader_mux = {
+        .clk = &gpu3d_shader_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_GPU3D_SHADER_SEL,
+        .bm = BM_CBCMR_GPU3D_SHADER_SEL,
+        .parents = {
+                &mmdc_ch0_axi_clk,
+                &pll3_usb_otg,
+                &pll2_pfd_594m,
+                &pll3_pfd_720m,
+                NULL
+        },
+};
+
+static struct multiplexer pcie_axi_mux = {
+        .clk = &pcie_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_PCIE_AXI_SEL,
+        .bm = BM_CBCMR_PCIE_AXI_SEL,
+        .parents = {
+                &axi_clk,
+                &ahb_clk,
+                NULL
+        },
+};
+
+static struct multiplexer vdo_axi_mux = {
+        .clk = &vdo_axi_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_VDO_AXI_SEL,
+        .bm = BM_CBCMR_VDO_AXI_SEL,
+        .parents = {
+                &axi_clk,
+                &ahb_clk,
+                NULL
+        },
+};
+
+static struct multiplexer vpu_axi_mux = {
+        .clk = &vpu_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_VPU_AXI_SEL,
+        .bm = BM_CBCMR_VPU_AXI_SEL,
+        .parents = {
+                &axi_clk,
+                &pll2_pfd_400m,
+                &pll2_pfd_352m,
+                NULL
+        },
+};
+
+static struct multiplexer gpu2d_core_mux = {
+        .clk = &gpu2d_core_clk,
+        .reg = CBCMR,
+        .bp = BP_CBCMR_GPU2D_CORE_SEL,
+        .bm = BM_CBCMR_GPU2D_CORE_SEL,
+        .parents = {
+                &axi_clk,
+                &pll3_usb_otg,
+                &pll2_pfd_352m,
+                &pll2_pfd_400m,
+                NULL
+        },
+};
+
+#define DEF_SSI_MUX(id)                                                 \
+        static struct multiplexer ssi##id##_mux = {                     \
+                .clk = &ssi##id##_clk,                                  \
+                .reg = CSCMR1,                                          \
+                .bp = BP_CSCMR1_SSI##id##_SEL,                          \
+                .bm = BM_CSCMR1_SSI##id##_SEL,                          \
+                .parents = {                                            \
+                        &pll3_pfd_508m,                                 \
+                        &pll3_pfd_454m,                                 \
+                        &pll4_audio,                                    \
+                        NULL                                            \
+                },                                                      \
+        }
+
+DEF_SSI_MUX(1);
+DEF_SSI_MUX(2);
+DEF_SSI_MUX(3);
+
+#define DEF_USDHC_MUX(id)                                               \
+        static struct multiplexer usdhc##id##_mux = {                   \
+                .clk = &usdhc##id##_clk,                                \
+                .reg = CSCMR1,                                          \
+                .bp = BP_CSCMR1_USDHC##id##_SEL,                        \
+                .bm = BM_CSCMR1_USDHC##id##_SEL,                        \
+                .parents = {                                            \
+                        &pll2_pfd_400m,                                 \
+                        &pll2_pfd_352m,                                 \
+                        NULL                                            \
+                },                                                      \
+        }
+
+DEF_USDHC_MUX(1);
+DEF_USDHC_MUX(2);
+DEF_USDHC_MUX(3);
+DEF_USDHC_MUX(4);
+
+static struct multiplexer emi_mux = {
+        .clk = &emi_clk,
+        .reg = CSCMR1,
+        .bp = BP_CSCMR1_EMI_SEL,
+        .bm = BM_CSCMR1_EMI_SEL,
+        .parents = {
+                &axi_clk,
+                &pll3_usb_otg,
+                &pll2_pfd_400m,
+                &pll2_pfd_352m,
+                NULL
+        },
+};
+
+static struct multiplexer emi_slow_mux = {
+        .clk = &emi_slow_clk,
+        .reg = CSCMR1,
+        .bp = BP_CSCMR1_EMI_SLOW_SEL,
+        .bm = BM_CSCMR1_EMI_SLOW_SEL,
+        .parents = {
+                &axi_clk,
+                &pll3_usb_otg,
+                &pll2_pfd_400m,
+                &pll2_pfd_352m,
+                NULL
+        },
+};
+
+static struct multiplexer esai_mux = {
+        .clk = &esai_clk,
+        .reg = CSCMR2,
+        .bp = BP_CSCMR2_ESAI_SEL,
+        .bm = BM_CSCMR2_ESAI_SEL,
+        .parents = {
+                &pll4_audio,
+                &pll3_pfd_508m,
+                &pll3_pfd_454m,
+                &pll3_usb_otg,
+                NULL
+        },
+};
+
+#define DEF_LDB_DI_MUX(id)                                              \
+        static struct multiplexer ldb_di##id##_mux = {                  \
+                .clk = &ldb_di##id##_clk,                               \
+                .reg = CS2CDR,                                          \
+                .bp = BP_CS2CDR_LDB_DI##id##_SEL,                       \
+                .bm = BM_CS2CDR_LDB_DI##id##_SEL,                       \
+                .parents = {                                            \
+                        &pll5_video,                                    \
+                        &pll2_pfd_352m,                                 \
+                        &pll2_pfd_400m,                                 \
+                        &pll3_pfd_540m,                                 \
+                        &pll3_usb_otg,                                  \
+                        NULL                                            \
+                },                                                      \
+        }
+
+DEF_LDB_DI_MUX(0);
+DEF_LDB_DI_MUX(1);
+
+static struct multiplexer enfc_mux = {
+        .clk = &enfc_clk,
+        .reg = CS2CDR,
+        .bp = BP_CS2CDR_ENFC_SEL,
+        .bm = BM_CS2CDR_ENFC_SEL,
+        .parents = {
+                &pll2_pfd_352m,
+                &pll2_bus,
+                &pll3_usb_otg,
+                &pll2_pfd_400m,
+                NULL
+        },
+};
+
+static struct multiplexer spdif_mux = {
+        .clk = &spdif_clk,
+        .reg = CDCDR,
+        .bp = BP_CDCDR_SPDIF_SEL,
+        .bm = BM_CDCDR_SPDIF_SEL,
+        .parents = {
+                &pll4_audio,
+                &pll3_pfd_508m,
+                &pll3_pfd_454m,
+                &pll3_usb_otg,
+                NULL
+        },
+};
+
+static struct multiplexer asrc_serial_mux = {
+        .clk = &asrc_serial_clk,
+        .reg = CDCDR,
+        .bp = BP_CDCDR_ASRC_SERIAL_SEL,
+        .bm = BM_CDCDR_ASRC_SERIAL_SEL,
+        .parents = {
+                &pll4_audio,
+                &pll3_pfd_508m,
+                &pll3_pfd_454m,
+                &pll3_usb_otg,
+                NULL
+        },
+};
+
+static struct multiplexer hsi_tx_mux = {
+        .clk = &hsi_tx_clk,
+        .reg = CDCDR,
+        .bp = BP_CDCDR_HSI_TX_SEL,
+        .bm = BM_CDCDR_HSI_TX_SEL,
+        .parents = {
+                &pll3_120m,
+                &pll2_pfd_400m,
+                NULL
+        },
+};
+
+#define DEF_IPU_DI_PRE_MUX(r, i, d)                                     \
+        static struct multiplexer ipu##i##_di##d##_pre_mux = {          \
+                .clk = &ipu##i##_di##d##_pre_clk,                       \
+                .reg = r,                                               \
+                .bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL,                \
+                .bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL,                \
+                .parents = {                                            \
+                        &mmdc_ch0_axi_clk,                              \
+                        &pll3_usb_otg,                                  \
+                        &pll5_video,                                    \
+                        &pll2_pfd_352m,                                 \
+                        &pll2_pfd_400m,                                 \
+                        &pll3_pfd_540m,                                 \
+                        NULL                                            \
+                },                                                      \
+        }
+
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_DI_MUX(r, i, d)                                         \
+        static struct multiplexer ipu##i##_di##d##_mux = {              \
+                .clk = &ipu##i##_di##d##_clk,                           \
+                .reg = r,                                               \
+                .bp = BP_##r##_IPU##i##_DI##d##_SEL,                    \
+                .bm = BM_##r##_IPU##i##_DI##d##_SEL,                    \
+                .parents = {                                            \
+                        &ipu##i##_di##d##_pre_clk,                      \
+                        &dummy_clk,                                     \
+                        &dummy_clk,                                     \
+                        &ldb_di0_clk,                                   \
+                        &ldb_di1_clk,                                   \
+                        NULL                                            \
+                },                                                      \
+        }
+
+DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_MUX(id)                                                 \
+        static struct multiplexer ipu##id##_mux = {                     \
+                .clk = &ipu##id##_clk,                                  \
+                .reg = CSCDR3,                                          \
+                .bp = BP_CSCDR3_IPU##id##_HSP_SEL,                      \
+                .bm = BM_CSCDR3_IPU##id##_HSP_SEL,                      \
+                .parents = {                                            \
+                        &mmdc_ch0_axi_clk,                              \
+                        &pll2_pfd_400m,                                 \
+                        &pll3_120m,                                     \
+                        &pll3_pfd_540m,                                 \
+                        NULL                                            \
+                },                                                      \
+        }
+
+DEF_IPU_MUX(1);
+DEF_IPU_MUX(2);
+
+static struct multiplexer *multiplexers[] = {
+        &axi_mux,
+        &periph_mux,
+        &periph_pre_mux,
+        &periph_clk2_mux,
+        &periph2_mux,
+        &periph2_pre_mux,
+        &periph2_clk2_mux,
+        &gpu2d_axi_mux,
+        &gpu3d_axi_mux,
+        &gpu3d_core_mux,
+        &gpu3d_shader_mux,
+        &pcie_axi_mux,
+        &vdo_axi_mux,
+        &vpu_axi_mux,
+        &gpu2d_core_mux,
+        &ssi1_mux,
+        &ssi2_mux,
+        &ssi3_mux,
+        &usdhc1_mux,
+        &usdhc2_mux,
+        &usdhc3_mux,
+        &usdhc4_mux,
+        &emi_mux,
+        &emi_slow_mux,
+        &esai_mux,
+        &ldb_di0_mux,
+        &ldb_di1_mux,
+        &enfc_mux,
+        &spdif_mux,
+        &asrc_serial_mux,
+        &hsi_tx_mux,
+        &ipu1_di0_pre_mux,
+        &ipu1_di0_mux,
+        &ipu1_di1_pre_mux,
+        &ipu1_di1_mux,
+        &ipu2_di0_pre_mux,
+        &ipu2_di0_mux,
+        &ipu2_di1_pre_mux,
+        &ipu2_di1_mux,
+        &ipu1_mux,
+        &ipu2_mux,
+};
+
+static int _clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        struct multiplexer *m;
+        int i, num;
+        u32 val;
+
+        num = ARRAY_SIZE(multiplexers);
+        for (i = 0; i < num; i++)
+                if (multiplexers[i]->clk == clk) {
+                        m = multiplexers[i];
+                        break;
+                }
+        if (i == num)
+                return -EINVAL;
+
+        i = 0;
+        while (m->parents[i]) {
+                if (parent == m->parents[i])
+                        break;
+                i++;
+        }
+        if (!m->parents[i])
+                return -EINVAL;
+
+        val = readl_relaxed(m->reg);
+        val &= ~m->bm;
+        val |= i << m->bp;
+        writel_relaxed(val, m->reg);
+
+        if (clk == &periph_clk)
+                return clk_busy_wait(clk);
+
+        return 0;
+}
+
+#define DEF_NG_CLK(name, p)                             \
+        static struct clk name = {                      \
+                .get_rate       = _clk_get_rate,        \
+                .set_rate       = _clk_set_rate,        \
+                .round_rate     = _clk_round_rate,      \
+                .set_parent     = _clk_set_parent,      \
+                .parent         = p,                    \
+        }
+
+DEF_NG_CLK(periph_clk2_clk,     &osc_clk);
+DEF_NG_CLK(periph_pre_clk,      &pll2_bus);
+DEF_NG_CLK(periph_clk,          &periph_pre_clk);
+DEF_NG_CLK(periph2_clk2_clk,    &osc_clk);
+DEF_NG_CLK(periph2_pre_clk,     &pll2_bus);
+DEF_NG_CLK(periph2_clk,         &periph2_pre_clk);
+DEF_NG_CLK(axi_clk,             &periph_clk);
+DEF_NG_CLK(emi_clk,             &axi_clk);
+DEF_NG_CLK(arm_clk,             &pll1_sw_clk);
+DEF_NG_CLK(ahb_clk,             &periph_clk);
+DEF_NG_CLK(ipg_clk,             &ahb_clk);
+DEF_NG_CLK(ipg_perclk,          &ipg_clk);
+DEF_NG_CLK(ipu1_di0_pre_clk,    &pll3_pfd_540m);
+DEF_NG_CLK(ipu1_di1_pre_clk,    &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di0_pre_clk,    &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di1_pre_clk,    &pll3_pfd_540m);
+DEF_NG_CLK(asrc_serial_clk,     &pll3_usb_otg);
+
+#define DEF_CLK(name, er, es, p, s)                     \
+        static struct clk name = {                      \
+                .enable_reg     = er,                   \
+                .enable_shift   = es,                   \
+                .enable         = _clk_enable,          \
+                .disable        = _clk_disable,         \
+                .get_rate       = _clk_get_rate,        \
+                .set_rate       = _clk_set_rate,        \
+                .round_rate     = _clk_round_rate,      \
+                .set_parent     = _clk_set_parent,      \
+                .parent         = p,                    \
+                .secondary      = s,                    \
+        }
+
+DEF_CLK(aips_tz1_clk,     CCGR0, CG0,  &ahb_clk,          NULL);
+DEF_CLK(aips_tz2_clk,     CCGR0, CG1,  &ahb_clk,          NULL);
+DEF_CLK(apbh_dma_clk,     CCGR0, CG2,  &ahb_clk,          NULL);
+DEF_CLK(asrc_clk,         CCGR0, CG3,  &pll4_audio,       NULL);
+DEF_CLK(can1_serial_clk,  CCGR0, CG8,  &pll3_usb_otg,     NULL);
+DEF_CLK(can1_clk,         CCGR0, CG7,  &pll3_usb_otg,     &can1_serial_clk);
+DEF_CLK(can2_serial_clk,  CCGR0, CG10, &pll3_usb_otg,     NULL);
+DEF_CLK(can2_clk,         CCGR0, CG9,  &pll3_usb_otg,     &can2_serial_clk);
+DEF_CLK(ecspi1_clk,       CCGR1, CG0,  &pll3_60m,         NULL);
+DEF_CLK(ecspi2_clk,       CCGR1, CG1,  &pll3_60m,         NULL);
+DEF_CLK(ecspi3_clk,       CCGR1, CG2,  &pll3_60m,         NULL);
+DEF_CLK(ecspi4_clk,       CCGR1, CG3,  &pll3_60m,         NULL);
+DEF_CLK(ecspi5_clk,       CCGR1, CG4,  &pll3_60m,         NULL);
+DEF_CLK(enet_clk,         CCGR1, CG5,  &ipg_clk,          NULL);
+DEF_CLK(esai_clk,         CCGR1, CG8,  &pll3_usb_otg,     NULL);
+DEF_CLK(gpt_serial_clk,   CCGR1, CG11, &ipg_perclk,       NULL);
+DEF_CLK(gpt_clk,          CCGR1, CG10, &ipg_perclk,       &gpt_serial_clk);
+DEF_CLK(gpu2d_core_clk,   CCGR1, CG12, &pll2_pfd_352m,    &gpu2d_axi_clk);
+DEF_CLK(gpu3d_core_clk,   CCGR1, CG13, &pll2_pfd_594m,    &gpu3d_axi_clk);
+DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m,    &gpu3d_axi_clk);
+DEF_CLK(hdmi_iahb_clk,    CCGR2, CG0,  &ahb_clk,          NULL);
+DEF_CLK(hdmi_isfr_clk,    CCGR2, CG2,  &pll3_pfd_540m,    &hdmi_iahb_clk);
+DEF_CLK(i2c1_clk,         CCGR2, CG3,  &ipg_perclk,       NULL);
+DEF_CLK(i2c2_clk,         CCGR2, CG4,  &ipg_perclk,       NULL);
+DEF_CLK(i2c3_clk,         CCGR2, CG5,  &ipg_perclk,       NULL);
+DEF_CLK(iim_clk,          CCGR2, CG6,  &ipg_clk,          NULL);
+DEF_CLK(enfc_clk,         CCGR2, CG7,  &pll2_pfd_352m,    NULL);
+DEF_CLK(ipu1_clk,         CCGR3, CG0,  &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu1_di0_clk,     CCGR3, CG1,  &ipu1_di0_pre_clk, NULL);
+DEF_CLK(ipu1_di1_clk,     CCGR3, CG2,  &ipu1_di1_pre_clk, NULL);
+DEF_CLK(ipu2_clk,         CCGR3, CG3,  &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu2_di0_clk,     CCGR3, CG4,  &ipu2_di0_pre_clk, NULL);
+DEF_CLK(ipu2_di1_clk,     CCGR3, CG5,  &ipu2_di1_pre_clk, NULL);
+DEF_CLK(ldb_di0_clk,      CCGR3, CG6,  &pll3_pfd_540m,    NULL);
+DEF_CLK(ldb_di1_clk,      CCGR3, CG7,  &pll3_pfd_540m,    NULL);
+DEF_CLK(hsi_tx_clk,       CCGR3, CG8,  &pll2_pfd_400m,    NULL);
+DEF_CLK(mlb_clk,          CCGR3, CG9,  &pll6_mlb,         NULL);
+DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk,          NULL);
+DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk,       &mmdc_ch0_ipg_clk);
+DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk,          NULL);
+DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk,      &mmdc_ch1_ipg_clk);
+DEF_CLK(openvg_axi_clk,   CCGR3, CG13, &axi_clk,          NULL);
+DEF_CLK(pwm1_clk,         CCGR4, CG8,  &ipg_perclk,       NULL);
+DEF_CLK(pwm2_clk,         CCGR4, CG9,  &ipg_perclk,       NULL);
+DEF_CLK(pwm3_clk,         CCGR4, CG10, &ipg_perclk,       NULL);
+DEF_CLK(pwm4_clk,         CCGR4, CG11, &ipg_perclk,       NULL);
+DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk,       NULL);
+DEF_CLK(gpmi_bch_clk,     CCGR4, CG13, &usdhc4_clk,       &gpmi_bch_apb_clk);
+DEF_CLK(gpmi_apb_clk,     CCGR4, CG15, &usdhc3_clk,       &gpmi_bch_clk);
+DEF_CLK(gpmi_io_clk,      CCGR4, CG14, &enfc_clk,         &gpmi_apb_clk);
+DEF_CLK(sdma_clk,         CCGR5, CG3,  &ahb_clk,          NULL);
+DEF_CLK(spba_clk,         CCGR5, CG6,  &ipg_clk,          NULL);
+DEF_CLK(spdif_clk,        CCGR5, CG7,  &pll3_usb_otg,     &spba_clk);
+DEF_CLK(ssi1_clk,         CCGR5, CG9,  &pll3_pfd_508m,    NULL);
+DEF_CLK(ssi2_clk,         CCGR5, CG10, &pll3_pfd_508m,    NULL);
+DEF_CLK(ssi3_clk,         CCGR5, CG11, &pll3_pfd_508m,    NULL);
+DEF_CLK(uart_serial_clk,  CCGR5, CG13, &pll3_usb_otg,     NULL);
+DEF_CLK(uart_clk,         CCGR5, CG12, &pll3_80m,         &uart_serial_clk);
+DEF_CLK(usboh3_clk,       CCGR6, CG0,  &ipg_clk,          NULL);
+DEF_CLK(usdhc1_clk,       CCGR6, CG1,  &pll2_pfd_400m,    NULL);
+DEF_CLK(usdhc2_clk,       CCGR6, CG2,  &pll2_pfd_400m,    NULL);
+DEF_CLK(usdhc3_clk,       CCGR6, CG3,  &pll2_pfd_400m,    NULL);
+DEF_CLK(usdhc4_clk,       CCGR6, CG4,  &pll2_pfd_400m,    NULL);
+DEF_CLK(emi_slow_clk,     CCGR6, CG5,  &axi_clk,          NULL);
+DEF_CLK(vdo_axi_clk,      CCGR6, CG6,  &axi_clk,          NULL);
+DEF_CLK(vpu_clk,          CCGR6, CG7,  &axi_clk,          NULL);
+
+static int pcie_clk_enable(struct clk *clk)
+{
+        u32 val;
+
+        val = readl_relaxed(PLL8_ENET);
+        val |= BM_PLL_ENET_EN_PCIE;
+        writel_relaxed(val, PLL8_ENET);
+
+        return _clk_enable(clk);
+}
+
+static void pcie_clk_disable(struct clk *clk)
+{
+        u32 val;
+
+        _clk_disable(clk);
+
+        val = readl_relaxed(PLL8_ENET);
+        val &= BM_PLL_ENET_EN_PCIE;
+        writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk pcie_clk = {
+        .enable_reg = CCGR4,
+        .enable_shift = CG0,
+        .enable = pcie_clk_enable,
+        .disable = pcie_clk_disable,
+        .set_parent = _clk_set_parent,
+        .parent = &axi_clk,
+        .secondary = &pll8_enet,
+};
+
+static int sata_clk_enable(struct clk *clk)
+{
+        u32 val;
+
+        val = readl_relaxed(PLL8_ENET);
+        val |= BM_PLL_ENET_EN_SATA;
+        writel_relaxed(val, PLL8_ENET);
+
+        return _clk_enable(clk);
+}
+
+static void sata_clk_disable(struct clk *clk)
+{
+        u32 val;
+
+        _clk_disable(clk);
+
+        val = readl_relaxed(PLL8_ENET);
+        val &= BM_PLL_ENET_EN_SATA;
+        writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk sata_clk = {
+        .enable_reg = CCGR5,
+        .enable_shift = CG2,
+        .enable = sata_clk_enable,
+        .disable = sata_clk_disable,
+        .parent = &ipg_clk,
+        .secondary = &pll8_enet,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+        { \
+                .dev_id = d, \
+                .con_id = n, \
+                .clk = &c, \
+        }
+
+static struct clk_lookup lookups[] = {
+        _REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
+        _REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
+        _REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
+        _REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
+        _REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
+        _REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
+        _REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
+        _REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
+        _REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
+        _REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
+        _REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
+        _REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
+        _REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
+        _REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
+        _REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
+        _REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
+        _REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
+        _REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
+        _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
+        _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
+        _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+        _REGISTER_CLOCK(NULL, "ckih", ckih_clk),
+        _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
+        _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
+        _REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
+        _REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
+        _REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
+        _REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
+        _REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
+        _REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
+        _REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
+        _REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
+        _REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
+        _REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
+        _REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
+        _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
+        _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
+        _REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+};
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+        u32 val = readl_relaxed(CLPCR);
+
+        val &= ~BM_CLPCR_LPM;
+        switch (mode) {
+        case WAIT_CLOCKED:
+                break;
+        case WAIT_UNCLOCKED:
+                val |= 0x1 << BP_CLPCR_LPM;
+                break;
+        case STOP_POWER_ON:
+                val |= 0x2 << BP_CLPCR_LPM;
+                break;
+        case WAIT_UNCLOCKED_POWER_OFF:
+                val |= 0x1 << BP_CLPCR_LPM;
+                val &= ~BM_CLPCR_VSTBY;
+                val &= ~BM_CLPCR_SBYOS;
+                val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+                break;
+        case STOP_POWER_OFF:
+                val |= 0x2 << BP_CLPCR_LPM;
+                val |= 0x3 << BP_CLPCR_STBY_COUNT;
+                val |= BM_CLPCR_VSTBY;
+                val |= BM_CLPCR_SBYOS;
+                val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+                break;
+        default:
+                return -EINVAL;
+        }
+        writel_relaxed(val, CLPCR);
+
+        return 0;
+}
+
+static struct map_desc imx6q_clock_desc[] = {
+        imx_map_entry(MX6Q, CCM, MT_DEVICE),
+        imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
+};
+
+int __init mx6q_clocks_init(void)
+{
+        struct device_node *np;
+        void __iomem *base;
+        int i, irq;
+
+        iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+
+        /* retrieve the freqency of fixed clocks from device tree */
+        for_each_compatible_node(np, NULL, "fixed-clock") {
+                u32 rate;
+                if (of_property_read_u32(np, "clock-frequency", &rate))
+                        continue;
+
+                if (of_device_is_compatible(np, "fsl,imx-ckil"))
+                        external_low_reference = rate;
+                else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+                        external_high_reference = rate;
+                else if (of_device_is_compatible(np, "fsl,imx-osc"))
+                        oscillator_reference = rate;
+        }
+
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
+
+        /* only keep necessary clocks on */
+        writel_relaxed(0x3 << CG0  | 0x3 << CG1  | 0x3 << CG2,  CCGR0);
+        writel_relaxed(0x3 << CG8  | 0x3 << CG9  | 0x3 << CG10, CCGR2);
+        writel_relaxed(0x3 << CG10 | 0x3 << CG12,               CCGR3);
+        writel_relaxed(0x3 << CG4  | 0x3 << CG6  | 0x3 << CG7,  CCGR4);
+        writel_relaxed(0x3 << CG0,                              CCGR5);
+        writel_relaxed(0,                                       CCGR6);
+        writel_relaxed(0,                                       CCGR7);
+
+        clk_enable(&uart_clk);
+        clk_enable(&mmdc_ch0_axi_clk);
+
+        clk_set_rate(&pll4_audio, FREQ_650M);
+        clk_set_rate(&pll5_video, FREQ_650M);
+        clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
+        clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
+        clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
+        clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
+        clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
+        clk_set_rate(&gpu3d_core_clk, FREQ_528M);
+        clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
+        clk_set_rate(&asrc_serial_clk, 1500000);
+        clk_set_rate(&enfc_clk, 11000000);
+
+        np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+        base = of_iomap(np, 0);
+        WARN_ON(!base);
+        irq = irq_of_parse_and_map(np, 0);
+        mxc_timer_init(&gpt_clk, base, irq);
+
+        return 0;
+}
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
new file mode 100644
index 000000000000..e1537f9e45b8
--- /dev/null
+++ b/arch/arm/mach-imx/gpc.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1                0x008
+#define GPC_PGC_CPU_PDN         0x2a0
+
+#define IMR_NUM                 4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+        void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+        int i;
+
+        /* Tell GPC to power off ARM core when suspend */
+        writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+        for (i = 0; i < IMR_NUM; i++) {
+                gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+                writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+        }
+}
+
+void imx_gpc_post_resume(void)
+{
+        void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+        int i;
+
+        /* Keep ARM core powered on for other low-power modes */
+        writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+        for (i = 0; i < IMR_NUM; i++)
+                writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+        unsigned int idx = d->irq / 32 - 1;
+        u32 mask;
+
+        /* Sanity check for SPI irq */
+        if (d->irq < 32)
+                return -EINVAL;
+
+        mask = 1 << d->irq % 32;
+        gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+                                  gpc_wake_irqs[idx] & ~mask;
+
+        return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+        void __iomem *reg;
+        u32 val;
+
+        /* Sanity check for SPI irq */
+        if (d->irq < 32)
+                return;
+
+        reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+        val = readl_relaxed(reg);
+        val &= ~(1 << d->irq % 32);
+        writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+        void __iomem *reg;
+        u32 val;
+
+        /* Sanity check for SPI irq */
+        if (d->irq < 32)
+                return;
+
+        reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+        val = readl_relaxed(reg);
+        val |= 1 << (d->irq % 32);
+        writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+        struct device_node *np;
+
+        np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+        gpc_base = of_iomap(np, 0);
+        WARN_ON(!gpc_base);
+
+        /* Register GPC as the secondary interrupt controller behind GIC */
+        gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+        gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+        gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
new file mode 100644
index 000000000000..6229efbc70cb
--- /dev/null
+++ b/arch/arm/mach-imx/head-v7.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+        .section ".text.head", "ax"
+        __CPUINIT
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+        mov     r0, #0
+        mcr     p15, 2, r0, c0, c0, 0
+        mrc     p15, 1, r0, c0, c0, 0
+
+        ldr     r1, =0x7fff
+        and     r2, r1, r0, lsr #13
+
+        ldr     r1, =0x3ff
+
+        and     r3, r1, r0, lsr #3      @ NumWays - 1
+        add     r2, r2, #1              @ NumSets
+
+        and     r0, r0, #0x7
+        add     r0, r0, #4      @ SetShift
+
+        clz     r1, r3          @ WayShift
+        add     r4, r3, #1      @ NumWays
+1:      sub     r2, r2, #1      @ NumSets--
+        mov     r3, r4          @ Temp = NumWays
+2:      subs    r3, r3, #1      @ Temp--
+        mov     r5, r3, lsl r1
+        mov     r6, r2, lsl r0
+        orr     r5, r5, r6      @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+        mcr     p15, 0, r5, c7, c6, 2
+        bgt     2b
+        cmp     r2, #0
+        bgt     1b
+        dsb
+        isb
+        mov     pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+        bl      v7_invalidate_l1
+        b       secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+/*
+ * The following code is located into the .data section.  This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+        .data
+        .align
+
+        .macro  pl310_resume
+        ldr     r2, phys_l2x0_saved_regs
+        ldr     r0, [r2, #L2X0_R_PHY_BASE]      @ get physical base of l2x0
+        ldr     r1, [r2, #L2X0_R_AUX_CTRL]      @ get aux_ctrl value
+        str     r1, [r0, #L2X0_AUX_CTRL]        @ restore aux_ctrl
+        mov     r1, #0x1
+        str     r1, [r0, #L2X0_CTRL]            @ re-enable L2
+        .endm
+
+ENTRY(v7_cpu_resume)
+        bl      v7_invalidate_l1
+        pl310_resume
+        b       cpu_resume
+ENDPROC(v7_cpu_resume)
+
+        .globl  phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+        .long   0
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
new file mode 100644
index 000000000000..89493abd497c
--- /dev/null
+++ b/arch/arm/mach-imx/hotplug.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <asm/cacheflush.h>
+#include <mach/common.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+        return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+        flush_cache_all();
+        imx_enable_cpu(cpu, false);
+        cpu_do_idle();
+
+        /* We should never return from idle */
+        panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+        /*
+         * we don't allow CPU 0 to be shutdown (it is still too special
+         * e.g. clock tick interrupts)
+         */
+        return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
new file mode 100644
index 000000000000..d4ab6f29a766
--- /dev/null
+++ b/arch/arm/mach-imx/lluart.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+        .virtual        = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
+        .pfn            = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
+        .length         = MX6Q_UART4_SIZE,
+        .type           = MT_DEVICE,
+#endif
+};
+
+void __init imx_lluart_map_io(void)
+{
+        if (imx_lluart_desc.virtual)
+                iotable_init(&imx_lluart_desc, 1);
+}
diff --git a/arch/arm/mach-imx/localtimer.c b/arch/arm/mach-imx/localtimer.c
new file mode 100644
index 000000000000..3a163515d41f
--- /dev/null
+++ b/arch/arm/mach-imx/localtimer.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+        struct device_node *np;
+
+        np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+        if (!twd_base) {
+                twd_base = of_iomap(np, 0);
+                WARN_ON(!twd_base);
+        }
+        evt->irq = irq_of_parse_and_map(np, 0);
+        twd_timer_setup(evt);
+
+        return 0;
+}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
new file mode 100644
index 000000000000..8bf5fa349484
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+        imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+        imx_lluart_map_io();
+        imx_scu_map_io();
+}
+
+static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+                                struct device_node *interrupt_parent)
+{
+        static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+                                   32 * 7; /* imx6q gets 7 gpio ports */
+
+        irq_domain_add_simple(np, gpio_irq_base);
+        gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+        { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
+        { /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+        l2x0_of_init(0, ~0UL);
+        imx_src_init();
+        imx_gpc_init();
+        of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+        mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+        .init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+        "fsl,imx6q-sabreauto",
+        NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+        .map_io         = imx6q_map_io,
+        .init_irq       = imx6q_init_irq,
+        .handle_irq     = imx6q_handle_irq,
+        .timer          = &imx6q_timer,
+        .init_machine   = imx6q_init_machine,
+        .dt_compat      = imx6q_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
new file mode 100644
index 000000000000..c461e98496c3
--- /dev/null
+++ b/arch/arm/mach-imx/mmdc.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#define MMDC_MAPSR              0x404
+#define BP_MMDC_MAPSR_PSD       0
+#define BP_MMDC_MAPSR_PSS       4
+
+static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+{
+        struct device_node *np = pdev->dev.of_node;
+        void __iomem *mmdc_base, *reg;
+        u32 val;
+        int timeout = 0x400;
+
+        mmdc_base = of_iomap(np, 0);
+        WARN_ON(!mmdc_base);
+
+        reg = mmdc_base + MMDC_MAPSR;
+
+        /* Enable automatic power saving */
+        val = readl_relaxed(reg);
+        val &= ~(1 << BP_MMDC_MAPSR_PSD);
+        writel_relaxed(val, reg);
+
+        /* Ensure it's successfully enabled */
+        while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
+                cpu_relax();
+
+        if (unlikely(!timeout)) {
+                pr_warn("%s: failed to enable automatic power saving\n",
+                        __func__);
+                return -EBUSY;
+        }
+
+        return 0;
+}
+
+static struct of_device_id imx_mmdc_dt_ids[] = {
+        { .compatible = "fsl,imx6q-mmdc", },
+        { /* sentinel */ }
+};
+
+static struct platform_driver imx_mmdc_driver = {
+        .driver         = {
+                .name   = "imx-mmdc",
+                .owner  = THIS_MODULE,
+                .of_match_table = imx_mmdc_dt_ids,
+        },
+        .probe          = imx_mmdc_probe,
+};
+
+static int __init imx_mmdc_init(void)
+{
+        return platform_driver_register(&imx_mmdc_driver);
+}
+postcore_initcall(imx_mmdc_init);
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
new file mode 100644
index 000000000000..ab98c6fec9eb
--- /dev/null
+++ b/arch/arm/mach-imx/platsmp.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/page.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __iomem *scu_base;
+
+static struct map_desc scu_io_desc __initdata = {
+        /* .virtual and .pfn are run-time assigned */
+        .length         = SZ_4K,
+        .type           = MT_DEVICE,
+};
+
+void __init imx_scu_map_io(void)
+{
+        unsigned long base;
+
+        /* Get SCU base */
+        asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+        scu_io_desc.virtual = IMX_IO_P2V(base);
+        scu_io_desc.pfn = __phys_to_pfn(base);
+        iotable_init(&scu_io_desc, 1);
+
+        scu_base = IMX_IO_ADDRESS(base);
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+        /*
+         * if any interrupts are already enabled for the primary
+         * core (e.g. timer irq), then they will not have been enabled
+         * for us: do so
+         */
+        gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+        imx_set_cpu_jump(cpu, v7_secondary_startup);
+        imx_enable_cpu(cpu, true);
+        return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+        int i, ncores;
+
+        ncores = scu_get_core_count(scu_base);
+
+        for (i = 0; i < ncores; i++)
+                set_cpu_possible(i, true);
+
+        set_smp_cross_call(gic_raise_softirq);
+}
+
+void imx_smp_prepare(void)
+{
+        scu_enable(scu_base);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+        imx_smp_prepare();
+}
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
new file mode 100644
index 000000000000..f20f191d7cca
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+extern unsigned long phys_l2x0_saved_regs;
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+        cpu_do_idle();
+        return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+        switch (state) {
+        case PM_SUSPEND_MEM:
+                imx6q_set_lpm(STOP_POWER_OFF);
+                imx_gpc_pre_suspend();
+                imx_set_cpu_jump(0, v7_cpu_resume);
+                /* Zzz ... */
+                cpu_suspend(0, imx6q_suspend_finish);
+                imx_smp_prepare();
+                imx_gpc_post_resume();
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+        .enter = imx6q_pm_enter,
+        .valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_init(void)
+{
+        /*
+         * The l2x0 core code provides an infrastucture to save and restore
+         * l2x0 registers across suspend/resume cycle.  But because imx6q
+         * retains L2 content during suspend and needs to resume L2 before
+         * MMU is enabled, it can only utilize register saving support and
+         * have to take care of restoring on its own.  So we save physical
+         * address of the data structure used by l2x0 core to save registers,
+         * and later restore the necessary ones in imx6q resume entry.
+         */
+        phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
+
+        suspend_set_ops(&imx6q_pm_ops);
+}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
new file mode 100644
index 000000000000..36cacbd0dcc2
--- /dev/null
+++ b/arch/arm/mach-imx/src.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/unified.h>
+
+#define SRC_SCR                         0x000
+#define SRC_GPR1                        0x020
+#define BP_SRC_SCR_CORE1_RST            14
+#define BP_SRC_SCR_CORE1_ENABLE         22
+
+static void __iomem *src_base;
+
+void imx_enable_cpu(int cpu, bool enable)
+{
+        u32 mask, val;
+
+        mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+        val = readl_relaxed(src_base + SRC_SCR);
+        val = enable ? val | mask : val & ~mask;
+        writel_relaxed(val, src_base + SRC_SCR);
+}
+
+void imx_set_cpu_jump(int cpu, void *jump_addr)
+{
+        writel_relaxed(BSYM(virt_to_phys(jump_addr)),
+                       src_base + SRC_GPR1 + cpu * 8);
+}
+
+void __init imx_src_init(void)
+{
+        struct device_node *np;
+
+        np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+        src_base = of_iomap(np, 0);
+        WARN_ON(!src_base);
+}
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 0c427976d62f..0cc9094e5ee0 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -11,7 +11,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
new file mode 100644
index 000000000000..c550b6363488
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -0,0 +1,3 @@
+obj-y   := common.o
+obj-y   += time.o
+obj-y   += io.o
diff --git a/arch/arm/mach-picoxcell/Makefile.boot b/arch/arm/mach-picoxcell/Makefile.boot
new file mode 100644
index 000000000000..b3271754e9fd
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
new file mode 100644
index 000000000000..34d08347be5f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+static void __init picoxcell_init_machine(void)
+{
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *picoxcell_dt_match[] = {
+        "picochip,pc3x2",
+        "picochip,pc3x3",
+        NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+        { .compatible = "arm,pl192-vic" },
+        { /* Sentinel */ }
+};
+
+static void __init picoxcell_init_irq(void)
+{
+        vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
+        vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
+        irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
+        irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+}
+
+DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
+        .map_io         = picoxcell_map_io,
+        .nr_irqs        = ARCH_NR_IRQS,
+        .init_irq       = picoxcell_init_irq,
+        .timer          = &picoxcell_timer,
+        .init_machine   = picoxcell_init_machine,
+        .dt_compat      = picoxcell_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
new file mode 100644
index 000000000000..5263f0fa095c
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#ifndef __PICOXCELL_COMMON_H__
+#define __PICOXCELL_COMMON_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer picoxcell_timer;
+extern void picoxcell_map_io(void);
+
+#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8f2c234ed9d9
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#define UART_SHIFT 2
+
+                .macro  addruart, rp, rv
+                ldr     \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+                ldr     \rp, =PICOXCELL_UART1_BASE
+                .endm
+
+                .macro  senduart,rd,rx
+                str     \rd, [\rx, #UART_TX << UART_SHIFT]
+                .endm
+
+                .macro  busyuart,rd,rx
+1002:           ldr     \rd, [\rx, #UART_LSR << UART_SHIFT]
+                and     \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                teq     \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                bne     1002b
+                .endm
+
+                /* The UART's don't have any flow control IO's wired up. */
+                .macro  waituart,rd,rx
+                .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
new file mode 100644
index 000000000000..a6b09f75d9df
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -0,0 +1,19 @@
+/*
+ * entry-macro.S
+ *
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Low-level IRQ helper macros for picoXcell platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#define VA_VIC0         IO_ADDRESS(PICOXCELL_VIC0_BASE)
+#define VA_VIC1         IO_ADDRESS(PICOXCELL_VIC1_BASE)
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-picoxcell/include/mach/gpio.h b/arch/arm/mach-picoxcell/include/mach/gpio.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/gpio.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/hardware.h b/arch/arm/mach-picoxcell/include/mach/hardware.h
new file mode 100644
index 000000000000..70ff58192ec9
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/picoxcell_soc.h>
+
+#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/io.h b/arch/arm/mach-picoxcell/include/mach/io.h
new file mode 100644
index 000000000000..7573ec7d10a3
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No ioports, but needed for driver compatibility. */
+#define __io(a)                 __typesafe_io(a)
+/* No PCI possible on picoxcell. */
+#define __mem_pci(a)            (a)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h
new file mode 100644
index 000000000000..4d13ed970919
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/irqs.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_IRQS                    64
+#define NR_IRQS                         (128 + ARCH_NR_IRQS)
+
+#define IRQ_VIC0_BASE                   0
+#define IRQ_VIC1_BASE                   32
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-picoxcell/include/mach/map.h
new file mode 100644
index 000000000000..c06afad218bb
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/map.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_MAP_H__
+#define __PICOXCELL_MAP_H__
+
+#define PHYS_TO_IO(x)           (((x) & 0x00ffffff) | 0xfe000000)
+
+#ifdef __ASSEMBLY__
+#define IO_ADDRESS(x)           PHYS_TO_IO((x))
+#else
+#define IO_ADDRESS(x)           (void __iomem __force *)(PHYS_TO_IO((x)))
+#endif
+
+#endif /* __PICOXCELL_MAP_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/memory.h b/arch/arm/mach-picoxcell/include/mach/memory.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/memory.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
new file mode 100644
index 000000000000..5566fc88ddbc
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_SOC_H__
+#define __PICOXCELL_SOC_H__
+
+#define PICOXCELL_UART1_BASE            0x80230000
+#define PICOXCELL_PERIPH_BASE           0x80000000
+#define PICOXCELL_PERIPH_LENGTH         SZ_4M
+#define PICOXCELL_VIC0_BASE             0x80060000
+#define PICOXCELL_VIC1_BASE             0x80064000
+
+#endif /* __PICOXCELL_SOC_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
new file mode 100644
index 000000000000..67c589b0c1bc
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+        /*
+         * This should do all the clock switching and wait for interrupt
+         * tricks.
+         */
+        cpu_do_idle();
+}
+
+static inline void arch_reset(int mode, const char *cmd)
+{
+        /* Watchdog reset to go here. */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/timex.h b/arch/arm/mach-picoxcell/include/mach/timex.h
new file mode 100644
index 000000000000..6c540a69f405
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __TIMEX_H__
+#define __TIMEX_H__
+
+/* Bogus value to allow the kernel to compile. */
+#define CLOCK_TICK_RATE         1000000
+
+#endif /* __TIMEX_H__ */
+
diff --git a/arch/arm/mach-picoxcell/include/mach/uncompress.h b/arch/arm/mach-picoxcell/include/mach/uncompress.h
new file mode 100644
index 000000000000..b60b19d1d739
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
new file mode 100644
index 000000000000..0216cc4b1f0b
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#define VMALLOC_END     0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c
new file mode 100644
index 000000000000..39e9b9e8cc37
--- /dev/null
+++ b/arch/arm/mach-picoxcell/io.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+void __init picoxcell_map_io(void)
+{
+        struct map_desc io_map = {
+                .virtual        = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+                .pfn            = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+                .length         = PICOXCELL_PERIPH_LENGTH,
+                .type           = MT_DEVICE,
+        };
+
+        iotable_init(&io_map, 1);
+}
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
new file mode 100644
index 000000000000..90a554ff4499
--- /dev/null
+++ b/arch/arm/mach-picoxcell/time.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+#include "common.h"
+
+static void timer_get_base_and_rate(struct device_node *np,
+                                    void __iomem **base, u32 *rate)
+{
+        *base = of_iomap(np, 0);
+
+        if (!*base)
+                panic("Unable to map regs for %s", np->name);
+
+        if (of_property_read_u32(np, "clock-freq", rate))
+                panic("No clock-freq property for %s", np->name);
+}
+
+static void picoxcell_add_clockevent(struct device_node *event_timer)
+{
+        void __iomem *iobase;
+        struct dw_apb_clock_event_device *ced;
+        u32 irq, rate;
+
+        irq = irq_of_parse_and_map(event_timer, 0);
+        if (irq == NO_IRQ)
+                panic("No IRQ for clock event timer");
+
+        timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+        ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+                                     rate);
+        if (!ced)
+                panic("Unable to initialise clockevent device");
+
+        dw_apb_clockevent_register(ced);
+}
+
+static void picoxcell_add_clocksource(struct device_node *source_timer)
+{
+        void __iomem *iobase;
+        struct dw_apb_clocksource *cs;
+        u32 rate;
+
+        timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+        cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+        if (!cs)
+                panic("Unable to initialise clocksource device");
+
+        dw_apb_clocksource_start(cs);
+        dw_apb_clocksource_register(cs);
+}
+
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *sched_io_base;
+
+unsigned long long notrace sched_clock(void)
+{
+        cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+        return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace picoxcell_update_sched_clock(void)
+{
+        cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+        update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
+        { .compatible = "picochip,pc3x2-rtc" },
+        { /* Sentinel */ },
+};
+
+static void picoxcell_init_sched_clock(void)
+{
+        struct device_node *sched_timer;
+        u32 rate;
+
+        sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
+        if (!sched_timer)
+                panic("No RTC for sched clock to use");
+
+        timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+        of_node_put(sched_timer);
+
+        init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+}
+
+static const struct of_device_id picoxcell_timer_ids[] __initconst = {
+        { .compatible = "picochip,pc3x2-timer" },
+        {},
+};
+
+static void __init picoxcell_timer_init(void)
+{
+        struct device_node *event_timer, *source_timer;
+
+        event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
+        if (!event_timer)
+                panic("No timer for clockevent");
+        picoxcell_add_clockevent(event_timer);
+
+        source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
+        if (!source_timer)
+                panic("No timer for clocksource");
+        picoxcell_add_clocksource(source_timer);
+
+        of_node_put(source_timer);
+
+        picoxcell_init_sched_clock();
+}
+
+struct sys_timer picoxcell_timer = {
+        .init = picoxcell_timer_init,
+};
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 88633fe01a5d..67f75a0b66d6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -819,10 +819,10 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
         bool "Enable the L2x0 outer cache controller"
         depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-                   REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
+                   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
                    ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
                    ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
-                   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
+                   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
         default y
         select OUTER_CACHE
         select OUTER_CACHE_SYNC
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 4bdc975581eb..a08a95107a63 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -6,7 +6,7 @@ menu "Freescale MXC Implementations"
 
 choice
         prompt "Freescale CPU family:"
-        default ARCH_MX3
+        default ARCH_IMX_V6_V7
 
 config ARCH_IMX_V4_V5
         bool "i.MX1, i.MX21, i.MX25, i.MX27"
@@ -16,10 +16,13 @@ config ARCH_IMX_V4_V5
           This enables support for systems based on the Freescale i.MX ARMv4
           and ARMv5 SoCs
 
-config ARCH_MX3
-        bool "MX3-based"
+config ARCH_IMX_V6_V7
+        bool "i.MX3, i.MX6"
+        select AUTO_ZRELADDR if !ZBOOT_ROM
+        select ARM_PATCH_PHYS_VIRT
         help
-          This enables support for systems based on the Freescale i.MX3 family
+          This enables support for systems based on the Freescale i.MX3 and i.MX6
+          family.
 
 config ARCH_MX5
         bool "i.MX50, i.MX51, i.MX53"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index d53c35fe2ea7..b9f0f5f499a4 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,7 @@
 # Common support
 obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
 
-# MX51 uses the TZIC interrupt controller, older platforms use AVIC
+obj-$(CONFIG_ARM_GIC) += gic.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
new file mode 100644
index 000000000000..b3b8eed263b8
--- /dev/null
+++ b/arch/arm/plat-mxc/gic.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <asm/exception.h>
+#include <asm/localtimer.h>
+#include <asm/hardware/gic.h>
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+        u32 irqstat, irqnr;
+
+        do {
+                irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
+                irqnr = irqstat & 0x3ff;
+                if (irqnr == 1023)
+                        break;
+
+                if (irqnr > 29 && irqnr < 1021)
+                        handle_IRQ(irqnr, regs);
+#ifdef CONFIG_SMP
+                else if (irqnr < 16) {
+                        writel_relaxed(irqstat, gic_cpu_base_addr +
+                                                GIC_CPU_EOI);
+                        handle_IPI(irqnr, regs);
+                }
+#endif
+#ifdef CONFIG_LOCAL_TIMERS
+                else if (irqnr == 29) {
+                        writel_relaxed(irqstat, gic_cpu_base_addr +
+                                                GIC_CPU_EOI);
+                        handle_local_timer(regs);
+                }
+#endif
+        } while (1);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index c850af3650ea..83b745a5e1b7 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -13,6 +13,7 @@
 
 struct platform_device;
 struct clk;
+enum mxc_cpu_pwr_mode;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
@@ -66,6 +67,7 @@ extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
                         unsigned long ckih1, unsigned long ckih2);
 extern int mx51_clocks_init_dt(void);
 extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
         resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);
@@ -88,6 +90,7 @@ extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
+void gic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
@@ -98,10 +101,36 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx50_handle_irq tzic_handle_irq
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
+#define imx6q_handle_irq gic_handle_irq
 
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
 extern void imx51_babbage_common_init(void);
 extern void imx53_ard_common_init(void);
 extern void imx53_evk_common_init(void);
 extern void imx53_qsb_common_init(void);
 extern void imx53_smd_common_init(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_pm_init(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 72986013c1fb..6e192c4a391a 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,6 +24,8 @@
 #define UART_PADDR      MX51_UART1_BASE_ADDR
 #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR      MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR      MX6Q_UART4_BASE_ADDR
 #endif
 
 #define UART_VADDR      IMX_IO_ADDRESS(UART_PADDR)
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 842fbcb0d6cc..9fe0dfcf4e7e 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -22,3 +22,9 @@
 
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
         .endm
+
+        .macro test_for_ipi, irqnr, irqstat, base, tmp
+        .endm
+
+        .macro test_for_ltirq, irqnr, irqstat, base, tmp
+        .endm
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index eba3118adfbb..a599f01f8b92 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -91,6 +91,11 @@
  *      SPBA0   0x50000000+0x100000     ->      0xf5400000+0x100000
  *      AIPS1   0x53f00000+0x100000     ->      0xf5700000+0x100000
  *      AIPS2   0x63f00000+0x100000     ->      0xf5300000+0x100000
+ * mx6q:
+ *      SCU     0x00a00000+0x001000     ->      0xf4000000+0x001000
+ *      CCM     0x020c4000+0x004000     ->      0xf42c4000+0x004000
+ *      ANATOP  0x020c8000+0x001000     ->      0xf42c8000+0x001000
+ *      UART4   0x021f0000+0x004000     ->      0xf42f0000+0x004000
  */
 #define IMX_IO_P2V(x)   (                                               \
                         0xf4000000 +                                    \
@@ -102,6 +107,7 @@
 
 #include <mach/mxc.h>
 
+#include <mach/mx6q.h>
 #include <mach/mx50.h>
 #include <mach/mx51.h>
 #include <mach/mx53.h>
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 00e812bbd81d..fd9efb044656 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -14,9 +14,15 @@
 #include <asm-generic/gpio.h>
 
 /*
- * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
+ * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
+ * have 128 IRQs, and those with AVIC have 64.
+ *
+ * To support single image, the biggest number should be defined on
+ * top of the list.
  */
-#ifdef CONFIG_MXC_TZIC
+#if defined CONFIG_ARM_GIC
+#define MXC_INTERNAL_IRQS       160
+#elif defined CONFIG_MXC_TZIC
 #define MXC_INTERNAL_IRQS       128
 #else
 #define MXC_INTERNAL_IRQS       64
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
new file mode 100644
index 000000000000..254a561a2799
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x)                  IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x)              IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR              0x00a00000
+#define MX6Q_SCU_SIZE                   0x1000
+#define MX6Q_CCM_BASE_ADDR              0x020c4000
+#define MX6Q_CCM_SIZE                   0x4000
+#define MX6Q_ANATOP_BASE_ADDR           0x020c8000
+#define MX6Q_ANATOP_SIZE                0x1000
+#define MX6Q_UART4_BASE_ADDR            0x021f0000
+#define MX6Q_UART4_SIZE                 0x4000
+
+#endif  /* __MACH_MX6Q_H__ */