192 files changed, 3699 insertions, 4473 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 89aa89d526ac..8c6ee684174c 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -10,6 +10,8 @@ Introduction
  by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and
  the S3C2440 are supported CPUs.
+  Support for the S3C2400 series is in progress.
 Configuration
 -------------
@@ -32,6 +34,11 @@ Machines
    A general purpose development board, see EB2410ITX.txt for further
    details
+  Simtec Electronics IM2440D20 (Osiris)
+    CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
+    and a PCMCIA controller.
  Samsung SMDK2410
    Samsung's own development board, geared for PDA work.
@@ -85,6 +92,26 @@ Adding New Machines
  mailing list information.
+I2C
+---
+  The hardware I2C core in the CPU is supported in single master
+  mode, and can be configured via platform data.
+RTC
+---
+  Support for the onboard RTC unit, including alarm function.
+Watchdog
+--------
+  The onchip watchdog is available via the standard watchdog
+  interface.
 NAND
 ----
@@ -121,6 +148,15 @@ Clock Management
  various clock units
+Suspend to RAM
+--------------
+  For boards that provide support for suspend to RAM, the
+  system can be placed into low power suspend.
+  See Suspend.txt for more information.
 Platform Data
 -------------
@@ -158,6 +194,7 @@ Platform Data
        exported outside arch/arm/mach-s3c2410/, or exported to
        modules via EXPORT_SYMBOL() and related functions.
 Port Contributors
 -----------------
@@ -188,8 +225,11 @@ Document Changes
  08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
  08 Mar 2005 - BJD - Added section on adding machines
  09 Sep 2005 - BJD - Added section on platform data
+  11 Feb 2006 - BJD - Added I2C, RTC and Watchdog sections
+  11 Feb 2006 - BJD - Added Osiris machine, and S3C2400 information
 Document Author
 ---------------
-Ben Dooks, (c) 2004-2005 Simtec Electronics
+Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32ba00bd0a2f..0dd24ebdf6ac 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -108,6 +108,13 @@ config ARCH_EBSA110
          Ethernet interface, two PCMCIA sockets, two serial ports and a
          parallel port.
+config ARCH_EP93XX
+        bool "EP93xx-based"
+        select ARM_AMBA
+        select ARM_VIC
+        help
+          This enables support for the Cirrus EP93xx series of CPUs.
 config ARCH_FOOTBRIDGE
        bool "FootBridge"
        select FOOTBRIDGE
@@ -250,6 +257,8 @@ endchoice
 source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-ep93xx/Kconfig"
 source "arch/arm/mach-footbridge/Kconfig"
 source "arch/arm/mach-integrator/Kconfig"
@@ -434,6 +443,13 @@ config NO_IDLE_HZ
          Currently at least OMAP, PXA2xx and SA11x0 platforms are known
          to have accurate timekeeping with dynamic tick.
+config HZ
+        int
+        default 128 if ARCH_L7200
+        default 200 if ARCH_EBSA110 || ARCH_S3C2410
+        default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+        default 100
 config AEABI
        bool "Use the ARM EABI to compile the kernel"
        help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fbfc14a56b96..b5b1e4087516 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -105,6 +105,7 @@ endif
 machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
 machine-$(CONFIG_ARCH_REALVIEW)   := realview
 machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index c81a2ff6b5be..847e3e6356c6 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)       += sharpsl_param.o
 obj-$(CONFIG_SHARPSL_PM)        += sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)       += scoop.o
+obj-$(CONFIG_ARCH_IXP2000)      += uengine.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index ad6c89a555bb..7971d0dc6892 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -5,7 +5,7 @@
 *  limited DMA windows. These functions utilize bounce buffers to
 *  copy data to/from buffers located outside the DMA region. This
 *  only works for systems in which DMA memory is at the bottom of
- *  RAM and the remainder of memory is at the top an the DMA memory
+ *  RAM, the remainder of memory is at the top and the DMA memory
 *  can be marked as ZONE_DMA. Anything beyond that such as discontigous
 *  DMA windows will require custom implementations that reserve memory
 *  areas at early bootup.
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 23609400a8e2..a7dc1370695b 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -60,7 +60,7 @@ struct locomo {
        unsigned long phys;
        unsigned int irq;
        spinlock_t lock;
-        void *base;
+        void __iomem *base;
 };
 struct locomo_dev_info {
@@ -162,7 +162,7 @@ static void locomo_handler(unsigned int irq, struct irqdesc *desc,
 {
        int req, i;
        struct irqdesc *d;
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        /* Acknowledge the parent IRQ */
        desc->chip->ack(irq);
@@ -189,7 +189,7 @@ static void locomo_ack_irq(unsigned int irq)
 static void locomo_mask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_ICR);
        r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
@@ -198,7 +198,7 @@ static void locomo_mask_irq(unsigned int irq)
 static void locomo_unmask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_ICR);
        r |= (0x0010 << (irq - LOCOMO_IRQ_START));
@@ -215,7 +215,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc,
                            struct pt_regs *regs)
 {
        struct irqdesc *d;
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
                d = irq_desc + LOCOMO_IRQ_KEY_START;
@@ -225,7 +225,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc,
 static void locomo_key_ack_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
        r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
@@ -234,7 +234,7 @@ static void locomo_key_ack_irq(unsigned int irq)
 static void locomo_key_mask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
        r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -243,7 +243,7 @@ static void locomo_key_mask_irq(unsigned int irq)
 static void locomo_key_unmask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
        r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -261,7 +261,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc,
 {
        int req, i;
        struct irqdesc *d;
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        req =   locomo_readl(mapbase + LOCOMO_GIR) &
                locomo_readl(mapbase + LOCOMO_GPD) &
@@ -280,7 +280,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc,
 static void locomo_gpio_ack_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_GWE);
        r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -297,7 +297,7 @@ static void locomo_gpio_ack_irq(unsigned int irq)
 static void locomo_gpio_mask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_GIE);
        r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -306,7 +306,7 @@ static void locomo_gpio_mask_irq(unsigned int irq)
 static void locomo_gpio_unmask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_GIE);
        r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -323,7 +323,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc,
                           struct pt_regs *regs)
 {
        struct irqdesc *d;
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
                d = irq_desc + LOCOMO_IRQ_LT_START;
@@ -333,7 +333,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc,
 static void locomo_lt_ack_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_LTINT);
        r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
@@ -342,7 +342,7 @@ static void locomo_lt_ack_irq(unsigned int irq)
 static void locomo_lt_mask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_LTINT);
        r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -351,7 +351,7 @@ static void locomo_lt_mask_irq(unsigned int irq)
 static void locomo_lt_unmask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_LTINT);
        r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -369,7 +369,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
 {
        int req, i;
        struct irqdesc *d;
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F;
        if (req) {
@@ -386,7 +386,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
 static void locomo_spi_ack_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_SPIWE);
        r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -403,7 +403,7 @@ static void locomo_spi_ack_irq(unsigned int irq)
 static void locomo_spi_mask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_SPIIE);
        r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -412,7 +412,7 @@ static void locomo_spi_mask_irq(unsigned int irq)
 static void locomo_spi_unmask_irq(unsigned int irq)
 {
-        void *mapbase = get_irq_chipdata(irq);
+        void __iomem *mapbase = get_irq_chipdata(irq);
        unsigned int r;
        r = locomo_readl(mapbase + LOCOMO_SPIIE);
        r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -428,7 +428,7 @@ static struct irqchip locomo_spi_chip = {
 static void locomo_setup_irq(struct locomo *lchip)
 {
        int irq;
-        void *irqbase = lchip->base;
+        void __iomem *irqbase = lchip->base;
        /*
         * Install handler for IRQ_LOCOMO_HW.
@@ -501,12 +501,11 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
        struct locomo_dev *dev;
        int ret;
-        dev = kmalloc(sizeof(struct locomo_dev), GFP_KERNEL);
+        dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
        if (!dev) {
                ret = -ENOMEM;
                goto out;
        }
-        memset(dev, 0, sizeof(struct locomo_dev));
        strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
        /*
@@ -664,12 +663,10 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
        unsigned long r;
        int i, ret = -ENODEV;
-        lchip = kmalloc(sizeof(struct locomo), GFP_KERNEL);
+        lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
        if (!lchip)
                return -ENOMEM;
-        memset(lchip, 0, sizeof(struct locomo));
        spin_lock_init(&lchip->lock);
        lchip->dev = me;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 93352f6097c1..3f68db84e5e6 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -36,10 +37,6 @@
 #include <asm/hardware/sa1111.h>
-#ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
-#endif
 extern void __init sa1110_mb_enable(void);
 /*
@@ -51,6 +48,7 @@ extern void __init sa1110_mb_enable(void);
 */
 struct sa1111 {
        struct device   *dev;
+        struct clk      *clk;
        unsigned long   phys;
        int             irq;
        spinlock_t      lock;
@@ -451,19 +449,7 @@ static void sa1111_wake(struct sa1111 *sachip)
        spin_lock_irqsave(&sachip->lock, flags);
-#ifdef CONFIG_ARCH_SA1100
+        clk_enable(sachip->clk);
-        /*
-         * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
-         * (SA-1110 Developer's Manual, section 9.1.2.1)
-         */
-        GAFR |= GPIO_32_768kHz;
-        GPDR |= GPIO_32_768kHz;
-        TUCR = TUCR_3_6864MHz;
-#elif CONFIG_ARCH_PXA
-        pxa_gpio_mode(GPIO11_3_6MHz_MD);
-#else
-#error missing clock setup
-#endif
        /*
         * Turn VCO on, and disable PLL Bypass.
@@ -555,12 +541,11 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
        struct sa1111_dev *dev;
        int ret;
-        dev = kmalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
+        dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
        if (!dev) {
                ret = -ENOMEM;
                goto out;
        }
-        memset(dev, 0, sizeof(struct sa1111_dev));
        snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
                 "%4.4lx", info->offset);
@@ -635,11 +620,15 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
        unsigned int has_devs, val;
        int i, ret = -ENODEV;
-        sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL);
+        sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
        if (!sachip)
                return -ENOMEM;
-        memset(sachip, 0, sizeof(struct sa1111));
+        sachip->clk = clk_get(me, "GPIO27_CLK");
+        if (!sachip->clk) {
+                ret = PTR_ERR(sachip->clk);
+                goto err_free;
+        }
        spin_lock_init(&sachip->lock);
@@ -656,7 +645,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
        sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
        if (!sachip->base) {
                ret = -ENOMEM;
-                goto out;
+                goto err_clkput;
        }
        /*
@@ -666,7 +655,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
        if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
                printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
                ret = -ENODEV;
-                goto unmap;
+                goto err_unmap;
        }
        printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
@@ -726,9 +715,11 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
        return 0;
- unmap:
+ err_unmap:
        iounmap(sachip->base);
- out:
+ err_clkput:
+        clk_put(sachip->clk);
+ err_free:
        kfree(sachip);
        return ret;
 }
@@ -751,6 +742,8 @@ static void __sa1111_remove(struct sa1111 *sachip)
        sa1111_writel(0, irqbase + SA1111_WAKEEN0);
        sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+        clk_disable(sachip->clk);
        if (sachip->irq != NO_IRQ) {
                set_irq_chained_handler(sachip->irq, NULL);
                set_irq_data(sachip->irq, NULL);
@@ -759,6 +752,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
        }
        iounmap(sachip->base);
+        clk_put(sachip->clk);
        kfree(sachip);
 }
@@ -857,6 +851,8 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
        sa1111_writel(0, sachip->base + SA1111_SKPWM0);
        sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+        clk_disable(sachip->clk);
        spin_unlock_irqrestore(&sachip->lock, flags);
        return 0;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index a2dfe0b0f1ec..5e830f444c6c 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -132,12 +132,10 @@ int __init scoop_probe(struct platform_device *pdev)
        if (!mem)
                return -EINVAL;
-        devptr = kmalloc(sizeof(struct scoop_dev), GFP_KERNEL);
+        devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL);
        if (!devptr)
-                return  -ENOMEM;
+                return -ENOMEM;
-        memset(devptr, 0, sizeof(struct scoop_dev));
        spin_lock_init(&devptr->scoop_lock);
        inf = pdev->dev.platform_data;
diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/common/uengine.c
index ec4e007a22ef..a1310b71004e 100644
--- a/arch/arm/mach-ixp2000/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -19,7 +19,7 @@
 #include <linux/string.h>
 #include <asm/hardware.h>
 #include <asm/arch/ixp2000-regs.h>
-#include <asm/arch/uengine.h>
+#include <asm/hardware/uengine.h>
 #include <asm/io.h>
 #define USTORE_ADDRESS                  0x000
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index a45ed1687a59..a19bc4a6196d 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,22 +22,21 @@
 #include <linux/list.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
-static void __iomem *vic_base;
 static void vic_mask_irq(unsigned int irq)
 {
-        irq -= IRQ_VIC_START;
+        void __iomem *base = get_irq_chipdata(irq);
-        writel(1 << irq, vic_base + VIC_INT_ENABLE_CLEAR);
+        irq &= 31;
+        writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 }
 static void vic_unmask_irq(unsigned int irq)
 {
-        irq -= IRQ_VIC_START;
+        void __iomem *base = get_irq_chipdata(irq);
-        writel(1 << irq, vic_base + VIC_INT_ENABLE);
+        irq &= 31;
+        writel(1 << irq, base + VIC_INT_ENABLE);
 }
 static struct irqchip vic_chip = {
@@ -46,43 +45,49 @@ static struct irqchip vic_chip = {
        .unmask = vic_unmask_irq,
 };
-void __init vic_init(void __iomem *base, u32 vic_sources)
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+                     u32 vic_sources)
 {
        unsigned int i;
-        vic_base = base;
        /* Disable all interrupts initially. */
-        writel(0, vic_base + VIC_INT_SELECT);
+        writel(0, base + VIC_INT_SELECT);
-        writel(0, vic_base + VIC_INT_ENABLE);
+        writel(0, base + VIC_INT_ENABLE);
-        writel(~0, vic_base + VIC_INT_ENABLE_CLEAR);
+        writel(~0, base + VIC_INT_ENABLE_CLEAR);
-        writel(0, vic_base + VIC_IRQ_STATUS);
+        writel(0, base + VIC_IRQ_STATUS);
-        writel(0, vic_base + VIC_ITCR);
+        writel(0, base + VIC_ITCR);
-        writel(~0, vic_base + VIC_INT_SOFT_CLEAR);
+        writel(~0, base + VIC_INT_SOFT_CLEAR);
        /*
         * Make sure we clear all existing interrupts
         */
-        writel(0, vic_base + VIC_VECT_ADDR);
+        writel(0, base + VIC_VECT_ADDR);
        for (i = 0; i < 19; i++) {
                unsigned int value;
-                value = readl(vic_base + VIC_VECT_ADDR);
+                value = readl(base + VIC_VECT_ADDR);
-                writel(value, vic_base + VIC_VECT_ADDR);
+                writel(value, base + VIC_VECT_ADDR);
        }
        for (i = 0; i < 16; i++) {
-                void __iomem *reg = vic_base + VIC_VECT_CNTL0 + (i * 4);
+                void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
                writel(VIC_VECT_CNTL_ENABLE | i, reg);
        }
-        writel(32, vic_base + VIC_DEF_VECT_ADDR);
+        writel(32, base + VIC_DEF_VECT_ADDR);
        for (i = 0; i < 32; i++) {
-                unsigned int irq = IRQ_VIC_START + i;
+                unsigned int irq = irq_start + i;
                set_irq_chip(irq, &vic_chip);
+                set_irq_chipdata(irq, base);
                if (vic_sources & (1 << i)) {
                        set_irq_handler(irq, do_level_IRQ);
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/ep93xx_defconfig
index 5fdaf3ce9d56..8dcc8e8ec813 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,11 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
+# Linux kernel version: 2.6.16
-# Thu Nov 10 15:12:48 2005
+# Mon Mar 20 14:54:51 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -13,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -25,38 +23,42 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_IKCONFIG=y
-CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG_PROC=y
-# CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -70,14 +72,14 @@ CONFIG_KMOD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
@@ -86,11 +88,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
+# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -104,46 +107,44 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_ARCH_AT91RM9200 is not set
 #
-# Intel IXP2400/2800 Implementation Options
+# Cirrus EP93xx Implementation Options
 #
+CONFIG_CRUNCH=y
 #
-# IXP2400/2800 Platforms
+# EP93xx Platforms
 #
-CONFIG_ARCH_ENP2611=y
+CONFIG_MACH_GESBC9312=y
-# CONFIG_ARCH_IXDP2400 is not set
+CONFIG_MACH_TS72XX=y
-# CONFIG_ARCH_IXDP2800 is not set
-# CONFIG_ARCH_IXDP2401 is not set
-# CONFIG_ARCH_IXDP2801 is not set
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
+CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v5=y
+CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_XSCALE_PMU=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
+CONFIG_ARM_AMBA=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -155,6 +156,8 @@ CONFIG_PCI_LEGACY_PROC=y
 #
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -171,7 +174,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
 # CONFIG_XIP_KERNEL is not set
 #
@@ -197,6 +200,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_APM is not set
 #
 # Networking
@@ -206,10 +210,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -242,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -259,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 #
 # Network testing
@@ -278,21 +289,26 @@ CONFIG_TCP_CONG_BIC=y
 # Generic Driver Options
 #
 CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -312,7 +328,11 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -323,29 +343,31 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 #
 # Mapping drivers for chip access
 #
-CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PLATRAM is not set
 #
 # Self-contained MTD device drivers
 #
-# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -362,7 +384,11 @@ CONFIG_MTD_IXP2000=y
 #
 # NAND Flash Device Drivers
 #
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
 #
 # OneNAND Flash Device Drivers
@@ -381,19 +407,12 @@ CONFIG_MTD_IXP2000=y
 #
 # Block devices
 #
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
+# CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -401,7 +420,40 @@ CONFIG_BLK_DEV_INITRD=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
 #
 # Multi-device support (RAID and LVM)
@@ -416,28 +468,21 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 #
 # I2O device support
 #
-# CONFIG_I2O is not set
 #
 # Network device support
 #
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
+# CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 #
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
 # PHY device support
 #
 # CONFIG_PHYLIB is not set
@@ -447,66 +492,20 @@ CONFIG_DUMMY=y
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 #
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-#
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 #
 # Ethernet (10000 Mbit)
 #
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
 #
 # Token Ring devices
 #
-# CONFIG_TR is not set
 #
 # Wireless LAN (non-hamradio)
@@ -516,29 +515,7 @@ CONFIG_EEPRO100=y
 #
 # Wan interfaces
 #
-CONFIG_WAN=y
+# CONFIG_WAN is not set
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -554,28 +531,7 @@ CONFIG_DLCI_MAX=8
 #
 # Input device support
 #
-CONFIG_INPUT=y
+# CONFIG_INPUT is not set
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
 #
 # Hardware I/O ports
@@ -592,20 +548,18 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
-CONFIG_LEGACY_PTY_COUNT=256
 #
 # IPMI
@@ -622,23 +576,19 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
 #
-# PCI-based Watchdog Cards
+# USB-based Watchdog Cards
 #
-# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 #
@@ -663,27 +613,8 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
 #
@@ -691,17 +622,28 @@ CONFIG_I2C_IXP2000=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
+CONFIG_I2C_DEBUG_CORE=y
-# CONFIG_I2C_DEBUG_ALGO is not set
+CONFIG_I2C_DEBUG_ALGO=y
-# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_I2C_DEBUG_CHIP=y
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
 #
 # Hardware Monitoring support
@@ -716,6 +658,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -733,10 +676,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
@@ -776,14 +717,144 @@ CONFIG_HWMON=y
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 #
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+#
+# USB HID Boot Protocol drivers
+#
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+#
+# USB port drivers
+#
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+#
+# USB DSL modem support
+#
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -797,21 +868,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -830,8 +897,11 @@ CONFIG_DNOTIFY=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 #
@@ -843,6 +913,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 #
 # Miscellaneous filesystems
@@ -911,12 +982,52 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 #
 # Native Language Support
 #
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 #
 # Profiling support
@@ -927,13 +1038,14 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -941,9 +1053,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_WAITQ=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
@@ -969,6 +1082,6 @@ CONFIG_DEBUG_LL=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
deleted file mode 100644
index 60d66e82c51f..000000000000
--- a/arch/arm/configs/ixdp2401_defconfig
+++ /dev/null
@@ -1,976 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:14:50 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-#
-# Block layer
-#
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-#
-# Intel IXP2400/2800 Implementation Options
-#
-#
-# IXP2400/2800 Platforms
-#
-# CONFIG_ARCH_ENP2611 is not set
-# CONFIG_ARCH_IXDP2400 is not set
-# CONFIG_ARCH_IXDP2800 is not set
-CONFIG_ARCH_IXDP2401=y
-# CONFIG_ARCH_IXDP2801 is not set
-CONFIG_ARCH_IXDP2X01=y
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-#
-# Floating point emulation
-#
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-#
-# Power management options
-#
-# CONFIG_PM is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
deleted file mode 100644
index 4248123815e9..000000000000
--- a/arch/arm/configs/ixdp2800_defconfig
+++ /dev/null
@@ -1,975 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:14:56 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-#
-# Block layer
-#
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-#
-# Intel IXP2400/2800 Implementation Options
-#
-#
-# IXP2400/2800 Platforms
-#
-# CONFIG_ARCH_ENP2611 is not set
-# CONFIG_ARCH_IXDP2400 is not set
-CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2X00=y
-# CONFIG_ARCH_IXDP2401 is not set
-# CONFIG_ARCH_IXDP2801 is not set
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-#
-# Floating point emulation
-#
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-#
-# Power management options
-#
-# CONFIG_PM is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
deleted file mode 100644
index f54f3dcc5b33..000000000000
--- a/arch/arm/configs/ixdp2801_defconfig
+++ /dev/null
@@ -1,976 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:15:03 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-#
-# Block layer
-#
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-#
-# Intel IXP2400/2800 Implementation Options
-#
-#
-# IXP2400/2800 Platforms
-#
-# CONFIG_ARCH_ENP2611 is not set
-# CONFIG_ARCH_IXDP2400 is not set
-# CONFIG_ARCH_IXDP2800 is not set
-# CONFIG_ARCH_IXDP2401 is not set
-CONFIG_ARCH_IXDP2801=y
-CONFIG_ARCH_IXDP2X01=y
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-#
-# Floating point emulation
-#
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-#
-# Power management options
-#
-# CONFIG_PM is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixp2000_defconfig
index c67fc449a11f..7b02ca04c3ee 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,11 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
+# Linux kernel version: 2.6.16-rc2
-# Thu Nov 10 15:14:13 2005
+# Wed Feb  8 04:49:11 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -29,27 +28,31 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 #
 # Loadable module support
@@ -104,6 +107,7 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 #
@@ -113,12 +117,13 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 #
 # IXP2400/2800 Platforms
 #
-# CONFIG_ARCH_ENP2611 is not set
+CONFIG_ARCH_ENP2611=y
 CONFIG_ARCH_IXDP2400=y
-# CONFIG_ARCH_IXDP2800 is not set
+CONFIG_ARCH_IXDP2800=y
 CONFIG_ARCH_IXDP2X00=y
-# CONFIG_ARCH_IXDP2401 is not set
+CONFIG_ARCH_IXDP2401=y
-# CONFIG_ARCH_IXDP2801 is not set
+CONFIG_ARCH_IXDP2801=y
+CONFIG_ARCH_IXDP2X01=y
 # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 #
@@ -141,7 +146,6 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
@@ -156,6 +160,7 @@ CONFIG_PCI_LEGACY_PROC=y
 #
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -198,6 +203,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_APM is not set
 #
 # Networking
@@ -243,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -260,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 #
 # Network testing
@@ -284,6 +294,11 @@ CONFIG_STANDALONE=y
 # CONFIG_DEBUG_DRIVER is not set
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -331,6 +346,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 # CONFIG_MTD_XIP is not set
 #
@@ -466,6 +482,7 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
+CONFIG_CS89x0=y
 # CONFIG_DGRS is not set
 CONFIG_EEPRO100=y
 # CONFIG_E100 is not set
@@ -486,12 +503,14 @@ CONFIG_EEPRO100=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+CONFIG_ENP2611_MSF_NET=y
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -595,7 +614,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 #
@@ -603,7 +623,6 @@ CONFIG_SERIAL_8250_NR_UARTS=1
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -705,6 +724,12 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_CHIP is not set
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+#
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
@@ -738,6 +763,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
@@ -813,6 +839,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -844,6 +871,7 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 #
 # Miscellaneous filesystems
@@ -912,6 +940,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 #
@@ -928,12 +957,13 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -942,6 +972,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 6695b07cf1ba..3cec29d56c8e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
+# Linux kernel version: 2.6.16
-# Mon Feb  6 11:17:23 2006
+# Mon Mar 20 20:36:02 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -12,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -87,6 +86,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
@@ -111,6 +111,7 @@ CONFIG_ARCH_S3C2410=y
 # S3C24XX Implementations
 #
 CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_OSIRIS=y
 CONFIG_ARCH_BAST=y
 CONFIG_BAST_PC104_IRQ=y
 CONFIG_ARCH_H1940=y
@@ -175,6 +176,7 @@ CONFIG_ISA=y
 #
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=200
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -230,6 +232,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
@@ -364,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
 #
 # Mapping drivers for chip access
@@ -431,6 +433,7 @@ CONFIG_PARPORT_1284=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -623,7 +626,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
@@ -686,6 +688,11 @@ CONFIG_S3C2410_WATCHDOG=y
 # CONFIG_PCWATCHDOG is not set
 # CONFIG_MIXCOMWD is not set
 # CONFIG_WDT is not set
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
 CONFIG_S3C2410_RTC=y
@@ -751,6 +758,11 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_SPI_MASTER is not set
 #
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+#
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
@@ -763,6 +775,7 @@ CONFIG_HWMON_VID=m
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -850,16 +863,138 @@ CONFIG_FONT_8x16=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 #
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+#
+# USB DSL modem support
+#
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
 #
 # MMC/SD Card support
diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c
index 766b6c05c6db..2bed290fec76 100644
--- a/arch/arm/kernel/apm.c
+++ b/arch/arm/kernel/apm.c
@@ -357,10 +357,8 @@ static int apm_open(struct inode * inode, struct file * filp)
 {
        struct apm_user *as;
-        as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
+        as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
        if (as) {
-                memset(as, 0, sizeof(*as));
                /*
                 * XXX - this is a tiny bit broken, when we consider BSD
                 * process accounting. If the device is opened by root, we
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index c4923fac8dff..de606dfa8db9 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -540,12 +540,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
        int nr, busnr;
        for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
-                sys = kmalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
+                sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
                if (!sys)
                        panic("PCI: unable to allocate sys data!");
-                memset(sys, 0, sizeof(struct pci_sys_data));
                sys->hw      = hw;
                sys->busnr   = busnr;
                sys->swizzle = hw->swizzle;
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index caaa919ab47a..da280bae3d07 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -11,7 +11,6 @@
 */
 #include <linux/config.h>
 #include <linux/linkage.h>
-#include <asm/hardware.h>
                .text
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 74ea29c3205e..00aa225e8d95 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -807,14 +807,12 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
        unsigned long base;
        int i;
-        ec = kmalloc(sizeof(ecard_t), GFP_KERNEL);
+        ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
        if (!ec) {
                ec = ERR_PTR(-ENOMEM);
                goto nomem;
        }
-        memset(ec, 0, sizeof(ecard_t));
        ec->slot_no = slot;
        ec->type = type;
        ec->irq = NO_IRQ;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index ec48d70c6d8b..355914ffb192 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -484,7 +484,6 @@ call_fpe:
        movcss  r7, r5, lsr #(TIF_USING_IWMMXT + 1)
        bcs     iwmmxt_task_enable
 #endif
-        enable_irq
        add     pc, pc, r8, lsr #6
        mov     r0, r0
@@ -511,6 +510,7 @@ call_fpe:
        mov     pc, lr                          @ CP#15 (Control)
 do_fpe:
+        enable_irq
        ldr     r4, .LCfp
        add     r10, r10, #TI_FPSTATE           @ r10 = workspace
        ldr     pc, [r4]                        @ Call FP module USR entry point
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 1aca1775b28f..84277fe818a1 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -28,10 +28,9 @@
 #define PROCINFO_INITFUNC       12
 #define MACHINFO_TYPE           0
-#define MACHINFO_PHYSRAM        4
+#define MACHINFO_PHYSIO         4
-#define MACHINFO_PHYSIO         8
+#define MACHINFO_PGOFFIO        8
-#define MACHINFO_PGOFFIO        12
+#define MACHINFO_NAME           12
-#define MACHINFO_NAME           16
 #define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET)
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 1d50d2b98f55..2d5896b36181 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -305,14 +305,19 @@ report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int
        static int count = 100;
        struct irqaction *action;
-        if (!count || noirqdebug)
+        if (noirqdebug)
                return;
-        count--;
        if (ret != IRQ_HANDLED && ret != IRQ_NONE) {
+                if (!count)
+                        return;
+                count--;
                printk("irq%u: bogus retval mask %x\n", irq, ret);
        } else {
+                desc->irqs_unhandled++;
+                if (desc->irqs_unhandled <= 99900)
+                        return;
+                desc->irqs_unhandled = 0;
                printk("irq%u: nobody cared\n", irq);
        }
        show_regs(regs);
diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S
index b3fb475b4120..9183b06c0e2f 100644
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@@ -9,28 +9,32 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/param.h>
                .text
 .LC0:           .word   loops_per_jiffy
+.LC1:           .word   (2199023*HZ)>>11
 /*
- * 0 <= r0 <= 2000
+ * r0  <= 2000
+ * lpj <= 0x01ffffff (max. 3355 bogomips)
+ * HZ  <= 1000
 */
 ENTRY(__udelay)
-                mov     r2,     #0x6800
+                ldr     r2, .LC1
-                orr     r2, r2, #0x00db
                mul     r0, r2, r0
-ENTRY(__const_udelay)                           @ 0 <= r0 <= 0x01ffffff
+ENTRY(__const_udelay)                           @ 0 <= r0 <= 0x7fffff06
                ldr     r2, .LC0
-                ldr     r2, [r2]                @ max = 0x0fffffff
+                ldr     r2, [r2]                @ max = 0x01ffffff
-                mov     r0, r0, lsr #11         @ max = 0x00003fff
+                mov     r0, r0, lsr #14         @ max = 0x0001ffff
-                mov     r2, r2, lsr #11         @ max = 0x0003ffff
+                mov     r2, r2, lsr #10         @ max = 0x00007fff
                mul     r0, r2, r0              @ max = 2^32-1
                movs    r0, r0, lsr #6
                RETINSTR(moveq,pc,lr)
 /*
- * loops = (r0 * 0x10c6 * 100 * loops_per_jiffy) / 2^32
+ * loops = r0 * HZ * loops_per_jiffy / 1000000
 *
 * Oh, if only we had a cycle counter...
 */
diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S
index b153523631c3..1b197ea7aab3 100644
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/lib/io-acorn.S
@@ -12,7 +12,6 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
                .text
                .align
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
index ec8195a2a3cc..8b95467c6d61 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91rm9200/clock.c
@@ -201,6 +201,54 @@ static struct clk ohci_clk = {
        .pmc_mask       = 1 << AT91_ID_UHP,
        .mode           = pmc_periph_mode,
 };
+static struct clk ether_clk = {
+        .name           = "ether_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_EMAC,
+        .mode           = pmc_periph_mode,
+};
+static struct clk mmc_clk = {
+        .name           = "mci_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_MCI,
+        .mode           = pmc_periph_mode,
+};
+static struct clk twi_clk = {
+        .name           = "twi_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_TWI,
+        .mode           = pmc_periph_mode,
+};
+static struct clk usart0_clk = {
+        .name           = "usart0_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_US0,
+        .mode           = pmc_periph_mode,
+};
+static struct clk usart1_clk = {
+        .name           = "usart1_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_US1,
+        .mode           = pmc_periph_mode,
+};
+static struct clk usart2_clk = {
+        .name           = "usart2_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_US2,
+        .mode           = pmc_periph_mode,
+};
+static struct clk usart3_clk = {
+        .name           = "usart3_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_US3,
+        .mode           = pmc_periph_mode,
+};
+static struct clk spi_clk = {
+        .name           = "spi0_clk",
+        .parent         = &mck,
+        .pmc_mask       = 1 << AT91_ID_SPI,
+        .mode           = pmc_periph_mode,
+};
 static struct clk *const clock_list[] = {
        /* four primary clocks -- MUST BE FIRST! */
@@ -223,15 +271,18 @@ static struct clk *const clock_list[] = {
        /* MCK and peripherals */
        &mck,
-        // usart0..usart3
+        &usart0_clk,
-        // mmc
+        &usart1_clk,
+        &usart2_clk,
+        &usart3_clk,
+        &mmc_clk,
        &udc_clk,
-        // i2c
+        &twi_clk,
-        // spi
+        &spi_clk,
        // ssc0..ssc2
        // tc0..tc5
        &ohci_clk,
-        // ether
+        &ether_clk,
 };
@@ -360,7 +411,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
                        u32     pckr;
                        pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-                        pckr &= 0x03;
+                        pckr &= AT91_PMC_CSS_PLLB;      /* clock selection */
                        pckr |= prescale << 2;
                        at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
                        clk->rate_hz = actual;
@@ -440,7 +491,7 @@ static int at91_clk_show(struct seq_file *s, void *unused)
                else
                        state = "";
-                seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n",
+                seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
                        clk->name, clk->users, state, clk_get_rate(clk),
                        clk->parent ? clk->parent->name : "");
        }
@@ -483,11 +534,18 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
                freq *= mul + 1;
        } else
                freq = 0;
-        if (pll == &pllb && (reg & (1 << 28)))
-                freq /= 2;
        return freq;
 }
+static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
+{
+        if (pll == &pllb && (reg & AT91_PMC_USB96M))
+                return freq / 2;
+        else
+                return freq;
+}
 static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
 {
        unsigned i, div = 0, mul = 0, diff = 1 << 30;
@@ -550,8 +608,8 @@ int __init at91_clock_init(unsigned long main_clock)
        if (!main_clock) {
                do {
                        tmp = at91_sys_read(AT91_CKGR_MCFR);
-                } while (!(tmp & 0x10000));
+                } while (!(tmp & AT91_PMC_MAINRDY));
-                main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16);
+                main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
        }
        main_clk.rate_hz = main_clock;
@@ -566,13 +624,16 @@ int __init at91_clock_init(unsigned long main_clock)
         *
         * REVISIT:  assumes MCK doesn't derive from PLLB!
         */
-        at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000;
+        at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
        pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
        at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP));
        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
        at91_sys_write(AT91_CKGR_PLLBR, 0);
        at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
+        udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+        uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
        /*
         * MCK and CPU derive from one of those primary clocks.
         * For now, assume this parentage won't change.
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 0e396feec468..5ab46274e1a3 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -261,7 +261,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
        void __iomem    *pio;
        u32             isr;
-        pio = (void __force __iomem *) desc->chipdata;
+        pio = desc->base;
        /* temporarily mask (level sensitive) parent IRQ */
        desc->chip->ack(irq);
@@ -312,7 +312,7 @@ void __init at91_gpio_irq_setup(unsigned banks)
                __raw_writel(~0, controller + PIO_IDR);
                set_irq_data(id, (void *) pin);
-                set_irq_chipdata(id, (void __force *) controller);
+                set_irq_chipdata(id, controller);
                for (i = 0; i < 32; i++, pin++) {
                        set_irq_chip(pin, &gpio_irqchip);
diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c
index 1b6dd2deeb22..7ffcf443b99f 100644
--- a/arch/arm/mach-at91rm9200/time.c
+++ b/arch/arm/mach-at91rm9200/time.c
@@ -71,11 +71,11 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r
        if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
                write_seqlock(&xtime_lock);
-                do {
+                while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) {
                        timer_tick(regs);
                        rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV;
                        at91_sys_write(AT91_ST_RTAR, rtar);
-                } while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH);
+                }
                write_sequnlock(&xtime_lock);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
new file mode 100644
index 000000000000..cec5a21ca4e3
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_EP93XX
+menu "Cirrus EP93xx Implementation Options"
+comment "EP93xx Platforms"
+config MACH_GESBC9312
+        bool "Support Glomation GESBC-9312-sx"
+        help
+          Say 'Y' here if you want your kernel to support the Glomation
+          GESBC-9312-sx board.
+config MACH_TS72XX
+        bool "Support Technologic Systems TS-72xx SBC"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Technologic Systems TS-72xx board.
+endmenu
+endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
new file mode 100644
index 000000000000..5393af989e94
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux kernel.
+#
+obj-y                   := core.o
+obj-m                   :=
+obj-n                   :=
+obj-                    :=
+obj-$(CONFIG_MACH_GESBC9312)    += gesbc9312.o
+obj-$(CONFIG_MACH_TS72XX)       += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
new file mode 100644
index 000000000000..d5561ad15bad
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y   := 0x00008000
+params_phys-y   := 0x00000100
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
new file mode 100644
index 000000000000..865427bfad7e
--- /dev/null
+++ b/arch/arm/mach-ep93xx/core.c
@@ -0,0 +1,374 @@
+/*
+ * arch/arm/mach-ep93xx/core.c
+ * Core routines for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * Thanks go to Michael Burian and Ray Lehtiniemi for their key
+ * role in the ep93xx linux community.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+#include <linux/amba/bus.h>
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/gpio.h>
+#include <asm/hardware/vic.h>
+/*************************************************************************
+ * Static I/O mappings that are needed for all EP93xx platforms
+ *************************************************************************/
+static struct map_desc ep93xx_io_desc[] __initdata = {
+        {
+                .virtual        = EP93XX_AHB_VIRT_BASE,
+                .pfn            = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
+                .length         = EP93XX_AHB_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = EP93XX_APB_VIRT_BASE,
+                .pfn            = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
+                .length         = EP93XX_APB_SIZE,
+                .type           = MT_DEVICE,
+        },
+};
+void __init ep93xx_map_io(void)
+{
+        iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
+}
+/*************************************************************************
+ * Timer handling for EP93xx
+ *************************************************************************
+ * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
+ * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
+ * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
+ * is free-running, and can't generate interrupts.
+ *
+ * The 508 kHz timers are ideal for use for the timer interrupt, as the
+ * most common values of HZ divide 508 kHz nicely.  We pick one of the 16
+ * bit timers (timer 1) since we don't need more than 16 bits of reload
+ * value as long as HZ >= 8.
+ *
+ * The higher clock rate of timer 4 makes it a better choice than the
+ * other timers for use in gettimeoffset(), while the fact that it can't
+ * generate interrupts means we don't have to worry about not being able
+ * to use this timer for something else.  We also use timer 4 for keeping
+ * track of lost jiffies.
+ */
+static unsigned int last_jiffy_time;
+#define TIMER4_TICKS_PER_JIFFY          ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+        write_seqlock(&xtime_lock);
+        __raw_writel(1, EP93XX_TIMER1_CLEAR);
+        while (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time
+                                                >= TIMER4_TICKS_PER_JIFFY) {
+                last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
+                timer_tick(regs);
+        }
+        write_sequnlock(&xtime_lock);
+        return IRQ_HANDLED;
+}
+static struct irqaction ep93xx_timer_irq = {
+        .name           = "ep93xx timer",
+        .flags          = SA_INTERRUPT | SA_TIMER,
+        .handler        = ep93xx_timer_interrupt,
+};
+static void __init ep93xx_timer_init(void)
+{
+        /* Enable periodic HZ timer.  */
+        __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
+        __raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD);
+        __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+        /* Enable lost jiffy timer.  */
+        __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+        setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
+}
+static unsigned long ep93xx_gettimeoffset(void)
+{
+        int offset;
+        offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+        /* Calculate (1000000 / 983040) * offset.  */
+        return offset + (53 * offset / 3072);
+}
+struct sys_timer ep93xx_timer = {
+        .init           = ep93xx_timer_init,
+        .offset         = ep93xx_gettimeoffset,
+};
+/*************************************************************************
+ * GPIO handling for EP93xx
+ *************************************************************************/
+static unsigned char gpio_int_enable[2];
+static unsigned char gpio_int_type1[2];
+static unsigned char gpio_int_type2[2];
+static void update_gpio_ab_int_params(int port)
+{
+        if (port == 0) {
+                __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
+                __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
+                __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
+                __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
+        } else if (port == 1) {
+                __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
+                __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
+                __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
+                __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+        }
+}
+static unsigned char data_register_offset[8] = {
+        0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
+};
+static unsigned char data_direction_register_offset[8] = {
+        0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
+};
+void gpio_line_config(int line, int direction)
+{
+        unsigned int data_direction_register;
+        unsigned long flags;
+        unsigned char v;
+        data_direction_register =
+                EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
+        local_irq_save(flags);
+        if (direction == GPIO_OUT) {
+                if (line >= 0 && line < 16) {
+                        gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
+                        update_gpio_ab_int_params(line >> 3);
+                }
+                v = __raw_readb(data_direction_register);
+                v |= 1 << (line & 7);
+                __raw_writeb(v, data_direction_register);
+        } else if (direction == GPIO_IN) {
+                v = __raw_readb(data_direction_register);
+                v &= ~(1 << (line & 7));
+                __raw_writeb(v, data_direction_register);
+        }
+        local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_config);
+int gpio_line_get(int line)
+{
+        unsigned int data_register;
+        data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+        return !!(__raw_readb(data_register) & (1 << (line & 7)));
+}
+EXPORT_SYMBOL(gpio_line_get);
+void gpio_line_set(int line, int value)
+{
+        unsigned int data_register;
+        unsigned long flags;
+        unsigned char v;
+        data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+        local_irq_save(flags);
+        if (value == EP93XX_GPIO_HIGH) {
+                v = __raw_readb(data_register);
+                v |= 1 << (line & 7);
+                __raw_writeb(v, data_register);
+        } else if (value == EP93XX_GPIO_LOW) {
+                v = __raw_readb(data_register);
+                v &= ~(1 << (line & 7));
+                __raw_writeb(v, data_register);
+        }
+        local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_set);
+/*************************************************************************
+ * EP93xx IRQ handling
+ *************************************************************************/
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
+                struct irqdesc *desc, struct pt_regs *regs)
+{
+        unsigned char status;
+        int i;
+        status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+        for (i = 0; i < 8; i++) {
+                if (status & (1 << i)) {
+                        desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
+                        desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs);
+                }
+        }
+        status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+        for (i = 0; i < 8; i++) {
+                if (status & (1 << i)) {
+                        desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
+                        desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs);
+                }
+        }
+}
+static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+{
+        int line = irq - IRQ_EP93XX_GPIO(0);
+        int port = line >> 3;
+        gpio_int_enable[port] &= ~(1 << (line & 7));
+        update_gpio_ab_int_params(port);
+        if (line >> 3) {
+                __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+        } else {
+                __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+        }
+}
+static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+{
+        int line = irq - IRQ_EP93XX_GPIO(0);
+        int port = line >> 3;
+        gpio_int_enable[port] &= ~(1 << (line & 7));
+        update_gpio_ab_int_params(port);
+}
+static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+{
+        int line = irq - IRQ_EP93XX_GPIO(0);
+        int port = line >> 3;
+        gpio_int_enable[port] |= 1 << (line & 7);
+        update_gpio_ab_int_params(port);
+}
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+{
+        int port;
+        int line;
+        line = irq - IRQ_EP93XX_GPIO(0);
+        gpio_line_config(line, GPIO_IN);
+        port = line >> 3;
+        line &= 7;
+        if (type & IRQT_RISING) {
+                gpio_int_type1[port] |= 1 << line;
+                gpio_int_type2[port] |= 1 << line;
+        } else if (type & IRQT_FALLING) {
+                gpio_int_type1[port] |= 1 << line;
+                gpio_int_type2[port] &= ~(1 << line);
+        } else if (type & IRQT_HIGH) {
+                gpio_int_type1[port] &= ~(1 << line);
+                gpio_int_type2[port] |= 1 << line;
+        } else if (type & IRQT_LOW) {
+                gpio_int_type1[port] &= ~(1 << line);
+                gpio_int_type2[port] &= ~(1 << line);
+        }
+        update_gpio_ab_int_params(port);
+        return 0;
+}
+static struct irqchip ep93xx_gpio_ab_irq_chip = {
+        .ack            = ep93xx_gpio_ab_irq_mask_ack,
+        .mask           = ep93xx_gpio_ab_irq_mask,
+        .unmask         = ep93xx_gpio_ab_irq_unmask,
+        .set_type       = ep93xx_gpio_ab_irq_type,
+};
+void __init ep93xx_init_irq(void)
+{
+        int irq;
+        vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
+        vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+        for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
+                set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+                set_irq_handler(irq, do_level_IRQ);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+        set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+}
+/*************************************************************************
+ * EP93xx peripheral handling
+ *************************************************************************/
+void __init ep93xx_init_devices(void)
+{
+        unsigned int v;
+        /*
+         * Disallow access to MaverickCrunch initially.
+         */
+        v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+        v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+        __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+        __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+}
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
new file mode 100644
index 000000000000..d18fcb1a2f1b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ep93xx/gesbc9312.c
+ * Glomation GESBC-9312-sx support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+static void __init gesbc9312_init_machine(void)
+{
+        ep93xx_init_devices();
+        physmap_configure(0x60000000, 0x00800000, 4, NULL);
+}
+MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
+        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .map_io         = ep93xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = gesbc9312_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
new file mode 100644
index 000000000000..777e75daa8a5
--- /dev/null
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-ep93xx/ts72xx.c
+ * Technologic Systems TS72xx SBC support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+static struct map_desc ts72xx_io_desc[] __initdata = {
+        {
+                .virtual        = TS72XX_MODEL_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
+                .length         = TS72XX_MODEL_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = TS72XX_OPTIONS_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
+                .length         = TS72XX_OPTIONS_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = TS72XX_OPTIONS2_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
+                .length         = TS72XX_OPTIONS2_SIZE,
+                .type           = MT_DEVICE,
+        }
+};
+static struct map_desc ts72xx_nand_io_desc[] __initdata = {
+        {
+                .virtual        = TS72XX_NAND_DATA_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE),
+                .length         = TS72XX_NAND_DATA_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = TS72XX_NAND_CONTROL_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE),
+                .length         = TS72XX_NAND_CONTROL_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = TS72XX_NAND_BUSY_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE),
+                .length         = TS72XX_NAND_BUSY_SIZE,
+                .type           = MT_DEVICE,
+        }
+};
+static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = {
+        {
+                .virtual        = TS72XX_NAND_DATA_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE),
+                .length         = TS72XX_NAND_DATA_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = TS72XX_NAND_CONTROL_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE),
+                .length         = TS72XX_NAND_CONTROL_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = TS72XX_NAND_BUSY_VIRT_BASE,
+                .pfn            = __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE),
+                .length         = TS72XX_NAND_BUSY_SIZE,
+                .type           = MT_DEVICE,
+        }
+};
+static void __init ts72xx_map_io(void)
+{
+        ep93xx_map_io();
+        iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
+        /*
+         * The TS-7200 has NOR flash, the other models have NAND flash.
+         */
+        if (!board_is_ts7200()) {
+                if (is_ts9420_installed()) {
+                        iotable_init(ts72xx_alternate_nand_io_desc,
+                                ARRAY_SIZE(ts72xx_alternate_nand_io_desc));
+                } else {
+                        iotable_init(ts72xx_nand_io_desc,
+                                ARRAY_SIZE(ts72xx_nand_io_desc));
+                }
+        }
+}
+static void __init ts72xx_init_machine(void)
+{
+        ep93xx_init_devices();
+        if (board_is_ts7200())
+                physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL);
+}
+MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
+        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .map_io         = ts72xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = ts72xx_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index e79884eea1f7..5dace2597838 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -255,14 +255,12 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
        if (nr || !footbridge_cfn_mode())
                return 0;
-        res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+        res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
        if (!res) {
                printk("out of memory for root bus resources");
                return 0;
        }
-        memset(res, 0, sizeof(struct resource) * 2);
        res[0].flags = IORESOURCE_MEM;
        res[0].name  = "Footbridge non-prefetch";
        res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index a85d471c5bfa..92d79fb39311 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -355,12 +355,11 @@ static int impd1_probe(struct lm_device *dev)
        if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
                return -EBUSY;
-        impd1 = kmalloc(sizeof(struct impd1_module), GFP_KERNEL);
+        impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
        if (!impd1) {
                ret = -ENOMEM;
                goto release_lm;
        }
-        memset(impd1, 0, sizeof(struct impd1_module));
        impd1->base = ioremap(dev->resource.start, SZ_4K);
        if (!impd1->base) {
@@ -389,12 +388,10 @@ static int impd1_probe(struct lm_device *dev)
                pc_base = dev->resource.start + idev->offset;
-                d = kmalloc(sizeof(struct amba_device), GFP_KERNEL);
+                d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
                if (!d)
                        continue;
-                memset(d, 0, sizeof(struct amba_device));
                snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
                         "lm%x:%5.5lx", dev->id, idev->offset >> 12);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index d8d3c2a5a97e..6d65c96ebfd2 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -319,12 +319,10 @@ static void __init ap_init(void)
                if ((sc_dec & (16 << i)) == 0)
                        continue;
-                lmdev = kmalloc(sizeof(struct lm_device), GFP_KERNEL);
+                lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
                if (!lmdev)
                        continue;
-                memset(lmdev, 0, sizeof(struct lm_device));
                lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
                lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
                lmdev->resource.flags = IORESOURCE_MEM;
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
index c6a973ba8fc6..f3c6413fa5bd 100644
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ b/arch/arm/mach-iop3xx/iq31244-pci.c
@@ -74,12 +74,10 @@ static int iq31244_setup(int nr, struct pci_sys_data *sys)
        if(nr != 0)
                return 0;
-        res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+        res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
        if (!res)
                panic("PCI: unable to alloc resources");
-        memset(res, 0, sizeof(struct resource) * 2);
        res[0].start = IOP321_PCI_LOWER_IO_VA;
        res[0].end   = IOP321_PCI_UPPER_IO_VA;
        res[0].name  = "IQ31244 PCI I/O Space";
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
index 802f6d091b75..d9758d3f6e7f 100644
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ b/arch/arm/mach-iop3xx/iq80321-pci.c
@@ -68,12 +68,10 @@ static int iq80321_setup(int nr, struct pci_sys_data *sys)
        if(nr != 0)
                return 0;
-        res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+        res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
        if (!res)
                panic("PCI: unable to alloc resources");
-        memset(res, 0, sizeof(struct resource) * 2);
        res[0].start = IOP321_PCI_LOWER_IO_VA;
        res[0].end   = IOP321_PCI_UPPER_IO_VA;
        res[0].name  = "IQ80321 PCI I/O Space";
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
index 654e450a1311..40d861002492 100644
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ b/arch/arm/mach-iop3xx/iq80331-pci.c
@@ -64,12 +64,10 @@ static int iq80331_setup(int nr, struct pci_sys_data *sys)
        if(nr != 0)
                return 0;
-        res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+        res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
        if (!res)
                panic("PCI: unable to alloc resources");
-        memset(res, 0, sizeof(struct resource) * 2);
        res[0].start = IOP331_PCI_LOWER_IO_VA;
        res[0].end   = IOP331_PCI_UPPER_IO_VA;
        res[0].name  = "IQ80331 PCI I/O Space";
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
index 65951ffe4631..afc0676318e4 100644
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ b/arch/arm/mach-iop3xx/iq80332-pci.c
@@ -70,12 +70,10 @@ static int iq80332_setup(int nr, struct pci_sys_data *sys)
        if(nr != 0)
                return 0;
-        res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+        res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
        if (!res)
                panic("PCI: unable to alloc resources");
-        memset(res, 0, sizeof(struct resource) * 2);
        res[0].start = IOP331_PCI_LOWER_IO_VA;
        res[0].end   = IOP331_PCI_UPPER_IO_VA;
        res[0].name  = "IQ80332 PCI I/O Space";
diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig
index ecb58d83478e..86f53f8ccbf5 100644
--- a/arch/arm/mach-ixp2000/Kconfig
+++ b/arch/arm/mach-ixp2000/Kconfig
@@ -43,12 +43,17 @@ config ARCH_IXDP2401
          this platform, see <file:Documentation/arm/IXP2000>.
 config ARCH_IXDP2801
-        bool "Support Intel IXDP2801"
+        bool "Support Intel IXDP2801 and IXDP28x5"
        help
          Say 'Y' here if you want your kernel to support the Intel
-          IXDP2801 reference platform. For more information on
+          IXDP2801/2805/2855 reference platforms. For more information on
          this platform, see <file:Documentation/arm/IXP2000>.
+config MACH_IXDP28X5
+        bool
+        depends on ARCH_IXDP2801
+        default y
 config ARCH_IXDP2X01
        bool
        depends on ARCH_IXDP2401 || ARCH_IXDP2801
diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile
index 9621aeb61f46..1e6139d42a92 100644
--- a/arch/arm/mach-ixp2000/Makefile
+++ b/arch/arm/mach-ixp2000/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y                   := core.o pci.o uengine.o
+obj-y                   := core.o pci.o
 obj-m                   :=
 obj-n                   :=
 obj-                    :=
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index cfd5bef3190b..6e8d504aca55 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -288,8 +288,6 @@ void gpio_line_config(int line, int direction)
        local_irq_save(flags);
        if (direction == GPIO_OUT) {
-                irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
                /* if it's an output, it ain't an interrupt anymore */
                GPIO_IRQ_falling_edge &= ~(1 << line);
                GPIO_IRQ_rising_edge &= ~(1 << line);
@@ -351,11 +349,6 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
                GPIO_IRQ_level_high &= ~(1 << line);
        update_gpio_int_csrs();
-        /*
-         * Finally, mark the corresponding IRQ as valid.
-         */
-        irq_desc[irq].valid = 1;
        return 0;
 }
@@ -506,14 +499,10 @@ void __init ixp2000_init_irq(void)
        }
        set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
-        /*
-         * GPIO IRQs are invalid until someone sets the interrupt mode
-         * by calling set_irq_type().
-         */
        for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
                set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
                set_irq_handler(irq, do_level_IRQ);
-                set_irq_flags(irq, 0);
+                set_irq_flags(irq, IRQF_VALID);
        }
        set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 150519fb38ec..f9d4968c1d66 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -284,7 +284,7 @@ static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
 {
        sys->mem_offset = 0xe0000000;
-        if (machine_is_ixdp2801())
+        if (machine_is_ixdp2801() || machine_is_ixdp28x5())
                sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
        return ixp2000_pci_setup(nr, sys);
@@ -300,7 +300,8 @@ struct hw_pci ixdp2x01_pci __initdata = {
 int __init ixdp2x01_pci_init(void)
 {
-        if (machine_is_ixdp2401() || machine_is_ixdp2801())
+        if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
+                machine_is_ixdp28x5())
                pci_common_init(&ixdp2x01_pci);
        return 0;
@@ -400,6 +401,21 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
        .timer          = &ixdp2x01_timer,
        .init_machine   = ixdp2x01_init_machine,
 MACHINE_END
+/*
+ * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
+ * changed the machine ID in the bootloader
+ */
+MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
+        /* Maintainer: MontaVista Software, Inc. */
+        .phys_io        = IXP2000_UART_PHYS_BASE,
+        .io_pg_offst    = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .map_io         = ixdp2x01_map_io,
+        .init_irq       = ixdp2x01_init_irq,
+        .timer          = &ixdp2x01_timer,
+        .init_machine   = ixdp2x01_init_machine,
+MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 6e3462ed5306..2d40fe1145f0 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -463,7 +463,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
        if (nr >= 1)
                return 0;
-        res = kmalloc(sizeof(*res) * 2, GFP_KERNEL);
+        res = kzalloc(sizeof(*res) * 2, GFP_KERNEL);
        if (res == NULL) {
                /* 
                 * If we're out of memory this early, something is wrong,
@@ -471,7 +471,6 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
                 */
                panic("PCI: unable to allocate resources?\n");
        }
-        memset(res, 0, sizeof(*res) * 2);
        local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index fbadf3021b9e..a0888e160e3b 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -91,7 +91,7 @@ static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
 /*
 * IRQ -> GPIO mapping table
 */
-static int irq2gpio[32] = {
+static char irq2gpio[32] = {
        -1, -1, -1, -1, -1, -1,  0,  1,
        -1, -1, -1, -1, -1, -1, -1, -1,
        -1, -1, -1,  2,  3,  4,  5,  6,
@@ -153,6 +153,9 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
        /* Set the new style */
        *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+        /* Configure the line as an input */
+        gpio_line_config(line, IXP4XX_GPIO_IN);
        return 0;
 }
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index 578a52461fdb..ea8de7e3ab1b 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -12,5 +12,6 @@ extern struct sys_timer lh7a40x_timer;
 extern void lh7a400_init_irq (void);
 extern void lh7a404_init_irq (void);
+extern void lh7a40x_init_board_irq (void);
 #define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c
index 691bb09232a5..8535764d89ca 100644
--- a/arch/arm/mach-lh7a40x/irq-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c
@@ -16,6 +16,7 @@
 #include <asm/mach/hardware.h>
 #include <asm/mach/irqs.h>
+#include "common.h"
  /* KEV7a400 CPLD IRQ handling */
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index f334d81c2cd8..f9fdefef6d6f 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -16,9 +16,9 @@
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irq.h>
 #include <asm/arch/irqs.h>
+#include "common.h"
  /* CPU IRQ handling */
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 122fadabc97d..e902e3d87da4 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -16,9 +16,10 @@
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irq.h>
 #include <asm/arch/irqs.h>
+#include "common.h"
 #define USE_PRIORITIES
 /* See Documentation/arm/Sharp-LH/VectoredInterruptController for more
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 6262d449120c..dcb4e17b9419 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -19,6 +19,7 @@
 #include <asm/mach/irq.h>
 #include <asm/arch/irqs.h>
+#include "common.h"
 static void lh7a40x_ack_cpld_irq (u32 irq)
 {
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 32526a0a6f86..382644401a4d 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,7 +3,7 @@
 #
 # Common support (must be linked before board specific support)
-obj-y += generic.o irq.o dma.o time.o
+obj-y += clock.o generic.o irq.o dma.o time.o
 obj-$(CONFIG_PXA25x) += pxa25x.o
 obj-$(CONFIG_PXA27x) += pxa27x.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
new file mode 100644
index 000000000000..8f7c90a0593b
--- /dev/null
+++ b/arch/arm/mach-pxa/clock.c
@@ -0,0 +1,124 @@
+/*
+ *  linux/arch/arm/mach-sa1100/clock.c
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/hardware.h>
+#include <asm/semaphore.h>
+struct clk {
+        struct list_head        node;
+        unsigned long           rate;
+        struct module           *owner;
+        const char              *name;
+        unsigned int            enabled;
+        void                    (*enable)(void);
+        void                    (*disable)(void);
+};
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+static DEFINE_SPINLOCK(clocks_lock);
+struct clk *clk_get(struct device *dev, const char *id)
+{
+        struct clk *p, *clk = ERR_PTR(-ENOENT);
+        down(&clocks_sem);
+        list_for_each_entry(p, &clocks, node) {
+                if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+                        clk = p;
+                        break;
+                }
+        }
+        up(&clocks_sem);
+        return clk;
+}
+EXPORT_SYMBOL(clk_get);
+void clk_put(struct clk *clk)
+{
+        module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+int clk_enable(struct clk *clk)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (clk->enabled++ == 0)
+                clk->enable();
+        spin_unlock_irqrestore(&clocks_lock, flags);
+        return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+        WARN_ON(clk->enabled == 0);
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (--clk->enabled == 0)
+                clk->disable();
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+static void clk_gpio27_enable(void)
+{
+        pxa_gpio_mode(GPIO11_3_6MHz_MD);
+}
+static void clk_gpio27_disable(void)
+{
+}
+static struct clk clk_gpio27 = {
+        .name           = "GPIO27_CLK",
+        .rate           = 3686400,
+        .enable         = clk_gpio27_enable,
+        .disable        = clk_gpio27_disable,
+};
+int clk_register(struct clk *clk)
+{
+        down(&clocks_sem);
+        list_add(&clk->node, &clocks);
+        up(&clocks_sem);
+        return 0;
+}
+EXPORT_SYMBOL(clk_register);
+void clk_unregister(struct clk *clk)
+{
+        down(&clocks_sem);
+        list_del(&clk->node);
+        up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+static int __init clk_init(void)
+{
+        clk_register(&clk_gpio27);
+        return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 7ffd2de8f2f3..68923b1d2b62 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -32,7 +32,6 @@
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 911e6ff5a9bd..b45560a8f6c4 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -29,7 +29,6 @@
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c094d99ebf56..30ec317bbb97 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -33,7 +33,6 @@
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index d168286ed470..66ec71756d0f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,7 +34,6 @@
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
 #include <asm/arch/tosa.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 0b9d7ca49ec1..ed07c4149d82 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -9,6 +9,13 @@ config MACH_ANUBIS
          Say Y gere if you are using the Simtec Electronics ANUBIS
          development system
+config MACH_OSIRIS
+        bool "Simtec IM2440D20 (OSIRIS) module"
+        select CPU_S3C2440
+        help
+          Say Y here if you are using the Simtec IM2440D20 module, also
+          known as the Osiris.
 config ARCH_BAST
        bool "Simtec Electronics BAST (EB2410ITX)"
        select CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 1217bf00309c..1b3b476e5637 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
 # machine specific support
 obj-$(CONFIG_MACH_ANUBIS)       += mach-anubis.o
+obj-$(CONFIG_MACH_OSIRIS)       += mach-osiris.o
 obj-$(CONFIG_ARCH_BAST)         += mach-bast.o usb-simtec.o
 obj-$(CONFIG_ARCH_H1940)        += mach-h1940.o
 obj-$(CONFIG_MACH_N30)          += mach-n30.o
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 08489efdaf06..fec02c92f95f 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -38,12 +38,14 @@
 #include <linux/ioport.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
+#include <linux/delay.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
 #include "clock.h"
 #include "cpu.h"
@@ -51,7 +53,8 @@
 /* clock information */
 static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
+DEFINE_MUTEX(clocks_mutex);
 /* old functions */
@@ -178,12 +181,24 @@ unsigned long clk_get_rate(struct clk *clk)
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
+        if (!IS_ERR(clk) && clk->round_rate)
+                return (clk->round_rate)(clk, rate);
        return rate;
 }
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-        return -EINVAL;
+        int ret;
+        if (IS_ERR(clk))
+                return -EINVAL;
+        mutex_lock(&clocks_mutex);
+        ret = (clk->set_rate)(clk, rate);
+        mutex_unlock(&clocks_mutex);
+        return ret;
 }
 struct clk *clk_get_parent(struct clk *clk)
@@ -191,6 +206,23 @@ struct clk *clk_get_parent(struct clk *clk)
        return clk->parent;
 }
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        int ret = 0;
+        if (IS_ERR(clk))
+                return -EINVAL;
+        mutex_lock(&clocks_mutex);
+        if (clk->set_parent)
+                ret = (clk->set_parent)(clk, parent);
+        mutex_unlock(&clocks_mutex);
+        return ret;
+}
 EXPORT_SYMBOL(clk_get);
 EXPORT_SYMBOL(clk_put);
 EXPORT_SYMBOL(clk_enable);
@@ -199,6 +231,29 @@ EXPORT_SYMBOL(clk_get_rate);
 EXPORT_SYMBOL(clk_round_rate);
 EXPORT_SYMBOL(clk_set_rate);
 EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+/* base clock enable */
+static int s3c24xx_upll_enable(struct clk *clk, int enable)
+{
+        unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+        unsigned long orig = clkslow;
+        if (enable)
+                clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
+        else
+                clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
+        __raw_writel(clkslow, S3C2410_CLKSLOW);
+        /* if we started the UPLL, then allow to settle */
+        if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF))
+                udelay(200);
+        return 0;
+}
 /* base clocks */
@@ -210,6 +265,14 @@ static struct clk clk_xtal = {
        .ctrlbit        = 0,
 };
+static struct clk clk_upll = {
+        .name           = "upll",
+        .id             = -1,
+        .parent         = NULL,
+        .enable         = s3c24xx_upll_enable,
+        .ctrlbit        = 0,
+};
 static struct clk clk_f = {
        .name           = "fclk",
        .id             = -1,
@@ -234,26 +297,124 @@ static struct clk clk_p = {
        .ctrlbit        = 0,
 };
+struct clk clk_usb_bus = {
+        .name           = "usb-bus",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = &clk_upll,
+};
 /* clocks that could be registered by external code */
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+        unsigned long dclkcon = __raw_readl(S3C2410_DCLKCON);
+        if (enable)
+                dclkcon |= clk->ctrlbit;
+        else
+                dclkcon &= ~clk->ctrlbit;
+        __raw_writel(dclkcon, S3C2410_DCLKCON);
+        return 0;
+}
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+        unsigned long dclkcon;
+        unsigned int uclk;
+        if (parent == &clk_upll)
+                uclk = 1;
+        else if (parent == &clk_p)
+                uclk = 0;
+        else
+                return -EINVAL;
+        clk->parent = parent;
+        dclkcon = __raw_readl(S3C2410_DCLKCON);
+        if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+                if (uclk)
+                        dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+                else
+                        dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+        } else {
+                if (uclk)
+                        dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+                else
+                        dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+        }
+        __raw_writel(dclkcon, S3C2410_DCLKCON);
+        return 0;
+}
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+        unsigned long mask;
+        unsigned long source;
+        /* calculate the MISCCR setting for the clock */
+        if (parent == &clk_xtal)
+                source = S3C2410_MISCCR_CLK0_MPLL;
+        else if (parent == &clk_upll)
+                source = S3C2410_MISCCR_CLK0_UPLL;
+        else if (parent == &clk_f)
+                source = S3C2410_MISCCR_CLK0_FCLK;
+        else if (parent == &clk_p)
+                source = S3C2410_MISCCR_CLK0_PCLK;
+        else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+                source = S3C2410_MISCCR_CLK0_DCLK0;
+        else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+                source = S3C2410_MISCCR_CLK0_DCLK0;
+        else
+                return -EINVAL;
+        if (clk == &s3c24xx_dclk0)
+                mask = S3C2410_MISCCR_CLK0_MASK;
+        else {
+                source <<= 4;
+                mask = S3C2410_MISCCR_CLK1_MASK;
+        }
+        s3c2410_modify_misccr(mask, source);
+        return 0;
+}
+/* external clock definitions */
 struct clk s3c24xx_dclk0 = {
        .name           = "dclk0",
        .id             = -1,
+        .ctrlbit        = S3C2410_DCLKCON_DCLK0EN,
+        .enable         = s3c24xx_dclk_enable,
+        .set_parent     = s3c24xx_dclk_setparent,
 };
 struct clk s3c24xx_dclk1 = {
        .name           = "dclk1",
        .id             = -1,
+        .ctrlbit        = S3C2410_DCLKCON_DCLK0EN,
+        .enable         = s3c24xx_dclk_enable,
+        .set_parent     = s3c24xx_dclk_setparent,
 };
 struct clk s3c24xx_clkout0 = {
        .name           = "clkout0",
        .id             = -1,
+        .set_parent     = s3c24xx_clkout_setparent,
 };
 struct clk s3c24xx_clkout1 = {
        .name           = "clkout1",
        .id             = -1,
+        .set_parent     = s3c24xx_clkout_setparent,
 };
 struct clk s3c24xx_uclk = {
@@ -262,7 +423,7 @@ struct clk s3c24xx_uclk = {
 };
-/* clock definitions */
+/* standard clock definitions */
 static struct clk init_clocks[] = {
        {
@@ -374,7 +535,7 @@ int s3c24xx_register_clock(struct clk *clk)
        /* if this is a standard clock, set the usage state */
-        if (clk->ctrlbit) {
+        if (clk->ctrlbit && clk->enable == s3c24xx_clkcon_enable) {
                unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
                clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
@@ -396,6 +557,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
                                unsigned long hclk,
                                unsigned long pclk)
 {
+        unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
        unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
        struct clk *clkp = init_clocks;
        int ptr;
@@ -406,6 +568,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
        /* initialise the main system clocks */
        clk_xtal.rate = xtal;
+        clk_upll.rate = s3c2410_get_pll(upllcon, xtal);
        clk_h.rate = hclk;
        clk_p.rate = pclk;
@@ -439,6 +602,9 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
        if (s3c24xx_register_clock(&clk_xtal) < 0)
                printk(KERN_ERR "failed to register master xtal\n");
+        if (s3c24xx_register_clock(&clk_upll) < 0)
+                printk(KERN_ERR "failed to register upll clock\n");
        if (s3c24xx_register_clock(&clk_f) < 0)
                printk(KERN_ERR "failed to register cpu fclk\n");
@@ -448,6 +614,10 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
        if (s3c24xx_register_clock(&clk_p) < 0)
                printk(KERN_ERR "failed to register cpu pclk\n");
+        if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+                printk(KERN_ERR "failed to register usb bus clock\n");
        /* register clocks from clock array */
        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h
index eb5c95d1e7f2..01bb458bf8eb 100644
--- a/arch/arm/mach-s3c2410/clock.h
+++ b/arch/arm/mach-s3c2410/clock.h
@@ -19,7 +19,11 @@ struct clk {
        int                   usage;
        unsigned long         rate;
        unsigned long         ctrlbit;
        int                 (*enable)(struct clk *, int enable);
+        int                 (*set_rate)(struct clk *c, unsigned long rate);
+        unsigned long       (*round_rate)(struct clk *c, unsigned long rate);
+        int                 (*set_parent)(struct clk *c, struct clk *parent);
 };
 /* other clocks which may be registered by board support */
@@ -30,11 +34,15 @@ extern struct clk s3c24xx_clkout0;
 extern struct clk s3c24xx_clkout1;
 extern struct clk s3c24xx_uclk;
+extern struct clk clk_usb_bus;
 /* exports for arch/arm/mach-s3c2410
 *
 * Please DO NOT use these outside of arch/arm/mach-s3c2410
 */
+extern struct mutex clocks_mutex;
 extern int s3c24xx_clkcon_enable(struct clk *clk, int enable);
 extern int s3c24xx_register_clock(struct clk *clk);
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c
new file mode 100644
index 000000000000..ae0787557751
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-osiris.c
@@ -0,0 +1,294 @@
+/* linux/arch/arm/mach-s3c2410/mach-osiris.c
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/osiris-map.h>
+#include <asm/arch/osiris-cpld.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+/* onboard perihpheral map */
+static struct map_desc osiris_iodesc[] __initdata = {
+  /* ISA IO areas (may be over-written later) */
+  {
+          .virtual      = (u32)S3C24XX_VA_ISA_BYTE,
+          .pfn          = __phys_to_pfn(S3C2410_CS5),
+          .length       = SZ_16M,
+          .type         = MT_DEVICE,
+  }, {
+          .virtual      = (u32)S3C24XX_VA_ISA_WORD,
+          .pfn          = __phys_to_pfn(S3C2410_CS5),
+          .length       = SZ_16M,
+          .type         = MT_DEVICE,
+  },
+  /* CPLD control registers */
+  {
+          .virtual      = (u32)OSIRIS_VA_CTRL1,
+          .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL1),
+          .length       = SZ_16K,
+          .type         = MT_DEVICE
+  }, {
+          .virtual      = (u32)OSIRIS_VA_CTRL2,
+          .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL2),
+          .length       = SZ_16K,
+          .type         = MT_DEVICE
+  },
+};
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
+        [0] = {
+                .name           = "uclk",
+                .divisor        = 1,
+                .min_baud       = 0,
+                .max_baud       = 0,
+        },
+        [1] = {
+                .name           = "pclk",
+                .divisor        = 1,
+                .min_baud       = 0,
+                .max_baud       = 0.
+        }
+};
+static struct s3c2410_uartcfg osiris_uartcfgs[] = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+                .clocks      = osiris_serial_clocks,
+                .clocks_size = ARRAY_SIZE(osiris_serial_clocks)
+        },
+        [1] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+                .clocks      = osiris_serial_clocks,
+                .clocks_size = ARRAY_SIZE(osiris_serial_clocks)
+        },
+};
+/* NAND Flash on Osiris board */
+static int external_map[]   = { 2 };
+static int chip0_map[]      = { 0 };
+static int chip1_map[]      = { 1 };
+static struct mtd_partition osiris_default_nand_part[] = {
+        [0] = {
+                .name   = "Boot Agent",
+                .size   = SZ_16K,
+                .offset = 0
+        },
+        [1] = {
+                .name   = "/boot",
+                .size   = SZ_4M - SZ_16K,
+                .offset = SZ_16K,
+        },
+        [2] = {
+                .name   = "user1",
+                .offset = SZ_4M,
+                .size   = SZ_32M - SZ_4M,
+        },
+        [3] = {
+                .name   = "user2",
+                .offset = SZ_32M,
+                .size   = MTDPART_SIZ_FULL,
+        }
+};
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+static struct s3c2410_nand_set osiris_nand_sets[] = {
+        [1] = {
+                .name           = "External",
+                .nr_chips       = 1,
+                .nr_map         = external_map,
+                .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
+                .partitions     = osiris_default_nand_part
+        },
+        [0] = {
+                .name           = "chip0",
+                .nr_chips       = 1,
+                .nr_map         = chip0_map,
+                .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
+                .partitions     = osiris_default_nand_part
+        },
+        [2] = {
+                .name           = "chip1",
+                .nr_chips       = 1,
+                .nr_map         = chip1_map,
+                .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
+                .partitions     = osiris_default_nand_part
+        },
+};
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+        unsigned int tmp;
+        slot = set->nr_map[slot] & 3;
+        pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+                 slot, set, set->nr_map);
+        tmp = __raw_readb(OSIRIS_VA_CTRL1);
+        tmp &= ~OSIRIS_CTRL1_NANDSEL;
+        tmp |= slot;
+        pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
+        __raw_writeb(tmp, OSIRIS_VA_CTRL1);
+}
+static struct s3c2410_platform_nand osiris_nand_info = {
+        .tacls          = 25,
+        .twrph0         = 60,
+        .twrph1         = 60,
+        .nr_sets        = ARRAY_SIZE(osiris_nand_sets),
+        .sets           = osiris_nand_sets,
+        .select_chip    = osiris_nand_select,
+};
+/* PCMCIA control and configuration */
+static struct resource osiris_pcmcia_resource[] = {
+        [0] = {
+                .start  = 0x0f000000,
+                .end    = 0x0f100000,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 0x0c000000,
+                .end    = 0x0c100000,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+static struct platform_device osiris_pcmcia = {
+        .name           = "osiris-pcmcia",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(osiris_pcmcia_resource),
+        .resource       = osiris_pcmcia_resource,
+};
+/* Standard Osiris devices */
+static struct platform_device *osiris_devices[] __initdata = {
+        &s3c_device_i2c,
+        &s3c_device_nand,
+        &osiris_pcmcia,
+};
+static struct clk *osiris_clocks[] = {
+        &s3c24xx_dclk0,
+        &s3c24xx_dclk1,
+        &s3c24xx_clkout0,
+        &s3c24xx_clkout1,
+        &s3c24xx_uclk,
+};
+static struct s3c24xx_board osiris_board __initdata = {
+        .devices       = osiris_devices,
+        .devices_count = ARRAY_SIZE(osiris_devices),
+        .clocks        = osiris_clocks,
+        .clocks_count  = ARRAY_SIZE(osiris_clocks)
+};
+static void __init osiris_map_io(void)
+{
+        unsigned long flags;
+        /* initialise the clocks */
+        s3c24xx_dclk0.parent = NULL;
+        s3c24xx_dclk0.rate   = 12*1000*1000;
+        s3c24xx_dclk1.parent = NULL;
+        s3c24xx_dclk1.rate   = 24*1000*1000;
+        s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
+        s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
+        s3c24xx_uclk.parent  = &s3c24xx_clkout1;
+        s3c_device_nand.dev.platform_data = &osiris_nand_info;
+        s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+        s3c24xx_init_clocks(0);
+        s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+        s3c24xx_set_board(&osiris_board);
+        /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+        local_irq_save(flags);
+        __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+        local_irq_restore(flags);
+        /* write-protect line to the NAND */
+        s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+        /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+        .phys_io        = S3C2410_PA_UART,
+        .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S3C2410_SDRAM_PA + 0x100,
+        .map_io         = osiris_map_io,
+        .init_irq       = s3c24xx_init_irq,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
index b557a2be8a01..57a15974d4b5 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -31,6 +31,7 @@
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/mutex.h>
 #include <linux/clk.h>
 #include <asm/hardware.h>
@@ -45,10 +46,47 @@
 /* S3C2440 extended clock support */
-static struct clk s3c2440_clk_upll = {
+static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-        .name           = "upll",
+                                              unsigned long rate)
-        .id             = -1,
+{
-};
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        int div;
+        if (rate > parent_rate)
+                return parent_rate;
+        /* note, we remove the +/- 1 calculations for the divisor */
+        div = (parent_rate / rate) / 2;
+        if (div < 1)
+                div = 1;
+        else if (div > 16)
+                div = 16;
+        return parent_rate / (div * 2);
+}
+static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
+        rate = s3c2440_camif_upll_round(clk, rate);
+        camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
+        if (rate != parent_rate) {
+                camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+                camdivn |= (((parent_rate / rate) / 2) - 1);
+        }
+        __raw_writel(camdivn, S3C2440_CAMDIVN);
+        return 0;
+}
+/* Extra S3C2440 clocks */
 static struct clk s3c2440_clk_cam = {
        .name           = "camif",
@@ -57,6 +95,13 @@ static struct clk s3c2440_clk_cam = {
        .ctrlbit        = S3C2440_CLKCON_CAMERA,
 };
+static struct clk s3c2440_clk_cam_upll = {
+        .name           = "camif-upll",
+        .id             = -1,
+        .set_rate       = s3c2440_camif_upll_setrate,
+        .round_rate     = s3c2440_camif_upll_round,
+};
 static struct clk s3c2440_clk_ac97 = {
        .name           = "ac97",
        .id             = -1,
@@ -66,38 +111,46 @@ static struct clk s3c2440_clk_ac97 = {
 static int s3c2440_clk_add(struct sys_device *sysdev)
 {
-        unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
        unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+        unsigned long clkdivn;
        struct clk *clk_h;
        struct clk *clk_p;
-        struct clk *clk_xtal;
+        struct clk *clk_upll;
-        clk_xtal = clk_get(NULL, "xtal");
-        if (IS_ERR(clk_xtal)) {
-                printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n");
-                return -EINVAL;
-        }
-        s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
-        printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n",
+        printk("S3C2440: Clock Support, DVS %s\n",
-               print_mhz(s3c2440_clk_upll.rate),
               (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
        clk_p = clk_get(NULL, "pclk");
        clk_h = clk_get(NULL, "hclk");
+        clk_upll = clk_get(NULL, "upll");
-        if (IS_ERR(clk_p) || IS_ERR(clk_h)) {
+        if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
                printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
                return -EINVAL;
        }
+        /* check rate of UPLL, and if it is near 96MHz, then change
+         * to using half the UPLL rate for the system */
+        if (clk_get_rate(clk_upll) > (94 * MHZ)) {
+                clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+                mutex_lock(&clocks_mutex);
+                clkdivn = __raw_readl(S3C2410_CLKDIVN);
+                clkdivn |= S3C2440_CLKDIVN_UCLK;
+                __raw_writel(camdivn, S3C2410_CLKDIVN);
+                mutex_unlock(&clocks_mutex);
+        }
        s3c2440_clk_cam.parent = clk_h;
        s3c2440_clk_ac97.parent = clk_p;
+        s3c2440_clk_cam_upll.parent = clk_upll;
        s3c24xx_register_clock(&s3c2440_clk_ac97);
        s3c24xx_register_clock(&s3c2440_clk_cam);
-        s3c24xx_register_clock(&s3c2440_clk_upll);
+        s3c24xx_register_clock(&s3c2440_clk_cam_upll);
        clk_disable(&s3c2440_clk_ac97);
        clk_disable(&s3c2440_clk_cam);
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c
index 10a2976aefdd..9d7b799ea4a4 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/mach-s3c2410/time.c
@@ -142,6 +142,12 @@ static struct irqaction s3c2410_timer_irq = {
        .handler        = s3c2410_timer_interrupt,
 };
+#define use_tclk1_12() ( \
+        machine_is_bast()       || \
+        machine_is_vr1000()     || \
+        machine_is_anubis()     || \
+        machine_is_osiris() )
 /*
 * Set up timer interrupt, and return the current time in seconds.
 *
@@ -165,7 +171,7 @@ static void s3c2410_timer_setup (void)
        /* configure the system for whichever machine is in use */
-        if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) {
+        if (use_tclk1_12()) {
                /* timer is at 12MHz, scaler is 1 */
                timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
                tcnt = 12000000 / HZ;
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index e4a4a3e8aa8f..e27f15042a22 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
 #
 # Common support
-obj-y := generic.o irq.o dma.o time.o
+obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
new file mode 100644
index 000000000000..b1e8fd766c1a
--- /dev/null
+++ b/arch/arm/mach-sa1100/clock.c
@@ -0,0 +1,132 @@
+/*
+ *  linux/arch/arm/mach-sa1100/clock.c
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <asm/hardware.h>
+#include <asm/semaphore.h>
+struct clk {
+        struct list_head        node;
+        unsigned long           rate;
+        struct module           *owner;
+        const char              *name;
+        unsigned int            enabled;
+        void                    (*enable)(void);
+        void                    (*disable)(void);
+};
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+static DEFINE_SPINLOCK(clocks_lock);
+struct clk *clk_get(struct device *dev, const char *id)
+{
+        struct clk *p, *clk = ERR_PTR(-ENOENT);
+        down(&clocks_sem);
+        list_for_each_entry(p, &clocks, node) {
+                if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+                        clk = p;
+                        break;
+                }
+        }
+        up(&clocks_sem);
+        return clk;
+}
+EXPORT_SYMBOL(clk_get);
+void clk_put(struct clk *clk)
+{
+        module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+int clk_enable(struct clk *clk)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (clk->enabled++ == 0)
+                clk->enable();
+        spin_unlock_irqrestore(&clocks_lock, flags);
+        return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+        WARN_ON(clk->enabled == 0);
+        spin_lock_irqsave(&clocks_lock, flags);
+        if (--clk->enabled == 0)
+                clk->disable();
+        spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+static void clk_gpio27_enable(void)
+{
+        /*
+         * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
+         * (SA-1110 Developer's Manual, section 9.1.2.1)
+         */
+        GAFR |= GPIO_32_768kHz;
+        GPDR |= GPIO_32_768kHz;
+        TUCR = TUCR_3_6864MHz;
+}
+static void clk_gpio27_disable(void)
+{
+        TUCR = 0;
+        GPDR &= ~GPIO_32_768kHz;
+        GAFR &= ~GPIO_32_768kHz;
+}
+static struct clk clk_gpio27 = {
+        .name           = "GPIO27_CLK",
+        .rate           = 3686400,
+        .enable         = clk_gpio27_enable,
+        .disable        = clk_gpio27_disable,
+};
+int clk_register(struct clk *clk)
+{
+        down(&clocks_sem);
+        list_add(&clk->node, &clocks);
+        up(&clocks_sem);
+        return 0;
+}
+EXPORT_SYMBOL(clk_register);
+void clk_unregister(struct clk *clk)
+{
+        down(&clocks_sem);
+        list_del(&clk->node);
+        up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+static int __init clk_init(void)
+{
+        clk_register(&clk_gpio27);
+        return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 9ebbe808b41d..799697d32dec 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -112,7 +112,7 @@ void __init versatile_init_irq(void)
 {
        unsigned int i;
-        vic_init(VA_VIC_BASE, ~(1 << 31));
+        vic_init(VA_VIC_BASE, IRQ_VIC_START, ~(1 << 31));
        set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
        enable_irq(IRQ_VICSOURCE31);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 3b79d0e23455..eaaec90db972 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -62,7 +62,7 @@ config CPU_ARM720T
 # ARM920T
 config CPU_ARM920T
        bool "Support ARM920T processor" if !ARCH_S3C2410
-        depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
+        depends on ARCH_EP93XX || ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
        default y if ARCH_S3C2410 || ARCH_AT91RM9200
        select CPU_32v4
        select CPU_ABRT_EV4T
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b0321e943b76..88279124317a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -19,7 +19,6 @@
 #include <linux/initrd.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
 #include <asm/setup.h>
 #include <asm/tlb.h>
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index da9b35974118..25e0ca3e598c 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,7 +26,6 @@
 #include <linux/vmalloc.h>
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 82ec954e45b6..3aa80094012c 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -32,7 +32,6 @@
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
-#include <asm/hardware.h>
 /*
 * This is the maximum size of an area which will be invalidated
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 7375fe930f72..767d158f211a 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -32,7 +32,6 @@
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
-#include <asm/hardware.h>
 /*
 * This is the maximum size of an area which will be invalidated
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index a13e0184d343..471286fdf78f 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -37,7 +37,6 @@
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
-#include <asm/hardware.h>
 /*
 * Function: arm720_proc_init (void)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index d16513899999..950d3b664c1e 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -30,7 +30,6 @@
 #include <asm/assembler.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
-#include <asm/hardware.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 23b8ed97f4e3..410b032faa3b 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -31,7 +31,6 @@
 #include <asm/assembler.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
-#include <asm/hardware.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index ee95c52db513..6dd2be7cd050 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -53,7 +53,6 @@
 #include <asm/assembler.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
-#include <asm/hardware.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 7d042dc20c47..022e86842041 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -30,7 +30,6 @@
 #include <asm/assembler.h>
 #include <asm/pgtable.h>
 #include <asm/procinfo.h>
-#include <asm/hardware.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include "proc-macros.S"
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2d3823ec3153..b50f87a0ee76 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/procinfo.h>
-#include <asm/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 6f8bc1f0e6a1..6f833358cd06 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,17 +10,18 @@
 #include <linux/init.h>
 #include <linux/oprofile.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 #include <linux/sysdev.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 #include "op_counter.h"
 #include "op_arm_model.h"
 static struct op_arm_model_spec *op_arm_model;
 static int op_arm_enabled;
-static struct semaphore op_arm_sem;
+static DEFINE_MUTEX(op_arm_mutex);
-struct op_counter_config counter_config[OP_MAX_COUNTER];
+struct op_counter_config *counter_config;
 static int op_arm_create_files(struct super_block *sb, struct dentry *root)
 {
@@ -28,7 +29,7 @@ static int op_arm_create_files(struct super_block *sb, struct dentry *root)
        for (i = 0; i < op_arm_model->num_counters; i++) {
                struct dentry *dir;
-                char buf[2];
+                char buf[4];
                snprintf(buf, sizeof buf, "%d", i);
                dir = oprofilefs_mkdir(sb, root, buf);
@@ -57,40 +58,40 @@ static int op_arm_start(void)
 {
        int ret = -EBUSY;
-        down(&op_arm_sem);
+        mutex_lock(&op_arm_mutex);
        if (!op_arm_enabled) {
                ret = op_arm_model->start();
                op_arm_enabled = !ret;
        }
-        up(&op_arm_sem);
+        mutex_unlock(&op_arm_mutex);
        return ret;
 }
 static void op_arm_stop(void)
 {
-        down(&op_arm_sem);
+        mutex_lock(&op_arm_mutex);
        if (op_arm_enabled)
                op_arm_model->stop();
        op_arm_enabled = 0;
-        up(&op_arm_sem);
+        mutex_unlock(&op_arm_mutex);
 }
 #ifdef CONFIG_PM
 static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
 {
-        down(&op_arm_sem);
+        mutex_lock(&op_arm_mutex);
        if (op_arm_enabled)
                op_arm_model->stop();
-        up(&op_arm_sem);
+        mutex_unlock(&op_arm_mutex);
        return 0;
 }
 static int op_arm_resume(struct sys_device *dev)
 {
-        down(&op_arm_sem);
+        mutex_lock(&op_arm_mutex);
        if (op_arm_enabled && op_arm_model->start())
                op_arm_enabled = 0;
-        up(&op_arm_sem);
+        mutex_unlock(&op_arm_mutex);
        return 0;
 }
@@ -135,12 +136,15 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 #endif
        if (spec) {
-                init_MUTEX(&op_arm_sem);
                ret = spec->init();
                if (ret < 0)
                        return ret;
+                counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config),
+                                         GFP_KERNEL);
+                if (!counter_config)
+                        return -ENOMEM;
                op_arm_model = spec;
                init_driverfs();
                ops->create_files = op_arm_create_files;
@@ -162,5 +166,5 @@ void oprofile_arch_exit(void)
                exit_driverfs();
                op_arm_model = NULL;
        }
+        kfree(counter_config);
 }
diff --git a/arch/arm/oprofile/op_counter.h b/arch/arm/oprofile/op_counter.h
index 153c1d467f24..8c5351d751cf 100644
--- a/arch/arm/oprofile/op_counter.h
+++ b/arch/arm/oprofile/op_counter.h
@@ -24,6 +24,6 @@ struct op_counter_config {
        unsigned long user;
 };
-extern struct op_counter_config counter_config[];
+extern struct op_counter_config *counter_config;
 #endif /* OP_COUNTER_H */
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 6f17187ab32a..9ab1abfbe7ad 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -22,6 +22,7 @@
        .globl  do_vfp
 do_vfp:
+        enable_irq
        ldr     r4, .LCvfp
        add     r10, r10, #TI_VFPSTATE  @ r10 = workspace
        ldr     pc, [r4]                @ call VFP entry point
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index d82651a97bae..6f7dce8eba51 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -16,7 +16,7 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/moduleparam.h>
-#include <asm/arch/uengine.h>
+#include <asm/hardware/uengine.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include "ixpdev.h"
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 09f03f493bea..77f104a005f3 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -16,7 +16,7 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/moduleparam.h>
-#include <asm/arch/uengine.h>
+#include <asm/hardware/uengine.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include "ixp2400_rx.ucode"
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 10845253c9e0..d121644646b9 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -31,14 +31,8 @@ enum parport_pc_pci_cards {
        netmos_9xx5_combo,
        netmos_9855,
        avlab_1s1p,
-        avlab_1s1p_650,
-        avlab_1s1p_850,
        avlab_1s2p,
-        avlab_1s2p_650,
-        avlab_1s2p_850,
        avlab_2s1p,
-        avlab_2s1p_650,
-        avlab_2s1p_850,
        siig_1s1p_10x,
        siig_2s1p_10x,
        siig_2p1s_20x,
@@ -85,14 +79,8 @@ static struct parport_pc_pci cards[] __devinitdata = {
        /* netmos_9xx5_combo */         { 1, { { 2, -1 }, }, netmos_parallel_init },
        /* netmos_9855 */               { 1, { { 0, -1 }, }, netmos_parallel_init },
        /* avlab_1s1p     */            { 1, { { 1, 2}, } },
-        /* avlab_1s1p_650 */            { 1, { { 1, 2}, } },
-        /* avlab_1s1p_850 */            { 1, { { 1, 2}, } },
        /* avlab_1s2p     */            { 2, { { 1, 2}, { 3, 4 },} },
-        /* avlab_1s2p_650 */            { 2, { { 1, 2}, { 3, 4 },} },
-        /* avlab_1s2p_850 */            { 2, { { 1, 2}, { 3, 4 },} },
        /* avlab_2s1p     */            { 1, { { 2, 3}, } },
-        /* avlab_2s1p_650 */            { 1, { { 2, 3}, } },
-        /* avlab_2s1p_850 */            { 1, { { 2, 3}, } },
        /* siig_1s1p_10x */             { 1, { { 3, 4 }, } },
        /* siig_2s1p_10x */             { 1, { { 4, 5 }, } },
        /* siig_2p1s_20x */             { 2, { { 1, 2 }, { 3, 4 }, } },
@@ -119,15 +107,24 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
        { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
          PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
        /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
-        { 0x14db, 0x2110, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p},
+        { PCI_VENDOR_ID_AFAVLAB, 0x2110,
-        { 0x14db, 0x2111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_650},
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
-        { 0x14db, 0x2112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p_850},
+        { PCI_VENDOR_ID_AFAVLAB, 0x2111,
-        { 0x14db, 0x2140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p},
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
-        { 0x14db, 0x2141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_650},
+        { PCI_VENDOR_ID_AFAVLAB, 0x2112,
-        { 0x14db, 0x2142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p_850},
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
-        { 0x14db, 0x2160, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p},
+        { PCI_VENDOR_ID_AFAVLAB, 0x2140,
-        { 0x14db, 0x2161, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_650},
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
-        { 0x14db, 0x2162, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p_850},
+        { PCI_VENDOR_ID_AFAVLAB, 0x2141,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
+        { PCI_VENDOR_ID_AFAVLAB, 0x2142,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
+        { PCI_VENDOR_ID_AFAVLAB, 0x2160,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
+        { PCI_VENDOR_ID_AFAVLAB, 0x2161,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
+        { PCI_VENDOR_ID_AFAVLAB, 0x2162,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
        { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
          PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
        { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
@@ -201,54 +198,18 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
                .base_baud      = 115200,
                .uart_offset    = 8,
        },
-        [avlab_1s1p_650] = { /* nt */
-                .flags          = FL_BASE0 | FL_BASE_BARS,
-                .num_ports      = 1,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
-        [avlab_1s1p_850] = { /* nt */
-                .flags          = FL_BASE0 | FL_BASE_BARS,
-                .num_ports      = 1,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
        [avlab_1s2p] = { /* n/t */
                .flags          = FL_BASE0 | FL_BASE_BARS,
                .num_ports      = 1,
                .base_baud      = 115200,
                .uart_offset    = 8,
        },
-        [avlab_1s2p_650] = { /* nt */
-                .flags          = FL_BASE0 | FL_BASE_BARS,
-                .num_ports      = 1,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
-        [avlab_1s2p_850] = { /* nt */
-                .flags          = FL_BASE0 | FL_BASE_BARS,
-                .num_ports      = 1,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
        [avlab_2s1p] = { /* n/t */
                .flags          = FL_BASE0 | FL_BASE_BARS,
                .num_ports      = 2,
                .base_baud      = 115200,
                .uart_offset    = 8,
        },
-        [avlab_2s1p_650] = { /* nt */
-                .flags          = FL_BASE0 | FL_BASE_BARS,
-                .num_ports      = 2,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
-        [avlab_2s1p_850] = { /* nt */
-                .flags          = FL_BASE0 | FL_BASE_BARS,
-                .num_ports      = 2,
-                .base_baud      = 115200,
-                .uart_offset    = 8,
-        },
        [siig_1s1p_10x] = {
                .flags          = FL_BASE2,
                .num_ports      = 1,
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 5c94a5d4efc0..4035920ce3d8 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -595,10 +595,10 @@ config SCSI_SATA_VIA
          If unsure, say N.
 config SCSI_SATA_VITESSE
-        tristate "VITESSE VSC-7174 SATA support"
+        tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
        depends on SCSI_SATA && PCI
        help
-          This option enables support for Vitesse VSC7174 Serial ATA.
+          This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
          If unsure, say N.
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index a1ddbba2cbdf..ffba65656a83 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -513,6 +513,138 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts)
        pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
 }
+static int ahci_poll_register(void __iomem *reg, u32 mask, u32 val,
+                              unsigned long interval_msec,
+                              unsigned long timeout_msec)
+{
+        unsigned long timeout;
+        u32 tmp;
+        timeout = jiffies + (timeout_msec * HZ) / 1000;
+        do {
+                tmp = readl(reg);
+                if ((tmp & mask) == val)
+                        return 0;
+                msleep(interval_msec);
+        } while (time_before(jiffies, timeout));
+        return -1;
+}
+static int ahci_softreset(struct ata_port *ap, int verbose, unsigned int *class)
+{
+        struct ahci_host_priv *hpriv = ap->host_set->private_data;
+        struct ahci_port_priv *pp = ap->private_data;
+        void __iomem *mmio = ap->host_set->mmio_base;
+        void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+        const u32 cmd_fis_len = 5; /* five dwords */
+        const char *reason = NULL;
+        struct ata_taskfile tf;
+        u8 *fis;
+        int rc;
+        DPRINTK("ENTER\n");
+        /* prepare for SRST (AHCI-1.1 10.4.1) */
+        rc = ahci_stop_engine(ap);
+        if (rc) {
+                reason = "failed to stop engine";
+                goto fail_restart;
+        }
+        /* check BUSY/DRQ, perform Command List Override if necessary */
+        ahci_tf_read(ap, &tf);
+        if (tf.command & (ATA_BUSY | ATA_DRQ)) {
+                u32 tmp;
+                if (!(hpriv->cap & HOST_CAP_CLO)) {
+                        rc = -EIO;
+                        reason = "port busy but no CLO";
+                        goto fail_restart;
+                }
+                tmp = readl(port_mmio + PORT_CMD);
+                tmp |= PORT_CMD_CLO;
+                writel(tmp, port_mmio + PORT_CMD);
+                readl(port_mmio + PORT_CMD); /* flush */
+                if (ahci_poll_register(port_mmio + PORT_CMD, PORT_CMD_CLO, 0x0,
+                                       1, 500)) {
+                        rc = -EIO;
+                        reason = "CLO failed";
+                        goto fail_restart;
+                }
+        }
+        /* restart engine */
+        ahci_start_engine(ap);
+        ata_tf_init(ap, &tf, 0);
+        fis = pp->cmd_tbl;
+        /* issue the first D2H Register FIS */
+        ahci_fill_cmd_slot(pp, cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY);
+        tf.ctl |= ATA_SRST;
+        ata_tf_to_fis(&tf, fis, 0);
+        fis[1] &= ~(1 << 7);    /* turn off Command FIS bit */
+        writel(1, port_mmio + PORT_CMD_ISSUE);
+        readl(port_mmio + PORT_CMD_ISSUE);      /* flush */
+        if (ahci_poll_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x0, 1, 500)) {
+                rc = -EIO;
+                reason = "1st FIS failed";
+                goto fail;
+        }
+        /* spec says at least 5us, but be generous and sleep for 1ms */
+        msleep(1);
+        /* issue the second D2H Register FIS */
+        ahci_fill_cmd_slot(pp, cmd_fis_len);
+        tf.ctl &= ~ATA_SRST;
+        ata_tf_to_fis(&tf, fis, 0);
+        fis[1] &= ~(1 << 7);    /* turn off Command FIS bit */
+        writel(1, port_mmio + PORT_CMD_ISSUE);
+        readl(port_mmio + PORT_CMD_ISSUE);      /* flush */
+        /* spec mandates ">= 2ms" before checking status.
+         * We wait 150ms, because that was the magic delay used for
+         * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+         * between when the ATA command register is written, and then
+         * status is checked.  Because waiting for "a while" before
+         * checking status is fine, post SRST, we perform this magic
+         * delay here as well.
+         */
+        msleep(150);
+        *class = ATA_DEV_NONE;
+        if (sata_dev_present(ap)) {
+                if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
+                        rc = -EIO;
+                        reason = "device not ready";
+                        goto fail;
+                }
+                *class = ahci_dev_classify(ap);
+        }
+        DPRINTK("EXIT, class=%u\n", *class);
+        return 0;
+ fail_restart:
+        ahci_start_engine(ap);
+ fail:
+        if (verbose)
+                printk(KERN_ERR "ata%u: softreset failed (%s)\n",
+                       ap->id, reason);
+        else
+                DPRINTK("EXIT, rc=%d reason=\"%s\"\n", rc, reason);
+        return rc;
+}
 static int ahci_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
 {
        int rc;
@@ -553,7 +685,8 @@ static void ahci_postreset(struct ata_port *ap, unsigned int *class)
 static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes)
 {
-        return ata_drive_probe_reset(ap, NULL, NULL, ahci_hardreset,
+        return ata_drive_probe_reset(ap, ata_std_probeinit,
+                                     ahci_softreset, ahci_hardreset,
                                     ahci_postreset, classes);
 }
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index a93336adcd23..96b4d2160df8 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -214,6 +214,8 @@ static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile
 *      Issues MMIO write to ATA command register, with proper
 *      synchronization with interrupt handler / other threads.
 *
+ *      FIXME: missing write posting for 400nS delay enforcement
+ *
 *      LOCKING:
 *      spin_lock_irqsave(host_set lock)
 */
@@ -648,6 +650,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
                goto err_out_regions;
        }
+        /* FIXME: If we get no DMA mask we should fall back to PIO */
        rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
        if (rc)
                goto err_out_regions;
@@ -699,5 +702,41 @@ err_out:
        return rc;
 }
+/**
+ *      ata_pci_clear_simplex   -       attempt to kick device out of simplex
+ *      @pdev: PCI device
+ *
+ *      Some PCI ATA devices report simplex mode but in fact can be told to
+ *      enter non simplex mode. This implements the neccessary logic to 
+ *      perform the task on such devices. Calling it on other devices will
+ *      have -undefined- behaviour.
+ */
+int ata_pci_clear_simplex(struct pci_dev *pdev)
+{
+        unsigned long bmdma = pci_resource_start(pdev, 4);
+        u8 simplex;
+        if (bmdma == 0)
+                return -ENOENT;
+        simplex = inb(bmdma + 0x02);
+        outb(simplex & 0x60, bmdma + 0x02);
+        simplex = inb(bmdma + 0x02);
+        if (simplex & 0x80)
+                return -EOPNOTSUPP;
+        return 0;
+}
+unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask)
+{
+        /* Filter out DMA modes if the device has been configured by
+           the BIOS as PIO only */
+           
+        if (ap->ioaddr.bmdma_addr == 0)
+                xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+        return xfer_mask;
+}
 #endif /* CONFIG_PCI */
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 64dce00e9c46..0314abd97f2d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -962,6 +962,8 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
        spin_unlock_irqrestore(&ap->host_set->lock, flags);
        if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) {
+                ata_port_flush_task(ap);
                spin_lock_irqsave(&ap->host_set->lock, flags);
                /* We're racing with irq here.  If we lose, the
@@ -1219,13 +1221,6 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
         * common ATA, ATAPI feature tests
         */
-        /* we require DMA support (bits 8 of word 49) */
-        if (!ata_id_has_dma(id)) {
-                printk(KERN_DEBUG "ata%u: no dma\n", ap->id);
-                rc = -EINVAL;
-                goto err_out_nosup;
-        }
        /* find max transfer mode; for printk only */
        xfer_mask = ata_id_xfermask(id);
@@ -1737,7 +1732,7 @@ static int ata_host_set_pio(struct ata_port *ap)
                        continue;
                if (!dev->pio_mode) {
-                        printk(KERN_WARNING "ata%u: no PIO support\n", ap->id);
+                        printk(KERN_WARNING "ata%u: no PIO support for device %d.\n", ap->id, i);
                        return -1;
                }
@@ -1999,9 +1994,19 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
         * status is checked.  Because waiting for "a while" before
         * checking status is fine, post SRST, we perform this magic
         * delay here as well.
+         *
+         * Old drivers/ide uses the 2mS rule and then waits for ready
         */
        msleep(150);
+        
+        /* Before we perform post reset processing we want to see if 
+           the bus shows 0xFF because the odd clown forgets the D7 pulldown
+           resistor */
+        
+        if (ata_check_status(ap) == 0xFF)
+                return 1;       /* Positive is failure for some reason */
        ata_bus_post_reset(ap, devmask);
        return 0;
@@ -2551,48 +2556,72 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev,
 }
 static const char * const ata_dma_blacklist [] = {
-        "WDC AC11000H",
+        "WDC AC11000H", NULL,
-        "WDC AC22100H",
+        "WDC AC22100H", NULL,
-        "WDC AC32500H",
+        "WDC AC32500H", NULL,
-        "WDC AC33100H",
+        "WDC AC33100H", NULL,
-        "WDC AC31600H",
+        "WDC AC31600H", NULL,
-        "WDC AC32100H",
+        "WDC AC32100H", "24.09P07",
-        "WDC AC23200L",
+        "WDC AC23200L", "21.10N21",
-        "Compaq CRD-8241B",
+        "Compaq CRD-8241B",  NULL,
-        "CRD-8400B",
+        "CRD-8400B", NULL,
-        "CRD-8480B",
+        "CRD-8480B", NULL,
-        "CRD-8482B",
+        "CRD-8482B", NULL,
-        "CRD-84",
+        "CRD-84", NULL,
-        "SanDisk SDP3B",
+        "SanDisk SDP3B", NULL,
-        "SanDisk SDP3B-64",
+        "SanDisk SDP3B-64", NULL,
-        "SANYO CD-ROM CRD",
+        "SANYO CD-ROM CRD", NULL,
-        "HITACHI CDR-8",
+        "HITACHI CDR-8", NULL,
-        "HITACHI CDR-8335",
+        "HITACHI CDR-8335", NULL, 
-        "HITACHI CDR-8435",
+        "HITACHI CDR-8435", NULL,
-        "Toshiba CD-ROM XM-6202B",
+        "Toshiba CD-ROM XM-6202B", NULL, 
-        "TOSHIBA CD-ROM XM-1702BC",
+        "TOSHIBA CD-ROM XM-1702BC", NULL, 
-        "CD-532E-A",
+        "CD-532E-A", NULL, 
-        "E-IDE CD-ROM CR-840",
+        "E-IDE CD-ROM CR-840", NULL, 
-        "CD-ROM Drive/F5A",
+        "CD-ROM Drive/F5A", NULL, 
-        "WPI CDD-820",
+        "WPI CDD-820", NULL, 
-        "SAMSUNG CD-ROM SC-148C",
+        "SAMSUNG CD-ROM SC-148C", NULL,
-        "SAMSUNG CD-ROM SC",
+        "SAMSUNG CD-ROM SC", NULL, 
-        "SanDisk SDP3B-64",
+        "SanDisk SDP3B-64", NULL,
-        "ATAPI CD-ROM DRIVE 40X MAXIMUM",
+        "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,
-        "_NEC DV5800A",
+        "_NEC DV5800A", NULL,
+        "SAMSUNG CD-ROM SN-124", "N001"
 };
+ 
+static int ata_strim(char *s, size_t len)
+{
+        len = strnlen(s, len);
+        /* ATAPI specifies that empty space is blank-filled; remove blanks */
+        while ((len > 0) && (s[len - 1] == ' ')) {
+                len--;
+                s[len] = 0;
+        }
+        return len;
+}
 static int ata_dma_blacklisted(const struct ata_device *dev)
 {
-        unsigned char model_num[41];
+        unsigned char model_num[40];
+        unsigned char model_rev[16];
+        unsigned int nlen, rlen;
        int i;
-        ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
+        ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
+                          sizeof(model_num));
-        for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++)
+        ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS,
-                if (!strcmp(ata_dma_blacklist[i], model_num))
+                          sizeof(model_rev));
-                        return 1;
+        nlen = ata_strim(model_num, sizeof(model_num));
+        rlen = ata_strim(model_rev, sizeof(model_rev));
+        for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) {
+                if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) {
+                        if (ata_dma_blacklist[i+1] == NULL)
+                                return 1;
+                        if (!strncmp(ata_dma_blacklist[i], model_rev, rlen))
+                                return 1;
+                }
+        }
        return 0;
 }
@@ -2863,6 +2892,8 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
        ata_fill_sg(qc);
 }
+void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
 /**
 *      ata_sg_init_one - Associate command with memory buffer
 *      @qc: Command to be associated
@@ -3907,7 +3938,6 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
        case ATA_PROT_ATAPI:
        case ATA_PROT_PIO:
-        case ATA_PROT_PIO_MULT:
                if (ap->flags & ATA_FLAG_PIO_DMA)
                        return 1;
@@ -4199,14 +4229,17 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc)
 void ata_bmdma_irq_clear(struct ata_port *ap)
 {
-    if (ap->flags & ATA_FLAG_MMIO) {
+        if (!ap->ioaddr.bmdma_addr)
-        void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
+                return;
-        writeb(readb(mmio), mmio);
-    } else {
-        unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
-        outb(inb(addr), addr);
-    }
+        if (ap->flags & ATA_FLAG_MMIO) {
+                void __iomem *mmio =
+                      ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
+                writeb(readb(mmio), mmio);
+        } else {
+                unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
+                outb(inb(addr), addr);
+        }
 }
@@ -4337,9 +4370,9 @@ idle_irq:
 #ifdef ATA_IRQ_TRAP
        if ((ap->stats.idle_irq % 1000) == 0) {
-                handled = 1;
                ata_irq_ack(ap, 0); /* debug trap */
                printk(KERN_WARNING "ata%d: irq trap\n", ap->id);
+                return 1;
        }
 #endif
        return 0;       /* irq not handled */
@@ -5064,6 +5097,7 @@ EXPORT_SYMBOL_GPL(ata_port_stop);
 EXPORT_SYMBOL_GPL(ata_host_stop);
 EXPORT_SYMBOL_GPL(ata_interrupt);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
+EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
 EXPORT_SYMBOL_GPL(ata_bmdma_start);
 EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
@@ -5109,6 +5143,8 @@ EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
 EXPORT_SYMBOL_GPL(ata_pci_device_resume);
+EXPORT_SYMBOL_GPL(ata_pci_default_filter);
+EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
 #endif /* CONFIG_PCI */
 EXPORT_SYMBOL_GPL(ata_device_suspend);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index bd9f2176f79a..a1259b242b8e 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -521,13 +521,11 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
        printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", 
               id, drv_stat);
-        /* For our last chance pick, use medium read error because
+        /* We need a sensible error return here, which is tricky, and one
-         * it's much more common than an ATA drive telling you a write
+           that won't cause people to do things like return a disk wrongly */
-         * has failed.
+        *sk = ABORTED_COMMAND;
-         */
+        *asc = 0x00;
-        *sk = MEDIUM_ERROR;
+        *ascq = 0x00;
-        *asc = 0x11; /* "unrecovered read error" */
-        *ascq = 0x04; /*  "auto-reallocation failed" */
 translate_done:
        printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
@@ -672,6 +670,41 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
        }
 }
+static void ata_scsi_sdev_config(struct scsi_device *sdev)
+{
+        sdev->use_10_for_rw = 1;
+        sdev->use_10_for_ms = 1;
+}
+static void ata_scsi_dev_config(struct scsi_device *sdev,
+                                struct ata_device *dev)
+{
+        unsigned int max_sectors;
+        /* TODO: 2048 is an arbitrary number, not the
+         * hardware maximum.  This should be increased to
+         * 65534 when Jens Axboe's patch for dynamically
+         * determining max_sectors is merged.
+         */
+        max_sectors = ATA_MAX_SECTORS;
+        if (dev->flags & ATA_DFLAG_LBA48)
+                max_sectors = 2048;
+        if (dev->max_sectors)
+                max_sectors = dev->max_sectors;
+        blk_queue_max_sectors(sdev->request_queue, max_sectors);
+        /*
+         * SATA DMA transfers must be multiples of 4 byte, so
+         * we need to pad ATAPI transfers using an extra sg.
+         * Decrement max hw segments accordingly.
+         */
+        if (dev->class == ATA_DEV_ATAPI) {
+                request_queue_t *q = sdev->request_queue;
+                blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
+        }
+}
 /**
 *      ata_scsi_slave_config - Set SCSI device attributes
 *      @sdev: SCSI device to examine
@@ -686,41 +719,18 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
 int ata_scsi_slave_config(struct scsi_device *sdev)
 {
-        sdev->use_10_for_rw = 1;
+        ata_scsi_sdev_config(sdev);
-        sdev->use_10_for_ms = 1;
        blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
        if (sdev->id < ATA_MAX_DEVICES) {
                struct ata_port *ap;
                struct ata_device *dev;
-                unsigned int max_sectors;
                ap = (struct ata_port *) &sdev->host->hostdata[0];
                dev = &ap->device[sdev->id];
-                /* TODO: 2048 is an arbitrary number, not the
+                ata_scsi_dev_config(sdev, dev);
-                 * hardware maximum.  This should be increased to
-                 * 65534 when Jens Axboe's patch for dynamically
-                 * determining max_sectors is merged.
-                 */
-                max_sectors = ATA_MAX_SECTORS;
-                if (dev->flags & ATA_DFLAG_LBA48)
-                        max_sectors = 2048;
-                if (dev->max_sectors)
-                        max_sectors = dev->max_sectors;
-                blk_queue_max_sectors(sdev->request_queue, max_sectors);
-                /*
-                 * SATA DMA transfers must be multiples of 4 byte, so
-                 * we need to pad ATAPI transfers using an extra sg.
-                 * Decrement max hw segments accordingly.
-                 */
-                if (dev->class == ATA_DEV_ATAPI) {
-                        request_queue_t *q = sdev->request_queue;
-                        blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
-                }
        }
        return 0;       /* scsi layer doesn't check return value, sigh */
@@ -1552,7 +1562,7 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
 *      @buflen: Response buffer length.
 *
 *      Returns standard device identification data associated
- *      with non-EVPD INQUIRY command output.
+ *      with non-VPD INQUIRY command output.
 *
 *      LOCKING:
 *      spin_lock_irqsave(host_set lock)
@@ -1603,12 +1613,12 @@ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
 }
 /**
- *      ata_scsiop_inq_00 - Simulate INQUIRY EVPD page 0, list of pages
+ *      ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages
 *      @args: device IDENTIFY data / SCSI command of interest.
 *      @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
 *      @buflen: Response buffer length.
 *
- *      Returns list of inquiry EVPD pages available.
+ *      Returns list of inquiry VPD pages available.
 *
 *      LOCKING:
 *      spin_lock_irqsave(host_set lock)
@@ -1622,7 +1632,7 @@ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf,
                0x80,   /* page 0x80, unit serial no page */
                0x83    /* page 0x83, device ident page */
        };
-        rbuf[3] = sizeof(pages);        /* number of supported EVPD pages */
+        rbuf[3] = sizeof(pages);        /* number of supported VPD pages */
        if (buflen > 6)
                memcpy(rbuf + 4, pages, sizeof(pages));
@@ -1631,7 +1641,7 @@ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf,
 }
 /**
- *      ata_scsiop_inq_80 - Simulate INQUIRY EVPD page 80, device serial number
+ *      ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number
 *      @args: device IDENTIFY data / SCSI command of interest.
 *      @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
 *      @buflen: Response buffer length.
@@ -1660,16 +1670,16 @@ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf,
        return 0;
 }
-static const char * const inq_83_str = "Linux ATA-SCSI simulator";
 /**
- *      ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity
+ *      ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity
 *      @args: device IDENTIFY data / SCSI command of interest.
 *      @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
 *      @buflen: Response buffer length.
 *
- *      Returns device identification.  Currently hardcoded to
+ *      Yields two logical unit device identification designators:
- *      return "Linux ATA-SCSI simulator".
+ *       - vendor specific ASCII containing the ATA serial number
+ *       - SAT defined "t10 vendor id based" containing ASCII vendor
+ *         name ("ATA     "), model and serial numbers.
 *
 *      LOCKING:
 *      spin_lock_irqsave(host_set lock)
@@ -1678,16 +1688,39 @@ static const char * const inq_83_str = "Linux ATA-SCSI simulator";
 unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
                              unsigned int buflen)
 {
-        rbuf[1] = 0x83;                 /* this page code */
+        int num;
-        rbuf[3] = 4 + strlen(inq_83_str);       /* page len */
+        const int sat_model_serial_desc_len = 68;
+        const int ata_model_byte_len = 40;
-        /* our one and only identification descriptor (vendor-specific) */
+        rbuf[1] = 0x83;                 /* this page code */
-        if (buflen > (strlen(inq_83_str) + 4 + 4 - 1)) {
+        num = 4;
-                rbuf[4 + 0] = 2;        /* code set: ASCII */
-                rbuf[4 + 3] = strlen(inq_83_str);
+        if (buflen > (ATA_SERNO_LEN + num + 3)) {
-                memcpy(rbuf + 4 + 4, inq_83_str, strlen(inq_83_str));
+                /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */
+                rbuf[num + 0] = 2;      
+                rbuf[num + 3] = ATA_SERNO_LEN;
+                num += 4;
+                ata_id_string(args->id, (unsigned char *) rbuf + num,
+                              ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
+                num += ATA_SERNO_LEN;
        }
+        if (buflen > (sat_model_serial_desc_len + num + 3)) {
+                /* SAT defined lu model and serial numbers descriptor */
+                /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */
+                rbuf[num + 0] = 2;      
+                rbuf[num + 1] = 1;      
+                rbuf[num + 3] = sat_model_serial_desc_len;
+                num += 4;
+                memcpy(rbuf + num, "ATA     ", 8);
+                num += 8;
+                ata_id_string(args->id, (unsigned char *) rbuf + num,
+                              ATA_ID_PROD_OFS, ata_model_byte_len);
+                num += ata_model_byte_len;
+                ata_id_string(args->id, (unsigned char *) rbuf + num,
+                              ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
+                num += ATA_SERNO_LEN;
+        }
+        rbuf[3] = num - 4;    /* page len (assume less than 256 bytes) */
        return 0;
 }
@@ -2366,9 +2399,6 @@ ata_scsi_map_proto(u8 byte1)
                case 4:         /* PIO Data-in */
                case 5:         /* PIO Data-out */
-                        if (byte1 & 0xe0) {
-                                return ATA_PROT_PIO_MULT;
-                        }
                        return ATA_PROT_PIO;
                case 10:        /* Device Reset */
@@ -2407,6 +2437,10 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
        if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
                goto invalid_fld;
+        if (scsicmd[1] & 0xe0)
+                /* PIO multi not supported yet */
+                goto invalid_fld;
        /*
         * 12 and 16 byte CDBs use different offsets to
         * provide the various register values.
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index b3dc5f85ae0b..3c85c4b66e19 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -321,7 +321,7 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
                        = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
                i += 4;
-                VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", nelem,
+                VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
                                        (unsigned long)addr, len);
        }
        return i;
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 874c5be0843c..275ed9bd898c 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -1262,6 +1262,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
        void __iomem *port_mmio = mv_ap_base(ap);
        struct mv_port_priv *pp = ap->private_data;
        u32 out_ptr;
+        u8 ata_status;
        out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
@@ -1269,6 +1270,8 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
        WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
                pp->rsp_consumer);
+        ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
        /* increment our consumer index... */
        pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
@@ -1283,7 +1286,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
        writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
        /* Return ATA status register for completed CRPB */
-        return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
+        return ata_status;
 }
 /**
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 051e47d975ca..724f0ed6a52d 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -56,33 +56,35 @@
 #define DRV_NAME        "sata_svw"
 #define DRV_VERSION     "1.07"
-/* Taskfile registers offsets */
+enum {
-#define K2_SATA_TF_CMD_OFFSET           0x00
+        /* Taskfile registers offsets */
-#define K2_SATA_TF_DATA_OFFSET          0x00
+        K2_SATA_TF_CMD_OFFSET           = 0x00,
-#define K2_SATA_TF_ERROR_OFFSET         0x04
+        K2_SATA_TF_DATA_OFFSET          = 0x00,
-#define K2_SATA_TF_NSECT_OFFSET         0x08
+        K2_SATA_TF_ERROR_OFFSET         = 0x04,
-#define K2_SATA_TF_LBAL_OFFSET          0x0c
+        K2_SATA_TF_NSECT_OFFSET         = 0x08,
-#define K2_SATA_TF_LBAM_OFFSET          0x10
+        K2_SATA_TF_LBAL_OFFSET          = 0x0c,
-#define K2_SATA_TF_LBAH_OFFSET          0x14
+        K2_SATA_TF_LBAM_OFFSET          = 0x10,
-#define K2_SATA_TF_DEVICE_OFFSET        0x18
+        K2_SATA_TF_LBAH_OFFSET          = 0x14,
-#define K2_SATA_TF_CMDSTAT_OFFSET       0x1c
+        K2_SATA_TF_DEVICE_OFFSET        = 0x18,
-#define K2_SATA_TF_CTL_OFFSET           0x20
+        K2_SATA_TF_CMDSTAT_OFFSET       = 0x1c,
+        K2_SATA_TF_CTL_OFFSET           = 0x20,
-/* DMA base */
-#define K2_SATA_DMA_CMD_OFFSET          0x30
+        /* DMA base */
+        K2_SATA_DMA_CMD_OFFSET          = 0x30,
-/* SCRs base */
-#define K2_SATA_SCR_STATUS_OFFSET       0x40
+        /* SCRs base */
-#define K2_SATA_SCR_ERROR_OFFSET        0x44
+        K2_SATA_SCR_STATUS_OFFSET       = 0x40,
-#define K2_SATA_SCR_CONTROL_OFFSET      0x48
+        K2_SATA_SCR_ERROR_OFFSET        = 0x44,
+        K2_SATA_SCR_CONTROL_OFFSET      = 0x48,
-/* Others */
-#define K2_SATA_SICR1_OFFSET            0x80
+        /* Others */
-#define K2_SATA_SICR2_OFFSET            0x84
+        K2_SATA_SICR1_OFFSET            = 0x80,
-#define K2_SATA_SIM_OFFSET              0x88
+        K2_SATA_SICR2_OFFSET            = 0x84,
+        K2_SATA_SIM_OFFSET              = 0x88,
-/* Port stride */
-#define K2_SATA_PORT_OFFSET             0x100
+        /* Port stride */
+        K2_SATA_PORT_OFFSET             = 0x100,
+};
 static u8 k2_stat_check_status(struct ata_port *ap);
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index ee75b9b38ae8..9701a806539d 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -47,52 +47,58 @@
 #include <linux/libata.h>
 #define DRV_NAME        "sata_vsc"
-#define DRV_VERSION     "1.1"
+#define DRV_VERSION     "1.2"
-/* Interrupt register offsets (from chip base address) */
+enum {
-#define VSC_SATA_INT_STAT_OFFSET        0x00
+        /* Interrupt register offsets (from chip base address) */
-#define VSC_SATA_INT_MASK_OFFSET        0x04
+        VSC_SATA_INT_STAT_OFFSET        = 0x00,
+        VSC_SATA_INT_MASK_OFFSET        = 0x04,
-/* Taskfile registers offsets */
-#define VSC_SATA_TF_CMD_OFFSET          0x00
+        /* Taskfile registers offsets */
-#define VSC_SATA_TF_DATA_OFFSET         0x00
+        VSC_SATA_TF_CMD_OFFSET          = 0x00,
-#define VSC_SATA_TF_ERROR_OFFSET        0x04
+        VSC_SATA_TF_DATA_OFFSET         = 0x00,
-#define VSC_SATA_TF_FEATURE_OFFSET      0x06
+        VSC_SATA_TF_ERROR_OFFSET        = 0x04,
-#define VSC_SATA_TF_NSECT_OFFSET        0x08
+        VSC_SATA_TF_FEATURE_OFFSET      = 0x06,
-#define VSC_SATA_TF_LBAL_OFFSET         0x0c
+        VSC_SATA_TF_NSECT_OFFSET        = 0x08,
-#define VSC_SATA_TF_LBAM_OFFSET         0x10
+        VSC_SATA_TF_LBAL_OFFSET         = 0x0c,
-#define VSC_SATA_TF_LBAH_OFFSET         0x14
+        VSC_SATA_TF_LBAM_OFFSET         = 0x10,
-#define VSC_SATA_TF_DEVICE_OFFSET       0x18
+        VSC_SATA_TF_LBAH_OFFSET         = 0x14,
-#define VSC_SATA_TF_STATUS_OFFSET       0x1c
+        VSC_SATA_TF_DEVICE_OFFSET       = 0x18,
-#define VSC_SATA_TF_COMMAND_OFFSET      0x1d
+        VSC_SATA_TF_STATUS_OFFSET       = 0x1c,
-#define VSC_SATA_TF_ALTSTATUS_OFFSET    0x28
+        VSC_SATA_TF_COMMAND_OFFSET      = 0x1d,
-#define VSC_SATA_TF_CTL_OFFSET          0x29
+        VSC_SATA_TF_ALTSTATUS_OFFSET    = 0x28,
+        VSC_SATA_TF_CTL_OFFSET          = 0x29,
-/* DMA base */
-#define VSC_SATA_UP_DESCRIPTOR_OFFSET   0x64
+        /* DMA base */
-#define VSC_SATA_UP_DATA_BUFFER_OFFSET  0x6C
+        VSC_SATA_UP_DESCRIPTOR_OFFSET   = 0x64,
-#define VSC_SATA_DMA_CMD_OFFSET         0x70
+        VSC_SATA_UP_DATA_BUFFER_OFFSET  = 0x6C,
+        VSC_SATA_DMA_CMD_OFFSET         = 0x70,
-/* SCRs base */
-#define VSC_SATA_SCR_STATUS_OFFSET      0x100
+        /* SCRs base */
-#define VSC_SATA_SCR_ERROR_OFFSET       0x104
+        VSC_SATA_SCR_STATUS_OFFSET      = 0x100,
-#define VSC_SATA_SCR_CONTROL_OFFSET     0x108
+        VSC_SATA_SCR_ERROR_OFFSET       = 0x104,
+        VSC_SATA_SCR_CONTROL_OFFSET     = 0x108,
-/* Port stride */
-#define VSC_SATA_PORT_OFFSET            0x200
+        /* Port stride */
+        VSC_SATA_PORT_OFFSET            = 0x200,
-/* Error interrupt status bit offsets */
-#define VSC_SATA_INT_ERROR_E_OFFSET     2
+        /* Error interrupt status bit offsets */
-#define VSC_SATA_INT_ERROR_P_OFFSET     4
+        VSC_SATA_INT_ERROR_CRC          = 0x40,
-#define VSC_SATA_INT_ERROR_T_OFFSET     5
+        VSC_SATA_INT_ERROR_T            = 0x20,
-#define VSC_SATA_INT_ERROR_M_OFFSET     1
+        VSC_SATA_INT_ERROR_P            = 0x10,
+        VSC_SATA_INT_ERROR_R            = 0x8,
+        VSC_SATA_INT_ERROR_E            = 0x4,
+        VSC_SATA_INT_ERROR_M            = 0x2,
+        VSC_SATA_INT_PHY_CHANGE         = 0x1,
+        VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC  | VSC_SATA_INT_ERROR_T | \
+                              VSC_SATA_INT_ERROR_P    | VSC_SATA_INT_ERROR_R | \
+                              VSC_SATA_INT_ERROR_E    | VSC_SATA_INT_ERROR_M | \
+                              VSC_SATA_INT_PHY_CHANGE),
+};
 #define is_vsc_sata_int_err(port_idx, int_status) \
-         (int_status & ((1 << (VSC_SATA_INT_ERROR_E_OFFSET + (8 * port_idx))) | \
+         (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
-                        (1 << (VSC_SATA_INT_ERROR_P_OFFSET + (8 * port_idx))) | \
-                        (1 << (VSC_SATA_INT_ERROR_T_OFFSET + (8 * port_idx))) | \
-                        (1 << (VSC_SATA_INT_ERROR_M_OFFSET + (8 * port_idx)))   \
-                       )\
-         )
 static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
@@ -215,14 +221,6 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
                        ap = host_set->ports[i];
-                        if (is_vsc_sata_int_err(i, int_status)) {
-                                u32 err_status;
-                                printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
-                                err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
-                                vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-                                handled++;
-                        }
                        if (ap && !(ap->flags &
                                    (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) {
                                struct ata_queued_cmd *qc;
@@ -230,12 +228,26 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
                                qc = ata_qc_from_tag(ap, ap->active_tag);
                                if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
                                        handled += ata_host_intr(ap, qc);
-                                } else {
+                                } else if (is_vsc_sata_int_err(i, int_status)) {
-                                        printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
+                                        /*
+                                         * On some chips (i.e. Intel 31244), an error 
+                                         * interrupt will sneak in at initialization
+                                         * time (phy state changes).  Clearing the SCR
+                                         * error register is not required, but it prevents
+                                         * the phy state change interrupts from recurring 
+                                         * later.
+                                         */
+                                        u32 err_status;
+                                        err_status = vsc_sata_scr_read(ap, SCR_ERROR);
+                                        printk(KERN_DEBUG "%s: clearing interrupt, "
+                                               "status %x; sata err status %x\n",
+                                               __FUNCTION__,
+                                               int_status, err_status);
+                                        vsc_sata_scr_write(ap, SCR_ERROR, err_status);
+                                        /* Clear interrupt status */
                                        ata_chk_status(ap);
                                        handled++;
                                }
                        }
                }
        }
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 8c5c276c5577..7572665a8855 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -375,23 +375,18 @@ static void serial21285_setup_ports(void)
 }
 #ifdef CONFIG_SERIAL_21285_CONSOLE
+static void serial21285_console_putchar(struct uart_port *port, int ch)
+{
+        while (*CSR_UARTFLG & 0x20)
+                barrier();
+        *CSR_UARTDR = ch;
+}
 static void
 serial21285_console_write(struct console *co, const char *s,
                          unsigned int count)
 {
-        int i;
+        uart_console_write(&serial21285_port, s, count, serial21285_console_putchar);
-        for (i = 0; i < count; i++) {
-                while (*CSR_UARTFLG & 0x20)
-                        barrier();
-                *CSR_UARTDR = s[i];
-                if (s[i] == '\n') {
-                        while (*CSR_UARTFLG & 0x20)
-                                barrier();
-                        *CSR_UARTDR = '\r';
-                }
-        }
 }
 static void __init
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 7aca22c9976d..5996d3cd0ed8 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2182,6 +2182,14 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
        }
 }
+static void serial8250_console_putchar(struct uart_port *port, int ch)
+{
+        struct uart_8250_port *up = (struct uart_8250_port *)port;
+        wait_for_xmitr(up, UART_LSR_THRE);
+        serial_out(up, UART_TX, ch);
+}
 /*
 *      Print a string to the serial port trying not to disturb
 *      any possible real use of the port...
@@ -2193,7 +2201,6 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_8250_port *up = &serial8250_ports[co->index];
        unsigned int ier;
-        int i;
        touch_nmi_watchdog();
@@ -2207,22 +2214,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
        else
                serial_out(up, UART_IER, 0);
-        /*
+        uart_console_write(&up->port, s, count, serial8250_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++, s++) {
-                wait_for_xmitr(up, UART_LSR_THRE);
-                /*
-                 *      Send the character out.
-                 *      If a LF, also do CR...
-                 */
-                serial_out(up, UART_TX, *s);
-                if (*s == 10) {
-                        wait_for_xmitr(up, UART_LSR_THRE);
-                        serial_out(up, UART_TX, 13);
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index 59ba5d993b4b..7e511199b4c5 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -74,7 +74,7 @@ static void __init wait_for_xmitr(struct uart_port *port)
        }
 }
-static void __init putc(struct uart_port *port, unsigned char c)
+static void __init putc(struct uart_port *port, int c)
 {
        wait_for_xmitr(port);
        serial_out(port, UART_TX, c);
@@ -89,12 +89,7 @@ static void __init early_uart_write(struct console *console, const char *s, unsi
        ier = serial_in(port, UART_IER);
        serial_out(port, UART_IER, 0);
-        while (*s && count-- > 0) {
+        uart_console_write(port, s, count, putc);
-                putc(port, *s);
-                if (*s == '\n')
-                        putc(port, '\r');
-                s++;
-        }
        /* Wait for transmitter to become empty and restore the IER */
        wait_for_xmitr(port);
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 321a3b3a5728..e04d5e82d9ae 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -591,12 +591,18 @@ static struct uart_amba_port amba_ports[UART_NR] = {
 #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
+static void pl010_console_putchar(struct uart_port *port, int ch)
+{
+        while (!UART_TX_READY(UART_GET_FR(port)))
+                barrier();
+        UART_PUT_CHAR(port, ch);
+}
 static void
 pl010_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_port *port = &amba_ports[co->index].port;
        unsigned int status, old_cr;
-        int i;
        /*
         *      First save the CR then disable the interrupts
@@ -604,21 +610,7 @@ pl010_console_write(struct console *co, const char *s, unsigned int count)
        old_cr = UART_GET_CR(port);
        UART_PUT_CR(port, UART01x_CR_UARTEN);
-        /*
+        uart_console_write(port, s, count, pl010_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++) {
-                do {
-                        status = UART_GET_FR(port);
-                } while (!UART_TX_READY(status));
-                UART_PUT_CHAR(port, s[i]);
-                if (s[i] == '\n') {
-                        do {
-                                status = UART_GET_FR(port);
-                        } while (!UART_TX_READY(status));
-                        UART_PUT_CHAR(port, '\r');
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 034a029e356e..3d966cfc9a38 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -587,14 +587,12 @@ static struct uart_amba_port *amba_ports[UART_NR];
 #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
-static inline void
+static void pl011_console_putchar(struct uart_port *port, int ch)
-pl011_console_write_char(struct uart_amba_port *uap, char ch)
 {
-        unsigned int status;
+        struct uart_amba_port *uap = (struct uart_amba_port *)port;
-        do {
+        while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
-                status = readw(uap->port.membase + UART01x_FR);
+                barrier();
-        } while (status & UART01x_FR_TXFF);
        writew(ch, uap->port.membase + UART01x_DR);
 }
@@ -603,7 +601,6 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_amba_port *uap = amba_ports[co->index];
        unsigned int status, old_cr, new_cr;
-        int i;
        clk_enable(uap->clk);
@@ -615,14 +612,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
        new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
        writew(new_cr, uap->port.membase + UART011_CR);
-        /*
+        uart_console_write(&uap->port, s, count, pl011_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++) {
-                pl011_console_write_char(uap, s[i]);
-                if (s[i] == '\n')
-                        pl011_console_write_char(uap, '\r');
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
index 2113feb75c39..6547fe0cef96 100644
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -711,6 +711,12 @@ void __init at91_register_uart(int idx, int port)
 }
 #ifdef CONFIG_SERIAL_AT91_CONSOLE
+static void at91_console_putchar(struct uart_port *port, int ch)
+{
+        while (!(UART_GET_CSR(port) & AT91_US_TXRDY))
+                barrier();
+        UART_PUT_CHAR(port, ch);
+}
 /*
 * Interrupts are disabled on entering
@@ -718,7 +724,7 @@ void __init at91_register_uart(int idx, int port)
 static void at91_console_write(struct console *co, const char *s, u_int count)
 {
        struct uart_port *port = at91_ports + co->index;
-        unsigned int status, i, imr;
+        unsigned int status, imr;
        /*
         *      First, save IMR and then disable interrupts
@@ -726,21 +732,7 @@ static void at91_console_write(struct console *co, const char *s, u_int count)
        imr = UART_GET_IMR(port);       /* get interrupt mask */
        UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY);
-        /*
+        uart_console_write(port, s, count, at91_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++) {
-                do {
-                        status = UART_GET_CSR(port);
-                } while (!(status & AT91_US_TXRDY));
-                UART_PUT_CHAR(port, s[i]);
-                if (s[i] == '\n') {
-                        do {
-                                status = UART_GET_CSR(port);
-                        } while (!(status & AT91_US_TXRDY));
-                        UART_PUT_CHAR(port, '\r');
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c
index 344022fe53ef..29f94bbb79be 100644
--- a/drivers/serial/au1x00_uart.c
+++ b/drivers/serial/au1x00_uart.c
@@ -1121,6 +1121,14 @@ static inline void wait_for_xmitr(struct uart_8250_port *up)
        }
 }
+static void au1x00_console_putchar(struct uart_port *port, int ch)
+{
+        struct uart_8250_port *up = (struct uart_8250_port *)port;
+        wait_for_xmitr(up);
+        serial_out(up, UART_TX, ch);
+}
 /*
 *      Print a string to the serial port trying not to disturb
 *      any possible real use of the port...
@@ -1132,7 +1140,6 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_8250_port *up = &serial8250_ports[co->index];
        unsigned int ier;
-        int i;
        /*
         *      First save the UER then disable the interrupts
@@ -1140,22 +1147,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
        ier = serial_in(up, UART_IER);
        serial_out(up, UART_IER, 0);
-        /*
+        uart_console_write(&up->port, s, count, au1x00_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++, s++) {
-                wait_for_xmitr(up);
-                /*
-                 *      Send the character out.
-                 *      If a LF, also do CR...
-                 */
-                serial_out(up, UART_TX, *s);
-                if (*s == 10) {
-                        wait_for_xmitr(up);
-                        serial_out(up, UART_TX, 13);
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index ce7b2e4ecd17..2691112c84ad 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -424,6 +424,13 @@ static struct uart_port clps711x_ports[UART_NR] = {
 };
 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+static void clps711xuart_console_putchar(struct uart_port *port, int ch)
+{
+        while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
+                barrier();
+        clps_writel(ch, UARTDR(port));
+}
 /*
 *      Print a string to the serial port trying not to disturb
 *      any possible real use of the port...
@@ -438,7 +445,6 @@ clps711xuart_console_write(struct console *co, const char *s,
 {
        struct uart_port *port = clps711x_ports + co->index;
        unsigned int status, syscon;
-        int i;
        /*
         *      Ensure that the port is enabled.
@@ -446,21 +452,7 @@ clps711xuart_console_write(struct console *co, const char *s,
        syscon = clps_readl(SYSCON(port));
        clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
-        /*
+        uart_console_write(port, s, count, clps711xuart_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++) {
-                do {
-                        status = clps_readl(SYSFLG(port));
-                } while (status & SYSFLG_UTXFF);
-                clps_writel(s[i], UARTDR(port));
-                if (s[i] == '\n') {
-                        do {
-                                status = clps_readl(SYSFLG(port));
-                        } while (status & SYSFLG_UTXFF);
-                        clps_writel('\r', UARTDR(port));
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index ba5541de673b..bf71bad5c34f 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -674,11 +674,12 @@ static void dz_reset(struct dz_port *dport)
 }
 #ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_put_char(struct dz_port *dport, unsigned char ch)
+static void dz_console_putchar(struct uart_port *port, int ch)
 {
+        struct dz_port *dport = (struct dz_port *)uport;
        unsigned long flags;
        int loops = 2500;
-        unsigned short tmp = ch;
+        unsigned short tmp = (unsigned char)ch;
        /* this code sends stuff out to serial device - spinning its
           wheels and waiting. */
@@ -694,6 +695,7 @@ static void dz_console_put_char(struct dz_port *dport, unsigned char ch)
        spin_unlock_irqrestore(&dport->port.lock, flags);
 }
 /*
 * -------------------------------------------------------------------
 * dz_console_print ()
@@ -710,11 +712,7 @@ static void dz_console_print(struct console *cons,
 #ifdef DEBUG_DZ
        prom_printf((char *) str);
 #endif
-        while (count--) {
+        uart_console_write(&dport->port, str, count, dz_console_putchar);
-                if (*str == '\n')
-                        dz_console_put_char(dport, '\r');
-                dz_console_put_char(dport, *str++);
-        }
 }
 static int __init dz_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 4d53fb5ca87b..c3b7a6673e9c 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -743,6 +743,13 @@ static void __init imx_init_ports(void)
 }
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
+static void imx_console_putchar(struct uart_port *port, int ch)
+{
+        struct imx_port *sport = (struct imx_port *)port;
+        while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
+                barrier();
+        URTX0((u32)sport->port.membase) = ch;
+}
 /*
 * Interrupts are disabled on entering
@@ -751,7 +758,7 @@ static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct imx_port *sport = &imx_ports[co->index];
-        unsigned int old_ucr1, old_ucr2, i;
+        unsigned int old_ucr1, old_ucr2;
        /*
         *      First, save UCR1/2 and then disable interrupts
@@ -764,22 +771,7 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
                           & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
        UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN;
-        /*
+        uart_console_write(&sport->port, s, count, imx_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++) {
-                while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
-                        barrier();
-                URTX0((u32)sport->port.membase) = s[i];
-                if (s[i] == '\n') {
-                        while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
-                                barrier();
-                        URTX0((u32)sport->port.membase) = '\r';
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 193722d680cf..651772474ac1 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -967,8 +967,9 @@ static struct zilog_layout * __init get_zs(int chip)
 #define ZS_PUT_CHAR_MAX_DELAY   2000    /* 10 ms */
 #ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE
-static void ip22zilog_put_char(struct zilog_channel *channel, unsigned char ch)
+static void ip22zilog_put_char(struct uart_port *port, int ch)
 {
+        struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
        int loops = ZS_PUT_CHAR_MAX_DELAY;
        /* This is a timed polling loop so do not switch the explicit
@@ -992,16 +993,10 @@ static void
 ip22zilog_console_write(struct console *con, const char *s, unsigned int count)
 {
        struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
-        struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
        unsigned long flags;
-        int i;
        spin_lock_irqsave(&up->port.lock, flags);
-        for (i = 0; i < count; i++, s++) {
+        uart_console_write(&up->port, s, count, ip22zilog_put_char);
-                ip22zilog_put_char(channel, *s);
-                if (*s == 10)
-                        ip22zilog_put_char(channel, 13);
-        }
        udelay(2);
        spin_unlock_irqrestore(&up->port.lock, flags);
 }
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 242a04104393..876bc5e027bb 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1039,6 +1039,14 @@ static inline void wait_for_xmitr(struct uart_sio_port *up)
        }
 }
+static void m32r_sio_console_putchar(struct uart_port *port, int ch)
+{
+        struct uart_sio_port *up = (struct uart_sio_port *)port;
+        wait_for_xmitr(up);
+        sio_out(up, SIOTXB, ch);
+}
 /*
 *      Print a string to the serial port trying not to disturb
 *      any possible real use of the port...
@@ -1058,23 +1066,7 @@ static void m32r_sio_console_write(struct console *co, const char *s,
        ier = sio_in(up, SIOTRCR);
        sio_out(up, SIOTRCR, 0);
-        /*
+        uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++, s++) {
-                wait_for_xmitr(up);
-                /*
-                 *      Send the character out.
-                 *      If a LF, also do CR...
-                 */
-                sio_out(up, SIOTXB, *s);
-                if (*s == 10) {
-                        wait_for_xmitr(up);
-                        sio_out(up, SIOTXB, 13);
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 61dd17d7bace..928e6cf12dca 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -603,15 +603,14 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
                udelay(1);
        /* Write all the chars */
-        for ( i=0 ; i<count ; i++ ) {
+        for (i = 0; i < count; i++, s++) {
-        
-                /* Send the char */
-                out_8(&psc->mpc52xx_psc_buffer_8, *s);
                /* Line return handling */
-                if ( *s++ == '\n' )
+                if (*s == '\n')
                        out_8(&psc->mpc52xx_psc_buffer_8, '\r');
                
+                /* Send the char */
+                out_8(&psc->mpc52xx_psc_buffer_8, *s);
                /* Wait the TX buffer to be empty */
                j = 20000;      /* Maximum wait */      
                while (!(in_be16(&psc->mpc52xx_psc_status) & 
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 9b7ed58cb53b..513ff8597707 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1916,6 +1916,16 @@ static void __exit exit_pmz(void)
 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+static void pmz_console_putchar(struct uart_port *port, int ch)
+{
+        struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+        /* Wait for the transmit buffer to empty. */
+        while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+                udelay(5);
+        write_zsdata(uap, ch);
+}
 /*
 * Print a string to the serial port trying not to disturb
 * any possible real use of the port...
@@ -1924,7 +1934,6 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
 {
        struct uart_pmac_port *uap = &pmz_ports[con->index];
        unsigned long flags;
-        int i;
        if (ZS_IS_ASLEEP(uap))
                return;
@@ -1934,17 +1943,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
        write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
        write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR);
-        for (i = 0; i < count; i++) {
+        uart_console_write(&uap->port, s, count, pmz_console_putchar);
-                /* Wait for the transmit buffer to empty. */
-                while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
-                        udelay(5);
-                write_zsdata(uap, s[i]);
-                if (s[i] == 10) {
-                        while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
-                                udelay(5);
-                        write_zsdata(uap, R13);
-                }
-        }
        /* Restore the values in the registers. */
        write_zsreg(uap, R1, uap->curregs[1]);
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 10535f00301f..77d4568ccc3a 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -619,6 +619,14 @@ static inline void wait_for_xmitr(struct uart_pxa_port *up)
        }
 }
+static void serial_pxa_console_putchar(struct uart_port *port, int ch)
+{
+        struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+        wait_for_xmitr(up);
+        serial_out(up, UART_TX, ch);
+}
 /*
 * Print a string to the serial port trying not to disturb
 * any possible real use of the port...
@@ -630,7 +638,6 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_pxa_port *up = &serial_pxa_ports[co->index];
        unsigned int ier;
-        int i;
        /*
         *      First save the IER then disable the interrupts
@@ -638,22 +645,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
        ier = serial_in(up, UART_IER);
        serial_out(up, UART_IER, UART_IER_UUE);
-        /*
+        uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++, s++) {
-                wait_for_xmitr(up);
-                /*
-                 *      Send the character out.
-                 *      If a LF, also do CR...
-                 */
-                serial_out(up, UART_TX, *s);
-                if (*s == 10) {
-                        wait_for_xmitr(up);
-                        serial_out(up, UART_TX, 13);
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 00d7c0ad8cbf..f5aac92fb798 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1586,25 +1586,19 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
 }
 static void
-s3c24xx_serial_console_write(struct console *co, const char *s,
+s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
-                             unsigned int count)
 {
-        int i;
        unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+        while (!s3c24xx_serial_console_txrdy(port, ufcon))
+                barrier();
+        wr_regb(cons_uart, S3C2410_UTXH, ch);
+}
-        for (i = 0; i < count; i++) {
+static void
-                while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon))
+s3c24xx_serial_console_write(struct console *co, const char *s,
-                        barrier();
+                             unsigned int count)
+{
-                wr_regb(cons_uart, S3C2410_UTXH, s[i]);
+        uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
-                if (s[i] == '\n') {
-                        while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon))
-                                barrier();
-                        wr_regb(cons_uart, S3C2410_UTXH, '\r');
-                }
-        }
 }
 static void __init
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 2c00b8625852..c2d9068b491d 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -689,6 +689,14 @@ void __init sa1100_register_uart(int idx, int port)
 #ifdef CONFIG_SERIAL_SA1100_CONSOLE
+static void sa1100_console_putchar(struct uart_port *port, int ch)
+{
+        struct sa1100_port *sport = (struct sa1100_port *)port;
+        while (!(UART_GET_UTSR1(sport) & UTSR1_TNF))
+                barrier();
+        UART_PUT_CHAR(sport, ch);
+}
 /*
 * Interrupts are disabled on entering
@@ -697,7 +705,7 @@ static void
 sa1100_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct sa1100_port *sport = &sa1100_ports[co->index];
-        unsigned int old_utcr3, status, i;
+        unsigned int old_utcr3, status;
        /*
         *      First, save UTCR3 and then disable interrupts
@@ -706,21 +714,7 @@ sa1100_console_write(struct console *co, const char *s, unsigned int count)
        UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) |
                                UTCR3_TXE);
-        /*
+        uart_console_write(&sport->port, s, count, sa1100_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++) {
-                do {
-                        status = UART_GET_UTSR1(sport);
-                } while (!(status & UTSR1_TNF));
-                UART_PUT_CHAR(sport, s[i]);
-                if (s[i] == '\n') {
-                        do {
-                                status = UART_GET_UTSR1(sport);
-                        } while (!(status & UTSR1_TNF));
-                        UART_PUT_CHAR(sport, '\r');
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index cc1faa31d124..fcd7744c4253 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1755,6 +1755,27 @@ static int uart_read_proc(char *page, char **start, off_t off,
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
 /*
+ *      uart_console_write - write a console message to a serial port
+ *      @port: the port to write the message
+ *      @s: array of characters
+ *      @count: number of characters in string to write
+ *      @write: function to write character to port
+ */
+void uart_console_write(struct uart_port *port, const char *s,
+                        unsigned int count,
+                        void (*putchar)(struct uart_port *, int))
+{
+        unsigned int i;
+        for (i = 0; i < count; i++, s++) {
+                if (*s == '\n')
+                        putchar(port, '\r');
+                putchar(port, *s);
+        }
+}
+EXPORT_SYMBOL_GPL(uart_console_write);
+/*
 *      Check whether an invalid uart number has been specified, and
 *      if so, search for the first available port that does have
 *      console support.
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 04186eaae227..aa521b8e0d4e 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -543,6 +543,12 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
 #else
 # define LH7A40X_CONSOLE &lh7a40x_console
+static void lh7a40xuart_console_putchar(struct uart_port *port, int ch)
+{
+        while (UR(port, UART_R_STATUS) & nTxRdy)
+                ;
+        UR(port, UART_R_DATA) = ch;
+}
 static void lh7a40xuart_console_write (struct console* co,
                                       const char* s,
@@ -556,16 +562,7 @@ static void lh7a40xuart_console_write (struct console* co,
        UR (port, UART_R_INTEN) = 0;            /* Disable all interrupts */
        BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */
-        for (; count-- > 0; ++s) {
+        uart_console_write(port, s, count, lh7a40xuart_console_putchar);
-                while (UR (port, UART_R_STATUS) & nTxRdy)
-                        ;
-                UR (port, UART_R_DATA) = *s;
-                if (*s == '\n') {
-                        while ((UR (port, UART_R_STATUS) & TxBusy))
-                                ;
-                        UR (port, UART_R_DATA) = '\r';
-                }
-        }
                                /* Wait until all characters are sent */
        while (UR (port, UART_R_STATUS) & TxBusy)
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 141173efd463..b848b7d94412 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -863,6 +863,14 @@ static inline void wait_for_xmitr(struct uart_txx9_port *up)
        }
 }
+static void serial_txx9_console_putchar(struct uart_port *port, int ch)
+{
+        struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+        wait_for_xmitr(up);
+        sio_out(up, TXX9_SITFIFO, ch);
+}
 /*
 *      Print a string to the serial port trying not to disturb
 *      any possible real use of the port...
@@ -874,7 +882,6 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
 {
        struct uart_txx9_port *up = &serial_txx9_ports[co->index];
        unsigned int ier, flcr;
-        int i;
        /*
         *      First save the UER then disable the interrupts
@@ -888,22 +895,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
        if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
                sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);
-        /*
+        uart_console_write(&up->port, s, count, serial_txx9_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++, s++) {
-                wait_for_xmitr(up);
-                /*
-                 *      Send the character out.
-                 *      If a LF, also do CR...
-                 */
-                sio_out(up, TXX9_SITFIFO, *s);
-                if (*s == 10) {
-                        wait_for_xmitr(up);
-                        sio_out(up, TXX9_SITFIFO, 13);
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index a2fb0c2fb121..bfbe9dc90cca 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -861,8 +861,9 @@ static int num_channels;
 #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
-static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c)
+static void sunsab_console_putchar(struct uart_port *port, int c)
 {
+        struct uart_sunsab_port *up = (struct uart_sunsab_port *)port;
        unsigned long flags;
        spin_lock_irqsave(&up->port.lock, flags);
@@ -876,13 +877,8 @@ static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char
 static void sunsab_console_write(struct console *con, const char *s, unsigned n)
 {
        struct uart_sunsab_port *up = &sunsab_ports[con->index];
-        int i;
-        for (i = 0; i < n; i++) {
+        uart_console_write(&up->port, s, n, sunsab_console_putchar);
-                if (*s == '\n')
-                        sunsab_console_putchar(up, '\r');
-                sunsab_console_putchar(up, *s++);
-        }
        sunsab_tec_wait(up);
 }
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 46c44b83f57c..7fc3d3b41d18 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1377,6 +1377,14 @@ static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
        }
 }
+static void sunsu_console_putchar(struct uart_port *port, int ch)
+{
+        struct uart_sunsu_port *up = (struct uart_sunsu_port *)port;
+        wait_for_xmitr(up);
+        serial_out(up, UART_TX, ch);
+}
 /*
 *      Print a string to the serial port trying not to disturb
 *      any possible real use of the port...
@@ -1386,7 +1394,6 @@ static void sunsu_console_write(struct console *co, const char *s,
 {
        struct uart_sunsu_port *up = &sunsu_ports[co->index];
        unsigned int ier;
-        int i;
        /*
         *      First save the UER then disable the interrupts
@@ -1394,22 +1401,7 @@ static void sunsu_console_write(struct console *co, const char *s,
        ier = serial_in(up, UART_IER);
        serial_out(up, UART_IER, 0);
-        /*
+        uart_console_write(&up->port, s, count, sunsu_console_putchar);
-         *      Now, do each character
-         */
-        for (i = 0; i < count; i++, s++) {
-                wait_for_xmitr(up);
-                /*
-                 *      Send the character out.
-                 *      If a LF, also do CR...
-                 */
-                serial_out(up, UART_TX, *s);
-                if (*s == 10) {
-                        wait_for_xmitr(up);
-                        serial_out(up, UART_TX, 13);
-                }
-        }
        /*
         *      Finally, wait for transmitter to become empty
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 10b35c6f287d..cd49ebbf4a45 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1252,8 +1252,9 @@ static struct zilog_layout __iomem * __init get_zs(int chip, int node)
 #define ZS_PUT_CHAR_MAX_DELAY   2000    /* 10 ms */
-static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch)
+static void sunzilog_putchar(struct uart_port *port, int ch)
 {
+        struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
        int loops = ZS_PUT_CHAR_MAX_DELAY;
        /* This is a timed polling loop so do not switch the explicit
@@ -1284,7 +1285,7 @@ static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
        spin_lock_irqsave(&sunzilog_serio_lock, flags);
-        sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch);
+        sunzilog_putchar(&up->port, ch);
        spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
@@ -1325,16 +1326,10 @@ static void
 sunzilog_console_write(struct console *con, const char *s, unsigned int count)
 {
        struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
-        struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
        unsigned long flags;
-        int i;
        spin_lock_irqsave(&up->port.lock, flags);
-        for (i = 0; i < count; i++, s++) {
+        uart_console_write(&up->port, s, count, sunzilog_putchar);
-                sunzilog_put_char(channel, *s);
-                if (*s == 10)
-                        sunzilog_put_char(channel, 13);
-        }
        udelay(2);
        spin_unlock_irqrestore(&up->port.lock, flags);
 }
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index bd6294132c18..df5e8713fa31 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -821,25 +821,23 @@ static void wait_for_xmitr(struct uart_port *port)
        }
 }
+static void siu_console_putchar(struct uart_port *port, int ch)
+{
+        wait_for_xmitr(port);
+        siu_write(port, UART_TX, ch);
+}
 static void siu_console_write(struct console *con, const char *s, unsigned count)
 {
        struct uart_port *port;
        uint8_t ier;
-        unsigned i;
        port = &siu_uart_ports[con->index];
        ier = siu_read(port, UART_IER);
        siu_write(port, UART_IER, 0);
-        for (i = 0; i < count && *s != '\0'; i++, s++) {
+        uart_console_write(port, s, count, siu_console_putchar);
-                wait_for_xmitr(port);
-                siu_write(port, UART_TX, *s);
-                if (*s == '\n') {
-                        wait_for_xmitr(port);
-                        siu_write(port, UART_TX, '\r');
-                }
-        }
        wait_for_xmitr(port);
        siu_write(port, UART_IER, ier);
diff --git a/include/asm-arm/arch-aaec2000/param.h b/include/asm-arm/arch-aaec2000/param.h
deleted file mode 100644
index 139936c2faf2..000000000000
--- a/include/asm-arm/arch-aaec2000/param.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/param.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-#endif /* __ASM_ARCH_PARAM_H */
diff --git a/include/asm-arm/arch-at91rm9200/param.h b/include/asm-arm/arch-at91rm9200/param.h
deleted file mode 100644
index 9480f8446852..000000000000
--- a/include/asm-arm/arch-at91rm9200/param.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/param.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-/*
- * We use default params
- */
-#endif
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S
index a5d489d7955a..9a2b67d24098 100644
--- a/include/asm-arm/arch-cl7500/debug-macro.S
+++ b/include/asm-arm/arch-cl7500/debug-macro.S
@@ -17,15 +17,5 @@
                orr     \rx, \rx, #0x00000be0
                .endm
-                .macro  senduart,rd,rx
+#define UART_SHIFT      2
-                strb    \rd, [\rx]
+#include <asm/hardware/debug-8250.S>
-                .endm
-                .macro  busyuart,rd,rx
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldrb    \rd, [\rx, #0x14]
-                tst     \rd, #0x20
-                beq     1001b
-                .endm
diff --git a/include/asm-arm/arch-cl7500/param.h b/include/asm-arm/arch-cl7500/param.h
deleted file mode 100644
index 974bf69fbb1a..000000000000
--- a/include/asm-arm/arch-cl7500/param.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-cl7500/param.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
diff --git a/include/asm-arm/arch-clps711x/param.h b/include/asm-arm/arch-clps711x/param.h
deleted file mode 100644
index 86f6bd29623d..000000000000
--- a/include/asm-arm/arch-clps711x/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/param.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S
index dcd03a40c502..f61cadabe0ec 100644
--- a/include/asm-arm/arch-ebsa110/debug-macro.S
+++ b/include/asm-arm/arch-ebsa110/debug-macro.S
@@ -16,19 +16,6 @@
                orr     \rx, \rx, #0x00000be0
                .endm
-                .macro  senduart,rd,rx
+#define UART_SHIFT      2
-                strb    \rd, [\rx]
+#define FLOW_CONTROL
-                .endm
+#include <asm/hardware/debug-8250.h>
-                .macro  busyuart,rd,rx
-1002:           ldrb    \rd, [\rx, #0x14]
-                and     \rd, \rd, #0x60
-                teq     \rd, #0x60
-                bne     1002b
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldrb    \rd, [\rx, #0x18]
-                tst     \rd, #0x10
-                beq     1001b
-                .endm
diff --git a/include/asm-arm/arch-ebsa110/param.h b/include/asm-arm/arch-ebsa110/param.h
deleted file mode 100644
index be19b08d1c75..000000000000
--- a/include/asm-arm/arch-ebsa110/param.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/param.h
- */
-#define HZ      200
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S
index 97d15fc629af..b48cec4a0c45 100644
--- a/include/asm-arm/arch-ebsa285/debug-macro.S
+++ b/include/asm-arm/arch-ebsa285/debug-macro.S
@@ -23,22 +23,10 @@
                orr     \rx, \rx, #0x000003f8
                .endm
-                .macro  senduart,rd,rx
+#define UART_SHIFT      0
-                strb    \rd, [\rx]
+#define FLOW_CONTROL
-                .endm
+#include <asm/hardware/debug-8250.S>
-                .macro  busyuart,rd,rx
-1002:           ldrb    \rd, [\rx, #0x5]
-                and     \rd, \rd, #0x60
-                teq     \rd, #0x60
-                bne     1002b
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldrb    \rd, [\rx, #0x6]
-                tst     \rd, #0x10
-                beq     1001b
-                .endm
 #else
        /* For EBSA285 debugging */
                .equ    dc21285_high, ARMCSR_BASE & 0xff000000
diff --git a/include/asm-arm/arch-ebsa285/param.h b/include/asm-arm/arch-ebsa285/param.h
deleted file mode 100644
index 3827103b27a0..000000000000
--- a/include/asm-arm/arch-ebsa285/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/param.h
- */
diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S
new file mode 100644
index 000000000000..397565a0c671
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/debug-macro.S
+ * Debugging macro include header
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <asm/arch/ep93xx-regs.h>
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                         @ MMU enabled?
+                ldreq   \rx, =EP93XX_APB_PHYS_BASE      @ Physical base
+                ldrne   \rx, =EP93XX_APB_VIRT_BASE      @ virtual base
+                orr     \rx, \rx, #0x000c0000
+                .endm
+#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h
new file mode 100644
index 000000000000..898b3ab7fd46
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/dma.h
@@ -0,0 +1,3 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/dma.h
+ */
diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S
new file mode 100644
index 000000000000..84140a28dfcf
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/entry-macro.S
+ * IRQ demultiplexing for EP93xx
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <asm/arch/ep93xx-regs.h>
+                .macro  disable_fiq
+                .endm
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                ldr     \base, =(EP93XX_AHB_VIRT_BASE)
+                orr     \base, \base, #0x000b0000
+                mov     \irqnr, #0
+                ldr     \irqstat, [\base]               @ lower 32 interrupts
+                cmp     \irqstat, #0
+                bne     1001f
+                eor     \base, \base, #0x00070000
+                ldr     \irqstat, [\base]               @ upper 32 interrupts
+                cmp     \irqstat, #0
+                beq     1002f
+                mov     \irqnr, #0x20
+1001:
+                movs    \tmp, \irqstat, lsl #16
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #16
+                movs    \tmp, \irqstat, lsl #8
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #8
+                movs    \tmp, \irqstat, lsl #4
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #4
+                movs    \tmp, \irqstat, lsl #2
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #2
+                movs    \tmp, \irqstat, lsl #1
+                addeq   \irqnr, \irqnr, #1
+                orrs    \base, \base, #1
+1002:
+                .endm
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
new file mode 100644
index 000000000000..71cea0b5841b
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
@@ -0,0 +1,125 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+ */
+#ifndef __ASM_ARCH_EP93XX_REGS_H
+#define __ASM_ARCH_EP93XX_REGS_H
+/*
+ * EP93xx linux memory map:
+ *
+ * virt         phys            size
+ * fe800000                     5M              per-platform mappings
+ * fed00000     80800000        2M              APB
+ * fef00000     80000000        1M              AHB
+ */
+#define EP93XX_AHB_PHYS_BASE            0x80000000
+#define EP93XX_AHB_VIRT_BASE            0xfef00000
+#define EP93XX_AHB_SIZE                 0x00100000
+#define EP93XX_APB_PHYS_BASE            0x80800000
+#define EP93XX_APB_VIRT_BASE            0xfed00000
+#define EP93XX_APB_SIZE                 0x00200000
+/* AHB peripherals */
+#define EP93XX_DMA_BASE                 (EP93XX_AHB_VIRT_BASE + 0x00000000)
+#define EP93XX_ETHERNET_BASE            (EP93XX_AHB_VIRT_BASE + 0x00010000)
+#define EP93XX_USB_BASE                 (EP93XX_AHB_VIRT_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE            (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_RASTER_BASE              (EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_GRAPHICS_ACCEL_BASE      (EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_SDRAM_CONTROLLER_BASE    (EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE   (EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_BOOT_ROM_BASE            (EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_IDE_BASE                 (EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_VIC1_BASE                (EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC2_BASE                (EP93XX_AHB_VIRT_BASE + 0x000c0000)
+/* APB peripherals */
+#define EP93XX_TIMER_BASE               (EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_REG(x)             (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD              EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE             EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL           EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER1_CLEAR             EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD              EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE             EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL           EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR             EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW         EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH        EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER3_LOAD              EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE             EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL           EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR             EP93XX_TIMER_REG(0x8c)
+#define EP93XX_I2S_BASE                 (EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_SECURITY_BASE            (EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_GPIO_BASE                (EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_REG(x)              (EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_A_INT_TYPE1         EP93XX_GPIO_REG(0x90)
+#define EP93XX_GPIO_A_INT_TYPE2         EP93XX_GPIO_REG(0x94)
+#define EP93XX_GPIO_A_INT_ACK           EP93XX_GPIO_REG(0x98)
+#define EP93XX_GPIO_A_INT_ENABLE        EP93XX_GPIO_REG(0x9c)
+#define EP93XX_GPIO_A_INT_STATUS        EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_TYPE1         EP93XX_GPIO_REG(0xac)
+#define EP93XX_GPIO_B_INT_TYPE2         EP93XX_GPIO_REG(0xb0)
+#define EP93XX_GPIO_B_INT_ACK           EP93XX_GPIO_REG(0xb4)
+#define EP93XX_GPIO_B_INT_ENABLE        EP93XX_GPIO_REG(0xb8)
+#define EP93XX_GPIO_B_INT_STATUS        EP93XX_GPIO_REG(0xbc)
+#define EP93XX_AAC_BASE                 (EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_SPI_BASE                 (EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IRDA_BASE                (EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_UART1_BASE               (EP93XX_APB_VIRT_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE          (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART2_BASE               (EP93XX_APB_VIRT_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE          (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART3_BASE               (EP93XX_APB_VIRT_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE          (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_KEY_MATRIX_BASE          (EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_ADC_BASE                 (EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE         (EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_PWM_BASE                 (EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_RTC_BASE                 (EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_SYSCON_BASE              (EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_REG(x)            (EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE       EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_CLOCK_CONTROL     EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_CLOCK_UARTBAUD    0x20000000
+#define EP93XX_SYSCON_CLOCK_USH_EN      0x10000000
+#define EP93XX_SYSCON_HALT              EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY           EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_DEVICE_CONFIG     EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE       0x00800000
+#define EP93XX_SYSCON_SWLOCK            EP93XX_SYSCON_REG(0xc0)
+#define EP93XX_WATCHDOG_BASE            (EP93XX_APB_VIRT_BASE + 0x00140000)
+#endif
diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h
new file mode 100644
index 000000000000..4d0b3023bff7
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/gesbc9312.h
+ */
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
new file mode 100644
index 000000000000..1ee14a14cba0
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/gpio.h
@@ -0,0 +1,107 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/gpio.h
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+#define GPIO_IN                         0
+#define GPIO_OUT                        1
+#define EP93XX_GPIO_LOW                 0
+#define EP93XX_GPIO_HIGH                1
+extern void gpio_line_config(int line, int direction);
+extern int  gpio_line_get(int line);
+extern void gpio_line_set(int line, int value);
+/* GPIO port A.  */
+#define EP93XX_GPIO_LINE_A(x)           ((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0         EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1         EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2         EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3         EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4         EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5         EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6         EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7         EP93XX_GPIO_LINE_A(7)
+/* GPIO port B.  */
+#define EP93XX_GPIO_LINE_B(x)           ((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8         EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9         EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10        EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11        EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12        EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13        EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14        EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15        EP93XX_GPIO_LINE_B(7)
+/* GPIO port C.  */
+#define EP93XX_GPIO_LINE_C(x)           ((x) + 16)
+#define EP93XX_GPIO_LINE_ROW0           EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1           EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2           EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3           EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4           EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5           EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6           EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7           EP93XX_GPIO_LINE_C(7)
+/* GPIO port D.  */
+#define EP93XX_GPIO_LINE_D(x)           ((x) + 24)
+#define EP93XX_GPIO_LINE_COL0           EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1           EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2           EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3           EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4           EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5           EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6           EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7           EP93XX_GPIO_LINE_D(7)
+/* GPIO port E.  */
+#define EP93XX_GPIO_LINE_E(x)           ((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED          EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED          EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn          EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n        EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n        EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0         EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1         EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2         EP93XX_GPIO_LINE_E(7)
+/* GPIO port F.  */
+#define EP93XX_GPIO_LINE_F(x)           ((x) + 40)
+#define EP93XX_GPIO_LINE_WP             EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1          EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2          EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1         EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2         EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1            EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY          EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2            EP93XX_GPIO_LINE_F(7)
+/* GPIO port G.  */
+#define EP93XX_GPIO_LINE_G(x)           ((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK          EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT          EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0           EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1           EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12           EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13           EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14           EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15           EP93XX_GPIO_LINE_G(7)
+/* GPIO port H.  */
+#define EP93XX_GPIO_LINE_H(x)           ((x) + 56)
+#define EP93XX_GPIO_LINE_DD0            EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1            EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2            EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3            EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4            EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5            EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6            EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7            EP93XX_GPIO_LINE_H(7)
+#endif
diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h
new file mode 100644
index 000000000000..9b69f454065d
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/hardware.h
@@ -0,0 +1,12 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/hardware.h
+ */
+#include "ep93xx-regs.h"
+#define pcibios_assign_all_busses()     0
+#include "platform.h"
+#include "gesbc9312.h"
+#include "ts72xx.h"
diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h
new file mode 100644
index 000000000000..7b4d25e29060
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/io.h
@@ -0,0 +1,8 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/io.h
+ */
+#define IO_SPACE_LIMIT          0xffffffff
+#define __io(p)                 ((void __iomem *)(p))
+#define __mem_pci(p)            (p)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
new file mode 100644
index 000000000000..9a42f5de9e57
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/irqs.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/irqs.h
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+#define IRQ_EP93XX_COMMRX               2
+#define IRQ_EP93XX_COMMTX               3
+#define IRQ_EP93XX_TIMER1               4
+#define IRQ_EP93XX_TIMER2               5
+#define IRQ_EP93XX_AACINTR              6
+#define IRQ_EP93XX_DMAM2P0              7
+#define IRQ_EP93XX_DMAM2P1              8
+#define IRQ_EP93XX_DMAM2P2              9
+#define IRQ_EP93XX_DMAM2P3              10
+#define IRQ_EP93XX_DMAM2P4              11
+#define IRQ_EP93XX_DMAM2P5              12
+#define IRQ_EP93XX_DMAM2P6              13
+#define IRQ_EP93XX_DMAM2P7              14
+#define IRQ_EP93XX_DMAM2P8              15
+#define IRQ_EP93XX_DMAM2P9              16
+#define IRQ_EP93XX_DMAM2M0              17
+#define IRQ_EP93XX_DMAM2M1              18
+#define IRQ_EP93XX_GPIO0MUX             20
+#define IRQ_EP93XX_GPIO1MUX             21
+#define IRQ_EP93XX_GPIO2MUX             22
+#define IRQ_EP93XX_GPIO3MUX             22
+#define IRQ_EP93XX_UART1RX              23
+#define IRQ_EP93XX_UART1TX              24
+#define IRQ_EP93XX_UART2RX              25
+#define IRQ_EP93XX_UART2TX              26
+#define IRQ_EP93XX_UART3RX              27
+#define IRQ_EP93XX_UART3TX              28
+#define IRQ_EP93XX_KEY                  29
+#define IRQ_EP93XX_TOUCH                30
+#define EP93XX_VIC1_VALID_IRQ_MASK      0x7ffffffc
+#define IRQ_EP93XX_EXT0                 32
+#define IRQ_EP93XX_EXT1                 33
+#define IRQ_EP93XX_EXT2                 34
+#define IRQ_EP93XX_64HZ                 35
+#define IRQ_EP93XX_WATCHDOG             36
+#define IRQ_EP93XX_RTC                  37
+#define IRQ_EP93XX_IRDA                 38
+#define IRQ_EP93XX_ETHERNET             39
+#define IRQ_EP93XX_EXT3                 40
+#define IRQ_EP93XX_PROG                 41
+#define IRQ_EP93XX_1HZ                  42
+#define IRQ_EP93XX_VSYNC                43
+#define IRQ_EP93XX_VIDEO_FIFO           44
+#define IRQ_EP93XX_SSP1RX               45
+#define IRQ_EP93XX_SSP1TX               46
+#define IRQ_EP93XX_GPIO4MUX             47
+#define IRQ_EP93XX_GPIO5MUX             48
+#define IRQ_EP93XX_GPIO6MUX             49
+#define IRQ_EP93XX_GPIO7MUX             50
+#define IRQ_EP93XX_TIMER3               51
+#define IRQ_EP93XX_UART1                52
+#define IRQ_EP93XX_SSP                  53
+#define IRQ_EP93XX_UART2                54
+#define IRQ_EP93XX_UART3                55
+#define IRQ_EP93XX_USB                  56
+#define IRQ_EP93XX_ETHERNET_PME         57
+#define IRQ_EP93XX_DSP                  58
+#define IRQ_EP93XX_GPIO_AB              59
+#define IRQ_EP93XX_SAI                  60
+#define EP93XX_VIC2_VALID_IRQ_MASK      0x1fffffff
+#define IRQ_EP93XX_GPIO(x)              (64 + (x))
+#define NR_EP93XX_IRQS                  IRQ_EP93XX_GPIO(16)
+#define EP93XX_BOARD_IRQ(x)             (NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS               32
+#define NR_IRQS                         (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
+#endif
diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h
new file mode 100644
index 000000000000..4b1a5c7c8363
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/memory.h
@@ -0,0 +1,14 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/memory.h
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+#define PHYS_OFFSET             UL(0x00000000)
+#define __bus_to_virt(x)        __phys_to_virt(x)
+#define __virt_to_bus(x)        __virt_to_phys(x)
+#endif
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
new file mode 100644
index 000000000000..df9cbb6ef660
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/platform.h
@@ -0,0 +1,14 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/platform.h
+ */
+#ifndef __ASSEMBLY__
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
+#endif
diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h
new file mode 100644
index 000000000000..79b718586746
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/system.h
@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/system.h
+ */
+#include <asm/hardware.h>
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+static inline void arch_reset(char mode)
+{
+        u32 devicecfg;
+        local_irq_disable();
+        devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+        __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+        __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+        __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+        __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+        while (1)
+                ;
+}
diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h
new file mode 100644
index 000000000000..4140bddc97e2
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/timex.h
@@ -0,0 +1,5 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/timex.h
+ */
+#define CLOCK_TICK_RATE         983040
diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
new file mode 100644
index 000000000000..412215e77f44
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/ts72xx.h
@@ -0,0 +1,90 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/ts72xx.h
+ */
+/*
+ * TS72xx memory map:
+ *
+ * virt         phys            size
+ * febff000     22000000        4K      model number register
+ * febfe000     22400000        4K      options register
+ * febfd000     22800000        4K      options register #2
+ * febfc000     [67]0000000     4K      NAND data register
+ * febfb000     [67]0400000     4K      NAND control register
+ * febfa000     [67]0800000     4K      NAND busy register
+ */
+#define TS72XX_MODEL_PHYS_BASE          0x22000000
+#define TS72XX_MODEL_VIRT_BASE          0xfebff000
+#define TS72XX_MODEL_SIZE               0x00001000
+#define TS72XX_MODEL_TS7200             0x00
+#define TS72XX_MODEL_TS7250             0x01
+#define TS72XX_MODEL_TS7260             0x02
+#define TS72XX_OPTIONS_PHYS_BASE        0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE        0xfebfe000
+#define TS72XX_OPTIONS_SIZE             0x00001000
+#define TS72XX_OPTIONS_COM2_RS485       0x02
+#define TS72XX_OPTIONS_MAX197           0x01
+#define TS72XX_OPTIONS2_PHYS_BASE       0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE       0xfebfd000
+#define TS72XX_OPTIONS2_SIZE            0x00001000
+#define TS72XX_OPTIONS2_TS9420          0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT     0x02
+#define TS72XX_NOR_PHYS_BASE            0x60000000
+#define TS72XX_NOR2_PHYS_BASE           0x62000000
+#define TS72XX_NAND1_DATA_PHYS_BASE     0x60000000
+#define TS72XX_NAND2_DATA_PHYS_BASE     0x70000000
+#define TS72XX_NAND_DATA_VIRT_BASE      0xfebfc000
+#define TS72XX_NAND_DATA_SIZE           0x00001000
+#define TS72XX_NAND1_CONTROL_PHYS_BASE  0x60400000
+#define TS72XX_NAND2_CONTROL_PHYS_BASE  0x70400000
+#define TS72XX_NAND_CONTROL_VIRT_BASE   0xfebfb000
+#define TS72XX_NAND_CONTROL_SIZE        0x00001000
+#define TS72XX_NAND1_BUSY_PHYS_BASE     0x60800000
+#define TS72XX_NAND2_BUSY_PHYS_BASE     0x70800000
+#define TS72XX_NAND_BUSY_VIRT_BASE      0xfebfa000
+#define TS72XX_NAND_BUSY_SIZE           0x00001000
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+static inline int board_is_ts7200(void)
+{
+        return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+}
+static inline int board_is_ts7250(void)
+{
+        return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+}
+static inline int board_is_ts7260(void)
+{
+        return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+}
+static inline int is_max197_installed(void)
+{
+        return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+                                        TS72XX_OPTIONS_MAX197);
+}
+static inline int is_ts9420_installed(void)
+{
+        return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+                                        TS72XX_OPTIONS2_TS9420);
+}
+#endif
diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h
new file mode 100644
index 000000000000..4410d217077e
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/uncompress.h
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <asm/arch/ep93xx-regs.h>
+static unsigned char __raw_readb(unsigned int ptr)
+{
+        return *((volatile unsigned char *)ptr);
+}
+static void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+        *((volatile unsigned char *)ptr) = value;
+}
+#define PHYS_UART1_DATA         0x808c0000
+#define PHYS_UART1_FLAG         0x808c0018
+#define UART1_FLAG_TXFF         0x20
+static __inline__ void putc(char c)
+{
+        int i;
+        for (i = 0; i < 1000; i++) {
+                /* Transmit fifo not full?  */
+                if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+                        break;
+        }
+        __raw_writeb(c, PHYS_UART1_DATA);
+}
+static void putstr(const char *s)
+{
+        while (*s) {
+                putc(*s);
+                if (*s == '\n')
+                        putc('\r');
+                s++;
+        }
+}
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h
new file mode 100644
index 000000000000..205ea6b1cf5e
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/vmalloc.h
+ */
+#define VMALLOC_END     0xfe800000
diff --git a/include/asm-arm/arch-h720x/irq.h b/include/asm-arm/arch-h720x/irq.h
deleted file mode 100644
index b3821e957aa4..000000000000
--- a/include/asm-arm/arch-h720x/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-h720x/irq.h
- *
- * Copyright (C) 2000-2002 Jungjun Kim
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- */
-#ifndef __ASM_ARCH_IRQ_H
-#define __ASM_ARCH_IRQ_H
-extern void __init h720x_init_irq (void);
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-h720x/param.h b/include/asm-arm/arch-h720x/param.h
deleted file mode 100644
index 2b80235f9847..000000000000
--- a/include/asm-arm/arch-h720x/param.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/param.h
- *
- * Copyright (C) 2000 Jungjun Kim
- */
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-#endif
diff --git a/include/asm-arm/arch-imx/irq.h b/include/asm-arm/arch-imx/irq.h
deleted file mode 100644
index 545e065d2325..000000000000
--- a/include/asm-arm/arch-imx/irq.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/irq.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define fixup_irq(i)    (i)
diff --git a/include/asm-arm/arch-imx/param.h b/include/asm-arm/arch-imx/param.h
deleted file mode 100644
index 7c724f03333e..000000000000
--- a/include/asm-arm/arch-imx/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
index 031d30941791..85b327c352df 100644
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ b/include/asm-arm/arch-integrator/debug-macro.S
@@ -11,8 +11,6 @@
 *
 */
-#include <linux/amba/serial.h>
                .macro  addruart,rx
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
@@ -21,18 +19,4 @@
                addne   \rx, \rx, #0x16000000 >> 4
                .endm
-                .macro  senduart,rd,rx
+#include <asm/hardware/debug-pl01x.S>
-                strb    \rd, [\rx, #UART01x_DR]
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldr     \rd, [\rx, #0x18]       @ UARTFLG
-                tst     \rd, #1 << 5            @ UARTFLGUTXFF - 1 when full
-                bne     1001b
-                .endm
-                .macro  busyuart,rd,rx
-1001:           ldr     \rd, [\rx, #0x18]       @ UARTFLG
-                tst     \rd, #1 << 3            @ UARTFLGUBUSY - 1 when busy
-                bne     1001b
-                .endm
diff --git a/include/asm-arm/arch-integrator/param.h b/include/asm-arm/arch-integrator/param.h
deleted file mode 100644
index afa582ff3717..000000000000
--- a/include/asm-arm/arch-integrator/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-iop3xx/debug-macro.S b/include/asm-arm/arch-iop3xx/debug-macro.S
index cc15f80ebd9a..ce007e531994 100644
--- a/include/asm-arm/arch-iop3xx/debug-macro.S
+++ b/include/asm-arm/arch-iop3xx/debug-macro.S
@@ -28,21 +28,8 @@
 #endif
                .endm
-                .macro  senduart,rd,rx
-                strb    \rd, [\rx]
-                .endm
-                .macro  busyuart,rd,rx
-1002:           ldrb    \rd, [\rx, #0x5]
-                and     \rd, \rd, #0x60
-                teq     \rd, #0x60
-                bne     1002b
-                .endm
-                .macro  waituart,rd,rx
 #if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331)
-1001:           ldrb    \rd, [\rx, #0x6]
+#define FLOW_CONTROL
-                tst     \rd, #0x10
-                beq     1001b
 #endif
-                .endm
+#define UART_SHIFT      0
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop3xx/param.h b/include/asm-arm/arch-iop3xx/param.h
deleted file mode 100644
index acf404e87358..000000000000
--- a/include/asm-arm/arch-iop3xx/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-iop3xx/param.h
- */
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S
index 5631e0889861..bc8b39654793 100644
--- a/include/asm-arm/arch-ixp2000/debug-macro.S
+++ b/include/asm-arm/arch-ixp2000/debug-macro.S
@@ -23,18 +23,5 @@
 #endif
                .endm
-                .macro  senduart,rd,rx
+#define UART_SHIFT      2
-                strb    \rd, [\rx]
+#include <asm/hardware/debug-8250.S>
-                .endm
-                .macro  busyuart,rd,rx
-1002:           ldrb    \rd, [\rx, #0x14]
-                tst     \rd, #0x20
-                beq     1002b
-                .endm
-                .macro  waituart,rd,rx
-                nop
-                nop
-                nop
-                .endm
diff --git a/include/asm-arm/arch-ixp2000/irq.h b/include/asm-arm/arch-ixp2000/irq.h
deleted file mode 100644
index ba00b23f9828..000000000000
--- a/include/asm-arm/arch-ixp2000/irq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ixp2000/irq.h
- *
- *  Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define fixup_irq(irq)  (irq)
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h
index 229381c64283..546e2e8e27b8 100644
--- a/include/asm-arm/arch-ixp2000/ixdp2x00.h
+++ b/include/asm-arm/arch-ixp2000/ixdp2x00.h
@@ -72,12 +72,11 @@
 #ifndef __ASSEMBLY__
 /*
- * Master NPU will always have flash and be PCI master.
+ * The master NPU is always PCI master.
- * Slave NPU may or may not have flash but will never be PCI master.
 */
 static inline unsigned int ixdp2x00_master_npu(void)
 {
-        return ((ixp2000_has_flash()) && (ixp2000_is_pcimaster()));
+        return !!ixp2000_is_pcimaster();
 }
 /*
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index 2b57f91b4ebd..ccae4bec92c5 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -353,8 +353,8 @@
 * Masks and shifts for various fields in the WTC and RTC registers.
 */
 #define SLOWPORT_WRTC_MASK_HD           0x0003
-#define SLOWPORT_WRTC_MASK_SU           0x003c
+#define SLOWPORT_WRTC_MASK_PW           0x003c
-#define SLOWPORT_WRTC_MASK_PW           0x03c0
+#define SLOWPORT_WRTC_MASK_SU           0x03c0
 #define SLOWPORT_WRTC_SHIFT_HD          0x00
 #define SLOWPORT_WRTC_SHIFT_SU          0x02
diff --git a/include/asm-arm/arch-ixp2000/param.h b/include/asm-arm/arch-ixp2000/param.h
deleted file mode 100644
index 2646d9e5919d..000000000000
--- a/include/asm-arm/arch-ixp2000/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ixp2000/param.h
- */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
index ddbbb34b5f95..3cc9a04f68cb 100644
--- a/include/asm-arm/arch-ixp2000/system.h
+++ b/include/asm-arm/arch-ixp2000/system.h
@@ -37,7 +37,7 @@ static inline void arch_reset(char mode)
         * to cause a complete reset of the CPU and all external devices
         * and move the flash bank register back to 0.
         */
-        if (machine_is_ixdp2801()) {
+        if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
                unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
                reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
index 2e23651e217f..37bc8ef23e67 100644
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -20,16 +20,5 @@
                                                @ byte writes used - Big Endian.
                .endm
-               .macro  senduart,rd,rx
+#define UART_SHIFT      2
-                strb    \rd, [\rx]
+#include <asm/hardware/debug-8250.S>
-                .endm
-                .macro  waituart,rd,rx
-1002:           ldrb    \rd, [\rx, #0x14]
-                and     \rd, \rd, #0x60         @ check THRE and TEMT bits
-                teq     \rd, #0x60
-                bne     1002b
-                .endm
-                .macro  busyuart,rd,rx
-                .endm
diff --git a/include/asm-arm/arch-ixp4xx/irq.h b/include/asm-arm/arch-ixp4xx/irq.h
deleted file mode 100644
index 87da70695f0a..000000000000
--- a/include/asm-arm/arch-ixp4xx/irq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * irq.h 
- *
- *  Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#define fixup_irq(irq)  (irq)
diff --git a/include/asm-arm/arch-ixp4xx/param.h b/include/asm-arm/arch-ixp4xx/param.h
deleted file mode 100644
index 8a757125e5e7..000000000000
--- a/include/asm-arm/arch-ixp4xx/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/param.h
- */
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
index daf9790645ca..13aee17b0475 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -38,6 +38,33 @@ extern unsigned long ixp4xx_exp_bus_size;
 #define IXP4XX_EXP_BUS_BASE(region)\
                (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
+#define IXP4XX_EXP_BUS_END(region)\
+                (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
+/* Those macros can be used to adjust timing and configure
+ * other features for each region.
+ */
+#define IXP4XX_EXP_BUS_RECOVERY_T(x)    (((x) & 0x0f) << 16)
+#define IXP4XX_EXP_BUS_HOLD_T(x)        (((x) & 0x03) << 20)
+#define IXP4XX_EXP_BUS_STROBE_T(x)      (((x) & 0x0f) << 22)
+#define IXP4XX_EXP_BUS_SETUP_T(x)       (((x) & 0x03) << 26)
+#define IXP4XX_EXP_BUS_ADDR_T(x)        (((x) & 0x03) << 28)
+#define IXP4XX_EXP_BUS_SIZE(x)          (((x) & 0x0f) << 10)
+#define IXP4XX_EXP_BUS_CYCLES(x)        (((x) & 0x03) << 14)
+#define IXP4XX_EXP_BUS_CS_EN            (1L << 31)
+#define IXP4XX_EXP_BUS_BYTE_RD16        (1L << 6)
+#define IXP4XX_EXP_BUS_HRDY_POL         (1L << 5)
+#define IXP4XX_EXP_BUS_MUX_EN           (1L << 4)
+#define IXP4XX_EXP_BUS_SPLT_EN          (1L << 3)
+#define IXP4XX_EXP_BUS_WR_EN            (1L << 1)
+#define IXP4XX_EXP_BUS_BYTE_EN          (1L << 0)
+#define IXP4XX_EXP_BUS_CYCLES_INTEL     0x00
+#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA  0x01
+#define IXP4XX_EXP_BUS_CYCLES_HPI       0x02
 #define IXP4XX_FLASH_WRITABLE   (0x2)
 #define IXP4XX_FLASH_DEFAULT    (0xbcd23c40)
 #define IXP4XX_FLASH_WRITE      (0xbcd23c42)
diff --git a/include/asm-arm/arch-l7200/param.h b/include/asm-arm/arch-l7200/param.h
deleted file mode 100644
index 9962a12ab158..000000000000
--- a/include/asm-arm/arch-l7200/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-l7200/param.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   04-21-2000 RS      Created L7200 version
- *   04-25-2000 SJH     Cleaned up file
- *   05-03-2000 SJH     Change comments and rate
- */
-/*
- * See 'time.h' for how the RTC HZ rate is set
- */
-#define HZ 128
diff --git a/include/asm-arm/arch-lh7a40x/irq.h b/include/asm-arm/arch-lh7a40x/irq.h
deleted file mode 100644
index 0f5f0b10f6ca..000000000000
--- a/include/asm-arm/arch-lh7a40x/irq.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/irq.h
- *
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-void __init lh7a40x_init_board_irq (void);
diff --git a/include/asm-arm/arch-lh7a40x/param.h b/include/asm-arm/arch-lh7a40x/param.h
deleted file mode 100644
index acad0bc5deba..000000000000
--- a/include/asm-arm/arch-lh7a40x/param.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/param.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
deleted file mode 100644
index face9ad41e97..000000000000
--- a/include/asm-arm/arch-omap/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/param.h
- *
- */
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ      CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
index b6ec68879176..9012cbc0ad8b 100644
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ b/include/asm-arm/arch-pxa/debug-macro.S
@@ -21,18 +21,5 @@
                orr     \rx, \rx, #0x00100000
                .endm
-                .macro  senduart,rd,rx
+#define UART_SHIFT      2
-                str     \rd, [\rx, #0]
+#include <asm/hardware/debug-8250.S>
-                .endm
-                .macro  busyuart,rd,rx
-1002:           ldr     \rd, [\rx, #0x14]
-                tst     \rd, #(1 << 6)
-                beq     1002b
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldr     \rd, [\rx, #0x14]
-                tst     \rd, #(1 << 5)
-                beq     1001b
-                .endm
diff --git a/include/asm-arm/arch-pxa/irq.h b/include/asm-arm/arch-pxa/irq.h
deleted file mode 100644
index 48c60f5eff6a..000000000000
--- a/include/asm-arm/arch-pxa/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/irq.h
- *
- * Author:      Nicolas Pitre
- * Created:     Jun 15, 2001
- * Copyright:   MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define fixup_irq(x)    (x)
diff --git a/include/asm-arm/arch-pxa/param.h b/include/asm-arm/arch-pxa/param.h
deleted file mode 100644
index 3197d82d7573..000000000000
--- a/include/asm-arm/arch-pxa/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/param.h
- */
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
index 017ad996848d..f17efc65518a 100644
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ b/include/asm-arm/arch-realview/debug-macro.S
@@ -11,8 +11,6 @@
 *
 */
-#include <linux/amba/serial.h>
                .macro  addruart,rx
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
@@ -21,18 +19,4 @@
                orr     \rx, \rx, #0x00009000
                .endm
-                .macro  senduart,rd,rx
+#include <asm/hardware/debug-pl01x.S>
-                strb    \rd, [\rx, #UART01x_DR]
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldr     \rd, [\rx, #0x18]       @ UARTFLG
-                tst     \rd, #1 << 5            @ UARTFLGUTXFF - 1 when full
-                bne     1001b
-                .endm
-                .macro  busyuart,rd,rx
-1001:           ldr     \rd, [\rx, #0x18]       @ UARTFLG
-                tst     \rd, #1 << 3            @ UARTFLGUBUSY - 1 when busy
-                bne     1001b
-                .endm
diff --git a/include/asm-arm/arch-realview/param.h b/include/asm-arm/arch-realview/param.h
deleted file mode 100644
index 89b1235d32bd..000000000000
--- a/include/asm-arm/arch-realview/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/param.h
- *
- *  Copyright (C) 2002 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S
index 456d3d754c3d..c634c8d8f4a1 100644
--- a/include/asm-arm/arch-rpc/debug-macro.S
+++ b/include/asm-arm/arch-rpc/debug-macro.S
@@ -20,19 +20,6 @@
                orr     \rx, \rx, #0x00000fe0
                .endm
-                .macro  senduart,rd,rx
+#define UART_SHIFT      2
-                strb    \rd, [\rx]
+#define FLOW_CONTROL
-                .endm
+#include <asm/hardware/debug-8250.S>
-                .macro  busyuart,rd,rx
-1001:           ldrb    \rd, [\rx, #0x14]
-                and     \rd, \rd, #0x60
-                teq     \rd, #0x60
-                bne     1001b
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldrb    \rd, [\rx, #0x18]
-                tst     \rd, #0x10
-                beq     1001b
-                .endm
diff --git a/include/asm-arm/arch-rpc/param.h b/include/asm-arm/arch-rpc/param.h
deleted file mode 100644
index 721dcd658858..000000000000
--- a/include/asm-arm/arch-rpc/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/param.h
- */
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h
new file mode 100644
index 000000000000..e9d1ae1f354f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/osiris-cpld.h
@@ -0,0 +1,25 @@
+/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
+ *
+ * (c) 2005 Simtec Electronics
+ *      http://www.simtec.co.uk/products/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_OSIRISCPLD_H
+#define __ASM_ARCH_OSIRISCPLD_H
+/* CTRL1 - NAND WP control */
+#define OSIRIS_CTRL1_NANDSEL            (0x3)
+#define OSIRIS_CTRL1_BOOT_INT           (1<<3)
+#define OSIRIS_CTRL1_PCMCIA             (1<<4)
+#define OSIRIS_CTRL1_PCMCIA_nWAIT       (1<<6)
+#define OSIRIS_CTRL1_PCMCIA_nIOIS16     (1<<7)
+#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h
new file mode 100644
index 000000000000..7c4b0cd2d14d
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/osiris-map.h
@@ -0,0 +1,41 @@
+/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
+ *
+ * (c) 2005 Simtec Electronics
+ *      http://www.simtec.co.uk/products/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+*/
+/* needs arch/map.h including with this */
+#ifndef __ASM_ARCH_OSIRISMAP_H
+#define __ASM_ARCH_OSIRISMAP_H
+/* start peripherals off after the S3C2410 */
+#define OSIRIS_IOADDR(x)        (S3C2410_ADDR((x) + 0x05000000))
+#define OSIRIS_PA_CPLD          (S3C2410_CS1 | (3<<25))
+/* we put the CPLD registers next, to get them out of the way */
+#define OSIRIS_VA_CTRL1     OSIRIS_IOADDR(0x00000000)    /* 0x01300000 */
+#define OSIRIS_PA_CTRL1     (OSIRIS_PA_CPLD)
+#define OSIRIS_VA_CTRL2     OSIRIS_IOADDR(0x00100000)    /* 0x01400000 */
+#define OSIRIS_PA_CTRL2     (OSIRIS_PA_CPLD + (1<<24))
+#define OSIRIS_VA_CTRL3     OSIRIS_IOADDR(0x00200000)    /* 0x01500000 */
+#define OSIRIS_PA_CTRL3     (OSIRIS_PA_CPLD + (2<<24))
+#define OSIRIS_VA_CTRL4     OSIRIS_IOADDR(0x00300000)    /* 0x01600000 */
+#define OSIRIS_PA_CTRL4     (OSIRIS_PA_CPLD + (3<<24))
+#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/param.h b/include/asm-arm/arch-s3c2410/param.h
deleted file mode 100644
index 483d3f149883..000000000000
--- a/include/asm-arm/arch-s3c2410/param.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/param.h
- *
- * (c) 2003 Simtec Electronics
- *  Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Machine parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- *  02-Sep-2003 BJD  Created file
- *  12-Mar-2004 BJD  Added include protection
-*/
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-/* we cannot get our timer down to 100Hz with the setup as is, but we can
- * manage 200 clock ticks per second... if this is a problem, we can always
- * add a software pre-scaler to the evil timer systems.
-*/
-#define HZ   200
-#endif /* __ASM_ARCH_PARAM_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 9697f93afe74..d2574084697f 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -979,6 +979,7 @@
 #define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
 #define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
 #define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
 #define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
 #define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
@@ -986,6 +987,7 @@
 #define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
 #define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
 #define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
 #define S3C2410_MISCCR_USBSUSPND0   (1<<12)
 #define S3C2410_MISCCR_USBSUSPND1   (1<<13)
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S
index 755fa3453862..267c317a7408 100644
--- a/include/asm-arm/arch-sa1100/debug-macro.S
+++ b/include/asm-arm/arch-sa1100/debug-macro.S
@@ -10,6 +10,7 @@
 * published by the Free Software Foundation.
 *
 */
+#include <asm/hardware.h>
                .macro  addruart,rx
                mrc     p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-sa1100/param.h b/include/asm-arm/arch-sa1100/param.h
deleted file mode 100644
index 867488909ecd..000000000000
--- a/include/asm-arm/arch-sa1100/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-sa1100/param.h
- */
diff --git a/include/asm-arm/arch-shark/param.h b/include/asm-arm/arch-shark/param.h
deleted file mode 100644
index 997eeb71de00..000000000000
--- a/include/asm-arm/arch-shark/param.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-shark/param.h
- *
- * by Alexander Schulz
- */
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
index ef6167116dbb..fe106d184e62 100644
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ b/include/asm-arm/arch-versatile/debug-macro.S
@@ -11,8 +11,6 @@
 *
 */
-#include <linux/amba/serial.h>
                .macro  addruart,rx
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
@@ -22,18 +20,4 @@
                orr     \rx, \rx, #0x00001000
                .endm
-                .macro  senduart,rd,rx
+#include <asm/hardware/debug-pl01x.S>
-                strb    \rd, [\rx, #UART01x_DR]
-                .endm
-                .macro  waituart,rd,rx
-1001:           ldr     \rd, [\rx, #0x18]       @ UARTFLG
-                tst     \rd, #1 << 5            @ UARTFLGUTXFF - 1 when full
-                bne     1001b
-                .endm
-                .macro  busyuart,rd,rx
-1001:           ldr     \rd, [\rx, #0x18]       @ UARTFLG
-                tst     \rd, #1 << 3            @ UARTFLGUBUSY - 1 when busy
-                bne     1001b
-                .endm
diff --git a/include/asm-arm/arch-versatile/param.h b/include/asm-arm/arch-versatile/param.h
deleted file mode 100644
index 34b897335f87..000000000000
--- a/include/asm-arm/arch-versatile/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/param.h
- *
- *  Copyright (C) 2002 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/delay.h b/include/asm-arm/delay.h
index 1704360e9699..b2deda181549 100644
--- a/include/asm-arm/delay.h
+++ b/include/asm-arm/delay.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_DELAY_H
 #define __ASM_ARM_DELAY_H
+#include <asm/param.h>  /* HZ */
 extern void __delay(int loops);
 /*
@@ -13,7 +15,7 @@ extern void __delay(int loops);
 * it, it means that you're calling udelay() with an out of range value.
 *
 * With currently imposed limits, this means that we support a max delay
- * of 2000us and 671 bogomips
+ * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
 */
 extern void __bad_udelay(void);
@@ -32,10 +34,10 @@ extern void __const_udelay(unsigned long);
 #define MAX_UDELAY_MS 2
-#define udelay(n)                                               \
+#define udelay(n)                                                       \
-        (__builtin_constant_p(n) ?                              \
+        (__builtin_constant_p(n) ?                                      \
-          ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :      \
+          ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :              \
-                        __const_udelay((n) * 0x68dbul)) :       \
+                        __const_udelay((n) * ((2199023U*HZ)>>11))) :    \
          __udelay(n))
 #endif /* defined(_ARM_DELAY_H) */
diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S
new file mode 100644
index 000000000000..4594fea91ec1
--- /dev/null
+++ b/include/asm-arm/hardware/debug-8250.S
@@ -0,0 +1,29 @@
+/*
+ * linux/include/asm-arm/hardware/debug-8250.h
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/serial_reg.h>
+                .macro  senduart,rd,rx
+                strb    \rd, [\rx, #UART_TX << UART_SHIFT]
+                .endm
+                .macro  busyuart,rd,rx
+1002:           ldrb    \rd, [\rx, #UART_LSR << UART_SHIFT]
+                and     \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                teq     \rd, #UART_LSR_TEMT | UART_LSR_THRE
+                bne     1002b
+                .endm
+                .macro  waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:           ldrb    \rd, [\rx, #UART_MSR << UART_SHIFT]
+                tst     \rd, #UART_MSR_CTS
+                beq     1001b
+#endif
+                .endm
diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S
new file mode 100644
index 000000000000..db0d0f7de5e9
--- /dev/null
+++ b/include/asm-arm/hardware/debug-pl01x.S
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-integrator/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <linux/amba/serial.h>
+                .macro  senduart,rd,rx
+                strb    \rd, [\rx, #UART01x_DR]
+                .endm
+                .macro  waituart,rd,rx
+1001:           ldr     \rd, [\rx, #UART01x_FR]
+                tst     \rd, #UART01x_FR_TXFF
+                bne     1001b
+                .endm
+                .macro  busyuart,rd,rx
+1001:           ldr     \rd, [\rx, #UART01x_FR]
+                tst     \rd, #UART01x_FR_BUSY
+                bne     1001b
+                .endm
diff --git a/include/asm-arm/arch-ixp2000/uengine.h b/include/asm-arm/hardware/uengine.h
index b442d65c6593..b442d65c6593 100644
--- a/include/asm-arm/arch-ixp2000/uengine.h
+++ b/include/asm-arm/hardware/uengine.h
diff --git a/include/asm-arm/hardware/vic.h b/include/asm-arm/hardware/vic.h
index 81825eb54c9e..ed9ca3736a0b 100644
--- a/include/asm-arm/hardware/vic.h
+++ b/include/asm-arm/hardware/vic.h
@@ -39,7 +39,7 @@
 #define VIC_VECT_CNTL_ENABLE            (1 << 5)
 #ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
 #endif
 #endif
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
index 2cd57b4d64d9..fd2f9bf4dcc6 100644
--- a/include/asm-arm/mach/arch.h
+++ b/include/asm-arm/mach/arch.h
@@ -10,19 +10,16 @@
 #ifndef __ASSEMBLY__
-#include <linux/compiler.h>
 struct tag;
 struct meminfo;
 struct sys_timer;
 struct machine_desc {
        /*
-         * Note! The first five elements are used
+         * Note! The first four elements are used
         * by assembler code in head-armv.S
         */
        unsigned int            nr;             /* architecture number  */
-        unsigned int __deprecated phys_ram;     /* start of physical ram */
        unsigned int            phys_io;        /* start of physical io */
        unsigned int            io_pg_offst;    /* byte offset for io 
                                                 * page tabe entry      */
diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h
index 0ce6ca588d8c..d4d420ecf3a8 100644
--- a/include/asm-arm/mach/irq.h
+++ b/include/asm-arm/mach/irq.h
@@ -61,7 +61,7 @@ struct irqdesc {
        struct irqchip  *chip;
        struct irqaction *action;
        struct list_head pend;
-        void            *chipdata;
+        void __iomem    *base;
        void            *data;
        unsigned int    disable_depth;
@@ -74,6 +74,7 @@ struct irqdesc {
        unsigned int    noautoenable : 1;       /* don't automatically enable IRQ */
        unsigned int    unused   :25;
+        unsigned int    irqs_unhandled;
        struct proc_dir_entry *procdir;
 #ifdef CONFIG_SMP
@@ -113,8 +114,8 @@ void __set_irq_handler(unsigned int irq, irq_handler_t, int);
 #define set_irq_handler(irq,handler)            __set_irq_handler(irq,handler,0)
 #define set_irq_chained_handler(irq,handler)    __set_irq_handler(irq,handler,1)
 #define set_irq_data(irq,d)                     do { irq_desc[irq].data = d; } while (0)
-#define set_irq_chipdata(irq,d)                 do { irq_desc[irq].chipdata = d; } while (0)
+#define set_irq_chipdata(irq,d)                 do { irq_desc[irq].base = d; } while (0)
-#define get_irq_chipdata(irq)                   (irq_desc[irq].chipdata)
+#define get_irq_chipdata(irq)                   (irq_desc[irq].base)
 void set_irq_chip(unsigned int irq, struct irqchip *);
 void set_irq_flags(unsigned int irq, unsigned int flags);
diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h
index 94223d4d7e88..15806468ba72 100644
--- a/include/asm-arm/param.h
+++ b/include/asm-arm/param.h
@@ -11,12 +11,7 @@
 #define __ASM_PARAM_H
 #ifdef __KERNEL__
-# include <asm/arch/param.h>            /* for kernel version of HZ */
+# define HZ             CONFIG_HZ       /* Internal kernel timer frequency */
-# ifndef HZ
-#  define HZ            100             /* Internal kernel timer frequency */
-# endif
 # define USER_HZ        100             /* User interfaces are in "ticks" */
 # define CLOCKS_PER_SEC (USER_HZ)       /* like times() */
 #else
diff --git a/include/linux/ata.h b/include/linux/ata.h
index b02a16c435e7..312a2c0c64e6 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -146,6 +146,8 @@ enum {
        ATA_CMD_STANDBYNOW1     = 0xE0,
        ATA_CMD_IDLEIMMEDIATE   = 0xE1,
        ATA_CMD_INIT_DEV_PARAMS = 0x91,
+        ATA_CMD_READ_NATIVE_MAX = 0xF8,
+        ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
        /* SETFEATURES stuff */
        SETFEATURES_XFER        = 0x03,
@@ -204,7 +206,6 @@ enum ata_tf_protocols {
        ATA_PROT_UNKNOWN,       /* unknown/invalid */
        ATA_PROT_NODATA,        /* no data */
        ATA_PROT_PIO,           /* PIO single sector */
-        ATA_PROT_PIO_MULT,      /* PIO multiple sector */
        ATA_PROT_DMA,           /* DMA */
        ATA_PROT_ATAPI,         /* packet command, PIO data xfer*/
        ATA_PROT_ATAPI_NODATA,  /* packet command, no data */
@@ -247,18 +248,22 @@ struct ata_taskfile {
 };
 #define ata_id_is_ata(id)       (((id)[0] & (1 << 15)) == 0)
+#define ata_id_is_cfa(id)       ((id)[0] == 0x848A)
 #define ata_id_is_sata(id)      ((id)[93] == 0)
 #define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
 #define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
+#define ata_id_hpa_enabled(id)  ((id)[85] & (1 << 10))
 #define ata_id_has_fua(id)      ((id)[84] & (1 << 6))
 #define ata_id_has_flush(id)    ((id)[83] & (1 << 12))
 #define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13))
 #define ata_id_has_lba48(id)    ((id)[83] & (1 << 10))
+#define ata_id_has_hpa(id)      ((id)[82] & (1 << 10))
 #define ata_id_has_wcache(id)   ((id)[82] & (1 << 5))
 #define ata_id_has_pm(id)       ((id)[82] & (1 << 3))
 #define ata_id_has_lba(id)      ((id)[49] & (1 << 9))
 #define ata_id_has_dma(id)      ((id)[49] & (1 << 8))
 #define ata_id_removeable(id)   ((id)[0] & (1 << 7))
+#define ata_id_has_dword_io(id) ((id)[50] & (1 << 0))
 #define ata_id_u32(id,n)        \
        (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
 #define ata_id_u64(id,n)        \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 204c37a55f06..7a54244d30aa 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -502,6 +502,7 @@ extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_i
 extern void ata_pci_remove_one (struct pci_dev *pdev);
 extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state);
 extern int ata_pci_device_resume(struct pci_dev *pdev);
+extern int ata_pci_clear_simplex(struct pci_dev *pdev);
 #endif /* CONFIG_PCI */
 extern int ata_device_add(const struct ata_probe_ent *ent);
 extern void ata_host_set_remove(struct ata_host_set *host_set);
@@ -542,6 +543,7 @@ extern void ata_port_stop (struct ata_port *ap);
 extern void ata_host_stop (struct ata_host_set *host_set);
 extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
 extern void ata_qc_prep(struct ata_queued_cmd *qc);
+extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
 extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);
 extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf,
                unsigned int buflen);
@@ -608,7 +610,7 @@ extern void ata_pci_host_stop (struct ata_host_set *host_set);
 extern struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
 extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
+extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long);
 #endif /* CONFIG_PCI */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 57abcea1cb5d..c32e60e79dea 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -369,6 +369,9 @@ void uart_parse_options(char *options, int *baud, int *parity, int *bits,
 int uart_set_options(struct uart_port *port, struct console *co, int baud,
                     int parity, int bits, int flow);
 struct tty_driver *uart_console_device(struct console *co, int *index);
+void uart_console_write(struct uart_port *port, const char *s,
+                        unsigned int count,
+                        void (*putchar)(struct uart_port *, int));
 /*
 * Port/driver registration/removal