aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/i2c/busses/i2c-viapro4
-rw-r--r--arch/mips/configs/bigsur_defconfig2
-rw-r--r--arch/mips/configs/mtx1_defconfig2
-rw-r--r--arch/powerpc/configs/ppc6xx_defconfig2
-rw-r--r--drivers/i2c/busses/Kconfig6
-rw-r--r--drivers/i2c/busses/i2c-viapro.c4
-rw-r--r--drivers/i2c/busses/i2c-voodoo3.c1
-rw-r--r--drivers/i2c/chips/Kconfig15
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/i2c-core.c43
-rw-r--r--drivers/macintosh/therm_adt746x.c84
-rw-r--r--drivers/macintosh/therm_pm72.c95
-rw-r--r--drivers/macintosh/therm_windtunnel.c126
-rw-r--r--drivers/macintosh/windfarm_lm75_sensor.c129
-rw-r--r--drivers/macintosh/windfarm_max6690_sensor.c103
-rw-r--r--drivers/macintosh/windfarm_smu_sat.c109
-rw-r--r--drivers/misc/eeprom/Kconfig14
-rw-r--r--drivers/misc/eeprom/Makefile1
-rw-r--r--drivers/misc/eeprom/max6875.c (renamed from drivers/i2c/chips/max6875.c)2
-rw-r--r--drivers/video/tdfxfb.c1
20 files changed, 403 insertions, 341 deletions
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 22efedf60c87..2e758b0e9456 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -19,6 +19,9 @@ Supported adapters:
19 * VIA Technologies, Inc. VX800/VX820 19 * VIA Technologies, Inc. VX800/VX820
20 Datasheet: available on http://linux.via.com.tw 20 Datasheet: available on http://linux.via.com.tw
21 21
22 * VIA Technologies, Inc. VX855/VX875
23 Datasheet: Availability unknown
24
22Authors: 25Authors:
23 Kyösti Mälkki <kmalkki@cc.hut.fi>, 26 Kyösti Mälkki <kmalkki@cc.hut.fi>,
24 Mark D. Studebaker <mdsxyz123@yahoo.com>, 27 Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -53,6 +56,7 @@ Your lspci -n listing must show one of these :
53 device 1106:3287 (VT8251) 56 device 1106:3287 (VT8251)
54 device 1106:8324 (CX700) 57 device 1106:8324 (CX700)
55 device 1106:8353 (VX800/VX820) 58 device 1106:8353 (VX800/VX820)
59 device 1106:8409 (VX855/VX875)
56 60
57If none of these show up, you should look in the BIOS for settings like 61If none of these show up, you should look in the BIOS for settings like
58enable ACPI / SMBus or even USB. 62enable ACPI / SMBus or even USB.
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 783da855a2e3..d6d35b2e5fe8 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -963,7 +963,7 @@ CONFIG_EEPROM_LEGACY=y
963CONFIG_SENSORS_PCF8574=y 963CONFIG_SENSORS_PCF8574=y
964# CONFIG_PCF8575 is not set 964# CONFIG_PCF8575 is not set
965CONFIG_SENSORS_PCF8591=y 965CONFIG_SENSORS_PCF8591=y
966CONFIG_SENSORS_MAX6875=y 966CONFIG_EEPROM_MAX6875=y
967# CONFIG_SENSORS_TSL2550 is not set 967# CONFIG_SENSORS_TSL2550 is not set
968CONFIG_I2C_DEBUG_CORE=y 968CONFIG_I2C_DEBUG_CORE=y
969CONFIG_I2C_DEBUG_ALGO=y 969CONFIG_I2C_DEBUG_ALGO=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 8426d3b9501c..fadb351d249b 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1849,7 +1849,7 @@ CONFIG_EEPROM_LEGACY=m
1849CONFIG_SENSORS_PCF8574=m 1849CONFIG_SENSORS_PCF8574=m
1850CONFIG_SENSORS_PCA9539=m 1850CONFIG_SENSORS_PCA9539=m
1851CONFIG_SENSORS_PCF8591=m 1851CONFIG_SENSORS_PCF8591=m
1852CONFIG_SENSORS_MAX6875=m 1852CONFIG_EEPROM_MAX6875=m
1853# CONFIG_SENSORS_TSL2550 is not set 1853# CONFIG_SENSORS_TSL2550 is not set
1854# CONFIG_I2C_DEBUG_CORE is not set 1854# CONFIG_I2C_DEBUG_CORE is not set
1855# CONFIG_I2C_DEBUG_ALGO is not set 1855# CONFIG_I2C_DEBUG_ALGO is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 7d044dfd9236..12dc7c409616 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1808,7 +1808,7 @@ CONFIG_PCF8575=m
1808CONFIG_SENSORS_PCA9539=m 1808CONFIG_SENSORS_PCA9539=m
1809CONFIG_SENSORS_PCF8591=m 1809CONFIG_SENSORS_PCF8591=m
1810# CONFIG_TPS65010 is not set 1810# CONFIG_TPS65010 is not set
1811CONFIG_SENSORS_MAX6875=m 1811CONFIG_EEPROM_MAX6875=m
1812CONFIG_SENSORS_TSL2550=m 1812CONFIG_SENSORS_TSL2550=m
1813CONFIG_MCU_MPC8349EMITX=m 1813CONFIG_MCU_MPC8349EMITX=m
1814# CONFIG_I2C_DEBUG_CORE is not set 1814# CONFIG_I2C_DEBUG_CORE is not set
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c8460fa9cfac..0d04d3ebfc2d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -211,7 +211,7 @@ config I2C_VIA
211 will be called i2c-via. 211 will be called i2c-via.
212 212
213config I2C_VIAPRO 213config I2C_VIAPRO
214 tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820" 214 tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx"
215 depends on PCI 215 depends on PCI
216 help 216 help
217 If you say yes to this option, support will be included for the VIA 217 If you say yes to this option, support will be included for the VIA
@@ -225,8 +225,8 @@ config I2C_VIAPRO
225 VT8237R/A/S 225 VT8237R/A/S
226 VT8251 226 VT8251
227 CX700 227 CX700
228 VX800 228 VX800/VX820
229 VX820 229 VX855/VX875
230 230
231 This driver can also be built as a module. If so, the module 231 This driver can also be built as a module. If so, the module
232 will be called i2c-viapro. 232 will be called i2c-viapro.
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 02e6f724b05f..54d810a4d00f 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -37,6 +37,7 @@
37 VT8251 0x3287 yes 37 VT8251 0x3287 yes
38 CX700 0x8324 yes 38 CX700 0x8324 yes
39 VX800/VX820 0x8353 yes 39 VX800/VX820 0x8353 yes
40 VX855/VX875 0x8409 yes
40 41
41 Note: we assume there can only be one device, with one SMBus interface. 42 Note: we assume there can only be one device, with one SMBus interface.
42*/ 43*/
@@ -404,6 +405,7 @@ found:
404 switch (pdev->device) { 405 switch (pdev->device) {
405 case PCI_DEVICE_ID_VIA_CX700: 406 case PCI_DEVICE_ID_VIA_CX700:
406 case PCI_DEVICE_ID_VIA_VX800: 407 case PCI_DEVICE_ID_VIA_VX800:
408 case PCI_DEVICE_ID_VIA_VX855:
407 case PCI_DEVICE_ID_VIA_8251: 409 case PCI_DEVICE_ID_VIA_8251:
408 case PCI_DEVICE_ID_VIA_8237: 410 case PCI_DEVICE_ID_VIA_8237:
409 case PCI_DEVICE_ID_VIA_8237A: 411 case PCI_DEVICE_ID_VIA_8237A:
@@ -469,6 +471,8 @@ static struct pci_device_id vt596_ids[] = {
469 .driver_data = SMBBA3 }, 471 .driver_data = SMBBA3 },
470 { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800), 472 { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
471 .driver_data = SMBBA3 }, 473 .driver_data = SMBBA3 },
474 { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855),
475 .driver_data = SMBBA3 },
472 { 0, } 476 { 0, }
473}; 477};
474 478
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1a474acc0ddd..7663d57833a0 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
163 163
164static struct i2c_adapter voodoo3_i2c_adapter = { 164static struct i2c_adapter voodoo3_i2c_adapter = {
165 .owner = THIS_MODULE, 165 .owner = THIS_MODULE,
166 .class = I2C_CLASS_TV_ANALOG,
167 .name = "I2C Voodoo3/Banshee adapter", 166 .name = "I2C Voodoo3/Banshee adapter",
168 .algo_data = &voo_i2c_bit_data, 167 .algo_data = &voo_i2c_bit_data,
169}; 168};
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 8f8c81eb0aee..02d746c9c474 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -64,21 +64,6 @@ config SENSORS_PCA9539
64 This driver is deprecated and will be dropped soon. Use 64 This driver is deprecated and will be dropped soon. Use
65 drivers/gpio/pca953x.c instead. 65 drivers/gpio/pca953x.c instead.
66 66
67config SENSORS_MAX6875
68 tristate "Maxim MAX6875 Power supply supervisor"
69 depends on EXPERIMENTAL
70 help
71 If you say yes here you get support for the Maxim MAX6875
72 EEPROM-programmable, quad power-supply sequencer/supervisor.
73
74 This provides an interface to program the EEPROM and reset the chip.
75
76 This driver also supports the Maxim MAX6874 hex power-supply
77 sequencer/supervisor if found at a compatible address.
78
79 This driver can also be built as a module. If so, the module
80 will be called max6875.
81
82config SENSORS_TSL2550 67config SENSORS_TSL2550
83 tristate "Taos TSL2550 ambient light sensor" 68 tristate "Taos TSL2550 ambient light sensor"
84 depends on EXPERIMENTAL 69 depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 55a376037183..f4680d16ee34 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
11# 11#
12 12
13obj-$(CONFIG_DS1682) += ds1682.o 13obj-$(CONFIG_DS1682) += ds1682.o
14obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
15obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o 14obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
16obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o 15obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
17obj-$(CONFIG_PCF8575) += pcf8575.o 16obj-$(CONFIG_PCF8575) += pcf8575.o
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 85e2e919d1cd..5ed622ee65c3 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -29,7 +29,6 @@
29#include <linux/i2c.h> 29#include <linux/i2c.h>
30#include <linux/init.h> 30#include <linux/init.h>
31#include <linux/idr.h> 31#include <linux/idr.h>
32#include <linux/platform_device.h>
33#include <linux/mutex.h> 32#include <linux/mutex.h>
34#include <linux/completion.h> 33#include <linux/completion.h>
35#include <linux/hardirq.h> 34#include <linux/hardirq.h>
@@ -451,16 +450,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
451 450
452 mutex_lock(&core_lock); 451 mutex_lock(&core_lock);
453 452
454 /* Add the adapter to the driver core.
455 * If the parent pointer is not set up,
456 * we add this adapter to the host bus.
457 */
458 if (adap->dev.parent == NULL) {
459 adap->dev.parent = &platform_bus;
460 pr_debug("I2C adapter driver [%s] forgot to specify "
461 "physical device\n", adap->name);
462 }
463
464 /* Set default timeout to 1 second if not already set */ 453 /* Set default timeout to 1 second if not already set */
465 if (adap->timeout == 0) 454 if (adap->timeout == 0)
466 adap->timeout = HZ; 455 adap->timeout = HZ;
@@ -1022,7 +1011,8 @@ module_exit(i2c_exit);
1022 */ 1011 */
1023int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) 1012int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
1024{ 1013{
1025 int ret; 1014 unsigned long orig_jiffies;
1015 int ret, try;
1026 1016
1027 /* REVISIT the fault reporting model here is weak: 1017 /* REVISIT the fault reporting model here is weak:
1028 * 1018 *
@@ -1060,7 +1050,15 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
1060 mutex_lock_nested(&adap->bus_lock, adap->level); 1050 mutex_lock_nested(&adap->bus_lock, adap->level);
1061 } 1051 }
1062 1052
1063 ret = adap->algo->master_xfer(adap,msgs,num); 1053 /* Retry automatically on arbitration loss */
1054 orig_jiffies = jiffies;
1055 for (ret = 0, try = 0; try <= adap->retries; try++) {
1056 ret = adap->algo->master_xfer(adap, msgs, num);
1057 if (ret != -EAGAIN)
1058 break;
1059 if (time_after(jiffies, orig_jiffies + adap->timeout))
1060 break;
1061 }
1064 mutex_unlock(&adap->bus_lock); 1062 mutex_unlock(&adap->bus_lock);
1065 1063
1066 return ret; 1064 return ret;
@@ -1509,7 +1507,7 @@ struct i2c_adapter* i2c_get_adapter(int id)
1509 struct i2c_adapter *adapter; 1507 struct i2c_adapter *adapter;
1510 1508
1511 mutex_lock(&core_lock); 1509 mutex_lock(&core_lock);
1512 adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id); 1510 adapter = idr_find(&i2c_adapter_idr, id);
1513 if (adapter && !try_module_get(adapter->owner)) 1511 if (adapter && !try_module_get(adapter->owner))
1514 adapter = NULL; 1512 adapter = NULL;
1515 1513
@@ -1995,14 +1993,27 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
1995 char read_write, u8 command, int protocol, 1993 char read_write, u8 command, int protocol,
1996 union i2c_smbus_data *data) 1994 union i2c_smbus_data *data)
1997{ 1995{
1996 unsigned long orig_jiffies;
1997 int try;
1998 s32 res; 1998 s32 res;
1999 1999
2000 flags &= I2C_M_TEN | I2C_CLIENT_PEC; 2000 flags &= I2C_M_TEN | I2C_CLIENT_PEC;
2001 2001
2002 if (adapter->algo->smbus_xfer) { 2002 if (adapter->algo->smbus_xfer) {
2003 mutex_lock(&adapter->bus_lock); 2003 mutex_lock(&adapter->bus_lock);
2004 res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write, 2004
2005 command, protocol, data); 2005 /* Retry automatically on arbitration loss */
2006 orig_jiffies = jiffies;
2007 for (res = 0, try = 0; try <= adapter->retries; try++) {
2008 res = adapter->algo->smbus_xfer(adapter, addr, flags,
2009 read_write, command,
2010 protocol, data);
2011 if (res != -EAGAIN)
2012 break;
2013 if (time_after(jiffies,
2014 orig_jiffies + adapter->timeout))
2015 break;
2016 }
2006 mutex_unlock(&adapter->bus_lock); 2017 mutex_unlock(&adapter->bus_lock);
2007 } else 2018 } else
2008 res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write, 2019 res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 0ddf9044948a..fde377c60cca 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -72,7 +72,7 @@ MODULE_PARM_DESC(verbose,"Verbose log operations "
72 "(default 0)"); 72 "(default 0)");
73 73
74struct thermostat { 74struct thermostat {
75 struct i2c_client clt; 75 struct i2c_client *clt;
76 u8 temps[3]; 76 u8 temps[3];
77 u8 cached_temp[3]; 77 u8 cached_temp[3];
78 u8 initial_limits[3]; 78 u8 initial_limits[3];
@@ -87,9 +87,6 @@ static struct of_device * of_dev;
87static struct thermostat* thermostat; 87static struct thermostat* thermostat;
88static struct task_struct *thread_therm = NULL; 88static struct task_struct *thread_therm = NULL;
89 89
90static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
91 int busno);
92
93static void write_both_fan_speed(struct thermostat *th, int speed); 90static void write_both_fan_speed(struct thermostat *th, int speed);
94static void write_fan_speed(struct thermostat *th, int speed, int fan); 91static void write_fan_speed(struct thermostat *th, int speed, int fan);
95 92
@@ -101,7 +98,7 @@ write_reg(struct thermostat* th, int reg, u8 data)
101 98
102 tmp[0] = reg; 99 tmp[0] = reg;
103 tmp[1] = data; 100 tmp[1] = data;
104 rc = i2c_master_send(&th->clt, (const char *)tmp, 2); 101 rc = i2c_master_send(th->clt, (const char *)tmp, 2);
105 if (rc < 0) 102 if (rc < 0)
106 return rc; 103 return rc;
107 if (rc != 2) 104 if (rc != 2)
@@ -116,12 +113,12 @@ read_reg(struct thermostat* th, int reg)
116 int rc; 113 int rc;
117 114
118 reg_addr = (u8)reg; 115 reg_addr = (u8)reg;
119 rc = i2c_master_send(&th->clt, &reg_addr, 1); 116 rc = i2c_master_send(th->clt, &reg_addr, 1);
120 if (rc < 0) 117 if (rc < 0)
121 return rc; 118 return rc;
122 if (rc != 1) 119 if (rc != 1)
123 return -ENODEV; 120 return -ENODEV;
124 rc = i2c_master_recv(&th->clt, (char *)&data, 1); 121 rc = i2c_master_recv(th->clt, (char *)&data, 1);
125 if (rc < 0) 122 if (rc < 0)
126 return rc; 123 return rc;
127 return data; 124 return data;
@@ -131,26 +128,36 @@ static int
131attach_thermostat(struct i2c_adapter *adapter) 128attach_thermostat(struct i2c_adapter *adapter)
132{ 129{
133 unsigned long bus_no; 130 unsigned long bus_no;
131 struct i2c_board_info info;
132 struct i2c_client *client;
134 133
135 if (strncmp(adapter->name, "uni-n", 5)) 134 if (strncmp(adapter->name, "uni-n", 5))
136 return -ENODEV; 135 return -ENODEV;
137 bus_no = simple_strtoul(adapter->name + 6, NULL, 10); 136 bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
138 if (bus_no != therm_bus) 137 if (bus_no != therm_bus)
139 return -ENODEV; 138 return -ENODEV;
140 return attach_one_thermostat(adapter, therm_address, bus_no); 139
140 memset(&info, 0, sizeof(struct i2c_board_info));
141 strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE);
142 info.addr = therm_address;
143 client = i2c_new_device(adapter, &info);
144 if (!client)
145 return -ENODEV;
146
147 /*
148 * Let i2c-core delete that device on driver removal.
149 * This is safe because i2c-core holds the core_lock mutex for us.
150 */
151 list_add_tail(&client->detected, &client->driver->clients);
152 return 0;
141} 153}
142 154
143static int 155static int
144detach_thermostat(struct i2c_adapter *adapter) 156remove_thermostat(struct i2c_client *client)
145{ 157{
146 struct thermostat* th; 158 struct thermostat *th = i2c_get_clientdata(client);
147 int i; 159 int i;
148 160
149 if (thermostat == NULL)
150 return 0;
151
152 th = thermostat;
153
154 if (thread_therm != NULL) { 161 if (thread_therm != NULL) {
155 kthread_stop(thread_therm); 162 kthread_stop(thread_therm);
156 } 163 }
@@ -166,8 +173,6 @@ detach_thermostat(struct i2c_adapter *adapter)
166 173
167 write_both_fan_speed(th, -1); 174 write_both_fan_speed(th, -1);
168 175
169 i2c_detach_client(&th->clt);
170
171 thermostat = NULL; 176 thermostat = NULL;
172 177
173 kfree(th); 178 kfree(th);
@@ -175,14 +180,6 @@ detach_thermostat(struct i2c_adapter *adapter)
175 return 0; 180 return 0;
176} 181}
177 182
178static struct i2c_driver thermostat_driver = {
179 .driver = {
180 .name = "therm_adt746x",
181 },
182 .attach_adapter = attach_thermostat,
183 .detach_adapter = detach_thermostat,
184};
185
186static int read_fan_speed(struct thermostat *th, u8 addr) 183static int read_fan_speed(struct thermostat *th, u8 addr)
187{ 184{
188 u8 tmp[2]; 185 u8 tmp[2];
@@ -371,8 +368,8 @@ static void set_limit(struct thermostat *th, int i)
371 th->limits[i] = default_limits_local[i] + limit_adjust; 368 th->limits[i] = default_limits_local[i] + limit_adjust;
372} 369}
373 370
374static int attach_one_thermostat(struct i2c_adapter *adapter, int addr, 371static int probe_thermostat(struct i2c_client *client,
375 int busno) 372 const struct i2c_device_id *id)
376{ 373{
377 struct thermostat* th; 374 struct thermostat* th;
378 int rc; 375 int rc;
@@ -385,16 +382,12 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
385 if (!th) 382 if (!th)
386 return -ENOMEM; 383 return -ENOMEM;
387 384
388 th->clt.addr = addr; 385 i2c_set_clientdata(client, th);
389 th->clt.adapter = adapter; 386 th->clt = client;
390 th->clt.driver = &thermostat_driver;
391 strcpy(th->clt.name, "thermostat");
392 387
393 rc = read_reg(th, 0); 388 rc = read_reg(th, 0);
394 if (rc < 0) { 389 if (rc < 0) {
395 printk(KERN_ERR "adt746x: Thermostat failed to read config " 390 dev_err(&client->dev, "Thermostat failed to read config!\n");
396 "from bus %d !\n",
397 busno);
398 kfree(th); 391 kfree(th);
399 return -ENODEV; 392 return -ENODEV;
400 } 393 }
@@ -423,14 +416,6 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
423 416
424 thermostat = th; 417 thermostat = th;
425 418
426 if (i2c_attach_client(&th->clt)) {
427 printk(KERN_INFO "adt746x: Thermostat failed to attach "
428 "client !\n");
429 thermostat = NULL;
430 kfree(th);
431 return -ENODEV;
432 }
433
434 /* be sure to really write fan speed the first time */ 419 /* be sure to really write fan speed the first time */
435 th->last_speed[0] = -2; 420 th->last_speed[0] = -2;
436 th->last_speed[1] = -2; 421 th->last_speed[1] = -2;
@@ -456,6 +441,21 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
456 return 0; 441 return 0;
457} 442}
458 443
444static const struct i2c_device_id therm_adt746x_id[] = {
445 { "therm_adt746x", 0 },
446 { }
447};
448
449static struct i2c_driver thermostat_driver = {
450 .driver = {
451 .name = "therm_adt746x",
452 },
453 .attach_adapter = attach_thermostat,
454 .probe = probe_thermostat,
455 .remove = remove_thermostat,
456 .id_table = therm_adt746x_id,
457};
458
459/* 459/*
460 * Now, unfortunately, sysfs doesn't give us a nice void * we could 460 * Now, unfortunately, sysfs doesn't give us a nice void * we could
461 * pass around to the attribute functions, so we don't really have 461 * pass around to the attribute functions, so we don't really have
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 817607e2af6a..a028598af2d3 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -287,22 +287,6 @@ struct fcu_fan_table fcu_fans[] = {
287}; 287};
288 288
289/* 289/*
290 * i2c_driver structure to attach to the host i2c controller
291 */
292
293static int therm_pm72_attach(struct i2c_adapter *adapter);
294static int therm_pm72_detach(struct i2c_adapter *adapter);
295
296static struct i2c_driver therm_pm72_driver =
297{
298 .driver = {
299 .name = "therm_pm72",
300 },
301 .attach_adapter = therm_pm72_attach,
302 .detach_adapter = therm_pm72_detach,
303};
304
305/*
306 * Utility function to create an i2c_client structure and 290 * Utility function to create an i2c_client structure and
307 * attach it to one of u3 adapters 291 * attach it to one of u3 adapters
308 */ 292 */
@@ -310,6 +294,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
310{ 294{
311 struct i2c_client *clt; 295 struct i2c_client *clt;
312 struct i2c_adapter *adap; 296 struct i2c_adapter *adap;
297 struct i2c_board_info info;
313 298
314 if (id & 0x200) 299 if (id & 0x200)
315 adap = k2; 300 adap = k2;
@@ -320,31 +305,21 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
320 if (adap == NULL) 305 if (adap == NULL)
321 return NULL; 306 return NULL;
322 307
323 clt = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); 308 memset(&info, 0, sizeof(struct i2c_board_info));
324 if (clt == NULL) 309 info.addr = (id >> 1) & 0x7f;
325 return NULL; 310 strlcpy(info.type, "therm_pm72", I2C_NAME_SIZE);
326 311 clt = i2c_new_device(adap, &info);
327 clt->addr = (id >> 1) & 0x7f; 312 if (!clt) {
328 clt->adapter = adap;
329 clt->driver = &therm_pm72_driver;
330 strncpy(clt->name, name, I2C_NAME_SIZE-1);
331
332 if (i2c_attach_client(clt)) {
333 printk(KERN_ERR "therm_pm72: Failed to attach to i2c ID 0x%x\n", id); 313 printk(KERN_ERR "therm_pm72: Failed to attach to i2c ID 0x%x\n", id);
334 kfree(clt);
335 return NULL; 314 return NULL;
336 } 315 }
337 return clt;
338}
339 316
340/* 317 /*
341 * Utility function to get rid of the i2c_client structure 318 * Let i2c-core delete that device on driver removal.
342 * (will also detach from the adapter hopepfully) 319 * This is safe because i2c-core holds the core_lock mutex for us.
343 */ 320 */
344static void detach_i2c_chip(struct i2c_client *clt) 321 list_add_tail(&clt->detected, &clt->driver->clients);
345{ 322 return clt;
346 i2c_detach_client(clt);
347 kfree(clt);
348} 323}
349 324
350/* 325/*
@@ -1203,8 +1178,6 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
1203 1178
1204 return 0; 1179 return 0;
1205 fail: 1180 fail:
1206 if (state->monitor)
1207 detach_i2c_chip(state->monitor);
1208 state->monitor = NULL; 1181 state->monitor = NULL;
1209 1182
1210 return -ENODEV; 1183 return -ENODEV;
@@ -1232,7 +1205,6 @@ static void dispose_cpu_state(struct cpu_pid_state *state)
1232 device_remove_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm); 1205 device_remove_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
1233 } 1206 }
1234 1207
1235 detach_i2c_chip(state->monitor);
1236 state->monitor = NULL; 1208 state->monitor = NULL;
1237} 1209}
1238 1210
@@ -1407,7 +1379,6 @@ static void dispose_backside_state(struct backside_pid_state *state)
1407 device_remove_file(&of_dev->dev, &dev_attr_backside_temperature); 1379 device_remove_file(&of_dev->dev, &dev_attr_backside_temperature);
1408 device_remove_file(&of_dev->dev, &dev_attr_backside_fan_pwm); 1380 device_remove_file(&of_dev->dev, &dev_attr_backside_fan_pwm);
1409 1381
1410 detach_i2c_chip(state->monitor);
1411 state->monitor = NULL; 1382 state->monitor = NULL;
1412} 1383}
1413 1384
@@ -1532,7 +1503,6 @@ static void dispose_drives_state(struct drives_pid_state *state)
1532 device_remove_file(&of_dev->dev, &dev_attr_drives_temperature); 1503 device_remove_file(&of_dev->dev, &dev_attr_drives_temperature);
1533 device_remove_file(&of_dev->dev, &dev_attr_drives_fan_rpm); 1504 device_remove_file(&of_dev->dev, &dev_attr_drives_fan_rpm);
1534 1505
1535 detach_i2c_chip(state->monitor);
1536 state->monitor = NULL; 1506 state->monitor = NULL;
1537} 1507}
1538 1508
@@ -1654,7 +1624,6 @@ static void dispose_dimms_state(struct dimm_pid_state *state)
1654 1624
1655 device_remove_file(&of_dev->dev, &dev_attr_dimms_temperature); 1625 device_remove_file(&of_dev->dev, &dev_attr_dimms_temperature);
1656 1626
1657 detach_i2c_chip(state->monitor);
1658 state->monitor = NULL; 1627 state->monitor = NULL;
1659} 1628}
1660 1629
@@ -1779,7 +1748,6 @@ static void dispose_slots_state(struct slots_pid_state *state)
1779 device_remove_file(&of_dev->dev, &dev_attr_slots_temperature); 1748 device_remove_file(&of_dev->dev, &dev_attr_slots_temperature);
1780 device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm); 1749 device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
1781 1750
1782 detach_i2c_chip(state->monitor);
1783 state->monitor = NULL; 1751 state->monitor = NULL;
1784} 1752}
1785 1753
@@ -2008,8 +1976,6 @@ static int attach_fcu(void)
2008 */ 1976 */
2009static void detach_fcu(void) 1977static void detach_fcu(void)
2010{ 1978{
2011 if (fcu)
2012 detach_i2c_chip(fcu);
2013 fcu = NULL; 1979 fcu = NULL;
2014} 1980}
2015 1981
@@ -2060,12 +2026,21 @@ static int therm_pm72_attach(struct i2c_adapter *adapter)
2060 return 0; 2026 return 0;
2061} 2027}
2062 2028
2029static int therm_pm72_probe(struct i2c_client *client,
2030 const struct i2c_device_id *id)
2031{
2032 /* Always succeed, the real work was done in therm_pm72_attach() */
2033 return 0;
2034}
2035
2063/* 2036/*
2064 * Called on every adapter when the driver or the i2c controller 2037 * Called when any of the devices which participates into thermal management
2065 * is going away. 2038 * is going away.
2066 */ 2039 */
2067static int therm_pm72_detach(struct i2c_adapter *adapter) 2040static int therm_pm72_remove(struct i2c_client *client)
2068{ 2041{
2042 struct i2c_adapter *adapter = client->adapter;
2043
2069 mutex_lock(&driver_lock); 2044 mutex_lock(&driver_lock);
2070 2045
2071 if (state != state_detached) 2046 if (state != state_detached)
@@ -2096,6 +2071,30 @@ static int therm_pm72_detach(struct i2c_adapter *adapter)
2096 return 0; 2071 return 0;
2097} 2072}
2098 2073
2074/*
2075 * i2c_driver structure to attach to the host i2c controller
2076 */
2077
2078static const struct i2c_device_id therm_pm72_id[] = {
2079 /*
2080 * Fake device name, thermal management is done by several
2081 * chips but we don't need to differentiate between them at
2082 * this point.
2083 */
2084 { "therm_pm72", 0 },
2085 { }
2086};
2087
2088static struct i2c_driver therm_pm72_driver = {
2089 .driver = {
2090 .name = "therm_pm72",
2091 },
2092 .attach_adapter = therm_pm72_attach,
2093 .probe = therm_pm72_probe,
2094 .remove = therm_pm72_remove,
2095 .id_table = therm_pm72_id,
2096};
2097
2099static int fan_check_loc_match(const char *loc, int fan) 2098static int fan_check_loc_match(const char *loc, int fan)
2100{ 2099{
2101 char tmp[64]; 2100 char tmp[64];
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 3da0a02efd76..40023313a760 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -48,16 +48,6 @@
48 48
49#define LOG_TEMP 0 /* continously log temperature */ 49#define LOG_TEMP 0 /* continously log temperature */
50 50
51static int do_probe( struct i2c_adapter *adapter, int addr, int kind);
52
53/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
54static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
55 0x4c, 0x4d, 0x4e, 0x4f,
56 0x2c, 0x2d, 0x2e, 0x2f,
57 I2C_CLIENT_END };
58
59I2C_CLIENT_INSMOD;
60
61static struct { 51static struct {
62 volatile int running; 52 volatile int running;
63 struct task_struct *poll_task; 53 struct task_struct *poll_task;
@@ -315,53 +305,54 @@ static int control_loop(void *dummy)
315static int 305static int
316do_attach( struct i2c_adapter *adapter ) 306do_attach( struct i2c_adapter *adapter )
317{ 307{
318 int ret = 0; 308 /* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
309 static const unsigned short scan_ds1775[] = {
310 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
311 I2C_CLIENT_END
312 };
313 static const unsigned short scan_adm1030[] = {
314 0x2c, 0x2d, 0x2e, 0x2f,
315 I2C_CLIENT_END
316 };
319 317
320 if( strncmp(adapter->name, "uni-n", 5) ) 318 if( strncmp(adapter->name, "uni-n", 5) )
321 return 0; 319 return 0;
322 320
323 if( !x.running ) { 321 if( !x.running ) {
324 ret = i2c_probe( adapter, &addr_data, &do_probe ); 322 struct i2c_board_info info;
323
324 memset(&info, 0, sizeof(struct i2c_board_info));
325 strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
326 i2c_new_probed_device(adapter, &info, scan_ds1775);
327
328 strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
329 i2c_new_probed_device(adapter, &info, scan_adm1030);
330
325 if( x.thermostat && x.fan ) { 331 if( x.thermostat && x.fan ) {
326 x.running = 1; 332 x.running = 1;
327 x.poll_task = kthread_run(control_loop, NULL, "g4fand"); 333 x.poll_task = kthread_run(control_loop, NULL, "g4fand");
328 } 334 }
329 } 335 }
330 return ret; 336 return 0;
331} 337}
332 338
333static int 339static int
334do_detach( struct i2c_client *client ) 340do_remove(struct i2c_client *client)
335{ 341{
336 int err; 342 if (x.running) {
337 343 x.running = 0;
338 if( (err=i2c_detach_client(client)) ) 344 kthread_stop(x.poll_task);
339 printk(KERN_ERR "failed to detach thermostat client\n"); 345 x.poll_task = NULL;
340 else {
341 if( x.running ) {
342 x.running = 0;
343 kthread_stop(x.poll_task);
344 x.poll_task = NULL;
345 }
346 if( client == x.thermostat )
347 x.thermostat = NULL;
348 else if( client == x.fan )
349 x.fan = NULL;
350 else {
351 printk(KERN_ERR "g4fan: bad client\n");
352 }
353 kfree( client );
354 } 346 }
355 return err; 347 if (client == x.thermostat)
356} 348 x.thermostat = NULL;
349 else if (client == x.fan)
350 x.fan = NULL;
351 else
352 printk(KERN_ERR "g4fan: bad client\n");
357 353
358static struct i2c_driver g4fan_driver = { 354 return 0;
359 .driver = { 355}
360 .name = "therm_windtunnel",
361 },
362 .attach_adapter = do_attach,
363 .detach_client = do_detach,
364};
365 356
366static int 357static int
367attach_fan( struct i2c_client *cl ) 358attach_fan( struct i2c_client *cl )
@@ -374,13 +365,8 @@ attach_fan( struct i2c_client *cl )
374 goto out; 365 goto out;
375 printk("ADM1030 fan controller [@%02x]\n", cl->addr ); 366 printk("ADM1030 fan controller [@%02x]\n", cl->addr );
376 367
377 strlcpy( cl->name, "ADM1030 fan controller", sizeof(cl->name) ); 368 x.fan = cl;
378
379 if( !i2c_attach_client(cl) )
380 x.fan = cl;
381 out: 369 out:
382 if( cl != x.fan )
383 kfree( cl );
384 return 0; 370 return 0;
385} 371}
386 372
@@ -412,39 +398,47 @@ attach_thermostat( struct i2c_client *cl )
412 x.temp = temp; 398 x.temp = temp;
413 x.overheat_temp = os_temp; 399 x.overheat_temp = os_temp;
414 x.overheat_hyst = hyst_temp; 400 x.overheat_hyst = hyst_temp;
415 401 x.thermostat = cl;
416 strlcpy( cl->name, "DS1775 thermostat", sizeof(cl->name) );
417
418 if( !i2c_attach_client(cl) )
419 x.thermostat = cl;
420out: 402out:
421 if( cl != x.thermostat )
422 kfree( cl );
423 return 0; 403 return 0;
424} 404}
425 405
406enum chip { ds1775, adm1030 };
407
408static const struct i2c_device_id therm_windtunnel_id[] = {
409 { "therm_ds1775", ds1775 },
410 { "therm_adm1030", adm1030 },
411 { }
412};
413
426static int 414static int
427do_probe( struct i2c_adapter *adapter, int addr, int kind ) 415do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
428{ 416{
429 struct i2c_client *cl; 417 struct i2c_adapter *adapter = cl->adapter;
430 418
431 if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA 419 if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA
432 | I2C_FUNC_SMBUS_WRITE_BYTE) ) 420 | I2C_FUNC_SMBUS_WRITE_BYTE) )
433 return 0; 421 return 0;
434 422
435 if( !(cl=kzalloc(sizeof(*cl), GFP_KERNEL)) ) 423 switch (id->driver_data) {
436 return -ENOMEM; 424 case adm1030:
437
438 cl->addr = addr;
439 cl->adapter = adapter;
440 cl->driver = &g4fan_driver;
441 cl->flags = 0;
442
443 if( addr < 0x48 )
444 return attach_fan( cl ); 425 return attach_fan( cl );
445 return attach_thermostat( cl ); 426 case ds1775:
427 return attach_thermostat(cl);
428 }
429 return 0;
446} 430}
447 431
432static struct i2c_driver g4fan_driver = {
433 .driver = {
434 .name = "therm_windtunnel",
435 },
436 .attach_adapter = do_attach,
437 .probe = do_probe,
438 .remove = do_remove,
439 .id_table = therm_windtunnel_id,
440};
441
448 442
449/************************************************************************/ 443/************************************************************************/
450/* initialization / cleanup */ 444/* initialization / cleanup */
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index b92b959fe16e..529886c7a826 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -37,34 +37,22 @@
37struct wf_lm75_sensor { 37struct wf_lm75_sensor {
38 int ds1775 : 1; 38 int ds1775 : 1;
39 int inited : 1; 39 int inited : 1;
40 struct i2c_client i2c; 40 struct i2c_client *i2c;
41 struct wf_sensor sens; 41 struct wf_sensor sens;
42}; 42};
43#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens) 43#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
44#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c)
45
46static int wf_lm75_attach(struct i2c_adapter *adapter);
47static int wf_lm75_detach(struct i2c_client *client);
48
49static struct i2c_driver wf_lm75_driver = {
50 .driver = {
51 .name = "wf_lm75",
52 },
53 .attach_adapter = wf_lm75_attach,
54 .detach_client = wf_lm75_detach,
55};
56 44
57static int wf_lm75_get(struct wf_sensor *sr, s32 *value) 45static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
58{ 46{
59 struct wf_lm75_sensor *lm = wf_to_lm75(sr); 47 struct wf_lm75_sensor *lm = wf_to_lm75(sr);
60 s32 data; 48 s32 data;
61 49
62 if (lm->i2c.adapter == NULL) 50 if (lm->i2c == NULL)
63 return -ENODEV; 51 return -ENODEV;
64 52
65 /* Init chip if necessary */ 53 /* Init chip if necessary */
66 if (!lm->inited) { 54 if (!lm->inited) {
67 u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1); 55 u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
68 56
69 DBG("wf_lm75: Initializing %s, cfg was: %02x\n", 57 DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
70 sr->name, cfg); 58 sr->name, cfg);
@@ -73,7 +61,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
73 * the firmware for now 61 * the firmware for now
74 */ 62 */
75 cfg_new = cfg & ~0x01; 63 cfg_new = cfg & ~0x01;
76 i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new); 64 i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
77 lm->inited = 1; 65 lm->inited = 1;
78 66
79 /* If we just powered it up, let's wait 200 ms */ 67 /* If we just powered it up, let's wait 200 ms */
@@ -81,7 +69,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
81 } 69 }
82 70
83 /* Read temperature register */ 71 /* Read temperature register */
84 data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0)); 72 data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
85 data <<= 8; 73 data <<= 8;
86 *value = data; 74 *value = data;
87 75
@@ -92,12 +80,6 @@ static void wf_lm75_release(struct wf_sensor *sr)
92{ 80{
93 struct wf_lm75_sensor *lm = wf_to_lm75(sr); 81 struct wf_lm75_sensor *lm = wf_to_lm75(sr);
94 82
95 /* check if client is registered and detach from i2c */
96 if (lm->i2c.adapter) {
97 i2c_detach_client(&lm->i2c);
98 lm->i2c.adapter = NULL;
99 }
100
101 kfree(lm); 83 kfree(lm);
102} 84}
103 85
@@ -107,59 +89,77 @@ static struct wf_sensor_ops wf_lm75_ops = {
107 .owner = THIS_MODULE, 89 .owner = THIS_MODULE,
108}; 90};
109 91
110static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter, 92static int wf_lm75_probe(struct i2c_client *client,
111 u8 addr, int ds1775, 93 const struct i2c_device_id *id)
112 const char *loc)
113{ 94{
114 struct wf_lm75_sensor *lm; 95 struct wf_lm75_sensor *lm;
115 int rc; 96 int rc;
116 97
117 DBG("wf_lm75: creating %s device at address 0x%02x\n",
118 ds1775 ? "ds1775" : "lm75", addr);
119
120 lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL); 98 lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
121 if (lm == NULL) 99 if (lm == NULL)
122 return NULL; 100 return -ENODEV;
101
102 lm->inited = 0;
103 lm->ds1775 = id->driver_data;
104 lm->i2c = client;
105 lm->sens.name = client->dev.platform_data;
106 lm->sens.ops = &wf_lm75_ops;
107 i2c_set_clientdata(client, lm);
108
109 rc = wf_register_sensor(&lm->sens);
110 if (rc) {
111 i2c_set_clientdata(client, NULL);
112 kfree(lm);
113 }
114
115 return rc;
116}
117
118static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
119 u8 addr, int ds1775,
120 const char *loc)
121{
122 struct i2c_board_info info;
123 struct i2c_client *client;
124 char *name;
125
126 DBG("wf_lm75: creating %s device at address 0x%02x\n",
127 ds1775 ? "ds1775" : "lm75", addr);
123 128
124 /* Usual rant about sensor names not beeing very consistent in 129 /* Usual rant about sensor names not beeing very consistent in
125 * the device-tree, oh well ... 130 * the device-tree, oh well ...
126 * Add more entries below as you deal with more setups 131 * Add more entries below as you deal with more setups
127 */ 132 */
128 if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY")) 133 if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
129 lm->sens.name = "hd-temp"; 134 name = "hd-temp";
130 else if (!strcmp(loc, "Incoming Air Temp")) 135 else if (!strcmp(loc, "Incoming Air Temp"))
131 lm->sens.name = "incoming-air-temp"; 136 name = "incoming-air-temp";
132 else if (!strcmp(loc, "ODD Temp")) 137 else if (!strcmp(loc, "ODD Temp"))
133 lm->sens.name = "optical-drive-temp"; 138 name = "optical-drive-temp";
134 else if (!strcmp(loc, "HD Temp")) 139 else if (!strcmp(loc, "HD Temp"))
135 lm->sens.name = "hard-drive-temp"; 140 name = "hard-drive-temp";
136 else 141 else
137 goto fail; 142 goto fail;
138 143
139 lm->inited = 0; 144 memset(&info, 0, sizeof(struct i2c_board_info));
140 lm->sens.ops = &wf_lm75_ops; 145 info.addr = (addr >> 1) & 0x7f;
141 lm->ds1775 = ds1775; 146 info.platform_data = name;
142 lm->i2c.addr = (addr >> 1) & 0x7f; 147 strlcpy(info.type, ds1775 ? "wf_ds1775" : "wf_lm75", I2C_NAME_SIZE);
143 lm->i2c.adapter = adapter;
144 lm->i2c.driver = &wf_lm75_driver;
145 strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
146
147 rc = i2c_attach_client(&lm->i2c);
148 if (rc) {
149 printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
150 " err %d\n", ds1775 ? "ds1775" : "lm75",
151 lm->i2c.name, rc);
152 goto fail;
153 }
154 148
155 if (wf_register_sensor(&lm->sens)) { 149 client = i2c_new_device(adapter, &info);
156 i2c_detach_client(&lm->i2c); 150 if (client == NULL) {
151 printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
152 ds1775 ? "ds1775" : "lm75", name);
157 goto fail; 153 goto fail;
158 } 154 }
159 155
160 return lm; 156 /*
157 * Let i2c-core delete that device on driver removal.
158 * This is safe because i2c-core holds the core_lock mutex for us.
159 */
160 list_add_tail(&client->detected, &client->driver->clients);
161 return client;
161 fail: 162 fail:
162 kfree(lm);
163 return NULL; 163 return NULL;
164} 164}
165 165
@@ -202,21 +202,38 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
202 return 0; 202 return 0;
203} 203}
204 204
205static int wf_lm75_detach(struct i2c_client *client) 205static int wf_lm75_remove(struct i2c_client *client)
206{ 206{
207 struct wf_lm75_sensor *lm = i2c_to_lm75(client); 207 struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
208 208
209 DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name); 209 DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
210 210
211 /* Mark client detached */ 211 /* Mark client detached */
212 lm->i2c.adapter = NULL; 212 lm->i2c = NULL;
213 213
214 /* release sensor */ 214 /* release sensor */
215 wf_unregister_sensor(&lm->sens); 215 wf_unregister_sensor(&lm->sens);
216 216
217 i2c_set_clientdata(client, NULL);
217 return 0; 218 return 0;
218} 219}
219 220
221static const struct i2c_device_id wf_lm75_id[] = {
222 { "wf_lm75", 0 },
223 { "wf_ds1775", 1 },
224 { }
225};
226
227static struct i2c_driver wf_lm75_driver = {
228 .driver = {
229 .name = "wf_lm75",
230 },
231 .attach_adapter = wf_lm75_attach,
232 .probe = wf_lm75_probe,
233 .remove = wf_lm75_remove,
234 .id_table = wf_lm75_id,
235};
236
220static int __init wf_lm75_sensor_init(void) 237static int __init wf_lm75_sensor_init(void)
221{ 238{
222 /* Don't register on old machines that use therm_pm72 for now */ 239 /* Don't register on old machines that use therm_pm72 for now */
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index e207a90d6b27..e2a55ecda2b2 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -26,34 +26,22 @@
26#define MAX6690_EXTERNAL_TEMP 1 26#define MAX6690_EXTERNAL_TEMP 1
27 27
28struct wf_6690_sensor { 28struct wf_6690_sensor {
29 struct i2c_client i2c; 29 struct i2c_client *i2c;
30 struct wf_sensor sens; 30 struct wf_sensor sens;
31}; 31};
32 32
33#define wf_to_6690(x) container_of((x), struct wf_6690_sensor, sens) 33#define wf_to_6690(x) container_of((x), struct wf_6690_sensor, sens)
34#define i2c_to_6690(x) container_of((x), struct wf_6690_sensor, i2c)
35
36static int wf_max6690_attach(struct i2c_adapter *adapter);
37static int wf_max6690_detach(struct i2c_client *client);
38
39static struct i2c_driver wf_max6690_driver = {
40 .driver = {
41 .name = "wf_max6690",
42 },
43 .attach_adapter = wf_max6690_attach,
44 .detach_client = wf_max6690_detach,
45};
46 34
47static int wf_max6690_get(struct wf_sensor *sr, s32 *value) 35static int wf_max6690_get(struct wf_sensor *sr, s32 *value)
48{ 36{
49 struct wf_6690_sensor *max = wf_to_6690(sr); 37 struct wf_6690_sensor *max = wf_to_6690(sr);
50 s32 data; 38 s32 data;
51 39
52 if (max->i2c.adapter == NULL) 40 if (max->i2c == NULL)
53 return -ENODEV; 41 return -ENODEV;
54 42
55 /* chip gets initialized by firmware */ 43 /* chip gets initialized by firmware */
56 data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP); 44 data = i2c_smbus_read_byte_data(max->i2c, MAX6690_EXTERNAL_TEMP);
57 if (data < 0) 45 if (data < 0)
58 return data; 46 return data;
59 *value = data << 16; 47 *value = data << 16;
@@ -64,10 +52,6 @@ static void wf_max6690_release(struct wf_sensor *sr)
64{ 52{
65 struct wf_6690_sensor *max = wf_to_6690(sr); 53 struct wf_6690_sensor *max = wf_to_6690(sr);
66 54
67 if (max->i2c.adapter) {
68 i2c_detach_client(&max->i2c);
69 max->i2c.adapter = NULL;
70 }
71 kfree(max); 55 kfree(max);
72} 56}
73 57
@@ -77,19 +61,40 @@ static struct wf_sensor_ops wf_max6690_ops = {
77 .owner = THIS_MODULE, 61 .owner = THIS_MODULE,
78}; 62};
79 63
80static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr, 64static int wf_max6690_probe(struct i2c_client *client,
81 const char *loc) 65 const struct i2c_device_id *id)
82{ 66{
83 struct wf_6690_sensor *max; 67 struct wf_6690_sensor *max;
84 char *name; 68 int rc;
85 69
86 max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL); 70 max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
87 if (max == NULL) { 71 if (max == NULL) {
88 printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: " 72 printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: "
89 "no memory\n", loc); 73 "no memory\n");
90 return; 74 return -ENOMEM;
75 }
76
77 max->i2c = client;
78 max->sens.name = client->dev.platform_data;
79 max->sens.ops = &wf_max6690_ops;
80 i2c_set_clientdata(client, max);
81
82 rc = wf_register_sensor(&max->sens);
83 if (rc) {
84 i2c_set_clientdata(client, NULL);
85 kfree(max);
91 } 86 }
92 87
88 return rc;
89}
90
91static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
92 u8 addr, const char *loc)
93{
94 struct i2c_board_info info;
95 struct i2c_client *client;
96 char *name;
97
93 if (!strcmp(loc, "BACKSIDE")) 98 if (!strcmp(loc, "BACKSIDE"))
94 name = "backside-temp"; 99 name = "backside-temp";
95 else if (!strcmp(loc, "NB Ambient")) 100 else if (!strcmp(loc, "NB Ambient"))
@@ -99,27 +104,26 @@ static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
99 else 104 else
100 goto fail; 105 goto fail;
101 106
102 max->sens.ops = &wf_max6690_ops; 107 memset(&info, 0, sizeof(struct i2c_board_info));
103 max->sens.name = name; 108 info.addr = addr >> 1;
104 max->i2c.addr = addr >> 1; 109 info.platform_data = name;
105 max->i2c.adapter = adapter; 110 strlcpy(info.type, "wf_max6690", I2C_NAME_SIZE);
106 max->i2c.driver = &wf_max6690_driver;
107 strncpy(max->i2c.name, name, I2C_NAME_SIZE-1);
108 111
109 if (i2c_attach_client(&max->i2c)) { 112 client = i2c_new_device(adapter, &info);
113 if (client == NULL) {
110 printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n"); 114 printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
111 goto fail; 115 goto fail;
112 } 116 }
113 117
114 if (wf_register_sensor(&max->sens)) { 118 /*
115 i2c_detach_client(&max->i2c); 119 * Let i2c-core delete that device on driver removal.
116 goto fail; 120 * This is safe because i2c-core holds the core_lock mutex for us.
117 } 121 */
118 122 list_add_tail(&client->detected, &client->driver->clients);
119 return; 123 return client;
120 124
121 fail: 125 fail:
122 kfree(max); 126 return NULL;
123} 127}
124 128
125static int wf_max6690_attach(struct i2c_adapter *adapter) 129static int wf_max6690_attach(struct i2c_adapter *adapter)
@@ -154,16 +158,31 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
154 return 0; 158 return 0;
155} 159}
156 160
157static int wf_max6690_detach(struct i2c_client *client) 161static int wf_max6690_remove(struct i2c_client *client)
158{ 162{
159 struct wf_6690_sensor *max = i2c_to_6690(client); 163 struct wf_6690_sensor *max = i2c_get_clientdata(client);
160 164
161 max->i2c.adapter = NULL; 165 max->i2c = NULL;
162 wf_unregister_sensor(&max->sens); 166 wf_unregister_sensor(&max->sens);
163 167
164 return 0; 168 return 0;
165} 169}
166 170
171static const struct i2c_device_id wf_max6690_id[] = {
172 { "wf_max6690", 0 },
173 { }
174};
175
176static struct i2c_driver wf_max6690_driver = {
177 .driver = {
178 .name = "wf_max6690",
179 },
180 .attach_adapter = wf_max6690_attach,
181 .probe = wf_max6690_probe,
182 .remove = wf_max6690_remove,
183 .id_table = wf_max6690_id,
184};
185
167static int __init wf_max6690_sensor_init(void) 186static int __init wf_max6690_sensor_init(void)
168{ 187{
169 /* Don't register on old machines that use therm_pm72 for now */ 188 /* Don't register on old machines that use therm_pm72 for now */
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 7847e981ac33..5da729e58f99 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -39,7 +39,7 @@ struct wf_sat {
39 struct mutex mutex; 39 struct mutex mutex;
40 unsigned long last_read; /* jiffies when cache last updated */ 40 unsigned long last_read; /* jiffies when cache last updated */
41 u8 cache[16]; 41 u8 cache[16];
42 struct i2c_client i2c; 42 struct i2c_client *i2c;
43 struct device_node *node; 43 struct device_node *node;
44}; 44};
45 45
@@ -54,18 +54,6 @@ struct wf_sat_sensor {
54}; 54};
55 55
56#define wf_to_sat(c) container_of(c, struct wf_sat_sensor, sens) 56#define wf_to_sat(c) container_of(c, struct wf_sat_sensor, sens)
57#define i2c_to_sat(c) container_of(c, struct wf_sat, i2c)
58
59static int wf_sat_attach(struct i2c_adapter *adapter);
60static int wf_sat_detach(struct i2c_client *client);
61
62static struct i2c_driver wf_sat_driver = {
63 .driver = {
64 .name = "wf_smu_sat",
65 },
66 .attach_adapter = wf_sat_attach,
67 .detach_client = wf_sat_detach,
68};
69 57
70struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id, 58struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
71 unsigned int *size) 59 unsigned int *size)
@@ -81,13 +69,13 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
81 if (sat_id > 1 || (sat = sats[sat_id]) == NULL) 69 if (sat_id > 1 || (sat = sats[sat_id]) == NULL)
82 return NULL; 70 return NULL;
83 71
84 err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8); 72 err = i2c_smbus_write_word_data(sat->i2c, 8, id << 8);
85 if (err) { 73 if (err) {
86 printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err); 74 printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
87 return NULL; 75 return NULL;
88 } 76 }
89 77
90 err = i2c_smbus_read_word_data(&sat->i2c, 9); 78 err = i2c_smbus_read_word_data(sat->i2c, 9);
91 if (err < 0) { 79 if (err < 0) {
92 printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n"); 80 printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
93 return NULL; 81 return NULL;
@@ -105,7 +93,7 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
105 return NULL; 93 return NULL;
106 94
107 for (i = 0; i < len; i += 4) { 95 for (i = 0; i < len; i += 4) {
108 err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0xa, 4, data); 96 err = i2c_smbus_read_i2c_block_data(sat->i2c, 0xa, 4, data);
109 if (err < 0) { 97 if (err < 0) {
110 printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n", 98 printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
111 err); 99 err);
@@ -138,7 +126,7 @@ static int wf_sat_read_cache(struct wf_sat *sat)
138{ 126{
139 int err; 127 int err;
140 128
141 err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0x3f, 16, sat->cache); 129 err = i2c_smbus_read_i2c_block_data(sat->i2c, 0x3f, 16, sat->cache);
142 if (err < 0) 130 if (err < 0)
143 return err; 131 return err;
144 sat->last_read = jiffies; 132 sat->last_read = jiffies;
@@ -161,7 +149,7 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value)
161 int i, err; 149 int i, err;
162 s32 val; 150 s32 val;
163 151
164 if (sat->i2c.adapter == NULL) 152 if (sat->i2c == NULL)
165 return -ENODEV; 153 return -ENODEV;
166 154
167 mutex_lock(&sat->mutex); 155 mutex_lock(&sat->mutex);
@@ -193,10 +181,6 @@ static void wf_sat_release(struct wf_sensor *sr)
193 struct wf_sat *sat = sens->sat; 181 struct wf_sat *sat = sens->sat;
194 182
195 if (atomic_dec_and_test(&sat->refcnt)) { 183 if (atomic_dec_and_test(&sat->refcnt)) {
196 if (sat->i2c.adapter) {
197 i2c_detach_client(&sat->i2c);
198 sat->i2c.adapter = NULL;
199 }
200 if (sat->nr >= 0) 184 if (sat->nr >= 0)
201 sats[sat->nr] = NULL; 185 sats[sat->nr] = NULL;
202 kfree(sat); 186 kfree(sat);
@@ -212,38 +196,58 @@ static struct wf_sensor_ops wf_sat_ops = {
212 196
213static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev) 197static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
214{ 198{
199 struct i2c_board_info info;
200 struct i2c_client *client;
201 const u32 *reg;
202 u8 addr;
203
204 reg = of_get_property(dev, "reg", NULL);
205 if (reg == NULL)
206 return;
207 addr = *reg;
208 DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
209
210 memset(&info, 0, sizeof(struct i2c_board_info));
211 info.addr = (addr >> 1) & 0x7f;
212 info.platform_data = dev;
213 strlcpy(info.type, "wf_sat", I2C_NAME_SIZE);
214
215 client = i2c_new_device(adapter, &info);
216 if (client == NULL) {
217 printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
218 return;
219 }
220
221 /*
222 * Let i2c-core delete that device on driver removal.
223 * This is safe because i2c-core holds the core_lock mutex for us.
224 */
225 list_add_tail(&client->detected, &client->driver->clients);
226}
227
228static int wf_sat_probe(struct i2c_client *client,
229 const struct i2c_device_id *id)
230{
231 struct device_node *dev = client->dev.platform_data;
215 struct wf_sat *sat; 232 struct wf_sat *sat;
216 struct wf_sat_sensor *sens; 233 struct wf_sat_sensor *sens;
217 const u32 *reg; 234 const u32 *reg;
218 const char *loc, *type; 235 const char *loc, *type;
219 u8 addr, chip, core; 236 u8 chip, core;
220 struct device_node *child; 237 struct device_node *child;
221 int shift, cpu, index; 238 int shift, cpu, index;
222 char *name; 239 char *name;
223 int vsens[2], isens[2]; 240 int vsens[2], isens[2];
224 241
225 reg = of_get_property(dev, "reg", NULL);
226 if (reg == NULL)
227 return;
228 addr = *reg;
229 DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
230
231 sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL); 242 sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL);
232 if (sat == NULL) 243 if (sat == NULL)
233 return; 244 return -ENOMEM;
234 sat->nr = -1; 245 sat->nr = -1;
235 sat->node = of_node_get(dev); 246 sat->node = of_node_get(dev);
236 atomic_set(&sat->refcnt, 0); 247 atomic_set(&sat->refcnt, 0);
237 mutex_init(&sat->mutex); 248 mutex_init(&sat->mutex);
238 sat->i2c.addr = (addr >> 1) & 0x7f; 249 sat->i2c = client;
239 sat->i2c.adapter = adapter; 250 i2c_set_clientdata(client, sat);
240 sat->i2c.driver = &wf_sat_driver;
241 strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1);
242
243 if (i2c_attach_client(&sat->i2c)) {
244 printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
245 goto fail;
246 }
247 251
248 vsens[0] = vsens[1] = -1; 252 vsens[0] = vsens[1] = -1;
249 isens[0] = isens[1] = -1; 253 isens[0] = isens[1] = -1;
@@ -344,10 +348,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
344 if (sat->nr >= 0) 348 if (sat->nr >= 0)
345 sats[sat->nr] = sat; 349 sats[sat->nr] = sat;
346 350
347 return; 351 return 0;
348
349 fail:
350 kfree(sat);
351} 352}
352 353
353static int wf_sat_attach(struct i2c_adapter *adapter) 354static int wf_sat_attach(struct i2c_adapter *adapter)
@@ -366,16 +367,32 @@ static int wf_sat_attach(struct i2c_adapter *adapter)
366 return 0; 367 return 0;
367} 368}
368 369
369static int wf_sat_detach(struct i2c_client *client) 370static int wf_sat_remove(struct i2c_client *client)
370{ 371{
371 struct wf_sat *sat = i2c_to_sat(client); 372 struct wf_sat *sat = i2c_get_clientdata(client);
372 373
373 /* XXX TODO */ 374 /* XXX TODO */
374 375
375 sat->i2c.adapter = NULL; 376 sat->i2c = NULL;
377 i2c_set_clientdata(client, NULL);
376 return 0; 378 return 0;
377} 379}
378 380
381static const struct i2c_device_id wf_sat_id[] = {
382 { "wf_sat", 0 },
383 { }
384};
385
386static struct i2c_driver wf_sat_driver = {
387 .driver = {
388 .name = "wf_smu_sat",
389 },
390 .attach_adapter = wf_sat_attach,
391 .probe = wf_sat_probe,
392 .remove = wf_sat_remove,
393 .id_table = wf_sat_id,
394};
395
379static int __init sat_sensors_init(void) 396static int __init sat_sensors_init(void)
380{ 397{
381 return i2c_add_driver(&wf_sat_driver); 398 return i2c_add_driver(&wf_sat_driver);
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 89fec052f3b4..9118613af321 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -48,6 +48,20 @@ config EEPROM_LEGACY
48 This driver can also be built as a module. If so, the module 48 This driver can also be built as a module. If so, the module
49 will be called eeprom. 49 will be called eeprom.
50 50
51config EEPROM_MAX6875
52 tristate "Maxim MAX6874/5 power supply supervisor"
53 depends on I2C && EXPERIMENTAL
54 help
55 If you say yes here you get read-only support for the user EEPROM of
56 the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
57 sequencer/supervisor.
58
59 All other features of this chip should be accessed via i2c-dev.
60
61 This driver can also be built as a module. If so, the module
62 will be called max6875.
63
64
51config EEPROM_93CX6 65config EEPROM_93CX6
52 tristate "EEPROM 93CX6 support" 66 tristate "EEPROM 93CX6 support"
53 help 67 help
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index 539dd8f88128..df3d68ffa9d1 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -1,4 +1,5 @@
1obj-$(CONFIG_EEPROM_AT24) += at24.o 1obj-$(CONFIG_EEPROM_AT24) += at24.o
2obj-$(CONFIG_EEPROM_AT25) += at25.o 2obj-$(CONFIG_EEPROM_AT25) += at25.o
3obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o 3obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
4obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
4obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o 5obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
diff --git a/drivers/i2c/chips/max6875.c b/drivers/misc/eeprom/max6875.c
index 033d9d81ec8a..3c0c58eed347 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -3,7 +3,7 @@
3 3
4 Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> 4 Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
5 5
6 Based on i2c/chips/eeprom.c 6 Based on eeprom.c
7 7
8 The MAX6875 has a bank of registers and two banks of EEPROM. 8 The MAX6875 has a bank of registers and two banks of EEPROM.
9 Address ranges are defined as follows: 9 Address ranges are defined as follows:
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 89f231dc443f..ff43c8885028 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -1315,7 +1315,6 @@ static int __devinit tdfxfb_setup_i2c_bus(struct tdfxfb_i2c_chan *chan,
1315 1315
1316 strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name)); 1316 strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
1317 chan->adapter.owner = THIS_MODULE; 1317 chan->adapter.owner = THIS_MODULE;
1318 chan->adapter.class = I2C_CLASS_TV_ANALOG;
1319 chan->adapter.algo_data = &chan->algo; 1318 chan->adapter.algo_data = &chan->algo;
1320 chan->adapter.dev.parent = dev; 1319 chan->adapter.dev.parent = dev;
1321 chan->algo.setsda = tdfxfb_i2c_setsda; 1320 chan->algo.setsda = tdfxfb_i2c_setsda;
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 19:57:28 -0500