9 files changed, 205 insertions, 159 deletions

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index f5a4d40000cd..f7e1619b974e 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -75,7 +75,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
         struct e1000_phy_info *phy = &hw->phy;
         s32 ret_val;
 
-        if (hw->media_type != e1000_media_type_copper) {
+        if (hw->phy.media_type != e1000_media_type_copper) {
                 phy->type = e1000_phy_none;
                 return 0;
         }
@@ -195,16 +195,16 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
         case E1000_DEV_ID_82571EB_FIBER:
         case E1000_DEV_ID_82572EI_FIBER:
         case E1000_DEV_ID_82571EB_QUAD_FIBER:
-                hw->media_type = e1000_media_type_fiber;
+                hw->phy.media_type = e1000_media_type_fiber;
                 break;
         case E1000_DEV_ID_82571EB_SERDES:
         case E1000_DEV_ID_82572EI_SERDES:
         case E1000_DEV_ID_82571EB_SERDES_DUAL:
         case E1000_DEV_ID_82571EB_SERDES_QUAD:
-                hw->media_type = e1000_media_type_internal_serdes;
+                hw->phy.media_type = e1000_media_type_internal_serdes;
                 break;
         default:
-                hw->media_type = e1000_media_type_copper;
+                hw->phy.media_type = e1000_media_type_copper;
                 break;
         }
 
@@ -216,7 +216,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
         mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
 
         /* check for link */
-        switch (hw->media_type) {
+        switch (hw->phy.media_type) {
         case e1000_media_type_copper:
                 func->setup_physical_interface = e1000_setup_copper_link_82571;
                 func->check_for_link = e1000e_check_for_copper_link;
@@ -1015,7 +1015,7 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw)
          * set it to full.
          */
         if (hw->mac.type == e1000_82573)
-                hw->mac.fc = e1000_fc_full;
+                hw->fc.type = e1000_fc_full;
 
         return e1000e_setup_link(hw);
 }
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 499adb26dc1b..b941a6b509c4 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -234,6 +234,8 @@ struct e1000_adapter {
 
         unsigned int rx_ps_pages;
         u16 rx_ps_bsize0;
+        u32 max_frame_size;
+        u32 min_frame_size;
 
         /* OS defined structs */
         struct net_device *netdev;
@@ -258,7 +260,7 @@ struct e1000_adapter {
         u32 wol;
         u32 pba;
 
-        u8 fc_autoneg;
+        bool fc_autoneg;
 
         unsigned long led_status;
 
@@ -305,6 +307,7 @@ struct e1000_info {
 #define FLAG_MSI_ENABLED                  (1 << 27)
 #define FLAG_RX_CSUM_ENABLED              (1 << 28)
 #define FLAG_TSO_FORCE                    (1 << 29)
+#define FLAG_RX_RESTART_NOW               (1 << 30)
 
 #define E1000_RX_DESC_PS(R, i)      \
         (&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index df2782473910..e3f4aeefeae2 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -119,7 +119,7 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
         struct e1000_phy_info *phy = &hw->phy;
         s32 ret_val;
 
-        if (hw->media_type != e1000_media_type_copper) {
+        if (hw->phy.media_type != e1000_media_type_copper) {
                 phy->type       = e1000_phy_none;
                 return 0;
         }
@@ -198,10 +198,10 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
         /* Set media type */
         switch (adapter->pdev->device) {
         case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
-                hw->media_type = e1000_media_type_internal_serdes;
+                hw->phy.media_type = e1000_media_type_internal_serdes;
                 break;
         default:
-                hw->media_type = e1000_media_type_copper;
+                hw->phy.media_type = e1000_media_type_copper;
                 break;
         }
 
@@ -213,7 +213,7 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
         mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
 
         /* check for link */
-        switch (hw->media_type) {
+        switch (hw->phy.media_type) {
         case e1000_media_type_copper:
                 func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
                 func->check_for_link = e1000e_check_for_copper_link;
@@ -591,7 +591,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 
         udelay(1);
 
-        if (hw->phy.wait_for_link) {
+        if (hw->phy.autoneg_wait_to_complete) {
                 hw_dbg(hw, "Waiting for forced speed/duplex link "
                          "on GG82563 phy.\n");
 
@@ -682,7 +682,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
 {
         s32 ret_val;
 
-        if (hw->media_type == e1000_media_type_copper) {
+        if (hw->phy.media_type == e1000_media_type_copper) {
                 ret_val = e1000e_get_speed_and_duplex_copper(hw,
                                                                     speed,
                                                                     duplex);
@@ -854,7 +854,7 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
         /* Transmit Arbitration Control 0 */
         reg = er32(TARC0);
         reg &= ~(0xF << 27); /* 30:27 */
-        if (hw->media_type != e1000_media_type_copper)
+        if (hw->phy.media_type != e1000_media_type_copper)
                 reg &= ~(1 << 20);
         ew32(TARC0, reg);
 
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 3b94a87b5272..4ae00567bba6 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -111,7 +111,7 @@ static int e1000_get_settings(struct net_device *netdev,
         struct e1000_hw *hw = &adapter->hw;
         u32 status;
 
-        if (hw->media_type == e1000_media_type_copper) {
+        if (hw->phy.media_type == e1000_media_type_copper) {
 
                 ecmd->supported = (SUPPORTED_10baseT_Half |
                                    SUPPORTED_10baseT_Full |
@@ -165,7 +165,7 @@ static int e1000_get_settings(struct net_device *netdev,
                 ecmd->duplex = -1;
         }
 
-        ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+        ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
                          hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
         return 0;
 }
@@ -187,7 +187,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
         mac->autoneg = 0;
 
         /* Fiber NICs only allow 1000 gbps Full duplex */
-        if ((adapter->hw.media_type == e1000_media_type_fiber) &&
+        if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
                 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
                 ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
                          "configuration\n");
@@ -241,7 +241,7 @@ static int e1000_set_settings(struct net_device *netdev,
 
         if (ecmd->autoneg == AUTONEG_ENABLE) {
                 hw->mac.autoneg = 1;
-                if (hw->media_type == e1000_media_type_fiber)
+                if (hw->phy.media_type == e1000_media_type_fiber)
                         hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
                                                      ADVERTISED_FIBRE |
                                                      ADVERTISED_Autoneg;
@@ -250,6 +250,8 @@ static int e1000_set_settings(struct net_device *netdev,
                                                      ADVERTISED_TP |
                                                      ADVERTISED_Autoneg;
                 ecmd->advertising = hw->phy.autoneg_advertised;
+                if (adapter->fc_autoneg)
+                        hw->fc.original_type = e1000_fc_default;
         } else {
                 if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
                         clear_bit(__E1000_RESETTING, &adapter->state);
@@ -279,11 +281,11 @@ static void e1000_get_pauseparam(struct net_device *netdev,
         pause->autoneg =
                 (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
 
-        if (hw->mac.fc == e1000_fc_rx_pause) {
+        if (hw->fc.type == e1000_fc_rx_pause) {
                 pause->rx_pause = 1;
-        } else if (hw->mac.fc == e1000_fc_tx_pause) {
+        } else if (hw->fc.type == e1000_fc_tx_pause) {
                 pause->tx_pause = 1;
-        } else if (hw->mac.fc == e1000_fc_full) {
+        } else if (hw->fc.type == e1000_fc_full) {
                 pause->rx_pause = 1;
                 pause->tx_pause = 1;
         }
@@ -302,18 +304,18 @@ static int e1000_set_pauseparam(struct net_device *netdev,
                 msleep(1);
 
         if (pause->rx_pause && pause->tx_pause)
-                hw->mac.fc = e1000_fc_full;
+                hw->fc.type = e1000_fc_full;
         else if (pause->rx_pause && !pause->tx_pause)
-                hw->mac.fc = e1000_fc_rx_pause;
+                hw->fc.type = e1000_fc_rx_pause;
         else if (!pause->rx_pause && pause->tx_pause)
-                hw->mac.fc = e1000_fc_tx_pause;
+                hw->fc.type = e1000_fc_tx_pause;
         else if (!pause->rx_pause && !pause->tx_pause)
-                hw->mac.fc = e1000_fc_none;
+                hw->fc.type = e1000_fc_none;
 
-        hw->mac.original_fc = hw->mac.fc;
+        hw->fc.original_type = hw->fc.type;
 
         if (adapter->fc_autoneg == AUTONEG_ENABLE) {
-                hw->mac.fc = e1000_fc_default;
+                hw->fc.type = e1000_fc_default;
                 if (netif_running(adapter->netdev)) {
                         e1000e_down(adapter);
                         e1000e_up(adapter);
@@ -321,7 +323,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
                         e1000e_reset(adapter);
                 }
         } else {
-                retval = ((hw->media_type == e1000_media_type_fiber) ?
+                retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
                           hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
         }
 
@@ -1187,21 +1189,21 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
         u32 ctrl_reg = 0;
         u32 stat_reg = 0;
 
-        adapter->hw.mac.autoneg = 0;
+        hw->mac.autoneg = 0;
 
-        if (adapter->hw.phy.type == e1000_phy_m88) {
+        if (hw->phy.type == e1000_phy_m88) {
                 /* Auto-MDI/MDIX Off */
                 e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
                 /* reset to update Auto-MDI/MDIX */
                 e1e_wphy(hw, PHY_CONTROL, 0x9140);
                 /* autoneg off */
                 e1e_wphy(hw, PHY_CONTROL, 0x8140);
-        } else if (adapter->hw.phy.type == e1000_phy_gg82563)
+        } else if (hw->phy.type == e1000_phy_gg82563)
                 e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
 
         ctrl_reg = er32(CTRL);
 
-        if (adapter->hw.phy.type == e1000_phy_ife) {
+        if (hw->phy.type == e1000_phy_ife) {
                 /* force 100, set loopback */
                 e1e_wphy(hw, PHY_CONTROL, 0x6100);
 
@@ -1224,8 +1226,8 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
                              E1000_CTRL_FD);     /* Force Duplex to FULL */
         }
 
-        if (adapter->hw.media_type == e1000_media_type_copper &&
-           adapter->hw.phy.type == e1000_phy_m88) {
+        if (hw->phy.media_type == e1000_media_type_copper &&
+            hw->phy.type == e1000_phy_m88) {
                 ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
         } else {
                 /*
@@ -1243,7 +1245,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
          * Disable the receiver on the PHY so when a cable is plugged in, the
          * PHY does not begin to autoneg when a cable is reconnected to the NIC.
          */
-        if (adapter->hw.phy.type == e1000_phy_m88)
+        if (hw->phy.type == e1000_phy_m88)
                 e1000_phy_disable_receiver(adapter);
 
         udelay(500);
@@ -1333,8 +1335,8 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
         struct e1000_hw *hw = &adapter->hw;
         u32 rctl;
 
-        if (hw->media_type == e1000_media_type_fiber ||
-            hw->media_type == e1000_media_type_internal_serdes) {
+        if (hw->phy.media_type == e1000_media_type_fiber ||
+            hw->phy.media_type == e1000_media_type_internal_serdes) {
                 switch (hw->mac.type) {
                 case e1000_80003es2lan:
                         return e1000_set_es2lan_mac_loopback(adapter);
@@ -1349,7 +1351,7 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
                         ew32(RCTL, rctl);
                         return 0;
                 }
-        } else if (hw->media_type == e1000_media_type_copper) {
+        } else if (hw->phy.media_type == e1000_media_type_copper) {
                 return e1000_integrated_phy_loopback(adapter);
         }
 
@@ -1368,8 +1370,8 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 
         switch (hw->mac.type) {
         case e1000_80003es2lan:
-                if (hw->media_type == e1000_media_type_fiber ||
-                    hw->media_type == e1000_media_type_internal_serdes) {
+                if (hw->phy.media_type == e1000_media_type_fiber ||
+                    hw->phy.media_type == e1000_media_type_internal_serdes) {
                         /* restore CTRL_EXT, stealing space from tx_fifo_head */
                         ew32(CTRL_EXT, adapter->tx_fifo_head);
                         adapter->tx_fifo_head = 0;
@@ -1377,8 +1379,8 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
                 /* fall through */
         case e1000_82571:
         case e1000_82572:
-                if (hw->media_type == e1000_media_type_fiber ||
-                    hw->media_type == e1000_media_type_internal_serdes) {
+                if (hw->phy.media_type == e1000_media_type_fiber ||
+                    hw->phy.media_type == e1000_media_type_internal_serdes) {
 #define E1000_SERDES_LB_OFF 0x400
                         ew32(SCTL, E1000_SERDES_LB_OFF);
                         msleep(10);
@@ -1528,7 +1530,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
         struct e1000_hw *hw = &adapter->hw;
 
         *data = 0;
-        if (hw->media_type == e1000_media_type_internal_serdes) {
+        if (hw->phy.media_type == e1000_media_type_internal_serdes) {
                 int i = 0;
                 hw->mac.serdes_has_link = 0;
 
@@ -1624,9 +1626,9 @@ static void e1000_diag_test(struct net_device *netdev,
                 adapter->hw.mac.autoneg = autoneg;
 
                 /* force this routine to wait until autoneg complete/timeout */
-                adapter->hw.phy.wait_for_link = 1;
+                adapter->hw.phy.autoneg_wait_to_complete = 1;
                 e1000e_reset(adapter);
-                adapter->hw.phy.wait_for_link = 0;
+                adapter->hw.phy.autoneg_wait_to_complete = 0;
 
                 clear_bit(__E1000_TESTING, &adapter->state);
                 if (if_running)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index b582d78f0531..0b4145a73229 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -400,7 +400,7 @@ enum e1000_rev_polarity{
         e1000_rev_polarity_undefined = 0xFF
 };
 
-enum e1000_fc_mode {
+enum e1000_fc_type {
         e1000_fc_none = 0,
         e1000_fc_rx_pause,
         e1000_fc_tx_pause,
@@ -727,16 +727,12 @@ struct e1000_mac_info {
         u8 perm_addr[6];
 
         enum e1000_mac_type type;
-        enum e1000_fc_mode  fc;
-        enum e1000_fc_mode  original_fc;
 
         u32 collision_delta;
         u32 ledctl_default;
         u32 ledctl_mode1;
         u32 ledctl_mode2;
-        u32 max_frame_size;
         u32 mc_filter_type;
-        u32 min_frame_size;
         u32 tx_packet_delta;
         u32 txcw;
 
@@ -747,9 +743,6 @@ struct e1000_mac_info {
         u16 ifs_step_size;
         u16 mta_reg_count;
         u16 rar_entry_count;
-        u16 fc_high_water;
-        u16 fc_low_water;
-        u16 fc_pause_time;
 
         u8  forced_speed_duplex;
 
@@ -779,6 +772,8 @@ struct e1000_phy_info {
         u32 reset_delay_us; /* in usec */
         u32 revision;
 
+        enum e1000_media_type media_type;
+
         u16 autoneg_advertised;
         u16 autoneg_mask;
         u16 cable_length;
@@ -791,7 +786,7 @@ struct e1000_phy_info {
         bool is_mdix;
         bool polarity_correction;
         bool speed_downgraded;
-        bool wait_for_link;
+        bool autoneg_wait_to_complete;
 };
 
 struct e1000_nvm_info {
@@ -816,6 +811,16 @@ struct e1000_bus_info {
         u16 func;
 };
 
+struct e1000_fc_info {
+        u32 high_water;          /* Flow control high-water mark */
+        u32 low_water;           /* Flow control low-water mark */
+        u16 pause_time;          /* Flow control pause timer */
+        bool send_xon;           /* Flow control send XON */
+        bool strict_ieee;        /* Strict IEEE mode */
+        enum e1000_fc_type type; /* Type of flow control */
+        enum e1000_fc_type original_type;
+};
+
 struct e1000_dev_spec_82571 {
         bool laa_is_present;
         bool alt_mac_addr_is_present;
@@ -840,6 +845,7 @@ struct e1000_hw {
         u8 __iomem *flash_address;
 
         struct e1000_mac_info  mac;
+        struct e1000_fc_info   fc;
         struct e1000_phy_info  phy;
         struct e1000_nvm_info  nvm;
         struct e1000_bus_info  bus;
@@ -849,8 +855,6 @@ struct e1000_hw {
                 struct e1000_dev_spec_82571     e82571;
                 struct e1000_dev_spec_ich8lan   ich8lan;
         } dev_spec;
-
-        enum e1000_media_type media_type;
 };
 
 #ifdef DEBUG
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index eed1b449691a..e358a773e67a 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -298,7 +298,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
         struct e1000_mac_info *mac = &hw->mac;
 
         /* Set media type function pointer */
-        hw->media_type = e1000_media_type_copper;
+        hw->phy.media_type = e1000_media_type_copper;
 
         /* Set mta register count */
         mac->mta_reg_count = 32;
@@ -453,7 +453,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
 
         udelay(1);
 
-        if (phy->wait_for_link) {
+        if (phy->autoneg_wait_to_complete) {
                 hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n");
 
                 ret_val = e1000e_phy_has_link_generic(hw,
@@ -1852,7 +1852,6 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 {
-        struct e1000_mac_info *mac = &hw->mac;
         s32 ret_val;
 
         if (e1000_check_reset_block(hw))
@@ -1863,19 +1862,19 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
          * the default flow control setting, so we explicitly
          * set it to full.
          */
-        if (mac->fc == e1000_fc_default)
-                mac->fc = e1000_fc_full;
+        if (hw->fc.type == e1000_fc_default)
+                hw->fc.type = e1000_fc_full;
 
-        mac->original_fc = mac->fc;
+        hw->fc.original_type = hw->fc.type;
 
-        hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", mac->fc);
+        hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type);
 
         /* Continue to configure the copper link. */
         ret_val = e1000_setup_copper_link_ich8lan(hw);
         if (ret_val)
                 return ret_val;
 
-        ew32(FCTTV, mac->fc_pause_time);
+        ew32(FCTTV, hw->fc.pause_time);
 
         return e1000e_set_fc_watermarks(hw);
 }
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 9c3ce719e8da..ea3ff6369c86 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -603,7 +603,6 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
  **/
 static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
 {
-        struct e1000_mac_info *mac = &hw->mac;
         s32 ret_val;
         u16 nvm_data;
 
@@ -624,12 +623,12 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
         }
 
         if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
-                mac->fc = e1000_fc_none;
+                hw->fc.type = e1000_fc_none;
         else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
                  NVM_WORD0F_ASM_DIR)
-                mac->fc = e1000_fc_tx_pause;
+                hw->fc.type = e1000_fc_tx_pause;
         else
-                mac->fc = e1000_fc_full;
+                hw->fc.type = e1000_fc_full;
 
         return 0;
 }
@@ -660,7 +659,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
          * If flow control is set to default, set flow control based on
          * the EEPROM flow control settings.
          */
-        if (mac->fc == e1000_fc_default) {
+        if (hw->fc.type == e1000_fc_default) {
                 ret_val = e1000_set_default_fc_generic(hw);
                 if (ret_val)
                         return ret_val;
@@ -671,9 +670,9 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
          * in case we get disconnected and then reconnected into a different
          * hub or switch with different Flow Control capabilities.
          */
-        mac->original_fc = mac->fc;
+        hw->fc.original_type = hw->fc.type;
 
-        hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", mac->fc);
+        hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type);
 
         /* Call the necessary media_type subroutine to configure the link. */
         ret_val = mac->ops.setup_physical_interface(hw);
@@ -691,7 +690,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
         ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
         ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
 
-        ew32(FCTTV, mac->fc_pause_time);
+        ew32(FCTTV, hw->fc.pause_time);
 
         return e1000e_set_fc_watermarks(hw);
 }
@@ -725,7 +724,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
          *        do not support receiving pause frames).
          *      3:  Both Rx and Tx flow control (symmetric) are enabled.
          */
-        switch (mac->fc) {
+        switch (hw->fc.type) {
         case e1000_fc_none:
                 /* Flow control completely disabled by a software over-ride. */
                 txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
@@ -857,7 +856,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
          * detect a signal.  If we have a signal, then poll for a "Link-Up"
          * indication.
          */
-        if (hw->media_type == e1000_media_type_internal_serdes ||
+        if (hw->phy.media_type == e1000_media_type_internal_serdes ||
             (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
                 ret_val = e1000_poll_fiber_serdes_link_generic(hw);
         } else {
@@ -898,7 +897,6 @@ void e1000e_config_collision_dist(struct e1000_hw *hw)
  **/
 s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
 {
-        struct e1000_mac_info *mac = &hw->mac;
         u32 fcrtl = 0, fcrth = 0;
 
         /*
@@ -908,15 +906,15 @@ s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
          * ability to transmit pause frames is not enabled, then these
          * registers will be set to 0.
          */
-        if (mac->fc & e1000_fc_tx_pause) {
+        if (hw->fc.type & e1000_fc_tx_pause) {
                 /*
                  * We need to set up the Receive Threshold high and low water
                  * marks as well as (optionally) enabling the transmission of
                  * XON frames.
                  */
-                fcrtl = mac->fc_low_water;
+                fcrtl = hw->fc.low_water;
                 fcrtl |= E1000_FCRTL_XONE;
-                fcrth = mac->fc_high_water;
+                fcrth = hw->fc.high_water;
         }
         ew32(FCRTL, fcrtl);
         ew32(FCRTH, fcrth);
@@ -936,7 +934,6 @@ s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
  **/
 s32 e1000e_force_mac_fc(struct e1000_hw *hw)
 {
-        struct e1000_mac_info *mac = &hw->mac;
         u32 ctrl;
 
         ctrl = er32(CTRL);
@@ -948,7 +945,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
          * receive flow control.
          *
          * The "Case" statement below enables/disable flow control
-         * according to the "mac->fc" parameter.
+         * according to the "hw->fc.type" parameter.
          *
          * The possible values of the "fc" parameter are:
          *      0:  Flow control is completely disabled
@@ -959,9 +956,9 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
          *      3:  Both Rx and Tx flow control (symmetric) is enabled.
          *  other:  No other values should be possible at this point.
          */
-        hw_dbg(hw, "mac->fc = %u\n", mac->fc);
+        hw_dbg(hw, "hw->fc.type = %u\n", hw->fc.type);
 
-        switch (mac->fc) {
+        switch (hw->fc.type) {
         case e1000_fc_none:
                 ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
                 break;
@@ -1009,11 +1006,11 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
          * configuration of the MAC to match the "fc" parameter.
          */
         if (mac->autoneg_failed) {
-                if (hw->media_type == e1000_media_type_fiber ||
-                    hw->media_type == e1000_media_type_internal_serdes)
+                if (hw->phy.media_type == e1000_media_type_fiber ||
+                    hw->phy.media_type == e1000_media_type_internal_serdes)
                         ret_val = e1000e_force_mac_fc(hw);
         } else {
-                if (hw->media_type == e1000_media_type_copper)
+                if (hw->phy.media_type == e1000_media_type_copper)
                         ret_val = e1000e_force_mac_fc(hw);
         }
 
@@ -1028,7 +1025,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
          * has completed, and if so, how the PHY and link partner has
          * flow control configured.
          */
-        if ((hw->media_type == e1000_media_type_copper) && mac->autoneg) {
+        if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
                 /*
                  * Read the MII Status Register and check to see if AutoNeg
                  * has completed.  We read this twice because this reg has
@@ -1105,11 +1102,11 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                          * ONLY. Hence, we must now check to see if we need to
                          * turn OFF  the TRANSMISSION of PAUSE frames.
                          */
-                        if (mac->original_fc == e1000_fc_full) {
-                                mac->fc = e1000_fc_full;
+                        if (hw->fc.original_type == e1000_fc_full) {
+                                hw->fc.type = e1000_fc_full;
                                 hw_dbg(hw, "Flow Control = FULL.\r\n");
                         } else {
-                                mac->fc = e1000_fc_rx_pause;
+                                hw->fc.type = e1000_fc_rx_pause;
                                 hw_dbg(hw, "Flow Control = "
                                          "RX PAUSE frames only.\r\n");
                         }
@@ -1127,8 +1124,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                           (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
                           (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
                           (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-                        mac->fc = e1000_fc_tx_pause;
-                        hw_dbg(hw, "Flow Control = TX PAUSE frames only.\r\n");
+                        hw->fc.type = e1000_fc_tx_pause;
+                        hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n");
                 }
                 /*
                  * For transmitting PAUSE frames ONLY.
@@ -1143,14 +1140,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                          (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
                          !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
                          (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-                        mac->fc = e1000_fc_rx_pause;
-                        hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
+                        hw->fc.type = e1000_fc_rx_pause;
+                        hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n");
                 } else {
                         /*
                          * Per the IEEE spec, at this point flow control
                          * should be disabled.
                          */
-                        mac->fc = e1000_fc_none;
+                        hw->fc.type = e1000_fc_none;
                         hw_dbg(hw, "Flow Control = NONE.\r\n");
                 }
 
@@ -1166,7 +1163,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                 }
 
                 if (duplex == HALF_DUPLEX)
-                        mac->fc = e1000_fc_none;
+                        hw->fc.type = e1000_fc_none;
 
                 /*
                  * Now we call a subroutine to actually force the MAC
@@ -1436,7 +1433,7 @@ s32 e1000e_blink_led(struct e1000_hw *hw)
         u32 ledctl_blink = 0;
         u32 i;
 
-        if (hw->media_type == e1000_media_type_fiber) {
+        if (hw->phy.media_type == e1000_media_type_fiber) {
                 /* always blink LED0 for PCI-E fiber */
                 ledctl_blink = E1000_LEDCTL_LED0_BLINK |
                      (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
@@ -1468,7 +1465,7 @@ s32 e1000e_led_on_generic(struct e1000_hw *hw)
 {
         u32 ctrl;
 
-        switch (hw->media_type) {
+        switch (hw->phy.media_type) {
         case e1000_media_type_fiber:
                 ctrl = er32(CTRL);
                 ctrl &= ~E1000_CTRL_SWDPIN0;
@@ -1495,7 +1492,7 @@ s32 e1000e_led_off_generic(struct e1000_hw *hw)
 {
         u32 ctrl;
 
-        switch (hw->media_type) {
+        switch (hw->phy.media_type) {
         case e1000_media_type_fiber:
                 ctrl = er32(CTRL);
                 ctrl |= E1000_CTRL_SWDPIN0;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 2e07534c35f7..d70bde03619e 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -878,6 +878,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
                         /* disable receives */
                         u32 rctl = er32(RCTL);
                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
+                        adapter->flags |= FLAG_RX_RESTART_NOW;
                 }
                 /* guard against interrupt when we're going down */
                 if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -944,6 +945,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
                         /* disable receives */
                         rctl = er32(RCTL);
                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
+                        adapter->flags |= FLAG_RX_RESTART_NOW;
                 }
                 /* guard against interrupt when we're going down */
                 if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -1794,6 +1796,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
         }
 
         ew32(RCTL, rctl);
+        /* just started the receive unit, no need to restart */
+        adapter->flags &= ~FLAG_RX_RESTART_NOW;
 }
 
 /**
@@ -2003,7 +2007,7 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter)
         u16 mii_reg = 0;
 
         /* Just clear the power down bit to wake the phy back up */
-        if (adapter->hw.media_type == e1000_media_type_copper) {
+        if (adapter->hw.phy.media_type == e1000_media_type_copper) {
                 /*
                  * According to the manual, the phy will retain its
                  * settings across a power-down/up cycle
@@ -2032,7 +2036,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
                 return;
 
         /* non-copper PHY? */
-        if (adapter->hw.media_type != e1000_media_type_copper)
+        if (adapter->hw.phy.media_type != e1000_media_type_copper)
                 return;
 
         /* reset is blocked because of a SoL/IDER session */
@@ -2061,15 +2065,16 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
 void e1000e_reset(struct e1000_adapter *adapter)
 {
         struct e1000_mac_info *mac = &adapter->hw.mac;
+        struct e1000_fc_info *fc = &adapter->hw.fc;
         struct e1000_hw *hw = &adapter->hw;
         u32 tx_space, min_tx_space, min_rx_space;
-        u32 pba;
+        u32 pba = adapter->pba;
         u16 hwm;
 
         /* reset Packet Buffer Allocation to default */
-        ew32(PBA, adapter->pba);
+        ew32(PBA, pba);
 
-        if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) {
+        if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
                 /*
                  * To maintain wire speed transmits, the Tx FIFO should be
                  * large enough to accommodate two full transmit packets,
@@ -2086,13 +2091,14 @@ void e1000e_reset(struct e1000_adapter *adapter)
                 /*
                  * the Tx fifo also stores 16 bytes of information about the tx
                  * but don't include ethernet FCS because hardware appends it
-                 */             min_tx_space = (mac->max_frame_size +
+                 */
+                min_tx_space = (adapter->max_frame_size +
                                 sizeof(struct e1000_tx_desc) -
                                 ETH_FCS_LEN) * 2;
                 min_tx_space = ALIGN(min_tx_space, 1024);
                 min_tx_space >>= 10;
                 /* software strips receive CRC, so leave room for it */
-                min_rx_space = mac->max_frame_size;
+                min_rx_space = adapter->max_frame_size;
                 min_rx_space = ALIGN(min_rx_space, 1024);
                 min_rx_space >>= 10;
 
@@ -2131,20 +2137,21 @@ void e1000e_reset(struct e1000_adapter *adapter)
          * - the full Rx FIFO size minus one full frame
          */
         if (adapter->flags & FLAG_HAS_ERT)
-                hwm = min(((adapter->pba << 10) * 9 / 10),
-                          ((adapter->pba << 10) - (E1000_ERT_2048 << 3)));
+                hwm = min(((pba << 10) * 9 / 10),
+                          ((pba << 10) - (E1000_ERT_2048 << 3)));
         else
-                hwm = min(((adapter->pba << 10) * 9 / 10),
-                          ((adapter->pba << 10) - mac->max_frame_size));
+                hwm = min(((pba << 10) * 9 / 10),
+                          ((pba << 10) - adapter->max_frame_size));
 
-        mac->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
-        mac->fc_low_water = mac->fc_high_water - 8;
+        fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
+        fc->low_water = fc->high_water - 8;
 
         if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
-                mac->fc_pause_time = 0xFFFF;
+                fc->pause_time = 0xFFFF;
         else
-                mac->fc_pause_time = E1000_FC_PAUSE_TIME;
-        mac->fc = mac->original_fc;
+                fc->pause_time = E1000_FC_PAUSE_TIME;
+        fc->send_xon = 1;
+        fc->type = fc->original_type;
 
         /* Allow time for pending master requests to run */
         mac->ops.reset_hw(hw);
@@ -2259,13 +2266,12 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
  **/
 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 {
-        struct e1000_hw *hw = &adapter->hw;
         struct net_device *netdev = adapter->netdev;
 
         adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
         adapter->rx_ps_bsize0 = 128;
-        hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
-        hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+        adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+        adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
 
         adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
         if (!adapter->tx_ring)
@@ -2611,7 +2617,7 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
         /* Tx Dropped needs to be maintained elsewhere */
 
         /* Phy Stats */
-        if (hw->media_type == e1000_media_type_copper) {
+        if (hw->phy.media_type == e1000_media_type_copper) {
                 if ((adapter->link_speed == SPEED_1000) &&
                    (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) {
                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
@@ -2629,8 +2635,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 
 static void e1000_print_link_info(struct e1000_adapter *adapter)
 {
-        struct net_device *netdev = adapter->netdev;
         struct e1000_hw *hw = &adapter->hw;
+        struct net_device *netdev = adapter->netdev;
         u32 ctrl = er32(CTRL);
 
         ndev_info(netdev,
@@ -2644,6 +2650,62 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
                 ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
+static bool e1000_has_link(struct e1000_adapter *adapter)
+{
+        struct e1000_hw *hw = &adapter->hw;
+        bool link_active = 0;
+        s32 ret_val = 0;
+
+        /*
+         * get_link_status is set on LSC (link status) interrupt or
+         * Rx sequence error interrupt.  get_link_status will stay
+         * false until the check_for_link establishes link
+         * for copper adapters ONLY
+         */
+        switch (hw->phy.media_type) {
+        case e1000_media_type_copper:
+                if (hw->mac.get_link_status) {
+                        ret_val = hw->mac.ops.check_for_link(hw);
+                        link_active = !hw->mac.get_link_status;
+                } else {
+                        link_active = 1;
+                }
+                break;
+        case e1000_media_type_fiber:
+                ret_val = hw->mac.ops.check_for_link(hw);
+                link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+                break;
+        case e1000_media_type_internal_serdes:
+                ret_val = hw->mac.ops.check_for_link(hw);
+                link_active = adapter->hw.mac.serdes_has_link;
+                break;
+        default:
+        case e1000_media_type_unknown:
+                break;
+        }
+
+        if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+            (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+                /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
+                ndev_info(adapter->netdev,
+                          "Gigabit has been disabled, downgrading speed\n");
+        }
+
+        return link_active;
+}
+
+static void e1000e_enable_receives(struct e1000_adapter *adapter)
+{
+        /* make sure the receive unit is started */
+        if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
+            (adapter->flags & FLAG_RX_RESTART_NOW)) {
+                struct e1000_hw *hw = &adapter->hw;
+                u32 rctl = er32(RCTL);
+                ew32(RCTL, rctl | E1000_RCTL_EN);
+                adapter->flags &= ~FLAG_RX_RESTART_NOW;
+        }
+}
+
 /**
  * e1000_watchdog - Timer Call-back
  * @data: pointer to adapter cast into an unsigned long
@@ -2662,42 +2724,27 @@ static void e1000_watchdog_task(struct work_struct *work)
 {
         struct e1000_adapter *adapter = container_of(work,
                                         struct e1000_adapter, watchdog_task);
-
         struct net_device *netdev = adapter->netdev;
         struct e1000_mac_info *mac = &adapter->hw.mac;
         struct e1000_ring *tx_ring = adapter->tx_ring;
         struct e1000_hw *hw = &adapter->hw;
         u32 link, tctl;
-        s32 ret_val;
         int tx_pending = 0;
 
-        if ((netif_carrier_ok(netdev)) &&
-            (er32(STATUS) & E1000_STATUS_LU))
+        link = e1000_has_link(adapter);
+        if ((netif_carrier_ok(netdev)) && link) {
+                e1000e_enable_receives(adapter);
                 goto link_up;
-
-        ret_val = mac->ops.check_for_link(hw);
-        if ((ret_val == E1000_ERR_PHY) &&
-            (adapter->hw.phy.type == e1000_phy_igp_3) &&
-            (er32(CTRL) &
-             E1000_PHY_CTRL_GBE_DISABLE)) {
-                /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
-                ndev_info(netdev,
-                        "Gigabit has been disabled, downgrading speed\n");
         }
 
         if ((e1000e_enable_tx_pkt_filtering(hw)) &&
             (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
                 e1000_update_mng_vlan(adapter);
 
-        if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
-           !(er32(TXCW) & E1000_TXCW_ANE))
-                link = adapter->hw.mac.serdes_has_link;
-        else
-                link = er32(STATUS) & E1000_STATUS_LU;
-
         if (link) {
                 if (!netif_carrier_ok(netdev)) {
                         bool txb2b = 1;
+                        /* update snapshot of PHY registers on LSC */
                         mac->ops.get_link_up_info(&adapter->hw,
                                                    &adapter->link_speed,
                                                    &adapter->link_duplex);
@@ -2770,13 +2817,6 @@ static void e1000_watchdog_task(struct work_struct *work)
                         if (!test_bit(__E1000_DOWN, &adapter->state))
                                 mod_timer(&adapter->phy_info_timer,
                                           round_jiffies(jiffies + 2 * HZ));
-                } else {
-                        /* make sure the receive unit is started */
-                        if (adapter->flags & FLAG_RX_NEEDS_RESTART) {
-                                u32 rctl = er32(RCTL);
-                                ew32(RCTL, rctl |
-                                                E1000_RCTL_EN);
-                        }
                 }
         } else {
                 if (netif_carrier_ok(netdev)) {
@@ -3413,7 +3453,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
                 msleep(1);
         /* e1000e_down has a dependency on max_frame_size */
-        adapter->hw.mac.max_frame_size = max_frame;
+        adapter->max_frame_size = max_frame;
         if (netif_running(netdev))
                 e1000e_down(adapter);
 
@@ -3462,7 +3502,7 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
         struct mii_ioctl_data *data = if_mii(ifr);
         unsigned long irq_flags;
 
-        if (adapter->hw.media_type != e1000_media_type_copper)
+        if (adapter->hw.phy.media_type != e1000_media_type_copper)
                 return -EOPNOTSUPP;
 
         switch (cmd) {
@@ -3544,8 +3584,9 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
                         E1000_CTRL_EN_PHY_PWR_MGMT;
                 ew32(CTRL, ctrl);
 
-                if (adapter->hw.media_type == e1000_media_type_fiber ||
-                   adapter->hw.media_type == e1000_media_type_internal_serdes) {
+                if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
+                    adapter->hw.phy.media_type ==
+                    e1000_media_type_internal_serdes) {
                         /* keep the laser running in D3 */
                         ctrl_ext = er32(CTRL_EXT);
                         ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
@@ -3939,10 +3980,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
         hw->mac.ops.get_bus_info(&adapter->hw);
 
-        adapter->hw.phy.wait_for_link = 0;
+        adapter->hw.phy.autoneg_wait_to_complete = 0;
 
         /* Copper options */
-        if (adapter->hw.media_type == e1000_media_type_copper) {
+        if (adapter->hw.phy.media_type == e1000_media_type_copper) {
                 adapter->hw.phy.mdix = AUTO_ALL_MODES;
                 adapter->hw.phy.disable_polarity_correction = 0;
                 adapter->hw.phy.ms_type = e1000_ms_hw_default;
@@ -4028,8 +4069,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
         /* Initialize link parameters. User can change them with ethtool */
         adapter->hw.mac.autoneg = 1;
         adapter->fc_autoneg = 1;
-        adapter->hw.mac.original_fc = e1000_fc_default;
-        adapter->hw.mac.fc = e1000_fc_default;
+        adapter->hw.fc.original_type = e1000_fc_default;
+        adapter->hw.fc.type = e1000_fc_default;
         adapter->hw.phy.autoneg_advertised = 0x2f;
 
         /* ring size defaults */
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index a2da1c422354..3a4574caa75b 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -714,7 +714,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
          *  other:  No software override.  The flow control configuration
          *        in the EEPROM is used.
          */
-        switch (hw->mac.fc) {
+        switch (hw->fc.type) {
         case e1000_fc_none:
                 /*
                  * Flow control (Rx & Tx) is completely disabled by a
@@ -822,7 +822,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
          * Does the user want to wait for Auto-Neg to complete here, or
          * check at a later time (for example, callback routine).
          */
-        if (phy->wait_for_link) {
+        if (phy->autoneg_wait_to_complete) {
                 ret_val = e1000_wait_autoneg(hw);
                 if (ret_val) {
                         hw_dbg(hw, "Error while waiting for "
@@ -937,7 +937,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 
         udelay(1);
 
-        if (phy->wait_for_link) {
+        if (phy->autoneg_wait_to_complete) {
                 hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
 
                 ret_val = e1000e_phy_has_link_generic(hw,
@@ -1009,7 +1009,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 
         udelay(1);
 
-        if (phy->wait_for_link) {
+        if (phy->autoneg_wait_to_complete) {
                 hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
 
                 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
@@ -1084,7 +1084,7 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
         u32 ctrl;
 
         /* Turn off flow control when forcing speed/duplex */
-        mac->fc = e1000_fc_none;
+        hw->fc.type = e1000_fc_none;
 
         /* Force speed/duplex on the mac */
         ctrl = er32(CTRL);
@@ -1508,7 +1508,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
         u16 phy_data;
         bool link;
 
-        if (hw->media_type != e1000_media_type_copper) {
+        if (hw->phy.media_type != e1000_media_type_copper) {
                 hw_dbg(hw, "Phy info is only valid for copper media\n");
                 return -E1000_ERR_CONFIG;
         }