2 files changed, 61 insertions, 27 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
index 16695d9cf1e8..66788fda1db3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -11,6 +11,11 @@ Required properties:
 - interrupt-controller: Mark the device node as an interrupt controller
   The first cell is the GPIO number.
   The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
 
 Example:
 
@@ -20,4 +25,5 @@ twl_gpio: gpio {
     gpio-controller;
     #interrupt-cells = <2>;
     interrupt-controller;
+    ti,use-leds;
 };
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe7bf36..f923252da839 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -395,6 +395,31 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
 
 static int gpio_twl4030_remove(struct platform_device *pdev);
 
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+{
+        struct twl4030_gpio_platform_data *omap_twl_info;
+
+        omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
+        if (!omap_twl_info)
+                return NULL;
+
+        omap_twl_info->gpio_base = -1;
+
+        omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
+                        "ti,use-leds");
+
+        of_property_read_u32(dev->of_node, "ti,debounce",
+                             &omap_twl_info->debounce);
+        of_property_read_u32(dev->of_node, "ti,mmc-cd",
+                             (u32 *)&omap_twl_info->mmc_cd);
+        of_property_read_u32(dev->of_node, "ti,pullups",
+                             &omap_twl_info->pullups);
+        of_property_read_u32(dev->of_node, "ti,pulldowns",
+                             &omap_twl_info->pulldowns);
+
+        return omap_twl_info;
+}
+
 static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
 {
         struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -423,39 +448,42 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
         twl4030_gpio_irq_base = irq_base;
 
 no_irqs:
-        twl_gpiochip.base = -1;
         twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
         twl_gpiochip.dev = &pdev->dev;
 
-        if (pdata) {
-                twl_gpiochip.base = pdata->gpio_base;
+        if (node)
+                pdata = of_gpio_twl4030(&pdev->dev);
 
-                /*
-                 * NOTE:  boards may waste power if they don't set pullups
-                 * and pulldowns correctly ... default for non-ULPI pins is
-                 * pulldown, and some other pins may have external pullups
-                 * or pulldowns.  Careful!
-                 */
-                ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
-                if (ret)
-                        dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
-                                        pdata->pullups, pdata->pulldowns,
-                                        ret);
-
-                ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
-                if (ret)
-                        dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
-                                        pdata->debounce, pdata->mmc_cd,
-                                        ret);
-
-                /*
-                 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
-                 * is (still) clear if use_leds is set.
-                 */
-                if (pdata->use_leds)
-                        twl_gpiochip.ngpio += 2;
+        if (pdata == NULL) {
+                dev_err(&pdev->dev, "Platform data is missing\n");
+                return -ENXIO;
         }
 
+        twl_gpiochip.base = pdata->gpio_base;
+
+        /*
+         * NOTE:  boards may waste power if they don't set pullups
+         * and pulldowns correctly ... default for non-ULPI pins is
+         * pulldown, and some other pins may have external pullups
+         * or pulldowns.  Careful!
+         */
+        ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+        if (ret)
+                dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+                        pdata->pullups, pdata->pulldowns, ret);
+
+        ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+        if (ret)
+                dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+                        pdata->debounce, pdata->mmc_cd, ret);
+
+        /*
+         * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+         * is (still) clear if use_leds is set.
+         */
+        if (pdata->use_leds)
+                twl_gpiochip.ngpio += 2;
+
         ret = gpiochip_add(&twl_gpiochip);
         if (ret < 0) {
                 dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);