3 files changed, 36 insertions, 36 deletions

diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 5f52883e64d2..4e03a87f3fb4 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -69,7 +69,6 @@
 #include <asm/pmac_feature.h>
 #include <asm/dbdma.h>
 #include <asm/macio.h>
-#include <asm/semaphore.h>
 
 #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -1593,7 +1592,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
         state = pmz_uart_reg.state + uap->port.line;
 
         mutex_lock(&pmz_irq_mutex);
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         spin_lock_irqsave(&uap->port.lock, flags);
 
@@ -1624,7 +1623,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
         /* Shut the chip down */
         pmz_set_scc_power(uap, 0);
 
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
         mutex_unlock(&pmz_irq_mutex);
 
         pmz_debug("suspend, switching complete\n");
@@ -1653,7 +1652,7 @@ static int pmz_resume(struct macio_dev *mdev)
         state = pmz_uart_reg.state + uap->port.line;
 
         mutex_lock(&pmz_irq_mutex);
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         spin_lock_irqsave(&uap->port.lock, flags);
         if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
@@ -1685,7 +1684,7 @@ static int pmz_resume(struct macio_dev *mdev)
         }
 
  bail:
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
         mutex_unlock(&pmz_irq_mutex);
 
         /* Right now, we deal with delay by blocking here, I'll be
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 2ca620900bcc..943770470b9d 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -638,7 +638,7 @@ static int uart_set_info(struct uart_state *state,
          * module insertion/removal doesn't change anything
          * under us.
          */
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         change_irq  = new_serial.irq != port->irq;
 
@@ -797,7 +797,7 @@ static int uart_set_info(struct uart_state *state,
         } else
                 retval = uart_startup(state, 1);
  exit:
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
         return retval;
 }
 
@@ -834,7 +834,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
         struct uart_port *port = state->port;
         int result = -EIO;
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
         if ((!file || !tty_hung_up_p(file)) &&
             !(tty->flags & (1 << TTY_IO_ERROR))) {
                 result = port->mctrl;
@@ -843,7 +843,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
                 result |= port->ops->get_mctrl(port);
                 spin_unlock_irq(&port->lock);
         }
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 
         return result;
 }
@@ -856,13 +856,13 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
         struct uart_port *port = state->port;
         int ret = -EIO;
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
         if ((!file || !tty_hung_up_p(file)) &&
             !(tty->flags & (1 << TTY_IO_ERROR))) {
                 uart_update_mctrl(port, set, clear);
                 ret = 0;
         }
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
         return ret;
 }
 
@@ -873,12 +873,12 @@ static void uart_break_ctl(struct tty_struct *tty, int break_state)
 
         BUG_ON(!kernel_locked());
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         if (port->type != PORT_UNKNOWN)
                 port->ops->break_ctl(port, break_state);
 
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 }
 
 static int uart_do_autoconfig(struct uart_state *state)
@@ -894,7 +894,7 @@ static int uart_do_autoconfig(struct uart_state *state)
          * changing, and hence any extra opens of the port while
          * we're auto-configuring.
          */
-        if (down_interruptible(&state->sem))
+        if (mutex_lock_interruptible(&state->mutex))
                 return -ERESTARTSYS;
 
         ret = -EBUSY;
@@ -920,7 +920,7 @@ static int uart_do_autoconfig(struct uart_state *state)
 
                 ret = uart_startup(state, 1);
         }
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
         return ret;
 }
 
@@ -1074,7 +1074,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
         if (ret != -ENOIOCTLCMD)
                 goto out;
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         if (tty_hung_up_p(filp)) {
                 ret = -EIO;
@@ -1098,7 +1098,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
         }
         }
  out_up:
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
  out:
         return ret;
 }
@@ -1186,7 +1186,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 
         DPRINTK("uart_close(%d) called\n", port->line);
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         if (tty_hung_up_p(filp))
                 goto done;
@@ -1260,7 +1260,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
         wake_up_interruptible(&state->info->open_wait);
 
  done:
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 }
 
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
@@ -1334,7 +1334,7 @@ static void uart_hangup(struct tty_struct *tty)
         BUG_ON(!kernel_locked());
         DPRINTK("uart_hangup(%d)\n", state->port->line);
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
         if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) {
                 uart_flush_buffer(tty);
                 uart_shutdown(state);
@@ -1344,7 +1344,7 @@ static void uart_hangup(struct tty_struct *tty)
                 wake_up_interruptible(&state->info->open_wait);
                 wake_up_interruptible(&state->info->delta_msr_wait);
         }
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 }
 
 /*
@@ -1447,9 +1447,9 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
                 if (mctrl & TIOCM_CAR)
                         break;
 
-                up(&state->sem);
+                mutex_unlock(&state->mutex);
                 schedule();
-                down(&state->sem);
+                mutex_lock(&state->mutex);
 
                 if (signal_pending(current))
                         break;
@@ -1475,7 +1475,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 
         mutex_lock(&port_mutex);
         state = drv->state + line;
-        if (down_interruptible(&state->sem)) {
+        if (mutex_lock_interruptible(&state->mutex)) {
                 state = ERR_PTR(-ERESTARTSYS);
                 goto out;
         }
@@ -1483,7 +1483,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
         state->count++;
         if (!state->port) {
                 state->count--;
-                up(&state->sem);
+                mutex_unlock(&state->mutex);
                 state = ERR_PTR(-ENXIO);
                 goto out;
         }
@@ -1504,7 +1504,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
                                      (unsigned long)state);
                 } else {
                         state->count--;
-                        up(&state->sem);
+                        mutex_unlock(&state->mutex);
                         state = ERR_PTR(-ENOMEM);
                 }
         }
@@ -1571,7 +1571,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
         if (tty_hung_up_p(filp)) {
                 retval = -EAGAIN;
                 state->count--;
-                up(&state->sem);
+                mutex_unlock(&state->mutex);
                 goto fail;
         }
 
@@ -1591,7 +1591,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
          */
         if (retval == 0)
                 retval = uart_block_til_ready(filp, state);
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 
         /*
          * If this is the first open to succeed, adjust things to suit.
@@ -1867,7 +1867,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 {
         struct uart_state *state = drv->state + port->line;
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         if (state->info && state->info->flags & UIF_INITIALIZED) {
                 struct uart_ops *ops = port->ops;
@@ -1896,7 +1896,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 
         uart_change_pm(state, 3);
 
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 
         return 0;
 }
@@ -1905,7 +1905,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 {
         struct uart_state *state = drv->state + port->line;
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         uart_change_pm(state, 0);
 
@@ -1954,7 +1954,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
                 }
         }
 
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 
         return 0;
 }
@@ -2049,7 +2049,7 @@ uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
         if (info && info->tty)
                 tty_vhangup(info->tty);
 
-        down(&state->sem);
+        mutex_lock(&state->mutex);
 
         state->info = NULL;
 
@@ -2072,7 +2072,7 @@ uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
                 kfree(info);
         }
 
-        up(&state->sem);
+        mutex_unlock(&state->mutex);
 }
 
 static struct tty_operations uart_ops = {
@@ -2161,7 +2161,7 @@ int uart_register_driver(struct uart_driver *drv)
                 state->close_delay     = 500;   /* .5 seconds */
                 state->closing_wait    = 30000; /* 30 seconds */
 
-                init_MUTEX(&state->sem);
+                mutex_init(&state->mutex);
         }
 
         retval = tty_register_driver(normal);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index a8187c3c8a7b..ec351005bf9d 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -136,6 +136,7 @@
 #include <linux/spinlock.h>
 #include <linux/sched.h>
 #include <linux/tty.h>
+#include <linux/mutex.h>
 
 struct uart_port;
 struct uart_info;
@@ -284,7 +285,7 @@ struct uart_state {
         struct uart_info        *info;
         struct uart_port        *port;
 
-        struct semaphore        sem;
+        struct mutex            mutex;
 };
 
 #define UART_XMIT_SIZE  PAGE_SIZE