6 files changed, 171 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
new file mode 100644
index 000000000000..558cdf3c9abc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@@ -0,0 +1,22 @@
+GPIO line that should be set high/low to power off a device
+
+Required properties:
+- compatible : should be "gpio-poweroff".
+- gpios : The GPIO to set high/low, see "gpios property" in
+  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
+  low to power down the board set it to "Active Low", otherwise set
+  gpio to "Active High".
+
+Optional properties:
+- input : Initially configure the GPIO line as an input. Only reconfigure
+  it to an output when the pm_power_off function is called. If this optional
+  property is not specified, the GPIO is initialized as an output in its
+  inactive state.
+
+
+Examples:
+
+gpio-poweroff {
+        compatible = "gpio-poweroff";
+        gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+};
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 49a893972318..b1d956d81f0c 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -335,6 +335,9 @@ config AB8500_BATTERY_THERM_ON_BATCTRL
         help
           Say Y to enable battery temperature measurements using
           thermistor connected on BATCTRL ADC.
+
+source "drivers/power/reset/Kconfig"
+
 endif # POWER_SUPPLY
 
 source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b949cf85590c..f1d99f4a0bc3 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -49,3 +49,4 @@ obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)   += max8998_charger.o
 obj-$(CONFIG_POWER_AVS)         += avs/
 obj-$(CONFIG_CHARGER_SMB347)    += smb347-charger.o
+obj-$(CONFIG_POWER_RESET)       += reset/
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
new file mode 100644
index 000000000000..6461b489fb09
--- /dev/null
+++ b/drivers/power/reset/Kconfig
@@ -0,0 +1,15 @@
+menuconfig POWER_RESET
+        bool "Board level reset or power off"
+        help
+          Provides a number of drivers which either reset a complete board
+          or shut it down, by manipulating the main power supply on the board.
+
+          Say Y here to enable board reset and power off
+
+config POWER_RESET_GPIO
+        bool "GPIO power-off driver"
+        depends on OF_GPIO && POWER_RESET
+        help
+          This driver supports turning off your board via a GPIO line.
+          If your board needs a GPIO high/low to power down, say Y and
+          create a binding in your devicetree.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
new file mode 100644
index 000000000000..751488a4a0c5
--- /dev/null
+++ b/drivers/power/reset/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
new file mode 100644
index 000000000000..0491e5335d02
--- /dev/null
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -0,0 +1,129 @@
+/*
+ * Toggles a GPIO pin to power down a device
+ *
+ * Jamie Lentin <jm@lentin.co.uk>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Jamie Lentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+
+/*
+ * Hold configuration here, cannot be more than one instance of the driver
+ * since pm_power_off itself is global.
+ */
+static int gpio_num = -1;
+static int gpio_active_low;
+
+static void gpio_poweroff_do_poweroff(void)
+{
+        BUG_ON(gpio_num == -1);
+
+        /* drive it active */
+        gpio_direction_output(gpio_num, !gpio_active_low);
+        mdelay(100);
+        /* rising edge or drive inactive */
+        gpio_set_value(gpio_num, gpio_active_low);
+        mdelay(100);
+        /* falling edge */
+        gpio_set_value(gpio_num, !gpio_active_low);
+
+        /* give it some time */
+        mdelay(3000);
+
+        WARN_ON(1);
+}
+
+static int __devinit gpio_poweroff_probe(struct platform_device *pdev)
+{
+        enum of_gpio_flags flags;
+        bool input = false;
+        int ret;
+
+        /* If a pm_power_off function has already been added, leave it alone */
+        if (pm_power_off != NULL) {
+                pr_err("%s: pm_power_off function already registered",
+                       __func__);
+                return -EBUSY;
+        }
+
+        gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
+        if (gpio_num < 0) {
+                pr_err("%s: Could not get GPIO configuration: %d",
+                       __func__, gpio_num);
+                return -ENODEV;
+        }
+        gpio_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+        if (of_get_property(pdev->dev.of_node, "input", NULL))
+                input = true;
+
+        ret = gpio_request(gpio_num, "poweroff-gpio");
+        if (ret) {
+                pr_err("%s: Could not get GPIO %d", __func__, gpio_num);
+                return ret;
+        }
+        if (input) {
+                if (gpio_direction_input(gpio_num)) {
+                        pr_err("Could not set direction of GPIO %d to input",
+                               gpio_num);
+                        goto err;
+                }
+        } else {
+                if (gpio_direction_output(gpio_num, gpio_active_low)) {
+                        pr_err("Could not set direction of GPIO %d", gpio_num);
+                        goto err;
+                }
+        }
+
+        pm_power_off = &gpio_poweroff_do_poweroff;
+        return 0;
+
+err:
+        gpio_free(gpio_num);
+        return -ENODEV;
+}
+
+static int __devexit gpio_poweroff_remove(struct platform_device *pdev)
+{
+        if (gpio_num != -1)
+                gpio_free(gpio_num);
+        if (pm_power_off == &gpio_poweroff_do_poweroff)
+                pm_power_off = NULL;
+
+        return 0;
+}
+
+static const struct of_device_id of_gpio_poweroff_match[] = {
+        { .compatible = "gpio-poweroff", },
+        {},
+};
+
+static struct platform_driver gpio_poweroff_driver = {
+        .probe = gpio_poweroff_probe,
+        .remove = __devexit_p(gpio_poweroff_remove),
+        .driver = {
+                   .name = "poweroff-gpio",
+                   .owner = THIS_MODULE,
+                   .of_match_table = of_gpio_poweroff_match,
+                   },
+};
+
+module_platform_driver(gpio_poweroff_driver);
+
+MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>");
+MODULE_DESCRIPTION("GPIO poweroff driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:poweroff-gpio");