diff options
-rw-r--r-- | arch/powerpc/boot/dts/acadia.dts | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts new file mode 100644 index 000000000000..57291f61ffe7 --- /dev/null +++ b/arch/powerpc/boot/dts/acadia.dts | |||
@@ -0,0 +1,224 @@ | |||
1 | /* | ||
2 | * Device Tree Source for AMCC Acadia (405EZ) | ||
3 | * | ||
4 | * Copyright IBM Corp. 2008 | ||
5 | * | ||
6 | * This file is licensed under the terms of the GNU General Public License | ||
7 | * version 2. This program is licensed "as is" without any warranty of any | ||
8 | * kind, whether express or implied. | ||
9 | */ | ||
10 | |||
11 | /dts-v1/; | ||
12 | |||
13 | / { | ||
14 | #address-cells = <1>; | ||
15 | #size-cells = <1>; | ||
16 | model = "amcc,acadia"; | ||
17 | compatible = "amcc,acadia"; | ||
18 | dcr-parent = <&{/cpus/cpu@0}>; | ||
19 | |||
20 | aliases { | ||
21 | ethernet0 = &EMAC0; | ||
22 | serial0 = &UART0; | ||
23 | serial1 = &UART1; | ||
24 | }; | ||
25 | |||
26 | cpus { | ||
27 | #address-cells = <1>; | ||
28 | #size-cells = <0>; | ||
29 | |||
30 | cpu@0 { | ||
31 | device_type = "cpu"; | ||
32 | model = "PowerPC,405EZ"; | ||
33 | reg = <0x0>; | ||
34 | clock-frequency = <0>; /* Filled in by wrapper */ | ||
35 | timebase-frequency = <0>; /* Filled in by wrapper */ | ||
36 | i-cache-line-size = <32>; | ||
37 | d-cache-line-size = <32>; | ||
38 | i-cache-size = <16384>; | ||
39 | d-cache-size = <16384>; | ||
40 | dcr-controller; | ||
41 | dcr-access-method = "native"; | ||
42 | }; | ||
43 | }; | ||
44 | |||
45 | memory { | ||
46 | device_type = "memory"; | ||
47 | reg = <0x0 0x0>; /* Filled in by wrapper */ | ||
48 | }; | ||
49 | |||
50 | UIC0: interrupt-controller { | ||
51 | compatible = "ibm,uic-405ez", "ibm,uic"; | ||
52 | interrupt-controller; | ||
53 | dcr-reg = <0x0c0 0x009>; | ||
54 | cell-index = <0>; | ||
55 | #address-cells = <0>; | ||
56 | #size-cells = <0>; | ||
57 | #interrupt-cells = <2>; | ||
58 | }; | ||
59 | |||
60 | plb { | ||
61 | compatible = "ibm,plb-405ez", "ibm,plb3"; | ||
62 | #address-cells = <1>; | ||
63 | #size-cells = <1>; | ||
64 | ranges; | ||
65 | clock-frequency = <0>; /* Filled in by wrapper */ | ||
66 | |||
67 | MAL0: mcmal { | ||
68 | compatible = "ibm,mcmal-405ez", "ibm,mcmal"; | ||
69 | dcr-reg = <0x380 0x62>; | ||
70 | num-tx-chans = <1>; | ||
71 | num-rx-chans = <1>; | ||
72 | interrupt-parent = <&UIC0>; | ||
73 | /* 405EZ has only 3 interrupts to the UIC, as | ||
74 | * SERR, TXDE, and RXDE are or'd together into | ||
75 | * one UIC bit | ||
76 | */ | ||
77 | interrupts = < | ||
78 | 0x13 0x4 /* TXEOB */ | ||
79 | 0x15 0x4 /* RXEOB */ | ||
80 | 0x12 0x4 /* SERR, TXDE, RXDE */>; | ||
81 | }; | ||
82 | |||
83 | POB0: opb { | ||
84 | compatible = "ibm,opb-405ez", "ibm,opb"; | ||
85 | #address-cells = <1>; | ||
86 | #size-cells = <1>; | ||
87 | ranges; | ||
88 | dcr-reg = <0x0a 0x05>; | ||
89 | clock-frequency = <0>; /* Filled in by wrapper */ | ||
90 | |||
91 | UART0: serial@ef600300 { | ||
92 | device_type = "serial"; | ||
93 | compatible = "ns16550"; | ||
94 | reg = <0xef600300 0x8>; | ||
95 | virtual-reg = <0xef600300>; | ||
96 | clock-frequency = <0>; /* Filled in by wrapper */ | ||
97 | current-speed = <115200>; | ||
98 | interrupt-parent = <&UIC0>; | ||
99 | interrupts = <0x5 0x4>; | ||
100 | }; | ||
101 | |||
102 | UART1: serial@ef600400 { | ||
103 | device_type = "serial"; | ||
104 | compatible = "ns16550"; | ||
105 | reg = <0xef600400 0x8>; | ||
106 | clock-frequency = <0>; /* Filled in by wrapper */ | ||
107 | current-speed = <115200>; | ||
108 | interrupt-parent = <&UIC0>; | ||
109 | interrupts = <0x6 0x4>; | ||
110 | }; | ||
111 | |||
112 | IIC: i2c@ef600500 { | ||
113 | compatible = "ibm,iic-405ez", "ibm,iic"; | ||
114 | reg = <0xef600500 0x11>; | ||
115 | interrupt-parent = <&UIC0>; | ||
116 | interrupts = <0xa 0x4>; | ||
117 | }; | ||
118 | |||
119 | GPIO0: gpio@ef600700 { | ||
120 | compatible = "ibm,gpio-405ez"; | ||
121 | reg = <0xef600700 0x20>; | ||
122 | }; | ||
123 | |||
124 | GPIO1: gpio@ef600800 { | ||
125 | compatible = "ibm,gpio-405ez"; | ||
126 | reg = <0xef600800 0x20>; | ||
127 | }; | ||
128 | |||
129 | EMAC0: ethernet@ef600900 { | ||
130 | device_type = "network"; | ||
131 | compatible = "ibm,emac-405ez", "ibm,emac"; | ||
132 | interrupt-parent = <&UIC0>; | ||
133 | interrupts = < | ||
134 | 0x10 0x4 /* Ethernet */ | ||
135 | 0x11 0x4 /* Ethernet Wake up */>; | ||
136 | local-mac-address = [000000000000]; /* Filled in by wrapper */ | ||
137 | reg = <0xef600900 0x70>; | ||
138 | mal-device = <&MAL0>; | ||
139 | mal-tx-channel = <0>; | ||
140 | mal-rx-channel = <0>; | ||
141 | cell-index = <0>; | ||
142 | max-frame-size = <1500>; | ||
143 | rx-fifo-size = <4096>; | ||
144 | tx-fifo-size = <2048>; | ||
145 | phy-mode = "mii"; | ||
146 | phy-map = <0x0>; | ||
147 | }; | ||
148 | |||
149 | CAN0: can@ef601000 { | ||
150 | compatible = "amcc,can-405ez"; | ||
151 | reg = <0xef601000 0x620>; | ||
152 | interrupt-parent = <&UIC0>; | ||
153 | interrupts = <0x7 0x4>; | ||
154 | }; | ||
155 | |||
156 | CAN1: can@ef601800 { | ||
157 | compatible = "amcc,can-405ez"; | ||
158 | reg = <0xef601800 0x620>; | ||
159 | interrupt-parent = <&UIC0>; | ||
160 | interrupts = <0x8 0x4>; | ||
161 | }; | ||
162 | |||
163 | cameleon@ef602000 { | ||
164 | compatible = "amcc,cameleon-405ez"; | ||
165 | reg = <0xef602000 0x800>; | ||
166 | interrupt-parent = <&UIC0>; | ||
167 | interrupts = <0xb 0x4 0xc 0x4>; | ||
168 | }; | ||
169 | |||
170 | ieee1588@ef602800 { | ||
171 | compatible = "amcc,ieee1588-405ez"; | ||
172 | reg = <0xef602800 0x60>; | ||
173 | interrupt-parent = <&UIC0>; | ||
174 | interrupts = <0x4 0x4>; | ||
175 | /* This thing is a bit weird. It has it's own UIC | ||
176 | * that it uses to generate snapshot triggers. We | ||
177 | * don't really support this device yet, and it needs | ||
178 | * work to figure this out. | ||
179 | */ | ||
180 | dcr-reg = <0xe0 0x9>; | ||
181 | }; | ||
182 | |||
183 | usb@ef603000 { | ||
184 | compatible = "ohci-be"; | ||
185 | reg = <0xef603000 0x80>; | ||
186 | interrupts-parent = <&UIC0>; | ||
187 | interrupts = <0xd 0x4 0xe 0x4>; | ||
188 | }; | ||
189 | |||
190 | dac@ef603300 { | ||
191 | compatible = "amcc,dac-405ez"; | ||
192 | reg = <0xef603300 0x40>; | ||
193 | interrupt-parent = <&UIC0>; | ||
194 | interrupts = <0x18 0x4>; | ||
195 | }; | ||
196 | |||
197 | adc@ef603400 { | ||
198 | compatible = "amcc,adc-405ez"; | ||
199 | reg = <0xef603400 0x40>; | ||
200 | interrupt-parent = <&UIC0>; | ||
201 | interrupts = <0x17 0x4>; | ||
202 | }; | ||
203 | |||
204 | spi@ef603500 { | ||
205 | compatible = "amcc,spi-405ez"; | ||
206 | reg = <0xef603500 0x100>; | ||
207 | interrupt-parent = <&UIC0>; | ||
208 | interrupts = <0x9 0x4>; | ||
209 | }; | ||
210 | }; | ||
211 | |||
212 | EBC0: ebc { | ||
213 | compatible = "ibm,ebc-405ez", "ibm,ebc"; | ||
214 | dcr-reg = <0x12 0x2>; | ||
215 | #address-cells = <2>; | ||
216 | #size-cells = <1>; | ||
217 | clock-frequency = <0>; /* Filled in by wrapper */ | ||
218 | }; | ||
219 | }; | ||
220 | |||
221 | chosen { | ||
222 | linux,stdout-path = "/plb/opb/serial@ef600300"; | ||
223 | }; | ||
224 | }; | ||