1 files changed, 20 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index df5a425a49d1..d7cb9680b4fa 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -42,6 +42,7 @@
 #define ETH_KS8851_IRQ                  34
 #define ETH_KS8851_POWER_ON             48
 #define ETH_KS8851_QUART                138
+#define OMAP4SDP_MDM_PWR_EN_GPIO        157
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO        184
 #define OMAP4_SFH7741_ENABLE_GPIO               188
 
@@ -225,6 +226,16 @@ static void __init omap_4430sdp_init_irq(void)
         omap_gpio_init();
 }
 
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+        .port_mode[0]   = EHCI_HCD_OMAP_MODE_PHY,
+        .port_mode[1]   = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[2]   = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .phy_reset      = false,
+        .reset_gpio_port[0]  = -EINVAL,
+        .reset_gpio_port[1]  = -EINVAL,
+        .reset_gpio_port[2]  = -EINVAL,
+};
+
 static struct omap_musb_board_data musb_board_data = {
         .interface_type         = MUSB_INTERFACE_UTMI,
         .mode                   = MUSB_PERIPHERAL,
@@ -514,6 +525,15 @@ static void __init omap_4430sdp_init(void)
         platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
         omap_serial_init();
         omap4_twl6030_hsmmc_init(mmc);
+
+        /* Power on the ULPI PHY */
+        if (gpio_is_valid(OMAP4SDP_MDM_PWR_EN_GPIO)) {
+                /* FIXME: Assumes pad is already muxed for GPIO mode */
+                gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3");
+                gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
+        }
+        usb_ehci_init(&ehci_pdata);
+
         /* OMAP4 SDP uses internal transceiver so register nop transceiver */
         usb_nop_xceiv_register();
         /* FIXME: allow multi-omap to boot until musb is updated for omap4 */