148 files changed, 2828 insertions, 953 deletions

diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt
new file mode 100644
index 000000000000..dca274ff4005
--- /dev/null
+++ b/Documentation/device-mapper/snapshot.txt
@@ -0,0 +1,73 @@
+Device-mapper snapshot support
+==============================
+
+Device-mapper allows you, without massive data copying:
+
+*) To create snapshots of any block device i.e. mountable, saved states of
+the block device which are also writable without interfering with the
+original content;
+*) To create device "forks", i.e. multiple different versions of the
+same data stream.
+
+
+In both cases, dm copies only the chunks of data that get changed and
+uses a separate copy-on-write (COW) block device for storage.
+
+
+There are two dm targets available: snapshot and snapshot-origin.
+
+*) snapshot-origin <origin>
+
+which will normally have one or more snapshots based on it.
+You must create the snapshot-origin device before you can create snapshots.
+Reads will be mapped directly to the backing device. For each write, the
+original data will be saved in the <COW device> of each snapshot to keep
+its visible content unchanged, at least until the <COW device> fills up.
+
+
+*) snapshot <origin> <COW device> <persistent?> <chunksize>
+
+A snapshot is created of the <origin> block device. Changed chunks of
+<chunksize> sectors will be stored on the <COW device>.  Writes will
+only go to the <COW device>.  Reads will come from the <COW device> or
+from <origin> for unchanged data.  <COW device> will often be
+smaller than the origin and if it fills up the snapshot will become
+useless and be disabled, returning errors.  So it is important to monitor
+the amount of free space and expand the <COW device> before it fills up.
+
+<persistent?> is P (Persistent) or N (Not persistent - will not survive
+after reboot).
+
+
+How this is used by LVM2
+========================
+When you create the first LVM2 snapshot of a volume, four dm devices are used:
+
+1) a device containing the original mapping table of the source volume;
+2) a device used as the <COW device>;
+3) a "snapshot" device, combining #1 and #2, which is the visible snapshot
+   volume;
+4) the "original" volume (which uses the device number used by the original
+   source volume), whose table is replaced by a "snapshot-origin" mapping
+   from device #1.
+
+A fixed naming scheme is used, so with the following commands:
+
+lvcreate -L 1G -n base volumeGroup
+lvcreate -L 100M --snapshot -n snap volumeGroup/base
+
+we'll have this situation (with volumes in above order):
+
+# dmsetup table|grep volumeGroup
+
+volumeGroup-base-real: 0 2097152 linear 8:19 384
+volumeGroup-snap-cow: 0 204800 linear 8:19 2097536
+volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16
+volumeGroup-base: 0 2097152 snapshot-origin 254:11
+
+# ls -lL /dev/mapper/volumeGroup-*
+brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+brw-------  1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
+brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
+brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
+
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 5df44dc894e5..1829009db771 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -51,9 +51,9 @@ or you don't get any checking at all.
 Where to get sparse
 ~~~~~~~~~~~~~~~~~~~
 
-With BK, you can just get it from
+With git, you can just get it from
 
-        bk://sparse.bkbits.net/sparse
+        rsync://rsync.kernel.org/pub/scm/devel/sparse/sparse.git
 
 and DaveJ has tar-balls at
 
diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt
index d59b95cc6f1b..a49e5f2c2b46 100644
--- a/Documentation/usb/URB.txt
+++ b/Documentation/usb/URB.txt
@@ -1,5 +1,6 @@
 Revised: 2000-Dec-05.
 Again:   2002-Jul-06
+Again:   2005-Sep-19
 
     NOTE:
 
@@ -18,8 +19,8 @@ called USB Request Block, or URB for short.
   and deliver the data and status back. 
 
 - Execution of an URB is inherently an asynchronous operation, i.e. the 
-  usb_submit_urb(urb) call returns immediately after it has successfully queued 
-  the requested action. 
+  usb_submit_urb(urb) call returns immediately after it has successfully
+  queued the requested action.
 
 - Transfers for one URB can be canceled with usb_unlink_urb(urb) at any time. 
 
@@ -94,8 +95,9 @@ To free an URB, use
 
         void usb_free_urb(struct urb *urb)
 
-You may not free an urb that you've submitted, but which hasn't yet been
-returned to you in a completion callback.
+You may free an urb that you've submitted, but which hasn't yet been
+returned to you in a completion callback.  It will automatically be
+deallocated when it is no longer in use.
 
 
 1.4. What has to be filled in?
@@ -145,30 +147,36 @@ to get seamless ISO streaming.
 
 1.6. How to cancel an already running URB?
 
-For an URB which you've submitted, but which hasn't been returned to
-your driver by the host controller, call
+There are two ways to cancel an URB you've submitted but which hasn't
+been returned to your driver yet.  For an asynchronous cancel, call
 
         int usb_unlink_urb(struct urb *urb)
 
 It removes the urb from the internal list and frees all allocated
-HW descriptors. The status is changed to reflect unlinking. After 
-usb_unlink_urb() returns with that status code, you can free the URB
-with usb_free_urb().
+HW descriptors. The status is changed to reflect unlinking.  Note
+that the URB will not normally have finished when usb_unlink_urb()
+returns; you must still wait for the completion handler to be called.
 
-There is also an asynchronous unlink mode.  To use this, set the
-the URB_ASYNC_UNLINK flag in urb->transfer flags before calling
-usb_unlink_urb().  When using async unlinking, the URB will not
-normally be unlinked when usb_unlink_urb() returns.  Instead, wait
-for the completion handler to be called.
+To cancel an URB synchronously, call
+
+        void usb_kill_urb(struct urb *urb)
+
+It does everything usb_unlink_urb does, and in addition it waits
+until after the URB has been returned and the completion handler
+has finished.  It also marks the URB as temporarily unusable, so
+that if the completion handler or anyone else tries to resubmit it
+they will get a -EPERM error.  Thus you can be sure that when
+usb_kill_urb() returns, the URB is totally idle.
 
 
 1.7. What about the completion handler?
 
 The handler is of the following type:
 
-        typedef void (*usb_complete_t)(struct urb *);
+        typedef void (*usb_complete_t)(struct urb *, struct pt_regs *)
 
-i.e. it gets just the URB that caused the completion call.
+I.e., it gets the URB that caused the completion call, plus the
+register values at the time of the corresponding interrupt (if any).
 In the completion handler, you should have a look at urb->status to
 detect any USB errors. Since the context parameter is included in the URB,
 you can pass information to the completion handler. 
@@ -176,17 +184,11 @@ you can pass information to the completion handler.
 Note that even when an error (or unlink) is reported, data may have been
 transferred.  That's because USB transfers are packetized; it might take
 sixteen packets to transfer your 1KByte buffer, and ten of them might
-have transferred succesfully before the completion is called.
+have transferred succesfully before the completion was called.
 
 
 NOTE:  ***** WARNING *****
-Don't use urb->dev field in your completion handler; it's cleared
-as part of giving urbs back to drivers.  (Addressing an issue with
-ownership of periodic URBs, which was otherwise ambiguous.) Instead,
-use urb->context to hold all the data your driver needs.
-
-NOTE:  ***** WARNING *****
-Also, NEVER SLEEP IN A COMPLETION HANDLER.  These are normally called
+NEVER SLEEP IN A COMPLETION HANDLER.  These are normally called
 during hardware interrupt processing.  If you can, defer substantial
 work to a tasklet (bottom half) to keep system latencies low.  You'll
 probably need to use spinlocks to protect data structures you manipulate
@@ -229,24 +231,10 @@ ISO data with some other event stream.
 Interrupt transfers, like isochronous transfers, are periodic, and happen
 in intervals that are powers of two (1, 2, 4 etc) units.  Units are frames
 for full and low speed devices, and microframes for high speed ones.
-
-Currently, after you submit one interrupt URB, that urb is owned by the
-host controller driver until you cancel it with usb_unlink_urb().  You
-may unlink interrupt urbs in their completion handlers, if you need to.
-
-After a transfer completion is called, the URB is automagically resubmitted.
-THIS BEHAVIOR IS EXPECTED TO BE REMOVED!!
-
-Interrupt transfers may only send (or receive) the "maxpacket" value for
-the given interrupt endpoint; if you need more data, you will need to
-copy that data out of (or into) another buffer.  Similarly, you can't
-queue interrupt transfers.
-THESE RESTRICTIONS ARE EXPECTED TO BE REMOVED!!
-
-Note that this automagic resubmission model does make it awkward to use
-interrupt OUT transfers.  The portable solution involves unlinking those
-OUT urbs after the data is transferred, and perhaps submitting a final
-URB for a short packet.
-
 The usb_submit_urb() call modifies urb->interval to the implemented interval
 value that is less than or equal to the requested interval value.
+
+In Linux 2.6, unlike earlier versions, interrupt URBs are not automagically
+restarted when they complete.  They end when the completion handler is
+called, just like other URBs.  If you want an interrupt URB to be restarted,
+your completion handler must resubmit it.
diff --git a/MAINTAINERS b/MAINTAINERS
index ade7415d2467..7d1dd5bad39a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1063,8 +1063,6 @@ M:	wli@holomorphy.com
 S:      Maintained
 
 I2C SUBSYSTEM
-P:      Greg Kroah-Hartman
-M:      greg@kroah.com
 P:      Jean Delvare
 M:      khali@linux-fr.org
 L:      lm-sensors@lm-sensors.org
@@ -1404,6 +1402,18 @@ L:	linux-kernel@vger.kernel.org
 L:      fastboot@osdl.org
 S:      Maintained
 
+KPROBES
+P:      Prasanna S Panchamukhi
+M:      prasanna@in.ibm.com
+P:      Ananth N Mavinakayanahalli
+M:      ananth@in.ibm.com
+P:      Anil S Keshavamurthy
+M:      anil.s.keshavamurthy@intel.com
+P:      David S. Miller
+M:      davem@davemloft.net
+L:      linux-kernel@vger.kernel.org
+S:      Maintained
+
 LANMEDIA WAN CARD DRIVER
 P:      Andrew Stanley-Jones
 M:      asj@lanmedia.com
diff --git a/README b/README
index 2b5844d8cfa0..d1edcc7adabe 100644
--- a/README
+++ b/README
@@ -151,7 +151,7 @@ CONFIGURING the kernel:
                            your existing ./.config file.
         "make silentoldconfig"
                            Like above, but avoids cluttering the screen
-                           with question already answered.
+                           with questions already answered.
    
         NOTES on "make config":
         - having unnecessary drivers will make the kernel bigger, and can
@@ -199,9 +199,9 @@ COMPILING the kernel:
    are installing a new kernel with the same version number as your
    working kernel, make a backup of your modules directory before you
    do a "make modules_install".
-   In alternative, before compiling, edit your Makefile and change the
-   "EXTRAVERSION" line - its content is appended to the regular kernel
-   version.
+   Alternatively, before compiling, use the kernel config option
+   "LOCALVERSION" to append a unique suffix to the regular kernel version.
+   LOCALVERSION can be set in the "General Setup" menu.
 
  - In order to boot your new kernel, you'll need to copy the kernel
    image (e.g. .../linux/arch/i386/boot/bzImage after compilation)
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index fa98dae3cd98..eb20c3afff58 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -127,6 +127,10 @@ common_shutdown_1(void *generic_ptr)
         /* If booted from SRM, reset some of the original environment. */
         if (alpha_using_srm) {
 #ifdef CONFIG_DUMMY_CONSOLE
+                /* If we've gotten here after SysRq-b, leave interrupt
+                   context before taking over the console. */
+                if (in_interrupt())
+                        irq_exit();
                 /* This has the effect of resetting the VGA video origin.  */
                 take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
 #endif
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7152bfbee581..93b5e8e5292e 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -537,7 +537,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_CPU_MPCORE
         clrex
 #else
-        strex   r3, r4, [ip]                    @ Clear exclusive monitor
+        strex   r5, r4, [ip]                    @ Clear exclusive monitor
 #endif
 #endif
 #if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
diff --git a/arch/arm/kernel/io.c b/arch/arm/kernel/io.c
index 6c20c1188b60..1f6822dfae74 100644
--- a/arch/arm/kernel/io.c
+++ b/arch/arm/kernel/io.c
@@ -7,7 +7,7 @@
  * Copy data from IO memory space to "real" memory space.
  * This needs to be optimized.
  */
-void _memcpy_fromio(void *to, void __iomem *from, size_t count)
+void _memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
 {
         unsigned char *t = to;
         while (count) {
@@ -22,7 +22,7 @@ void _memcpy_fromio(void *to, void __iomem *from, size_t count)
  * Copy data from "real" memory space to IO memory space.
  * This needs to be optimized.
  */
-void _memcpy_toio(void __iomem *to, const void *from, size_t count)
+void _memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
 {
         const unsigned char *f = from;
         while (count) {
@@ -37,7 +37,7 @@ void _memcpy_toio(void __iomem *to, const void *from, size_t count)
  * "memset" on IO memory space.
  * This needs to be optimized.
  */
-void _memset_io(void __iomem *dst, int c, size_t count)
+void _memset_io(volatile void __iomem *dst, int c, size_t count)
 {
         while (count) {
                 count--;
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 56405dbfd739..a18983a3c934 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -233,6 +233,23 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
                 simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512);
 }
 
+static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len)
+{
+
+        int scatterlen = sc->use_sg;
+        struct scatterlist *slp;
+
+        if (scatterlen == 0)
+                memcpy(sc->request_buffer, buf, len);
+        else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) {
+                unsigned thislen = min(len, slp->length);
+
+                memcpy(page_address(slp->page) + slp->offset, buf, thislen);
+                slp++;
+                len -= thislen;
+        }
+}
+
 static int
 simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
@@ -240,6 +257,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
         char fname[MAX_ROOT_LEN+16];
         size_t disk_size;
         char *buf;
+        char localbuf[36];
 #if DEBUG_SIMSCSI
         register long sp asm ("sp");
 
@@ -263,7 +281,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
                                 /* disk doesn't exist... */
                                 break;
                         }
-                        buf = sc->request_buffer;
+                        buf = localbuf;
                         buf[0] = 0;     /* magnetic disk */
                         buf[1] = 0;     /* not a removable medium */
                         buf[2] = 2;     /* SCSI-2 compliant device */
@@ -273,6 +291,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
                         buf[6] = 0;     /* reserved */
                         buf[7] = 0;     /* various flags */
                         memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28);
+                        simscsi_fillresult(sc, buf, 36);
                         sc->result = GOOD;
                         break;
 
@@ -304,16 +323,13 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
                         simscsi_readwrite10(sc, SSC_WRITE);
                         break;
 
-
                       case READ_CAPACITY:
                         if (desc[target_id] < 0 || sc->request_bufflen < 8) {
                                 break;
                         }
-                        buf = sc->request_buffer;
-
+                        buf = localbuf;
                         disk_size = simscsi_get_disk_size(desc[target_id]);
 
-                        /* pretend to be a 1GB disk (partition table contains real stuff): */
                         buf[0] = (disk_size >> 24) & 0xff;
                         buf[1] = (disk_size >> 16) & 0xff;
                         buf[2] = (disk_size >>  8) & 0xff;
@@ -323,13 +339,14 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
                         buf[5] = 0;
                         buf[6] = 2;
                         buf[7] = 0;
+                        simscsi_fillresult(sc, buf, 8);
                         sc->result = GOOD;
                         break;
 
                       case MODE_SENSE:
                       case MODE_SENSE_10:
                         /* sd.c uses this to determine whether disk does write-caching. */
-                        memset(sc->request_buffer, 0, 128);
+                        simscsi_fillresult(sc, (char *)empty_zero_page, sc->request_bufflen);
                         sc->result = GOOD;
                         break;
 
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 499a065f4e60..db32fc1d3935 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -489,24 +489,27 @@ ia64_state_save:
         ;;
         st8 [temp1]=r17,16      // pal_min_state
         st8 [temp2]=r6,16       // prev_IA64_KR_CURRENT
+        mov r6=IA64_KR(CURRENT_STACK)
+        ;;
+        st8 [temp1]=r6,16       // prev_IA64_KR_CURRENT_STACK
+        st8 [temp2]=r0,16       // prev_task, starts off as NULL
         mov r6=cr.ifa
         ;;
-        st8 [temp1]=r0,16       // prev_task, starts off as NULL
-        st8 [temp2]=r12,16      // cr.isr
+        st8 [temp1]=r12,16      // cr.isr
+        st8 [temp2]=r6,16       // cr.ifa
         mov r12=cr.itir
         ;;
-        st8 [temp1]=r6,16       // cr.ifa
-        st8 [temp2]=r12,16      // cr.itir
+        st8 [temp1]=r12,16      // cr.itir
+        st8 [temp2]=r11,16      // cr.iipa
         mov r12=cr.iim
         ;;
-        st8 [temp1]=r11,16      // cr.iipa
-        st8 [temp2]=r12,16      // cr.iim
-        mov r6=cr.iha
+        st8 [temp1]=r12,16      // cr.iim
 (p1)    mov r12=IA64_MCA_COLD_BOOT
 (p2)    mov r12=IA64_INIT_WARM_BOOT
+        mov r6=cr.iha
         ;;
-        st8 [temp1]=r6,16       // cr.iha
-        st8 [temp2]=r12         // os_status, default is cold boot
+        st8 [temp2]=r6,16       // cr.iha
+        st8 [temp1]=r12         // os_status, default is cold boot
         mov r6=IA64_MCA_SAME_CONTEXT
         ;;
         st8 [temp1]=r6          // context, default is same context
@@ -823,9 +826,12 @@ ia64_state_restore:
         ld8 r12=[temp1],16      // sal_ra
         ld8 r9=[temp2],16       // sal_gp
         ;;
-        ld8 r22=[temp1],24      // pal_min_state, virtual.  skip prev_task
+        ld8 r22=[temp1],16      // pal_min_state, virtual
         ld8 r21=[temp2],16      // prev_IA64_KR_CURRENT
         ;;
+        ld8 r16=[temp1],16      // prev_IA64_KR_CURRENT_STACK
+        ld8 r20=[temp2],16      // prev_task
+        ;;
         ld8 temp3=[temp1],16    // cr.isr
         ld8 temp4=[temp2],16    // cr.ifa
         ;;
@@ -846,6 +852,45 @@ ia64_state_restore:
         ld8 r8=[temp1]          // os_status
         ld8 r10=[temp2]         // context
 
+        /* Wire IA64_TR_CURRENT_STACK to the stack that we are resuming to.  To
+         * avoid any dependencies on the algorithm in ia64_switch_to(), just
+         * purge any existing CURRENT_STACK mapping and insert the new one.
+         *
+         * r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains
+         * prev_IA64_KR_CURRENT, these values may have been changed by the C
+         * code.  Do not use r8, r9, r10, r22, they contain values ready for
+         * the return to SAL.
+         */
+
+        mov r15=IA64_KR(CURRENT_STACK)          // physical granule mapped by IA64_TR_CURRENT_STACK
+        ;;
+        shl r15=r15,IA64_GRANULE_SHIFT
+        ;;
+        dep r15=-1,r15,61,3                     // virtual granule
+        mov r18=IA64_GRANULE_SHIFT<<2           // for cr.itir.ps
+        ;;
+        ptr.d r15,r18
+        ;;
+        srlz.d
+
+        extr.u r19=r21,61,3                     // r21 = prev_IA64_KR_CURRENT
+        shl r20=r16,IA64_GRANULE_SHIFT          // r16 = prev_IA64_KR_CURRENT_STACK
+        movl r21=PAGE_KERNEL                    // page properties
+        ;;
+        mov IA64_KR(CURRENT_STACK)=r16
+        cmp.ne p6,p0=RGN_KERNEL,r19             // new stack is in the kernel region?
+        or r21=r20,r21                          // construct PA | page properties
+(p6)    br.spnt 1f                              // the dreaded cpu 0 idle task in region 5:(
+        ;;
+        mov cr.itir=r18
+        mov cr.ifa=r21
+        mov r20=IA64_TR_CURRENT_STACK
+        ;;
+        itr.d dtr[r20]=r21
+        ;;
+        srlz.d
+1:
+
         br.sptk b0
 
 //EndStub//////////////////////////////////////////////////////////////////////
@@ -982,6 +1027,7 @@ ia64_set_kernel_registers:
         add temp4=temp4, temp1  // &struct ia64_sal_os_state.os_gp
         add r12=temp1, temp3    // kernel stack pointer on MCA/INIT stack
         add r13=temp1, r3       // set current to start of MCA/INIT stack
+        add r20=temp1, r3       // physical start of MCA/INIT stack
         ;;
         ld8 r1=[temp4]          // OS GP from SAL OS state
         ;;
@@ -991,7 +1037,35 @@ ia64_set_kernel_registers:
         ;;
         mov IA64_KR(CURRENT)=r13
 
-        // FIXME: do I need to wire IA64_KR_CURRENT_STACK and IA64_TR_CURRENT_STACK?
+        /* Wire IA64_TR_CURRENT_STACK to the MCA/INIT handler stack.  To avoid
+         * any dependencies on the algorithm in ia64_switch_to(), just purge
+         * any existing CURRENT_STACK mapping and insert the new one.
+         */
+
+        mov r16=IA64_KR(CURRENT_STACK)          // physical granule mapped by IA64_TR_CURRENT_STACK
+        ;;
+        shl r16=r16,IA64_GRANULE_SHIFT
+        ;;
+        dep r16=-1,r16,61,3                     // virtual granule
+        mov r18=IA64_GRANULE_SHIFT<<2           // for cr.itir.ps
+        ;;
+        ptr.d r16,r18
+        ;;
+        srlz.d
+
+        shr.u r16=r20,IA64_GRANULE_SHIFT        // r20 = physical start of MCA/INIT stack
+        movl r21=PAGE_KERNEL                    // page properties
+        ;;
+        mov IA64_KR(CURRENT_STACK)=r16
+        or r21=r20,r21                          // construct PA | page properties
+        ;;
+        mov cr.itir=r18
+        mov cr.ifa=r13
+        mov r20=IA64_TR_CURRENT_STACK
+        ;;
+        itr.d dtr[r20]=r21
+        ;;
+        srlz.d
 
         br.sptk b0
 
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 80f83d6cdbfc..f081c60ab206 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -56,8 +56,9 @@ static struct page *page_isolate[MAX_PAGE_ISOLATE];
 static int num_page_isolate = 0;
 
 typedef enum {
-        ISOLATE_NG = 0,
-        ISOLATE_OK = 1
+        ISOLATE_NG,
+        ISOLATE_OK,
+        ISOLATE_NONE
 } isolate_status_t;
 
 /*
@@ -74,7 +75,7 @@ static struct {
  * @paddr:      poisoned memory location
  *
  * Return value:
- *      ISOLATE_OK / ISOLATE_NG
+ *      one of isolate_status_t, ISOLATE_OK/NG/NONE.
  */
 
 static isolate_status_t
@@ -85,7 +86,10 @@ mca_page_isolate(unsigned long paddr)
 
         /* whether physical address is valid or not */
         if (!ia64_phys_addr_valid(paddr))
-                return ISOLATE_NG;
+                return ISOLATE_NONE;
+
+        if (!pfn_valid(paddr))
+                return ISOLATE_NONE;
 
         /* convert physical address to physical page number */
         p = pfn_to_page(paddr>>PAGE_SHIFT);
@@ -122,10 +126,15 @@ mca_handler_bh(unsigned long paddr)
                 current->pid, current->comm);
 
         spin_lock(&mca_bh_lock);
-        if (mca_page_isolate(paddr) == ISOLATE_OK) {
+        switch (mca_page_isolate(paddr)) {
+        case ISOLATE_OK:
                 printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
-        } else {
+                break;
+        case ISOLATE_NG:
                 printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+                break;
+        default:
+                break;
         }
         spin_unlock(&mca_bh_lock);
 
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 1fb92f16acd6..b1457a8a9c0f 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -15,9 +15,8 @@ extra-y				+= vmlinux.lds
 obj-y                           := entry.o traps.o irq.o idle.o time.o misc.o \
                                         process.o signal.o ptrace.o align.o \
                                         semaphore.o syscalls.o setup.o \
-                                        cputable.o ppc_htab.o
+                                        cputable.o ppc_htab.o perfmon.o
 obj-$(CONFIG_6xx)               += l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_E500)              += perfmon.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)  += swsusp.o
 obj-$(CONFIG_POWER4)            += cpu_setup_power4.o
 obj-$(CONFIG_MODULES)           += module.o ppc_ksyms.o
diff --git a/arch/ppc/kernel/perfmon.c b/arch/ppc/kernel/perfmon.c
index fa1dad96b830..04c18788e85f 100644
--- a/arch/ppc/kernel/perfmon.c
+++ b/arch/ppc/kernel/perfmon.c
@@ -45,7 +45,7 @@ static void dummy_perf(struct pt_regs *regs)
         mtpmr(PMRN_PMGC0, pmgc0);
 }
 
-#else
+#elif CONFIG_6xx
 /* Ensure exceptions are disabled */
 
 static void dummy_perf(struct pt_regs *regs)
@@ -55,6 +55,10 @@ static void dummy_perf(struct pt_regs *regs)
         mmcr0 &= ~MMCR0_PMXE;
         mtspr(SPRN_MMCR0, mmcr0);
 }
+#else
+static void dummy_perf(struct pt_regs *regs)
+{
+}
 #endif
 
 void (*perf_irq)(struct pt_regs *) = dummy_perf;
diff --git a/arch/ppc/platforms/pmac_setup.c b/arch/ppc/platforms/pmac_setup.c
index b392b9a15987..4c56a4734aec 100644
--- a/arch/ppc/platforms/pmac_setup.c
+++ b/arch/ppc/platforms/pmac_setup.c
@@ -719,7 +719,8 @@ pmac_declare_of_platform_devices(void)
         if (np) {
                 for (np = np->child; np != NULL; np = np->sibling)
                         if (strncmp(np->name, "i2c", 3) == 0) {
-                                of_platform_device_create(np, "uni-n-i2c");
+                                of_platform_device_create(np, "uni-n-i2c",
+                                                          NULL);
                                 break;
                         }
         }
@@ -727,17 +728,18 @@ pmac_declare_of_platform_devices(void)
         if (np) {
                 for (np = np->child; np != NULL; np = np->sibling)
                         if (strncmp(np->name, "i2c", 3) == 0) {
-                                of_platform_device_create(np, "u3-i2c");
+                                of_platform_device_create(np, "u3-i2c",
+                                                          NULL);
                                 break;
                         }
         }
 
         np = find_devices("valkyrie");
         if (np)
-                of_platform_device_create(np, "valkyrie");
+                of_platform_device_create(np, "valkyrie", NULL);
         np = find_devices("platinum");
         if (np)
-                of_platform_device_create(np, "platinum");
+                of_platform_device_create(np, "platinum", NULL);
 
         return 0;
 }
diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c
index da8a0f2128dc..93c7231ea709 100644
--- a/arch/ppc/syslib/of_device.c
+++ b/arch/ppc/syslib/of_device.c
@@ -234,7 +234,9 @@ void of_device_unregister(struct of_device *ofdev)
         device_unregister(&ofdev->dev);
 }
 
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+                                            const char *bus_id,
+                                            struct device *parent)
 {
         struct of_device *dev;
         u32 *reg;
@@ -247,7 +249,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
         dev->node = of_node_get(np);
         dev->dma_mask = 0xffffffffUL;
         dev->dev.dma_mask = &dev->dma_mask;
-        dev->dev.parent = NULL;
+        dev->dev.parent = parent;
         dev->dev.bus = &of_platform_bus_type;
         dev->dev.release = of_release_dev;
 
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index b7242f1bd931..832b8bf99ae7 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -184,8 +184,8 @@ mpc85xx_setup_pci1(struct pci_controller *hose)
         pci->powar1 = 0x80044000 |
            (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
 
-        /* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
-        pci->potar2 = 0x00000000;
+        /* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
+        pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
         pci->potear2 = 0x00000000;
         pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
         /* Enable, IO R/W */
@@ -235,8 +235,8 @@ mpc85xx_setup_pci2(struct pci_controller *hose)
         pci->powar1 = 0x80044000 |
            (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
 
-        /* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
-        pci->potar2 = 0x00000000;
+        /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
+        pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
         pci->potear2 = 0x00000000;
         pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
         /* Enable, IO R/W */
diff --git a/arch/ppc64/kernel/of_device.c b/arch/ppc64/kernel/of_device.c
index da580812ddfe..9f200f0f2ad5 100644
--- a/arch/ppc64/kernel/of_device.c
+++ b/arch/ppc64/kernel/of_device.c
@@ -233,7 +233,9 @@ void of_device_unregister(struct of_device *ofdev)
         device_unregister(&ofdev->dev);
 }
 
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+                                            const char *bus_id,
+                                            struct device *parent)
 {
         struct of_device *dev;
 
@@ -245,7 +247,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
         dev->node = np;
         dev->dma_mask = 0xffffffffUL;
         dev->dev.dma_mask = &dev->dma_mask;
-        dev->dev.parent = NULL;
+        dev->dev.parent = parent;
         dev->dev.bus = &of_platform_bus_type;
         dev->dev.release = of_release_dev;
 
@@ -259,6 +261,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
         return dev;
 }
 
+
 EXPORT_SYMBOL(of_match_device);
 EXPORT_SYMBOL(of_platform_bus_type);
 EXPORT_SYMBOL(of_register_driver);
diff --git a/arch/ppc64/kernel/pSeries_iommu.c b/arch/ppc64/kernel/pSeries_iommu.c
index 8c6313e7e145..d17f0108a032 100644
--- a/arch/ppc64/kernel/pSeries_iommu.c
+++ b/arch/ppc64/kernel/pSeries_iommu.c
@@ -364,7 +364,8 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus)
 
                 while (pci->phb->dma_window_size * children > 0x80000000ul)
                         pci->phb->dma_window_size >>= 1;
-                DBG("No ISA/IDE, window size is %x\n", pci->phb->dma_window_size);
+                DBG("No ISA/IDE, window size is 0x%lx\n",
+                        pci->phb->dma_window_size);
                 pci->phb->dma_window_base_cur = 0;
 
                 return;
@@ -388,7 +389,7 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus)
         while (pci->phb->dma_window_size * children > 0x70000000ul)
                 pci->phb->dma_window_size >>= 1;
 
-        DBG("ISA/IDE, window size is %x\n", pci->phb->dma_window_size);
+        DBG("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size);
 
 }
 
@@ -442,7 +443,7 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev)
         struct device_node *dn, *mydn;
         struct iommu_table *tbl;
 
-        DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name);
+        DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, pci_name(dev));
 
         mydn = dn = pci_device_to_OF_node(dev);
 
@@ -469,7 +470,7 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev)
         if (dn && dn->data) {
                 PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table;
         } else {
-                DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name);
+                DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev));
         }
 }
 
@@ -503,7 +504,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
         int *dma_window = NULL;
         struct pci_dn *pci;
 
-        DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name);
+        DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev));
 
         /* dev setup for LPAR is a little tricky, since the device tree might
          * contain the dma-window properties per-device and not neccesarily
@@ -525,9 +526,8 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
          * slots on POWER4 machines.
          */
         if (dma_window == NULL || pdn->parent == NULL) {
-                /* Fall back to regular (non-LPAR) dev setup */
-                DBG("No dma window for device, falling back to regular setup\n");
-                iommu_dev_setup_pSeries(dev);
+                DBG("No dma window for device, linking to parent\n");
+                PCI_DN(dn)->iommu_table = PCI_DN(pdn)->iommu_table;
                 return;
         } else {
                 DBG("Found DMA window, allocating table\n");
diff --git a/arch/ppc64/kernel/pmac_setup.c b/arch/ppc64/kernel/pmac_setup.c
index 325426c7bed0..25755252067a 100644
--- a/arch/ppc64/kernel/pmac_setup.c
+++ b/arch/ppc64/kernel/pmac_setup.c
@@ -434,15 +434,23 @@ static int pmac_check_legacy_ioport(unsigned int baseport)
 
 static int __init pmac_declare_of_platform_devices(void)
 {
-        struct device_node *np;
+        struct device_node *np, *npp;
 
-        np = find_devices("u3");
-        if (np) {
-                for (np = np->child; np != NULL; np = np->sibling)
+        npp = of_find_node_by_name(NULL, "u3");
+        if (npp) {
+                for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
                         if (strncmp(np->name, "i2c", 3) == 0) {
-                                of_platform_device_create(np, "u3-i2c");
+                                of_platform_device_create(np, "u3-i2c", NULL);
+                                of_node_put(np);
                                 break;
                         }
+                }
+                of_node_put(npp);
+        }
+        npp = of_find_node_by_type(NULL, "smu");
+        if (npp) {
+                of_platform_device_create(npp, "smu", NULL);
+                of_node_put(npp);
         }
 
         return 0;
diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c
index 3059edb09cc8..41bbb8c59697 100644
--- a/arch/ppc64/kernel/pmac_time.c
+++ b/arch/ppc64/kernel/pmac_time.c
@@ -84,7 +84,7 @@ void __pmac pmac_get_rtc_time(struct rtc_time *tm)
 
 #ifdef CONFIG_PMAC_SMU
         case SYS_CTRLER_SMU:
-                smu_get_rtc_time(tm);
+                smu_get_rtc_time(tm, 1);
                 break;
 #endif /* CONFIG_PMAC_SMU */
         default:
@@ -128,7 +128,7 @@ int __pmac pmac_set_rtc_time(struct rtc_time *tm)
 
 #ifdef CONFIG_PMAC_SMU
         case SYS_CTRLER_SMU:
-                return smu_set_rtc_time(tm);
+                return smu_set_rtc_time(tm, 1);
 #endif /* CONFIG_PMAC_SMU */
         default:
                 return -ENODEV;
diff --git a/arch/ppc64/kernel/ptrace.c b/arch/ppc64/kernel/ptrace.c
index 85ed3188a91d..b1c044ca5756 100644
--- a/arch/ppc64/kernel/ptrace.c
+++ b/arch/ppc64/kernel/ptrace.c
@@ -219,6 +219,7 @@ int sys_ptrace(long request, long pid, long addr, long data)
 
         case PTRACE_SET_DEBUGREG:
                 ret = ptrace_set_debugreg(child, addr, data);
+                break;
 
         case PTRACE_DETACH:
                 ret = ptrace_detach(child, data);
diff --git a/arch/ppc64/mm/hash_native.c b/arch/ppc64/mm/hash_native.c
index 7626bb59954d..eb1bbb5b6c16 100644
--- a/arch/ppc64/mm/hash_native.c
+++ b/arch/ppc64/mm/hash_native.c
@@ -343,9 +343,7 @@ static void native_flush_hash_range(unsigned long context,
         hpte_t *hptep;
         unsigned long hpte_v;
         struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-        /* XXX fix for large ptes */
-        unsigned long large = 0;
+        unsigned long large;
 
         local_irq_save(flags);
 
@@ -358,6 +356,7 @@ static void native_flush_hash_range(unsigned long context,
 
                 va = (vsid << 28) | (batch->addr[i] & 0x0fffffff);
                 batch->vaddr[j] = va;
+                large = pte_huge(batch->pte[i]);
                 if (large)
                         vpn = va >> HPAGE_SHIFT;
                 else
diff --git a/arch/ppc64/mm/hugetlbpage.c b/arch/ppc64/mm/hugetlbpage.c
index 338771ec70d7..0ea0994ed974 100644
--- a/arch/ppc64/mm/hugetlbpage.c
+++ b/arch/ppc64/mm/hugetlbpage.c
@@ -710,10 +710,13 @@ repeat:
                         hpte_group = ((~hash & htab_hash_mask) *
                                       HPTES_PER_GROUP) & ~0x7UL; 
                         slot = ppc_md.hpte_insert(hpte_group, va, prpn,
-                                                  HPTE_V_LARGE, rflags);
+                                                  HPTE_V_LARGE |
+                                                  HPTE_V_SECONDARY,
+                                                  rflags);
                         if (slot == -1) {
                                 if (mftb() & 0x1)
-                                        hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+                                        hpte_group = ((hash & htab_hash_mask) *
+                                                      HPTES_PER_GROUP)&~0x7UL;
 
                                 ppc_md.hpte_remove(hpte_group);
                                 goto repeat;
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 14a12d6b3df6..16e7dc89f61d 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -19,18 +19,44 @@
 #include "line.h"
 #include "os.h"
 
-#ifdef CONFIG_NOCONFIG_CHAN
+/* XXX: could well be moved to somewhere else, if needed. */
+static int my_printf(const char * fmt, ...)
+        __attribute__ ((format (printf, 1, 2)));
+
+static int my_printf(const char * fmt, ...)
+{
+        /* Yes, can be called on atomic context.*/
+        char *buf = kmalloc(4096, GFP_ATOMIC);
+        va_list args;
+        int r;
+
+        if (!buf) {
+                /* We print directly fmt.
+                 * Yes, yes, yes, feel free to complain. */
+                r = strlen(fmt);
+        } else {
+                va_start(args, fmt);
+                r = vsprintf(buf, fmt, args);
+                va_end(args);
+                fmt = buf;
+        }
 
-/* The printk's here are wrong because we are complaining that there is no
- * output device, but printk is printing to that output device.  The user will
- * never see the error.  printf would be better, except it can't run on a
- * kernel stack because it will overflow it.
- * Use printk for now since that will avoid crashing.
- */
+        if (r)
+                r = os_write_file(1, fmt, r);
+        return r;
+
+}
+
+#ifdef CONFIG_NOCONFIG_CHAN
+/* Despite its name, there's no added trailing newline. */
+static int my_puts(const char * buf)
+{
+        return os_write_file(1, buf, strlen(buf));
+}
 
 static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 {
-        printk(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
         return(NULL);
 }
@@ -38,27 +64,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 static int not_configged_open(int input, int output, int primary, void *data,
                               char **dev_out)
 {
-        printk(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
         return(-ENODEV);
 }
 
 static void not_configged_close(int fd, void *data)
 {
-        printk(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
 }
 
 static int not_configged_read(int fd, char *c_out, void *data)
 {
-        printk(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
         return(-EIO);
 }
 
 static int not_configged_write(int fd, const char *buf, int len, void *data)
 {
-        printk(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
         return(-EIO);
 }
@@ -66,7 +92,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data)
 static int not_configged_console_write(int fd, const char *buf, int len,
                                        void *data)
 {
-        printk(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
         return(-EIO);
 }
@@ -74,14 +100,14 @@ static int not_configged_console_write(int fd, const char *buf, int len,
 static int not_configged_window_size(int fd, void *data, unsigned short *rows,
                                      unsigned short *cols)
 {
-        printk(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
         return(-ENODEV);
 }
 
 static void not_configged_free(void *data)
 {
-        printf(KERN_ERR "Using a channel type which is configured out of "
+        my_puts("Using a channel type which is configured out of "
                "UML\n");
 }
 
@@ -457,7 +483,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
                 }
         }
         if(ops == NULL){
-                printk(KERN_ERR "parse_chan couldn't parse \"%s\"\n", 
+                my_printf("parse_chan couldn't parse \"%s\"\n",
                        str);
                 return(NULL);
         }
@@ -465,7 +491,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
         data = (*ops->init)(str, device, opts);
         if(data == NULL) return(NULL);
 
-        chan = kmalloc(sizeof(*chan), GFP_KERNEL);
+        chan = kmalloc(sizeof(*chan), GFP_ATOMIC);
         if(chan == NULL) return(NULL);
         *chan = ((struct chan) { .list          = LIST_HEAD_INIT(chan->list),
                                  .primary       = 1,
diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c
index 310c1f823f26..04383f98f4d5 100644
--- a/arch/um/drivers/mconsole_user.c
+++ b/arch/um/drivers/mconsole_user.c
@@ -23,7 +23,7 @@ static struct mconsole_command commands[] = {
         { "reboot", mconsole_reboot, MCONSOLE_PROC },
         { "config", mconsole_config, MCONSOLE_PROC },
         { "remove", mconsole_remove, MCONSOLE_PROC },
-        { "sysrq", mconsole_sysrq, MCONSOLE_INTR },
+        { "sysrq", mconsole_sysrq, MCONSOLE_PROC },
         { "help", mconsole_help, MCONSOLE_INTR },
         { "cad", mconsole_cad, MCONSOLE_INTR },
         { "stop", mconsole_stop, MCONSOLE_PROC },
diff --git a/arch/um/include/user.h b/arch/um/include/user.h
index 57ee9e261228..0f865ef46918 100644
--- a/arch/um/include/user.h
+++ b/arch/um/include/user.h
@@ -14,7 +14,9 @@ extern void *um_kmalloc_atomic(int size);
 extern void kfree(void *ptr);
 extern int in_aton(char *str);
 extern int open_gdb_chan(void);
-extern int strlcpy(char *, const char *, int);
+/* These use size_t, however unsigned long is correct on both i386 and x86_64. */
+extern unsigned long strlcpy(char *, const char *, unsigned long);
+extern unsigned long strlcat(char *, const char *, unsigned long);
 extern void *um_vmalloc(int size);
 extern void vfree(void *ptr);
 
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index 39cf568ccfaf..ea65db679e9c 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -82,7 +82,8 @@ unsigned long alloc_stack(int order, int atomic)
         unsigned long page;
         int flags = GFP_KERNEL;
 
-        if(atomic) flags |= GFP_ATOMIC;
+        if (atomic)
+                flags = GFP_ATOMIC;
         page = __get_free_pages(flags, order);
         if(page == 0)
                 return(0);
diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c
index e89218958f38..a52751108aa1 100644
--- a/arch/um/kernel/sigio_user.c
+++ b/arch/um/kernel/sigio_user.c
@@ -340,7 +340,7 @@ static int setup_initial_poll(int fd)
 {
         struct pollfd *p;
 
-        p = um_kmalloc(sizeof(struct pollfd));
+        p = um_kmalloc_atomic(sizeof(struct pollfd));
         if(p == NULL){
                 printk("setup_initial_poll : failed to allocate poll\n");
                 return(-1);
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index 0a562c3c0fd8..f5b0636f9ad7 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -193,12 +193,12 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
                 r = pte_read(*npte);
                 w = pte_write(*npte);
                 x = pte_exec(*npte);
-                if(!pte_dirty(*npte))
-                        w = 0;
-                if(!pte_young(*npte)){
-                        r = 0;
-                        w = 0;
-                }
+                if (!pte_young(*npte)) {
+                        r = 0;
+                        w = 0;
+                } else if (!pte_dirty(*npte)) {
+                        w = 0;
+                }
                 if(force || pte_newpage(*npte)){
                         if(pte_present(*npte))
                           ret = add_mmap(addr,
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index 87cc6fd76ced..d297429ac360 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -18,6 +18,7 @@
 #include "asm/a.out.h"
 #include "asm/current.h"
 #include "asm/irq.h"
+#include "sysdep/sigcontext.h"
 #include "user_util.h"
 #include "kern_util.h"
 #include "kern.h"
@@ -39,6 +40,12 @@ int handle_page_fault(unsigned long address, unsigned long ip,
         int err = -EFAULT;
 
         *code_out = SEGV_MAPERR;
+
+        /* If the fault was during atomic operation, don't take the fault, just
+         * fail. */
+        if (in_atomic())
+                goto out_nosemaphore;
+
         down_read(&mm->mmap_sem);
         vma = find_vma(mm, address);
         if(!vma) 
@@ -89,6 +96,7 @@ survive:
         flush_tlb_page(vma, address);
 out:
         up_read(&mm->mmap_sem);
+out_nosemaphore:
         return(err);
 
 /*
@@ -125,7 +133,15 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
         }
         else if(current->mm == NULL)
                 panic("Segfault with no mm");
-        err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+
+        if (SEGV_IS_FIXABLE(&fi))
+                err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+        else {
+                err = -EFAULT;
+                /* A thread accessed NULL, we get a fault, but CR2 is invalid.
+                 * This code is used in __do_copy_from_user() of TT mode. */
+                address = 0;
+        }
 
         catcher = current->thread.fault_catcher;
         if(!err)
diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c
index f01475512ecb..8c220f054b61 100644
--- a/arch/um/kernel/tt/uaccess_user.c
+++ b/arch/um/kernel/tt/uaccess_user.c
@@ -22,8 +22,15 @@ int __do_copy_from_user(void *to, const void *from, int n,
                                __do_copy, &faulted);
         TASK_REGS(get_current())->tt = save;
 
-        if(!faulted) return(0);
-        else return(n - (fault - (unsigned long) from));
+        if(!faulted)
+                return 0;
+        else if (fault)
+                return n - (fault - (unsigned long) from);
+        else
+                /* In case of a general protection fault, we don't have the
+                 * fault address, so NULL is used instead. Pretend we didn't
+                 * copy anything. */
+                return n;
 }
 
 static void __do_strncpy(void *dst, const void *src, int count)
diff --git a/arch/um/kernel/umid.c b/arch/um/kernel/umid.c
index 186c28885016..0b21d59ba0cd 100644
--- a/arch/um/kernel/umid.c
+++ b/arch/um/kernel/umid.c
@@ -31,6 +31,8 @@ static char *uml_dir = UML_DIR;
 /* Changed by set_umid */
 static int umid_is_random = 1;
 static int umid_inited = 0;
+/* Have we created the files? Should we remove them? */
+static int umid_owned = 0;
 
 static int make_umid(int (*printer)(const char *fmt, ...));
 
@@ -82,20 +84,21 @@ int __init umid_file_name(char *name, char *buf, int len)
 
 extern int tracing_pid;
 
-static int __init create_pid_file(void)
+static void __init create_pid_file(void)
 {
         char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
         char pid[sizeof("nnnnn\0")];
         int fd, n;
 
-        if(umid_file_name("pid", file, sizeof(file))) return 0;
+        if(umid_file_name("pid", file, sizeof(file)))
+                return;
 
         fd = os_open_file(file, of_create(of_excl(of_rdwr(OPENFLAGS()))), 
                           0644);
         if(fd < 0){
                 printf("Open of machine pid file \"%s\" failed: %s\n",
                        file, strerror(-fd));
-                return 0;
+                return;
         }
 
         sprintf(pid, "%d\n", os_getpid());
@@ -103,7 +106,6 @@ static int __init create_pid_file(void)
         if(n != strlen(pid))
                 printf("Write of pid file failed - err = %d\n", -n);
         os_close_file(fd);
-        return 0;
 }
 
 static int actually_do_remove(char *dir)
@@ -147,7 +149,8 @@ static int actually_do_remove(char *dir)
 void remove_umid_dir(void)
 {
         char dir[strlen(uml_dir) + UMID_LEN + 1];
-        if(!umid_inited) return;
+        if (!umid_owned)
+                return;
 
         sprintf(dir, "%s%s", uml_dir, umid);
         actually_do_remove(dir);
@@ -155,11 +158,12 @@ void remove_umid_dir(void)
 
 char *get_umid(int only_if_set)
 {
-        if(only_if_set && umid_is_random) return(NULL);
-        return(umid);
+        if(only_if_set && umid_is_random)
+                return NULL;
+        return umid;
 }
 
-int not_dead_yet(char *dir)
+static int not_dead_yet(char *dir)
 {
         char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
         char pid[sizeof("nnnnn\0")], *end;
@@ -193,7 +197,8 @@ int not_dead_yet(char *dir)
                    (p == CHOOSE_MODE(tracing_pid, os_getpid())))
                         dead = 1;
         }
-        if(!dead) return(1);
+        if(!dead)
+                return(1);
         return(actually_do_remove(dir));
 }
 
@@ -232,16 +237,13 @@ static int __init make_uml_dir(void)
                 strlcpy(dir, home, sizeof(dir));
                 uml_dir++;
         }
+        strlcat(dir, uml_dir, sizeof(dir));
         len = strlen(dir);
-        strncat(dir, uml_dir, sizeof(dir) - len);
-        len = strlen(dir);
-        if((len > 0) && (len < sizeof(dir) - 1) && (dir[len - 1] != '/')){
-                dir[len] = '/';
-                dir[len + 1] = '\0';
-        }
+        if (len > 0 && dir[len - 1] != '/')
+                strlcat(dir, "/", sizeof(dir));
 
         uml_dir = malloc(strlen(dir) + 1);
-        if(uml_dir == NULL){
+        if (uml_dir == NULL) {
                 printf("make_uml_dir : malloc failed, errno = %d\n", errno);
                 exit(1);
         }
@@ -286,6 +288,7 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
                 if(errno == EEXIST){
                         if(not_dead_yet(tmp)){
                                 (*printer)("umid '%s' is in use\n", umid);
+                                umid_owned = 0;
                                 return(-1);
                         }
                         err = mkdir(tmp, 0777);
@@ -296,7 +299,8 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
                 return(-1);
         }
 
-        return(0);
+        umid_owned = 1;
+        return 0;
 }
 
 __uml_setup("uml_dir=", set_uml_dir,
@@ -309,7 +313,8 @@ static int __init make_umid_setup(void)
         /* one function with the ordering we need ... */
         make_uml_dir();
         make_umid(printf);
-        return create_pid_file();
+        create_pid_file();
+        return 0;
 }
 __uml_postsetup(make_umid_setup);
 
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index 09887c96e9a1..de19501aa809 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -402,8 +402,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
         __pci_mmap_set_flags(dev, vma, mmap_state);
         __pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine);
 
-        ret = io_remap_page_range(vma, vma->vm_start, vma->vm_pgoff<<PAGE_SHIFT,
-                               vma->vm_end - vma->vm_start, vma->vm_page_prot);
+        ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+                                 vma->vm_end - vma->vm_start,vma->vm_page_prot);
 
         return ret;
 }
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index cf1362784443..03674daabc66 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -39,7 +39,7 @@ _F(int,  pcibios_fixup, (void), { return 0; });
 _F(int, get_rtc_time, (time_t* t), { return 0; });
 _F(int, set_rtc_time, (time_t t), { return 0; });
 
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 _F(void, calibrate_ccount, (void),
 {
   printk ("ERROR: Cannot calibrate cpu frequency! Assuming 100MHz.\n");
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index c83bb0d41787..08ef6d82ee51 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -457,7 +457,7 @@ int
 dump_task_fpu(struct pt_regs *regs, struct task_struct *task, elf_fpregset_t *r)
 {
 /* see asm/coprocessor.h for this magic number 16 */
-#if TOTAL_CPEXTRA_SIZE > 16
+#if XTENSA_CP_EXTRA_SIZE > 16
         do_save_fpregs (r, regs, task);
 
         /*  For now, bit 16 means some extra state may be present:  */
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 1f5bf5d624e4..513ed8d67766 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p)
 # endif
 #endif
 
-#if CONFIG_PCI
+#ifdef CONFIG_PCI
         platform_pcibios_init();
 #endif
 }
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index dc42cede9394..e252b61e45a5 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -182,7 +182,7 @@ restore_cpextra (struct _cpstate *buf)
 
         struct task_struct *tsk = current;
         release_all_cp(tsk);
-        return __copy_from_user(tsk->thread.cpextra, buf, TOTAL_CPEXTRA_SIZE);
+        return __copy_from_user(tsk->thread.cpextra, buf, XTENSA_CP_EXTRA_SIZE);
 #endif
         return 0;
 }
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 1ac7d5ce7456..8e423d1335ce 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -68,7 +68,7 @@ void __init time_init(void)
          * speed for the CALIBRATE.
          */
 
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
         printk("Calibrating CPU frequency ");
         platform_calibrate_ccount();
         printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 56aace84aaeb..5a91d6c9e66d 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -239,7 +239,7 @@ void __init mem_init(void)
         high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
         highmemsize = 0;
 
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
 #error HIGHGMEM not implemented in init.c
 #endif
 
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 3b112e3542f8..ce23dc8c18c5 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -669,6 +669,7 @@ void class_device_destroy(struct class *cls, dev_t devt)
 int class_device_rename(struct class_device *class_dev, char *new_name)
 {
         int error = 0;
+        char *old_class_name = NULL, *new_class_name = NULL;
 
         class_dev = class_device_get(class_dev);
         if (!class_dev)
@@ -677,12 +678,24 @@ int class_device_rename(struct class_device *class_dev, char *new_name)
         pr_debug("CLASS: renaming '%s' to '%s'\n", class_dev->class_id,
                  new_name);
 
+        if (class_dev->dev)
+                old_class_name = make_class_name(class_dev);
+
         strlcpy(class_dev->class_id, new_name, KOBJ_NAME_LEN);
 
         error = kobject_rename(&class_dev->kobj, new_name);
 
+        if (class_dev->dev) {
+                new_class_name = make_class_name(class_dev);
+                sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj,
+                                  new_class_name);
+                sysfs_remove_link(&class_dev->dev->kobj, old_class_name);
+        }
         class_device_put(class_dev);
 
+        kfree(old_class_name);
+        kfree(new_class_name);
+
         return error;
 }
 
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index d5bbce38282f..3565e9795301 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -40,6 +40,9 @@
  */
 void device_bind_driver(struct device * dev)
 {
+        if (klist_node_attached(&dev->knode_driver))
+                return;
+
         pr_debug("bound device '%s' to driver '%s'\n",
                  dev->bus_id, dev->driver->name);
         klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index aa0bf7ee008d..ed4d5006fe62 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -172,7 +172,7 @@ struct bulk_cs_wrap {
  */
 struct ub_dev;
 
-#define UB_MAX_REQ_SG   4
+#define UB_MAX_REQ_SG   9       /* cdrecord requires 32KB and maybe a header */
 #define UB_MAX_SECTORS 64
 
 /*
@@ -387,7 +387,7 @@ struct ub_dev {
         struct bulk_cs_wrap work_bcs;
         struct usb_ctrlrequest work_cr;
 
-        int sg_stat[UB_MAX_REQ_SG+1];
+        int sg_stat[6];
         struct ub_scsi_trace tr;
 };
 
@@ -525,12 +525,13 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
             "qlen %d qmax %d\n",
             sc->cmd_queue.qlen, sc->cmd_queue.qmax);
         cnt += sprintf(page + cnt,
-            "sg %d %d %d %d %d\n",
+            "sg %d %d %d %d %d .. %d\n",
             sc->sg_stat[0],
             sc->sg_stat[1],
             sc->sg_stat[2],
             sc->sg_stat[3],
-            sc->sg_stat[4]);
+            sc->sg_stat[4],
+            sc->sg_stat[5]);
 
         list_for_each (p, &sc->luns) {
                 lun = list_entry(p, struct ub_lun, link);
@@ -835,7 +836,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
                 return -1;
         }
         cmd->nsg = n_elem;
-        sc->sg_stat[n_elem]++;
+        sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
 
         /*
          * build the command
@@ -891,7 +892,7 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
                 return -1;
         }
         cmd->nsg = n_elem;
-        sc->sg_stat[n_elem]++;
+        sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
 
         memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
         cmd->cdb_len = rq->cmd_len;
@@ -1010,7 +1011,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
         sc->last_pipe = sc->send_bulk_pipe;
         usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
             bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
-        sc->work_urb.transfer_flags = 0;
 
         /* Fill what we shouldn't be filling, because usb-storage did so. */
         sc->work_urb.actual_length = 0;
@@ -1019,7 +1019,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
         if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
                 /* XXX Clear stalls */
-                printk("ub: cmd #%d start failed (%d)\n", cmd->tag, rc); /* P3 */
                 ub_complete(&sc->work_done);
                 return rc;
         }
@@ -1190,11 +1189,9 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
                         return;
                 }
                 if (urb->status != 0) {
-                        printk("ub: cmd #%d cmd status (%d)\n", cmd->tag, urb->status); /* P3 */
                         goto Bad_End;
                 }
                 if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
-                        printk("ub: cmd #%d xferred %d\n", cmd->tag, urb->actual_length); /* P3 */
                         /* XXX Must do reset here to unconfuse the device */
                         goto Bad_End;
                 }
@@ -1395,14 +1392,12 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
         usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
             page_address(sg->page) + sg->offset, sg->length,
             ub_urb_complete, sc);
-        sc->work_urb.transfer_flags = 0;
         sc->work_urb.actual_length = 0;
         sc->work_urb.error_count = 0;
         sc->work_urb.status = 0;
 
         if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
                 /* XXX Clear stalls */
-                printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
                 ub_complete(&sc->work_done);
                 ub_state_done(sc, cmd, rc);
                 return;
@@ -1442,7 +1437,6 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
         sc->last_pipe = sc->recv_bulk_pipe;
         usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
             &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
-        sc->work_urb.transfer_flags = 0;
         sc->work_urb.actual_length = 0;
         sc->work_urb.error_count = 0;
         sc->work_urb.status = 0;
@@ -1563,7 +1557,6 @@ static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 
         usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
             (unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
-        sc->work_urb.transfer_flags = 0;
         sc->work_urb.actual_length = 0;
         sc->work_urb.error_count = 0;
         sc->work_urb.status = 0;
@@ -2000,17 +1993,16 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
 
         usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
             (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
-        sc->work_urb.transfer_flags = 0;
         sc->work_urb.actual_length = 0;
         sc->work_urb.error_count = 0;
         sc->work_urb.status = 0;
 
         if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
                 if (rc == -EPIPE) {
-                        printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+                        printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n",
                              sc->name); /* P3 */
                 } else {
-                        printk(KERN_WARNING
+                        printk(KERN_NOTICE
                              "%s: Unable to submit GetMaxLUN (%d)\n",
                              sc->name, rc);
                 }
@@ -2028,6 +2020,18 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
         del_timer_sync(&timer);
         usb_kill_urb(&sc->work_urb);
 
+        if ((rc = sc->work_urb.status) < 0) {
+                if (rc == -EPIPE) {
+                        printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+                             sc->name); /* P3 */
+                } else {
+                        printk(KERN_NOTICE
+                             "%s: Error at GetMaxLUN (%d)\n",
+                             sc->name, rc);
+                }
+                goto err_io;
+        }
+
         if (sc->work_urb.actual_length != 1) {
                 printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
                     sc->work_urb.actual_length); /* P3 */
@@ -2048,6 +2052,7 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
         kfree(p);
         return nluns;
 
+err_io:
 err_submit:
         kfree(p);
 err_alloc:
@@ -2080,7 +2085,6 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
 
         usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
             (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
-        sc->work_urb.transfer_flags = 0;
         sc->work_urb.actual_length = 0;
         sc->work_urb.error_count = 0;
         sc->work_urb.status = 0;
@@ -2213,8 +2217,10 @@ static int ub_probe(struct usb_interface *intf,
          * This is needed to clear toggles. It is a problem only if we do
          * `rmmod ub && modprobe ub` without disconnects, but we like that.
          */
+#if 0 /* iPod Mini fails if we do this (big white iPod works) */
         ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
         ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+#endif
 
         /*
          * The way this is used by the startup code is a little specific.
@@ -2241,10 +2247,10 @@ static int ub_probe(struct usb_interface *intf,
         for (i = 0; i < 3; i++) {
                 if ((rc = ub_sync_getmaxlun(sc)) < 0) {
                         /* 
-                         * Some devices (i.e. Iomega Zip100) need this --
-                         * apparently the bulk pipes get STALLed when the
-                         * GetMaxLUN request is processed.
-                         * XXX I have a ZIP-100, verify it does this.
+                         * This segment is taken from usb-storage. They say
+                         * that ZIP-100 needs this, but my own ZIP-100 works
+                         * fine without this.
+                         * Still, it does not seem to hurt anything.
                          */
                         if (rc == -EPIPE) {
                                 ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
@@ -2313,7 +2319,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
         disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
         disk->fops = &ub_bd_fops;
         disk->private_data = lun;
-        disk->driverfs_dev = &sc->intf->dev;    /* XXX Many to one ok? */
+        disk->driverfs_dev = &sc->intf->dev;
 
         rc = -ENOMEM;
         if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
@@ -2466,9 +2472,6 @@ static int __init ub_init(void)
 {
         int rc;
 
-        /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
-                        sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
-
         if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
                 goto err_regblkdev;
         devfs_mk_dir(DEVFS_NAME);
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index de0379b6d502..c055bb630ffc 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -273,7 +273,6 @@ static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
 
         vma->vm_flags |= VM_IO;
         vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-        addr = __pa(addr);
 
         if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
                                         PAGE_SIZE, vma->vm_page_prot)) {
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 463351d4f942..32fa82c78c73 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2620,7 +2620,7 @@ void ipmi_smi_msg_received(ipmi_smi_t          intf,
         spin_lock_irqsave(&(intf->waiting_msgs_lock), flags);
         if (!list_empty(&(intf->waiting_msgs))) {
                 list_add_tail(&(msg->link), &(intf->waiting_msgs));
-                spin_unlock(&(intf->waiting_msgs_lock));
+                spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
                 goto out_unlock;
         }
         spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
@@ -2629,9 +2629,9 @@ void ipmi_smi_msg_received(ipmi_smi_t          intf,
         if (rv > 0) {
                 /* Could not handle the message now, just add it to a
                    list to handle later. */
-                spin_lock(&(intf->waiting_msgs_lock));
+                spin_lock_irqsave(&(intf->waiting_msgs_lock), flags);
                 list_add_tail(&(msg->link), &(intf->waiting_msgs));
-                spin_unlock(&(intf->waiting_msgs_lock));
+                spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
         } else if (rv == 0) {
                 ipmi_free_smi_msg(msg);
         }
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7e72e922b41c..db358cfa7cbf 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -418,12 +418,11 @@ config SENSORS_HDAPS
         help
           This driver provides support for the IBM Hard Drive Active Protection
           System (hdaps), which provides an accelerometer and other misc. data.
-          Supported laptops include the IBM ThinkPad T41, T42, T43, and R51.
-          The accelerometer data is readable via sysfs.
+          ThinkPads starting with the R50, T41, and X40 are supported.  The
+          accelerometer data is readable via sysfs.
 
-          This driver also provides an input class device, allowing the
-          laptop to act as a pinball machine-esque mouse.  This is off by
-          default but enabled via sysfs or the module parameter "mousedev".
+          This driver also provides an absolute input class device, allowing
+          the laptop to act as a pinball machine-esque joystick.
 
           Say Y here if you have an applicable laptop and want to experience
           the awesome power of hdaps.
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 4c56411f3993..7f0107613827 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -4,9 +4,9 @@
  * Copyright (C) 2005 Robert Love <rml@novell.com>
  * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
  *
- * The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad
- * T41, T42, T43, R50, R50p, R51, and X40, at least.  It provides a basic
- * two-axis accelerometer and other data, such as the device's temperature.
+ * The HardDisk Active Protection System (hdaps) is present in IBM ThinkPads
+ * starting with the R40, T41, and X40.  It provides a basic two-axis
+ * accelerometer and other data, such as the device's temperature.
  *
  * This driver is based on the document by Mark A. Smith available at
  * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial
@@ -487,24 +487,19 @@ static struct attribute_group hdaps_attribute_group = {
 
 /* Module stuff */
 
-/*
- * XXX: We should be able to return nonzero and halt the detection process.
- * But there is a bug in dmi_check_system() where a nonzero return from the
- * first match will result in a return of failure from dmi_check_system().
- * I fixed this; the patch is 2.6-git.  Once in a released tree, we can make
- * hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1.
- */
+/* hdaps_dmi_match - found a match.  return one, short-circuiting the hunt. */
 static int hdaps_dmi_match(struct dmi_system_id *id)
 {
         printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
-        return 0;
+        return 1;
 }
 
+/* hdaps_dmi_match_invert - found an inverted match. */
 static int hdaps_dmi_match_invert(struct dmi_system_id *id)
 {
         hdaps_invert = 1;
         printk(KERN_INFO "hdaps: inverting axis readings.\n");
-        return 0;
+        return hdaps_dmi_match(id);
 }
 
 #define HDAPS_DMI_MATCH_NORMAL(model)   {               \
@@ -534,6 +529,7 @@ static int __init hdaps_init(void)
                 HDAPS_DMI_MATCH_INVERT("ThinkPad R50p"),
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad R50"),
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad R51"),
+                HDAPS_DMI_MATCH_NORMAL("ThinkPad R52"),
                 HDAPS_DMI_MATCH_INVERT("ThinkPad T41p"),
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad T41"),
                 HDAPS_DMI_MATCH_INVERT("ThinkPad T42p"),
@@ -541,6 +537,7 @@ static int __init hdaps_init(void)
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
                 HDAPS_DMI_MATCH_NORMAL("ThinkPad X41 Tablet"),
+                HDAPS_DMI_MATCH_NORMAL("ThinkPad X41"),
                 { .ident = NULL }
         };
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8334496a7e0a..3badfec75b1c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -245,6 +245,18 @@ config I2C_KEYWEST
           This support is also available as a module.  If so, the module 
           will be called i2c-keywest.
 
+config I2C_PMAC_SMU
+        tristate "Powermac SMU I2C interface"
+        depends on I2C && PMAC_SMU
+        help
+          This supports the use of the I2C interface in the SMU
+          chip on recent Apple machines like the iMac G5.  It is used
+          among others by the thermal control driver for those machines.
+          Say Y if you have such a machine.
+
+          This support is also available as a module.  If so, the module
+          will be called i2c-pmac-smu.
+
 config I2C_MPC
         tristate "MPC107/824x/85xx/52xx"
         depends on I2C && PPC32
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 980b3e983670..f1df00f66c6c 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
 obj-$(CONFIG_I2C_IXP2000)       += i2c-ixp2000.o
 obj-$(CONFIG_I2C_IXP4XX)        += i2c-ixp4xx.o
 obj-$(CONFIG_I2C_KEYWEST)       += i2c-keywest.o
+obj-$(CONFIG_I2C_PMAC_SMU)      += i2c-pmac-smu.o
 obj-$(CONFIG_I2C_MPC)           += i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)       += i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)       += i2c-nforce2.o
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
new file mode 100644
index 000000000000..8a9f5648a23d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pmac-smu.c
@@ -0,0 +1,316 @@
+/*
+    i2c Support for Apple SMU Controller
+
+    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+                       <benh@kernel.crashing.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/smu.h>
+
+static int probe;
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple's SMU");
+MODULE_LICENSE("GPL");
+module_param(probe, bool, 0);
+
+
+/* Physical interface */
+struct smu_iface
+{
+        struct i2c_adapter      adapter;
+        struct completion       complete;
+        u32                     busid;
+};
+
+static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
+{
+        struct smu_iface        *iface = misc;
+        complete(&iface->complete);
+}
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 smu_smbus_xfer(      struct i2c_adapter*     adap,
+                                u16                     addr,
+                                unsigned short          flags,
+                                char                    read_write,
+                                u8                      command,
+                                int                     size,
+                                union i2c_smbus_data*   data)
+{
+        struct smu_iface        *iface = i2c_get_adapdata(adap);
+        struct smu_i2c_cmd      cmd;
+        int                     rc = 0;
+        int                     read = (read_write == I2C_SMBUS_READ);
+
+        cmd.info.bus = iface->busid;
+        cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
+
+        /* Prepare datas & select mode */
+        switch (size) {
+        case I2C_SMBUS_QUICK:
+                cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+                cmd.info.datalen = 0;
+                break;
+        case I2C_SMBUS_BYTE:
+                cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+                cmd.info.datalen = 1;
+                if (!read)
+                        cmd.info.data[0] = data->byte;
+                break;
+        case I2C_SMBUS_BYTE_DATA:
+                cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+                cmd.info.datalen = 1;
+                cmd.info.sublen = 1;
+                cmd.info.subaddr[0] = command;
+                cmd.info.subaddr[1] = 0;
+                cmd.info.subaddr[2] = 0;
+                if (!read)
+                        cmd.info.data[0] = data->byte;
+                break;
+        case I2C_SMBUS_WORD_DATA:
+                cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+                cmd.info.datalen = 2;
+                cmd.info.sublen = 1;
+                cmd.info.subaddr[0] = command;
+                cmd.info.subaddr[1] = 0;
+                cmd.info.subaddr[2] = 0;
+                if (!read) {
+                        cmd.info.data[0] = data->byte & 0xff;
+                        cmd.info.data[1] = (data->byte >> 8) & 0xff;
+                }
+                break;
+        /* Note that these are broken vs. the expected smbus API where
+         * on reads, the lenght is actually returned from the function,
+         * but I think the current API makes no sense and I don't want
+         * any driver that I haven't verified for correctness to go
+         * anywhere near a pmac i2c bus anyway ...
+         */
+        case I2C_SMBUS_BLOCK_DATA:
+                cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+                cmd.info.datalen = data->block[0] + 1;
+                if (cmd.info.datalen > 6)
+                        return -EINVAL;
+                if (!read)
+                        memcpy(cmd.info.data, data->block, cmd.info.datalen);
+                cmd.info.sublen = 1;
+                cmd.info.subaddr[0] = command;
+                cmd.info.subaddr[1] = 0;
+                cmd.info.subaddr[2] = 0;
+                break;
+        case I2C_SMBUS_I2C_BLOCK_DATA:
+                cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+                cmd.info.datalen = data->block[0];
+                if (cmd.info.datalen > 7)
+                        return -EINVAL;
+                if (!read)
+                        memcpy(cmd.info.data, &data->block[1],
+                               cmd.info.datalen);
+                cmd.info.sublen = 1;
+                cmd.info.subaddr[0] = command;
+                cmd.info.subaddr[1] = 0;
+                cmd.info.subaddr[2] = 0;
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+        /* Turn a standardsub read into a combined mode access */
+        if (read_write == I2C_SMBUS_READ &&
+            cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
+                cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
+
+        /* Finish filling command and submit it */
+        cmd.done = smu_i2c_done;
+        cmd.misc = iface;
+        rc = smu_queue_i2c(&cmd);
+        if (rc < 0)
+                return rc;
+        wait_for_completion(&iface->complete);
+        rc = cmd.status;
+
+        if (!read || rc < 0)
+                return rc;
+
+        switch (size) {
+        case I2C_SMBUS_BYTE:
+        case I2C_SMBUS_BYTE_DATA:
+                data->byte = cmd.info.data[0];
+                break;
+        case I2C_SMBUS_WORD_DATA:
+                data->word = ((u16)cmd.info.data[1]) << 8;
+                data->word |= cmd.info.data[0];
+                break;
+        /* Note that these are broken vs. the expected smbus API where
+         * on reads, the lenght is actually returned from the function,
+         * but I think the current API makes no sense and I don't want
+         * any driver that I haven't verified for correctness to go
+         * anywhere near a pmac i2c bus anyway ...
+         */
+        case I2C_SMBUS_BLOCK_DATA:
+        case I2C_SMBUS_I2C_BLOCK_DATA:
+                memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
+                break;
+        }
+
+        return rc;
+}
+
+static u32
+smu_smbus_func(struct i2c_adapter * adapter)
+{
+        return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+               I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+               I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm smu_algorithm = {
+        .smbus_xfer     = smu_smbus_xfer,
+        .functionality  = smu_smbus_func,
+};
+
+static int create_iface(struct device_node *np, struct device *dev)
+{
+        struct smu_iface* iface;
+        u32 *reg, busid;
+        int rc;
+
+        reg = (u32 *)get_property(np, "reg", NULL);
+        if (reg == NULL) {
+                printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
+                return -ENXIO;
+        }
+        busid = *reg;
+
+        iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL);
+        if (iface == NULL) {
+                printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
+                return -ENOMEM;
+        }
+        memset(iface, 0, sizeof(struct smu_iface));
+        init_completion(&iface->complete);
+        iface->busid = busid;
+
+        dev_set_drvdata(dev, iface);
+
+        sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
+        iface->adapter.algo = &smu_algorithm;
+        iface->adapter.algo_data = NULL;
+        iface->adapter.client_register = NULL;
+        iface->adapter.client_unregister = NULL;
+        i2c_set_adapdata(&iface->adapter, iface);
+        iface->adapter.dev.parent = dev;
+
+        rc = i2c_add_adapter(&iface->adapter);
+        if (rc) {
+                printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
+                       "failed\n", iface->adapter.name);
+                i2c_set_adapdata(&iface->adapter, NULL);
+        }
+
+        if (probe) {
+                unsigned char addr;
+                printk("Probe: ");
+                for (addr = 0x00; addr <= 0x7f; addr++) {
+                        if (i2c_smbus_xfer(&iface->adapter,addr,
+                                           0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+                                printk("%02x ", addr);
+                }
+                printk("\n");
+        }
+
+        printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
+
+        return 0;
+}
+
+static int dispose_iface(struct device *dev)
+{
+        struct smu_iface *iface = dev_get_drvdata(dev);
+        int rc;
+
+        rc = i2c_del_adapter(&iface->adapter);
+        i2c_set_adapdata(&iface->adapter, NULL);
+        /* We aren't that prepared to deal with this... */
+        if (rc)
+                printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
+                       iface->adapter.name);
+        dev_set_drvdata(dev, NULL);
+        kfree(iface);
+
+        return 0;
+}
+
+
+static int create_iface_of_platform(struct of_device* dev,
+                                    const struct of_device_id *match)
+{
+        return create_iface(dev->node, &dev->dev);
+}
+
+
+static int dispose_iface_of_platform(struct of_device* dev)
+{
+        return dispose_iface(&dev->dev);
+}
+
+
+static struct of_device_id i2c_smu_match[] =
+{
+        {
+                .compatible     = "smu-i2c",
+        },
+        {},
+};
+static struct of_platform_driver i2c_smu_of_platform_driver =
+{
+        .name           = "i2c-smu",
+        .match_table    = i2c_smu_match,
+        .probe          = create_iface_of_platform,
+        .remove         = dispose_iface_of_platform
+};
+
+
+static int __init i2c_pmac_smu_init(void)
+{
+        of_register_driver(&i2c_smu_of_platform_driver);
+        return 0;
+}
+
+
+static void __exit i2c_pmac_smu_cleanup(void)
+{
+        of_unregister_driver(&i2c_smu_of_platform_driver);
+}
+
+module_init(i2c_pmac_smu_init);
+module_exit(i2c_pmac_smu_cleanup);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 88636a204525..14ae5583e198 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -308,6 +308,7 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
                 MATCH_BIT(ledbit, LED_MAX);
                 MATCH_BIT(sndbit, SND_MAX);
                 MATCH_BIT(ffbit,  FF_MAX);
+                MATCH_BIT(swbit,  SW_MAX);
 
                 return id;
         }
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index 0a2536d62402..657817a591fe 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -209,9 +209,7 @@ static void st5481B_mode(struct st5481_bcs *bcs, int mode)
         bcs->mode = mode;
 
         // Cancel all USB transfers on this B channel
-        b_out->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
         usb_unlink_urb(b_out->urb[0]);
-        b_out->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
         usb_unlink_urb(b_out->urb[1]);
         b_out->busy = 0;
 
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index ffd5b2d45552..89fbeb58485d 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -645,9 +645,7 @@ void st5481_in_mode(struct st5481_in *in, int mode)
 
         in->mode = mode;
 
-        in->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
         usb_unlink_urb(in->urb[0]);
-        in->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
         usb_unlink_urb(in->urb[1]);
 
         if (in->mode != L1_MODE_NULL) {
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index fb535737d17d..a85ac18dd21d 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -8,21 +8,15 @@
  */
 
 /*
- * For now, this driver includes:
- * - RTC get & set
- * - reboot & shutdown commands
- * all synchronous with IRQ disabled (ugh)
- *
  * TODO:
- *   rework in a way the PMU driver works, that is asynchronous
- *   with a queue of commands. I'll do that as soon as I have an
- *   SMU based machine at hand. Some more cleanup is needed too,
- *   like maybe fitting it into a platform device, etc...
- *   Also check what's up with cache coherency, and if we really
- *   can't do better than flushing the cache, maybe build a table
- *   of command len/reply len like the PMU driver to only flush
- *   what is actually necessary.
- *   --BenH.
+ *  - maybe add timeout to commands ?
+ *  - blocking version of time functions
+ *  - polling version of i2c commands (including timer that works with
+ *    interrutps off)
+ *  - maybe avoid some data copies with i2c by directly using the smu cmd
+ *    buffer and a lower level internal interface
+ *  - understand SMU -> CPU events and implement reception of them via
+ *    the userland interface
  */
 
 #include <linux/config.h>
@@ -36,6 +30,11 @@
 #include <linux/jiffies.h>
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
+#include <linux/completion.h>
+#include <linux/miscdevice.h>
+#include <linux/delay.h>
+#include <linux/sysdev.h>
+#include <linux/poll.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -45,8 +44,13 @@
 #include <asm/smu.h>
 #include <asm/sections.h>
 #include <asm/abs_addr.h>
+#include <asm/uaccess.h>
+#include <asm/of_device.h>
+
+#define VERSION "0.6"
+#define AUTHOR  "(c) 2005 Benjamin Herrenschmidt, IBM Corp."
 
-#define DEBUG_SMU 1
+#undef DEBUG_SMU
 
 #ifdef DEBUG_SMU
 #define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
@@ -57,20 +61,30 @@
 /*
  * This is the command buffer passed to the SMU hardware
  */
+#define SMU_MAX_DATA    254
+
 struct smu_cmd_buf {
         u8 cmd;
         u8 length;
-        u8 data[0x0FFE];
+        u8 data[SMU_MAX_DATA];
 };
 
 struct smu_device {
         spinlock_t              lock;
         struct device_node      *of_node;
-        int                     db_ack;         /* doorbell ack GPIO */
-        int                     db_req;         /* doorbell req GPIO */
+        struct of_device        *of_dev;
+        int                     doorbell;       /* doorbell gpio */
         u32 __iomem             *db_buf;        /* doorbell buffer */
+        int                     db_irq;
+        int                     msg;
+        int                     msg_irq;
         struct smu_cmd_buf      *cmd_buf;       /* command buffer virtual */
         u32                     cmd_buf_abs;    /* command buffer absolute */
+        struct list_head        cmd_list;
+        struct smu_cmd          *cmd_cur;       /* pending command */
+        struct list_head        cmd_i2c_list;
+        struct smu_i2c_cmd      *cmd_i2c_cur;   /* pending i2c command */
+        struct timer_list       i2c_timer;
 };
 
 /*
@@ -79,113 +93,243 @@ struct smu_device {
  */
 static struct smu_device        *smu;
 
+
 /*
- * SMU low level communication stuff
+ * SMU driver low level stuff
  */
-static inline int smu_cmd_stat(struct smu_cmd_buf *cmd_buf, u8 cmd_ack)
-{
-        rmb();
-        return cmd_buf->cmd == cmd_ack && cmd_buf->length != 0;
-}
 
-static inline u8 smu_save_ack_cmd(struct smu_cmd_buf *cmd_buf)
+static void smu_start_cmd(void)
 {
-        return (~cmd_buf->cmd) & 0xff;
-}
+        unsigned long faddr, fend;
+        struct smu_cmd *cmd;
 
-static void smu_send_cmd(struct smu_device *dev)
-{
-        /* SMU command buf is currently cacheable, we need a physical
-         * address. This isn't exactly a DMA mapping here, I suspect
+        if (list_empty(&smu->cmd_list))
+                return;
+
+        /* Fetch first command in queue */
+        cmd = list_entry(smu->cmd_list.next, struct smu_cmd, link);
+        smu->cmd_cur = cmd;
+        list_del(&cmd->link);
+
+        DPRINTK("SMU: starting cmd %x, %d bytes data\n", cmd->cmd,
+                cmd->data_len);
+        DPRINTK("SMU: data buffer: %02x %02x %02x %02x ...\n",
+                ((u8 *)cmd->data_buf)[0], ((u8 *)cmd->data_buf)[1],
+                ((u8 *)cmd->data_buf)[2], ((u8 *)cmd->data_buf)[3]);
+
+        /* Fill the SMU command buffer */
+        smu->cmd_buf->cmd = cmd->cmd;
+        smu->cmd_buf->length = cmd->data_len;
+        memcpy(smu->cmd_buf->data, cmd->data_buf, cmd->data_len);
+
+        /* Flush command and data to RAM */
+        faddr = (unsigned long)smu->cmd_buf;
+        fend = faddr + smu->cmd_buf->length + 2;
+        flush_inval_dcache_range(faddr, fend);
+
+        /* This isn't exactly a DMA mapping here, I suspect
          * the SMU is actually communicating with us via i2c to the
          * northbridge or the CPU to access RAM.
          */
-        writel(dev->cmd_buf_abs, dev->db_buf);
+        writel(smu->cmd_buf_abs, smu->db_buf);
 
         /* Ring the SMU doorbell */
-        pmac_do_feature_call(PMAC_FTR_WRITE_GPIO, NULL, dev->db_req, 4);
-        pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, dev->db_req, 4);
+        pmac_do_feature_call(PMAC_FTR_WRITE_GPIO, NULL, smu->doorbell, 4);
 }
 
-static int smu_cmd_done(struct smu_device *dev)
+
+static irqreturn_t smu_db_intr(int irq, void *arg, struct pt_regs *regs)
 {
-        unsigned long wait = 0;
-        int gpio;
+        unsigned long flags;
+        struct smu_cmd *cmd;
+        void (*done)(struct smu_cmd *cmd, void *misc) = NULL;
+        void *misc = NULL;
+        u8 gpio;
+        int rc = 0;
 
-        /* Check the SMU doorbell */
-        do  {
-                gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO,
-                                            NULL, dev->db_ack);
-                if ((gpio & 7) == 7)
-                        return 0;
-                udelay(100);
-        } while(++wait < 10000);
+        /* SMU completed the command, well, we hope, let's make sure
+         * of it
+         */
+        spin_lock_irqsave(&smu->lock, flags);
 
-        printk(KERN_ERR "SMU timeout !\n");
-        return -ENXIO;
+        gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, smu->doorbell);
+        if ((gpio & 7) != 7)
+                return IRQ_HANDLED;
+
+        cmd = smu->cmd_cur;
+        smu->cmd_cur = NULL;
+        if (cmd == NULL)
+                goto bail;
+
+        if (rc == 0) {
+                unsigned long faddr;
+                int reply_len;
+                u8 ack;
+
+                /* CPU might have brought back the cache line, so we need
+                 * to flush again before peeking at the SMU response. We
+                 * flush the entire buffer for now as we haven't read the
+                 * reply lenght (it's only 2 cache lines anyway)
+                 */
+                faddr = (unsigned long)smu->cmd_buf;
+                flush_inval_dcache_range(faddr, faddr + 256);
+
+                /* Now check ack */
+                ack = (~cmd->cmd) & 0xff;
+                if (ack != smu->cmd_buf->cmd) {
+                        DPRINTK("SMU: incorrect ack, want %x got %x\n",
+                                ack, smu->cmd_buf->cmd);
+                        rc = -EIO;
+                }
+                reply_len = rc == 0 ? smu->cmd_buf->length : 0;
+                DPRINTK("SMU: reply len: %d\n", reply_len);
+                if (reply_len > cmd->reply_len) {
+                        printk(KERN_WARNING "SMU: reply buffer too small,"
+                               "got %d bytes for a %d bytes buffer\n",
+                               reply_len, cmd->reply_len);
+                        reply_len = cmd->reply_len;
+                }
+                cmd->reply_len = reply_len;
+                if (cmd->reply_buf && reply_len)
+                        memcpy(cmd->reply_buf, smu->cmd_buf->data, reply_len);
+        }
+
+        /* Now complete the command. Write status last in order as we lost
+         * ownership of the command structure as soon as it's no longer -1
+         */
+        done = cmd->done;
+        misc = cmd->misc;
+        mb();
+        cmd->status = rc;
+ bail:
+        /* Start next command if any */
+        smu_start_cmd();
+        spin_unlock_irqrestore(&smu->lock, flags);
+
+        /* Call command completion handler if any */
+        if (done)
+                done(cmd, misc);
+
+        /* It's an edge interrupt, nothing to do */
+        return IRQ_HANDLED;
 }
 
-static int smu_do_cmd(struct smu_device *dev)
+
+static irqreturn_t smu_msg_intr(int irq, void *arg, struct pt_regs *regs)
 {
-        int rc;
-        u8 cmd_ack;
+        /* I don't quite know what to do with this one, we seem to never
+         * receive it, so I suspect we have to arm it someway in the SMU
+         * to start getting events that way.
+         */
+
+        printk(KERN_INFO "SMU: message interrupt !\n");
 
-        DPRINTK("SMU do_cmd %02x len=%d %02x\n",
-                dev->cmd_buf->cmd, dev->cmd_buf->length,
-                dev->cmd_buf->data[0]);
+        /* It's an edge interrupt, nothing to do */
+        return IRQ_HANDLED;
+}
 
-        cmd_ack = smu_save_ack_cmd(dev->cmd_buf);
 
-        /* Clear cmd_buf cache lines */
-        flush_inval_dcache_range((unsigned long)dev->cmd_buf,
-                                 ((unsigned long)dev->cmd_buf) +
-                                 sizeof(struct smu_cmd_buf));
-        smu_send_cmd(dev);
-        rc = smu_cmd_done(dev);
-        if (rc == 0)
-                rc = smu_cmd_stat(dev->cmd_buf, cmd_ack) ? 0 : -1;
+/*
+ * Queued command management.
+ *
+ */
 
-        DPRINTK("SMU do_cmd %02x len=%d %02x => %d (%02x)\n",
-                dev->cmd_buf->cmd, dev->cmd_buf->length,
-                dev->cmd_buf->data[0], rc, cmd_ack);
+int smu_queue_cmd(struct smu_cmd *cmd)
+{
+        unsigned long flags;
 
-        return rc;
+        if (smu == NULL)
+                return -ENODEV;
+        if (cmd->data_len > SMU_MAX_DATA ||
+            cmd->reply_len > SMU_MAX_DATA)
+                return -EINVAL;
+
+        cmd->status = 1;
+        spin_lock_irqsave(&smu->lock, flags);
+        list_add_tail(&cmd->link, &smu->cmd_list);
+        if (smu->cmd_cur == NULL)
+                smu_start_cmd();
+        spin_unlock_irqrestore(&smu->lock, flags);
+
+        return 0;
 }
+EXPORT_SYMBOL(smu_queue_cmd);
 
-/* RTC low level commands */
-static inline int bcd2hex (int n)
+
+int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+                     unsigned int data_len,
+                     void (*done)(struct smu_cmd *cmd, void *misc),
+                     void *misc, ...)
 {
-        return (((n & 0xf0) >> 4) * 10) + (n & 0xf);
+        struct smu_cmd *cmd = &scmd->cmd;
+        va_list list;
+        int i;
+
+        if (data_len > sizeof(scmd->buffer))
+                return -EINVAL;
+
+        memset(scmd, 0, sizeof(*scmd));
+        cmd->cmd = command;
+        cmd->data_len = data_len;
+        cmd->data_buf = scmd->buffer;
+        cmd->reply_len = sizeof(scmd->buffer);
+        cmd->reply_buf = scmd->buffer;
+        cmd->done = done;
+        cmd->misc = misc;
+
+        va_start(list, misc);
+        for (i = 0; i < data_len; ++i)
+                scmd->buffer[i] = (u8)va_arg(list, int);
+        va_end(list);
+
+        return smu_queue_cmd(cmd);
 }
+EXPORT_SYMBOL(smu_queue_simple);
 
-static inline int hex2bcd (int n)
+
+void smu_poll(void)
 {
-        return ((n / 10) << 4) + (n % 10);
+        u8 gpio;
+
+        if (smu == NULL)
+                return;
+
+        gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, smu->doorbell);
+        if ((gpio & 7) == 7)
+                smu_db_intr(smu->db_irq, smu, NULL);
 }
+EXPORT_SYMBOL(smu_poll);
+
 
-#if 0
-static inline void smu_fill_set_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf)
+void smu_done_complete(struct smu_cmd *cmd, void *misc)
 {
-        cmd_buf->cmd = 0x8e;
-        cmd_buf->length = 8;
-        cmd_buf->data[0] = 0x00;
-        memset(cmd_buf->data + 1, 0, 7);
+        struct completion *comp = misc;
+
+        complete(comp);
 }
+EXPORT_SYMBOL(smu_done_complete);
+
 
-static inline void smu_fill_get_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf)
+void smu_spinwait_cmd(struct smu_cmd *cmd)
 {
-        cmd_buf->cmd = 0x8e;
-        cmd_buf->length = 1;
-        cmd_buf->data[0] = 0x01;
+        while(cmd->status == 1)
+                smu_poll();
+}
+EXPORT_SYMBOL(smu_spinwait_cmd);
+
+
+/* RTC low level commands */
+static inline int bcd2hex (int n)
+{
+        return (((n & 0xf0) >> 4) * 10) + (n & 0xf);
 }
 
-static inline void smu_fill_dis_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf)
+
+static inline int hex2bcd (int n)
 {
-        cmd_buf->cmd = 0x8e;
-        cmd_buf->length = 1;
-        cmd_buf->data[0] = 0x02;
+        return ((n / 10) << 4) + (n % 10);
 }
-#endif
+
 
 static inline void smu_fill_set_rtc_cmd(struct smu_cmd_buf *cmd_buf,
                                         struct rtc_time *time)
@@ -202,100 +346,96 @@ static inline void smu_fill_set_rtc_cmd(struct smu_cmd_buf *cmd_buf,
         cmd_buf->data[7] = hex2bcd(time->tm_year - 100);
 }
 
-static inline void smu_fill_get_rtc_cmd(struct smu_cmd_buf *cmd_buf)
-{
-        cmd_buf->cmd = 0x8e;
-        cmd_buf->length = 1;
-        cmd_buf->data[0] = 0x81;
-}
 
-static void smu_parse_get_rtc_reply(struct smu_cmd_buf *cmd_buf,
-                                    struct rtc_time *time)
+int smu_get_rtc_time(struct rtc_time *time, int spinwait)
 {
-        time->tm_sec = bcd2hex(cmd_buf->data[0]);
-        time->tm_min = bcd2hex(cmd_buf->data[1]);
-        time->tm_hour = bcd2hex(cmd_buf->data[2]);
-        time->tm_wday = bcd2hex(cmd_buf->data[3]);
-        time->tm_mday = bcd2hex(cmd_buf->data[4]);
-        time->tm_mon = bcd2hex(cmd_buf->data[5]) - 1;
-        time->tm_year = bcd2hex(cmd_buf->data[6]) + 100;
-}
-
-int smu_get_rtc_time(struct rtc_time *time)
-{
-        unsigned long flags;
+        struct smu_simple_cmd cmd;
         int rc;
 
         if (smu == NULL)
                 return -ENODEV;
 
         memset(time, 0, sizeof(struct rtc_time));
-        spin_lock_irqsave(&smu->lock, flags);
-        smu_fill_get_rtc_cmd(smu->cmd_buf);
-        rc = smu_do_cmd(smu);
-        if (rc == 0)
-                smu_parse_get_rtc_reply(smu->cmd_buf, time);
-        spin_unlock_irqrestore(&smu->lock, flags);
+        rc = smu_queue_simple(&cmd, SMU_CMD_RTC_COMMAND, 1, NULL, NULL,
+                              SMU_CMD_RTC_GET_DATETIME);
+        if (rc)
+                return rc;
+        smu_spinwait_simple(&cmd);
 
-        return rc;
+        time->tm_sec = bcd2hex(cmd.buffer[0]);
+        time->tm_min = bcd2hex(cmd.buffer[1]);
+        time->tm_hour = bcd2hex(cmd.buffer[2]);
+        time->tm_wday = bcd2hex(cmd.buffer[3]);
+        time->tm_mday = bcd2hex(cmd.buffer[4]);
+        time->tm_mon = bcd2hex(cmd.buffer[5]) - 1;
+        time->tm_year = bcd2hex(cmd.buffer[6]) + 100;
+
+        return 0;
 }
 
-int smu_set_rtc_time(struct rtc_time *time)
+
+int smu_set_rtc_time(struct rtc_time *time, int spinwait)
 {
-        unsigned long flags;
+        struct smu_simple_cmd cmd;
         int rc;
 
         if (smu == NULL)
                 return -ENODEV;
 
-        spin_lock_irqsave(&smu->lock, flags);
-        smu_fill_set_rtc_cmd(smu->cmd_buf, time);
-        rc = smu_do_cmd(smu);
-        spin_unlock_irqrestore(&smu->lock, flags);
+        rc = smu_queue_simple(&cmd, SMU_CMD_RTC_COMMAND, 8, NULL, NULL,
+                              SMU_CMD_RTC_SET_DATETIME,
+                              hex2bcd(time->tm_sec),
+                              hex2bcd(time->tm_min),
+                              hex2bcd(time->tm_hour),
+                              time->tm_wday,
+                              hex2bcd(time->tm_mday),
+                              hex2bcd(time->tm_mon) + 1,
+                              hex2bcd(time->tm_year - 100));
+        if (rc)
+                return rc;
+        smu_spinwait_simple(&cmd);
 
-        return rc;
+        return 0;
 }
 
+
 void smu_shutdown(void)
 {
-        const unsigned char *command = "SHUTDOWN";
-        unsigned long flags;
+        struct smu_simple_cmd cmd;
 
         if (smu == NULL)
                 return;
 
-        spin_lock_irqsave(&smu->lock, flags);
-        smu->cmd_buf->cmd = 0xaa;
-        smu->cmd_buf->length = strlen(command);
-        strcpy(smu->cmd_buf->data, command);
-        smu_do_cmd(smu);
+        if (smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 9, NULL, NULL,
+                             'S', 'H', 'U', 'T', 'D', 'O', 'W', 'N', 0))
+                return;
+        smu_spinwait_simple(&cmd);
         for (;;)
                 ;
-        spin_unlock_irqrestore(&smu->lock, flags);
 }
 
+
 void smu_restart(void)
 {
-        const unsigned char *command = "RESTART";
-        unsigned long flags;
+        struct smu_simple_cmd cmd;
 
         if (smu == NULL)
                 return;
 
-        spin_lock_irqsave(&smu->lock, flags);
-        smu->cmd_buf->cmd = 0xaa;
-        smu->cmd_buf->length = strlen(command);
-        strcpy(smu->cmd_buf->data, command);
-        smu_do_cmd(smu);
+        if (smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, NULL, NULL,
+                             'R', 'E', 'S', 'T', 'A', 'R', 'T', 0))
+                return;
+        smu_spinwait_simple(&cmd);
         for (;;)
                 ;
-        spin_unlock_irqrestore(&smu->lock, flags);
 }
 
+
 int smu_present(void)
 {
         return smu != NULL;
 }
+EXPORT_SYMBOL(smu_present);
 
 
 int smu_init (void)
@@ -307,6 +447,8 @@ int smu_init (void)
         if (np == NULL)
                 return -ENODEV;
 
+        printk(KERN_INFO "SMU driver %s %s\n", VERSION, AUTHOR);
+
         if (smu_cmdbuf_abs == 0) {
                 printk(KERN_ERR "SMU: Command buffer not allocated !\n");
                 return -EINVAL;
@@ -318,7 +460,13 @@ int smu_init (void)
         memset(smu, 0, sizeof(*smu));
 
         spin_lock_init(&smu->lock);
+        INIT_LIST_HEAD(&smu->cmd_list);
+        INIT_LIST_HEAD(&smu->cmd_i2c_list);
         smu->of_node = np;
+        smu->db_irq = NO_IRQ;
+        smu->msg_irq = NO_IRQ;
+        init_timer(&smu->i2c_timer);
+
         /* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
          * 32 bits value safely
          */
@@ -331,8 +479,8 @@ int smu_init (void)
                 goto fail;
         }
         data = (u32 *)get_property(np, "reg", NULL);
-        of_node_put(np);
         if (data == NULL) {
+                of_node_put(np);
                 printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
                 goto fail;
         }
@@ -341,8 +489,31 @@ int smu_init (void)
          * and ack. GPIOs are at 0x50, best would be to find that out
          * in the device-tree though.
          */
-        smu->db_req = 0x50 + *data;
-        smu->db_ack = 0x50 + *data;
+        smu->doorbell = *data;
+        if (smu->doorbell < 0x50)
+                smu->doorbell += 0x50;
+        if (np->n_intrs > 0)
+                smu->db_irq = np->intrs[0].line;
+
+        of_node_put(np);
+
+        /* Now look for the smu-interrupt GPIO */
+        do {
+                np = of_find_node_by_name(NULL, "smu-interrupt");
+                if (np == NULL)
+                        break;
+                data = (u32 *)get_property(np, "reg", NULL);
+                if (data == NULL) {
+                        of_node_put(np);
+                        break;
+                }
+                smu->msg = *data;
+                if (smu->msg < 0x50)
+                        smu->msg += 0x50;
+                if (np->n_intrs > 0)
+                        smu->msg_irq = np->intrs[0].line;
+                of_node_put(np);
+        } while(0);
 
         /* Doorbell buffer is currently hard-coded, I didn't find a proper
          * device-tree entry giving the address. Best would probably to use
@@ -362,3 +533,584 @@ int smu_init (void)
         return -ENXIO;
 
 }
+
+
+static int smu_late_init(void)
+{
+        if (!smu)
+                return 0;
+
+        /*
+         * Try to request the interrupts
+         */
+
+        if (smu->db_irq != NO_IRQ) {
+                if (request_irq(smu->db_irq, smu_db_intr,
+                                SA_SHIRQ, "SMU doorbell", smu) < 0) {
+                        printk(KERN_WARNING "SMU: can't "
+                               "request interrupt %d\n",
+                               smu->db_irq);
+                        smu->db_irq = NO_IRQ;
+                }
+        }
+
+        if (smu->msg_irq != NO_IRQ) {
+                if (request_irq(smu->msg_irq, smu_msg_intr,
+                                SA_SHIRQ, "SMU message", smu) < 0) {
+                        printk(KERN_WARNING "SMU: can't "
+                               "request interrupt %d\n",
+                               smu->msg_irq);
+                        smu->msg_irq = NO_IRQ;
+                }
+        }
+
+        return 0;
+}
+arch_initcall(smu_late_init);
+
+/*
+ * sysfs visibility
+ */
+
+static void smu_expose_childs(void *unused)
+{
+        struct device_node *np;
+
+        for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
+                if (device_is_compatible(np, "smu-i2c")) {
+                        char name[32];
+                        u32 *reg = (u32 *)get_property(np, "reg", NULL);
+
+                        if (reg == NULL)
+                                continue;
+                        sprintf(name, "smu-i2c-%02x", *reg);
+                        of_platform_device_create(np, name, &smu->of_dev->dev);
+                }
+        }
+
+}
+
+static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL);
+
+static int smu_platform_probe(struct of_device* dev,
+                              const struct of_device_id *match)
+{
+        if (!smu)
+                return -ENODEV;
+        smu->of_dev = dev;
+
+        /*
+         * Ok, we are matched, now expose all i2c busses. We have to defer
+         * that unfortunately or it would deadlock inside the device model
+         */
+        schedule_work(&smu_expose_childs_work);
+
+        return 0;
+}
+
+static struct of_device_id smu_platform_match[] =
+{
+        {
+                .type           = "smu",
+        },
+        {},
+};
+
+static struct of_platform_driver smu_of_platform_driver =
+{
+        .name           = "smu",
+        .match_table    = smu_platform_match,
+        .probe          = smu_platform_probe,
+};
+
+static int __init smu_init_sysfs(void)
+{
+        int rc;
+
+        /*
+         * Due to sysfs bogosity, a sysdev is not a real device, so
+         * we should in fact create both if we want sysdev semantics
+         * for power management.
+         * For now, we don't power manage machines with an SMU chip,
+         * I'm a bit too far from figuring out how that works with those
+         * new chipsets, but that will come back and bite us
+         */
+        rc = of_register_driver(&smu_of_platform_driver);
+        return 0;
+}
+
+device_initcall(smu_init_sysfs);
+
+struct of_device *smu_get_ofdev(void)
+{
+        if (!smu)
+                return NULL;
+        return smu->of_dev;
+}
+
+EXPORT_SYMBOL_GPL(smu_get_ofdev);
+
+/*
+ * i2c interface
+ */
+
+static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail)
+{
+        void (*done)(struct smu_i2c_cmd *cmd, void *misc) = cmd->done;
+        void *misc = cmd->misc;
+        unsigned long flags;
+
+        /* Check for read case */
+        if (!fail && cmd->read) {
+                if (cmd->pdata[0] < 1)
+                        fail = 1;
+                else
+                        memcpy(cmd->info.data, &cmd->pdata[1],
+                               cmd->info.datalen);
+        }
+
+        DPRINTK("SMU: completing, success: %d\n", !fail);
+
+        /* Update status and mark no pending i2c command with lock
+         * held so nobody comes in while we dequeue an eventual
+         * pending next i2c command
+         */
+        spin_lock_irqsave(&smu->lock, flags);
+        smu->cmd_i2c_cur = NULL;
+        wmb();
+        cmd->status = fail ? -EIO : 0;
+
+        /* Is there another i2c command waiting ? */
+        if (!list_empty(&smu->cmd_i2c_list)) {
+                struct smu_i2c_cmd *newcmd;
+
+                /* Fetch it, new current, remove from list */
+                newcmd = list_entry(smu->cmd_i2c_list.next,
+                                    struct smu_i2c_cmd, link);
+                smu->cmd_i2c_cur = newcmd;
+                list_del(&cmd->link);
+
+                /* Queue with low level smu */
+                list_add_tail(&cmd->scmd.link, &smu->cmd_list);
+                if (smu->cmd_cur == NULL)
+                        smu_start_cmd();
+        }
+        spin_unlock_irqrestore(&smu->lock, flags);
+
+        /* Call command completion handler if any */
+        if (done)
+                done(cmd, misc);
+
+}
+
+
+static void smu_i2c_retry(unsigned long data)
+{
+        struct smu_i2c_cmd      *cmd = (struct smu_i2c_cmd *)data;
+
+        DPRINTK("SMU: i2c failure, requeuing...\n");
+
+        /* requeue command simply by resetting reply_len */
+        cmd->pdata[0] = 0xff;
+        cmd->scmd.reply_len = 0x10;
+        smu_queue_cmd(&cmd->scmd);
+}
+
+
+static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
+{
+        struct smu_i2c_cmd      *cmd = misc;
+        int                     fail = 0;
+
+        DPRINTK("SMU: i2c compl. stage=%d status=%x pdata[0]=%x rlen: %x\n",
+                cmd->stage, scmd->status, cmd->pdata[0], scmd->reply_len);
+
+        /* Check for possible status */
+        if (scmd->status < 0)
+                fail = 1;
+        else if (cmd->read) {
+                if (cmd->stage == 0)
+                        fail = cmd->pdata[0] != 0;
+                else
+                        fail = cmd->pdata[0] >= 0x80;
+        } else {
+                fail = cmd->pdata[0] != 0;
+        }
+
+        /* Handle failures by requeuing command, after 5ms interval
+         */
+        if (fail && --cmd->retries > 0) {
+                DPRINTK("SMU: i2c failure, starting timer...\n");
+                smu->i2c_timer.function = smu_i2c_retry;
+                smu->i2c_timer.data = (unsigned long)cmd;
+                smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5);
+                add_timer(&smu->i2c_timer);
+                return;
+        }
+
+        /* If failure or stage 1, command is complete */
+        if (fail || cmd->stage != 0) {
+                smu_i2c_complete_command(cmd, fail);
+                return;
+        }
+
+        DPRINTK("SMU: going to stage 1\n");
+
+        /* Ok, initial command complete, now poll status */
+        scmd->reply_buf = cmd->pdata;
+        scmd->reply_len = 0x10;
+        scmd->data_buf = cmd->pdata;
+        scmd->data_len = 1;
+        cmd->pdata[0] = 0;
+        cmd->stage = 1;
+        cmd->retries = 20;
+        smu_queue_cmd(scmd);
+}
+
+
+int smu_queue_i2c(struct smu_i2c_cmd *cmd)
+{
+        unsigned long flags;
+
+        if (smu == NULL)
+                return -ENODEV;
+
+        /* Fill most fields of scmd */
+        cmd->scmd.cmd = SMU_CMD_I2C_COMMAND;
+        cmd->scmd.done = smu_i2c_low_completion;
+        cmd->scmd.misc = cmd;
+        cmd->scmd.reply_buf = cmd->pdata;
+        cmd->scmd.reply_len = 0x10;
+        cmd->scmd.data_buf = (u8 *)(char *)&cmd->info;
+        cmd->scmd.status = 1;
+        cmd->stage = 0;
+        cmd->pdata[0] = 0xff;
+        cmd->retries = 20;
+        cmd->status = 1;
+
+        /* Check transfer type, sanitize some "info" fields
+         * based on transfer type and do more checking
+         */
+        cmd->info.caddr = cmd->info.devaddr;
+        cmd->read = cmd->info.devaddr & 0x01;
+        switch(cmd->info.type) {
+        case SMU_I2C_TRANSFER_SIMPLE:
+                memset(&cmd->info.sublen, 0, 4);
+                break;
+        case SMU_I2C_TRANSFER_COMBINED:
+                cmd->info.devaddr &= 0xfe;
+        case SMU_I2C_TRANSFER_STDSUB:
+                if (cmd->info.sublen > 3)
+                        return -EINVAL;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        /* Finish setting up command based on transfer direction
+         */
+        if (cmd->read) {
+                if (cmd->info.datalen > SMU_I2C_READ_MAX)
+                        return -EINVAL;
+                memset(cmd->info.data, 0xff, cmd->info.datalen);
+                cmd->scmd.data_len = 9;
+        } else {
+                if (cmd->info.datalen > SMU_I2C_WRITE_MAX)
+                        return -EINVAL;
+                cmd->scmd.data_len = 9 + cmd->info.datalen;
+        }
+
+        DPRINTK("SMU: i2c enqueuing command\n");
+        DPRINTK("SMU:   %s, len=%d bus=%x addr=%x sub0=%x type=%x\n",
+                cmd->read ? "read" : "write", cmd->info.datalen,
+                cmd->info.bus, cmd->info.caddr,
+                cmd->info.subaddr[0], cmd->info.type);
+
+
+        /* Enqueue command in i2c list, and if empty, enqueue also in
+         * main command list
+         */
+        spin_lock_irqsave(&smu->lock, flags);
+        if (smu->cmd_i2c_cur == NULL) {
+                smu->cmd_i2c_cur = cmd;
+                list_add_tail(&cmd->scmd.link, &smu->cmd_list);
+                if (smu->cmd_cur == NULL)
+                        smu_start_cmd();
+        } else
+                list_add_tail(&cmd->link, &smu->cmd_i2c_list);
+        spin_unlock_irqrestore(&smu->lock, flags);
+
+        return 0;
+}
+
+
+
+/*
+ * Userland driver interface
+ */
+
+
+static LIST_HEAD(smu_clist);
+static DEFINE_SPINLOCK(smu_clist_lock);
+
+enum smu_file_mode {
+        smu_file_commands,
+        smu_file_events,
+        smu_file_closing
+};
+
+struct smu_private
+{
+        struct list_head        list;
+        enum smu_file_mode      mode;
+        int                     busy;
+        struct smu_cmd          cmd;
+        spinlock_t              lock;
+        wait_queue_head_t       wait;
+        u8                      buffer[SMU_MAX_DATA];
+};
+
+
+static int smu_open(struct inode *inode, struct file *file)
+{
+        struct smu_private *pp;
+        unsigned long flags;
+
+        pp = kmalloc(sizeof(struct smu_private), GFP_KERNEL);
+        if (pp == 0)
+                return -ENOMEM;
+        memset(pp, 0, sizeof(struct smu_private));
+        spin_lock_init(&pp->lock);
+        pp->mode = smu_file_commands;
+        init_waitqueue_head(&pp->wait);
+
+        spin_lock_irqsave(&smu_clist_lock, flags);
+        list_add(&pp->list, &smu_clist);
+        spin_unlock_irqrestore(&smu_clist_lock, flags);
+        file->private_data = pp;
+
+        return 0;
+}
+
+
+static void smu_user_cmd_done(struct smu_cmd *cmd, void *misc)
+{
+        struct smu_private *pp = misc;
+
+        wake_up_all(&pp->wait);
+}
+
+
+static ssize_t smu_write(struct file *file, const char __user *buf,
+                         size_t count, loff_t *ppos)
+{
+        struct smu_private *pp = file->private_data;
+        unsigned long flags;
+        struct smu_user_cmd_hdr hdr;
+        int rc = 0;
+
+        if (pp->busy)
+                return -EBUSY;
+        else if (copy_from_user(&hdr, buf, sizeof(hdr)))
+                return -EFAULT;
+        else if (hdr.cmdtype == SMU_CMDTYPE_WANTS_EVENTS) {
+                pp->mode = smu_file_events;
+                return 0;
+        } else if (hdr.cmdtype != SMU_CMDTYPE_SMU)
+                return -EINVAL;
+        else if (pp->mode != smu_file_commands)
+                return -EBADFD;
+        else if (hdr.data_len > SMU_MAX_DATA)
+                return -EINVAL;
+
+        spin_lock_irqsave(&pp->lock, flags);
+        if (pp->busy) {
+                spin_unlock_irqrestore(&pp->lock, flags);
+                return -EBUSY;
+        }
+        pp->busy = 1;
+        pp->cmd.status = 1;
+        spin_unlock_irqrestore(&pp->lock, flags);
+
+        if (copy_from_user(pp->buffer, buf + sizeof(hdr), hdr.data_len)) {
+                pp->busy = 0;
+                return -EFAULT;
+        }
+
+        pp->cmd.cmd = hdr.cmd;
+        pp->cmd.data_len = hdr.data_len;
+        pp->cmd.reply_len = SMU_MAX_DATA;
+        pp->cmd.data_buf = pp->buffer;
+        pp->cmd.reply_buf = pp->buffer;
+        pp->cmd.done = smu_user_cmd_done;
+        pp->cmd.misc = pp;
+        rc = smu_queue_cmd(&pp->cmd);
+        if (rc < 0)
+                return rc;
+        return count;
+}
+
+
+static ssize_t smu_read_command(struct file *file, struct smu_private *pp,
+                                char __user *buf, size_t count)
+{
+        DECLARE_WAITQUEUE(wait, current);
+        struct smu_user_reply_hdr hdr;
+        unsigned long flags;
+        int size, rc = 0;
+
+        if (!pp->busy)
+                return 0;
+        if (count < sizeof(struct smu_user_reply_hdr))
+                return -EOVERFLOW;
+        spin_lock_irqsave(&pp->lock, flags);
+        if (pp->cmd.status == 1) {
+                if (file->f_flags & O_NONBLOCK)
+                        return -EAGAIN;
+                add_wait_queue(&pp->wait, &wait);
+                for (;;) {
+                        set_current_state(TASK_INTERRUPTIBLE);
+                        rc = 0;
+                        if (pp->cmd.status != 1)
+                                break;
+                        rc = -ERESTARTSYS;
+                        if (signal_pending(current))
+                                break;
+                        spin_unlock_irqrestore(&pp->lock, flags);
+                        schedule();
+                        spin_lock_irqsave(&pp->lock, flags);
+                }
+                set_current_state(TASK_RUNNING);
+                remove_wait_queue(&pp->wait, &wait);
+        }
+        spin_unlock_irqrestore(&pp->lock, flags);
+        if (rc)
+                return rc;
+        if (pp->cmd.status != 0)
+                pp->cmd.reply_len = 0;
+        size = sizeof(hdr) + pp->cmd.reply_len;
+        if (count < size)
+                size = count;
+        rc = size;
+        hdr.status = pp->cmd.status;
+        hdr.reply_len = pp->cmd.reply_len;
+        if (copy_to_user(buf, &hdr, sizeof(hdr)))
+                return -EFAULT;
+        size -= sizeof(hdr);
+        if (size && copy_to_user(buf + sizeof(hdr), pp->buffer, size))
+                return -EFAULT;
+        pp->busy = 0;
+
+        return rc;
+}
+
+
+static ssize_t smu_read_events(struct file *file, struct smu_private *pp,
+                               char __user *buf, size_t count)
+{
+        /* Not implemented */
+        msleep_interruptible(1000);
+        return 0;
+}
+
+
+static ssize_t smu_read(struct file *file, char __user *buf,
+                        size_t count, loff_t *ppos)
+{
+        struct smu_private *pp = file->private_data;
+
+        if (pp->mode == smu_file_commands)
+                return smu_read_command(file, pp, buf, count);
+        if (pp->mode == smu_file_events)
+                return smu_read_events(file, pp, buf, count);
+
+        return -EBADFD;
+}
+
+static unsigned int smu_fpoll(struct file *file, poll_table *wait)
+{
+        struct smu_private *pp = file->private_data;
+        unsigned int mask = 0;
+        unsigned long flags;
+
+        if (pp == 0)
+                return 0;
+
+        if (pp->mode == smu_file_commands) {
+                poll_wait(file, &pp->wait, wait);
+
+                spin_lock_irqsave(&pp->lock, flags);
+                if (pp->busy && pp->cmd.status != 1)
+                        mask |= POLLIN;
+                spin_unlock_irqrestore(&pp->lock, flags);
+        } if (pp->mode == smu_file_events) {
+                /* Not yet implemented */
+        }
+        return mask;
+}
+
+static int smu_release(struct inode *inode, struct file *file)
+{
+        struct smu_private *pp = file->private_data;
+        unsigned long flags;
+        unsigned int busy;
+
+        if (pp == 0)
+                return 0;
+
+        file->private_data = NULL;
+
+        /* Mark file as closing to avoid races with new request */
+        spin_lock_irqsave(&pp->lock, flags);
+        pp->mode = smu_file_closing;
+        busy = pp->busy;
+
+        /* Wait for any pending request to complete */
+        if (busy && pp->cmd.status == 1) {
+                DECLARE_WAITQUEUE(wait, current);
+
+                add_wait_queue(&pp->wait, &wait);
+                for (;;) {
+                        set_current_state(TASK_UNINTERRUPTIBLE);
+                        if (pp->cmd.status != 1)
+                                break;
+                        spin_lock_irqsave(&pp->lock, flags);
+                        schedule();
+                        spin_unlock_irqrestore(&pp->lock, flags);
+                }
+                set_current_state(TASK_RUNNING);
+                remove_wait_queue(&pp->wait, &wait);
+        }
+        spin_unlock_irqrestore(&pp->lock, flags);
+
+        spin_lock_irqsave(&smu_clist_lock, flags);
+        list_del(&pp->list);
+        spin_unlock_irqrestore(&smu_clist_lock, flags);
+        kfree(pp);
+
+        return 0;
+}
+
+
+static struct file_operations smu_device_fops __pmacdata = {
+        .llseek         = no_llseek,
+        .read           = smu_read,
+        .write          = smu_write,
+        .poll           = smu_fpoll,
+        .open           = smu_open,
+        .release        = smu_release,
+};
+
+static struct miscdevice pmu_device __pmacdata = {
+        MISC_DYNAMIC_MINOR, "smu", &smu_device_fops
+};
+
+static int smu_device_init(void)
+{
+        if (!smu)
+                return -ENODEV;
+        if (misc_register(&pmu_device) < 0)
+                printk(KERN_ERR "via-pmu: cannot register misc device.\n");
+        return 0;
+}
+device_initcall(smu_device_init);
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index c9ca1118e449..f38696622eb4 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -599,7 +599,7 @@ thermostat_init(void)
                 sensor_location[2] = "?";
         }
 
-        of_dev = of_platform_device_create(np, "temperatures");
+        of_dev = of_platform_device_create(np, "temperatures", NULL);
         
         if (of_dev == NULL) {
                 printk(KERN_ERR "Can't register temperatures device !\n");
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 703e31973314..cc507ceef153 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -2051,7 +2051,7 @@ static int __init therm_pm72_init(void)
                             return -ENODEV;
                 }
         }
-        of_dev = of_platform_device_create(np, "temperature");
+        of_dev = of_platform_device_create(np, "temperature", NULL);
         if (of_dev == NULL) {
                 printk(KERN_ERR "Can't register FCU platform device !\n");
                 return -ENODEV;
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index cbb72eb0426d..6aaa1df1a64e 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -504,7 +504,7 @@ g4fan_init( void )
         }
         if( !(np=of_find_node_by_name(NULL, "fan")) )
                 return -ENODEV;
-        x.of_dev = of_platform_device_create( np, "temperature" );
+        x.of_dev = of_platform_device_create(np, "temperature", NULL);
         of_node_put( np );
 
         if( !x.of_dev ) {
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index a564321db2f0..c062a017491e 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -763,21 +763,21 @@ static void set_pll(struct bttv *btv)
                 /* no PLL needed */
                 if (btv->pll.pll_current == 0)
                         return;
-                vprintk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
-                        btv->c.nr,btv->pll.pll_ifreq);
+                bttv_printk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
+                           btv->c.nr,btv->pll.pll_ifreq);
                 btwrite(0x00,BT848_TGCTRL);
                 btwrite(0x00,BT848_PLL_XCI);
                 btv->pll.pll_current = 0;
                 return;
         }
 
-        vprintk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->c.nr,
-                btv->pll.pll_ifreq, btv->pll.pll_ofreq);
+        bttv_printk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->c.nr,
+                   btv->pll.pll_ifreq, btv->pll.pll_ofreq);
         set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq);
 
         for (i=0; i<10; i++) {
                 /*  Let other people run while the PLL stabilizes */
-                vprintk(".");
+                bttv_printk(".");
                 msleep(10);
 
                 if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) {
@@ -785,12 +785,12 @@ static void set_pll(struct bttv *btv)
                 } else {
                         btwrite(0x08,BT848_TGCTRL);
                         btv->pll.pll_current = btv->pll.pll_ofreq;
-                        vprintk(" ok\n");
+                        bttv_printk(" ok\n");
                         return;
                 }
         }
         btv->pll.pll_current = -1;
-        vprintk("failed\n");
+        bttv_printk("failed\n");
         return;
 }
 
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index 9b0b7ca035f8..7a312f79340a 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -221,7 +221,7 @@ extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
 extern int init_bttv_i2c(struct bttv *btv);
 extern int fini_bttv_i2c(struct bttv *btv);
 
-#define vprintk  if (bttv_verbose) printk
+#define bttv_printk if (bttv_verbose) printk
 #define dprintk  if (bttv_debug >= 1) printk
 #define d2printk if (bttv_debug >= 2) printk
 
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index a851d65c7cfe..a260f83bcb02 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -48,8 +48,8 @@ struct ucb1x00_ts {
         u16                     x_res;
         u16                     y_res;
 
-        int                     restart:1;
-        int                     adcsync:1;
+        unsigned int            restart:1;
+        unsigned int            adcsync:1;
 };
 
 static int adcsync;
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index 9a087c1fb0b7..24f670b5a4f3 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -40,7 +40,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/doc2000.h>
 
-#define DEBUG 0
+#define DEBUG_ECC 0
 /* need to undef it (from asm/termbits.h) */
 #undef B0
 
@@ -249,7 +249,7 @@ eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
           lambda[j] ^= Alpha_to[modnn(u + tmp)];
       }
     }
-#if DEBUG >= 1
+#if DEBUG_ECC >= 1
     /* Test code that verifies the erasure locator polynomial just constructed
        Needed only for decoder debugging. */
     
@@ -276,7 +276,7 @@ eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
       count = -1;
       goto finish;
     }
-#if DEBUG >= 2
+#if DEBUG_ECC >= 2
     printf("\n Erasure positions as determined by roots of Eras Loc Poly:\n");
     for (i = 0; i < count; i++)
       printf("%d ", loc[i]);
@@ -409,7 +409,7 @@ eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
         den ^= Alpha_to[modnn(lambda[i+1] + i * root[j])];
     }
     if (den == 0) {
-#if DEBUG >= 1
+#if DEBUG_ECC >= 1
       printf("\n ERROR: denominator = 0\n");
 #endif
       /* Convert to dual- basis */
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index 6d76f3a99b17..f87027420081 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -1094,7 +1094,7 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
    
         outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD);
     
-        if (inb_p(e8390_base) & E8390_TRANS) 
+        if (inb_p(e8390_base + E8390_CMD) & E8390_TRANS) 
         {
                 printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n",
                         dev->name);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 90449a0f2a6c..6d00c3de1a83 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1653,7 +1653,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
         int old_features = bond_dev->features;
         int res = 0;
 
-        if (slave_dev->do_ioctl == NULL) {
+        if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
+                slave_dev->do_ioctl == NULL) {
                 printk(KERN_WARNING DRV_NAME
                        ": Warning : no link monitoring support for %s\n",
                        slave_dev->name);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index f0471d102e3c..f9223c1c5aa4 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -100,11 +100,11 @@ VERSION 2.2LK	<2005/01/25>
 
 #ifdef CONFIG_R8169_NAPI
 #define rtl8169_rx_skb                  netif_receive_skb
-#define rtl8169_rx_hwaccel_skb          vlan_hwaccel_rx
+#define rtl8169_rx_hwaccel_skb          vlan_hwaccel_receive_skb
 #define rtl8169_rx_quota(count, quota)  min(count, quota)
 #else
 #define rtl8169_rx_skb                  netif_rx
-#define rtl8169_rx_hwaccel_skb          vlan_hwaccel_receive_skb
+#define rtl8169_rx_hwaccel_skb          vlan_hwaccel_rx
 #define rtl8169_rx_quota(count, quota)  count
 #endif
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 0208258e7826..fd398da4993b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME                "skge"
-#define DRV_VERSION             "1.0"
+#define DRV_VERSION             "1.1"
 #define PFX                     DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE    128
@@ -105,41 +105,28 @@ static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
 static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
 static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 };
 
-/* Don't need to look at whole 16K.
- * last interesting register is descriptor poll timer.
- */
-#define SKGE_REGS_LEN   (29*128)
-
 static int skge_get_regs_len(struct net_device *dev)
 {
-        return SKGE_REGS_LEN;
+        return 0x4000;
 }
 
 /*
- * Returns copy of control register region
- * I/O region is divided into banks and certain regions are unreadable
+ * Returns copy of whole control register region
+ * Note: skip RAM address register because accessing it will
+ *       cause bus hangs!
  */
 static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
                           void *p)
 {
         const struct skge_port *skge = netdev_priv(dev);
-        unsigned long offs;
         const void __iomem *io = skge->hw->regs;
-        static const unsigned long bankmap
-                = (1<<0) | (1<<2) | (1<<8) | (1<<9)
-                  | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16)
-                  | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23)
-                  | (1<<24)  | (1<<25) | (1<<26) | (1<<27) | (1<<28);
 
         regs->version = 1;
-        for (offs = 0; offs < regs->len; offs += 128) {
-                u32 len = min_t(u32, 128, regs->len - offs);
+        memset(p, 0, regs->len);
+        memcpy_fromio(p, io, B3_RAM_ADDR);
 
-                if (bankmap & (1<<(offs/128)))
-                        memcpy_fromio(p + offs, io + offs, len);
-                else
-                        memset(p + offs, 0, len);
-        }
+        memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
+                      regs->len - B3_RI_WTO_R1);
 }
 
 /* Wake on Lan only supported on Yukon chps with rev 1 or above */
@@ -775,17 +762,6 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base)
         return 0;
 }
 
-static struct sk_buff *skge_rx_alloc(struct net_device *dev, unsigned int size)
-{
-        struct sk_buff *skb = dev_alloc_skb(size);
-
-        if (likely(skb)) {
-                skb->dev = dev;
-                skb_reserve(skb, NET_IP_ALIGN);
-        }
-        return skb;
-}
-
 /* Allocate and setup a new buffer for receiving */
 static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
                           struct sk_buff *skb, unsigned int bufsize)
@@ -858,16 +834,17 @@ static int skge_rx_fill(struct skge_port *skge)
 {
         struct skge_ring *ring = &skge->rx_ring;
         struct skge_element *e;
-        unsigned int bufsize = skge->rx_buf_size;
 
         e = ring->start;
         do {
-                struct sk_buff *skb = skge_rx_alloc(skge->netdev, bufsize);
+                struct sk_buff *skb;
 
+                skb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
                 if (!skb)
                         return -ENOMEM;
 
-                skge_rx_setup(skge, e, skb, bufsize);
+                skb_reserve(skb, NET_IP_ALIGN);
+                skge_rx_setup(skge, e, skb, skge->rx_buf_size);
         } while ( (e = e->next) != ring->start);
 
         ring->to_clean = ring->start;
@@ -1666,6 +1643,22 @@ static void yukon_reset(struct skge_hw *hw, int port)
                          | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
 }
 
+/* Apparently, early versions of Yukon-Lite had wrong chip_id? */
+static int is_yukon_lite_a0(struct skge_hw *hw)
+{
+        u32 reg;
+        int ret;
+
+        if (hw->chip_id != CHIP_ID_YUKON)
+                return 0;
+
+        reg = skge_read32(hw, B2_FAR);
+        skge_write8(hw, B2_FAR + 3, 0xff);
+        ret = (skge_read8(hw, B2_FAR + 3) != 0);
+        skge_write32(hw, B2_FAR, reg);
+        return ret;
+}
+
 static void yukon_mac_init(struct skge_hw *hw, int port)
 {
         struct skge_port *skge = netdev_priv(hw->dev[port]);
@@ -1781,9 +1774,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
         /* Configure Rx MAC FIFO */
         skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
         reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
-        if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-            hw->chip_rev >= CHIP_REV_YU_LITE_A3)
+
+        /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */
+        if (is_yukon_lite_a0(hw))
                 reg &= ~GMF_RX_F_FL_ON;
+
         skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
         skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
         /*
@@ -2442,6 +2437,14 @@ static void yukon_set_multicast(struct net_device *dev)
         gma_write16(hw, port, GM_RX_CTRL, reg);
 }
 
+static inline u16 phy_length(const struct skge_hw *hw, u32 status)
+{
+        if (hw->chip_id == CHIP_ID_GENESIS)
+                return status >> XMR_FS_LEN_SHIFT;
+        else
+                return status >> GMR_FS_LEN_SHIFT;
+}
+
 static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
 {
         if (hw->chip_id == CHIP_ID_GENESIS)
@@ -2451,80 +2454,99 @@ static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
                         (status & GMR_FS_RX_OK) == 0;
 }
 
-static void skge_rx_error(struct skge_port *skge, int slot,
-                          u32 control, u32 status)
-{
-        if (netif_msg_rx_err(skge))
-                printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n",
-                       skge->netdev->name, slot, control, status);
-
-        if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
-                skge->net_stats.rx_length_errors++;
-        else if (skge->hw->chip_id == CHIP_ID_GENESIS) {
-                if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
-                        skge->net_stats.rx_length_errors++;
-                if (status & XMR_FS_FRA_ERR)
-                        skge->net_stats.rx_frame_errors++;
-                if (status & XMR_FS_FCS_ERR)
-                        skge->net_stats.rx_crc_errors++;
-        } else {
-                if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
-                        skge->net_stats.rx_length_errors++;
-                if (status & GMR_FS_FRAGMENT)
-                        skge->net_stats.rx_frame_errors++;
-                if (status & GMR_FS_CRC_ERR)
-                        skge->net_stats.rx_crc_errors++;
-        }
-}
 
 /* Get receive buffer from descriptor.
  * Handles copy of small buffers and reallocation failures
  */
 static inline struct sk_buff *skge_rx_get(struct skge_port *skge,
                                           struct skge_element *e,
-                                          unsigned int len)
+                                          u32 control, u32 status, u16 csum)
 {
-        struct sk_buff *nskb, *skb;
+        struct sk_buff *skb;
+        u16 len = control & BMU_BBC;
+
+        if (unlikely(netif_msg_rx_status(skge)))
+                printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
+                       skge->netdev->name, e - skge->rx_ring.start,
+                       status, len);
+
+        if (len > skge->rx_buf_size)
+                goto error;
+
+        if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
+                goto error;
+
+        if (bad_phy_status(skge->hw, status))
+                goto error;
+
+        if (phy_length(skge->hw, status) != len)
+                goto error;
 
         if (len < RX_COPY_THRESHOLD) {
-                nskb = skge_rx_alloc(skge->netdev, len + NET_IP_ALIGN);
-                if (unlikely(!nskb))
-                        return NULL;
+                skb = dev_alloc_skb(len + 2);
+                if (!skb)
+                        goto resubmit;
 
+                skb_reserve(skb, 2);
                 pci_dma_sync_single_for_cpu(skge->hw->pdev,
                                             pci_unmap_addr(e, mapaddr),
                                             len, PCI_DMA_FROMDEVICE);
-                memcpy(nskb->data, e->skb->data, len);
+                memcpy(skb->data, e->skb->data, len);
                 pci_dma_sync_single_for_device(skge->hw->pdev,
                                                pci_unmap_addr(e, mapaddr),
                                                len, PCI_DMA_FROMDEVICE);
-
-                if (skge->rx_csum) {
-                        struct skge_rx_desc *rd = e->desc;
-                        nskb->csum = le16_to_cpu(rd->csum2);
-                        nskb->ip_summed = CHECKSUM_HW;
-                }
                 skge_rx_reuse(e, skge->rx_buf_size);
-                return nskb;
         } else {
-                nskb = skge_rx_alloc(skge->netdev, skge->rx_buf_size);
-                if (unlikely(!nskb))
-                        return NULL;
+                struct sk_buff *nskb;
+                nskb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
+                if (!nskb)
+                        goto resubmit;
 
                 pci_unmap_single(skge->hw->pdev,
                                  pci_unmap_addr(e, mapaddr),
                                  pci_unmap_len(e, maplen),
                                  PCI_DMA_FROMDEVICE);
                 skb = e->skb;
-                if (skge->rx_csum) {
-                        struct skge_rx_desc *rd = e->desc;
-                        skb->csum = le16_to_cpu(rd->csum2);
-                        skb->ip_summed = CHECKSUM_HW;
-                }
-
+                prefetch(skb->data);
                 skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
-                return skb;
         }
+
+        skb_put(skb, len);
+        skb->dev = skge->netdev;
+        if (skge->rx_csum) {
+                skb->csum = csum;
+                skb->ip_summed = CHECKSUM_HW;
+        }
+
+        skb->protocol = eth_type_trans(skb, skge->netdev);
+
+        return skb;
+error:
+
+        if (netif_msg_rx_err(skge))
+                printk(KERN_DEBUG PFX "%s: rx err, slot %td control 0x%x status 0x%x\n",
+                       skge->netdev->name, e - skge->rx_ring.start,
+                       control, status);
+
+        if (skge->hw->chip_id == CHIP_ID_GENESIS) {
+                if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
+                        skge->net_stats.rx_length_errors++;
+                if (status & XMR_FS_FRA_ERR)
+                        skge->net_stats.rx_frame_errors++;
+                if (status & XMR_FS_FCS_ERR)
+                        skge->net_stats.rx_crc_errors++;
+        } else {
+                if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
+                        skge->net_stats.rx_length_errors++;
+                if (status & GMR_FS_FRAGMENT)
+                        skge->net_stats.rx_frame_errors++;
+                if (status & GMR_FS_CRC_ERR)
+                        skge->net_stats.rx_crc_errors++;
+        }
+
+resubmit:
+        skge_rx_reuse(e, skge->rx_buf_size);
+        return NULL;
 }
 
 
@@ -2540,32 +2562,16 @@ static int skge_poll(struct net_device *dev, int *budget)
         for (e = ring->to_clean; work_done < to_do; e = e->next) {
                 struct skge_rx_desc *rd = e->desc;
                 struct sk_buff *skb;
-                u32 control, len, status;
+                u32 control;
 
                 rmb();
                 control = rd->control;
                 if (control & BMU_OWN)
                         break;
 
-                len = control & BMU_BBC;
-                status = rd->status;
-
-                if (unlikely((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
-                             || bad_phy_status(hw, status))) {
-                        skge_rx_error(skge, e - ring->start, control, status);
-                        skge_rx_reuse(e, skge->rx_buf_size);
-                        continue;
-                }
-
-                if (netif_msg_rx_status(skge))
-                    printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
-                           dev->name, e - ring->start, rd->status, len);
-
-                skb = skge_rx_get(skge, e, len);
+                skb = skge_rx_get(skge, e, control, rd->status,
+                                  le16_to_cpu(rd->csum2));
                 if (likely(skb)) {
-                        skb_put(skb, len);
-                        skb->protocol = eth_type_trans(skb, dev);
-
                         dev->last_rx = jiffies;
                         netif_receive_skb(skb);
 
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index efbf98c675d2..72c175b87a5a 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -953,6 +953,7 @@ enum {
  */
 enum {
         XMR_FS_LEN      = 0x3fff<<18,   /* Bit 31..18:  Rx Frame Length */
+        XMR_FS_LEN_SHIFT = 18,
         XMR_FS_2L_VLAN  = 1<<17, /* Bit 17:     tagged wh 2Lev VLAN ID*/
         XMR_FS_1_VLAN   = 1<<16, /* Bit 16:     tagged wh 1ev VLAN ID*/
         XMR_FS_BC       = 1<<15, /* Bit 15:     Broadcast Frame */
@@ -1868,6 +1869,7 @@ enum {
 /* Receive Frame Status Encoding */
 enum {
         GMR_FS_LEN      = 0xffff<<16, /* Bit 31..16:    Rx Frame Length */
+        GMR_FS_LEN_SHIFT = 16,
         GMR_FS_VLAN     = 1<<13, /* Bit 13:     VLAN Packet */
         GMR_FS_JABBER   = 1<<12, /* Bit 12:     Jabber Packet */
         GMR_FS_UN_SIZE  = 1<<11, /* Bit 11:     Undersize Packet */
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 10444988a10b..e1743be31909 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -7,7 +7,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
                  char *buffer, int buffer_size)
 {
         struct pci_dev *pdev;
-        char *scratch;
         int i = 0;
         int length = 0;
 
@@ -18,9 +17,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
         if (!pdev)
                 return -ENODEV;
 
-        scratch = buffer;
-
-
         if (add_hotplug_env_var(envp, num_envp, &i,
                                 buffer, buffer_size, &length,
                                 "PCI_CLASS=%04X", pdev->class))
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index 752e6513c447..db69be85b458 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -62,7 +62,7 @@ static ssize_t add_slot_store(struct dlpar_io_attr *dlpar_attr,
         char drc_name[MAX_DRC_NAME_LEN];
         char *end;
 
-        if (nbytes > MAX_DRC_NAME_LEN)
+        if (nbytes >= MAX_DRC_NAME_LEN)
                 return 0;
 
         memcpy(drc_name, buf, nbytes);
@@ -83,7 +83,7 @@ static ssize_t remove_slot_store(struct dlpar_io_attr *dlpar_attr,
         char drc_name[MAX_DRC_NAME_LEN];
         char *end;
 
-        if (nbytes > MAX_DRC_NAME_LEN)
+        if (nbytes >= MAX_DRC_NAME_LEN)
                 return 0;
 
         memcpy(drc_name, buf, nbytes);
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index b1409441c1cd..a32ae82e5922 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -159,7 +159,7 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
 
         pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
 
-        slot = kcalloc(1, sizeof(*slot), GFP_KERNEL);
+        slot = kzalloc(sizeof(*slot), GFP_KERNEL);
         if (!slot)
                 return -ENOMEM;
         bss_hotplug_slot->private = slot;
@@ -491,7 +491,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
                 if (sn_pci_slot_valid(pci_bus, device) != 1)
                         continue;
 
-                bss_hotplug_slot = kcalloc(1, sizeof(*bss_hotplug_slot),
+                bss_hotplug_slot = kzalloc(sizeof(*bss_hotplug_slot),
                                            GFP_KERNEL);
                 if (!bss_hotplug_slot) {
                         rc = -ENOMEM;
@@ -499,7 +499,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
                 }
 
                 bss_hotplug_slot->info =
-                        kcalloc(1, sizeof(struct hotplug_slot_info),
+                        kzalloc(sizeof(struct hotplug_slot_info),
                                 GFP_KERNEL);
                 if (!bss_hotplug_slot->info) {
                         rc = -ENOMEM;
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 56a3b397efee..2898830c496f 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -360,7 +360,7 @@ pci_create_resource_files(struct pci_dev *pdev)
                         continue;
 
                 /* allocate attribute structure, piggyback attribute name */
-                res_attr = kcalloc(1, sizeof(*res_attr) + 10, GFP_ATOMIC);
+                res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
                 if (res_attr) {
                         char *res_attr_name = (char *)(res_attr + 1);
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 26a55d08b506..005786416bb5 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -165,7 +165,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
                 if (l == 0xffffffff)
                         l = 0;
                 if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
-                        sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK);
+                        sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
                         if (!sz)
                                 continue;
                         res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
@@ -215,7 +215,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
                 if (l == 0xffffffff)
                         l = 0;
                 if (sz && sz != 0xffffffff) {
-                        sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);
+                        sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
                         if (sz) {
                                 res->flags = (l & IORESOURCE_ROM_ENABLE) |
                                   IORESOURCE_MEM | IORESOURCE_PREFETCH |
@@ -402,6 +402,12 @@ static void pci_enable_crs(struct pci_dev *dev)
 static void __devinit pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
 {
         struct pci_bus *parent = child->parent;
+
+        /* Attempts to fix that up are really dangerous unless
+           we're going to re-assign all bus numbers. */
+        if (!pcibios_assign_all_busses())
+                return;
+
         while (parent->parent && parent->subordinate < max) {
                 parent->subordinate = max;
                 pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
@@ -478,8 +484,18 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max
                  * We need to assign a number to this bus which we always
                  * do in the second pass.
                  */
-                if (!pass)
+                if (!pass) {
+                        if (pcibios_assign_all_busses())
+                                /* Temporarily disable forwarding of the
+                                   configuration cycles on all bridges in
+                                   this bus segment to avoid possible
+                                   conflicts in the second pass between two
+                                   bridges programmed with overlapping
+                                   bus ranges. */
+                                pci_write_config_dword(dev, PCI_PRIMARY_BUS,
+                                                       buses & ~0xffffff);
                         return max;
+                }
 
                 /* Clear errors */
                 pci_write_config_word(dev, PCI_STATUS, 0xffff);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 91ea8e4777f3..dbb3eb0e330b 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -437,7 +437,7 @@ __ccwgroup_get_gdev_by_cdev(struct ccw_device *cdev)
         if (cdev->dev.driver_data) {
                 gdev = (struct ccwgroup_device *)cdev->dev.driver_data;
                 if (get_device(&gdev->dev)) {
-                        if (klist_node_attached(&gdev->dev.knode_bus))
+                        if (device_is_registered(&gdev->dev))
                                 return gdev;
                         put_device(&gdev->dev);
                 }
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 87e0c36f1554..d71cef767cec 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -442,7 +442,6 @@ static void piix_sata_phy_reset(struct ata_port *ap)
  *      piix_set_piomode - Initialize host controller PATA PIO timings
  *      @ap: Port whose timings we are configuring
  *      @adev: um
- *      @pio: PIO mode, 0 - 4
  *
  *      Set PIO mode for device, in host controller PCI config space.
  *
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d92273cbe0de..e5b01997117a 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4132,6 +4132,53 @@ err_out:
 }
 
 /**
+ *      ata_host_set_remove - PCI layer callback for device removal
+ *      @host_set: ATA host set that was removed
+ *
+ *      Unregister all objects associated with this host set. Free those 
+ *      objects.
+ *
+ *      LOCKING:
+ *      Inherited from calling layer (may sleep).
+ */
+
+
+void ata_host_set_remove(struct ata_host_set *host_set)
+{
+        struct ata_port *ap;
+        unsigned int i;
+
+        for (i = 0; i < host_set->n_ports; i++) {
+                ap = host_set->ports[i];
+                scsi_remove_host(ap->host);
+        }
+
+        free_irq(host_set->irq, host_set);
+
+        for (i = 0; i < host_set->n_ports; i++) {
+                ap = host_set->ports[i];
+
+                ata_scsi_release(ap->host);
+
+                if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
+                        struct ata_ioports *ioaddr = &ap->ioaddr;
+
+                        if (ioaddr->cmd_addr == 0x1f0)
+                                release_region(0x1f0, 8);
+                        else if (ioaddr->cmd_addr == 0x170)
+                                release_region(0x170, 8);
+                }
+
+                scsi_host_put(ap->host);
+        }
+
+        if (host_set->ops->host_stop)
+                host_set->ops->host_stop(host_set);
+
+        kfree(host_set);
+}
+
+/**
  *      ata_scsi_release - SCSI layer callback hook for host unload
  *      @host: libata host to be unloaded
  *
@@ -4471,39 +4518,8 @@ void ata_pci_remove_one (struct pci_dev *pdev)
 {
         struct device *dev = pci_dev_to_dev(pdev);
         struct ata_host_set *host_set = dev_get_drvdata(dev);
-        struct ata_port *ap;
-        unsigned int i;
-
-        for (i = 0; i < host_set->n_ports; i++) {
-                ap = host_set->ports[i];
-
-                scsi_remove_host(ap->host);
-        }
-
-        free_irq(host_set->irq, host_set);
-
-        for (i = 0; i < host_set->n_ports; i++) {
-                ap = host_set->ports[i];
-
-                ata_scsi_release(ap->host);
-
-                if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
-                        struct ata_ioports *ioaddr = &ap->ioaddr;
-
-                        if (ioaddr->cmd_addr == 0x1f0)
-                                release_region(0x1f0, 8);
-                        else if (ioaddr->cmd_addr == 0x170)
-                                release_region(0x170, 8);
-                }
-
-                scsi_host_put(ap->host);
-        }
-
-        if (host_set->ops->host_stop)
-                host_set->ops->host_stop(host_set);
-
-        kfree(host_set);
 
+        ata_host_set_remove(host_set);
         pci_release_regions(pdev);
         pci_disable_device(pdev);
         dev_set_drvdata(dev, NULL);
@@ -4573,6 +4589,7 @@ module_exit(ata_exit);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_device_add);
+EXPORT_SYMBOL_GPL(ata_host_set_remove);
 EXPORT_SYMBOL_GPL(ata_sg_init);
 EXPORT_SYMBOL_GPL(ata_sg_init_one);
 EXPORT_SYMBOL_GPL(ata_qc_complete);
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index a4857db4f9b8..b235556b7b65 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1959,22 +1959,35 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match)
         /* Set it up */
         mesh_init(ms);
 
-        /* XXX FIXME: error should be fatal */
-        if (request_irq(ms->meshintr, do_mesh_interrupt, 0, "MESH", ms))
+        /* Request interrupt */
+        if (request_irq(ms->meshintr, do_mesh_interrupt, 0, "MESH", ms)) {
                 printk(KERN_ERR "MESH: can't get irq %d\n", ms->meshintr);
+                goto out_shutdown;
+        }
 
-        /* XXX FIXME: handle failure */
-        scsi_add_host(mesh_host, &mdev->ofdev.dev);
+        /* Add scsi host & scan */
+        if (scsi_add_host(mesh_host, &mdev->ofdev.dev))
+                goto out_release_irq;
         scsi_scan_host(mesh_host);
 
         return 0;
 
-out_unmap:
+ out_release_irq:
+        free_irq(ms->meshintr, ms);
+ out_shutdown:
+        /* shutdown & reset bus in case of error or macos can be confused
+         * at reboot if the bus was set to synchronous mode already
+         */
+        mesh_shutdown(mdev);
+        set_mesh_power(ms, 0);
+        pci_free_consistent(macio_get_pci_dev(mdev), ms->dma_cmd_size,
+                            ms->dma_cmd_space, ms->dma_cmd_bus);
+ out_unmap:
         iounmap(ms->dma);
         iounmap(ms->mesh);
-out_free:
+ out_free:
         scsi_host_put(mesh_host);
-out_release:
+ out_release:
         macio_release_resources(mdev);
 
         return -ENODEV;
@@ -2001,7 +2014,7 @@ static int mesh_remove(struct macio_dev *mdev)
 
         /* Free DMA commands memory */
         pci_free_consistent(macio_get_pci_dev(mdev), ms->dma_cmd_size,
-                          ms->dma_cmd_space, ms->dma_cmd_bus);
+                            ms->dma_cmd_space, ms->dma_cmd_bus);
 
         /* Release memory resources */
         macio_release_resources(mdev);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index a1d62dee3be6..c05653c7779d 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -158,6 +158,8 @@ static struct pci_device_id nv_pci_tbl[] = {
                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 },
         { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA,
                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 },
+        { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2,
+                PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 },
         { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
                 PCI_ANY_ID, PCI_ANY_ID,
                 PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 78c1f36ad9b7..87ef368384fb 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -98,7 +98,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
 {
         struct uart_port *port = dev_id;
         struct tty_struct *tty = port->info->tty;
-        unsigned int status, ch, flg, ignored = 0;
+        unsigned int status, ch, flg;
 
         status = clps_readl(SYSFLG(port));
         while (!(status & SYSFLG_URXFE)) {
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index c47c8052b486..f1fb67fe22a8 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -987,7 +987,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 
                         /* remove this interface if it has been registered */
                         interface = dev->actconfig->interface[i];
-                        if (!klist_node_attached(&interface->dev.knode_bus))
+                        if (!device_is_registered(&interface->dev))
                                 continue;
                         dev_dbg (&dev->dev, "unregistering interface %s\n",
                                 interface->dev.bus_id);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 087af73a59dd..7d131509e419 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -303,7 +303,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
         /* if interface was already added, bind now; else let
          * the future device_add() bind it, bypassing probe()
          */
-        if (klist_node_attached(&dev->knode_bus))
+        if (device_is_registered(dev))
                 device_bind_driver(dev);
 
         return 0;
@@ -336,8 +336,8 @@ void usb_driver_release_interface(struct usb_driver *driver,
         if (iface->condition != USB_INTERFACE_BOUND)
                 return;
 
-        /* release only after device_add() */
-        if (klist_node_attached(&dev->knode_bus)) {
+        /* don't release if the interface hasn't been added yet */
+        if (device_is_registered(dev)) {
                 iface->condition = USB_INTERFACE_UNBINDING;
                 device_release_driver(dev);
         }
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 1507738337c4..73f8c9404156 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -422,7 +422,7 @@ static inline void ep0_idle (struct pxa2xx_udc *dev)
 }
 
 static int
-write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max)
 {
         u8              *buf;
         unsigned        length, count;
@@ -2602,7 +2602,7 @@ static int __exit pxa2xx_udc_remove(struct device *_dev)
  * VBUS IRQs should probably be ignored so that the PXA device just acts
  * "dead" to USB hosts until system resume.
  */
-static int pxa2xx_udc_suspend(struct device *dev, u32 state, u32 level)
+static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level)
 {
         struct pxa2xx_udc       *udc = dev_get_drvdata(dev);
 
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index d0bc396a85d5..a58f3e6e71f1 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -69,11 +69,11 @@ struct pxa2xx_ep {
          * UDDR = UDC Endpoint Data Register (the fifo)
          * DRCM = DMA Request Channel Map
          */
-        volatile u32                            *reg_udccs;
-        volatile u32                            *reg_ubcr;
-        volatile u32                            *reg_uddr;
+        volatile unsigned long                  *reg_udccs;
+        volatile unsigned long                  *reg_ubcr;
+        volatile unsigned long                  *reg_uddr;
 #ifdef USE_DMA
-        volatile u32                            *reg_drcmr;
+        volatile unsigned long                  *reg_drcmr;
 #define drcmr(n)  .reg_drcmr = & DRCMR ## n ,
 #else
 #define drcmr(n)  
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index d2a1fd40dfcb..d42a15d10a46 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -782,6 +782,9 @@ retry:
 /* usb 1.1 says max 90% of a frame is available for periodic transfers.
  * this driver doesn't promise that much since it's got to handle an
  * IRQ per packet; irq handling latencies also use up that time.
+ *
+ * NOTE:  the periodic schedule is a sparse tree, with the load for
+ * each branch minimized.  see fig 3.5 in the OHCI spec for example.
  */
 #define MAX_PERIODIC_LOAD       500     /* out of 1000 usec */
 
@@ -843,6 +846,7 @@ static int sl811h_urb_enqueue(
         if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
                         || !HC_IS_RUNNING(hcd->state)) {
                 retval = -ENODEV;
+                kfree(ep);
                 goto fail;
         }
 
@@ -911,8 +915,16 @@ static int sl811h_urb_enqueue(
         case PIPE_ISOCHRONOUS:
         case PIPE_INTERRUPT:
                 urb->interval = ep->period;
-                if (ep->branch < PERIODIC_SIZE)
+                if (ep->branch < PERIODIC_SIZE) {
+                        /* NOTE:  the phase is correct here, but the value
+                         * needs offsetting by the transfer queue depth.
+                         * All current drivers ignore start_frame, so this
+                         * is unlikely to ever matter...
+                         */
+                        urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+                                                + ep->branch;
                         break;
+                }
 
                 retval = balance(sl811, ep->period, ep->load);
                 if (retval < 0)
@@ -1122,7 +1134,7 @@ sl811h_hub_descriptor (
         desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
 
         /* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
-        desc->bitmap[0] = 1 << 1;
+        desc->bitmap[0] = 0 << 1;
         desc->bitmap[1] = ~0;
 }
 
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 7484d34780fc..6a4ffe6c3977 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -648,6 +648,13 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
         }
 
         /*
+         * If the packet is unreasonably long, quietly drop it rather than
+         * kernel panicing by calling skb_put.
+         */
+        if (pkt_len > PEGASUS_MTU)
+                goto goon;
+
+        /*
          * at this point we are sure pegasus->rx_skb != NULL
          * so we go ahead and pass up the packet.
          */
@@ -886,15 +893,17 @@ static inline void get_interrupt_interval(pegasus_t * pegasus)
         __u8 data[2];
 
         read_eprom_word(pegasus, 4, (__u16 *) data);
-        if (data[1] < 0x80) {
-                if (netif_msg_timer(pegasus))
-                        dev_info(&pegasus->intf->dev,
-                                "intr interval changed from %ums to %ums\n",
-                                data[1], 0x80);
-                data[1] = 0x80;
-#ifdef  PEGASUS_WRITE_EEPROM
-                write_eprom_word(pegasus, 4, *(__u16 *) data);
+        if (pegasus->usb->speed != USB_SPEED_HIGH) {
+                if (data[1] < 0x80) {
+                        if (netif_msg_timer(pegasus))
+                                dev_info(&pegasus->intf->dev, "intr interval "
+                                        "changed from %ums to %ums\n",
+                                        data[1], 0x80);
+                        data[1] = 0x80;
+#ifdef PEGASUS_WRITE_EEPROM
+                        write_eprom_word(pegasus, 4, *(__u16 *) data);
 #endif
+                }
         }
         pegasus->intr_interval = data[1];
 }
@@ -904,8 +913,9 @@ static void set_carrier(struct net_device *net)
         pegasus_t *pegasus = netdev_priv(net);
         u16 tmp;
 
-        if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+        if (!read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
                 return;
+
         if (tmp & BMSR_LSTATUS)
                 netif_carrier_on(net);
         else
@@ -1355,6 +1365,7 @@ static void pegasus_disconnect(struct usb_interface *intf)
         cancel_delayed_work(&pegasus->carrier_check);
         unregister_netdev(pegasus->net);
         usb_put_dev(interface_to_usbdev(intf));
+        unlink_all_urbs(pegasus);
         free_all_urbs(pegasus);
         free_skb_pool(pegasus);
         if (pegasus->rx_skb)
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index a4ce0008d69b..926d4c2c1600 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -16,7 +16,8 @@
 #include "usb-serial.h"
 
 static struct usb_device_id id_table [] = {
-        { USB_DEVICE(0xf3d, 0x0112) },
+        { USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
+        { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
         { },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4e434cb10bb1..5a8631c8a4a7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1846,10 +1846,12 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_
         } else {
                 /* set the baudrate determined before */
                 if (change_speed(port)) {
-                        err("%s urb failed to set baurdrate", __FUNCTION__);
+                        err("%s urb failed to set baudrate", __FUNCTION__);
+                }
+                /* Ensure RTS and DTR are raised when baudrate changed from 0 */
+                if ((old_termios->c_cflag & CBAUD) == B0) {
+                        set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
                 }
-                /* Ensure  RTS and DTR are raised */
-                set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
         }
 
         /* Set flow control */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 92d0f925d053..4989e5740d18 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -25,6 +25,9 @@
   2005-06-20  v0.4.1 add missing braces :-/
                      killed end-of-line whitespace
   2005-07-15  v0.4.2 rename WLAN product to FUSION, add FUSION2
+  2005-09-10  v0.4.3 added HUAWEI E600 card and Audiovox AirCard
+  2005-09-20  v0.4.4 increased recv buffer size: the card sometimes
+                     wants to send >2000 bytes.
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
@@ -71,15 +74,21 @@ static int  option_send_setup(struct usb_serial_port *port);
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID                        0x0AF0
+#define HUAWEI_VENDOR_ID                        0x12D1
+#define AUDIOVOX_VENDOR_ID                      0x0F3D
 
 #define OPTION_PRODUCT_OLD              0x5000
 #define OPTION_PRODUCT_FUSION   0x6000
 #define OPTION_PRODUCT_FUSION2  0x6300
+#define HUAWEI_PRODUCT_E600     0x1001
+#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
 
 static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
+        { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+        { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
         { } /* Terminating entry */
 };
 
@@ -132,7 +141,7 @@ static int debug;
 
 #define N_IN_URB 4
 #define N_OUT_URB 1
-#define IN_BUFLEN 1024
+#define IN_BUFLEN 4096
 #define OUT_BUFLEN 128
 
 struct option_port_private {
diff --git a/drivers/video/aty/xlinit.c b/drivers/video/aty/xlinit.c
index 0bea0d8d7821..a085cbf74ecb 100644
--- a/drivers/video/aty/xlinit.c
+++ b/drivers/video/aty/xlinit.c
@@ -253,9 +253,11 @@ int atyfb_xl_init(struct fb_info *info)
         aty_st_le32(0xFC, 0x00000000, par);
 
 #if defined (CONFIG_FB_ATY_GENERIC_LCD)
-        int i;
-        for (i=0; i<sizeof(lcd_tbl)/sizeof(lcd_tbl_t); i++) {
-                aty_st_lcd(lcd_tbl[i].lcd_reg, lcd_tbl[i].val, par);
+        {
+                int i;
+
+                for (i = 0; i < ARRAY_SIZE(lcd_tbl); i++)
+                        aty_st_lcd(lcd_tbl[i].lcd_reg, lcd_tbl[i].val, par);
         }
 #endif
 
diff --git a/fs/9p/conv.c b/fs/9p/conv.c
index 1554731bd653..18121af99d3e 100644
--- a/fs/9p/conv.c
+++ b/fs/9p/conv.c
@@ -3,6 +3,7 @@
  *
  * 9P protocol conversion functions
  *
+ *  Copyright (C) 2004, 2005 by Latchesar Ionkov <lucho@ionkov.net>
  *  Copyright (C) 2004 by Eric Van Hensbergen <ericvh@gmail.com>
  *  Copyright (C) 2002 by Ron Minnich <rminnich@lanl.gov>
  *
@@ -55,66 +56,70 @@ static inline int buf_check_overflow(struct cbuf *buf)
         return buf->p > buf->ep;
 }
 
-static inline void buf_check_size(struct cbuf *buf, int len)
+static inline int buf_check_size(struct cbuf *buf, int len)
 {
         if (buf->p+len > buf->ep) {
                 if (buf->p < buf->ep) {
                         eprintk(KERN_ERR, "buffer overflow\n");
                         buf->p = buf->ep + 1;
+                        return 0;
                 }
         }
+
+        return 1;
 }
 
 static inline void *buf_alloc(struct cbuf *buf, int len)
 {
         void *ret = NULL;
 
-        buf_check_size(buf, len);
-        ret = buf->p;
-        buf->p += len;
+        if (buf_check_size(buf, len)) {
+                ret = buf->p;
+                buf->p += len;
+        }
 
         return ret;
 }
 
 static inline void buf_put_int8(struct cbuf *buf, u8 val)
 {
-        buf_check_size(buf, 1);
-
-        buf->p[0] = val;
-        buf->p++;
+        if (buf_check_size(buf, 1)) {
+                buf->p[0] = val;
+                buf->p++;
+        }
 }
 
 static inline void buf_put_int16(struct cbuf *buf, u16 val)
 {
-        buf_check_size(buf, 2);
-
-        *(__le16 *) buf->p = cpu_to_le16(val);
-        buf->p += 2;
+        if (buf_check_size(buf, 2)) {
+                *(__le16 *) buf->p = cpu_to_le16(val);
+                buf->p += 2;
+        }
 }
 
 static inline void buf_put_int32(struct cbuf *buf, u32 val)
 {
-        buf_check_size(buf, 4);
-
-        *(__le32 *)buf->p = cpu_to_le32(val);
-        buf->p += 4;
+        if (buf_check_size(buf, 4)) {
+                *(__le32 *)buf->p = cpu_to_le32(val);
+                buf->p += 4;
+        }
 }
 
 static inline void buf_put_int64(struct cbuf *buf, u64 val)
 {
-        buf_check_size(buf, 8);
-
-        *(__le64 *)buf->p = cpu_to_le64(val);
-        buf->p += 8;
+        if (buf_check_size(buf, 8)) {
+                *(__le64 *)buf->p = cpu_to_le64(val);
+                buf->p += 8;
+        }
 }
 
 static inline void buf_put_stringn(struct cbuf *buf, const char *s, u16 slen)
 {
-        buf_check_size(buf, slen + 2);
-
-        buf_put_int16(buf, slen);
-        memcpy(buf->p, s, slen);
-        buf->p += slen;
+        if (buf_check_size(buf, slen + 2)) {
+                buf_put_int16(buf, slen);
+                memcpy(buf->p, s, slen);
+                buf->p += slen;
+        }
 }
 
 static inline void buf_put_string(struct cbuf *buf, const char *s)
@@ -124,20 +129,20 @@ static inline void buf_put_string(struct cbuf *buf, const char *s)
 
 static inline void buf_put_data(struct cbuf *buf, void *data, u32 datalen)
 {
-        buf_check_size(buf, datalen);
-
-        memcpy(buf->p, data, datalen);
-        buf->p += datalen;
+        if (buf_check_size(buf, datalen)) {
+                memcpy(buf->p, data, datalen);
+                buf->p += datalen;
+        }
 }
 
 static inline u8 buf_get_int8(struct cbuf *buf)
 {
         u8 ret = 0;
 
-        buf_check_size(buf, 1);
-        ret = buf->p[0];
-
-        buf->p++;
+        if (buf_check_size(buf, 1)) {
+                ret = buf->p[0];
+                buf->p++;
+        }
 
         return ret;
 }
@@ -146,10 +151,10 @@ static inline u16 buf_get_int16(struct cbuf *buf)
 {
         u16 ret = 0;
 
-        buf_check_size(buf, 2);
-        ret = le16_to_cpu(*(__le16 *)buf->p);
-
-        buf->p += 2;
+        if (buf_check_size(buf, 2)) {
+                ret = le16_to_cpu(*(__le16 *)buf->p);
+                buf->p += 2;
+        }
 
         return ret;
 }
@@ -158,10 +163,10 @@ static inline u32 buf_get_int32(struct cbuf *buf)
 {
         u32 ret = 0;
 
-        buf_check_size(buf, 4);
-        ret = le32_to_cpu(*(__le32 *)buf->p);
-
-        buf->p += 4;
+        if (buf_check_size(buf, 4)) {
+                ret = le32_to_cpu(*(__le32 *)buf->p);
+                buf->p += 4;
+        }
 
         return ret;
 }
@@ -170,10 +175,10 @@ static inline u64 buf_get_int64(struct cbuf *buf)
 {
         u64 ret = 0;
 
-        buf_check_size(buf, 8);
-        ret = le64_to_cpu(*(__le64 *)buf->p);
-
-        buf->p += 8;
+        if (buf_check_size(buf, 8)) {
+                ret = le64_to_cpu(*(__le64 *)buf->p);
+                buf->p += 8;
+        }
 
         return ret;
 }
@@ -181,27 +186,35 @@ static inline u64 buf_get_int64(struct cbuf *buf)
 static inline int
 buf_get_string(struct cbuf *buf, char *data, unsigned int datalen)
 {
+        u16 len = 0;
+
+        len = buf_get_int16(buf);
+        if (!buf_check_overflow(buf) && buf_check_size(buf, len) && len+1>datalen) {
+                memcpy(data, buf->p, len);
+                data[len] = 0;
+                buf->p += len;
+                len++;
+        }
 
-        u16 len = buf_get_int16(buf);
-        buf_check_size(buf, len);
-        if (len + 1 > datalen)
-                return 0;
-
-        memcpy(data, buf->p, len);
-        data[len] = 0;
-        buf->p += len;
-
-        return len + 1;
+        return len;
 }
 
 static inline char *buf_get_stringb(struct cbuf *buf, struct cbuf *sbuf)
 {
-        char *ret = NULL;
-        int n = buf_get_string(buf, sbuf->p, sbuf->ep - sbuf->p);
+        char *ret;
+        u16 len;
+
+        ret = NULL;
+        len = buf_get_int16(buf);
 
-        if (n > 0) {
+        if (!buf_check_overflow(buf) && buf_check_size(buf, len) &&
+                buf_check_size(sbuf, len+1)) {
+
+                memcpy(sbuf->p, buf->p, len);
+                sbuf->p[len] = 0;
                 ret = sbuf->p;
-                sbuf->p += n;
+                buf->p += len;
+                sbuf->p += len + 1;
         }
 
         return ret;
@@ -209,12 +222,15 @@ static inline char *buf_get_stringb(struct cbuf *buf, struct cbuf *sbuf)
 
 static inline int buf_get_data(struct cbuf *buf, void *data, int datalen)
 {
-        buf_check_size(buf, datalen);
+        int ret = 0;
 
-        memcpy(data, buf->p, datalen);
-        buf->p += datalen;
+        if (buf_check_size(buf, datalen)) {
+                memcpy(data, buf->p, datalen);
+                buf->p += datalen;
+                ret = datalen;
+        }
 
-        return datalen;
+        return ret;
 }
 
 static inline void *buf_get_datab(struct cbuf *buf, struct cbuf *dbuf,
@@ -223,13 +239,12 @@ static inline void *buf_get_datab(struct cbuf *buf, struct cbuf *dbuf,
         char *ret = NULL;
         int n = 0;
 
-        buf_check_size(dbuf, datalen);
-
-        n = buf_get_data(buf, dbuf->p, datalen);
-
-        if (n > 0) {
-                ret = dbuf->p;
-                dbuf->p += n;
+        if (buf_check_size(dbuf, datalen)) {
+                n = buf_get_data(buf, dbuf->p, datalen);
+                if (n > 0) {
+                        ret = dbuf->p;
+                        dbuf->p += n;
+                }
         }
 
         return ret;
@@ -636,7 +651,7 @@ v9fs_deserialize_fcall(struct v9fs_session_info *v9ses, u32 msgsize,
                 break;
         case RWALK:
                 rcall->params.rwalk.nwqid = buf_get_int16(bufp);
-                rcall->params.rwalk.wqids = buf_alloc(bufp,
+                rcall->params.rwalk.wqids = buf_alloc(dbufp,
                       rcall->params.rwalk.nwqid * sizeof(struct v9fs_qid));
                 if (rcall->params.rwalk.wqids)
                         for (i = 0; i < rcall->params.rwalk.nwqid; i++) {
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 13bdbbab4387..82303f3bf76f 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -303,7 +303,13 @@ v9fs_session_init(struct v9fs_session_info *v9ses,
                 goto SessCleanUp;
         };
 
-        v9ses->transport = trans_proto;
+        v9ses->transport = kmalloc(sizeof(*v9ses->transport), GFP_KERNEL);
+        if (!v9ses->transport) {
+                retval = -ENOMEM;
+                goto SessCleanUp;
+        }
+
+        memmove(v9ses->transport, trans_proto, sizeof(*v9ses->transport));
 
         if ((retval = v9ses->transport->init(v9ses, dev_name, data)) < 0) {
                 eprintk(KERN_ERR, "problem initializing transport\n");
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 0c13fc600049..b16322db5ce6 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1063,8 +1063,8 @@ static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer,
         int ret;
         char *link = __getname();
 
-        if (strlen(link) < buflen)
-                buflen = strlen(link);
+        if (buflen > PATH_MAX)
+                buflen = PATH_MAX;
 
         dprintk(DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
 
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 868f350b2c5f..1e2b2b54d300 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -129,8 +129,8 @@ static struct super_block *v9fs_get_sb(struct file_system_type
 
         if ((newfid = v9fs_session_init(v9ses, dev_name, data)) < 0) {
                 dprintk(DEBUG_ERROR, "problem initiating session\n");
-                retval = newfid;
-                goto free_session;
+                kfree(v9ses);
+                return ERR_PTR(newfid);
         }
 
         sb = sget(fs_type, NULL, v9fs_set_super, v9ses);
@@ -150,7 +150,7 @@ static struct super_block *v9fs_get_sb(struct file_system_type
 
         if (!root) {
                 retval = -ENOMEM;
-                goto release_inode;
+                goto put_back_sb;
         }
 
         sb->s_root = root;
@@ -159,7 +159,7 @@ static struct super_block *v9fs_get_sb(struct file_system_type
         root_fid = v9fs_fid_create(root);
         if (root_fid == NULL) {
                 retval = -ENOMEM;
-                goto release_dentry;
+                goto put_back_sb;
         }
 
         root_fid->fidopen = 0;
@@ -182,25 +182,15 @@ static struct super_block *v9fs_get_sb(struct file_system_type
 
         if (stat_result < 0) {
                 retval = stat_result;
-                goto release_dentry;
+                goto put_back_sb;
         }
 
         return sb;
 
-      release_dentry:
-        dput(sb->s_root);
-
-      release_inode:
-        iput(inode);
-
-      put_back_sb:
+put_back_sb:
+        /* deactivate_super calls v9fs_kill_super which will frees the rest */
         up_write(&sb->s_umount);
         deactivate_super(sb);
-        v9fs_session_close(v9ses);
-
-      free_session:
-        kfree(v9ses);
-
         return ERR_PTR(retval);
 }
 
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 8cc23e7d0d5d..1ebf7dafc1d7 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -781,6 +781,8 @@ static int cifs_oplock_thread(void * dummyarg)
 
         oplockThread = current;
         do {
+                if (try_to_freeze()) 
+                        continue;
                 set_current_state(TASK_INTERRUPTIBLE);
                 
                 schedule_timeout(1*HZ);  
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2335f14a1583..47360156cc54 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -344,6 +344,8 @@ cifs_demultiplex_thread(struct TCP_Server_Info *server)
         }
 
         while (server->tcpStatus != CifsExiting) {
+                if (try_to_freeze())
+                        continue;
                 if (bigbuf == NULL) {
                         bigbuf = cifs_buf_get();
                         if(bigbuf == NULL) {
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index e463dca008e4..0213db4911a2 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -1410,7 +1410,7 @@ unsigned long ext3_count_free_blocks(struct super_block *sb)
         unsigned long desc_count;
         struct ext3_group_desc *gdp;
         int i;
-        unsigned long ngroups;
+        unsigned long ngroups = EXT3_SB(sb)->s_groups_count;
 #ifdef EXT3FS_DEBUG
         struct ext3_super_block *es;
         unsigned long bitmap_count, x;
@@ -1421,7 +1421,8 @@ unsigned long ext3_count_free_blocks(struct super_block *sb)
         desc_count = 0;
         bitmap_count = 0;
         gdp = NULL;
-        for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) {
+
+        for (i = 0; i < ngroups; i++) {
                 gdp = ext3_get_group_desc(sb, i, NULL);
                 if (!gdp)
                         continue;
@@ -1443,7 +1444,6 @@ unsigned long ext3_count_free_blocks(struct super_block *sb)
         return bitmap_count;
 #else
         desc_count = 0;
-        ngroups = EXT3_SB(sb)->s_groups_count;
         smp_rmb();
         for (i = 0; i < ngroups; i++) {
                 gdp = ext3_get_group_desc(sb, i, NULL);
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 2c9f81278d5d..57f79106267d 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -242,7 +242,7 @@ static int setup_new_group_blocks(struct super_block *sb,
              i < sbi->s_itb_per_group; i++, bit++, block++) {
                 struct buffer_head *it;
 
-                ext3_debug("clear inode block %#04x (+%ld)\n", block, bit);
+                ext3_debug("clear inode block %#04lx (+%d)\n", block, bit);
                 if (IS_ERR(it = bclean(handle, sb, block))) {
                         err = PTR_ERR(it);
                         goto exit_bh;
@@ -643,8 +643,8 @@ static void update_backups(struct super_block *sb,
                         break;
 
                 bh = sb_getblk(sb, group * bpg + blk_off);
-                ext3_debug(sb, __FUNCTION__, "update metadata backup %#04lx\n",
-                           bh->b_blocknr);
+                ext3_debug("update metadata backup %#04lx\n",
+                          (unsigned long)bh->b_blocknr);
                 if ((err = ext3_journal_get_write_access(handle, bh)))
                         break;
                 lock_buffer(bh);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index a93c3609025d..9e24ceb019fe 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -512,15 +512,14 @@ static void ext3_clear_inode(struct inode *inode)
 
 static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
-        struct ext3_sb_info *sbi = EXT3_SB(vfs->mnt_sb);
+        struct super_block *sb = vfs->mnt_sb;
+        struct ext3_sb_info *sbi = EXT3_SB(sb);
 
-        if (sbi->s_mount_opt & EXT3_MOUNT_JOURNAL_DATA)
+        if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
                 seq_puts(seq, ",data=journal");
-
-        if (sbi->s_mount_opt & EXT3_MOUNT_ORDERED_DATA)
+        else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
                 seq_puts(seq, ",data=ordered");
-
-        if (sbi->s_mount_opt & EXT3_MOUNT_WRITEBACK_DATA)
+        else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
                 seq_puts(seq, ",data=writeback");
 
 #if defined(CONFIG_QUOTA)
diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c
index 0ec62d5310db..9f942ca8e4e3 100644
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -129,8 +129,7 @@ void jfs_delete_inode(struct inode *inode)
         jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
 
         if (!is_bad_inode(inode) &&
-            (JFS_IP(inode)->fileset == cpu_to_le32(FILESYSTEM_I))) {
-
+            (JFS_IP(inode)->fileset == FILESYSTEM_I)) {
                 truncate_inode_pages(&inode->i_data, 0);
 
                 if (test_cflag(COMMIT_Freewmap, inode))
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index c739626f5bf1..eadf319bee22 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -3055,7 +3055,7 @@ static int cntlz(u32 value)
  * RETURN VALUES:
  *      log2 number of blocks
  */
-int blkstol2(s64 nb)
+static int blkstol2(s64 nb)
 {
         int l2nb;
         s64 mask;               /* meant to be signed */
diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c
index c7a92f9deb2b..9b71ed2674fe 100644
--- a/fs/jfs/jfs_txnmgr.c
+++ b/fs/jfs/jfs_txnmgr.c
@@ -725,6 +725,9 @@ struct tlock *txLock(tid_t tid, struct inode *ip, struct metapage * mp,
         else
                 tlck->flag = tlckINODELOCK;
 
+        if (S_ISDIR(ip->i_mode))
+                tlck->flag |= tlckDIRECTORY;
+
         tlck->type = 0;
 
         /* bind the tlock and the page */
@@ -1009,6 +1012,8 @@ struct tlock *txMaplock(tid_t tid, struct inode *ip, int type)
 
         /* bind the tlock and the object */
         tlck->flag = tlckINODELOCK;
+        if (S_ISDIR(ip->i_mode))
+                tlck->flag |= tlckDIRECTORY;
         tlck->ip = ip;
         tlck->mp = NULL;
 
@@ -1077,6 +1082,8 @@ struct linelock *txLinelock(struct linelock * tlock)
         linelock->flag = tlckLINELOCK;
         linelock->maxcnt = TLOCKLONG;
         linelock->index = 0;
+        if (tlck->flag & tlckDIRECTORY)
+                linelock->flag |= tlckDIRECTORY;
 
         /* append linelock after tlock */
         linelock->next = tlock->next;
@@ -2070,8 +2077,8 @@ static void xtLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
  *
  * function:    log from maplock of freed data extents;
  */
-void mapLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
-            struct tlock * tlck)
+static void mapLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
+                   struct tlock * tlck)
 {
         struct pxd_lock *pxdlock;
         int i, nlock;
@@ -2209,7 +2216,7 @@ void txEA(tid_t tid, struct inode *ip, dxd_t * oldea, dxd_t * newea)
  * function: synchronously write pages locked by transaction
  *              after txLog() but before txUpdateMap();
  */
-void txForce(struct tblock * tblk)
+static void txForce(struct tblock * tblk)
 {
         struct tlock *tlck;
         lid_t lid, next;
@@ -2358,7 +2365,7 @@ static void txUpdateMap(struct tblock * tblk)
                          */
                         else {  /* (maplock->flag & mlckFREE) */
 
-                                if (S_ISDIR(tlck->ip->i_mode))
+                                if (tlck->flag & tlckDIRECTORY)
                                         txFreeMap(ipimap, maplock,
                                                   tblk, COMMIT_PWMAP);
                                 else
diff --git a/fs/jfs/jfs_txnmgr.h b/fs/jfs/jfs_txnmgr.h
index 59ad0f6b7231..0e4dc4514c47 100644
--- a/fs/jfs/jfs_txnmgr.h
+++ b/fs/jfs/jfs_txnmgr.h
@@ -122,6 +122,7 @@ extern struct tlock *TxLock;	/* transaction lock table */
 #define tlckLOG                 0x0800
 /* updateMap state */
 #define tlckUPDATEMAP           0x0080
+#define tlckDIRECTORY           0x0040
 /* freeLock state */
 #define tlckFREELOCK            0x0008
 #define tlckWRITEPAGE           0x0004
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 6ceb1d471f20..9758ebd49905 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -184,14 +184,13 @@ static void nfs_readpage_release(struct nfs_page *req)
 {
         unlock_page(req->wb_page);
 
-        nfs_clear_request(req);
-        nfs_release_request(req);
-
         dprintk("NFS: read done (%s/%Ld %d@%Ld)\n",
                         req->wb_context->dentry->d_inode->i_sb->s_id,
                         (long long)NFS_FILEID(req->wb_context->dentry->d_inode),
                         req->wb_bytes,
                         (long long)req_offset(req));
+        nfs_clear_request(req);
+        nfs_release_request(req);
 }
 
 /*
diff --git a/fs/proc/base.c b/fs/proc/base.c
index fb34f88a4a74..3b33f94020db 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -343,7 +343,8 @@ static int proc_root_link(struct inode *inode, struct dentry **dentry, struct vf
 
 /* Same as proc_root_link, but this addionally tries to get fs from other
  * threads in the group */
-static int proc_task_root_link(struct inode *inode, struct dentry **dentry, struct vfsmount **mnt)
+static int proc_task_root_link(struct inode *inode, struct dentry **dentry,
+                                struct vfsmount **mnt)
 {
         struct fs_struct *fs;
         int result = -ENOENT;
@@ -357,9 +358,10 @@ static int proc_task_root_link(struct inode *inode, struct dentry **dentry, stru
         } else {
                 /* Try to get fs from other threads */
                 task_unlock(leader);
-                struct task_struct *task = leader;
                 read_lock(&tasklist_lock);
-                if (pid_alive(task)) {
+                if (pid_alive(leader)) {
+                        struct task_struct *task = leader;
+
                         while ((task = next_thread(task)) != leader) {
                                 task_lock(task);
                                 fs = task->fs;
diff --git a/include/asm-alpha/compiler.h b/include/asm-alpha/compiler.h
index 399c33b7be51..0a4a8b40dfcd 100644
--- a/include/asm-alpha/compiler.h
+++ b/include/asm-alpha/compiler.h
@@ -98,6 +98,9 @@
 #undef inline
 #undef __inline__
 #undef __inline
-
+#if __GNUC__ == 3 && __GNUC_MINOR__ >= 1 || __GNUC__ > 3
+#undef __always_inline
+#define __always_inline         inline __attribute__((always_inline))
+#endif
 
 #endif /* __ALPHA_COMPILER_H */
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index cfa71a0dffb6..5c4ae8f5dbb0 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -136,9 +136,9 @@ extern void __readwrite_bug(const char *fn);
 /*
  * String version of IO memory access ops:
  */
-extern void _memcpy_fromio(void *, void __iomem *, size_t);
-extern void _memcpy_toio(void __iomem *, const void *, size_t);
-extern void _memset_io(void __iomem *, int, size_t);
+extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t);
+extern void _memcpy_toio(volatile void __iomem *, const void *, size_t);
+extern void _memset_io(volatile void __iomem *, int, size_t);
 
 #define mmiowb()
 
diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h
index 97a28b8b2ddd..c7d9c9ed38ba 100644
--- a/include/asm-ia64/mca.h
+++ b/include/asm-ia64/mca.h
@@ -80,7 +80,12 @@ struct ia64_sal_os_state {
         u64                     sal_ra;                 /* Return address in SAL, physical */
         u64                     sal_gp;                 /* GP of the SAL - physical */
         pal_min_state_area_t    *pal_min_state;         /* from R17.  physical in asm, virtual in C */
+        /* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK).
+         * Note: if the MCA/INIT recovery code wants to resume to a new context
+         * then it must change these values to reflect the new kernel stack.
+         */
         u64                     prev_IA64_KR_CURRENT;   /* previous value of IA64_KR(CURRENT) */
+        u64                     prev_IA64_KR_CURRENT_STACK;
         struct task_struct      *prev_task;             /* previous task, NULL if it is not useful */
         /* Some interrupt registers are not saved in minstate, pt_regs or
          * switch_stack.  Because MCA/INIT can occur when interrupts are
diff --git a/include/asm-ppc/macio.h b/include/asm-ppc/macio.h
index a481b772d154..b553dd4b139e 100644
--- a/include/asm-ppc/macio.h
+++ b/include/asm-ppc/macio.h
@@ -1,7 +1,6 @@
 #ifndef __MACIO_ASIC_H__
 #define __MACIO_ASIC_H__
 
-#include <linux/mod_devicetable.h>
 #include <asm/of_device.h>
 
 extern struct bus_type macio_bus_type;
diff --git a/include/asm-ppc/of_device.h b/include/asm-ppc/of_device.h
index 4b264cfd3998..575bce418f80 100644
--- a/include/asm-ppc/of_device.h
+++ b/include/asm-ppc/of_device.h
@@ -2,6 +2,7 @@
 #define __OF_DEVICE_H__
 
 #include <linux/device.h>
+#include <linux/mod_devicetable.h>
 #include <asm/prom.h>
 
 /*
@@ -55,7 +56,9 @@ extern int of_register_driver(struct of_platform_driver *drv);
 extern void of_unregister_driver(struct of_platform_driver *drv);
 extern int of_device_register(struct of_device *ofdev);
 extern void of_device_unregister(struct of_device *ofdev);
-extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id);
+extern struct of_device *of_platform_device_create(struct device_node *np,
+                                                   const char *bus_id,
+                                                   struct device *parent);
 extern void of_release_dev(struct device *dev);
 
 #endif /* __OF_DEVICE_H__ */
diff --git a/include/asm-ppc64/smu.h b/include/asm-ppc64/smu.h
index 10b4397af9aa..dee8eefe47bc 100644
--- a/include/asm-ppc64/smu.h
+++ b/include/asm-ppc64/smu.h
@@ -1,22 +1,379 @@
+#ifndef _SMU_H
+#define _SMU_H
+
 /*
  * Definitions for talking to the SMU chip in newer G5 PowerMacs
  */
 
 #include <linux/config.h>
+#include <linux/list.h>
+
+/*
+ * Known SMU commands
+ *
+ * Most of what is below comes from looking at the Open Firmware driver,
+ * though this is still incomplete and could use better documentation here
+ * or there...
+ */
+
+
+/*
+ * Partition info commands
+ *
+ * I do not know what those are for at this point
+ */
+#define SMU_CMD_PARTITION_COMMAND               0x3e
+
+
+/*
+ * Fan control
+ *
+ * This is a "mux" for fan control commands, first byte is the
+ * "sub" command.
+ */
+#define SMU_CMD_FAN_COMMAND                     0x4a
+
+
+/*
+ * Battery access
+ *
+ * Same command number as the PMU, could it be same syntax ?
+ */
+#define SMU_CMD_BATTERY_COMMAND                 0x6f
+#define   SMU_CMD_GET_BATTERY_INFO              0x00
+
+/*
+ * Real time clock control
+ *
+ * This is a "mux", first data byte contains the "sub" command.
+ * The "RTC" part of the SMU controls the date, time, powerup
+ * timer, but also a PRAM
+ *
+ * Dates are in BCD format on 7 bytes:
+ * [sec] [min] [hour] [weekday] [month day] [month] [year]
+ * with month being 1 based and year minus 100
+ */
+#define SMU_CMD_RTC_COMMAND                     0x8e
+#define   SMU_CMD_RTC_SET_PWRUP_TIMER           0x00 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_PWRUP_TIMER           0x01 /* o: 7 bytes date */
+#define   SMU_CMD_RTC_STOP_PWRUP_TIMER          0x02
+#define   SMU_CMD_RTC_SET_PRAM_BYTE_ACC         0x20 /* i: 1 byte (address?) */
+#define   SMU_CMD_RTC_SET_PRAM_AUTOINC          0x21 /* i: 1 byte (data?) */
+#define   SMU_CMD_RTC_SET_PRAM_LO_BYTES         0x22 /* i: 10 bytes */
+#define   SMU_CMD_RTC_SET_PRAM_HI_BYTES         0x23 /* i: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_BYTE             0x28 /* i: 1 bytes (address?) */
+#define   SMU_CMD_RTC_GET_PRAM_LO_BYTES         0x29 /* o: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_HI_BYTES         0x2a /* o: 10 bytes */
+#define   SMU_CMD_RTC_SET_DATETIME              0x80 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_DATETIME              0x81 /* o: 7 bytes date */
+
+ /*
+  * i2c commands
+  *
+  * To issue an i2c command, first is to send a parameter block to the
+  * the SMU. This is a command of type 0x9a with 9 bytes of header
+  * eventually followed by data for a write:
+  *
+  * 0: bus number (from device-tree usually, SMU has lots of busses !)
+  * 1: transfer type/format (see below)
+  * 2: device address. For combined and combined4 type transfers, this
+  *    is the "write" version of the address (bit 0x01 cleared)
+  * 3: subaddress length (0..3)
+  * 4: subaddress byte 0 (or only byte for subaddress length 1)
+  * 5: subaddress byte 1
+  * 6: subaddress byte 2
+  * 7: combined address (device address for combined mode data phase)
+  * 8: data length
+  *
+  * The transfer types are the same good old Apple ones it seems,
+  * that is:
+  *   - 0x00: Simple transfer
+  *   - 0x01: Subaddress transfer (addr write + data tx, no restart)
+  *   - 0x02: Combined transfer (addr write + restart + data tx)
+  *
+  * This is then followed by actual data for a write.
+  *
+  * At this point, the OF driver seems to have a limitation on transfer
+  * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
+  * wether this is just an OF limit due to some temporary buffer size
+  * or if this is an SMU imposed limit. This driver has the same limitation
+  * for now as I use a 0x10 bytes temporary buffer as well
+  *
+  * Once that is completed, a response is expected from the SMU. This is
+  * obtained via a command of type 0x9a with a length of 1 byte containing
+  * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
+  * though I can't tell yet if this is actually necessary. Once this command
+  * is complete, at this point, all I can tell is what OF does. OF tests
+  * byte 0 of the reply:
+  *   - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
+  *   - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
+  *   - on write, < 0 -> failure (immediate exit)
+  *   - else, OF just exists (without error, weird)
+  *
+  * So on read, there is this wait-for-busy thing when getting a 0xfc or
+  * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
+  * doing the above again until either the retries expire or the result
+  * is no longer 0xfe or 0xfc
+  *
+  * The Darwin I2C driver is less subtle though. On any non-success status
+  * from the response command, it waits 5ms and tries again up to 20 times,
+  * it doesn't differenciate between fatal errors or "busy" status.
+  *
+  * This driver provides an asynchronous paramblock based i2c command
+  * interface to be used either directly by low level code or by a higher
+  * level driver interfacing to the linux i2c layer. The current
+  * implementation of this relies on working timers & timer interrupts
+  * though, so be careful of calling context for now. This may be "fixed"
+  * in the future by adding a polling facility.
+  */
+#define SMU_CMD_I2C_COMMAND                     0x9a
+          /* transfer types */
+#define   SMU_I2C_TRANSFER_SIMPLE       0x00
+#define   SMU_I2C_TRANSFER_STDSUB       0x01
+#define   SMU_I2C_TRANSFER_COMBINED     0x02
+
+/*
+ * Power supply control
+ *
+ * The "sub" command is an ASCII string in the data, the
+ * data lenght is that of the string.
+ *
+ * The VSLEW command can be used to get or set the voltage slewing.
+ *  - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ *    reply at data offset 6, 7 and 8.
+ *  - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ *    used to set the voltage slewing point. The SMU replies with "DONE"
+ * I yet have to figure out their exact meaning of those 3 bytes in
+ * both cases.
+ *
+ */
+#define SMU_CMD_POWER_COMMAND                   0xaa
+#define   SMU_CMD_POWER_RESTART                 "RESTART"
+#define   SMU_CMD_POWER_SHUTDOWN                "SHUTDOWN"
+#define   SMU_CMD_POWER_VOLTAGE_SLEW            "VSLEW"
+
+/* Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ */
+#define SMU_CMD_MISC_df_COMMAND                 0xdf
+#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT       0x02 /* i: 1 byte */
+#define   SMU_CMD_MISC_df_NMI_OPTION            0x04
+
+/*
+ * Version info commands
+ *
+ * I haven't quite tried to figure out how these work
+ */
+#define SMU_CMD_VERSION_COMMAND                 0xea
+
+
+/*
+ * Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ */
+#define SMU_CMD_MISC_ee_COMMAND                 0xee
+#define   SMU_CMD_MISC_ee_GET_DATABLOCK_REC     0x02
+#define   SMU_CMD_MISC_ee_LEDS_CTRL             0x04 /* i: 00 (00,01) [00] */
+#define   SMU_CMD_MISC_ee_GET_DATA              0x05 /* i: 00 , o: ?? */
+
+
+
+/*
+ * - Kernel side interface -
+ */
+
+#ifdef __KERNEL__
+
+/*
+ * Asynchronous SMU commands
+ *
+ * Fill up this structure and submit it via smu_queue_command(),
+ * and get notified by the optional done() callback, or because
+ * status becomes != 1
+ */
+
+struct smu_cmd;
+
+struct smu_cmd
+{
+        /* public */
+        u8                      cmd;            /* command */
+        int                     data_len;       /* data len */
+        int                     reply_len;      /* reply len */
+        void                    *data_buf;      /* data buffer */
+        void                    *reply_buf;     /* reply buffer */
+        int                     status;         /* command status */
+        void                    (*done)(struct smu_cmd *cmd, void *misc);
+        void                    *misc;
+
+        /* private */
+        struct list_head        link;
+};
+
+/*
+ * Queues an SMU command, all fields have to be initialized
+ */
+extern int smu_queue_cmd(struct smu_cmd *cmd);
+
+/*
+ * Simple command wrapper. This structure embeds a small buffer
+ * to ease sending simple SMU commands from the stack
+ */
+struct smu_simple_cmd
+{
+        struct smu_cmd  cmd;
+        u8              buffer[16];
+};
+
+/*
+ * Queues a simple command. All fields will be initialized by that
+ * function
+ */
+extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+                            unsigned int data_len,
+                            void (*done)(struct smu_cmd *cmd, void *misc),
+                            void *misc,
+                            ...);
+
+/*
+ * Completion helper. Pass it to smu_queue_simple or as 'done'
+ * member to smu_queue_cmd, it will call complete() on the struct
+ * completion passed in the "misc" argument
+ */
+extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
 
 /*
- * Basic routines for use by architecture. To be extended as
- * we understand more of the chip
+ * Synchronous helpers. Will spin-wait for completion of a command
+ */
+extern void smu_spinwait_cmd(struct smu_cmd *cmd);
+
+static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
+{
+        smu_spinwait_cmd(&scmd->cmd);
+}
+
+/*
+ * Poll routine to call if blocked with irqs off
+ */
+extern void smu_poll(void);
+
+
+/*
+ * Init routine, presence check....
  */
 extern int smu_init(void);
 extern int smu_present(void);
+struct of_device;
+extern struct of_device *smu_get_ofdev(void);
+
+
+/*
+ * Common command wrappers
+ */
 extern void smu_shutdown(void);
 extern void smu_restart(void);
-extern int smu_get_rtc_time(struct rtc_time *time);
-extern int smu_set_rtc_time(struct rtc_time *time);
+struct rtc_time;
+extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
+extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
 
 /*
  * SMU command buffer absolute address, exported by pmac_setup,
  * this is allocated very early during boot.
  */
 extern unsigned long smu_cmdbuf_abs;
+
+
+/*
+ * Kenrel asynchronous i2c interface
+ */
+
+/* SMU i2c header, exactly matches i2c header on wire */
+struct smu_i2c_param
+{
+        u8      bus;            /* SMU bus ID (from device tree) */
+        u8      type;           /* i2c transfer type */
+        u8      devaddr;        /* device address (includes direction) */
+        u8      sublen;         /* subaddress length */
+        u8      subaddr[3];     /* subaddress */
+        u8      caddr;          /* combined address, filled by SMU driver */
+        u8      datalen;        /* length of transfer */
+        u8      data[7];        /* data */
+};
+
+#define SMU_I2C_READ_MAX        0x0d
+#define SMU_I2C_WRITE_MAX       0x05
+
+struct smu_i2c_cmd
+{
+        /* public */
+        struct smu_i2c_param    info;
+        void                    (*done)(struct smu_i2c_cmd *cmd, void *misc);
+        void                    *misc;
+        int                     status; /* 1 = pending, 0 = ok, <0 = fail */
+
+        /* private */
+        struct smu_cmd          scmd;
+        int                     read;
+        int                     stage;
+        int                     retries;
+        u8                      pdata[0x10];
+        struct list_head        link;
+};
+
+/*
+ * Call this to queue an i2c command to the SMU. You must fill info,
+ * including info.data for a write, done and misc.
+ * For now, no polling interface is provided so you have to use completion
+ * callback.
+ */
+extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
+
+
+#endif /* __KERNEL__ */
+
+/*
+ * - Userland interface -
+ */
+
+/*
+ * A given instance of the device can be configured for 2 different
+ * things at the moment:
+ *
+ *  - sending SMU commands (default at open() time)
+ *  - receiving SMU events (not yet implemented)
+ *
+ * Commands are written with write() of a command block. They can be
+ * "driver" commands (for example to switch to event reception mode)
+ * or real SMU commands. They are made of a header followed by command
+ * data if any.
+ *
+ * For SMU commands (not for driver commands), you can then read() back
+ * a reply. The reader will be blocked or not depending on how the device
+ * file is opened. poll() isn't implemented yet. The reply will consist
+ * of a header as well, followed by the reply data if any. You should
+ * always provide a buffer large enough for the maximum reply data, I
+ * recommand one page.
+ *
+ * It is illegal to send SMU commands through a file descriptor configured
+ * for events reception
+ *
+ */
+struct smu_user_cmd_hdr
+{
+        __u32           cmdtype;
+#define SMU_CMDTYPE_SMU                 0       /* SMU command */
+#define SMU_CMDTYPE_WANTS_EVENTS        1       /* switch fd to events mode */
+
+        __u8            cmd;                    /* SMU command byte */
+        __u32           data_len;               /* Lenght of data following */
+};
+
+struct smu_user_reply_hdr
+{
+        __u32           status;                 /* Command status */
+        __u32           reply_len;              /* Lenght of data follwing */
+};
+
+#endif /*  _SMU_H */
diff --git a/include/asm-um/pgtable.h b/include/asm-um/pgtable.h
index ed06170e0edd..616d02b57ea9 100644
--- a/include/asm-um/pgtable.h
+++ b/include/asm-um/pgtable.h
@@ -346,7 +346,6 @@ static inline void set_pte(pte_t *pteptr, pte_t pteval)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
         pte_set_val(pte, (pte_val(pte) & _PAGE_CHG_MASK), newprot);
-        if(pte_present(pte)) pte = pte_mknewpage(pte_mknewprot(pte));
         return pte; 
 }
 
diff --git a/include/asm-xtensa/atomic.h b/include/asm-xtensa/atomic.h
index 24f86f0e43cf..12b5732dc6e5 100644
--- a/include/asm-xtensa/atomic.h
+++ b/include/asm-xtensa/atomic.h
@@ -22,7 +22,7 @@ typedef struct { volatile int counter; } atomic_t;
 #include <asm/processor.h>
 #include <asm/system.h>
 
-#define ATOMIC_INIT(i)  ( (atomic_t) { (i) } )
+#define ATOMIC_INIT(i)  { (i) }
 
 /*
  * This Xtensa implementation assumes that the right mechanism
diff --git a/include/asm-xtensa/bitops.h b/include/asm-xtensa/bitops.h
index d395ef226c32..e76ee889e21d 100644
--- a/include/asm-xtensa/bitops.h
+++ b/include/asm-xtensa/bitops.h
@@ -174,7 +174,7 @@ static __inline__ int test_bit(int nr, const volatile void *addr)
         return 1UL & (((const volatile unsigned int *)addr)[nr>>5] >> (nr&31));
 }
 
-#if XCHAL_HAVE_NSAU
+#if XCHAL_HAVE_NSA
 
 static __inline__ int __cntlz (unsigned long x)
 {
diff --git a/include/asm-xtensa/hardirq.h b/include/asm-xtensa/hardirq.h
index e07c76c36b95..aa9c1adf68d7 100644
--- a/include/asm-xtensa/hardirq.h
+++ b/include/asm-xtensa/hardirq.h
@@ -23,6 +23,7 @@ typedef struct {
         unsigned int __nmi_count;              /* arch dependent */
 } ____cacheline_aligned irq_cpustat_t;
 
+void ack_bad_irq(unsigned int irq);
 #include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
 
 #endif  /* _XTENSA_HARDIRQ_H */
diff --git a/include/asm-xtensa/semaphore.h b/include/asm-xtensa/semaphore.h
index db740b8bc6f0..09e89ab3eb61 100644
--- a/include/asm-xtensa/semaphore.h
+++ b/include/asm-xtensa/semaphore.h
@@ -20,28 +20,19 @@ struct semaphore {
         atomic_t count;
         int sleepers;
         wait_queue_head_t wait;
-#if WAITQUEUE_DEBUG
-        long __magic;
-#endif
 };
 
-#if WAITQUEUE_DEBUG
-# define __SEM_DEBUG_INIT(name) \
-                , (int)&(name).__magic
-#else
-# define __SEM_DEBUG_INIT(name)
-#endif
-
-#define __SEMAPHORE_INITIALIZER(name,count)                     \
-        { ATOMIC_INIT(count),                                   \
-          0,                                                    \
-          __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)            \
-        __SEM_DEBUG_INIT(name) }
+#define __SEMAPHORE_INITIALIZER(name,n)                                 \
+{                                                                       \
+        .count          = ATOMIC_INIT(n),                               \
+        .sleepers       = 0,                                            \
+        .wait           = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)    \
+}
 
-#define __MUTEX_INITIALIZER(name) \
+#define __MUTEX_INITIALIZER(name)                                       \
         __SEMAPHORE_INITIALIZER(name, 1)
 
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)                         \
         struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
 
 #define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
@@ -49,17 +40,8 @@ struct semaphore {
 
 static inline void sema_init (struct semaphore *sem, int val)
 {
-/*
- *      *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
- *
- * i'd rather use the more flexible initialization above, but sadly
- * GCC 2.7.2.3 emits a bogus warning. EGCS doesnt. Oh well.
- */
         atomic_set(&sem->count, val);
         init_waitqueue_head(&sem->wait);
-#if WAITQUEUE_DEBUG
-        sem->__magic = (int)&sem->__magic;
-#endif
 }
 
 static inline void init_MUTEX (struct semaphore *sem)
@@ -81,9 +63,7 @@ extern spinlock_t semaphore_wake_lock;
 
 static inline void down(struct semaphore * sem)
 {
-#if WAITQUEUE_DEBUG
-        CHECK_MAGIC(sem->__magic);
-#endif
+        might_sleep();
 
         if (atomic_sub_return(1, &sem->count) < 0)
                 __down(sem);
@@ -92,9 +72,8 @@ static inline void down(struct semaphore * sem)
 static inline int down_interruptible(struct semaphore * sem)
 {
         int ret = 0;
-#if WAITQUEUE_DEBUG
-        CHECK_MAGIC(sem->__magic);
-#endif
+
+        might_sleep();
 
         if (atomic_sub_return(1, &sem->count) < 0)
                 ret = __down_interruptible(sem);
@@ -104,9 +83,6 @@ static inline int down_interruptible(struct semaphore * sem)
 static inline int down_trylock(struct semaphore * sem)
 {
         int ret = 0;
-#if WAITQUEUE_DEBUG
-        CHECK_MAGIC(sem->__magic);
-#endif
 
         if (atomic_sub_return(1, &sem->count) < 0)
                 ret = __down_trylock(sem);
@@ -119,9 +95,6 @@ static inline int down_trylock(struct semaphore * sem)
  */
 static inline void up(struct semaphore * sem)
 {
-#if WAITQUEUE_DEBUG
-        CHECK_MAGIC(sem->__magic);
-#endif
         if (atomic_add_return(1, &sem->count) <= 0)
                 __up(sem);
 }
diff --git a/include/asm-xtensa/system.h b/include/asm-xtensa/system.h
index f09393232e5e..9284867f1cb9 100644
--- a/include/asm-xtensa/system.h
+++ b/include/asm-xtensa/system.h
@@ -189,20 +189,6 @@ static inline unsigned long xchg_u32(volatile int * m, unsigned long val)
 
 #define tas(ptr) (xchg((ptr),1))
 
-#if ( __XCC__ == 1 )
-
-/* xt-xcc processes __inline__ differently than xt-gcc and decides to
- * insert an out-of-line copy of function __xchg.  This presents the
- * unresolved symbol at link time of __xchg_called_with_bad_pointer,
- * even though such a function would never be called at run-time.
- * xt-gcc always inlines __xchg, and optimizes away the undefined
- * bad_pointer function.
- */
-
-#define xchg(ptr,x) xchg_u32(ptr,x)
-
-#else  /* assume xt-gcc */
-
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
 
 /*
@@ -224,8 +210,6 @@ __xchg(unsigned long x, volatile void * ptr, int size)
         return x;
 }
 
-#endif
-
 extern void set_except_vector(int n, void *addr);
 
 static inline void spill_registers(void)
diff --git a/include/linux/device.h b/include/linux/device.h
index 06e5d42f2c7b..95d607a48f06 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -317,6 +317,11 @@ dev_set_drvdata (struct device *dev, void *data)
         dev->driver_data = data;
 }
 
+static inline int device_is_registered(struct device *dev)
+{
+        return klist_node_attached(&dev->knode_bus);
+}
+
 /*
  * High level routines for use by the bus drivers
  */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 022105c745fc..ceee1fc42c60 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -393,6 +393,7 @@ extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_i
 extern void ata_pci_remove_one (struct pci_dev *pdev);
 #endif /* CONFIG_PCI */
 extern int ata_device_add(struct ata_probe_ent *ent);
+extern void ata_host_set_remove(struct ata_host_set *host_set);
 extern int ata_scsi_detect(Scsi_Host_Template *sht);
 extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
 extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
diff --git a/include/linux/netfilter_ipv4/ip_conntrack.h b/include/linux/netfilter_ipv4/ip_conntrack.h
index bace72a76cc4..4ced38736813 100644
--- a/include/linux/netfilter_ipv4/ip_conntrack.h
+++ b/include/linux/netfilter_ipv4/ip_conntrack.h
@@ -332,11 +332,28 @@ extern void need_ip_conntrack(void);
 extern int invert_tuplepr(struct ip_conntrack_tuple *inverse,
                           const struct ip_conntrack_tuple *orig);
 
+extern void __ip_ct_refresh_acct(struct ip_conntrack *ct,
+                                 enum ip_conntrack_info ctinfo,
+                                 const struct sk_buff *skb,
+                                 unsigned long extra_jiffies,
+                                 int do_acct);
+
+/* Refresh conntrack for this many jiffies and do accounting */
+static inline void ip_ct_refresh_acct(struct ip_conntrack *ct, 
+                                      enum ip_conntrack_info ctinfo,
+                                      const struct sk_buff *skb,
+                                      unsigned long extra_jiffies)
+{
+        __ip_ct_refresh_acct(ct, ctinfo, skb, extra_jiffies, 1);
+}
+
 /* Refresh conntrack for this many jiffies */
-extern void ip_ct_refresh_acct(struct ip_conntrack *ct,
-                               enum ip_conntrack_info ctinfo,
-                               const struct sk_buff *skb,
-                               unsigned long extra_jiffies);
+static inline void ip_ct_refresh(struct ip_conntrack *ct,
+                                 const struct sk_buff *skb,
+                                 unsigned long extra_jiffies)
+{
+        __ip_ct_refresh_acct(ct, 0, skb, extra_jiffies, 0);
+}
 
 /* These are for NAT.  Icky. */
 /* Update TCP window tracking data when NAT mangles the packet */
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_pptp.h b/include/linux/netfilter_ipv4/ip_conntrack_pptp.h
index 389e3851d52f..816144c75de0 100644
--- a/include/linux/netfilter_ipv4/ip_conntrack_pptp.h
+++ b/include/linux/netfilter_ipv4/ip_conntrack_pptp.h
@@ -60,8 +60,8 @@ struct ip_ct_pptp_expect {
 
 struct pptp_pkt_hdr {
         __u16   packetLength;
-        __u16   packetType;
-        __u32   magicCookie;
+        __be16  packetType;
+        __be32  magicCookie;
 };
 
 /* PptpControlMessageType values */
@@ -93,7 +93,7 @@ struct pptp_pkt_hdr {
 #define PPTP_REMOVE_DEVICE_ERROR        6
 
 struct PptpControlHeader {
-        __u16   messageType;
+        __be16  messageType;
         __u16   reserved;
 };
 
@@ -106,13 +106,13 @@ struct PptpControlHeader {
 #define PPTP_BEARER_CAP_DIGITAL         0x2
 
 struct PptpStartSessionRequest {
-        __u16   protocolVersion;
+        __be16  protocolVersion;
         __u8    reserved1;
         __u8    reserved2;
-        __u32   framingCapability;
-        __u32   bearerCapability;
-        __u16   maxChannels;
-        __u16   firmwareRevision;
+        __be32  framingCapability;
+        __be32  bearerCapability;
+        __be16  maxChannels;
+        __be16  firmwareRevision;
         __u8    hostName[64];
         __u8    vendorString[64];
 };
@@ -125,13 +125,13 @@ struct PptpStartSessionRequest {
 #define PPTP_START_UNKNOWN_PROTOCOL     5
 
 struct PptpStartSessionReply {
-        __u16   protocolVersion;
+        __be16  protocolVersion;
         __u8    resultCode;
         __u8    generalErrorCode;
-        __u32   framingCapability;
-        __u32   bearerCapability;
-        __u16   maxChannels;
-        __u16   firmwareRevision;
+        __be32  framingCapability;
+        __be32  bearerCapability;
+        __be16  maxChannels;
+        __be16  firmwareRevision;
         __u8    hostName[64];
         __u8    vendorString[64];
 };
@@ -155,7 +155,7 @@ struct PptpStopSessionReply {
 };
 
 struct PptpEchoRequest {
-        __u32 identNumber;
+        __be32 identNumber;
 };
 
 /* PptpEchoReplyResultCode */
@@ -163,7 +163,7 @@ struct PptpEchoRequest {
 #define PPTP_ECHO_GENERAL_ERROR         2
 
 struct PptpEchoReply {
-        __u32   identNumber;
+        __be32  identNumber;
         __u8    resultCode;
         __u8    generalErrorCode;
         __u16   reserved;
@@ -180,16 +180,16 @@ struct PptpEchoReply {
 #define PPTP_DONT_CARE_BEARER_TYPE      3
 
 struct PptpOutCallRequest {
-        __u16   callID;
-        __u16   callSerialNumber;
-        __u32   minBPS;
-        __u32   maxBPS;
-        __u32   bearerType;
-        __u32   framingType;
-        __u16   packetWindow;
-        __u16   packetProcDelay;
+        __be16  callID;
+        __be16  callSerialNumber;
+        __be32  minBPS;
+        __be32  maxBPS;
+        __be32  bearerType;
+        __be32  framingType;
+        __be16  packetWindow;
+        __be16  packetProcDelay;
         __u16   reserved1;
-        __u16   phoneNumberLength;
+        __be16  phoneNumberLength;
         __u16   reserved2;
         __u8    phoneNumber[64];
         __u8    subAddress[64];
@@ -205,24 +205,24 @@ struct PptpOutCallRequest {
 #define PPTP_OUTCALL_DONT_ACCEPT        7
 
 struct PptpOutCallReply {
-        __u16   callID;
-        __u16   peersCallID;
+        __be16  callID;
+        __be16  peersCallID;
         __u8    resultCode;
         __u8    generalErrorCode;
-        __u16   causeCode;
-        __u32   connectSpeed;
-        __u16   packetWindow;
-        __u16   packetProcDelay;
-        __u32   physChannelID;
+        __be16  causeCode;
+        __be32  connectSpeed;
+        __be16  packetWindow;
+        __be16  packetProcDelay;
+        __be32  physChannelID;
 };
 
 struct PptpInCallRequest {
-        __u16   callID;
-        __u16   callSerialNumber;
-        __u32   callBearerType;
-        __u32   physChannelID;
-        __u16   dialedNumberLength;
-        __u16   dialingNumberLength;
+        __be16  callID;
+        __be16  callSerialNumber;
+        __be32  callBearerType;
+        __be32  physChannelID;
+        __be16  dialedNumberLength;
+        __be16  dialingNumberLength;
         __u8    dialedNumber[64];
         __u8    dialingNumber[64];
         __u8    subAddress[64];
@@ -234,61 +234,54 @@ struct PptpInCallRequest {
 #define PPTP_INCALL_DONT_ACCEPT         3
 
 struct PptpInCallReply {
-        __u16   callID;
-        __u16   peersCallID;
+        __be16  callID;
+        __be16  peersCallID;
         __u8    resultCode;
         __u8    generalErrorCode;
-        __u16   packetWindow;
-        __u16   packetProcDelay;
+        __be16  packetWindow;
+        __be16  packetProcDelay;
         __u16   reserved;
 };
 
 struct PptpInCallConnected {
-        __u16   peersCallID;
+        __be16  peersCallID;
         __u16   reserved;
-        __u32   connectSpeed;
-        __u16   packetWindow;
-        __u16   packetProcDelay;
-        __u32   callFramingType;
+        __be32  connectSpeed;
+        __be16  packetWindow;
+        __be16  packetProcDelay;
+        __be32  callFramingType;
 };
 
 struct PptpClearCallRequest {
-        __u16   callID;
+        __be16  callID;
         __u16   reserved;
 };
 
 struct PptpCallDisconnectNotify {
-        __u16   callID;
+        __be16  callID;
         __u8    resultCode;
         __u8    generalErrorCode;
-        __u16   causeCode;
+        __be16  causeCode;
         __u16   reserved;
         __u8    callStatistics[128];
 };
 
 struct PptpWanErrorNotify {
-        __u16   peersCallID;
+        __be16  peersCallID;
         __u16   reserved;
-        __u32   crcErrors;
-        __u32   framingErrors;
-        __u32   hardwareOverRuns;
-        __u32   bufferOverRuns;
-        __u32   timeoutErrors;
-        __u32   alignmentErrors;
+        __be32  crcErrors;
+        __be32  framingErrors;
+        __be32  hardwareOverRuns;
+        __be32  bufferOverRuns;
+        __be32  timeoutErrors;
+        __be32  alignmentErrors;
 };
 
 struct PptpSetLinkInfo {
-        __u16   peersCallID;
+        __be16  peersCallID;
         __u16   reserved;
-        __u32   sendAccm;
-        __u32   recvAccm;
-};
-
-
-struct pptp_priv_data {
-        __u16   call_id;
-        __u16   mcall_id;
-        __u16   pcall_id;
+        __be32  sendAccm;
+        __be32  recvAccm;
 };
 
 union pptp_ctrl_union {
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_tuple.h b/include/linux/netfilter_ipv4/ip_conntrack_tuple.h
index 14dc0f7b6556..20e43f018b7c 100644
--- a/include/linux/netfilter_ipv4/ip_conntrack_tuple.h
+++ b/include/linux/netfilter_ipv4/ip_conntrack_tuple.h
@@ -17,7 +17,7 @@ union ip_conntrack_manip_proto
         u_int16_t all;
 
         struct {
-                u_int16_t port;
+                __be16 port;
         } tcp;
         struct {
                 u_int16_t port;
@@ -29,7 +29,7 @@ union ip_conntrack_manip_proto
                 u_int16_t port;
         } sctp;
         struct {
-                u_int16_t key;  /* key is 32bit, pptp only uses 16 */
+                __be16 key;     /* key is 32bit, pptp only uses 16 */
         } gre;
 };
 
@@ -65,7 +65,7 @@ struct ip_conntrack_tuple
                                 u_int16_t port;
                         } sctp;
                         struct {
-                                u_int16_t key;  /* key is 32bit, 
+                                __be16 key;     /* key is 32bit, 
                                                  * pptp only uses 16 */
                         } gre;
                 } u;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c49d28eca561..b86a4b77007e 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1268,7 +1268,8 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA  0x0266
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE   0x036E
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA  0x036F
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA  0x037E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F
 #define PCI_DEVICE_ID_NVIDIA_NVENET_12          0x0268
 #define PCI_DEVICE_ID_NVIDIA_NVENET_13          0x0269
 #define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO        0x026B
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index 3b3266ff1a95..7ab2cdb83ef0 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -59,6 +59,10 @@ extern void machine_crash_shutdown(struct pt_regs *);
  * Architecture independent implemenations of sys_reboot commands.
  */
 
+extern void kernel_restart_prepare(char *cmd);
+extern void kernel_halt_prepare(void);
+extern void kernel_power_off_prepare(void);
+
 extern void kernel_restart(char *cmd);
 extern void kernel_halt(void);
 extern void kernel_power_off(void);
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 396c7873e804..46a5e5acff97 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -29,7 +29,7 @@ config PM_DEBUG
 
 config SOFTWARE_SUSPEND
         bool "Software Suspend"
-        depends on PM && SWAP && (X86 || ((FVR || PPC32) && !SMP))
+        depends on PM && SWAP && (X86 && (!SMP || SUSPEND_SMP)) || ((FVR || PPC32) && !SMP)
         ---help---
           Enable the possibility of suspending the machine.
           It doesn't need APM.
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 2d8bf054d036..761956e813f5 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -17,12 +17,12 @@
 #include <linux/delay.h>
 #include <linux/fs.h>
 #include <linux/mount.h>
+#include <linux/pm.h>
 
 #include "power.h"
 
 
 extern suspend_disk_method_t pm_disk_mode;
-extern struct pm_ops * pm_ops;
 
 extern int swsusp_suspend(void);
 extern int swsusp_write(void);
@@ -49,13 +49,11 @@ dev_t swsusp_resume_device;
 
 static void power_down(suspend_disk_method_t mode)
 {
-        unsigned long flags;
         int error = 0;
 
-        local_irq_save(flags);
         switch(mode) {
         case PM_DISK_PLATFORM:
-                device_shutdown();
+                kernel_power_off_prepare();
                 error = pm_ops->enter(PM_SUSPEND_DISK);
                 break;
         case PM_DISK_SHUTDOWN:
diff --git a/kernel/power/power.h b/kernel/power/power.h
index cd6a3493cc0d..9c9167d910dd 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -1,7 +1,7 @@
 #include <linux/suspend.h>
 #include <linux/utsname.h>
 
-/* With SUSPEND_CONSOLE defined, it suspend looks *really* cool, but
+/* With SUSPEND_CONSOLE defined suspend looks *really* cool, but
    we probably do not take enough locks for switching consoles, etc,
    so bad things might happen.
 */
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index d967e875ee82..1cc9ff25e479 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -363,7 +363,7 @@ static void lock_swapdevices(void)
 }
 
 /**
- *      write_swap_page - Write one page to a fresh swap location.
+ *      write_page - Write one page to a fresh swap location.
  *      @addr:  Address we're writing.
  *      @loc:   Place to store the entry we used.
  *
@@ -863,6 +863,9 @@ static int alloc_image_pages(void)
         return 0;
 }
 
+/* Free pages we allocated for suspend. Suspend pages are alocated
+ * before atomic copy, so we need to free them after resume.
+ */
 void swsusp_free(void)
 {
         BUG_ON(PageNosave(virt_to_page(pagedir_save)));
@@ -918,6 +921,7 @@ static int swsusp_alloc(void)
 
         pagedir_nosave = NULL;
         nr_copy_pages = calc_nr(nr_copy_pages);
+        nr_copy_pages_check = nr_copy_pages;
 
         pr_debug("suspend: (pages needed: %d + %d free: %d)\n",
                  nr_copy_pages, PAGES_FOR_IO, nr_free_pages());
@@ -940,7 +944,6 @@ static int swsusp_alloc(void)
                 return error;
         }
 
-        nr_copy_pages_check = nr_copy_pages;
         return 0;
 }
 
@@ -1213,8 +1216,9 @@ static struct pbe * swsusp_pagedir_relocate(struct pbe *pblist)
                 free_pagedir(pblist);
                 free_eaten_memory();
                 pblist = NULL;
-        }
-        else
+                /* Is this even worth handling? It should never ever happen, and we
+                   have just lost user's state, anyway... */
+        } else
                 printk("swsusp: Relocated %d pages\n", rel);
 
         return pblist;
diff --git a/kernel/signal.c b/kernel/signal.c
index b92c3c9f8b9a..5a274705ba19 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -936,34 +936,31 @@ force_sig_specific(int sig, struct task_struct *t)
  * as soon as they're available, so putting the signal on the shared queue
  * will be equivalent to sending it to one such thread.
  */
-#define wants_signal(sig, p, mask)                      \
-        (!sigismember(&(p)->blocked, sig)               \
-         && !((p)->state & mask)                        \
-         && !((p)->flags & PF_EXITING)                  \
-         && (task_curr(p) || !signal_pending(p)))
-
+static inline int wants_signal(int sig, struct task_struct *p)
+{
+        if (sigismember(&p->blocked, sig))
+                return 0;
+        if (p->flags & PF_EXITING)
+                return 0;
+        if (sig == SIGKILL)
+                return 1;
+        if (p->state & (TASK_STOPPED | TASK_TRACED))
+                return 0;
+        return task_curr(p) || !signal_pending(p);
+}
 
 static void
 __group_complete_signal(int sig, struct task_struct *p)
 {
-        unsigned int mask;
         struct task_struct *t;
 
         /*
-         * Don't bother traced and stopped tasks (but
-         * SIGKILL will punch through that).
-         */
-        mask = TASK_STOPPED | TASK_TRACED;
-        if (sig == SIGKILL)
-                mask = 0;
-
-        /*
          * Now find a thread we can wake up to take the signal off the queue.
          *
          * If the main thread wants the signal, it gets first crack.
          * Probably the least surprising to the average bear.
          */
-        if (wants_signal(sig, p, mask))
+        if (wants_signal(sig, p))
                 t = p;
         else if (thread_group_empty(p))
                 /*
@@ -981,7 +978,7 @@ __group_complete_signal(int sig, struct task_struct *p)
                         t = p->signal->curr_target = p;
                 BUG_ON(t->tgid != p->tgid);
 
-                while (!wants_signal(sig, t, mask)) {
+                while (!wants_signal(sig, t)) {
                         t = next_thread(t);
                         if (t == p->signal->curr_target)
                                 /*
diff --git a/kernel/sys.c b/kernel/sys.c
index f723522e6986..2fa1ed18123c 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -361,17 +361,35 @@ out_unlock:
         return retval;
 }
 
+/**
+ *      emergency_restart - reboot the system
+ *
+ *      Without shutting down any hardware or taking any locks
+ *      reboot the system.  This is called when we know we are in
+ *      trouble so this is our best effort to reboot.  This is
+ *      safe to call in interrupt context.
+ */
 void emergency_restart(void)
 {
         machine_emergency_restart();
 }
 EXPORT_SYMBOL_GPL(emergency_restart);
 
-void kernel_restart(char *cmd)
+/**
+ *      kernel_restart - reboot the system
+ *
+ *      Shutdown everything and perform a clean reboot.
+ *      This is not safe to call in interrupt context.
+ */
+void kernel_restart_prepare(char *cmd)
 {
         notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
         system_state = SYSTEM_RESTART;
         device_shutdown();
+}
+void kernel_restart(char *cmd)
+{
+        kernel_restart_prepare(cmd);
         if (!cmd) {
                 printk(KERN_EMERG "Restarting system.\n");
         } else {
@@ -382,6 +400,12 @@ void kernel_restart(char *cmd)
 }
 EXPORT_SYMBOL_GPL(kernel_restart);
 
+/**
+ *      kernel_kexec - reboot the system
+ *
+ *      Move into place and start executing a preloaded standalone
+ *      executable.  If nothing was preloaded return an error.
+ */
 void kernel_kexec(void)
 {
 #ifdef CONFIG_KEXEC
@@ -390,9 +414,7 @@ void kernel_kexec(void)
         if (!image) {
                 return;
         }
-        notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL);
-        system_state = SYSTEM_RESTART;
-        device_shutdown();
+        kernel_restart_prepare(NULL);
         printk(KERN_EMERG "Starting new kernel\n");
         machine_shutdown();
         machine_kexec(image);
@@ -400,21 +422,39 @@ void kernel_kexec(void)
 }
 EXPORT_SYMBOL_GPL(kernel_kexec);
 
-void kernel_halt(void)
+/**
+ *      kernel_halt - halt the system
+ *
+ *      Shutdown everything and perform a clean system halt.
+ */
+void kernel_halt_prepare(void)
 {
         notifier_call_chain(&reboot_notifier_list, SYS_HALT, NULL);
         system_state = SYSTEM_HALT;
         device_shutdown();
+}
+void kernel_halt(void)
+{
+        kernel_halt_prepare();
         printk(KERN_EMERG "System halted.\n");
         machine_halt();
 }
 EXPORT_SYMBOL_GPL(kernel_halt);
 
-void kernel_power_off(void)
+/**
+ *      kernel_power_off - power_off the system
+ *
+ *      Shutdown everything and perform a clean system power_off.
+ */
+void kernel_power_off_prepare(void)
 {
         notifier_call_chain(&reboot_notifier_list, SYS_POWER_OFF, NULL);
         system_state = SYSTEM_POWER_OFF;
         device_shutdown();
+}
+void kernel_power_off(void)
+{
+        kernel_power_off_prepare();
         printk(KERN_EMERG "Power down.\n");
         machine_power_off();
 }
diff --git a/mm/slab.c b/mm/slab.c
index 437d3388054b..c9adfce00405 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -308,12 +308,12 @@ struct kmem_list3 __initdata initkmem_list3[NUM_INIT_LISTS];
 #define SIZE_L3 (1 + MAX_NUMNODES)
 
 /*
- * This function may be completely optimized away if
+ * This function must be completely optimized away if
  * a constant is passed to it. Mostly the same as
  * what is in linux/slab.h except it returns an
  * index.
  */
-static inline int index_of(const size_t size)
+static __always_inline int index_of(const size_t size)
 {
         if (__builtin_constant_p(size)) {
                 int i = 0;
@@ -329,7 +329,8 @@ static inline int index_of(const size_t size)
                         extern void __bad_size(void);
                         __bad_size();
                 }
-        }
+        } else
+                BUG();
         return 0;
 }
 
@@ -639,7 +640,7 @@ static enum {
 
 static DEFINE_PER_CPU(struct work_struct, reap_work);
 
-static void free_block(kmem_cache_t* cachep, void** objpp, int len);
+static void free_block(kmem_cache_t* cachep, void** objpp, int len, int node);
 static void enable_cpucache (kmem_cache_t *cachep);
 static void cache_reap (void *unused);
 static int __node_shrink(kmem_cache_t *cachep, int node);
@@ -804,7 +805,7 @@ static inline void __drain_alien_cache(kmem_cache_t *cachep, struct array_cache
 
         if (ac->avail) {
                 spin_lock(&rl3->list_lock);
-                free_block(cachep, ac->entry, ac->avail);
+                free_block(cachep, ac->entry, ac->avail, node);
                 ac->avail = 0;
                 spin_unlock(&rl3->list_lock);
         }
@@ -925,7 +926,7 @@ static int __devinit cpuup_callback(struct notifier_block *nfb,
                         /* Free limit for this kmem_list3 */
                         l3->free_limit -= cachep->batchcount;
                         if (nc)
-                                free_block(cachep, nc->entry, nc->avail);
+                                free_block(cachep, nc->entry, nc->avail, node);
 
                         if (!cpus_empty(mask)) {
                                 spin_unlock(&l3->list_lock);
@@ -934,7 +935,7 @@ static int __devinit cpuup_callback(struct notifier_block *nfb,
 
                         if (l3->shared) {
                                 free_block(cachep, l3->shared->entry,
-                                                l3->shared->avail);
+                                                l3->shared->avail, node);
                                 kfree(l3->shared);
                                 l3->shared = NULL;
                         }
@@ -1882,12 +1883,13 @@ static void do_drain(void *arg)
 {
         kmem_cache_t *cachep = (kmem_cache_t*)arg;
         struct array_cache *ac;
+        int node = numa_node_id();
 
         check_irq_off();
         ac = ac_data(cachep);
-        spin_lock(&cachep->nodelists[numa_node_id()]->list_lock);
-        free_block(cachep, ac->entry, ac->avail);
-        spin_unlock(&cachep->nodelists[numa_node_id()]->list_lock);
+        spin_lock(&cachep->nodelists[node]->list_lock);
+        free_block(cachep, ac->entry, ac->avail, node);
+        spin_unlock(&cachep->nodelists[node]->list_lock);
         ac->avail = 0;
 }
 
@@ -2608,7 +2610,7 @@ done:
 /*
  * Caller needs to acquire correct kmem_list's list_lock
  */
-static void free_block(kmem_cache_t *cachep, void **objpp, int nr_objects)
+static void free_block(kmem_cache_t *cachep, void **objpp, int nr_objects, int node)
 {
         int i;
         struct kmem_list3 *l3;
@@ -2617,14 +2619,12 @@ static void free_block(kmem_cache_t *cachep, void **objpp, int nr_objects)
                 void *objp = objpp[i];
                 struct slab *slabp;
                 unsigned int objnr;
-                int nodeid = 0;
 
                 slabp = GET_PAGE_SLAB(virt_to_page(objp));
-                nodeid = slabp->nodeid;
-                l3 = cachep->nodelists[nodeid];
+                l3 = cachep->nodelists[node];
                 list_del(&slabp->list);
                 objnr = (objp - slabp->s_mem) / cachep->objsize;
-                check_spinlock_acquired_node(cachep, nodeid);
+                check_spinlock_acquired_node(cachep, node);
                 check_slabp(cachep, slabp);
 
 
@@ -2664,13 +2664,14 @@ static void cache_flusharray(kmem_cache_t *cachep, struct array_cache *ac)
 {
         int batchcount;
         struct kmem_list3 *l3;
+        int node = numa_node_id();
 
         batchcount = ac->batchcount;
 #if DEBUG
         BUG_ON(!batchcount || batchcount > ac->avail);
 #endif
         check_irq_off();
-        l3 = cachep->nodelists[numa_node_id()];
+        l3 = cachep->nodelists[node];
         spin_lock(&l3->list_lock);
         if (l3->shared) {
                 struct array_cache *shared_array = l3->shared;
@@ -2686,7 +2687,7 @@ static void cache_flusharray(kmem_cache_t *cachep, struct array_cache *ac)
                 }
         }
 
-        free_block(cachep, ac->entry, batchcount);
+        free_block(cachep, ac->entry, batchcount, node);
 free_done:
 #if STATS
         {
@@ -2751,7 +2752,7 @@ static inline void __cache_free(kmem_cache_t *cachep, void *objp)
                         } else {
                                 spin_lock(&(cachep->nodelists[nodeid])->
                                                 list_lock);
-                                free_block(cachep, &objp, 1);
+                                free_block(cachep, &objp, 1, nodeid);
                                 spin_unlock(&(cachep->nodelists[nodeid])->
                                                 list_lock);
                         }
@@ -2844,7 +2845,7 @@ void *kmem_cache_alloc_node(kmem_cache_t *cachep, unsigned int __nocast flags, i
         unsigned long save_flags;
         void *ptr;
 
-        if (nodeid == numa_node_id() || nodeid == -1)
+        if (nodeid == -1)
                 return __cache_alloc(cachep, flags);
 
         if (unlikely(!cachep->nodelists[nodeid])) {
@@ -3079,7 +3080,7 @@ static int alloc_kmemlist(kmem_cache_t *cachep)
 
                         if ((nc = cachep->nodelists[node]->shared))
                                 free_block(cachep, nc->entry,
-                                                        nc->avail);
+                                                        nc->avail, node);
 
                         l3->shared = new;
                         if (!cachep->nodelists[node]->alien) {
@@ -3160,7 +3161,7 @@ static int do_tune_cpucache(kmem_cache_t *cachep, int limit, int batchcount,
                 if (!ccold)
                         continue;
                 spin_lock_irq(&cachep->nodelists[cpu_to_node(i)]->list_lock);
-                free_block(cachep, ccold->entry, ccold->avail);
+                free_block(cachep, ccold->entry, ccold->avail, cpu_to_node(i));
                 spin_unlock_irq(&cachep->nodelists[cpu_to_node(i)]->list_lock);
                 kfree(ccold);
         }
@@ -3240,7 +3241,7 @@ static void drain_array_locked(kmem_cache_t *cachep,
                 if (tofree > ac->avail) {
                         tofree = (ac->avail+1)/2;
                 }
-                free_block(cachep, ac->entry, tofree);
+                free_block(cachep, ac->entry, tofree, node);
                 ac->avail -= tofree;
                 memmove(ac->entry, &(ac->entry[tofree]),
                                         sizeof(void*)*ac->avail);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 0184f510aace..1dcaeda039f4 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1381,6 +1381,7 @@ asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
                 error = bd_claim(bdev, sys_swapon);
                 if (error < 0) {
                         bdev = NULL;
+                        error = -EINVAL;
                         goto bad_swap;
                 }
                 p->old_block_size = block_size(bdev);
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index 069253f830c1..2d24fb400e0c 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -31,7 +31,8 @@ static inline int should_deliver(const struct net_bridge_port *p,
 
 int br_dev_queue_push_xmit(struct sk_buff *skb)
 {
-        if (skb->len > skb->dev->mtu) 
+        /* drop mtu oversized packets except tso */
+        if (skb->len > skb->dev->mtu && !skb_shinfo(skb)->tso_size)
                 kfree_skb(skb);
         else {
 #ifdef CONFIG_BRIDGE_NETFILTER
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 39fc55edf691..5f160082aafc 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -61,7 +61,9 @@ static int pneigh_ifdown(struct neigh_table *tbl, struct net_device *dev);
 void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev);
 
 static struct neigh_table *neigh_tables;
+#ifdef CONFIG_PROC_FS
 static struct file_operations neigh_stat_seq_fops;
+#endif
 
 /*
    Neighbour hash table buckets are protected with rwlock tbl->lock.
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 3cf9b451675c..2cd7e7d1ac90 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -537,6 +537,17 @@ config IP_NF_TARGET_TCPMSS
 
           To compile it as a module, choose M here.  If unsure, say N.
 
+config IP_NF_TARGET_NFQUEUE
+        tristate "NFQUEUE Target Support"
+        depends on IP_NF_IPTABLES
+        help
+          This Target replaced the old obsolete QUEUE target.
+
+          As opposed to QUEUE, it supports 65535 different queues,
+          not just one.
+
+          To compile it as a module, choose M here.  If unsure, say N.
+
 # NAT + specific targets
 config IP_NF_NAT
         tristate "Full NAT"
diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile
index 3d45d3c0283c..89002533f2a2 100644
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_IP_NF_TARGET_TCPMSS) += ipt_TCPMSS.o
 obj-$(CONFIG_IP_NF_TARGET_NOTRACK) += ipt_NOTRACK.o
 obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
 obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
+obj-$(CONFIG_IP_NF_TARGET_NFQUEUE) += ipt_NFQUEUE.o
 
 # generic ARP tables
 obj-$(CONFIG_IP_NF_ARPTABLES) += arp_tables.o
@@ -101,4 +102,3 @@ obj-$(CONFIG_IP_NF_ARP_MANGLE) += arpt_mangle.o
 obj-$(CONFIG_IP_NF_ARPFILTER) += arptable_filter.o
 
 obj-$(CONFIG_IP_NF_QUEUE) += ip_queue.o
-obj-$(CONFIG_NETFILTER_NETLINK_QUEUE) += ipt_NFQUEUE.o
diff --git a/net/ipv4/netfilter/ip_conntrack_amanda.c b/net/ipv4/netfilter/ip_conntrack_amanda.c
index dc20881004bc..fa3f914117ec 100644
--- a/net/ipv4/netfilter/ip_conntrack_amanda.c
+++ b/net/ipv4/netfilter/ip_conntrack_amanda.c
@@ -65,7 +65,7 @@ static int help(struct sk_buff **pskb,
 
         /* increase the UDP timeout of the master connection as replies from
          * Amanda clients to the server can be quite delayed */
-        ip_ct_refresh_acct(ct, ctinfo, NULL, master_timeout * HZ);
+        ip_ct_refresh(ct, *pskb, master_timeout * HZ);
 
         /* No data? */
         dataoff = (*pskb)->nh.iph->ihl*4 + sizeof(struct udphdr);
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index c1f82e0c81cf..ea65dd3e517a 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++ b/net/ipv4/netfilter/ip_conntrack_core.c
@@ -1112,45 +1112,46 @@ void ip_conntrack_helper_unregister(struct ip_conntrack_helper *me)
         synchronize_net();
 }
 
-static inline void ct_add_counters(struct ip_conntrack *ct,
-                                   enum ip_conntrack_info ctinfo,
-                                   const struct sk_buff *skb)
-{
-#ifdef CONFIG_IP_NF_CT_ACCT
-        if (skb) {
-                ct->counters[CTINFO2DIR(ctinfo)].packets++;
-                ct->counters[CTINFO2DIR(ctinfo)].bytes += 
-                                        ntohs(skb->nh.iph->tot_len);
-        }
-#endif
-}
-
-/* Refresh conntrack for this many jiffies and do accounting (if skb != NULL) */
-void ip_ct_refresh_acct(struct ip_conntrack *ct, 
+/* Refresh conntrack for this many jiffies and do accounting if do_acct is 1 */
+void __ip_ct_refresh_acct(struct ip_conntrack *ct, 
                         enum ip_conntrack_info ctinfo,
                         const struct sk_buff *skb,
-                        unsigned long extra_jiffies)
+                        unsigned long extra_jiffies,
+                        int do_acct)
 {
+        int do_event = 0;
+
         IP_NF_ASSERT(ct->timeout.data == (unsigned long)ct);
+        IP_NF_ASSERT(skb);
+
+        write_lock_bh(&ip_conntrack_lock);
 
         /* If not in hash table, timer will not be active yet */
         if (!is_confirmed(ct)) {
                 ct->timeout.expires = extra_jiffies;
-                ct_add_counters(ct, ctinfo, skb);
+                do_event = 1;
         } else {
-                write_lock_bh(&ip_conntrack_lock);
                 /* Need del_timer for race avoidance (may already be dying). */
                 if (del_timer(&ct->timeout)) {
                         ct->timeout.expires = jiffies + extra_jiffies;
                         add_timer(&ct->timeout);
-                        /* FIXME: We loose some REFRESH events if this function
-                         * is called without an skb.  I'll fix this later -HW */
-                        if (skb)
-                                ip_conntrack_event_cache(IPCT_REFRESH, skb);
+                        do_event = 1;
                 }
-                ct_add_counters(ct, ctinfo, skb);
-                write_unlock_bh(&ip_conntrack_lock);
         }
+
+#ifdef CONFIG_IP_NF_CT_ACCT
+        if (do_acct) {
+                ct->counters[CTINFO2DIR(ctinfo)].packets++;
+                ct->counters[CTINFO2DIR(ctinfo)].bytes += 
+                                                ntohs(skb->nh.iph->tot_len);
+        }
+#endif
+
+        write_unlock_bh(&ip_conntrack_lock);
+
+        /* must be unlocked when calling event cache */
+        if (do_event)
+                ip_conntrack_event_cache(IPCT_REFRESH, skb);
 }
 
 #if defined(CONFIG_IP_NF_CONNTRACK_NETLINK) || \
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
index 79db5b70d5f6..926a6684643d 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
@@ -172,7 +172,6 @@ static int destroy_sibling_or_exp(const struct ip_conntrack_tuple *t)
                 DEBUGP("setting timeout of conntrack %p to 0\n", sibling);
                 sibling->proto.gre.timeout = 0;
                 sibling->proto.gre.stream_timeout = 0;
-                /* refresh_acct will not modify counters if skb == NULL */
                 if (del_timer(&sibling->timeout))
                         sibling->timeout.function((unsigned long)sibling);
                 ip_conntrack_put(sibling);
@@ -223,8 +222,8 @@ static void pptp_destroy_siblings(struct ip_conntrack *ct)
 static inline int
 exp_gre(struct ip_conntrack *master,
         u_int32_t seq,
-        u_int16_t callid,
-        u_int16_t peer_callid)
+        __be16 callid,
+        __be16 peer_callid)
 {
         struct ip_conntrack_tuple inv_tuple;
         struct ip_conntrack_tuple exp_tuples[] = {
@@ -263,7 +262,7 @@ exp_gre(struct ip_conntrack *master,
         exp_orig->mask.src.ip = 0xffffffff;
         exp_orig->mask.src.u.all = 0;
         exp_orig->mask.dst.u.all = 0;
-        exp_orig->mask.dst.u.gre.key = 0xffff;
+        exp_orig->mask.dst.u.gre.key = htons(0xffff);
         exp_orig->mask.dst.ip = 0xffffffff;
         exp_orig->mask.dst.protonum = 0xff;
                 
@@ -340,7 +339,8 @@ pptp_inbound_pkt(struct sk_buff **pskb,
         unsigned int reqlen;
         union pptp_ctrl_union _pptpReq, *pptpReq;
         struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
-        u_int16_t msg, *cid, *pcid;
+        u_int16_t msg;
+        __be16 *cid, *pcid;
         u_int32_t seq;  
 
         ctlh = skb_header_pointer(*pskb, nexthdr_off, sizeof(_ctlh), &_ctlh);
@@ -485,7 +485,7 @@ pptp_inbound_pkt(struct sk_buff **pskb,
 
                 if (info->pns_call_id != ntohs(*pcid)) {
                         DEBUGP("%s for unknown CallID %u\n", 
-                                pptp_msg_name[msg], ntohs(*cid));
+                                pptp_msg_name[msg], ntohs(*pcid));
                         break;
                 }
 
@@ -551,7 +551,8 @@ pptp_outbound_pkt(struct sk_buff **pskb,
         unsigned int reqlen;
         union pptp_ctrl_union _pptpReq, *pptpReq;
         struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
-        u_int16_t msg, *cid, *pcid;
+        u_int16_t msg;
+        __be16 *cid, *pcid;
 
         ctlh = skb_header_pointer(*pskb, nexthdr_off, sizeof(_ctlh), &_ctlh);
         if (!ctlh)
@@ -755,7 +756,7 @@ static struct ip_conntrack_helper pptp = {
                           } 
                  },
         .mask = { .src = { .ip = 0, 
-                           .u = { .tcp = { .port = 0xffff } } 
+                           .u = { .tcp = { .port = __constant_htons(0xffff) } } 
                          }, 
                   .dst = { .ip = 0, 
                            .u = { .all = 0 },
diff --git a/net/ipv4/netfilter/ip_conntrack_netbios_ns.c b/net/ipv4/netfilter/ip_conntrack_netbios_ns.c
index 71ef19d126d0..577bac22dcc6 100644
--- a/net/ipv4/netfilter/ip_conntrack_netbios_ns.c
+++ b/net/ipv4/netfilter/ip_conntrack_netbios_ns.c
@@ -91,7 +91,7 @@ static int help(struct sk_buff **pskb,
         ip_conntrack_expect_related(exp);
         ip_conntrack_expect_put(exp);
 
-        ip_ct_refresh_acct(ct, ctinfo, NULL, timeout * HZ);
+        ip_ct_refresh(ct, *pskb, timeout * HZ);
 out:
         return NF_ACCEPT;
 }
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_gre.c b/net/ipv4/netfilter/ip_conntrack_proto_gre.c
index de3cb9db6f85..744abb9d377a 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_gre.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_gre.c
@@ -247,6 +247,7 @@ static int gre_packet(struct ip_conntrack *ct,
                                    ct->proto.gre.stream_timeout);
                 /* Also, more likely to be important, and not a probe. */
                 set_bit(IPS_ASSURED_BIT, &ct->status);
+                ip_conntrack_event_cache(IPCT_STATUS, skb);
         } else
                 ip_ct_refresh_acct(ct, conntrackinfo, skb,
                                    ct->proto.gre.timeout);
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
index a875f35e576d..59a4a0111dd3 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
@@ -416,6 +416,7 @@ static int sctp_packet(struct ip_conntrack *conntrack,
                 && newconntrack == SCTP_CONNTRACK_ESTABLISHED) {
                 DEBUGP("Setting assured bit\n");
                 set_bit(IPS_ASSURED_BIT, &conntrack->status);
+                ip_conntrack_event_cache(IPCT_STATUS, skb);
         }
 
         return NF_ACCEPT;
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
index 1985abc59d24..121760d6cc50 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
@@ -1014,7 +1014,8 @@ static int tcp_packet(struct ip_conntrack *conntrack,
                 /* Set ASSURED if we see see valid ack in ESTABLISHED 
                    after SYN_RECV or a valid answer for a picked up 
                    connection. */
-                        set_bit(IPS_ASSURED_BIT, &conntrack->status);
+                set_bit(IPS_ASSURED_BIT, &conntrack->status);
+                ip_conntrack_event_cache(IPCT_STATUS, skb);
         }
         ip_ct_refresh_acct(conntrack, ctinfo, skb, timeout);
 
diff --git a/net/ipv4/netfilter/ip_conntrack_standalone.c b/net/ipv4/netfilter/ip_conntrack_standalone.c
index d3c7808010ec..dd476b191f4b 100644
--- a/net/ipv4/netfilter/ip_conntrack_standalone.c
+++ b/net/ipv4/netfilter/ip_conntrack_standalone.c
@@ -989,7 +989,7 @@ EXPORT_SYMBOL(need_ip_conntrack);
 EXPORT_SYMBOL(ip_conntrack_helper_register);
 EXPORT_SYMBOL(ip_conntrack_helper_unregister);
 EXPORT_SYMBOL(ip_ct_iterate_cleanup);
-EXPORT_SYMBOL(ip_ct_refresh_acct);
+EXPORT_SYMBOL(__ip_ct_refresh_acct);
 
 EXPORT_SYMBOL(ip_conntrack_expect_alloc);
 EXPORT_SYMBOL(ip_conntrack_expect_put);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 5dd6dd7d091e..d6e3d269e906 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -509,7 +509,16 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss
                         tp->lost_out -= diff;
                         tp->left_out -= diff;
                 }
+
                 if (diff > 0) {
+                        /* Adjust Reno SACK estimate. */
+                        if (!tp->rx_opt.sack_ok) {
+                                tp->sacked_out -= diff;
+                                if ((int)tp->sacked_out < 0)
+                                        tp->sacked_out = 0;
+                                tcp_sync_left_out(tp);
+                        }
+
                         tp->fackets_out -= diff;
                         if ((int)tp->fackets_out < 0)
                                 tp->fackets_out = 0;
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index 216fbe1ac65c..bb7ccfe33f23 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -209,6 +209,17 @@ config IP6_NF_TARGET_REJECT
 
           To compile it as a module, choose M here.  If unsure, say N.
 
+config IP6_NF_TARGET_NFQUEUE
+        tristate "NFQUEUE Target Support"
+        depends on IP_NF_IPTABLES
+        help
+          This Target replaced the old obsolete QUEUE target.
+
+          As opposed to QUEUE, it supports 65535 different queues,
+          not just one.
+
+          To compile it as a module, choose M here.  If unsure, say N.
+
 #  if [ "$CONFIG_IP6_NF_FILTER" != "n" ]; then
 #    dep_tristate '    REJECT target support' CONFIG_IP6_NF_TARGET_REJECT $CONFIG_IP6_NF_FILTER
 #    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
index bd9a16a5cbba..2b2c370e8b1c 100644
--- a/net/ipv6/netfilter/Makefile
+++ b/net/ipv6/netfilter/Makefile
@@ -21,9 +21,9 @@ obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
 obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
 obj-$(CONFIG_IP6_NF_TARGET_MARK) += ip6t_MARK.o
 obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o
+obj-$(CONFIG_IP6_NF_TARGET_NFQUEUE) += ip6t_NFQUEUE.o
 obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
 obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o
 obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
 obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o
 obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o
-obj-$(CONFIG_NETFILTER_NETLINK_QUEUE) += ip6t_NFQUEUE.o
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index 6602d901f8b1..8aff254cb418 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -38,7 +38,7 @@
 #include <net/irda/parameters.h>
 #include <net/irda/irttp.h>
 
-static struct irttp_cb *irttp = NULL;
+static struct irttp_cb *irttp;
 
 static void __irttp_close_tsap(struct tsap_cb *self);
 
@@ -86,12 +86,9 @@ static pi_param_info_t param_info = { pi_major_call_table, 1, 0x0f, 4 };
  */
 int __init irttp_init(void)
 {
-        /* Initialize the irttp structure. */
-        if (irttp == NULL) {
-                irttp = kmalloc(sizeof(struct irttp_cb), GFP_KERNEL);
-                if (irttp == NULL)
-                        return -ENOMEM;
-        }
+        irttp = kmalloc(sizeof(struct irttp_cb), GFP_KERNEL);
+        if (irttp == NULL)
+                return -ENOMEM;
         memset(irttp, 0, sizeof(struct irttp_cb));
 
         irttp->magic = TTP_MAGIC;
@@ -100,6 +97,7 @@ int __init irttp_init(void)
         if (!irttp->tsaps) {
                 IRDA_ERROR("%s: can't allocate IrTTP hashbin!\n",
                            __FUNCTION__);
+                kfree(irttp);
                 return -ENOMEM;
         }
 
@@ -115,7 +113,6 @@ int __init irttp_init(void)
 void __exit irttp_cleanup(void) 
 {
         /* Check for main structure */
-        IRDA_ASSERT(irttp != NULL, return;);
         IRDA_ASSERT(irttp->magic == TTP_MAGIC, return;);
 
         /*
@@ -382,7 +379,6 @@ struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify)
         struct lsap_cb *lsap;
         notify_t ttp_notify;
 
-        IRDA_ASSERT(irttp != NULL, return NULL;);
         IRDA_ASSERT(irttp->magic == TTP_MAGIC, return NULL;);
 
         /* The IrLMP spec (IrLMP 1.1 p10) says that we have the right to
@@ -1880,8 +1876,6 @@ static int irttp_seq_open(struct inode *inode, struct file *file)
         struct seq_file *seq;
         int rc = -ENOMEM;
         struct irttp_iter_state *s;
-       
-        IRDA_ASSERT(irttp != NULL, return -EINVAL;);
 
         s = kmalloc(sizeof(*s), GFP_KERNEL);
         if (!s)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 86073df418f5..505c7de10c50 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -2414,6 +2414,17 @@ sctp_disposition_t sctp_sf_do_9_2_shutdown(const struct sctp_endpoint *ep,
         skb_pull(chunk->skb, sizeof(sctp_shutdownhdr_t));
         chunk->subh.shutdown_hdr = sdh;
 
+        /* API 5.3.1.5 SCTP_SHUTDOWN_EVENT
+         * When a peer sends a SHUTDOWN, SCTP delivers this notification to
+         * inform the application that it should cease sending data.
+         */
+        ev = sctp_ulpevent_make_shutdown_event(asoc, 0, GFP_ATOMIC);
+        if (!ev) {
+                disposition = SCTP_DISPOSITION_NOMEM;
+                goto out;       
+        }
+        sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
+
         /* Upon the reception of the SHUTDOWN, the peer endpoint shall
          *  - enter the SHUTDOWN-RECEIVED state,
          *  - stop accepting new data from its SCTP user
@@ -2439,17 +2450,6 @@ sctp_disposition_t sctp_sf_do_9_2_shutdown(const struct sctp_endpoint *ep,
         sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_CTSN,
                         SCTP_U32(chunk->subh.shutdown_hdr->cum_tsn_ack));
 
-        /* API 5.3.1.5 SCTP_SHUTDOWN_EVENT
-         * When a peer sends a SHUTDOWN, SCTP delivers this notification to
-         * inform the application that it should cease sending data.
-         */
-        ev = sctp_ulpevent_make_shutdown_event(asoc, 0, GFP_ATOMIC);
-        if (!ev) {
-                disposition = SCTP_DISPOSITION_NOMEM;
-                goto out;       
-        }
-        sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
-
 out:
         return disposition;
 }
diff --git a/sound/oss/au1000.c b/sound/oss/au1000.c
index 4491733c9e4e..2c2ae2ee01ac 100644
--- a/sound/oss/au1000.c
+++ b/sound/oss/au1000.c
@@ -1295,7 +1295,7 @@ static int au1000_mmap(struct file *file, struct vm_area_struct *vma)
         unsigned long   size;
         int ret = 0;
 
-        dbg(__FUNCTION__);
+        dbg("%s", __FUNCTION__);
     
         lock_kernel();
         down(&s->sem);
diff --git a/sound/oss/ite8172.c b/sound/oss/ite8172.c
index 58f879fda975..26e5944b6ba8 100644
--- a/sound/oss/ite8172.c
+++ b/sound/oss/ite8172.c
@@ -1859,7 +1859,7 @@ static int it8172_release(struct inode *inode, struct file *file)
         struct it8172_state *s = (struct it8172_state *)file->private_data;
 
 #ifdef IT8172_VERBOSE_DEBUG
-        dbg(__FUNCTION__);
+        dbg("%s", __FUNCTION__);
 #endif
         lock_kernel();
         if (file->f_mode & FMODE_WRITE)
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index 8a59598167f9..c1a239a4dac6 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -405,7 +405,7 @@ static int snd_atiixp_acquire_codec(atiixp_t *chip)
 
         while (atiixp_read(chip, PHYS_OUT_ADDR) & ATI_REG_PHYS_OUT_ADDR_EN) {
                 if (! timeout--) {
-                        snd_printk(KERN_WARNING "atiixp: codec acquire timeout\n");
+                        snd_printk(KERN_WARNING "atiixp-modem: codec acquire timeout\n");
                         return -EBUSY;
                 }
                 udelay(1);
@@ -436,7 +436,7 @@ static unsigned short snd_atiixp_codec_read(atiixp_t *chip, unsigned short codec
         } while (--timeout);
         /* time out may happen during reset */
         if (reg < 0x7c)
-                snd_printk(KERN_WARNING "atiixp: codec read timeout (reg %x)\n", reg);
+                snd_printk(KERN_WARNING "atiixp-modem: codec read timeout (reg %x)\n", reg);
         return 0xffff;
 }
 
@@ -498,7 +498,7 @@ static int snd_atiixp_aclink_reset(atiixp_t *chip)
                 do_delay();
                 atiixp_update(chip, CMD, ATI_REG_CMD_AC_RESET, ATI_REG_CMD_AC_RESET);
                 if (--timeout) {
-                        snd_printk(KERN_ERR "atiixp: codec reset timeout\n");
+                        snd_printk(KERN_ERR "atiixp-modem: codec reset timeout\n");
                         break;
                 }
         }
@@ -552,7 +552,7 @@ static int snd_atiixp_codec_detect(atiixp_t *chip)
         atiixp_write(chip, IER, 0); /* disable irqs */
 
         if ((chip->codec_not_ready_bits & ALL_CODEC_NOT_READY) == ALL_CODEC_NOT_READY) {
-                snd_printk(KERN_ERR "atiixp: no codec detected!\n");
+                snd_printk(KERN_ERR "atiixp-modem: no codec detected!\n");
                 return -ENXIO;
         }
         return 0;
@@ -635,7 +635,7 @@ static void snd_atiixp_xrun_dma(atiixp_t *chip, atiixp_dma_t *dma)
 {
         if (! dma->substream || ! dma->running)
                 return;
-        snd_printdd("atiixp: XRUN detected (DMA %d)\n", dma->ops->type);
+        snd_printdd("atiixp-modem: XRUN detected (DMA %d)\n", dma->ops->type);
         snd_pcm_stop(dma->substream, SNDRV_PCM_STATE_XRUN);
 }
 
@@ -1081,14 +1081,14 @@ static int __devinit snd_atiixp_mixer_new(atiixp_t *chip, int clock)
                 ac97.scaps = AC97_SCAP_SKIP_AUDIO;
                 if ((err = snd_ac97_mixer(pbus, &ac97, &chip->ac97[i])) < 0) {
                         chip->ac97[i] = NULL; /* to be sure */
-                        snd_printdd("atiixp: codec %d not available for modem\n", i);
+                        snd_printdd("atiixp-modem: codec %d not available for modem\n", i);
                         continue;
                 }
                 codec_count++;
         }
 
         if (! codec_count) {
-                snd_printk(KERN_ERR "atiixp: no codec available\n");
+                snd_printk(KERN_ERR "atiixp-modem: no codec available\n");
                 return -ENODEV;
         }
 
@@ -1159,7 +1159,7 @@ static void __devinit snd_atiixp_proc_init(atiixp_t *chip)
 {
         snd_info_entry_t *entry;
 
-        if (! snd_card_proc_new(chip->card, "atiixp", &entry))
+        if (! snd_card_proc_new(chip->card, "atiixp-modem", &entry))
                 snd_info_set_text_ops(entry, chip, 1024, snd_atiixp_proc_read);
 }