338 files changed, 5706 insertions, 3344 deletions

diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt
index de4804e8b396..c360d4e91b48 100644
--- a/Documentation/debugging-via-ohci1394.txt
+++ b/Documentation/debugging-via-ohci1394.txt
@@ -36,14 +36,15 @@ available (notebooks) or too slow for extensive debug information (like ACPI).
 Drivers
 -------
 
-The OHCI-1394 drivers in drivers/firewire and drivers/ieee1394 initialize
-the OHCI-1394 controllers to a working state and can be used to enable
-physical DMA. By default you only have to load the driver, and physical
-DMA access will be granted to all remote nodes, but it can be turned off
-when using the ohci1394 driver.
-
-Because these drivers depend on the PCI enumeration to be completed, an
-initialization routine which can runs pretty early (long before console_init(),
+The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
+to a working state and enables physical DMA by default for all remote nodes.
+This can be turned off by ohci1394's module parameter phys_dma=0.
+
+The alternative firewire-ohci driver in drivers/firewire uses filtered physical
+DMA, hence is not yet suitable for remote debugging.
+
+Because ohci1394 depends on the PCI enumeration to be completed, an
+initialization routine which runs pretty early (long before console_init()
 which makes the printk buffer appear on the console can be called) was written.
 
 To activate it, enable CONFIG_PROVIDE_OHCI1394_DMA_INIT (Kernel hacking menu:
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 4d3aa519eadf..c1d1fd0c299b 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -172,6 +172,16 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
+What:   ide-tape driver
+When:   July 2008
+Files:  drivers/ide/ide-tape.c
+Why:    This driver might not have any users anymore and maintaining it for no
+        reason is an effort no one wants to make.
+Who:    Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
+        <petkovbb@googlemail.com>
+
+---------------------------
+
 What: libata spindown skipping and warning
 When: Dec 2008
 Why:  Some halt(8) implementations synchronize caches for and spin
@@ -306,3 +316,15 @@ Why:	Largely unmaintained and almost entirely unused.  File system
         is largely pointless as without a lot of work only the most
         trivial of Solaris binaries can work with the emulation code.
 Who:    David S. Miller <davem@davemloft.net>
+
+---------------------------
+
+What:   init_mm export
+When:   2.6.26
+Why:    Not used in-tree. The current out-of-tree users used it to
+        work around problems in the CPA code which should be resolved
+        by now. One usecase was described to provide verification code
+        of the CPA operation. That's a good idea in general, but such
+        code / infrastructure should be in the kernel and not in some
+        out-of-tree driver.
+Who:    Thomas Gleixner <tglx@linutronix.de>
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 3bd958360159..c31e0291e167 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -12,8 +12,9 @@ Supported adapters:
   * Intel 82801G (ICH7)
   * Intel 631xESB/632xESB (ESB2)
   * Intel 82801H (ICH8)
-  * Intel ICH9
+  * Intel 82801I (ICH9)
   * Intel Tolapai
+  * Intel ICH10
    Datasheets: Publicly available at the Intel website
 
 Authors: 
diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 94e2e3b9e77f..bcd7cd1278ef 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -258,8 +258,6 @@ Summary of ide driver parameters for kernel command line
                           As for VLB, it is safest to not specify it.
                           Bigger values are safer than smaller ones.
 
- "idex=noprobe"         : do not attempt to access/use this interface
- 
  "idex=base"            : probe for an interface at the addr specified,
                           where "base" is usually 0x1f0 or 0x170
                           and "ctl" is assumed to be "base"+0x206
@@ -309,53 +307,6 @@ are detected automatically).
 
 ================================================================================
 
-IDE ATAPI streaming tape driver
--------------------------------
-
-This driver is a part of the Linux ide driver and works in co-operation
-with linux/drivers/block/ide.c.
-
-The driver, in co-operation with ide.c, basically traverses the
-request-list for the block device interface. The character device
-interface, on the other hand, creates new requests, adds them
-to the request-list of the block device, and waits for their completion.
-
-Pipelined operation mode is now supported on both reads and writes.
-
-The block device major and minor numbers are determined from the
-tape's relative position in the ide interfaces, as explained in ide.c.
-
-The character device interface consists of the following devices:
-
- ht0            major 37, minor 0       first  IDE tape, rewind on close.
- ht1            major 37, minor 1       second IDE tape, rewind on close.
- ...
- nht0           major 37, minor 128     first  IDE tape, no rewind on close.
- nht1           major 37, minor 129     second IDE tape, no rewind on close.
- ...
-
-Run /dev/MAKEDEV to create the above entries.
-
-The general magnetic tape commands compatible interface, as defined by
-include/linux/mtio.h, is accessible through the character device.
-
-General ide driver configuration options, such as the interrupt-unmask
-flag, can be configured by issuing an ioctl to the block device interface,
-as any other ide device.
-
-Our own ide-tape ioctl's can be issued to either the block device or
-the character device interface.
-
-Maximal throughput with minimal bus load will usually be achieved in the
-following scenario:
-
-        1.      ide-tape is operating in the pipelined operation mode.
-        2.      No buffering is performed by the user backup program.
-
-
-
-================================================================================
-
 Some Terminology
 ----------------
 IDE = Integrated Drive Electronics, meaning that each drive has a built-in
diff --git a/MAINTAINERS b/MAINTAINERS
index 36c7bc641dba..fed09b547336 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -767,14 +767,14 @@ S:	Maintained
 
 BLACKFIN ARCHITECTURE
 P:      Bryan Wu
-M:      bryan.wu@analog.com
+M:      cooloney@kernel.org
 L:      uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:      http://blackfin.uclinux.org
 S:      Supported
 
 BLACKFIN EMAC DRIVER
 P:      Bryan Wu
-M:      bryan.wu@analog.com
+M:      cooloney@kernel.org
 L:      uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:      http://blackfin.uclinux.org
 S:      Supported
@@ -982,6 +982,12 @@ M:	mchan@broadcom.com
 L:      netdev@vger.kernel.org
 S:      Supported
 
+BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
+P:      Eliezer Tamir
+M:      eliezert@broadcom.com
+L:      netdev@vger.kernel.org
+S:      Supported
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 P:      Michael Chan
 M:      mchan@broadcom.com
@@ -2744,6 +2750,8 @@ S:	Maintained
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 P:      Faisal Latif
 M:      flatif@neteffect.com
+P:      Nishi Gupta
+M:      ngupta@neteffect.com
 P:      Glenn Streiff
 M:      gstreiff@neteffect.com
 L:      general@lists.openfabrics.org
@@ -3884,10 +3892,13 @@ M:	trivial@kernel.org
 L:      linux-kernel@vger.kernel.org
 S:      Maintained
 
-TULIP NETWORK DRIVER
-L:      tulip-users@lists.sourceforge.net
-W:      http://sourceforge.net/projects/tulip/
-S:      Orphan
+TULIP NETWORK DRIVERS
+P:      Grant Grundler
+M:      grundler@parisc-linux.org
+P:      Kyle McMartin
+M:      kyle@parisc-linux.org
+L:      netdev@vger.kernel.org
+S:      Maintained
 
 TUN/TAP driver
 P:      Maxim Krasnyansky
diff --git a/Makefile b/Makefile
index 99300dc680e9..a22978413b65 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 25
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Funky Weasel is Jiggy wit it
 
 # *DOCUMENTATION*
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 1c7f09aedf07..e473fa6d4a5f 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -61,6 +61,7 @@ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
         data[0] = regoffset;    /* register num */
         data[1] = value;                /* register data */
         err = i2c_transfer(adap, msg, 1);
+        i2c_put_adapter(adap);
         if (err >= 0)
                 return 0;
         return err;
@@ -91,6 +92,7 @@ int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
         msg->buf = data;
         err = i2c_transfer(adap, msg, 1);
         *value = data[0];
+        i2c_put_adapter(adap);
 
         if (err >= 0)
                 return 0;
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 5a77030e07a0..e765a8652b3e 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -129,7 +129,7 @@ static int __init atstk1004_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
         at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
         at32_add_device_mci(0);
 #endif
         at32_add_device_lcdc(0, &atstk1000_lcdc_data,
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index eaaa69bbdc38..7f4af0b1e111 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -11,6 +11,7 @@
 #include <linux/fs.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
+#include <linux/tick.h>
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
@@ -30,8 +31,10 @@ void cpu_idle(void)
 {
         /* endless idle loop with no priority at all */
         while (1) {
+                tick_nohz_stop_sched_tick();
                 while (!need_resched())
                         cpu_idle_sleep();
+                tick_nohz_restart_sched_tick();
                 preempt_enable_no_resched();
                 schedule();
                 preempt_disable();
@@ -345,6 +348,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
         p->thread.cpu_context.ksp = (unsigned long)childregs;
         p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
 
+        clear_tsk_thread_flag(p, TIF_DEBUG);
         if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
                 ocd_enable(p);
 
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index 6560cb18b4e3..ce4e4296b954 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -189,6 +189,8 @@ no_context:
 
         page = sysreg_read(PTBR);
         printk(KERN_ALERT "ptbr = %08lx", page);
+        if (address >= TASK_SIZE)
+                page = (unsigned long)swapper_pg_dir;
         if (page) {
                 page = ((unsigned long *)page)[address >> 22];
                 printk(" pgd = %08lx", page);
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index fe254f886a6e..75eba2ca7881 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -98,8 +98,11 @@ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 #       them changed.  We use .mach to indicate when they were updated
 #       last, otherwise make uses the target directory mtime.
 
+       show_mach_symlink = :
+ quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+silent_show_mach_symlink = :
 include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-        @echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+        @$($(quiet)show_mach_symlink)
 ifneq ($(KBUILD_SRC),)
         $(Q)mkdir -p include/asm-$(ARCH)
         $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index d59ee1530bd4..ae320dcfedef 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.14
-# Thu Nov 29 17:32:47 2007
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -116,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 CONFIG_BF527=y
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -306,6 +308,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -354,6 +357,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking
@@ -496,7 +500,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -506,9 +509,6 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -684,7 +684,6 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
 # CONFIG_TWI_KEYPAD is not set
 
 #
@@ -702,12 +701,12 @@ CONFIG_INPUT_MISC=y
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -772,7 +771,6 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 811711f59a25..9621caa60b5f 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -322,10 +322,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -697,7 +696,6 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 198f4123af4b..b51e76ce7f4f 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -323,10 +323,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -714,7 +713,6 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index b37ccc681e7a..d45fa535dad7 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -330,10 +330,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x8
 
 #
 # CPU Frequency scaling
@@ -1013,6 +1012,7 @@ CONFIG_SND_BFIN_AD73311_SE=4
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=m
 CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index fd702161ef59..c9707f7665ad 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -396,6 +396,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -1075,6 +1076,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=y
 CONFIG_SND_BF5XX_SOC=y
+CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 8546994939fb..4d8a63331309 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -367,6 +367,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 5453bc3664fc..8fd5d22cec34 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -105,13 +105,14 @@ int request_dma(unsigned int channel, char *device_id)
         mutex_unlock(&(dma_ch[channel].dmalock));
 
 #ifdef CONFIG_BF54x
-        if (channel >= CH_UART2_RX && channel <= CH_UART3_TX &&
-                strncmp(device_id, "BFIN_UART", 9) == 0)
-                dma_ch[channel].regs->peripheral_map |=
-                        (channel - CH_UART2_RX + 0xC);
-        else
-                dma_ch[channel].regs->peripheral_map |=
-                        (channel - CH_UART2_RX + 0x6);
+        if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
+                if (strncmp(device_id, "BFIN_UART", 9) == 0)
+                        dma_ch[channel].regs->peripheral_map |=
+                                (channel - CH_UART2_RX + 0xC);
+                else
+                        dma_ch[channel].regs->peripheral_map |=
+                                (channel - CH_UART2_RX + 0x6);
+        }
 #endif
 
         dma_ch[channel].device_id = device_id;
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index 5cf4bdb1df3b..1904d8b53328 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -1,9 +1,9 @@
 /*
- * bfin_gptimers.c - derived from bf53x_timers.c
- *  Driver for General Purpose Timer functions on the Blackfin processor
+ * gptimers.c - Blackfin General Purpose Timer core API
  *
- *  Copyright (C) 2005 John DeHority
- *  Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ * Copyright (C) 2005 John DeHority
+ * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
  *
  * Licensed under the GPLv2.
  */
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8229b1090eb9..2255c289a714 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -32,6 +32,7 @@
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 u16 _bfin_swrst;
+EXPORT_SYMBOL(_bfin_swrst);
 
 unsigned long memory_start, memory_end, physical_mem_end;
 unsigned long reserved_mem_dcache_on;
@@ -514,6 +515,7 @@ static __init void  memory_setup(void)
         printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
         printk(KERN_INFO "Memory map:\n"
+                KERN_INFO "  fixedcode = 0x%p-0x%p\n"
                 KERN_INFO "  text      = 0x%p-0x%p\n"
                 KERN_INFO "  rodata    = 0x%p-0x%p\n"
                 KERN_INFO "  bss       = 0x%p-0x%p\n"
@@ -527,7 +529,8 @@ static __init void  memory_setup(void)
 #if DMA_UNCACHED_REGION > 0
                 KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
 #endif
-                , _stext, _etext,
+                , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
+                _stext, _etext,
                 __start_rodata, __end_rodata,
                 __bss_start, __bss_stop,
                 _sdata, _edata,
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index aed832540b3b..cb01a9de2680 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -147,44 +147,64 @@ SECTIONS
 
         __l1_lma_start = .;
 
+#if L1_CODE_LENGTH
+# define LDS_L1_CODE *(.l1.text)
+#else
+# define LDS_L1_CODE
+#endif
         .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
         {
                 . = ALIGN(4);
                 __stext_l1 = .;
-                *(.l1.text)
-
+                LDS_L1_CODE
                 . = ALIGN(4);
                 __etext_l1 = .;
         }
 
+#if L1_DATA_A_LENGTH
+# define LDS_L1_A_DATA  *(.l1.data)
+# define LDS_L1_A_BSS   *(.l1.bss)
+# define LDS_L1_A_CACHE *(.data_l1.cacheline_aligned)
+#else
+# define LDS_L1_A_DATA
+# define LDS_L1_A_BSS
+# define LDS_L1_A_CACHE
+#endif
         .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
         {
                 . = ALIGN(4);
                 __sdata_l1 = .;
-                *(.l1.data)
+                LDS_L1_A_DATA
                 __edata_l1 = .;
 
                 . = ALIGN(4);
                 __sbss_l1 = .;
-                *(.l1.bss)
+                LDS_L1_A_BSS
 
                 . = ALIGN(32);
-                *(.data_l1.cacheline_aligned)
+                LDS_L1_A_CACHE
 
                 . = ALIGN(4);
                 __ebss_l1 = .;
         }
 
+#if L1_DATA_B_LENGTH
+# define LDS_L1_B_DATA  *(.l1.data.B)
+# define LDS_L1_B_BSS   *(.l1.bss.B)
+#else
+# define LDS_L1_B_DATA
+# define LDS_L1_B_BSS
+#endif
         .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
         {
                 . = ALIGN(4);
                 __sdata_b_l1 = .;
-                *(.l1.data.B)
+                LDS_L1_B_DATA
                 __edata_b_l1 = .;
 
                 . = ALIGN(4);
                 __sbss_b_l1 = .;
-                *(.l1.bss.B)
+                LDS_L1_B_BSS
 
                 . = ALIGN(4);
                 __ebss_b_l1 = .;
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 337515fba612..cf4bc0d83355 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -180,8 +180,8 @@ static struct mtd_partition partition_info[] = {
         },
         {
                 .name = "File System",
-                .offset = 4 * SIZE_1M,
-                .size = (256 - 4) * SIZE_1M,
+                .offset = MTDPART_OFS_APPEND,
+                .size = MTDPART_SIZ_FULL,
         },
 };
 
@@ -422,11 +422,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
         }, {
                 .name = "kernel",
                 .size = 0xe0000,
-                .offset = 0x20000
+                .offset = MTDPART_OFS_APPEND,
         }, {
                 .name = "file system",
-                .size = 0x700000,
-                .offset = 0x00100000,
+                .size = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
         }
 };
 
@@ -484,13 +484,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-        .enable_dma = 0,
-        .bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
         .enable_dma = 0,
@@ -611,17 +604,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .mode = SPI_MODE_3,
         },
 #endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-        {
-                .modalias = "ad5304_spi",
-                .max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 2,
-                .platform_data = NULL,
-                .controller_data = &ad5304_chip_info,
-                .mode = SPI_MODE_2,
-        },
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
         {
                 .modalias               = "ad7877",
@@ -818,6 +800,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
         &bf5xx_nand_device,
@@ -895,6 +890,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
+
+        &bfin_gpios_device,
 };
 
 static int __init stamp_init(void)
@@ -921,13 +918,18 @@ void native_machine_restart(char *cmd)
                 bfin_gpio_reset_spi0_ssel1();
 }
 
-/*
- * Currently the MAC address is saved in Flash by U-Boot
- */
-#define FLASH_MAC       0x203f0000
 void bfin_get_ether_addr(char *addr)
 {
-        *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
-        *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+        /* the MAC is stored in OTP memory page 0xDF */
+        u32 ret;
+        u64 otp_mac;
+        u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+        ret = otp_read(0xDF, 0x00, &otp_mac);
+        if (!(ret & 0x1)) {
+                char *otp_mac_p = (char *)&otp_mac;
+                for (ret = 0; ret < 6; ++ret)
+                        addr[ret] = otp_mac_p[5 - ret];
+        }
 }
 EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 2b09aa39f565..241b5a20a36a 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -99,11 +99,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
         }, {
                 .name = "kernel",
                 .size = 0xe0000,
-                .offset = 0x20000
+                .offset = MTDPART_OFS_APPEND,
         }, {
                 .name = "file system",
-                .size = 0x700000,
-                .offset = 0x00100000,
+                .size = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
         }
 };
 
@@ -298,6 +298,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -350,6 +363,8 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
         &i2c_gpio_device,
 #endif
+
+        &bfin_gpios_device,
 };
 
 static int __init ezkit_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a645f6fd091b..b2ac4816ae62 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -112,7 +112,7 @@ static struct platform_device net2272_bfin_device = {
 static struct mtd_partition stamp_partitions[] = {
         {
                 .name   = "Bootloader",
-                .size   = 0x20000,
+                .size   = 0x40000,
                 .offset = 0,
         }, {
                 .name   = "Kernel",
@@ -160,17 +160,17 @@ static struct platform_device stamp_flash_device = {
 static struct mtd_partition bfin_spi_flash_partitions[] = {
         {
                 .name = "bootloader",
-                .size = 0x00020000,
+                .size = 0x00040000,
                 .offset = 0,
                 .mask_flags = MTD_CAP_ROM
         }, {
                 .name = "kernel",
                 .size = 0xe0000,
-                .offset = 0x20000
+                .offset = MTDPART_OFS_APPEND,
         }, {
                 .name = "file system",
-                .size = 0x700000,
-                .offset = 0x00100000,
+                .size = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
         }
 };
 
@@ -212,13 +212,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-        .enable_dma = 0,
-        .bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
         .enable_dma = 1,
@@ -308,17 +301,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-        {
-                .modalias = "ad5304_spi",
-                .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 2,
-                .platform_data = NULL,
-                .controller_data = &ad5304_chip_info,
-                .mode = SPI_MODE_2,
-        },
-#endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
         {
                 .modalias = "spidev",
@@ -457,6 +439,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -518,6 +513,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
         &i2c_gpio_device,
 #endif
+
+        &bfin_gpios_device,
         &stamp_flash_device,
 };
 
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 8a3397db1d21..c95395ba7bfa 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -371,13 +371,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-        .enable_dma = 0,
-        .bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
         .enable_dma = 0,
@@ -483,17 +476,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .mode = SPI_MODE_3,
         },
 #endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-        {
-                .modalias = "ad5304_spi",
-                .max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 2,
-                .platform_data = NULL,
-                .controller_data = &ad5304_chip_info,
-                .mode = SPI_MODE_2,
-        },
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
         {
                 .modalias               = "ad7877",
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9e2277e0d25c..ea83148993da 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -128,6 +128,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
         {
@@ -343,7 +356,7 @@ static struct platform_device net2272_bfin_device = {
 static struct mtd_partition stamp_partitions[] = {
         {
                 .name       = "Bootloader",
-                .size       = 0x20000,
+                .size       = 0x40000,
                 .offset     = 0,
         }, {
                 .name       = "Kernel",
@@ -351,7 +364,7 @@ static struct mtd_partition stamp_partitions[] = {
                 .offset     = MTDPART_OFS_APPEND,
         }, {
                 .name       = "RootFS",
-                .size       = 0x400000 - 0x20000 - 0xE0000 - 0x10000,
+                .size       = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
                 .offset     = MTDPART_OFS_APPEND,
         }, {
                 .name       = "MAC Address",
@@ -391,17 +404,17 @@ static struct platform_device stamp_flash_device = {
 static struct mtd_partition bfin_spi_flash_partitions[] = {
         {
                 .name = "bootloader",
-                .size = 0x00020000,
+                .size = 0x00040000,
                 .offset = 0,
                 .mask_flags = MTD_CAP_ROM
         }, {
                 .name = "kernel",
                 .size = 0xe0000,
-                .offset = 0x20000
+                .offset = MTDPART_OFS_APPEND,
         }, {
                 .name = "file system",
-                .size = 0x700000,
-                .offset = 0x00100000,
+                .size = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
         }
 };
 
@@ -459,13 +472,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-        .enable_dma = 0,
-        .bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
         .enable_dma = 0,
@@ -578,17 +584,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 .mode = SPI_MODE_3,
         },
 #endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-        {
-                .modalias = "ad5304_spi",
-                .max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 2,
-                .platform_data = NULL,
-                .controller_data = &ad5304_chip_info,
-                .mode = SPI_MODE_2,
-        },
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
         {
                 .modalias               = "ad7877",
@@ -821,6 +816,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
+
+        &bfin_gpios_device,
         &stamp_flash_device,
 };
 
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 916e963e83ba..a0950c1fd800 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -285,8 +285,8 @@ static struct mtd_partition partition_info[] = {
         },
         {
                 .name = "File System",
-                .offset = 4 * SIZE_1M,
-                .size = (256 - 4) * SIZE_1M,
+                .offset = MTDPART_OFS_APPEND,
+                .size = MTDPART_SIZ_FULL,
         },
 };
 
@@ -333,7 +333,7 @@ static struct platform_device bf54x_sdh_device = {
 static struct mtd_partition ezkit_partitions[] = {
         {
                 .name       = "Bootloader",
-                .size       = 0x20000,
+                .size       = 0x40000,
                 .offset     = 0,
         }, {
                 .name       = "Kernel",
@@ -381,8 +381,8 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
                 .mask_flags = MTD_CAP_ROM
         }, {
                 .name = "linux kernel",
-                .size = 0x1c0000,
-                .offset = 0x40000
+                .size = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
         }
 };
 
@@ -594,6 +594,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
 static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
         &rtc_device,
@@ -646,6 +659,8 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
+
+        &bfin_gpios_device,
         &ezkit_flash_device,
 };
 
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index 374803a8d2e8..f5479298bb79 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -27,6 +27,8 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/module.h>
+
 #include <asm/blackfin.h>
 #include <asm/dma.h>
 
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 74fe258421a5..46222a75321a 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -28,6 +28,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
@@ -44,10 +45,9 @@
 
 #define INITIAL_STACK   0xFFB01000
 
-.text
+__INIT
 
 ENTRY(__start)
-ENTRY(__stext)
         /* R0: argument of command line string, passed from uboot, save it */
         R7 = R0;
         /* Enable Cycle Counter and Nesting Of Interrupts */
@@ -213,6 +213,7 @@ ENTRY(__stext)
 
 .LWAIT_HERE:
         jump .LWAIT_HERE;
+ENDPROC(__start)
 
 ENTRY(_real_start)
         [ -- sp ] = reti;
@@ -285,6 +286,9 @@ ENTRY(_real_start)
         call _start_kernel;
 .L_exit:
         jump.s  .L_exit;
+ENDPROC(_real_start)
+
+__FINIT
 
 .section .l1.text
 #if CONFIG_BFIN_KERNEL_CLOCK
@@ -450,6 +454,7 @@ ENTRY(_start_dma_code)
         SSYNC;
 
         RTS;
+ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
 
 .data
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 43c1b0982819..d357f648d963 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -223,7 +223,7 @@ static struct platform_device bfin_uart_device = {
 static struct mtd_partition ezkit_partitions[] = {
         {
                 .name       = "Bootloader",
-                .size       = 0x20000,
+                .size       = 0x40000,
                 .offset     = 0,
         }, {
                 .name       = "Kernel",
@@ -389,6 +389,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -446,6 +459,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &isp1362_hcd_device,
 #endif
 
+        &bfin_gpios_device,
         &ezkit_flash_device,
 };
 
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index b80ddd8b232d..9d45aa3265b1 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -31,140 +31,6 @@
 #include <asm/blackfin.h>
 #include <asm/mach/irq.h>
 
-.text
-
-ENTRY(_unmask_wdog_wakeup_evt)
-        [--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
-        P0.H = hi(SICA_IWR1);
-        P0.L = lo(SICA_IWR1);
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
-        P0.h = HI(SIC_IWR0);
-        P0.l = LO(SIC_IWR0);
-#else
-        P0.h = HI(SIC_IWR);
-        P0.l = LO(SIC_IWR);
-#endif
-        R7 = [P0];
-#if defined(CONFIG_BF561)
-        BITSET(R7, 27);
-#else
-        BITSET(R7,(IRQ_WATCH - IVG7));
-#endif
-        [P0] = R7;
-        SSYNC;
-
-        ( R7:0, P5:0 ) = [SP++];
-        RTS;
-
-.LWRITE_TO_STAT:
-        /* When watch dog timer is enabled, a write to STAT will load the
-         * contents of CNT to STAT
-         */
-        R7 = 0x0000(z);
-#if defined(CONFIG_BF561)
-        P0.h = HI(WDOGA_STAT);
-        P0.l = LO(WDOGA_STAT);
-#else
-        P0.h = HI(WDOG_STAT);
-        P0.l = LO(WDOG_STAT);
-#endif
-        [P0] = R7;
-        SSYNC;
-        JUMP .LSKIP_WRITE_TO_STAT;
-
-ENTRY(_program_wdog_timer)
-        [--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
-        P0.h = HI(WDOGA_CNT);
-        P0.l = LO(WDOGA_CNT);
-#else
-        P0.h = HI(WDOG_CNT);
-        P0.l = LO(WDOG_CNT);
-#endif
-        [P0] = R0;
-        SSYNC;
-
-#if defined(CONFIG_BF561)
-        P0.h = HI(WDOGA_CTL);
-        P0.l = LO(WDOGA_CTL);
-#else
-        P0.h = HI(WDOG_CTL);
-        P0.l = LO(WDOG_CTL);
-#endif
-        R7 = W[P0](Z);
-        CC = BITTST(R7,1);
-        if !CC JUMP .LWRITE_TO_STAT;
-        CC = BITTST(R7,2);
-        if !CC JUMP .LWRITE_TO_STAT;
-
-.LSKIP_WRITE_TO_STAT:
-#if defined(CONFIG_BF561)
-        P0.h = HI(WDOGA_CTL);
-        P0.l = LO(WDOGA_CTL);
-#else
-        P0.h = HI(WDOG_CTL);
-        P0.l = LO(WDOG_CTL);
-#endif
-        R7 = W[P0](Z);
-        BITCLR(R7,1);   /* Enable GP event */
-        BITSET(R7,2);
-        W[P0] = R7.L;
-        SSYNC;
-        NOP;
-
-        R7 = W[P0](Z);
-        BITCLR(R7,4);   /* Enable the wdog counter */
-        W[P0] = R7.L;
-        SSYNC;
-
-        ( R7:0, P5:0 ) = [SP++];
-        RTS;
-
-ENTRY(_clear_wdog_wakeup_evt)
-        [--SP] = ( R7:0, P5:0 );
-
-#if defined(CONFIG_BF561)
-        P0.h = HI(WDOGA_CTL);
-        P0.l = LO(WDOGA_CTL);
-#else
-        P0.h = HI(WDOG_CTL);
-        P0.l = LO(WDOG_CTL);
-#endif
-        R7 = 0x0AD6(Z);
-        W[P0] = R7.L;
-        SSYNC;
-
-        R7 = W[P0](Z);
-        BITSET(R7,15);
-        W[P0] = R7.L;
-        SSYNC;
-
-        R7 = W[P0](Z);
-        BITSET(R7,1);
-        BITSET(R7,2);
-        W[P0] = R7.L;
-        SSYNC;
-
-        ( R7:0, P5:0 ) = [SP++];
-        RTS;
-
-ENTRY(_disable_wdog_timer)
-        [--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
-        P0.h = HI(WDOGA_CTL);
-        P0.l = LO(WDOGA_CTL);
-#else
-        P0.h = HI(WDOG_CTL);
-        P0.l = LO(WDOG_CTL);
-#endif
-        R7 = 0xAD6(Z);
-        W[P0] = R7.L;
-        SSYNC;
-        ( R7:0, P5:0 ) = [SP++];
-        RTS;
-
-#if !defined(CONFIG_BF561)
 
 .section .l1.text
 
@@ -459,10 +325,12 @@ ENTRY(_set_sic_iwr)
         RTS;
 
 ENTRY(_set_rtc_istat)
+#ifndef CONFIG_BF561
         P0.H = hi(RTC_ISTAT);
         P0.L = lo(RTC_ISTAT);
         w[P0] = R0.L;
         SSYNC;
+#endif
         RTS;
 
 ENTRY(_test_pll_locked)
@@ -473,4 +341,3 @@ ENTRY(_test_pll_locked)
         CC = BITTST(R0,5);
         IF !CC JUMP 1b;
         RTS;
-#endif
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 880595afe98d..225ef14af75e 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -74,7 +74,7 @@ unsigned long bfin_sic_iwr[3];	/* Up to 3 SIC_IWRx registers */
 #endif
 
 struct ivgx {
-        /* irq number for request_irq, available in mach-bf533/irq.h */
+        /* irq number for request_irq, available in mach-bf5xx/irq.h */
         unsigned int irqno;
         /* corresponding bit in the SIC_ISR register */
         unsigned int isrflag;
@@ -86,7 +86,6 @@ struct ivg_slice {
         struct ivgx *istop;
 } ivg7_13[IVG13 - IVG7 + 1];
 
-static void search_IAR(void);
 
 /*
  * Search SIC_IAR and fill tables with the irqvalues
@@ -120,10 +119,10 @@ static void __init search_IAR(void)
 }
 
 /*
- * This is for BF533 internal IRQs
+ * This is for core internal IRQs
  */
 
-static void ack_noop(unsigned int irq)
+static void bfin_ack_noop(unsigned int irq)
 {
         /* Dummy function.  */
 }
@@ -156,11 +155,11 @@ static void bfin_internal_mask_irq(unsigned int irq)
 {
 #ifdef CONFIG_BF53x
         bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
-                             ~(1 << (irq - (IRQ_CORETMR + 1))));
+                             ~(1 << SIC_SYSIRQ(irq)));
 #else
         unsigned mask_bank, mask_bit;
-        mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
-        mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+        mask_bank = SIC_SYSIRQ(irq) / 32;
+        mask_bit = SIC_SYSIRQ(irq) % 32;
         bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
                              ~(1 << mask_bit));
 #endif
@@ -171,11 +170,11 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 {
 #ifdef CONFIG_BF53x
         bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
-                             (1 << (irq - (IRQ_CORETMR + 1))));
+                             (1 << SIC_SYSIRQ(irq)));
 #else
         unsigned mask_bank, mask_bit;
-        mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
-        mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+        mask_bank = SIC_SYSIRQ(irq) / 32;
+        mask_bit = SIC_SYSIRQ(irq) % 32;
         bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
                              (1 << mask_bit));
 #endif
@@ -187,8 +186,8 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
         unsigned bank, bit;
         unsigned long flags;
-        bank = (irq - (IRQ_CORETMR + 1)) / 32;
-        bit = (irq - (IRQ_CORETMR + 1)) % 32;
+        bank = SIC_SYSIRQ(irq) / 32;
+        bit = SIC_SYSIRQ(irq) % 32;
 
         local_irq_save(flags);
 
@@ -204,15 +203,18 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 #endif
 
 static struct irq_chip bfin_core_irqchip = {
-        .ack = ack_noop,
+        .ack = bfin_ack_noop,
         .mask = bfin_core_mask_irq,
         .unmask = bfin_core_unmask_irq,
 };
 
 static struct irq_chip bfin_internal_irqchip = {
-        .ack = ack_noop,
+        .ack = bfin_ack_noop,
         .mask = bfin_internal_mask_irq,
         .unmask = bfin_internal_unmask_irq,
+        .mask_ack = bfin_internal_mask_irq,
+        .disable = bfin_internal_mask_irq,
+        .enable = bfin_internal_unmask_irq,
 #ifdef CONFIG_PM
         .set_wake = bfin_internal_set_wake,
 #endif
@@ -221,38 +223,23 @@ static struct irq_chip bfin_internal_irqchip = {
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
 static int error_int_mask;
 
-static void bfin_generic_error_ack_irq(unsigned int irq)
-{
-
-}
-
 static void bfin_generic_error_mask_irq(unsigned int irq)
 {
         error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
 
-        if (!error_int_mask) {
-                local_irq_disable();
-                bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
-                                     ~(1 << (IRQ_GENERIC_ERROR -
-                                        (IRQ_CORETMR + 1))));
-                SSYNC();
-                local_irq_enable();
-        }
+        if (!error_int_mask)
+                bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
 }
 
 static void bfin_generic_error_unmask_irq(unsigned int irq)
 {
-        local_irq_disable();
-        bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
-                             (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
-        SSYNC();
-        local_irq_enable();
-
+        bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
         error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
 }
 
 static struct irq_chip bfin_generic_error_irqchip = {
-        .ack = bfin_generic_error_ack_irq,
+        .ack = bfin_ack_noop,
+        .mask_ack = bfin_generic_error_mask_irq,
         .mask = bfin_generic_error_mask_irq,
         .unmask = bfin_generic_error_unmask_irq,
 };
@@ -608,7 +595,7 @@ static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
         (struct pin_int_t *)PINT3_MASK_SET,
 };
 
-unsigned short get_irq_base(u8 bank, u8 bmap)
+inline unsigned short get_irq_base(u8 bank, u8 bmap)
 {
 
         u16 irq_base;
@@ -969,17 +956,12 @@ int __init init_arch_irq(void)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
         bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
         bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
-        bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-        bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
 # ifdef CONFIG_BF54x
         bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
-        bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
 # endif
 #else
         bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
-        bfin_write_SIC_IWR(IWR_ENABLE_ALL);
 #endif
-        SSYNC();
 
         local_irq_disable();
 
@@ -1001,90 +983,53 @@ int __init init_arch_irq(void)
                         set_irq_chip(irq, &bfin_core_irqchip);
                 else
                         set_irq_chip(irq, &bfin_internal_irqchip);
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
-                if (irq != IRQ_GENERIC_ERROR) {
-#endif
 
-                        switch (irq) {
+                switch (irq) {
 #if defined(CONFIG_BF53x)
-                        case IRQ_PROG_INTA:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
+                case IRQ_PROG_INTA:
 # if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
-                        case IRQ_MAC_RX:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
+                case IRQ_MAC_RX:
 # endif
 #elif defined(CONFIG_BF54x)
-                        case IRQ_PINT0:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
-                        case IRQ_PINT1:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
-                        case IRQ_PINT2:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
-                        case IRQ_PINT3:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
+                case IRQ_PINT0:
+                case IRQ_PINT1:
+                case IRQ_PINT2:
+                case IRQ_PINT3:
 #elif defined(CONFIG_BF52x)
-                        case IRQ_PORTF_INTA:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
-                        case IRQ_PORTG_INTA:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
-                        case IRQ_PORTH_INTA:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
+                case IRQ_PORTF_INTA:
+                case IRQ_PORTG_INTA:
+                case IRQ_PORTH_INTA:
 #elif defined(CONFIG_BF561)
-                        case IRQ_PROG0_INTA:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
-                        case IRQ_PROG1_INTA:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
-                        case IRQ_PROG2_INTA:
-                                set_irq_chained_handler(irq,
-                                                        bfin_demux_gpio_irq);
-                                break;
+                case IRQ_PROG0_INTA:
+                case IRQ_PROG1_INTA:
+                case IRQ_PROG2_INTA:
 #endif
-                        default:
-                                set_irq_handler(irq, handle_simple_irq);
-                                break;
-                        }
-
+                        set_irq_chained_handler(irq,
+                                                bfin_demux_gpio_irq);
+                        break;
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
-                } else {
+                case IRQ_GENERIC_ERROR:
                         set_irq_handler(irq, bfin_demux_error_irq);
-                }
+
+                        break;
 #endif
+                default:
+                        set_irq_handler(irq, handle_simple_irq);
+                        break;
+                }
         }
+
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
-        for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
-                set_irq_chip(irq, &bfin_generic_error_irqchip);
-                set_irq_handler(irq, handle_level_irq);
-        }
+        for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
+                set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip,
+                                         handle_level_irq);
 #endif
 
-        for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) {
+        /* if configured as edge, then will be changed to do_edge_IRQ */
+        for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++)
+                set_irq_chip_and_handler(irq, &bfin_gpio_irqchip,
+                                         handle_level_irq);
 
-                set_irq_chip(irq, &bfin_gpio_irqchip);
-                /* if configured as edge, then will be changed to do_edge_IRQ */
-                set_irq_handler(irq, handle_level_irq);
-        }
 
         bfin_write_IMASK(0);
         CSYNC();
@@ -1106,6 +1051,16 @@ int __init init_arch_irq(void)
             IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
             IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
+        bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
+        bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+# ifdef CONFIG_BF54x
+        bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+# endif
+#else
+        bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+
         return 0;
 }
 
@@ -1122,7 +1077,6 @@ void do_irq(int vec, struct pt_regs *fp)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
                 unsigned long sic_status[3];
 
-                SSYNC();
                 sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
                 sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
 #ifdef CONFIG_BF54x
@@ -1138,7 +1092,7 @@ void do_irq(int vec, struct pt_regs *fp)
                 }
 #else
                 unsigned long sic_status;
-                SSYNC();
+
                 sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
 
                 for (;; ivg++) {
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 1f516c55bde6..ec3141fefd20 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -181,7 +181,7 @@ void __init mem_init(void)
         }
 }
 
-static __init void free_init_pages(const char *what, unsigned long begin, unsigned long end)
+static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
         unsigned long addr;
         /* next to check that the page we free is not a partial page */
@@ -203,7 +203,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void __init free_initmem(void)
+void __init_refok free_initmem(void)
 {
 #if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU
         free_init_pages("unused kernel memory",
diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c
index 900c7ff2b7e9..b5c30f766c40 100644
--- a/arch/powerpc/boot/cuboot-bamboo.c
+++ b/arch/powerpc/boot/cuboot-bamboo.c
@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c
index c5f37ce172ea..56564ba37f62 100644
--- a/arch/powerpc/boot/cuboot-ebony.c
+++ b/arch/powerpc/boot/cuboot-ebony.c
@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c
index c021167f9381..5434d70b5660 100644
--- a/arch/powerpc/boot/cuboot-katmai.c
+++ b/arch/powerpc/boot/cuboot-katmai.c
@@ -22,6 +22,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c
index f66455a45ab1..b55b80467eed 100644
--- a/arch/powerpc/boot/cuboot-taishan.c
+++ b/arch/powerpc/boot/cuboot-taishan.c
@@ -21,7 +21,9 @@
 #include "dcr.h"
 #include "4xx.h"
 
+#define TARGET_4xx
 #define TARGET_44x
+#define TARGET_440GX
 #include "ppcboot.h"
 
 static bd_t bd;
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index bdedebe1bc14..3db93e85e9ea 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -11,6 +11,7 @@
 #include "4xx.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index 5dd3d15f0feb..ae68fefc01b6 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -235,7 +235,7 @@
                         #interrupt-cells = <1>;
                         #size-cells = <2>;
                         #address-cells = <3>;
-                        compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex";
+                        compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
                         primary;
                         port = <0>; /* port number */
                         reg = <a0000000 20000000        /* Config space access */
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index bc32ac7250ec..fc86e5a3afc4 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -38,8 +38,8 @@
                         timebase-frequency = <0>; /* Filled in by zImage */
                         i-cache-line-size = <20>;
                         d-cache-line-size = <20>;
-                        i-cache-size = <20000>;
-                        d-cache-size = <20000>;
+                        i-cache-size = <8000>;
+                        d-cache-size = <8000>;
                         dcr-controller;
                         dcr-access-method = "native";
                 };
@@ -136,11 +136,11 @@
                 };
 
                 POB0: opb {
-                        compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+                        compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
                         #address-cells = <1>;
                         #size-cells = <1>;
-                        ranges = <00000000 4 e0000000 20000000>;
-                        clock-frequency = <0>; /* Filled in by zImage */
+                        ranges = <00000000 4 e0000000 20000000>;
+                        clock-frequency = <0>; /* Filled in by zImage */
 
                         EBC0: ebc {
                                 compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
@@ -153,38 +153,38 @@
                         };
 
                         UART0: serial@10000200 {
-                                device_type = "serial";
-                                compatible = "ns16550";
-                                reg = <10000200 8>;
+                                device_type = "serial";
+                                compatible = "ns16550";
+                                reg = <10000200 8>;
                                 virtual-reg = <a0000200>;
-                                clock-frequency = <0>; /* Filled in by zImage */
-                                current-speed = <1c200>;
-                                interrupt-parent = <&UIC0>;
-                                interrupts = <0 4>;
-                        };
+                                clock-frequency = <0>; /* Filled in by zImage */
+                                current-speed = <1c200>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <0 4>;
+                        };
 
                         UART1: serial@10000300 {
-                                device_type = "serial";
-                                compatible = "ns16550";
-                                reg = <10000300 8>;
+                                device_type = "serial";
+                                compatible = "ns16550";
+                                reg = <10000300 8>;
                                 virtual-reg = <a0000300>;
-                                clock-frequency = <0>;
-                                current-speed = <0>;
-                                interrupt-parent = <&UIC0>;
-                                interrupts = <1 4>;
-                        };
+                                clock-frequency = <0>;
+                                current-speed = <0>;
+                                interrupt-parent = <&UIC0>;
+                                interrupts = <1 4>;
+                        };
 
 
                         UART2: serial@10000600 {
-                                device_type = "serial";
-                                compatible = "ns16550";
-                                reg = <10000600 8>;
+                                device_type = "serial";
+                                compatible = "ns16550";
+                                reg = <10000600 8>;
                                 virtual-reg = <a0000600>;
-                                clock-frequency = <0>;
-                                current-speed = <0>;
-                                interrupt-parent = <&UIC1>;
-                                interrupts = <5 4>;
-                        };
+                                clock-frequency = <0>;
+                                current-speed = <0>;
+                                interrupt-parent = <&UIC1>;
+                                interrupts = <5 4>;
+                        };
 
                         IIC0: i2c@10000400 {
                                 compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 13929771bee7..9eed1f68fcab 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1151,7 +1151,7 @@ static void cell_handle_interrupt(struct pt_regs *regs,
                 for (i = 0; i < num_counters; ++i) {
                         if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i))
                             && ctr[i].enabled) {
-                                oprofile_add_pc(pc, is_kernel, i);
+                                oprofile_add_ext_sample(pc, regs, i, is_kernel);
                                 cbe_write_ctr(cpu, i, reset_value[i]);
                         }
                 }
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 9aa4425d80b2..4d5fd1dbd400 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -199,6 +199,7 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
 
         return 0;
 }
+EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv);
 
 /**
  * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index edab631a8dcb..20ea0e118f24 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -113,7 +113,7 @@
 
 /* IOMMU sizing */
 #define IO_SEGMENT_SHIFT        28
-#define IO_PAGENO_BITS          (IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT)
+#define IO_PAGENO_BITS(shift)   (IO_SEGMENT_SHIFT - (shift))
 
 /* The high bit needs to be set on every DMA address */
 #define SPIDER_DMA_OFFSET       0x80000000ul
@@ -123,7 +123,6 @@ struct iommu_window {
         struct cbe_iommu *iommu;
         unsigned long offset;
         unsigned long size;
-        unsigned long pte_offset;
         unsigned int ioid;
         struct iommu_table table;
 };
@@ -200,7 +199,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
                 (window->ioid & IOPTE_IOID_Mask);
 #endif
 
-        io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+        io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
         for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE)
                 io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
@@ -232,7 +231,7 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
                 | (window->ioid & IOPTE_IOID_Mask);
 #endif
 
-        io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+        io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
         for (i = 0; i < npages; i++)
                 io_pte[i] = pte;
@@ -307,76 +306,84 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base)
         return -ENODEV;
 }
 
-static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu,
+static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
                                 unsigned long dbase, unsigned long dsize,
                                 unsigned long fbase, unsigned long fsize)
 {
         struct page *page;
-        int i;
-        unsigned long reg, segments, pages_per_segment, ptab_size, stab_size,
-                      n_pte_pages, base;
-
-        base = dbase;
-        if (fsize != 0)
-                base = min(fbase, dbase);
+        unsigned long segments, stab_size;
 
         segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
-        pages_per_segment = 1ull << IO_PAGENO_BITS;
 
-        pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n",
-                        __FUNCTION__, iommu->nid, segments, pages_per_segment);
+        pr_debug("%s: iommu[%d]: segments: %lu\n",
+                        __FUNCTION__, iommu->nid, segments);
 
         /* set up the segment table */
         stab_size = segments * sizeof(unsigned long);
         page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
         BUG_ON(!page);
         iommu->stab = page_address(page);
-        clear_page(iommu->stab);
+        memset(iommu->stab, 0, stab_size);
+}
+
+static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
+                unsigned long base, unsigned long size, unsigned long gap_base,
+                unsigned long gap_size, unsigned long page_shift)
+{
+        struct page *page;
+        int i;
+        unsigned long reg, segments, pages_per_segment, ptab_size,
+                      n_pte_pages, start_seg, *ptab;
+
+        start_seg = base >> IO_SEGMENT_SHIFT;
+        segments  = size >> IO_SEGMENT_SHIFT;
+        pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift);
+        /* PTEs for each segment must start on a 4K bounday */
+        pages_per_segment = max(pages_per_segment,
+                                (1 << 12) / sizeof(unsigned long));
 
-        /* ... and the page tables. Since these are contiguous, we can treat
-         * the page tables as one array of ptes, like pSeries does.
-         */
         ptab_size = segments * pages_per_segment * sizeof(unsigned long);
         pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
                         iommu->nid, ptab_size, get_order(ptab_size));
         page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
         BUG_ON(!page);
 
-        iommu->ptab = page_address(page);
-        memset(iommu->ptab, 0, ptab_size);
+        ptab = page_address(page);
+        memset(ptab, 0, ptab_size);
 
-        /* allocate a bogus page for the end of each mapping */
-        page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
-        BUG_ON(!page);
-        iommu->pad_page = page_address(page);
-        clear_page(iommu->pad_page);
-
-        /* number of pages needed for a page table */
-        n_pte_pages = (pages_per_segment *
-                       sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT;
+        /* number of 4K pages needed for a page table */
+        n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
 
         pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
-                        __FUNCTION__, iommu->nid, iommu->stab, iommu->ptab,
+                        __FUNCTION__, iommu->nid, iommu->stab, ptab,
                         n_pte_pages);
 
         /* initialise the STEs */
         reg = IOSTE_V | ((n_pte_pages - 1) << 5);
 
-        if (IOMMU_PAGE_SIZE == 0x1000)
-                reg |= IOSTE_PS_4K;
-        else if (IOMMU_PAGE_SIZE == 0x10000)
-                reg |= IOSTE_PS_64K;
-        else {
-                extern void __unknown_page_size_error(void);
-                __unknown_page_size_error();
+        switch (page_shift) {
+        case 12: reg |= IOSTE_PS_4K;  break;
+        case 16: reg |= IOSTE_PS_64K; break;
+        case 20: reg |= IOSTE_PS_1M;  break;
+        case 24: reg |= IOSTE_PS_16M; break;
+        default: BUG();
         }
 
+        gap_base = gap_base >> IO_SEGMENT_SHIFT;
+        gap_size = gap_size >> IO_SEGMENT_SHIFT;
+
         pr_debug("Setting up IOMMU stab:\n");
-        for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) {
-                iommu->stab[i] = reg |
-                        (__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i);
+        for (i = start_seg; i < (start_seg + segments); i++) {
+                if (i >= gap_base && i < (gap_base + gap_size)) {
+                        pr_debug("\toverlap at %d, skipping\n", i);
+                        continue;
+                }
+                iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) *
+                                        (i - start_seg));
                 pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]);
         }
+
+        return ptab;
 }
 
 static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
@@ -423,7 +430,9 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
 static void cell_iommu_setup_hardware(struct cbe_iommu *iommu,
         unsigned long base, unsigned long size)
 {
-        cell_iommu_setup_page_tables(iommu, base, size, 0, 0);
+        cell_iommu_setup_stab(iommu, base, size, 0, 0);
+        iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0,
+                                            IOMMU_PAGE_SHIFT);
         cell_iommu_enable_hardware(iommu);
 }
 
@@ -464,6 +473,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
                         unsigned long pte_offset)
 {
         struct iommu_window *window;
+        struct page *page;
         u32 ioid;
 
         ioid = cell_iommu_get_ioid(np);
@@ -475,13 +485,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
         window->size = size;
         window->ioid = ioid;
         window->iommu = iommu;
-        window->pte_offset = pte_offset;
 
         window->table.it_blocksize = 16;
         window->table.it_base = (unsigned long)iommu->ptab;
         window->table.it_index = iommu->nid;
-        window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) +
-                window->pte_offset;
+        window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset;
         window->table.it_size = size >> IOMMU_PAGE_SHIFT;
 
         iommu_init_table(&window->table, iommu->nid);
@@ -504,6 +512,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
          * This code also assumes that we have a window that starts at 0,
          * which is the case on all spider based blades.
          */
+        page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
+        BUG_ON(!page);
+        iommu->pad_page = page_address(page);
+        clear_page(iommu->pad_page);
+
         __set_bit(0, window->table.it_map);
         tce_build_cell(&window->table, window->table.it_offset, 1,
                        (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
@@ -549,7 +562,7 @@ static void cell_dma_dev_setup_iommu(struct device *dev)
         archdata->dma_data = &window->table;
 }
 
-static void cell_dma_dev_setup_static(struct device *dev);
+static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
 {
@@ -557,7 +570,7 @@ static void cell_dma_dev_setup(struct device *dev)
 
         /* Order is important here, these are not mutually exclusive */
         if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
-                cell_dma_dev_setup_static(dev);
+                cell_dma_dev_setup_fixed(dev);
         else if (get_pci_dma_ops() == &dma_iommu_ops)
                 cell_dma_dev_setup_iommu(dev);
         else if (get_pci_dma_ops() == &dma_direct_ops)
@@ -858,7 +871,7 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
         return 0;
 }
 
-static void cell_dma_dev_setup_static(struct device *dev)
+static void cell_dma_dev_setup_fixed(struct device *dev)
 {
         struct dev_archdata *archdata = &dev->archdata;
         u64 addr;
@@ -869,35 +882,45 @@ static void cell_dma_dev_setup_static(struct device *dev)
         dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
 }
 
+static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
+                           unsigned long base_pte)
+{
+        unsigned long segment, offset;
+
+        segment = addr >> IO_SEGMENT_SHIFT;
+        offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24));
+        ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long));
+
+        pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
+                  addr, ptab, segment, offset);
+
+        ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask);
+}
+
 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
         struct device_node *np, unsigned long dbase, unsigned long dsize,
         unsigned long fbase, unsigned long fsize)
 {
-        unsigned long base_pte, uaddr, *io_pte;
-        int i;
+        unsigned long base_pte, uaddr, ioaddr, *ptab;
 
-        dma_iommu_fixed_base = fbase;
+        ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24);
 
-        /* convert from bytes into page table indices */
-        dbase = dbase >> IOMMU_PAGE_SHIFT;
-        dsize = dsize >> IOMMU_PAGE_SHIFT;
-        fbase = fbase >> IOMMU_PAGE_SHIFT;
-        fsize = fsize >> IOMMU_PAGE_SHIFT;
+        dma_iommu_fixed_base = fbase;
 
         pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-        io_pte = iommu->ptab;
         base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
                     | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
-        uaddr = 0;
-        for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) {
+        for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
                 /* Don't touch the dynamic region */
-                if (i >= dbase && i < (dbase + dsize)) {
-                        pr_debug("iommu: static/dynamic overlap, skipping\n");
+                ioaddr = uaddr + fbase;
+                if (ioaddr >= dbase && ioaddr < (dbase + dsize)) {
+                        pr_debug("iommu: fixed/dynamic overlap, skipping\n");
                         continue;
                 }
-                io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
+
+                insert_16M_pte(uaddr, ptab, base_pte);
         }
 
         mb();
@@ -995,7 +1018,9 @@ static int __init cell_iommu_fixed_mapping_init(void)
                         "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase,
                          dbase + dsize, fbase, fbase + fsize);
 
-                cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize);
+                cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize);
+                iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0,
+                                                    IOMMU_PAGE_SHIFT);
                 cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize,
                                              fbase, fsize);
                 cell_iommu_enable_hardware(iommu);
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index a7f609b3b876..dda34650cb07 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -149,6 +149,11 @@ static void __init cell_init_irq(void)
         mpic_init_IRQ();
 }
 
+static void __init cell_set_dabrx(void)
+{
+        mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
+}
+
 static void __init cell_setup_arch(void)
 {
 #ifdef CONFIG_SPU_BASE
@@ -158,6 +163,8 @@ static void __init cell_setup_arch(void)
 
         cbe_regs_init();
 
+        cell_set_dabrx();
+
 #ifdef CONFIG_CBE_RAS
         cbe_ras_init();
 #endif
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 87eb07f94c5f..712001f6b7da 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -81,9 +81,12 @@ struct spu_slb {
 void spu_invalidate_slbs(struct spu *spu)
 {
         struct spu_priv2 __iomem *priv2 = spu->priv2;
+        unsigned long flags;
 
+        spin_lock_irqsave(&spu->register_lock, flags);
         if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK)
                 out_be64(&priv2->slb_invalidate_all_W, 0UL);
+        spin_unlock_irqrestore(&spu->register_lock, flags);
 }
 EXPORT_SYMBOL_GPL(spu_invalidate_slbs);
 
@@ -148,7 +151,11 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
                         __func__, slbe, slb->vsid, slb->esid);
 
         out_be64(&priv2->slb_index_W, slbe);
+        /* set invalid before writing vsid */
+        out_be64(&priv2->slb_esid_RW, 0);
+        /* now it's safe to write the vsid */
         out_be64(&priv2->slb_vsid_RW, slb->vsid);
+        /* setting the new esid makes the entry valid again */
         out_be64(&priv2->slb_esid_RW, slb->esid);
 }
 
@@ -290,9 +297,11 @@ void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
                 nr_slbs++;
         }
 
+        spin_lock_irq(&spu->register_lock);
         /* Add the set of SLBs */
         for (i = 0; i < nr_slbs; i++)
                 spu_load_slb(spu, i, &slbs[i]);
+        spin_unlock_irq(&spu->register_lock);
 }
 EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs);
 
@@ -337,13 +346,14 @@ spu_irq_class_1(int irq, void *data)
         if (stat & CLASS1_STORAGE_FAULT_INTR)
                 spu_mfc_dsisr_set(spu, 0ul);
         spu_int_stat_clear(spu, 1, stat);
-        spin_unlock(&spu->register_lock);
-        pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
-                        dar, dsisr);
 
         if (stat & CLASS1_SEGMENT_FAULT_INTR)
                 __spu_trap_data_seg(spu, dar);
 
+        spin_unlock(&spu->register_lock);
+        pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+                        dar, dsisr);
+
         if (stat & CLASS1_STORAGE_FAULT_INTR)
                 __spu_trap_data_map(spu, dar, dsisr);
 
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 133995ed5cc7..cf6c2c89211d 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -109,13 +109,12 @@ void spu_forget(struct spu_context *ctx)
 
         /*
          * This is basically an open-coded spu_acquire_saved, except that
-         * we don't acquire the state mutex interruptible.
+         * we don't acquire the state mutex interruptible, and we don't
+         * want this context to be rescheduled on release.
          */
         mutex_lock(&ctx->state_mutex);
-        if (ctx->state != SPU_STATE_SAVED) {
-                set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags);
+        if (ctx->state != SPU_STATE_SAVED)
                 spu_deactivate(ctx);
-        }
 
         mm = ctx->owner;
         ctx->owner = NULL;
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index c66c3756970d..f7a7e8635fb6 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -367,6 +367,13 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
                 return NOPFN_SIGBUS;
 
         /*
+         * Because we release the mmap_sem, the context may be destroyed while
+         * we're in spu_wait. Grab an extra reference so it isn't destroyed
+         * in the meantime.
+         */
+        get_spu_context(ctx);
+
+        /*
          * We have to wait for context to be loaded before we have
          * pages to hand out to the user, but we don't want to wait
          * with the mmap_sem held.
@@ -375,7 +382,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
          * hanged.
          */
         if (spu_acquire(ctx))
-                return NOPFN_REFAULT;
+                goto refault;
 
         if (ctx->state == SPU_STATE_SAVED) {
                 up_read(&current->mm->mmap_sem);
@@ -391,6 +398,9 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
         if (!ret)
                 spu_release(ctx);
+
+refault:
+        put_spu_context(ctx);
         return NOPFN_REFAULT;
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 3a5972117de7..5d5f680cd0b8 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -246,7 +246,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
         spu_switch_notify(spu, ctx);
         ctx->state = SPU_STATE_RUNNABLE;
 
-        spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
+        spuctx_switch_state(ctx, SPU_UTIL_USER);
 }
 
 /*
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 01974f7776e1..79aa773f3c99 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -58,12 +58,12 @@ static int sputrace_sprint(char *tbuf, int n)
                 ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start));
 
         return snprintf(tbuf, n,
-                "[%lu.%09lu] %d: %s (thread = %d, spu = %d)\n",
+                "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n",
                 (unsigned long) tv.tv_sec,
                 (unsigned long) tv.tv_nsec,
-                t->owner_tid,
-                t->name,
                 t->curr_tid,
+                t->name,
+                t->owner_tid,
                 t->number);
 }
 
@@ -188,6 +188,7 @@ struct spu_probe spu_probes[] = {
         { "spufs_ps_nopfn__insert", "%p %p", spu_context_event },
         { "spu_acquire_saved__enter", "%p", spu_context_nospu_event },
         { "destroy_spu_context__enter", "%p", spu_context_nospu_event },
+        { "spufs_stop_callback__enter", "%p %p", spu_context_event },
 };
 
 static int __init sputrace_init(void)
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 6f5886c7b1f9..e9dc7a55d1b9 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -34,6 +34,7 @@
 
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/hardirq.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -117,6 +118,8 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
          *     Write INT_MASK_class1 with value of 0.
          *     Save INT_Mask_class2 in CSA.
          *     Write INT_MASK_class2 with value of 0.
+         *     Synchronize all three interrupts to be sure
+         *     we no longer execute a handler on another CPU.
          */
         spin_lock_irq(&spu->register_lock);
         if (csa) {
@@ -129,6 +132,9 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
         spu_int_mask_set(spu, 2, 0ul);
         eieio();
         spin_unlock_irq(&spu->register_lock);
+        synchronize_irq(spu->irqs[0]);
+        synchronize_irq(spu->irqs[1]);
+        synchronize_irq(spu->irqs[2]);
 }
 
 static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)
diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h
index b2e292df13ca..ac82ac35b991 100644
--- a/arch/powerpc/platforms/celleb/beat.h
+++ b/arch/powerpc/platforms/celleb/beat.h
@@ -21,9 +21,6 @@
 #ifndef _CELLEB_BEAT_H
 #define _CELLEB_BEAT_H
 
-#define DABRX_KERNEL            (1UL<<1)
-#define DABRX_USER              (1UL<<0)
-
 int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*);
 int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t);
 int64_t beat_repository_encode(int, const char *, uint64_t[4]);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b3400b5ad5c6..783cfbbf87ca 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -330,6 +330,7 @@ config CPU_SUBTYPE_SH5_101
 
 config CPU_SUBTYPE_SH5_103
         bool "Support SH5-103 processor"
+        select CPU_SH5
 
 endchoice
 
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 5c3359756a92..71ff3d6f26e2 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -90,7 +90,7 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
 
 static int sh_dmac_request_dma(struct dma_channel *chan)
 {
-        if (unlikely(!chan->flags & DMA_TEI_CAPABLE))
+        if (unlikely(!(chan->flags & DMA_TEI_CAPABLE)))
                 return 0;
 
         return request_irq(get_dmte_irq(chan->chan), dma_tei,
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index b76a14f12ce2..ab77b0e0fa0e 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -93,7 +93,7 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
         }
 
         hd->base = ioremap_nocache(res->start, res->end - res->start + 1);
-        if (!unlikely(hd->base)) {
+        if (unlikely(!hd->base)) {
                 dev_err(&pdev->dev, "ioremap failed\n");
 
                 if (!pdev->dev.platform_data)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index 0dac87b19624..e1284fc69361 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -83,9 +83,9 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
                 return PCIBIOS_DEVICE_NOT_FOUND;
 
         switch (size) {
-                case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break;
-                case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break;
-                case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break;
+                case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
+                case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
+                case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
         }       
 
         return PCIBIOS_SUCCESSFUL;
@@ -97,9 +97,9 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
                 return PCIBIOS_DEVICE_NOT_FOUND;
 
         switch (size) {
-                case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
-                case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
-                case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+                case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+                case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+                case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
         }
 
         return PCIBIOS_SUCCESSFUL;
@@ -127,36 +127,36 @@ int __init gapspci_init(void)
          */
 
         for (i=0; i<16; i++)
-                idbuf[i] = ctrl_inb(GAPSPCI_REGS+i);
+                idbuf[i] = inb(GAPSPCI_REGS+i);
 
         if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
                 return -ENODEV;
 
-        ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18);
+        outl(0x5a14a501, GAPSPCI_REGS+0x18);
 
         for (i=0; i<1000000; i++)
                 ;
 
-        if (ctrl_inl(GAPSPCI_REGS+0x18) != 1)
+        if (inl(GAPSPCI_REGS+0x18) != 1)
                 return -EINVAL;
 
-        ctrl_outl(0x01000000, GAPSPCI_REGS+0x20);
-        ctrl_outl(0x01000000, GAPSPCI_REGS+0x24);
+        outl(0x01000000, GAPSPCI_REGS+0x20);
+        outl(0x01000000, GAPSPCI_REGS+0x24);
 
-        ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
-        ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+        outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+        outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
 
-        ctrl_outl(1, GAPSPCI_REGS+0x14);
-        ctrl_outl(1, GAPSPCI_REGS+0x34);
+        outl(1, GAPSPCI_REGS+0x14);
+        outl(1, GAPSPCI_REGS+0x34);
 
         /* Setting Broadband Adapter */
-        ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
-        ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
-        ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
-        ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
-        ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
-        ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
-        ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+        outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+        outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+        outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+        outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+        outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+        outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+        outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
 
         return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index b230eb278cef..cc530f4d84d6 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
         UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index 3feb95a4fcbc..fb781329848a 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -21,8 +21,8 @@
 #include <asm/freq.h>
 #include <asm/io.h>
 
-const static int pll1rate[]={8,12,16,0};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={8,12,16,0};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
 #if (CONFIG_SH_CLK_MD == 0)
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index db6ef5cecde1..e98dc4450352 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
         UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index a564425b905f..e6d4ec445dd8 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
         UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index fcc80bb7bee7..10f2a760c5ee 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -94,9 +94,9 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
                 boot_cpu_data.dcache.way_incr   = (1 << 13);
                 boot_cpu_data.dcache.entry_mask = 0x1ff0;
                 boot_cpu_data.dcache.sets       = 512;
-                ctrl_outl(CCR_CACHE_32KB, CCR3);
+                ctrl_outl(CCR_CACHE_32KB, CCR3_REG);
 #else
-                ctrl_outl(CCR_CACHE_16KB, CCR3);
+                ctrl_outl(CCR_CACHE_16KB, CCR3_REG);
 #endif
 #endif
         }
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index dd0a20a685f7..f581534cb732 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 #include <asm/rtc.h>
 
 enum {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index 969804bb523b..d3733b13ea52 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
         UNUSED = 0,
@@ -123,15 +123,15 @@ static struct resource rtc_resources[] = {
                 .flags  = IORESOURCE_IO,
         },
         [1] =   {
-                .start  = 20,
+                .start  = 21,
                 .flags  = IORESOURCE_IRQ,
         },
         [2] =   {
-                .start  = 21,
+                .start  = 22,
                 .flags  = IORESOURCE_IRQ,
         },
         [3] =   {
-                .start  = 22,
+                .start  = 20,
                 .flags  = IORESOURCE_IRQ,
         },
 };
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 0cc0e2bf135d..7406c9ad9259 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 #include <asm/rtc.h>
 
 enum {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 3855ea4c21c8..8028082527c5 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 #include <asm/rtc.h>
 
 #define INTC_ICR1       0xA4140010UL
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index dab193293f20..7371abf64f80 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
         {
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index ae3603aca615..ec884039b914 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct resource rtc_resources[] = {
         [0] = {
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 85f81579b97e..254c5c55ab91 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
         UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index c0a3f079dfdc..6d4f50cd4aaf 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
         {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 967e8b69a2f8..f26b5cdad0d1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -12,7 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
         {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 73c778d40d13..b98b4bc93ec9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -10,9 +10,9 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/serial_sci.h>
 #include <linux/mm.h>
 #include <asm/mmzone.h>
-#include <asm/sci.h>
 
 static struct resource usbf_resources[] = {
         [0] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index eabd5386812d..07c988dc9de6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct resource rtc_resources[] = {
         [0] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 32f4f59a837b..b9cec48b1808 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
         {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 293004b526ff..18dbbe23fea1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -11,7 +11,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct resource rtc_resources[] = {
         [0] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 74b60e96cdf4..621e7329ec63 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -10,10 +10,10 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <asm/mmzone.h>
-#include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
         {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 4dc958b6b314..bd35f32534b9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -10,9 +10,9 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <asm/mmzone.h>
-#include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
         {
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 313d1620ae8e..59e9344e7a0d 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -3,6 +3,9 @@
 #include <linux/init.h>
 #include <linux/proc_fs.h>
 #include <linux/string.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
 
 #include <asm/auxio.h>
 
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index eeb5a2fc788d..bd76482077be 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -525,10 +525,10 @@ static void dr_cpu_mark(struct ds_data *resp, int cpu, int ncpus,
         }
 }
 
-static int dr_cpu_configure(struct ds_info *dp,
-                            struct ds_cap_state *cp,
-                            u64 req_num,
-                            cpumask_t *mask)
+static int __cpuinit dr_cpu_configure(struct ds_info *dp,
+                                      struct ds_cap_state *cp,
+                                      u64 req_num,
+                                      cpumask_t *mask)
 {
         struct ds_data *resp;
         int resp_len, ncpus, cpu;
@@ -623,9 +623,9 @@ static int dr_cpu_unconfigure(struct ds_info *dp,
         return 0;
 }
 
-static void dr_cpu_data(struct ds_info *dp,
-                        struct ds_cap_state *cp,
-                        void *buf, int len)
+static void __cpuinit dr_cpu_data(struct ds_info *dp,
+                                  struct ds_cap_state *cp,
+                                  void *buf, int len)
 {
         struct ds_data *data = buf;
         struct dr_cpu_tag *tag = (struct dr_cpu_tag *) (data + 1);
diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c
index 856659bb1311..910083589569 100644
--- a/arch/sparc64/kernel/mdesc.c
+++ b/arch/sparc64/kernel/mdesc.c
@@ -758,7 +758,7 @@ static void __devinit get_mondo_data(struct mdesc_handle *hp, u64 mp,
         get_one_mondo_bits(val, &tb->nonresum_qmask, 2);
 }
 
-void __devinit mdesc_fill_in_cpu_data(cpumask_t mask)
+void __cpuinit mdesc_fill_in_cpu_data(cpumask_t mask)
 {
         struct mdesc_handle *hp = mdesc_grab();
         u64 mp;
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index e2027f27c0fe..2650d0d33ac2 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -244,16 +244,8 @@ static void do_kernel_fault(struct pt_regs *regs, int si_code, int fault_code,
         if (regs->tstate & TSTATE_PRIV) {
                 const struct exception_table_entry *entry;
 
-                if (asi == ASI_P && (insn & 0xc0800000) == 0xc0800000) {
-                        if (insn & 0x2000)
-                                asi = (regs->tstate >> 24);
-                        else
-                                asi = (insn >> 5);
-                }
-        
-                /* Look in asi.h: All _S asis have LS bit set */
-                if ((asi & 0x1) &&
-                    (entry = search_exception_tables(regs->tpc))) {
+                entry = search_exception_tables(regs->tpc);
+                if (entry) {
                         regs->tpc = entry->fixup;
                         regs->tnpc = regs->tpc + 4;
                         return;
@@ -294,7 +286,7 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
                 unsigned long tpc = regs->tpc;
 
                 /* Sanity check the PC. */
-                if ((tpc >= KERNBASE && tpc < (unsigned long) _etext) ||
+                if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) ||
                     (tpc >= MODULES_VADDR && tpc < MODULES_END)) {
                         /* Valid, no problems... */
                 } else {
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 9e6bca266d88..b5c30416fdac 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -1010,7 +1010,8 @@ static struct linux_prom64_registers pall[MAX_BANKS] __initdata;
 static int pall_ents __initdata;
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
-static unsigned long kernel_map_range(unsigned long pstart, unsigned long pend, pgprot_t prot)
+static unsigned long __ref kernel_map_range(unsigned long pstart,
+                                            unsigned long pend, pgprot_t prot)
 {
         unsigned long vstart = PAGE_OFFSET + pstart;
         unsigned long vend = PAGE_OFFSET + pend;
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index fc50d2f959d1..e8cb9ff183e9 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -128,8 +128,6 @@ void *get_current(void)
         return current;
 }
 
-extern void schedule_tail(struct task_struct *prev);
-
 /*
  * This is called magically, by its address being stuffed in a jmp_buf
  * and being longjmp-d to.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index e09a6b73a1aa..6d50064db182 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -377,6 +377,19 @@ config X86_OOSTORE
         def_bool y
         depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
 
+#
+# P6_NOPs are a relatively minor optimization that require a family >=
+# 6 processor, except that it is broken on certain VIA chips.
+# Furthermore, AMD chips prefer a totally different sequence of NOPs
+# (which work on all CPUs).  As a result, disallow these if we're
+# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
+# x86-64 capable chips); the list of processors in the right-hand clause
+# are the cores that benefit from this optimization.
+#
+config X86_P6_NOP
+        def_bool y
+        depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || PENTIUM4)
+
 config X86_TSC
         def_bool y
         depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
@@ -390,6 +403,7 @@ config X86_CMOV
 config X86_MINIMUM_CPU_FAMILY
         int
         default "64" if X86_64
+        default "6" if X86_32 && X86_P6_NOP
         default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
         default "3"
 
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index 378353956b5d..e77d89f9e8aa 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -37,6 +37,12 @@ static int detect_memory_e820(void)
                       "=m" (*desc)
                     : "D" (desc), "d" (SMAP), "a" (0xe820));
 
+                /* BIOSes which terminate the chain with CF = 1 as opposed
+                   to %ebx = 0 don't always report the SMAP signature on
+                   the final, failing, probe. */
+                if (err)
+                        break;
+
                 /* Some BIOSes stop returning SMAP in the middle of
                    the search loop.  We don't know exactly how the BIOS
                    screwed up the map at that point, we might have a
@@ -47,9 +53,6 @@ static int detect_memory_e820(void)
                         break;
                 }
 
-                if (err)
-                        break;
-
                 count++;
                 desc++;
         } while (next && count < E820MAX);
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index a33d53017997..8ea040124f7d 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -128,13 +128,11 @@ void foo(void)
         OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
 #endif
 
-#ifdef CONFIG_LGUEST_GUEST
+#if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
         BLANK();
         OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
         OFFSET(LGUEST_DATA_pgdir, lguest_data, pgdir);
-#endif
 
-#ifdef CONFIG_LGUEST
         BLANK();
         OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc);
         OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f86a3c4a2669..a38aafaefc23 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -504,7 +504,7 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 
         /* Clear all flags overriden by options */
         for (i = 0; i < NCAPINTS; i++)
-                c->x86_capability[i] ^= cleared_cpu_caps[i];
+                c->x86_capability[i] &= ~cleared_cpu_caps[i];
 
         /* Init Machine Check Exception if available. */
         mcheck_init(c);
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index b6e136f23d3d..be83336fddba 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -43,6 +43,7 @@
 #include <asm/uaccess.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
+#include <asm/kvm_para.h>
 #include "mtrr.h"
 
 u32 num_var_ranges = 0;
@@ -649,6 +650,7 @@ static __init int amd_special_default_mtrr(void)
 
 /**
  * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
+ * @end_pfn: ending page frame number
  *
  * Some buggy BIOSes don't setup the MTRRs properly for systems with certain
  * memory configurations.  This routine checks that the highest MTRR matches
@@ -688,8 +690,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
         /* kvm/qemu doesn't have mtrr set right, don't trim them all */
         if (!highest_pfn) {
-                printk(KERN_WARNING "WARNING: strange, CPU MTRRs all blank?\n");
-                WARN_ON(1);
+                if (!kvm_para_available()) {
+                        printk(KERN_WARNING
+                                "WARNING: strange, CPU MTRRs all blank?\n");
+                        WARN_ON(1);
+                }
                 return 0;
         }
 
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index 200fb3f9ebfb..e8b422c1c512 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -76,13 +76,6 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
         /* All Transmeta CPUs have a constant TSC */
         set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
         
-        /* If we can run i686 user-space code, call us an i686 */
-#define USER686 ((1 << X86_FEATURE_TSC)|\
-                 (1 << X86_FEATURE_CX8)|\
-                 (1 << X86_FEATURE_CMOV))
-        if (c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686)
-                c->x86 = 6;
-
 #ifdef CONFIG_SYSCTL
         /* randomize_va_space slows us down enormously;
            it probably triggers retranslation of x86->native bytecode */
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 2ad9a1bc6a73..c20c9e7e08dd 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -453,6 +453,7 @@ ENTRY(stub_execve)
         CFI_REGISTER rip, r11
         SAVE_REST
         FIXUP_TOP_OF_STACK %r11
+        movq %rsp, %rcx
         call sys_execve
         RESTORE_TOP_OF_STACK %r11
         movq %rax,RAX(%rsp)
@@ -1036,15 +1037,16 @@ ENDPROC(child_rip)
  *      rdi: name, rsi: argv, rdx: envp
  *
  * We want to fallback into:
- *      extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs)
+ *      extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs *regs)
  *
  * do_sys_execve asm fallback arguments:
- *      rdi: name, rsi: argv, rdx: envp, fake frame on the stack
+ *      rdi: name, rsi: argv, rdx: envp, rcx: fake frame on the stack
  */
 ENTRY(kernel_execve)
         CFI_STARTPROC
         FAKE_STACK_FRAME $0
         SAVE_ALL        
+        movq %rsp,%rcx
         call sys_execve
         movq %rax, RAX(%rsp)    
         RESTORE_REST
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 25eb98540a41..fd8ca53943a8 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -606,7 +606,7 @@ ENTRY(_stext)
 .section ".bss.page_aligned","wa"
         .align PAGE_SIZE_asm
 #ifdef CONFIG_X86_PAE
-ENTRY(swapper_pg_pmd)
+swapper_pg_pmd:
         .fill 1024*KPMDS,4,0
 #else
 ENTRY(swapper_pg_dir)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index eb415043a929..a007454133a3 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -379,18 +379,24 @@ NEXT_PAGE(level2_ident_pgt)
         /* Since I easily can, map the first 1G.
          * Don't set NX because code runs from these pages.
          */
-        PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
+        PMDS(0, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
 
 NEXT_PAGE(level2_kernel_pgt)
-        /* 40MB kernel mapping. The kernel code cannot be bigger than that.
-           When you change this change KERNEL_TEXT_SIZE in page.h too. */
-        /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
-        PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
-        /* Module mapping starts here */
-        .fill   (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
+        /*
+         * 128 MB kernel mapping. We spend a full page on this pagetable
+         * anyway.
+         *
+         * The kernel code+data+bss must not be bigger than that.
+         *
+         * (NOTE: at +128MB starts the module area, see MODULES_VADDR.
+         *  If you want to increase this then increase MODULES_VADDR
+         *  too.)
+         */
+        PMDS(0, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
+                KERNEL_IMAGE_SIZE/PMD_SIZE)
 
 NEXT_PAGE(level2_spare_pgt)
-        .fill   512,8,0
+        .fill   512, 8, 0
 
 #undef PMDS
 #undef NEXT_PAGE
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 429d084e014d..235fd6c77504 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -368,8 +368,8 @@ static int hpet_clocksource_register(void)
         return 0;
 }
 
-/*
- * Try to setup the HPET timer
+/**
+ * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
  */
 int __init hpet_enable(void)
 {
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index 5b3ce7934363..3d01e47777db 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -15,6 +15,7 @@ static struct files_struct init_files = INIT_FILES;
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */
 
 /*
  * Initial thread structure.
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a7d50a547dc2..be3c7a299f02 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -603,11 +603,13 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
         }
 #endif
 
+#ifdef X86_BTS
         if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
                 ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
 
         if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
                 ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
+#endif
 
 
         if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index b0cc8f0136d8..3baf9b9f4c87 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -604,11 +604,13 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
                 memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
         }
 
+#ifdef X86_BTS
         if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
                 ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
 
         if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
                 ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
+#endif
 }
 
 /*
@@ -730,16 +732,16 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
  */
 asmlinkage
 long sys_execve(char __user *name, char __user * __user *argv,
-                char __user * __user *envp, struct pt_regs regs)
+                char __user * __user *envp, struct pt_regs *regs)
 {
         long error;
         char * filename;
 
         filename = getname(name);
         error = PTR_ERR(filename);
-        if (IS_ERR(filename)) 
+        if (IS_ERR(filename))
                 return error;
-        error = do_execve(filename, argv, envp, &regs); 
+        error = do_execve(filename, argv, envp, regs);
         putname(filename);
         return error;
 }
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index d862e396b099..f41fdc98efb1 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -544,6 +544,8 @@ static int ptrace_set_debugreg(struct task_struct *child,
         return 0;
 }
 
+#ifdef X86_BTS
+
 static int ptrace_bts_get_size(struct task_struct *child)
 {
         if (!child->thread.ds_area_msr)
@@ -826,6 +828,7 @@ void ptrace_bts_take_timestamp(struct task_struct *tsk,
 
         ptrace_bts_write_record(tsk, &rec);
 }
+#endif /* X86_BTS */
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -839,7 +842,9 @@ void ptrace_disable(struct task_struct *child)
         clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
 #endif
         if (child->thread.ds_area_msr) {
+#ifdef X86_BTS
                 ptrace_bts_realloc(child, 0, 0);
+#endif
                 child->thread.debugctlmsr &= ~ds_debugctl_mask();
                 if (!child->thread.debugctlmsr)
                         clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
@@ -961,6 +966,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                 break;
 #endif
 
+        /*
+         * These bits need more cooking - not enabled yet:
+         */
+#ifdef X86_BTS
         case PTRACE_BTS_CONFIG:
                 ret = ptrace_bts_config
                         (child, data, (struct ptrace_bts_config __user *)addr);
@@ -988,6 +997,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
                 ret = ptrace_bts_drain
                         (child, data, (struct bts_struct __user *) addr);
                 break;
+#endif
 
         default:
                 ret = ptrace_request(child, request, addr, data);
@@ -1226,12 +1236,14 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data)
         case PTRACE_SETOPTIONS:
         case PTRACE_SET_THREAD_AREA:
         case PTRACE_GET_THREAD_AREA:
+#ifdef X86_BTS
         case PTRACE_BTS_CONFIG:
         case PTRACE_BTS_STATUS:
         case PTRACE_BTS_SIZE:
         case PTRACE_BTS_GET:
         case PTRACE_BTS_CLEAR:
         case PTRACE_BTS_DRAIN:
+#endif
                 return sys_ptrace(request, pid, addr, data);
 
         default:
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 6fd804f07821..7637dc91c79b 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -1021,7 +1021,7 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 
         /* Clear all flags overriden by options */
         for (i = 0; i < NCAPINTS; i++)
-                c->x86_capability[i] ^= cleared_cpu_caps[i];
+                c->x86_capability[i] &= ~cleared_cpu_caps[i];
 
 #ifdef CONFIG_X86_MCE
         mcheck_init(c);
diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c
index d53bd6fcb428..0880f2c388a9 100644
--- a/arch/x86/kernel/smpboot_64.c
+++ b/arch/x86/kernel/smpboot_64.c
@@ -554,10 +554,10 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid)
         int timeout;
         unsigned long start_rip;
         struct create_idle c_idle = {
-                .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
                 .cpu = cpu,
                 .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
         };
+        INIT_WORK(&c_idle.work, do_fork_idle);
 
         /* allocate memory for gdts of secondary cpus. Hotplug is considered */
         if (!cpu_gdt_descr[cpu].address &&
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 02f0f61f5b11..c28c342c162f 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -25,6 +25,8 @@ static int save_stack_stack(void *data, char *name)
 static void save_stack_address(void *data, unsigned long addr, int reliable)
 {
         struct stack_trace *trace = data;
+        if (!reliable)
+                return;
         if (trace->skip > 0) {
                 trace->skip--;
                 return;
@@ -37,6 +39,8 @@ static void
 save_stack_address_nosched(void *data, unsigned long addr, int reliable)
 {
         struct stack_trace *trace = (struct stack_trace *)data;
+        if (!reliable)
+                return;
         if (in_sched_functions(addr))
                 return;
         if (trace->skip > 0) {
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index 6dfd4e76661a..022bcaa3b42e 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -91,7 +91,9 @@ int do_set_thread_area(struct task_struct *p, int idx,
 
 asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
 {
-        return do_set_thread_area(current, -1, u_info, 1);
+        int ret = do_set_thread_area(current, -1, u_info, 1);
+        prevent_tail_call(ret);
+        return ret;
 }
 
 
@@ -139,7 +141,9 @@ int do_get_thread_area(struct task_struct *p, int idx,
 
 asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
 {
-        return do_get_thread_area(current, -1, u_info);
+        int ret = do_get_thread_area(current, -1, u_info);
+        prevent_tail_call(ret);
+        return ret;
 }
 
 int regset_tls_active(struct task_struct *target,
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index 43517e324be8..f14cfd9d1f94 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -28,7 +28,8 @@ EXPORT_SYMBOL_GPL(tsc_khz);
 static int __init tsc_setup(char *str)
 {
         printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
-                                "cannot disable TSC.\n");
+                                "cannot disable TSC completely.\n");
+        mark_tsc_unstable("user disabled TSC");
         return 1;
 }
 #else
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 3f8242774580..edff4c985485 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -44,11 +44,6 @@
 
 #define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr)))
 #define __syscall_clobber "r11","cx","memory"
-#define __pa_vsymbol(x)                 \
-        ({unsigned long v;              \
-        extern char __vsyscall_0;       \
-          asm("" : "=r" (v) : "0" (x)); \
-          ((v - VSYSCALL_START) + __pa_symbol(&__vsyscall_0)); })
 
 /*
  * vsyscall_gtod_data contains data that is :
@@ -102,7 +97,7 @@ static __always_inline void do_get_tz(struct timezone * tz)
 static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz)
 {
         int ret;
-        asm volatile("vsysc2: syscall"
+        asm volatile("syscall"
                 : "=a" (ret)
                 : "0" (__NR_gettimeofday),"D" (tv),"S" (tz)
                 : __syscall_clobber );
@@ -112,7 +107,7 @@ static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz)
 static __always_inline long time_syscall(long *t)
 {
         long secs;
-        asm volatile("vsysc1: syscall"
+        asm volatile("syscall"
                 : "=a" (secs)
                 : "0" (__NR_time),"D" (t) : __syscall_clobber);
         return secs;
@@ -228,42 +223,11 @@ long __vsyscall(3) venosys_1(void)
 
 #ifdef CONFIG_SYSCTL
 
-#define SYSCALL 0x050f
-#define NOP2    0x9090
-
-/*
- * NOP out syscall in vsyscall page when not needed.
- */
-static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
-                        void __user *buffer, size_t *lenp, loff_t *ppos)
+static int
+vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
+                       void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-        extern u16 vsysc1, vsysc2;
-        u16 __iomem *map1;
-        u16 __iomem *map2;
-        int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
-        if (!write)
-                return ret;
-        /* gcc has some trouble with __va(__pa()), so just do it this
-           way. */
-        map1 = ioremap(__pa_vsymbol(&vsysc1), 2);
-        if (!map1)
-                return -ENOMEM;
-        map2 = ioremap(__pa_vsymbol(&vsysc2), 2);
-        if (!map2) {
-                ret = -ENOMEM;
-                goto out;
-        }
-        if (!vsyscall_gtod_data.sysctl_enabled) {
-                writew(SYSCALL, map1);
-                writew(SYSCALL, map2);
-        } else {
-                writew(NOP2, map1);
-                writew(NOP2, map2);
-        }
-        iounmap(map2);
-out:
-        iounmap(map1);
-        return ret;
+        return proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
 }
 
 static ctl_table kernel_table2[] = {
@@ -279,7 +243,6 @@ static ctl_table kernel_root_table2[] = {
           .child = kernel_table2 },
         {}
 };
-
 #endif
 
 /* Assume __initcall executes before all user space. Hopefully kmod
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 5afdde4895dc..cccb38a59653 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -57,6 +57,7 @@
 #include <linux/lguest_launcher.h>
 #include <linux/virtio_console.h>
 #include <linux/pm.h>
+#include <asm/lguest.h>
 #include <asm/paravirt.h>
 #include <asm/param.h>
 #include <asm/page.h>
@@ -75,15 +76,6 @@
  * behaving in simplified but equivalent ways.  In particular, the Guest is the
  * same kernel as the Host (or at least, built from the same source code). :*/
 
-/* Declarations for definitions in lguest_guest.S */
-extern char lguest_noirq_start[], lguest_noirq_end[];
-extern const char lgstart_cli[], lgend_cli[];
-extern const char lgstart_sti[], lgend_sti[];
-extern const char lgstart_popf[], lgend_popf[];
-extern const char lgstart_pushf[], lgend_pushf[];
-extern const char lgstart_iret[], lgend_iret[];
-extern void lguest_iret(void);
-
 struct lguest_data lguest_data = {
         .hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
         .noirq_start = (u32)lguest_noirq_start,
@@ -489,7 +481,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
         *pmdp = pmdval;
         lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
-                   (__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
+                   (__pa(pmdp)&(PAGE_SIZE-1)), 0);
 }
 
 /* There are a couple of legacy places where the kernel sets a PTE, but we
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index bb652f5a93fb..a02a14f0f324 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -172,8 +172,9 @@ set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot)
 }
 
 /*
- * The head.S code sets up the kernel high mapping from:
- * __START_KERNEL_map to __START_KERNEL_map + KERNEL_TEXT_SIZE
+ * The head.S code sets up the kernel high mapping:
+ *
+ *   from __START_KERNEL_map to __START_KERNEL_map + size (== _end-_text)
  *
  * phys_addr holds the negative offset to the kernel, which is added
  * to the compile time generated pmds. This results in invalid pmds up
@@ -515,14 +516,6 @@ void __init mem_init(void)
 
         /* clear_bss() already clear the empty_zero_page */
 
-        /* temporary debugging - double check it's true: */
-        {
-                int i;
-
-                for (i = 0; i < 1024; i++)
-                        WARN_ON_ONCE(empty_zero_page[i]);
-        }
-
         reservedpages = 0;
 
         /* this will put all low memory onto the freelists */
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 882328efc3db..ac3c959e271d 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -162,7 +162,7 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
         area->phys_addr = phys_addr;
         vaddr = (unsigned long) area->addr;
         if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
-                remove_vm_area((void *)(vaddr & PAGE_MASK));
+                free_vm_area(area);
                 return NULL;
         }
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 464d8fc21ce6..14e48b5a94ba 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -44,6 +44,12 @@ static inline unsigned long highmap_end_pfn(void)
 
 #endif
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+# define debug_pagealloc 1
+#else
+# define debug_pagealloc 0
+#endif
+
 static inline int
 within(unsigned long addr, unsigned long start, unsigned long end)
 {
@@ -355,45 +361,48 @@ out_unlock:
 
 static LIST_HEAD(page_pool);
 static unsigned long pool_size, pool_pages, pool_low;
-static unsigned long pool_used, pool_failed, pool_refill;
+static unsigned long pool_used, pool_failed;
 
-static void cpa_fill_pool(void)
+static void cpa_fill_pool(struct page **ret)
 {
-        struct page *p;
         gfp_t gfp = GFP_KERNEL;
+        unsigned long flags;
+        struct page *p;
 
-        /* Do not allocate from interrupt context */
-        if (in_irq() || irqs_disabled())
-                return;
         /*
-         * Check unlocked. I does not matter when we have one more
-         * page in the pool. The bit lock avoids recursive pool
-         * allocations:
+         * Avoid recursion (on debug-pagealloc) and also signal
+         * our priority to get to these pagetables:
          */
-        if (pool_pages >= pool_size || test_and_set_bit_lock(0, &pool_refill))
+        if (current->flags & PF_MEMALLOC)
                 return;
+        current->flags |= PF_MEMALLOC;
 
-#ifdef CONFIG_DEBUG_PAGEALLOC
         /*
-         * We could do:
-         * gfp = in_atomic() ? GFP_ATOMIC : GFP_KERNEL;
-         * but this fails on !PREEMPT kernels
+         * Allocate atomically from atomic contexts:
          */
-        gfp =  GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN;
-#endif
+        if (in_atomic() || irqs_disabled() || debug_pagealloc)
+                gfp =  GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN;
 
-        while (pool_pages < pool_size) {
+        while (pool_pages < pool_size || (ret && !*ret)) {
                 p = alloc_pages(gfp, 0);
                 if (!p) {
                         pool_failed++;
                         break;
                 }
-                spin_lock_irq(&pgd_lock);
+                /*
+                 * If the call site needs a page right now, provide it:
+                 */
+                if (ret && !*ret) {
+                        *ret = p;
+                        continue;
+                }
+                spin_lock_irqsave(&pgd_lock, flags);
                 list_add(&p->lru, &page_pool);
                 pool_pages++;
-                spin_unlock_irq(&pgd_lock);
+                spin_unlock_irqrestore(&pgd_lock, flags);
         }
-        clear_bit_unlock(0, &pool_refill);
+
+        current->flags &= ~PF_MEMALLOC;
 }
 
 #define SHIFT_MB                (20 - PAGE_SHIFT)
@@ -414,11 +423,15 @@ void __init cpa_init(void)
          * GiB. Shift MiB to Gib and multiply the result by
          * POOL_PAGES_PER_GB:
          */
-        gb = ((si.totalram >> SHIFT_MB) + ROUND_MB_GB) >> SHIFT_MB_GB;
-        pool_size = POOL_PAGES_PER_GB * gb;
+        if (debug_pagealloc) {
+                gb = ((si.totalram >> SHIFT_MB) + ROUND_MB_GB) >> SHIFT_MB_GB;
+                pool_size = POOL_PAGES_PER_GB * gb;
+        } else {
+                pool_size = 1;
+        }
         pool_low = pool_size;
 
-        cpa_fill_pool();
+        cpa_fill_pool(NULL);
         printk(KERN_DEBUG
                "CPA: page pool initialized %lu of %lu pages preallocated\n",
                pool_pages, pool_size);
@@ -440,16 +453,20 @@ static int split_large_page(pte_t *kpte, unsigned long address)
         spin_lock_irqsave(&pgd_lock, flags);
         if (list_empty(&page_pool)) {
                 spin_unlock_irqrestore(&pgd_lock, flags);
-                return -ENOMEM;
+                base = NULL;
+                cpa_fill_pool(&base);
+                if (!base)
+                        return -ENOMEM;
+                spin_lock_irqsave(&pgd_lock, flags);
+        } else {
+                base = list_first_entry(&page_pool, struct page, lru);
+                list_del(&base->lru);
+                pool_pages--;
+
+                if (pool_pages < pool_low)
+                        pool_low = pool_pages;
         }
 
-        base = list_first_entry(&page_pool, struct page, lru);
-        list_del(&base->lru);
-        pool_pages--;
-
-        if (pool_pages < pool_low)
-                pool_low = pool_pages;
-
         /*
          * Check for races, another CPU might have split this page
          * up for us already:
@@ -734,7 +751,8 @@ static int change_page_attr_set_clr(unsigned long addr, int numpages,
                 cpa_flush_all(cache);
 
 out:
-        cpa_fill_pool();
+        cpa_fill_pool(NULL);
+
         return ret;
 }
 
@@ -897,7 +915,7 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
          * Try to refill the page pool here. We can do this only after
          * the tlb flush.
          */
-        cpa_fill_pool();
+        cpa_fill_pool(NULL);
 }
 
 #ifdef CONFIG_HIBERNATION
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index f385a4b4a484..0a8f4742ef51 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -50,7 +50,9 @@ obj-$(VDSO64-y)			+= vdso-syms.lds
 sed-vdsosym := -e 's/^00*/0/' \
         -e 's/^\([0-9a-fA-F]*\) . \(VDSO[a-zA-Z0-9_]*\)$$/\2 = 0x\1;/p'
 quiet_cmd_vdsosym = VDSOSYM $@
-      cmd_vdsosym = $(NM) $< | sed -n $(sed-vdsosym) | LC_ALL=C sort > $@
+define cmd_vdsosym
+        $(NM) $< | LC_ALL=C sed -n $(sed-vdsosym) | LC_ALL=C sort > $@
+endef
 
 $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
         $(call if_changed,vdsosym)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 49e5358f481a..8b9ee27805fd 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -153,6 +153,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
         if (*ax == 1)
                 maskedx = ~((1 << X86_FEATURE_APIC) |  /* disable APIC */
                             (1 << X86_FEATURE_ACPI) |  /* disable ACPI */
+                            (1 << X86_FEATURE_SEP)  |  /* disable SEP */
                             (1 << X86_FEATURE_ACC));   /* thermal monitoring */
 
         asm(XEN_EMULATE_PREFIX "cpuid"
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fbc24358ada0..4fbcce758b04 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -113,7 +113,7 @@ int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
-int atapi_dmadir = 0;
+static int atapi_dmadir = 0;
 module_param(atapi_dmadir, int, 0444);
 MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
 
@@ -6567,6 +6567,8 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
         ata_lpm_enable(host);
 
         rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
+        if (rc == 0)
+                host->dev->power.power_state = mesg;
         return rc;
 }
 
@@ -6585,6 +6587,7 @@ void ata_host_resume(struct ata_host *host)
 {
         ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
                             ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
+        host->dev->power.power_state = PMSG_ON;
 
         /* reenable link pm */
         ata_lpm_disable(host);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0562b0a49f3b..7b1f1ee8131d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1694,12 +1694,17 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
         u8 *rbuf;
         unsigned int buflen, rc;
         struct scsi_cmnd *cmd = args->cmd;
+        unsigned long flags;
+
+        local_irq_save(flags);
 
         buflen = ata_scsi_rbuf_get(cmd, &rbuf);
         memset(rbuf, 0, buflen);
         rc = actor(args, rbuf, buflen);
         ata_scsi_rbuf_put(cmd, rbuf);
 
+        local_irq_restore(flags);
+
         if (rc == 0)
                 cmd->result = SAM_STAT_GOOD;
         args->done(cmd);
@@ -2473,6 +2478,9 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
                 if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
                         u8 *buf = NULL;
                         unsigned int buflen;
+                        unsigned long flags;
+
+                        local_irq_save(flags);
 
                         buflen = ata_scsi_rbuf_get(cmd, &buf);
 
@@ -2490,6 +2498,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
                         }
 
                         ata_scsi_rbuf_put(cmd, buf);
+
+                        local_irq_restore(flags);
                 }
 
                 cmd->result = SAM_STAT_GOOD;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6036dedfe377..aa884f71a12a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -56,7 +56,6 @@ enum {
 extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
 extern int atapi_enabled;
-extern int atapi_dmadir;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 69f651e0bc98..840d1c4a7850 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -45,6 +45,8 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi.h>
 #include <linux/libata.h>
 
 #ifdef CONFIG_PPC_OF
@@ -59,6 +61,7 @@ enum {
         /* ap->flags bits */
         K2_FLAG_SATA_8_PORTS            = (1 << 24),
         K2_FLAG_NO_ATAPI_DMA            = (1 << 25),
+        K2_FLAG_BAR_POS_3                       = (1 << 26),
 
         /* Taskfile registers offsets */
         K2_SATA_TF_CMD_OFFSET           = 0x00,
@@ -88,8 +91,10 @@ enum {
         /* Port stride */
         K2_SATA_PORT_OFFSET             = 0x100,
 
-        board_svw4                      = 0,
-        board_svw8                      = 1,
+        chip_svw4                       = 0,
+        chip_svw8                       = 1,
+        chip_svw42                      = 2,    /* bar 3 */
+        chip_svw43                      = 3,    /* bar 5 */
 };
 
 static u8 k2_stat_check_status(struct ata_port *ap);
@@ -97,10 +102,25 @@ static u8 k2_stat_check_status(struct ata_port *ap);
 
 static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc)
 {
+        u8 cmnd = qc->scsicmd->cmnd[0];
+
         if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA)
                 return -1;      /* ATAPI DMA not supported */
+        else {
+                switch (cmnd) {
+                case READ_10:
+                case READ_12:
+                case READ_16:
+                case WRITE_10:
+                case WRITE_12:
+                case WRITE_16:
+                        return 0;
+
+                default:
+                        return -1;
+                }
 
-        return 0;
+        }
 }
 
 static int k2_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@@ -354,7 +374,7 @@ static const struct ata_port_operations k2_sata_ops = {
 };
 
 static const struct ata_port_info k2_port_info[] = {
-        /* board_svw4 */
+        /* chip_svw4 */
         {
                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
                                   ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA,
@@ -363,7 +383,7 @@ static const struct ata_port_info k2_port_info[] = {
                 .udma_mask      = ATA_UDMA6,
                 .port_ops       = &k2_sata_ops,
         },
-        /* board_svw8 */
+        /* chip_svw8 */
         {
                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
                                   ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA |
@@ -373,6 +393,24 @@ static const struct ata_port_info k2_port_info[] = {
                 .udma_mask      = ATA_UDMA6,
                 .port_ops       = &k2_sata_ops,
         },
+        /* chip_svw42 */
+        {
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+                                  ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3,
+                .pio_mask       = 0x1f,
+                .mwdma_mask     = 0x07,
+                .udma_mask      = ATA_UDMA6,
+                .port_ops       = &k2_sata_ops,
+        },
+        /* chip_svw43 */
+        {
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+                                  ATA_FLAG_MMIO,
+                .pio_mask       = 0x1f,
+                .mwdma_mask     = 0x07,
+                .udma_mask      = ATA_UDMA6,
+                .port_ops       = &k2_sata_ops,
+        },
 };
 
 static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
@@ -402,7 +440,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
                 { &k2_port_info[ent->driver_data], NULL };
         struct ata_host *host;
         void __iomem *mmio_base;
-        int n_ports, i, rc;
+        int n_ports, i, rc, bar_pos;
 
         if (!printed_version++)
                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -416,6 +454,9 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
         if (!host)
                 return -ENOMEM;
 
+        bar_pos = 5;
+        if (ppi[0]->flags & K2_FLAG_BAR_POS_3)
+                bar_pos = 3;
         /*
          * If this driver happens to only be useful on Apple's K2, then
          * we should check that here as it has a normal Serverworks ID
@@ -428,17 +469,23 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
          * Check if we have resources mapped at all (second function may
          * have been disabled by firmware)
          */
-        if (pci_resource_len(pdev, 5) == 0)
+        if (pci_resource_len(pdev, bar_pos) == 0) {
+                /* In IDE mode we need to pin the device to ensure that
+                        pcim_release does not clear the busmaster bit in config
+                        space, clearing causes busmaster DMA to fail on
+                        ports 3 & 4 */
+                pcim_pin_device(pdev);
                 return -ENODEV;
+        }
 
         /* Request and iomap PCI regions */
-        rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+        rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME);
         if (rc == -EBUSY)
                 pcim_pin_device(pdev);
         if (rc)
                 return rc;
         host->iomap = pcim_iomap_table(pdev);
-        mmio_base = host->iomap[5];
+        mmio_base = host->iomap[bar_pos];
 
         /* different controllers have different number of ports - currently 4 or 8 */
         /* All ports are on the same function. Multi-function device is no
@@ -483,11 +530,13 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
  * controller
  * */
 static const struct pci_device_id k2_sata_pci_tbl[] = {
-        { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 },
-        { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 },
-        { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 },
-        { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 },
-        { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 },
+        { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 },
+        { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 },
+        { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 },
+        { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 },
+        { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 },
+        { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 },
+        { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 },
 
         { }
 };
diff --git a/drivers/base/transport_class.c b/drivers/base/transport_class.c
index f25e7c6b2d27..40bca48abc12 100644
--- a/drivers/base/transport_class.c
+++ b/drivers/base/transport_class.c
@@ -126,9 +126,7 @@ static int transport_setup_classdev(struct attribute_container *cont,
 }
 
 /**
- * transport_setup_device - declare a new dev for transport class association
- *                          but don't make it visible yet.
- *
+ * transport_setup_device - declare a new dev for transport class association but don't make it visible yet.
  * @dev: the generic device representing the entity being added
  *
  * Usually, dev represents some component in the HBA system (either
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 78b151c4d20f..5c3142b6f1fc 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -110,8 +110,8 @@ static int rtc_has_irq = 1;
 #define hpet_set_rtc_irq_bit(arg)               0
 #define hpet_rtc_timer_init()                   do { } while (0)
 #define hpet_rtc_dropped_irq()                  0
-#define hpet_register_irq_handler(h)            0
-#define hpet_unregister_irq_handler(h)          0
+#define hpet_register_irq_handler(h)            ({ 0; })
+#define hpet_unregister_irq_handler(h)          ({ 0; })
 #ifdef RTC_IRQ
 static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 {
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index dfea2bde162b..f577daedb630 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -73,8 +73,8 @@
 #define XHI_BUFFER_START 0
 
 /**
- * buffer_icap_get_status: Get the contents of the status register.
- * @parameter base_address: is the base address of the device
+ * buffer_icap_get_status - Get the contents of the status register.
+ * @base_address: is the base address of the device
  *
  * The status register contains the ICAP status and the done bit.
  *
@@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_get_bram: Reads data from the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset from which the data should be read.
+ * buffer_icap_get_bram - Reads data from the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset from which the data should be read.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is not busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is not busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_set_size: Set the size register.
- * @parameter base_address: is the base address of the device
- * @parameter data: The size in bytes.
+ * buffer_icap_set_size - Set the size register.
+ * @base_address: is the base address of the device
+ * @data: The size in bytes.
  *
  * The size register holds the number of 8 bit bytes to transfer between
  * bram and the icap (or icap to bram).
@@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_mSetoffsetReg: Set the bram offset register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_offset - Set the bram offset register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The bram offset register holds the starting bram address to transfer
  * data from during configuration or write data to during readback.
@@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The RNC register determines the direction of the data transfer.  It
  * controls whether a configuration or readback take place.  Writing to
@@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_bram: Write data to the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset at which the data should be written.
- * @parameter data: The value to be written to the bram offset.
+ * buffer_icap_set_bram - Write data to the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset at which the data should be written.
+ * @data: The value to be written to the bram offset.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
@@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
@@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * Writing to the status register resets the ICAP logic in an internal
  * version of the core.  For the version of the core published in EDK,
@@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * buffer_icap_set_configuration: Load a partial bitstream from system memory.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Kernel address of the partial bitstream.
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_set_configuration - Load a partial bitstream from system memory.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Kernel address of the partial bitstream.
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
                              u32 size)
@@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 };
 
 /**
- * buffer_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
                              u32 size)
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 0988314694a6..6f45dbd47125 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -94,9 +94,9 @@
 
 
 /**
- * fifo_icap_fifo_write: Write data to the write FIFO.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the 32-bit value to be written to the FIFO.
+ * fifo_icap_fifo_write - Write data to the write FIFO.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the 32-bit value to be written to the FIFO.
  *
  * This function will silently fail if the fifo is full.
  **/
@@ -108,8 +108,8 @@ static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_fifo_read: Read data from the Read FIFO.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_fifo_read - Read data from the Read FIFO.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function will silently fail if the fifo is empty.
  **/
@@ -121,9 +121,9 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_set_read_size: Set the the size register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the size of the following read transaction, in words.
+ * fifo_icap_set_read_size - Set the the size register.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the size of the following read transaction, in words.
  **/
 static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
                 u32 data)
@@ -132,8 +132,8 @@ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_start_config: Initiate a configuration (write) to the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_config - Initiate a configuration (write) to the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 {
@@ -142,8 +142,8 @@ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_start_readback: Initiate a readback from the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_readback - Initiate a readback from the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 {
@@ -152,8 +152,8 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_busy: Return true if the ICAP is still processing a transaction.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_busy - Return true if the ICAP is still processing a transaction.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 {
@@ -163,8 +163,8 @@ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_write_fifo_vacancy: Query the write fifo available space.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_write_fifo_vacancy - Query the write fifo available space.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely pushed into the write fifo.
  **/
@@ -175,8 +175,8 @@ static inline u32 fifo_icap_write_fifo_vacancy(
 }
 
 /**
- * fifo_icap_read_fifo_occupancy: Query the read fifo available data.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_read_fifo_occupancy - Query the read fifo available data.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely read from the read fifo.
  **/
@@ -187,11 +187,11 @@ static inline u32 fifo_icap_read_fifo_occupancy(
 }
 
 /**
- * fifo_icap_set_configuration: Send configuration data to the ICAP.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter frame_buffer: a pointer to the data to be written to the
+ * fifo_icap_set_configuration - Send configuration data to the ICAP.
+ * @drvdata: a pointer to the drvdata.
+ * @frame_buffer: a pointer to the data to be written to the
  *              ICAP device.
- * @parameter num_words: the number of words (32 bit) to write to the ICAP
+ * @num_words: the number of words (32 bit) to write to the ICAP
  *              device.
 
  * This function writes the given user data to the Write FIFO in
@@ -266,10 +266,10 @@ int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * fifo_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  *
  * This function reads the specified number of words from the ICAP device in
  * the polled mode.
@@ -335,8 +335,8 @@ int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function forces the software reset of the complete HWICAP device.
  * All the registers will return to the default value and the FIFO is also
@@ -360,8 +360,8 @@ void fifo_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_flush_fifo: This function flushes the FIFOs in the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_flush_fifo - This function flushes the FIFOs in the device.
+ * @drvdata: a pointer to the drvdata.
  */
 void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata)
 {
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 24f6aef0fd3c..2284fa2a5a57 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -84,7 +84,7 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/proc_fs.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 #include <linux/sysctl.h>
 #include <linux/version.h>
 #include <linux/fs.h>
@@ -119,6 +119,7 @@ module_param(xhwicap_minor, int, S_IRUGO);
 
 /* An array, which is set to true when the device is registered. */
 static bool probed_devices[HWICAP_DEVICES];
+static struct mutex icap_sem;
 
 static struct class *icap_class;
 
@@ -199,14 +200,14 @@ static const struct config_registers v5_config_registers = {
 };
 
 /**
- * hwicap_command_desync: Send a DESYNC command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
+ * hwicap_command_desync - Send a DESYNC command to the ICAP port.
+ * @drvdata: a pointer to the drvdata.
  *
  * This command desynchronizes the ICAP After this command, a
  * bitstream containing a NULL packet, followed by a SYNCH packet is
  * required before the ICAP will recognize commands.
  */
-int hwicap_command_desync(struct hwicap_drvdata *drvdata)
+static int hwicap_command_desync(struct hwicap_drvdata *drvdata)
 {
         u32 buffer[4];
         u32 index = 0;
@@ -228,51 +229,18 @@ int hwicap_command_desync(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * hwicap_command_capture: Send a CAPTURE command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
- *
- * This command captures all of the flip flop states so they will be
- * available during readback.  One can use this command instead of
- * enabling the CAPTURE block in the design.
- */
-int hwicap_command_capture(struct hwicap_drvdata *drvdata)
-{
-        u32 buffer[7];
-        u32 index = 0;
-
-        /*
-         * Create the data to be written to the ICAP.
-         */
-        buffer[index++] = XHI_DUMMY_PACKET;
-        buffer[index++] = XHI_SYNC_PACKET;
-        buffer[index++] = XHI_NOOP_PACKET;
-        buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
-        buffer[index++] = XHI_CMD_GCAPTURE;
-        buffer[index++] = XHI_DUMMY_PACKET;
-        buffer[index++] = XHI_DUMMY_PACKET;
-
-        /*
-         * Write the data to the FIFO and intiate the transfer of data
-         * present in the FIFO to the ICAP device.
-         */
-        return drvdata->config->set_configuration(drvdata,
-                        &buffer[0], index);
-
-}
-
-/**
- * hwicap_get_configuration_register: Query a configuration register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter reg: a constant which represents the configuration
+ * hwicap_get_configuration_register - Query a configuration register.
+ * @drvdata: a pointer to the drvdata.
+ * @reg: a constant which represents the configuration
  *              register value to be returned.
  *              Examples:  XHI_IDCODE, XHI_FLR.
- * @parameter RegData: returns the value of the register.
+ * @reg_data: returns the value of the register.
  *
  * Sends a query packet to the ICAP and then receives the response.
  * The icap is left in Synched state.
  */
-int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
-                u32 reg, u32 *RegData)
+static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
+                u32 reg, u32 *reg_data)
 {
         int status;
         u32 buffer[6];
@@ -300,14 +268,14 @@ int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
         /*
          * Read the configuration register
          */
-        status = drvdata->config->get_configuration(drvdata, RegData, 1);
+        status = drvdata->config->get_configuration(drvdata, reg_data, 1);
         if (status)
                 return status;
 
         return 0;
 }
 
-int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
+static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
 {
         int status;
         u32 idcode;
@@ -344,7 +312,7 @@ int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
 }
 
 static ssize_t
-hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+hwicap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 {
         struct hwicap_drvdata *drvdata = file->private_data;
         ssize_t bytes_to_read = 0;
@@ -353,8 +321,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
         u32 bytes_remaining;
         int status;
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        status = mutex_lock_interruptible(&drvdata->sem);
+        if (status)
+                return status;
 
         if (drvdata->read_buffer_in_use) {
                 /* If there are leftover bytes in the buffer, just */
@@ -370,8 +339,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
                         goto error;
                 }
                 drvdata->read_buffer_in_use -= bytes_to_read;
-                memcpy(drvdata->read_buffer + bytes_to_read,
-                                drvdata->read_buffer, 4 - bytes_to_read);
+                memmove(drvdata->read_buffer,
+                       drvdata->read_buffer + bytes_to_read,
+                       4 - bytes_to_read);
         } else {
                 /* Get new data from the ICAP, and return was was requested. */
                 kbuf = (u32 *) get_zeroed_page(GFP_KERNEL);
@@ -414,18 +384,20 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
                         status = -EFAULT;
                         goto error;
                 }
-                memcpy(kbuf, drvdata->read_buffer, bytes_remaining);
+                memcpy(drvdata->read_buffer,
+                       kbuf,
+                       bytes_remaining);
                 drvdata->read_buffer_in_use = bytes_remaining;
                 free_page((unsigned long)kbuf);
         }
         status = bytes_to_read;
  error:
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
 static ssize_t
-hwicap_write(struct file *file, const char *buf,
+hwicap_write(struct file *file, const char __user *buf,
                 size_t count, loff_t *ppos)
 {
         struct hwicap_drvdata *drvdata = file->private_data;
@@ -435,8 +407,9 @@ hwicap_write(struct file *file, const char *buf,
         ssize_t len;
         ssize_t status;
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        status = mutex_lock_interruptible(&drvdata->sem);
+        if (status)
+                return status;
 
         left += drvdata->write_buffer_in_use;
 
@@ -465,7 +438,7 @@ hwicap_write(struct file *file, const char *buf,
                         memcpy(kbuf, drvdata->write_buffer,
                                         drvdata->write_buffer_in_use);
                         if (copy_from_user(
-                            (((char *)kbuf) + (drvdata->write_buffer_in_use)),
+                            (((char *)kbuf) + drvdata->write_buffer_in_use),
                             buf + written,
                             len - (drvdata->write_buffer_in_use))) {
                                 free_page((unsigned long)kbuf);
@@ -508,7 +481,7 @@ hwicap_write(struct file *file, const char *buf,
         free_page((unsigned long)kbuf);
         status = written;
  error:
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
@@ -519,8 +492,9 @@ static int hwicap_open(struct inode *inode, struct file *file)
 
         drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev);
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        status = mutex_lock_interruptible(&drvdata->sem);
+        if (status)
+                return status;
 
         if (drvdata->is_open) {
                 status = -EBUSY;
@@ -539,7 +513,7 @@ static int hwicap_open(struct inode *inode, struct file *file)
         drvdata->is_open = 1;
 
  error:
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
@@ -549,8 +523,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
         int i;
         int status = 0;
 
-        if (down_interruptible(&drvdata->sem))
-                return -ERESTARTSYS;
+        mutex_lock(&drvdata->sem);
 
         if (drvdata->write_buffer_in_use) {
                 /* Flush write buffer. */
@@ -569,7 +542,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
 
  error:
         drvdata->is_open = 0;
-        up(&drvdata->sem);
+        mutex_unlock(&drvdata->sem);
         return status;
 }
 
@@ -592,31 +565,36 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 
         dev_info(dev, "Xilinx icap port driver\n");
 
+        mutex_lock(&icap_sem);
+
         if (id < 0) {
                 for (id = 0; id < HWICAP_DEVICES; id++)
                         if (!probed_devices[id])
                                 break;
         }
         if (id < 0 || id >= HWICAP_DEVICES) {
+                mutex_unlock(&icap_sem);
                 dev_err(dev, "%s%i too large\n", DRIVER_NAME, id);
                 return -EINVAL;
         }
         if (probed_devices[id]) {
+                mutex_unlock(&icap_sem);
                 dev_err(dev, "cannot assign to %s%i; it is already in use\n",
                         DRIVER_NAME, id);
                 return -EBUSY;
         }
 
         probed_devices[id] = 1;
+        mutex_unlock(&icap_sem);
 
         devt = MKDEV(xhwicap_major, xhwicap_minor + id);
 
-        drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+        drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
         if (!drvdata) {
                 dev_err(dev, "Couldn't allocate device private record\n");
-                return -ENOMEM;
+                retval = -ENOMEM;
+                goto failed0;
         }
-        memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata));
         dev_set_drvdata(dev, (void *)drvdata);
 
         if (!regs_res) {
@@ -648,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
         drvdata->config = config;
         drvdata->config_regs = config_regs;
 
-        init_MUTEX(&drvdata->sem);
+        mutex_init(&drvdata->sem);
         drvdata->is_open = 0;
 
         dev_info(dev, "ioremap %lx to %p with size %x\n",
@@ -663,7 +641,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
                 goto failed3;
         }
         /*  devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */
-        class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME);
+        device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id);
         return 0;               /* success */
 
  failed3:
@@ -675,6 +653,11 @@ static int __devinit hwicap_setup(struct device *dev, int id,
  failed1:
         kfree(drvdata);
 
+ failed0:
+        mutex_lock(&icap_sem);
+        probed_devices[id] = 0;
+        mutex_unlock(&icap_sem);
+
         return retval;
 }
 
@@ -699,14 +682,16 @@ static int __devexit hwicap_remove(struct device *dev)
         if (!drvdata)
                 return 0;
 
-        class_device_destroy(icap_class, drvdata->devt);
+        device_destroy(icap_class, drvdata->devt);
         cdev_del(&drvdata->cdev);
         iounmap(drvdata->base_address);
         release_mem_region(drvdata->mem_start, drvdata->mem_size);
         kfree(drvdata);
         dev_set_drvdata(dev, NULL);
-        probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
 
+        mutex_lock(&icap_sem);
+        probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+        mutex_unlock(&icap_sem);
         return 0;               /* success */
 }
 
@@ -821,28 +806,29 @@ static struct of_platform_driver hwicap_of_driver = {
 };
 
 /* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __devinit hwicap_of_register(void)
+static inline int __init hwicap_of_register(void)
 {
         pr_debug("hwicap: calling of_register_platform_driver()\n");
         return of_register_platform_driver(&hwicap_of_driver);
 }
 
-static inline void __devexit hwicap_of_unregister(void)
+static inline void __exit hwicap_of_unregister(void)
 {
         of_unregister_platform_driver(&hwicap_of_driver);
 }
 #else /* CONFIG_OF */
 /* CONFIG_OF not enabled; do nothing helpers */
-static inline int __devinit hwicap_of_register(void) { return 0; }
-static inline void __devexit hwicap_of_unregister(void) { }
+static inline int __init hwicap_of_register(void) { return 0; }
+static inline void __exit hwicap_of_unregister(void) { }
 #endif /* CONFIG_OF */
 
-static int __devinit hwicap_module_init(void)
+static int __init hwicap_module_init(void)
 {
         dev_t devt;
         int retval;
 
         icap_class = class_create(THIS_MODULE, "xilinx_config");
+        mutex_init(&icap_sem);
 
         if (xhwicap_major) {
                 devt = MKDEV(xhwicap_major, xhwicap_minor);
@@ -883,7 +869,7 @@ static int __devinit hwicap_module_init(void)
         return retval;
 }
 
-static void __devexit hwicap_module_cleanup(void)
+static void __exit hwicap_module_cleanup(void)
 {
         dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
 
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index ae771cac1629..405fee7e189b 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -48,9 +48,9 @@ struct hwicap_drvdata {
         u8 write_buffer[4];
         u32 read_buffer_in_use;   /* Always in [0,3] */
         u8 read_buffer[4];
-        u32 mem_start;            /* phys. address of the control registers */
-        u32 mem_end;              /* phys. address of the control registers */
-        u32 mem_size;
+        resource_size_t mem_start;/* phys. address of the control registers */
+        resource_size_t mem_end;  /* phys. address of the control registers */
+        resource_size_t mem_size;
         void __iomem *base_address;/* virt. address of the control registers */
 
         struct device *dev;
@@ -61,7 +61,7 @@ struct hwicap_drvdata {
         const struct config_registers *config_regs;
         void *private_data;
         bool is_open;
-        struct semaphore sem;
+        struct mutex sem;
 };
 
 struct hwicap_driver_config {
@@ -164,29 +164,29 @@ struct config_registers {
 #define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
 
 /**
- * hwicap_type_1_read: Generates a Type 1 read packet header.
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_read - Generates a Type 1 read packet header.
+ * @reg: is the address of the register to be read back.
  *
  * Generates a Type 1 read packet header, which is used to indirectly
  * read registers in the configuration logic.  This packet must then
  * be sent through the icap device, and a return packet received with
  * the information.
  **/
-static inline u32 hwicap_type_1_read(u32 Register)
+static inline u32 hwicap_type_1_read(u32 reg)
 {
         return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-                (Register << XHI_REGISTER_SHIFT) |
+                (reg << XHI_REGISTER_SHIFT) |
                 (XHI_OP_READ << XHI_OP_SHIFT);
 }
 
 /**
- * hwicap_type_1_write: Generates a Type 1 write packet header
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_write - Generates a Type 1 write packet header
+ * @reg: is the address of the register to be read back.
  **/
-static inline u32 hwicap_type_1_write(u32 Register)
+static inline u32 hwicap_type_1_write(u32 reg)
 {
         return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-                (Register << XHI_REGISTER_SHIFT) |
+                (reg << XHI_REGISTER_SHIFT) |
                 (XHI_OP_WRITE << XHI_OP_SHIFT);
 }
 
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index fea2d3ed9cbd..85e2ba7fcfba 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -47,7 +47,7 @@ static LIST_HEAD(notify_list);
 
 static struct cn_dev cdev;
 
-int cn_already_initialized = 0;
+static int cn_already_initialized;
 
 /*
  * msg->seq and msg->ack are used to determine message genealogy.
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 3e9719948a8e..a03462750b95 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/crc-itu-t.h>
@@ -214,17 +215,29 @@ static void
 fw_card_bm_work(struct work_struct *work)
 {
         struct fw_card *card = container_of(work, struct fw_card, work.work);
-        struct fw_device *root;
+        struct fw_device *root_device;
+        struct fw_node *root_node, *local_node;
         struct bm_data bmd;
         unsigned long flags;
         int root_id, new_root_id, irm_id, gap_count, generation, grace;
         int do_reset = 0;
 
         spin_lock_irqsave(&card->lock, flags);
+        local_node = card->local_node;
+        root_node  = card->root_node;
+
+        if (local_node == NULL) {
+                spin_unlock_irqrestore(&card->lock, flags);
+                return;
+        }
+        fw_node_get(local_node);
+        fw_node_get(root_node);
 
         generation = card->generation;
-        root = card->root_node->data;
-        root_id = card->root_node->node_id;
+        root_device = root_node->data;
+        if (root_device)
+                fw_device_get(root_device);
+        root_id = root_node->node_id;
         grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
 
         if (card->bm_generation + 1 == generation ||
@@ -243,14 +256,14 @@ fw_card_bm_work(struct work_struct *work)
 
                 irm_id = card->irm_node->node_id;
                 if (!card->irm_node->link_on) {
-                        new_root_id = card->local_node->node_id;
+                        new_root_id = local_node->node_id;
                         fw_notify("IRM has link off, making local node (%02x) root.\n",
                                   new_root_id);
                         goto pick_me;
                 }
 
                 bmd.lock.arg = cpu_to_be32(0x3f);
-                bmd.lock.data = cpu_to_be32(card->local_node->node_id);
+                bmd.lock.data = cpu_to_be32(local_node->node_id);
 
                 spin_unlock_irqrestore(&card->lock, flags);
 
@@ -267,12 +280,12 @@ fw_card_bm_work(struct work_struct *work)
                          * Another bus reset happened. Just return,
                          * the BM work has been rescheduled.
                          */
-                        return;
+                        goto out;
                 }
 
                 if (bmd.rcode == RCODE_COMPLETE && bmd.old != 0x3f)
                         /* Somebody else is BM, let them do the work. */
-                        return;
+                        goto out;
 
                 spin_lock_irqsave(&card->lock, flags);
                 if (bmd.rcode != RCODE_COMPLETE) {
@@ -282,7 +295,7 @@ fw_card_bm_work(struct work_struct *work)
                          * do a bus reset and pick the local node as
                          * root, and thus, IRM.
                          */
-                        new_root_id = card->local_node->node_id;
+                        new_root_id = local_node->node_id;
                         fw_notify("BM lock failed, making local node (%02x) root.\n",
                                   new_root_id);
                         goto pick_me;
@@ -295,7 +308,7 @@ fw_card_bm_work(struct work_struct *work)
                  */
                 spin_unlock_irqrestore(&card->lock, flags);
                 schedule_delayed_work(&card->work, DIV_ROUND_UP(HZ, 10));
-                return;
+                goto out;
         }
 
         /*
@@ -305,20 +318,20 @@ fw_card_bm_work(struct work_struct *work)
          */
         card->bm_generation = generation;
 
-        if (root == NULL) {
+        if (root_device == NULL) {
                 /*
                  * Either link_on is false, or we failed to read the
                  * config rom.  In either case, pick another root.
                  */
-                new_root_id = card->local_node->node_id;
-        } else if (atomic_read(&root->state) != FW_DEVICE_RUNNING) {
+                new_root_id = local_node->node_id;
+        } else if (atomic_read(&root_device->state) != FW_DEVICE_RUNNING) {
                 /*
                  * If we haven't probed this device yet, bail out now
                  * and let's try again once that's done.
                  */
                 spin_unlock_irqrestore(&card->lock, flags);
-                return;
-        } else if (root->config_rom[2] & BIB_CMC) {
+                goto out;
+        } else if (root_device->config_rom[2] & BIB_CMC) {
                 /*
                  * FIXME: I suppose we should set the cmstr bit in the
                  * STATE_CLEAR register of this node, as described in
@@ -332,7 +345,7 @@ fw_card_bm_work(struct work_struct *work)
                  * successfully read the config rom, but it's not
                  * cycle master capable.
                  */
-                new_root_id = card->local_node->node_id;
+                new_root_id = local_node->node_id;
         }
 
  pick_me:
@@ -341,8 +354,8 @@ fw_card_bm_work(struct work_struct *work)
          * the typically much larger 1394b beta repeater delays though.
          */
         if (!card->beta_repeaters_present &&
-            card->root_node->max_hops < ARRAY_SIZE(gap_count_table))
-                gap_count = gap_count_table[card->root_node->max_hops];
+            root_node->max_hops < ARRAY_SIZE(gap_count_table))
+                gap_count = gap_count_table[root_node->max_hops];
         else
                 gap_count = 63;
 
@@ -364,6 +377,11 @@ fw_card_bm_work(struct work_struct *work)
                 fw_send_phy_config(card, new_root_id, generation, gap_count);
                 fw_core_initiate_bus_reset(card, 1);
         }
+ out:
+        if (root_device)
+                fw_device_put(root_device);
+        fw_node_put(root_node);
+        fw_node_put(local_node);
 }
 
 static void
@@ -381,6 +399,7 @@ fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver,
         static atomic_t index = ATOMIC_INIT(-1);
 
         kref_init(&card->kref);
+        atomic_set(&card->device_count, 0);
         card->index = atomic_inc_return(&index);
         card->driver = driver;
         card->device = device;
@@ -511,8 +530,14 @@ fw_core_remove_card(struct fw_card *card)
         card->driver = &dummy_driver;
 
         fw_destroy_nodes(card);
-        flush_scheduled_work();
+        /*
+         * Wait for all device workqueue jobs to finish.  Otherwise the
+         * firewire-core module could be unloaded before the jobs ran.
+         */
+        while (atomic_read(&card->device_count) > 0)
+                msleep(100);
 
+        cancel_delayed_work_sync(&card->work);
         fw_flush_transactions(card);
         del_timer_sync(&card->flush_timer);
 
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index 7e73cbaa4121..46bc197a047f 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -109,15 +109,17 @@ static int fw_device_op_open(struct inode *inode, struct file *file)
         struct client *client;
         unsigned long flags;
 
-        device = fw_device_from_devt(inode->i_rdev);
+        device = fw_device_get_by_devt(inode->i_rdev);
         if (device == NULL)
                 return -ENODEV;
 
         client = kzalloc(sizeof(*client), GFP_KERNEL);
-        if (client == NULL)
+        if (client == NULL) {
+                fw_device_put(device);
                 return -ENOMEM;
+        }
 
-        client->device = fw_device_get(device);
+        client->device = device;
         INIT_LIST_HEAD(&client->event_list);
         INIT_LIST_HEAD(&client->resource_list);
         spin_lock_init(&client->lock);
@@ -644,6 +646,10 @@ static int ioctl_create_iso_context(struct client *client, void *buffer)
         struct fw_cdev_create_iso_context *request = buffer;
         struct fw_iso_context *context;
 
+        /* We only support one context at this time. */
+        if (client->iso_context != NULL)
+                return -EBUSY;
+
         if (request->channel > 63)
                 return -EINVAL;
 
@@ -790,8 +796,9 @@ static int ioctl_start_iso(struct client *client, void *buffer)
 {
         struct fw_cdev_start_iso *request = buffer;
 
-        if (request->handle != 0)
+        if (client->iso_context == NULL || request->handle != 0)
                 return -EINVAL;
+
         if (client->iso_context->type == FW_ISO_CONTEXT_RECEIVE) {
                 if (request->tags == 0 || request->tags > 15)
                         return -EINVAL;
@@ -808,7 +815,7 @@ static int ioctl_stop_iso(struct client *client, void *buffer)
 {
         struct fw_cdev_stop_iso *request = buffer;
 
-        if (request->handle != 0)
+        if (client->iso_context == NULL || request->handle != 0)
                 return -EINVAL;
 
         return fw_iso_context_stop(client->iso_context);
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index de9066e69adf..870125a3638e 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -150,21 +150,10 @@ struct bus_type fw_bus_type = {
 };
 EXPORT_SYMBOL(fw_bus_type);
 
-struct fw_device *fw_device_get(struct fw_device *device)
-{
-        get_device(&device->device);
-
-        return device;
-}
-
-void fw_device_put(struct fw_device *device)
-{
-        put_device(&device->device);
-}
-
 static void fw_device_release(struct device *dev)
 {
         struct fw_device *device = fw_device(dev);
+        struct fw_card *card = device->card;
         unsigned long flags;
 
         /*
@@ -176,9 +165,9 @@ static void fw_device_release(struct device *dev)
         spin_unlock_irqrestore(&device->card->lock, flags);
 
         fw_node_put(device->node);
-        fw_card_put(device->card);
         kfree(device->config_rom);
         kfree(device);
+        atomic_dec(&card->device_count);
 }
 
 int fw_device_enable_phys_dma(struct fw_device *device)
@@ -358,12 +347,9 @@ static ssize_t
 guid_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct fw_device *device = fw_device(dev);
-        u64 guid;
-
-        guid = ((u64)device->config_rom[3] << 32) | device->config_rom[4];
 
-        return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
-                        (unsigned long long)guid);
+        return snprintf(buf, PAGE_SIZE, "0x%08x%08x\n",
+                        device->config_rom[3], device->config_rom[4]);
 }
 
 static struct device_attribute fw_device_attributes[] = {
@@ -610,12 +596,14 @@ static DECLARE_RWSEM(idr_rwsem);
 static DEFINE_IDR(fw_device_idr);
 int fw_cdev_major;
 
-struct fw_device *fw_device_from_devt(dev_t devt)
+struct fw_device *fw_device_get_by_devt(dev_t devt)
 {
         struct fw_device *device;
 
         down_read(&idr_rwsem);
         device = idr_find(&fw_device_idr, MINOR(devt));
+        if (device)
+                fw_device_get(device);
         up_read(&idr_rwsem);
 
         return device;
@@ -627,13 +615,14 @@ static void fw_device_shutdown(struct work_struct *work)
                 container_of(work, struct fw_device, work.work);
         int minor = MINOR(device->device.devt);
 
-        down_write(&idr_rwsem);
-        idr_remove(&fw_device_idr, minor);
-        up_write(&idr_rwsem);
-
         fw_device_cdev_remove(device);
         device_for_each_child(&device->device, NULL, shutdown_unit);
         device_unregister(&device->device);
+
+        down_write(&idr_rwsem);
+        idr_remove(&fw_device_idr, minor);
+        up_write(&idr_rwsem);
+        fw_device_put(device);
 }
 
 static struct device_type fw_device_type = {
@@ -668,7 +657,8 @@ static void fw_device_init(struct work_struct *work)
          */
 
         if (read_bus_info_block(device, device->generation) < 0) {
-                if (device->config_rom_retries < MAX_RETRIES) {
+                if (device->config_rom_retries < MAX_RETRIES &&
+                    atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
                         device->config_rom_retries++;
                         schedule_delayed_work(&device->work, RETRY_DELAY);
                 } else {
@@ -682,10 +672,13 @@ static void fw_device_init(struct work_struct *work)
         }
 
         err = -ENOMEM;
+
+        fw_device_get(device);
         down_write(&idr_rwsem);
         if (idr_pre_get(&fw_device_idr, GFP_KERNEL))
                 err = idr_get_new(&fw_device_idr, device, &minor);
         up_write(&idr_rwsem);
+
         if (err < 0)
                 goto error;
 
@@ -717,13 +710,22 @@ static void fw_device_init(struct work_struct *work)
          */
         if (atomic_cmpxchg(&device->state,
                     FW_DEVICE_INITIALIZING,
-                    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+                    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
                 fw_device_shutdown(&device->work.work);
-        else
-                fw_notify("created new fw device %s "
-                          "(%d config rom retries, S%d00)\n",
-                          device->device.bus_id, device->config_rom_retries,
-                          1 << device->max_speed);
+        } else {
+                if (device->config_rom_retries)
+                        fw_notify("created device %s: GUID %08x%08x, S%d00, "
+                                  "%d config ROM retries\n",
+                                  device->device.bus_id,
+                                  device->config_rom[3], device->config_rom[4],
+                                  1 << device->max_speed,
+                                  device->config_rom_retries);
+                else
+                        fw_notify("created device %s: GUID %08x%08x, S%d00\n",
+                                  device->device.bus_id,
+                                  device->config_rom[3], device->config_rom[4],
+                                  1 << device->max_speed);
+        }
 
         /*
          * Reschedule the IRM work if we just finished reading the
@@ -741,7 +743,9 @@ static void fw_device_init(struct work_struct *work)
         idr_remove(&fw_device_idr, minor);
         up_write(&idr_rwsem);
  error:
-        put_device(&device->device);
+        fw_device_put(device);          /* fw_device_idr's reference */
+
+        put_device(&device->device);    /* our reference */
 }
 
 static int update_unit(struct device *dev, void *data)
@@ -791,7 +795,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
                  */
                 device_initialize(&device->device);
                 atomic_set(&device->state, FW_DEVICE_INITIALIZING);
-                device->card = fw_card_get(card);
+                atomic_inc(&card->device_count);
+                device->card = card;
                 device->node = fw_node_get(node);
                 device->node_id = node->node_id;
                 device->generation = card->generation;
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index 0854fe2bc110..78ecd3991b7f 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -76,14 +76,26 @@ fw_device_is_shutdown(struct fw_device *device)
         return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
 }
 
-struct fw_device *fw_device_get(struct fw_device *device);
-void fw_device_put(struct fw_device *device);
+static inline struct fw_device *
+fw_device_get(struct fw_device *device)
+{
+        get_device(&device->device);
+
+        return device;
+}
+
+static inline void
+fw_device_put(struct fw_device *device)
+{
+        put_device(&device->device);
+}
+
+struct fw_device *fw_device_get_by_devt(dev_t devt);
 int fw_device_enable_phys_dma(struct fw_device *device);
 
 void fw_device_cdev_update(struct fw_device *device);
 void fw_device_cdev_remove(struct fw_device *device);
 
-struct fw_device *fw_device_from_devt(dev_t devt);
 extern int fw_cdev_major;
 
 struct fw_unit {
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 19ece9b6d742..03069a454c07 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -28,14 +28,15 @@
  * and many others.
  */
 
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/mod_devicetable.h>
-#include <linux/device.h>
 #include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/blkdev.h>
 #include <linux/string.h>
 #include <linux/stringify.h>
 #include <linux/timer.h>
@@ -47,9 +48,9 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 
-#include "fw-transaction.h"
-#include "fw-topology.h"
 #include "fw-device.h"
+#include "fw-topology.h"
+#include "fw-transaction.h"
 
 /*
  * So far only bridges from Oxford Semiconductor are known to support
@@ -82,6 +83,9 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
  *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
  *   Don't use this with devices which don't have this bug.
  *
+ * - delay inquiry
+ *   Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
+ *
  * - override internal blacklist
  *   Instead of adding to the built-in blacklist, use only the workarounds
  *   specified in the module load parameter.
@@ -91,6 +95,8 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
 #define SBP2_WORKAROUND_INQUIRY_36      0x2
 #define SBP2_WORKAROUND_MODE_SENSE_8    0x4
 #define SBP2_WORKAROUND_FIX_CAPACITY    0x8
+#define SBP2_WORKAROUND_DELAY_INQUIRY   0x10
+#define SBP2_INQUIRY_DELAY              12
 #define SBP2_WORKAROUND_OVERRIDE        0x100
 
 static int sbp2_param_workarounds;
@@ -100,6 +106,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
         ", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
         ", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
         ", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+        ", delay inquiry = "      __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
         ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
         ", or a combination)");
 
@@ -115,7 +122,6 @@ static const char sbp2_driver_name[] = "sbp2";
 struct sbp2_logical_unit {
         struct sbp2_target *tgt;
         struct list_head link;
-        struct scsi_device *sdev;
         struct fw_address_handler address_handler;
         struct list_head orb_list;
 
@@ -132,6 +138,8 @@ struct sbp2_logical_unit {
         int generation;
         int retries;
         struct delayed_work work;
+        bool has_sdev;
+        bool blocked;
 };
 
 /*
@@ -141,16 +149,18 @@ struct sbp2_logical_unit {
 struct sbp2_target {
         struct kref kref;
         struct fw_unit *unit;
+        const char *bus_id;
+        struct list_head lu_list;
 
         u64 management_agent_address;
         int directory_id;
         int node_id;
         int address_high;
-
-        unsigned workarounds;
-        struct list_head lu_list;
-
+        unsigned int workarounds;
         unsigned int mgt_orb_timeout;
+
+        int dont_block; /* counter for each logical unit */
+        int blocked;    /* ditto */
 };
 
 /*
@@ -160,7 +170,7 @@ struct sbp2_target {
  */
 #define SBP2_MIN_LOGIN_ORB_TIMEOUT      5000U   /* Timeout in ms */
 #define SBP2_MAX_LOGIN_ORB_TIMEOUT      40000U  /* Timeout in ms */
-#define SBP2_ORB_TIMEOUT                2000    /* Timeout in ms */
+#define SBP2_ORB_TIMEOUT                2000U   /* Timeout in ms */
 #define SBP2_ORB_NULL                   0x80000000
 #define SBP2_MAX_SG_ELEMENT_LENGTH      0xf000
 
@@ -297,7 +307,7 @@ struct sbp2_command_orb {
 static const struct {
         u32 firmware_revision;
         u32 model;
-        unsigned workarounds;
+        unsigned int workarounds;
 } sbp2_workarounds_table[] = {
         /* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
                 .firmware_revision      = 0x002800,
@@ -305,6 +315,11 @@ static const struct {
                 .workarounds            = SBP2_WORKAROUND_INQUIRY_36 |
                                           SBP2_WORKAROUND_MODE_SENSE_8,
         },
+        /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+                .firmware_revision      = 0x002800,
+                .model                  = 0x000000,
+                .workarounds            = SBP2_WORKAROUND_DELAY_INQUIRY,
+        },
         /* Initio bridges, actually only needed for some older ones */ {
                 .firmware_revision      = 0x000200,
                 .model                  = ~0,
@@ -501,6 +516,9 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
         unsigned int timeout;
         int retval = -ENOMEM;
 
+        if (function == SBP2_LOGOUT_REQUEST && fw_device_is_shutdown(device))
+                return 0;
+
         orb = kzalloc(sizeof(*orb), GFP_ATOMIC);
         if (orb == NULL)
                 return -ENOMEM;
@@ -553,20 +571,20 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 
         retval = -EIO;
         if (sbp2_cancel_orbs(lu) == 0) {
-                fw_error("orb reply timed out, rcode=0x%02x\n",
-                         orb->base.rcode);
+                fw_error("%s: orb reply timed out, rcode=0x%02x\n",
+                         lu->tgt->bus_id, orb->base.rcode);
                 goto out;
         }
 
         if (orb->base.rcode != RCODE_COMPLETE) {
-                fw_error("management write failed, rcode 0x%02x\n",
-                         orb->base.rcode);
+                fw_error("%s: management write failed, rcode 0x%02x\n",
+                         lu->tgt->bus_id, orb->base.rcode);
                 goto out;
         }
 
         if (STATUS_GET_RESPONSE(orb->status) != 0 ||
             STATUS_GET_SBP_STATUS(orb->status) != 0) {
-                fw_error("error status: %d:%d\n",
+                fw_error("%s: error status: %d:%d\n", lu->tgt->bus_id,
                          STATUS_GET_RESPONSE(orb->status),
                          STATUS_GET_SBP_STATUS(orb->status));
                 goto out;
@@ -590,29 +608,158 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 
 static void
 complete_agent_reset_write(struct fw_card *card, int rcode,
-                           void *payload, size_t length, void *data)
+                           void *payload, size_t length, void *done)
 {
-        struct fw_transaction *t = data;
+        complete(done);
+}
 
-        kfree(t);
+static void sbp2_agent_reset(struct sbp2_logical_unit *lu)
+{
+        struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+        DECLARE_COMPLETION_ONSTACK(done);
+        struct fw_transaction t;
+        static u32 z;
+
+        fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
+                        lu->tgt->node_id, lu->generation, device->max_speed,
+                        lu->command_block_agent_address + SBP2_AGENT_RESET,
+                        &z, sizeof(z), complete_agent_reset_write, &done);
+        wait_for_completion(&done);
+}
+
+static void
+complete_agent_reset_write_no_wait(struct fw_card *card, int rcode,
+                                   void *payload, size_t length, void *data)
+{
+        kfree(data);
 }
 
-static int sbp2_agent_reset(struct sbp2_logical_unit *lu)
+static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu)
 {
         struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
         struct fw_transaction *t;
-        static u32 zero;
+        static u32 z;
 
-        t = kzalloc(sizeof(*t), GFP_ATOMIC);
+        t = kmalloc(sizeof(*t), GFP_ATOMIC);
         if (t == NULL)
-                return -ENOMEM;
+                return;
 
         fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
                         lu->tgt->node_id, lu->generation, device->max_speed,
                         lu->command_block_agent_address + SBP2_AGENT_RESET,
-                        &zero, sizeof(zero), complete_agent_reset_write, t);
+                        &z, sizeof(z), complete_agent_reset_write_no_wait, t);
+}
 
-        return 0;
+static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation)
+{
+        struct fw_card *card = fw_device(lu->tgt->unit->device.parent)->card;
+        unsigned long flags;
+
+        /* serialize with comparisons of lu->generation and card->generation */
+        spin_lock_irqsave(&card->lock, flags);
+        lu->generation = generation;
+        spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static inline void sbp2_allow_block(struct sbp2_logical_unit *lu)
+{
+        /*
+         * We may access dont_block without taking card->lock here:
+         * All callers of sbp2_allow_block() and all callers of sbp2_unblock()
+         * are currently serialized against each other.
+         * And a wrong result in sbp2_conditionally_block()'s access of
+         * dont_block is rather harmless, it simply misses its first chance.
+         */
+        --lu->tgt->dont_block;
+}
+
+/*
+ * Blocks lu->tgt if all of the following conditions are met:
+ *   - Login, INQUIRY, and high-level SCSI setup of all of the target's
+ *     logical units have been finished (indicated by dont_block == 0).
+ *   - lu->generation is stale.
+ *
+ * Note, scsi_block_requests() must be called while holding card->lock,
+ * otherwise it might foil sbp2_[conditionally_]unblock()'s attempt to
+ * unblock the target.
+ */
+static void sbp2_conditionally_block(struct sbp2_logical_unit *lu)
+{
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+        struct Scsi_Host *shost =
+                container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        unsigned long flags;
+
+        spin_lock_irqsave(&card->lock, flags);
+        if (!tgt->dont_block && !lu->blocked &&
+            lu->generation != card->generation) {
+                lu->blocked = true;
+                if (++tgt->blocked == 1) {
+                        scsi_block_requests(shost);
+                        fw_notify("blocked %s\n", lu->tgt->bus_id);
+                }
+        }
+        spin_unlock_irqrestore(&card->lock, flags);
+}
+
+/*
+ * Unblocks lu->tgt as soon as all its logical units can be unblocked.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section.  On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu)
+{
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+        struct Scsi_Host *shost =
+                container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        unsigned long flags;
+        bool unblock = false;
+
+        spin_lock_irqsave(&card->lock, flags);
+        if (lu->blocked && lu->generation == card->generation) {
+                lu->blocked = false;
+                unblock = --tgt->blocked == 0;
+        }
+        spin_unlock_irqrestore(&card->lock, flags);
+
+        if (unblock) {
+                scsi_unblock_requests(shost);
+                fw_notify("unblocked %s\n", lu->tgt->bus_id);
+        }
+}
+
+/*
+ * Prevents future blocking of tgt and unblocks it.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section.  On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_unblock(struct sbp2_target *tgt)
+{
+        struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+        struct Scsi_Host *shost =
+                container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        unsigned long flags;
+
+        spin_lock_irqsave(&card->lock, flags);
+        ++tgt->dont_block;
+        spin_unlock_irqrestore(&card->lock, flags);
+
+        scsi_unblock_requests(shost);
+}
+
+static int sbp2_lun2int(u16 lun)
+{
+        struct scsi_lun eight_bytes_lun;
+
+        memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun));
+        eight_bytes_lun.scsi_lun[0] = (lun >> 8) & 0xff;
+        eight_bytes_lun.scsi_lun[1] = lun & 0xff;
+
+        return scsilun_to_int(&eight_bytes_lun);
 }
 
 static void sbp2_release_target(struct kref *kref)
@@ -621,26 +768,31 @@ static void sbp2_release_target(struct kref *kref)
         struct sbp2_logical_unit *lu, *next;
         struct Scsi_Host *shost =
                 container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        struct scsi_device *sdev;
         struct fw_device *device = fw_device(tgt->unit->device.parent);
 
-        list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
-                if (lu->sdev)
-                        scsi_remove_device(lu->sdev);
+        /* prevent deadlocks */
+        sbp2_unblock(tgt);
 
-                if (!fw_device_is_shutdown(device))
-                        sbp2_send_management_orb(lu, tgt->node_id,
-                                        lu->generation, SBP2_LOGOUT_REQUEST,
-                                        lu->login_id, NULL);
+        list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
+                sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun));
+                if (sdev) {
+                        scsi_remove_device(sdev);
+                        scsi_device_put(sdev);
+                }
+                sbp2_send_management_orb(lu, tgt->node_id, lu->generation,
+                                SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
 
                 fw_core_remove_address_handler(&lu->address_handler);
                 list_del(&lu->link);
                 kfree(lu);
         }
         scsi_remove_host(shost);
-        fw_notify("released %s\n", tgt->unit->device.bus_id);
+        fw_notify("released %s\n", tgt->bus_id);
 
         put_device(&tgt->unit->device);
         scsi_host_put(shost);
+        fw_device_put(device);
 }
 
 static struct workqueue_struct *sbp2_wq;
@@ -666,33 +818,42 @@ static void sbp2_login(struct work_struct *work)
 {
         struct sbp2_logical_unit *lu =
                 container_of(work, struct sbp2_logical_unit, work.work);
-        struct Scsi_Host *shost =
-                container_of((void *)lu->tgt, struct Scsi_Host, hostdata[0]);
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_device *device = fw_device(tgt->unit->device.parent);
+        struct Scsi_Host *shost;
         struct scsi_device *sdev;
-        struct scsi_lun eight_bytes_lun;
-        struct fw_unit *unit = lu->tgt->unit;
-        struct fw_device *device = fw_device(unit->device.parent);
         struct sbp2_login_response response;
         int generation, node_id, local_node_id;
 
+        if (fw_device_is_shutdown(device))
+                goto out;
+
         generation    = device->generation;
         smp_rmb();    /* node_id must not be older than generation */
         node_id       = device->node_id;
         local_node_id = device->card->node_id;
 
+        /* If this is a re-login attempt, log out, or we might be rejected. */
+        if (lu->has_sdev)
+                sbp2_send_management_orb(lu, device->node_id, generation,
+                                SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
+
         if (sbp2_send_management_orb(lu, node_id, generation,
                                 SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) {
-                if (lu->retries++ < 5)
+                if (lu->retries++ < 5) {
                         sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
-                else
-                        fw_error("failed to login to %s LUN %04x\n",
-                                 unit->device.bus_id, lu->lun);
+                } else {
+                        fw_error("%s: failed to login to LUN %04x\n",
+                                 tgt->bus_id, lu->lun);
+                        /* Let any waiting I/O fail from now on. */
+                        sbp2_unblock(lu->tgt);
+                }
                 goto out;
         }
 
-        lu->generation        = generation;
-        lu->tgt->node_id      = node_id;
-        lu->tgt->address_high = local_node_id << 16;
+        tgt->node_id      = node_id;
+        tgt->address_high = local_node_id << 16;
+        sbp2_set_generation(lu, generation);
 
         /* Get command block agent offset and login id. */
         lu->command_block_agent_address =
@@ -700,8 +861,8 @@ static void sbp2_login(struct work_struct *work)
                 response.command_block_agent.low;
         lu->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response);
 
-        fw_notify("logged in to %s LUN %04x (%d retries)\n",
-                  unit->device.bus_id, lu->lun, lu->retries);
+        fw_notify("%s: logged in to LUN %04x (%d retries)\n",
+                  tgt->bus_id, lu->lun, lu->retries);
 
 #if 0
         /* FIXME: The linux1394 sbp2 does this last step. */
@@ -711,26 +872,58 @@ static void sbp2_login(struct work_struct *work)
         PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
         sbp2_agent_reset(lu);
 
-        memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun));
-        eight_bytes_lun.scsi_lun[0] = (lu->lun >> 8) & 0xff;
-        eight_bytes_lun.scsi_lun[1] = lu->lun & 0xff;
+        /* This was a re-login. */
+        if (lu->has_sdev) {
+                sbp2_cancel_orbs(lu);
+                sbp2_conditionally_unblock(lu);
+                goto out;
+        }
 
-        sdev = __scsi_add_device(shost, 0, 0,
-                                 scsilun_to_int(&eight_bytes_lun), lu);
-        if (IS_ERR(sdev)) {
-                sbp2_send_management_orb(lu, node_id, generation,
-                                SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
-                /*
-                 * Set this back to sbp2_login so we fall back and
-                 * retry login on bus reset.
-                 */
-                PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
-        } else {
-                lu->sdev = sdev;
+        if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
+                ssleep(SBP2_INQUIRY_DELAY);
+
+        shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+        sdev = __scsi_add_device(shost, 0, 0, sbp2_lun2int(lu->lun), lu);
+        /*
+         * FIXME:  We are unable to perform reconnects while in sbp2_login().
+         * Therefore __scsi_add_device() will get into trouble if a bus reset
+         * happens in parallel.  It will either fail or leave us with an
+         * unusable sdev.  As a workaround we check for this and retry the
+         * whole login and SCSI probing.
+         */
+
+        /* Reported error during __scsi_add_device() */
+        if (IS_ERR(sdev))
+                goto out_logout_login;
+
+        /* Unreported error during __scsi_add_device() */
+        smp_rmb(); /* get current card generation */
+        if (generation != device->card->generation) {
+                scsi_remove_device(sdev);
                 scsi_device_put(sdev);
+                goto out_logout_login;
         }
+
+        /* No error during __scsi_add_device() */
+        lu->has_sdev = true;
+        scsi_device_put(sdev);
+        sbp2_allow_block(lu);
+        goto out;
+
+ out_logout_login:
+        smp_rmb(); /* generation may have changed */
+        generation = device->generation;
+        smp_rmb(); /* node_id must not be older than generation */
+
+        sbp2_send_management_orb(lu, device->node_id, generation,
+                                 SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
+        /*
+         * If a bus reset happened, sbp2_update will have requeued
+         * lu->work already.  Reset the work from reconnect to login.
+         */
+        PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
  out:
-        sbp2_target_put(lu->tgt);
+        sbp2_target_put(tgt);
 }
 
 static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
@@ -751,10 +944,12 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
                 return -ENOMEM;
         }
 
-        lu->tgt  = tgt;
-        lu->sdev = NULL;
-        lu->lun  = lun_entry & 0xffff;
-        lu->retries = 0;
+        lu->tgt      = tgt;
+        lu->lun      = lun_entry & 0xffff;
+        lu->retries  = 0;
+        lu->has_sdev = false;
+        lu->blocked  = false;
+        ++tgt->dont_block;
         INIT_LIST_HEAD(&lu->orb_list);
         INIT_DELAYED_WORK(&lu->work, sbp2_login);
 
@@ -813,7 +1008,7 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory,
                         if (timeout > tgt->mgt_orb_timeout)
                                 fw_notify("%s: config rom contains %ds "
                                           "management ORB timeout, limiting "
-                                          "to %ds\n", tgt->unit->device.bus_id,
+                                          "to %ds\n", tgt->bus_id,
                                           timeout / 1000,
                                           tgt->mgt_orb_timeout / 1000);
                         break;
@@ -836,12 +1031,12 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
                                   u32 firmware_revision)
 {
         int i;
-        unsigned w = sbp2_param_workarounds;
+        unsigned int w = sbp2_param_workarounds;
 
         if (w)
                 fw_notify("Please notify linux1394-devel@lists.sourceforge.net "
                           "if you need the workarounds parameter for %s\n",
-                          tgt->unit->device.bus_id);
+                          tgt->bus_id);
 
         if (w & SBP2_WORKAROUND_OVERRIDE)
                 goto out;
@@ -863,8 +1058,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
         if (w)
                 fw_notify("Workarounds for %s: 0x%x "
                           "(firmware_revision 0x%06x, model_id 0x%06x)\n",
-                          tgt->unit->device.bus_id,
-                          w, firmware_revision, model);
+                          tgt->bus_id, w, firmware_revision, model);
         tgt->workarounds = w;
 }
 
@@ -888,6 +1082,7 @@ static int sbp2_probe(struct device *dev)
         tgt->unit = unit;
         kref_init(&tgt->kref);
         INIT_LIST_HEAD(&tgt->lu_list);
+        tgt->bus_id = unit->device.bus_id;
 
         if (fw_device_enable_phys_dma(device) < 0)
                 goto fail_shost_put;
@@ -895,6 +1090,8 @@ static int sbp2_probe(struct device *dev)
         if (scsi_add_host(shost, &unit->device) < 0)
                 goto fail_shost_put;
 
+        fw_device_get(device);
+
         /* Initialize to values that won't match anything in our table. */
         firmware_revision = 0xff000000;
         model = 0xff000000;
@@ -938,10 +1135,13 @@ static void sbp2_reconnect(struct work_struct *work)
 {
         struct sbp2_logical_unit *lu =
                 container_of(work, struct sbp2_logical_unit, work.work);
-        struct fw_unit *unit = lu->tgt->unit;
-        struct fw_device *device = fw_device(unit->device.parent);
+        struct sbp2_target *tgt = lu->tgt;
+        struct fw_device *device = fw_device(tgt->unit->device.parent);
         int generation, node_id, local_node_id;
 
+        if (fw_device_is_shutdown(device))
+                goto out;
+
         generation    = device->generation;
         smp_rmb();    /* node_id must not be older than generation */
         node_id       = device->node_id;
@@ -950,10 +1150,17 @@ static void sbp2_reconnect(struct work_struct *work)
         if (sbp2_send_management_orb(lu, node_id, generation,
                                      SBP2_RECONNECT_REQUEST,
                                      lu->login_id, NULL) < 0) {
-                if (lu->retries++ >= 5) {
-                        fw_error("failed to reconnect to %s\n",
-                                 unit->device.bus_id);
-                        /* Fall back and try to log in again. */
+                /*
+                 * If reconnect was impossible even though we are in the
+                 * current generation, fall back and try to log in again.
+                 *
+                 * We could check for "Function rejected" status, but
+                 * looking at the bus generation as simpler and more general.
+                 */
+                smp_rmb(); /* get current card generation */
+                if (generation == device->card->generation ||
+                    lu->retries++ >= 5) {
+                        fw_error("%s: failed to reconnect\n", tgt->bus_id);
                         lu->retries = 0;
                         PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
                 }
@@ -961,17 +1168,18 @@ static void sbp2_reconnect(struct work_struct *work)
                 goto out;
         }
 
-        lu->generation        = generation;
-        lu->tgt->node_id      = node_id;
-        lu->tgt->address_high = local_node_id << 16;
+        tgt->node_id      = node_id;
+        tgt->address_high = local_node_id << 16;
+        sbp2_set_generation(lu, generation);
 
-        fw_notify("reconnected to %s LUN %04x (%d retries)\n",
-                  unit->device.bus_id, lu->lun, lu->retries);
+        fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
+                  tgt->bus_id, lu->lun, lu->retries);
 
         sbp2_agent_reset(lu);
         sbp2_cancel_orbs(lu);
+        sbp2_conditionally_unblock(lu);
  out:
-        sbp2_target_put(lu->tgt);
+        sbp2_target_put(tgt);
 }
 
 static void sbp2_update(struct fw_unit *unit)
@@ -986,6 +1194,7 @@ static void sbp2_update(struct fw_unit *unit)
          * Iteration over tgt->lu_list is therefore safe here.
          */
         list_for_each_entry(lu, &tgt->lu_list, link) {
+                sbp2_conditionally_block(lu);
                 lu->retries = 0;
                 sbp2_queue_work(lu, 0);
         }
@@ -1063,7 +1272,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
 
         if (status != NULL) {
                 if (STATUS_GET_DEAD(*status))
-                        sbp2_agent_reset(orb->lu);
+                        sbp2_agent_reset_no_wait(orb->lu);
 
                 switch (STATUS_GET_RESPONSE(*status)) {
                 case SBP2_STATUS_REQUEST_COMPLETE:
@@ -1089,6 +1298,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
                  * or when sending the write (less likely).
                  */
                 result = DID_BUS_BUSY << 16;
+                sbp2_conditionally_block(orb->lu);
         }
 
         dma_unmap_single(device->card->device, orb->base.request_bus,
@@ -1197,7 +1407,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         struct sbp2_logical_unit *lu = cmd->device->hostdata;
         struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
         struct sbp2_command_orb *orb;
-        unsigned max_payload;
+        unsigned int max_payload;
         int retval = SCSI_MLQUEUE_HOST_BUSY;
 
         /*
@@ -1275,6 +1485,10 @@ static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
 {
         struct sbp2_logical_unit *lu = sdev->hostdata;
 
+        /* (Re-)Adding logical units via the SCSI stack is not supported. */
+        if (!lu)
+                return -ENOSYS;
+
         sdev->allow_restart = 1;
 
         /*
@@ -1319,7 +1533,7 @@ static int sbp2_scsi_abort(struct scsi_cmnd *cmd)
 {
         struct sbp2_logical_unit *lu = cmd->device->hostdata;
 
-        fw_notify("sbp2_scsi_abort\n");
+        fw_notify("%s: sbp2_scsi_abort\n", lu->tgt->bus_id);
         sbp2_agent_reset(lu);
         sbp2_cancel_orbs(lu);
 
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index 172c1867e9aa..e47bb040197a 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -383,6 +383,7 @@ void fw_destroy_nodes(struct fw_card *card)
         card->color++;
         if (card->local_node != NULL)
                 for_each_fw_node(card, card->local_node, report_lost_node);
+        card->local_node = NULL;
         spin_unlock_irqrestore(&card->lock, flags);
 }
 
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index fa7967b57408..09cb72870454 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -26,6 +26,7 @@
 #include <linux/fs.h>
 #include <linux/dma-mapping.h>
 #include <linux/firewire-constants.h>
+#include <asm/atomic.h>
 
 #define TCODE_IS_READ_REQUEST(tcode)    (((tcode) & ~1) == 4)
 #define TCODE_IS_BLOCK_PACKET(tcode)    (((tcode) &  1) != 0)
@@ -219,6 +220,7 @@ extern struct bus_type fw_bus_type;
 struct fw_card {
         const struct fw_card_driver *driver;
         struct device *device;
+        atomic_t device_count;
         struct kref kref;
 
         int node_id;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b61f56b6f311..476b0bb72d6c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -177,6 +177,8 @@ config I2C_I801
             ESB2
             ICH8
             ICH9
+            Tolapai
+            ICH10
 
           This driver can also be built as a module.  If so, the module
           will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index aa9157913b9a..b0f771fe4326 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -40,7 +40,9 @@
   82801G   (ICH7)       0x27da     32     hard     yes     yes     yes
   82801H   (ICH8)       0x283e     32     hard     yes     yes     yes
   82801I   (ICH9)       0x2930     32     hard     yes     yes     yes
-  Tolapai               0x5032     32     hard     yes     ?       ?
+  Tolapai               0x5032     32     hard     yes     yes     yes
+  ICH10                 0x3a30     32     hard     yes     yes     yes
+  ICH10                 0x3a60     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -588,6 +590,8 @@ static struct pci_device_id i801_ids[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
         { 0, }
 };
 
@@ -608,10 +612,12 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
         case PCI_DEVICE_ID_INTEL_ESB2_17:
         case PCI_DEVICE_ID_INTEL_ICH8_5:
         case PCI_DEVICE_ID_INTEL_ICH9_6:
+        case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
+        case PCI_DEVICE_ID_INTEL_ICH10_4:
+        case PCI_DEVICE_ID_INTEL_ICH10_5:
                 i801_features |= FEATURE_I2C_BLOCK_READ;
                 /* fall through */
         case PCI_DEVICE_ID_INTEL_82801DB_3:
-        case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
                 i801_features |= FEATURE_SMBUS_PEC;
                 i801_features |= FEATURE_BLOCK_BUFFER;
                 break;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 5161aaf9341b..496ee875eb4f 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -125,6 +125,13 @@ static int __devinit pca_isa_probe(struct device *dev, unsigned int id)
 
         dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
 
+#ifdef CONFIG_PPC_MERGE
+        if (check_legacy_ioport(base)) {
+                dev_err(dev, "I/O address %#08lx is not available\n", base);
+                goto out;
+        }
+#endif
+
         if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
                 dev_err(dev, "I/O address %#08lx is in use\n", base);
                 goto out;
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index be99c02ecac5..b03af5653c65 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -122,7 +122,7 @@ struct pmcmsptwi_data {
 };
 
 /* The default settings */
-const static struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
+static const struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
         .standard = {
                 .filter = 0x3,
                 .clock  = 0x1f,
@@ -133,7 +133,7 @@ const static struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
         },
 };
 
-const static struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
+static const struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
         .arbf           = 0x03,
         .nak            = 0x03,
         .add10          = 0x00,
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 2b557bfd7f70..2d2087ad708f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -999,7 +999,14 @@ static int i2c_pxa_probe(struct platform_device *dev)
         spin_lock_init(&i2c->lock);
         init_waitqueue_head(&i2c->wait);
 
-        sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
+        /*
+         * If "dev->id" is negative we consider it as zero.
+         * The reason to do so is to avoid sysfs names that only make
+         * sense when there are multiple adapters.
+         */
+        i2c->adap.nr = dev->id != -1 ? dev->id : 0;
+        snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
+                 i2c->adap.nr);
 
         i2c->clk = clk_get(&dev->dev, "I2CCLK");
         if (IS_ERR(i2c->clk)) {
@@ -1050,13 +1057,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
         i2c->adap.algo_data = i2c;
         i2c->adap.dev.parent = &dev->dev;
 
-        /*
-         * If "dev->id" is negative we consider it as zero.
-         * The reason to do so is to avoid sysfs names that only make
-         * sense when there are multiple adapters.
-         */
-        i2c->adap.nr = dev->id != -1 ? dev->id : 0;
-
         ret = i2c_add_numbered_adapter(&i2c->adap);
         if (ret < 0) {
                 printk(KERN_INFO "I2C: Failed to add bus\n");
@@ -1080,6 +1080,7 @@ eadapt:
 ereqirq:
         clk_disable(i2c->clk);
         i2c_pxa_disable(dev);
+        iounmap(i2c->reg_base);
 eremap:
         clk_put(i2c->clk);
 eclk:
@@ -1089,7 +1090,7 @@ emalloc:
         return ret;
 }
 
-static int i2c_pxa_remove(struct platform_device *dev)
+static int __exit i2c_pxa_remove(struct platform_device *dev)
 {
         struct pxa_i2c *i2c = platform_get_drvdata(dev);
 
@@ -1103,6 +1104,7 @@ static int i2c_pxa_remove(struct platform_device *dev)
         clk_put(i2c->clk);
         i2c_pxa_disable(dev);
 
+        iounmap(i2c->reg_base);
         release_mem_region(i2c->iobase, i2c->iosize);
         kfree(i2c);
 
@@ -1111,9 +1113,10 @@ static int i2c_pxa_remove(struct platform_device *dev)
 
 static struct platform_driver i2c_pxa_driver = {
         .probe          = i2c_pxa_probe,
-        .remove         = i2c_pxa_remove,
+        .remove         = __exit_p(i2c_pxa_remove),
         .driver         = {
                 .name   = "pxa2xx-i2c",
+                .owner  = THIS_MODULE,
         },
 };
 
@@ -1122,7 +1125,7 @@ static int __init i2c_adap_pxa_init(void)
         return platform_driver_register(&i2c_pxa_driver);
 }
 
-static void i2c_adap_pxa_exit(void)
+static void __exit i2c_adap_pxa_exit(void)
 {
         platform_driver_unregister(&i2c_pxa_driver);
 }
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 310e497b5838..c8d0e8715997 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -670,8 +670,8 @@ static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector,
  * and attempt to recover if there are problems.  Returns  0 if everything's
  * ok; nonzero if the request has been terminated.
  */
-static
-int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw)
+static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
+                                int len, int ireason, int rw)
 {
         /*
          * ireason == 0: the drive wants to receive data from us
@@ -701,6 +701,9 @@ int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw)
                                 drive->name, __FUNCTION__, ireason);
         }
 
+        if (rq->cmd_type == REQ_TYPE_ATA_PC)
+                rq->cmd_flags |= REQ_FAILED;
+
         cdrom_end_request(drive, 0);
         return -1;
 }
@@ -1071,11 +1074,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
         /*
          * check which way to transfer data
          */
-        if (blk_fs_request(rq) || blk_pc_request(rq)) {
-                if (ide_cd_check_ireason(drive, len, ireason, write))
-                        return ide_stopped;
+        if (ide_cd_check_ireason(drive, rq, len, ireason, write))
+                return ide_stopped;
 
-                if (blk_fs_request(rq) && write == 0) {
+        if (blk_fs_request(rq)) {
+                if (write == 0) {
                         int nskip;
 
                         if (ide_cd_check_transfer_size(drive, len)) {
@@ -1101,16 +1104,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
         if (ireason == 0) {
                 write = 1;
                 xferfunc = HWIF(drive)->atapi_output_bytes;
-        } else if (ireason == 2 || (ireason == 1 &&
-                   (blk_fs_request(rq) || blk_pc_request(rq)))) {
+        } else {
                 write = 0;
                 xferfunc = HWIF(drive)->atapi_input_bytes;
-        } else {
-                printk(KERN_ERR "%s: %s: The drive "
-                                "appears confused (ireason = 0x%02x). "
-                                "Trying to recover by ending request.\n",
-                                drive->name, __FUNCTION__, ireason);
-                goto end_request;
         }
 
         /*
@@ -1182,11 +1178,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
                         else
                                 rq->data += blen;
                 }
+                if (!write && blk_sense_request(rq))
+                        rq->sense_len += blen;
         }
 
-        if (write && blk_sense_request(rq))
-                rq->sense_len += thislen;
-
         /*
          * pad, if necessary
          */
@@ -1931,6 +1926,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
         { "MATSHITADVD-ROM SR-8186", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
         { "MATSHITADVD-ROM SR-8176", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
         { "MATSHITADVD-ROM SR-8174", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
+        { "Optiarc DVD RW AD-5200A", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
         { NULL, NULL, 0 }
 };
 
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 8f5bed471050..39501d130256 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -867,7 +867,7 @@ static void idedisk_setup (ide_drive_t *drive)
 
         /* Only print cache size when it was specified */
         if (id->buf_size)
-                printk (" w/%dKiB Cache", id->buf_size/2);
+                printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2);
 
         printk(KERN_CONT ", CHS=%d/%d/%d\n",
                          drive->bios_cyl, drive->bios_head, drive->bios_sect);
@@ -949,7 +949,8 @@ static void ide_device_shutdown(ide_drive_t *drive)
                 return;
         }
 
-        printk("Shutdown: %s\n", drive->name);
+        printk(KERN_INFO "Shutdown: %s\n", drive->name);
+
         drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
 }
 
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index d0e7b537353e..2de99e4be5c9 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -1,9 +1,13 @@
 /*
+ *  IDE DMA support (including IDE PCI BM-DMA).
+ *
  *  Copyright (C) 1995-1998   Mark Lord
  *  Copyright (C) 1999-2000   Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2004, 2007  Bartlomiej Zolnierkiewicz
  *
  *  May be copied or modified under the terms of the GNU General Public License
+ *
+ *  DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
  */
 
 /*
@@ -11,49 +15,6 @@
  */
 
 /*
- * This module provides support for the bus-master IDE DMA functions
- * of various PCI chipsets, including the Intel PIIX (i82371FB for
- * the 430 FX chipset), the PIIX3 (i82371SB for the 430 HX/VX and 
- * 440 chipsets), and the PIIX4 (i82371AB for the 430 TX chipset)
- * ("PIIX" stands for "PCI ISA IDE Xcellerator").
- *
- * Pretty much the same code works for other IDE PCI bus-mastering chipsets.
- *
- * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
- *
- * By default, DMA support is prepared for use, but is currently enabled only
- * for drives which already have DMA enabled (UltraDMA or mode 2 multi/single),
- * or which are recognized as "good" (see table below).  Drives with only mode0
- * or mode1 (multi/single) DMA should also work with this chipset/driver
- * (eg. MC2112A) but are not enabled by default.
- *
- * Use "hdparm -i" to view modes supported by a given drive.
- *
- * The hdparm-3.5 (or later) utility can be used for manually enabling/disabling
- * DMA support, but must be (re-)compiled against this kernel version or later.
- *
- * To enable DMA, use "hdparm -d1 /dev/hd?" on a per-drive basis after booting.
- * If problems arise, ide.c will disable DMA operation after a few retries.
- * This error recovery mechanism works and has been extremely well exercised.
- *
- * IDE drives, depending on their vintage, may support several different modes
- * of DMA operation.  The boot-time modes are indicated with a "*" in
- * the "hdparm -i" listing, and can be changed with *knowledgeable* use of
- * the "hdparm -X" feature.  There is seldom a need to do this, as drives
- * normally power-up with their "best" PIO/DMA modes enabled.
- *
- * Testing has been done with a rather extensive number of drives,
- * with Quantum & Western Digital models generally outperforming the pack,
- * and Fujitsu & Conner (and some Seagate which are really Conner) drives
- * showing more lackluster throughput.
- *
- * Keep an eye on /var/adm/messages for "DMA disabled" messages.
- *
- * Some people have reported trouble with Intel Zappa motherboards.
- * This can be fixed by upgrading the AMI BIOS to version 1.00.04.BS0,
- * available from ftp://ftp.intel.com/pub/bios/10004bs0.exe
- * (thanks to Glen Morrell <glen@spin.Stanford.edu> for researching this).
- *
  * Thanks to "Christopher J. Reimer" <reimer@doe.carleton.ca> for
  * fixing the problem with the BIOS on some Acer motherboards.
  *
@@ -65,11 +26,6 @@
  *
  * Most importantly, thanks to Robert Bringman <rob@mars.trion.com>
  * for supplying a Promise UDMA board & WD UDMA drive for this work!
- *
- * And, yes, Intel Zappa boards really *do* use both PIIX IDE ports.
- *
- * ATA-66/100 and recovery functions, I forgot the rest......
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 4a2cb2868226..194ecb0049eb 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -756,7 +756,8 @@ static int ide_probe_port(ide_hwif_t *hwif)
 
         BUG_ON(hwif->present);
 
-        if (hwif->noprobe)
+        if (hwif->noprobe ||
+            (hwif->drives[0].noprobe && hwif->drives[1].noprobe))
                 return -EACCES;
 
         /*
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0598ecfd5f37..43e0e0557776 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3765,6 +3765,11 @@ static int ide_tape_probe(ide_drive_t *drive)
         g->fops = &idetape_block_ops;
         ide_register_region(g);
 
+        printk(KERN_WARNING "It is possible that this driver does not have any"
+                " users anymore and, as a result, it will be REMOVED soon."
+                " Please notify Bart <bzolnier@gmail.com> or Boris"
+                " <petkovbb@gmail.com> in case you still need it.\n");
+
         return 0;
 
 out_free_tape:
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 477833f0daf5..fa16bc30bbc9 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -590,11 +590,6 @@ void ide_unregister(unsigned int index, int init_default, int restore)
                 hwif->extra_ports = 0;
         }
 
-        /*
-         * Note that we only release the standard ports,
-         * and do not even try to handle any extra ports
-         * allocated for weird IDE interface chipsets.
-         */
         ide_hwif_release_regions(hwif);
 
         /* copy original settings */
@@ -1036,10 +1031,9 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
                         drive->nice1 = (arg >> IDE_NICE_1) & 1;
                         return 0;
                 case HDIO_DRIVE_RESET:
-                {
-                        unsigned long flags;
-                        if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-                        
+                        if (!capable(CAP_SYS_ADMIN))
+                                return -EACCES;
+
                         /*
                          *      Abort the current command on the
                          *      group if there is one, taking
@@ -1058,17 +1052,15 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
                         ide_abort(drive, "drive reset");
 
                         BUG_ON(HWGROUP(drive)->handler);
-                                
+
                         /* Ensure nothing gets queued after we
                            drop the lock. Reset will clear the busy */
-                   
+
                         HWGROUP(drive)->busy = 1;
                         spin_unlock_irqrestore(&ide_lock, flags);
                         (void) ide_do_reset(drive);
 
                         return 0;
-                }
-
                 case HDIO_GET_BUSSTATE:
                         if (!capable(CAP_SYS_ADMIN))
                                 return -EACCES;
@@ -1449,7 +1441,7 @@ static int __init ide_setup(char *s)
 
                         case -1: /* "noprobe" */
                                 hwif->noprobe = 1;
-                                goto done;
+                                goto obsolete_option;
 
                         case 1: /* base */
                                 vals[1] = vals[0] + 0x206; /* default ctl */
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index bba29df5f21d..2f4f47ad602f 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -334,43 +334,6 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
         hwif->drives[1].drive_data = t2;
 }
 
-/*
- * qd_unsetup:
- *
- * called to unsetup an ata channel : back to default values, unlinks tuning
- */
-/*
-static void __exit qd_unsetup(ide_hwif_t *hwif)
-{
-        u8 config = hwif->config_data;
-        int base = hwif->select_data;
-        void *set_pio_mode = (void *)hwif->set_pio_mode;
-
-        if (hwif->chipset != ide_qd65xx)
-                return;
-
-        printk(KERN_NOTICE "%s: back to defaults\n", hwif->name);
-
-        hwif->selectproc = NULL;
-        hwif->set_pio_mode = NULL;
-
-        if (set_pio_mode == (void *)qd6500_set_pio_mode) {
-                // will do it for both
-                outb(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
-        } else if (set_pio_mode == (void *)qd6580_set_pio_mode) {
-                if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
-                        outb(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
-                        outb(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1]));
-                } else {
-                        outb(hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
-                }
-        } else {
-                printk(KERN_WARNING "Unknown qd65xx tuning fonction !\n");
-                printk(KERN_WARNING "keeping settings !\n");
-        }
-}
-*/
-
 static const struct ide_port_info qd65xx_port_info __initdata = {
         .chipset                = ide_qd65xx,
         .host_flags             = IDE_HFLAG_IO_32BIT |
@@ -444,6 +407,8 @@ static int __init qd_probe(int base)
                 printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
                         config, control, QD_ID3);
 
+                outb(QD_DEF_CONTR, QD_CONTROL_PORT);
+
                 if (control & QD_CONTR_SEC_DISABLED) {
                         /* secondary disabled */
 
@@ -460,8 +425,6 @@ static int __init qd_probe(int base)
 
                         ide_device_add(idx, &qd65xx_port_info);
 
-                        outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
                         return 1;
                 } else {
                         ide_hwif_t *mate;
@@ -487,8 +450,6 @@ static int __init qd_probe(int base)
 
                         ide_device_add(idx, &qd65xx_port_info);
 
-                        outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
                         return 0; /* no other qd65xx possible */
                 }
         }
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index bd24dad3cfc6..ec667982809c 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -787,7 +787,8 @@ static int __init cmd640x_init(void)
         /*
          * Try to enable the secondary interface, if not already enabled
          */
-        if (cmd_hwif1->noprobe) {
+        if (cmd_hwif1->noprobe ||
+            (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) {
                 port2 = "not probed";
         } else {
                 b = get_cmd640_reg(CNTRL);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index d0f7bb8b8adf..6357bb6269ab 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1570,10 +1570,12 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
                 if (rev < 3)
                         info = &hpt36x;
                 else {
-                        static const struct hpt_info *hpt37x_info[] =
-                                { &hpt370, &hpt370a, &hpt372, &hpt372n };
-
-                        info = hpt37x_info[min_t(u8, rev, 6) - 3];
+                        switch (min_t(u8, rev, 6)) {
+                        case 3: info = &hpt370;  break;
+                        case 4: info = &hpt370a; break;
+                        case 5: info = &hpt372;  break;
+                        case 6: info = &hpt372n; break;
+                        }
                         idx++;
                 }
                 break;
@@ -1626,7 +1628,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
         return ide_setup_pci_device(dev, &d);
 }
 
-static const struct pci_device_id hpt366_pci_tbl[] = {
+static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366),  0 },
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372),  1 },
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302),  2 },
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 28e155a9e2a5..9e2b1964d71a 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -183,6 +183,9 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
  *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
  *   Don't use this with devices which don't have this bug.
  *
+ * - delay inquiry
+ *   Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
+ *
  * - override internal blacklist
  *   Instead of adding to the built-in blacklist, use only the workarounds
  *   specified in the module load parameter.
@@ -195,6 +198,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
         ", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
         ", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
         ", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+        ", delay inquiry = "      __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
         ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
         ", or a combination)");
 
@@ -357,6 +361,11 @@ static const struct {
                 .workarounds            = SBP2_WORKAROUND_INQUIRY_36 |
                                           SBP2_WORKAROUND_MODE_SENSE_8,
         },
+        /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+                .firmware_revision      = 0x002800,
+                .model_id               = 0x000000,
+                .workarounds            = SBP2_WORKAROUND_DELAY_INQUIRY,
+        },
         /* Initio bridges, actually only needed for some older ones */ {
                 .firmware_revision      = 0x000200,
                 .model_id               = SBP2_ROM_VALUE_WILDCARD,
@@ -914,6 +923,9 @@ static int sbp2_start_device(struct sbp2_lu *lu)
         sbp2_agent_reset(lu, 1);
         sbp2_max_speed_and_size(lu);
 
+        if (lu->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
+                ssleep(SBP2_INQUIRY_DELAY);
+
         error = scsi_add_device(lu->shost, 0, lu->ud->id, 0);
         if (error) {
                 SBP2_ERR("scsi_add_device failed");
@@ -1962,6 +1974,9 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
 {
         struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
 
+        if (sdev->lun != 0 || sdev->id != lu->ud->id || sdev->channel != 0)
+                return -ENODEV;
+
         lu->sdev = sdev;
         sdev->allow_restart = 1;
 
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index d2ecb0d8a1bb..80d8e097b065 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -343,6 +343,8 @@ enum sbp2lu_state_types {
 #define SBP2_WORKAROUND_INQUIRY_36      0x2
 #define SBP2_WORKAROUND_MODE_SENSE_8    0x4
 #define SBP2_WORKAROUND_FIX_CAPACITY    0x8
+#define SBP2_WORKAROUND_DELAY_INQUIRY   0x10
+#define SBP2_INQUIRY_DELAY              12
 #define SBP2_WORKAROUND_OVERRIDE        0x100
 
 #endif /* SBP2_H */
diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c
index 73bfd1656f86..b8797c66676d 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_mem.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c
@@ -136,14 +136,8 @@ int build_phys_page_list(struct ib_phys_buf *buffer_list,
 
         /* Find largest page shift we can use to cover buffers */
         for (*shift = PAGE_SHIFT; *shift < 27; ++(*shift))
-                if (num_phys_buf > 1) {
-                        if ((1ULL << *shift) & mask)
-                                break;
-                } else
-                        if (1ULL << *shift >=
-                            buffer_list[0].size +
-                            (buffer_list[0].addr & ((1ULL << *shift) - 1)))
-                                break;
+                if ((1ULL << *shift) & mask)
+                        break;
 
         buffer_list[0].size += buffer_list[0].addr & ((1ULL << *shift) - 1);
         buffer_list[0].addr &= ~0ull << *shift;
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 7f8853b44ee1..b2112f5a422f 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -567,12 +567,12 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i
 
         /* Init the adapter */
         nesdev->nesadapter = nes_init_adapter(nesdev, hw_rev);
-        nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval;
         if (!nesdev->nesadapter) {
                 printk(KERN_ERR PFX "Unable to initialize adapter.\n");
                 ret = -ENOMEM;
                 goto bail5;
         }
+        nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval;
 
         /* nesdev->base_doorbell_index =
                         nesdev->nesadapter->pd_config_base[PCI_FUNC(nesdev->pcidev->devfn)]; */
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index fd57e8a1582f..a48b288618ec 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -285,6 +285,21 @@ struct nes_device {
 };
 
 
+static inline __le32 get_crc_value(struct nes_v4_quad *nes_quad)
+{
+        u32 crc_value;
+        crc_value = crc32c(~0, (void *)nes_quad, sizeof (struct nes_v4_quad));
+
+        /*
+         * With commit ef19454b ("[LIB] crc32c: Keep intermediate crc
+         * state in cpu order"), behavior of crc32c changes on
+         * big-endian platforms.  Our algorithm expects the previous
+         * behavior; otherwise we have RDMA connection establishment
+         * issue on big-endian.
+         */
+        return cpu_to_le32(crc_value);
+}
+
 static inline void
 set_wqe_64bit_value(__le32 *wqe_words, u32 index, u64 value)
 {
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index bd5cfeaac203..39adb267fb15 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -370,11 +370,11 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
         int ret = 0;
         u32 was_timer_set;
 
+        if (!cm_node)
+                return -EINVAL;
         new_send = kzalloc(sizeof(*new_send), GFP_ATOMIC);
         if (!new_send)
                 return -1;
-        if (!cm_node)
-                return -EINVAL;
 
         /* new_send->timetosend = currenttime */
         new_send->retrycount = NES_DEFAULT_RETRYS;
@@ -947,6 +947,7 @@ static int mini_cm_dec_refcnt_listen(struct nes_cm_core *cm_core,
                 nes_debug(NES_DBG_CM, "destroying listener (%p)\n", listener);
 
                 kfree(listener);
+                listener = NULL;
                 ret = 0;
                 cm_listens_destroyed++;
         } else {
@@ -2319,6 +2320,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
         struct iw_cm_event cm_event;
         struct nes_hw_qp_wqe *wqe;
         struct nes_v4_quad nes_quad;
+        u32 crc_value;
         int ret;
 
         ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
@@ -2435,8 +2437,8 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
         nes_quad.TcpPorts[1]   = cm_id->local_addr.sin_port;
 
         /* Produce hash key */
-        nesqp->hte_index = cpu_to_be32(
-                        crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff);
+        crc_value = get_crc_value(&nes_quad);
+        nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
         nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n",
                         nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
 
@@ -2750,6 +2752,7 @@ void cm_event_connected(struct nes_cm_event *event)
         struct iw_cm_event cm_event;
         struct nes_hw_qp_wqe *wqe;
         struct nes_v4_quad nes_quad;
+        u32 crc_value;
         int ret;
 
         /* get all our handles */
@@ -2827,8 +2830,8 @@ void cm_event_connected(struct nes_cm_event *event)
         nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
 
         /* Produce hash key */
-        nesqp->hte_index = cpu_to_be32(
-                        crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff);
+        crc_value = get_crc_value(&nes_quad);
+        nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
         nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, After CRC = 0x%08X\n",
                         nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask);
 
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 7c4c0fbf0abd..49e53e4c1ebe 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -156,15 +156,14 @@ static void nes_nic_tune_timer(struct nes_device *nesdev)
 
         spin_lock_irqsave(&nesadapter->periodic_timer_lock, flags);
 
-        if (shared_timer->cq_count_old < cq_count) {
-                if (cq_count > shared_timer->threshold_low)
-                        shared_timer->cq_direction_downward=0;
-        }
-        if (shared_timer->cq_count_old >= cq_count)
+        if (shared_timer->cq_count_old <= cq_count)
+                shared_timer->cq_direction_downward = 0;
+        else
                 shared_timer->cq_direction_downward++;
         shared_timer->cq_count_old = cq_count;
         if (shared_timer->cq_direction_downward > NES_NIC_CQ_DOWNWARD_TREND) {
-                if (cq_count <= shared_timer->threshold_low) {
+                if (cq_count <= shared_timer->threshold_low &&
+                    shared_timer->threshold_low > 4) {
                         shared_timer->threshold_low = shared_timer->threshold_low/2;
                         shared_timer->cq_direction_downward=0;
                         nesdev->currcq_count = 0;
@@ -1728,7 +1727,6 @@ int nes_napi_isr(struct nes_device *nesdev)
                         nesdev->int_req &= ~NES_INT_TIMER;
                         nes_write32(nesdev->regs+NES_INTF_INT_MASK, ~(nesdev->intf_int_req));
                         nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req);
-                        nesadapter->tune_timer.timer_in_use_old = 0;
                 }
                 nesdev->deepcq_count = 0;
                 return 1;
@@ -1867,7 +1865,6 @@ void nes_dpc(unsigned long param)
                                         nesdev->int_req &= ~NES_INT_TIMER;
                                         nes_write32(nesdev->regs + NES_INTF_INT_MASK, ~(nesdev->intf_int_req));
                                         nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req);
-                                        nesdev->nesadapter->tune_timer.timer_in_use_old = 0;
                                 } else {
                                         nes_write32(nesdev->regs+NES_INT_MASK, 0x0000ffff|(~nesdev->int_req));
                                 }
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 1e10df550c9e..b7e2844f096b 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -962,7 +962,7 @@ struct nes_arp_entry {
 #define DEFAULT_JUMBO_NES_QL_LOW    12
 #define DEFAULT_JUMBO_NES_QL_TARGET 40
 #define DEFAULT_JUMBO_NES_QL_HIGH   128
-#define NES_NIC_CQ_DOWNWARD_TREND   8
+#define NES_NIC_CQ_DOWNWARD_TREND   16
 
 struct nes_hw_tune_timer {
     //u16 cq_count;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 4dafbe16e82a..a651e9d9f0ef 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -929,7 +929,7 @@ static struct ib_pd *nes_alloc_pd(struct ib_device *ibdev,
                                 NES_MAX_USER_DB_REGIONS, nesucontext->first_free_db);
                 nes_debug(NES_DBG_PD, "find_first_zero_biton doorbells returned %u, mapping pd_id %u.\n",
                                 nespd->mmap_db_index, nespd->pd_id);
-                if (nespd->mmap_db_index > NES_MAX_USER_DB_REGIONS) {
+                if (nespd->mmap_db_index >= NES_MAX_USER_DB_REGIONS) {
                         nes_debug(NES_DBG_PD, "mmap_db_index > MAX\n");
                         nes_free_resource(nesadapter, nesadapter->allocated_pds, pd_num);
                         kfree(nespd);
@@ -1327,7 +1327,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd,
                                                                   (long long unsigned int)req.user_wqe_buffers);
                                                         nes_free_resource(nesadapter, nesadapter->allocated_qps, qp_num);
                                                         kfree(nesqp->allocated_buffer);
-                                                        return ERR_PTR(-ENOMEM);
+                                                        return ERR_PTR(-EFAULT);
                                                 }
                                         }
 
@@ -1674,6 +1674,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
                 }
                 nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n",
                                 (unsigned long)req.user_cq_buffer, entries);
+                err = 1;
                 list_for_each_entry(nespbl, &nes_ucontext->cq_reg_mem_list, list) {
                         if (nespbl->user_base == (unsigned long )req.user_cq_buffer) {
                                 list_del(&nespbl->list);
@@ -1686,7 +1687,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
                 if (err) {
                         nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
                         kfree(nescq);
-                        return ERR_PTR(err);
+                        return ERR_PTR(-EFAULT);
                 }
 
                 pbl_entries = nespbl->pbl_size >> 3;
@@ -1831,9 +1832,6 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries,
                                 spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
                         }
                 }
-                nes_debug(NES_DBG_CQ, "iWARP CQ%u create timeout expired, major code = 0x%04X,"
-                                " minor code = 0x%04X\n",
-                                nescq->hw_cq.cq_number, cqp_request->major_code, cqp_request->minor_code);
                 if (!context)
                         pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
                                         nescq->hw_cq.cq_pbase);
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 0c303c84b37b..6b6df8679585 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -632,8 +632,7 @@ mpt_deregister(u8 cb_idx)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *      mpt_event_register - Register protocol-specific event callback
- *      handler.
+ *      mpt_event_register - Register protocol-specific event callback handler.
  *      @cb_idx: previously registered (via mpt_register) callback handle
  *      @ev_cbfunc: callback function
  *
@@ -654,8 +653,7 @@ mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *      mpt_event_deregister - Deregister protocol-specific event callback
- *      handler.
+ *      mpt_event_deregister - Deregister protocol-specific event callback handler
  *      @cb_idx: previously registered callback handle
  *
  *      Each protocol-specific driver should call this routine
@@ -765,11 +763,13 @@ mpt_device_driver_deregister(u8 cb_idx)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *      mpt_get_msg_frame - Obtain a MPT request frame from the pool (of 1024)
- *      allocated per MPT adapter.
+ *      mpt_get_msg_frame - Obtain an MPT request frame from the pool
  *      @cb_idx: Handle of registered MPT protocol driver
  *      @ioc: Pointer to MPT adapter structure
  *
+ *      Obtain an MPT request frame from the pool (of 1024) that are
+ *      allocated per MPT adapter.
+ *
  *      Returns pointer to a MPT request frame or %NULL if none are available
  *      or IOC is not active.
  */
@@ -834,13 +834,12 @@ mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
- *      mpt_put_msg_frame - Send a protocol specific MPT request frame
- *      to a IOC.
+ *      mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
  *      @cb_idx: Handle of registered MPT protocol driver
  *      @ioc: Pointer to MPT adapter structure
  *      @mf: Pointer to MPT request frame
  *
- *      This routine posts a MPT request frame to the request post FIFO of a
+ *      This routine posts an MPT request frame to the request post FIFO of a
  *      specific MPT adapter.
  */
 void
@@ -868,13 +867,15 @@ mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 }
 
 /**
- *      mpt_put_msg_frame_hi_pri - Send a protocol specific MPT request frame
- *      to a IOC using hi priority request queue.
+ *      mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
  *      @cb_idx: Handle of registered MPT protocol driver
  *      @ioc: Pointer to MPT adapter structure
  *      @mf: Pointer to MPT request frame
  *
- *      This routine posts a MPT request frame to the request post FIFO of a
+ *      Send a protocol-specific MPT request frame to an IOC using
+ *      hi-priority request queue.
+ *
+ *      This routine posts an MPT request frame to the request post FIFO of a
  *      specific MPT adapter.
  **/
 void
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index af1de0ccee2f..0c252f60c4c1 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1533,7 +1533,7 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
  *
  *      Remark: Currently invoked from a non-interrupt thread (_bh).
  *
- *      Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
+ *      Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC
  *      will be active.
  *
  *      Returns 0 for SUCCESS, or %FAILED.
@@ -2537,14 +2537,12 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR
 
 /**
  * mptscsih_get_scsi_lookup
- *
- * retrieves scmd entry from ScsiLookup[] array list
- *
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * Returns the scsi_cmd pointer
+ * retrieves scmd entry from ScsiLookup[] array list
  *
+ * Returns the scsi_cmd pointer
  **/
 static struct scsi_cmnd *
 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
@@ -2561,14 +2559,12 @@ mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
 
 /**
  * mptscsih_getclear_scsi_lookup
- *
- * retrieves and clears scmd entry from ScsiLookup[] array list
- *
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
  *
- * Returns the scsi_cmd pointer
+ * retrieves and clears scmd entry from ScsiLookup[] array list
  *
+ * Returns the scsi_cmd pointer
  **/
 static struct scsi_cmnd *
 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f337800076c0..a0f0e605d630 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -90,6 +90,11 @@ config MACVLAN
           This allows one to create virtual interfaces that map packets to
           or from specific MAC addresses to a particular interface.
 
+          Macvlan devices can be added using the "ip" command from the
+          iproute2 package starting with the iproute2-2.6.23 release:
+
+          "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
           To compile this driver as a module, choose M here: the module
           will be called macvlan.
 
@@ -2363,6 +2368,7 @@ config GELIC_NET
 config GELIC_WIRELESS
        bool "PS3 Wireless support"
        depends on GELIC_NET
+       select WIRELESS_EXT
        help
         This option adds the support for the wireless feature of PS3.
         If you have the wireless-less model of PS3 or have no plan to
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index afc7f34b1dcf..8af142ccf373 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -1,6 +1,6 @@
 /* bnx2x.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -10,13 +10,13 @@
  * Based on code from Michael Chan's bnx2 driver
  * UDP CSUM errata workaround by Arik Gendelman
  * Slowpath rework by Vladislav Zolotarov
- * Statistics and Link managment by Yitchak Gertner
+ * Statistics and Link management by Yitchak Gertner
  *
  */
 
 /* define this to make the driver freeze on error
  * to allow getting debug info
- * (you will need to reboot afterwords)
+ * (you will need to reboot afterwards)
  */
 /*#define BNX2X_STOP_ON_ERROR*/
 
@@ -63,22 +63,21 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "0.40.15"
-#define DRV_MODULE_RELDATE      "$DateTime: 2007/11/15 07:28:37 $"
-#define BNX2X_BC_VER            0x040009
+#define DRV_MODULE_VERSION      "1.40.22"
+#define DRV_MODULE_RELDATE      "2007/11/27"
+#define BNX2X_BC_VER            0x040200
 
 /* Time in jiffies before concluding the transmitter is hung. */
 #define TX_TIMEOUT              (5*HZ)
 
 static char version[] __devinitdata =
-        "Broadcom NetXtreme II 577xx 10Gigabit Ethernet Driver "
+        "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
         DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
-MODULE_INFO(cvs_version, "$Revision: #356 $");
 
 static int use_inta;
 static int poll;
@@ -94,8 +93,8 @@ module_param(debug, int, 0);
 MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X");
 MODULE_PARM_DESC(poll, "use polling (for debug)");
 MODULE_PARM_DESC(onefunc, "enable only first function");
-MODULE_PARM_DESC(nomcp, "ignore managment CPU (Implies onefunc)");
-MODULE_PARM_DESC(debug, "defualt debug msglevel");
+MODULE_PARM_DESC(nomcp, "ignore management CPU (Implies onefunc)");
+MODULE_PARM_DESC(debug, "default debug msglevel");
 
 #ifdef BNX2X_MULTI
 module_param(use_multi, int, 0);
@@ -298,8 +297,7 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 
 static int bnx2x_mc_assert(struct bnx2x *bp)
 {
-        int i, j;
-        int rc = 0;
+        int i, j, rc = 0;
         char last_idx;
         const char storm[] = {"XTCU"};
         const u32 intmem_base[] = {
@@ -313,8 +311,9 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
         for (i = 0; i < 4; i++) {
                 last_idx = REG_RD8(bp, XSTORM_ASSERT_LIST_INDEX_OFFSET +
                                    intmem_base[i]);
-                BNX2X_ERR("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n",
-                          storm[i], last_idx);
+                if (last_idx)
+                        BNX2X_LOG("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n",
+                                  storm[i], last_idx);
 
                 /* print the asserts */
                 for (j = 0; j < STROM_ASSERT_ARRAY_SIZE; j++) {
@@ -330,7 +329,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
                                       intmem_base[i]);
 
                         if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
-                                BNX2X_ERR("DATA %cSTORM_ASSERT_INDEX 0x%x ="
+                                BNX2X_LOG("DATA %cSTORM_ASSERT_INDEX 0x%x ="
                                           " 0x%08x 0x%08x 0x%08x 0x%08x\n",
                                           storm[i], j, row3, row2, row1, row0);
                                 rc++;
@@ -341,6 +340,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
         }
         return rc;
 }
+
 static void bnx2x_fw_dump(struct bnx2x *bp)
 {
         u32 mark, offset;
@@ -348,21 +348,22 @@ static void bnx2x_fw_dump(struct bnx2x *bp)
         int word;
 
         mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
-        printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+        mark = ((mark + 0x3) & ~0x3);
+        printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
 
         for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
                 for (word = 0; word < 8; word++)
                         data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
                                                   offset + 4*word));
                 data[8] = 0x0;
-                printk(KERN_ERR PFX "%s", (char *)data);
+                printk(KERN_CONT "%s", (char *)data);
         }
         for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) {
                 for (word = 0; word < 8; word++)
                         data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
                                                   offset + 4*word));
                 data[8] = 0x0;
-                printk(KERN_ERR PFX "%s", (char *)data);
+                printk(KERN_CONT "%s", (char *)data);
         }
         printk("\n" KERN_ERR PFX "end of fw dump\n");
 }
@@ -427,10 +428,10 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
                 }
         }
 
-        BNX2X_ERR("def_c_idx(%u)  def_u_idx(%u)  def_t_idx(%u)"
-                  "  def_x_idx(%u)  def_att_idx(%u)  attn_state(%u)"
+        BNX2X_ERR("def_c_idx(%u)  def_u_idx(%u)  def_x_idx(%u)"
+                  "  def_t_idx(%u)  def_att_idx(%u)  attn_state(%u)"
                   "  spq_prod_idx(%u)\n",
-                  bp->def_c_idx, bp->def_u_idx, bp->def_t_idx, bp->def_x_idx,
+                  bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx,
                   bp->def_att_idx, bp->attn_state, bp->spq_prod_idx);
 
 
@@ -441,7 +442,7 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
         DP(BNX2X_MSG_STATS, "stats_state - DISABLE\n");
 }
 
-static void bnx2x_enable_int(struct bnx2x *bp)
+static void bnx2x_int_enable(struct bnx2x *bp)
 {
         int port = bp->port;
         u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
@@ -454,18 +455,26 @@ static void bnx2x_enable_int(struct bnx2x *bp)
                         HC_CONFIG_0_REG_ATTN_BIT_EN_0);
         } else {
                 val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+                        HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
                         HC_CONFIG_0_REG_INT_LINE_EN_0 |
                         HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+
+                /* Errata A0.158 workaround */
+                DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  MSI-X %d\n",
+                   val, port, addr, msix);
+
+                REG_WR(bp, addr, val);
+
                 val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
         }
 
-        DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  msi %d\n",
+        DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x)  MSI-X %d\n",
            val, port, addr, msix);
 
         REG_WR(bp, addr, val);
 }
 
-static void bnx2x_disable_int(struct bnx2x *bp)
+static void bnx2x_int_disable(struct bnx2x *bp)
 {
         int port = bp->port;
         u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
@@ -484,15 +493,15 @@ static void bnx2x_disable_int(struct bnx2x *bp)
                 BNX2X_ERR("BUG! proper val not read from IGU!\n");
 }
 
-static void bnx2x_disable_int_sync(struct bnx2x *bp)
+static void bnx2x_int_disable_sync(struct bnx2x *bp)
 {
 
         int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
         int i;
 
         atomic_inc(&bp->intr_sem);
-        /* prevent the HW from sending interrupts*/
-        bnx2x_disable_int(bp);
+        /* prevent the HW from sending interrupts */
+        bnx2x_int_disable(bp);
 
         /* make sure all ISRs are done */
         if (msix) {
@@ -775,6 +784,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
                 mb(); /* force bnx2x_wait_ramrod to see the change */
                 return;
         }
+
         switch (command | bp->state) {
         case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT):
                 DP(NETIF_MSG_IFUP, "got setup ramrod\n");
@@ -787,20 +797,20 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
                 fp->state = BNX2X_FP_STATE_HALTED;
                 break;
 
-        case (RAMROD_CMD_ID_ETH_PORT_DEL | BNX2X_STATE_CLOSING_WAIT4_DELETE):
-                DP(NETIF_MSG_IFDOWN, "got delete ramrod\n");
-                bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
-                break;
-
         case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_CLOSING_WAIT4_HALT):
-                DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", cid);
-                bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_DELETED;
+                DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n",
+                   cid);
+                bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
                 break;
 
         case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
                 DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
                 break;
 
+        case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT):
+                DP(NETIF_MSG_IFUP, "got (un)set mac ramrod\n");
+                break;
+
         default:
                 BNX2X_ERR("unexpected ramrod (%d)  state is %x\n",
                           command, bp->state);
@@ -1179,12 +1189,175 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
         return val;
 }
 
+static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+{
+        u32 cnt;
+        u32 lock_status;
+        u32 resource_bit = (1 << resource);
+        u8 func = bp->port;
+
+        /* Validating that the resource is within range */
+        if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+                DP(NETIF_MSG_HW,
+                   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+                   resource, HW_LOCK_MAX_RESOURCE_VALUE);
+                return -EINVAL;
+        }
+
+        /* Validating that the resource is not already taken */
+        lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+        if (lock_status & resource_bit) {
+                DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
+                   lock_status, resource_bit);
+                return -EEXIST;
+        }
+
+        /* Try for 1 second every 5ms */
+        for (cnt = 0; cnt < 200; cnt++) {
+                /* Try to acquire the lock */
+                REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4,
+                       resource_bit);
+                lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+                if (lock_status & resource_bit)
+                        return 0;
+
+                msleep(5);
+        }
+        DP(NETIF_MSG_HW, "Timeout\n");
+        return -EAGAIN;
+}
+
+static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+{
+        u32 lock_status;
+        u32 resource_bit = (1 << resource);
+        u8 func = bp->port;
+
+        /* Validating that the resource is within range */
+        if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+                DP(NETIF_MSG_HW,
+                   "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+                   resource, HW_LOCK_MAX_RESOURCE_VALUE);
+                return -EINVAL;
+        }
+
+        /* Validating that the resource is currently taken */
+        lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+        if (!(lock_status & resource_bit)) {
+                DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
+                   lock_status, resource_bit);
+                return -EFAULT;
+        }
+
+        REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit);
+        return 0;
+}
+
+static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+{
+        /* The GPIO should be swapped if swap register is set and active */
+        int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+                         REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port;
+        int gpio_shift = gpio_num +
+                        (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+        u32 gpio_mask = (1 << gpio_shift);
+        u32 gpio_reg;
+
+        if (gpio_num > MISC_REGISTERS_GPIO_3) {
+                BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+                return -EINVAL;
+        }
+
+        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+        /* read GPIO and mask except the float bits */
+        gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+        switch (mode) {
+        case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+                DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
+                   gpio_num, gpio_shift);
+                /* clear FLOAT and set CLR */
+                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+                gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+                break;
+
+        case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+                DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
+                   gpio_num, gpio_shift);
+                /* clear FLOAT and set SET */
+                gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+                gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+                break;
+
+        case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+                DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
+                   gpio_num, gpio_shift);
+                /* set FLOAT */
+                gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+                break;
+
+        default:
+                break;
+        }
+
+        REG_WR(bp, MISC_REG_GPIO, gpio_reg);
+        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+
+        return 0;
+}
+
+static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
+{
+        u32 spio_mask = (1 << spio_num);
+        u32 spio_reg;
+
+        if ((spio_num < MISC_REGISTERS_SPIO_4) ||
+            (spio_num > MISC_REGISTERS_SPIO_7)) {
+                BNX2X_ERR("Invalid SPIO %d\n", spio_num);
+                return -EINVAL;
+        }
+
+        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+        /* read SPIO and mask except the float bits */
+        spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
+
+        switch (mode) {
+        case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+                DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
+                /* clear FLOAT and set CLR */
+                spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+                spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
+                break;
+
+        case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+                DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
+                /* clear FLOAT and set SET */
+                spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+                spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
+                break;
+
+        case MISC_REGISTERS_SPIO_INPUT_HI_Z:
+                DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
+                /* set FLOAT */
+                spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+                break;
+
+        default:
+                break;
+        }
+
+        REG_WR(bp, MISC_REG_SPIO, spio_reg);
+        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+
+        return 0;
+}
+
 static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val)
 {
-        int rc;
-        u32 tmp, i;
         int port = bp->port;
         u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+        u32 tmp;
+        int i, rc;
 
 /*      DP(NETIF_MSG_HW, "phy_addr 0x%x  reg 0x%x  val 0x%08x\n",
            bp->phy_addr, reg, val); */
@@ -1236,8 +1409,8 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
 {
         int port = bp->port;
         u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-        u32 val, i;
-        int rc;
+        u32 val;
+        int i, rc;
 
         if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
 
@@ -1286,58 +1459,54 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
         return rc;
 }
 
-static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl,
+                                   u32 phy_addr, u32 reg, u32 addr, u32 val)
 {
-        int rc = 0;
-        u32 tmp, i;
-        int port = bp->port;
-        u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
-                tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                tmp &= ~EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-                REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                udelay(40);
-        }
+        u32 tmp;
+        int i, rc = 0;
 
-        /* set clause 45 mode */
-        tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        tmp |= EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
+        /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+         * (a value of 49==0x31) and make sure that the AUTO poll is off
+         */
+        tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+        tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
+                (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
+        REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        udelay(40);
 
         /* address */
-        tmp = ((bp->phy_addr << 21) | (reg << 16) | addr |
+        tmp = ((phy_addr << 21) | (reg << 16) | addr |
                EMAC_MDIO_COMM_COMMAND_ADDRESS |
                EMAC_MDIO_COMM_START_BUSY);
-        EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
 
         for (i = 0; i < 50; i++) {
                 udelay(10);
 
-                tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                 if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
                         udelay(5);
                         break;
                 }
         }
-
         if (tmp & EMAC_MDIO_COMM_START_BUSY) {
                 BNX2X_ERR("write phy register failed\n");
 
                 rc = -EBUSY;
+
         } else {
                 /* data */
-                tmp = ((bp->phy_addr << 21) | (reg << 16) | val |
+                tmp = ((phy_addr << 21) | (reg << 16) | val |
                        EMAC_MDIO_COMM_COMMAND_WRITE_45 |
                        EMAC_MDIO_COMM_START_BUSY);
-                EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+                REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
 
                 for (i = 0; i < 50; i++) {
                         udelay(10);
 
-                        tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                        tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                         if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
                                 udelay(5);
                                 break;
@@ -1351,75 +1520,78 @@ static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
                 }
         }
 
-        /* unset clause 45 mode */
-        tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        tmp &= ~EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
-                tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+        /* unset clause 45 mode, set the MDIO clock to a faster value
+         * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+         */
+        tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+        tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
                 tmp |= EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-        }
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
 
         return rc;
 }
 
-static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
-                             u32 *ret_val)
+static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg,
+                              u32 addr, u32 val)
 {
-        int port = bp->port;
-        u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-        u32 val, i;
-        int rc = 0;
+        u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+        return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr,
+                                       reg, addr, val);
+}
 
-                val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                val &= ~EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-                REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-                udelay(40);
-        }
+static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl,
+                                  u32 phy_addr, u32 reg, u32 addr,
+                                  u32 *ret_val)
+{
+        u32 val;
+        int i, rc = 0;
 
-        /* set clause 45 mode */
-        val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        val |= EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
+        /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+         * (a value of 49==0x31) and make sure that the AUTO poll is off
+         */
+        val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+        val |= (EMAC_MDIO_MODE_CLAUSE_45 |
+                (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
+        REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        udelay(40);
 
         /* address */
-        val = ((bp->phy_addr << 21) | (reg << 16) | addr |
+        val = ((phy_addr << 21) | (reg << 16) | addr |
                EMAC_MDIO_COMM_COMMAND_ADDRESS |
                EMAC_MDIO_COMM_START_BUSY);
-        EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
 
         for (i = 0; i < 50; i++) {
                 udelay(10);
 
-                val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                 if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
                         udelay(5);
                         break;
                 }
         }
-
         if (val & EMAC_MDIO_COMM_START_BUSY) {
                 BNX2X_ERR("read phy register failed\n");
 
                 *ret_val = 0;
                 rc = -EBUSY;
+
         } else {
                 /* data */
-                val = ((bp->phy_addr << 21) | (reg << 16) |
+                val = ((phy_addr << 21) | (reg << 16) |
                        EMAC_MDIO_COMM_COMMAND_READ_45 |
                        EMAC_MDIO_COMM_START_BUSY);
-                EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+                REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
 
                 for (i = 0; i < 50; i++) {
                         udelay(10);
 
-                        val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+                        val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
                         if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
                                 val &= EMAC_MDIO_COMM_DATA;
                                 break;
@@ -1436,31 +1608,39 @@ static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
                 *ret_val = val;
         }
 
-        /* unset clause 45 mode */
-        val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
-        val &= ~EMAC_MDIO_MODE_CLAUSE_45;
-        EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-
-        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
-                val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+        /* unset clause 45 mode, set the MDIO clock to a faster value
+         * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+         */
+        val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+        val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+        val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+        if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
                 val |= EMAC_MDIO_MODE_AUTO_POLL;
-                EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-        }
+        REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
 
         return rc;
 }
 
-static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg,
+                             u32 addr, u32 *ret_val)
+{
+        u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+        return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr,
+                                      reg, addr, ret_val);
+}
+
+static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg,
+                               u32 addr, u32 val)
 {
         int i;
         u32 rd_val;
 
         might_sleep();
         for (i = 0; i < 10; i++) {
-                bnx2x_mdio45_write(bp, reg, addr, val);
+                bnx2x_mdio45_write(bp, phy_addr, reg, addr, val);
                 msleep(5);
-                bnx2x_mdio45_read(bp, reg, addr, &rd_val);
+                bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val);
                 /* if the read value is not the same as the value we wrote,
                    we should write it again */
                 if (rd_val == val)
@@ -1471,18 +1651,81 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
 }
 
 /*
- * link managment
+ * link management
  */
 
+static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result)
+{
+        switch (pause_result) {                 /* ASYM P ASYM P */
+        case 0xb:                               /*   1  0   1  1 */
+                bp->flow_ctrl = FLOW_CTRL_TX;
+                break;
+
+        case 0xe:                               /*   1  1   1  0 */
+                bp->flow_ctrl = FLOW_CTRL_RX;
+                break;
+
+        case 0x5:                               /*   0  1   0  1 */
+        case 0x7:                               /*   0  1   1  1 */
+        case 0xd:                               /*   1  1   0  1 */
+        case 0xf:                               /*   1  1   1  1 */
+                bp->flow_ctrl = FLOW_CTRL_BOTH;
+                break;
+
+        default:
+                break;
+        }
+}
+
+static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp)
+{
+        u32 ext_phy_addr;
+        u32 ld_pause;   /* local */
+        u32 lp_pause;   /* link partner */
+        u32 an_complete; /* AN complete */
+        u32 pause_result;
+        u8 ret = 0;
+
+        ext_phy_addr = ((bp->ext_phy_config &
+                         PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+        /* read twice */
+        bnx2x_mdio45_read(bp, ext_phy_addr,
+                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                          EXT_PHY_KR_STATUS, &an_complete);
+        bnx2x_mdio45_read(bp, ext_phy_addr,
+                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                          EXT_PHY_KR_STATUS, &an_complete);
+
+        if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) {
+                ret = 1;
+                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                  EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                  EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause);
+                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                  EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                  EXT_PHY_KR_LP_AUTO_NEG, &lp_pause);
+                pause_result = (ld_pause &
+                                EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8;
+                pause_result |= (lp_pause &
+                                 EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10;
+                DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
+                   pause_result);
+                bnx2x_pause_resolve(bp, pause_result);
+        }
+        return ret;
+}
+
 static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
 {
-        u32 ld_pause;   /* local driver */
-        u32 lp_pause;   /* link partner */
+        u32 ld_pause;   /* local driver */
+        u32 lp_pause;   /* link partner */
         u32 pause_result;
 
         bp->flow_ctrl = 0;
 
-        /* reolve from gp_status in case of AN complete and not sgmii */
+        /* resolve from gp_status in case of AN complete and not sgmii */
         if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
             (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
             (!(bp->phy_flags & PHY_SGMII_FLAG)) &&
@@ -1499,45 +1742,57 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
                 pause_result |= (lp_pause &
                                  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
                 DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
+                bnx2x_pause_resolve(bp, pause_result);
+        } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) ||
+                   !(bnx2x_ext_phy_resove_fc(bp))) {
+                /* forced speed */
+                if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+                        switch (bp->req_flow_ctrl) {
+                        case FLOW_CTRL_AUTO:
+                                if (bp->dev->mtu <= 4500)
+                                        bp->flow_ctrl = FLOW_CTRL_BOTH;
+                                else
+                                        bp->flow_ctrl = FLOW_CTRL_TX;
+                                break;
 
-                switch (pause_result) {                 /* ASYM P ASYM P */
-                case 0xb:                               /*   1  0   1  1 */
-                        bp->flow_ctrl = FLOW_CTRL_TX;
-                        break;
-
-                case 0xe:                               /*   1  1   1  0 */
-                        bp->flow_ctrl = FLOW_CTRL_RX;
-                        break;
+                        case FLOW_CTRL_TX:
+                                bp->flow_ctrl = FLOW_CTRL_TX;
+                                break;
 
-                case 0x5:                               /*   0  1   0  1 */
-                case 0x7:                               /*   0  1   1  1 */
-                case 0xd:                               /*   1  1   0  1 */
-                case 0xf:                               /*   1  1   1  1 */
-                        bp->flow_ctrl = FLOW_CTRL_BOTH;
-                        break;
+                        case FLOW_CTRL_RX:
+                                if (bp->dev->mtu <= 4500)
+                                        bp->flow_ctrl = FLOW_CTRL_RX;
+                                break;
 
-                default:
-                        break;
-                }
+                        case FLOW_CTRL_BOTH:
+                                if (bp->dev->mtu <= 4500)
+                                        bp->flow_ctrl = FLOW_CTRL_BOTH;
+                                else
+                                        bp->flow_ctrl = FLOW_CTRL_TX;
+                                break;
 
-        } else { /* forced mode */
-                switch (bp->req_flow_ctrl) {
-                case FLOW_CTRL_AUTO:
-                        if (bp->dev->mtu <= 4500)
-                                bp->flow_ctrl = FLOW_CTRL_BOTH;
-                        else
-                                bp->flow_ctrl = FLOW_CTRL_TX;
-                        break;
+                        case FLOW_CTRL_NONE:
+                        default:
+                                break;
+                        }
+                } else { /* forced mode */
+                        switch (bp->req_flow_ctrl) {
+                        case FLOW_CTRL_AUTO:
+                                DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+                                                   " req_autoneg 0x%x\n",
+                                   bp->req_flow_ctrl, bp->req_autoneg);
+                                break;
 
-                case FLOW_CTRL_TX:
-                case FLOW_CTRL_RX:
-                case FLOW_CTRL_BOTH:
-                        bp->flow_ctrl = bp->req_flow_ctrl;
-                        break;
+                        case FLOW_CTRL_TX:
+                        case FLOW_CTRL_RX:
+                        case FLOW_CTRL_BOTH:
+                                bp->flow_ctrl = bp->req_flow_ctrl;
+                                break;
 
-                case FLOW_CTRL_NONE:
-                default:
-                        break;
+                        case FLOW_CTRL_NONE:
+                        default:
+                                break;
+                        }
                 }
         }
         DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl);
@@ -1548,9 +1803,9 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
         bp->link_status = 0;
 
         if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
-                DP(NETIF_MSG_LINK, "link up\n");
+                DP(NETIF_MSG_LINK, "phy link up\n");
 
-                bp->link_up = 1;
+                bp->phy_link_up = 1;
                 bp->link_status |= LINK_STATUS_LINK_UP;
 
                 if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
@@ -1659,20 +1914,20 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
                        bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
 
         } else { /* link_down */
-                DP(NETIF_MSG_LINK, "link down\n");
+                DP(NETIF_MSG_LINK, "phy link down\n");
 
-                bp->link_up = 0;
+                bp->phy_link_up = 0;
 
                 bp->line_speed = 0;
                 bp->duplex = DUPLEX_FULL;
                 bp->flow_ctrl = 0;
         }
 
-        DP(NETIF_MSG_LINK, "gp_status 0x%x  link_up %d\n"
+        DP(NETIF_MSG_LINK, "gp_status 0x%x  phy_link_up %d\n"
            DP_LEVEL "  line_speed %d  duplex %d  flow_ctrl 0x%x"
                     "  link_status 0x%x\n",
-           gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl,
-           bp->link_status);
+           gp_status, bp->phy_link_up, bp->line_speed, bp->duplex,
+           bp->flow_ctrl, bp->link_status);
 }
 
 static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
@@ -1680,40 +1935,40 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
         int port = bp->port;
 
         /* first reset all status
-         * we asume only one line will be change at a time */
+         * we assume only one line will be change at a time */
         bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                       (NIG_XGXS0_LINK_STATUS |
-                        NIG_SERDES0_LINK_STATUS |
-                        NIG_STATUS_INTERRUPT_XGXS0_LINK10G));
-        if (bp->link_up) {
+                       (NIG_STATUS_XGXS0_LINK10G |
+                        NIG_STATUS_XGXS0_LINK_STATUS |
+                        NIG_STATUS_SERDES0_LINK_STATUS));
+        if (bp->phy_link_up) {
                 if (is_10g) {
                         /* Disable the 10G link interrupt
                          * by writing 1 to the status register
                          */
-                        DP(NETIF_MSG_LINK, "10G XGXS link up\n");
+                        DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
                         bnx2x_bits_en(bp,
                                       NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                                      NIG_STATUS_INTERRUPT_XGXS0_LINK10G);
+                                      NIG_STATUS_XGXS0_LINK10G);
 
                 } else if (bp->phy_flags & PHY_XGXS_FLAG) {
                         /* Disable the link interrupt
                          * by writing 1 to the relevant lane
                          * in the status register
                          */
-                        DP(NETIF_MSG_LINK, "1G XGXS link up\n");
+                        DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
                         bnx2x_bits_en(bp,
                                       NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
                                       ((1 << bp->ser_lane) <<
-                                       NIG_XGXS0_LINK_STATUS_SIZE));
+                                       NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
 
                 } else { /* SerDes */
-                        DP(NETIF_MSG_LINK, "SerDes link up\n");
+                        DP(NETIF_MSG_LINK, "SerDes phy link up\n");
                         /* Disable the link interrupt
                          * by writing 1 to the status register
                          */
                         bnx2x_bits_en(bp,
                                       NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                                      NIG_SERDES0_LINK_STATUS);
+                                      NIG_STATUS_SERDES0_LINK_STATUS);
                 }
 
         } else { /* link_down */
@@ -1724,91 +1979,182 @@ static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp)
 {
         u32 ext_phy_type;
         u32 ext_phy_addr;
-        u32 local_phy;
-        u32 val = 0;
+        u32 val1 = 0, val2;
         u32 rx_sd, pcs_status;
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                local_phy = bp->phy_addr;
                 ext_phy_addr = ((bp->ext_phy_config &
                                  PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
                                 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-                bp->phy_addr = (u8)ext_phy_addr;
 
                 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                         DP(NETIF_MSG_LINK, "XGXS Direct\n");
-                        val = 1;
+                        val1 = 1;
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
                         DP(NETIF_MSG_LINK, "XGXS 8705\n");
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_WIS_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_WIS_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
                                           EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
-                        val = (rx_sd & 0x1);
+                        DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
+                        val1 = (rx_sd & 0x1);
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
                         DP(NETIF_MSG_LINK, "XGXS 8706\n");
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
-                                          EXT_PHY_OPT_LASI_STATUS, &val);
-                        DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
                                           EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
-                        bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD,
-                                         EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PCS_DEVAD,
+                                          EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_AUTO_NEG_DEVAD,
+                                          EXT_PHY_OPT_AN_LINK_STATUS, &val2);
+
                         DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
-                           "  pcs_status 0x%x\n", rx_sd, pcs_status);
-                        /* link is up if both bit 0 of pmd_rx and
-                         * bit 0 of pcs_status are set
+                           "  pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n",
+                           rx_sd, pcs_status, val2, (val2 & (1<<1)));
+                        /* link is up if both bit 0 of pmd_rx_sd and
+                         * bit 0 of pcs_status are set, or if the autoneg bit
+                           1 is set
                          */
-                        val = (rx_sd & pcs_status);
+                        val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+
+                        /* clear the interrupt LASI status register */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PCS_DEVAD,
+                                               EXT_PHY_KR_LASI_STATUS, &val2);
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PCS_DEVAD,
+                                               EXT_PHY_KR_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n",
+                           val2, val1);
+                        /* Check the LASI */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                                               0x9003, &val2);
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                                               0x9003, &val1);
+                        DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
+                           val2, val1);
+                        /* Check the link status */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                               ext_phy_addr,
+                                               EXT_PHY_KR_PCS_DEVAD,
+                                               EXT_PHY_KR_PCS_STATUS, &val2);
+                        DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
+                        /* Check the link status on 1.1.2 */
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                          ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val2);
+                        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                          ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val1);
+                        DP(NETIF_MSG_LINK,
+                           "KR PMA status 0x%x->0x%x\n", val2, val1);
+                        val1 = ((val1 & 4) == 4);
+                        /* If 1G was requested assume the link is up */
+                        if (!(bp->req_autoneg & AUTONEG_SPEED) &&
+                            (bp->req_line_speed == SPEED_1000))
+                                val1 = 1;
+                        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val2);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_OPT_LASI_STATUS, &val1);
+                        DP(NETIF_MSG_LINK,
+                           "10G-base-T LASI status 0x%x->0x%x\n", val2, val1);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val2);
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                          EXT_PHY_KR_STATUS, &val1);
+                        DP(NETIF_MSG_LINK,
+                           "10G-base-T PMA status 0x%x->0x%x\n", val2, val1);
+                        val1 = ((val1 & 4) == 4);
+                        /* if link is up
+                         * print the AN outcome of the SFX7101 PHY
+                         */
+                        if (val1) {
+                                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                                  EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                  0x21, &val2);
+                                DP(NETIF_MSG_LINK,
+                                   "SFX7101 AN status 0x%x->%s\n", val2,
+                                   (val2 & (1<<14)) ? "Master" : "Slave");
+                        }
                         break;
 
                 default:
                         DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
                            bp->ext_phy_config);
-                        val = 0;
+                        val1 = 0;
                         break;
                 }
-                bp->phy_addr = local_phy;
 
         } else { /* SerDes */
                 ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
                         DP(NETIF_MSG_LINK, "SerDes Direct\n");
-                        val = 1;
+                        val1 = 1;
                         break;
 
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
                         DP(NETIF_MSG_LINK, "SerDes 5482\n");
-                        val = 1;
+                        val1 = 1;
                         break;
 
                 default:
                         DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
                            bp->ext_phy_config);
-                        val = 0;
+                        val1 = 0;
                         break;
                 }
         }
 
-        return val;
+        return val1;
 }
 
 static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
@@ -1819,7 +2165,7 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
         u32 wb_write[2];
         u32 val;
 
-        DP(NETIF_MSG_LINK, "enableing BigMAC\n");
+        DP(NETIF_MSG_LINK, "enabling BigMAC\n");
         /* reset and unreset the BigMac */
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
                (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
@@ -1933,6 +2279,35 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
         bp->stats_state = STATS_STATE_ENABLE;
 }
 
+static void bnx2x_bmac_rx_disable(struct bnx2x *bp)
+{
+        int port = bp->port;
+        u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+                               NIG_REG_INGRESS_BMAC0_MEM;
+        u32 wb_write[2];
+
+        /* Only if the bmac is out of reset */
+        if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+                        (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) {
+                /* Clear Rx Enable bit in BMAC_CONTROL register */
+#ifdef BNX2X_DMAE_RD
+                bnx2x_read_dmae(bp, bmac_addr +
+                                BIGMAC_REGISTER_BMAC_CONTROL, 2);
+                wb_write[0] = *bnx2x_sp(bp, wb_data[0]);
+                wb_write[1] = *bnx2x_sp(bp, wb_data[1]);
+#else
+                wb_write[0] = REG_RD(bp,
+                                bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL);
+                wb_write[1] = REG_RD(bp,
+                                bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4);
+#endif
+                wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE;
+                REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+                            wb_write, 2);
+                msleep(1);
+        }
+}
+
 static void bnx2x_emac_enable(struct bnx2x *bp)
 {
         int port = bp->port;
@@ -1940,7 +2315,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp)
         u32 val;
         int timeout;
 
-        DP(NETIF_MSG_LINK, "enableing EMAC\n");
+        DP(NETIF_MSG_LINK, "enabling EMAC\n");
         /* reset and unreset the emac core */
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
                (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
@@ -2033,7 +2408,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp)
                                       EMAC_TX_MODE_EXT_PAUSE_EN);
         }
 
-        /* KEEP_VLAN_TAG, promiscous */
+        /* KEEP_VLAN_TAG, promiscuous */
         val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
         val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
         EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
@@ -2161,7 +2536,6 @@ static void bnx2x_pbf_update(struct bnx2x *bp)
         u32 count = 1000;
         u32 pause = 0;
 
-
         /* disable port */
         REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
 
@@ -2232,7 +2606,7 @@ static void bnx2x_pbf_update(struct bnx2x *bp)
 static void bnx2x_update_mng(struct bnx2x *bp)
 {
         if (!nomcp)
-                SHMEM_WR(bp, drv_fw_mb[bp->port].link_status,
+                SHMEM_WR(bp, port_mb[bp->port].link_status,
                          bp->link_status);
 }
 
@@ -2294,19 +2668,19 @@ static void bnx2x_link_down(struct bnx2x *bp)
                 DP(BNX2X_MSG_STATS, "stats_state - STOP\n");
         }
 
-        /* indicate link down */
+        /* indicate no mac active */
         bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG);
 
-        /* reset BigMac */
-        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
-               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+        /* update shared memory */
+        bnx2x_update_mng(bp);
 
-        /* ignore drain flag interrupt */
         /* activate nig drain */
         NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
 
-        /* update shared memory */
-        bnx2x_update_mng(bp);
+        /* reset BigMac */
+        bnx2x_bmac_rx_disable(bp);
+        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
 
         /* indicate link down */
         bnx2x_link_report(bp);
@@ -2317,14 +2691,15 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp);
 /* This function is called upon link interrupt */
 static void bnx2x_link_update(struct bnx2x *bp)
 {
-        u32 gp_status;
         int port = bp->port;
         int i;
+        u32 gp_status;
         int link_10g;
 
-        DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x,"
+        DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
            " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
-           " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG),
+           " 10G %x, XGXS_LINK %x\n", port,
+           (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
            REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
            REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask,
            REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
@@ -2336,7 +2711,7 @@ static void bnx2x_link_update(struct bnx2x *bp)
         might_sleep();
         MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS);
         /* avoid fast toggling */
-        for (i = 0 ; i < 10 ; i++) {
+        for (i = 0; i < 10; i++) {
                 msleep(10);
                 bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1,
                                   &gp_status);
@@ -2351,7 +2726,8 @@ static void bnx2x_link_update(struct bnx2x *bp)
         bnx2x_link_int_ack(bp, link_10g);
 
         /* link is up only if both local phy and external phy are up */
-        if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) {
+        bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp));
+        if (bp->link_up) {
                 if (link_10g) {
                         bnx2x_bmac_enable(bp, 0);
                         bnx2x_leds_set(bp, SPEED_10000);
@@ -2427,7 +2803,9 @@ static void bnx2x_reset_unicore(struct bnx2x *bp)
                 }
         }
 
-        BNX2X_ERR("BUG! unicore is still in reset!\n");
+        BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n",
+                  (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+                  bp->phy_addr);
 }
 
 static void bnx2x_set_swap_lanes(struct bnx2x *bp)
@@ -2475,12 +2853,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
                 MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT);
 
                 bnx2x_mdio22_write(bp,
-                                   MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
+                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
 
                 bnx2x_mdio22_read(bp,
-                                 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
-                                  &control2);
+                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+                                &control2);
 
                 if (bp->autoneg & AUTONEG_PARALLEL) {
                         control2 |=
@@ -2490,8 +2868,14 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
                    ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
                 }
                 bnx2x_mdio22_write(bp,
-                                 MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
-                                   control2);
+                                MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+                                control2);
+
+                /* Disable parallel detection of HiG */
+                MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
+                bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
+                                MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
+                                MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
         }
 }
 
@@ -2625,7 +3009,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp)
         MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
 
         /* set extended capabilities */
-        if (bp->advertising & ADVERTISED_2500baseT_Full)
+        if (bp->advertising & ADVERTISED_2500baseX_Full)
                 val |= MDIO_OVER_1G_UP1_2_5G;
         if (bp->advertising & ADVERTISED_10000baseT_Full)
                 val |= MDIO_OVER_1G_UP1_10G;
@@ -2641,20 +3025,91 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp)
         /* for AN, we are always publishing full duplex */
         an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
 
-        /* set pause */
-        switch (bp->pause_mode) {
-        case PAUSE_SYMMETRIC:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
-                break;
-        case PAUSE_ASYMMETRIC:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
-                break;
-        case PAUSE_BOTH:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
-                break;
-        case PAUSE_NONE:
-                an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
-                break;
+        /* resolve pause mode and advertisement
+         * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
+        if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+                switch (bp->req_flow_ctrl) {
+                case FLOW_CTRL_AUTO:
+                        if (bp->dev->mtu <= 4500) {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                                bp->advertising |= (ADVERTISED_Pause |
+                                                    ADVERTISED_Asym_Pause);
+                        } else {
+                                an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                                bp->advertising |= ADVERTISED_Asym_Pause;
+                        }
+                        break;
+
+                case FLOW_CTRL_TX:
+                        an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                        bp->advertising |= ADVERTISED_Asym_Pause;
+                        break;
+
+                case FLOW_CTRL_RX:
+                        if (bp->dev->mtu <= 4500) {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                                bp->advertising |= (ADVERTISED_Pause |
+                                                    ADVERTISED_Asym_Pause);
+                        } else {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+                                bp->advertising &= ~(ADVERTISED_Pause |
+                                                     ADVERTISED_Asym_Pause);
+                        }
+                        break;
+
+                case FLOW_CTRL_BOTH:
+                        if (bp->dev->mtu <= 4500) {
+                                an_adv |=
+                                     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                                bp->advertising |= (ADVERTISED_Pause |
+                                                    ADVERTISED_Asym_Pause);
+                        } else {
+                                an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                                bp->advertising |= ADVERTISED_Asym_Pause;
+                        }
+                        break;
+
+                case FLOW_CTRL_NONE:
+                default:
+                        an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+                        bp->advertising &= ~(ADVERTISED_Pause |
+                                             ADVERTISED_Asym_Pause);
+                        break;
+                }
+        } else { /* forced mode */
+                switch (bp->req_flow_ctrl) {
+                case FLOW_CTRL_AUTO:
+                        DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+                                           " req_autoneg 0x%x\n",
+                           bp->req_flow_ctrl, bp->req_autoneg);
+                        break;
+
+                case FLOW_CTRL_TX:
+                        an_adv |=
+                               MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+                        bp->advertising |= ADVERTISED_Asym_Pause;
+                        break;
+
+                case FLOW_CTRL_RX:
+                case FLOW_CTRL_BOTH:
+                        an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+                        bp->advertising |= (ADVERTISED_Pause |
+                                            ADVERTISED_Asym_Pause);
+                        break;
+
+                case FLOW_CTRL_NONE:
+                default:
+                        an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+                        bp->advertising &= ~(ADVERTISED_Pause |
+                                             ADVERTISED_Asym_Pause);
+                        break;
+                }
         }
 
         MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
@@ -2752,47 +3207,162 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x *bp)
 static void bnx2x_link_int_enable(struct bnx2x *bp)
 {
         int port = bp->port;
+        u32 ext_phy_type;
+        u32 mask;
 
         /* setting the status to report on link up
            for either XGXS or SerDes */
         bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-                       (NIG_XGXS0_LINK_STATUS |
-                        NIG_STATUS_INTERRUPT_XGXS0_LINK10G |
-                        NIG_SERDES0_LINK_STATUS));
+                       (NIG_STATUS_XGXS0_LINK10G |
+                        NIG_STATUS_XGXS0_LINK_STATUS |
+                        NIG_STATUS_SERDES0_LINK_STATUS));
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                /* TBD -
-                 * in force mode (not AN) we can enable just the relevant
-                 * interrupt
-                 * Even in AN we might enable only one according to the AN
-                 * speed mask
-                 */
-                bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                              (NIG_MASK_XGXS0_LINK_STATUS |
-                               NIG_MASK_XGXS0_LINK10G));
-                DP(NETIF_MSG_LINK, "enable XGXS interrupt\n");
+                mask = (NIG_MASK_XGXS0_LINK10G |
+                        NIG_MASK_XGXS0_LINK_STATUS);
+                DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
+                ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+                if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+                    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+                    (ext_phy_type !=
+                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
+                        mask |= NIG_MASK_MI_INT;
+                        DP(NETIF_MSG_LINK, "enabled external phy int\n");
+                }
 
         } else { /* SerDes */
-                bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                              NIG_MASK_SERDES0_LINK_STATUS);
-                DP(NETIF_MSG_LINK, "enable SerDes interrupt\n");
+                mask = NIG_MASK_SERDES0_LINK_STATUS;
+                DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
+                ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
+                if ((ext_phy_type !=
+                                PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+                    (ext_phy_type !=
+                                PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
+                        mask |= NIG_MASK_MI_INT;
+                        DP(NETIF_MSG_LINK, "enabled external phy int\n");
+                }
         }
+        bnx2x_bits_en(bp,
+                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+                      mask);
+        DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
+           " int_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
+           " 10G %x, XGXS_LINK %x\n", port,
+           (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+           REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
+           REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+           REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
+           REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
+           REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
+           REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
+        );
+}
+
+static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp)
+{
+        u32 ext_phy_addr = ((bp->ext_phy_config &
+                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u32 fw_ver1, fw_ver2;
+
+        /* Need to wait 200ms after reset */
+        msleep(200);
+        /* Boot port from external ROM
+         * Set ser_boot_ctl bit in the MISC_CTRL1 register
+         */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                EXT_PHY_KR_MISC_CTRL1, 0x0001);
+
+        /* Reset internal microprocessor */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+                                EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+        /* set micro reset = 0 */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+                                EXT_PHY_KR_ROM_MICRO_RESET);
+        /* Reset internal microprocessor */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+                                EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+        /* wait for 100ms for code download via SPI port */
+        msleep(100);
+
+        /* Clear ser_boot_ctl bit */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                EXT_PHY_KR_MISC_CTRL1, 0x0000);
+        /* Wait 100ms */
+        msleep(100);
+
+        /* Print the PHY FW version */
+        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                               0xca19, &fw_ver1);
+        bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+                               EXT_PHY_KR_PMA_PMD_DEVAD,
+                               0xca1a, &fw_ver2);
+        DP(NETIF_MSG_LINK,
+           "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
+}
+
+static void bnx2x_bcm8072_force_10G(struct bnx2x *bp)
+{
+        u32 ext_phy_addr = ((bp->ext_phy_config &
+                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+        /* Force KR or KX */
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL,
+                                0x2040);
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2,
+                                0x000b);
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL,
+                                0x0000);
+        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+                                EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL,
+                                0x0000);
 }
 
 static void bnx2x_ext_phy_init(struct bnx2x *bp)
 {
-        int port = bp->port;
         u32 ext_phy_type;
         u32 ext_phy_addr;
-        u32 local_phy;
+        u32 cnt;
+        u32 ctrl;
+        u32 val = 0;
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                local_phy = bp->phy_addr;
                 ext_phy_addr = ((bp->ext_phy_config &
                                  PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
                                 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
 
                 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+                /* Make sure that the soft reset is off (expect for the 8072:
+                 * due to the lock, it will be done inside the specific
+                 * handling)
+                 */
+                if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+                    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+                   (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
+                    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) {
+                        /* Wait for soft reset to get cleared upto 1 sec */
+                        for (cnt = 0; cnt < 1000; cnt++) {
+                                bnx2x_mdio45_read(bp, ext_phy_addr,
+                                                  EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                  EXT_PHY_OPT_CNTL, &ctrl);
+                                if (!(ctrl & (1<<15)))
+                                        break;
+                                msleep(1);
+                        }
+                        DP(NETIF_MSG_LINK,
+                           "control reg 0x%x (after %d ms)\n", ctrl, cnt);
+                }
+
                 switch (ext_phy_type) {
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
                         DP(NETIF_MSG_LINK, "XGXS Direct\n");
@@ -2800,49 +3370,235 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
                         DP(NETIF_MSG_LINK, "XGXS 8705\n");
-                        bnx2x_bits_en(bp,
-                                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                                      NIG_MASK_MI_INT);
-                        DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
 
-                        bp->phy_addr = ext_phy_type;
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_PMD_MISC_CNTL,
                                             0x8288);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_PHY_IDENTIFIER,
                                             0x7fbf);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_CMU_PLL_BYPASS,
                                             0x0100);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD,
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_WIS_DEVAD,
                                             EXT_PHY_OPT_LASI_CNTL, 0x1);
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
                         DP(NETIF_MSG_LINK, "XGXS 8706\n");
-                        bnx2x_bits_en(bp,
-                                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                                      NIG_MASK_MI_INT);
-                        DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
-
-                        bp->phy_addr = ext_phy_type;
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
-                                            EXT_PHY_OPT_PMD_DIGITAL_CNT,
-                                            0x400);
-                        bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+
+                        if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+                                /* Force speed */
+                                if (bp->req_line_speed == SPEED_10000) {
+                                        DP(NETIF_MSG_LINK,
+                                           "XGXS 8706 force 10Gbps\n");
+                                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_PMD_DIGITAL_CNT,
+                                                0x400);
+                                } else {
+                                        /* Force 1Gbps */
+                                        DP(NETIF_MSG_LINK,
+                                           "XGXS 8706 force 1Gbps\n");
+
+                                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_CNTL,
+                                                0x0040);
+
+                                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_CNTL2,
+                                                0x000D);
+                                }
+
+                                /* Enable LASI */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                    EXT_PHY_OPT_LASI_CNTL,
+                                                    0x1);
+                        } else {
+                                /* AUTONEG */
+                                /* Allow CL37 through CL73 */
+                                DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_CL37_CL73,
+                                                    0x040c);
+
+                                /* Enable Full-Duplex advertisment on CL37 */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_CL37_FD,
+                                                    0x0020);
+                                /* Enable CL37 AN */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_CL37_AN,
+                                                    0x1000);
+                                /* Advertise 10G/1G support */
+                                if (bp->advertising &
+                                    ADVERTISED_1000baseT_Full)
+                                        val = (1<<5);
+                                if (bp->advertising &
+                                    ADVERTISED_10000baseT_Full)
+                                        val |= (1<<7);
+
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_AUTO_NEG_DEVAD,
+                                                    EXT_PHY_OPT_AN_ADV, val);
+                                /* Enable LASI */
+                                bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                                    EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                    EXT_PHY_OPT_LASI_CNTL,
+                                                    0x1);
+
+                                /* Enable clause 73 AN */
+                                bnx2x_mdio45_write(bp, ext_phy_addr,
+                                                   EXT_PHY_AUTO_NEG_DEVAD,
+                                                   EXT_PHY_OPT_CNTL,
+                                                   0x1200);
+                        }
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        /* Wait for soft reset to get cleared upto 1 sec */
+                        for (cnt = 0; cnt < 1000; cnt++) {
+                                bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                                EXT_PHY_OPT_CNTL, &ctrl);
+                                if (!(ctrl & (1<<15)))
+                                        break;
+                                msleep(1);
+                        }
+                        DP(NETIF_MSG_LINK,
+                           "8072 control reg 0x%x (after %d ms)\n",
+                           ctrl, cnt);
+
+                        bnx2x_bcm8072_external_rom_boot(bp);
+                        DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n");
+
+                        /* enable LASI */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                                0x9000, 0x0400);
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                                EXT_PHY_KR_LASI_CNTL, 0x0004);
+
+                        /* If this is forced speed, set to KR or KX
+                         * (all other are not supported)
+                         */
+                        if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+                                if (bp->req_line_speed == SPEED_10000) {
+                                        bnx2x_bcm8072_force_10G(bp);
+                                        DP(NETIF_MSG_LINK,
+                                           "Forced speed 10G on 8072\n");
+                                        /* unlock */
+                                        bnx2x_hw_unlock(bp,
+                                                HW_LOCK_RESOURCE_8072_MDIO);
+                                        break;
+                                } else
+                                        val = (1<<5);
+                        } else {
+
+                                /* Advertise 10G/1G support */
+                                if (bp->advertising &
+                                                ADVERTISED_1000baseT_Full)
+                                        val = (1<<5);
+                                if (bp->advertising &
+                                                ADVERTISED_10000baseT_Full)
+                                        val |= (1<<7);
+                        }
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                        ext_phy_addr,
+                                        EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                        0x11, val);
+                        /* Add support for CL37 ( passive mode ) I */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                0x8370, 0x040c);
+                        /* Add support for CL37 ( passive mode ) II */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                0xffe4, 0x20);
+                        /* Add support for CL37 ( passive mode ) III */
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                                0xffe0, 0x1000);
+                        /* Restart autoneg */
+                        msleep(500);
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                        ext_phy_addr,
+                                        EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                        EXT_PHY_KR_CTRL, 0x1200);
+                        DP(NETIF_MSG_LINK, "8072 Autoneg Restart: "
+                           "1G %ssupported  10G %ssupported\n",
+                           (val & (1<<5)) ? "" : "not ",
+                           (val & (1<<7)) ? "" : "not ");
+
+                        /* unlock */
+                        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        DP(NETIF_MSG_LINK,
+                           "Setting the SFX7101 LASI indication\n");
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
                                             EXT_PHY_OPT_LASI_CNTL, 0x1);
+                        DP(NETIF_MSG_LINK,
+                           "Setting the SFX7101 LED to blink on traffic\n");
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_OPT_PMA_PMD_DEVAD,
+                                            0xC007, (1<<3));
+
+                        /* read modify write pause advertizing */
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                          EXT_PHY_KR_AUTO_NEG_ADVERT, &val);
+                        val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH;
+                        /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+                        if (bp->advertising & ADVERTISED_Pause)
+                                val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE;
+
+                        if (bp->advertising & ADVERTISED_Asym_Pause) {
+                                val |=
+                                 EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC;
+                        }
+                        DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val);
+                        bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+                                            EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                            EXT_PHY_KR_AUTO_NEG_ADVERT, val);
+                        /* Restart autoneg */
+                        bnx2x_mdio45_read(bp, ext_phy_addr,
+                                          EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                          EXT_PHY_KR_CTRL, &val);
+                        val |= 0x200;
+                        bnx2x_mdio45_write(bp, ext_phy_addr,
+                                            EXT_PHY_KR_AUTO_NEG_DEVAD,
+                                            EXT_PHY_KR_CTRL, val);
                         break;
 
                 default:
-                        DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
-                           bp->ext_phy_config);
+                        BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n",
+                                  bp->ext_phy_config);
                         break;
                 }
-                bp->phy_addr = local_phy;
 
         } else { /* SerDes */
-/*              ext_phy_addr = ((bp->ext_phy_config &
+/*              ext_phy_addr = ((bp->ext_phy_config &
                                  PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
                                 PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
 */
@@ -2854,10 +3610,6 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
 
                 case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
                         DP(NETIF_MSG_LINK, "SerDes 5482\n");
-                        bnx2x_bits_en(bp,
-                                      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
-                                      NIG_MASK_MI_INT);
-                        DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
                         break;
 
                 default:
@@ -2871,8 +3623,22 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
 static void bnx2x_ext_phy_reset(struct bnx2x *bp)
 {
         u32 ext_phy_type;
-        u32 ext_phy_addr;
-        u32 local_phy;
+        u32 ext_phy_addr = ((bp->ext_phy_config &
+                             PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+                            PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+        u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+        /* The PHY reset is controled by GPIO 1
+         * Give it 1ms of reset pulse
+         */
+        if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+            (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                               MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                msleep(1);
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                               MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+        }
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
                 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
@@ -2883,15 +3649,24 @@ static void bnx2x_ext_phy_reset(struct bnx2x *bp)
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
-                        DP(NETIF_MSG_LINK, "XGXS 8705/6\n");
-                        local_phy = bp->phy_addr;
-                        ext_phy_addr = ((bp->ext_phy_config &
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-                                        PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-                        bp->phy_addr = (u8)ext_phy_addr;
-                        bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+                        DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
+                        bnx2x_mdio45_write(bp, ext_phy_addr,
+                                           EXT_PHY_OPT_PMA_PMD_DEVAD,
                                            EXT_PHY_OPT_CNTL, 0xa040);
-                        bp->phy_addr = local_phy;
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        DP(NETIF_MSG_LINK, "XGXS 8072\n");
+                        bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+                                                ext_phy_addr,
+                                                EXT_PHY_KR_PMA_PMD_DEVAD,
+                                                0, 1<<15);
+                        bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
                         break;
 
                 default:
@@ -2930,6 +3705,7 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
                         NIG_MASK_SERDES0_LINK_STATUS |
                         NIG_MASK_MI_INT));
 
+        /* Activate the external PHY */
         bnx2x_ext_phy_reset(bp);
 
         bnx2x_set_aer_mmd(bp);
@@ -2994,13 +3770,13 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
                         /* AN enabled */
                         bnx2x_set_brcm_cl37_advertisment(bp);
 
-                        /* program duplex & pause advertisment (for aneg) */
+                        /* program duplex & pause advertisement (for aneg) */
                         bnx2x_set_ieee_aneg_advertisment(bp);
 
                         /* enable autoneg */
                         bnx2x_set_autoneg(bp);
 
-                        /* enalbe and restart AN */
+                        /* enable and restart AN */
                         bnx2x_restart_autoneg(bp);
                 }
 
@@ -3010,11 +3786,11 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
                 bnx2x_initialize_sgmii_process(bp);
         }
 
-        /* enable the interrupt */
-        bnx2x_link_int_enable(bp);
-
         /* init ext phy and enable link state int */
         bnx2x_ext_phy_init(bp);
+
+        /* enable the interrupt */
+        bnx2x_link_int_enable(bp);
 }
 
 static void bnx2x_phy_deassert(struct bnx2x *bp)
@@ -3073,6 +3849,11 @@ static int bnx2x_phy_init(struct bnx2x *bp)
 static void bnx2x_link_reset(struct bnx2x *bp)
 {
         int port = bp->port;
+        u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+        /* update shared memory */
+        bp->link_status = 0;
+        bnx2x_update_mng(bp);
 
         /* disable attentions */
         bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
@@ -3081,21 +3862,45 @@ static void bnx2x_link_reset(struct bnx2x *bp)
                         NIG_MASK_SERDES0_LINK_STATUS |
                         NIG_MASK_MI_INT));
 
-        bnx2x_ext_phy_reset(bp);
+        /* activate nig drain */
+        NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+        /* disable nig egress interface */
+        NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+        NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+
+        /* Stop BigMac rx */
+        bnx2x_bmac_rx_disable(bp);
+
+        /* disable emac */
+        NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+        msleep(10);
+
+        /* The PHY reset is controled by GPIO 1
+         * Hold it as output low
+         */
+        if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+            (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+                bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                               MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                DP(NETIF_MSG_LINK, "reset external PHY\n");
+        }
 
         /* reset the SerDes/XGXS */
         REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
                (0x1ff << (port*16)));
 
-        /* reset EMAC / BMAC and disable NIG interfaces */
-        NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
-        NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+        /* reset BigMac */
+        REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+               (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
 
-        NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+        /* disable nig ingress interface */
+        NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
         NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0);
-        NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
 
-        NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+        /* set link down */
+        bp->link_up = 0;
 }
 
 #ifdef BNX2X_XGXS_LB
@@ -3158,7 +3963,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
         int port = bp->port;
 
         DP(NETIF_MSG_TIMER,
-           "spe (%x:%x)  command %x  hw_cid %x  data (%x:%x)  left %x\n",
+           "spe (%x:%x)  command %d  hw_cid %x  data (%x:%x)  left %x\n",
            (u32)U64_HI(bp->spq_mapping), (u32)(U64_LO(bp->spq_mapping) +
            (void *)bp->spq_prod_bd - (void *)bp->spq), command,
            HW_CID(bp, cid), data_hi, data_lo, bp->spq_left);
@@ -3176,6 +3981,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
                 bnx2x_panic();
                 return -EBUSY;
         }
+
         /* CID needs port number to be encoded int it */
         bp->spq_prod_bd->hdr.conn_and_cmd_data =
                         cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) |
@@ -3282,8 +4088,8 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
         u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_PORT_BASE * port) * 8;
         u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
                               MISC_REG_AEU_MASK_ATTN_FUNC_0;
-        u32 nig_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
-                                   NIG_REG_MASK_INTERRUPT_PORT0;
+        u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
+                                       NIG_REG_MASK_INTERRUPT_PORT0;
 
         if (~bp->aeu_mask & (asserted & 0xff))
                 BNX2X_ERR("IGU ERROR\n");
@@ -3301,15 +4107,11 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
         if (asserted & ATTN_HARD_WIRED_MASK) {
                 if (asserted & ATTN_NIG_FOR_FUNC) {
-                        u32 nig_status_port;
-                        u32 nig_int_addr = port ?
-                                        NIG_REG_STATUS_INTERRUPT_PORT1 :
-                                        NIG_REG_STATUS_INTERRUPT_PORT0;
 
-                        bp->nig_mask = REG_RD(bp, nig_mask_addr);
-                        REG_WR(bp, nig_mask_addr, 0);
+                        /* save nig interrupt mask */
+                        bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
+                        REG_WR(bp, nig_int_mask_addr, 0);
 
-                        nig_status_port = REG_RD(bp, nig_int_addr);
                         bnx2x_link_update(bp);
 
                         /* handle unicore attn? */
@@ -3362,15 +4164,132 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
         /* now set back the mask */
         if (asserted & ATTN_NIG_FOR_FUNC)
-                REG_WR(bp, nig_mask_addr, bp->nig_mask);
+                REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
 }
 
-static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
+static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
 {
         int port = bp->port;
-        int index;
+        int reg_offset;
+        u32 val;
+
+        if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
+
+                reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+                                     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+
+                val = REG_RD(bp, reg_offset);
+                val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
+                REG_WR(bp, reg_offset, val);
+
+                BNX2X_ERR("SPIO5 hw attention\n");
+
+                switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+                case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+                        /* Fan failure attention */
+
+                        /* The PHY reset is controled by GPIO 1 */
+                        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                        /* Low power mode is controled by GPIO 2 */
+                        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+                                       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+                        /* mark the failure */
+                        bp->ext_phy_config &=
+                                        ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+                        bp->ext_phy_config |=
+                                        PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+                        SHMEM_WR(bp,
+                                 dev_info.port_hw_config[port].
+                                                        external_phy_config,
+                                 bp->ext_phy_config);
+                        /* log the failure */
+                        printk(KERN_ERR PFX "Fan Failure on Network"
+                               " Controller %s has caused the driver to"
+                               " shutdown the card to prevent permanent"
+                               " damage.  Please contact Dell Support for"
+                               " assistance\n", bp->dev->name);
+                        break;
+
+                default:
+                        break;
+                }
+        }
+}
+
+static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
+{
+        u32 val;
+
+        if (attn & BNX2X_DOORQ_ASSERT) {
+
+                val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
+                BNX2X_ERR("DB hw attention 0x%x\n", val);
+                /* DORQ discard attention */
+                if (val & 0x2)
+                        BNX2X_ERR("FATAL error from DORQ\n");
+        }
+}
+
+static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
+{
+        u32 val;
+
+        if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
+
+                val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
+                BNX2X_ERR("CFC hw attention 0x%x\n", val);
+                /* CFC error attention */
+                if (val & 0x2)
+                        BNX2X_ERR("FATAL error from CFC\n");
+        }
+
+        if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
+
+                val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
+                BNX2X_ERR("PXP hw attention 0x%x\n", val);
+                /* RQ_USDMDP_FIFO_OVERFLOW */
+                if (val & 0x18000)
+                        BNX2X_ERR("FATAL error from PXP\n");
+        }
+}
+
+static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
+{
+        if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
+
+                if (attn & BNX2X_MC_ASSERT_BITS) {
+
+                        BNX2X_ERR("MC assert!\n");
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
+                        bnx2x_panic();
+
+                } else if (attn & BNX2X_MCP_ASSERT) {
+
+                        BNX2X_ERR("MCP assert!\n");
+                        REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
+                        bnx2x_mc_assert(bp);
+
+                } else
+                        BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
+        }
+
+        if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
+
+                REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
+                BNX2X_ERR("LATCHED attention 0x%x (masked)\n", attn);
+        }
+}
+
+static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
+{
         struct attn_route attn;
         struct attn_route group_mask;
+        int port = bp->port;
+        int index;
         u32 reg_addr;
         u32 val;
 
@@ -3391,64 +4310,14 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
                         DP(NETIF_MSG_HW, "group[%d]: %llx\n", index,
                            (unsigned long long)group_mask.sig[0]);
 
-                        if (attn.sig[3] & group_mask.sig[3] &
-                            EVEREST_GEN_ATTN_IN_USE_MASK) {
-
-                                if (attn.sig[3] & BNX2X_MC_ASSERT_BITS) {
-
-                                        BNX2X_ERR("MC assert!\n");
-                                        bnx2x_panic();
-
-                                } else if (attn.sig[3] & BNX2X_MCP_ASSERT) {
-
-                                        BNX2X_ERR("MCP assert!\n");
-                                        REG_WR(bp,
-                                             MISC_REG_AEU_GENERAL_ATTN_11, 0);
-                                        bnx2x_mc_assert(bp);
-
-                                } else {
-                                        BNX2X_ERR("UNKOWEN HW ASSERT!\n");
-                                }
-                        }
-
-                        if (attn.sig[1] & group_mask.sig[1] &
-                            BNX2X_DOORQ_ASSERT) {
-
-                                val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
-                                BNX2X_ERR("DB hw attention 0x%x\n", val);
-                                /* DORQ discard attention */
-                                if (val & 0x2)
-                                        BNX2X_ERR("FATAL error from DORQ\n");
-                        }
-
-                        if (attn.sig[2] & group_mask.sig[2] &
-                            AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
-
-                                val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
-                                BNX2X_ERR("CFC hw attention 0x%x\n", val);
-                                /* CFC error attention */
-                                if (val & 0x2)
-                                        BNX2X_ERR("FATAL error from CFC\n");
-                        }
-
-                        if (attn.sig[2] & group_mask.sig[2] &
-                            AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
-
-                                val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
-                                BNX2X_ERR("PXP hw attention 0x%x\n", val);
-                                /* RQ_USDMDP_FIFO_OVERFLOW */
-                                if (val & 0x18000)
-                                        BNX2X_ERR("FATAL error from PXP\n");
-                        }
-
-                        if (attn.sig[3] & group_mask.sig[3] &
-                            EVEREST_LATCHED_ATTN_IN_USE_MASK) {
-
-                                REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL,
-                                       0x7ff);
-                                DP(NETIF_MSG_HW, "got latched bits 0x%x\n",
-                                   attn.sig[3]);
-                        }
+                        bnx2x_attn_int_deasserted3(bp,
+                                        attn.sig[3] & group_mask.sig[3]);
+                        bnx2x_attn_int_deasserted1(bp,
+                                        attn.sig[1] & group_mask.sig[1]);
+                        bnx2x_attn_int_deasserted2(bp,
+                                        attn.sig[2] & group_mask.sig[2]);
+                        bnx2x_attn_int_deasserted0(bp,
+                                        attn.sig[0] & group_mask.sig[0]);
 
                         if ((attn.sig[0] & group_mask.sig[0] &
                                                 HW_INTERRUT_ASSERT_SET_0) ||
@@ -3456,7 +4325,15 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
                                                 HW_INTERRUT_ASSERT_SET_1) ||
                             (attn.sig[2] & group_mask.sig[2] &
                                                 HW_INTERRUT_ASSERT_SET_2))
-                                BNX2X_ERR("FATAL HW block attention\n");
+                                BNX2X_ERR("FATAL HW block attention"
+                                          "  set0 0x%x  set1 0x%x"
+                                          "  set2 0x%x\n",
+                                          (attn.sig[0] & group_mask.sig[0] &
+                                           HW_INTERRUT_ASSERT_SET_0),
+                                          (attn.sig[1] & group_mask.sig[1] &
+                                           HW_INTERRUT_ASSERT_SET_1),
+                                          (attn.sig[2] & group_mask.sig[2] &
+                                           HW_INTERRUT_ASSERT_SET_2));
 
                         if ((attn.sig[0] & group_mask.sig[0] &
                                                 HW_PRTY_ASSERT_SET_0) ||
@@ -3464,7 +4341,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
                                                 HW_PRTY_ASSERT_SET_1) ||
                             (attn.sig[2] & group_mask.sig[2] &
                                                 HW_PRTY_ASSERT_SET_2))
-                                BNX2X_ERR("FATAL HW block parity atention\n");
+                               BNX2X_ERR("FATAL HW block parity attention\n");
                 }
         }
 
@@ -3529,7 +4406,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 
         /* Return here if interrupt is disabled */
         if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-                DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+                DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
                 return;
         }
 
@@ -3539,12 +4416,11 @@ static void bnx2x_sp_task(struct work_struct *work)
 
         DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status);
 
-        if (status & 0x1) {
-                /* HW attentions */
+        /* HW attentions */
+        if (status & 0x1)
                 bnx2x_attn_int(bp);
-        }
 
-        /* CStorm events: query_stats, cfc delete ramrods */
+        /* CStorm events: query_stats, port delete ramrod */
         if (status & 0x2)
                 bp->stat_pending = 0;
 
@@ -3558,6 +4434,7 @@ static void bnx2x_sp_task(struct work_struct *work)
                      IGU_INT_NOP, 1);
         bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, le16_to_cpu(bp->def_t_idx),
                      IGU_INT_ENABLE, 1);
+
 }
 
 static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
@@ -3567,11 +4444,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 
         /* Return here if interrupt is disabled */
         if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-                DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+                DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
                 return IRQ_HANDLED;
         }
 
-        bnx2x_ack_sb(bp, 16, XSTORM_ID, 0, IGU_INT_DISABLE, 0);
+        bnx2x_ack_sb(bp, DEF_SB_ID, XSTORM_ID, 0, IGU_INT_DISABLE, 0);
 
 #ifdef BNX2X_STOP_ON_ERROR
         if (unlikely(bp->panic))
@@ -3906,7 +4783,7 @@ static void bnx2x_stop_stats(struct bnx2x *bp)
 
                 while (bp->stats_state != STATS_STATE_DISABLE) {
                         if (!timeout) {
-                                BNX2X_ERR("timeout wating for stats stop\n");
+                                BNX2X_ERR("timeout waiting for stats stop\n");
                                 break;
                         }
                         timeout--;
@@ -4173,39 +5050,37 @@ static void bnx2x_update_net_stats(struct bnx2x *bp)
 
         nstats->rx_bytes = bnx2x_hilo(&estats->total_bytes_received_hi);
 
-        nstats->tx_bytes =
-                bnx2x_hilo(&estats->total_bytes_transmitted_hi);
+        nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi);
 
-        nstats->rx_dropped = estats->checksum_discard +
-                                   estats->mac_discard;
+        nstats->rx_dropped = estats->checksum_discard + estats->mac_discard;
         nstats->tx_dropped = 0;
 
         nstats->multicast =
                 bnx2x_hilo(&estats->total_multicast_packets_transmitted_hi);
 
-        nstats->collisions =
-                estats->single_collision_transmit_frames +
-                estats->multiple_collision_transmit_frames +
-                estats->late_collision_frames +
-                estats->excessive_collision_frames;
+        nstats->collisions = estats->single_collision_transmit_frames +
+                             estats->multiple_collision_transmit_frames +
+                             estats->late_collision_frames +
+                             estats->excessive_collision_frames;
 
         nstats->rx_length_errors = estats->runt_packets_received +
                                    estats->jabber_packets_received;
-        nstats->rx_over_errors = estats->no_buff_discard;
+        nstats->rx_over_errors = estats->brb_discard +
+                                 estats->brb_truncate_discard;
         nstats->rx_crc_errors = estats->crc_receive_errors;
         nstats->rx_frame_errors = estats->alignment_errors;
-        nstats->rx_fifo_errors = estats->brb_discard +
-                                       estats->brb_truncate_discard;
+        nstats->rx_fifo_errors = estats->no_buff_discard;
         nstats->rx_missed_errors = estats->xxoverflow_discard;
 
         nstats->rx_errors = nstats->rx_length_errors +
                             nstats->rx_over_errors +
                             nstats->rx_crc_errors +
                             nstats->rx_frame_errors +
-                            nstats->rx_fifo_errors;
+                            nstats->rx_fifo_errors +
+                            nstats->rx_missed_errors;
 
         nstats->tx_aborted_errors = estats->late_collision_frames +
-                                          estats->excessive_collision_frames;
+                                    estats->excessive_collision_frames;
         nstats->tx_carrier_errors = estats->false_carrier_detections;
         nstats->tx_fifo_errors = 0;
         nstats->tx_heartbeat_errors = 0;
@@ -4334,7 +5209,7 @@ static void bnx2x_timer(unsigned long data)
                 return;
 
         if (atomic_read(&bp->intr_sem) != 0)
-                goto bnx2x_restart_timer;
+                goto timer_restart;
 
         if (poll) {
                 struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -4344,7 +5219,7 @@ static void bnx2x_timer(unsigned long data)
                 rc = bnx2x_rx_int(fp, 1000);
         }
 
-        if (!nomcp && (bp->bc_ver >= 0x040003)) {
+        if (!nomcp) {
                 int port = bp->port;
                 u32 drv_pulse;
                 u32 mcp_pulse;
@@ -4353,9 +5228,9 @@ static void bnx2x_timer(unsigned long data)
                 bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
                 /* TBD - add SYSTEM_TIME */
                 drv_pulse = bp->fw_drv_pulse_wr_seq;
-                SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse);
+                SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse);
 
-                mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) &
+                mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) &
                              MCP_PULSE_SEQ_MASK);
                 /* The delta between driver pulse and mcp response
                  * should be 1 (before mcp response) or 0 (after mcp response)
@@ -4369,11 +5244,11 @@ static void bnx2x_timer(unsigned long data)
         }
 
         if (bp->stats_state == STATS_STATE_DISABLE)
-                goto bnx2x_restart_timer;
+                goto timer_restart;
 
         bnx2x_update_stats(bp);
 
-bnx2x_restart_timer:
+timer_restart:
         mod_timer(&bp->timer, jiffies + bp->current_interval);
 }
 
@@ -4438,6 +5313,9 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             atten_status_block);
         def_sb->atten_status_block.status_block_id = id;
 
+        bp->def_att_idx = 0;
+        bp->attn_state = 0;
+
         reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
                              MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
 
@@ -4472,6 +5350,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             u_def_status_block);
         def_sb->u_def_status_block.status_block_id = id;
 
+        bp->def_u_idx = 0;
+
         REG_WR(bp, BAR_USTRORM_INTMEM +
                USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_USTRORM_INTMEM +
@@ -4489,6 +5369,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             c_def_status_block);
         def_sb->c_def_status_block.status_block_id = id;
 
+        bp->def_c_idx = 0;
+
         REG_WR(bp, BAR_CSTRORM_INTMEM +
                CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_CSTRORM_INTMEM +
@@ -4506,6 +5388,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             t_def_status_block);
         def_sb->t_def_status_block.status_block_id = id;
 
+        bp->def_t_idx = 0;
+
         REG_WR(bp, BAR_TSTRORM_INTMEM +
                TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_TSTRORM_INTMEM +
@@ -4523,6 +5407,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                                             x_def_status_block);
         def_sb->x_def_status_block.status_block_id = id;
 
+        bp->def_x_idx = 0;
+
         REG_WR(bp, BAR_XSTRORM_INTMEM +
                XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
         REG_WR(bp, BAR_XSTRORM_INTMEM +
@@ -4535,6 +5421,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
                 REG_WR16(bp, BAR_XSTRORM_INTMEM +
                          XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1);
 
+        bp->stat_pending = 0;
+
         bnx2x_ack_sb(bp, id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 }
 
@@ -4626,7 +5514,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
                 fp->rx_bd_prod = fp->rx_comp_prod = ring_prod;
                 fp->rx_pkt = fp->rx_calls = 0;
 
-                /* Warning! this will genrate an interrupt (to the TSTORM) */
+                /* Warning! this will generate an interrupt (to the TSTORM) */
                 /* must only be done when chip is initialized */
                 REG_WR(bp, BAR_TSTRORM_INTMEM +
                        TSTORM_RCQ_PROD_OFFSET(port, j), ring_prod);
@@ -4678,7 +5566,6 @@ static void bnx2x_init_sp_ring(struct bnx2x *bp)
 
         bp->spq_left = MAX_SPQ_PENDING;
         bp->spq_prod_idx = 0;
-        bp->dsb_sp_prod_idx = 0;
         bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
         bp->spq_prod_bd = bp->spq;
         bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
@@ -4755,6 +5642,42 @@ static void bnx2x_init_ind_table(struct bnx2x *bp)
         REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
 }
 
+static void bnx2x_set_client_config(struct bnx2x *bp)
+{
+#ifdef BCM_VLAN
+        int mode = bp->rx_mode;
+#endif
+        int i, port = bp->port;
+        struct tstorm_eth_client_config tstorm_client = {0};
+
+        tstorm_client.mtu = bp->dev->mtu;
+        tstorm_client.statistics_counter_id = 0;
+        tstorm_client.config_flags =
+                                TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
+#ifdef BCM_VLAN
+        if (mode && bp->vlgrp) {
+                tstorm_client.config_flags |=
+                                TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
+                DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
+        }
+#endif
+        if (mode != BNX2X_RX_MODE_PROMISC)
+                tstorm_client.drop_flags =
+                                TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR;
+
+        for_each_queue(bp, i) {
+                REG_WR(bp, BAR_TSTRORM_INTMEM +
+                       TSTORM_CLIENT_CONFIG_OFFSET(port, i),
+                       ((u32 *)&tstorm_client)[0]);
+                REG_WR(bp, BAR_TSTRORM_INTMEM +
+                       TSTORM_CLIENT_CONFIG_OFFSET(port, i) + 4,
+                       ((u32 *)&tstorm_client)[1]);
+        }
+
+/*      DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n",
+           ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */
+}
+
 static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 {
         int mode = bp->rx_mode;
@@ -4794,41 +5717,9 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 /*              DP(NETIF_MSG_IFUP, "tstorm_mac_filter[%d]: 0x%08x\n", i,
                    ((u32 *)&tstorm_mac_filter)[i]); */
         }
-}
 
-static void bnx2x_set_client_config(struct bnx2x *bp, int client_id)
-{
-#ifdef BCM_VLAN
-        int mode = bp->rx_mode;
-#endif
-        int port = bp->port;
-        struct tstorm_eth_client_config tstorm_client = {0};
-
-        tstorm_client.mtu = bp->dev->mtu;
-        tstorm_client.statistics_counter_id = 0;
-        tstorm_client.config_flags =
-                TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
-#ifdef BCM_VLAN
-        if (mode && bp->vlgrp) {
-                tstorm_client.config_flags |=
-                                TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
-                DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
-        }
-#endif
-        tstorm_client.drop_flags = (TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR |
-                                    TSTORM_ETH_CLIENT_CONFIG_DROP_TCP_CS_ERR |
-                                    TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR |
-                                    TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR);
-
-        REG_WR(bp, BAR_TSTRORM_INTMEM +
-               TSTORM_CLIENT_CONFIG_OFFSET(port, client_id),
-               ((u32 *)&tstorm_client)[0]);
-        REG_WR(bp, BAR_TSTRORM_INTMEM +
-               TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) + 4,
-               ((u32 *)&tstorm_client)[1]);
-
-/*      DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n",
-           ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */
+        if (mode != BNX2X_RX_MODE_NONE)
+                bnx2x_set_client_config(bp);
 }
 
 static void bnx2x_init_internal(struct bnx2x *bp)
@@ -4836,7 +5727,6 @@ static void bnx2x_init_internal(struct bnx2x *bp)
         int port = bp->port;
         struct tstorm_eth_function_common_config tstorm_config = {0};
         struct stats_indication_flags stats_flags = {0};
-        int i;
 
         if (is_multi(bp)) {
                 tstorm_config.config_flags = MULTI_FLAGS;
@@ -4850,13 +5740,9 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 /*      DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n",
            (*(u32 *)&tstorm_config)); */
 
-        bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx untill link is up */
+        bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
         bnx2x_set_storm_rx_mode(bp);
 
-        for_each_queue(bp, i)
-                bnx2x_set_client_config(bp, i);
-
-
         stats_flags.collect_eth = cpu_to_le32(1);
 
         REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port),
@@ -4902,7 +5788,7 @@ static void bnx2x_nic_init(struct bnx2x *bp)
         bnx2x_init_internal(bp);
         bnx2x_init_stats(bp);
         bnx2x_init_ind_table(bp);
-        bnx2x_enable_int(bp);
+        bnx2x_int_enable(bp);
 
 }
 
@@ -5265,8 +6151,10 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
         if (mode & 0x1) {       /* init common */
                 DP(BNX2X_MSG_MCP, "starting common init  func %d  mode %x\n",
                    func, mode);
-                REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff);
-                REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc);
+                REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+                       0xffffffff);
+                REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+                       0xfffc);
                 bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
 
                 REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100);
@@ -5359,7 +6247,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 REG_RD(bp, USEM_REG_PASSIVE_BUFFER + 8);
 #endif
                 bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
-                /* softrest pulse */
+                /* soft reset pulse */
                 REG_WR(bp, QM_REG_SOFT_RESET, 1);
                 REG_WR(bp, QM_REG_SOFT_RESET, 0);
 
@@ -5413,7 +6301,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 REG_WR(bp, SRC_REG_SOFT_RST, 1);
                 for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
                         REG_WR(bp, i, 0xc0cac01a);
-                        /* TODO: repleace with something meaningfull */
+                        /* TODO: replace with something meaningful */
                 }
                 /* SRCH COMMON comes here */
                 REG_WR(bp, SRC_REG_SOFT_RST, 0);
@@ -5486,6 +6374,28 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 enable_blocks_attention(bp);
                 /* enable_blocks_parity(bp); */
 
+                switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+                case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+                        /* Fan failure is indicated by SPIO 5 */
+                        bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+                                       MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+                        /* set to active low mode */
+                        val = REG_RD(bp, MISC_REG_SPIO_INT);
+                        val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+                                        MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+                        REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+                        /* enable interrupt to signal the IGU */
+                        val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+                        val |= (1 << MISC_REGISTERS_SPIO_5);
+                        REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+                        break;
+
+                default:
+                        break;
+                }
+
         } /* end of common init */
 
         /* per port init */
@@ -5645,9 +6555,21 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
         /* Port MCP comes here */
         /* Port DMAE comes here */
 
+        switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+        case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+                /* add SPIO 5 to group 0 */
+                val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+                val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+                REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val);
+                break;
+
+        default:
+                break;
+        }
+
         bnx2x_link_reset(bp);
 
-        /* Reset pciex errors for debug */
+        /* Reset PCIE errors for debug */
         REG_WR(bp, 0x2114, 0xffffffff);
         REG_WR(bp, 0x2120, 0xffffffff);
         REG_WR(bp, 0x2814, 0xffffffff);
@@ -5669,9 +6591,9 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
                 port = bp->port;
 
                 bp->fw_drv_pulse_wr_seq =
-                                (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) &
+                                (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) &
                                  DRV_PULSE_SEQ_MASK);
-                bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param);
+                bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param);
                 DP(BNX2X_MSG_MCP, "drv_pulse 0x%x  fw_mb 0x%x\n",
                    bp->fw_drv_pulse_wr_seq, bp->fw_mb);
         } else {
@@ -5681,16 +6603,15 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
         return 0;
 }
 
-
-/* send the MCP a request, block untill there is a reply */
+/* send the MCP a request, block until there is a reply */
 static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
 {
-        u32 rc = 0;
-        u32 seq = ++bp->fw_seq;
         int port = bp->port;
+        u32 seq = ++bp->fw_seq;
+        u32 rc = 0;
 
-        SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq);
-        DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq);
+        SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq));
+        DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
         /* let the FW do it's magic ... */
         msleep(100); /* TBD */
@@ -5698,19 +6619,20 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
         if (CHIP_REV_IS_SLOW(bp))
                 msleep(900);
 
-        rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header);
-
+        rc = SHMEM_RD(bp, func_mb[port].fw_mb_header);
         DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
 
         /* is this a reply to our command? */
         if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
                 rc &= FW_MSG_CODE_MASK;
+
         } else {
                 /* FW BUG! */
                 BNX2X_ERR("FW failed to respond!\n");
                 bnx2x_fw_dump(bp);
                 rc = 0;
         }
+
         return rc;
 }
 
@@ -5869,7 +6791,7 @@ static int bnx2x_alloc_mem(struct bnx2x *bp)
         for (i = 0; i < 16*1024; i += 64)
                 * (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
 
-        /* now sixup the last line in the block to point to the next block */
+        /* now fixup the last line in the block to point to the next block */
         *(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping;
 
         /* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */
@@ -5950,22 +6872,19 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp)
         int i;
 
         free_irq(bp->msix_table[0].vector, bp->dev);
-        DP(NETIF_MSG_IFDOWN, "rleased sp irq (%d)\n",
+        DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
            bp->msix_table[0].vector);
 
         for_each_queue(bp, i) {
-                DP(NETIF_MSG_IFDOWN, "about to rlease fp #%d->%d irq  "
+                DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq  "
                    "state(%x)\n", i, bp->msix_table[i + 1].vector,
                    bnx2x_fp(bp, i, state));
 
-                if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) {
-
-                        free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]);
-                        bnx2x_fp(bp, i, state) = BNX2X_FP_STATE_CLOSED;
-
-                } else
-                        DP(NETIF_MSG_IFDOWN, "irq not freed\n");
+                if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED)
+                        BNX2X_ERR("IRQ of fp #%d being freed while "
+                                  "state != closed\n", i);
 
+                free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]);
         }
 
 }
@@ -5995,7 +6914,7 @@ static int bnx2x_enable_msix(struct bnx2x *bp)
 
         if (pci_enable_msix(bp->pdev, &bp->msix_table[0],
                                      bp->num_queues + 1)){
-                BNX2X_ERR("failed to enable msix\n");
+                BNX2X_LOG("failed to enable MSI-X\n");
                 return -1;
 
         }
@@ -6010,11 +6929,8 @@ static int bnx2x_enable_msix(struct bnx2x *bp)
 static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 {
 
-
         int i, rc;
 
-        DP(NETIF_MSG_IFUP, "about to request sp irq\n");
-
         rc = request_irq(bp->msix_table[0].vector, bnx2x_msix_sp_int, 0,
                          bp->dev->name, bp->dev);
 
@@ -6029,7 +6945,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
                                  bp->dev->name, &bp->fp[i]);
 
                 if (rc) {
-                        BNX2X_ERR("request fp #%d irq failed\n", i);
+                        BNX2X_ERR("request fp #%d irq failed  "
+                                  "rc %d\n", i, rc);
                         bnx2x_free_msix_irqs(bp);
                         return -EBUSY;
                 }
@@ -6109,8 +7026,8 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
         /* can take a while if any port is running */
         int timeout = 500;
 
-        /* DP("waiting for state to become %d on IDX [%d]\n",
-        state, sb_idx); */
+        DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n",
+           poll ? "polling" : "waiting", state, idx);
 
         might_sleep();
 
@@ -6128,7 +7045,7 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
 
                 mb(); /* state is changed by bnx2x_sp_event()*/
 
-                if (*state_p != state)
+                if (*state_p == state)
                         return 0;
 
                 timeout--;
@@ -6136,17 +7053,17 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
 
         }
 
-
         /* timeout! */
-        BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx);
-        return -EBUSY;
+        BNX2X_ERR("timeout %s for state %x on IDX [%d]\n",
+                  poll ? "polling" : "waiting", state, idx);
 
+        return -EBUSY;
 }
 
 static int bnx2x_setup_leading(struct bnx2x *bp)
 {
 
-        /* reset IGU staae */
+        /* reset IGU state */
         bnx2x_ack_sb(bp, DEF_SB_ID, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 
         /* SETUP ramrod */
@@ -6162,12 +7079,13 @@ static int bnx2x_setup_multi(struct bnx2x *bp, int index)
         /* reset IGU state */
         bnx2x_ack_sb(bp, index, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 
+        /* SETUP ramrod */
         bp->fp[index].state = BNX2X_FP_STATE_OPENING;
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0, index, 0);
 
         /* Wait for completion */
         return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_OPEN, index,
-                                 &(bp->fp[index].state), 1);
+                                 &(bp->fp[index].state), 0);
 
 }
 
@@ -6177,8 +7095,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev);
 
 static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
 {
-        int rc;
-        int i = 0;
+        u32 load_code;
+        int i;
 
         bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
@@ -6188,26 +7106,28 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
            initialized, otherwise - not.
         */
         if (!nomcp) {
-                rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
-                if (rc == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+                if (!load_code) {
+                        BNX2X_ERR("MCP response failure, unloading\n");
+                        return -EBUSY;
+                }
+                if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+                        BNX2X_ERR("MCP refused load request, unloading\n");
                         return -EBUSY; /* other port in diagnostic mode */
                 }
         } else {
-                rc = FW_MSG_CODE_DRV_LOAD_COMMON;
+                load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
         }
 
-        DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues);
-
         /* if we can't use msix we only need one fp,
          * so try to enable msix with the requested number of fp's
          * and fallback to inta with one fp
          */
         if (req_irq) {
-
                 if (use_inta) {
                         bp->num_queues = 1;
                 } else {
-                        if (use_multi > 1 && use_multi <= 16)
+                        if ((use_multi > 1) && (use_multi <= 16))
                                 /* user requested number */
                                 bp->num_queues = use_multi;
                         else if (use_multi == 1)
@@ -6216,15 +7136,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
                                 bp->num_queues = 1;
 
                         if (bnx2x_enable_msix(bp)) {
-                                /* faild to enable msix */
+                                /* failed to enable msix */
                                 bp->num_queues = 1;
                                 if (use_multi)
-                                        BNX2X_ERR("Muti requested but failed"
+                                        BNX2X_ERR("Multi requested but failed"
                                                   " to enable MSI-X\n");
                         }
                 }
         }
 
+        DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues);
+
         if (bnx2x_alloc_mem(bp))
                 return -ENOMEM;
 
@@ -6232,13 +7154,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
                 if (bp->flags & USING_MSIX_FLAG) {
                         if (bnx2x_req_msix_irqs(bp)) {
                                 pci_disable_msix(bp->pdev);
-                                goto out_error;
+                                goto load_error;
                         }
 
                 } else {
                         if (bnx2x_req_irq(bp)) {
                                 BNX2X_ERR("IRQ request failed, aborting\n");
-                                goto out_error;
+                                goto load_error;
                         }
                 }
         }
@@ -6249,31 +7171,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
 
 
         /* Initialize HW */
-        if (bnx2x_function_init(bp, (rc == FW_MSG_CODE_DRV_LOAD_COMMON))) {
+        if (bnx2x_function_init(bp,
+                                (load_code == FW_MSG_CODE_DRV_LOAD_COMMON))) {
                 BNX2X_ERR("HW init failed, aborting\n");
-                goto out_error;
+                goto load_error;
         }
 
 
         atomic_set(&bp->intr_sem, 0);
 
-        /* Reenable SP tasklet */
-        /*if (bp->sp_task_en) {                */
-        /*        tasklet_enable(&bp->sp_task);*/
-        /*} else {                             */
-        /*        bp->sp_task_en = 1;          */
-        /*}                                    */
 
         /* Setup NIC internals and enable interrupts */
         bnx2x_nic_init(bp);
 
         /* Send LOAD_DONE command to MCP */
         if (!nomcp) {
-                rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
-                DP(NETIF_MSG_IFUP, "rc = 0x%x\n", rc);
-                if (!rc) {
+                load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
+                if (!load_code) {
                         BNX2X_ERR("MCP response failure, unloading\n");
-                        goto int_disable;
+                        goto load_int_disable;
                 }
         }
 
@@ -6285,11 +7201,11 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
                 napi_enable(&bnx2x_fp(bp, i, napi));
 
         if (bnx2x_setup_leading(bp))
-                goto stop_netif;
+                goto load_stop_netif;
 
         for_each_nondefault_queue(bp, i)
                 if (bnx2x_setup_multi(bp, i))
-                        goto stop_netif;
+                        goto load_stop_netif;
 
         bnx2x_set_mac_addr(bp);
 
@@ -6313,42 +7229,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
 
         return 0;
 
-stop_netif:
+load_stop_netif:
         for_each_queue(bp, i)
                 napi_disable(&bnx2x_fp(bp, i, napi));
 
-int_disable:
-        bnx2x_disable_int_sync(bp);
+load_int_disable:
+        bnx2x_int_disable_sync(bp);
 
         bnx2x_free_skbs(bp);
         bnx2x_free_irq(bp);
 
-out_error:
+load_error:
         bnx2x_free_mem(bp);
 
         /* TBD we really need to reset the chip
            if we want to recover from this */
-        return rc;
+        return -EBUSY;
 }
 
-static void bnx2x_netif_stop(struct bnx2x *bp)
-{
-        int i;
-
-        bp->rx_mode = BNX2X_RX_MODE_NONE;
-        bnx2x_set_storm_rx_mode(bp);
-
-        bnx2x_disable_int_sync(bp);
-        bnx2x_link_reset(bp);
-
-        for_each_queue(bp, i)
-                napi_disable(&bnx2x_fp(bp, i, napi));
-
-        if (netif_running(bp->dev)) {
-                netif_tx_disable(bp->dev);
-                bp->dev->trans_start = jiffies; /* prevent tx timeout */
-        }
-}
 
 static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 {
@@ -6401,20 +7299,20 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 
         int rc;
 
-        /* halt the connnection */
+        /* halt the connection */
         bp->fp[index].state = BNX2X_FP_STATE_HALTING;
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0);
 
 
         rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index,
                                        &(bp->fp[index].state), 1);
-        if (rc) /* timout */
+        if (rc) /* timeout */
                 return rc;
 
         /* delete cfc entry */
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1);
 
-        return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_DELETED, index,
+        return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_CLOSED, index,
                                  &(bp->fp[index].state), 1);
 
 }
@@ -6422,8 +7320,8 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 
 static void bnx2x_stop_leading(struct bnx2x *bp)
 {
-
-        /* if the other port is hadling traffic,
+        u16 dsb_sp_prod_idx;
+        /* if the other port is handling traffic,
            this can take a lot of time */
         int timeout = 500;
 
@@ -6437,52 +7335,71 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
                                &(bp->fp[0].state), 1))
                 return;
 
-        bp->dsb_sp_prod_idx = *bp->dsb_sp_prod;
+        dsb_sp_prod_idx = *bp->dsb_sp_prod;
 
-        /* Send CFC_DELETE ramrod */
+        /* Send PORT_DELETE ramrod */
         bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1);
 
-        /*
-           Wait for completion.
+        /* Wait for completion to arrive on default status block
            we are going to reset the chip anyway
            so there is not much to do if this times out
          */
-        while (bp->dsb_sp_prod_idx == *bp->dsb_sp_prod && timeout) {
-                        timeout--;
-                        msleep(1);
+        while ((dsb_sp_prod_idx == *bp->dsb_sp_prod) && timeout) {
+                timeout--;
+                msleep(1);
         }
-
+        if (!timeout) {
+                DP(NETIF_MSG_IFDOWN, "timeout polling for completion "
+                   "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
+                   *bp->dsb_sp_prod, dsb_sp_prod_idx);
+        }
+        bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
+        bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
 }
 
-static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq)
+
+static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq)
 {
         u32 reset_code = 0;
-        int rc;
-        int i;
+        int i, timeout;
 
         bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
-        /* Calling flush_scheduled_work() may deadlock because
-         * linkwatch_event() may be on the workqueue and it will try to get
-         * the rtnl_lock which we are holding.
-         */
+        del_timer_sync(&bp->timer);
 
-        while (bp->in_reset_task)
-                msleep(1);
+        bp->rx_mode = BNX2X_RX_MODE_NONE;
+        bnx2x_set_storm_rx_mode(bp);
 
-        /* Delete the timer: do it before disabling interrupts, as it
-           may be stil STAT_QUERY ramrod pending after stopping the timer */
-        del_timer_sync(&bp->timer);
+        if (netif_running(bp->dev)) {
+                netif_tx_disable(bp->dev);
+                bp->dev->trans_start = jiffies; /* prevent tx timeout */
+        }
+
+        /* Wait until all fast path tasks complete */
+        for_each_queue(bp, i) {
+                struct bnx2x_fastpath *fp = &bp->fp[i];
+
+                timeout = 1000;
+                while (bnx2x_has_work(fp) && (timeout--))
+                        msleep(1);
+                if (!timeout)
+                        BNX2X_ERR("timeout waiting for queue[%d]\n", i);
+        }
 
         /* Wait until stat ramrod returns and all SP tasks complete */
-        while (bp->stat_pending && (bp->spq_left != MAX_SPQ_PENDING))
+        timeout = 1000;
+        while ((bp->stat_pending || (bp->spq_left != MAX_SPQ_PENDING)) &&
+               (timeout--))
                 msleep(1);
 
-        /* Stop fast path, disable MAC, disable interrupts, disable napi */
-        bnx2x_netif_stop(bp);
+        for_each_queue(bp, i)
+                napi_disable(&bnx2x_fp(bp, i, napi));
+        /* Disable interrupts after Tx and Rx are disabled on stack level */
+        bnx2x_int_disable_sync(bp);
 
         if (bp->flags & NO_WOL_FLAG)
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+
         else if (bp->wol) {
                 u32 emac_base = bp->port ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
                 u8 *mac_addr = bp->dev->dev_addr;
@@ -6499,28 +7416,37 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq)
                 EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
 
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
+
         } else
                 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 
+        /* Close multi and leading connections */
         for_each_nondefault_queue(bp, i)
                 if (bnx2x_stop_multi(bp, i))
-                        goto error;
-
+                        goto unload_error;
 
         bnx2x_stop_leading(bp);
+        if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) ||
+            (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) {
+                DP(NETIF_MSG_IFDOWN, "failed to close leading properly!"
+                   "state 0x%x  fp[0].state 0x%x",
+                   bp->state, bp->fp[0].state);
+        }
+
+unload_error:
+        bnx2x_link_reset(bp);
 
-error:
         if (!nomcp)
-                rc = bnx2x_fw_command(bp, reset_code);
+                reset_code = bnx2x_fw_command(bp, reset_code);
         else
-                rc = FW_MSG_CODE_DRV_UNLOAD_COMMON;
+                reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
 
         /* Release IRQs */
-        if (fre_irq)
+        if (free_irq)
                 bnx2x_free_irq(bp);
 
         /* Reset the chip */
-        bnx2x_reset_chip(bp, rc);
+        bnx2x_reset_chip(bp, reset_code);
 
         /* Report UNLOAD_DONE to MCP */
         if (!nomcp)
@@ -6531,8 +7457,7 @@ error:
         bnx2x_free_mem(bp);
 
         bp->state = BNX2X_STATE_CLOSED;
-        /* Set link down */
-        bp->link_up = 0;
+
         netif_carrier_off(bp->dev);
 
         return 0;
@@ -6568,7 +7493,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                                           SUPPORTED_100baseT_Half |
                                           SUPPORTED_100baseT_Full |
                                           SUPPORTED_1000baseT_Full |
-                                          SUPPORTED_2500baseT_Full |
+                                          SUPPORTED_2500baseX_Full |
                                           SUPPORTED_TP | SUPPORTED_FIBRE |
                                           SUPPORTED_Autoneg |
                                           SUPPORTED_Pause |
@@ -6581,10 +7506,10 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
 
                         bp->phy_flags |= PHY_SGMII_FLAG;
 
-                        bp->supported |= (/* SUPPORTED_10baseT_Half |
-                                             SUPPORTED_10baseT_Full |
-                                             SUPPORTED_100baseT_Half |
-                                             SUPPORTED_100baseT_Full |*/
+                        bp->supported |= (SUPPORTED_10baseT_Half |
+                                          SUPPORTED_10baseT_Full |
+                                          SUPPORTED_100baseT_Half |
+                                          SUPPORTED_100baseT_Full |
                                           SUPPORTED_1000baseT_Full |
                                           SUPPORTED_TP | SUPPORTED_FIBRE |
                                           SUPPORTED_Autoneg |
@@ -6620,7 +7545,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                                           SUPPORTED_100baseT_Half |
                                           SUPPORTED_100baseT_Full |
                                           SUPPORTED_1000baseT_Full |
-                                          SUPPORTED_2500baseT_Full |
+                                          SUPPORTED_2500baseX_Full |
                                           SUPPORTED_10000baseT_Full |
                                           SUPPORTED_TP | SUPPORTED_FIBRE |
                                           SUPPORTED_Autoneg |
@@ -6629,12 +7554,46 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                         break;
 
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
+                                        ext_phy_type);
+
+                        bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_FIBRE |
+                                          SUPPORTED_Pause |
+                                          SUPPORTED_Asym_Pause);
+                        break;
+
                 case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
-                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n",
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
+                                       ext_phy_type);
+
+                        bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_1000baseT_Full |
+                                          SUPPORTED_Autoneg |
+                                          SUPPORTED_FIBRE |
+                                          SUPPORTED_Pause |
+                                          SUPPORTED_Asym_Pause);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
                                        ext_phy_type);
 
                         bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_1000baseT_Full |
                                           SUPPORTED_FIBRE |
+                                          SUPPORTED_Autoneg |
+                                          SUPPORTED_Pause |
+                                          SUPPORTED_Asym_Pause);
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
+                                       ext_phy_type);
+
+                        bp->supported |= (SUPPORTED_10000baseT_Full |
+                                          SUPPORTED_TP |
+                                          SUPPORTED_Autoneg |
                                           SUPPORTED_Pause |
                                           SUPPORTED_Asym_Pause);
                         break;
@@ -6691,7 +7650,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
                                    SUPPORTED_1000baseT_Full);
 
         if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
-                bp->supported &= ~SUPPORTED_2500baseT_Full;
+                bp->supported &= ~SUPPORTED_2500baseX_Full;
 
         if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
                 bp->supported &= ~SUPPORTED_10000baseT_Full;
@@ -6711,13 +7670,8 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                         bp->req_line_speed = 0;
                         bp->advertising = bp->supported;
                 } else {
-                        u32 ext_phy_type;
-
-                        ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
-                        if ((ext_phy_type ==
-                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
-                            (ext_phy_type ==
-                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
+                        if (XGXS_EXT_PHY_TYPE(bp) ==
+                                PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) {
                                 /* force 10G, no AN */
                                 bp->req_line_speed = SPEED_10000;
                                 bp->advertising =
@@ -6734,8 +7688,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_10M_FULL:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
+                if (bp->supported & SUPPORTED_10baseT_Full) {
                         bp->req_line_speed = SPEED_10;
                         bp->advertising = (ADVERTISED_10baseT_Full |
                                            ADVERTISED_TP);
@@ -6749,8 +7702,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_10M_HALF:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+                if (bp->supported & SUPPORTED_10baseT_Half) {
                         bp->req_line_speed = SPEED_10;
                         bp->req_duplex = DUPLEX_HALF;
                         bp->advertising = (ADVERTISED_10baseT_Half |
@@ -6765,8 +7717,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_100M_FULL:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+                if (bp->supported & SUPPORTED_100baseT_Full) {
                         bp->req_line_speed = SPEED_100;
                         bp->advertising = (ADVERTISED_100baseT_Full |
                                            ADVERTISED_TP);
@@ -6780,8 +7731,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_100M_HALF:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+                if (bp->supported & SUPPORTED_100baseT_Half) {
                         bp->req_line_speed = SPEED_100;
                         bp->req_duplex = DUPLEX_HALF;
                         bp->advertising = (ADVERTISED_100baseT_Half |
@@ -6796,8 +7746,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_1G:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) {
+                if (bp->supported & SUPPORTED_1000baseT_Full) {
                         bp->req_line_speed = SPEED_1000;
                         bp->advertising = (ADVERTISED_1000baseT_Full |
                                            ADVERTISED_TP);
@@ -6811,10 +7760,9 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
                 break;
 
         case PORT_FEATURE_LINK_SPEED_2_5G:
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) {
+                if (bp->supported & SUPPORTED_2500baseX_Full) {
                         bp->req_line_speed = SPEED_2500;
-                        bp->advertising = (ADVERTISED_2500baseT_Full |
+                        bp->advertising = (ADVERTISED_2500baseX_Full |
                                            ADVERTISED_TP);
                 } else {
                         BNX2X_ERR("NVRAM config error. "
@@ -6828,15 +7776,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
         case PORT_FEATURE_LINK_SPEED_10G_CX4:
         case PORT_FEATURE_LINK_SPEED_10G_KX4:
         case PORT_FEATURE_LINK_SPEED_10G_KR:
-                if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
-                        BNX2X_ERR("NVRAM config error. "
-                                  "Invalid link_config 0x%x"
-                                  "  phy_flags 0x%x\n",
-                                  bp->link_config, bp->phy_flags);
-                        return;
-                }
-                if (bp->speed_cap_mask &
-                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+                if (bp->supported & SUPPORTED_10000baseT_Full) {
                         bp->req_line_speed = SPEED_10000;
                         bp->advertising = (ADVERTISED_10000baseT_Full |
                                            ADVERTISED_FIBRE);
@@ -6863,43 +7803,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
 
         bp->req_flow_ctrl = (bp->link_config &
                              PORT_FEATURE_FLOW_CONTROL_MASK);
-        /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */
-        switch (bp->req_flow_ctrl) {
-        case FLOW_CTRL_AUTO:
+        if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+            (bp->supported & SUPPORTED_Autoneg))
                 bp->req_autoneg |= AUTONEG_FLOW_CTRL;
-                if (bp->dev->mtu <= 4500) {
-                        bp->pause_mode = PAUSE_BOTH;
-                        bp->advertising |= (ADVERTISED_Pause |
-                                            ADVERTISED_Asym_Pause);
-                } else {
-                        bp->pause_mode = PAUSE_ASYMMETRIC;
-                        bp->advertising |= ADVERTISED_Asym_Pause;
-                }
-                break;
-
-        case FLOW_CTRL_TX:
-                bp->pause_mode = PAUSE_ASYMMETRIC;
-                bp->advertising |= ADVERTISED_Asym_Pause;
-                break;
-
-        case FLOW_CTRL_RX:
-        case FLOW_CTRL_BOTH:
-                bp->pause_mode = PAUSE_BOTH;
-                bp->advertising |= (ADVERTISED_Pause |
-                                    ADVERTISED_Asym_Pause);
-                break;
 
-        case FLOW_CTRL_NONE:
-        default:
-                bp->pause_mode = PAUSE_NONE;
-                bp->advertising &= ~(ADVERTISED_Pause |
-                                     ADVERTISED_Asym_Pause);
-                break;
-        }
-        BNX2X_DEV_INFO("req_autoneg 0x%x  req_flow_ctrl 0x%x\n"
-             KERN_INFO "  pause_mode %d  advertising 0x%x\n",
-                       bp->req_autoneg, bp->req_flow_ctrl,
-                       bp->pause_mode, bp->advertising);
+        BNX2X_DEV_INFO("req_autoneg 0x%x  req_flow_ctrl 0x%x"
+                       "  advertising 0x%x\n",
+                       bp->req_autoneg, bp->req_flow_ctrl, bp->advertising);
 }
 
 static void bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -6933,15 +7843,15 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
         val = SHMEM_RD(bp, validity_map[port]);
         if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
                 != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
-                BNX2X_ERR("MCP validity signature bad\n");
+                BNX2X_ERR("BAD MCP validity signature\n");
 
-        bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) &
+        bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) &
                       DRV_MSG_SEQ_NUMBER_MASK);
 
         bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
-
+        bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
         bp->serdes_config =
-                SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config);
+                SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
         bp->lane_config =
                 SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
         bp->ext_phy_config =
@@ -6954,13 +7864,13 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
         bp->link_config =
                 SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
 
-        BNX2X_DEV_INFO("hw_config (%08x)  serdes_config (%08x)\n"
+        BNX2X_DEV_INFO("hw_config (%08x) board (%08x)  serdes_config (%08x)\n"
              KERN_INFO "  lane_config (%08x)  ext_phy_config (%08x)\n"
              KERN_INFO "  speed_cap_mask (%08x)  link_config (%08x)"
                        "  fw_seq (%08x)\n",
-                       bp->hw_config, bp->serdes_config, bp->lane_config,
-                       bp->ext_phy_config, bp->speed_cap_mask,
-                       bp->link_config, bp->fw_seq);
+                       bp->hw_config, bp->board, bp->serdes_config,
+                       bp->lane_config, bp->ext_phy_config,
+                       bp->speed_cap_mask, bp->link_config, bp->fw_seq);
 
         switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK);
         bnx2x_link_settings_supported(bp, switch_cfg);
@@ -7014,14 +7924,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
         return;
 
 set_mac: /* only supposed to happen on emulation/FPGA */
-        BNX2X_ERR("warning constant MAC workaround active\n");
-        bp->dev->dev_addr[0] = 0;
-        bp->dev->dev_addr[1] = 0x50;
-        bp->dev->dev_addr[2] = 0xc2;
-        bp->dev->dev_addr[3] = 0x2c;
-        bp->dev->dev_addr[4] = 0x71;
-        bp->dev->dev_addr[5] = port ? 0x0d : 0x0e;
-
+        BNX2X_ERR("warning rendom MAC workaround active\n");
+        random_ether_addr(bp->dev->dev_addr);
         memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6);
 
 }
@@ -7048,19 +7952,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
         }
 
         if (bp->phy_flags & PHY_XGXS_FLAG) {
-                cmd->port = PORT_FIBRE;
-        } else {
+                u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+
+                switch (ext_phy_type) {
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+                        cmd->port = PORT_FIBRE;
+                        break;
+
+                case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+                        cmd->port = PORT_TP;
+                        break;
+
+                default:
+                        DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+                           bp->ext_phy_config);
+                }
+        } else
                 cmd->port = PORT_TP;
-        }
 
         cmd->phy_address = bp->phy_addr;
         cmd->transceiver = XCVR_INTERNAL;
 
-        if (bp->req_autoneg & AUTONEG_SPEED) {
+        if (bp->req_autoneg & AUTONEG_SPEED)
                 cmd->autoneg = AUTONEG_ENABLE;
-        } else {
+        else
                 cmd->autoneg = AUTONEG_DISABLE;
-        }
 
         cmd->maxtxpkt = 0;
         cmd->maxrxpkt = 0;
@@ -7091,8 +8010,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
         switch (cmd->port) {
         case PORT_TP:
-                if (!(bp->supported & SUPPORTED_TP))
+                if (!(bp->supported & SUPPORTED_TP)) {
+                        DP(NETIF_MSG_LINK, "TP not supported\n");
                         return -EINVAL;
+                }
 
                 if (bp->phy_flags & PHY_XGXS_FLAG) {
                         bnx2x_link_reset(bp);
@@ -7102,8 +8023,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 break;
 
         case PORT_FIBRE:
-                if (!(bp->supported & SUPPORTED_FIBRE))
+                if (!(bp->supported & SUPPORTED_FIBRE)) {
+                        DP(NETIF_MSG_LINK, "FIBRE not supported\n");
                         return -EINVAL;
+                }
 
                 if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
                         bnx2x_link_reset(bp);
@@ -7113,12 +8036,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 break;
 
         default:
+                DP(NETIF_MSG_LINK, "Unknown port type\n");
                 return -EINVAL;
         }
 
         if (cmd->autoneg == AUTONEG_ENABLE) {
-                if (!(bp->supported & SUPPORTED_Autoneg))
+                if (!(bp->supported & SUPPORTED_Autoneg)) {
+                        DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
                         return -EINVAL;
+                }
 
                 /* advertise the requested speed and duplex if supported */
                 cmd->advertising &= bp->supported;
@@ -7133,14 +8059,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 switch (cmd->speed) {
                 case SPEED_10:
                         if (cmd->duplex == DUPLEX_FULL) {
-                                if (!(bp->supported & SUPPORTED_10baseT_Full))
+                                if (!(bp->supported &
+                                      SUPPORTED_10baseT_Full)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "10M full not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_10baseT_Full |
                                                ADVERTISED_TP);
                         } else {
-                                if (!(bp->supported & SUPPORTED_10baseT_Half))
+                                if (!(bp->supported &
+                                      SUPPORTED_10baseT_Half)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "10M half not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_10baseT_Half |
                                                ADVERTISED_TP);
@@ -7150,15 +8084,21 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 case SPEED_100:
                         if (cmd->duplex == DUPLEX_FULL) {
                                 if (!(bp->supported &
-                                                SUPPORTED_100baseT_Full))
+                                                SUPPORTED_100baseT_Full)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "100M full not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_100baseT_Full |
                                                ADVERTISED_TP);
                         } else {
                                 if (!(bp->supported &
-                                                SUPPORTED_100baseT_Half))
+                                                SUPPORTED_100baseT_Half)) {
+                                        DP(NETIF_MSG_LINK,
+                                           "100M half not supported\n");
                                         return -EINVAL;
+                                }
 
                                 advertising = (ADVERTISED_100baseT_Half |
                                                ADVERTISED_TP);
@@ -7166,39 +8106,54 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                         break;
 
                 case SPEED_1000:
-                        if (cmd->duplex != DUPLEX_FULL)
+                        if (cmd->duplex != DUPLEX_FULL) {
+                                DP(NETIF_MSG_LINK, "1G half not supported\n");
                                 return -EINVAL;
+                        }
 
-                        if (!(bp->supported & SUPPORTED_1000baseT_Full))
+                        if (!(bp->supported & SUPPORTED_1000baseT_Full)) {
+                                DP(NETIF_MSG_LINK, "1G full not supported\n");
                                 return -EINVAL;
+                        }
 
                         advertising = (ADVERTISED_1000baseT_Full |
                                        ADVERTISED_TP);
                         break;
 
                 case SPEED_2500:
-                        if (cmd->duplex != DUPLEX_FULL)
+                        if (cmd->duplex != DUPLEX_FULL) {
+                                DP(NETIF_MSG_LINK,
+                                   "2.5G half not supported\n");
                                 return -EINVAL;
+                        }
 
-                        if (!(bp->supported & SUPPORTED_2500baseT_Full))
+                        if (!(bp->supported & SUPPORTED_2500baseX_Full)) {
+                                DP(NETIF_MSG_LINK,
+                                   "2.5G full not supported\n");
                                 return -EINVAL;
+                        }
 
-                        advertising = (ADVERTISED_2500baseT_Full |
+                        advertising = (ADVERTISED_2500baseX_Full |
                                        ADVERTISED_TP);
                         break;
 
                 case SPEED_10000:
-                        if (cmd->duplex != DUPLEX_FULL)
+                        if (cmd->duplex != DUPLEX_FULL) {
+                                DP(NETIF_MSG_LINK, "10G half not supported\n");
                                 return -EINVAL;
+                        }
 
-                        if (!(bp->supported & SUPPORTED_10000baseT_Full))
+                        if (!(bp->supported & SUPPORTED_10000baseT_Full)) {
+                                DP(NETIF_MSG_LINK, "10G full not supported\n");
                                 return -EINVAL;
+                        }
 
                         advertising = (ADVERTISED_10000baseT_Full |
                                        ADVERTISED_FIBRE);
                         break;
 
                 default:
+                        DP(NETIF_MSG_LINK, "Unsupported speed\n");
                         return -EINVAL;
                 }
 
@@ -7398,8 +8353,7 @@ static void bnx2x_disable_nvram_access(struct bnx2x *bp)
 static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val,
                                   u32 cmd_flags)
 {
-        int rc;
-        int count, i;
+        int count, i, rc;
         u32 val;
 
         /* build the command word */
@@ -7452,13 +8406,13 @@ static int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf,
 
         if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
                 DP(NETIF_MSG_NVM,
-                   "Invalid paramter: offset 0x%x  buf_size 0x%x\n",
+                   "Invalid parameter: offset 0x%x  buf_size 0x%x\n",
                    offset, buf_size);
                 return -EINVAL;
         }
 
         if (offset + buf_size > bp->flash_size) {
-                DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+                DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
                                   " buf_size (0x%x) > flash_size (0x%x)\n",
                    offset, buf_size, bp->flash_size);
                 return -EINVAL;
@@ -7519,8 +8473,7 @@ static int bnx2x_get_eeprom(struct net_device *dev,
 static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
                                    u32 cmd_flags)
 {
-        int rc;
-        int count, i;
+        int count, i, rc;
 
         /* build the command word */
         cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR;
@@ -7557,7 +8510,7 @@ static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
         return rc;
 }
 
-#define BYTE_OFFSET(offset)             (8 * (offset & 0x03))
+#define BYTE_OFFSET(offset)             (8 * (offset & 0x03))
 
 static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
                               int buf_size)
@@ -7568,7 +8521,7 @@ static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
         u32 val;
 
         if (offset + buf_size > bp->flash_size) {
-                DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+                DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
                                   " buf_size (0x%x) > flash_size (0x%x)\n",
                    offset, buf_size, bp->flash_size);
                 return -EINVAL;
@@ -7621,13 +8574,13 @@ static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf,
 
         if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
                 DP(NETIF_MSG_NVM,
-                   "Invalid paramter: offset 0x%x  buf_size 0x%x\n",
+                   "Invalid parameter: offset 0x%x  buf_size 0x%x\n",
                    offset, buf_size);
                 return -EINVAL;
         }
 
         if (offset + buf_size > bp->flash_size) {
-                DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+                DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
                                   " buf_size (0x%x) > flash_size (0x%x)\n",
                    offset, buf_size, bp->flash_size);
                 return -EINVAL;
@@ -7788,52 +8741,29 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
            DP_LEVEL "  autoneg %d  rx_pause %d  tx_pause %d\n",
            epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
 
-        bp->req_flow_ctrl = FLOW_CTRL_AUTO;
         if (epause->autoneg) {
-                bp->req_autoneg |= AUTONEG_FLOW_CTRL;
-                if (bp->dev->mtu <= 4500) {
-                        bp->pause_mode = PAUSE_BOTH;
-                        bp->advertising |= (ADVERTISED_Pause |
-                                            ADVERTISED_Asym_Pause);
-                } else {
-                        bp->pause_mode = PAUSE_ASYMMETRIC;
-                        bp->advertising |= ADVERTISED_Asym_Pause;
+                if (!(bp->supported & SUPPORTED_Autoneg)) {
+                        DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
+                        return -EINVAL;
                 }
 
-        } else {
+                bp->req_autoneg |= AUTONEG_FLOW_CTRL;
+        } else
                 bp->req_autoneg &= ~AUTONEG_FLOW_CTRL;
 
-                if (epause->rx_pause)
-                        bp->req_flow_ctrl |= FLOW_CTRL_RX;
-                if (epause->tx_pause)
-                        bp->req_flow_ctrl |= FLOW_CTRL_TX;
-
-                switch (bp->req_flow_ctrl) {
-                case FLOW_CTRL_AUTO:
-                        bp->req_flow_ctrl = FLOW_CTRL_NONE;
-                        bp->pause_mode = PAUSE_NONE;
-                        bp->advertising &= ~(ADVERTISED_Pause |
-                                             ADVERTISED_Asym_Pause);
-                        break;
+        bp->req_flow_ctrl = FLOW_CTRL_AUTO;
 
-                case FLOW_CTRL_TX:
-                        bp->pause_mode = PAUSE_ASYMMETRIC;
-                        bp->advertising |= ADVERTISED_Asym_Pause;
-                        break;
+        if (epause->rx_pause)
+                bp->req_flow_ctrl |= FLOW_CTRL_RX;
+        if (epause->tx_pause)
+                bp->req_flow_ctrl |= FLOW_CTRL_TX;
 
-                case FLOW_CTRL_RX:
-                case FLOW_CTRL_BOTH:
-                        bp->pause_mode = PAUSE_BOTH;
-                        bp->advertising |= (ADVERTISED_Pause |
-                                            ADVERTISED_Asym_Pause);
-                        break;
-                }
-        }
+        if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
+            (bp->req_flow_ctrl == FLOW_CTRL_AUTO))
+                bp->req_flow_ctrl = FLOW_CTRL_NONE;
 
-        DP(NETIF_MSG_LINK, "req_autoneg 0x%x  req_flow_ctrl 0x%x\n"
-           DP_LEVEL "  pause_mode %d  advertising 0x%x\n",
-           bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode,
-           bp->advertising);
+        DP(NETIF_MSG_LINK, "req_autoneg 0x%x  req_flow_ctrl 0x%x\n",
+           bp->req_autoneg, bp->req_flow_ctrl);
 
         bnx2x_stop_stats(bp);
         bnx2x_link_initialize(bp);
@@ -7906,81 +8836,87 @@ static void bnx2x_self_test(struct net_device *dev,
 static struct {
         char string[ETH_GSTRING_LEN];
 } bnx2x_stats_str_arr[BNX2X_NUM_STATS] = {
-        { "rx_bytes"},                           /*  0 */
-        { "rx_error_bytes"},                     /*  1 */
-        { "tx_bytes"},                           /*  2 */
-        { "tx_error_bytes"},                     /*  3 */
-        { "rx_ucast_packets"},                   /*  4 */
-        { "rx_mcast_packets"},                   /*  5 */
-        { "rx_bcast_packets"},                   /*  6 */
-        { "tx_ucast_packets"},                   /*  7 */
-        { "tx_mcast_packets"},                   /*  8 */
-        { "tx_bcast_packets"},                   /*  9 */
-        { "tx_mac_errors"},                      /* 10 */
-        { "tx_carrier_errors"},                  /* 11 */
-        { "rx_crc_errors"},                      /* 12 */
-        { "rx_align_errors"},                    /* 13 */
-        { "tx_single_collisions"},               /* 14 */
-        { "tx_multi_collisions"},                /* 15 */
-        { "tx_deferred"},                        /* 16 */
-        { "tx_excess_collisions"},               /* 17 */
-        { "tx_late_collisions"},                 /* 18 */
-        { "tx_total_collisions"},                /* 19 */
-        { "rx_fragments"},                       /* 20 */
-        { "rx_jabbers"},                         /* 21 */
-        { "rx_undersize_packets"},               /* 22 */
-        { "rx_oversize_packets"},                /* 23 */
-        { "rx_xon_frames"},                      /* 24 */
-        { "rx_xoff_frames"},                     /* 25 */
-        { "tx_xon_frames"},                      /* 26 */
-        { "tx_xoff_frames"},                     /* 27 */
-        { "rx_mac_ctrl_frames"},                 /* 28 */
-        { "rx_filtered_packets"},                /* 29 */
-        { "rx_discards"},                        /* 30 */
+        { "rx_bytes"},
+        { "rx_error_bytes"},
+        { "tx_bytes"},
+        { "tx_error_bytes"},
+        { "rx_ucast_packets"},
+        { "rx_mcast_packets"},
+        { "rx_bcast_packets"},
+        { "tx_ucast_packets"},
+        { "tx_mcast_packets"},
+        { "tx_bcast_packets"},
+        { "tx_mac_errors"},     /* 10 */
+        { "tx_carrier_errors"},
+        { "rx_crc_errors"},
+        { "rx_align_errors"},
+        { "tx_single_collisions"},
+        { "tx_multi_collisions"},
+        { "tx_deferred"},
+        { "tx_excess_collisions"},
+        { "tx_late_collisions"},
+        { "tx_total_collisions"},
+        { "rx_fragments"},      /* 20 */
+        { "rx_jabbers"},
+        { "rx_undersize_packets"},
+        { "rx_oversize_packets"},
+        { "rx_xon_frames"},
+        { "rx_xoff_frames"},
+        { "tx_xon_frames"},
+        { "tx_xoff_frames"},
+        { "rx_mac_ctrl_frames"},
+        { "rx_filtered_packets"},
+        { "rx_discards"},       /* 30 */
+        { "brb_discard"},
+        { "brb_truncate"},
+        { "xxoverflow"}
 };
 
 #define STATS_OFFSET32(offset_name) \
         (offsetof(struct bnx2x_eth_stats, offset_name) / 4)
 
 static unsigned long bnx2x_stats_offset_arr[BNX2X_NUM_STATS] = {
-        STATS_OFFSET32(total_bytes_received_hi),                     /*  0 */
-        STATS_OFFSET32(stat_IfHCInBadOctets_hi),                     /*  1 */
-        STATS_OFFSET32(total_bytes_transmitted_hi),                  /*  2 */
-        STATS_OFFSET32(stat_IfHCOutBadOctets_hi),                    /*  3 */
-        STATS_OFFSET32(total_unicast_packets_received_hi),           /*  4 */
-        STATS_OFFSET32(total_multicast_packets_received_hi),         /*  5 */
-        STATS_OFFSET32(total_broadcast_packets_received_hi),         /*  6 */
-        STATS_OFFSET32(total_unicast_packets_transmitted_hi),        /*  7 */
-        STATS_OFFSET32(total_multicast_packets_transmitted_hi),      /*  8 */
-        STATS_OFFSET32(total_broadcast_packets_transmitted_hi),      /*  9 */
-        STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors),     /* 10 */
-        STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors),            /* 11 */
-        STATS_OFFSET32(crc_receive_errors),                          /* 12 */
-        STATS_OFFSET32(alignment_errors),                            /* 13 */
-        STATS_OFFSET32(single_collision_transmit_frames),            /* 14 */
-        STATS_OFFSET32(multiple_collision_transmit_frames),          /* 15 */
-        STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions),         /* 16 */
-        STATS_OFFSET32(excessive_collision_frames),                  /* 17 */
-        STATS_OFFSET32(late_collision_frames),                       /* 18 */
-        STATS_OFFSET32(number_of_bugs_found_in_stats_spec),          /* 19 */
-        STATS_OFFSET32(runt_packets_received),                       /* 20 */
-        STATS_OFFSET32(jabber_packets_received),                     /* 21 */
-        STATS_OFFSET32(error_runt_packets_received),                 /* 22 */
-        STATS_OFFSET32(error_jabber_packets_received),               /* 23 */
-        STATS_OFFSET32(pause_xon_frames_received),                   /* 24 */
-        STATS_OFFSET32(pause_xoff_frames_received),                  /* 25 */
-        STATS_OFFSET32(pause_xon_frames_transmitted),                /* 26 */
-        STATS_OFFSET32(pause_xoff_frames_transmitted),               /* 27 */
-        STATS_OFFSET32(control_frames_received),                     /* 28 */
-        STATS_OFFSET32(mac_filter_discard),                          /* 29 */
-        STATS_OFFSET32(no_buff_discard),                             /* 30 */
+        STATS_OFFSET32(total_bytes_received_hi),
+        STATS_OFFSET32(stat_IfHCInBadOctets_hi),
+        STATS_OFFSET32(total_bytes_transmitted_hi),
+        STATS_OFFSET32(stat_IfHCOutBadOctets_hi),
+        STATS_OFFSET32(total_unicast_packets_received_hi),
+        STATS_OFFSET32(total_multicast_packets_received_hi),
+        STATS_OFFSET32(total_broadcast_packets_received_hi),
+        STATS_OFFSET32(total_unicast_packets_transmitted_hi),
+        STATS_OFFSET32(total_multicast_packets_transmitted_hi),
+        STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
+        STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */
+        STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors),
+        STATS_OFFSET32(crc_receive_errors),
+        STATS_OFFSET32(alignment_errors),
+        STATS_OFFSET32(single_collision_transmit_frames),
+        STATS_OFFSET32(multiple_collision_transmit_frames),
+        STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions),
+        STATS_OFFSET32(excessive_collision_frames),
+        STATS_OFFSET32(late_collision_frames),
+        STATS_OFFSET32(number_of_bugs_found_in_stats_spec),
+        STATS_OFFSET32(runt_packets_received),                  /* 20 */
+        STATS_OFFSET32(jabber_packets_received),
+        STATS_OFFSET32(error_runt_packets_received),
+        STATS_OFFSET32(error_jabber_packets_received),
+        STATS_OFFSET32(pause_xon_frames_received),
+        STATS_OFFSET32(pause_xoff_frames_received),
+        STATS_OFFSET32(pause_xon_frames_transmitted),
+        STATS_OFFSET32(pause_xoff_frames_transmitted),
+        STATS_OFFSET32(control_frames_received),
+        STATS_OFFSET32(mac_filter_discard),
+        STATS_OFFSET32(no_buff_discard),                        /* 30 */
+        STATS_OFFSET32(brb_discard),
+        STATS_OFFSET32(brb_truncate_discard),
+        STATS_OFFSET32(xxoverflow_discard)
 };
 
 static u8 bnx2x_stats_len_arr[BNX2X_NUM_STATS] = {
         8, 0, 8, 0, 8, 8, 8, 8, 8, 8,
         4, 0, 4, 4, 4, 4, 4, 4, 4, 4,
         4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
-        4,
+        4, 4, 4, 4
 };
 
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
@@ -8138,9 +9074,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
  * net_device service functions
  */
 
-/* Called with rtnl_lock from vlan functions and also netif_tx_lock
- * from set_multicast.
- */
+/* called with netif_tx_lock from set_multicast */
 static void bnx2x_set_rx_mode(struct net_device *dev)
 {
         struct bnx2x *bp = netdev_priv(dev);
@@ -8314,7 +9248,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
                                ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
         tx_bd->general_data |= 1; /* header nbd */
 
-        /* remeber the first bd of the packet */
+        /* remember the first bd of the packet */
         tx_buf->first_bd = bd_prod;
 
         DP(NETIF_MSG_TX_QUEUED,
@@ -8334,7 +9268,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
                 /* for now NS flag is not used in Linux */
                 pbd->global_data = (len |
-                                    ((skb->protocol == ETH_P_8021Q) <<
+                                    ((skb->protocol == ntohs(ETH_P_8021Q)) <<
                                      ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT));
                 pbd->ip_hlen = ip_hdrlen(skb) / 2;
                 pbd->total_hlen = cpu_to_le16(len + pbd->ip_hlen);
@@ -8343,7 +9277,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
                         tx_bd->bd_flags.as_bitfield |=
                                                 ETH_TX_BD_FLAGS_TCP_CSUM;
-                        pbd->tcp_flags = htonl(tcp_flag_word(skb)) & 0xFFFF;
+                        pbd->tcp_flags = pbd_tcp_flags(skb);
                         pbd->total_hlen += cpu_to_le16(tcp_hdrlen(skb) / 2);
                         pbd->tcp_pseudo_csum = swab16(th->check);
 
@@ -8387,7 +9321,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         if (skb_shinfo(skb)->gso_size &&
             (skb->len > (bp->dev->mtu + ETH_HLEN))) {
-                int hlen = 2 * le32_to_cpu(pbd->total_hlen);
+                int hlen = 2 * le16_to_cpu(pbd->total_hlen);
 
                 DP(NETIF_MSG_TX_QUEUED,
                    "TSO packet len %d  hlen %d  total len %d  tso size %d\n",
@@ -8427,7 +9361,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
                         tx_bd->vlan = cpu_to_le16(pkt_prod);
                         /* this marks the bd
                          * as one that has no individual mapping
-                         * the FW ignors this flag in a bd not maked start
+                         * the FW ignores this flag in a bd not marked start
                          */
                         tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_SW_LSO;
                         DP(NETIF_MSG_TX_QUEUED,
@@ -8504,9 +9438,11 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %u  bd %d\n", nbd, bd_prod);
 
-        fp->hw_tx_prods->bds_prod += cpu_to_le16(nbd);
+        fp->hw_tx_prods->bds_prod =
+                cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
         mb(); /* FW restriction: must not reorder writing nbd and packets */
-        fp->hw_tx_prods->packets_prod += cpu_to_le32(1);
+        fp->hw_tx_prods->packets_prod =
+                cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1);
         DOORBELL(bp, fp_index, 0);
 
         mmiowb();
@@ -8525,11 +9461,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
         return NETDEV_TX_OK;
 }
 
-static struct net_device_stats *bnx2x_get_stats(struct net_device *dev)
-{
-        return &dev->stats;
-}
-
 /* Called with rtnl_lock */
 static int bnx2x_open(struct net_device *dev)
 {
@@ -8543,16 +9474,13 @@ static int bnx2x_open(struct net_device *dev)
 /* Called with rtnl_lock */
 static int bnx2x_close(struct net_device *dev)
 {
-        int rc;
         struct bnx2x *bp = netdev_priv(dev);
 
         /* Unload the driver, release IRQs */
-        rc = bnx2x_nic_unload(bp, 1);
-        if (rc) {
-                BNX2X_ERR("bnx2x_nic_unload failed: %d\n", rc);
-                return rc;
-        }
-        bnx2x_set_power_state(bp, PCI_D3hot);
+        bnx2x_nic_unload(bp, 1);
+
+        if (!CHIP_REV_IS_SLOW(bp))
+                bnx2x_set_power_state(bp, PCI_D3hot);
 
         return 0;
 }
@@ -8584,7 +9512,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
         case SIOCGMIIPHY:
                 data->phy_id = bp->phy_addr;
 
-                /* fallthru */
+                /* fallthrough */
         case SIOCGMIIREG: {
                 u32 mii_regval;
 
@@ -8633,7 +9561,7 @@ static int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
                 return -EINVAL;
 
         /* This does not race with packet allocation
-         * because the actuall alloc size is
+         * because the actual alloc size is
          * only updated as part of load
          */
         dev->mtu = new_mtu;
@@ -8666,7 +9594,7 @@ static void bnx2x_vlan_rx_register(struct net_device *dev,
 
         bp->vlgrp = vlgrp;
         if (netif_running(dev))
-                bnx2x_set_rx_mode(dev);
+                bnx2x_set_client_config(bp);
 }
 #endif
 
@@ -8695,14 +9623,18 @@ static void bnx2x_reset_task(struct work_struct *work)
         if (!netif_running(bp->dev))
                 return;
 
-        bp->in_reset_task = 1;
+        rtnl_lock();
 
-        bnx2x_netif_stop(bp);
+        if (bp->state != BNX2X_STATE_OPEN) {
+                DP(NETIF_MSG_TX_ERR, "state is %x, returning\n", bp->state);
+                goto reset_task_exit;
+        }
 
         bnx2x_nic_unload(bp, 0);
         bnx2x_nic_load(bp, 0);
 
-        bp->in_reset_task = 0;
+reset_task_exit:
+        rtnl_unlock();
 }
 
 static int __devinit bnx2x_init_board(struct pci_dev *pdev,
@@ -8783,8 +9715,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev,
 
         spin_lock_init(&bp->phy_lock);
 
-        bp->in_reset_task = 0;
-
         INIT_WORK(&bp->reset_task, bnx2x_reset_task);
         INIT_WORK(&bp->sp_task, bnx2x_sp_task);
 
@@ -8813,7 +9743,7 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev,
         bnx2x_get_hwinfo(bp);
 
         if (CHIP_REV(bp) == CHIP_REV_FPGA) {
-                printk(KERN_ERR PFX "FPGA detacted. MCP disabled,"
+                printk(KERN_ERR PFX "FPGA detected. MCP disabled,"
                        " will only init first device\n");
                 onefunc = 1;
                 nomcp = 1;
@@ -8882,14 +9812,32 @@ err_out:
         return rc;
 }
 
+static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp)
+{
+        u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+
+        val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
+        return val;
+}
+
+/* return value of 1=2.5GHz 2=5GHz */
+static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
+{
+        u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+
+        val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
+        return val;
+}
+
 static int __devinit bnx2x_init_one(struct pci_dev *pdev,
                                     const struct pci_device_id *ent)
 {
         static int version_printed;
         struct net_device *dev = NULL;
         struct bnx2x *bp;
-        int rc, i;
+        int rc;
         int port = PCI_FUNC(pdev->devfn);
+        DECLARE_MAC_BUF(mac);
 
         if (version_printed++ == 0)
                 printk(KERN_INFO "%s", version);
@@ -8906,6 +9854,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
         if (port && onefunc) {
                 printk(KERN_ERR PFX "second function disabled. exiting\n");
+                free_netdev(dev);
                 return 0;
         }
 
@@ -8918,7 +9867,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
         dev->hard_start_xmit = bnx2x_start_xmit;
         dev->watchdog_timeo = TX_TIMEOUT;
 
-        dev->get_stats = bnx2x_get_stats;
         dev->ethtool_ops = &bnx2x_ethtool_ops;
         dev->open = bnx2x_open;
         dev->stop = bnx2x_close;
@@ -8944,7 +9892,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
         rc = register_netdev(dev);
         if (rc) {
-                printk(KERN_ERR PFX "Cannot register net device\n");
+                dev_err(&pdev->dev, "Cannot register net device\n");
                 if (bp->regview)
                         iounmap(bp->regview);
                 if (bp->doorbells)
@@ -8959,32 +9907,30 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
         pci_set_drvdata(pdev, dev);
 
         bp->name = board_info[ent->driver_data].name;
-        printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz "
-               "found at mem %lx, IRQ %d, ",
-               dev->name, bp->name,
+        printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
+               " IRQ %d, ", dev->name, bp->name,
                ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
                ((CHIP_ID(bp) & 0x0ff0) >> 4),
-               ((bp->flags & PCIX_FLAG) ? "-X" : ""),
-               ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
-               bp->bus_speed_mhz,
-               dev->base_addr,
-               bp->pdev->irq);
-
-        printk("node addr ");
-        for (i = 0; i < 6; i++)
-                printk("%2.2x", dev->dev_addr[i]);
-        printk("\n");
-
+               bnx2x_get_pcie_width(bp),
+               (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",
+               dev->base_addr, bp->pdev->irq);
+        printk(KERN_CONT "node addr %s\n", print_mac(mac, dev->dev_addr));
         return 0;
 }
 
 static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
-        struct bnx2x *bp = netdev_priv(dev);
+        struct bnx2x *bp;
+
+        if (!dev) {
+                /* we get here if init_one() fails */
+                printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+                return;
+        }
+
+        bp = netdev_priv(dev);
 
-        flush_scheduled_work();
-        /*tasklet_kill(&bp->sp_task);*/
         unregister_netdev(dev);
 
         if (bp->regview)
@@ -9002,34 +9948,43 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
-        struct bnx2x *bp = netdev_priv(dev);
-        int rc;
+        struct bnx2x *bp;
+
+        if (!dev)
+                return 0;
 
         if (!netif_running(dev))
                 return 0;
 
-        rc = bnx2x_nic_unload(bp, 0);
-        if (!rc)
-                return rc;
+        bp = netdev_priv(dev);
+
+        bnx2x_nic_unload(bp, 0);
 
         netif_device_detach(dev);
-        pci_save_state(pdev);
 
+        pci_save_state(pdev);
         bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
+
         return 0;
 }
 
 static int bnx2x_resume(struct pci_dev *pdev)
 {
         struct net_device *dev = pci_get_drvdata(pdev);
-        struct bnx2x *bp = netdev_priv(dev);
+        struct bnx2x *bp;
         int rc;
 
+        if (!dev) {
+                printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+                return -ENODEV;
+        }
+
         if (!netif_running(dev))
                 return 0;
 
-        pci_restore_state(pdev);
+        bp = netdev_priv(dev);
 
+        pci_restore_state(pdev);
         bnx2x_set_power_state(bp, PCI_D0);
         netif_device_attach(dev);
 
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4f7ae6f77452..4f0c0d31e7c1 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1,6 +1,6 @@
 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
 #define BNX2X_MSG_STATS                 0x20000 /* was: NETIF_MSG_TIMER */
 #define NETIF_MSG_NVM                   0x40000 /* was: NETIF_MSG_HW */
 #define NETIF_MSG_DMAE                  0x80000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_SP                    0x100000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_FP                    0x200000 /* was: NETIF_MSG_INTR */
 
 #define DP_LEVEL                        KERN_NOTICE     /* was: KERN_DEBUG */
 
@@ -40,6 +42,12 @@
                 __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
         } while (0)
 
+/* for logging (never masked) */
+#define BNX2X_LOG(__fmt, __args...) do { \
+        printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \
+                __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
+        } while (0)
+
 /* before we have a dev->name use dev_info() */
 #define BNX2X_DEV_INFO(__fmt, __args...) do { \
         if (bp->msglevel & NETIF_MSG_PROBE) \
@@ -423,8 +431,6 @@ struct bnx2x_fastpath {
 #define BNX2X_FP_STATE_OPEN             0xa0000
 #define BNX2X_FP_STATE_HALTING          0xb0000
 #define BNX2X_FP_STATE_HALTED           0xc0000
-#define BNX2X_FP_STATE_DELETED          0xd0000
-#define BNX2X_FP_STATE_CLOSE_IRQ        0xe0000
 
         int                     index;
 
@@ -505,7 +511,6 @@ struct bnx2x {
         struct eth_spe          *spq;
         dma_addr_t              spq_mapping;
         u16                     spq_prod_idx;
-        u16                     dsb_sp_prod_idx;
         struct eth_spe          *spq_prod_bd;
         struct eth_spe          *spq_last_bd;
         u16                     *dsb_sp_prod;
@@ -517,7 +522,7 @@ struct bnx2x {
          */
         u8                      stat_pending;
 
-        /* End of fileds used in the performance code paths */
+        /* End of fields used in the performance code paths */
 
         int                     panic;
         int                     msglevel;
@@ -540,8 +545,6 @@ struct bnx2x {
         spinlock_t              phy_lock;
 
         struct work_struct      reset_task;
-        u16                     in_reset_task;
-
         struct work_struct      sp_task;
 
         struct timer_list       timer;
@@ -555,7 +558,6 @@ struct bnx2x {
 #define CHIP_ID(bp)                     (((bp)->chip_id) & 0xfffffff0)
 
 #define CHIP_NUM(bp)                    (((bp)->chip_id) & 0xffff0000)
-#define CHIP_NUM_5710                   0x57100000
 
 #define CHIP_REV(bp)                    (((bp)->chip_id) & 0x0000f000)
 #define CHIP_REV_Ax                     0x00000000
@@ -574,7 +576,8 @@ struct bnx2x {
         u32                     fw_mb;
 
         u32                     hw_config;
-        u32                     serdes_config;
+        u32                     board;
+        u32                     serdes_config;
         u32                     lane_config;
         u32                     ext_phy_config;
 #define XGXS_EXT_PHY_TYPE(bp)           (bp->ext_phy_config & \
@@ -595,11 +598,11 @@ struct bnx2x {
         u8                      tx_lane_swap;
 
         u8                      link_up;
+        u8                      phy_link_up;
 
         u32                     supported;
 /* link settings - missing defines */
 #define SUPPORTED_2500baseT_Full        (1 << 15)
-#define SUPPORTED_CX4                   (1 << 16)
 
         u32                     phy_flags;
 /*#define PHY_SERDES_FLAG                       0x1*/
@@ -644,16 +647,9 @@ struct bnx2x {
 #define FLOW_CTRL_BOTH                  PORT_FEATURE_FLOW_CONTROL_BOTH
 #define FLOW_CTRL_NONE                  PORT_FEATURE_FLOW_CONTROL_NONE
 
-        u32                     pause_mode;
-#define PAUSE_NONE                      0
-#define PAUSE_SYMMETRIC                 1
-#define PAUSE_ASYMMETRIC                2
-#define PAUSE_BOTH                      3
-
         u32                     advertising;
 /* link settings - missing defines */
 #define ADVERTISED_2500baseT_Full       (1 << 15)
-#define ADVERTISED_CX4                  (1 << 16)
 
         u32                     link_status;
         u32                     line_speed;
@@ -667,6 +663,8 @@ struct bnx2x {
 #define NVRAM_TIMEOUT_COUNT             30000
 #define NVRAM_PAGE_SIZE                 256
 
+        u8                      wol;
+
         int                     rx_ring_size;
 
         u16                     tx_quick_cons_trip_int;
@@ -718,9 +716,6 @@ struct bnx2x {
 #endif
 
         char                    *name;
-        u16                     bus_speed_mhz;
-        u8                      wol;
-        u8                      pad;
 
         /* used to synchronize stats collecting */
         int                     stats_state;
@@ -856,8 +851,8 @@ struct bnx2x {
 #define MAX_SPQ_PENDING                 8
 
 
-#define BNX2X_NUM_STATS                 31
-#define BNX2X_NUM_TESTS                 2
+#define BNX2X_NUM_STATS                 34
+#define BNX2X_NUM_TESTS                 1
 
 
 #define DPM_TRIGER_TYPE                 0x40
@@ -867,6 +862,15 @@ struct bnx2x {
                        DPM_TRIGER_TYPE); \
         } while (0)
 
+/* PCIE link and speed */
+#define PCICFG_LINK_WIDTH               0x1f00000
+#define PCICFG_LINK_WIDTH_SHIFT         20
+#define PCICFG_LINK_SPEED               0xf0000
+#define PCICFG_LINK_SPEED_SHIFT         16
+
+#define BMAC_CONTROL_RX_ENABLE          2
+
+#define pbd_tcp_flags(skb)      (ntohl(tcp_flag_word(tcp_hdr(skb)))>>16 & 0xff)
 
 /* stuff added to make the code fit 80Col */
 
@@ -939,13 +943,13 @@ struct bnx2x {
 #define LINK_16GTFD                     LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
 #define LINK_16GXFD                     LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
 
-#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \
+#define NIG_STATUS_XGXS0_LINK10G \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
-#define NIG_XGXS0_LINK_STATUS \
+#define NIG_STATUS_XGXS0_LINK_STATUS \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
-#define NIG_XGXS0_LINK_STATUS_SIZE \
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
-#define NIG_SERDES0_LINK_STATUS \
+#define NIG_STATUS_SERDES0_LINK_STATUS \
                 NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
 #define NIG_MASK_MI_INT \
                 NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index 62a6eb81025a..3b968904ca65 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -1,6 +1,6 @@
 /* bnx2x_fw_defs.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 6fd959c34d1f..b21075ccb52e 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1,6 +1,6 @@
 /* bnx2x_hsi.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -8,169 +8,9 @@
  */
 
 
-#define FUNC_0                          0
-#define FUNC_1                          1
-#define FUNC_MAX                        2
-
-
-/* This value (in milliseconds) determines the frequency of the driver
- * issuing the PULSE message code.  The firmware monitors this periodic
- * pulse to determine when to switch to an OS-absent mode. */
-#define DRV_PULSE_PERIOD_MS             250
-
-/* This value (in milliseconds) determines how long the driver should
- * wait for an acknowledgement from the firmware before timing out.  Once
- * the firmware has timed out, the driver will assume there is no firmware
- * running and there won't be any firmware-driver synchronization during a
- * driver reset. */
-#define FW_ACK_TIME_OUT_MS              5000
-
-#define FW_ACK_POLL_TIME_MS             1
-
-#define FW_ACK_NUM_OF_POLL      (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
-
-/* LED Blink rate that will achieve ~15.9Hz */
-#define LED_BLINK_RATE_VAL              480
-
-/****************************************************************************
- * Driver <-> FW Mailbox                                                    *
- ****************************************************************************/
-struct drv_fw_mb {
-        u32 drv_mb_header;
-#define DRV_MSG_CODE_MASK                       0xffff0000
-#define DRV_MSG_CODE_LOAD_REQ                   0x10000000
-#define DRV_MSG_CODE_LOAD_DONE                  0x11000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN          0x20000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS         0x20010000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP         0x20020000
-#define DRV_MSG_CODE_UNLOAD_DONE                0x21000000
-#define DRV_MSG_CODE_DIAG_ENTER_REQ             0x50000000
-#define DRV_MSG_CODE_DIAG_EXIT_REQ              0x60000000
-#define DRV_MSG_CODE_VALIDATE_KEY               0x70000000
-#define DRV_MSG_CODE_GET_CURR_KEY               0x80000000
-#define DRV_MSG_CODE_GET_UPGRADE_KEY            0x81000000
-#define DRV_MSG_CODE_GET_MANUF_KEY              0x82000000
-#define DRV_MSG_CODE_LOAD_L2B_PRAM              0x90000000
-
-#define DRV_MSG_SEQ_NUMBER_MASK                 0x0000ffff
-
-        u32 drv_mb_param;
-
-        u32 fw_mb_header;
-#define FW_MSG_CODE_MASK                        0xffff0000
-#define FW_MSG_CODE_DRV_LOAD_COMMON             0x11000000
-#define FW_MSG_CODE_DRV_LOAD_PORT               0x12000000
-#define FW_MSG_CODE_DRV_LOAD_REFUSED            0x13000000
-#define FW_MSG_CODE_DRV_LOAD_DONE               0x14000000
-#define FW_MSG_CODE_DRV_UNLOAD_COMMON           0x21000000
-#define FW_MSG_CODE_DRV_UNLOAD_PORT             0x22000000
-#define FW_MSG_CODE_DRV_UNLOAD_DONE             0x23000000
-#define FW_MSG_CODE_DIAG_ENTER_DONE             0x50000000
-#define FW_MSG_CODE_DIAG_REFUSE                 0x51000000
-#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS        0x70000000
-#define FW_MSG_CODE_VALIDATE_KEY_FAILURE        0x71000000
-#define FW_MSG_CODE_GET_KEY_DONE                0x80000000
-#define FW_MSG_CODE_NO_KEY                      0x8f000000
-#define FW_MSG_CODE_LIC_INFO_NOT_READY          0x8f800000
-#define FW_MSG_CODE_L2B_PRAM_LOADED             0x90000000
-#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE     0x91000000
-#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE     0x92000000
-#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE     0x93000000
-#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE     0x94000000
-
-#define FW_MSG_SEQ_NUMBER_MASK                  0x0000ffff
-
-        u32 fw_mb_param;
-
-        u32 link_status;
-        /* Driver should update this field on any link change event */
-
-#define LINK_STATUS_LINK_FLAG_MASK              0x00000001
-#define LINK_STATUS_LINK_UP                     0x00000001
-#define LINK_STATUS_SPEED_AND_DUPLEX_MASK       0x0000001E
-#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE    (0<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10THD              (1<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD              (2<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD            (3<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100T4              (4<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD            (5<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD            (6<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD            (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD            (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD            (8<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD            (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD            (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD             (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD             (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD             (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD             (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD           (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD           (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD             (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD             (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD             (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD             (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD             (15<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD             (15<<1)
-
-#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK            0x00000020
-#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED              0x00000020
-
-#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE             0x00000040
-#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK        0x00000080
-#define LINK_STATUS_PARALLEL_DETECTION_USED             0x00000080
-
-#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE        0x00000200
-#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE        0x00000400
-#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE          0x00000800
-#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE        0x00001000
-#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE        0x00002000
-#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE          0x00004000
-#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE          0x00008000
-
-#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK           0x00010000
-#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED             0x00010000
-
-#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK           0x00020000
-#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED             0x00020000
-
-#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK      0x000C0000
-#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE      (0<<18)
-#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE        (1<<18)
-#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE       (2<<18)
-#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE             (3<<18)
-
-#define LINK_STATUS_SERDES_LINK                         0x00100000
-
-#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE        0x00200000
-#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE        0x00400000
-#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE         0x00800000
-#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE         0x01000000
-#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE       0x02000000
-#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE         0x04000000
-#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE         0x08000000
-#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE         0x10000000
-
-        u32 drv_pulse_mb;
-#define DRV_PULSE_SEQ_MASK                              0x00007fff
-#define DRV_PULSE_SYSTEM_TIME_MASK                      0xffff0000
-        /* The system time is in the format of
-         * (year-2001)*12*32 + month*32 + day. */
-#define DRV_PULSE_ALWAYS_ALIVE                          0x00008000
-        /* Indicate to the firmware not to go into the
-         * OS-absent when it is not getting driver pulse.
-         * This is used for debugging as well for PXE(MBA). */
-
-        u32 mcp_pulse_mb;
-#define MCP_PULSE_SEQ_MASK                              0x00007fff
-#define MCP_PULSE_ALWAYS_ALIVE                          0x00008000
-        /* Indicates to the driver not to assert due to lack
-         * of MCP response */
-#define MCP_EVENT_MASK                                  0xffff0000
-#define MCP_EVENT_OTHER_DRIVER_RESET_REQ                0x00010000
-
-};
-
+#define PORT_0                          0
+#define PORT_1                          1
+#define PORT_MAX                        2
 
 /****************************************************************************
  * Shared HW configuration                                                  *
@@ -249,7 +89,7 @@ struct shared_hw_cfg {					 /* NVRAM Offset */
 #define SHARED_HW_CFG_SMBUS_TIMING_100KHZ           0x00000000
 #define SHARED_HW_CFG_SMBUS_TIMING_400KHZ           0x00001000
 
-#define SHARED_HW_CFG_HIDE_FUNC1                    0x00002000
+#define SHARED_HW_CFG_HIDE_PORT1                    0x00002000
 
         u32 power_dissipated;                                   /* 0x11c */
 #define SHARED_HW_CFG_POWER_DIS_CMN_MASK            0xff000000
@@ -290,6 +130,8 @@ struct shared_hw_cfg {					 /* NVRAM Offset */
 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G    0x00000006
 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G    0x00000007
 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G    0x00000008
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G    0x00000009
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G    0x0000000a
 
 #define SHARED_HW_CFG_BOARD_VER_MASK                0xffff0000
 #define SHARED_HW_CFG_BOARD_VER_SHIFT               16
@@ -304,13 +146,12 @@ struct shared_hw_cfg {					 /* NVRAM Offset */
 
 };
 
+
 /****************************************************************************
  * Port HW configuration                                                    *
  ****************************************************************************/
-struct port_hw_cfg {    /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
+struct port_hw_cfg {                        /* port 0: 0x12c  port 1: 0x2bc */
 
-        /* Fields below are port specific (in anticipation of dual port
-           devices */
         u32 pci_id;
 #define PORT_HW_CFG_PCI_VENDOR_ID_MASK              0xffff0000
 #define PORT_HW_CFG_PCI_DEVICE_ID_MASK              0x0000ffff
@@ -420,6 +261,8 @@ struct port_hw_cfg {	/* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706       0x00000500
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276       0x00000600
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481       0x00000700
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101       0x00000800
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE       0x0000fd00
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN      0x0000ff00
 
 #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK          0x000000ff
@@ -462,11 +305,13 @@ struct port_hw_cfg {	/* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
 
 };
 
+
 /****************************************************************************
  * Shared Feature configuration                                             *
  ****************************************************************************/
 struct shared_feat_cfg {                                 /* NVRAM Offset */
-        u32 bmc_common;                                         /* 0x450 */
+
+        u32 config;                                             /* 0x450 */
 #define SHARED_FEATURE_BMC_ECHO_MODE_EN             0x00000001
 
 };
@@ -475,7 +320,8 @@ struct shared_feat_cfg {				 /* NVRAM Offset */
 /****************************************************************************
  * Port Feature configuration                                               *
  ****************************************************************************/
-struct port_feat_cfg {  /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
+struct port_feat_cfg {                      /* port 0: 0x454  port 1: 0x4c8 */
+
         u32 config;
 #define PORT_FEATURE_BAR1_SIZE_MASK                 0x0000000f
 #define PORT_FEATURE_BAR1_SIZE_SHIFT                0
@@ -609,8 +455,7 @@ struct port_feat_cfg {	/* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
 #define PORT_FEATURE_SMBUS_ADDR_MASK                0x000000fe
 #define PORT_FEATURE_SMBUS_ADDR_SHIFT               1
 
-        u32 iscsib_boot_cfg;
-#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT        0x00000001
+        u32 reserved1;
 
         u32 link_config;    /* Used as HW defaults for the driver */
 #define PORT_FEATURE_CONNECTED_SWITCH_MASK          0x03000000
@@ -657,20 +502,201 @@ struct port_feat_cfg {	/* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
 };
 
 
+/*****************************************************************************
+ * Device Information                                                        *
+ *****************************************************************************/
+struct dev_info {                                                    /* size */
+
+        u32    bc_rev; /* 8 bits each: major, minor, build */           /* 4 */
+
+        struct shared_hw_cfg     shared_hw_config;                     /* 40 */
+
+        struct port_hw_cfg       port_hw_config[PORT_MAX];      /* 400*2=800 */
+
+        struct shared_feat_cfg   shared_feature_config;                 /* 4 */
+
+        struct port_feat_cfg     port_feature_config[PORT_MAX]; /* 116*2=232 */
+
+};
+
+
+#define FUNC_0                          0
+#define FUNC_1                          1
+#define E1_FUNC_MAX                     2
+#define FUNC_MAX                        E1_FUNC_MAX
+
+
+/* This value (in milliseconds) determines the frequency of the driver
+ * issuing the PULSE message code.  The firmware monitors this periodic
+ * pulse to determine when to switch to an OS-absent mode. */
+#define DRV_PULSE_PERIOD_MS             250
+
+/* This value (in milliseconds) determines how long the driver should
+ * wait for an acknowledgement from the firmware before timing out.  Once
+ * the firmware has timed out, the driver will assume there is no firmware
+ * running and there won't be any firmware-driver synchronization during a
+ * driver reset. */
+#define FW_ACK_TIME_OUT_MS              5000
+
+#define FW_ACK_POLL_TIME_MS             1
+
+#define FW_ACK_NUM_OF_POLL      (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
+
+/* LED Blink rate that will achieve ~15.9Hz */
+#define LED_BLINK_RATE_VAL              480
+
 /****************************************************************************
- * Device Information                                                       *
+ * Driver <-> FW Mailbox                                                    *
  ****************************************************************************/
-struct dev_info {                                                   /* size */
+struct drv_port_mb {
+
+        u32 link_status;
+        /* Driver should update this field on any link change event */
+
+#define LINK_STATUS_LINK_FLAG_MASK                      0x00000001
+#define LINK_STATUS_LINK_UP                             0x00000001
+#define LINK_STATUS_SPEED_AND_DUPLEX_MASK               0x0000001E
+#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE    (0<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10THD              (1<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD              (2<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD            (3<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100T4              (4<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD            (5<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD            (6<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD            (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD            (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD            (8<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD            (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD            (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD             (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD             (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD             (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD             (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD           (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD           (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD             (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD             (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD             (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD             (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD             (15<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD             (15<<1)
+
+#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK            0x00000020
+#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED              0x00000020
+
+#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE             0x00000040
+#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK        0x00000080
+#define LINK_STATUS_PARALLEL_DETECTION_USED             0x00000080
+
+#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE        0x00000200
+#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE        0x00000400
+#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE          0x00000800
+#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE        0x00001000
+#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE        0x00002000
+#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE          0x00004000
+#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE          0x00008000
+
+#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK           0x00010000
+#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED             0x00010000
+
+#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK           0x00020000
+#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED             0x00020000
+
+#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK      0x000C0000
+#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE      (0<<18)
+#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE        (1<<18)
+#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE       (2<<18)
+#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE             (3<<18)
+
+#define LINK_STATUS_SERDES_LINK                         0x00100000
+
+#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE        0x00200000
+#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE        0x00400000
+#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE         0x00800000
+#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE         0x01000000
+#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE       0x02000000
+#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE         0x04000000
+#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE         0x08000000
+#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE         0x10000000
 
-        u32    bc_rev; /* 8 bits each: major, minor, build */          /* 4 */
+        u32 reserved[3];
 
-        struct shared_hw_cfg     shared_hw_config;                    /* 40 */
+};
+
+
+struct drv_func_mb {
+
+        u32 drv_mb_header;
+#define DRV_MSG_CODE_MASK                               0xffff0000
+#define DRV_MSG_CODE_LOAD_REQ                           0x10000000
+#define DRV_MSG_CODE_LOAD_DONE                          0x11000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN                  0x20000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS                 0x20010000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP                 0x20020000
+#define DRV_MSG_CODE_UNLOAD_DONE                        0x21000000
+#define DRV_MSG_CODE_DIAG_ENTER_REQ                     0x50000000
+#define DRV_MSG_CODE_DIAG_EXIT_REQ                      0x60000000
+#define DRV_MSG_CODE_VALIDATE_KEY                       0x70000000
+#define DRV_MSG_CODE_GET_CURR_KEY                       0x80000000
+#define DRV_MSG_CODE_GET_UPGRADE_KEY                    0x81000000
+#define DRV_MSG_CODE_GET_MANUF_KEY                      0x82000000
+#define DRV_MSG_CODE_LOAD_L2B_PRAM                      0x90000000
+
+#define DRV_MSG_SEQ_NUMBER_MASK                         0x0000ffff
+
+        u32 drv_mb_param;
+
+        u32 fw_mb_header;
+#define FW_MSG_CODE_MASK                                0xffff0000
+#define FW_MSG_CODE_DRV_LOAD_COMMON                     0x10100000
+#define FW_MSG_CODE_DRV_LOAD_PORT                       0x10110000
+#define FW_MSG_CODE_DRV_LOAD_FUNCTION                   0x10120000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED                    0x10200000
+#define FW_MSG_CODE_DRV_LOAD_DONE                       0x11100000
+#define FW_MSG_CODE_DRV_UNLOAD_COMMON                   0x20100000
+#define FW_MSG_CODE_DRV_UNLOAD_PORT                     0x20110000
+#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION                 0x20120000
+#define FW_MSG_CODE_DRV_UNLOAD_DONE                     0x21100000
+#define FW_MSG_CODE_DIAG_ENTER_DONE                     0x50100000
+#define FW_MSG_CODE_DIAG_REFUSE                         0x50200000
+#define FW_MSG_CODE_DIAG_EXIT_DONE                      0x60100000
+#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS                0x70100000
+#define FW_MSG_CODE_VALIDATE_KEY_FAILURE                0x70200000
+#define FW_MSG_CODE_GET_KEY_DONE                        0x80100000
+#define FW_MSG_CODE_NO_KEY                              0x80f00000
+#define FW_MSG_CODE_LIC_INFO_NOT_READY                  0x80f80000
+#define FW_MSG_CODE_L2B_PRAM_LOADED                     0x90100000
+#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE             0x90210000
+#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE             0x90220000
+#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE             0x90230000
+#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE             0x90240000
+
+#define FW_MSG_SEQ_NUMBER_MASK                          0x0000ffff
+
+        u32 fw_mb_param;
+
+        u32 drv_pulse_mb;
+#define DRV_PULSE_SEQ_MASK                              0x00007fff
+#define DRV_PULSE_SYSTEM_TIME_MASK                      0xffff0000
+        /* The system time is in the format of
+         * (year-2001)*12*32 + month*32 + day. */
+#define DRV_PULSE_ALWAYS_ALIVE                          0x00008000
+        /* Indicate to the firmware not to go into the
+         * OS-absent when it is not getting driver pulse.
+         * This is used for debugging as well for PXE(MBA). */
 
-        struct port_hw_cfg       port_hw_config[FUNC_MAX];     /* 400*2=800 */
+        u32 mcp_pulse_mb;
+#define MCP_PULSE_SEQ_MASK                              0x00007fff
+#define MCP_PULSE_ALWAYS_ALIVE                          0x00008000
+        /* Indicates to the driver not to assert due to lack
+         * of MCP response */
+#define MCP_EVENT_MASK                                  0xffff0000
+#define MCP_EVENT_OTHER_DRIVER_RESET_REQ                0x00010000
 
-        struct shared_feat_cfg   shared_feature_config;                /* 4 */
+        u32 iscsi_boot_signature;
+        u32 iscsi_boot_block_offset;
 
-        struct port_feat_cfg     port_feature_config[FUNC_MAX];/* 116*2=232 */
+        u32 reserved[3];
 
 };
 
@@ -678,9 +704,8 @@ struct dev_info {						    /* size */
 /****************************************************************************
  * Management firmware state                                                *
  ****************************************************************************/
-/* Allocate 320 bytes for management firmware: still not known exactly
- * how much IMD needs. */
-#define MGMTFW_STATE_WORD_SIZE                              80
+/* Allocate 440 bytes for management firmware */
+#define MGMTFW_STATE_WORD_SIZE                              110
 
 struct mgmtfw_state {
         u32 opaque[MGMTFW_STATE_WORD_SIZE];
@@ -691,31 +716,40 @@ struct mgmtfw_state {
  * Shared Memory Region                                                     *
  ****************************************************************************/
 struct shmem_region {                          /*   SharedMem Offset (size) */
-        u32                 validity_map[FUNC_MAX];    /* 0x0 (4 * 2 = 0x8) */
-#define SHR_MEM_VALIDITY_PCI_CFG                    0x00000001
-#define SHR_MEM_VALIDITY_MB                         0x00000002
-#define SHR_MEM_VALIDITY_DEV_INFO                   0x00000004
+
+        u32                     validity_map[PORT_MAX];  /* 0x0 (4*2 = 0x8) */
+#define SHR_MEM_FORMAT_REV_ID                       ('A'<<24)
+#define SHR_MEM_FORMAT_REV_MASK                     0xff000000
+        /* validity bits */
+#define SHR_MEM_VALIDITY_PCI_CFG                    0x00100000
+#define SHR_MEM_VALIDITY_MB                         0x00200000
+#define SHR_MEM_VALIDITY_DEV_INFO                   0x00400000
+#define SHR_MEM_VALIDITY_RESERVED                   0x00000007
         /* One licensing bit should be set */
 #define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK     0x00000038
 #define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT    0x00000008
 #define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT  0x00000010
 #define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT       0x00000020
+        /* Active MFW */
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN         0x00000000
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI            0x00000040
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP             0x00000080
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI            0x000000c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE            0x000001c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK            0x000001c0
 
-        struct drv_fw_mb    drv_fw_mb[FUNC_MAX];     /* 0x8 (28 * 2 = 0x38) */
-
-        struct dev_info     dev_info;                       /* 0x40 (0x438) */
+        struct dev_info         dev_info;                /* 0x8     (0x438) */
 
-#ifdef _LICENSE_H
-        license_key_t       drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */
-#else /* Linux! */
-        u8                  reserved[52*FUNC_MAX];
-#endif
+        u8                      reserved[52*PORT_MAX];
 
         /* FW information (for internal FW use) */
-        u32                 fw_info_fio_offset;            /* 0x4e0 (0x4)   */
-        struct mgmtfw_state mgmtfw_state;                  /* 0x4e4 (0x140) */
+        u32                     fw_info_fio_offset;    /* 0x4a8       (0x4) */
+        struct mgmtfw_state     mgmtfw_state;          /* 0x4ac     (0x1b8) */
+
+        struct drv_port_mb      port_mb[PORT_MAX];     /* 0x664 (16*2=0x20) */
+        struct drv_func_mb      func_mb[FUNC_MAX];     /* 0x684 (44*2=0x58) */
 
-};                                                         /* 0x624 */
+};                                                     /* 0x6dc */
 
 
 #define BCM_5710_FW_MAJOR_VERSION                       4
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 04f93bff2ef4..dcaecc53bdb1 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,6 +1,6 @@
 /* bnx2x_init.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -409,7 +409,7 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
 
         pci_read_config_word(bp->pdev,
                              bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val);
-        DP(NETIF_MSG_HW, "read 0x%x from devctl\n", val);
+        DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val);
         w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
         r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12);
 
@@ -472,10 +472,14 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
         REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
 
         REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
-        REG_WR(bp, PXP2_REG_RQ_WR_MBS0 + 8, w_order);
+        REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
         REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
-        REG_WR(bp, PXP2_REG_RQ_RD_MBS0 + 8, r_order);
+        REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
 
+        if (r_order == MAX_RD_ORD)
+                REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+        REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
         REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16);
 }
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 86055297ab02..5a1aa0b55044 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1,6 +1,6 @@
 /* bnx2x_reg.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
 #define BRB1_REG_BRB1_INT_STS                                    0x6011c
 /* [RW 4] Parity mask register #0 read/write */
 #define BRB1_REG_BRB1_PRTY_MASK                                  0x60138
+/* [R 4] Parity register #0 read */
+#define BRB1_REG_BRB1_PRTY_STS                                   0x6012c
 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
    address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
    BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
@@ -281,6 +283,8 @@
 #define CDU_REG_CDU_INT_STS                                      0x101030
 /* [RW 5] Parity mask register #0 read/write */
 #define CDU_REG_CDU_PRTY_MASK                                    0x10104c
+/* [R 5] Parity register #0 read */
+#define CDU_REG_CDU_PRTY_STS                                     0x101040
 /* [RC 32] logging of error data in case of a CDU load error:
    {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
    ype_error; ctual_active; ctual_compressed_context}; */
@@ -308,6 +312,8 @@
 #define CFC_REG_CFC_INT_STS_CLR                                  0x104100
 /* [RW 4] Parity mask register #0 read/write */
 #define CFC_REG_CFC_PRTY_MASK                                    0x104118
+/* [R 4] Parity register #0 read */
+#define CFC_REG_CFC_PRTY_STS                                     0x10410c
 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
 #define CFC_REG_CID_CAM                                          0x104800
 #define CFC_REG_CONTROL0                                         0x104028
@@ -354,6 +360,8 @@
 #define CSDM_REG_CSDM_INT_MASK_1                                 0xc22ac
 /* [RW 11] Parity mask register #0 read/write */
 #define CSDM_REG_CSDM_PRTY_MASK                                  0xc22bc
+/* [R 11] Parity register #0 read */
+#define CSDM_REG_CSDM_PRTY_STS                                   0xc22b0
 #define CSDM_REG_ENABLE_IN1                                      0xc2238
 #define CSDM_REG_ENABLE_IN2                                      0xc223c
 #define CSDM_REG_ENABLE_OUT1                                     0xc2240
@@ -438,6 +446,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define CSEM_REG_CSEM_PRTY_MASK_0                                0x200130
 #define CSEM_REG_CSEM_PRTY_MASK_1                                0x200140
+/* [R 32] Parity register #0 read */
+#define CSEM_REG_CSEM_PRTY_STS_0                                 0x200124
+#define CSEM_REG_CSEM_PRTY_STS_1                                 0x200134
 #define CSEM_REG_ENABLE_IN                                       0x2000a4
 #define CSEM_REG_ENABLE_OUT                                      0x2000a8
 /* [RW 32] This address space contains all registers and memories that are
@@ -526,6 +537,8 @@
 #define CSEM_REG_TS_9_AS                                         0x20005c
 /* [RW 1] Parity mask register #0 read/write */
 #define DBG_REG_DBG_PRTY_MASK                                    0xc0a8
+/* [R 1] Parity register #0 read */
+#define DBG_REG_DBG_PRTY_STS                                     0xc09c
 /* [RW 2] debug only: These bits indicate the credit for PCI request type 4
    interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are
    configured */
@@ -543,6 +556,8 @@
 #define DMAE_REG_DMAE_INT_MASK                                   0x102054
 /* [RW 4] Parity mask register #0 read/write */
 #define DMAE_REG_DMAE_PRTY_MASK                                  0x102064
+/* [R 4] Parity register #0 read */
+#define DMAE_REG_DMAE_PRTY_STS                                   0x102058
 /* [RW 1] Command 0 go. */
 #define DMAE_REG_GO_C0                                           0x102080
 /* [RW 1] Command 1 go. */
@@ -623,6 +638,8 @@
 #define DORQ_REG_DORQ_INT_STS_CLR                                0x170178
 /* [RW 2] Parity mask register #0 read/write */
 #define DORQ_REG_DORQ_PRTY_MASK                                  0x170190
+/* [R 2] Parity register #0 read */
+#define DORQ_REG_DORQ_PRTY_STS                                   0x170184
 /* [RW 8] The address to write the DPM CID to STORM. */
 #define DORQ_REG_DPM_CID_ADDR                                    0x170044
 /* [RW 5] The DPM mode CID extraction offset. */
@@ -692,6 +709,8 @@
 #define HC_REG_CONFIG_1                                          0x108004
 /* [RW 3] Parity mask register #0 read/write */
 #define HC_REG_HC_PRTY_MASK                                      0x1080a0
+/* [R 3] Parity register #0 read */
+#define HC_REG_HC_PRTY_STS                                       0x108094
 /* [RW 17] status block interrupt mask; one in each bit means unmask; zerow
    in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1...
    bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */
@@ -1127,6 +1146,7 @@
 #define MISC_REG_AEU_GENERAL_ATTN_17                             0xa044
 #define MISC_REG_AEU_GENERAL_ATTN_18                             0xa048
 #define MISC_REG_AEU_GENERAL_ATTN_19                             0xa04c
+#define MISC_REG_AEU_GENERAL_ATTN_10                             0xa028
 #define MISC_REG_AEU_GENERAL_ATTN_11                             0xa02c
 #define MISC_REG_AEU_GENERAL_ATTN_2                              0xa008
 #define MISC_REG_AEU_GENERAL_ATTN_20                             0xa050
@@ -1135,6 +1155,9 @@
 #define MISC_REG_AEU_GENERAL_ATTN_4                              0xa010
 #define MISC_REG_AEU_GENERAL_ATTN_5                              0xa014
 #define MISC_REG_AEU_GENERAL_ATTN_6                              0xa018
+#define MISC_REG_AEU_GENERAL_ATTN_7                              0xa01c
+#define MISC_REG_AEU_GENERAL_ATTN_8                              0xa020
+#define MISC_REG_AEU_GENERAL_ATTN_9                              0xa024
 /* [RW 32] first 32b for inverting the input for function 0; for each bit:
    0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
    function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
@@ -1183,6 +1206,40 @@
    starts at 0x0 for the A0 tape-out and increments by one for each
    all-layer tape-out. */
 #define MISC_REG_CHIP_REV                                        0xa40c
+/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32
+   clients. Each client can be controlled by one driver only. One in each
+   bit represent that this driver control the appropriate client (Ex: bit 5
+   is set means this driver control client number 5). addr1 = set; addr0 =
+   clear; read from both addresses will give the same result = status. write
+   to address 1 will set a request to control all the clients that their
+   appropriate bit (in the write command) is set. if the client is free (the
+   appropriate bit in all the other drivers is clear) one will be written to
+   that driver register; if the client isn't free the bit will remain zero.
+   if the appropriate bit is set (the driver request to gain control on a
+   client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+   interrupt will be asserted). write to address 0 will set a request to
+   free all the clients that their appropriate bit (in the write command) is
+   set. if the appropriate bit is clear (the driver request to free a client
+   it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+   be asserted). */
+#define MISC_REG_DRIVER_CONTROL_1                                0xa510
+/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
+   these bits is written as a '1'; the corresponding SPIO bit will turn off
+   it's drivers and become an input. This is the reset state of all GPIO
+   pins. The read value of these bits will be a '1' if that last command
+   (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
+   [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
+   as a '1'; the corresponding GPIO bit will drive low. The read value of
+   these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
+   this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
+   SET When any of these bits is written as a '1'; the corresponding GPIO
+   bit will drive high (if it has that capability). The read value of these
+   bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
+   bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
+   RO; These bits indicate the read value of each of the eight GPIO pins.
+   This is the result value of the pin; not the drive value. Writing these
+   bits will have not effect. */
+#define MISC_REG_GPIO                                            0xa490
 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
    access that does not finish within
    ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
@@ -1223,6 +1280,8 @@
 #define MISC_REG_MISC_INT_MASK                                   0xa388
 /* [RW 1] Parity mask register #0 read/write */
 #define MISC_REG_MISC_PRTY_MASK                                  0xa398
+/* [R 1] Parity register #0 read */
+#define MISC_REG_MISC_PRTY_STS                                   0xa38c
 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
    inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
    divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
@@ -1264,6 +1323,55 @@
 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
    shared with the driver resides */
 #define MISC_REG_SHARED_MEM_ADDR                                 0xa2b4
+/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
+   the corresponding SPIO bit will turn off it's drivers and become an
+   input. This is the reset state of all SPIO pins. The read value of these
+   bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
+   bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
+   is written as a '1'; the corresponding SPIO bit will drive low. The read
+   value of these bits will be a '1' if that last command (#SET; #CLR; or
+#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
+   these bits is written as a '1'; the corresponding SPIO bit will drive
+   high (if it has that capability). The read value of these bits will be a
+   '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
+   (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
+   each of the eight SPIO pins. This is the result value of the pin; not the
+   drive value. Writing these bits will have not effect. Each 8 bits field
+   is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
+   from VAUX. (This is an output pin only; the FLOAT field is not applicable
+   for this pin); [1] VAUX Disable; when pulsed low; disables supply form
+   VAUX. (This is an output pin only; FLOAT field is not applicable for this
+   pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
+   select VAUX supply. (This is an output pin only; it is not controlled by
+   the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
+   field is not applicable for this pin; only the VALUE fields is relevant -
+   it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6]
+   Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
+   device ID select; read by UMP firmware. */
+#define MISC_REG_SPIO                                            0xa4fc
+/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
+   according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
+   [7:0] reserved */
+#define MISC_REG_SPIO_EVENT_EN                                   0xa2b8
+/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
+   corresponding bit in the #OLD_VALUE register. This will acknowledge an
+   interrupt on the falling edge of corresponding SPIO input (reset value
+   0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
+   in the #OLD_VALUE register. This will acknowledge an interrupt on the
+   rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
+   RO; These bits indicate the old value of the SPIO input value. When the
+   ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
+   that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
+   to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
+   interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
+   RO; These bits indicate the current SPIO interrupt state for each SPIO
+   pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
+   command bit is written. This bit is set when the SPIO input does not
+   match the current value in #OLD_VALUE (reset value 0). */
+#define MISC_REG_SPIO_INT                                        0xa500
+/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
+   loaded; 0-prepare; -unprepare */
+#define MISC_REG_UNPREPARED                                      0xa424
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT      (0x1<<0)
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS    (0x1<<9)
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G          (0x1<<15)
@@ -1392,6 +1500,9 @@
 #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC                         0x10044
 /* [RW 1] Input enable for RX PBF LP IF */
 #define NIG_REG_PBF_LB_IN_EN                                     0x100b4
+/* [RW 1] Value of this register will be transmitted to port swap when
+   ~nig_registers_strap_override.strap_override =1 */
+#define NIG_REG_PORT_SWAP                                        0x10394
 /* [RW 1] output enable for RX parser descriptor IF */
 #define NIG_REG_PRS_EOP_OUT_EN                                   0x10104
 /* [RW 1] Input enable for RX parser request IF */
@@ -1410,6 +1521,10 @@
 #define NIG_REG_STAT2_BRB_OCTET                                  0x107e0
 #define NIG_REG_STATUS_INTERRUPT_PORT0                           0x10328
 #define NIG_REG_STATUS_INTERRUPT_PORT1                           0x1032c
+/* [RW 1] port swap mux selection. If this register equal to 0 then port
+   swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
+   ort swap is equal to ~nig_registers_port_swap.port_swap */
+#define NIG_REG_STRAP_OVERRIDE                                   0x10398
 /* [RW 1] output enable for RX_XCM0 IF */
 #define NIG_REG_XCM0_OUT_EN                                      0x100f0
 /* [RW 1] output enable for RX_XCM1 IF */
@@ -1499,6 +1614,8 @@
 #define PB_REG_PB_INT_STS                                        0x1c
 /* [RW 4] Parity mask register #0 read/write */
 #define PB_REG_PB_PRTY_MASK                                      0x38
+/* [R 4] Parity register #0 read */
+#define PB_REG_PB_PRTY_STS                                       0x2c
 #define PRS_REG_A_PRSU_20                                        0x40134
 /* [R 8] debug only: CFC load request current credit. Transaction based. */
 #define PRS_REG_CFC_LD_CURRENT_CREDIT                            0x40164
@@ -1590,6 +1707,8 @@
 #define PRS_REG_PRS_INT_STS                                      0x40188
 /* [RW 8] Parity mask register #0 read/write */
 #define PRS_REG_PRS_PRTY_MASK                                    0x401a4
+/* [R 8] Parity register #0 read */
+#define PRS_REG_PRS_PRTY_STS                                     0x40198
 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
    request message */
 #define PRS_REG_PURE_REGIONS                                     0x40024
@@ -1718,6 +1837,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define PXP2_REG_PXP2_PRTY_MASK_0                                0x120588
 #define PXP2_REG_PXP2_PRTY_MASK_1                                0x120598
+/* [R 32] Parity register #0 read */
+#define PXP2_REG_PXP2_PRTY_STS_0                                 0x12057c
+#define PXP2_REG_PXP2_PRTY_STS_1                                 0x12058c
 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
    indication about backpressure) */
 #define PXP2_REG_RD_ALMOST_FULL_0                                0x120424
@@ -1911,6 +2033,8 @@
 #define PXP2_REG_RQ_HC_ENDIAN_M                                  0x1201a8
 /* [WB 53] Onchip address table */
 #define PXP2_REG_RQ_ONCHIP_AT                                    0x122000
+/* [RW 13] Pending read limiter threshold; in Dwords */
+#define PXP2_REG_RQ_PDR_LIMIT                                    0x12033c
 /* [RW 2] Endian mode for qm */
 #define PXP2_REG_RQ_QM_ENDIAN_M                                  0x120194
 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
@@ -1921,6 +2045,9 @@
 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
 #define PXP2_REG_RQ_RD_MBS0                                      0x120160
+/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
+   001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
+#define PXP2_REG_RQ_RD_MBS1                                      0x120168
 /* [RW 2] Endian mode for src */
 #define PXP2_REG_RQ_SRC_ENDIAN_M                                 0x12019c
 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
@@ -2000,10 +2127,17 @@
 /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
    001:256B; 010: 512B; */
 #define PXP2_REG_RQ_WR_MBS0                                      0x12015c
+/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
+   001:256B; 010: 512B; */
+#define PXP2_REG_RQ_WR_MBS1                                      0x120164
 /* [RW 10] if Number of entries in dmae fifo will be higer than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_DMAE_TH                                      0x120368
+/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+   threshold then has_payload indication will be asserted; the default value
+   should be equal to &gt;  write MBS size! */
+#define PXP2_REG_WR_USDMDP_TH                                    0x120348
 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
 #define PXP_REG_HST_ARB_IS_IDLE                                  0x103004
 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
@@ -2021,6 +2155,8 @@
 #define PXP_REG_PXP_INT_STS_CLR_0                                0x10306c
 /* [RW 26] Parity mask register #0 read/write */
 #define PXP_REG_PXP_PRTY_MASK                                    0x103094
+/* [R 26] Parity register #0 read */
+#define PXP_REG_PXP_PRTY_STS                                     0x103088
 /* [RW 4] The activity counter initial increment value sent in the load
    request */
 #define QM_REG_ACTCTRINITVAL_0                                   0x168040
@@ -2127,6 +2263,8 @@
 #define QM_REG_QM_INT_STS                                        0x168438
 /* [RW 9] Parity mask register #0 read/write */
 #define QM_REG_QM_PRTY_MASK                                      0x168454
+/* [R 9] Parity register #0 read */
+#define QM_REG_QM_PRTY_STS                                       0x168448
 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
 #define QM_REG_QSTATUS_HIGH                                      0x16802c
 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */
@@ -2410,6 +2548,8 @@
 #define SRC_REG_SRC_INT_STS                                      0x404ac
 /* [RW 3] Parity mask register #0 read/write */
 #define SRC_REG_SRC_PRTY_MASK                                    0x404c8
+/* [R 3] Parity register #0 read */
+#define SRC_REG_SRC_PRTY_STS                                     0x404bc
 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
 #define TCM_REG_CAM_OCCUP                                        0x5017c
 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -2730,6 +2870,8 @@
 #define TSDM_REG_TSDM_INT_MASK_1                                 0x422ac
 /* [RW 11] Parity mask register #0 read/write */
 #define TSDM_REG_TSDM_PRTY_MASK                                  0x422bc
+/* [R 11] Parity register #0 read */
+#define TSDM_REG_TSDM_PRTY_STS                                   0x422b0
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define TSEM_REG_ARB_CYCLE_SIZE                                  0x180034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -2854,6 +2996,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define TSEM_REG_TSEM_PRTY_MASK_0                                0x180120
 #define TSEM_REG_TSEM_PRTY_MASK_1                                0x180130
+/* [R 32] Parity register #0 read */
+#define TSEM_REG_TSEM_PRTY_STS_0                                 0x180114
+#define TSEM_REG_TSEM_PRTY_STS_1                                 0x180124
 /* [R 5] Used to read the XX protection CAM occupancy counter. */
 #define UCM_REG_CAM_OCCUP                                        0xe0170
 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -3155,6 +3300,8 @@
 #define USDM_REG_USDM_INT_MASK_1                                 0xc42b0
 /* [RW 11] Parity mask register #0 read/write */
 #define USDM_REG_USDM_PRTY_MASK                                  0xc42c0
+/* [R 11] Parity register #0 read */
+#define USDM_REG_USDM_PRTY_STS                                   0xc42b4
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define USEM_REG_ARB_CYCLE_SIZE                                  0x300034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3279,6 +3426,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define USEM_REG_USEM_PRTY_MASK_0                                0x300130
 #define USEM_REG_USEM_PRTY_MASK_1                                0x300140
+/* [R 32] Parity register #0 read */
+#define USEM_REG_USEM_PRTY_STS_0                                 0x300124
+#define USEM_REG_USEM_PRTY_STS_1                                 0x300134
 /* [RW 2] The queue index for registration on Aux1 counter flag. */
 #define XCM_REG_AUX1_Q                                           0x20134
 /* [RW 2] Per each decision rule the queue index to register to. */
@@ -3684,6 +3834,8 @@
 #define XSDM_REG_XSDM_INT_MASK_1                                 0x1662ac
 /* [RW 11] Parity mask register #0 read/write */
 #define XSDM_REG_XSDM_PRTY_MASK                                  0x1662bc
+/* [R 11] Parity register #0 read */
+#define XSDM_REG_XSDM_PRTY_STS                                   0x1662b0
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define XSEM_REG_ARB_CYCLE_SIZE                                  0x280034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3808,6 +3960,9 @@
 /* [RW 32] Parity mask register #0 read/write */
 #define XSEM_REG_XSEM_PRTY_MASK_0                                0x280130
 #define XSEM_REG_XSEM_PRTY_MASK_1                                0x280140
+/* [R 32] Parity register #0 read */
+#define XSEM_REG_XSEM_PRTY_STS_0                                 0x280124
+#define XSEM_REG_XSEM_PRTY_STS_1                                 0x280134
 #define MCPR_NVM_ACCESS_ENABLE_EN                                (1L<<0)
 #define MCPR_NVM_ACCESS_ENABLE_WR_EN                             (1L<<1)
 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE                             (0xffffffL<<0)
@@ -3847,6 +4002,8 @@
 #define EMAC_MDIO_COMM_START_BUSY                                (1L<<29)
 #define EMAC_MDIO_MODE_AUTO_POLL                                 (1L<<4)
 #define EMAC_MDIO_MODE_CLAUSE_45                                 (1L<<31)
+#define EMAC_MDIO_MODE_CLOCK_CNT                                 (0x3fL<<16)
+#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT                        16
 #define EMAC_MODE_25G_MODE                                       (1L<<5)
 #define EMAC_MODE_ACPI_RCVD                                      (1L<<20)
 #define EMAC_MODE_HALF_DUPLEX                                    (1L<<1)
@@ -3874,6 +4031,17 @@
 #define EMAC_RX_MTU_SIZE_JUMBO_ENA                               (1L<<31)
 #define EMAC_TX_MODE_EXT_PAUSE_EN                                (1L<<3)
 #define EMAC_TX_MODE_RESET                                       (1L<<0)
+#define MISC_REGISTERS_GPIO_1                                    1
+#define MISC_REGISTERS_GPIO_2                                    2
+#define MISC_REGISTERS_GPIO_3                                    3
+#define MISC_REGISTERS_GPIO_CLR_POS                              16
+#define MISC_REGISTERS_GPIO_FLOAT                                (0xffL<<24)
+#define MISC_REGISTERS_GPIO_FLOAT_POS                            24
+#define MISC_REGISTERS_GPIO_INPUT_HI_Z                           2
+#define MISC_REGISTERS_GPIO_OUTPUT_HIGH                          1
+#define MISC_REGISTERS_GPIO_OUTPUT_LOW                           0
+#define MISC_REGISTERS_GPIO_PORT_SHIFT                           4
+#define MISC_REGISTERS_GPIO_SET_POS                              8
 #define MISC_REGISTERS_RESET_REG_1_CLEAR                         0x588
 #define MISC_REGISTERS_RESET_REG_1_SET                           0x584
 #define MISC_REGISTERS_RESET_REG_2_CLEAR                         0x598
@@ -3891,6 +4059,25 @@
 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW    (0x1<<4)
 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
 #define MISC_REGISTERS_RESET_REG_3_SET                           0x5a4
+#define MISC_REGISTERS_SPIO_4                                    4
+#define MISC_REGISTERS_SPIO_5                                    5
+#define MISC_REGISTERS_SPIO_7                                    7
+#define MISC_REGISTERS_SPIO_CLR_POS                              16
+#define MISC_REGISTERS_SPIO_FLOAT                                (0xffL<<24)
+#define GRC_MISC_REGISTERS_SPIO_FLOAT7                           0x80000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT6                           0x40000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT5                           0x20000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT4                           0x10000000
+#define MISC_REGISTERS_SPIO_FLOAT_POS                            24
+#define MISC_REGISTERS_SPIO_INPUT_HI_Z                           2
+#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS                      16
+#define MISC_REGISTERS_SPIO_OUTPUT_HIGH                          1
+#define MISC_REGISTERS_SPIO_OUTPUT_LOW                           0
+#define MISC_REGISTERS_SPIO_SET_POS                              8
+#define HW_LOCK_MAX_RESOURCE_VALUE                               31
+#define HW_LOCK_RESOURCE_8072_MDIO                               0
+#define HW_LOCK_RESOURCE_GPIO                                    1
+#define HW_LOCK_RESOURCE_SPIO                                    2
 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR                 (1<<18)
 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT                 (1<<31)
 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT                 (1<<9)
@@ -3918,6 +4105,7 @@
 #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT                  (1<<3)
 #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR                  (1<<2)
 #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR            (1<<22)
+#define AEU_INPUTS_ATTN_BITS_SPIO5                            (1<<15)
 #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT                 (1<<27)
 #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT              (1<<5)
 #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT                (1<<25)
@@ -4206,6 +4394,9 @@
 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE        0x4000
 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP                     0x11
 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE              0x8000
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G               0x14
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS      0x0001
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS    0x0010
 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE                 0x15
 
 #define MDIO_REG_BANK_GP_STATUS                         0x8120
@@ -4362,11 +4553,13 @@
 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE   0x0001
 
 
+#define EXT_PHY_AUTO_NEG_DEVAD                          0x7
 #define EXT_PHY_OPT_PMA_PMD_DEVAD                       0x1
 #define EXT_PHY_OPT_WIS_DEVAD                           0x2
 #define EXT_PHY_OPT_PCS_DEVAD                           0x3
 #define EXT_PHY_OPT_PHY_XS_DEVAD                        0x4
 #define EXT_PHY_OPT_CNTL                                0x0
+#define EXT_PHY_OPT_CNTL2                               0x7
 #define EXT_PHY_OPT_PMD_RX_SD                           0xa
 #define EXT_PHY_OPT_PMD_MISC_CNTL                       0xca0a
 #define EXT_PHY_OPT_PHY_IDENTIFIER                      0xc800
@@ -4378,11 +4571,24 @@
 #define EXT_PHY_OPT_LASI_STATUS                         0x9005
 #define EXT_PHY_OPT_PCS_STATUS                          0x0020
 #define EXT_PHY_OPT_XGXS_LANE_STATUS                    0x0018
+#define EXT_PHY_OPT_AN_LINK_STATUS                      0x8304
+#define EXT_PHY_OPT_AN_CL37_CL73                        0x8370
+#define EXT_PHY_OPT_AN_CL37_FD                          0xffe4
+#define EXT_PHY_OPT_AN_CL37_AN                          0xffe0
+#define EXT_PHY_OPT_AN_ADV                              0x11
 
 #define EXT_PHY_KR_PMA_PMD_DEVAD                        0x1
 #define EXT_PHY_KR_PCS_DEVAD                            0x3
 #define EXT_PHY_KR_AUTO_NEG_DEVAD                       0x7
 #define EXT_PHY_KR_CTRL                                 0x0000
+#define EXT_PHY_KR_STATUS                               0x0001
+#define EXT_PHY_KR_AUTO_NEG_COMPLETE                    0x0020
+#define EXT_PHY_KR_AUTO_NEG_ADVERT                      0x0010
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE                0x0400
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC     0x0800
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH           0x0C00
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK           0x0C00
+#define EXT_PHY_KR_LP_AUTO_NEG                          0x0013
 #define EXT_PHY_KR_CTRL2                                0x0007
 #define EXT_PHY_KR_PCS_STATUS                           0x0020
 #define EXT_PHY_KR_PMD_CTRL                             0x0096
@@ -4391,4 +4597,8 @@
 #define EXT_PHY_KR_MISC_CTRL1                           0xca85
 #define EXT_PHY_KR_GEN_CTRL                             0xca10
 #define EXT_PHY_KR_ROM_CODE                             0xca19
+#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP                0x0188
+#define EXT_PHY_KR_ROM_MICRO_RESET                      0x018a
+
+#define EXT_PHY_SFX7101_XGXS_TEST1          0xc00a
 
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 571750975137..348371fda597 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -172,30 +172,30 @@ static char version[] __initdata =
    them to system IRQ numbers. This mapping is card specific and is set to
    the configuration of the Cirrus Eval board for this chip. */
 #ifdef CONFIG_ARCH_CLPS7500
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
 static unsigned int cs8900_irq_map[] = {12,0,0,0};
 #elif defined(CONFIG_SH_HICOSH4)
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x0300, 0};
 static unsigned int cs8900_irq_map[] = {1,0,0,0};
 #elif defined(CONFIG_MACH_IXDP2351)
-static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
 #include <asm/irq.h>
 #elif defined(CONFIG_ARCH_IXDP2X01)
 #include <asm/irq.h>
-static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
 #elif defined(CONFIG_ARCH_PNX010X)
 #include <asm/irq.h>
 #include <asm/arch/gpio.h>
 #define CIRRUS_DEFAULT_BASE     IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)      /* = Physical address 0x48200000 */
 #define CIRRUS_DEFAULT_IRQ      VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
-static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
 #else
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
 static unsigned int cs8900_irq_map[] = {10,11,12,5};
 #endif
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 3beace55b58d..7fe20310eb5f 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -438,7 +438,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw)
  *  For non-82573 silicon, write data to EEPROM at offset using SPI interface.
  *
  *  If e1000e_update_nvm_checksum is not called after this function, the
- *  EEPROM will most likley contain an invalid checksum.
+ *  EEPROM will most likely contain an invalid checksum.
  **/
 static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
                                  u16 *data)
@@ -547,7 +547,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
  *  poll for completion.
  *
  *  If e1000e_update_nvm_checksum is not called after this function, the
- *  EEPROM will most likley contain an invalid checksum.
+ *  EEPROM will most likely contain an invalid checksum.
  **/
 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
                                       u16 words, u16 *data)
@@ -1053,7 +1053,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
                 /* If SerDes loopback mode is entered, there is no form
                  * of reset to take the adapter out of that mode.  So we
                  * have to explicitly take the adapter out of loopback
-                 * mode.  This prevents drivers from twidling their thumbs
+                 * mode.  This prevents drivers from twiddling their thumbs
                  * if another tool failed to take it out of loopback mode.
                  */
                 ew32(SCTL,
@@ -1098,7 +1098,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
  *  e1000e_get_laa_state_82571 - Get locally administered address state
  *  @hw: pointer to the HW structure
  *
- *  Retrieve and return the current locally administed address state.
+ *  Retrieve and return the current locally administered address state.
  **/
 bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
 {
@@ -1113,7 +1113,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *  @state: enable/disable locally administered address
  *
- *  Enable/Disable the current locally administed address state.
+ *  Enable/Disable the current locally administers address state.
  **/
 void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
 {
@@ -1281,16 +1281,6 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
 
 static struct e1000_nvm_operations e82571_nvm_ops = {
         .acquire_nvm            = e1000_acquire_nvm_82571,
-        .read_nvm               = e1000e_read_nvm_spi,
-        .release_nvm            = e1000_release_nvm_82571,
-        .update_nvm             = e1000_update_nvm_checksum_82571,
-        .valid_led_default      = e1000_valid_led_default_82571,
-        .validate_nvm           = e1000_validate_nvm_checksum_82571,
-        .write_nvm              = e1000_write_nvm_82571,
-};
-
-static struct e1000_nvm_operations e82573_nvm_ops = {
-        .acquire_nvm            = e1000_acquire_nvm_82571,
         .read_nvm               = e1000e_read_nvm_eerd,
         .release_nvm            = e1000_release_nvm_82571,
         .update_nvm             = e1000_update_nvm_checksum_82571,
@@ -1355,6 +1345,6 @@ struct e1000_info e1000_82573_info = {
         .get_invariants         = e1000_get_invariants_82571,
         .mac_ops                = &e82571_mac_ops,
         .phy_ops                = &e82_phy_ops_m88,
-        .nvm_ops                = &e82573_nvm_ops,
+        .nvm_ops                = &e82571_nvm_ops,
 };
 
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 6232c3e96689..a4f511f549f7 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -66,7 +66,7 @@
 #define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
 
 /* Extended Device Control */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
 #define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
 #define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@@ -75,12 +75,12 @@
 #define E1000_CTRL_EXT_IAME           0x08000000 /* Interrupt acknowledge Auto-mask */
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000 /* Clear Interrupt timers after IMS clear */
 
-/* Receive Decriptor bit definitions */
+/* Receive Descriptor bit definitions */
 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
 #define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
 #define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
 #define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum caculated */
+#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
 #define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
 #define E1000_RXD_ERR_CE        0x01    /* CRC Error */
 #define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
@@ -223,7 +223,7 @@
 #define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
 
-/* Constants used to intrepret the masked PCI-X bus speed. */
+/* Constants used to interpret the masked PCI-X bus speed. */
 
 #define HALF_DUPLEX 1
 #define FULL_DUPLEX 2
@@ -517,7 +517,7 @@
 /* PHY 1000 MII Register/Bit Definitions */
 /* PHY Registers defined by IEEE */
 #define PHY_CONTROL      0x00 /* Control Register */
-#define PHY_STATUS       0x01 /* Status Regiser */
+#define PHY_STATUS       0x01 /* Status Register */
 #define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
 #define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
 #define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 8b88c226e858..327c0620da31 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -42,8 +42,7 @@
 struct e1000_info;
 
 #define ndev_printk(level, netdev, format, arg...) \
-        printk(level "%s: %s: " format, (netdev)->dev.parent->bus_id, \
-               (netdev)->name, ## arg)
+        printk(level "%s: " format, (netdev)->name, ## arg)
 
 #ifdef DEBUG
 #define ndev_dbg(netdev, format, arg...) \
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 3c5862f97dbf..916025b30fc3 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -184,7 +184,7 @@ enum e1e_registers {
         E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */
         E1000_ICRXOC   = 0x04124, /* Irq Cause Receiver Overrun Count */
         E1000_RXCSUM   = 0x05000, /* RX Checksum Control - RW */
-        E1000_RFCTL    = 0x05008, /* Receive Filter Control*/
+        E1000_RFCTL    = 0x05008, /* Receive Filter Control */
         E1000_MTA      = 0x05200, /* Multicast Table Array - RW Array */
         E1000_RA       = 0x05400, /* Receive Address - RW Array */
         E1000_VFTA     = 0x05600, /* VLAN Filter Table Array - RW Array */
@@ -202,7 +202,7 @@ enum e1e_registers {
         E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
         E1000_SWSM      = 0x05B50, /* SW Semaphore */
         E1000_FWSM      = 0x05B54, /* FW Semaphore */
-        E1000_HICR      = 0x08F00, /* Host Inteface Control */
+        E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
 /* RSS registers */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 8f8139de1f48..0ae39550768d 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -671,7 +671,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
  *  e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY
  *  @hw: pointer to the HW structure
  *
- *  Polarity is determined on the polarity reveral feature being enabled.
+ *  Polarity is determined on the polarity reversal feature being enabled.
  *  This function is only called by other family-specific
  *  routines.
  **/
@@ -947,7 +947,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
         /* Either we should have a hardware SPI cycle in progress
          * bit to check against, in order to start a new cycle or
          * FDONE bit should be changed in the hardware so that it
-         * is 1 after harware reset, which can then be used as an
+         * is 1 after hardware reset, which can then be used as an
          * indication whether a cycle is in progress or has been
          * completed.
          */
@@ -1155,7 +1155,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
  *  which writes the checksum to the shadow ram.  The changes in the shadow
  *  ram are then committed to the EEPROM by processing each bank at a time
  *  checking for the modified bit and writing only the pending changes.
- *  After a succesful commit, the shadow ram is cleared and is ready for
+ *  After a successful commit, the shadow ram is cleared and is ready for
  *  future writes.
  **/
 static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
@@ -1680,7 +1680,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
  *   - initialize LED identification
  *   - setup receive address registers
  *   - setup flow control
- *   - setup transmit discriptors
+ *   - setup transmit descriptors
  *   - clear statistics
  **/
 static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
@@ -1961,7 +1961,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
                      E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
         ew32(PHY_CTRL, phy_ctrl);
 
-        /* Call gig speed drop workaround on Giga disable before accessing
+        /* Call gig speed drop workaround on Gig disable before accessing
          * any PHY registers */
         e1000e_gig_downshift_workaround_ich8lan(hw);
 
@@ -1972,7 +1972,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
 /**
  *  e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state
  *  @hw: pointer to the HW structure
- *  @state: boolean value used to set the current Kumaran workaround state
+ *  @state: boolean value used to set the current Kumeran workaround state
  *
  *  If ICH8, set the current Kumeran workaround state (enabled - TRUE
  *  /disabled - FALSE).
@@ -2017,7 +2017,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
                         E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
                 ew32(PHY_CTRL, reg);
 
-                /* Call gig speed drop workaround on Giga disable before
+                /* Call gig speed drop workaround on Gig disable before
                  * accessing any PHY registers */
                 if (hw->mac.type == e1000_ich8lan)
                         e1000e_gig_downshift_workaround_ich8lan(hw);
@@ -2045,7 +2045,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *
  *  Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
- *  LPLU, Giga disable, MDIC PHY reset):
+ *  LPLU, Gig disable, MDIC PHY reset):
  *    1) Set Kumeran Near-end loopback
  *    2) Clear Kumeran Near-end loopback
  *  Should only be called for ICH8[m] devices with IGP_3 Phy.
@@ -2089,10 +2089,10 @@ static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw)
 }
 
 /**
- *  e1000_led_on_ich8lan - Turn LED's on
+ *  e1000_led_on_ich8lan - Turn LEDs on
  *  @hw: pointer to the HW structure
  *
- *  Turn on the LED's.
+ *  Turn on the LEDs.
  **/
 static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
 {
@@ -2105,10 +2105,10 @@ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
 }
 
 /**
- *  e1000_led_off_ich8lan - Turn LED's off
+ *  e1000_led_off_ich8lan - Turn LEDs off
  *  @hw: pointer to the HW structure
  *
- *  Turn off the LED's.
+ *  Turn off the LEDs.
  **/
 static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
 {
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 16f35fadb74b..95f75a43c9f9 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -589,9 +589,6 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
         s32 ret_val;
         u16 nvm_data;
 
-        if (mac->fc != e1000_fc_default)
-                return 0;
-
         /* Read and store word 0x0F of the EEPROM. This word contains bits
          * that determine the hardware's default PAUSE (flow control) mode,
          * a bit that determines whether the HW defaults to enabling or
@@ -1107,34 +1104,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
                          (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                         mac->fc = e1000_fc_rx_pause;
                         hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
-                }
-                /* Per the IEEE spec, at this point flow control should be
-                 * disabled.  However, we want to consider that we could
-                 * be connected to a legacy switch that doesn't advertise
-                 * desired flow control, but can be forced on the link
-                 * partner.  So if we advertised no flow control, that is
-                 * what we will resolve to.  If we advertised some kind of
-                 * receive capability (Rx Pause Only or Full Flow Control)
-                 * and the link partner advertised none, we will configure
-                 * ourselves to enable Rx Flow Control only.  We can do
-                 * this safely for two reasons:  If the link partner really
-                 * didn't want flow control enabled, and we enable Rx, no
-                 * harm done since we won't be receiving any PAUSE frames
-                 * anyway.  If the intent on the link partner was to have
-                 * flow control enabled, then by us enabling RX only, we
-                 * can at least receive pause frames and process them.
-                 * This is a good idea because in most cases, since we are
-                 * predominantly a server NIC, more times than not we will
-                 * be asked to delay transmission of packets than asking
-                 * our link partner to pause transmission of frames.
-                 */
-                else if ((mac->original_fc == e1000_fc_none) ||
-                         (mac->original_fc == e1000_fc_tx_pause)) {
+                } else {
+                        /*
+                         * Per the IEEE spec, at this point flow control
+                         * should be disabled.
+                         */
                         mac->fc = e1000_fc_none;
                         hw_dbg(hw, "Flow Control = NONE.\r\n");
-                } else {
-                        mac->fc = e1000_fc_rx_pause;
-                        hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
                 }
 
                 /* Now we need to do one last check...  If we auto-
@@ -1164,7 +1140,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex
+ *  e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
  *  @speed: stores the current speed
  *  @duplex: stores the current duplex
@@ -1200,7 +1176,7 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
 }
 
 /**
- *  e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex
+ *  e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
  *  @speed: stores the current speed
  *  @duplex: stores the current duplex
@@ -1410,7 +1386,7 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
  *  e1000e_blink_led - Blink LED
  *  @hw: pointer to the HW structure
  *
- *  Blink the led's which are set to be on.
+ *  Blink the LEDs which are set to be on.
  **/
 s32 e1000e_blink_led(struct e1000_hw *hw)
 {
@@ -1515,7 +1491,7 @@ void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
  *  @hw: pointer to the HW structure
  *
  *  Returns 0 if successful, else returns -10
- *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued
+ *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
  *  the master requests to be disabled.
  *
  *  Disables PCI-Express master access and verifies there are no pending
@@ -1876,7 +1852,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_read_nvm_spi - Read EEPROM's using SPI
+ *  e1000e_read_nvm_spi - Reads EEPROM using SPI
  *  @hw: pointer to the HW structure
  *  @offset: offset of word in the EEPROM to read
  *  @words: number of words to read
@@ -1980,7 +1956,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
  *  Writes data to EEPROM at offset using SPI interface.
  *
  *  If e1000e_update_nvm_checksum is not called after this function , the
- *  EEPROM will most likley contain an invalid checksum.
+ *  EEPROM will most likely contain an invalid checksum.
  **/
 s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
@@ -2222,7 +2198,7 @@ static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
  *
  *  Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
  *
- *  This function checks whether the HOST IF is enabled for command operaton
+ *  This function checks whether the HOST IF is enabled for command operation
  *  and also checks whether the previous command is completed.  It busy waits
  *  in case of previous command is not completed.
  **/
@@ -2254,7 +2230,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_check_mng_mode - check managament mode
+ *  e1000e_check_mng_mode - check management mode
  *  @hw: pointer to the HW structure
  *
  *  Reads the firmware semaphore register and returns true (>0) if
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3031d6d16247..fc5c63f4f578 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1006,7 +1006,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
  * e1000_get_hw_control - get control of the h/w from f/w
  * @adapter: address of board private structure
  *
- * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that
  * the driver is loaded. For AMT version (only with 82573)
  * of the f/w this means that the network i/f is open.
@@ -1032,7 +1032,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
  * e1000_release_hw_control - release control of the h/w to f/w
  * @adapter: address of board private structure
  *
- * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
  * For ASF and Pass Through versions of f/w this means that the
  * driver is no longer loaded. For AMT version (only with 82573) i
  * of the f/w this means that the network i/f is closed.
@@ -1241,6 +1241,11 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
 
 /**
  * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
  *      Stores a new ITR value based on packets and byte
  *      counts during the last interrupt.  The advantage of per interrupt
  *      computation is faster updates and more accurate ITR for the current
@@ -1250,10 +1255,6 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
  *      while increasing bulk throughput.
  *      this functionality is controlled by the InterruptThrottleRate module
  *      parameter (see e1000_param.c)
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
  **/
 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
                                      u16 itr_setting, int packets,
@@ -1366,6 +1367,7 @@ set_itr_now:
 /**
  * e1000_clean - NAPI Rx polling callback
  * @adapter: board private structure
+ * @budget: amount of packets driver is allowed to process this poll
  **/
 static int e1000_clean(struct napi_struct *napi, int budget)
 {
@@ -2000,7 +2002,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
             e1000_check_reset_block(hw))
                 return;
 
-        /* managebility (AMT) is enabled */
+        /* manageability (AMT) is enabled */
         if (er32(MANC) & E1000_MANC_SMBUS_EN)
                 return;
 
@@ -3488,7 +3490,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 static void e1000e_disable_l1aspm(struct pci_dev *pdev)
 {
         int pos;
-        u32 cap;
         u16 val;
 
         /*
@@ -3503,7 +3504,6 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev)
          * active.
          */
         pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-        pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &cap);
         pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
         if (val & 0x2) {
                 dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index fc6fee112f1c..dab3c468a768 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -121,7 +121,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
  *  @offset: register offset to be read
  *  @data: pointer to the read data
  *
- *  Reads the MDI control regsiter in the PHY at offset and stores the
+ *  Reads the MDI control register in the PHY at offset and stores the
  *  information read to data.
  **/
 static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
@@ -1172,7 +1172,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 }
 
 /**
- *  e1000e_check_downshift - Checks whether a downshift in speed occured
+ *  e1000e_check_downshift - Checks whether a downshift in speed occurred
  *  @hw: pointer to the HW structure
  *
  *  Success returns 0, Failure returns 1
@@ -1388,8 +1388,8 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
  *
  *  The automatic gain control (agc) normalizes the amplitude of the
  *  received signal, adjusting for the attenuation produced by the
- *  cable.  By reading the AGC registers, which reperesent the
- *  cobination of course and fine gain value, the value can be put
+ *  cable.  By reading the AGC registers, which represent the
+ *  combination of course and fine gain value, the value can be put
  *  into a lookup table to obtain the approximate cable length
  *  for each channel.
  **/
@@ -1619,7 +1619,7 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
  *  Verify the reset block is not blocking us from resetting.  Acquire
  *  semaphore (if necessary) and read/set/write the device control reset
  *  bit in the PHY.  Wait the appropriate delay time for the device to
- *  reset and relase the semaphore (if necessary).
+ *  reset and release the semaphore (if necessary).
  **/
 s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 {
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 88fb53eba715..7c4ead35cfa2 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME        "ehea"
-#define DRV_VERSION     "EHEA_0083"
+#define DRV_VERSION     "EHEA_0087"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
@@ -386,6 +386,13 @@ struct ehea_port_res {
 
 
 #define EHEA_MAX_PORTS 16
+
+#define EHEA_NUM_PORTRES_FW_HANDLES    6  /* QP handle, SendCQ handle,
+                                             RecvCQ handle, EQ handle,
+                                             SendMR handle, RecvMR handle */
+#define EHEA_NUM_PORT_FW_HANDLES       1  /* EQ handle */
+#define EHEA_NUM_ADAPTER_FW_HANDLES    2  /* MR handle, NEQ handle */
+
 struct ehea_adapter {
         u64 handle;
         struct of_device *ofdev;
@@ -405,6 +412,31 @@ struct ehea_mc_list {
         u64 macaddr;
 };
 
+/* kdump support */
+struct ehea_fw_handle_entry {
+        u64 adh;               /* Adapter Handle */
+        u64 fwh;               /* Firmware Handle */
+};
+
+struct ehea_fw_handle_array {
+        struct ehea_fw_handle_entry *arr;
+        int num_entries;
+        struct semaphore lock;
+};
+
+struct ehea_bcmc_reg_entry {
+        u64 adh;               /* Adapter Handle */
+        u32 port_id;           /* Logical Port Id */
+        u8 reg_type;           /* Registration Type */
+        u64 macaddr;
+};
+
+struct ehea_bcmc_reg_array {
+        struct ehea_bcmc_reg_entry *arr;
+        int num_entries;
+        struct semaphore lock;
+};
+
 #define EHEA_PORT_UP 1
 #define EHEA_PORT_DOWN 0
 #define EHEA_PHY_LINK_UP 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index c051c7e09b9a..21af674b764e 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -35,6 +35,7 @@
 #include <linux/if_ether.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
+#include <asm/kexec.h>
 
 #include <net/ip.h>
 
@@ -98,8 +99,10 @@ static int port_name_cnt;
 static LIST_HEAD(adapter_list);
 u64 ehea_driver_flags;
 struct work_struct ehea_rereg_mr_task;
-
 struct semaphore dlpar_mem_lock;
+struct ehea_fw_handle_array ehea_fw_handles;
+struct ehea_bcmc_reg_array ehea_bcmc_regs;
+
 
 static int __devinit ehea_probe_adapter(struct of_device *dev,
                                         const struct of_device_id *id);
@@ -132,6 +135,160 @@ void ehea_dump(void *adr, int len, char *msg)
         }
 }
 
+static void ehea_update_firmware_handles(void)
+{
+        struct ehea_fw_handle_entry *arr = NULL;
+        struct ehea_adapter *adapter;
+        int num_adapters = 0;
+        int num_ports = 0;
+        int num_portres = 0;
+        int i = 0;
+        int num_fw_handles, k, l;
+
+        /* Determine number of handles */
+        list_for_each_entry(adapter, &adapter_list, list) {
+                num_adapters++;
+
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        num_ports++;
+                        num_portres += port->num_def_qps + port->num_add_tx_qps;
+                }
+        }
+
+        num_fw_handles = num_adapters * EHEA_NUM_ADAPTER_FW_HANDLES +
+                         num_ports * EHEA_NUM_PORT_FW_HANDLES +
+                         num_portres * EHEA_NUM_PORTRES_FW_HANDLES;
+
+        if (num_fw_handles) {
+                arr = kzalloc(num_fw_handles * sizeof(*arr), GFP_KERNEL);
+                if (!arr)
+                        return;  /* Keep the existing array */
+        } else
+                goto out_update;
+
+        list_for_each_entry(adapter, &adapter_list, list) {
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        for (l = 0;
+                             l < port->num_def_qps + port->num_add_tx_qps;
+                             l++) {
+                                struct ehea_port_res *pr = &port->port_res[l];
+
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->qp->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->send_cq->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->recv_cq->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->eq->fw_handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->send_mr.handle;
+                                arr[i].adh = adapter->handle;
+                                arr[i++].fwh = pr->recv_mr.handle;
+                        }
+                        arr[i].adh = adapter->handle;
+                        arr[i++].fwh = port->qp_eq->fw_handle;
+                }
+
+                arr[i].adh = adapter->handle;
+                arr[i++].fwh = adapter->neq->fw_handle;
+
+                if (adapter->mr.handle) {
+                        arr[i].adh = adapter->handle;
+                        arr[i++].fwh = adapter->mr.handle;
+                }
+        }
+
+out_update:
+        kfree(ehea_fw_handles.arr);
+        ehea_fw_handles.arr = arr;
+        ehea_fw_handles.num_entries = i;
+}
+
+static void ehea_update_bcmc_registrations(void)
+{
+        struct ehea_bcmc_reg_entry *arr = NULL;
+        struct ehea_adapter *adapter;
+        struct ehea_mc_list *mc_entry;
+        int num_registrations = 0;
+        int i = 0;
+        int k;
+
+        /* Determine number of registrations */
+        list_for_each_entry(adapter, &adapter_list, list)
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        num_registrations += 2; /* Broadcast registrations */
+
+                        list_for_each_entry(mc_entry, &port->mc_list->list,list)
+                                num_registrations += 2;
+                }
+
+        if (num_registrations) {
+                arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL);
+                if (!arr)
+                        return;  /* Keep the existing array */
+        } else
+                goto out_update;
+
+        list_for_each_entry(adapter, &adapter_list, list) {
+                for (k = 0; k < EHEA_MAX_PORTS; k++) {
+                        struct ehea_port *port = adapter->port[k];
+
+                        if (!port || (port->state != EHEA_PORT_UP))
+                                continue;
+
+                        arr[i].adh = adapter->handle;
+                        arr[i].port_id = port->logical_port_id;
+                        arr[i].reg_type = EHEA_BCMC_BROADCAST |
+                                          EHEA_BCMC_UNTAGGED;
+                        arr[i++].macaddr = port->mac_addr;
+
+                        arr[i].adh = adapter->handle;
+                        arr[i].port_id = port->logical_port_id;
+                        arr[i].reg_type = EHEA_BCMC_BROADCAST |
+                                          EHEA_BCMC_VLANID_ALL;
+                        arr[i++].macaddr = port->mac_addr;
+
+                        list_for_each_entry(mc_entry,
+                                            &port->mc_list->list, list) {
+                                arr[i].adh = adapter->handle;
+                                arr[i].port_id = port->logical_port_id;
+                                arr[i].reg_type = EHEA_BCMC_SCOPE_ALL |
+                                                  EHEA_BCMC_MULTICAST |
+                                                  EHEA_BCMC_UNTAGGED;
+                                arr[i++].macaddr = mc_entry->macaddr;
+
+                                arr[i].adh = adapter->handle;
+                                arr[i].port_id = port->logical_port_id;
+                                arr[i].reg_type = EHEA_BCMC_SCOPE_ALL |
+                                                  EHEA_BCMC_MULTICAST |
+                                                  EHEA_BCMC_VLANID_ALL;
+                                arr[i++].macaddr = mc_entry->macaddr;
+                        }
+                }
+        }
+
+out_update:
+        kfree(ehea_bcmc_regs.arr);
+        ehea_bcmc_regs.arr = arr;
+        ehea_bcmc_regs.num_entries = i;
+}
+
 static struct net_device_stats *ehea_get_stats(struct net_device *dev)
 {
         struct ehea_port *port = netdev_priv(dev);
@@ -1601,19 +1758,25 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
 
         memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
 
+        down(&ehea_bcmc_regs.lock);
+
         /* Deregister old MAC in pHYP */
         ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
         if (ret)
-                goto out_free;
+                goto out_upregs;
 
         port->mac_addr = cb0->port_mac_addr << 16;
 
         /* Register new MAC in pHYP */
         ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
         if (ret)
-                goto out_free;
+                goto out_upregs;
 
         ret = 0;
+
+out_upregs:
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
 out_free:
         kfree(cb0);
 out:
@@ -1775,9 +1938,11 @@ static void ehea_set_multicast_list(struct net_device *dev)
         }
         ehea_promiscuous(dev, 0);
 
+        down(&ehea_bcmc_regs.lock);
+
         if (dev->flags & IFF_ALLMULTI) {
                 ehea_allmulti(dev, 1);
-                return;
+                goto out;
         }
         ehea_allmulti(dev, 0);
 
@@ -1803,6 +1968,8 @@ static void ehea_set_multicast_list(struct net_device *dev)
 
         }
 out:
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
         return;
 }
 
@@ -2285,6 +2452,8 @@ static int ehea_up(struct net_device *dev)
         if (port->state == EHEA_PORT_UP)
                 return 0;
 
+        down(&ehea_fw_handles.lock);
+
         ret = ehea_port_res_setup(port, port->num_def_qps,
                                   port->num_add_tx_qps);
         if (ret) {
@@ -2321,8 +2490,17 @@ static int ehea_up(struct net_device *dev)
                 }
         }
 
-        ret = 0;
+        down(&ehea_bcmc_regs.lock);
+
+        ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+        if (ret) {
+                ret = -EIO;
+                goto out_free_irqs;
+        }
+
         port->state = EHEA_PORT_UP;
+
+        ret = 0;
         goto out;
 
 out_free_irqs:
@@ -2334,6 +2512,12 @@ out:
         if (ret)
                 ehea_info("Failed starting %s. ret=%i", dev->name, ret);
 
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
+
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
+
         return ret;
 }
 
@@ -2382,16 +2566,27 @@ static int ehea_down(struct net_device *dev)
         if (port->state == EHEA_PORT_DOWN)
                 return 0;
 
+        down(&ehea_bcmc_regs.lock);
         ehea_drop_multicast_list(dev);
+        ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+
         ehea_free_interrupts(dev);
 
+        down(&ehea_fw_handles.lock);
+
         port->state = EHEA_PORT_DOWN;
 
+        ehea_update_bcmc_registrations();
+        up(&ehea_bcmc_regs.lock);
+
         ret = ehea_clean_all_portres(port);
         if (ret)
                 ehea_info("Failed freeing resources for %s. ret=%i",
                           dev->name, ret);
 
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
+
         return ret;
 }
 
@@ -2920,19 +3115,12 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
         dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
 
         INIT_WORK(&port->reset_task, ehea_reset_port);
-
-        ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
-        if (ret) {
-                ret = -EIO;
-                goto out_unreg_port;
-        }
-
         ehea_set_ethtool_ops(dev);
 
         ret = register_netdev(dev);
         if (ret) {
                 ehea_error("register_netdev failed. ret=%d", ret);
-                goto out_dereg_bc;
+                goto out_unreg_port;
         }
 
         port->lro_max_aggr = lro_max_aggr;
@@ -2949,9 +3137,6 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 
         return port;
 
-out_dereg_bc:
-        ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
-
 out_unreg_port:
         ehea_unregister_port(port);
 
@@ -2971,7 +3156,6 @@ static void ehea_shutdown_single_port(struct ehea_port *port)
 {
         unregister_netdev(port->netdev);
         ehea_unregister_port(port);
-        ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
         kfree(port->mc_list);
         free_netdev(port->netdev);
         port->adapter->active_ports--;
@@ -3014,7 +3198,6 @@ static int ehea_setup_ports(struct ehea_adapter *adapter)
 
                 i++;
         };
-
         return 0;
 }
 
@@ -3159,6 +3342,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
                 ehea_error("Invalid ibmebus device probed");
                 return -EINVAL;
         }
+        down(&ehea_fw_handles.lock);
 
         adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
         if (!adapter) {
@@ -3239,7 +3423,10 @@ out_kill_eq:
 
 out_free_ad:
         kfree(adapter);
+
 out:
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
         return ret;
 }
 
@@ -3258,18 +3445,41 @@ static int __devexit ehea_remove(struct of_device *dev)
 
         flush_scheduled_work();
 
+        down(&ehea_fw_handles.lock);
+
         ibmebus_free_irq(adapter->neq->attr.ist1, adapter);
         tasklet_kill(&adapter->neq_tasklet);
 
         ehea_destroy_eq(adapter->neq);
         ehea_remove_adapter_mr(adapter);
         list_del(&adapter->list);
-
         kfree(adapter);
 
+        ehea_update_firmware_handles();
+        up(&ehea_fw_handles.lock);
+
         return 0;
 }
 
+void ehea_crash_handler(void)
+{
+        int i;
+
+        if (ehea_fw_handles.arr)
+                for (i = 0; i < ehea_fw_handles.num_entries; i++)
+                        ehea_h_free_resource(ehea_fw_handles.arr[i].adh,
+                                             ehea_fw_handles.arr[i].fwh,
+                                             FORCE_FREE);
+
+        if (ehea_bcmc_regs.arr)
+                for (i = 0; i < ehea_bcmc_regs.num_entries; i++)
+                        ehea_h_reg_dereg_bcmc(ehea_bcmc_regs.arr[i].adh,
+                                              ehea_bcmc_regs.arr[i].port_id,
+                                              ehea_bcmc_regs.arr[i].reg_type,
+                                              ehea_bcmc_regs.arr[i].macaddr,
+                                              0, H_DEREG_BCMC);
+}
+
 static int ehea_reboot_notifier(struct notifier_block *nb,
                                 unsigned long action, void *unused)
 {
@@ -3330,7 +3540,12 @@ int __init ehea_module_init(void)
 
 
         INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs);
+        memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles));
+        memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
+
         sema_init(&dlpar_mem_lock, 1);
+        sema_init(&ehea_fw_handles.lock, 1);
+        sema_init(&ehea_bcmc_regs.lock, 1);
 
         ret = check_module_parm();
         if (ret)
@@ -3340,12 +3555,18 @@ int __init ehea_module_init(void)
         if (ret)
                 goto out;
 
-        register_reboot_notifier(&ehea_reboot_nb);
+        ret = register_reboot_notifier(&ehea_reboot_nb);
+        if (ret)
+                ehea_info("failed registering reboot notifier");
+
+        ret = crash_shutdown_register(&ehea_crash_handler);
+        if (ret)
+                ehea_info("failed registering crash handler");
 
         ret = ibmebus_register_driver(&ehea_driver);
         if (ret) {
                 ehea_error("failed registering eHEA device driver on ebus");
-                goto out;
+                goto out2;
         }
 
         ret = driver_create_file(&ehea_driver.driver,
@@ -3353,21 +3574,33 @@ int __init ehea_module_init(void)
         if (ret) {
                 ehea_error("failed to register capabilities attribute, ret=%d",
                            ret);
-                unregister_reboot_notifier(&ehea_reboot_nb);
-                ibmebus_unregister_driver(&ehea_driver);
-                goto out;
+                goto out3;
         }
 
+        return ret;
+
+out3:
+        ibmebus_unregister_driver(&ehea_driver);
+out2:
+        unregister_reboot_notifier(&ehea_reboot_nb);
+        crash_shutdown_unregister(&ehea_crash_handler);
 out:
         return ret;
 }
 
 static void __exit ehea_module_exit(void)
 {
+        int ret;
+
         flush_scheduled_work();
         driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
         ibmebus_unregister_driver(&ehea_driver);
         unregister_reboot_notifier(&ehea_reboot_nb);
+        ret = crash_shutdown_unregister(&ehea_crash_handler);
+        if (ret)
+                ehea_info("failed unregistering crash handler");
+        kfree(ehea_fw_handles.arr);
+        kfree(ehea_bcmc_regs.arr);
         ehea_destroy_busmap();
 }
 
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 42d94edeee26..af869cf9ae7d 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -946,16 +946,11 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
         struct fs_enet_private *fep = netdev_priv(dev);
         struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data;
-        unsigned long flags;
-        int rc;
 
         if (!netif_running(dev))
                 return -EINVAL;
 
-        spin_lock_irqsave(&fep->lock, flags);
-        rc = phy_mii_ioctl(fep->phydev, mii, cmd);
-        spin_unlock_irqrestore(&fep->lock, flags);
-        return rc;
+        return phy_mii_ioctl(fep->phydev, mii, cmd);
 }
 
 extern int fs_mii_connect(struct net_device *dev);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 4244fc282f21..718cf77e345a 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -605,7 +605,7 @@ void stop_gfar(struct net_device *dev)
 
         free_skb_resources(priv);
 
-        dma_free_coherent(NULL,
+        dma_free_coherent(&dev->dev,
                         sizeof(struct txbd8)*priv->tx_ring_size
                         + sizeof(struct rxbd8)*priv->rx_ring_size,
                         priv->tx_bd_base,
@@ -626,7 +626,7 @@ static void free_skb_resources(struct gfar_private *priv)
         for (i = 0; i < priv->tx_ring_size; i++) {
 
                 if (priv->tx_skbuff[i]) {
-                        dma_unmap_single(NULL, txbdp->bufPtr,
+                        dma_unmap_single(&priv->dev->dev, txbdp->bufPtr,
                                         txbdp->length,
                                         DMA_TO_DEVICE);
                         dev_kfree_skb_any(priv->tx_skbuff[i]);
@@ -643,7 +643,7 @@ static void free_skb_resources(struct gfar_private *priv)
         if(priv->rx_skbuff != NULL) {
                 for (i = 0; i < priv->rx_ring_size; i++) {
                         if (priv->rx_skbuff[i]) {
-                                dma_unmap_single(NULL, rxbdp->bufPtr,
+                                dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr,
                                                 priv->rx_buffer_size,
                                                 DMA_FROM_DEVICE);
 
@@ -708,7 +708,7 @@ int startup_gfar(struct net_device *dev)
         gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 
         /* Allocate memory for the buffer descriptors */
-        vaddr = (unsigned long) dma_alloc_coherent(NULL,
+        vaddr = (unsigned long) dma_alloc_coherent(&dev->dev,
                         sizeof (struct txbd8) * priv->tx_ring_size +
                         sizeof (struct rxbd8) * priv->rx_ring_size,
                         &addr, GFP_KERNEL);
@@ -919,7 +919,7 @@ err_irq_fail:
 rx_skb_fail:
         free_skb_resources(priv);
 tx_skb_fail:
-        dma_free_coherent(NULL,
+        dma_free_coherent(&dev->dev,
                         sizeof(struct txbd8)*priv->tx_ring_size
                         + sizeof(struct rxbd8)*priv->rx_ring_size,
                         priv->tx_bd_base,
@@ -1053,7 +1053,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         /* Set buffer length and pointer */
         txbdp->length = skb->len;
-        txbdp->bufPtr = dma_map_single(NULL, skb->data,
+        txbdp->bufPtr = dma_map_single(&dev->dev, skb->data,
                         skb->len, DMA_TO_DEVICE);
 
         /* Save the skb pointer so we can free it later */
@@ -1332,7 +1332,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
          */
         skb_reserve(skb, alignamount);
 
-        bdp->bufPtr = dma_map_single(NULL, skb->data,
+        bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
                         priv->rx_buffer_size, DMA_FROM_DEVICE);
 
         bdp->length = 0;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index bff280eff5e3..6a1f23092099 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -439,7 +439,7 @@ static int igb_request_irq(struct igb_adapter *adapter)
                 err = igb_request_msix(adapter);
                 if (!err) {
                         /* enable IAM, auto-mask,
-                         * DO NOT USE EIAME or IAME in legacy mode */
+                         * DO NOT USE EIAM or IAM in legacy mode */
                         wr32(E1000_IAM, IMS_ENABLE_MASK);
                         goto request_done;
                 }
@@ -465,14 +465,9 @@ static int igb_request_irq(struct igb_adapter *adapter)
         err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
                           netdev->name, netdev);
 
-        if (err) {
+        if (err)
                 dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
                         err);
-                goto request_done;
-        }
-
-        /* enable IAM, auto-mask */
-        wr32(E1000_IAM, IMS_ENABLE_MASK);
 
 request_done:
         return err;
@@ -821,7 +816,8 @@ void igb_reset(struct igb_adapter *adapter)
         wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
 
         igb_reset_adaptive(&adapter->hw);
-        adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+        if (adapter->hw.phy.ops.get_phy_info)
+                adapter->hw.phy.ops.get_phy_info(&adapter->hw);
 }
 
 /**
@@ -2057,7 +2053,8 @@ static void igb_set_multi(struct net_device *netdev)
 static void igb_update_phy_info(unsigned long data)
 {
         struct igb_adapter *adapter = (struct igb_adapter *) data;
-        adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+        if (adapter->hw.phy.ops.get_phy_info)
+                adapter->hw.phy.ops.get_phy_info(&adapter->hw);
 }
 
 /**
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 53a9fd086f96..75f3a68ee354 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -67,6 +67,7 @@ static struct ixgb_stats ixgb_gstrings_stats[] = {
         {"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)},
         {"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)},
         {"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)},
+        {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
         {"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)},
         {"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)},
         {"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)},
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 81bf005ff280..1d210ed46130 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -148,7 +148,7 @@ static void macb_handle_link_change(struct net_device *dev)
 
                         if (phydev->duplex)
                                 reg |= MACB_BIT(FD);
-                        if (phydev->speed)
+                        if (phydev->speed == SPEED_100)
                                 reg |= MACB_BIT(SPD);
 
                         macb_writel(bp, NCFGR, reg);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 6323988dfa1d..fd8158a86f64 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -590,6 +590,13 @@ static int pcnet_config(struct pcmcia_device *link)
         dev->if_port = 0;
     }
 
+    if ((link->conf.ConfigBase == 0x03c0)
+        && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) {
+        printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
+        printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
+        goto failed;
+    }
+
     local_hw_info = get_hwinfo(link);
     if (local_hw_info == NULL)
         local_hw_info = get_prom(link);
@@ -1567,12 +1574,11 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
         PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
         PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
-/*      PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */
+        PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
         PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
         PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
         PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
         PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
-/*      PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */
         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6e9f619c491f..963630c65ca9 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -49,13 +49,13 @@ int mdiobus_register(struct mii_bus *bus)
         int i;
         int err = 0;
 
-        mutex_init(&bus->mdio_lock);
-
         if (NULL == bus || NULL == bus->name ||
                         NULL == bus->read ||
                         NULL == bus->write)
                 return -EINVAL;
 
+        mutex_init(&bus->mdio_lock);
+
         if (bus->reset)
                 bus->reset(bus);
 
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 750d2a99cb4f..daf5abab9534 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2690,6 +2690,7 @@ int gelic_wl_driver_probe(struct gelic_card *card)
                 return -ENOMEM;
 
         /* setup net_device structure */
+        SET_NETDEV_DEV(netdev, &card->dev->core);
         gelic_wl_setup_netdev_ops(netdev);
 
         /* setup some of net_device and register it */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 202fdf356621..20745fd4e973 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1633,13 +1633,18 @@ static inline void sis190_init_rxfilter(struct net_device *dev)
 static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, 
                                          struct net_device *dev)
 {
-        u8 from;
+        int rc;
+
+        rc = sis190_get_mac_addr_from_eeprom(pdev, dev);
+        if (rc < 0) {
+                u8 reg;
 
-        pci_read_config_byte(pdev, 0x73, &from);
+                pci_read_config_byte(pdev, 0x73, &reg);
 
-        return (from & 0x00000001) ?
-                sis190_get_mac_addr_from_apc(pdev, dev) :
-                sis190_get_mac_addr_from_eeprom(pdev, dev);
+                if (reg & 0x00000001)
+                        rc = sis190_get_mac_addr_from_apc(pdev, dev);
+        }
+        return rc;
 }
 
 static void sis190_set_speed_auto(struct net_device *dev)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 9a6295909e43..54c662690f65 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -572,8 +572,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
         default:
                 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
                 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+
                 /* turn off the Rx LED (LED_RX) */
-                ledover &= ~PHY_M_LED_MO_RX;
+                ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
         }
 
         if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
@@ -602,7 +603,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 
                 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
                         /* turn on 100 Mbps LED (LED_LINK100) */
-                        ledover |= PHY_M_LED_MO_100;
+                        ledover |= PHY_M_LED_MO_100(MO_LED_ON);
                 }
 
                 if (ledover)
@@ -3322,82 +3323,80 @@ static void sky2_set_multicast(struct net_device *dev)
 /* Can have one global because blinking is controlled by
  * ethtool and that is always under RTNL mutex
  */
-static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
+static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
 {
-        u16 pg;
+        struct sky2_hw *hw = sky2->hw;
+        unsigned port = sky2->port;
 
-        switch (hw->chip_id) {
-        case CHIP_ID_YUKON_XL:
+        spin_lock_bh(&sky2->phy_lock);
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+            hw->chip_id == CHIP_ID_YUKON_EX ||
+            hw->chip_id == CHIP_ID_YUKON_SUPR) {
+                u16 pg;
                 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
                 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
-                             on ? (PHY_M_LEDC_LOS_CTRL(1) |
-                                   PHY_M_LEDC_INIT_CTRL(7) |
-                                   PHY_M_LEDC_STA1_CTRL(7) |
-                                   PHY_M_LEDC_STA0_CTRL(7))
-                             : 0);
 
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-                break;
+                switch (mode) {
+                case MO_LED_OFF:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(8) |
+                                     PHY_M_LEDC_INIT_CTRL(8) |
+                                     PHY_M_LEDC_STA1_CTRL(8) |
+                                     PHY_M_LEDC_STA0_CTRL(8));
+                        break;
+                case MO_LED_ON:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(9) |
+                                     PHY_M_LEDC_INIT_CTRL(9) |
+                                     PHY_M_LEDC_STA1_CTRL(9) |
+                                     PHY_M_LEDC_STA0_CTRL(9));
+                        break;
+                case MO_LED_BLINK:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(0xa) |
+                                     PHY_M_LEDC_INIT_CTRL(0xa) |
+                                     PHY_M_LEDC_STA1_CTRL(0xa) |
+                                     PHY_M_LEDC_STA0_CTRL(0xa));
+                        break;
+                case MO_LED_NORM:
+                        gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+                                     PHY_M_LEDC_LOS_CTRL(1) |
+                                     PHY_M_LEDC_INIT_CTRL(8) |
+                                     PHY_M_LEDC_STA1_CTRL(7) |
+                                     PHY_M_LEDC_STA0_CTRL(7));
+                }
 
-        default:
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+        } else
                 gm_phy_write(hw, port, PHY_MARV_LED_OVER, 
-                             on ? PHY_M_LED_ALL : 0);
-        }
+                                     PHY_M_LED_MO_DUP(mode) |
+                                     PHY_M_LED_MO_10(mode) |
+                                     PHY_M_LED_MO_100(mode) |
+                                     PHY_M_LED_MO_1000(mode) |
+                                     PHY_M_LED_MO_RX(mode) |
+                                     PHY_M_LED_MO_TX(mode));
+
+        spin_unlock_bh(&sky2->phy_lock);
 }
 
 /* blink LED's for finding board */
 static int sky2_phys_id(struct net_device *dev, u32 data)
 {
         struct sky2_port *sky2 = netdev_priv(dev);
-        struct sky2_hw *hw = sky2->hw;
-        unsigned port = sky2->port;
-        u16 ledctrl, ledover = 0;
-        long ms;
-        int interrupted;
-        int onoff = 1;
+        unsigned int i;
 
-        if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
-                ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
-        else
-                ms = data * 1000;
-
-        /* save initial values */
-        spin_lock_bh(&sky2->phy_lock);
-        if (hw->chip_id == CHIP_ID_YUKON_XL) {
-                u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-        } else {
-                ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
-                ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
-        }
-
-        interrupted = 0;
-        while (!interrupted && ms > 0) {
-                sky2_led(hw, port, onoff);
-                onoff = !onoff;
-
-                spin_unlock_bh(&sky2->phy_lock);
-                interrupted = msleep_interruptible(250);
-                spin_lock_bh(&sky2->phy_lock);
-
-                ms -= 250;
-        }
+        if (data == 0)
+                data = UINT_MAX;
 
-        /* resume regularly scheduled programming */
-        if (hw->chip_id == CHIP_ID_YUKON_XL) {
-                u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-                gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
-                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
-        } else {
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-                gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+        for (i = 0; i < data; i++) {
+                sky2_led(sky2, MO_LED_ON);
+                if (msleep_interruptible(500))
+                        break;
+                sky2_led(sky2, MO_LED_OFF);
+                if (msleep_interruptible(500))
+                        break;
         }
-        spin_unlock_bh(&sky2->phy_lock);
+        sky2_led(sky2, MO_LED_NORM);
 
         return 0;
 }
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 5ab5c1c7c5aa..7bb3ba9bcbd8 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1318,18 +1318,21 @@ enum {
         BLINK_670MS     = 4,/* 670 ms */
 };
 
-/**** PHY_MARV_LED_OVER    16 bit r/w LED control */
-enum {
-        PHY_M_LED_MO_DUP  = 3<<10,/* Bit 11..10:  Duplex */
-        PHY_M_LED_MO_10   = 3<<8, /* Bit  9.. 8:  Link 10 */
-        PHY_M_LED_MO_100  = 3<<6, /* Bit  7.. 6:  Link 100 */
-        PHY_M_LED_MO_1000 = 3<<4, /* Bit  5.. 4:  Link 1000 */
-        PHY_M_LED_MO_RX   = 3<<2, /* Bit  3.. 2:  Rx */
-        PHY_M_LED_MO_TX   = 3<<0, /* Bit  1.. 0:  Tx */
-
-        PHY_M_LED_ALL     = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10 
-                            | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000
-                            | PHY_M_LED_MO_RX,
+/*****  PHY_MARV_LED_OVER       16 bit r/w      Manual LED Override Reg *****/
+#define PHY_M_LED_MO_SGMII(x)   ((x)<<14)       /* Bit 15..14:  SGMII AN Timer */
+
+#define PHY_M_LED_MO_DUP(x)     ((x)<<10)       /* Bit 11..10:  Duplex */
+#define PHY_M_LED_MO_10(x)      ((x)<<8)        /* Bit  9.. 8:  Link 10 */
+#define PHY_M_LED_MO_100(x)     ((x)<<6)        /* Bit  7.. 6:  Link 100 */
+#define PHY_M_LED_MO_1000(x)    ((x)<<4)        /* Bit  5.. 4:  Link 1000 */
+#define PHY_M_LED_MO_RX(x)      ((x)<<2)        /* Bit  3.. 2:  Rx */
+#define PHY_M_LED_MO_TX(x)      ((x)<<0)        /* Bit  1.. 0:  Tx */
+
+enum led_mode {
+        MO_LED_NORM  = 0,
+        MO_LED_BLINK = 1,
+        MO_LED_OFF   = 2,
+        MO_LED_ON    = 3,
 };
 
 /*****  PHY_MARV_EXT_CTRL_2     16 bit r/w      Ext. PHY Specific Ctrl 2 *****/
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 3af5b92b48c8..0166407d7061 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1400,7 +1400,7 @@ static void TLan_SetMulticastList( struct net_device *dev )
          *
          **************************************************************/
 
-u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
 {
         /* printk( "TLAN:  Invalid interrupt on %s.\n", dev->name ); */
         return 0;
@@ -1432,7 +1432,7 @@ u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         int             eoc = 0;
@@ -1518,7 +1518,7 @@ u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
 {
         TLan_ReadAndClearStats( dev, TLAN_RECORD );
 
@@ -1554,7 +1554,7 @@ u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u32             ack = 0;
@@ -1689,7 +1689,7 @@ u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
 {
         printk( "TLAN:  Test interrupt on %s.\n", dev->name );
         return 1;
@@ -1719,7 +1719,7 @@ u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         TLanList                *head_list;
@@ -1767,7 +1767,7 @@ u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u32             ack;
@@ -1842,7 +1842,7 @@ u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         dma_addr_t      head_list_phys;
@@ -1902,7 +1902,7 @@ u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
          *
          **************************************************************/
 
-void TLan_Timer( unsigned long data )
+static void TLan_Timer( unsigned long data )
 {
         struct net_device       *dev = (struct net_device *) data;
         TLanPrivateInfo *priv = netdev_priv(dev);
@@ -1983,7 +1983,7 @@ void TLan_Timer( unsigned long data )
          *
          **************************************************************/
 
-void TLan_ResetLists( struct net_device *dev )
+static void TLan_ResetLists( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         int             i;
@@ -2043,7 +2043,7 @@ void TLan_ResetLists( struct net_device *dev )
 } /* TLan_ResetLists */
 
 
-void TLan_FreeLists( struct net_device *dev )
+static void TLan_FreeLists( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         int             i;
@@ -2092,7 +2092,7 @@ void TLan_FreeLists( struct net_device *dev )
          *
          **************************************************************/
 
-void TLan_PrintDio( u16 io_base )
+static void TLan_PrintDio( u16 io_base )
 {
         u32 data0, data1;
         int     i;
@@ -2127,7 +2127,7 @@ void TLan_PrintDio( u16 io_base )
          *
          **************************************************************/
 
-void TLan_PrintList( TLanList *list, char *type, int num)
+static void TLan_PrintList( TLanList *list, char *type, int num)
 {
         int i;
 
@@ -2163,7 +2163,7 @@ void TLan_PrintList( TLanList *list, char *type, int num)
          *
          **************************************************************/
 
-void TLan_ReadAndClearStats( struct net_device *dev, int record )
+static void TLan_ReadAndClearStats( struct net_device *dev, int record )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u32             tx_good, tx_under;
@@ -2238,7 +2238,7 @@ void TLan_ReadAndClearStats( struct net_device *dev, int record )
          *
          **************************************************************/
 
-void
+static void
 TLan_ResetAdapter( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
@@ -2324,7 +2324,7 @@ TLan_ResetAdapter( struct net_device *dev )
 
 
 
-void
+static void
 TLan_FinishReset( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
@@ -2448,7 +2448,7 @@ TLan_FinishReset( struct net_device *dev )
          *
          **************************************************************/
 
-void TLan_SetMac( struct net_device *dev, int areg, char *mac )
+static void TLan_SetMac( struct net_device *dev, int areg, char *mac )
 {
         int i;
 
@@ -2490,7 +2490,7 @@ void TLan_SetMac( struct net_device *dev, int areg, char *mac )
          *
          ********************************************************************/
 
-void TLan_PhyPrint( struct net_device *dev )
+static void TLan_PhyPrint( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16 i, data0, data1, data2, data3, phy;
@@ -2539,7 +2539,7 @@ void TLan_PhyPrint( struct net_device *dev )
          *
          ********************************************************************/
 
-void TLan_PhyDetect( struct net_device *dev )
+static void TLan_PhyDetect( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             control;
@@ -2586,7 +2586,7 @@ void TLan_PhyDetect( struct net_device *dev )
 
 
 
-void TLan_PhyPowerDown( struct net_device *dev )
+static void TLan_PhyPowerDown( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             value;
@@ -2611,7 +2611,7 @@ void TLan_PhyPowerDown( struct net_device *dev )
 
 
 
-void TLan_PhyPowerUp( struct net_device *dev )
+static void TLan_PhyPowerUp( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             value;
@@ -2632,7 +2632,7 @@ void TLan_PhyPowerUp( struct net_device *dev )
 
 
 
-void TLan_PhyReset( struct net_device *dev )
+static void TLan_PhyReset( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             phy;
@@ -2660,7 +2660,7 @@ void TLan_PhyReset( struct net_device *dev )
 
 
 
-void TLan_PhyStartLink( struct net_device *dev )
+static void TLan_PhyStartLink( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             ability;
@@ -2747,7 +2747,7 @@ void TLan_PhyStartLink( struct net_device *dev )
 
 
 
-void TLan_PhyFinishAutoNeg( struct net_device *dev )
+static void TLan_PhyFinishAutoNeg( struct net_device *dev )
 {
         TLanPrivateInfo *priv = netdev_priv(dev);
         u16             an_adv;
@@ -2903,7 +2903,7 @@ void TLan_PhyMonitor( struct net_device *dev )
          *
          **************************************************************/
 
-int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
+static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
 {
         u8      nack;
         u16     sio, tmp;
@@ -2993,7 +2993,7 @@ int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
          *
          **************************************************************/
 
-void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
+static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
 {
         u16 sio;
         u32 i;
@@ -3035,7 +3035,7 @@ void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
          *
          **************************************************************/
 
-void TLan_MiiSync( u16 base_port )
+static void TLan_MiiSync( u16 base_port )
 {
         int i;
         u16 sio;
@@ -3074,7 +3074,7 @@ void TLan_MiiSync( u16 base_port )
          *
          **************************************************************/
 
-void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
+static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
 {
         u16     sio;
         int     minten;
@@ -3144,7 +3144,7 @@ void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
          *
          **************************************************************/
 
-void TLan_EeSendStart( u16 io_base )
+static void TLan_EeSendStart( u16 io_base )
 {
         u16     sio;
 
@@ -3184,7 +3184,7 @@ void TLan_EeSendStart( u16 io_base )
          *
          **************************************************************/
 
-int TLan_EeSendByte( u16 io_base, u8 data, int stop )
+static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
 {
         int     err;
         u8      place;
@@ -3245,7 +3245,7 @@ int TLan_EeSendByte( u16 io_base, u8 data, int stop )
          *
          **************************************************************/
 
-void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
+static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
 {
         u8  place;
         u16 sio;
@@ -3303,7 +3303,7 @@ void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
          *
          **************************************************************/
 
-int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
+static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
 {
         int err;
         TLanPrivateInfo *priv = netdev_priv(dev);
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index a7afeea156bd..a59c1f224aa8 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -482,9 +482,11 @@ static void uli526x_init(struct net_device *dev)
         struct uli526x_board_info *db = netdev_priv(dev);
         unsigned long ioaddr = db->ioaddr;
         u8      phy_tmp;
+        u8      timeout;
         u16     phy_value;
         u16 phy_reg_reset;
 
+
         ULI526X_DBUG(0, "uli526x_init()", 0);
 
         /* Reset M526x MAC controller */
@@ -509,11 +511,19 @@ static void uli526x_init(struct net_device *dev)
         /* Parser SROM and media mode */
         db->media_mode = uli526x_media_mode;
 
-        /* Phyxcer capability setting */
+        /* phyxcer capability setting */
         phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
         phy_reg_reset = (phy_reg_reset | 0x8000);
         phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
+
+        /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management
+         * functions") or phy data sheet for details on phy reset
+         */
         udelay(500);
+        timeout = 10;
+        while (timeout-- &&
+                phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000)
+                        udelay(100);
 
         /* Process Phyxcer Media Mode */
         uli526x_set_phyxcer(db);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 7c851b1e6daa..8c9d6ae2bb31 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1893,7 +1893,7 @@ static void rhine_shutdown (struct pci_dev *pdev)
 
         /* Make sure we use pattern 0, 1 and not 4, 5 */
         if (rp->quirks & rq6patterns)
-                iowrite8(0x04, ioaddr + 0xA7);
+                iowrite8(0x04, ioaddr + WOLcgClr);
 
         if (rp->wolopts & WAKE_MAGIC) {
                 iowrite8(WOLmagic, ioaddr + WOLcrSet);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index fdc23678117b..19fd4cb0ddf8 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -361,6 +361,7 @@ static int virtnet_probe(struct virtio_device *vdev)
         netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight);
         vi->dev = dev;
         vi->vdev = vdev;
+        vdev->priv = vi;
 
         /* We expect two virtqueues, receive then send. */
         vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
@@ -395,7 +396,6 @@ static int virtnet_probe(struct virtio_device *vdev)
         }
 
         pr_debug("virtnet: registered device %s\n", dev->name);
-        vdev->priv = vi;
         return 0;
 
 unregister:
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 1a2141dabdc7..8bc4bc4c330e 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -32,6 +32,7 @@ config B43_PCI_AUTOSELECT
         bool
         depends on B43 && SSB_PCIHOST_POSSIBLE
         select SSB_PCIHOST
+        select SSB_B43_PCI_BRIDGE
         default y
 
 # Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 6745579ba96d..13c65faf0247 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -25,6 +25,7 @@ config B43LEGACY_PCI_AUTOSELECT
         bool
         depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
         select SSB_PCIHOST
+        select SSB_B43_PCI_BRIDGE
         default y
 
 # Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig
index 0159701e8456..afb8f4305c24 100644
--- a/drivers/net/wireless/bcm43xx/Kconfig
+++ b/drivers/net/wireless/bcm43xx/Kconfig
@@ -1,6 +1,6 @@
 config BCM43XX
         tristate "Broadcom BCM43xx wireless support (DEPRECATED)"
-        depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL
+        depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && (!SSB_B43_PCI_BRIDGE || SSB != y) && EXPERIMENTAL
         select WIRELESS_EXT
         select FW_LOADER
         select HW_RANDOM
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index eab020338fde..b3c1acbcc655 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
         lbs_deb_leave(LBS_DEB_CMD);
         return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
 
 int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
 {
@@ -1576,7 +1575,6 @@ done:
         lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
         return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
 
 /**
  *  @brief This function allocates the command buffer and link
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index aaacd9bd6bd2..4e22341b4f3d 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 int lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
 int lbs_update_channel(struct lbs_private *priv);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49ca0fae..4d4e2f3b66ac 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1351,8 +1351,6 @@ done:
         lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
         return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
 
 static void lbs_remove_mesh(struct lbs_private *priv)
 {
@@ -1372,7 +1370,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
         free_netdev(mesh_dev);
         lbs_deb_leave(LBS_DEB_MESH);
 }
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
 
 /**
  *  @brief This function finds the CFP in
@@ -1458,20 +1455,6 @@ void lbs_interrupt(struct lbs_private *priv)
 }
 EXPORT_SYMBOL_GPL(lbs_interrupt);
 
-int lbs_reset_device(struct lbs_private *priv)
-{
-        int ret;
-
-        lbs_deb_enter(LBS_DEB_MAIN);
-        ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
-                                    CMD_ACT_HALT, 0, 0, NULL);
-        msleep_interruptible(10);
-
-        lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-        return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
 static int __init lbs_init_module(void)
 {
         lbs_deb_enter(LBS_DEB_MAIN);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 8ce2ddf8024f..d9460aed1f22 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -228,9 +228,9 @@ struct NDIS_WLAN_BSSID_EX {
         struct NDIS_802_11_SSID Ssid;
         __le32 Privacy;
         __le32 Rssi;
-        enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+        __le32 NetworkTypeInUse;
         struct NDIS_802_11_CONFIGURATION Configuration;
-        enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
+        __le32 InfrastructureMode;
         u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
         __le32 IELength;
         u8 IEs[0];
@@ -279,11 +279,11 @@ struct RNDIS_CONFIG_PARAMETER_INFOBUFFER {
 } __attribute__((packed));
 
 /* these have to match what is in wpa_supplicant */
-enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
-enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, CIPHER_WEP104 }
-        wpa_cipher;
-enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, KEY_MGMT_802_1X_NO_WPA,
-        KEY_MGMT_WPA_NONE } wpa_key_mgmt;
+enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
+enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
+                  CIPHER_WEP104 };
+enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
+                    KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE };
 
 /*
  *  private data
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index d6cba138c7ab..c69f85ed7669 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -960,8 +960,12 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt2400pci_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt2400pci_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index e874fdcae204..91e87b53374f 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1112,8 +1112,12 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt2500pci_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt2500pci_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 4ca9730e5e92..638c3d243108 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1001,8 +1001,12 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt2500usb_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt2500usb_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 72cfe00c1ed7..07adc576db49 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -97,12 +97,16 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
         libconf.ant.rx = rx;
         libconf.ant.tx = tx;
 
+        if (rx == rt2x00dev->link.ant.active.rx &&
+            tx == rt2x00dev->link.ant.active.tx)
+                return;
+
         /*
          * Antenna setup changes require the RX to be disabled,
          * else the changes will be ignored by the device.
          */
         if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
 
         /*
          * Write new antenna setup to device and reset the link tuner.
@@ -116,7 +120,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
         rt2x00dev->link.ant.active.tx = libconf.ant.tx;
 
         if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
 }
 
 void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c4be2ac4d7a4..0d51f478bcdf 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -61,11 +61,33 @@ EXPORT_SYMBOL_GPL(rt2x00lib_get_ring);
 /*
  * Link tuning handlers
  */
-static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
 {
+        if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+                return;
+
+        /*
+         * Reset link information.
+         * Both the currently active vgc level as well as
+         * the link tuner counter should be reset. Resetting
+         * the counter is important for devices where the
+         * device should only perform link tuning during the
+         * first minute after being enabled.
+         */
         rt2x00dev->link.count = 0;
         rt2x00dev->link.vgc_level = 0;
 
+        /*
+         * Reset the link tuner.
+         */
+        rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+}
+
+static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+{
+        /*
+         * Clear all (possibly) pre-existing quality statistics.
+         */
         memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual));
 
         /*
@@ -79,10 +101,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
         rt2x00dev->link.qual.rx_percentage = 50;
         rt2x00dev->link.qual.tx_percentage = 50;
 
-        /*
-         * Reset the link tuner.
-         */
-        rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+        rt2x00lib_reset_link_tuner(rt2x00dev);
 
         queue_delayed_work(rt2x00dev->hw->workqueue,
                            &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
@@ -93,15 +112,6 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
         cancel_delayed_work_sync(&rt2x00dev->link.work);
 }
 
-void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
-{
-        if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-                return;
-
-        rt2x00lib_stop_link_tuner(rt2x00dev);
-        rt2x00lib_start_link_tuner(rt2x00dev);
-}
-
 /*
  * Ring initialization
  */
@@ -260,19 +270,11 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev)
         if (sample_a == sample_b)
                 return;
 
-        if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) {
-                if (sample_a > sample_b && rx == ANTENNA_B)
-                        rx = ANTENNA_A;
-                else if (rx == ANTENNA_A)
-                        rx = ANTENNA_B;
-        }
+        if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
+                rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
 
-        if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) {
-                if (sample_a > sample_b && tx == ANTENNA_B)
-                        tx = ANTENNA_A;
-                else if (tx == ANTENNA_A)
-                        tx = ANTENNA_B;
-        }
+        if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
+                tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
 
         rt2x00lib_config_antenna(rt2x00dev, rx, tx);
 }
@@ -293,7 +295,7 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev)
          * sample the rssi from the other antenna to make a valid
          * comparison between the 2 antennas.
          */
-        if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5)
+        if (abs(rssi_curr - rssi_old) < 5)
                 return;
 
         rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE;
@@ -319,15 +321,15 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev)
         rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY;
 
         if (rt2x00dev->hw->conf.antenna_sel_rx == 0 &&
-            rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY)
+            rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
                 rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY;
         if (rt2x00dev->hw->conf.antenna_sel_tx == 0 &&
-            rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY)
+            rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
                 rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY;
 
         if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) &&
             !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) {
-                rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE;
+                rt2x00dev->link.ant.flags = 0;
                 return;
         }
 
@@ -441,17 +443,18 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
                 rt2x00dev->ops->lib->link_tuner(rt2x00dev);
 
         /*
-         * Evaluate antenna setup.
-         */
-        rt2x00lib_evaluate_antenna(rt2x00dev);
-
-        /*
          * Precalculate a portion of the link signal which is
          * in based on the tx/rx success/failure counters.
          */
         rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual);
 
         /*
+         * Evaluate antenna setup, make this the last step since this could
+         * possibly reset some statistics.
+         */
+        rt2x00lib_evaluate_antenna(rt2x00dev);
+
+        /*
          * Increase tuner counter, and reschedule the next link tuner run.
          */
         rt2x00dev->link.count++;
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 838421216da0..b1915dc7dda1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -85,6 +85,8 @@ enum dev_state {
         STATE_RADIO_OFF,
         STATE_RADIO_RX_ON,
         STATE_RADIO_RX_OFF,
+        STATE_RADIO_RX_ON_LINK,
+        STATE_RADIO_RX_OFF_LINK,
         STATE_RADIO_IRQ_ON,
         STATE_RADIO_IRQ_OFF,
 };
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index b31f0c26c32b..e808db98f2f5 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1482,8 +1482,12 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt61pci_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt61pci_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 4d576ab3e7f9..4fac2d414d84 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1208,8 +1208,12 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
                 rt73usb_disable_radio(rt2x00dev);
                 break;
         case STATE_RADIO_RX_ON:
+        case STATE_RADIO_RX_ON_LINK:
+                rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+                break;
         case STATE_RADIO_RX_OFF:
-                rt73usb_toggle_rx(rt2x00dev, state);
+        case STATE_RADIO_RX_OFF_LINK:
+                rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
                 break;
         case STATE_DEEP_SLEEP:
         case STATE_SLEEP:
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index a98b2470b9ea..bd5c0e031398 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -242,8 +242,7 @@ void pci_remove_rom(struct pci_dev *pdev)
 #endif  /*  0  */
 
 /**
- * pci_cleanup_rom - internal routine for freeing the ROM copy created
- * by pci_map_rom_copy called from remove.c
+ * pci_cleanup_rom - free the ROM copy created by pci_map_rom_copy
  * @pdev: pointer to pci device struct
  *
  * Free the copied ROM if we allocated one.
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 5480119ff9d3..3ce9f3defc12 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -78,8 +78,7 @@ void rio_dev_put(struct rio_dev *rdev)
 }
 
 /**
- *  rio_device_probe - Tell if a RIO device structure has a matching RIO
- *                     device id structure
+ *  rio_device_probe - Tell if a RIO device structure has a matching RIO device id structure
  *  @id: the RIO device id structure to match against
  *  @dev: the RIO device structure to match against
  *
@@ -137,7 +136,7 @@ static int rio_device_remove(struct device *dev)
  *  rio_register_driver - register a new RIO driver
  *  @rdrv: the RIO driver structure to register
  *
- *  Adds a &struct rio_driver to the list of registered drivers
+ *  Adds a &struct rio_driver to the list of registered drivers.
  *  Returns a negative value on error, otherwise 0. If no error
  *  occurred, the driver remains registered even if no device
  *  was claimed during registration.
@@ -167,8 +166,7 @@ void rio_unregister_driver(struct rio_driver *rdrv)
 }
 
 /**
- *  rio_match_bus - Tell if a RIO device structure has a matching RIO
- *                  driver device id structure
+ *  rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
  *  @dev: the standard device structure to match against
  *  @drv: the standard driver structure containing the ids to match against
  *
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index c3076217871e..d8a5c229c5a7 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -1851,8 +1851,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
                 }
         }
         /*      See how many write buffers are required to hold this data */
-        numBuffers= ( skb->len + privptr->p_env->write_size - 1) /
-                        ( privptr->p_env->write_size);
+        numBuffers = DIV_ROUND_UP(skb->len, privptr->p_env->write_size);
 
         /*      If that number of buffers isn't available, give up for now */
         if (privptr->write_free_count < numBuffers ||
@@ -2114,8 +2113,7 @@ init_ccw_bk(struct net_device *dev)
         */
         ccw_blocks_perpage= PAGE_SIZE /  CCWBK_SIZE;
         ccw_pages_required=
-                (ccw_blocks_required+ccw_blocks_perpage -1) /
-                         ccw_blocks_perpage;
+                DIV_ROUND_UP(ccw_blocks_required, ccw_blocks_perpage);
 
 #ifdef DEBUGMSG
         printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n",
@@ -2131,30 +2129,29 @@ init_ccw_bk(struct net_device *dev)
          * provide good performance. With packing buffers support 32k
          * buffers are used.
          */
-        if (privptr->p_env->read_size < PAGE_SIZE) {
-            claw_reads_perpage= PAGE_SIZE / privptr->p_env->read_size;
-            claw_read_pages= (privptr->p_env->read_buffers +
-                claw_reads_perpage -1) / claw_reads_perpage;
+        if (privptr->p_env->read_size < PAGE_SIZE) {
+                claw_reads_perpage = PAGE_SIZE / privptr->p_env->read_size;
+                claw_read_pages = DIV_ROUND_UP(privptr->p_env->read_buffers,
+                                                claw_reads_perpage);
          }
          else {       /* > or equal  */
-            privptr->p_buff_pages_perread=
-                (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE;
-            claw_read_pages=
-                privptr->p_env->read_buffers * privptr->p_buff_pages_perread;
+                privptr->p_buff_pages_perread =
+                        DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE);
+                claw_read_pages = privptr->p_env->read_buffers *
+                                        privptr->p_buff_pages_perread;
          }
         if (privptr->p_env->write_size < PAGE_SIZE) {
-            claw_writes_perpage=
-                PAGE_SIZE / privptr->p_env->write_size;
-            claw_write_pages=
-                (privptr->p_env->write_buffers + claw_writes_perpage -1) /
-                        claw_writes_perpage;
+                claw_writes_perpage =
+                        PAGE_SIZE / privptr->p_env->write_size;
+                claw_write_pages = DIV_ROUND_UP(privptr->p_env->write_buffers,
+                                                claw_writes_perpage);
 
         }
         else {      /* >  or equal  */
-            privptr->p_buff_pages_perwrite=
-                 (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE;
-            claw_write_pages=
-                privptr->p_env->write_buffers * privptr->p_buff_pages_perwrite;
+                privptr->p_buff_pages_perwrite =
+                        DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE);
+                claw_write_pages = privptr->p_env->write_buffers *
+                                        privptr->p_buff_pages_perwrite;
         }
 #ifdef DEBUGMSG
         if (privptr->p_env->read_size < PAGE_SIZE) {
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 1dc165ad17fb..e67c14e31bab 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1577,8 +1577,7 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel,
 }
 
 /**
- * scsi_scan_target - scan a target id, possibly including all LUNs on the
- *     target.
+ * scsi_scan_target - scan a target id, possibly including all LUNs on the target.
  * @parent:     host to scan
  * @channel:    channel to scan
  * @id:         target id to scan
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b82595cf13e8..cf627cd1b4c8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -686,7 +686,7 @@ config UART0_RTS_PIN
 
 config SERIAL_BFIN_UART1
         bool "Enable UART1"
-        depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
+        depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
         help
           Enable UART1
 
@@ -699,14 +699,14 @@ config BFIN_UART1_CTSRTS
 
 config UART1_CTS_PIN
         int "UART1 CTS pin"
-        depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+        depends on BFIN_UART1_CTSRTS && !BF54x
         default -1
         help
           Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
 
 config UART1_RTS_PIN
         int "UART1 RTS pin"
-        depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+        depends on BFIN_UART1_CTSRTS && !BF54x
         default -1
         help
           Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index ac2a3ef28d55..0aa345b9a38b 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,30 +1,11 @@
 /*
- * File:         drivers/serial/bfin_5xx.c
- * Based on:     Based on drivers/serial/sa1100.c
- * Author:       Aubrey Li <aubrey.li@analog.com>
+ * Blackfin On-Chip Serial Driver
  *
- * Created:
- * Description:  Driver for blackfin 5xx serial ports
+ * Copyright 2006-2007 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2006 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -67,14 +48,12 @@
 #define DMA_RX_XCOUNT           512
 #define DMA_RX_YCOUNT           (PAGE_SIZE / DMA_RX_XCOUNT)
 
-#define DMA_RX_FLUSH_JIFFIES    5
+#define DMA_RX_FLUSH_JIFFIES    (HZ / 50)
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
 #else
-static void bfin_serial_do_work(struct work_struct *work);
 static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
-static void local_put_char(struct bfin_serial_port *uart, char ch);
 #endif
 
 static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
@@ -85,23 +64,26 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
 static void bfin_serial_stop_tx(struct uart_port *port)
 {
         struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+        struct circ_buf *xmit = &uart->port.info->xmit;
+#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA)
+        unsigned short ier;
+#endif
 
         while (!(UART_GET_LSR(uart) & TEMT))
-                continue;
+                cpu_relax();
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
         disable_dma(uart->tx_dma_channel);
+        xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
+        uart->port.icount.tx += uart->tx_count;
+        uart->tx_count = 0;
+        uart->tx_done = 1;
 #else
 #ifdef CONFIG_BF54x
-        /* Waiting for Transmission Finished */
-        while (!(UART_GET_LSR(uart) & TFI))
-                continue;
         /* Clear TFI bit */
         UART_PUT_LSR(uart, TFI);
         UART_CLEAR_IER(uart, ETBEI);
 #else
-        unsigned short ier;
-
         ier = UART_GET_IER(uart);
         ier &= ~ETBEI;
         UART_PUT_IER(uart, ier);
@@ -117,7 +99,8 @@ static void bfin_serial_start_tx(struct uart_port *port)
         struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
-        bfin_serial_dma_tx_chars(uart);
+        if (uart->tx_done)
+                bfin_serial_dma_tx_chars(uart);
 #else
 #ifdef CONFIG_BF54x
         UART_SET_IER(uart, ETBEI);
@@ -209,34 +192,27 @@ int kgdb_get_debug_char(void)
 }
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_PIO
-static void local_put_char(struct bfin_serial_port *uart, char ch)
-{
-        unsigned short status;
-        int flags = 0;
-
-        spin_lock_irqsave(&uart->port.lock, flags);
-
-        do {
-                status = UART_GET_LSR(uart);
-        } while (!(status & THRE));
-
-        UART_PUT_CHAR(uart, ch);
-        SSYNC();
-
-        spin_unlock_irqrestore(&uart->port.lock, flags);
-}
+#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO)
+# define UART_GET_ANOMALY_THRESHOLD(uart)    ((uart)->anomaly_threshold)
+# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v))
+#else
+# define UART_GET_ANOMALY_THRESHOLD(uart)    0
+# define UART_SET_ANOMALY_THRESHOLD(uart, v)
+#endif
 
+#ifdef CONFIG_SERIAL_BFIN_PIO
 static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 {
         struct tty_struct *tty = uart->port.info->tty;
         unsigned int status, ch, flg;
-        static int in_break = 0;
+        static struct timeval anomaly_start = { .tv_sec = 0 };
 #ifdef CONFIG_KGDB_UART
         struct pt_regs *regs = get_irq_regs();
 #endif
 
         status = UART_GET_LSR(uart);
+        UART_CLEAR_LSR(uart);
+
         ch = UART_GET_CHAR(uart);
         uart->port.icount.rx++;
 
@@ -262,28 +238,56 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 #endif
 
         if (ANOMALY_05000230) {
-                /* The BF533 family of processors have a nice misbehavior where
-                 * they continuously generate characters for a "single" break.
+                /* The BF533 (and BF561) family of processors have a nice anomaly
+                 * where they continuously generate characters for a "single" break.
                  * We have to basically ignore this flood until the "next" valid
-                 * character comes across.  All other Blackfin families operate
-                 * properly though.
+                 * character comes across.  Due to the nature of the flood, it is
+                 * not possible to reliably catch bytes that are sent too quickly
+                 * after this break.  So application code talking to the Blackfin
+                 * which sends a break signal must allow at least 1.5 character
+                 * times after the end of the break for things to stabilize.  This
+                 * timeout was picked as it must absolutely be larger than 1
+                 * character time +/- some percent.  So 1.5 sounds good.  All other
+                 * Blackfin families operate properly.  Woo.
                  * Note: While Anomaly 05000230 does not directly address this,
                  *       the changes that went in for it also fixed this issue.
+                 *       That anomaly was fixed in 0.5+ silicon.  I like bunnies.
                  */
-                if (in_break) {
-                        if (ch != 0) {
-                                in_break = 0;
-                                ch = UART_GET_CHAR(uart);
-                                if (bfin_revid() < 5)
-                                        return;
-                        } else
-                                return;
+                if (anomaly_start.tv_sec) {
+                        struct timeval curr;
+                        suseconds_t usecs;
+
+                        if ((~ch & (~ch + 1)) & 0xff)
+                                goto known_good_char;
+
+                        do_gettimeofday(&curr);
+                        if (curr.tv_sec - anomaly_start.tv_sec > 1)
+                                goto known_good_char;
+
+                        usecs = 0;
+                        if (curr.tv_sec != anomaly_start.tv_sec)
+                                usecs += USEC_PER_SEC;
+                        usecs += curr.tv_usec - anomaly_start.tv_usec;
+
+                        if (usecs > UART_GET_ANOMALY_THRESHOLD(uart))
+                                goto known_good_char;
+
+                        if (ch)
+                                anomaly_start.tv_sec = 0;
+                        else
+                                anomaly_start = curr;
+
+                        return;
+
+ known_good_char:
+                        anomaly_start.tv_sec = 0;
                 }
         }
 
         if (status & BI) {
                 if (ANOMALY_05000230)
-                        in_break = 1;
+                        if (bfin_revid() < 5)
+                                do_gettimeofday(&anomaly_start);
                 uart->port.icount.brk++;
                 if (uart_handle_break(&uart->port))
                         goto ignore_char;
@@ -324,7 +328,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
                 UART_PUT_CHAR(uart, uart->port.x_char);
                 uart->port.icount.tx++;
                 uart->port.x_char = 0;
-                return;
         }
         /*
          * Check the modem control lines before
@@ -337,9 +340,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
                 return;
         }
 
-        local_put_char(uart, xmit->buf[xmit->tail]);
-        xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-        uart->port.icount.tx++;
+        while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
+                UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
+                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+                uart->port.icount.tx++;
+                SSYNC();
+        }
 
         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                 uart_write_wakeup(&uart->port);
@@ -352,21 +358,11 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
 {
         struct bfin_serial_port *uart = dev_id;
 
-#ifdef CONFIG_BF54x
-        unsigned short status;
-        spin_lock(&uart->port.lock);
-        status = UART_GET_LSR(uart);
-        while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
-                bfin_serial_rx_chars(uart);
-                status = UART_GET_LSR(uart);
-        }
-        spin_unlock(&uart->port.lock);
-#else
         spin_lock(&uart->port.lock);
-        while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
+        while (UART_GET_LSR(uart) & DR)
                 bfin_serial_rx_chars(uart);
         spin_unlock(&uart->port.lock);
-#endif
+
         return IRQ_HANDLED;
 }
 
@@ -374,25 +370,16 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 {
         struct bfin_serial_port *uart = dev_id;
 
-#ifdef CONFIG_BF54x
-        unsigned short status;
         spin_lock(&uart->port.lock);
-        status = UART_GET_LSR(uart);
-        while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
+        if (UART_GET_LSR(uart) & THRE)
                 bfin_serial_tx_chars(uart);
-                status = UART_GET_LSR(uart);
-        }
         spin_unlock(&uart->port.lock);
-#else
-        spin_lock(&uart->port.lock);
-        while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
-                bfin_serial_tx_chars(uart);
-        spin_unlock(&uart->port.lock);
-#endif
+
         return IRQ_HANDLED;
 }
+#endif
 
-
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 static void bfin_serial_do_work(struct work_struct *work)
 {
         struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
@@ -406,33 +393,27 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
         struct circ_buf *xmit = &uart->port.info->xmit;
         unsigned short ier;
-        int flags = 0;
-
-        if (!uart->tx_done)
-                return;
 
         uart->tx_done = 0;
 
+        if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
+                uart->tx_count = 0;
+                uart->tx_done = 1;
+                return;
+        }
+
         if (uart->port.x_char) {
                 UART_PUT_CHAR(uart, uart->port.x_char);
                 uart->port.icount.tx++;
                 uart->port.x_char = 0;
-                uart->tx_done = 1;
-                return;
         }
+
         /*
          * Check the modem control lines before
          * transmitting anything.
          */
         bfin_serial_mctrl_check(uart);
 
-        if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
-                bfin_serial_stop_tx(&uart->port);
-                uart->tx_done = 1;
-                return;
-        }
-
-        spin_lock_irqsave(&uart->port.lock, flags);
         uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
         if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
                 uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -448,6 +429,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
         set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
         set_dma_x_modify(uart->tx_dma_channel, 1);
         enable_dma(uart->tx_dma_channel);
+
 #ifdef CONFIG_BF54x
         UART_SET_IER(uart, ETBEI);
 #else
@@ -455,7 +437,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
         ier |= ETBEI;
         UART_PUT_IER(uart, ier);
 #endif
-        spin_unlock_irqrestore(&uart->port.lock, flags);
 }
 
 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
@@ -464,7 +445,11 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
         int i, flg, status;
 
         status = UART_GET_LSR(uart);
-        uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);;
+        UART_CLEAR_LSR(uart);
+
+        uart->port.icount.rx +=
+                CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail,
+                UART_XMIT_SIZE);
 
         if (status & BI) {
                 uart->port.icount.brk++;
@@ -490,10 +475,12 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
         else
                 flg = TTY_NORMAL;
 
-        for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) {
-                if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
-                        goto dma_ignore_char;
-                uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg);
+        for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) {
+                if (i >= UART_XMIT_SIZE)
+                        i = 0;
+                if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
+                        uart_insert_char(&uart->port, status, OE,
+                                uart->rx_dma_buf.buf[i], flg);
         }
 
  dma_ignore_char:
@@ -503,23 +490,23 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
         int x_pos, pos;
-        int flags = 0;
-
-        bfin_serial_dma_tx_chars(uart);
 
-        spin_lock_irqsave(&uart->port.lock, flags);
-        x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel);
+        uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
+        x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
+        uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
+        if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
+                uart->rx_dma_nrows = 0;
+        x_pos = DMA_RX_XCOUNT - x_pos;
         if (x_pos == DMA_RX_XCOUNT)
                 x_pos = 0;
 
         pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
-
-        if (pos>uart->rx_dma_buf.tail) {
-                uart->rx_dma_buf.tail = pos;
+        if (pos != uart->rx_dma_buf.tail) {
+                uart->rx_dma_buf.head = pos;
                 bfin_serial_dma_rx_chars(uart);
-                uart->rx_dma_buf.head = uart->rx_dma_buf.tail;
+                uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
         }
-        spin_unlock_irqrestore(&uart->port.lock, flags);
+
         uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
         add_timer(&(uart->rx_dma_timer));
 }
@@ -532,8 +519,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 
         spin_lock(&uart->port.lock);
         if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
-                clear_dma_irqstat(uart->tx_dma_channel);
                 disable_dma(uart->tx_dma_channel);
+                clear_dma_irqstat(uart->tx_dma_channel);
 #ifdef CONFIG_BF54x
                 UART_CLEAR_IER(uart, ETBEI);
 #else
@@ -541,15 +528,13 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
                 ier &= ~ETBEI;
                 UART_PUT_IER(uart, ier);
 #endif
-                xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
-                uart->port.icount.tx+=uart->tx_count;
+                xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
+                uart->port.icount.tx += uart->tx_count;
 
                 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                         uart_write_wakeup(&uart->port);
 
-                if (uart_circ_empty(xmit))
-                        bfin_serial_stop_tx(&uart->port);
-                uart->tx_done = 1;
+                bfin_serial_dma_tx_chars(uart);
         }
 
         spin_unlock(&uart->port.lock);
@@ -561,18 +546,15 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
         struct bfin_serial_port *uart = dev_id;
         unsigned short irqstat;
 
-        uart->rx_dma_nrows++;
-        if (uart->rx_dma_nrows == DMA_RX_YCOUNT) {
-                uart->rx_dma_nrows = 0;
-                uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT;
-                bfin_serial_dma_rx_chars(uart);
-                uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0;
-        }
         spin_lock(&uart->port.lock);
         irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
         clear_dma_irqstat(uart->rx_dma_channel);
-
         spin_unlock(&uart->port.lock);
+
+        del_timer(&(uart->rx_dma_timer));
+        uart->rx_dma_timer.expires = jiffies;
+        add_timer(&(uart->rx_dma_timer));
+
         return IRQ_HANDLED;
 }
 #endif
@@ -599,7 +581,11 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
         if (uart->cts_pin < 0)
                 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 
+# ifdef BF54x
+        if (UART_GET_MSR(uart) & CTS)
+# else
         if (gpio_get_value(uart->cts_pin))
+# endif
                 return TIOCM_DSR | TIOCM_CAR;
         else
 #endif
@@ -614,9 +600,17 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
                 return;
 
         if (mctrl & TIOCM_RTS)
+# ifdef BF54x
+                UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
+# else
                 gpio_set_value(uart->rts_pin, 0);
+# endif
         else
+# ifdef BF54x
+                UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
+# else
                 gpio_set_value(uart->rts_pin, 1);
+# endif
 #endif
 }
 
@@ -627,22 +621,17 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
 {
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
         unsigned int status;
-# ifdef CONFIG_SERIAL_BFIN_DMA
         struct uart_info *info = uart->port.info;
         struct tty_struct *tty = info->tty;
 
         status = bfin_serial_get_mctrl(&uart->port);
+        uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
         if (!(status & TIOCM_CTS)) {
                 tty->hw_stopped = 1;
+                schedule_work(&uart->cts_workqueue);
         } else {
                 tty->hw_stopped = 0;
         }
-# else
-        status = bfin_serial_get_mctrl(&uart->port);
-        uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
-        if (!(status & TIOCM_CTS))
-                schedule_work(&uart->cts_workqueue);
-# endif
 #endif
 }
 
@@ -743,6 +732,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
         disable_dma(uart->rx_dma_channel);
         free_dma(uart->rx_dma_channel);
         del_timer(&(uart->rx_dma_timer));
+        dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
 #else
 #ifdef  CONFIG_KGDB_UART
         if (uart->port.line != CONFIG_KGDB_UART_PORT)
@@ -814,6 +804,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
         quot = uart_get_divisor(port, baud);
         spin_lock_irqsave(&uart->port.lock, flags);
 
+        UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
+
         do {
                 lsr = UART_GET_LSR(uart);
         } while (!(lsr & TEMT));
@@ -956,10 +948,9 @@ static void __init bfin_serial_init_ports(void)
                 bfin_serial_ports[i].rx_dma_channel =
                         bfin_serial_resource[i].uart_rx_dma_channel;
                 init_timer(&(bfin_serial_ports[i].rx_dma_timer));
-#else
-                INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
+                INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
                 bfin_serial_ports[i].cts_pin        =
                         bfin_serial_resource[i].uart_cts_pin;
                 bfin_serial_ports[i].rts_pin        =
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 9ce12cb2cebc..a8c116b80bff 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -41,6 +41,7 @@
 #include <linux/delay.h>
 #include <linux/console.h>
 #include <linux/platform_device.h>
+#include <linux/serial_sci.h>
 
 #ifdef CONFIG_CPU_FREQ
 #include <linux/notifier.h>
@@ -54,7 +55,6 @@
 #include <asm/kgdb.h>
 #endif
 
-#include <asm/sci.h>
 #include "sh-sci.h"
 
 struct sci_port {
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 9cfcfd8dad5e..617efb1640b1 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -1,7 +1,7 @@
 /*
  * Core maple bus functionality
  *
- *  Copyright (C) 2007 Adrian McMenamin
+ *  Copyright (C) 2007, 2008 Adrian McMenamin
  *
  * Based on 2.4 code by:
  *
@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/io.h>
@@ -54,7 +53,7 @@ static struct device maple_bus;
 static int subdevice_map[MAPLE_PORTS];
 static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
 static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, realscan;
+static int started, scanning, liststatus, fullscan;
 static struct kmem_cache *maple_queue_cache;
 
 struct maple_device_specify {
@@ -62,6 +61,9 @@ struct maple_device_specify {
         int unit;
 };
 
+static bool checked[4];
+static struct maple_device *baseunits[4];
+
 /**
  *  maple_driver_register - register a device driver
  *  automatically makes the driver bus a maple bus
@@ -309,11 +311,9 @@ static void maple_attach_driver(struct maple_device *mdev)
                 else
                         break;
 
-        if (realscan) {
-                printk(KERN_INFO "Maple device detected: %s\n",
-                        mdev->product_name);
-                printk(KERN_INFO "Maple device: %s\n", mdev->product_licence);
-        }
+        printk(KERN_INFO "Maple device detected: %s\n",
+                mdev->product_name);
+        printk(KERN_INFO "Maple device: %s\n", mdev->product_licence);
 
         function = be32_to_cpu(mdev->devinfo.function);
 
@@ -323,10 +323,9 @@ static void maple_attach_driver(struct maple_device *mdev)
                 mdev->driver = &maple_dummy_driver;
                 sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port);
         } else {
-                if (realscan)
-                        printk(KERN_INFO
-                                "Maple bus at (%d, %d): Function 0x%lX\n",
-                                mdev->port, mdev->unit, function);
+                printk(KERN_INFO
+                        "Maple bus at (%d, %d): Function 0x%lX\n",
+                        mdev->port, mdev->unit, function);
 
                 matched =
                     bus_for_each_drv(&maple_bus_type, NULL, mdev,
@@ -334,9 +333,8 @@ static void maple_attach_driver(struct maple_device *mdev)
 
                 if (matched == 0) {
                         /* Driver does not exist yet */
-                        if (realscan)
-                                printk(KERN_INFO
-                                        "No maple driver found.\n");
+                        printk(KERN_INFO
+                                "No maple driver found.\n");
                         mdev->driver = &maple_dummy_driver;
                 }
                 sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port,
@@ -472,9 +470,12 @@ static void maple_response_none(struct maple_device *mdev,
                 maple_detach_driver(mdev);
                 return;
         }
-        if (!started) {
-                printk(KERN_INFO "No maple devices attached to port %d\n",
-                       mdev->port);
+        if (!started || !fullscan) {
+                if (checked[mdev->port] == false) {
+                        checked[mdev->port] = true;
+                        printk(KERN_INFO "No maple devices attached"
+                                " to port %d\n", mdev->port);
+                }
                 return;
         }
         maple_clean_submap(mdev);
@@ -485,8 +486,14 @@ static void maple_response_devinfo(struct maple_device *mdev,
                                    char *recvbuf)
 {
         char submask;
-        if ((!started) || (scanning == 2)) {
-                maple_attach_driver(mdev);
+        if (!started || (scanning == 2) || !fullscan) {
+                if ((mdev->unit == 0) && (checked[mdev->port] == false)) {
+                        checked[mdev->port] = true;
+                        maple_attach_driver(mdev);
+                } else {
+                        if (mdev->unit != 0)
+                                maple_attach_driver(mdev);
+                }
                 return;
         }
         if (mdev->unit == 0) {
@@ -505,6 +512,7 @@ static void maple_dma_handler(struct work_struct *work)
         struct maple_device *dev;
         char *recvbuf;
         enum maple_code code;
+        int i;
 
         if (!maple_dma_done())
                 return;
@@ -557,6 +565,19 @@ static void maple_dma_handler(struct work_struct *work)
                 } else
                         scanning = 0;
 
+                if (!fullscan) {
+                        fullscan = 1;
+                        for (i = 0; i < MAPLE_PORTS; i++) {
+                                if (checked[i] == false) {
+                                        fullscan = 0;
+                                        dev = baseunits[i];
+                                        dev->mq->command =
+                                                MAPLE_COMMAND_DEVINFO;
+                                        dev->mq->length = 0;
+                                        maple_add_packet(dev->mq);
+                                }
+                        }
+                }
                 if (started == 0)
                         started = 1;
         }
@@ -694,7 +715,9 @@ static int __init maple_bus_init(void)
 
         /* setup maple ports */
         for (i = 0; i < MAPLE_PORTS; i++) {
+                checked[i] = false;
                 mdev[i] = maple_alloc_dev(i, 0);
+                baseunits[i] = mdev[i];
                 if (!mdev[i]) {
                         while (i-- > 0)
                                 maple_free_dev(mdev[i]);
@@ -703,12 +726,9 @@ static int __init maple_bus_init(void)
                 mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
                 mdev[i]->mq->length = 0;
                 maple_add_packet(mdev[i]->mq);
-                /* delay aids hardware detection */
-                mdelay(5);
                 subdevice_map[i] = 0;
         }
 
-        realscan = 1;
         /* setup maplebus hardware */
         maplebus_dma_reset();
         /* initial detection */
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 78fd33125e02..adea792fb675 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -35,6 +35,11 @@ config SSB_PCIHOST
 
           If unsure, say Y
 
+config SSB_B43_PCI_BRIDGE
+        bool
+        depends on SSB_PCIHOST
+        default n
+
 config SSB_PCMCIAHOST_POSSIBLE
         bool
         depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index e235144add7c..de94c2eb7a37 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -14,6 +14,6 @@ ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
 
 # b43 pci-ssb-bridge driver
 # Not strictly a part of SSB, but kept here for convenience
-ssb-$(CONFIG_SSB_PCIHOST)               += b43_pci_bridge.o
+ssb-$(CONFIG_SSB_B43_PCI_BRIDGE)        += b43_pci_bridge.o
 
 obj-$(CONFIG_SSB)                       += ssb.o
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 6d99a9880055..07ab48d9ceab 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -393,7 +393,7 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
             chipid_top != 0x5300)
                 return 0;
 
-        if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
+        if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
                 return 0;
 
         /* The 200-pin BCM4712 package does not bond out PCI. Even when
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index a789364264a6..21eca2b5118b 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -120,10 +120,10 @@ extern int ssb_devices_thaw(struct ssb_bus *bus);
 extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
 
 /* b43_pci_bridge.c */
-#ifdef CONFIG_SSB_PCIHOST
+#ifdef CONFIG_SSB_B43_PCI_BRIDGE
 extern int __init b43_pci_ssb_bridge_init(void);
 extern void __exit b43_pci_ssb_bridge_exit(void);
-#else /* CONFIG_SSB_PCIHOST */
+#else /* CONFIG_SSB_B43_PCI_BRIDGR */
 static inline int b43_pci_ssb_bridge_init(void)
 {
         return 0;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 4e984060c984..f6f19908f5f0 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -99,8 +99,7 @@ struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
 EXPORT_SYMBOL_GPL(usb_ifnum_to_if);
 
 /**
- * usb_altnum_to_altsetting - get the altsetting structure with a given
- *      alternate setting number.
+ * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number.
  * @intf: the interface containing the altsetting in question
  * @altnum: the desired alternate setting number
  *
@@ -442,8 +441,7 @@ EXPORT_SYMBOL_GPL(usb_put_intf);
  */
 
 /**
- * usb_lock_device_for_reset - cautiously acquire the lock for a
- *      usb device structure
+ * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure
  * @udev: device that's being locked
  * @iface: interface bound to the driver making the request (optional)
  *
diff --git a/fs/buffer.c b/fs/buffer.c
index 3ebccf4aa7e3..897cd7477b34 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -627,8 +627,7 @@ repeat:
 }
 
 /**
- * sync_mapping_buffers - write out and wait upon a mapping's "associated"
- *                        buffers
+ * sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers
  * @mapping: the mapping which wants those buffers written
  *
  * Starts I/O against the buffers at mapping->private_list, and waits upon
diff --git a/fs/exec.c b/fs/exec.c
index a44b142fb460..54a0a557b678 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -173,8 +173,15 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
                 return NULL;
 
         if (write) {
-                struct rlimit *rlim = current->signal->rlim;
                 unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
+                struct rlimit *rlim;
+
+                /*
+                 * We've historically supported up to 32 pages (ARG_MAX)
+                 * of argument strings even with small stacks
+                 */
+                if (size <= ARG_MAX)
+                        return page;
 
                 /*
                  * Limit to 1/4-th the stack size for the argv+env strings.
@@ -183,6 +190,7 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
                  *  - the program will have a reasonable amount of stack left
                  *    to work from.
                  */
+                rlim = current->signal->rlim;
                 if (size > rlim[RLIMIT_STACK].rlim_cur / 4) {
                         put_page(page);
                         return NULL;
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index 33888bb58144..2c23bade9aa6 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -46,7 +46,7 @@ const struct file_operations ext4_dir_operations = {
 #ifdef CONFIG_COMPAT
         .compat_ioctl   = ext4_compat_ioctl,
 #endif
-        .fsync          = ext4_sync_file,       /* BKL held */
+        .fsync          = ext4_sync_file,
         .release        = ext4_release_dir,
 };
 
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index bc7081f1fbe8..9ae6e67090cd 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -148,6 +148,7 @@ static ext4_fsblk_t ext4_ext_find_goal(struct inode *inode,
 {
         struct ext4_inode_info *ei = EXT4_I(inode);
         ext4_fsblk_t bg_start;
+        ext4_fsblk_t last_block;
         ext4_grpblk_t colour;
         int depth;
 
@@ -169,8 +170,13 @@ static ext4_fsblk_t ext4_ext_find_goal(struct inode *inode,
         /* OK. use inode's group */
         bg_start = (ei->i_block_group * EXT4_BLOCKS_PER_GROUP(inode->i_sb)) +
                 le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_first_data_block);
-        colour = (current->pid % 16) *
+        last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1;
+
+        if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block)
+                colour = (current->pid % 16) *
                         (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16);
+        else
+                colour = (current->pid % 16) * ((last_block - bg_start) / 16);
         return bg_start + colour + block;
 }
 
@@ -349,7 +355,7 @@ static void ext4_ext_show_leaf(struct inode *inode, struct ext4_ext_path *path)
 #define ext4_ext_show_leaf(inode,path)
 #endif
 
-static void ext4_ext_drop_refs(struct ext4_ext_path *path)
+void ext4_ext_drop_refs(struct ext4_ext_path *path)
 {
         int depth = path->p_depth;
         int i;
@@ -2168,6 +2174,10 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
         newblock = iblock - ee_block + ext_pblock(ex);
         ex2 = ex;
 
+        err = ext4_ext_get_access(handle, inode, path + depth);
+        if (err)
+                goto out;
+
         /* ex1: ee_block to iblock - 1 : uninitialized */
         if (iblock > ee_block) {
                 ex1 = ex;
@@ -2200,16 +2210,20 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
                 newdepth = ext_depth(inode);
                 if (newdepth != depth) {
                         depth = newdepth;
-                        path = ext4_ext_find_extent(inode, iblock, NULL);
+                        ext4_ext_drop_refs(path);
+                        path = ext4_ext_find_extent(inode, iblock, path);
                         if (IS_ERR(path)) {
                                 err = PTR_ERR(path);
-                                path = NULL;
                                 goto out;
                         }
                         eh = path[depth].p_hdr;
                         ex = path[depth].p_ext;
                         if (ex2 != &newex)
                                 ex2 = ex;
+
+                        err = ext4_ext_get_access(handle, inode, path + depth);
+                        if (err)
+                                goto out;
                 }
                 allocated = max_blocks;
         }
@@ -2230,9 +2244,6 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
         ex2->ee_len = cpu_to_le16(allocated);
         if (ex2 != ex)
                 goto insert;
-        err = ext4_ext_get_access(handle, inode, path + depth);
-        if (err)
-                goto out;
         /*
          * New (initialized) extent starts from the first block
          * in the current extent. i.e., ex2 == ex
@@ -2276,9 +2287,22 @@ out:
 }
 
 /*
+ * Block allocation/map/preallocation routine for extents based files
+ *
+ *
  * Need to be called with
  * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system block
  * (ie, create is zero). Otherwise down_write(&EXT4_I(inode)->i_data_sem)
+ *
+ * return > 0, number of of blocks already mapped/allocated
+ *          if create == 0 and these are pre-allocated blocks
+ *              buffer head is unmapped
+ *          otherwise blocks are mapped
+ *
+ * return = 0, if plain look up failed (blocks have not been allocated)
+ *          buffer head is unmapped
+ *
+ * return < 0, error case.
  */
 int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
                         ext4_lblk_t iblock,
@@ -2623,7 +2647,7 @@ long ext4_fallocate(struct inode *inode, int mode, loff_t offset, loff_t len)
          * modify 1 super block, 1 block bitmap and 1 group descriptor.
          */
         credits = EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + 3;
-        down_write((&EXT4_I(inode)->i_data_sem));
+        mutex_lock(&inode->i_mutex);
 retry:
         while (ret >= 0 && ret < max_blocks) {
                 block = block + ret;
@@ -2634,16 +2658,17 @@ retry:
                         break;
                 }
 
-                ret = ext4_ext_get_blocks(handle, inode, block,
+                ret = ext4_get_blocks_wrap(handle, inode, block,
                                           max_blocks, &map_bh,
                                           EXT4_CREATE_UNINITIALIZED_EXT, 0);
-                WARN_ON(ret <= 0);
                 if (ret <= 0) {
-                        ext4_error(inode->i_sb, "ext4_fallocate",
-                                    "ext4_ext_get_blocks returned error: "
-                                    "inode#%lu, block=%u, max_blocks=%lu",
+#ifdef EXT4FS_DEBUG
+                        WARN_ON(ret <= 0);
+                        printk(KERN_ERR "%s: ext4_ext_get_blocks "
+                                    "returned error inode#%lu, block=%u, "
+                                    "max_blocks=%lu", __func__,
                                     inode->i_ino, block, max_blocks);
-                        ret = -EIO;
+#endif
                         ext4_mark_inode_dirty(handle, inode);
                         ret2 = ext4_journal_stop(handle);
                         break;
@@ -2680,7 +2705,6 @@ retry:
         if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
                 goto retry;
 
-        up_write((&EXT4_I(inode)->i_data_sem));
         /*
          * Time to update the file size.
          * Update only when preallocation was requested beyond the file size.
@@ -2692,21 +2716,18 @@ retry:
                          * if no error, we assume preallocation succeeded
                          * completely
                          */
-                        mutex_lock(&inode->i_mutex);
                         i_size_write(inode, offset + len);
                         EXT4_I(inode)->i_disksize = i_size_read(inode);
-                        mutex_unlock(&inode->i_mutex);
                 } else if (ret < 0 && nblocks) {
                         /* Handle partial allocation scenario */
                         loff_t newsize;
 
-                        mutex_lock(&inode->i_mutex);
                         newsize  = (nblocks << blkbits) + i_size_read(inode);
                         i_size_write(inode, EXT4_BLOCK_ALIGN(newsize, blkbits));
                         EXT4_I(inode)->i_disksize = i_size_read(inode);
-                        mutex_unlock(&inode->i_mutex);
                 }
         }
 
+        mutex_unlock(&inode->i_mutex);
         return ret > 0 ? ret2 : ret;
 }
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index da18a74b966a..8036b9b5376b 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -702,7 +702,12 @@ got:
         ei->i_dir_start_lookup = 0;
         ei->i_disksize = 0;
 
-        ei->i_flags = EXT4_I(dir)->i_flags & ~EXT4_INDEX_FL;
+        /*
+         * Don't inherit extent flag from directory. We set extent flag on
+         * newly created directory and file only if -o extent mount option is
+         * specified
+         */
+        ei->i_flags = EXT4_I(dir)->i_flags & ~(EXT4_INDEX_FL|EXT4_EXTENTS_FL);
         if (S_ISLNK(mode))
                 ei->i_flags &= ~(EXT4_IMMUTABLE_FL|EXT4_APPEND_FL);
         /* dirsync only applies to directories */
@@ -745,12 +750,15 @@ got:
                 goto fail_free_drop;
         }
         if (test_opt(sb, EXTENTS)) {
-                EXT4_I(inode)->i_flags |= EXT4_EXTENTS_FL;
-                ext4_ext_tree_init(handle, inode);
-                err = ext4_update_incompat_feature(handle, sb,
-                                                EXT4_FEATURE_INCOMPAT_EXTENTS);
-                if (err)
-                        goto fail;
+                /* set extent flag only for directory and file */
+                if (S_ISDIR(mode) || S_ISREG(mode)) {
+                        EXT4_I(inode)->i_flags |= EXT4_EXTENTS_FL;
+                        ext4_ext_tree_init(handle, inode);
+                        err = ext4_update_incompat_feature(handle, sb,
+                                        EXT4_FEATURE_INCOMPAT_EXTENTS);
+                        if (err)
+                                goto fail;
+                }
         }
 
         ext4_debug("allocating inode %lu\n", inode->i_ino);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 7dd9b50d5ebc..945cbf6cb1fc 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -403,6 +403,7 @@ static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind)
         __le32 *start = ind->bh ? (__le32*) ind->bh->b_data : ei->i_data;
         __le32 *p;
         ext4_fsblk_t bg_start;
+        ext4_fsblk_t last_block;
         ext4_grpblk_t colour;
 
         /* Try to find previous block */
@@ -420,8 +421,13 @@ static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind)
          * into the same cylinder group then.
          */
         bg_start = ext4_group_first_block_no(inode->i_sb, ei->i_block_group);
-        colour = (current->pid % 16) *
+        last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1;
+
+        if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block)
+                colour = (current->pid % 16) *
                         (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16);
+        else
+                colour = (current->pid % 16) * ((last_block - bg_start) / 16);
         return bg_start + colour;
 }
 
@@ -768,7 +774,6 @@ err_out:
  *
  * `handle' can be NULL if create == 0.
  *
- * The BKL may not be held on entry here.  Be sure to take it early.
  * return > 0, # of blocks mapped or allocated.
  * return = 0, if plain lookup failed.
  * return < 0, error case.
@@ -903,11 +908,38 @@ out:
  */
 #define DIO_CREDITS 25
 
+
+/*
+ *
+ *
+ * ext4_ext4 get_block() wrapper function
+ * It will do a look up first, and returns if the blocks already mapped.
+ * Otherwise it takes the write lock of the i_data_sem and allocate blocks
+ * and store the allocated blocks in the result buffer head and mark it
+ * mapped.
+ *
+ * If file type is extents based, it will call ext4_ext_get_blocks(),
+ * Otherwise, call with ext4_get_blocks_handle() to handle indirect mapping
+ * based files
+ *
+ * On success, it returns the number of blocks being mapped or allocate.
+ * if create==0 and the blocks are pre-allocated and uninitialized block,
+ * the result buffer head is unmapped. If the create ==1, it will make sure
+ * the buffer head is mapped.
+ *
+ * It returns 0 if plain look up failed (blocks have not been allocated), in
+ * that casem, buffer head is unmapped
+ *
+ * It returns the error in case of allocation failure.
+ */
 int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
                         unsigned long max_blocks, struct buffer_head *bh,
                         int create, int extend_disksize)
 {
         int retval;
+
+        clear_buffer_mapped(bh);
+
         /*
          * Try to see if we can get  the block without requesting
          * for new file system block.
@@ -921,12 +953,26 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
                                 inode, block, max_blocks, bh, 0, 0);
         }
         up_read((&EXT4_I(inode)->i_data_sem));
-        if (!create || (retval > 0))
+
+        /* If it is only a block(s) look up */
+        if (!create)
+                return retval;
+
+        /*
+         * Returns if the blocks have already allocated
+         *
+         * Note that if blocks have been preallocated
+         * ext4_ext_get_block() returns th create = 0
+         * with buffer head unmapped.
+         */
+        if (retval > 0 && buffer_mapped(bh))
                 return retval;
 
         /*
-         * We need to allocate new blocks which will result
-         * in i_data update
+         * New blocks allocate and/or writing to uninitialized extent
+         * will possibly result in updating i_data, so we take
+         * the write lock of i_data_sem, and call get_blocks()
+         * with create == 1 flag.
          */
         down_write((&EXT4_I(inode)->i_data_sem));
         /*
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index dd0fcfcb35ce..ef97f19c2f9d 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -627,21 +627,19 @@ static ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
         return block;
 }
 
+static inline void *mb_correct_addr_and_bit(int *bit, void *addr)
+{
 #if BITS_PER_LONG == 64
-#define mb_correct_addr_and_bit(bit, addr)              \
-{                                                       \
-        bit += ((unsigned long) addr & 7UL) << 3;       \
-        addr = (void *) ((unsigned long) addr & ~7UL);  \
-}
+        *bit += ((unsigned long) addr & 7UL) << 3;
+        addr = (void *) ((unsigned long) addr & ~7UL);
 #elif BITS_PER_LONG == 32
-#define mb_correct_addr_and_bit(bit, addr)              \
-{                                                       \
-        bit += ((unsigned long) addr & 3UL) << 3;       \
-        addr = (void *) ((unsigned long) addr & ~3UL);  \
-}
+        *bit += ((unsigned long) addr & 3UL) << 3;
+        addr = (void *) ((unsigned long) addr & ~3UL);
 #else
 #error "how many bits you are?!"
 #endif
+        return addr;
+}
 
 static inline int mb_test_bit(int bit, void *addr)
 {
@@ -649,34 +647,54 @@ static inline int mb_test_bit(int bit, void *addr)
          * ext4_test_bit on architecture like powerpc
          * needs unsigned long aligned address
          */
-        mb_correct_addr_and_bit(bit, addr);
+        addr = mb_correct_addr_and_bit(&bit, addr);
         return ext4_test_bit(bit, addr);
 }
 
 static inline void mb_set_bit(int bit, void *addr)
 {
-        mb_correct_addr_and_bit(bit, addr);
+        addr = mb_correct_addr_and_bit(&bit, addr);
         ext4_set_bit(bit, addr);
 }
 
 static inline void mb_set_bit_atomic(spinlock_t *lock, int bit, void *addr)
 {
-        mb_correct_addr_and_bit(bit, addr);
+        addr = mb_correct_addr_and_bit(&bit, addr);
         ext4_set_bit_atomic(lock, bit, addr);
 }
 
 static inline void mb_clear_bit(int bit, void *addr)
 {
-        mb_correct_addr_and_bit(bit, addr);
+        addr = mb_correct_addr_and_bit(&bit, addr);
         ext4_clear_bit(bit, addr);
 }
 
 static inline void mb_clear_bit_atomic(spinlock_t *lock, int bit, void *addr)
 {
-        mb_correct_addr_and_bit(bit, addr);
+        addr = mb_correct_addr_and_bit(&bit, addr);
         ext4_clear_bit_atomic(lock, bit, addr);
 }
 
+static inline int mb_find_next_zero_bit(void *addr, int max, int start)
+{
+        int fix = 0;
+        addr = mb_correct_addr_and_bit(&fix, addr);
+        max += fix;
+        start += fix;
+
+        return ext4_find_next_zero_bit(addr, max, start) - fix;
+}
+
+static inline int mb_find_next_bit(void *addr, int max, int start)
+{
+        int fix = 0;
+        addr = mb_correct_addr_and_bit(&fix, addr);
+        max += fix;
+        start += fix;
+
+        return ext4_find_next_bit(addr, max, start) - fix;
+}
+
 static void *mb_find_buddy(struct ext4_buddy *e4b, int order, int *max)
 {
         char *bb;
@@ -906,7 +924,7 @@ static void ext4_mb_mark_free_simple(struct super_block *sb,
         unsigned short chunk;
         unsigned short border;
 
-        BUG_ON(len >= EXT4_BLOCKS_PER_GROUP(sb));
+        BUG_ON(len > EXT4_BLOCKS_PER_GROUP(sb));
 
         border = 2 << sb->s_blocksize_bits;
 
@@ -946,12 +964,12 @@ static void ext4_mb_generate_buddy(struct super_block *sb,
 
         /* initialize buddy from bitmap which is aggregation
          * of on-disk bitmap and preallocations */
-        i = ext4_find_next_zero_bit(bitmap, max, 0);
+        i = mb_find_next_zero_bit(bitmap, max, 0);
         grp->bb_first_free = i;
         while (i < max) {
                 fragments++;
                 first = i;
-                i = ext4_find_next_bit(bitmap, max, i);
+                i = mb_find_next_bit(bitmap, max, i);
                 len = i - first;
                 free += len;
                 if (len > 1)
@@ -959,7 +977,7 @@ static void ext4_mb_generate_buddy(struct super_block *sb,
                 else
                         grp->bb_counters[0]++;
                 if (i < max)
-                        i = ext4_find_next_zero_bit(bitmap, max, i);
+                        i = mb_find_next_zero_bit(bitmap, max, i);
         }
         grp->bb_fragments = fragments;
 
@@ -967,6 +985,10 @@ static void ext4_mb_generate_buddy(struct super_block *sb,
                 ext4_error(sb, __FUNCTION__,
                         "EXT4-fs: group %lu: %u blocks in bitmap, %u in gd\n",
                         group, free, grp->bb_free);
+                /*
+                 * If we intent to continue, we consider group descritor
+                 * corrupt and update bb_free using bitmap value
+                 */
                 grp->bb_free = free;
         }
 
@@ -1778,7 +1800,7 @@ static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
                 buddy = mb_find_buddy(e4b, i, &max);
                 BUG_ON(buddy == NULL);
 
-                k = ext4_find_next_zero_bit(buddy, max, 0);
+                k = mb_find_next_zero_bit(buddy, max, 0);
                 BUG_ON(k >= max);
 
                 ac->ac_found++;
@@ -1818,11 +1840,11 @@ static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
         i = e4b->bd_info->bb_first_free;
 
         while (free && ac->ac_status == AC_STATUS_CONTINUE) {
-                i = ext4_find_next_zero_bit(bitmap,
+                i = mb_find_next_zero_bit(bitmap,
                                                 EXT4_BLOCKS_PER_GROUP(sb), i);
                 if (i >= EXT4_BLOCKS_PER_GROUP(sb)) {
                         /*
-                         * IF we corrupt the bitmap  we won't find any
+                         * IF we have corrupt bitmap, we won't find any
                          * free blocks even though group info says we
                          * we have free blocks
                          */
@@ -1838,6 +1860,12 @@ static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
                         ext4_error(sb, __FUNCTION__, "%d free blocks as per "
                                         "group info. But got %d blocks\n",
                                         free, ex.fe_len);
+                        /*
+                         * The number of free blocks differs. This mostly
+                         * indicate that the bitmap is corrupt. So exit
+                         * without claiming the space.
+                         */
+                        break;
                 }
 
                 ext4_mb_measure_extent(ac, &ex, e4b);
@@ -3740,10 +3768,10 @@ static int ext4_mb_release_inode_pa(struct ext4_buddy *e4b,
         }
 
         while (bit < end) {
-                bit = ext4_find_next_zero_bit(bitmap_bh->b_data, end, bit);
+                bit = mb_find_next_zero_bit(bitmap_bh->b_data, end, bit);
                 if (bit >= end)
                         break;
-                next = ext4_find_next_bit(bitmap_bh->b_data, end, bit);
+                next = mb_find_next_bit(bitmap_bh->b_data, end, bit);
                 if (next > end)
                         next = end;
                 start = group * EXT4_BLOCKS_PER_GROUP(sb) + bit +
@@ -3771,6 +3799,10 @@ static int ext4_mb_release_inode_pa(struct ext4_buddy *e4b,
                         (unsigned long) pa->pa_len);
                 ext4_error(sb, __FUNCTION__, "free %u, pa_free %u\n",
                                                 free, pa->pa_free);
+                /*
+                 * pa is already deleted so we use the value obtained
+                 * from the bitmap and continue.
+                 */
         }
         atomic_add(free, &sbi->s_mb_discarded);
         if (ac)
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index 8c6c685b9d22..5c1e27de7755 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -43,6 +43,7 @@ static int finish_range(handle_t *handle, struct inode *inode,
 
         if (IS_ERR(path)) {
                 retval = PTR_ERR(path);
+                path = NULL;
                 goto err_out;
         }
 
@@ -74,6 +75,10 @@ static int finish_range(handle_t *handle, struct inode *inode,
         }
         retval = ext4_ext_insert_extent(handle, inode, path, &newext);
 err_out:
+        if (path) {
+                ext4_ext_drop_refs(path);
+                kfree(path);
+        }
         lb->first_pblock = 0;
         return retval;
 }
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index a9347fb43bcc..28aa2ed4297e 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1804,12 +1804,8 @@ retry:
         inode->i_fop = &ext4_dir_operations;
         inode->i_size = EXT4_I(inode)->i_disksize = inode->i_sb->s_blocksize;
         dir_block = ext4_bread (handle, inode, 0, 1, &err);
-        if (!dir_block) {
-                ext4_dec_count(handle, inode); /* is this nlink == 0? */
-                ext4_mark_inode_dirty(handle, inode);
-                iput (inode);
-                goto out_stop;
-        }
+        if (!dir_block)
+                goto out_clear_inode;
         BUFFER_TRACE(dir_block, "get_write_access");
         ext4_journal_get_write_access(handle, dir_block);
         de = (struct ext4_dir_entry_2 *) dir_block->b_data;
@@ -1832,7 +1828,8 @@ retry:
         ext4_mark_inode_dirty(handle, inode);
         err = ext4_add_entry (handle, dentry, inode);
         if (err) {
-                inode->i_nlink = 0;
+out_clear_inode:
+                clear_nlink(inode);
                 ext4_mark_inode_dirty(handle, inode);
                 iput (inode);
                 goto out_stop;
@@ -2164,7 +2161,7 @@ static int ext4_unlink(struct inode * dir, struct dentry *dentry)
         dir->i_ctime = dir->i_mtime = ext4_current_time(dir);
         ext4_update_dx_flag(dir);
         ext4_mark_inode_dirty(handle, dir);
-        ext4_dec_count(handle, inode);
+        drop_nlink(inode);
         if (!inode->i_nlink)
                 ext4_orphan_add(handle, inode);
         inode->i_ctime = ext4_current_time(inode);
@@ -2214,7 +2211,7 @@ retry:
                 err = __page_symlink(inode, symname, l,
                                 mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS);
                 if (err) {
-                        ext4_dec_count(handle, inode);
+                        clear_nlink(inode);
                         ext4_mark_inode_dirty(handle, inode);
                         iput (inode);
                         goto out_stop;
@@ -2223,7 +2220,6 @@ retry:
                 inode->i_op = &ext4_fast_symlink_inode_operations;
                 memcpy((char*)&EXT4_I(inode)->i_data,symname,l);
                 inode->i_size = l-1;
-                EXT4_I(inode)->i_flags &= ~EXT4_EXTENTS_FL;
         }
         EXT4_I(inode)->i_disksize = inode->i_size;
         err = ext4_add_nondir(handle, dentry, inode);
@@ -2407,7 +2403,7 @@ static int ext4_rename (struct inode * old_dir, struct dentry *old_dentry,
                 ext4_dec_count(handle, old_dir);
                 if (new_inode) {
                         /* checked empty_dir above, can't have another parent,
-                         * ext3_dec_count() won't work for many-linked dirs */
+                         * ext4_dec_count() won't work for many-linked dirs */
                         new_inode->i_nlink = 0;
                 } else {
                         ext4_inc_count(handle, new_dir);
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 9477a2bd6ff2..e29efa0f9d62 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1037,6 +1037,7 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
                 ext4_warning(sb, __FUNCTION__,
                              "multiple resizers run on filesystem!");
                 unlock_super(sb);
+                ext4_journal_stop(handle);
                 err = -EBUSY;
                 goto exit_put;
         }
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 038ed7436199..c6cbb6cd59b2 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -369,7 +369,7 @@ out:
 
 
 /**
- * int journal_restart() - restart a handle .
+ * int journal_restart() - restart a handle.
  * @handle:  handle to restart
  * @nblocks: nr credits requested
  *
@@ -844,8 +844,7 @@ out:
 }
 
 /**
- * int journal_get_undo_access() -  Notify intent to modify metadata with
- *     non-rewindable consequences
+ * int journal_get_undo_access() - Notify intent to modify metadata with non-rewindable consequences
  * @handle: transaction
  * @bh: buffer to undo
  * @credits: store the number of taken credits here (if not NULL)
@@ -921,12 +920,14 @@ out:
 }
 
 /**
- * int journal_dirty_data() -  mark a buffer as containing dirty data which
- *                             needs to be flushed before we can commit the
- *                             current transaction.
+ * int journal_dirty_data() - mark a buffer as containing dirty data to be flushed
  * @handle: transaction
  * @bh: bufferhead to mark
  *
+ * Description:
+ * Mark a buffer as containing dirty data which needs to be flushed before
+ * we can commit the current transaction.
+ *
  * The buffer is placed on the transaction's data list and is marked as
  * belonging to the transaction.
  *
@@ -1098,11 +1099,11 @@ no_journal:
 }
 
 /**
- * int journal_dirty_metadata() -  mark a buffer as containing dirty metadata
+ * int journal_dirty_metadata() - mark a buffer as containing dirty metadata
  * @handle: transaction to add buffer to.
  * @bh: buffer to mark
  *
- * mark dirty metadata which needs to be journaled as part of the current
+ * Mark dirty metadata which needs to be journaled as part of the current
  * transaction.
  *
  * The buffer is placed on the transaction's metadata list and is marked
diff --git a/fs/mpage.c b/fs/mpage.c
index 5df564366f36..235e4d3873a8 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -325,16 +325,12 @@ confused:
 }
 
 /**
- * mpage_readpages - populate an address space with some pages, and
- *                       start reads against them.
- *
+ * mpage_readpages - populate an address space with some pages & start reads against them
  * @mapping: the address_space
  * @pages: The address of a list_head which contains the target pages.  These
  *   pages have their ->index populated and are otherwise uninitialised.
- *
  *   The page at @pages->prev has the lowest file offset, and reads should be
  *   issued in @pages->prev to @pages->next order.
- *
  * @nr_pages: The number of pages at *@pages
  * @get_block: The filesystem's block mapper function.
  *
@@ -360,6 +356,7 @@ confused:
  * So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
  * submitted in the following order:
  *      12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
+ *
  * because the indirect block has to be read to get the mappings of blocks
  * 13,14,15,16.  Obviously, this impacts performance.
  *
@@ -656,9 +653,7 @@ out:
 }
 
 /**
- * mpage_writepages - walk the list of dirty pages of the given
- * address space and writepage() all of them.
- * 
+ * mpage_writepages - walk the list of dirty pages of the given address space & writepage() all of them
  * @mapping: address space structure to write
  * @wbc: subtract the number of written pages from *@wbc->nr_to_write
  * @get_block: the filesystem's block mapper function.
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 96ee899d6502..91a1bd67ac1d 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -314,9 +314,12 @@ static int proc_pid_schedstat(struct task_struct *task, char *buffer)
 static int lstats_show_proc(struct seq_file *m, void *v)
 {
         int i;
-        struct task_struct *task = m->private;
-        seq_puts(m, "Latency Top version : v0.1\n");
+        struct inode *inode = m->private;
+        struct task_struct *task = get_proc_task(inode);
 
+        if (!task)
+                return -ESRCH;
+        seq_puts(m, "Latency Top version : v0.1\n");
         for (i = 0; i < 32; i++) {
                 if (task->latency_record[i].backtrace[0]) {
                         int q;
@@ -341,32 +344,24 @@ static int lstats_show_proc(struct seq_file *m, void *v)
                 }
 
         }
+        put_task_struct(task);
         return 0;
 }
 
 static int lstats_open(struct inode *inode, struct file *file)
 {
-        int ret;
-        struct seq_file *m;
-        struct task_struct *task = get_proc_task(inode);
-
-        ret = single_open(file, lstats_show_proc, NULL);
-        if (!ret) {
-                m = file->private_data;
-                m->private = task;
-        }
-        return ret;
+        return single_open(file, lstats_show_proc, inode);
 }
 
 static ssize_t lstats_write(struct file *file, const char __user *buf,
                             size_t count, loff_t *offs)
 {
-        struct seq_file *m;
-        struct task_struct *task;
+        struct task_struct *task = get_proc_task(file->f_dentry->d_inode);
 
-        m = file->private_data;
-        task = m->private;
+        if (!task)
+                return -ESRCH;
         clear_all_latency_tracing(task);
+        put_task_struct(task);
 
         return count;
 }
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 21dfc9da235e..8831d9518790 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -171,7 +171,7 @@ xfs_parseargs(
         char                    *this_char, *value, *eov;
         int                     dsunit, dswidth, vol_dsunit, vol_dswidth;
         int                     iosize;
-        int                     ikeep = 0;
+        int                     dmapi_implies_ikeep = 1;
 
         args->flags |= XFSMNT_BARRIER;
         args->flags2 |= XFSMNT2_COMPAT_IOSIZE;
@@ -302,10 +302,10 @@ xfs_parseargs(
                 } else if (!strcmp(this_char, MNTOPT_NOBARRIER)) {
                         args->flags &= ~XFSMNT_BARRIER;
                 } else if (!strcmp(this_char, MNTOPT_IKEEP)) {
-                        ikeep = 1;
-                        args->flags &= ~XFSMNT_IDELETE;
+                        args->flags |= XFSMNT_IKEEP;
                 } else if (!strcmp(this_char, MNTOPT_NOIKEEP)) {
-                        args->flags |= XFSMNT_IDELETE;
+                        dmapi_implies_ikeep = 0;
+                        args->flags &= ~XFSMNT_IKEEP;
                 } else if (!strcmp(this_char, MNTOPT_LARGEIO)) {
                         args->flags2 &= ~XFSMNT2_COMPAT_IOSIZE;
                 } else if (!strcmp(this_char, MNTOPT_NOLARGEIO)) {
@@ -410,8 +410,8 @@ xfs_parseargs(
          * Note that if "ikeep" or "noikeep" mount options are
          * supplied, then they are honored.
          */
-        if (!(args->flags & XFSMNT_DMAPI) && !ikeep)
-                args->flags |= XFSMNT_IDELETE;
+        if ((args->flags & XFSMNT_DMAPI) && dmapi_implies_ikeep)
+                args->flags |= XFSMNT_IKEEP;
 
         if ((args->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) {
                 if (dsunit) {
@@ -446,6 +446,7 @@ xfs_showargs(
 {
         static struct proc_xfs_info xfs_info_set[] = {
                 /* the few simple ones we can get from the mount struct */
+                { XFS_MOUNT_IKEEP,              "," MNTOPT_IKEEP },
                 { XFS_MOUNT_WSYNC,              "," MNTOPT_WSYNC },
                 { XFS_MOUNT_INO64,              "," MNTOPT_INO64 },
                 { XFS_MOUNT_NOALIGN,            "," MNTOPT_NOALIGN },
@@ -461,7 +462,6 @@ xfs_showargs(
         };
         static struct proc_xfs_info xfs_info_unset[] = {
                 /* the few simple ones we can get from the mount struct */
-                { XFS_MOUNT_IDELETE,            "," MNTOPT_IKEEP },
                 { XFS_MOUNT_COMPAT_IOSIZE,      "," MNTOPT_LARGEIO },
                 { XFS_MOUNT_BARRIER,            "," MNTOPT_NOBARRIER },
                 { XFS_MOUNT_SMALL_INUMS,        "," MNTOPT_64BITINODE },
diff --git a/fs/xfs/xfs_bit.c b/fs/xfs/xfs_bit.c
index 48228848f5ae..fab0b6d5a41b 100644
--- a/fs/xfs/xfs_bit.c
+++ b/fs/xfs/xfs_bit.c
@@ -25,6 +25,109 @@
  * XFS bit manipulation routines, used in non-realtime code.
  */
 
+#ifndef HAVE_ARCH_HIGHBIT
+/*
+ * Index of high bit number in byte, -1 for none set, 0..7 otherwise.
+ */
+static const char xfs_highbit[256] = {
+       -1, 0, 1, 1, 2, 2, 2, 2,                 /* 00 .. 07 */
+        3, 3, 3, 3, 3, 3, 3, 3,                 /* 08 .. 0f */
+        4, 4, 4, 4, 4, 4, 4, 4,                 /* 10 .. 17 */
+        4, 4, 4, 4, 4, 4, 4, 4,                 /* 18 .. 1f */
+        5, 5, 5, 5, 5, 5, 5, 5,                 /* 20 .. 27 */
+        5, 5, 5, 5, 5, 5, 5, 5,                 /* 28 .. 2f */
+        5, 5, 5, 5, 5, 5, 5, 5,                 /* 30 .. 37 */
+        5, 5, 5, 5, 5, 5, 5, 5,                 /* 38 .. 3f */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 40 .. 47 */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 48 .. 4f */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 50 .. 57 */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 58 .. 5f */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 60 .. 67 */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 68 .. 6f */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 70 .. 77 */
+        6, 6, 6, 6, 6, 6, 6, 6,                 /* 78 .. 7f */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* 80 .. 87 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* 88 .. 8f */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* 90 .. 97 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* 98 .. 9f */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* a0 .. a7 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* a8 .. af */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* b0 .. b7 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* b8 .. bf */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* c0 .. c7 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* c8 .. cf */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* d0 .. d7 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* d8 .. df */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* e0 .. e7 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* e8 .. ef */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* f0 .. f7 */
+        7, 7, 7, 7, 7, 7, 7, 7,                 /* f8 .. ff */
+};
+#endif
+
+/*
+ * xfs_highbit32: get high bit set out of 32-bit argument, -1 if none set.
+ */
+inline int
+xfs_highbit32(
+        __uint32_t      v)
+{
+#ifdef HAVE_ARCH_HIGHBIT
+        return highbit32(v);
+#else
+        int             i;
+
+        if (v & 0xffff0000)
+                if (v & 0xff000000)
+                        i = 24;
+                else
+                        i = 16;
+        else if (v & 0x0000ffff)
+                if (v & 0x0000ff00)
+                        i = 8;
+                else
+                        i = 0;
+        else
+                return -1;
+        return i + xfs_highbit[(v >> i) & 0xff];
+#endif
+}
+
+/*
+ * xfs_lowbit64: get low bit set out of 64-bit argument, -1 if none set.
+ */
+int
+xfs_lowbit64(
+        __uint64_t      v)
+{
+        __uint32_t      w = (__uint32_t)v;
+        int             n = 0;
+
+        if (w) {        /* lower bits */
+                n = ffs(w);
+        } else {        /* upper bits */
+                w = (__uint32_t)(v >> 32);
+                if (w && (n = ffs(w)))
+                        n += 32;
+        }
+        return n - 1;
+}
+
+/*
+ * xfs_highbit64: get high bit set out of 64-bit argument, -1 if none set.
+ */
+int
+xfs_highbit64(
+        __uint64_t      v)
+{
+        __uint32_t      h = (__uint32_t)(v >> 32);
+
+        if (h)
+                return xfs_highbit32(h) + 32;
+        return xfs_highbit32((__uint32_t)v);
+}
+
+
 /*
  * Return whether bitmap is empty.
  * Size is number of words in the bitmap, which is padded to word boundary
diff --git a/fs/xfs/xfs_bit.h b/fs/xfs/xfs_bit.h
index 325a007dec91..082641a9782c 100644
--- a/fs/xfs/xfs_bit.h
+++ b/fs/xfs/xfs_bit.h
@@ -47,30 +47,13 @@ static inline __uint64_t xfs_mask64lo(int n)
 }
 
 /* Get high bit set out of 32-bit argument, -1 if none set */
-static inline int xfs_highbit32(__uint32_t v)
-{
-        return fls(v) - 1;
-}
-
-/* Get high bit set out of 64-bit argument, -1 if none set */
-static inline int xfs_highbit64(__uint64_t v)
-{
-        return fls64(v) - 1;
-}
-
-/* Get low bit set out of 32-bit argument, -1 if none set */
-static inline int xfs_lowbit32(__uint32_t v)
-{
-        __uint32_t t = v;
-        return (t) ? find_first_bit((unsigned long *)&t, 32) : -1;
-}
+extern int xfs_highbit32(__uint32_t v);
 
 /* Get low bit set out of 64-bit argument, -1 if none set */
-static inline int xfs_lowbit64(__uint64_t v)
-{
-        __uint64_t t = v;
-        return (t) ? find_first_bit((unsigned long *)&t, 64) : -1;
-}
+extern int xfs_lowbit64(__uint64_t v);
+
+/* Get high bit set out of 64-bit argument, -1 if none set */
+extern int xfs_highbit64(__uint64_t);
 
 /* Return whether bitmap is empty (1 == empty) */
 extern int xfs_bitmap_empty(uint *map, uint size);
diff --git a/fs/xfs/xfs_clnt.h b/fs/xfs/xfs_clnt.h
index d16c1b971074..d5d1e60ee224 100644
--- a/fs/xfs/xfs_clnt.h
+++ b/fs/xfs/xfs_clnt.h
@@ -86,7 +86,7 @@ struct xfs_mount_args {
 #define XFSMNT_NOUUID           0x01000000      /* Ignore fs uuid */
 #define XFSMNT_DMAPI            0x02000000      /* enable dmapi/xdsm */
 #define XFSMNT_BARRIER          0x04000000      /* use write barriers */
-#define XFSMNT_IDELETE          0x08000000      /* inode cluster delete */
+#define XFSMNT_IKEEP            0x08000000      /* inode cluster delete */
 #define XFSMNT_SWALLOC          0x10000000      /* turn on stripe width
                                                  * allocation */
 #define XFSMNT_DIRSYNC          0x40000000      /* sync creat,link,unlink,rename
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index c5836b951d0c..db9d5fa600af 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -1053,7 +1053,7 @@ xfs_difree(
         /*
          * When an inode cluster is free, it becomes eligible for removal
          */
-        if ((mp->m_flags & XFS_MOUNT_IDELETE) &&
+        if (!(mp->m_flags & XFS_MOUNT_IKEEP) &&
             (rec.ir_freecount == XFS_IALLOC_INODES(mp))) {
 
                 *delete = 1;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index f7c620ec6e69..1d8a4728d847 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -366,7 +366,7 @@ typedef struct xfs_mount {
 #define XFS_MOUNT_SMALL_INUMS   (1ULL << 15)    /* users wants 32bit inodes */
 #define XFS_MOUNT_NOUUID        (1ULL << 16)    /* ignore uuid during mount */
 #define XFS_MOUNT_BARRIER       (1ULL << 17)
-#define XFS_MOUNT_IDELETE       (1ULL << 18)    /* delete empty inode clusters*/
+#define XFS_MOUNT_IKEEP         (1ULL << 18)    /* keep empty inode clusters*/
 #define XFS_MOUNT_SWALLOC       (1ULL << 19)    /* turn on stripe width
                                                  * allocation */
 #define XFS_MOUNT_RDONLY        (1ULL << 20)    /* read-only fs */
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index ca83ddf72af4..47082c01872d 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -73,6 +73,18 @@ STATIC int xfs_rtmodify_summary(xfs_mount_t *, xfs_trans_t *, int,
  */
 
 /*
+ * xfs_lowbit32: get low bit set out of 32-bit argument, -1 if none set.
+ */
+STATIC int
+xfs_lowbit32(
+        __uint32_t      v)
+{
+        if (v)
+                return ffs(v) - 1;
+        return -1;
+}
+
+/*
  * Allocate space to the bitmap or summary file, and zero it, for growfs.
  */
 STATIC int                              /* error */
@@ -432,7 +444,6 @@ xfs_rtallocate_extent_near(
         }
         bbno = XFS_BITTOBLOCK(mp, bno);
         i = 0;
-        ASSERT(minlen != 0);
         log2len = xfs_highbit32(minlen);
         /*
          * Loop over all bitmap blocks (bbno + i is current block).
@@ -601,8 +612,6 @@ xfs_rtallocate_extent_size(
         xfs_suminfo_t   sum;            /* summary information for extents */
 
         ASSERT(minlen % prod == 0 && maxlen % prod == 0);
-        ASSERT(maxlen != 0);
-
         /*
          * Loop over all the levels starting with maxlen.
          * At each level, look at all the bitmap blocks, to see if there
@@ -660,9 +669,6 @@ xfs_rtallocate_extent_size(
                 *rtblock = NULLRTBLOCK;
                 return 0;
         }
-        ASSERT(minlen != 0);
-        ASSERT(maxlen != 0);
-
         /*
          * Loop over sizes, from maxlen down to minlen.
          * This time, when we do the allocations, allow smaller ones
@@ -1948,7 +1954,6 @@ xfs_growfs_rt(
                                   nsbp->sb_blocksize * nsbp->sb_rextsize);
                 nsbp->sb_rextents = nsbp->sb_rblocks;
                 do_div(nsbp->sb_rextents, nsbp->sb_rextsize);
-                ASSERT(nsbp->sb_rextents != 0);
                 nsbp->sb_rextslog = xfs_highbit32(nsbp->sb_rextents);
                 nrsumlevels = nmp->m_rsumlevels = nsbp->sb_rextslog + 1;
                 nrsumsize =
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index 413587f02155..7321304a69cc 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -281,8 +281,8 @@ xfs_start_flags(
                 mp->m_readio_log = mp->m_writeio_log = ap->iosizelog;
         }
 
-        if (ap->flags & XFSMNT_IDELETE)
-                mp->m_flags |= XFS_MOUNT_IDELETE;
+        if (ap->flags & XFSMNT_IKEEP)
+                mp->m_flags |= XFS_MOUNT_IKEEP;
         if (ap->flags & XFSMNT_DIRSYNC)
                 mp->m_flags |= XFS_MOUNT_DIRSYNC;
         if (ap->flags & XFSMNT_ATTR2)
diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h
index 018f6e2a0242..3ae7b548fce7 100644
--- a/include/asm-avr32/pgtable.h
+++ b/include/asm-avr32/pgtable.h
@@ -157,6 +157,7 @@ extern struct page *empty_zero_page;
 #define _PAGE_S(x)      _PAGE_NORMAL(x)
 
 #define PAGE_COPY       _PAGE_P(PAGE_WRITE | PAGE_READ)
+#define PAGE_SHARED     _PAGE_S(PAGE_WRITE | PAGE_READ)
 
 #ifndef __ASSEMBLY__
 /*
diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h
index 8265ea473d5b..4f318f1fd2d9 100644
--- a/include/asm-blackfin/gptimers.h
+++ b/include/asm-blackfin/gptimers.h
@@ -1,12 +1,11 @@
 /*
- * include/asm/bf5xx_timers.h
- *
- * This file contains the major Data structures and constants
- * used for General Purpose Timer Implementation in BF5xx
+ * gptimers.h - Blackfin General Purpose Timer structs/defines/prototypes
  *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  * Copyright (C) 2005 John DeHority
  * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
  *
+ * Licensed under the GPL-2.
  */
 
 #ifndef _BLACKFIN_TIMERS_H_
diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h
index 65480dab244e..86b67834354d 100644
--- a/include/asm-blackfin/irq.h
+++ b/include/asm-blackfin/irq.h
@@ -67,4 +67,6 @@ static __inline__ int irq_canonicalize(int irq)
 #define NO_IRQ ((unsigned int)(-1))
 #endif
 
+#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1))
+
 #endif                          /* _BFIN_IRQ_H_ */
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 15dbc21eed8b..c0694ecd2ecd 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_THR), v)
@@ -58,6 +57,7 @@
 struct bfin_serial_port {
         struct uart_port port;
         unsigned int old_status;
+        unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
         int tx_done;
         int tx_count;
@@ -67,15 +67,31 @@ struct bfin_serial_port {
         unsigned int tx_dma_channel;
         unsigned int rx_dma_channel;
         struct work_struct tx_dma_workqueue;
-#else
-        struct work_struct cts_workqueue;
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
+        struct work_struct cts_workqueue;
         int cts_pin;
         int rts_pin;
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+        unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+        uart->lsr |= (lsr & (BI|FE|PE|OE));
+        return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+        uart->lsr = 0;
+        bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
         unsigned long uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index 7871d4313f49..b6f513bee56e 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -46,6 +45,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+        unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
         int                     tx_done;
         int                     tx_count;
@@ -56,14 +56,34 @@ struct bfin_serial_port {
         unsigned int            rx_dma_channel;
         struct work_struct      tx_dma_workqueue;
 #else
-        struct work_struct      cts_workqueue;
+# if ANOMALY_05000230
+        unsigned int anomaly_threshold;
+# endif
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
+        struct work_struct      cts_workqueue;
         int                     cts_pin;
         int                     rts_pin;
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+        unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+        uart->lsr |= (lsr & (BI|FE|PE|OE));
+        return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+        uart->lsr = 0;
+        bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
         unsigned long   uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index 86e45c379838..8fc672d31057 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -58,6 +57,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+        unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
         int                     tx_done;
         int                     tx_count;
@@ -67,15 +67,31 @@ struct bfin_serial_port {
         unsigned int            tx_dma_channel;
         unsigned int            rx_dma_channel;
         struct work_struct      tx_dma_workqueue;
-#else
-        struct work_struct      cts_workqueue;
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
+        struct work_struct      cts_workqueue;
         int             cts_pin;
         int             rts_pin;
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+        unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+        uart->lsr |= (lsr & (BI|FE|PE|OE));
+        return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+        uart->lsr = 0;
+        bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
         unsigned long   uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 3770aa38ee9f..7e6339f62a50 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -24,6 +24,8 @@
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
 #define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+#define UART_GET_MSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_MSR))
+#define UART_GET_MCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_MCR))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
@@ -32,7 +34,9 @@
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LSR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_CLEAR_LSR(uart)    bfin_write16(((uart)->port.membase + OFFSET_LSR), -1)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_PUT_MCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_MCR),v)
 
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
@@ -68,10 +72,9 @@ struct bfin_serial_port {
         unsigned int            tx_dma_channel;
         unsigned int            rx_dma_channel;
         struct work_struct      tx_dma_workqueue;
-#else
-        struct work_struct      cts_workqueue;
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
+        struct work_struct      cts_workqueue;
         int             cts_pin;
         int             rts_pin;
 #endif
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 7871d4313f49..b6f513bee56e 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
 #define UART_GET_DLH(uart)      bfin_read16(((uart)->port.membase + OFFSET_DLH))
 #define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -46,6 +45,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+        unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
         int                     tx_done;
         int                     tx_count;
@@ -56,14 +56,34 @@ struct bfin_serial_port {
         unsigned int            rx_dma_channel;
         struct work_struct      tx_dma_workqueue;
 #else
-        struct work_struct      cts_workqueue;
+# if ANOMALY_05000230
+        unsigned int anomaly_threshold;
+# endif
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
+        struct work_struct      cts_workqueue;
         int                     cts_pin;
         int                     rts_pin;
 #endif
 };
 
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+        unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+        uart->lsr |= (lsr & (BI|FE|PE|OE));
+        return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+        uart->lsr = 0;
+        bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
 struct bfin_serial_port bfin_serial_ports[NR_PORTS];
 struct bfin_serial_res {
         unsigned long   uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
index 362617f93845..3a16df2c86d8 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -49,7 +49,8 @@
 #define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
 #define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
 
-
+#define SIC_IWR0 SICA_IWR0
+#define SIC_IWR1 SICA_IWR1
 #define SIC_IAR0 SICA_IAR0
 #define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0
 #define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h
index d667816486c0..1bc8d2f89ccc 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/include/asm-blackfin/mach-bf561/cdefBF561.h
@@ -559,6 +559,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
 #define bfin_write_PPI0_CONTROL(val)         bfin_write16(PPI0_CONTROL,val)
 #define bfin_read_PPI0_STATUS()              bfin_read16(PPI0_STATUS)
 #define bfin_write_PPI0_STATUS(val)          bfin_write16(PPI0_STATUS,val)
+#define bfin_clear_PPI0_STATUS()             bfin_read_PPI0_STATUS()
 #define bfin_read_PPI0_COUNT()               bfin_read16(PPI0_COUNT)
 #define bfin_write_PPI0_COUNT(val)           bfin_write16(PPI0_COUNT,val)
 #define bfin_read_PPI0_DELAY()               bfin_read16(PPI0_DELAY)
@@ -570,6 +571,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
 #define bfin_write_PPI1_CONTROL(val)         bfin_write16(PPI1_CONTROL,val)
 #define bfin_read_PPI1_STATUS()              bfin_read16(PPI1_STATUS)
 #define bfin_write_PPI1_STATUS(val)          bfin_write16(PPI1_STATUS,val)
+#define bfin_clear_PPI1_STATUS()             bfin_read_PPI1_STATUS()
 #define bfin_read_PPI1_COUNT()               bfin_read16(PPI1_COUNT)
 #define bfin_write_PPI1_COUNT(val)           bfin_write16(PPI1_COUNT,val)
 #define bfin_read_PPI1_DELAY()               bfin_read16(PPI1_DELAY)
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
index 050eae87ff01..a6bdac61ab49 100644
--- a/include/asm-mips/mach-db1x00/db1200.h
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -25,6 +25,7 @@
 #define __ASM_DB1200_H
 
 #include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
 
 // This is defined in au1000.h with bogus value
 #undef AU1X00_EXTERNAL_INT
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
index 0f5f4c29f4e8..e7a88ba35833 100644
--- a/include/asm-mips/mach-db1x00/db1x00.h
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -28,6 +28,7 @@
 #ifndef __ASM_DB1X00_H
 #define __ASM_DB1X00_H
 
+#include <asm/mach-au1x00/au1xxx_psc.h>
 
 #ifdef CONFIG_MIPS_DB1550
 
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
index d9f384acfea9..ed5fd7390678 100644
--- a/include/asm-mips/mach-pb1x00/pb1200.h
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -25,6 +25,7 @@
 #define __ASM_PB1200_H
 
 #include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
 
 // This is defined in au1000.h with bogus value
 #undef AU1X00_EXTERNAL_INT
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
index 9a4955ce3b4a..c2ab0e2df4ae 100644
--- a/include/asm-mips/mach-pb1x00/pb1550.h
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -28,6 +28,7 @@
 #define __ASM_PB1550_H
 
 #include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
 
 #define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
 #define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index 0d6238987df8..edc0cfd7f6e2 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -153,6 +153,9 @@
 #define   CTRL_RUNLATCH 0x1
 #define SPRN_DABR       0x3F5   /* Data Address Breakpoint Register */
 #define   DABR_TRANSLATION      (1UL << 2)
+#define SPRN_DABRX      0x3F7   /* Data Address Breakpoint Register Extension */
+#define   DABRX_USER    (1UL << 0)
+#define   DABRX_KERNEL  (1UL << 1)
 #define SPRN_DAR        0x013   /* Data Address Register */
 #define SPRN_DSISR      0x012   /* Data Storage Interrupt Status Register */
 #define   DSISR_NOHPTE          0x40000000      /* no translation found */
diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h
index 56bd838b7db4..bee2d81c56bf 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/include/asm-sh/cpu-sh3/cache.h
@@ -35,7 +35,7 @@
     defined(CONFIG_CPU_SUBTYPE_SH7710) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define CCR3    0xa40000b4
+#define CCR3_REG        0xa40000b4
 #define CCR_CACHE_16KB  0x00010000
 #define CCR_CACHE_32KB  0x00020000
 #endif
diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S
index 500030eae7aa..2dab0b8d9454 100644
--- a/include/asm-sh/entry-macros.S
+++ b/include/asm-sh/entry-macros.S
@@ -12,7 +12,7 @@
         not     r11, r11
         stc     sr, r10
         and     r11, r10
-#ifdef CONFIG_HAS_SR_RB
+#ifdef CONFIG_CPU_HAS_SR_RB
         stc     k_g_imask, r11
         or      r11, r10
 #endif
@@ -20,7 +20,7 @@
         .endm
 
         .macro  get_current_thread_info, ti, tmp
-#ifdef CONFIG_HAS_SR_RB
+#ifdef CONFIG_CPU_HAS_SR_RB
         stc     r7_bank, \ti
 #else
         mov     #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
diff --git a/include/asm-x86/futex.h b/include/asm-x86/futex.h
index cd9f894dd2d7..c9952ea9f698 100644
--- a/include/asm-x86/futex.h
+++ b/include/asm-x86/futex.h
@@ -102,6 +102,13 @@ futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
 static inline int
 futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 {
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
+        /* Real i386 machines have no cmpxchg instruction */
+        if (boot_cpu_data.x86 == 3)
+                return -ENOSYS;
+#endif
+
         if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
                 return -EFAULT;
 
diff --git a/include/asm-x86/lguest.h b/include/asm-x86/lguest.h
index 4d9367b72976..9b17571e9bc3 100644
--- a/include/asm-x86/lguest.h
+++ b/include/asm-x86/lguest.h
@@ -23,6 +23,17 @@
 /* Found in switcher.S */
 extern unsigned long default_idt_entries[];
 
+/* Declarations for definitions in lguest_guest.S */
+extern char lguest_noirq_start[], lguest_noirq_end[];
+extern const char lgstart_cli[], lgend_cli[];
+extern const char lgstart_sti[], lgend_sti[];
+extern const char lgstart_popf[], lgend_popf[];
+extern const char lgstart_pushf[], lgend_pushf[];
+extern const char lgstart_iret[], lgend_iret[];
+
+extern void lguest_iret(void);
+extern void lguest_init(void);
+
 struct lguest_regs
 {
         /* Manually saved part. */
diff --git a/include/asm-x86/nops.h b/include/asm-x86/nops.h
index fec025c7f58c..e3b2bce0aff8 100644
--- a/include/asm-x86/nops.h
+++ b/include/asm-x86/nops.h
@@ -3,17 +3,29 @@
 
 /* Define nops for use with alternative() */
 
-/* generic versions from gas */
-#define GENERIC_NOP1    ".byte 0x90\n"
-#define GENERIC_NOP2            ".byte 0x89,0xf6\n"
-#define GENERIC_NOP3        ".byte 0x8d,0x76,0x00\n"
-#define GENERIC_NOP4        ".byte 0x8d,0x74,0x26,0x00\n"
-#define GENERIC_NOP5        GENERIC_NOP1 GENERIC_NOP4
-#define GENERIC_NOP6    ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP7    ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP8    GENERIC_NOP1 GENERIC_NOP7
+/* generic versions from gas
+   1: nop
+   2: movl %esi,%esi
+   3: leal 0x00(%esi),%esi
+   4: leal 0x00(,%esi,1),%esi
+   6: leal 0x00000000(%esi),%esi
+   7: leal 0x00000000(,%esi,1),%esi
+*/
+#define GENERIC_NOP1 ".byte 0x90\n"
+#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
+#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
+#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
+#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
+#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
 
-/* Opteron 64bit nops */
+/* Opteron 64bit nops
+   1: nop
+   2: osp nop
+   3: osp osp nop
+   4: osp osp osp nop
+*/
 #define K8_NOP1 GENERIC_NOP1
 #define K8_NOP2 ".byte 0x66,0x90\n"
 #define K8_NOP3 ".byte 0x66,0x66,0x90\n"
@@ -23,19 +35,35 @@
 #define K8_NOP7 K8_NOP4 K8_NOP3
 #define K8_NOP8 K8_NOP4 K8_NOP4
 
-/* K7 nops */
-/* uses eax dependencies (arbitary choice) */
-#define K7_NOP1  GENERIC_NOP1
+/* K7 nops
+   uses eax dependencies (arbitary choice)
+   1: nop
+   2: movl %eax,%eax
+   3: leal (,%eax,1),%eax
+   4: leal 0x00(,%eax,1),%eax
+   6: leal 0x00000000(%eax),%eax
+   7: leal 0x00000000(,%eax,1),%eax
+*/
+#define K7_NOP1 GENERIC_NOP1
 #define K7_NOP2 ".byte 0x8b,0xc0\n"
 #define K7_NOP3 ".byte 0x8d,0x04,0x20\n"
 #define K7_NOP4 ".byte 0x8d,0x44,0x20,0x00\n"
 #define K7_NOP5 K7_NOP4 ASM_NOP1
 #define K7_NOP6 ".byte 0x8d,0x80,0,0,0,0\n"
-#define K7_NOP7        ".byte 0x8D,0x04,0x05,0,0,0,0\n"
-#define K7_NOP8        K7_NOP7 ASM_NOP1
+#define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n"
+#define K7_NOP8 K7_NOP7 ASM_NOP1
 
-/* P6 nops */
-/* uses eax dependencies (Intel-recommended choice) */
+/* P6 nops
+   uses eax dependencies (Intel-recommended choice)
+   1: nop
+   2: osp nop
+   3: nopl (%eax)
+   4: nopl 0x00(%eax)
+   5: nopl 0x00(%eax,%eax,1)
+   6: osp nopl 0x00(%eax,%eax,1)
+   7: nopl 0x00000000(%eax)
+   8: nopl 0x00000000(%eax,%eax,1)
+*/
 #define P6_NOP1 GENERIC_NOP1
 #define P6_NOP2 ".byte 0x66,0x90\n"
 #define P6_NOP3 ".byte 0x0f,0x1f,0x00\n"
@@ -63,9 +91,7 @@
 #define ASM_NOP6 K7_NOP6
 #define ASM_NOP7 K7_NOP7
 #define ASM_NOP8 K7_NOP8
-#elif defined(CONFIG_M686) || defined(CONFIG_MPENTIUMII) || \
-      defined(CONFIG_MPENTIUMIII) || defined(CONFIG_MPENTIUMM) || \
-      defined(CONFIG_MCORE2) || defined(CONFIG_PENTIUM4)
+#elif defined(CONFIG_X86_P6_NOP)
 #define ASM_NOP1 P6_NOP1
 #define ASM_NOP2 P6_NOP2
 #define ASM_NOP3 P6_NOP3
diff --git a/include/asm-x86/page_64.h b/include/asm-x86/page_64.h
index f7393bc516ef..143546073b95 100644
--- a/include/asm-x86/page_64.h
+++ b/include/asm-x86/page_64.h
@@ -47,8 +47,12 @@
 #define __PHYSICAL_MASK_SHIFT   46
 #define __VIRTUAL_MASK_SHIFT    48
 
-#define KERNEL_TEXT_SIZE  (40*1024*1024)
-#define KERNEL_TEXT_START _AC(0xffffffff80000000, UL)
+/*
+ * Kernel image size is limited to 128 MB (see level2_kernel_pgt in
+ * arch/x86/kernel/head_64.S), and it is mapped here:
+ */
+#define KERNEL_IMAGE_SIZE       (128*1024*1024)
+#define KERNEL_IMAGE_START      _AC(0xffffffff80000000, UL)
 
 #ifndef __ASSEMBLY__
 void clear_page(void *page);
diff --git a/include/asm-x86/ptrace-abi.h b/include/asm-x86/ptrace-abi.h
index 81a8ee4c55fc..f224eb3c3157 100644
--- a/include/asm-x86/ptrace-abi.h
+++ b/include/asm-x86/ptrace-abi.h
@@ -89,13 +89,13 @@
 */
 struct ptrace_bts_config {
         /* requested or actual size of BTS buffer in bytes */
-        u32 size;
+        __u32 size;
         /* bitmask of below flags */
-        u32 flags;
+        __u32 flags;
         /* buffer overflow signal */
-        u32 signal;
+        __u32 signal;
         /* actual size of bts_struct in bytes */
-        u32 bts_size;
+        __u32 bts_size;
 };
 #endif
 
diff --git a/include/linux/connector.h b/include/linux/connector.h
index da6dd957f908..96a89d3d6727 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -170,7 +170,5 @@ int cn_cb_equal(struct cb_id *, struct cb_id *);
 
 void cn_queue_wrapper(struct work_struct *work);
 
-extern int cn_already_initialized;
-
 #endif                          /* __KERNEL__ */
 #endif                          /* __CONNECTOR_H */
diff --git a/include/linux/elfcore-compat.h b/include/linux/elfcore-compat.h
index 532d13adabc4..0a90e1c3a422 100644
--- a/include/linux/elfcore-compat.h
+++ b/include/linux/elfcore-compat.h
@@ -45,8 +45,8 @@ struct compat_elf_prpsinfo
         char                            pr_zomb;
         char                            pr_nice;
         compat_ulong_t                  pr_flag;
-        compat_uid_t                    pr_uid;
-        compat_gid_t                    pr_gid;
+        __compat_uid_t                  pr_uid;
+        __compat_gid_t                  pr_gid;
         compat_pid_t                    pr_pid, pr_ppid, pr_pgrp, pr_sid;
         char                            pr_fname[16];
         char                            pr_psargs[ELF_PRARGSZ];
diff --git a/include/linux/ext4_fs_extents.h b/include/linux/ext4_fs_extents.h
index 697da4bce6c5..1285c583b2d8 100644
--- a/include/linux/ext4_fs_extents.h
+++ b/include/linux/ext4_fs_extents.h
@@ -227,5 +227,6 @@ extern int ext4_ext_search_left(struct inode *, struct ext4_ext_path *,
                                                 ext4_lblk_t *, ext4_fsblk_t *);
 extern int ext4_ext_search_right(struct inode *, struct ext4_ext_path *,
                                                 ext4_lblk_t *, ext4_fsblk_t *);
+extern void ext4_ext_drop_refs(struct ext4_ext_path *);
 #endif /* _LINUX_EXT4_EXTENTS */
 
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 2961ec788046..49829988bfa0 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -109,6 +109,14 @@ static inline void account_system_vtime(struct task_struct *tsk)
 }
 #endif
 
+#if defined(CONFIG_PREEMPT_RCU) && defined(CONFIG_NO_HZ)
+extern void rcu_irq_enter(void);
+extern void rcu_irq_exit(void);
+#else
+# define rcu_irq_enter() do { } while (0)
+# define rcu_irq_exit() do { } while (0)
+#endif /* CONFIG_PREEMPT_RCU */
+
 /*
  * It is safe to do non-atomic ops on ->hardirq_context,
  * because NMI handlers may not preempt and the ops are
@@ -117,6 +125,7 @@ static inline void account_system_vtime(struct task_struct *tsk)
  */
 #define __irq_enter()                                   \
         do {                                            \
+                rcu_irq_enter();                        \
                 account_system_vtime(current);          \
                 add_preempt_count(HARDIRQ_OFFSET);      \
                 trace_hardirq_enter();                  \
@@ -135,6 +144,7 @@ extern void irq_enter(void);
                 trace_hardirq_exit();                   \
                 account_system_vtime(current);          \
                 sub_preempt_count(HARDIRQ_OFFSET);      \
+                rcu_irq_exit();                         \
         } while (0)
 
 /*
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 76014f8f3c60..365e0df3646b 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -271,9 +271,16 @@ extern void i2c_unregister_device(struct i2c_client *);
  * This is done at arch_initcall time, before declaring any i2c adapters.
  * Modules for add-on boards must use other calls.
  */
+#ifdef CONFIG_I2C_BOARDINFO
 extern int
 i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n);
-
+#else
+static inline int
+i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n)
+{
+        return 0;
+}
+#endif
 
 /*
  * The following structs are for those who like to implement new bus drivers:
@@ -598,7 +605,7 @@ I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan "	\
                        "additionally");                                 \
 I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to "  \
                        "scan");                                         \
-const static struct i2c_client_address_data addr_data = {               \
+static const struct i2c_client_address_data addr_data = {               \
         .normal_i2c     = normal_i2c,                                   \
         .probe          = probe,                                        \
         .ignore         = ignore,                                       \
diff --git a/include/linux/maple.h b/include/linux/maple.h
index 3f01e2bae1a1..d31e36ebb436 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -64,7 +64,6 @@ struct maple_driver {
         int (*connect) (struct maple_device * dev);
         void (*disconnect) (struct maple_device * dev);
         struct device_driver drv;
-        int registered;
 };
 
 void maple_getcond_callback(struct maple_device *dev,
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index b74b615492e8..f0680c2bee73 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -31,7 +31,7 @@
 #define NF_VERDICT_QMASK 0xffff0000
 #define NF_VERDICT_QBITS 16
 
-#define NF_QUEUE_NR(x) (((x << NF_VERDICT_QBITS) & NF_VERDICT_QMASK) | NF_QUEUE)
+#define NF_QUEUE_NR(x) ((((x) << NF_VERDICT_BITS) & NF_VERDICT_QMASK) | NF_QUEUE)
 
 /* only for userspace compatibility */
 #ifndef __KERNEL__
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index 4d6624260b4c..b3dccd68629e 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -160,5 +160,8 @@ extern void rcu_restart_cpu(int cpu);
 extern long rcu_batches_completed(void);
 extern long rcu_batches_completed_bh(void);
 
+#define rcu_enter_nohz()        do { } while (0)
+#define rcu_exit_nohz()         do { } while (0)
+
 #endif /* __KERNEL__ */
 #endif /* __LINUX_RCUCLASSIC_H */
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index 60c2a033b19e..01152ed532c8 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -82,5 +82,27 @@ extern struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu);
 
 struct softirq_action;
 
+#ifdef CONFIG_NO_HZ
+DECLARE_PER_CPU(long, dynticks_progress_counter);
+
+static inline void rcu_enter_nohz(void)
+{
+        __get_cpu_var(dynticks_progress_counter)++;
+        WARN_ON(__get_cpu_var(dynticks_progress_counter) & 0x1);
+        mb();
+}
+
+static inline void rcu_exit_nohz(void)
+{
+        mb();
+        __get_cpu_var(dynticks_progress_counter)++;
+        WARN_ON(!(__get_cpu_var(dynticks_progress_counter) & 0x1));
+}
+
+#else /* CONFIG_NO_HZ */
+#define rcu_enter_nohz()        do { } while (0)
+#define rcu_exit_nohz()         do { } while (0)
+#endif /* CONFIG_NO_HZ */
+
 #endif /* __KERNEL__ */
 #endif /* __LINUX_RCUPREEMPT_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index e217d188a102..2c9621f8bf87 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -242,6 +242,7 @@ struct task_struct;
 
 extern void sched_init(void);
 extern void sched_init_smp(void);
+extern asmlinkage void schedule_tail(struct task_struct *prev);
 extern void init_idle(struct task_struct *idle, int cpu);
 extern void init_idle_bootup_task(struct task_struct *idle);
 
@@ -1189,7 +1190,7 @@ struct task_struct {
         int softirq_context;
 #endif
 #ifdef CONFIG_LOCKDEP
-# define MAX_LOCK_DEPTH 30UL
+# define MAX_LOCK_DEPTH 48UL
         u64 curr_chain_key;
         int lockdep_depth;
         struct held_lock held_locks[MAX_LOCK_DEPTH];
diff --git a/include/asm-sh/sci.h b/include/linux/serial_sci.h
index 52e73660c129..893cc53486bc 100644
--- a/include/asm-sh/sci.h
+++ b/include/linux/serial_sci.h
@@ -1,12 +1,10 @@
-#ifndef __ASM_SH_SCI_H
-#define __ASM_SH_SCI_H
+#ifndef __LINUX_SERIAL_SCI_H
+#define __LINUX_SERIAL_SCI_H
 
 #include <linux/serial_core.h>
 
 /*
- * Generic header for SuperH SCI(F)
- *
- * Do not place SH-specific parts in here, sh64 and h8300 depend on this too.
+ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
  */
 
 /* Offsets into the sci_port->irqs array */
@@ -31,4 +29,4 @@ struct plat_sci_port {
 
 int early_sci_setup(struct uart_port *port);
 
-#endif /* __ASM_SH_SCI_H */
+#endif /* __LINUX_SERIAL_SCI_H */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 2372e2e6b527..5bd3ae8aaaf4 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -781,8 +781,7 @@ static inline int usb_endpoint_is_isoc_out(
         .idVendor = (vend), \
         .idProduct = (prod)
 /**
- * USB_DEVICE_VER - macro used to describe a specific usb device with a
- *              version range
+ * USB_DEVICE_VER - describe a specific usb device with a version range
  * @vend: the 16 bit USB Vendor ID
  * @prod: the 16 bit USB Product ID
  * @lo: the bcdDevice_lo value
@@ -799,8 +798,7 @@ static inline int usb_endpoint_is_isoc_out(
         .bcdDevice_hi = (hi)
 
 /**
- * USB_DEVICE_INTERFACE_PROTOCOL - macro used to describe a usb
- *              device with a specific interface protocol
+ * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol
  * @vend: the 16 bit USB Vendor ID
  * @prod: the 16 bit USB Product ID
  * @pr: bInterfaceProtocol value
@@ -846,8 +844,7 @@ static inline int usb_endpoint_is_isoc_out(
         .bInterfaceProtocol = (pr)
 
 /**
- * USB_DEVICE_AND_INTERFACE_INFO - macro used to describe a specific usb device
- *              with a class of usb interfaces
+ * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces
  * @vend: the 16 bit USB Vendor ID
  * @prod: the 16 bit USB Product ID
  * @cl: bInterfaceClass value
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 75370ec0923e..9f1b4b46151e 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -246,8 +246,7 @@ static inline void __dec_zone_state(struct zone *zone, enum zone_stat_item item)
 static inline void __dec_zone_page_state(struct page *page,
                         enum zone_stat_item item)
 {
-        atomic_long_dec(&page_zone(page)->vm_stat[item]);
-        atomic_long_dec(&vm_stat[item]);
+        __dec_zone_state(page_zone(page), item);
 }
 
 /*
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 9462d6ae2f37..9619b9d35c9e 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -411,6 +411,7 @@ struct sctp_event_subscribe {
         __u8 sctp_shutdown_event;
         __u8 sctp_partial_delivery_event;
         __u8 sctp_adaptation_layer_event;
+        __u8 sctp_authentication_event;
 };
 
 /*
@@ -587,7 +588,7 @@ struct sctp_authchunk {
  * endpoint requires the peer to use.
 */
 struct sctp_hmacalgo {
-        __u16           shmac_num_idents;
+        __u32           shmac_num_idents;
         __u16           shmac_idents[];
 };
 
@@ -600,7 +601,7 @@ struct sctp_hmacalgo {
 struct sctp_authkey {
         sctp_assoc_t    sca_assoc_id;
         __u16           sca_keynumber;
-        __u16           sca_keylen;
+        __u16           sca_keylength;
         __u8            sca_key[];
 };
 
@@ -693,8 +694,9 @@ struct sctp_status {
  * the peer requires to be received authenticated only.
  */
 struct sctp_authchunks {
-        sctp_assoc_t            gauth_assoc_id;
-        uint8_t                 gauth_chunks[];
+        sctp_assoc_t    gauth_assoc_id;
+        __u32           gauth_number_of_chunks;
+        uint8_t         gauth_chunks[];
 };
 
 /*
diff --git a/kernel/audit.c b/kernel/audit.c
index 2eeea9a14240..10c4930c2bbf 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -170,7 +170,9 @@ void audit_panic(const char *message)
                         printk(KERN_ERR "audit: %s\n", message);
                 break;
         case AUDIT_FAIL_PANIC:
-                panic("audit: %s\n", message);
+                /* test audit_pid since printk is always losey, why bother? */
+                if (audit_pid)
+                        panic("audit: %s\n", message);
                 break;
         }
 }
@@ -352,6 +354,7 @@ static int kauditd_thread(void *dummy)
                                 if (err < 0) {
                                         BUG_ON(err != -ECONNREFUSED); /* Shoudn't happen */
                                         printk(KERN_ERR "audit: *NO* daemon at audit_pid=%d\n", audit_pid);
+                                        audit_log_lost("auditd dissapeared\n");
                                         audit_pid = 0;
                                 }
                         } else {
@@ -1350,17 +1353,19 @@ void audit_log_end(struct audit_buffer *ab)
         if (!audit_rate_check()) {
                 audit_log_lost("rate limit exceeded");
         } else {
+                struct nlmsghdr *nlh = nlmsg_hdr(ab->skb);
                 if (audit_pid) {
-                        struct nlmsghdr *nlh = nlmsg_hdr(ab->skb);
                         nlh->nlmsg_len = ab->skb->len - NLMSG_SPACE(0);
                         skb_queue_tail(&audit_skb_queue, ab->skb);
                         ab->skb = NULL;
                         wake_up_interruptible(&kauditd_wait);
-                } else if (printk_ratelimit()) {
-                        struct nlmsghdr *nlh = nlmsg_hdr(ab->skb);
-                        printk(KERN_NOTICE "type=%d %s\n", nlh->nlmsg_type, ab->skb->data + NLMSG_SPACE(0));
-                } else {
-                        audit_log_lost("printk limit exceeded\n");
+                } else if (nlh->nlmsg_type != AUDIT_EOE) {
+                        if (printk_ratelimit()) {
+                                printk(KERN_NOTICE "type=%d %s\n",
+                                        nlh->nlmsg_type,
+                                        ab->skb->data + NLMSG_SPACE(0));
+                        } else
+                                audit_log_lost("printk limit exceeded\n");
                 }
         }
         audit_buffer_free(ab);
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 2087d6de67ea..782262e4107d 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1070,7 +1070,7 @@ static int audit_log_single_execve_arg(struct audit_context *context,
                  * so we can be sure nothing was lost.
                  */
                 if ((i == 0) && (too_long))
-                        audit_log_format(*ab, "a%d_len=%ld ", arg_num,
+                        audit_log_format(*ab, "a%d_len=%zu ", arg_num,
                                          has_cntl ? 2*len : len);
 
                 /*
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 3574379f4d62..81a4e4a3f087 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -779,6 +779,10 @@ register_lock_class(struct lockdep_map *lock, unsigned int subclass, int force)
          * parallel walking of the hash-list safe:
          */
         list_add_tail_rcu(&class->hash_entry, hash_head);
+        /*
+         * Add it to the global list of classes:
+         */
+        list_add_tail_rcu(&class->lock_entry, &all_lock_classes);
 
         if (verbose(class)) {
                 graph_unlock();
@@ -2282,10 +2286,6 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
                         return 0;
                 break;
         case LOCK_USED:
-                /*
-                 * Add it to the global list of classes:
-                 */
-                list_add_tail_rcu(&this->class->lock_entry, &all_lock_classes);
                 debug_atomic_dec(&nr_unused_locks);
                 break;
         default:
diff --git a/kernel/printk.c b/kernel/printk.c
index bee36100f110..9adc2a473e6e 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -666,7 +666,7 @@ asmlinkage int vprintk(const char *fmt, va_list args)
         }
         /* Emit the output into the temporary buffer */
         printed_len += vscnprintf(printk_buf + printed_len,
-                                  sizeof(printk_buf), fmt, args);
+                                  sizeof(printk_buf) - printed_len, fmt, args);
 
         /*
          * Copy the output into log_buf.  If the caller didn't provide
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index 987cfb7ade89..e9517014b57c 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -23,6 +23,10 @@
  *              to Suparna Bhattacharya for pushing me completely away
  *              from atomic instructions on the read side.
  *
+ *  - Added handling of Dynamic Ticks
+ *      Copyright 2007 - Paul E. Mckenney <paulmck@us.ibm.com>
+ *                     - Steven Rostedt <srostedt@redhat.com>
+ *
  * Papers:  http://www.rdrop.com/users/paulmck/RCU
  *
  * Design Document: http://lwn.net/Articles/253651/
@@ -409,6 +413,212 @@ static void __rcu_advance_callbacks(struct rcu_data *rdp)
         }
 }
 
+#ifdef CONFIG_NO_HZ
+
+DEFINE_PER_CPU(long, dynticks_progress_counter) = 1;
+static DEFINE_PER_CPU(long, rcu_dyntick_snapshot);
+static DEFINE_PER_CPU(int, rcu_update_flag);
+
+/**
+ * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI.
+ *
+ * If the CPU was idle with dynamic ticks active, this updates the
+ * dynticks_progress_counter to let the RCU handling know that the
+ * CPU is active.
+ */
+void rcu_irq_enter(void)
+{
+        int cpu = smp_processor_id();
+
+        if (per_cpu(rcu_update_flag, cpu))
+                per_cpu(rcu_update_flag, cpu)++;
+
+        /*
+         * Only update if we are coming from a stopped ticks mode
+         * (dynticks_progress_counter is even).
+         */
+        if (!in_interrupt() &&
+            (per_cpu(dynticks_progress_counter, cpu) & 0x1) == 0) {
+                /*
+                 * The following might seem like we could have a race
+                 * with NMI/SMIs. But this really isn't a problem.
+                 * Here we do a read/modify/write, and the race happens
+                 * when an NMI/SMI comes in after the read and before
+                 * the write. But NMI/SMIs will increment this counter
+                 * twice before returning, so the zero bit will not
+                 * be corrupted by the NMI/SMI which is the most important
+                 * part.
+                 *
+                 * The only thing is that we would bring back the counter
+                 * to a postion that it was in during the NMI/SMI.
+                 * But the zero bit would be set, so the rest of the
+                 * counter would again be ignored.
+                 *
+                 * On return from the IRQ, the counter may have the zero
+                 * bit be 0 and the counter the same as the return from
+                 * the NMI/SMI. If the state machine was so unlucky to
+                 * see that, it still doesn't matter, since all
+                 * RCU read-side critical sections on this CPU would
+                 * have already completed.
+                 */
+                per_cpu(dynticks_progress_counter, cpu)++;
+                /*
+                 * The following memory barrier ensures that any
+                 * rcu_read_lock() primitives in the irq handler
+                 * are seen by other CPUs to follow the above
+                 * increment to dynticks_progress_counter. This is
+                 * required in order for other CPUs to correctly
+                 * determine when it is safe to advance the RCU
+                 * grace-period state machine.
+                 */
+                smp_mb(); /* see above block comment. */
+                /*
+                 * Since we can't determine the dynamic tick mode from
+                 * the dynticks_progress_counter after this routine,
+                 * we use a second flag to acknowledge that we came
+                 * from an idle state with ticks stopped.
+                 */
+                per_cpu(rcu_update_flag, cpu)++;
+                /*
+                 * If we take an NMI/SMI now, they will also increment
+                 * the rcu_update_flag, and will not update the
+                 * dynticks_progress_counter on exit. That is for
+                 * this IRQ to do.
+                 */
+        }
+}
+
+/**
+ * rcu_irq_exit - Called from exiting Hard irq context.
+ *
+ * If the CPU was idle with dynamic ticks active, update the
+ * dynticks_progress_counter to put let the RCU handling be
+ * aware that the CPU is going back to idle with no ticks.
+ */
+void rcu_irq_exit(void)
+{
+        int cpu = smp_processor_id();
+
+        /*
+         * rcu_update_flag is set if we interrupted the CPU
+         * when it was idle with ticks stopped.
+         * Once this occurs, we keep track of interrupt nesting
+         * because a NMI/SMI could also come in, and we still
+         * only want the IRQ that started the increment of the
+         * dynticks_progress_counter to be the one that modifies
+         * it on exit.
+         */
+        if (per_cpu(rcu_update_flag, cpu)) {
+                if (--per_cpu(rcu_update_flag, cpu))
+                        return;
+
+                /* This must match the interrupt nesting */
+                WARN_ON(in_interrupt());
+
+                /*
+                 * If an NMI/SMI happens now we are still
+                 * protected by the dynticks_progress_counter being odd.
+                 */
+
+                /*
+                 * The following memory barrier ensures that any
+                 * rcu_read_unlock() primitives in the irq handler
+                 * are seen by other CPUs to preceed the following
+                 * increment to dynticks_progress_counter. This
+                 * is required in order for other CPUs to determine
+                 * when it is safe to advance the RCU grace-period
+                 * state machine.
+                 */
+                smp_mb(); /* see above block comment. */
+                per_cpu(dynticks_progress_counter, cpu)++;
+                WARN_ON(per_cpu(dynticks_progress_counter, cpu) & 0x1);
+        }
+}
+
+static void dyntick_save_progress_counter(int cpu)
+{
+        per_cpu(rcu_dyntick_snapshot, cpu) =
+                per_cpu(dynticks_progress_counter, cpu);
+}
+
+static inline int
+rcu_try_flip_waitack_needed(int cpu)
+{
+        long curr;
+        long snap;
+
+        curr = per_cpu(dynticks_progress_counter, cpu);
+        snap = per_cpu(rcu_dyntick_snapshot, cpu);
+        smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
+
+        /*
+         * If the CPU remained in dynticks mode for the entire time
+         * and didn't take any interrupts, NMIs, SMIs, or whatever,
+         * then it cannot be in the middle of an rcu_read_lock(), so
+         * the next rcu_read_lock() it executes must use the new value
+         * of the counter.  So we can safely pretend that this CPU
+         * already acknowledged the counter.
+         */
+
+        if ((curr == snap) && ((curr & 0x1) == 0))
+                return 0;
+
+        /*
+         * If the CPU passed through or entered a dynticks idle phase with
+         * no active irq handlers, then, as above, we can safely pretend
+         * that this CPU already acknowledged the counter.
+         */
+
+        if ((curr - snap) > 2 || (snap & 0x1) == 0)
+                return 0;
+
+        /* We need this CPU to explicitly acknowledge the counter flip. */
+
+        return 1;
+}
+
+static inline int
+rcu_try_flip_waitmb_needed(int cpu)
+{
+        long curr;
+        long snap;
+
+        curr = per_cpu(dynticks_progress_counter, cpu);
+        snap = per_cpu(rcu_dyntick_snapshot, cpu);
+        smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
+
+        /*
+         * If the CPU remained in dynticks mode for the entire time
+         * and didn't take any interrupts, NMIs, SMIs, or whatever,
+         * then it cannot have executed an RCU read-side critical section
+         * during that time, so there is no need for it to execute a
+         * memory barrier.
+         */
+
+        if ((curr == snap) && ((curr & 0x1) == 0))
+                return 0;
+
+        /*
+         * If the CPU either entered or exited an outermost interrupt,
+         * SMI, NMI, or whatever handler, then we know that it executed
+         * a memory barrier when doing so.  So we don't need another one.
+         */
+        if (curr != snap)
+                return 0;
+
+        /* We need the CPU to execute a memory barrier. */
+
+        return 1;
+}
+
+#else /* !CONFIG_NO_HZ */
+
+# define dyntick_save_progress_counter(cpu)     do { } while (0)
+# define rcu_try_flip_waitack_needed(cpu)       (1)
+# define rcu_try_flip_waitmb_needed(cpu)        (1)
+
+#endif /* CONFIG_NO_HZ */
+
 /*
  * Get here when RCU is idle.  Decide whether we need to
  * move out of idle state, and return non-zero if so.
@@ -447,8 +657,10 @@ rcu_try_flip_idle(void)
 
         /* Now ask each CPU for acknowledgement of the flip. */
 
-        for_each_cpu_mask(cpu, rcu_cpu_online_map)
+        for_each_cpu_mask(cpu, rcu_cpu_online_map) {
                 per_cpu(rcu_flip_flag, cpu) = rcu_flipped;
+                dyntick_save_progress_counter(cpu);
+        }
 
         return 1;
 }
@@ -464,7 +676,8 @@ rcu_try_flip_waitack(void)
 
         RCU_TRACE_ME(rcupreempt_trace_try_flip_a1);
         for_each_cpu_mask(cpu, rcu_cpu_online_map)
-                if (per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
+                if (rcu_try_flip_waitack_needed(cpu) &&
+                    per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
                         RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1);
                         return 0;
                 }
@@ -509,8 +722,10 @@ rcu_try_flip_waitzero(void)
         smp_mb();  /*  ^^^^^^^^^^^^ */
 
         /* Call for a memory barrier from each CPU. */
-        for_each_cpu_mask(cpu, rcu_cpu_online_map)
+        for_each_cpu_mask(cpu, rcu_cpu_online_map) {
                 per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed;
+                dyntick_save_progress_counter(cpu);
+        }
 
         RCU_TRACE_ME(rcupreempt_trace_try_flip_z2);
         return 1;
@@ -528,7 +743,8 @@ rcu_try_flip_waitmb(void)
 
         RCU_TRACE_ME(rcupreempt_trace_try_flip_m1);
         for_each_cpu_mask(cpu, rcu_cpu_online_map)
-                if (per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
+                if (rcu_try_flip_waitmb_needed(cpu) &&
+                    per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
                         RCU_TRACE_ME(rcupreempt_trace_try_flip_me1);
                         return 0;
                 }
@@ -702,8 +918,9 @@ void rcu_offline_cpu(int cpu)
          * fix.
          */
 
+        local_irq_save(flags);
         rdp = RCU_DATA_ME();
-        spin_lock_irqsave(&rdp->lock, flags);
+        spin_lock(&rdp->lock);
         *rdp->nexttail = list;
         if (list)
                 rdp->nexttail = tail;
@@ -735,9 +952,11 @@ static void rcu_process_callbacks(struct softirq_action *unused)
 {
         unsigned long flags;
         struct rcu_head *next, *list;
-        struct rcu_data *rdp = RCU_DATA_ME();
+        struct rcu_data *rdp;
 
-        spin_lock_irqsave(&rdp->lock, flags);
+        local_irq_save(flags);
+        rdp = RCU_DATA_ME();
+        spin_lock(&rdp->lock);
         list = rdp->donelist;
         if (list == NULL) {
                 spin_unlock_irqrestore(&rdp->lock, flags);
diff --git a/kernel/sched.c b/kernel/sched.c
index b387a8de26a5..f06950c8a6ce 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -668,6 +668,8 @@ const_debug unsigned int sysctl_sched_nr_migrate = 32;
  */
 unsigned int sysctl_sched_rt_period = 1000000;
 
+static __read_mostly int scheduler_running;
+
 /*
  * part of the period that we allow rt tasks to run in us.
  * default: 0.95s
@@ -689,14 +691,16 @@ unsigned long long cpu_clock(int cpu)
         unsigned long flags;
         struct rq *rq;
 
-        local_irq_save(flags);
-        rq = cpu_rq(cpu);
         /*
          * Only call sched_clock() if the scheduler has already been
          * initialized (some code might call cpu_clock() very early):
          */
-        if (rq->idle)
-                update_rq_clock(rq);
+        if (unlikely(!scheduler_running))
+                return 0;
+
+        local_irq_save(flags);
+        rq = cpu_rq(cpu);
+        update_rq_clock(rq);
         now = rq->clock;
         local_irq_restore(flags);
 
@@ -3885,7 +3889,7 @@ pick_next_task(struct rq *rq, struct task_struct *prev)
 asmlinkage void __sched schedule(void)
 {
         struct task_struct *prev, *next;
-        long *switch_count;
+        unsigned long *switch_count;
         struct rq *rq;
         int cpu;
 
@@ -7284,6 +7288,8 @@ void __init sched_init(void)
          * During early bootup we pretend to be a normal task:
          */
         current->sched_class = &fair_sched_class;
+
+        scheduler_running = 1;
 }
 
 #ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 6c091d6e159d..c8e6492c5925 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -202,17 +202,12 @@ static struct sched_entity *__pick_next_entity(struct cfs_rq *cfs_rq)
 
 static inline struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq)
 {
-        struct rb_node **link = &cfs_rq->tasks_timeline.rb_node;
-        struct sched_entity *se = NULL;
-        struct rb_node *parent;
+        struct rb_node *last = rb_last(&cfs_rq->tasks_timeline);
 
-        while (*link) {
-                parent = *link;
-                se = rb_entry(parent, struct sched_entity, run_node);
-                link = &parent->rb_right;
-        }
+        if (!last)
+                return NULL;
 
-        return se;
+        return rb_entry(last, struct sched_entity, run_node);
 }
 
 /**************************************************************
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 5b3aea5f471e..31e9f2a47928 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -313,6 +313,7 @@ void irq_exit(void)
         /* Make sure that timer wheel updates are propagated */
         if (!in_interrupt() && idle_cpu(smp_processor_id()) && !need_resched())
                 tick_nohz_stop_sched_tick();
+        rcu_irq_exit();
 #endif
         preempt_enable_no_resched();
 }
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 7c2da88db4ed..01b6522fd92b 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -216,26 +216,27 @@ static int watchdog(void *__bind_cpu)
         /* initialize timestamp */
         touch_softlockup_watchdog();
 
+        set_current_state(TASK_INTERRUPTIBLE);
         /*
          * Run briefly once per second to reset the softlockup timestamp.
          * If this gets delayed for more than 60 seconds then the
          * debug-printout triggers in softlockup_tick().
          */
         while (!kthread_should_stop()) {
-                set_current_state(TASK_INTERRUPTIBLE);
                 touch_softlockup_watchdog();
                 schedule();
 
                 if (kthread_should_stop())
                         break;
 
-                if (this_cpu != check_cpu)
-                        continue;
-
-                if (sysctl_hung_task_timeout_secs)
-                        check_hung_uninterruptible_tasks(this_cpu);
+                if (this_cpu == check_cpu) {
+                        if (sysctl_hung_task_timeout_secs)
+                                check_hung_uninterruptible_tasks(this_cpu);
+                }
 
+                set_current_state(TASK_INTERRUPTIBLE);
         }
+        __set_current_state(TASK_RUNNING);
 
         return 0;
 }
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index fa9bb73dbdb4..2968298f8f36 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -282,6 +282,7 @@ void tick_nohz_stop_sched_tick(void)
                         ts->idle_tick = ts->sched_timer.expires;
                         ts->tick_stopped = 1;
                         ts->idle_jiffies = last_jiffies;
+                        rcu_enter_nohz();
                 }
 
                 /*
@@ -375,6 +376,8 @@ void tick_nohz_restart_sched_tick(void)
                 return;
         }
 
+        rcu_exit_nohz();
+
         /* Update jiffies first */
         select_nohz_load_balancer(0);
         now = ktime_get();
diff --git a/mm/truncate.c b/mm/truncate.c
index c35c49e54fb6..7d20ce41ecf5 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -134,8 +134,7 @@ invalidate_complete_page(struct address_space *mapping, struct page *page)
 }
 
 /**
- * truncate_inode_pages - truncate range of pages specified by start and
- * end byte offsets
+ * truncate_inode_pages - truncate range of pages specified by start & end byte offsets
  * @mapping: mapping to truncate
  * @lstart: offset from which to truncate
  * @lend: offset to which to truncate
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index a0ec47925597..146cfb0e9882 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -161,11 +161,10 @@ int __init vlan_proc_init(void)
         if (!proc_vlan_dir)
                 goto err;
 
-        proc_vlan_conf = create_proc_entry(name_conf, S_IFREG|S_IRUSR|S_IWUSR,
-                                           proc_vlan_dir);
+        proc_vlan_conf = proc_create(name_conf, S_IFREG|S_IRUSR|S_IWUSR,
+                                     proc_vlan_dir, &vlan_fops);
         if (!proc_vlan_conf)
                 goto err;
-        proc_vlan_conf->proc_fops = &vlan_fops;
         return 0;
 
 err:
@@ -182,13 +181,11 @@ int vlan_proc_add_dev(struct net_device *vlandev)
 {
         struct vlan_dev_info *dev_info = vlan_dev_info(vlandev);
 
-        dev_info->dent = create_proc_entry(vlandev->name,
-                                           S_IFREG|S_IRUSR|S_IWUSR,
-                                           proc_vlan_dir);
+        dev_info->dent = proc_create(vlandev->name, S_IFREG|S_IRUSR|S_IWUSR,
+                                     proc_vlan_dir, &vlandev_fops);
         if (!dev_info->dent)
                 return -ENOBUFS;
 
-        dev_info->dent->proc_fops = &vlandev_fops;
         dev_info->dent->data = vlandev;
         return 0;
 }
diff --git a/net/appletalk/atalk_proc.c b/net/appletalk/atalk_proc.c
index 8e8dcfd532db..162199a2d74f 100644
--- a/net/appletalk/atalk_proc.c
+++ b/net/appletalk/atalk_proc.c
@@ -283,25 +283,24 @@ int __init atalk_proc_init(void)
                 goto out;
         atalk_proc_dir->owner = THIS_MODULE;
 
-        p = create_proc_entry("interface", S_IRUGO, atalk_proc_dir);
+        p = proc_create("interface", S_IRUGO, atalk_proc_dir,
+                        &atalk_seq_interface_fops);
         if (!p)
                 goto out_interface;
-        p->proc_fops = &atalk_seq_interface_fops;
 
-        p = create_proc_entry("route", S_IRUGO, atalk_proc_dir);
+        p = proc_create("route", S_IRUGO, atalk_proc_dir,
+                        &atalk_seq_route_fops);
         if (!p)
                 goto out_route;
-        p->proc_fops = &atalk_seq_route_fops;
 
-        p = create_proc_entry("socket", S_IRUGO, atalk_proc_dir);
+        p = proc_create("socket", S_IRUGO, atalk_proc_dir,
+                        &atalk_seq_socket_fops);
         if (!p)
                 goto out_socket;
-        p->proc_fops = &atalk_seq_socket_fops;
 
-        p = create_proc_entry("arp", S_IRUGO, atalk_proc_dir);
+        p = proc_create("arp", S_IRUGO, atalk_proc_dir, &atalk_seq_arp_fops);
         if (!p)
                 goto out_arp;
-        p->proc_fops = &atalk_seq_arp_fops;
 
         rc = 0;
 out:
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index 574d9a964176..1b228065e745 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -742,9 +742,9 @@ static int __init br2684_init(void)
 {
 #ifdef CONFIG_PROC_FS
         struct proc_dir_entry *p;
-        if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL)
+        p = proc_create("br2684", 0, atm_proc_root, &br2684_proc_ops);
+        if (p == NULL)
                 return -ENOMEM;
-        p->proc_fops = &br2684_proc_ops;
 #endif
         register_atm_ioctl(&br2684_ioctl_ops);
         return 0;
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 86b885ec1cbd..d30167c0b48e 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -962,9 +962,7 @@ static int __init atm_clip_init(void)
         {
                 struct proc_dir_entry *p;
 
-                p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
-                if (p)
-                        p->proc_fops = &arp_seq_fops;
+                p = proc_create("arp", S_IRUGO, atm_proc_root, &arp_seq_fops);
         }
 #endif
 
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 1a8c4c6c0cd0..0e450d12f035 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -1249,9 +1249,7 @@ static int __init lane_module_init(void)
 #ifdef CONFIG_PROC_FS
         struct proc_dir_entry *p;
 
-        p = create_proc_entry("lec", S_IRUGO, atm_proc_root);
-        if (p)
-                p->proc_fops = &lec_seq_fops;
+        p = proc_create("lec", S_IRUGO, atm_proc_root, &lec_seq_fops);
 #endif
 
         register_atm_ioctl(&lane_ioctl_ops);
diff --git a/net/atm/mpoa_proc.c b/net/atm/mpoa_proc.c
index 91f3ffc90dbd..4990541ef5da 100644
--- a/net/atm/mpoa_proc.c
+++ b/net/atm/mpoa_proc.c
@@ -276,12 +276,11 @@ int mpc_proc_init(void)
 {
         struct proc_dir_entry *p;
 
-        p = create_proc_entry(STAT_FILE_NAME, 0, atm_proc_root);
+        p = proc_create(STAT_FILE_NAME, 0, atm_proc_root, &mpc_file_operations);
         if (!p) {
                 printk(KERN_ERR "Unable to initialize /proc/atm/%s\n", STAT_FILE_NAME);
                 return -ENOMEM;
         }
-        p->proc_fops = &mpc_file_operations;
         p->owner = THIS_MODULE;
         return 0;
 }
diff --git a/net/atm/proc.c b/net/atm/proc.c
index 49125110bb8b..e9693aed7ef8 100644
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
@@ -435,11 +435,11 @@ int atm_proc_dev_register(struct atm_dev *dev)
                 goto err_out;
         sprintf(dev->proc_name,"%s:%d",dev->type, dev->number);
 
-        dev->proc_entry = create_proc_entry(dev->proc_name, 0, atm_proc_root);
+        dev->proc_entry = proc_create(dev->proc_name, 0, atm_proc_root,
+                                      &proc_atm_dev_ops);
         if (!dev->proc_entry)
                 goto err_free_name;
         dev->proc_entry->data = dev;
-        dev->proc_entry->proc_fops = &proc_atm_dev_ops;
         dev->proc_entry->owner = THIS_MODULE;
         return 0;
 err_free_name:
@@ -492,10 +492,10 @@ int __init atm_proc_init(void)
         for (e = atm_proc_ents; e->name; e++) {
                 struct proc_dir_entry *dirent;
 
-                dirent = create_proc_entry(e->name, S_IRUGO, atm_proc_root);
+                dirent = proc_create(e->name, S_IRUGO,
+                                     atm_proc_root, e->proc_fops);
                 if (!dirent)
                         goto err_out_remove;
-                dirent->proc_fops = e->proc_fops;
                 dirent->owner = THIS_MODULE;
                 e->dirent = dirent;
         }
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index a8811c0a0cea..7c5459c8e8ef 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -417,6 +417,8 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err)
                 l2cap_sock_kill(sk);
         }
 
+        del_timer_sync(&conn->info_timer);
+
         hcon->l2cap_data = NULL;
         kfree(conn);
 }
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 2328acbd16cd..aef01533dfb6 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1389,10 +1389,10 @@ void neigh_table_init_no_netlink(struct neigh_table *tbl)
                 panic("cannot create neighbour cache statistics");
 
 #ifdef CONFIG_PROC_FS
-        tbl->pde = create_proc_entry(tbl->id, 0, init_net.proc_net_stat);
+        tbl->pde = proc_create(tbl->id, 0, init_net.proc_net_stat,
+                               &neigh_stat_seq_fops);
         if (!tbl->pde)
                 panic("cannot create neighbour proc dir entry");
-        tbl->pde->proc_fops = &neigh_stat_seq_fops;
         tbl->pde->data = tbl;
 #endif
 
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index bfcdfaebca5c..20e63b302ba6 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3570,14 +3570,14 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname)
         if (err)
                 goto out1;
 
-        pkt_dev->entry = create_proc_entry(ifname, 0600, pg_proc_dir);
+        pkt_dev->entry = proc_create(ifname, 0600,
+                                     pg_proc_dir, &pktgen_if_fops);
         if (!pkt_dev->entry) {
                 printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n",
                        PG_PROC_DIR, ifname);
                 err = -EINVAL;
                 goto out2;
         }
-        pkt_dev->entry->proc_fops = &pktgen_if_fops;
         pkt_dev->entry->data = pkt_dev;
 #ifdef CONFIG_XFRM
         pkt_dev->ipsmode = XFRM_MODE_TRANSPORT;
@@ -3628,7 +3628,7 @@ static int __init pktgen_create_thread(int cpu)
         kthread_bind(p, cpu);
         t->tsk = p;
 
-        pe = create_proc_entry(t->tsk->comm, 0600, pg_proc_dir);
+        pe = proc_create(t->tsk->comm, 0600, pg_proc_dir, &pktgen_thread_fops);
         if (!pe) {
                 printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n",
                        PG_PROC_DIR, t->tsk->comm);
@@ -3638,7 +3638,6 @@ static int __init pktgen_create_thread(int cpu)
                 return -EINVAL;
         }
 
-        pe->proc_fops = &pktgen_thread_fops;
         pe->data = t;
 
         wake_up_process(p);
@@ -3709,7 +3708,7 @@ static int __init pg_init(void)
                 return -ENODEV;
         pg_proc_dir->owner = THIS_MODULE;
 
-        pe = create_proc_entry(PGCTRL, 0600, pg_proc_dir);
+        pe = proc_create(PGCTRL, 0600, pg_proc_dir, &pktgen_fops);
         if (pe == NULL) {
                 printk(KERN_ERR "pktgen: ERROR: cannot create %s "
                        "procfs entry.\n", PGCTRL);
@@ -3717,7 +3716,6 @@ static int __init pg_init(void)
                 return -EINVAL;
         }
 
-        pe->proc_fops = &pktgen_fops;
         pe->data = NULL;
 
         /* Register us to receive netdevice events */
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index f282b26f63eb..87490f7bb0f7 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -752,6 +752,7 @@ int devinet_ioctl(unsigned int cmd, void __user *arg)
                         inet_del_ifa(in_dev, ifap, 0);
                         ifa->ifa_broadcast = 0;
                         ifa->ifa_anycast = 0;
+                        ifa->ifa_scope = 0;
                 }
 
                 ifa->ifa_address = ifa->ifa_local = sin->sin_addr.s_addr;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 906cb1ada4c3..e7821ba7a9a0 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -266,20 +266,24 @@ static struct ip_tunnel * ipgre_tunnel_locate(struct ip_tunnel_parm *parms, int
         if (!dev)
           return NULL;
 
+        if (strchr(name, '%')) {
+                if (dev_alloc_name(dev, name) < 0)
+                        goto failed_free;
+        }
+
         dev->init = ipgre_tunnel_init;
         nt = netdev_priv(dev);
         nt->parms = *parms;
 
-        if (register_netdevice(dev) < 0) {
-                free_netdev(dev);
-                goto failed;
-        }
+        if (register_netdevice(dev) < 0)
+                goto failed_free;
 
         dev_hold(dev);
         ipgre_tunnel_link(nt);
         return nt;
 
-failed:
+failed_free:
+        free_netdev(dev);
         return NULL;
 }
 
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index ae1f45fc23b9..58b60b2fb011 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -108,8 +108,11 @@ static int ipcomp_compress(struct xfrm_state *x, struct sk_buff *skb)
         const int cpu = get_cpu();
         u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
         struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-        int err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+        int err;
 
+        local_bh_disable();
+        err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+        local_bh_enable();
         if (err)
                 goto out;
 
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index e77e3b855834..dbaed69de06a 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -228,20 +228,24 @@ static struct ip_tunnel * ipip_tunnel_locate(struct ip_tunnel_parm *parms, int c
         if (dev == NULL)
                 return NULL;
 
+        if (strchr(name, '%')) {
+                if (dev_alloc_name(dev, name) < 0)
+                        goto failed_free;
+        }
+
         nt = netdev_priv(dev);
         dev->init = ipip_tunnel_init;
         nt->parms = *parms;
 
-        if (register_netdevice(dev) < 0) {
-                free_netdev(dev);
-                goto failed;
-        }
+        if (register_netdevice(dev) < 0)
+                goto failed_free;
 
         dev_hold(dev);
         ipip_tunnel_link(nt);
         return nt;
 
-failed:
+failed_free:
+        free_netdev(dev);
         return NULL;
 }
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 525787b52b72..7b5e8e1d94be 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -542,12 +542,11 @@ static __init int ip_rt_proc_init(struct net *net)
         if (!pde)
                 goto err1;
 
-        pde = create_proc_entry("rt_cache", S_IRUGO, net->proc_net_stat);
+        pde = proc_create("rt_cache", S_IRUGO,
+                          net->proc_net_stat, &rt_cpu_seq_fops);
         if (!pde)
                 goto err2;
 
-        pde->proc_fops = &rt_cpu_seq_fops;
-
 #ifdef CONFIG_NET_CLS_ROUTE
         pde = create_proc_read_entry("rt_acct", 0, net->proc_net,
                         ip_rt_acct_read, NULL);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e40213db9e4c..101e0e70ba27 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1557,6 +1557,7 @@ addrconf_prefix_route(struct in6_addr *pfx, int plen, struct net_device *dev,
                 .fc_expires = expires,
                 .fc_dst_len = plen,
                 .fc_flags = RTF_UP | flags,
+                .fc_nlinfo.nl_net = &init_net,
         };
 
         ipv6_addr_copy(&cfg.fc_dst, pfx);
@@ -1583,6 +1584,7 @@ static void addrconf_add_mroute(struct net_device *dev)
                 .fc_ifindex = dev->ifindex,
                 .fc_dst_len = 8,
                 .fc_flags = RTF_UP,
+                .fc_nlinfo.nl_net = &init_net,
         };
 
         ipv6_addr_set(&cfg.fc_dst, htonl(0xFF000000), 0, 0, 0);
@@ -1599,6 +1601,7 @@ static void sit_route_add(struct net_device *dev)
                 .fc_ifindex = dev->ifindex,
                 .fc_dst_len = 96,
                 .fc_flags = RTF_UP | RTF_NONEXTHOP,
+                .fc_nlinfo.nl_net = &init_net,
         };
 
         /* prefix length - 96 bits "::d.d.d.d" */
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 2a124e9a1b2d..78f438880923 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -238,17 +238,24 @@ static struct ip6_tnl *ip6_tnl_create(struct ip6_tnl_parm *p)
         if (dev == NULL)
                 goto failed;
 
+        if (strchr(name, '%')) {
+                if (dev_alloc_name(dev, name) < 0)
+                        goto failed_free;
+        }
+
         t = netdev_priv(dev);
         dev->init = ip6_tnl_dev_init;
         t->parms = *p;
 
-        if ((err = register_netdevice(dev)) < 0) {
-                free_netdev(dev);
-                goto failed;
-        }
+        if ((err = register_netdevice(dev)) < 0)
+                goto failed_free;
+
         dev_hold(dev);
         ip6_tnl_link(t);
         return t;
+
+failed_free:
+        free_netdev(dev);
 failed:
         return NULL;
 }
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index b90039593a7f..e3dcfa2f436b 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -146,7 +146,9 @@ static int ipcomp6_output(struct xfrm_state *x, struct sk_buff *skb)
         scratch = *per_cpu_ptr(ipcomp6_scratches, cpu);
         tfm = *per_cpu_ptr(ipcd->tfms, cpu);
 
+        local_bh_disable();
         err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+        local_bh_enable();
         if (err || (dlen + sizeof(*ipch)) >= plen) {
                 put_cpu();
                 goto out_ok;
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 35e502a72495..199ef379e501 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -217,12 +217,12 @@ int snmp6_register_dev(struct inet6_dev *idev)
         if (!proc_net_devsnmp6)
                 return -ENOENT;
 
-        p = create_proc_entry(idev->dev->name, S_IRUGO, proc_net_devsnmp6);
+        p = proc_create(idev->dev->name, S_IRUGO,
+                        proc_net_devsnmp6, &snmp6_seq_fops);
         if (!p)
                 return -ENOMEM;
 
         p->data = idev;
-        p->proc_fops = &snmp6_seq_fops;
 
         idev->stats.proc_dir_entry = p;
         return 0;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 6e7b56ef4449..e8b241cb60bc 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1719,6 +1719,8 @@ static void rtmsg_to_fib6_config(struct in6_rtmsg *rtmsg,
         cfg->fc_src_len = rtmsg->rtmsg_src_len;
         cfg->fc_flags = rtmsg->rtmsg_flags;
 
+        cfg->fc_nlinfo.nl_net = &init_net;
+
         ipv6_addr_copy(&cfg->fc_dst, &rtmsg->rtmsg_dst);
         ipv6_addr_copy(&cfg->fc_src, &rtmsg->rtmsg_src);
         ipv6_addr_copy(&cfg->fc_gateway, &rtmsg->rtmsg_gateway);
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index dde7801abeff..1656c003b989 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -171,6 +171,11 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct ip_tunnel_parm *parms, int
         if (dev == NULL)
                 return NULL;
 
+        if (strchr(name, '%')) {
+                if (dev_alloc_name(dev, name) < 0)
+                        goto failed_free;
+        }
+
         nt = netdev_priv(dev);
         dev->init = ipip6_tunnel_init;
         nt->parms = *parms;
@@ -178,16 +183,16 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct ip_tunnel_parm *parms, int
         if (parms->i_flags & SIT_ISATAP)
                 dev->priv_flags |= IFF_ISATAP;
 
-        if (register_netdevice(dev) < 0) {
-                free_netdev(dev);
-                goto failed;
-        }
+        if (register_netdevice(dev) < 0)
+                goto failed_free;
 
         dev_hold(dev);
 
         ipip6_tunnel_link(nt);
         return nt;
 
+failed_free:
+        free_netdev(dev);
 failed:
         return NULL;
 }
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 408691b777c2..d6d3e68086f8 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -102,9 +102,6 @@ static int ipv6_sysctl_net_init(struct net *net)
         net->ipv6.sysctl.table = register_net_sysctl_table(net, net_ipv6_ctl_path,
                                                            ipv6_table);
         if (!net->ipv6.sysctl.table)
-                return -ENOMEM;
-
-        if (!net->ipv6.sysctl.table)
                 goto out_ipv6_icmp_table;
 
         err = 0;
diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c
index d483a00dc427..5ed97ad0e2e3 100644
--- a/net/ipx/ipx_proc.c
+++ b/net/ipx/ipx_proc.c
@@ -358,22 +358,19 @@ int __init ipx_proc_init(void)
 
         if (!ipx_proc_dir)
                 goto out;
-        p = create_proc_entry("interface", S_IRUGO, ipx_proc_dir);
+        p = proc_create("interface", S_IRUGO,
+                        ipx_proc_dir, &ipx_seq_interface_fops);
         if (!p)
                 goto out_interface;
 
-        p->proc_fops = &ipx_seq_interface_fops;
-        p = create_proc_entry("route", S_IRUGO, ipx_proc_dir);
+        p = proc_create("route", S_IRUGO, ipx_proc_dir, &ipx_seq_route_fops);
         if (!p)
                 goto out_route;
 
-        p->proc_fops = &ipx_seq_route_fops;
-        p = create_proc_entry("socket", S_IRUGO, ipx_proc_dir);
+        p = proc_create("socket", S_IRUGO, ipx_proc_dir, &ipx_seq_socket_fops);
         if (!p)
                 goto out_socket;
 
-        p->proc_fops = &ipx_seq_socket_fops;
-
         rc = 0;
 out:
         return rc;
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 1c853927810a..8b5f486ac80f 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3807,17 +3807,16 @@ static int pfkey_init_proc(void)
 {
         struct proc_dir_entry *e;
 
-        e = create_proc_entry("pfkey", 0, init_net.proc_net);
+        e = proc_net_fops_create(&init_net, "pfkey", 0, &pfkey_proc_ops);
         if (e == NULL)
                 return -ENOMEM;
 
-        e->proc_fops = &pfkey_proc_ops;
         return 0;
 }
 
 static void pfkey_exit_proc(void)
 {
-        remove_proc_entry("net/pfkey", NULL);
+        proc_net_remove(&init_net, "pfkey");
 }
 #else
 static inline int pfkey_init_proc(void)
diff --git a/net/llc/llc_proc.c b/net/llc/llc_proc.c
index cb34bc0518e8..48212c0a961c 100644
--- a/net/llc/llc_proc.c
+++ b/net/llc/llc_proc.c
@@ -239,18 +239,14 @@ int __init llc_proc_init(void)
                 goto out;
         llc_proc_dir->owner = THIS_MODULE;
 
-        p = create_proc_entry("socket", S_IRUGO, llc_proc_dir);
+        p = proc_create("socket", S_IRUGO, llc_proc_dir, &llc_seq_socket_fops);
         if (!p)
                 goto out_socket;
 
-        p->proc_fops = &llc_seq_socket_fops;
-
-        p = create_proc_entry("core", S_IRUGO, llc_proc_dir);
+        p = proc_create("core", S_IRUGO, llc_proc_dir, &llc_seq_core_fops);
         if (!p)
                 goto out_core;
 
-        p->proc_fops = &llc_seq_core_fops;
-
         rc = 0;
 out:
         return rc;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 2019b4f0528d..9aeed5320228 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -1116,9 +1116,10 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
         /* prepare reordering buffer */
         tid_agg_rx->reorder_buf =
                 kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
-        if ((!tid_agg_rx->reorder_buf) && net_ratelimit()) {
-                printk(KERN_ERR "can not allocate reordering buffer "
-                                                "to tid %d\n", tid);
+        if (!tid_agg_rx->reorder_buf) {
+                if (net_ratelimit())
+                        printk(KERN_ERR "can not allocate reordering buffer "
+                               "to tid %d\n", tid);
                 goto end;
         }
         memset(tid_agg_rx->reorder_buf, 0,
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 327e847d2702..b77eb56a87e3 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -256,13 +256,19 @@ __nf_conntrack_find(const struct nf_conntrack_tuple *tuple)
         struct hlist_node *n;
         unsigned int hash = hash_conntrack(tuple);
 
+        /* Disable BHs the entire time since we normally need to disable them
+         * at least once for the stats anyway.
+         */
+        local_bh_disable();
         hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) {
                 if (nf_ct_tuple_equal(tuple, &h->tuple)) {
                         NF_CT_STAT_INC(found);
+                        local_bh_enable();
                         return h;
                 }
                 NF_CT_STAT_INC(searched);
         }
+        local_bh_enable();
 
         return NULL;
 }
@@ -400,17 +406,20 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple,
         struct hlist_node *n;
         unsigned int hash = hash_conntrack(tuple);
 
-        rcu_read_lock();
+        /* Disable BHs the entire time since we need to disable them at
+         * least once for the stats anyway.
+         */
+        rcu_read_lock_bh();
         hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) {
                 if (nf_ct_tuplehash_to_ctrack(h) != ignored_conntrack &&
                     nf_ct_tuple_equal(tuple, &h->tuple)) {
                         NF_CT_STAT_INC(found);
-                        rcu_read_unlock();
+                        rcu_read_unlock_bh();
                         return 1;
                 }
                 NF_CT_STAT_INC(searched);
         }
-        rcu_read_unlock();
+        rcu_read_unlock_bh();
 
         return 0;
 }
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 85330856a29c..0c50b2894055 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -122,7 +122,7 @@ conntrack_addrcmp(const union nf_inet_addr *kaddr,
                   const union nf_inet_addr *umask, unsigned int l3proto)
 {
         if (l3proto == AF_INET)
-                return (kaddr->ip & umask->ip) == uaddr->ip;
+                return ((kaddr->ip ^ uaddr->ip) & umask->ip) == 0;
         else if (l3proto == AF_INET6)
                 return ipv6_masked_addr_cmp(&kaddr->in6, &umask->in6,
                        &uaddr->in6) == 0;
@@ -231,7 +231,7 @@ conntrack_mt(const struct sk_buff *skb, const struct net_device *in,
                         if (test_bit(IPS_DST_NAT_BIT, &ct->status))
                                 statebit |= XT_CONNTRACK_STATE_DNAT;
                 }
-                if ((info->state_mask & statebit) ^
+                if (!!(info->state_mask & statebit) ^
                     !(info->invert_flags & XT_CONNTRACK_STATE))
                         return false;
         }
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 8bb79f281774..675a5c3e68a6 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -838,11 +838,11 @@ int sctp_auth_set_key(struct sctp_endpoint *ep,
         }
 
         /* Create a new key data based on the info passed in */
-        key = sctp_auth_create_key(auth_key->sca_keylen, GFP_KERNEL);
+        key = sctp_auth_create_key(auth_key->sca_keylength, GFP_KERNEL);
         if (!key)
                 goto nomem;
 
-        memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylen);
+        memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylength);
 
         /* If we are replacing, remove the old keys data from the
          * key id.  If we are adding new key id, add it to the
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 4d7ec961ae1d..87f940587d5f 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -966,7 +966,7 @@ static struct inet6_protocol sctpv6_protocol = {
         .flags        = INET6_PROTO_NOPOLICY | INET6_PROTO_FINAL,
 };
 
-static struct sctp_af sctp_ipv6_specific = {
+static struct sctp_af sctp_af_inet6 = {
         .sa_family         = AF_INET6,
         .sctp_xmit         = sctp_v6_xmit,
         .setsockopt        = ipv6_setsockopt,
@@ -998,7 +998,7 @@ static struct sctp_af sctp_ipv6_specific = {
 #endif
 };
 
-static struct sctp_pf sctp_pf_inet6_specific = {
+static struct sctp_pf sctp_pf_inet6 = {
         .event_msgname = sctp_inet6_event_msgname,
         .skb_msgname   = sctp_inet6_skb_msgname,
         .af_supported  = sctp_inet6_af_supported,
@@ -1008,7 +1008,7 @@ static struct sctp_pf sctp_pf_inet6_specific = {
         .supported_addrs = sctp_inet6_supported_addrs,
         .create_accept_sk = sctp_v6_create_accept_sk,
         .addr_v4map    = sctp_v6_addr_v4map,
-        .af            = &sctp_ipv6_specific,
+        .af            = &sctp_af_inet6,
 };
 
 /* Initialize IPv6 support and register with socket layer.  */
@@ -1017,10 +1017,10 @@ int sctp_v6_init(void)
         int rc;
 
         /* Register the SCTP specific PF_INET6 functions. */
-        sctp_register_pf(&sctp_pf_inet6_specific, PF_INET6);
+        sctp_register_pf(&sctp_pf_inet6, PF_INET6);
 
         /* Register the SCTP specific AF_INET6 functions. */
-        sctp_register_af(&sctp_ipv6_specific);
+        sctp_register_af(&sctp_af_inet6);
 
         rc = proto_register(&sctpv6_prot, 1);
         if (rc)
@@ -1051,7 +1051,7 @@ void sctp_v6_exit(void)
         inet6_unregister_protosw(&sctpv6_seqpacket_protosw);
         inet6_unregister_protosw(&sctpv6_stream_protosw);
         proto_unregister(&sctpv6_prot);
-        list_del(&sctp_ipv6_specific.list);
+        list_del(&sctp_af_inet6.list);
 }
 
 /* Unregister with inet6 layer. */
diff --git a/net/sctp/objcnt.c b/net/sctp/objcnt.c
index 14e294e37626..cfeb07ea1b04 100644
--- a/net/sctp/objcnt.c
+++ b/net/sctp/objcnt.c
@@ -132,12 +132,11 @@ void sctp_dbg_objcnt_init(void)
 {
         struct proc_dir_entry *ent;
 
-        ent = create_proc_entry("sctp_dbg_objcnt", 0, proc_net_sctp);
+        ent = proc_create("sctp_dbg_objcnt", 0,
+                          proc_net_sctp, &sctp_objcnt_ops);
         if (!ent)
                 printk(KERN_WARNING
                         "sctp_dbg_objcnt: Unable to create /proc entry.\n");
-        else
-                ent->proc_fops = &sctp_objcnt_ops;
 }
 
 /* Cleanup the objcount entry in the proc filesystem.  */
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index 69bb5a63fd8b..9e214da82d9e 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -108,12 +108,10 @@ int __init sctp_snmp_proc_init(void)
 {
         struct proc_dir_entry *p;
 
-        p = create_proc_entry("snmp", S_IRUGO, proc_net_sctp);
+        p = proc_create("snmp", S_IRUGO, proc_net_sctp, &sctp_snmp_seq_fops);
         if (!p)
                 return -ENOMEM;
 
-        p->proc_fops = &sctp_snmp_seq_fops;
-
         return 0;
 }
 
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 22a16571499c..688546dccd82 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -832,7 +832,7 @@ static inline int sctp_v4_xmit(struct sk_buff *skb,
         return ip_queue_xmit(skb, ipfragok);
 }
 
-static struct sctp_af sctp_ipv4_specific;
+static struct sctp_af sctp_af_inet;
 
 static struct sctp_pf sctp_pf_inet = {
         .event_msgname = sctp_inet_event_msgname,
@@ -844,7 +844,7 @@ static struct sctp_pf sctp_pf_inet = {
         .supported_addrs = sctp_inet_supported_addrs,
         .create_accept_sk = sctp_v4_create_accept_sk,
         .addr_v4map     = sctp_v4_addr_v4map,
-        .af            = &sctp_ipv4_specific,
+        .af            = &sctp_af_inet
 };
 
 /* Notifier for inetaddr addition/deletion events.  */
@@ -906,7 +906,7 @@ static struct net_protocol sctp_protocol = {
 };
 
 /* IPv4 address related functions.  */
-static struct sctp_af sctp_ipv4_specific = {
+static struct sctp_af sctp_af_inet = {
         .sa_family         = AF_INET,
         .sctp_xmit         = sctp_v4_xmit,
         .setsockopt        = ip_setsockopt,
@@ -1192,7 +1192,7 @@ SCTP_STATIC __init int sctp_init(void)
         sctp_sysctl_register();
 
         INIT_LIST_HEAD(&sctp_address_families);
-        sctp_register_af(&sctp_ipv4_specific);
+        sctp_register_af(&sctp_af_inet);
 
         status = proto_register(&sctp_prot, 1);
         if (status)
@@ -1249,7 +1249,7 @@ err_v6_init:
         proto_unregister(&sctp_prot);
 err_proto_register:
         sctp_sysctl_unregister();
-        list_del(&sctp_ipv4_specific.list);
+        list_del(&sctp_af_inet.list);
         free_pages((unsigned long)sctp_port_hashtable,
                    get_order(sctp_port_hashsize *
                              sizeof(struct sctp_bind_hashbucket)));
@@ -1299,7 +1299,7 @@ SCTP_STATIC __exit void sctp_exit(void)
         inet_unregister_protosw(&sctp_seqpacket_protosw);
 
         sctp_sysctl_unregister();
-        list_del(&sctp_ipv4_specific.list);
+        list_del(&sctp_af_inet.list);
 
         free_pages((unsigned long)sctp_assoc_hashtable,
                    get_order(sctp_assoc_hashsize *
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 44797ad88a05..939892691a26 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1964,7 +1964,7 @@ static int sctp_setsockopt_disable_fragments(struct sock *sk,
 static int sctp_setsockopt_events(struct sock *sk, char __user *optval,
                                         int optlen)
 {
-        if (optlen != sizeof(struct sctp_event_subscribe))
+        if (optlen > sizeof(struct sctp_event_subscribe))
                 return -EINVAL;
         if (copy_from_user(&sctp_sk(sk)->subscribe, optval, optlen))
                 return -EFAULT;
@@ -5070,6 +5070,7 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
         struct sctp_authchunks val;
         struct sctp_association *asoc;
         struct sctp_chunks_param *ch;
+        u32    num_chunks;
         char __user *to;
 
         if (len <= sizeof(struct sctp_authchunks))
@@ -5086,12 +5087,15 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
         ch = asoc->peer.peer_chunks;
 
         /* See if the user provided enough room for all the data */
-        if (len < ntohs(ch->param_hdr.length))
+        num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
+        if (len < num_chunks)
                 return -EINVAL;
 
-        len = ntohs(ch->param_hdr.length);
+        len = num_chunks;
         if (put_user(len, optlen))
                 return -EFAULT;
+        if (put_user(num_chunks, &p->gauth_number_of_chunks))
+                return -EFAULT;
         if (copy_to_user(to, ch->chunks, len))
                 return -EFAULT;
 
@@ -5105,6 +5109,7 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
         struct sctp_authchunks val;
         struct sctp_association *asoc;
         struct sctp_chunks_param *ch;
+        u32    num_chunks;
         char __user *to;
 
         if (len <= sizeof(struct sctp_authchunks))
@@ -5123,12 +5128,15 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
         else
                 ch = sctp_sk(sk)->ep->auth_chunk_list;
 
-        if (len < ntohs(ch->param_hdr.length))
+        num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
+        if (len < num_chunks)
                 return -EINVAL;
 
-        len = ntohs(ch->param_hdr.length);
+        len = num_chunks;
         if (put_user(len, optlen))
                 return -EFAULT;
+        if (put_user(num_chunks, &p->gauth_number_of_chunks))
+                return -EFAULT;
         if (copy_to_user(to, ch->chunks, len))
                 return -EFAULT;
 
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index e27b11f18b7f..b43f1f110f87 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -206,7 +206,7 @@ struct sctp_ulpevent  *sctp_ulpevent_make_assoc_change(
          * This field is the total length of the notification data, including
          * the notification header.
          */
-        sac->sac_length = sizeof(struct sctp_assoc_change);
+        sac->sac_length = skb->len;
 
         /* Socket Extensions for SCTP
          * 5.3.1.1 SCTP_ASSOC_CHANGE
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 636c8e04e0be..b5f2786251b9 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -316,31 +316,29 @@ static int create_cache_proc_entries(struct cache_detail *cd)
         cd->proc_ent->owner = cd->owner;
         cd->channel_ent = cd->content_ent = NULL;
 
-        p = create_proc_entry("flush", S_IFREG|S_IRUSR|S_IWUSR, cd->proc_ent);
+        p = proc_create("flush", S_IFREG|S_IRUSR|S_IWUSR,
+                        cd->proc_ent, &cache_flush_operations);
         cd->flush_ent = p;
         if (p == NULL)
                 goto out_nomem;
-        p->proc_fops = &cache_flush_operations;
         p->owner = cd->owner;
         p->data = cd;
 
         if (cd->cache_request || cd->cache_parse) {
-                p = create_proc_entry("channel", S_IFREG|S_IRUSR|S_IWUSR,
-                                      cd->proc_ent);
+                p = proc_create("channel", S_IFREG|S_IRUSR|S_IWUSR,
+                                cd->proc_ent, &cache_file_operations);
                 cd->channel_ent = p;
                 if (p == NULL)
                         goto out_nomem;
-                p->proc_fops = &cache_file_operations;
                 p->owner = cd->owner;
                 p->data = cd;
         }
         if (cd->cache_show) {
-                p = create_proc_entry("content", S_IFREG|S_IRUSR|S_IWUSR,
-                                      cd->proc_ent);
+                p = proc_create("content", S_IFREG|S_IRUSR|S_IWUSR,
+                                cd->proc_ent, &content_file_operations);
                 cd->content_ent = p;
                 if (p == NULL)
                         goto out_nomem;
-                p->proc_fops = &content_file_operations;
                 p->owner = cd->owner;
                 p->data = cd;
         }
diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c
index 5a16875f5ac8..c6061a4346c8 100644
--- a/net/sunrpc/stats.c
+++ b/net/sunrpc/stats.c
@@ -229,9 +229,8 @@ do_register(const char *name, void *data, const struct file_operations *fops)
         rpc_proc_init();
         dprintk("RPC:       registering /proc/net/rpc/%s\n", name);
 
-        ent = create_proc_entry(name, 0, proc_net_rpc);
+        ent = proc_create(name, 0, proc_net_rpc, fops);
         if (ent) {
-                ent->proc_fops = fops;
                 ent->data = data;
         }
         return ent;
diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c
index 95b373913aa0..4bb3404f610b 100644
--- a/net/tipc/cluster.c
+++ b/net/tipc/cluster.c
@@ -142,7 +142,7 @@ void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr)
                 max_n_num = tipc_highest_allowed_slave;
         assert(n_num > 0);
         assert(n_num <= max_n_num);
-        assert(c_ptr->nodes[n_num] == 0);
+        assert(c_ptr->nodes[n_num] == NULL);
         c_ptr->nodes[n_num] = n_ptr;
         if (n_num > c_ptr->highest_node)
                 c_ptr->highest_node = n_num;
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 1b17fecee747..cefa99824c58 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -3251,7 +3251,7 @@ static void link_print(struct link *l_ptr, struct print_buf *buf,
                 if ((mod(msg_seqno(buf_msg(l_ptr->last_out)) -
                          msg_seqno(buf_msg(l_ptr->first_out)))
                      != (l_ptr->out_queue_size - 1))
-                    || (l_ptr->last_out->next != 0)) {
+                    || (l_ptr->last_out->next != NULL)) {
                         tipc_printf(buf, "\nSend queue inconsistency\n");
                         tipc_printf(buf, "first_out= %x ", l_ptr->first_out);
                         tipc_printf(buf, "next_out= %x ", l_ptr->next_out);
diff --git a/net/tipc/ref.c b/net/tipc/ref.c
index 6704a58c7851..c38744c96ed1 100644
--- a/net/tipc/ref.c
+++ b/net/tipc/ref.c
@@ -148,7 +148,7 @@ u32 tipc_ref_acquire(void *object, spinlock_t **lock)
                 reference = (next_plus_upper & ~index_mask) + index;
                 entry->data.reference = reference;
                 entry->object = object;
-                if (lock != 0)
+                if (lock != NULL)
                         *lock = &entry->lock;
                 spin_unlock_bh(&entry->lock);
         }
diff --git a/net/tipc/zone.c b/net/tipc/zone.c
index 114e173f11a5..3506f8563441 100644
--- a/net/tipc/zone.c
+++ b/net/tipc/zone.c
@@ -82,7 +82,7 @@ void tipc_zone_attach_cluster(struct _zone *z_ptr, struct cluster *c_ptr)
 
         assert(c_ptr->addr);
         assert(c_num <= tipc_max_clusters);
-        assert(z_ptr->clusters[c_num] == 0);
+        assert(z_ptr->clusters[c_num] == NULL);
         z_ptr->clusters[c_num] = c_ptr;
 }
 
diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c
index f2e54c3f064e..5bebe40bf4e6 100644
--- a/net/wanrouter/wanproc.c
+++ b/net/wanrouter/wanproc.c
@@ -292,14 +292,12 @@ int __init wanrouter_proc_init(void)
         if (!proc_router)
                 goto fail;
 
-        p = create_proc_entry("config", S_IRUGO, proc_router);
+        p = proc_create("config", S_IRUGO, proc_router, &config_fops);
         if (!p)
                 goto fail_config;
-        p->proc_fops = &config_fops;
-        p = create_proc_entry("status", S_IRUGO, proc_router);
+        p = proc_create("status", S_IRUGO, proc_router, &status_fops);
         if (!p)
                 goto fail_stat;
-        p->proc_fops = &status_fops;
         return 0;
 fail_stat:
         remove_proc_entry("config", proc_router);
@@ -329,10 +327,10 @@ int wanrouter_proc_add(struct wan_device* wandev)
         if (wandev->magic != ROUTER_MAGIC)
                 return -EINVAL;
 
-        wandev->dent = create_proc_entry(wandev->name, S_IRUGO, proc_router);
+        wandev->dent = proc_create(wandev->name, S_IRUGO,
+                                   proc_router, &wandev_fops);
         if (!wandev->dent)
                 return -ENOMEM;
-        wandev->dent->proc_fops = &wandev_fops;
         wandev->dent->data      = wandev;
         return 0;
 }
diff --git a/net/x25/x25_proc.c b/net/x25/x25_proc.c
index 3f52b09bed03..1afa44d25beb 100644
--- a/net/x25/x25_proc.c
+++ b/net/x25/x25_proc.c
@@ -312,20 +312,18 @@ int __init x25_proc_init(void)
         if (!x25_proc_dir)
                 goto out;
 
-        p = create_proc_entry("route", S_IRUGO, x25_proc_dir);
+        p = proc_create("route", S_IRUGO, x25_proc_dir, &x25_seq_route_fops);
         if (!p)
                 goto out_route;
-        p->proc_fops = &x25_seq_route_fops;
 
-        p = create_proc_entry("socket", S_IRUGO, x25_proc_dir);
+        p = proc_create("socket", S_IRUGO, x25_proc_dir, &x25_seq_socket_fops);
         if (!p)
                 goto out_socket;
-        p->proc_fops = &x25_seq_socket_fops;
 
-        p = create_proc_entry("forward", S_IRUGO, x25_proc_dir);
+        p = proc_create("forward", S_IRUGO, x25_proc_dir,
+                        &x25_seq_forward_fops);
         if (!p)
                 goto out_forward;
-        p->proc_fops = &x25_seq_forward_fops;
         rc = 0;
 
 out:
diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c
index 6304c3a89ba0..fe03bb820532 100644
--- a/sound/isa/sb/sb8_main.c
+++ b/sound/isa/sb/sb8_main.c
@@ -277,7 +277,7 @@ static int snd_sb8_capture_prepare(struct snd_pcm_substream *substream)
         } else {
                 snd_sbdsp_command(chip, 256 - runtime->rate_den);
         }
-        if (chip->capture_format != SB_DSP_OUTPUT) {
+        if (chip->capture_format != SB_DSP_INPUT) {
                 count--;
                 snd_sbdsp_command(chip, SB_DSP_BLOCK_SIZE);
                 snd_sbdsp_command(chip, count & 0xff);
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 19f08846d6fc..c8649282c2cf 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -1778,9 +1778,9 @@ static hda_nid_t ad1988_capsrc_nids[3] = {
 static struct hda_input_mux ad1988_6stack_capture_source = {
         .num_items = 5,
         .items = {
-                { "Front Mic", 0x0 },
-                { "Line", 0x1 },
-                { "Mic", 0x4 },
+                { "Front Mic", 0x1 },   /* port-B */
+                { "Line", 0x2 },        /* port-C */
+                { "Mic", 0x4 },         /* port-E */
                 { "CD", 0x5 },
                 { "Mix", 0x9 },
         },
@@ -1789,7 +1789,7 @@ static struct hda_input_mux ad1988_6stack_capture_source = {
 static struct hda_input_mux ad1988_laptop_capture_source = {
         .num_items = 3,
         .items = {
-                { "Mic/Line", 0x0 },
+                { "Mic/Line", 0x1 },    /* port-B */
                 { "CD", 0x5 },
                 { "Mix", 0x9 },
         },
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index f7cd3a804b11..7206b30cbf94 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1230,6 +1230,11 @@ static struct hda_verb cxt5047_toshiba_init_verbs[] = {
 static struct hda_verb cxt5047_hp_init_verbs[] = {
         /* pin sensing on HP jack */
         {0x13, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+        /* 0x13 is actually shared by both HP and speaker;
+         * setting the connection to 0 (=0x19) makes the master volume control
+         * working mysteriouslly...
+         */
+        {0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
         /* Record selector: Ext Mic */
         {0x12, AC_VERB_SET_CONNECT_SEL,0x03},
         {0x19, AC_VERB_SET_AMP_GAIN_MUTE,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 777f8c01ca7a..33282f9c01c7 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3973,8 +3973,8 @@ static struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
         ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
         HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
         HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
-        HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
-        HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT),
+        HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+        HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
         { } /* end */
 };
 
@@ -4005,9 +4005,9 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = {
         HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
         HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
         ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
-        HDA_CODEC_VOLUME_MONO("Mono Speaker Playback Volume", 0x0a, 1, 0x0,
+        HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
                               HDA_OUTPUT),
-        HDA_BIND_MUTE_MONO("Mono Speaker Playback Switch", 0x0a, 1, 2,
+        HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
                            HDA_INPUT),
         HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
         HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
@@ -7639,6 +7639,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
         SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
         SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
         SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+        SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
         SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
         SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
         {}
@@ -8102,7 +8103,7 @@ static struct snd_kcontrol_new alc262_base_mixer[] = {
         HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
         HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
         /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
-           HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
+           HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */
         HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
         HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
         HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
@@ -8124,7 +8125,7 @@ static struct snd_kcontrol_new alc262_hippo1_mixer[] = {
         HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
         HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
         /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
-           HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
+           HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */
         /*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/
         HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
         { } /* end */
@@ -9238,6 +9239,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = {
         SND_PCI_QUIRK(0x104d, 0x900e, "Sony ASSAMD", ALC262_SONY_ASSAMD),
         SND_PCI_QUIRK(0x104d, 0x9015, "Sony 0x9015", ALC262_SONY_ASSAMD),
         SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU),
+        SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU),
         SND_PCI_QUIRK(0x144d, 0xc032, "Samsung Q1 Ultra", ALC262_ULTRA),
         SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_BENQ_ED8),
         SND_PCI_QUIRK(0x17ff, 0x058d, "Benq T31-16", ALC262_BENQ_T31),
@@ -12993,8 +12995,8 @@ static struct snd_kcontrol_new alc662_lenovo_101e_mixer[] = {
 static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
         HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
 
-        HDA_CODEC_VOLUME("LineOut Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-        HDA_CODEC_MUTE("LineOut Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+        HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+        HDA_CODEC_MUTE("Line-Out Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 
         HDA_CODEC_VOLUME("e-Mic Boost", 0x18, 0, HDA_INPUT),
         HDA_CODEC_VOLUME("e-Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -13007,8 +13009,8 @@ static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
 };
 
 static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = {
-        HDA_CODEC_VOLUME("LineOut Playback Volume", 0x02, 0x0, HDA_OUTPUT),
-        HDA_CODEC_MUTE("LineOut Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+        HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+        HDA_CODEC_MUTE("Line-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT),
         HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
         HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT),
         HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
diff --git a/sound/pci/ice1712/phase.c b/sound/pci/ice1712/phase.c
index 9ab4a9f383cb..5a158b73dcaa 100644
--- a/sound/pci/ice1712/phase.c
+++ b/sound/pci/ice1712/phase.c
@@ -51,7 +51,7 @@
 struct phase28_spec {
         unsigned short master[2];
         unsigned short vol[8];
-} phase28;
+};
 
 /* WM8770 registers */
 #define WM_DAC_ATTEN            0x00    /* DAC1-8 analog attenuation */
diff --git a/sound/pci/ice1712/revo.c b/sound/pci/ice1712/revo.c
index ddd5fc8d4fe1..301bf929acd9 100644
--- a/sound/pci/ice1712/revo.c
+++ b/sound/pci/ice1712/revo.c
@@ -36,7 +36,7 @@
 struct revo51_spec {
         struct snd_i2c_device *dev;
         struct snd_pt2258 *pt2258;
-} revo51;
+};
 
 static void revo_i2s_mclk_changed(struct snd_ice1712 *ice)
 {
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 061072c7db03..c52abd0bf22e 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1708,6 +1708,12 @@ static struct ac97_pcm ac97_pcm_defs[] __devinitdata = {
 };
 
 static struct ac97_quirk ac97_quirks[] __devinitdata = {
+        {
+                .subvendor = 0x0e11,
+                .subdevice = 0x000e,
+                .name = "Compaq Deskpro EN",    /* AD1885 */
+                .type = AC97_TUNE_HP_ONLY
+        },
         {
                 .subvendor = 0x0e11,
                 .subdevice = 0x008a,
@@ -1740,6 +1746,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
         },
         {
                 .subvendor = 0x1025,
+                .subdevice = 0x0082,
+                .name = "Acer Travelmate 2310",
+                .type = AC97_TUNE_HP_ONLY
+        },
+        {
+                .subvendor = 0x1025,
                 .subdevice = 0x0083,
                 .name = "Acer Aspire 3003LCi",
                 .type = AC97_TUNE_HP_ONLY
diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index 3ea1f05228a1..666f69a3312e 100644
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -150,6 +150,7 @@ static const struct oxygen_model model_hifier = {
         .shortname = "C-Media CMI8787",
         .longname = "C-Media Oxygen HD Audio",
         .chip = "CMI8788",
+        .owner = THIS_MODULE,
         .init = hifier_init,
         .control_filter = hifier_control_filter,
         .mixer_init = hifier_mixer_init,
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 40e92f5cd69c..d163397b85cc 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -389,6 +389,7 @@ static const struct oxygen_model model_xonar = {
         .shortname = "Asus AV200",
         .longname = "Asus Virtuoso 200",
         .chip = "AV200",
+        .owner = THIS_MODULE,
         .init = xonar_init,
         .control_filter = xonar_control_filter,
         .mixer_init = xonar_mixer_init,
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 710e0287ef8c..569ecaca0e8b 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -681,8 +681,8 @@ static const struct aic3x_rate_divs aic3x_divs[] = {
         {22579200, 48000, 48000, 0x0, 8, 7075},
         {33868800, 48000, 48000, 0x0, 5, 8049},
         /* 64k */
-        {22579200, 96000, 96000, 0x1, 8, 7075},
-        {33868800, 96000, 96000, 0x1, 5, 8049},
+        {22579200, 64000, 96000, 0x1, 8, 7075},
+        {33868800, 64000, 96000, 0x1, 5, 8049},
         /* 88.2k */
         {22579200, 88200, 88200, 0x0, 8, 0},
         {33868800, 88200, 88200, 0x0, 5, 3333},
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 590baea3c4c3..524f7450804f 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -176,7 +176,8 @@ static int wm9712_add_controls(struct snd_soc_codec *codec)
  * the codec only has a single control that is shared by both channels.
  * This makes it impossible to determine the audio path.
  */
-static int mixer_event (struct snd_soc_dapm_widget *w, int event)
+static int mixer_event(struct snd_soc_dapm_widget *w,
+        struct snd_kcontrol *k, int event)
 {
         u16 l, r, beep, line, phone, mic, pcm, aux;
 
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 3f34e531bebf..1a70a6ac98ce 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -215,7 +215,8 @@ static int corgi_set_spk(struct snd_kcontrol *kcontrol,
         return 1;
 }
 
-static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
+static int corgi_amp_event(struct snd_soc_dapm_widget *w,
+        struct snd_kcontrol *k, int event)
 {
         if (SND_SOC_DAPM_EVENT_ON(event))
                 set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
@@ -225,7 +226,8 @@ static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
         return 0;
 }
 
-static int corgi_mic_event(struct snd_soc_dapm_widget *w, int event)
+static int corgi_mic_event(struct snd_soc_dapm_widget *w,
+        struct snd_kcontrol *k, int event)
 {
         if (SND_SOC_DAPM_EVENT_ON(event))
                 set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 5ae59bd309a3..4fbf8bba9627 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -196,7 +196,8 @@ static int poodle_set_spk(struct snd_kcontrol *kcontrol,
         return 1;
 }
 
-static int poodle_amp_event(struct snd_soc_dapm_widget *w, int event)
+static int poodle_amp_event(struct snd_soc_dapm_widget *w,
+        struct snd_kcontrol *k, int event)
 {
         if (SND_SOC_DAPM_EVENT_ON(event))
                 locomo_gpio_write(&poodle_locomo_device.dev,
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index d56709e15435..ecca39033fcc 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -215,7 +215,8 @@ static int spitz_set_spk(struct snd_kcontrol *kcontrol,
         return 1;
 }
 
-static int spitz_mic_bias(struct snd_soc_dapm_widget *w, int event)
+static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
+        struct snd_kcontrol *k, int event)
 {
         if (machine_is_borzoi() || machine_is_spitz()) {
                 if (SND_SOC_DAPM_EVENT_ON(event))
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index e4d40b528ca4..7346d7e5d066 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -135,7 +135,8 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol,
 }
 
 /* tosa dapm event handlers */
-static int tosa_hp_event(struct snd_soc_dapm_widget *w, int event)
+static int tosa_hp_event(struct snd_soc_dapm_widget *w,
+        struct snd_kcontrol *k, int event)
 {
         if (SND_SOC_DAPM_EVENT_ON(event))
                 set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 8fa935665702..675672f313be 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -479,6 +479,33 @@ static int retire_playback_sync_urb_hs(struct snd_usb_substream *subs,
         return 0;
 }
 
+/*
+ * process after E-Mu 0202/0404 high speed playback sync complete
+ *
+ * These devices return the number of samples per packet instead of the number
+ * of samples per microframe.
+ */
+static int retire_playback_sync_urb_hs_emu(struct snd_usb_substream *subs,
+                                           struct snd_pcm_runtime *runtime,
+                                           struct urb *urb)
+{
+        unsigned int f;
+        unsigned long flags;
+
+        if (urb->iso_frame_desc[0].status == 0 &&
+            urb->iso_frame_desc[0].actual_length == 4) {
+                f = combine_quad((u8*)urb->transfer_buffer) & 0x0fffffff;
+                f >>= subs->datainterval;
+                if (f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax) {
+                        spin_lock_irqsave(&subs->lock, flags);
+                        subs->freqm = f;
+                        spin_unlock_irqrestore(&subs->lock, flags);
+                }
+        }
+
+        return 0;
+}
+
 /* determine the number of frames in the next packet */
 static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs)
 {
@@ -2219,10 +2246,17 @@ static void init_substream(struct snd_usb_stream *as, int stream, struct audiofo
         subs->stream = as;
         subs->direction = stream;
         subs->dev = as->chip->dev;
-        if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+        if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) {
                 subs->ops = audio_urb_ops[stream];
-        else
+        } else {
                 subs->ops = audio_urb_ops_high_speed[stream];
+                switch (as->chip->usb_id) {
+                case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
+                case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
+                        subs->ops.retire_sync = retire_playback_sync_urb_hs_emu;
+                        break;
+                }
+        }
         snd_pcm_set_ops(as->pcm, stream,
                         stream == SNDRV_PCM_STREAM_PLAYBACK ?
                         &snd_usb_playback_ops : &snd_usb_capture_ops);