1 files changed, 13 insertions, 12 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 0f1544f67400..08fbc8372ba4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -101,6 +101,7 @@ parameter is applicable:
         X86-64  X86-64 architecture is enabled.
                         More X86-64 boot options can be found in
                         Documentation/x86_64/boot-options.txt .
+        X86     Either 32bit or 64bit x86 (same as X86-32+X86-64)
 
 In addition, the following text indicates that the option:
 
@@ -1588,7 +1589,7 @@ and is between 256 and 4096 characters. It is defined in the file
                         See also Documentation/paride.txt.
 
         pci=option[,option...]  [PCI] various PCI subsystem options:
-                off             [X86-32] don't probe for the PCI bus
+                off             [X86] don't probe for the PCI bus
                 bios            [X86-32] force use of PCI BIOS, don't access
                                 the hardware directly. Use this if your machine
                                 has a non-standard PCI host bridge.
@@ -1596,9 +1597,9 @@ and is between 256 and 4096 characters. It is defined in the file
                                 hardware access methods are allowed. Use this
                                 if you experience crashes upon bootup and you
                                 suspect they are caused by the BIOS.
-                conf1           [X86-32] Force use of PCI Configuration
+                conf1           [X86] Force use of PCI Configuration
                                 Mechanism 1.
-                conf2           [X86-32] Force use of PCI Configuration
+                conf2           [X86] Force use of PCI Configuration
                                 Mechanism 2.
                 noaer           [PCIE] If the PCIEAER kernel config parameter is
                                 enabled, this kernel boot option can be used to
@@ -1618,37 +1619,37 @@ and is between 256 and 4096 characters. It is defined in the file
                                 this option if the kernel is unable to allocate
                                 IRQs or discover secondary PCI buses on your
                                 motherboard.
-                rom             [X86-32] Assign address space to expansion ROMs.
+                rom             [X86] Assign address space to expansion ROMs.
                                 Use with caution as certain devices share
                                 address decoders between ROMs and other
                                 resources.
-                norom           [X86-32,X86_64] Do not assign address space to
+                norom           [X86] Do not assign address space to
                                 expansion ROMs that do not already have
                                 BIOS assigned address ranges.
-                irqmask=0xMMMM  [X86-32] Set a bit mask of IRQs allowed to be
+                irqmask=0xMMMM  [X86] Set a bit mask of IRQs allowed to be
                                 assigned automatically to PCI devices. You can
                                 make the kernel exclude IRQs of your ISA cards
                                 this way.
-                pirqaddr=0xAAAAA        [X86-32] Specify the physical address
+                pirqaddr=0xAAAAA        [X86] Specify the physical address
                                 of the PIRQ table (normally generated
                                 by the BIOS) if it is outside the
                                 F0000h-100000h range.
-                lastbus=N       [X86-32] Scan all buses thru bus #N. Can be
+                lastbus=N       [X86] Scan all buses thru bus #N. Can be
                                 useful if the kernel is unable to find your
                                 secondary buses and you want to tell it
                                 explicitly which ones they are.
-                assign-busses   [X86-32] Always assign all PCI bus
+                assign-busses   [X86] Always assign all PCI bus
                                 numbers ourselves, overriding
                                 whatever the firmware may have done.
-                usepirqmask     [X86-32] Honor the possible IRQ mask stored
+                usepirqmask     [X86] Honor the possible IRQ mask stored
                                 in the BIOS $PIR table. This is needed on
                                 some systems with broken BIOSes, notably
                                 some HP Pavilion N5400 and Omnibook XE3
                                 notebooks. This will have no effect if ACPI
                                 IRQ routing is enabled.
-                noacpi          [X86-32] Do not use ACPI for IRQ routing
+                noacpi          [X86] Do not use ACPI for IRQ routing
                                 or for PCI scanning.
-                use_crs         [X86-32] Use _CRS for PCI resource
+                use_crs         [X86] Use _CRS for PCI resource
                                 allocation.
                 routeirq        Do IRQ routing for all PCI devices.
                                 This is normally done in pci_enable_device(),