82 files changed, 2047 insertions, 7078 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 433cf5e9ae04..5f7f7d7f77d2 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -24,6 +24,8 @@ DMA-mapping.txt
        - info for PCI drivers using DMA portably across all platforms.
 DocBook/
        - directory with DocBook templates etc. for kernel documentation.
+HOWTO
+        - The process and procedures of how to do Linux kernel development.
 IO-mapping.txt
        - how to access I/O mapped memory from within device drivers.
 IPMI.txt
@@ -256,6 +258,10 @@ specialix.txt
        - info on hardware/driver for specialix IO8+ multiport serial card.
 spinlocks.txt
        - info on using spinlocks to provide exclusive access in kernel.
+stable_api_nonsense.txt
+        - info on why the kernel does not have a stable in-kernel api or abi.
+stable_kernel_rules.txt
+        - rules and procedures for the -stable kernel releases.
 stallion.txt
        - info on using the Stallion multiport serial driver.
 svga.txt
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
new file mode 100644
index 000000000000..6c9e746267da
--- /dev/null
+++ b/Documentation/HOWTO
@@ -0,0 +1,618 @@
+HOWTO do Linux kernel development
+---------------------------------
+This is the be-all, end-all document on this topic.  It contains
+instructions on how to become a Linux kernel developer and how to learn
+to work with the Linux kernel development community.  It tries to not
+contain anything related to the technical aspects of kernel programming,
+but will help point you in the right direction for that.
+If anything in this document becomes out of date, please send in patches
+to the maintainer of this file, who is listed at the bottom of the
+document.
+Introduction
+------------
+So, you want to learn how to become a Linux kernel developer?  Or you
+have been told by your manager, "Go write a Linux driver for this
+device."  This document's goal is to teach you everything you need to
+know to achieve this by describing the process you need to go through,
+and hints on how to work with the community.  It will also try to
+explain some of the reasons why the community works like it does.
+The kernel is written mostly in C, with some architecture-dependent
+parts written in assembly. A good understanding of C is required for
+kernel development.  Assembly (any architecture) is not required unless
+you plan to do low-level development for that architecture.  Though they
+are not a good substitute for a solid C education and/or years of
+experience, the following books are good for, if anything, reference:
+ - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
+ - "Practical C Programming" by Steve Oualline [O'Reilly]
+The kernel is written using GNU C and the GNU toolchain.  While it
+adheres to the ISO C89 standard, it uses a number of extensions that are
+not featured in the standard.  The kernel is a freestanding C
+environment, with no reliance on the standard C library, so some
+portions of the C standard are not supported.  Arbitrary long long
+divisions and floating point are not allowed.  It can sometimes be
+difficult to understand the assumptions the kernel has on the toolchain
+and the extensions that it uses, and unfortunately there is no
+definitive reference for them.  Please check the gcc info pages (`info
+gcc`) for some information on them.
+Please remember that you are trying to learn how to work with the
+existing development community.  It is a diverse group of people, with
+high standards for coding, style and procedure.  These standards have
+been created over time based on what they have found to work best for
+such a large and geographically dispersed team.  Try to learn as much as
+possible about these standards ahead of time, as they are well
+documented; do not expect people to adapt to you or your company's way
+of doing things.
+Legal Issues
+------------
+The Linux kernel source code is released under the GPL.  Please see the
+file, COPYING, in the main directory of the source tree, for details on
+the license.  If you have further questions about the license, please
+contact a lawyer, and do not ask on the Linux kernel mailing list.  The
+people on the mailing lists are not lawyers, and you should not rely on
+their statements on legal matters.
+For common questions and answers about the GPL, please see:
+        http://www.gnu.org/licenses/gpl-faq.html
+Documentation
+------------
+The Linux kernel source tree has a large range of documents that are
+invaluable for learning how to interact with the kernel community.  When
+new features are added to the kernel, it is recommended that new
+documentation files are also added which explain how to use the feature.
+When a kernel change causes the interface that the kernel exposes to
+userspace to change, it is recommended that you send the information or
+a patch to the manual pages explaining the change to the manual pages
+maintainer at mtk-manpages@gmx.net.
+Here is a list of files that are in the kernel source tree that are
+required reading:
+  README
+    This file gives a short background on the Linux kernel and describes
+    what is necessary to do to configure and build the kernel.  People
+    who are new to the kernel should start here.
+  Documentation/Changes
+    This file gives a list of the minimum levels of various software
+    packages that are necessary to build and run the kernel
+    successfully.
+  Documentation/CodingStyle
+    This describes the Linux kernel coding style, and some of the
+    rationale behind it. All new code is expected to follow the
+    guidelines in this document. Most maintainers will only accept
+    patches if these rules are followed, and many people will only
+    review code if it is in the proper style.
+  Documentation/SubmittingPatches
+  Documentation/SubmittingDrivers
+    These files describe in explicit detail how to successfully create
+    and send a patch, including (but not limited to):
+       - Email contents
+       - Email format
+       - Who to send it to
+    Following these rules will not guarantee success (as all patches are
+    subject to scrutiny for content and style), but not following them
+    will almost always prevent it.
+    Other excellent descriptions of how to create patches properly are:
+        "The Perfect Patch"
+                http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+        "Linux kernel patch submission format"
+                http://linux.yyz.us/patch-format.html
+  Documentation/stable_api_nonsense.txt
+    This file describes the rationale behind the conscious decision to
+    not have a stable API within the kernel, including things like:
+      - Subsystem shim-layers (for compatibility?)
+      - Driver portability between Operating Systems.
+      - Mitigating rapid change within the kernel source tree (or
+        preventing rapid change)
+    This document is crucial for understanding the Linux development
+    philosophy and is very important for people moving to Linux from
+    development on other Operating Systems.
+  Documentation/SecurityBugs
+    If you feel you have found a security problem in the Linux kernel,
+    please follow the steps in this document to help notify the kernel
+    developers, and help solve the issue.
+  Documentation/ManagementStyle
+    This document describes how Linux kernel maintainers operate and the
+    shared ethos behind their methodologies.  This is important reading
+    for anyone new to kernel development (or anyone simply curious about
+    it), as it resolves a lot of common misconceptions and confusion
+    about the unique behavior of kernel maintainers.
+  Documentation/stable_kernel_rules.txt
+    This file describes the rules on how the stable kernel releases
+    happen, and what to do if you want to get a change into one of these
+    releases.
+  Documentation/kernel-docs.txt
+    A list of external documentation that pertains to kernel
+    development.  Please consult this list if you do not find what you
+    are looking for within the in-kernel documentation.
+  Documentation/applying-patches.txt
+    A good introduction describing exactly what a patch is and how to
+    apply it to the different development branches of the kernel.
+The kernel also has a large number of documents that can be
+automatically generated from the source code itself.  This includes a
+full description of the in-kernel API, and rules on how to handle
+locking properly.  The documents will be created in the
+Documentation/DocBook/ directory and can be generated as PDF,
+Postscript, HTML, and man pages by running:
+        make pdfdocs
+        make psdocs
+        make htmldocs
+        make mandocs
+respectively from the main kernel source directory.
+Becoming A Kernel Developer
+---------------------------
+If you do not know anything about Linux kernel development, you should
+look at the Linux KernelNewbies project:
+        http://kernelnewbies.org
+It consists of a helpful mailing list where you can ask almost any type
+of basic kernel development question (make sure to search the archives
+first, before asking something that has already been answered in the
+past.)  It also has an IRC channel that you can use to ask questions in
+real-time, and a lot of helpful documentation that is useful for
+learning about Linux kernel development.
+The website has basic information about code organization, subsystems,
+and current projects (both in-tree and out-of-tree). It also describes
+some basic logistical information, like how to compile a kernel and
+apply a patch.
+If you do not know where you want to start, but you want to look for
+some task to start doing to join into the kernel development community,
+go to the Linux Kernel Janitor's project:
+        http://janitor.kernelnewbies.org/
+It is a great place to start.  It describes a list of relatively simple
+problems that need to be cleaned up and fixed within the Linux kernel
+source tree.  Working with the developers in charge of this project, you
+will learn the basics of getting your patch into the Linux kernel tree,
+and possibly be pointed in the direction of what to go work on next, if
+you do not already have an idea.
+If you already have a chunk of code that you want to put into the kernel
+tree, but need some help getting it in the proper form, the
+kernel-mentors project was created to help you out with this.  It is a
+mailing list, and can be found at:
+        http://selenic.com/mailman/listinfo/kernel-mentors
+Before making any actual modifications to the Linux kernel code, it is
+imperative to understand how the code in question works.  For this
+purpose, nothing is better than reading through it directly (most tricky
+bits are commented well), perhaps even with the help of specialized
+tools.  One such tool that is particularly recommended is the Linux
+Cross-Reference project, which is able to present source code in a
+self-referential, indexed webpage format. An excellent up-to-date
+repository of the kernel code may be found at:
+        http://sosdg.org/~coywolf/lxr/
+The development process
+-----------------------
+Linux kernel development process currently consists of a few different
+main kernel "branches" and lots of different subsystem-specific kernel
+branches.  These different branches are:
+  - main 2.6.x kernel tree
+  - 2.6.x.y -stable kernel tree
+  - 2.6.x -git kernel patches
+  - 2.6.x -mm kernel patches
+  - subsystem specific kernel trees and patches
+2.6.x kernel tree
+-----------------
+2.6.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+process is as follows:
+  - As soon as a new kernel is released a two weeks window is open,
+    during this period of time maintainers can submit big diffs to
+    Linus, usually the patches that have already been included in the
+    -mm kernel for a few weeks.  The preferred way to submit big changes
+    is using git (the kernel's source management tool, more information
+    can be found at http://git.or.cz/) but plain patches are also just
+    fine.
+  - After two weeks a -rc1 kernel is released it is now possible to push
+    only patches that do not include new features that could affect the
+    stability of the whole kernel.  Please note that a whole new driver
+    (or filesystem) might be accepted after -rc1 because there is no
+    risk of causing regressions with such a change as long as the change
+    is self-contained and does not affect areas outside of the code that
+    is being added.  git can be used to send patches to Linus after -rc1
+    is released, but the patches need to also be sent to a public
+    mailing list for review.
+  - A new -rc is released whenever Linus deems the current git tree to
+    be in a reasonably sane state adequate for testing.  The goal is to
+    release a new -rc kernel every week.
+  - Process continues until the kernel is considered "ready", the
+    process should last around 6 weeks.
+It is worth mentioning what Andrew Morton wrote on the linux-kernel
+mailing list about kernel releases:
+        "Nobody knows when a kernel will be released, because it's
+        released according to perceived bug status, not according to a
+        preconceived timeline."
+2.6.x.y -stable kernel tree
+---------------------------
+Kernels with 4 digit versions are -stable kernels. They contain
+relatively small and critical fixes for security problems or significant
+regressions discovered in a given 2.6.x kernel.
+This is the recommended branch for users who want the most recent stable
+kernel and are not interested in helping test development/experimental
+versions.
+If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+kernel is the current stable kernel.
+2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
+released almost every other week.
+The file Documentation/stable_kernel_rules.txt in the kernel tree
+documents what kinds of changes are acceptable for the -stable tree, and
+how the release process works.
+2.6.x -git patches
+------------------
+These are daily snapshots of Linus' kernel tree which are managed in a
+git repository (hence the name.) These patches are usually released
+daily and represent the current state of Linus' tree.  They are more
+experimental than -rc kernels since they are generated automatically
+without even a cursory glance to see if they are sane.
+2.6.x -mm kernel patches
+------------------------
+These are experimental kernel patches released by Andrew Morton.  Andrew
+takes all of the different subsystem kernel trees and patches and mushes
+them together, along with a lot of patches that have been plucked from
+the linux-kernel mailing list.  This tree serves as a proving ground for
+new features and patches.  Once a patch has proved its worth in -mm for
+a while Andrew or the subsystem maintainer pushes it on to Linus for
+inclusion in mainline.
+It is heavily encouraged that all new patches get tested in the -mm tree
+before they are sent to Linus for inclusion in the main kernel tree.
+These kernels are not appropriate for use on systems that are supposed
+to be stable and they are more risky to run than any of the other
+branches.
+If you wish to help out with the kernel development process, please test
+and use these kernel releases and provide feedback to the linux-kernel
+mailing list if you have any problems, and if everything works properly.
+In addition to all the other experimental patches, these kernels usually
+also contain any changes in the mainline -git kernels available at the
+time of release.
+The -mm kernels are not released on a fixed schedule, but usually a few
+-mm kernels are released in between each -rc kernel (1 to 3 is common).
+Subsystem Specific kernel trees and patches
+-------------------------------------------
+A number of the different kernel subsystem developers expose their
+development trees so that others can see what is happening in the
+different areas of the kernel.  These trees are pulled into the -mm
+kernel releases as described above.
+Here is a list of some of the different kernel trees available:
+  git trees:
+    - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
+        kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+    - ACPI development tree, Len Brown <len.brown@intel.com>
+        kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+    - Block development tree, Jens Axboe <axboe@suse.de>
+        kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+    - DRM development tree, Dave Airlie <airlied@linux.ie>
+        kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+    - ia64 development tree, Tony Luck <tony.luck@intel.com>
+        kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+    - ieee1394 development tree, Jody McIntyre <scjody@modernduck.com>
+        kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
+    - infiniband, Roland Dreier <rolandd@cisco.com>
+        kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
+    - libata, Jeff Garzik <jgarzik@pobox.com>
+        kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
+    - network drivers, Jeff Garzik <jgarzik@pobox.com>
+        kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
+    - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
+        kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
+    - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+        kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+  Other git kernel trees can be found listed at http://kernel.org/git
+  quilt trees:
+    - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
+        kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+Bug Reporting
+-------------
+bugzilla.kernel.org is where the Linux kernel developers track kernel
+bugs.  Users are encouraged to report all bugs that they find in this
+tool.  For details on how to use the kernel bugzilla, please see:
+        http://test.kernel.org/bugzilla/faq.html
+The file REPORTING-BUGS in the main kernel source directory has a good
+template for how to report a possible kernel bug, and details what kind
+of information is needed by the kernel developers to help track down the
+problem.
+Mailing lists
+-------------
+As some of the above documents describe, the majority of the core kernel
+developers participate on the Linux Kernel Mailing list.  Details on how
+to subscribe and unsubscribe from the list can be found at:
+        http://vger.kernel.org/vger-lists.html#linux-kernel
+There are archives of the mailing list on the web in many different
+places.  Use a search engine to find these archives.  For example:
+        http://dir.gmane.org/gmane.linux.kernel
+It is highly recommended that you search the archives about the topic
+you want to bring up, before you post it to the list. A lot of things
+already discussed in detail are only recorded at the mailing list
+archives.
+Most of the individual kernel subsystems also have their own separate
+mailing list where they do their development efforts.  See the
+MAINTAINERS file for a list of what these lists are for the different
+groups.
+Many of the lists are hosted on kernel.org. Information on them can be
+found at:
+        http://vger.kernel.org/vger-lists.html
+Please remember to follow good behavioral habits when using the lists.
+Though a bit cheesy, the following URL has some simple guidelines for
+interacting with the list (or any list):
+        http://www.albion.com/netiquette/
+If multiple people respond to your mail, the CC: list of recipients may
+get pretty large. Don't remove anybody from the CC: list without a good
+reason, or don't reply only to the list address. Get used to receiving the
+mail twice, one from the sender and the one from the list, and don't try
+to tune that by adding fancy mail-headers, people will not like it.
+Remember to keep the context and the attribution of your replies intact,
+keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and
+add your statements between the individual quoted sections instead of
+writing at the top of the mail.
+If you add patches to your mail, make sure they are plain readable text
+as stated in Documentation/SubmittingPatches. Kernel developers don't
+want to deal with attachments or compressed patches; they may want
+to comment on individual lines of your patch, which works only that way.
+Make sure you use a mail program that does not mangle spaces and tab
+characters. A good first test is to send the mail to yourself and try
+to apply your own patch by yourself. If that doesn't work, get your
+mail program fixed or change it until it works.
+Above all, please remember to show respect to other subscribers.
+Working with the community
+--------------------------
+The goal of the kernel community is to provide the best possible kernel
+there is.  When you submit a patch for acceptance, it will be reviewed
+on its technical merits and those alone.  So, what should you be
+expecting?
+  - criticism
+  - comments
+  - requests for change
+  - requests for justification
+  - silence
+Remember, this is part of getting your patch into the kernel.  You have
+to be able to take criticism and comments about your patches, evaluate
+them at a technical level and either rework your patches or provide
+clear and concise reasoning as to why those changes should not be made.
+If there are no responses to your posting, wait a few days and try
+again, sometimes things get lost in the huge volume.
+What should you not do?
+  - expect your patch to be accepted without question
+  - become defensive
+  - ignore comments
+  - resubmit the patch without making any of the requested changes
+In a community that is looking for the best technical solution possible,
+there will always be differing opinions on how beneficial a patch is.
+You have to be cooperative, and willing to adapt your idea to fit within
+the kernel.  Or at least be willing to prove your idea is worth it.
+Remember, being wrong is acceptable as long as you are willing to work
+toward a solution that is right.
+It is normal that the answers to your first patch might simply be a list
+of a dozen things you should correct.  This does _not_ imply that your
+patch will not be accepted, and it is _not_ meant against you
+personally.  Simply correct all issues raised against your patch and
+resend it.
+Differences between the kernel community and corporate structures
+-----------------------------------------------------------------
+The kernel community works differently than most traditional corporate
+development environments.  Here are a list of things that you can try to
+do to try to avoid problems:
+  Good things to say regarding your proposed changes:
+    - "This solves multiple problems."
+    - "This deletes 2000 lines of code."
+    - "Here is a patch that explains what I am trying to describe."
+    - "I tested it on 5 different architectures..."
+    - "Here is a series of small patches that..."
+    - "This increases performance on typical machines..."
+  Bad things you should avoid saying:
+    - "We did it this way in AIX/ptx/Solaris, so therefore it must be
+      good..."
+    - "I've being doing this for 20 years, so..."
+    - "This is required for my company to make money"
+    - "This is for our Enterprise product line."
+    - "Here is my 1000 page design document that describes my idea"
+    - "I've been working on this for 6 months..."
+    - "Here's a 5000 line patch that..."
+    - "I rewrote all of the current mess, and here it is..."
+    - "I have a deadline, and this patch needs to be applied now."
+Another way the kernel community is different than most traditional
+software engineering work environments is the faceless nature of
+interaction.  One benefit of using email and irc as the primary forms of
+communication is the lack of discrimination based on gender or race.
+The Linux kernel work environment is accepting of women and minorities
+because all you are is an email address.  The international aspect also
+helps to level the playing field because you can't guess gender based on
+a person's name. A man may be named Andrea and a woman may be named Pat.
+Most women who have worked in the Linux kernel and have expressed an
+opinion have had positive experiences.
+The language barrier can cause problems for some people who are not
+comfortable with English.  A good grasp of the language can be needed in
+order to get ideas across properly on mailing lists, so it is
+recommended that you check your emails to make sure they make sense in
+English before sending them.
+Break up your changes
+---------------------
+The Linux kernel community does not gladly accept large chunks of code
+dropped on it all at once.  The changes need to be properly introduced,
+discussed, and broken up into tiny, individual portions.  This is almost
+the exact opposite of what companies are used to doing.  Your proposal
+should also be introduced very early in the development process, so that
+you can receive feedback on what you are doing.  It also lets the
+community feel that you are working with them, and not simply using them
+as a dumping ground for your feature.  However, don't send 50 emails at
+one time to a mailing list, your patch series should be smaller than
+that almost all of the time.
+The reasons for breaking things up are the following:
+1) Small patches increase the likelihood that your patches will be
+   applied, since they don't take much time or effort to verify for
+   correctness.  A 5 line patch can be applied by a maintainer with
+   barely a second glance. However, a 500 line patch may take hours to
+   review for correctness (the time it takes is exponentially
+   proportional to the size of the patch, or something).
+   Small patches also make it very easy to debug when something goes
+   wrong.  It's much easier to back out patches one by one than it is
+   to dissect a very large patch after it's been applied (and broken
+   something).
+2) It's important not only to send small patches, but also to rewrite
+   and simplify (or simply re-order) patches before submitting them.
+Here is an analogy from kernel developer Al Viro:
+        "Think of a teacher grading homework from a math student.  The
+        teacher does not want to see the student's trials and errors
+        before they came up with the solution. They want to see the
+        cleanest, most elegant answer.  A good student knows this, and
+        would never submit her intermediate work before the final
+        solution."
+        The same is true of kernel development. The maintainers and
+        reviewers do not want to see the thought process behind the
+        solution to the problem one is solving. They want to see a
+        simple and elegant solution."
+It may be challenging to keep the balance between presenting an elegant
+solution and working together with the community and discussing your
+unfinished work. Therefore it is good to get early in the process to
+get feedback to improve your work, but also keep your changes in small
+chunks that they may get already accepted, even when your whole task is
+not ready for inclusion now.
+Also realize that it is not acceptable to send patches for inclusion
+that are unfinished and will be "fixed up later."
+Justify your change
+-------------------
+Along with breaking up your patches, it is very important for you to let
+the Linux community know why they should add this change.  New features
+must be justified as being needed and useful.
+Document your change
+--------------------
+When sending in your patches, pay special attention to what you say in
+the text in your email.  This information will become the ChangeLog
+information for the patch, and will be preserved for everyone to see for
+all time.  It should describe the patch completely, containing:
+  - why the change is necessary
+  - the overall design approach in the patch
+  - implementation details
+  - testing results
+For more details on what this should all look like, please see the
+ChangeLog section of the document:
+  "The Perfect Patch"
+      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+All of these things are sometimes very hard to do. It can take years to
+perfect these practices (if at all). It's a continuous process of
+improvement that requires a lot of patience and determination. But
+don't give up, it's possible. Many have done it before, and each had to
+start exactly where you are now.
+----------
+Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
+to be based on text he had written, and to Randy Dunlap and Gerrit
+Huizenga for some of the list of things you should and should not say.
+Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
+Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
+Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
+David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for
+their review, comments, and contributions.  Without their help, this
+document would not have been possible.
+Maintainer: Greg Kroah-Hartman <greg@kroah.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 509927e40bbb..f239ac4762dd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -58,6 +58,7 @@ P: Person
 M: Mail patches to
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
+T: SCM tree type and URL.  Type is one of: git, hg, quilt.
 S: Status, one of the following:
        Supported:      Someone is actually paid to look after this.
@@ -183,6 +184,7 @@ P:	Len Brown
 M:      len.brown@intel.com
 L:      acpi-devel@lists.sourceforge.net
 W:      http://acpi.sourceforge.net/
+T:      git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
 S:      Maintained
 AD1816 SOUND DRIVER
@@ -418,6 +420,7 @@ BLOCK LAYER
 P:      Jens Axboe
 M:      axboe@suse.de
 L:      linux-kernel@vger.kernel.org
+T:      git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:      Maintained
 BLUETOOTH SUBSYSTEM
@@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS
 P:      Greg Kroah-Hartman
 M:      gregkh@suse.de
 L:      linux-kernel@vger.kernel.org
+T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:      Supported
 DRM DRIVERS
 P:      David Airlie
 M:      airlied@linux.ie
 L:      dri-devel@lists.sourceforge.net
+T:      git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:      Maintained
 DSCC4 DRIVER
@@ -1113,6 +1118,7 @@ P:	Jean Delvare
 M:      khali@linux-fr.org
 L:      lm-sensors@lm-sensors.org
 W:      http://www.lm-sensors.nu/
+T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:      Maintained
 I2O
@@ -1145,6 +1151,7 @@ P:	Tony Luck
 M:      tony.luck@intel.com
 L:      linux-ia64@vger.kernel.org
 W:      http://www.ia64-linux.org/
+T:      git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
 S:      Maintained
 SN-IA64 (Itanium) SUB-PLATFORM
@@ -1212,6 +1219,7 @@ P:	Jody McIntyre
 M:      scjody@steamballoon.com
 L:      linux1394-devel@lists.sourceforge.net
 W:      http://www.linux1394.org/
+T:      git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
 S:      Maintained
 IEEE 1394 OHCI DRIVER
@@ -1263,6 +1271,7 @@ P:	Hal Rosenstock
 M:      halr@voltaire.com
 L:      openib-general@openib.org
 W:      http://www.openib.org/
+T:      git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
 S:      Supported
 INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS
@@ -1436,6 +1445,7 @@ P:	Kai Germaschewski
 M:      kai@germaschewski.name
 P:      Sam Ravnborg
 M:      sam@ravnborg.org
+T:      git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
 S:      Maintained 
 KERNEL JANITORS
@@ -1782,6 +1792,7 @@ M:	akpm@osdl.org
 P:      Jeff Garzik
 M:      jgarzik@pobox.com
 L:      netdev@vger.kernel.org
+T:      git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
 S:      Maintained
 NETWORKING [GENERAL]
@@ -1959,6 +1970,7 @@ P:	Greg Kroah-Hartman
 M:      gregkh@suse.de
 L:      linux-kernel@vger.kernel.org
 L:      linux-pci@atrey.karlin.mff.cuni.cz
+T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:      Supported
 PCI HOTPLUG CORE
@@ -1980,6 +1992,7 @@ S:	Maintained
 PCMCIA SUBSYSTEM
 P:      Linux PCMCIA Team
 L:      http://lists.infradead.org/mailman/listinfo/linux-pcmcia
+T:      git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 S:      Maintained
 PCNET32 NETWORK DRIVER
@@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM
 P:      James E.J. Bottomley
 M:      James.Bottomley@SteelEye.com
 L:      linux-scsi@vger.kernel.org
+T:      git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 S:      Maintained
 SCSI TAPE DRIVER
@@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM:
 P:      Jeff Garzik
 M:      jgarzik@pobox.com
 L:      linux-ide@vger.kernel.org
+T:      git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:      Supported
 SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
@@ -2749,6 +2764,7 @@ M:	gregkh@suse.de
 L:      linux-usb-users@lists.sourceforge.net
 L:      linux-usb-devel@lists.sourceforge.net
 W:      http://www.linux-usb.org
+T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:      Supported
 USB UHCI DRIVER
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index e06f21f60dc5..301f2e9d262e 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -91,16 +91,17 @@ ENTRY(vhpt_miss)
         * (the "original") TLB miss, which may either be caused by an instruction
         * fetch or a data access (or non-access).
         *
-         * What we do here is normal TLB miss handing for the _original_ miss, followed
+         * What we do here is normal TLB miss handing for the _original_ miss,
-         * by inserting the TLB entry for the virtual page table page that the VHPT
+         * followed by inserting the TLB entry for the virtual page table page
-         * walker was attempting to access.  The latter gets inserted as long
+         * that the VHPT walker was attempting to access.  The latter gets
-         * as both L1 and L2 have valid mappings for the faulting address.
+         * inserted as long as page table entry above pte level have valid
-         * The TLB entry for the original miss gets inserted only if
+         * mappings for the faulting address.  The TLB entry for the original
-         * the L3 entry indicates that the page is present.
+         * miss gets inserted only if the pte entry indicates that the page is
+         * present.
         *
         * do_page_fault gets invoked in the following cases:
         *      - the faulting virtual address uses unimplemented address bits
-         *      - the faulting virtual address has no L1, L2, or L3 mapping
+         *      - the faulting virtual address has no valid page table mapping
         */
        mov r16=cr.ifa                          // get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
@@ -126,7 +127,7 @@ ENTRY(vhpt_miss)
 #endif
        ;;
        cmp.eq p6,p7=5,r17                      // is IFA pointing into to region 5?
-        shr.u r18=r22,PGDIR_SHIFT               // get bits 33-63 of the faulting address
+        shr.u r18=r22,PGDIR_SHIFT               // get bottom portion of pgd index bit
        ;;
 (p7)    dep r17=r17,r19,(PAGE_SHIFT-3),3        // put region number bits in place
@@ -137,38 +138,38 @@ ENTRY(vhpt_miss)
 (p6)    shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)    shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
        ;;
-(p6)    dep r17=r18,r19,3,(PAGE_SHIFT-3)        // r17=PTA + IFA(33,42)*8
+(p6)    dep r17=r18,r19,3,(PAGE_SHIFT-3)        // r17=pgd_offset for region 5
-(p7)    dep r17=r18,r17,3,(PAGE_SHIFT-6)        // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p7)    dep r17=r18,r17,3,(PAGE_SHIFT-6)        // r17=pgd_offset for region[0-4]
        cmp.eq p7,p6=0,r21                      // unused address bits all zeroes?
 #ifdef CONFIG_PGTABLE_4
-        shr.u r28=r22,PUD_SHIFT                 // shift L2 index into position
+        shr.u r28=r22,PUD_SHIFT                 // shift pud index into position
 #else
-        shr.u r18=r22,PMD_SHIFT                 // shift L3 index into position
+        shr.u r18=r22,PMD_SHIFT                 // shift pmd index into position
 #endif
        ;;
-        ld8 r17=[r17]                           // fetch the L1 entry (may be 0)
+        ld8 r17=[r17]                           // get *pgd (may be 0)
        ;;
-(p7)    cmp.eq p6,p7=r17,r0                     // was L1 entry NULL?
+(p7)    cmp.eq p6,p7=r17,r0                     // was pgd_present(*pgd) == NULL?
 #ifdef CONFIG_PGTABLE_4
-        dep r28=r28,r17,3,(PAGE_SHIFT-3)        // compute address of L2 page table entry
+        dep r28=r28,r17,3,(PAGE_SHIFT-3)        // r28=pud_offset(pgd,addr)
        ;;
-        shr.u r18=r22,PMD_SHIFT                 // shift L3 index into position
+        shr.u r18=r22,PMD_SHIFT                 // shift pmd index into position
-(p7)    ld8 r29=[r28]                           // fetch the L2 entry (may be 0)
+(p7)    ld8 r29=[r28]                           // get *pud (may be 0)
        ;;
-(p7)    cmp.eq.or.andcm p6,p7=r29,r0            // was L2 entry NULL?
+(p7)    cmp.eq.or.andcm p6,p7=r29,r0            // was pud_present(*pud) == NULL?
-        dep r17=r18,r29,3,(PAGE_SHIFT-3)        // compute address of L3 page table entry
+        dep r17=r18,r29,3,(PAGE_SHIFT-3)        // r17=pmd_offset(pud,addr)
 #else
-        dep r17=r18,r17,3,(PAGE_SHIFT-3)        // compute address of L3 page table entry
+        dep r17=r18,r17,3,(PAGE_SHIFT-3)        // r17=pmd_offset(pgd,addr)
 #endif
        ;;
-(p7)    ld8 r20=[r17]                           // fetch the L3 entry (may be 0)
+(p7)    ld8 r20=[r17]                           // get *pmd (may be 0)
-        shr.u r19=r22,PAGE_SHIFT                // shift L4 index into position
+        shr.u r19=r22,PAGE_SHIFT                // shift pte index into position
        ;;
-(p7)    cmp.eq.or.andcm p6,p7=r20,r0            // was L3 entry NULL?
+(p7)    cmp.eq.or.andcm p6,p7=r20,r0            // was pmd_present(*pmd) == NULL?
-        dep r21=r19,r20,3,(PAGE_SHIFT-3)        // compute address of L4 page table entry
+        dep r21=r19,r20,3,(PAGE_SHIFT-3)        // r21=pte_offset(pmd,addr)
        ;;
-(p7)    ld8 r18=[r21]                           // read the L4 PTE
+(p7)    ld8 r18=[r21]                           // read *pte
-        mov r19=cr.isr                          // cr.isr bit 0 tells us if this is an insn miss
+        mov r19=cr.isr                          // cr.isr bit 32 tells us if this is an insn miss
        ;;
 (p7)    tbit.z p6,p7=r18,_PAGE_P_BIT            // page present bit cleared?
        mov r22=cr.iha                          // get the VHPT address that caused the TLB miss
@@ -202,25 +203,33 @@ ENTRY(vhpt_miss)
        dv_serialize_data
        /*
-         * Re-check L2 and L3 pagetable.  If they changed, we may have received a ptc.g
+         * Re-check pagetable entry.  If they changed, we may have received a ptc.g
         * between reading the pagetable and the "itc".  If so, flush the entry we
-         * inserted and retry.
+         * inserted and retry.  At this point, we have:
+         *
+         * r28 = equivalent of pud_offset(pgd, ifa)
+         * r17 = equivalent of pmd_offset(pud, ifa)
+         * r21 = equivalent of pte_offset(pmd, ifa)
+         *
+         * r29 = *pud
+         * r20 = *pmd
+         * r18 = *pte
         */
-        ld8 r25=[r21]                           // read L4 entry again
+        ld8 r25=[r21]                           // read *pte again
-        ld8 r26=[r17]                           // read L3 PTE again
+        ld8 r26=[r17]                           // read *pmd again
 #ifdef CONFIG_PGTABLE_4
-        ld8 r18=[r28]                           // read L2 entry again
+        ld8 r19=[r28]                           // read *pud again
 #endif
        cmp.ne p6,p7=r0,r0
        ;;
-        cmp.ne.or.andcm p6,p7=r26,r20           // did L3 entry change
+        cmp.ne.or.andcm p6,p7=r26,r20           // did *pmd change
 #ifdef CONFIG_PGTABLE_4
-        cmp.ne.or.andcm p6,p7=r29,r18           // did L4 PTE change
+        cmp.ne.or.andcm p6,p7=r19,r29           // did *pud change
 #endif
        mov r27=PAGE_SHIFT<<2
        ;;
 (p6)    ptc.l r22,r27                           // purge PTE page translation
-(p7)    cmp.ne.or.andcm p6,p7=r25,r18           // did L4 PTE change
+(p7)    cmp.ne.or.andcm p6,p7=r25,r18           // did *pte change
        ;;
 (p6)    ptc.l r16,r27                           // purge translation
 #endif
@@ -235,19 +244,19 @@ END(vhpt_miss)
 ENTRY(itlb_miss)
        DBG_FAULT(1)
        /*
-         * The ITLB handler accesses the L3 PTE via the virtually mapped linear
+         * The ITLB handler accesses the PTE via the virtually mapped linear
         * page table.  If a nested TLB miss occurs, we switch into physical
-         * mode, walk the page table, and then re-execute the L3 PTE read
+         * mode, walk the page table, and then re-execute the PTE read and
-         * and go on normally after that.
+         * go on normally after that.
         */
        mov r16=cr.ifa                          // get virtual address
        mov r29=b0                              // save b0
        mov r31=pr                              // save predicates
 .itlb_fault:
-        mov r17=cr.iha                          // get virtual address of L3 PTE
+        mov r17=cr.iha                          // get virtual address of PTE
        movl r30=1f                             // load nested fault continuation point
        ;;
-1:      ld8 r18=[r17]                           // read L3 PTE
+1:      ld8 r18=[r17]                           // read *pte
        ;;
        mov b0=r29
        tbit.z p6,p0=r18,_PAGE_P_BIT            // page present bit cleared?
@@ -262,7 +271,7 @@ ENTRY(itlb_miss)
         */
        dv_serialize_data
-        ld8 r19=[r17]                           // read L3 PTE again and see if same
+        ld8 r19=[r17]                           // read *pte again and see if same
        mov r20=PAGE_SHIFT<<2                   // setup page size for purge
        ;;
        cmp.ne p7,p0=r18,r19
@@ -279,19 +288,19 @@ END(itlb_miss)
 ENTRY(dtlb_miss)
        DBG_FAULT(2)
        /*
-         * The DTLB handler accesses the L3 PTE via the virtually mapped linear
+         * The DTLB handler accesses the PTE via the virtually mapped linear
         * page table.  If a nested TLB miss occurs, we switch into physical
-         * mode, walk the page table, and then re-execute the L3 PTE read
+         * mode, walk the page table, and then re-execute the PTE read and
-         * and go on normally after that.
+         * go on normally after that.
         */
        mov r16=cr.ifa                          // get virtual address
        mov r29=b0                              // save b0
        mov r31=pr                              // save predicates
 dtlb_fault:
-        mov r17=cr.iha                          // get virtual address of L3 PTE
+        mov r17=cr.iha                          // get virtual address of PTE
        movl r30=1f                             // load nested fault continuation point
        ;;
-1:      ld8 r18=[r17]                           // read L3 PTE
+1:      ld8 r18=[r17]                           // read *pte
        ;;
        mov b0=r29
        tbit.z p6,p0=r18,_PAGE_P_BIT            // page present bit cleared?
@@ -306,7 +315,7 @@ dtlb_fault:
         */
        dv_serialize_data
-        ld8 r19=[r17]                           // read L3 PTE again and see if same
+        ld8 r19=[r17]                           // read *pte again and see if same
        mov r20=PAGE_SHIFT<<2                   // setup page size for purge
        ;;
        cmp.ne p7,p0=r18,r19
@@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss)
         *              r30:    continuation address
         *              r31:    saved pr
         *
-         * Output:      r17:    physical address of L3 PTE of faulting address
+         * Output:      r17:    physical address of PTE of faulting address
         *              r29:    saved b0
         *              r30:    continuation address
         *              r31:    saved pr
@@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss)
 (p6)    shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)    shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
        ;;
-(p6)    dep r17=r18,r19,3,(PAGE_SHIFT-3)        // r17=PTA + IFA(33,42)*8
+(p6)    dep r17=r18,r19,3,(PAGE_SHIFT-3)        // r17=pgd_offset for region 5
-(p7)    dep r17=r18,r17,3,(PAGE_SHIFT-6)        // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p7)    dep r17=r18,r17,3,(PAGE_SHIFT-6)        // r17=pgd_offset for region[0-4]
        cmp.eq p7,p6=0,r21                      // unused address bits all zeroes?
 #ifdef CONFIG_PGTABLE_4
-        shr.u r18=r22,PUD_SHIFT                 // shift L2 index into position
+        shr.u r18=r22,PUD_SHIFT                 // shift pud index into position
 #else
-        shr.u r18=r22,PMD_SHIFT                 // shift L3 index into position
+        shr.u r18=r22,PMD_SHIFT                 // shift pmd index into position
 #endif
        ;;
-        ld8 r17=[r17]                           // fetch the L1 entry (may be 0)
+        ld8 r17=[r17]                           // get *pgd (may be 0)
        ;;
-(p7)    cmp.eq p6,p7=r17,r0                     // was L1 entry NULL?
+(p7)    cmp.eq p6,p7=r17,r0                     // was pgd_present(*pgd) == NULL?
-        dep r17=r18,r17,3,(PAGE_SHIFT-3)        // compute address of L2 page table entry
+        dep r17=r18,r17,3,(PAGE_SHIFT-3)        // r17=p[u|m]d_offset(pgd,addr)
        ;;
 #ifdef CONFIG_PGTABLE_4
-(p7)    ld8 r17=[r17]                           // fetch the L2 entry (may be 0)
+(p7)    ld8 r17=[r17]                           // get *pud (may be 0)
-        shr.u r18=r22,PMD_SHIFT                 // shift L3 index into position
+        shr.u r18=r22,PMD_SHIFT                 // shift pmd index into position
        ;;
-(p7)    cmp.eq.or.andcm p6,p7=r17,r0            // was L2 entry NULL?
+(p7)    cmp.eq.or.andcm p6,p7=r17,r0            // was pud_present(*pud) == NULL?
-        dep r17=r18,r17,3,(PAGE_SHIFT-3)        // compute address of L2 page table entry
+        dep r17=r18,r17,3,(PAGE_SHIFT-3)        // r17=pmd_offset(pud,addr)
        ;;
 #endif
-(p7)    ld8 r17=[r17]                           // fetch the L3 entry (may be 0)
+(p7)    ld8 r17=[r17]                           // get *pmd (may be 0)
-        shr.u r19=r22,PAGE_SHIFT                // shift L4 index into position
+        shr.u r19=r22,PAGE_SHIFT                // shift pte index into position
        ;;
-(p7)    cmp.eq.or.andcm p6,p7=r17,r0            // was L3 entry NULL?
+(p7)    cmp.eq.or.andcm p6,p7=r17,r0            // was pmd_present(*pmd) == NULL?
-        dep r17=r19,r17,3,(PAGE_SHIFT-3)        // compute address of L4 page table entry
+        dep r17=r19,r17,3,(PAGE_SHIFT-3)        // r17=pte_offset(pmd,addr);
 (p6)    br.cond.spnt page_fault
        mov b0=r30
        br.sptk.many b0                         // return to continuation point
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 94df74bcc0ee..bb2efdd566a9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE
        def_bool y
        depends on MEMORY_HOTPLUG
-# Some NUMA nodes have memory ranges that span
-# other nodes.  Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.
-#
-# This is a relatively temporary hack that should
-# be able to go away when sparsemem is fully in
-# place
-config NODES_SPAN_OTHER_NODES
-        def_bool y
-        depends on NEED_MULTIPLE_NODES
 config PPC_64K_PAGES
        bool "64k page size"
        depends on PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 99dbea8c5c50..98f67c78d1bd 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -33,6 +33,8 @@ endif
 export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
+KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
 ifeq ($(CONFIG_PPC64),y)
 OLDARCH := ppc64
 SZ      := 64
@@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 AFLAGS += $(cpu-as-y)
 CFLAGS += $(cpu-as-y)
-# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
 head-y                          := arch/powerpc/kernel/head_32.o
 head-$(CONFIG_PPC64)            := arch/powerpc/kernel/head_64.o
 head-$(CONFIG_8xx)              := arch/powerpc/kernel/head_8xx.o
@@ -125,11 +124,11 @@ head-$(CONFIG_PPC64)		+= arch/powerpc/kernel/entry_64.o
 head-$(CONFIG_PPC_FPU)          += arch/powerpc/kernel/fpu.o
 core-y                          += arch/powerpc/kernel/ \
-                                   arch/$(OLDARCH)/kernel/ \
                                   arch/powerpc/mm/ \
                                   arch/powerpc/lib/ \
                                   arch/powerpc/sysdev/ \
                                   arch/powerpc/platforms/
+core-$(CONFIG_PPC32)            += arch/ppc/kernel/
 core-$(CONFIG_MATH_EMULATION)   += arch/ppc/math-emu/
 core-$(CONFIG_XMON)             += arch/powerpc/xmon/
 core-$(CONFIG_APUS)             += arch/ppc/amiga/
@@ -165,7 +164,7 @@ define archhelp
  @echo '                    (your) ~/bin/installkernel or'
  @echo '                    (distribution) /sbin/installkernel or'
  @echo '                    install to $$(INSTALL_PATH) and run lilo'
-  @echo '  *_defconfig     - Select default config from arch/$(ARCH)/ppc/configs'
+  @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
 endef
 archclean:
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 9cc442263939..d2f2ace56cd3 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -14,43 +14,42 @@
        .text
        .globl  _zimage_start
 _zimage_start:
-        bl      reloc_offset
+        bl      1f
-reloc_offset:
+1:
        mflr    r0
-        lis     r9,reloc_offset@ha
+        lis     r9,1b@ha
-        addi    r9,r9,reloc_offset@l
+        addi    r9,r9,1b@l
        subf.   r0,r9,r0
-        beq     clear_caches
+        beq     3f
-reloc_got2:
        lis     r9,__got2_start@ha
        addi    r9,r9,__got2_start@l
        lis     r8,__got2_end@ha
        addi    r8,r8,__got2_end@l
        subf.   r8,r9,r8
-        beq     clear_caches
+        beq     3f
        srwi.   r8,r8,2
        mtctr   r8
        add     r9,r0,r9
-reloc_got2_loop:
+2:
        lwz     r8,0(r9)
        add     r8,r8,r0
        stw     r8,0(r9)
        addi    r9,r9,4
-        bdnz    reloc_got2_loop
+        bdnz    2b
-clear_caches:
+3:
        lis     r9,_start@h
        add     r9,r0,r9
        lis     r8,_etext@ha
        addi    r8,r8,_etext@l
        add     r8,r0,r8
-1:      dcbf    r0,r9
+4:      dcbf    r0,r9
        icbi    r0,r9
        addi    r9,r9,0x20
        cmplwi  0,r9,8
-        blt     1b
+        blt     4b
        sync
        isync
diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig
index e79fd60bc122..b5ba3bbd96fb 100644
--- a/arch/ppc64/defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,18 +1,33 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
+# Linux kernel version: 2.6.15-rc1
-# Thu Oct 20 08:28:33 2005
+# Fri Nov 18 16:23:24 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
 #
 # Code maturity level options
@@ -41,7 +56,7 @@ CONFIG_CPUSETS=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+#
+# Block layer
+#
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 CONFIG_PPC_PSERIES=y
-CONFIG_PPC_BPA=y
 CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
+# CONFIG_PPC_CELL is not set
-CONFIG_PPC64=y
 CONFIG_PPC_OF=y
 CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
 CONFIG_U3_DART=y
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+# CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
-CONFIG_PPC_PMAC64=y
+CONFIG_IBMVIO=y
-CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_MPC106 is not set
-# CONFIG_POWER4_ONLY is not set
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC64=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
-CONFIG_NR_CPUS=32
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC_SPLPAR=y
+CONFIG_EEH=y
+CONFIG_SCANLOG=m
+CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_DISCONTIGMEM=y
+CONFIG_SPARSEMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
+# CONFIG_MEMORY_HOTPLUG is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_HOTPLUG_CPU=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 #
-# Bus Options
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_LEGACY_PROC is not set
@@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+CONFIG_KERNEL_START=0xc000000000000000
 #
 # Networking
@@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -301,6 +358,10 @@ CONFIG_LLC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
@@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y
 #
 # Parallel port support
 #
-CONFIG_PARPORT=m
+# CONFIG_PARPORT is not set
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
 #
 # Plug and Play support
@@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m
 # Block devices
 #
 CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 #
@@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y
 CONFIG_SCSI_IBMVSCSI=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
@@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
 CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
 #
 # Network device support
@@ -664,7 +714,6 @@ CONFIG_E100=y
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
 #
 # Ethernet (1000 Mbit)
@@ -684,7 +733,6 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
 # CONFIG_MV643XX_ETH is not set
 #
@@ -714,7 +762,6 @@ CONFIG_IBMOL=y
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 # CONFIG_PPP_FILTER is not set
@@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m
 CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
@@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVCS=m
@@ -834,6 +877,7 @@ CONFIG_HVCS=m
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 #
 # I2C support
@@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y
 CONFIG_I2C_KEYWEST=y
 CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -945,7 +990,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
@@ -960,6 +1004,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
@@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 #
@@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
 #
 # USB support
@@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
+# CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
@@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y
 #
 # USB port drivers
 #
-# CONFIG_USB_USS720 is not set
 #
 # USB Serial Converter support
@@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 #
 # SN Devices
@@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+#
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 #
 # Kernel hacking
@@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
+CONFIG_BOOTX_TEXT=y
 #
 # Security options
@@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m
 #
 # Hardware crypto devices
 #
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index b4745c918a4a..b589b196eb3f 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 4970e3721a84..9ed551b6c172 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,12 +12,12 @@ CFLAGS_btext.o		+= -fPIC
 endif
 obj-y                           := semaphore.o cputable.o ptrace.o syscalls.o \
-                                   irq.o signal_32.o pmc.o vdso.o
+                                   irq.o align.o signal_32.o pmc.o vdso.o
 obj-y                           += vdso32/
 obj-$(CONFIG_PPC64)             += setup_64.o binfmt_elf32.o sys_ppc32.o \
                                   signal_64.o ptrace32.o systbl.o \
                                   paca.o ioctl32.o cpu_setup_power4.o \
-                                   firmware.o sysfs.o udbg.o
+                                   firmware.o sysfs.o udbg.o idle_64.o
 obj-$(CONFIG_PPC64)             += vdso64/
 obj-$(CONFIG_ALTIVEC)           += vecemu.o vector.o
 obj-$(CONFIG_POWER4)            += idle_power4.o
@@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES)	+= udbg_16550.o
 obj-$(CONFIG_PPC_MAPLE)         += udbg_16550.o
 udbgscc-$(CONFIG_PPC64)         := udbg_scc.o
 obj-$(CONFIG_PPC_PMAC)          += $(udbgscc-y)
+obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
 ifeq ($(CONFIG_PPC_MERGE),y)
@@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP)		+= smp.o
 endif
+obj-$(CONFIG_PPC64)             += $(obj64-y)
 extra-$(CONFIG_PPC_FPU)         += fpu.o
 extra-$(CONFIG_PPC64)           += entry_64.o
diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c
index 256d5b592aa1..faaec9c6f78f 100644
--- a/arch/ppc64/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -7,6 +7,9 @@
 *   PowerPC 403GCX/405GP modifications.
 * Copyright (c) 2001-2002 PPC64 team, IBM Corp
 *   64-bit and Power4 support
+ * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp
+ *                    <benh@kernel.crashing.org>
+ *   Merge ppc32 and ppc64 implementations
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
@@ -38,10 +41,15 @@ struct aligninfo {
 #define F       8       /* to/from fp regs */
 #define U       0x10    /* update index register */
 #define M       0x20    /* multiple load/store */
-#define SW      0x40    /* byte swap */
+#define SW      0x40    /* byte swap int or ... */
+#define S       0x40    /* ... single-precision fp */
+#define SX      0x40    /* byte count in XER */
+#define HARD    0x80    /* string, stwcx. */
 #define DCBZ    0x5f    /* 8xx/82xx dcbz faults when cache not enabled */
+#define SWAP(a, b)      (t = (a), (a) = (b), (b) = t)
 /*
 * The PowerPC stores certain bits of the instruction that caused the
 * alignment exception in the DSISR register.  This array maps those
@@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = {
        { 2, LD+SE },           /* 00 0 0101: lha */
        { 2, ST },              /* 00 0 0110: sth */
        { 4, LD+M },            /* 00 0 0111: lmw */
-        { 4, LD+F },            /* 00 0 1000: lfs */
+        { 4, LD+F+S },          /* 00 0 1000: lfs */
        { 8, LD+F },            /* 00 0 1001: lfd */
-        { 4, ST+F },            /* 00 0 1010: stfs */
+        { 4, ST+F+S },          /* 00 0 1010: stfs */
        { 8, ST+F },            /* 00 0 1011: stfd */
        INVALID,                /* 00 0 1100 */
-        { 8, LD },              /* 00 0 1101: ld */
+        { 8, LD },              /* 00 0 1101: ld/ldu/lwa */
        INVALID,                /* 00 0 1110 */
-        { 8, ST },              /* 00 0 1111: std */
+        { 8, ST },              /* 00 0 1111: std/stdu */
        { 4, LD+U },            /* 00 1 0000: lwzu */
        INVALID,                /* 00 1 0001 */
        { 4, ST+U },            /* 00 1 0010: stwu */
@@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = {
        { 2, LD+SE+U },         /* 00 1 0101: lhau */
        { 2, ST+U },            /* 00 1 0110: sthu */
        { 4, ST+M },            /* 00 1 0111: stmw */
-        { 4, LD+F+U },          /* 00 1 1000: lfsu */
+        { 4, LD+F+S+U },        /* 00 1 1000: lfsu */
        { 8, LD+F+U },          /* 00 1 1001: lfdu */
-        { 4, ST+F+U },          /* 00 1 1010: stfsu */
+        { 4, ST+F+S+U },        /* 00 1 1010: stfsu */
        { 8, ST+F+U },          /* 00 1 1011: stfdu */
        INVALID,                /* 00 1 1100 */
        INVALID,                /* 00 1 1101 */
@@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = {
        { 4, LD+SE },           /* 01 0 0101: lwax */
        INVALID,                /* 01 0 0110 */
        INVALID,                /* 01 0 0111 */
-        { 0, LD },              /* 01 0 1000: lswx */
+        { 4, LD+M+HARD+SX },    /* 01 0 1000: lswx */
-        { 0, LD },              /* 01 0 1001: lswi */
+        { 4, LD+M+HARD },       /* 01 0 1001: lswi */
-        { 0, ST },              /* 01 0 1010: stswx */
+        { 4, ST+M+HARD+SX },    /* 01 0 1010: stswx */
-        { 0, ST },              /* 01 0 1011: stswi */
+        { 4, ST+M+HARD },       /* 01 0 1011: stswi */
        INVALID,                /* 01 0 1100 */
        { 8, LD+U },            /* 01 0 1101: ldu */
        INVALID,                /* 01 0 1110 */
@@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = {
        INVALID,                /* 01 1 1111 */
        INVALID,                /* 10 0 0000 */
        INVALID,                /* 10 0 0001 */
-        { 0, ST },              /* 10 0 0010: stwcx. */
+        INVALID,                /* 10 0 0010: stwcx. */
        INVALID,                /* 10 0 0011 */
        INVALID,                /* 10 0 0100 */
        INVALID,                /* 10 0 0101 */
@@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = {
        INVALID,                /* 10 1 1100 */
        INVALID,                /* 10 1 1101 */
        INVALID,                /* 10 1 1110 */
-        { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */
+        { 0, ST+HARD },         /* 10 1 1111: dcbz */
        { 4, LD },              /* 11 0 0000: lwzx */
        INVALID,                /* 11 0 0001 */
        { 4, ST },              /* 11 0 0010: stwx */
@@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = {
        { 2, LD+SE },           /* 11 0 0101: lhax */
        { 2, ST },              /* 11 0 0110: sthx */
        INVALID,                /* 11 0 0111 */
-        { 4, LD+F },            /* 11 0 1000: lfsx */
+        { 4, LD+F+S },          /* 11 0 1000: lfsx */
        { 8, LD+F },            /* 11 0 1001: lfdx */
-        { 4, ST+F },            /* 11 0 1010: stfsx */
+        { 4, ST+F+S },          /* 11 0 1010: stfsx */
        { 8, ST+F },            /* 11 0 1011: stfdx */
        INVALID,                /* 11 0 1100 */
        { 8, LD+M },            /* 11 0 1101: lmd */
@@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = {
        { 2, LD+SE+U },         /* 11 1 0101: lhaux */
        { 2, ST+U },            /* 11 1 0110: sthux */
        INVALID,                /* 11 1 0111 */
-        { 4, LD+F+U },          /* 11 1 1000: lfsux */
+        { 4, LD+F+S+U },        /* 11 1 1000: lfsux */
        { 8, LD+F+U },          /* 11 1 1001: lfdux */
-        { 4, ST+F+U },          /* 11 1 1010: stfsux */
+        { 4, ST+F+S+U },        /* 11 1 1010: stfsux */
        { 8, ST+F+U },          /* 11 1 1011: stfdux */
        INVALID,                /* 11 1 1100 */
        INVALID,                /* 11 1 1101 */
@@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = {
        INVALID,                /* 11 1 1111 */
 };
-#define SWAP(a, b)      (t = (a), (a) = (b), (b) = t)
+/*
+ * Create a DSISR value from the instruction
+ */
 static inline unsigned make_dsisr(unsigned instr)
 {
        unsigned dsisr;
-        
-        /* create a DSISR value from the instruction */
-        dsisr = (instr & 0x03ff0000) >> 16;                     /* bits  6:15 --> 22:31 */
+        /* bits  6:15 --> 22:31 */
-        
+        dsisr = (instr & 0x03ff0000) >> 16;
-        if ( IS_XFORM(instr) ) {
-                dsisr |= (instr & 0x00000006) << 14;            /* bits 29:30 --> 15:16 */
+        if (IS_XFORM(instr)) {
-                dsisr |= (instr & 0x00000040) << 8;             /* bit     25 -->    17 */
+                /* bits 29:30 --> 15:16 */
-                dsisr |= (instr & 0x00000780) << 3;             /* bits 21:24 --> 18:21 */
+                dsisr |= (instr & 0x00000006) << 14;
+                /* bit     25 -->    17 */
+                dsisr |= (instr & 0x00000040) << 8;
+                /* bits 21:24 --> 18:21 */
+                dsisr |= (instr & 0x00000780) << 3;
+        } else {
+                /* bit      5 -->    17 */
+                dsisr |= (instr & 0x04000000) >> 12;
+                /* bits  1: 4 --> 18:21 */
+                dsisr |= (instr & 0x78000000) >> 17;
+                /* bits 30:31 --> 12:13 */
+                if (IS_DSFORM(instr))
+                        dsisr |= (instr & 0x00000003) << 18;
        }
-        else {
-                dsisr |= (instr & 0x04000000) >> 12;            /* bit      5 -->    17 */
+        return dsisr;
-                dsisr |= (instr & 0x78000000) >> 17;            /* bits  1: 4 --> 18:21 */
+}
-                if ( IS_DSFORM(instr) ) {
-                        dsisr |= (instr & 0x00000003) << 18;    /* bits 30:31 --> 12:13 */
+/*
+ * The dcbz (data cache block zero) instruction
+ * gives an alignment fault if used on non-cacheable
+ * memory.  We handle the fault mainly for the
+ * case when we are running with the cache disabled
+ * for debugging.
+ */
+static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
+{
+        long __user *p;
+        int i, size;
+#ifdef __powerpc64__
+        size = ppc64_caches.dline_size;
+#else
+        size = L1_CACHE_BYTES;
+#endif
+        p = (long __user *) (regs->dar & -size);
+        if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
+                return -EFAULT;
+        for (i = 0; i < size / sizeof(long); ++i)
+                if (__put_user(0, p+i))
+                        return -EFAULT;
+        return 1;
+}
+/*
+ * Emulate load & store multiple instructions
+ * On 64-bit machines, these instructions only affect/use the
+ * bottom 4 bytes of each register, and the loads clear the
+ * top 4 bytes of the affected register.
+ */
+#ifdef CONFIG_PPC64
+#define REG_BYTE(rp, i)         *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4)
+#else
+#define REG_BYTE(rp, i)         *((u8 *)(rp) + (i))
+#endif
+static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
+                            unsigned int reg, unsigned int nb,
+                            unsigned int flags, unsigned int instr)
+{
+        unsigned long *rptr;
+        unsigned int nb0, i;
+        /*
+         * We do not try to emulate 8 bytes multiple as they aren't really
+         * available in our operating environments and we don't try to
+         * emulate multiples operations in kernel land as they should never
+         * be used/generated there at least not on unaligned boundaries
+         */
+        if (unlikely((nb > 4) || !user_mode(regs)))
+                return 0;
+        /* lmw, stmw, lswi/x, stswi/x */
+        nb0 = 0;
+        if (flags & HARD) {
+                if (flags & SX) {
+                        nb = regs->xer & 127;
+                        if (nb == 0)
+                                return 1;
+                } else {
+                        if (__get_user(instr,
+                                       (unsigned int __user *)regs->nip))
+                                return -EFAULT;
+                        nb = (instr >> 11) & 0x1f;
+                        if (nb == 0)
+                                nb = 32;
                }
+                if (nb + reg * 4 > 128) {
+                        nb0 = nb + reg * 4 - 128;
+                        nb = 128 - reg * 4;
+                }
+        } else {
+                /* lwm, stmw */
+                nb = (32 - reg) * 4;
        }
-        
-        return dsisr;
+        if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
+                return -EFAULT; /* bad address */
+        rptr = &regs->gpr[reg];
+        if (flags & LD) {
+                /*
+                 * This zeroes the top 4 bytes of the affected registers
+                 * in 64-bit mode, and also zeroes out any remaining
+                 * bytes of the last register for lsw*.
+                 */
+                memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long));
+                if (nb0 > 0)
+                        memset(&regs->gpr[0], 0,
+                               ((nb0 + 3) / 4) * sizeof(unsigned long));
+                for (i = 0; i < nb; ++i)
+                        if (__get_user(REG_BYTE(rptr, i), addr + i))
+                                return -EFAULT;
+                if (nb0 > 0) {
+                        rptr = &regs->gpr[0];
+                        addr += nb;
+                        for (i = 0; i < nb0; ++i)
+                                if (__get_user(REG_BYTE(rptr, i), addr + i))
+                                        return -EFAULT;
+                }
+        } else {
+                for (i = 0; i < nb; ++i)
+                        if (__put_user(REG_BYTE(rptr, i), addr + i))
+                                return -EFAULT;
+                if (nb0 > 0) {
+                        rptr = &regs->gpr[0];
+                        addr += nb;
+                        for (i = 0; i < nb0; ++i)
+                                if (__put_user(REG_BYTE(rptr, i), addr + i))
+                                        return -EFAULT;
+                }
+        }
+        return 1;
 }
-int
-fix_alignment(struct pt_regs *regs)
+/*
+ * Called on alignment exception. Attempts to fixup
+ *
+ * Return 1 on success
+ * Return 0 if unable to handle the interrupt
+ * Return -EFAULT if data address is bad
+ */
+int fix_alignment(struct pt_regs *regs)
 {
        unsigned int instr, nb, flags;
-        int t;
+        unsigned int reg, areg;
-        unsigned long reg, areg;
+        unsigned int dsisr;
-        unsigned long i;
-        int ret;
-        unsigned dsisr;
        unsigned char __user *addr;
        unsigned char __user *p;
-        unsigned long __user *lp;
+        int ret, t;
        union {
-                long ll;
+                u64 ll;
                double dd;
                unsigned char v[8];
                struct {
@@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs)
        } data;
        /*
-         * Return 1 on success
+         * We require a complete register set, if not, then our assembly
-         * Return 0 if unable to handle the interrupt
+         * is broken
-         * Return -EFAULT if data address is bad
         */
+        CHECK_FULL_REGS(regs);
        dsisr = regs->dsisr;
+        /* Some processors don't provide us with a DSISR we can use here,
+         * let's make one up from the instruction
+         */
        if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
-            unsigned int real_instr;
+                unsigned int real_instr;
-            if (__get_user(real_instr, (unsigned int __user *)regs->nip))
+                if (unlikely(__get_user(real_instr,
-                return 0;
+                                        (unsigned int __user *)regs->nip)))
-            dsisr = make_dsisr(real_instr);
+                        return -EFAULT;
+                dsisr = make_dsisr(real_instr);
        }
        /* extract the operation and registers from the dsisr */
@@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs)
        /* DAR has the operand effective address */
        addr = (unsigned char __user *)regs->dar;
-        /* A size of 0 indicates an instruction we don't support */
+        /* A size of 0 indicates an instruction we don't support, with
-        /* we also don't support the multiples (lmw, stmw, lmd, stmd) */
+         * the exception of DCBZ which is handled as a special case here
-        if ((nb == 0) || (flags & M))
-                return 0;               /* too hard or invalid instruction */
-        /*
-         * Special handling for dcbz
-         * dcbz may give an alignment exception for accesses to caching inhibited
-         * storage
         */
        if (instr == DCBZ)
-                addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES);
+                return emulate_dcbz(regs, addr);
+        if (unlikely(nb == 0))
+                return 0;
+        /* Load/Store Multiple instructions are handled in their own
+         * function
+         */
+        if (flags & M)
+                return emulate_multiple(regs, addr, reg, nb, flags, instr);
        /* Verify the address of the operand */
-        if (user_mode(regs)) {
+        if (unlikely(user_mode(regs) &&
-                if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
+                     !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ),
-                        return -EFAULT; /* bad address */
+                                addr, nb)))
-        }
+                return -EFAULT;
        /* Force the fprs into the save area so we can reference them */
        if (flags & F) {
-                if (!user_mode(regs))
+                /* userland only */
+                if (unlikely(!user_mode(regs)))
                        return 0;
                flush_fp_to_thread(current);
        }
-        
-        /* If we are loading, get the data from user space */
+        /* If we are loading, get the data from user space, else
+         * get it from register values
+         */
        if (flags & LD) {
                data.ll = 0;
                ret = 0;
@@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs)
                case 2:
                        ret |= __get_user(data.v[6], p++);
                        ret |= __get_user(data.v[7], p++);
-                        if (ret)
+                        if (unlikely(ret))
                                return -EFAULT;
                }
-        }
+        } else if (flags & F)
-        
+                data.dd = current->thread.fpr[reg];
-        /* If we are storing, get the data from the saved gpr or fpr */
+        else
-        if (flags & ST) {
+                data.ll = regs->gpr[reg];
-                if (flags & F) {
-                        if (nb == 4) {
+        /* Perform other misc operations like sign extension, byteswap,
-                                /* Doing stfs, have to convert to single */
+         * or floating point single precision conversion
-                                preempt_disable();
+         */
-                                enable_kernel_fp();
+        switch (flags & ~U) {
-                                cvt_df(&current->thread.fpr[reg], (float *)&data.v[4], &current->thread);
+        case LD+SE:     /* sign extend */
-                                disable_kernel_fp();
-                                preempt_enable();
-                        }
-                        else
-                                data.dd = current->thread.fpr[reg];
-                }
-                else 
-                        data.ll = regs->gpr[reg];
-        }
-        
-        /* Swap bytes as needed */
-        if (flags & SW) {
-                if (nb == 2)
-                        SWAP(data.v[6], data.v[7]);
-                else {  /* nb must be 4 */
-                        SWAP(data.v[4], data.v[7]);
-                        SWAP(data.v[5], data.v[6]);
-                }
-        }
-        
-        /* Sign extend as needed */
-        if (flags & SE) {
                if ( nb == 2 )
                        data.ll = data.x16.low16;
                else    /* nb must be 4 */
                        data.ll = data.x32.low32;
-        }
+                break;
-        
+        case LD+S:      /* byte-swap */
-        /* If we are loading, move the data to the gpr or fpr */
+        case ST+S:
-        if (flags & LD) {
+                if (nb == 2) {
-                if (flags & F) {
+                        SWAP(data.v[6], data.v[7]);
-                        if (nb == 4) {
+                } else {
-                                /* Doing lfs, have to convert to double */
+                        SWAP(data.v[4], data.v[7]);
-                                preempt_disable();
+                        SWAP(data.v[5], data.v[6]);
-                                enable_kernel_fp();
-                                cvt_fd((float *)&data.v[4], &current->thread.fpr[reg], &current->thread);
-                                disable_kernel_fp();
-                                preempt_enable();
-                        }
-                        else
-                                current->thread.fpr[reg] = data.dd;
                }
-                else
+                break;
-                        regs->gpr[reg] = data.ll;
+        /* Single-precision FP load and store require conversions... */
+        case LD+F+S:
+#ifdef CONFIG_PPC_FPU
+                preempt_disable();
+                enable_kernel_fp();
+                cvt_fd((float *)&data.v[4], &data.dd, &current->thread);
+                preempt_enable();
+#else
+                return 0;
+#endif
+                break;
+        case ST+F+S:
+#ifdef CONFIG_PPC_FPU
+                preempt_disable();
+                enable_kernel_fp();
+                cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
+                preempt_enable();
+#else
+                return 0;
+#endif
+                break;
        }
-        
-        /* If we are storing, copy the data to the user */
+        /* Store result to memory or update registers */
        if (flags & ST) {
                ret = 0;
                p = addr;
                switch (nb) {
-                case 128:       /* Special case - must be dcbz */
-                        lp = (unsigned long __user *)p;
-                        for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
-                                ret |= __put_user(0, lp++);
-                        break;
                case 8:
                        ret |= __put_user(data.v[0], p++);
                        ret |= __put_user(data.v[1], p++);
@@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs)
                        ret |= __put_user(data.v[6], p++);
                        ret |= __put_user(data.v[7], p++);
                }
-                if (ret)
+                if (unlikely(ret))
                        return -EFAULT;
-        }
+        } else if (flags & F)
-        
+                current->thread.fpr[reg] = data.dd;
+        else
+                regs->gpr[reg] = data.ll;
        /* Update RA as needed */
-        if (flags & U) {
+        if (flags & U)
                regs->gpr[areg] = regs->dar;
-        }
        return 1;
 }
diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c
index b879d3057ef8..b879d3057ef8 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/powerpc/kernel/idle_64.c
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index f6d84a75ed26..624a983a9676 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -27,14 +27,6 @@
        .text
-        .align  5
-_GLOBAL(__delay)
-        cmpwi   0,r3,0
-        mtctr   r3
-        beqlr
-1:      bdnz    1b
-        blr
 /*
 * This returns the high 64 bits of the product of two 64-bit numbers.
 */
diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c
index c0fcd29918ce..c0fcd29918ce 100644
--- a/arch/ppc64/kernel/nvram.c
+++ b/arch/powerpc/kernel/nvram_64.c
diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c
index 7b948662704c..635d3b9a8811 100644
--- a/arch/powerpc/kernel/rtas-rtc.c
+++ b/arch/powerpc/kernel/rtas-rtc.c
@@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void)
 {
        int ret[8];
        int error, wait_time;
-        unsigned long max_wait_tb;
+        u64 max_wait_tb;
        max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
        do {
@@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
 {
        int ret[8];
        int error, wait_time;
-        unsigned long max_wait_tb;
+        u64 max_wait_tb;
        max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
        do {
@@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
 int rtas_set_rtc_time(struct rtc_time *tm)
 {
        int error, wait_time;
-        unsigned long max_wait_tb;
+        u64 max_wait_tb;
        max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
        do {
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 070b4b458aaf..de8479769bb7 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -130,6 +130,34 @@ unsigned long tb_last_stamp;
 */
 DEFINE_PER_CPU(unsigned long, last_jiffy);
+void __delay(unsigned long loops)
+{
+        unsigned long start;
+        int diff;
+        if (__USE_RTC()) {
+                start = get_rtcl();
+                do {
+                        /* the RTCL register wraps at 1000000000 */
+                        diff = get_rtcl() - start;
+                        if (diff < 0)
+                                diff += 1000000000;
+                } while (diff < loops);
+        } else {
+                start = get_tbl();
+                while (get_tbl() - start < loops)
+                        HMT_low();
+                HMT_medium();
+        }
+}
+EXPORT_SYMBOL(__delay);
+void udelay(unsigned long usecs)
+{
+        __delay(tb_ticks_per_usec * usecs);
+}
+EXPORT_SYMBOL(udelay);
 static __inline__ void timer_check_rtc(void)
 {
        /*
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 4099ddab9205..dda5f2c72c25 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -257,6 +257,13 @@ void __init chrp_setup_arch(void)
        if (rtas_token("display-character") >= 0)
                ppc_md.progress = rtas_progress;
+        /* use RTAS time-of-day routines if available */
+        if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+                ppc_md.get_boot_time    = rtas_get_boot_time;
+                ppc_md.get_rtc_time     = rtas_get_rtc_time;
+                ppc_md.set_rtc_time     = rtas_set_rtc_time;
+        }
 #ifdef CONFIG_BOOTX_TEXT
        if (ppc_md.progress == NULL && boot_text_mapped)
                ppc_md.progress = btext_progress;
@@ -505,9 +512,11 @@ void __init chrp_init(void)
        ppc_md.halt           = rtas_halt;
        ppc_md.time_init      = chrp_time_init;
+        ppc_md.calibrate_decr = chrp_calibrate_decr;
+        /* this may get overridden with rtas routines later... */
        ppc_md.set_rtc_time   = chrp_set_rtc_time;
        ppc_md.get_rtc_time   = chrp_get_rtc_time;
-        ppc_md.calibrate_decr = chrp_calibrate_decr;
 #ifdef CONFIG_SMP
        smp_ops = &chrp_smp_ops;
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index bb2315997d45..b616053bc331 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -34,6 +34,7 @@
 #include <asm/machdep.h>
 #include <asm/smp.h>
 #include <asm/mpic.h>
+#include <asm/rtas.h>
 static void __devinit smp_chrp_kick_cpu(int nr)
 {
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 9e53535ddb82..737ee5d9f0aa 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg)
        chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-        tm.tm_year -= 1900;
        if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
                BIN_TO_BCD(tm.tm_sec);
                BIN_TO_BCD(tm.tm_min);
@@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm)
                BCD_TO_BIN(mon);
                BCD_TO_BIN(year);
        }
-        if ((year += 1900) < 1970)
+        if (year < 70)
                year += 100;
        tm->tm_sec = sec;
        tm->tm_min = min;
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 40fc07a8e606..15846cc938ac 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm)
        return 0;
 }
+static struct resource rtc_iores = {
+        .name = "rtc",
+        .flags = IORESOURCE_BUSY,
+};
 unsigned long __init maple_get_boot_time(void)
 {
        struct rtc_time tm;
@@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void)
                printk(KERN_INFO "Maple: No device node for RTC, assuming "
                       "legacy address (0x%x)\n", maple_rtc_addr);
        }
-        
+        rtc_iores.start = maple_rtc_addr;
+        rtc_iores.end = maple_rtc_addr + 7;
+        request_resource(&ioport_resource, &rtc_iores);
        maple_get_rtc_time(&tm);
        return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
                      tm.tm_hour, tm.tm_min, tm.tm_sec);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 79de2310e70b..c8d2a40dc5b4 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state;
 static int ibm_read_slot_reset_state2;
 static int ibm_slot_error_detail;
-static int eeh_subsystem_enabled;
+int eeh_subsystem_enabled;
+EXPORT_SYMBOL(eeh_subsystem_enabled);
 /* Lock to avoid races due to multiple reports of an error */
 static DEFINE_SPINLOCK(confirm_error_lock);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index b9d9732b2e06..4a465f067ede 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void)
                lpaca->lppaca.idle = 1;
                if (!need_resched()) {
-                        start_snooze = __get_tb() +
+                        start_snooze = get_tb() +
                                *smt_snooze_delay * tb_ticks_per_usec;
                        while (!need_resched() && !cpu_is_offline(cpu)) {
@@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void)
                                HMT_very_low();
                                if (*smt_snooze_delay != 0 &&
-                                    __get_tb() > start_snooze) {
+                                    get_tb() > start_snooze) {
                                        HMT_medium();
                                        dedicated_idle_sleep(cpu);
                                }
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 17a4da65e275..0bb23fce4293 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4)		+= idle_power4.o
 extra-y                         += vmlinux.lds
 obj-y                           := entry.o traps.o idle.o time.o misc.o \
-                                        process.o align.o \
+                                        process.o \
                                        setup.o \
                                        ppc_htab.o
 obj-$(CONFIG_6xx)               += l2cr.o cpu_setup_6xx.o
@@ -38,7 +38,7 @@ endif
 # These are here while we do the architecture merge
 else
-obj-y                           := idle.o align.o
+obj-y                           := idle.o
 obj-$(CONFIG_6xx)               += l2cr.o cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)  += swsusp.o
 obj-$(CONFIG_MODULES)           += module.o
diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c
deleted file mode 100644
index ab398c4b70b6..000000000000
--- a/arch/ppc/kernel/align.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * align.c - handle alignment exceptions for the Power PC.
- *
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Copyright (c) 1998-1999 TiVo, Inc.
- *   PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *   PowerPC 403GCX/405GP modifications.
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/cache.h>
-struct aligninfo {
-        unsigned char len;
-        unsigned char flags;
-};
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-#define OPCD(inst)      (((inst) & 0xFC000000) >> 26)
-#define RS(inst)        (((inst) & 0x03E00000) >> 21)
-#define RA(inst)        (((inst) & 0x001F0000) >> 16)
-#define IS_XFORM(code)  ((code) == 31)
-#endif
-#define INVALID { 0, 0 }
-#define LD      1       /* load */
-#define ST      2       /* store */
-#define SE      4       /* sign-extend value */
-#define F       8       /* to/from fp regs */
-#define U       0x10    /* update index register */
-#define M       0x20    /* multiple load/store */
-#define S       0x40    /* single-precision fp, or byte-swap value */
-#define SX      0x40    /* byte count in XER */
-#define HARD    0x80    /* string, stwcx. */
-#define DCBZ    0x5f    /* 8xx/82xx dcbz faults when cache not enabled */
-/*
- * The PowerPC stores certain bits of the instruction that caused the
- * alignment exception in the DSISR register.  This array maps those
- * bits to information about the operand length and what the
- * instruction would do.
- */
-static struct aligninfo aligninfo[128] = {
-        { 4, LD },              /* 00 0 0000: lwz / lwarx */
-        INVALID,                /* 00 0 0001 */
-        { 4, ST },              /* 00 0 0010: stw */
-        INVALID,                /* 00 0 0011 */
-        { 2, LD },              /* 00 0 0100: lhz */
-        { 2, LD+SE },           /* 00 0 0101: lha */
-        { 2, ST },              /* 00 0 0110: sth */
-        { 4, LD+M },            /* 00 0 0111: lmw */
-        { 4, LD+F+S },          /* 00 0 1000: lfs */
-        { 8, LD+F },            /* 00 0 1001: lfd */
-        { 4, ST+F+S },          /* 00 0 1010: stfs */
-        { 8, ST+F },            /* 00 0 1011: stfd */
-        INVALID,                /* 00 0 1100 */
-        INVALID,                /* 00 0 1101: ld/ldu/lwa */
-        INVALID,                /* 00 0 1110 */
-        INVALID,                /* 00 0 1111: std/stdu */
-        { 4, LD+U },            /* 00 1 0000: lwzu */
-        INVALID,                /* 00 1 0001 */
-        { 4, ST+U },            /* 00 1 0010: stwu */
-        INVALID,                /* 00 1 0011 */
-        { 2, LD+U },            /* 00 1 0100: lhzu */
-        { 2, LD+SE+U },         /* 00 1 0101: lhau */
-        { 2, ST+U },            /* 00 1 0110: sthu */
-        { 4, ST+M },            /* 00 1 0111: stmw */
-        { 4, LD+F+S+U },        /* 00 1 1000: lfsu */
-        { 8, LD+F+U },          /* 00 1 1001: lfdu */
-        { 4, ST+F+S+U },        /* 00 1 1010: stfsu */
-        { 8, ST+F+U },          /* 00 1 1011: stfdu */
-        INVALID,                /* 00 1 1100 */
-        INVALID,                /* 00 1 1101 */
-        INVALID,                /* 00 1 1110 */
-        INVALID,                /* 00 1 1111 */
-        INVALID,                /* 01 0 0000: ldx */
-        INVALID,                /* 01 0 0001 */
-        INVALID,                /* 01 0 0010: stdx */
-        INVALID,                /* 01 0 0011 */
-        INVALID,                /* 01 0 0100 */
-        INVALID,                /* 01 0 0101: lwax */
-        INVALID,                /* 01 0 0110 */
-        INVALID,                /* 01 0 0111 */
-        { 4, LD+M+HARD+SX },    /* 01 0 1000: lswx */
-        { 4, LD+M+HARD },       /* 01 0 1001: lswi */
-        { 4, ST+M+HARD+SX },    /* 01 0 1010: stswx */
-        { 4, ST+M+HARD },       /* 01 0 1011: stswi */
-        INVALID,                /* 01 0 1100 */
-        INVALID,                /* 01 0 1101 */
-        INVALID,                /* 01 0 1110 */
-        INVALID,                /* 01 0 1111 */
-        INVALID,                /* 01 1 0000: ldux */
-        INVALID,                /* 01 1 0001 */
-        INVALID,                /* 01 1 0010: stdux */
-        INVALID,                /* 01 1 0011 */
-        INVALID,                /* 01 1 0100 */
-        INVALID,                /* 01 1 0101: lwaux */
-        INVALID,                /* 01 1 0110 */
-        INVALID,                /* 01 1 0111 */
-        INVALID,                /* 01 1 1000 */
-        INVALID,                /* 01 1 1001 */
-        INVALID,                /* 01 1 1010 */
-        INVALID,                /* 01 1 1011 */
-        INVALID,                /* 01 1 1100 */
-        INVALID,                /* 01 1 1101 */
-        INVALID,                /* 01 1 1110 */
-        INVALID,                /* 01 1 1111 */
-        INVALID,                /* 10 0 0000 */
-        INVALID,                /* 10 0 0001 */
-        { 0, ST+HARD },         /* 10 0 0010: stwcx. */
-        INVALID,                /* 10 0 0011 */
-        INVALID,                /* 10 0 0100 */
-        INVALID,                /* 10 0 0101 */
-        INVALID,                /* 10 0 0110 */
-        INVALID,                /* 10 0 0111 */
-        { 4, LD+S },            /* 10 0 1000: lwbrx */
-        INVALID,                /* 10 0 1001 */
-        { 4, ST+S },            /* 10 0 1010: stwbrx */
-        INVALID,                /* 10 0 1011 */
-        { 2, LD+S },            /* 10 0 1100: lhbrx */
-        INVALID,                /* 10 0 1101 */
-        { 2, ST+S },            /* 10 0 1110: sthbrx */
-        INVALID,                /* 10 0 1111 */
-        INVALID,                /* 10 1 0000 */
-        INVALID,                /* 10 1 0001 */
-        INVALID,                /* 10 1 0010 */
-        INVALID,                /* 10 1 0011 */
-        INVALID,                /* 10 1 0100 */
-        INVALID,                /* 10 1 0101 */
-        INVALID,                /* 10 1 0110 */
-        INVALID,                /* 10 1 0111 */
-        INVALID,                /* 10 1 1000 */
-        INVALID,                /* 10 1 1001 */
-        INVALID,                /* 10 1 1010 */
-        INVALID,                /* 10 1 1011 */
-        INVALID,                /* 10 1 1100 */
-        INVALID,                /* 10 1 1101 */
-        INVALID,                /* 10 1 1110 */
-        { 0, ST+HARD },         /* 10 1 1111: dcbz */
-        { 4, LD },              /* 11 0 0000: lwzx */
-        INVALID,                /* 11 0 0001 */
-        { 4, ST },              /* 11 0 0010: stwx */
-        INVALID,                /* 11 0 0011 */
-        { 2, LD },              /* 11 0 0100: lhzx */
-        { 2, LD+SE },           /* 11 0 0101: lhax */
-        { 2, ST },              /* 11 0 0110: sthx */
-        INVALID,                /* 11 0 0111 */
-        { 4, LD+F+S },          /* 11 0 1000: lfsx */
-        { 8, LD+F },            /* 11 0 1001: lfdx */
-        { 4, ST+F+S },          /* 11 0 1010: stfsx */
-        { 8, ST+F },            /* 11 0 1011: stfdx */
-        INVALID,                /* 11 0 1100 */
-        INVALID,                /* 11 0 1101: lmd */
-        INVALID,                /* 11 0 1110 */
-        INVALID,                /* 11 0 1111: stmd */
-        { 4, LD+U },            /* 11 1 0000: lwzux */
-        INVALID,                /* 11 1 0001 */
-        { 4, ST+U },            /* 11 1 0010: stwux */
-        INVALID,                /* 11 1 0011 */
-        { 2, LD+U },            /* 11 1 0100: lhzux */
-        { 2, LD+SE+U },         /* 11 1 0101: lhaux */
-        { 2, ST+U },            /* 11 1 0110: sthux */
-        INVALID,                /* 11 1 0111 */
-        { 4, LD+F+S+U },        /* 11 1 1000: lfsux */
-        { 8, LD+F+U },          /* 11 1 1001: lfdux */
-        { 4, ST+F+S+U },        /* 11 1 1010: stfsux */
-        { 8, ST+F+U },          /* 11 1 1011: stfdux */
-        INVALID,                /* 11 1 1100 */
-        INVALID,                /* 11 1 1101 */
-        INVALID,                /* 11 1 1110 */
-        INVALID,                /* 11 1 1111 */
-};
-#define SWAP(a, b)      (t = (a), (a) = (b), (b) = t)
-int
-fix_alignment(struct pt_regs *regs)
-{
-        int instr, nb, flags;
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-        int opcode, f1, f2, f3;
-#endif
-        int i, t;
-        int reg, areg;
-        int offset, nb0;
-        unsigned char __user *addr;
-        unsigned char *rptr;
-        union {
-                long l;
-                float f;
-                double d;
-                unsigned char v[8];
-        } data;
-        CHECK_FULL_REGS(regs);
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-        /* The 4xx-family & Book-E processors have no DSISR register,
-         * so we emulate it.
-         * The POWER4 has a DSISR register but doesn't set it on
-         * an alignment fault.  -- paulus
-         */
-        if (__get_user(instr, (unsigned int __user *) regs->nip))
-                return 0;
-        opcode = OPCD(instr);
-        reg = RS(instr);
-        areg = RA(instr);
-        if (!IS_XFORM(opcode)) {
-                f1 = 0;
-                f2 = (instr & 0x04000000) >> 26;
-                f3 = (instr & 0x78000000) >> 27;
-        } else {
-                f1 = (instr & 0x00000006) >> 1;
-                f2 = (instr & 0x00000040) >> 6;
-                f3 = (instr & 0x00000780) >> 7;
-        }
-        instr = ((f1 << 5) | (f2 << 4) | f3);
-#else
-        reg = (regs->dsisr >> 5) & 0x1f;        /* source/dest register */
-        areg = regs->dsisr & 0x1f;              /* register to update */
-        instr = (regs->dsisr >> 10) & 0x7f;
-#endif
-        nb = aligninfo[instr].len;
-        if (nb == 0) {
-                long __user *p;
-                int i;
-                if (instr != DCBZ)
-                        return 0;       /* too hard or invalid instruction */
-                /*
-                 * The dcbz (data cache block zero) instruction
-                 * gives an alignment fault if used on non-cacheable
-                 * memory.  We handle the fault mainly for the
-                 * case when we are running with the cache disabled
-                 * for debugging.
-                 */
-                p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
-                if (user_mode(regs)
-                    && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
-                        return -EFAULT;
-                for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
-                        if (__put_user(0, p+i))
-                                return -EFAULT;
-                return 1;
-        }
-        flags = aligninfo[instr].flags;
-        if ((flags & (LD|ST)) == 0)
-                return 0;
-        /* For the 4xx-family & Book-E processors, the 'dar' field of the
-         * pt_regs structure is overloaded and is really from the DEAR.
-         */
-        addr = (unsigned char __user *)regs->dar;
-        if (flags & M) {
-                /* lmw, stmw, lswi/x, stswi/x */
-                nb0 = 0;
-                if (flags & HARD) {
-                        if (flags & SX) {
-                                nb = regs->xer & 127;
-                                if (nb == 0)
-                                        return 1;
-                        } else {
-                                if (__get_user(instr,
-                                            (unsigned int __user *)regs->nip))
-                                        return 0;
-                                nb = (instr >> 11) & 0x1f;
-                                if (nb == 0)
-                                        nb = 32;
-                        }
-                        if (nb + reg * 4 > 128) {
-                                nb0 = nb + reg * 4 - 128;
-                                nb = 128 - reg * 4;
-                        }
-                } else {
-                        /* lwm, stmw */
-                        nb = (32 - reg) * 4;
-                }
-                if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
-                        return -EFAULT; /* bad address */
-                rptr = (unsigned char *) &regs->gpr[reg];
-                if (flags & LD) {
-                        for (i = 0; i < nb; ++i)
-                                if (__get_user(rptr[i], addr+i))
-                                        return -EFAULT;
-                        if (nb0 > 0) {
-                                rptr = (unsigned char *) &regs->gpr[0];
-                                addr += nb;
-                                for (i = 0; i < nb0; ++i)
-                                        if (__get_user(rptr[i], addr+i))
-                                                return -EFAULT;
-                        }
-                        for (; (i & 3) != 0; ++i)
-                                rptr[i] = 0;
-                } else {
-                        for (i = 0; i < nb; ++i)
-                                if (__put_user(rptr[i], addr+i))
-                                        return -EFAULT;
-                        if (nb0 > 0) {
-                                rptr = (unsigned char *) &regs->gpr[0];
-                                addr += nb;
-                                for (i = 0; i < nb0; ++i)
-                                        if (__put_user(rptr[i], addr+i))
-                                                return -EFAULT;
-                        }
-                }
-                return 1;
-        }
-        offset = 0;
-        if (nb < 4) {
-                /* read/write the least significant bits */
-                data.l = 0;
-                offset = 4 - nb;
-        }
-        /* Verify the address of the operand */
-        if (user_mode(regs)) {
-                if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
-                        return -EFAULT; /* bad address */
-        }
-        if (flags & F) {
-                preempt_disable();
-                if (regs->msr & MSR_FP)
-                        giveup_fpu(current);
-                preempt_enable();
-        }
-        /* If we read the operand, copy it in, else get register values */
-        if (flags & LD) {
-                for (i = 0; i < nb; ++i)
-                        if (__get_user(data.v[offset+i], addr+i))
-                                return -EFAULT;
-        } else if (flags & F) {
-                data.d = current->thread.fpr[reg];
-        } else {
-                data.l = regs->gpr[reg];
-        }
-        switch (flags & ~U) {
-        case LD+SE:     /* sign extend */
-                if (data.v[2] >= 0x80)
-                        data.v[0] = data.v[1] = -1;
-                break;
-        case LD+S:      /* byte-swap */
-        case ST+S:
-                if (nb == 2) {
-                        SWAP(data.v[2], data.v[3]);
-                } else {
-                        SWAP(data.v[0], data.v[3]);
-                        SWAP(data.v[1], data.v[2]);
-                }
-                break;
-        /* Single-precision FP load and store require conversions... */
-        case LD+F+S:
-#ifdef CONFIG_PPC_FPU
-                preempt_disable();
-                enable_kernel_fp();
-                cvt_fd(&data.f, &data.d, &current->thread);
-                preempt_enable();
-#else
-                return 0;
-#endif
-                break;
-        case ST+F+S:
-#ifdef CONFIG_PPC_FPU
-                preempt_disable();
-                enable_kernel_fp();
-                cvt_df(&data.d, &data.f, &current->thread);
-                preempt_enable();
-#else
-                return 0;
-#endif
-                break;
-        }
-        if (flags & ST) {
-                for (i = 0; i < nb; ++i)
-                        if (__put_user(data.v[offset+i], addr+i))
-                                return -EFAULT;
-        } else if (flags & F) {
-                current->thread.fpr[reg] = data.d;
-        } else {
-                regs->gpr[reg] = data.l;
-        }
-        if (flags & U)
-                regs->gpr[areg] = regs->dar;
-        return 1;
-}
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 48ed58f995c0..f7fae5f153b2 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i);
 static void pcibios_fixup_resources(struct pci_dev* dev);
 static void fixup_broken_pcnet32(struct pci_dev* dev);
 static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_rev1_53c810(struct pci_dev* dev);
 static void fixup_cpc710_pci64(struct pci_dev* dev);
 #ifdef CONFIG_PPC_OF
 static u8* pci_to_OF_bus_map;
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
index 7b26bcc5d10d..198a6a02cde8 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
@@ -25,6 +25,8 @@
 #define BCSR_ADDR               ((uint)0xf8000000)
 #define BCSR_SIZE               ((uint)(32 * 1024))
+struct seq_file;
 extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
 extern void mpc85xx_ads_init_IRQ(void) __init;
 extern void mpc85xx_ads_map_io(void) __init;
diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h
index 7bcc6c35a417..2f25b5195152 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.h
+++ b/arch/ppc/platforms/85xx/stx_gp3.h
@@ -21,7 +21,6 @@
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/seq_file.h>
 #include <asm/ppcboot.h>
 #define BOARD_CCSRBAR           ((uint)0xe0000000)
@@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init;
 extern void mpc85xx_restart(char *cmd);
 extern void mpc85xx_power_off(void);
 extern void mpc85xx_halt(void);
-extern int mpc85xx_show_cpuinfo(struct seq_file *m);
 extern void mpc85xx_init_IRQ(void) __init;
 extern unsigned long mpc85xx_find_end_of_memory(void) __init;
 extern void mpc85xx_calibrate_decr(void) __init;
diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c
index a1523989aff4..82cf3ab77f4a 100644
--- a/arch/ppc/syslib/mpc83xx_sys.c
+++ b/arch/ppc/syslib/mpc83xx_sys.c
@@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = {
                },
        },
        {
-                .ppc_sys_name   = "8343E",
+                .ppc_sys_name   = "8347E",
                .mask           = 0xFFFF0000,
                .value          = 0x80540000,
+                .num_devices    = 9,
+                .device_list    = (enum ppc_sys_devices[])
+                {
+                        MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+                        MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+                        MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+                },
+        },
+        {
+                .ppc_sys_name   = "8347",
+                .mask           = 0xFFFF0000,
+                .value          = 0x80550000,
+                .num_devices    = 8,
+                .device_list    = (enum ppc_sys_devices[])
+                {
+                        MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+                        MPC83xx_IIC2, MPC83xx_DUART,
+                        MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+                },
+        },
+        {
+                .ppc_sys_name   = "8343E",
+                .mask           = 0xFFFF0000,
+                .value          = 0x80560000,
                .num_devices    = 8,
                .device_list    = (enum ppc_sys_devices[])
                {
@@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
        {
                .ppc_sys_name   = "8343",
                .mask           = 0xFFFF0000,
-                .value          = 0x80550000,
+                .value          = 0x80570000,
                .num_devices    = 7,
                .device_list    = (enum ppc_sys_devices[])
                {
diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug
deleted file mode 100644
index b258c9314a1b..000000000000
--- a/arch/ppc64/Kconfig.debug
+++ /dev/null
@@ -1,65 +0,0 @@
-menu "Kernel hacking"
-source "lib/Kconfig.debug"
-config DEBUG_STACKOVERFLOW
-        bool "Check for stack overflows"
-        depends on DEBUG_KERNEL
-        help
-          This option will cause messages to be printed if free stack space
-          drops below a certain limit.
-config KPROBES
-        bool "Kprobes"
-        depends on DEBUG_KERNEL
-        help
-          Kprobes allows you to trap at almost any kernel address and
-          execute a callback function.  register_kprobe() establishes
-          a probepoint and specifies the callback.  Kprobes is useful
-          for kernel debugging, non-intrusive instrumentation and testing.
-          If in doubt, say "N".
-config DEBUG_STACK_USAGE
-        bool "Stack utilization instrumentation"
-        depends on DEBUG_KERNEL
-        help
-          Enables the display of the minimum amount of free stack which each
-          task has ever had available in the sysrq-T and sysrq-P debug output.
-          This option will slow down process creation somewhat.
-config DEBUGGER
-        bool "Enable debugger hooks"
-        depends on DEBUG_KERNEL
-        help
-          Include in-kernel hooks for kernel debuggers. Unless you are
-          intending to debug the kernel, say N here.
-config XMON
-        bool "Include xmon kernel debugger"
-        depends on DEBUGGER && !PPC_ISERIES
-        help
-          Include in-kernel hooks for the xmon kernel monitor/debugger.
-          Unless you are intending to debug the kernel, say N here.
-          Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
-          nothing will appear on the screen (xmon writes directly to the
-          framebuffer memory).
-          The cmdline option 'xmon' or 'xmon=early' will drop into xmon very
-          early during boot. 'xmon=on' will just enable the xmon debugger hooks.
-          'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set.
-config XMON_DEFAULT
-        bool "Enable xmon by default"
-        depends on XMON
-        help
-          xmon is normally disabled unless booted with 'xmon=on'.
-          Use 'xmon=off' to disable xmon init during runtime.
-config IRQSTACKS
-        bool "Use separate kernel stacks when processing interrupts"
-        help
-          If you say Y here the kernel will use separate kernel stacks
-          for handling hard and soft interrupts.  This can help avoid
-          overflowing the process kernel stacks.
-endmenu
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile
deleted file mode 100644
index a55a82d145d4..000000000000
--- a/arch/ppc64/Makefile
+++ /dev/null
@@ -1,142 +0,0 @@
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-# Adjusted for PPC64 by Tom Gall
-#
-KERNELLOAD      := 0xc000000000000000
-# Set default 32 bits cross compilers for vdso and boot wrapper
-CROSS32_COMPILE ?=
-CROSS32CC               := $(CROSS32_COMPILE)gcc
-CROSS32AS               := $(CROSS32_COMPILE)as
-CROSS32LD               := $(CROSS32_COMPILE)ld
-CROSS32OBJCOPY          := $(CROSS32_COMPILE)objcopy
-# If we have a biarch compiler, use it for 32 bits cross compile if
-# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit
-# target type to target compilers
-HAS_BIARCH      := $(call cc-option-yn, -m64)
-ifeq ($(HAS_BIARCH),y)
-ifeq ($(CROSS32_COMPILE),)
-CROSS32CC       := $(CC) -m32
-CROSS32AS       := $(AS) -a32
-CROSS32LD       := $(LD) -m elf32ppc
-CROSS32OBJCOPY  := $(OBJCOPY)
-endif
-override AS     += -a64
-override LD     += -m elf64ppc
-override CC     += -m64
-endif
-export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
-new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
-ifeq ($(new_nm),y)
-NM              := $(NM) --synthetic
-endif
-CHECKFLAGS      += -m64 -D__powerpc__ -D__powerpc64__
-LDFLAGS         := -m elf64ppc
-LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
-CFLAGS          += -msoft-float -pipe -mminimal-toc -mtraceback=none \
-                   -mcall-aixdesc
-# Temporary hack until we have migrated to asm-powerpc
-CPPFLAGS        += -Iarch/$(ARCH)/include
-GCC_VERSION     := $(call cc-version)
-GCC_BROKEN_VEC  := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
-ifeq ($(CONFIG_POWER4_ONLY),y)
-ifeq ($(CONFIG_ALTIVEC),y)
-ifeq ($(GCC_BROKEN_VEC),y)
-        CFLAGS += $(call cc-option,-mcpu=970)
-else
-        CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
-        CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
-        CFLAGS += $(call cc-option,-mtune=power4)
-endif
-# No AltiVec instruction when building kernel
-CFLAGS  += $(call cc-option, -mno-altivec)
-# Enable unit-at-a-time mode when possible. It shrinks the
-# kernel considerably.
-CFLAGS += $(call cc-option,-funit-at-a-time)
-head-y := arch/ppc64/kernel/head.o
-head-y += arch/powerpc/kernel/fpu.o
-head-y += arch/powerpc/kernel/entry_64.o
-core-y                          += arch/ppc64/kernel/ arch/powerpc/kernel/
-core-y                          += arch/powerpc/mm/
-core-y                          += arch/powerpc/sysdev/
-core-y                          += arch/powerpc/platforms/
-core-y                          += arch/powerpc/lib/
-core-$(CONFIG_XMON)             += arch/powerpc/xmon/
-drivers-$(CONFIG_OPROFILE)      += arch/powerpc/oprofile/
-boot := arch/ppc64/boot
-boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode
-boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm
-boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd
-$(boottargets-y): vmlinux
-        $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_PMAC) := vmlinux
-bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
-BOOTIMAGE := $(bootimage-y)
-install: vmlinux
-        $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-defaultimage-$(CONFIG_PPC_PSERIES) := zImage
-defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
-defaultimage-$(CONFIG_PPC_MAPLE) := zImage
-defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
-KBUILD_IMAGE := $(defaultimage-y)
-all: $(KBUILD_IMAGE)
-archclean:
-        $(Q)$(MAKE) $(clean)=$(boot)
-        # Temporary hack until we have migrated to asm-powerpc
-        $(Q)rm -rf arch/$(ARCH)/include
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
-        $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
-        $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-define archhelp
-  echo  '  zImage.vmode        - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)'
-  echo  '  zImage.initrd.vmode - Compressed kernel image with initrd attached,'
-  echo  '                        sourced from arch/$(ARCH)/boot/ramdisk.image.gz'
-  echo  '                        (arch/$(ARCH)/boot/zImage.initrd.vmode)'
-  echo  '  zImage              - zImage for pSeries machines'
-  echo  '  zImage.initrd       - zImage with initrd for pSeries machines'
-endef
diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig
deleted file mode 100644
index 67ffecbc05cb..000000000000
--- a/arch/ppc64/configs/bpa_defconfig
+++ /dev/null
@@ -1,1024 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:29:10 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-CONFIG_PPC_BPA=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-# CONFIG_IOMMU_VMERGE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=y
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=y
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=m
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
-# CONFIG_MV643XX_ETH is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_STALDRV is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-#
-# SN Devices
-#
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
-# CONFIG_XMON is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig
deleted file mode 100644
index 6323065fbf2c..000000000000
--- a/arch/ppc64/configs/g5_defconfig
+++ /dev/null
@@ -1,1392 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:23 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=y
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=y
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_SMU=y
-CONFIG_THERM_PM72=y
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-CONFIG_TIGON3=m
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=y
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_USB_MON=y
-#
-# USB port drivers
-#
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-#
-# USB DSL modem support
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-#
-# SN Devices
-#
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig
deleted file mode 100644
index 62e92c7e9e27..000000000000
--- a/arch/ppc64/configs/iSeries_defconfig
+++ /dev/null
@@ -1,998 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:56 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-#
-# Platform support
-#
-CONFIG_PPC_ISERIES=y
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_IBMVIO=y
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ISA_DMA_API=y
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=m
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_ISERIES_VETH=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-#
-# SN Devices
-#
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-#
-# iSeries device drivers
-#
-CONFIG_VIOCONS=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
-CONFIG_VIOPATH=y
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig
deleted file mode 100644
index 7b480f3d1406..000000000000
--- a/arch/ppc64/configs/maple_defconfig
+++ /dev/null
@@ -1,1062 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:31:24 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-# CONFIG_ALTIVEC is not set
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_MPIC_BROKEN_U3=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_IDE_TASK_IOCTL=y
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-CONFIG_I2C_AMD8111=y
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-#
-# USB port drivers
-#
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_TI=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-#
-# USB DSL modem support
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-#
-# SN Devices
-#
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-# CONFIG_IRQSTACKS is not set
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig
deleted file mode 100644
index 9f09dff9e11a..000000000000
--- a/arch/ppc64/configs/pSeries_defconfig
+++ /dev/null
@@ -1,1371 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:32:17 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CPUSETS=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=128
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_NUMA=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-#
-# Networking
-#
-CONFIG_NET=y
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_NETLINK=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=y
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBMVETH=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_2BUFF_MODE is not set
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_UINPUT is not set
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-CONFIG_HVC_CONSOLE=y
-CONFIG_HVCS=m
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HANGCHECK_TIMER is not set
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-#
-# Misc devices
-#
-#
-# Multimedia Capabilities Port drivers
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-#
-# USB DSL modem support
-#
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-#
-# InfiniBand support
-#
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
-#
-# SN Devices
-#
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-#
-# Hardware crypto devices
-#
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile
deleted file mode 100644
index e876c213f5ce..000000000000
--- a/arch/ppc64/kernel/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux ppc64 kernel.
-#
-obj-y               +=  idle.o align.o
-obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 573b6a97bb1f..70d8a6ec0920 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -514,8 +514,6 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr)
 static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
 {
-        int i;
        ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt");
        if (!pr)
@@ -524,8 +522,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
        if (!pr->pblk)
                return_VALUE(-ENODEV);
-        for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
+        memset(pr->power.states, 0, sizeof(pr->power.states));
-                memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
        /* if info is obtained from pblk/fadt, type equals state */
        pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@@ -555,13 +552,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
 static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr)
 {
-        int i;
        ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
-        for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
+        memset(pr->power.states, 0, sizeof(pr->power.states));
-                memset(&(pr->power.states[i]), 0,
-                       sizeof(struct acpi_processor_cx));
        /* if info is obtained from pblk/fadt, type equals state */
        pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@@ -873,7 +866,8 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr)
        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
                if (pr->power.states[i].valid) {
                        pr->power.count = i;
-                        pr->flags.power = 1;
+                        if (pr->power.states[i].type >= ACPI_STATE_C2)
+                                pr->flags.power = 1;
                }
        }
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index ea89dca3dbb5..01a1f6badb53 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2203,7 +2203,7 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
 static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
 {
-        if (smi_info->thread != ERR_PTR(-ENOMEM))
+        if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
                kthread_stop(smi_info->thread);
        del_timer_sync(&smi_info->si_timer);
 }
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index b58adfe3ed19..a6873bf89ffa 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -6,7 +6,7 @@ menu "TPM devices"
 config TCG_TPM
        tristate "TPM Hardware Support"
-        depends on EXPERIMENTAL && PCI
+        depends on EXPERIMENTAL
        ---help---
          If you have a TPM security chip in your system, which
          implements the Trusted Computing Group's specification,
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 0b283d246730..a9be0e8eaea5 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -377,6 +377,7 @@ int tpm_release(struct inode *inode, struct file *file)
        file->private_data = NULL;
        chip->num_opens--;
        del_singleshot_timer_sync(&chip->user_read_timer);
+        flush_scheduled_work();
        atomic_set(&chip->data_pending, 0);
        put_device(chip->dev);
        kfree(chip->data_buffer);
@@ -428,6 +429,7 @@ ssize_t tpm_read(struct file * file, char __user *buf,
        int ret_size;
        del_singleshot_timer_sync(&chip->user_read_timer);
+        flush_scheduled_work();
        ret_size = atomic_read(&chip->data_pending);
        atomic_set(&chip->data_pending, 0);
        if (ret_size > 0) {     /* relay data */
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index deb4b5c80914..ff3654964fe3 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -47,13 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
                return -EIO;
        for (i = 0; i < 6; i++) {
-                status = atmel_getb(chip, 1);
+                status = ioread8(chip->vendor->iobase + 1);
                if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
-                        dev_err(chip->dev,
+                        dev_err(chip->dev, "error reading header\n");
-                                "error reading header\n");
                        return -EIO;
                }
-                *buf++ = atmel_getb(chip, 0);
+                *buf++ = ioread8(chip->vendor->iobase);
        }
        /* size of the data received */
@@ -64,10 +63,9 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
                dev_err(chip->dev,
                        "Recv size(%d) less than available space\n", size);
                for (; i < size; i++) { /* clear the waiting data anyway */
-                        status = atmel_getb(chip, 1);
+                        status = ioread8(chip->vendor->iobase + 1);
                        if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
-                                dev_err(chip->dev,
+                                dev_err(chip->dev, "error reading data\n");
-                                        "error reading data\n");
                                return -EIO;
                        }
                }
@@ -76,17 +74,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
        /* read all the data available */
        for (; i < size; i++) {
-                status = atmel_getb(chip, 1);
+                status = ioread8(chip->vendor->iobase + 1);
                if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
-                        dev_err(chip->dev,
+                        dev_err(chip->dev, "error reading data\n");
-                                "error reading data\n");
                        return -EIO;
                }
-                *buf++ = atmel_getb(chip, 0);
+                *buf++ = ioread8(chip->vendor->iobase);
        }
        /* make sure data available is gone */
-        status = atmel_getb(chip, 1);
+        status = ioread8(chip->vendor->iobase + 1);
        if (status & ATML_STATUS_DATA_AVAIL) {
                dev_err(chip->dev, "data available is stuck\n");
                return -EIO;
@@ -102,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
        dev_dbg(chip->dev, "tpm_atml_send:\n");
        for (i = 0; i < count; i++) {
                dev_dbg(chip->dev, "%d 0x%x(%d)\n",  i, buf[i], buf[i]);
-                atmel_putb(buf[i], chip, 0);
+                iowrite8(buf[i], chip->vendor->iobase);
        }
        return count;
@@ -110,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
 static void tpm_atml_cancel(struct tpm_chip *chip)
 {
-        atmel_putb(ATML_STATUS_ABORT, chip, 1);
+        iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1);
 }
 static u8 tpm_atml_status(struct tpm_chip *chip)
 {
-        return atmel_getb(chip, 1);
+        return ioread8(chip->vendor->iobase + 1);
 }
 static struct file_operations atmel_ops = {
@@ -162,7 +160,8 @@ static void atml_plat_remove(void)
        if (chip) {
                if (chip->vendor->have_region)
-                        atmel_release_region(chip->vendor->base, chip->vendor->region_size);
+                        atmel_release_region(chip->vendor->base,
+                                             chip->vendor->region_size);
                atmel_put_base_addr(chip->vendor);
                tpm_remove_hardware(chip->dev);
                platform_device_unregister(pdev);
@@ -183,14 +182,19 @@ static int __init init_atmel(void)
        driver_register(&atml_drv);
-        if (atmel_get_base_addr(&tpm_atmel) != 0) {
+        if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) {
                rc = -ENODEV;
                goto err_unreg_drv;
        }
-        tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1;
+        tpm_atmel.have_region =
+            (atmel_request_region
+             (tpm_atmel.base, tpm_atmel.region_size,
+              "tpm_atmel0") == NULL) ? 0 : 1;
-        if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) {
+        if (IS_ERR
+            (pdev =
+             platform_device_register_simple("tpm_atmel", -1, NULL, 0))) {
                rc = PTR_ERR(pdev);
                goto err_rel_reg;
        }
@@ -202,9 +206,10 @@ static int __init init_atmel(void)
 err_unreg_dev:
        platform_device_unregister(pdev);
 err_rel_reg:
-        if (tpm_atmel.have_region)
-                atmel_release_region(tpm_atmel.base, tpm_atmel.region_size);
        atmel_put_base_addr(&tpm_atmel);
+        if (tpm_atmel.have_region)
+                atmel_release_region(tpm_atmel.base,
+                                     tpm_atmel.region_size);
 err_unreg_drv:
        driver_unregister(&atml_drv);
        return rc;
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index 3c5b9a8d1c49..d3478aaadd77 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -27,12 +27,14 @@
 #define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset)
 #define atmel_request_region request_mem_region
 #define atmel_release_region release_mem_region
-static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+static inline void atmel_put_base_addr(struct tpm_vendor_specific
+                                         *vendor)
 {
        iounmap(vendor->iobase);
 }
-static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
+static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
 {
        struct device_node *dn;
        unsigned long address, size;
@@ -44,11 +46,11 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
        dn = of_find_node_by_name(NULL, "tpm");
        if (!dn)
-                return 1;
+                return NULL;
        if (!device_is_compatible(dn, "AT97SC3201")) {
                of_node_put(dn);
-                return 1;
+                return NULL;
        }
        reg = (unsigned int *) get_property(dn, "reg", &reglen);
@@ -71,8 +73,7 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
        vendor->base = address;
        vendor->region_size = size;
-        vendor->iobase = ioremap(address, size);
+        return ioremap(vendor->base, vendor->region_size);
-        return 0;
 }
 #else
 #define atmel_getb(chip, offset) inb(chip->vendor->base + offset)
@@ -105,18 +106,19 @@ static int atmel_verify_tpm11(void)
        return 0;
 }
-static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
+static inline void atmel_put_base_addr(struct tpm_vendor_specific
+                                         *vendor)
 {
 }
 /* Determine where to talk to device */
-static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
+static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
                                         *vendor)
 {
        int lo, hi;
        if (atmel_verify_tpm11() != 0)
-                return 1;
+                return NULL;
        lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
        hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
@@ -124,6 +126,6 @@ static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
        vendor->base = (hi << 8) | lo;
        vendor->region_size = 2;
-        return 0;
+        return ioport_map(vendor->base, vendor->region_size);
 }
 #endif
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 51315302a85e..252d55df9642 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -326,9 +326,9 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait)
                }
        }
-        ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE);
+        ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE);
        if (!ret)
-                ret = page->mapping->a_ops->commit_write(NULL, page, 0,
+                ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0,
                        PAGE_SIZE);
        if (ret) {
                unlock_page(page);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index f3fed662f32e..78c7418478d6 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3846,11 +3846,20 @@ static int is_mddev_idle(mddev_t *mddev)
                curr_events = disk_stat_read(disk, sectors[0]) + 
                                disk_stat_read(disk, sectors[1]) - 
                                atomic_read(&disk->sync_io);
-                /* Allow some slack between valud of curr_events and last_events,
+                /* The difference between curr_events and last_events
-                 * as there are some uninteresting races.
+                 * will be affected by any new non-sync IO (making
+                 * curr_events bigger) and any difference in the amount of
+                 * in-flight syncio (making current_events bigger or smaller)
+                 * The amount in-flight is currently limited to
+                 * 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6
+                 * which is at most 4096 sectors.
+                 * These numbers are fairly fragile and should be made
+                 * more robust, probably by enforcing the
+                 * 'window size' that md_do_sync sort-of uses.
+                 *
                 * Note: the following is an unsigned comparison.
                 */
-                if ((curr_events - rdev->last_events + 32) > 64) {
+                if ((curr_events - rdev->last_events + 4096) > 8192) {
                        rdev->last_events = curr_events;
                        idle = 0;
                }
@@ -4109,7 +4118,7 @@ static void md_do_sync(mddev_t *mddev)
                if (currspeed > sysctl_speed_limit_min) {
                        if ((currspeed > sysctl_speed_limit_max) ||
                                        !is_mddev_idle(mddev)) {
-                                msleep(250);
+                                msleep(500);
                                goto repeat;
                        }
                }
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 332e9953c55c..cd0b1dccfb61 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -32,6 +32,7 @@
 * 
 */
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 7a6aeae2c9fa..22cd04556707 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -156,7 +156,7 @@
 #define DRV_NAME                "e100"
 #define DRV_EXT         "-NAPI"
-#define DRV_VERSION             "3.4.14-k2"DRV_EXT
+#define DRV_VERSION             "3.4.14-k4"DRV_EXT
 #define DRV_DESCRIPTION         "Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT           "Copyright(c) 1999-2005 Intel Corporation"
 #define PFX                     DRV_NAME ": "
@@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
 static void e100_get_defaults(struct nic *nic)
 {
-        struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
+        struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
-        struct param_range cbs  = { .min = 64, .max = 256, .count = 64 };
+        struct param_range cbs  = { .min = 64, .max = 256, .count = 128 };
        pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
        /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1007,25 +1007,264 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
                c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
 }
+/********************************************************/
+/*  Micro code for 8086:1229 Rev 8                      */
+/********************************************************/
+/*  Parameter values for the D101M B-step  */
+#define D101M_CPUSAVER_TIMER_DWORD              78
+#define D101M_CPUSAVER_BUNDLE_DWORD             65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD           126
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+/********************************************************/
+/*  Micro code for 8086:1229 Rev 9                      */
+/********************************************************/
+/*  Parameter values for the D101S  */
+#define D101S_CPUSAVER_TIMER_DWORD              78
+#define D101S_CPUSAVER_BUNDLE_DWORD             67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD           128
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700  \
+}
+/********************************************************/
+/*  Micro code for the 8086:1229 Rev F/10               */
+/********************************************************/
+/*  Parameter values for the D102 E-step  */
+#define D102_E_CPUSAVER_TIMER_DWORD             42
+#define D102_E_CPUSAVER_BUNDLE_DWORD            54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD          46
+#define     D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
 static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
-        int i;
+/* *INDENT-OFF* */
-        static const u32 ucode[UCODE_SIZE] = {
+        static struct {
-                /* NFS packets are misinterpreted as TCO packets and
+                u32 ucode[UCODE_SIZE + 1];
-                 * incorrectly routed to the BMC over SMBus.  This
+                u8 mac;
-                 * microcode patch checks the fragmented IP bit in the
+                u8 timer_dword;
-                 * NFS/UDP header to distinguish between NFS and TCO. */
+                u8 bundle_dword;
-                0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
+                u8 min_size_dword;
-                0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
+        } ucode_opts[] = {
-                0x00906EFD, 0x00900EFD, 0x00E00EF8,
+                { D101M_B_RCVBUNDLE_UCODE,
-        };
+                  mac_82559_D101M,
+                  D101M_CPUSAVER_TIMER_DWORD,
-        if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
+                  D101M_CPUSAVER_BUNDLE_DWORD,
-                for(i = 0; i < UCODE_SIZE; i++)
+                  D101M_CPUSAVER_MIN_SIZE_DWORD },
+                { D101S_RCVBUNDLE_UCODE,
+                  mac_82559_D101S,
+                  D101S_CPUSAVER_TIMER_DWORD,
+                  D101S_CPUSAVER_BUNDLE_DWORD,
+                  D101S_CPUSAVER_MIN_SIZE_DWORD },
+                { D102_E_RCVBUNDLE_UCODE,
+                  mac_82551_F,
+                  D102_E_CPUSAVER_TIMER_DWORD,
+                  D102_E_CPUSAVER_BUNDLE_DWORD,
+                  D102_E_CPUSAVER_MIN_SIZE_DWORD },
+                { D102_E_RCVBUNDLE_UCODE,
+                  mac_82551_10,
+                  D102_E_CPUSAVER_TIMER_DWORD,
+                  D102_E_CPUSAVER_BUNDLE_DWORD,
+                  D102_E_CPUSAVER_MIN_SIZE_DWORD },
+                { {0}, 0, 0, 0, 0}
+        }, *opts;
+/* *INDENT-ON* */
+/*************************************************************************
+*  CPUSaver parameters
+*
+*  All CPUSaver parameters are 16-bit literals that are part of a
+*  "move immediate value" instruction.  By changing the value of
+*  the literal in the instruction before the code is loaded, the
+*  driver can change the algorithm.
+*
+*  INTDELAY - This loads the dead-man timer with its inital value.
+*    When this timer expires the interrupt is asserted, and the 
+*    timer is reset each time a new packet is received.  (see
+*    BUNDLEMAX below to set the limit on number of chained packets)
+*    The current default is 0x600 or 1536.  Experiments show that
+*    the value should probably stay within the 0x200 - 0x1000.
+*
+*  BUNDLEMAX - 
+*    This sets the maximum number of frames that will be bundled.  In
+*    some situations, such as the TCP windowing algorithm, it may be
+*    better to limit the growth of the bundle size than let it go as
+*    high as it can, because that could cause too much added latency.
+*    The default is six, because this is the number of packets in the
+*    default TCP window size.  A value of 1 would make CPUSaver indicate
+*    an interrupt for every frame received.  If you do not want to put
+*    a limit on the bundle size, set this value to xFFFF.
+*
+*  BUNDLESMALL - 
+*    This contains a bit-mask describing the minimum size frame that
+*    will be bundled.  The default masks the lower 7 bits, which means
+*    that any frame less than 128 bytes in length will not be bundled,
+*    but will instead immediately generate an interrupt.  This does
+*    not affect the current bundle in any way.  Any frame that is 128
+*    bytes or large will be bundled normally.  This feature is meant
+*    to provide immediate indication of ACK frames in a TCP environment.
+*    Customers were seeing poor performance when a machine with CPUSaver
+*    enabled was sending but not receiving.  The delay introduced when
+*    the ACKs were received was enough to reduce total throughput, because
+*    the sender would sit idle until the ACK was finally seen.
+*
+*    The current default is 0xFF80, which masks out the lower 7 bits.
+*    This means that any frame which is x7F (127) bytes or smaller
+*    will cause an immediate interrupt.  Because this value must be a 
+*    bit mask, there are only a few valid values that can be used.  To
+*    turn this feature off, the driver can write the value xFFFF to the
+*    lower word of this instruction (in the same way that the other
+*    parameters are used).  Likewise, a value of 0xF800 (2047) would
+*    cause an interrupt to be generated for every frame, because all
+*    standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+/* if you wish to disable the ucode functionality, while maintaining the 
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+        /* do not load u-code for ICH devices */
+        if (nic->flags & ich)
+                goto noloaducode;
+        /* Search for ucode match against h/w rev_id */
+        for (opts = ucode_opts; opts->mac; opts++) {
+                int i;
+                u32 *ucode = opts->ucode;
+                if (nic->mac != opts->mac)
+                        continue;
+                /* Insert user-tunable settings */
+                ucode[opts->timer_dword] &= 0xFFFF0000;
+                ucode[opts->timer_dword] |= INTDELAY;
+                ucode[opts->bundle_dword] &= 0xFFFF0000;
+                ucode[opts->bundle_dword] |= BUNDLEMAX;
+                ucode[opts->min_size_dword] &= 0xFFFF0000;
+                ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
+                for (i = 0; i < UCODE_SIZE; i++)
                        cb->u.ucode[i] = cpu_to_le32(ucode[i]);
                cb->command = cpu_to_le16(cb_ucode);
-        } else
+                return;
-                cb->command = cpu_to_le16(cb_nop);
+        }
+noloaducode:
+        cb->command = cpu_to_le16(cb_nop);
 }
 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig
index 94e7a9af8705..a84c232395e3 100644
--- a/drivers/net/fec_8xx/Kconfig
+++ b/drivers/net/fec_8xx/Kconfig
@@ -1,6 +1,6 @@
 config FEC_8XX
        tristate "Motorola 8xx FEC driver"
-        depends on NET_ETHERNET && FEC
+        depends on NET_ETHERNET && 8xx
        select MII
 config FEC_8XX_GENERIC_PHY
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 6a3129bc15a6..9b8295ee06ef 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1360,7 +1360,7 @@ static struct pci_driver ioc3_driver = {
 static int __init ioc3_init_module(void)
 {
-        return pci_module_init(&ioc3_driver);
+        return pci_register_driver(&ioc3_driver);
 }
 static void __exit ioc3_cleanup_module(void)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 159b56a56ef4..14a76f7cf900 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1346,10 +1346,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
        } else {
                if (netif_msg_probe(tp)) {
                        printk(KERN_ERR PFX
-                               "Cannot find PowerManagement capability. "
+                               "PowerManagement capability not found.\n");
-                               "Aborting.\n");
                }
-                goto err_out_mwi;
        }
        /* make sure PCI base addr 1 is MMIO */
@@ -2516,7 +2514,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
        } while (boguscnt > 0);
        if (boguscnt <= 0) {
-                if (net_ratelimit() && netif_msg_intr(tp)) {
+                if (netif_msg_intr(tp) && net_ratelimit() ) {
                        printk(KERN_WARNING
                               "%s: Too much work at interrupt!\n", dev->name);
                }
diff --git a/drivers/net/saa9730.h b/drivers/net/saa9730.h
index 9e9da6b4080f..a7e9d29a86a7 100644
--- a/drivers/net/saa9730.h
+++ b/drivers/net/saa9730.h
@@ -1,6 +1,7 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 2005  MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *      Authors: Carsten Langgaard <carstenl@mips.com>
+ *               Maciej W. Rozycki <macro@mips.com>
 *
 * ########################################################################
 *
@@ -265,6 +266,7 @@
 /* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
 #define SAA9730_LAN_REGS_ADDR   0x20400
+#define SAA9730_LAN_REGS_SIZE   0x00400
 struct lan_saa9730_regmap {
        volatile unsigned int TxBuffA;                  /* 0x20400 */
@@ -309,6 +311,7 @@ typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
 /* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
 #define SAA9730_EVM_REGS_ADDR   0x02000
+#define SAA9730_EVM_REGS_SIZE   0x00400
 struct evm_saa9730_regmap {
        volatile unsigned int InterruptStatus1;         /* 0x2000 */
@@ -329,16 +332,32 @@ typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
 struct lan_saa9730_private {
+        /*
+         * Rx/Tx packet buffers.
+         * The Rx and Tx packets must be PACKET_SIZE aligned.
+         */
+        void            *buffer_start;
+        unsigned int    buffer_size;
+        /*
+         * DMA address of beginning of this object, returned
+         * by pci_alloc_consistent().
+         */
+        dma_addr_t      dma_addr;
+        /* Pointer to the associated pci device structure */
+        struct pci_dev  *pci_dev;
        /* Pointer for the SAA9730 LAN controller register set. */
        t_lan_saa9730_regmap *lan_saa9730_regs;
        /* Pointer to the SAA9730 EVM register. */
        t_evm_saa9730_regmap *evm_saa9730_regs;
-        /* TRUE if the next buffer to write is RxBuffA,  FALSE if RxBuffB. */
-        unsigned char NextRcvToUseIsA;
        /* Rcv buffer Index. */
        unsigned char NextRcvPacketIndex;
+        /* Next buffer index. */
+        unsigned char NextRcvBufferIndex;
        /* Index of next packet to use in that buffer. */
        unsigned char NextTxmPacketIndex;
@@ -353,13 +372,8 @@ struct lan_saa9730_private {
        unsigned char DmaRcvPackets;
        unsigned char DmaTxmPackets;
-        unsigned char RcvAIndex;        /* index into RcvBufferSpace[] for Blk A */
+        void          *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
-        unsigned char RcvBIndex;        /* index into RcvBufferSpace[] for Blk B */
+        void          *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
-        unsigned int
-            TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
-        unsigned int
-            RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
        unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
        unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index c91e2e81f131..28bf2e69eb5e 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -155,6 +155,12 @@ MODULE_LICENSE("GPL");
 #define MEMORY_WAIT_TIME        16
 /*
+ * The maximum number of processing loops allowed for each call to the
+ * IRQ handler.  
+ */
+#define MAX_IRQ_LOOPS           8
+/*
 * This selects whether TX packets are sent one by one to the SMC91x internal
 * memory and throttled until transmission completes.  This may prevent
 * RX overruns a litle by keeping much of the memory free for RX packets
@@ -684,7 +690,6 @@ static void smc_hardware_send_pkt(unsigned long data)
        /* queue the packet for TX */
        SMC_SET_MMU_CMD(MC_ENQUEUE);
-        SMC_ACK_INT(IM_TX_EMPTY_INT);
        smc_special_unlock(&lp->lock);
        dev->trans_start = jiffies;
@@ -1207,6 +1212,7 @@ static void smc_phy_configure(void *data)
        smc_phy_check_media(dev, 1);
 smc_phy_configure_exit:
+        SMC_SELECT_BANK(2);
        spin_unlock_irq(&lp->lock);
        lp->work_pending = 0;
 }
@@ -1305,7 +1311,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
        SMC_SET_INT_MASK(0);
        /* set a timeout value, so I don't stay here forever */
-        timeout = 8;
+        timeout = MAX_IRQ_LOOPS;
        do {
                status = SMC_GET_INT();
@@ -1372,10 +1378,13 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
        /* restore register states */
        SMC_SET_PTR(saved_pointer);
        SMC_SET_INT_MASK(mask);
        spin_unlock(&lp->lock);
-        DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout);
+        if (timeout == MAX_IRQ_LOOPS)
+                PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
+                       dev->name, mask);
+        DBG(3, "%s: Interrupt done (%d loops)\n",
+               dev->name, MAX_IRQ_LOOPS - timeout);
        /*
         * We return IRQ_HANDLED unconditionally here even if there was
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a01efa6d5c62..1fd04662c4fc 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -192,7 +192,9 @@ static int cisco_rx(struct sk_buff *skb)
                                               "uptime %ud%uh%um%us)\n",
                                               dev->name, days, hrs,
                                               min, sec);
+#if 0
                                        netif_carrier_on(dev);
+#endif
                                        hdlc->state.cisco.up = 1;
                                }
                        }
@@ -225,7 +227,9 @@ static void cisco_timer(unsigned long arg)
                       hdlc->state.cisco.settings.timeout * HZ)) {
                hdlc->state.cisco.up = 0;
                printk(KERN_INFO "%s: Link down\n", dev->name);
+#if 0
                netif_carrier_off(dev);
+#endif
        }
        cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@@ -261,8 +265,10 @@ static void cisco_stop(struct net_device *dev)
 {
        hdlc_device *hdlc = dev_to_hdlc(dev);
        del_timer_sync(&hdlc->state.cisco.timer);
+#if 0
        if (netif_carrier_ok(dev))
                netif_carrier_off(dev);
+#endif
        hdlc->state.cisco.up = 0;
        hdlc->state.cisco.request_sent = 0;
 }
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index e1601d35dced..523afe17564e 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -545,8 +545,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
        hdlc->state.fr.reliable = reliable;
        if (reliable) {
+#if 0
                if (!netif_carrier_ok(dev))
                        netif_carrier_on(dev);
+#endif
                hdlc->state.fr.n391cnt = 0; /* Request full status */
                hdlc->state.fr.dce_changed = 1;
@@ -560,8 +562,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
                        }
                }
        } else {
+#if 0
                if (netif_carrier_ok(dev))
                        netif_carrier_off(dev);
+#endif
                while (pvc) {           /* Deactivate all PVCs */
                        pvc_carrier(0, pvc);
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index cdd4c09c2d90..46cef8f92133 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -79,11 +79,13 @@ static void __hdlc_set_carrier_on(struct net_device *dev)
        hdlc_device *hdlc = dev_to_hdlc(dev);
        if (hdlc->proto.start)
                return hdlc->proto.start(dev);
+#if 0
 #ifdef DEBUG_LINK
        if (netif_carrier_ok(dev))
                printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
 #endif
        netif_carrier_on(dev);
+#endif
 }
@@ -94,11 +96,13 @@ static void __hdlc_set_carrier_off(struct net_device *dev)
        if (hdlc->proto.stop)
                return hdlc->proto.stop(dev);
+#if 0
 #ifdef DEBUG_LINK
        if (!netif_carrier_ok(dev))
                printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
 #endif
        netif_carrier_off(dev);
+#endif
 }
@@ -294,8 +298,10 @@ int register_hdlc_device(struct net_device *dev)
        if (result != 0)
                return -EIO;
+#if 0
        if (netif_carrier_ok(dev))
                netif_carrier_off(dev); /* no carrier until DCD goes up */
+#endif
        return 0;
 }
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index 579480dad374..346c6febb033 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -398,7 +398,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
 *
 * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
 */
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
                     u16 id, u16 offset)
 {
        int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -424,7 +424,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
 *
 * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
 */
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
                      u16 id, u16 offset)
 {
        int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -450,7 +450,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
 *
 * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
 */
-int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len,
                      u16 id, u16 offset)
 {
        int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
index a6bd472d75d4..7644f72a9f4e 100644
--- a/drivers/net/wireless/hermes.h
+++ b/drivers/net/wireless/hermes.h
@@ -372,12 +372,12 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
                      struct hermes_response *resp);
 int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
                       u16 id, u16 offset);
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
                        u16 id, u16 offset);
 int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
-                        unsigned data_len, unsigned len, u16 id, u16 offset);
+                        unsigned data_len, int len, u16 id, u16 offset);
 int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
                    u16 *length, void *buf);
 int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h
index 33acb8add4d6..afac5c7a323d 100644
--- a/drivers/net/wireless/i82593.h
+++ b/drivers/net/wireless/i82593.h
@@ -7,11 +7,16 @@
 *
 * Copyright 1994, Anders Klemets <klemets@it.kth.se>
 *
- * This software may be freely distributed for noncommercial purposes
- * as long as this notice is retained.
- * 
 * HISTORY
 * i82593.h,v
+ * Revision 1.4  2005/11/4  09:15:00  baroniunas
+ * Modified copyright with permission of author as follows:
+ *
+ *   "If I82539.H is the only file with my copyright statement
+ *    that is included in the Source Forge project, then you have
+ *    my approval to change the copyright statement to be a GPL
+ *    license, in the way you proposed on October 10."
+ *
 * Revision 1.1  1996/07/17 15:23:12  root
 * Initial revision
 *
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index a2e6214169e9..77d2a21d4cd0 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6344,7 +6344,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
        dev->ethtool_ops = &ipw2100_ethtool_ops;
        dev->tx_timeout = ipw2100_tx_timeout;
        dev->wireless_handlers = &ipw2100_wx_handler_def;
-        dev->get_wireless_stats = ipw2100_wx_wireless_stats;
+        priv->wireless_data.ieee80211 = priv->ieee;
+        dev->wireless_data = &priv->wireless_data;
        dev->set_mac_address = ipw2100_set_address;
        dev->watchdog_timeo = 3 * HZ;
        dev->irq = 0;
@@ -7178,6 +7179,11 @@ static int ipw2100_wx_get_range(struct net_device *dev,
        }
        range->num_frequency = val;
+        /* Event capability (kernel + driver) */
+        range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
+                                IW_EVENT_CAPA_MASK(SIOCGIWAP));
+        range->event_capa[1] = IW_EVENT_CAPA_K_1;
        IPW_DEBUG_WX("GET Range\n");
        return 0;
@@ -8446,16 +8452,6 @@ static iw_handler ipw2100_private_handler[] = {
 #endif                          /* CONFIG_IPW2100_MONITOR */
 };
-static struct iw_handler_def ipw2100_wx_handler_def = {
-        .standard = ipw2100_wx_handlers,
-        .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
-        .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
-        .num_private_args = sizeof(ipw2100_private_args) /
-            sizeof(struct iw_priv_args),
-        .private = (iw_handler *) ipw2100_private_handler,
-        .private_args = (struct iw_priv_args *)ipw2100_private_args,
-};
 /*
 * Get wireless statistics.
 * Called by /proc/net/wireless
@@ -8597,6 +8593,17 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
        return (struct iw_statistics *)NULL;
 }
+static struct iw_handler_def ipw2100_wx_handler_def = {
+        .standard = ipw2100_wx_handlers,
+        .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
+        .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
+        .num_private_args = sizeof(ipw2100_private_args) /
+            sizeof(struct iw_priv_args),
+        .private = (iw_handler *) ipw2100_private_handler,
+        .private_args = (struct iw_priv_args *)ipw2100_private_args,
+        .get_wireless_stats = ipw2100_wx_wireless_stats,
+};
 static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
 {
        union iwreq_data wrqu;
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
index 140fdf2a0a09..7c65b10bb164 100644
--- a/drivers/net/wireless/ipw2100.h
+++ b/drivers/net/wireless/ipw2100.h
@@ -571,6 +571,8 @@ struct ipw2100_priv {
        struct net_device *net_dev;
        struct iw_statistics wstats;
+        struct iw_public_data wireless_data;
        struct tasklet_struct irq_tasklet;
        struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c
index 109a96d90007..23deee69974b 100644
--- a/drivers/net/wireless/prism54/isl_38xx.c
+++ b/drivers/net/wireless/prism54/isl_38xx.c
@@ -164,12 +164,12 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
                /* assert the Wakeup interrupt in the Device Interrupt Register */
                isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
                                  ISL38XX_DEV_INT_REG);
+#if VERBOSE > SHOW_ERROR_MESSAGES
                udelay(ISL38XX_WRITEIO_DELAY);
                /* perform another read on the Device Status Register */
                reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-#if VERBOSE > SHOW_ERROR_MESSAGES
                do_gettimeofday(&current_time);
                DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
                      current_time.tv_sec, (long)current_time.tv_usec, reg);
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index f5b7d360fc10..1026f2bc3185 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -1179,12 +1179,12 @@ raw3270_create_attributes(struct raw3270 *rp)
        //FIXME: check return code
        sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
        rp->clttydev =
-                class_device_create(class3270,
+                class_device_create(class3270, NULL,
                                    MKDEV(IBM_TTY3270_MAJOR, rp->minor),
                                    &rp->cdev->dev, "tty%s",
                                    rp->cdev->dev.bus_id);
        rp->cltubdev =
-                class_device_create(class3270,
+                class_device_create(class3270, NULL,
                                    MKDEV(IBM_FS3270_MAJOR, rp->minor),
                                    &rp->cdev->dev, "tub%s",
                                    rp->cdev->dev.bus_id);
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ac184e60797e..ab7432a5778e 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -2,6 +2,7 @@
 * sata_mv.c - Marvell SATA support
 *
 * Copyright 2005: EMC Corporation, all rights reserved.
+ * Copyright 2005 Red Hat, Inc.  All rights reserved.
 *
 * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
 *
@@ -36,7 +37,7 @@
 #include <asm/io.h>
 #define DRV_NAME        "sata_mv"
-#define DRV_VERSION     "0.25"
+#define DRV_VERSION     "0.5"
 enum {
        /* BAR's are enumerated in terms of pci_resource_start() terms */
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index cb1933a3bd55..e0d6f194f54f 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -5,17 +5,6 @@
 *
 * Based on preview driver from Silicon Image.
 *
- * NOTE: No NCQ/ATAPI support yet.  The preview driver didn't support
- * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
- * those work.  Enabling those shouldn't be difficult.  Basic
- * structure is all there (in libata-dev tree).  If you have any
- * information about this hardware, please contact me or linux-ide.
- * Info is needed on...
- *
- * - How to issue tagged commands and turn on sactive on issue accordingly.
- * - Where to put an ATAPI command and how to tell the device to send it.
- * - How to enable/use 64bit.
- *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
@@ -42,7 +31,7 @@
 #include <asm/io.h>
 #define DRV_NAME        "sata_sil24"
-#define DRV_VERSION     "0.22"  /* Silicon Image's preview driver was 0.10 */
+#define DRV_VERSION     "0.23"
 /*
 * Port request block (PRB) 32 bytes
@@ -221,11 +210,22 @@ enum {
        IRQ_STAT_4PORTS         = 0xf,
 };
-struct sil24_cmd_block {
+struct sil24_ata_block {
        struct sil24_prb prb;
        struct sil24_sge sge[LIBATA_MAX_PRD];
 };
+struct sil24_atapi_block {
+        struct sil24_prb prb;
+        u8 cdb[16];
+        struct sil24_sge sge[LIBATA_MAX_PRD - 1];
+};
+union sil24_cmd_block {
+        struct sil24_ata_block ata;
+        struct sil24_atapi_block atapi;
+};
 /*
 * ap->private_data
 *
@@ -233,7 +233,7 @@ struct sil24_cmd_block {
 * here from the previous interrupt.
 */
 struct sil24_port_priv {
-        struct sil24_cmd_block *cmd_block;      /* 32 cmd blocks */
+        union sil24_cmd_block *cmd_block;       /* 32 cmd blocks */
        dma_addr_t cmd_block_dma;               /* DMA base addr for them */
        struct ata_taskfile tf;                 /* Cached taskfile registers */
 };
@@ -244,6 +244,7 @@ struct sil24_host_priv {
        void __iomem *port_base;        /* port registers (4 * 8192 bytes @BAR2) */
 };
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
 static u8 sil24_check_status(struct ata_port *ap);
 static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
 static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@@ -297,6 +298,8 @@ static struct scsi_host_template sil24_sht = {
 static const struct ata_port_operations sil24_ops = {
        .port_disable           = ata_port_disable,
+        .dev_config             = sil24_dev_config,
        .check_status           = sil24_check_status,
        .check_altstatus        = sil24_check_status,
        .dev_select             = ata_noop_dev_select,
@@ -333,7 +336,7 @@ static struct ata_port_info sil24_port_info[] = {
        {
                .sht            = &sil24_sht,
                .host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+                                  ATA_FLAG_SRST | ATA_FLAG_MMIO |
                                  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
                .pio_mask       = 0x1f,                 /* pio0-4 */
                .mwdma_mask     = 0x07,                 /* mwdma0-2 */
@@ -344,7 +347,7 @@ static struct ata_port_info sil24_port_info[] = {
        {
                .sht            = &sil24_sht,
                .host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+                                  ATA_FLAG_SRST | ATA_FLAG_MMIO |
                                  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
                .pio_mask       = 0x1f,                 /* pio0-4 */
                .mwdma_mask     = 0x07,                 /* mwdma0-2 */
@@ -355,7 +358,7 @@ static struct ata_port_info sil24_port_info[] = {
        {
                .sht            = &sil24_sht,
                .host_flags     = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-                                  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+                                  ATA_FLAG_SRST | ATA_FLAG_MMIO |
                                  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
                .pio_mask       = 0x1f,                 /* pio0-4 */
                .mwdma_mask     = 0x07,                 /* mwdma0-2 */
@@ -364,6 +367,16 @@ static struct ata_port_info sil24_port_info[] = {
        },
 };
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+        void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+        if (ap->cdb_len == 16)
+                writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
+        else
+                writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
+}
 static inline void sil24_update_tf(struct ata_port *ap)
 {
        struct sil24_port_priv *pp = ap->private_data;
@@ -415,22 +428,73 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
        *tf = pp->tf;
 }
-static void sil24_phy_reset(struct ata_port *ap)
+static int sil24_issue_SRST(struct ata_port *ap)
 {
-        __sata_phy_reset(ap);
+        void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+        struct sil24_port_priv *pp = ap->private_data;
+        struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
+        dma_addr_t paddr = pp->cmd_block_dma;
+        u32 irq_enable, irq_stat;
+        int cnt;
+        /* temporarily turn off IRQs during SRST */
+        irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
+        writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
        /*
-         * No ATAPI yet.  Just unconditionally indicate ATA device.
+         * XXX: Not sure whether the following sleep is needed or not.
-         * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
+         * The original driver had it.  So....
-         * and libata core will ignore the device.
         */
-        if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
+        msleep(10);
-                ap->device[0].class = ATA_DEV_ATA;
+        prb->ctrl = PRB_CTRL_SRST;
+        prb->fis[1] = 0; /* no PM yet */
+        writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+        for (cnt = 0; cnt < 100; cnt++) {
+                irq_stat = readl(port + PORT_IRQ_STAT);
+                writel(irq_stat, port + PORT_IRQ_STAT);         /* clear irq */
+                irq_stat >>= PORT_IRQ_RAW_SHIFT;
+                if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
+                        break;
+                msleep(1);
+        }
+        /* restore IRQs */
+        writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
+        if (!(irq_stat & PORT_IRQ_COMPLETE))
+                return -1;
+        /* update TF */
+        sil24_update_tf(ap);
+        return 0;
+}
+static void sil24_phy_reset(struct ata_port *ap)
+{
+        struct sil24_port_priv *pp = ap->private_data;
+        __sata_phy_reset(ap);
+        if (ap->flags & ATA_FLAG_PORT_DISABLED)
+                return;
+        if (sil24_issue_SRST(ap) < 0) {
+                printk(KERN_ERR DRV_NAME
+                       " ata%u: SRST failed, disabling port\n", ap->id);
+                ap->ops->port_disable(ap);
+                return;
+        }
+        ap->device->class = ata_dev_classify(&pp->tf);
 }
 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
-                                 struct sil24_cmd_block *cb)
+                                 struct sil24_sge *sge)
 {
-        struct sil24_sge *sge = cb->sge;
        struct scatterlist *sg;
        unsigned int idx = 0;
@@ -451,23 +515,47 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 {
        struct ata_port *ap = qc->ap;
        struct sil24_port_priv *pp = ap->private_data;
-        struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+        union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
-        struct sil24_prb *prb = &cb->prb;
+        struct sil24_prb *prb;
+        struct sil24_sge *sge;
        switch (qc->tf.protocol) {
        case ATA_PROT_PIO:
        case ATA_PROT_DMA:
        case ATA_PROT_NODATA:
+                prb = &cb->ata.prb;
+                sge = cb->ata.sge;
+                prb->ctrl = 0;
+                break;
+        case ATA_PROT_ATAPI:
+        case ATA_PROT_ATAPI_DMA:
+        case ATA_PROT_ATAPI_NODATA:
+                prb = &cb->atapi.prb;
+                sge = cb->atapi.sge;
+                memset(cb->atapi.cdb, 0, 32);
+                memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
+                if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
+                        if (qc->tf.flags & ATA_TFLAG_WRITE)
+                                prb->ctrl = PRB_CTRL_PACKET_WRITE;
+                        else
+                                prb->ctrl = PRB_CTRL_PACKET_READ;
+                } else
+                        prb->ctrl = 0;
                break;
        default:
-                /* ATAPI isn't supported yet */
+                prb = NULL;     /* shut up, gcc */
+                sge = NULL;
                BUG();
        }
        ata_tf_to_fis(&qc->tf, prb->fis, 0);
        if (qc->flags & ATA_QCFLAG_DMAMAP)
-                sil24_fill_sg(qc, cb);
+                sil24_fill_sg(qc, sge);
 }
 static int sil24_qc_issue(struct ata_queued_cmd *qc)
@@ -486,6 +574,31 @@ static void sil24_irq_clear(struct ata_port *ap)
        /* unused */
 }
+static int __sil24_restart_controller(void __iomem *port)
+{
+        u32 tmp;
+        int cnt;
+        writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+        /* Max ~10ms */
+        for (cnt = 0; cnt < 10000; cnt++) {
+                tmp = readl(port + PORT_CTRL_STAT);
+                if (tmp & PORT_CS_RDY)
+                        return 0;
+                udelay(1);
+        }
+        return -1;
+}
+static void sil24_restart_controller(struct ata_port *ap)
+{
+        if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
+                printk(KERN_ERR DRV_NAME
+                       " ata%u: failed to restart controller\n", ap->id);
+}
 static int __sil24_reset_controller(void __iomem *port)
 {
        int cnt;
@@ -505,7 +618,11 @@ static int __sil24_reset_controller(void __iomem *port)
        if (tmp & PORT_CS_DEV_RST)
                return -1;
-        return 0;
+        if (tmp & PORT_CS_RDY)
+                return 0;
+        return __sil24_restart_controller(port);
 }
 static void sil24_reset_controller(struct ata_port *ap)
@@ -567,9 +684,15 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
        if (serror)
                writel(serror, port + PORT_SERROR);
-        printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
+        /*
-               "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+         * Don't log ATAPI device errors.  They're supposed to happen
-               ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+         * and any serious errors will be logged using sense data by
+         * the SCSI layer.
+         */
+        if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
+                printk("ata%u: error interrupt on port%d\n"
+                       "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+                       ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
        if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
                /*
@@ -577,6 +700,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
                 */
                sil24_update_tf(ap);
                err_mask = ac_err_mask(pp->tf.command);
+                sil24_restart_controller(ap);
        } else {
                /*
                 * Other errors.  libata currently doesn't have any
@@ -584,12 +708,11 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
                 * ATA_ERR.
                 */
                err_mask = AC_ERR_OTHER;
+                sil24_reset_controller(ap);
        }
        if (qc)
                ata_qc_complete(qc, err_mask);
-        sil24_reset_controller(ap);
 }
 static inline void sil24_host_intr(struct ata_port *ap)
@@ -665,7 +788,7 @@ static int sil24_port_start(struct ata_port *ap)
 {
        struct device *dev = ap->host_set->dev;
        struct sil24_port_priv *pp;
-        struct sil24_cmd_block *cb;
+        union sil24_cmd_block *cb;
        size_t cb_size = sizeof(*cb);
        dma_addr_t cb_dma;
        int rc = -ENOMEM;
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 18755766e406..2ec6a78bd65e 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -185,7 +185,7 @@ static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
 static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
 {
-        struct usb_hcd *hcd = platform_get_drvdata(dev);
+        struct usb_hcd *hcd = platform_get_drvdata(pdev);
        usb_hcd_ppc_soc_remove(hcd, pdev);
        return 0;
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 2c856838694e..00d87f5bb7be 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -26,6 +26,7 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/pci.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -325,8 +326,8 @@ static void __init offb_init_nodriver(struct device_node *dp)
        int *pp, i;
        unsigned int len;
        int width = 640, height = 480, depth = 8, pitch;
-        unsigned *up;
+        unsigned int rsize, *up;
-        unsigned long address;
+        unsigned long address = 0;
        if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
            && len == sizeof(int))
@@ -344,10 +345,40 @@ static void __init offb_init_nodriver(struct device_node *dp)
                        pitch = 0x1000;
        } else
                pitch = width;
-        if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL
-            && len == sizeof(unsigned))
+       rsize = (unsigned long)pitch * (unsigned long)height *
+               (unsigned long)(depth / 8);
+       /* Try to match device to a PCI device in order to get a properly
+        * translated address rather then trying to decode the open firmware
+        * stuff in various incorrect ways
+        */
+#ifdef CONFIG_PCI
+       /* First try to locate the PCI device if any */
+       {
+               struct pci_dev *pdev = NULL;
+               for_each_pci_dev(pdev) {
+                       if (dp == pci_device_to_OF_node(pdev))
+                               break;
+               }
+               if (pdev) {
+                       for (i = 0; i < 6 && address == 0; i++) {
+                               if ((pci_resource_flags(pdev, i) &
+                                    IORESOURCE_MEM) &&
+                                   (pci_resource_len(pdev, i) >= rsize))
+                                       address = pci_resource_start(pdev, i);
+                       }
+                       pci_dev_put(pdev);
+               }
+        }
+#endif /* CONFIG_PCI */
+        if (address == 0 &&
+            (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
+            len == sizeof(unsigned))
                address = (u_long) * up;
-        else {
+        if (address == 0) {
                for (i = 0; i < dp->n_addrs; ++i)
                        if (dp->addrs[i].size >=
                            pitch * height * depth / 8)
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index f07e60f9e102..991c00de5c4e 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -49,6 +49,8 @@
 #include <linux/vt_kern.h>
 #include <linux/fb.h>
 #include <linux/ext2_fs.h>
+#include <linux/ext3_jbd.h>
+#include <linux/ext3_fs.h>
 #include <linux/videodev.h>
 #include <linux/netdevice.h>
 #include <linux/raw.h>
@@ -134,6 +136,15 @@
 /* Aiee. Someone does not find a difference between int and long */
 #define EXT2_IOC32_GETFLAGS               _IOR('f', 1, int)
 #define EXT2_IOC32_SETFLAGS               _IOW('f', 2, int)
+#define EXT3_IOC32_GETVERSION             _IOR('f', 3, int)
+#define EXT3_IOC32_SETVERSION             _IOR('f', 4, int)
+#define EXT3_IOC32_GETRSVSZ               _IOR('f', 5, int)
+#define EXT3_IOC32_SETRSVSZ               _IOW('f', 6, int)
+#define EXT3_IOC32_GROUP_EXTEND           _IOW('f', 7, unsigned int)
+#ifdef CONFIG_JBD_DEBUG
+#define EXT3_IOC32_WAIT_FOR_READONLY      _IOR('f', 99, int)
+#endif
 #define EXT2_IOC32_GETVERSION             _IOR('v', 1, int)
 #define EXT2_IOC32_SETVERSION             _IOW('v', 2, int)
@@ -180,6 +191,22 @@ static int do_ext2_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
        return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
 }
+static int do_ext3_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+{
+        /* These are just misnamed, they actually get/put from/to user an int */
+        switch (cmd) {
+        case EXT3_IOC32_GETVERSION: cmd = EXT3_IOC_GETVERSION; break;
+        case EXT3_IOC32_SETVERSION: cmd = EXT3_IOC_SETVERSION; break;
+        case EXT3_IOC32_GETRSVSZ: cmd = EXT3_IOC_GETRSVSZ; break;
+        case EXT3_IOC32_SETRSVSZ: cmd = EXT3_IOC_SETRSVSZ; break;
+        case EXT3_IOC32_GROUP_EXTEND: cmd = EXT3_IOC_GROUP_EXTEND; break;
+#ifdef CONFIG_JBD_DEBUG
+        case EXT3_IOC32_WAIT_FOR_READONLY: cmd = EXT3_IOC_WAIT_FOR_READONLY; break;
+#endif
+        }
+        return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
+}
 struct video_tuner32 {
        compat_int_t tuner;
        char name[32];
@@ -2981,6 +3008,15 @@ HANDLE_IOCTL(EXT2_IOC32_GETFLAGS, do_ext2_ioctl)
 HANDLE_IOCTL(EXT2_IOC32_SETFLAGS, do_ext2_ioctl)
 HANDLE_IOCTL(EXT2_IOC32_GETVERSION, do_ext2_ioctl)
 HANDLE_IOCTL(EXT2_IOC32_SETVERSION, do_ext2_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GETVERSION, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_SETVERSION, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GETRSVSZ, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_SETRSVSZ, do_ext3_ioctl)
+HANDLE_IOCTL(EXT3_IOC32_GROUP_EXTEND, do_ext3_ioctl)
+COMPATIBLE_IOCTL(EXT3_IOC_GROUP_ADD)
+#ifdef CONFIG_JBD_DEBUG
+HANDLE_IOCTL(EXT3_IOC32_WAIT_FOR_READONLY, do_ext3_ioctl)
+#endif
 HANDLE_IOCTL(VIDIOCGTUNER32, do_video_ioctl)
 HANDLE_IOCTL(VIDIOCSTUNER32, do_video_ioctl)
 HANDLE_IOCTL(VIDIOCGWIN32, do_video_ioctl)
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 04e2726002cf..d1cfa3f515ea 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -90,6 +90,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
 #define CPU_FTR_NEED_COHERENT           ASM_CONST(0x0000000000020000)
 #define CPU_FTR_NO_BTIC                 ASM_CONST(0x0000000000040000)
 #define CPU_FTR_BIG_PHYS                ASM_CONST(0x0000000000080000)
+#define CPU_FTR_NODSISRALIGN            ASM_CONST(0x0000000000100000)
 #ifdef __powerpc64__
 /* Add the 64b processor unique features in the top half of the word */
@@ -97,7 +98,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
 #define CPU_FTR_16M_PAGE                ASM_CONST(0x0000000200000000)
 #define CPU_FTR_TLBIEL                  ASM_CONST(0x0000000400000000)
 #define CPU_FTR_NOEXECUTE               ASM_CONST(0x0000000800000000)
-#define CPU_FTR_NODSISRALIGN            ASM_CONST(0x0000001000000000)
 #define CPU_FTR_IABR                    ASM_CONST(0x0000002000000000)
 #define CPU_FTR_MMCRA                   ASM_CONST(0x0000004000000000)
 #define CPU_FTR_CTRL                    ASM_CONST(0x0000008000000000)
@@ -113,7 +113,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
 #define CPU_FTR_16M_PAGE                ASM_CONST(0x0)
 #define CPU_FTR_TLBIEL                  ASM_CONST(0x0)
 #define CPU_FTR_NOEXECUTE               ASM_CONST(0x0)
-#define CPU_FTR_NODSISRALIGN            ASM_CONST(0x0)
 #define CPU_FTR_IABR                    ASM_CONST(0x0)
 #define CPU_FTR_MMCRA                   ASM_CONST(0x0)
 #define CPU_FTR_CTRL                    ASM_CONST(0x0)
@@ -273,18 +272,21 @@ enum {
        CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
            CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
        CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
-            CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
+            CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN,
        CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
            CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP |
-            CPU_FTR_MAYBE_CAN_NAP,
+            CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN,
        CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
-        CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
+        CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-        CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
+            CPU_FTR_NODSISRALIGN,
-        CPU_FTRS_E200 = CPU_FTR_USE_TB,
+        CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-        CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
+            CPU_FTR_NODSISRALIGN,
+        CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN,
+        CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+            CPU_FTR_NODSISRALIGN,
        CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-            CPU_FTR_BIG_PHYS,
+            CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN,
-        CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON,
+        CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN,
 #ifdef __powerpc64__
        CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
            CPU_FTR_HPTE_TABLE | CPU_FTR_IABR,
diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h
index 1492aa9ab716..54fe1f4f8fd0 100644
--- a/include/asm-powerpc/delay.h
+++ b/include/asm-powerpc/delay.h
@@ -13,43 +13,7 @@
 * Anton Blanchard.
 */
-extern unsigned long tb_ticks_per_usec;
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
-#ifdef CONFIG_PPC64
-/* define these here to prevent circular dependencies */
-/* these instructions control the thread priority on multi-threaded cpus */
-#define __HMT_low()     asm volatile("or 1,1,1")
-#define __HMT_medium()  asm volatile("or 2,2,2")
-#else
-#define __HMT_low()
-#define __HMT_medium()
-#endif
-#define __barrier()     asm volatile("" ::: "memory")
-static inline unsigned long __get_tb(void)
-{
-        unsigned long rval;
-        asm volatile("mftb %0" : "=r" (rval));
-        return rval;
-}
-static inline void __delay(unsigned long loops)
-{
-        unsigned long start = __get_tb();
-        while((__get_tb() - start) < loops)
-                __HMT_low();
-        __HMT_medium();
-        __barrier();
-}
-static inline void udelay(unsigned long usecs)
-{
-        unsigned long loops = tb_ticks_per_usec * usecs;
-        __delay(loops);
-}
 #endif /* _ASM_POWERPC_DELAY_H */
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index 89f26ab31908..f8633aafe4ba 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -30,6 +30,8 @@ struct device_node;
 #ifdef CONFIG_EEH
+extern int eeh_subsystem_enabled;
 /* Values for eeh_mode bits in device_node */
 #define EEH_MODE_SUPPORTED      (1<<0)
 #define EEH_MODE_NOCHECK        (1<<1)
@@ -75,7 +77,7 @@ void eeh_remove_device(struct pci_dev *);
 * If this macro yields TRUE, the caller relays to eeh_check_failure()
 * which does further tests out of line.
 */
-#define EEH_POSSIBLE_ERROR(val, type)   ((val) == (type)~0)
+#define EEH_POSSIBLE_ERROR(val, type)   ((val) == (type)~0 && eeh_subsystem_enabled)
 /*
 * Reads from a device which has been isolated by EEH will return
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
index c16f106b5373..1e6e7846824f 100644
--- a/include/asm-powerpc/page_64.h
+++ b/include/asm-powerpc/page_64.h
@@ -86,7 +86,11 @@ static inline void copy_page(void *to, void *from)
 extern u64 ppc64_pft_size;
 /* Large pages size */
+#ifdef CONFIG_HUGETLB_PAGE
 extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
 #define HPAGE_SIZE              ((1UL) << HPAGE_SHIFT)
 #define HPAGE_MASK              (~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER      (HPAGE_SHIFT - PAGE_SHIFT)
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
index 015d28746e1b..db8095cbe09b 100644
--- a/include/asm-powerpc/topology.h
+++ b/include/asm-powerpc/topology.h
@@ -41,6 +41,10 @@ static inline int node_to_first_cpu(int node)
        .cache_hot_time         = (10*1000000),         \
        .cache_nice_tries       = 1,                    \
        .per_cpu_gain           = 100,                  \
+        .busy_idx               = 3,                    \
+        .idle_idx               = 1,                    \
+        .newidle_idx            = 2,                    \
+        .wake_idx               = 1,                    \
        .flags                  = SD_LOAD_BALANCE       \
                                | SD_BALANCE_EXEC       \
                                | SD_BALANCE_NEWIDLE    \
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index 43d2ebbc7748..b638b87cebe3 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -1091,5 +1091,7 @@ typedef struct im_idma {
 #define CPM_IMMR_OFFSET 0x101a8
 #endif
+#define FCC_PSMR_RMII   ((uint)0x00020000)      /* Use RMII interface */
 #endif /* __CPM2__ */
 #endif /* __KERNEL__ */
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index b93fd8c1d884..cde2f4f4f501 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -1042,7 +1042,7 @@ static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
        case IEEE80211_4ADDR_LEN:
                return ((struct ieee80211_hdr_4addr *)hdr)->payload;
        }
+        return NULL;
 }
 static inline int ieee80211_is_ofdm_rate(u8 rate)
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index eb6719c50b4e..88c28d476550 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -80,6 +80,7 @@ struct rcu_torture {
        struct rcu_head rtort_rcu;
        int rtort_pipe_count;
        struct list_head rtort_free;
+        int rtort_mbtest;
 };
 static int fullstop = 0;        /* stop generating callbacks at test end. */
@@ -96,6 +97,8 @@ static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1];
 atomic_t n_rcu_torture_alloc;
 atomic_t n_rcu_torture_alloc_fail;
 atomic_t n_rcu_torture_free;
+atomic_t n_rcu_torture_mberror;
+atomic_t n_rcu_torture_error;
 /*
 * Allocate an element from the rcu_tortures pool.
@@ -145,9 +148,10 @@ rcu_torture_cb(struct rcu_head *p)
        if (i > RCU_TORTURE_PIPE_LEN)
                i = RCU_TORTURE_PIPE_LEN;
        atomic_inc(&rcu_torture_wcount[i]);
-        if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN)
+        if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) {
+                rp->rtort_mbtest = 0;
                rcu_torture_free(rp);
-        else
+        } else
                call_rcu(p, rcu_torture_cb);
 }
@@ -206,6 +210,7 @@ rcu_torture_writer(void *arg)
                rp->rtort_pipe_count = 0;
                udelay(rcu_random(&rand) & 0x3ff);
                old_rp = rcu_torture_current;
+                rp->rtort_mbtest = 1;
                rcu_assign_pointer(rcu_torture_current, rp);
                smp_wmb();
                if (old_rp != NULL) {
@@ -252,6 +257,8 @@ rcu_torture_reader(void *arg)
                        schedule_timeout_interruptible(HZ);
                        continue;
                }
+                if (p->rtort_mbtest == 0)
+                        atomic_inc(&n_rcu_torture_mberror);
                udelay(rcu_random(&rand) & 0x7f);
                preempt_disable();
                pipe_count = p->rtort_pipe_count;
@@ -300,16 +307,22 @@ rcu_torture_printk(char *page)
        }
        cnt += sprintf(&page[cnt], "rcutorture: ");
        cnt += sprintf(&page[cnt],
-                       "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d",
+                       "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
+                       "rtmbe: %d",
                       rcu_torture_current,
                       rcu_torture_current_version,
                       list_empty(&rcu_torture_freelist),
                       atomic_read(&n_rcu_torture_alloc),
                       atomic_read(&n_rcu_torture_alloc_fail),
-                       atomic_read(&n_rcu_torture_free));
+                       atomic_read(&n_rcu_torture_free),
+                       atomic_read(&n_rcu_torture_mberror));
+        if (atomic_read(&n_rcu_torture_mberror) != 0)
+                cnt += sprintf(&page[cnt], " !!!");
        cnt += sprintf(&page[cnt], "\nrcutorture: ");
-        if (i > 1)
+        if (i > 1) {
                cnt += sprintf(&page[cnt], "!!! ");
+                atomic_inc(&n_rcu_torture_error);
+        }
        cnt += sprintf(&page[cnt], "Reader Pipe: ");
        for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
                cnt += sprintf(&page[cnt], " %ld", pipesummary[i]);
@@ -400,7 +413,9 @@ rcu_torture_cleanup(void)
        for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++)
                synchronize_rcu();
        rcu_torture_stats_print();  /* -After- the stats thread is stopped! */
-        PRINTK_STRING("--- End of test");
+        printk(KERN_ALERT TORTURE_FLAG
+               "--- End of test: %s\n",
+               atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE");
 }
 static int
@@ -425,6 +440,7 @@ rcu_torture_init(void)
        INIT_LIST_HEAD(&rcu_torture_freelist);
        for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) {
+                rcu_tortures[i].rtort_mbtest = 0;
                list_add_tail(&rcu_tortures[i].rtort_free,
                              &rcu_torture_freelist);
        }
@@ -436,6 +452,8 @@ rcu_torture_init(void)
        atomic_set(&n_rcu_torture_alloc, 0);
        atomic_set(&n_rcu_torture_alloc_fail, 0);
        atomic_set(&n_rcu_torture_free, 0);
+        atomic_set(&n_rcu_torture_mberror, 0);
+        atomic_set(&n_rcu_torture_error, 0);
        for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
                atomic_set(&rcu_torture_wcount[i], 0);
        for_each_cpu(cpu) {
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 74138c9a22b9..0166ea15c9ee 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -750,6 +750,7 @@ int clear_page_dirty_for_io(struct page *page)
        }
        return TestClearPageDirty(page);
 }
+EXPORT_SYMBOL(clear_page_dirty_for_io);
 int test_clear_page_writeback(struct page *page)
 {
diff --git a/net/ipv4/netfilter/ip_conntrack_ftp.c b/net/ipv4/netfilter/ip_conntrack_ftp.c
index d77d6b3f5f80..59e12b02b22c 100644
--- a/net/ipv4/netfilter/ip_conntrack_ftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_ftp.c
@@ -29,9 +29,9 @@ static char *ftp_buffer;
 static DEFINE_SPINLOCK(ip_ftp_lock);
 #define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
 static int ports_c;
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
 static int loose;
 module_param(loose, int, 0600);
diff --git a/net/ipv4/netfilter/ip_conntrack_irc.c b/net/ipv4/netfilter/ip_conntrack_irc.c
index 15457415a4f3..2dea1db14406 100644
--- a/net/ipv4/netfilter/ip_conntrack_irc.c
+++ b/net/ipv4/netfilter/ip_conntrack_irc.c
@@ -34,7 +34,7 @@
 #include <linux/moduleparam.h>
 #define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
 static int ports_c;
 static int max_dcc_channels = 8;
 static unsigned int dcc_timeout = 300;
@@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ip_nat_irc_hook);
 MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
 MODULE_DESCRIPTION("IRC (DCC) connection tracking helper");
 MODULE_LICENSE("GPL");
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
 MODULE_PARM_DESC(ports, "port numbers of IRC servers");
 module_param(max_dcc_channels, int, 0400);
 MODULE_PARM_DESC(max_dcc_channels, "max number of expected DCC channels per IRC session");
diff --git a/net/ipv4/netfilter/ip_conntrack_tftp.c b/net/ipv4/netfilter/ip_conntrack_tftp.c
index a78736b8525d..d3c5a371f993 100644
--- a/net/ipv4/netfilter/ip_conntrack_tftp.c
+++ b/net/ipv4/netfilter/ip_conntrack_tftp.c
@@ -26,9 +26,9 @@ MODULE_DESCRIPTION("tftp connection tracking helper");
 MODULE_LICENSE("GPL");
 #define MAX_PORTS 8
-static short ports[MAX_PORTS];
+static unsigned short ports[MAX_PORTS];
 static int ports_c;
-module_param_array(ports, short, &ports_c, 0400);
+module_param_array(ports, ushort, &ports_c, 0400);
 MODULE_PARM_DESC(ports, "port numbers of tftp servers");
 #if 0
diff --git a/net/ipv4/tcp_highspeed.c b/net/ipv4/tcp_highspeed.c
index 82b3c189bd7d..63cf7e540847 100644
--- a/net/ipv4/tcp_highspeed.c
+++ b/net/ipv4/tcp_highspeed.c
@@ -111,7 +111,7 @@ static void hstcp_init(struct sock *sk)
 }
 static void hstcp_cong_avoid(struct sock *sk, u32 adk, u32 rtt,
-                             u32 in_flight, u32 pkts_acked)
+                             u32 in_flight, int data_acked)
 {
        struct tcp_sock *tp = tcp_sk(sk);
        struct hstcp *ca = inet_csk_ca(sk);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 9a71a8d1078a..a7a537b50595 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1732,7 +1732,7 @@ int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
                /*
                 * 2. allocate and initialize walker.
                 */
-                w = kmalloc(sizeof(*w), GFP_KERNEL);
+                w = kmalloc(sizeof(*w), GFP_ATOMIC);
                if (w == NULL)
                        return -ENOMEM;
                RT6_TRACE("dump<%p", w);
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index 91fb6bc1b116..8169f24ed33e 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -995,8 +995,8 @@ static int llc_conn_ac_inc_npta_value(struct sock *sk, struct sk_buff *skb)
                llc->dec_step = 0;
                llc->dec_cntr = llc->inc_cntr = 2;
                ++llc->npta;
-                if (llc->npta > ~LLC_2_SEQ_NBR_MODULO)
+                if (llc->npta > (u8) ~LLC_2_SEQ_NBR_MODULO)
-                        llc->npta = ~LLC_2_SEQ_NBR_MODULO ;
+                        llc->npta = (u8) ~LLC_2_SEQ_NBR_MODULO;
        } else
                --llc->inc_cntr;
        return 0;
@@ -1086,8 +1086,8 @@ int llc_conn_ac_inc_tx_win_size(struct sock *sk, struct sk_buff *skb)
        struct llc_sock *llc = llc_sk(sk);
        llc->k += 1;
-        if (llc->k > ~LLC_2_SEQ_NBR_MODULO)
+        if (llc->k > (u8) ~LLC_2_SEQ_NBR_MODULO)
-                llc->k = ~LLC_2_SEQ_NBR_MODULO ;
+                llc->k = (u8) ~LLC_2_SEQ_NBR_MODULO;
        return 0;
 }
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index 7f34e7fd767c..55cd5327fbd7 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -40,9 +40,10 @@ config NET_SCHED
          The available schedulers are listed in the following questions; you
          can say Y to as many as you like. If unsure, say N now.
+if NET_SCHED
 choice
        prompt "Packet scheduler clock source"
-        depends on NET_SCHED
        default NET_SCH_CLK_JIFFIES
        ---help---
          Packet schedulers need a monotonic clock that increments at a static
@@ -98,11 +99,9 @@ config NET_SCH_CLK_CPU
 endchoice
 comment "Queueing/Scheduling"
-        depends on NET_SCHED
 config NET_SCH_CBQ
        tristate "Class Based Queueing (CBQ)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the Class-Based Queueing (CBQ) packet
          scheduling algorithm. This algorithm classifies the waiting packets
@@ -120,7 +119,6 @@ config NET_SCH_CBQ
 config NET_SCH_HTB
        tristate "Hierarchical Token Bucket (HTB)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the Hierarchical Token Buckets (HTB)
          packet scheduling algorithm. See
@@ -135,7 +133,6 @@ config NET_SCH_HTB
 config NET_SCH_HFSC
        tristate "Hierarchical Fair Service Curve (HFSC)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the Hierarchical Fair Service Curve
          (HFSC) packet scheduling algorithm.
@@ -145,7 +142,7 @@ config NET_SCH_HFSC
 config NET_SCH_ATM
        tristate "ATM Virtual Circuits (ATM)"
-        depends on NET_SCHED && ATM
+        depends on ATM
        ---help---
          Say Y here if you want to use the ATM pseudo-scheduler.  This
          provides a framework for invoking classifiers, which in turn
@@ -159,7 +156,6 @@ config NET_SCH_ATM
 config NET_SCH_PRIO
        tristate "Multi Band Priority Queueing (PRIO)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use an n-band priority queue packet
          scheduler.
@@ -169,7 +165,6 @@ config NET_SCH_PRIO
 config NET_SCH_RED
        tristate "Random Early Detection (RED)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the Random Early Detection (RED)
          packet scheduling algorithm.
@@ -181,7 +176,6 @@ config NET_SCH_RED
 config NET_SCH_SFQ
        tristate "Stochastic Fairness Queueing (SFQ)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
          packet scheduling algorithm .
@@ -193,7 +187,6 @@ config NET_SCH_SFQ
 config NET_SCH_TEQL
        tristate "True Link Equalizer (TEQL)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the True Link Equalizer (TLE) packet
          scheduling algorithm. This queueing discipline allows the combination
@@ -206,7 +199,6 @@ config NET_SCH_TEQL
 config NET_SCH_TBF
        tristate "Token Bucket Filter (TBF)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the Token Bucket Filter (TBF) packet
          scheduling algorithm.
@@ -218,7 +210,6 @@ config NET_SCH_TBF
 config NET_SCH_GRED
        tristate "Generic Random Early Detection (GRED)"
-        depends on NET_SCHED
        ---help---
          Say Y here if you want to use the Generic Random Early Detection
          (GRED) packet scheduling algorithm for some of your network devices
@@ -230,7 +221,6 @@ config NET_SCH_GRED
 config NET_SCH_DSMARK
        tristate "Differentiated Services marker (DSMARK)"
-        depends on NET_SCHED
        ---help---
          Say Y if you want to schedule packets according to the
          Differentiated Services architecture proposed in RFC 2475.
@@ -242,7 +232,6 @@ config NET_SCH_DSMARK
 config NET_SCH_NETEM
        tristate "Network emulator (NETEM)"
-        depends on NET_SCHED
        ---help---
          Say Y if you want to emulate network delay, loss, and packet
          re-ordering. This is often useful to simulate networks when
@@ -255,7 +244,6 @@ config NET_SCH_NETEM
 config NET_SCH_INGRESS
        tristate "Ingress Qdisc"
-        depends on NET_SCHED 
        ---help---
          Say Y here if you want to use classifiers for incoming packets.
          If unsure, say Y.
@@ -264,14 +252,12 @@ config NET_SCH_INGRESS
          module will be called sch_ingress.
 comment "Classification"
-        depends on NET_SCHED
 config NET_CLS
        boolean
 config NET_CLS_BASIC
        tristate "Elementary classification (BASIC)"
-        depends NET_SCHED
        select NET_CLS
        ---help---
          Say Y here if you want to be able to classify packets using
@@ -282,7 +268,6 @@ config NET_CLS_BASIC
 config NET_CLS_TCINDEX
        tristate "Traffic-Control Index (TCINDEX)"
-        depends NET_SCHED
        select NET_CLS
        ---help---
          Say Y here if you want to be able to classify packets based on
@@ -294,7 +279,6 @@ config NET_CLS_TCINDEX
 config NET_CLS_ROUTE4
        tristate "Routing decision (ROUTE)"
-        depends NET_SCHED
        select NET_CLS_ROUTE
        select NET_CLS
        ---help---
@@ -306,11 +290,9 @@ config NET_CLS_ROUTE4
 config NET_CLS_ROUTE
        bool
-        default n
 config NET_CLS_FW
        tristate "Netfilter mark (FW)"
-        depends NET_SCHED
        select NET_CLS
        ---help---
          If you say Y here, you will be able to classify packets
@@ -321,7 +303,6 @@ config NET_CLS_FW
 config NET_CLS_U32
        tristate "Universal 32bit comparisons w/ hashing (U32)"
-        depends NET_SCHED
        select NET_CLS
        ---help---
          Say Y here to be able to classify packetes using a universal
@@ -345,7 +326,6 @@ config CLS_U32_MARK
 config NET_CLS_RSVP
        tristate "IPv4 Resource Reservation Protocol (RSVP)"
-        depends on NET_SCHED
        select NET_CLS
        select NET_ESTIMATOR
        ---help---
@@ -361,7 +341,6 @@ config NET_CLS_RSVP
 config NET_CLS_RSVP6
        tristate "IPv6 Resource Reservation Protocol (RSVP6)"
-        depends on NET_SCHED
        select NET_CLS
        select NET_ESTIMATOR
        ---help---
@@ -377,7 +356,6 @@ config NET_CLS_RSVP6
 config NET_EMATCH
        bool "Extended Matches"
-        depends NET_SCHED
        select NET_CLS
        ---help---
          Say Y here if you want to use extended matches on top of classifiers
@@ -456,7 +434,7 @@ config NET_EMATCH_TEXT
 config NET_CLS_ACT
        bool "Actions"
-        depends on EXPERIMENTAL && NET_SCHED
+        depends on EXPERIMENTAL
        select NET_ESTIMATOR
        ---help---
          Say Y here if you want to use traffic control actions. Actions
@@ -539,7 +517,7 @@ config NET_ACT_SIMP
 config NET_CLS_POLICE
        bool "Traffic Policing (obsolete)"
-        depends on NET_SCHED && NET_CLS_ACT!=y
+        depends on NET_CLS_ACT!=y
        select NET_ESTIMATOR
        ---help---
          Say Y here if you want to do traffic policing, i.e. strict
@@ -549,7 +527,7 @@ config NET_CLS_POLICE
 config NET_CLS_IND
        bool "Incoming device classification"
-        depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW)
+        depends on NET_CLS_U32 || NET_CLS_FW
        ---help---
          Say Y here to extend the u32 and fw classifier to support
          classification based on the incoming device. This option is
@@ -557,11 +535,12 @@ config NET_CLS_IND
 config NET_ESTIMATOR
        bool "Rate estimator"
-        depends on NET_SCHED
        ---help---
          Say Y here to allow using rate estimators to estimate the current
          rate-of-flow for network devices, queues, etc. This module is
          automaticaly selected if needed but can be selected manually for
          statstical purposes.
+endif # NET_SCHED
 endmenu