5 files changed, 40 insertions, 61 deletions

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index ed6128f6cd98..f0be5f665a0e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -571,25 +571,40 @@ EXPORT_SYMBOL(ide_wait_stat);
  */
 u8 eighty_ninty_three (ide_drive_t *drive)
 {
-        if(HWIF(drive)->udma_four == 0)
-                return 0;
+        ide_hwif_t *hwif = drive->hwif;
+        struct hd_driveid *id = drive->id;
+
+        if (hwif->udma_four == 0)
+                goto no_80w;
 
         /* Check for SATA but only if we are ATA5 or higher */
-        if (drive->id->hw_config == 0 && (drive->id->major_rev_num & 0x7FE0))
+        if (id->hw_config == 0 && (id->major_rev_num & 0x7FE0))
                 return 1;
-        if (!(drive->id->hw_config & 0x6000))
-                return 0;
-#ifndef CONFIG_IDEDMA_IVB
-        if(!(drive->id->hw_config & 0x4000))
-                return 0;
-#endif /* CONFIG_IDEDMA_IVB */
+
         /*
          * FIXME:
          * - change master/slave IDENTIFY order
          * - force bit13 (80c cable present) check
          *   (unless the slave device is pre-ATA3)
          */
-        return 1;
+#ifndef CONFIG_IDEDMA_IVB
+        if (id->hw_config & 0x4000)
+#else
+        if (id->hw_config & 0x6000)
+#endif
+                return 1;
+
+no_80w:
+        if (drive->udma33_warned == 1)
+                return 0;
+
+        printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
+                            "limiting max speed to UDMA33\n",
+                            drive->name, hwif->udma_four ? "drive" : "host");
+
+        drive->udma33_warned = 1;
+
+        return 0;
 }
 
 int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
@@ -597,23 +612,13 @@ int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
         if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
             (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) &&
             (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) {
-#ifndef CONFIG_IDEDMA_IVB
-                if ((drive->id->hw_config & 0x6000) == 0) {
-#else /* !CONFIG_IDEDMA_IVB */
-                if (((drive->id->hw_config & 0x2000) == 0) ||
-                    ((drive->id->hw_config & 0x4000) == 0)) {
-#endif /* CONFIG_IDEDMA_IVB */
-                        printk("%s: Speed warnings UDMA 3/4/5 is not "
-                                "functional.\n", drive->name);
-                        return 1;
-                }
-                if (!HWIF(drive)->udma_four) {
-                        printk("%s: Speed warnings UDMA 3/4/5 is not "
-                                "functional.\n",
-                                HWIF(drive)->name);
+                if (eighty_ninty_three(drive) == 0) {
+                        printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
+                                            "be set\n", drive->name);
                         return 1;
                 }
         }
+
         return 0;
 }
 
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 4557fc5a3ea3..3be3c69383f2 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -88,8 +88,15 @@ u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
         if (hwif->udma_filter)
                 mask = hwif->udma_filter(drive);
 
-        if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
-                mask &= 0x07;
+        /*
+         * TODO: speed > XFER_UDMA_2 extra check is needed to avoid false
+         * cable warning from eighty_ninty_three(), moving ide_rate_filter()
+         * calls from ->speedproc to core code will make this hack go away
+         */
+        if (speed > XFER_UDMA_2) {
+                if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
+                        mask &= 0x07;
+        }
 
         if (mask)
                 mode = fls(mask) - 1 + XFER_UDMA_0;
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 772ca4007de4..65b1e124edf7 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -37,8 +37,6 @@
 #include <asm/pci-bridge.h>
 #endif
 
-#define PDC202_DEBUG_CABLE      0
-
 #undef DEBUG
 
 #ifdef DEBUG
@@ -234,17 +232,8 @@ static int config_chipset_for_dma(ide_drive_t *drive)
 {
         struct hd_driveid *id   = drive->id;
         ide_hwif_t *hwif        = HWIF(drive);
-        u8 ultra_66             = (id->dma_ultra & 0x0078) ? 1 : 0;
-        u8 cable                = pdcnew_cable_detect(hwif);
         u8 speed;
 
-        if (ultra_66 && cable) {
-                printk(KERN_WARNING "Warning: %s channel "
-                       "requires an 80-pin cable for operation.\n",
-                       hwif->channel ? "Secondary" : "Primary");
-                printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
-        }
-
         if (id->capability & 4) {
                 /*
                  * Set IORDY_EN & PREFETCH_EN (this seems to have
@@ -547,11 +536,6 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
         if (!noautodma)
                 hwif->autodma = 1;
         hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
-
-#if PDC202_DEBUG_CABLE
-        printk(KERN_DEBUG "%s: %s-pin cable\n",
-                hwif->name, hwif->udma_four ? "80" : "40");
-#endif /* PDC202_DEBUG_CABLE */
 }
 
 static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 207a6191fac7..7146fe3f6ba7 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#define PDC202_DEBUG_CABLE              0
 #define PDC202XX_DEBUG_DRIVE_INFO       0
 
 static const char *pdc_quirk_drives[] = {
@@ -238,20 +237,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
         u32 drive_conf          = 0;
         u8 drive_pci            = 0x60 + (drive->dn << 2);
         u8 test1 = 0, test2 = 0, speed = -1;
-        u8 AP = 0, cable = 0;
-
-        u8 ultra_66             = ((id->dma_ultra & 0x0010) ||
-                                   (id->dma_ultra & 0x0008)) ? 1 : 0;
-
-        if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
-                cable = pdc202xx_old_cable_detect(hwif);
-        else
-                ultra_66 = 0;
-
-        if (ultra_66 && cable) {
-                printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
-                printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
-        }
+        u8 AP = 0;
 
         if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
                 pdc_old_disable_66MHz_clock(drive->hwif);
@@ -477,10 +463,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
         if (!noautodma)
                 hwif->autodma = 1;
         hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
-#if PDC202_DEBUG_CABLE
-        printk(KERN_DEBUG "%s: %s-pin cable\n",
-                hwif->name, hwif->udma_four ? "80" : "40");
-#endif /* PDC202_DEBUG_CABLE */ 
 }
 
 static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 477b8c6be727..ca924b295c2e 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -605,6 +605,7 @@ typedef struct ide_drive_s {
         unsigned scsi           : 1;    /* 0=default, 1=ide-scsi emulation */
         unsigned sleeping       : 1;    /* 1=sleeping & sleep field valid */
         unsigned post_reset     : 1;
+        unsigned udma33_warned  : 1;
 
         u8      addressing;     /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
         u8      quirk_list;     /* considered quirky, set for a specific host */