35 files changed, 8484 insertions, 4729 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 12533a958c51..e3394eb42cb7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -181,19 +181,41 @@ and is between 256 and 4096 characters. It is defined in the file
                         that require a timer override, but don't have
                         HPET
 
-        acpi_dbg_layer= [HW,ACPI]
+        acpi.debug_layer=       [HW,ACPI]
                         Format: <int>
                         Each bit of the <int> indicates an ACPI debug layer,
                         1: enable, 0: disable. It is useful for boot time
                         debugging. After system has booted up, it can be set
-                        via /proc/acpi/debug_layer.
-
-        acpi_dbg_level= [HW,ACPI]
+                        via /sys/module/acpi/parameters/debug_layer.
+                        CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
+                        Available bits (add the numbers together) to enable debug output
+                        for specific parts of the ACPI subsystem:
+                        0x01 utilities 0x02 hardware 0x04 events 0x08 tables
+                        0x10 namespace 0x20 parser 0x40 dispatcher
+                        0x80 executer 0x100 resources 0x200 acpica debugger
+                        0x400 os services 0x800 acpica disassembler.
+                        The number can be in decimal or prefixed with 0x in hex.
+                        Warning: Many of these options can produce a lot of
+                        output and make your system unusable. Be very careful.
+
+        acpi.debug_level=       [HW,ACPI]
                         Format: <int>
                         Each bit of the <int> indicates an ACPI debug level,
                         1: enable, 0: disable. It is useful for boot time
                         debugging. After system has booted up, it can be set
-                        via /proc/acpi/debug_level.
+                        via /sys/module/acpi/parameters/debug_level.
+                        CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
+                        Available bits (add the numbers together) to enable different
+                        debug output levels of the ACPI subsystem:
+                        0x01 error 0x02 warn 0x04 init 0x08 debug object
+                        0x10 info 0x20 init names 0x40 parse 0x80 load
+                        0x100 dispatch 0x200 execute 0x400 names 0x800 operation region
+                        0x1000 bfield 0x2000 tables 0x4000 values 0x8000 objects
+                        0x10000 resources 0x20000 user requests 0x40000 package.
+                        The number can be in decimal or prefixed with 0x in hex.
+                        Warning: Many of these options can produce a lot of
+                        output and make your system unusable. Be very careful.
+
 
         acpi_fake_ecdt  [HW,ACPI] Workaround failure due to BIOS lacking ECDT
 
diff --git a/Documentation/sony-laptop.txt b/Documentation/sony-laptop.txt
index dfd26df056f4..7a5c1a81905c 100644
--- a/Documentation/sony-laptop.txt
+++ b/Documentation/sony-laptop.txt
@@ -3,12 +3,18 @@ Sony Notebook Control Driver (SNC) Readme
         Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
         Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
 
-This mini-driver drives the SNC device present in the ACPI BIOS of
-the Sony Vaio laptops.
+This mini-driver drives the SNC and SPIC device present in the ACPI BIOS of the
+Sony Vaio laptops. This driver mixes both devices functions under the same
+(hopefully consistent) interface. This also means that the sonypi driver is
+obsoleted by sony-laptop now.
 
-It gives access to some extra laptop functionalities. In its current
-form, this driver let the user set or query the screen brightness
-through the backlight subsystem and remove/apply power to some devices.
+Fn keys (hotkeys):
+------------------
+Some models report hotkeys through the SNC or SPIC devices, such events are
+reported both through the ACPI subsystem as acpi events and through the INPUT
+subsystem. See the logs of acpid or /proc/acpi/event and
+/proc/bus/input/devices to find out what those events are and which input
+devices are created by the driver.
 
 Backlight control:
 ------------------
@@ -39,6 +45,8 @@ The files are:
         audiopower              power on/off the internal sound card
         lanpower                power on/off the internal ethernet card
                                 (only in debug mode)
+        bluetoothpower          power on/off the internal bluetooth device
+        fanspeed                get/set the fan speed
 
 Note that some files may be missing if they are not supported
 by your particular laptop model.
@@ -76,9 +84,9 @@ The sony-laptop driver creates, for some of those methods (the most
 current ones found on several Vaio models), an entry under
 /sys/devices/platform/sony-laptop, just like the 'cdpower' one.
 You can create other entries corresponding to your own laptop methods by
-further editing the source (see the 'sony_acpi_values' table, and add a new
+further editing the source (see the 'sony_nc_values' table, and add a new
 entry to this table with your get/set method names using the
-HANDLE_NAMES macro).
+SNC_HANDLE_NAMES macro).
 
 Your mission, should you accept it, is to try finding out what
 those entries are for, by reading/writing random values from/to those
@@ -87,6 +95,9 @@ files and find out what is the impact on your laptop.
 Should you find anything interesting, please report it back to me,
 I will not disavow all knowledge of your actions :)
 
+See also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers for other
+useful info.
+
 Bugs/Limitations:
 -----------------
 
diff --git a/Documentation/ibm-acpi.txt b/Documentation/thinkpad-acpi.txt
index 0132d363feb5..2d4803359a04 100644
--- a/Documentation/ibm-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -1,16 +1,22 @@
-                    IBM ThinkPad ACPI Extras Driver
+                     ThinkPad ACPI Extras Driver
 
-                            Version 0.12
-                           17 August 2005
+                            Version 0.14
+                          April 21st, 2007
 
                Borislav Deianov <borislav@users.sf.net>
+             Henrique de Moraes Holschuh <hmh@hmh.eng.br>
                       http://ibm-acpi.sf.net/
 
 
-This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports
-various features of these laptops which are accessible through the
-ACPI framework but not otherwise supported by the generic Linux ACPI
-drivers.
+This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
+supports various features of these laptops which are accessible
+through the ACPI and ACPI EC framework, but not otherwise fully
+supported by the generic Linux ACPI drivers.
+
+This driver used to be named ibm-acpi until kernel 2.6.21 and release
+0.13-20070314.  It used to be in the drivers/acpi tree, but it was
+moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
+2.6.22, and release 0.14.
 
 
 Status
@@ -21,7 +27,7 @@ detailed description):
 
         - Fn key combinations
         - Bluetooth enable and disable
-        - video output switching, expansion control     
+        - video output switching, expansion control
         - ThinkLight on and off
         - limited docking and undocking
         - UltraBay eject
@@ -32,7 +38,7 @@ detailed description):
         - Experimental: embedded controller register dump
         - LCD brightness control
         - Volume control
-        - Experimental: fan speed, fan enable/disable
+        - Fan control and monitoring: fan speed, fan enable/disable
         - Experimental: WAN enable and disable
 
 A compatibility table by model and feature is maintained on the web
@@ -42,6 +48,8 @@ Please include the following information in your report:
 
         - ThinkPad model name
         - a copy of your DSDT, from /proc/acpi/dsdt
+        - a copy of the output of dmidecode, with serial numbers
+          and UUIDs masked off
         - which driver features work and which don't
         - the observed behavior of non-working features
 
@@ -52,25 +60,85 @@ Installation
 ------------
 
 If you are compiling this driver as included in the Linux kernel
-sources, simply enable the CONFIG_ACPI_IBM option (Power Management /
-ACPI / IBM ThinkPad Laptop Extras).
+sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally
+enable the CONFIG_THINKPAD_ACPI_BAY option if you want the
+thinkpad-specific bay functionality.
 
 Features
 --------
 
-The driver creates the /proc/acpi/ibm directory. There is a file under
-that directory for each feature described below. Note that while the
-driver is still in the alpha stage, the exact proc file format and
-commands supported by the various features is guaranteed to change
-frequently.
+The driver exports two different interfaces to userspace, which can be
+used to access the features it provides.  One is a legacy procfs-based
+interface, which will be removed at some time in the distant future.
+The other is a new sysfs-based interface which is not complete yet.
 
-Driver version -- /proc/acpi/ibm/driver
----------------------------------------
+The procfs interface creates the /proc/acpi/ibm directory.  There is a
+file under that directory for each feature it supports.  The procfs
+interface is mostly frozen, and will change very little if at all: it
+will not be extended to add any new functionality in the driver, instead
+all new functionality will be implemented on the sysfs interface.
+
+The sysfs interface tries to blend in the generic Linux sysfs subsystems
+and classes as much as possible.  Since some of these subsystems are not
+yet ready or stabilized, it is expected that this interface will change,
+and any and all userspace programs must deal with it.
+
+
+Notes about the sysfs interface:
+
+Unlike what was done with the procfs interface, correctness when talking
+to the sysfs interfaces will be enforced, as will correctness in the
+thinkpad-acpi's implementation of sysfs interfaces.
+
+Also, any bugs in the thinkpad-acpi sysfs driver code or in the
+thinkpad-acpi's implementation of the sysfs interfaces will be fixed for
+maximum correctness, even if that means changing an interface in
+non-compatible ways.  As these interfaces mature both in the kernel and
+in thinkpad-acpi, such changes should become quite rare.
+
+Applications interfacing to the thinkpad-acpi sysfs interfaces must
+follow all sysfs guidelines and correctly process all errors (the sysfs
+interface makes extensive use of errors).  File descriptors and open /
+close operations to the sysfs inodes must also be properly implemented.
+
+The version of thinkpad-acpi's sysfs interface is exported by the driver
+as a driver attribute (see below).
+
+Sysfs driver attributes are on the driver's sysfs attribute space,
+for 2.6.20 this is /sys/bus/platform/drivers/thinkpad-acpi/.
+
+Sysfs device attributes are on the driver's sysfs attribute space,
+for 2.6.20 this is /sys/devices/platform/thinkpad-acpi/.
+
+Driver version
+--------------
+
+procfs: /proc/acpi/ibm/driver
+sysfs driver attribute: version
 
 The driver name and version. No commands can be written to this file.
 
-Hot keys -- /proc/acpi/ibm/hotkey
----------------------------------
+Sysfs interface version
+-----------------------
+
+sysfs driver attribute: interface_version
+
+Version of the thinkpad-acpi sysfs interface, as an unsigned long
+(output in hex format: 0xAAAABBCC), where:
+        AAAA - major revision
+        BB - minor revision
+        CC - bugfix revision
+
+The sysfs interface version changelog for the driver can be found at the
+end of this document.  Changes to the sysfs interface done by the kernel
+subsystems are not documented here, nor are they tracked by this
+attribute.
+
+Hot keys
+--------
+
+procfs: /proc/acpi/ibm/hotkey
+sysfs device attribute: hotkey/*
 
 Without this driver, only the Fn-F4 key (sleep button) generates an
 ACPI event. With the driver loaded, the hotkey feature enabled and the
@@ -84,15 +152,6 @@ All labeled Fn-Fx key combinations generate distinct events. In
 addition, the lid microswitch and some docking station buttons may
 also generate such events.
 
-The following commands can be written to this file:
-
-        echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
-        echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
-        echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
-        echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
-        ... any other 4-hex-digit mask ...
-        echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
-
 The bit mask allows some control over which hot keys generate ACPI
 events. Not all bits in the mask can be modified. Not all bits that
 can be modified do anything. Not all hot keys can be individually
@@ -124,15 +183,77 @@ buttons do not generate ACPI events even with this driver. They *can*
 be used through the "ThinkPad Buttons" utility, see
 http://www.nongnu.org/tpb/
 
-Bluetooth -- /proc/acpi/ibm/bluetooth
--------------------------------------
+procfs notes:
+
+The following commands can be written to the /proc/acpi/ibm/hotkey file:
+
+        echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
+        echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
+        echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
+        echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
+        ... any other 4-hex-digit mask ...
+        echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
+
+sysfs notes:
+
+        The hot keys attributes are in a hotkey/ subdirectory off the
+        thinkpad device.
+
+        bios_enabled:
+                Returns the status of the hot keys feature when
+                thinkpad-acpi was loaded.  Upon module unload, the hot
+                key feature status will be restored to this value.
+
+                0: hot keys were disabled
+                1: hot keys were enabled
+
+        bios_mask:
+                Returns the hot keys mask when thinkpad-acpi was loaded.
+                Upon module unload, the hot keys mask will be restored
+                to this value.
+
+        enable:
+                Enables/disables the hot keys feature, and reports
+                current status of the hot keys feature.
+
+                0: disables the hot keys feature / feature disabled
+                1: enables the hot keys feature / feature enabled
+
+        mask:
+                bit mask to enable ACPI event generation for each hot
+                key (see above).  Returns the current status of the hot
+                keys mask, and allows one to modify it.
+
 
-This feature shows the presence and current state of a Bluetooth
-device. If Bluetooth is installed, the following commands can be used:
+Bluetooth
+---------
+
+procfs: /proc/acpi/ibm/bluetooth
+sysfs device attribute: bluetooth/enable
+
+This feature shows the presence and current state of a ThinkPad
+Bluetooth device in the internal ThinkPad CDC slot.
+
+Procfs notes:
+
+If Bluetooth is installed, the following commands can be used:
 
         echo enable > /proc/acpi/ibm/bluetooth
         echo disable > /proc/acpi/ibm/bluetooth
 
+Sysfs notes:
+
+        If the Bluetooth CDC card is installed, it can be enabled /
+        disabled through the "bluetooth/enable" thinkpad-acpi device
+        attribute, and its current status can also be queried.
+
+        enable:
+                0: disables Bluetooth / Bluetooth is disabled
+                1: enables Bluetooth / Bluetooth is enabled.
+
+        Note: this interface will be probably be superseeded by the
+        generic rfkill class.
+
 Video output control -- /proc/acpi/ibm/video
 --------------------------------------------
 
@@ -209,7 +330,7 @@ hot plugging of devices in the Linux ACPI framework. If the laptop was
 booted while not in the dock, the following message is shown in the
 logs:
 
-        Mar 17 01:42:34 aero kernel: ibm_acpi: dock device not present
+        Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
 
 In this case, no dock-related events are generated but the dock and
 undock commands described below still work. They can be executed
@@ -269,7 +390,7 @@ This is due to the current lack of support for hot plugging of devices
 in the Linux ACPI framework. If the laptop was booted without the
 UltraBay, the following message is shown in the logs:
 
-        Mar 17 01:42:34 aero kernel: ibm_acpi: bay device not present
+        Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
 
 In this case, no bay-related events are generated but the eject
 command described below still works. It can be executed manually or
@@ -313,23 +434,19 @@ supported. Use "eject2" instead of "eject" for the second bay.
 Note: the UltraBay eject support on the 600e/x, A22p and A3x is
 EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
 
-CMOS control -- /proc/acpi/ibm/cmos
------------------------------------
+CMOS control
+------------
+
+procfs: /proc/acpi/ibm/cmos
+sysfs device attribute: cmos_command
 
 This feature is used internally by the ACPI firmware to control the
 ThinkLight on most newer ThinkPad models. It may also control LCD
 brightness, sounds volume and more, but only on some models.
 
-The commands are non-negative integer numbers:
-
-        echo 0 >/proc/acpi/ibm/cmos
-        echo 1 >/proc/acpi/ibm/cmos
-        echo 2 >/proc/acpi/ibm/cmos
-        ...
-
-The range of valid numbers is 0 to 21, but not all have an effect and
-the behavior varies from model to model. Here is the behavior on the
-X40 (tpb is the ThinkPad Buttons utility):
+The range of valid cmos command numbers is 0 to 21, but not all have an
+effect and the behavior varies from model to model.  Here is the behavior
+on the X40 (tpb is the ThinkPad Buttons utility):
 
         0 - no effect but tpb reports "Volume down"
         1 - no effect but tpb reports "Volume up"
@@ -342,6 +459,9 @@ X40 (tpb is the ThinkPad Buttons utility):
         13 - ThinkLight off
         14 - no effect but tpb reports ThinkLight status change
 
+The cmos command interface is prone to firmware split-brain problems, as
+in newer ThinkPads it is just a compatibility layer.
+
 LED control -- /proc/acpi/ibm/led
 ---------------------------------
 
@@ -393,17 +513,17 @@ X40:
         16 - one medium-pitched beep repeating constantly, stop with 17
         17 - stop 16
 
-Temperature sensors -- /proc/acpi/ibm/thermal
----------------------------------------------
+Temperature sensors
+-------------------
+
+procfs: /proc/acpi/ibm/thermal
+sysfs device attributes: (hwmon) temp*_input
 
 Most ThinkPads include six or more separate temperature sensors but
 only expose the CPU temperature through the standard ACPI methods.
 This feature shows readings from up to eight different sensors on older
 ThinkPads, and it has experimental support for up to sixteen different
-sensors on newer ThinkPads.  Readings from sensors that are not available
-return -128.
-
-No commands can be written to this file.
+sensors on newer ThinkPads.
 
 EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
 implementation directly accesses hardware registers and may not work as
@@ -460,6 +580,20 @@ The A31 has a very atypical layout for the thermal sensors
 8:  Bay Battery: secondary sensor
 
 
+Procfs notes:
+        Readings from sensors that are not available return -128.
+        No commands can be written to this file.
+
+Sysfs notes:
+        Sensors that are not available return the ENXIO error.  This
+        status may change at runtime, as there are hotplug thermal
+        sensors, like those inside the batteries and docks.
+
+        thinkpad-acpi thermal sensors are reported through the hwmon
+        subsystem, and follow all of the hwmon guidelines at
+        Documentation/hwmon.
+
+
 EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
 ------------------------------------------------------------------------
 
@@ -472,7 +606,7 @@ This feature dumps the values of 256 embedded controller
 registers. Values which have changed since the last time the registers
 were dumped are marked with a star:
 
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump 
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
 EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
 EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
 EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
@@ -503,7 +637,7 @@ vary. The second ensures that the fan-related values do vary, since
 the fan speed fluctuates a bit. The third will (hopefully) mark the
 fan register with a star:
 
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump 
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
 EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
 EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
 EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
@@ -533,19 +667,59 @@ registers contain the current battery capacity, etc. If you experiment
 with this, do send me your results (including some complete dumps with
 a description of the conditions when they were taken.)
 
-LCD brightness control -- /proc/acpi/ibm/brightness
----------------------------------------------------
+LCD brightness control
+----------------------
+
+procfs: /proc/acpi/ibm/brightness
+sysfs backlight device "thinkpad_screen"
 
 This feature allows software control of the LCD brightness on ThinkPad
-models which don't have a hardware brightness slider. The available
-commands are:
+models which don't have a hardware brightness slider.
+
+It has some limitations: the LCD backlight cannot be actually turned on or off
+by this interface, and in many ThinkPad models, the "dim while on battery"
+functionality will be enabled by the BIOS when this interface is used, and
+cannot be controlled.
+
+The backlight control has eight levels, ranging from 0 to 7.  Some of the
+levels may not be distinct.
+
+Procfs notes:
+
+        The available commands are:
 
         echo up   >/proc/acpi/ibm/brightness
         echo down >/proc/acpi/ibm/brightness
         echo 'level <level>' >/proc/acpi/ibm/brightness
 
-The <level> number range is 0 to 7, although not all of them may be
-distinct. The current brightness level is shown in the file.
+Sysfs notes:
+
+The interface is implemented through the backlight sysfs class, which is poorly
+documented at this time.
+
+Locate the thinkpad_screen device under /sys/class/backlight, and inside it
+there will be the following attributes:
+
+        max_brightness:
+                Reads the maximum brightness the hardware can be set to.
+                The minimum is always zero.
+
+        actual_brightness:
+                Reads what brightness the screen is set to at this instant.
+
+        brightness:
+                Writes request the driver to change brightness to the given
+                value.  Reads will tell you what brightness the driver is trying
+                to set the display to when "power" is set to zero and the display
+                has not been dimmed by a kernel power management event.
+
+        power:
+                power management mode, where 0 is "display on", and 1 to 3 will
+                dim the display backlight to brightness level 0 because
+                thinkpad-acpi cannot really turn the backlight off.  Kernel
+                power management events can temporarily increase the current
+                power management level, i.e. they can dim the display.
+
 
 Volume control -- /proc/acpi/ibm/volume
 ---------------------------------------
@@ -563,41 +737,42 @@ distinct. The unmute the volume after the mute command, use either the
 up or down command (the level command will not unmute the volume).
 The current volume level and mute state is shown in the file.
 
-EXPERIMENTAL: fan speed, fan enable/disable -- /proc/acpi/ibm/fan
------------------------------------------------------------------
+Fan control and monitoring: fan speed, fan enable/disable
+---------------------------------------------------------
 
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
+procfs: /proc/acpi/ibm/fan
+sysfs device attributes: (hwmon) fan_input, pwm1, pwm1_enable
+
+NOTE NOTE NOTE: fan control operations are disabled by default for
+safety reasons.  To enable them, the module parameter "fan_control=1"
+must be given to thinkpad-acpi.
 
 This feature attempts to show the current fan speed, control mode and
 other fan data that might be available.  The speed is read directly
 from the hardware registers of the embedded controller.  This is known
-to work on later R, T and X series ThinkPads but may show a bogus
+to work on later R, T, X and Z series ThinkPads but may show a bogus
 value on other models.
 
-Most ThinkPad fans work in "levels".  Level 0 stops the fan.  The higher
-the level, the higher the fan speed, although adjacent levels often map
-to the same fan speed.  7 is the highest level, where the fan reaches
-the maximum recommended speed.  Level "auto" means the EC changes the
-fan level according to some internal algorithm, usually based on
-readings from the thermal sensors.  Level "disengaged" means the EC
-disables the speed-locked closed-loop fan control, and drives the fan as
-fast as it can go, which might exceed hardware limits, so use this level
-with caution.
+Fan levels:
 
-The fan usually ramps up or down slowly from one speed to another,
-and it is normal for the EC to take several seconds to react to fan
-commands.
+Most ThinkPad fans work in "levels" at the firmware interface.  Level 0
+stops the fan.  The higher the level, the higher the fan speed, although
+adjacent levels often map to the same fan speed.  7 is the highest
+level, where the fan reaches the maximum recommended speed.
 
-The fan may be enabled or disabled with the following commands:
+Level "auto" means the EC changes the fan level according to some
+internal algorithm, usually based on readings from the thermal sensors.
 
-        echo enable  >/proc/acpi/ibm/fan
-        echo disable >/proc/acpi/ibm/fan
+There is also a "full-speed" level, also known as "disengaged" level.
+In this level, the EC disables the speed-locked closed-loop fan control,
+and drives the fan as fast as it can go, which might exceed hardware
+limits, so use this level with caution.
 
-Placing a fan on level 0 is the same as disabling it.  Enabling a fan
-will try to place it in a safe level if it is too slow or disabled.
+The fan usually ramps up or down slowly from one speed to another, and
+it is normal for the EC to take several seconds to react to fan
+commands.  The full-speed level may take up to two minutes to ramp up to
+maximum speed, and in some ThinkPads, the tachometer readings go stale
+while the EC is transitioning to the full-speed level.
 
 WARNING WARNING WARNING: do not leave the fan disabled unless you are
 monitoring all of the temperature sensor readings and you are ready to
@@ -615,46 +790,146 @@ fan is turned off when the CPU temperature drops to 49 degrees and the
 HDD temperature drops to 41 degrees.  These thresholds cannot
 currently be controlled.
 
+The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
+certain conditions are met.  It will override any fan programming done
+through thinkpad-acpi.
+
+The thinkpad-acpi kernel driver can be programmed to revert the fan
+level to a safe setting if userspace does not issue one of the procfs
+fan commands: "enable", "disable", "level" or "watchdog", or if there
+are no writes to pwm1_enable (or to pwm1 *if and only if* pwm1_enable is
+set to 1, manual mode) within a configurable amount of time of up to
+120 seconds.  This functionality is called fan safety watchdog.
+
+Note that the watchdog timer stops after it enables the fan.  It will be
+rearmed again automatically (using the same interval) when one of the
+above mentioned fan commands is received.  The fan watchdog is,
+therefore, not suitable to protect against fan mode changes made through
+means other than the "enable", "disable", and "level" procfs fan
+commands, or the hwmon fan control sysfs interface.
+
+Procfs notes:
+
+The fan may be enabled or disabled with the following commands:
+
+        echo enable  >/proc/acpi/ibm/fan
+        echo disable >/proc/acpi/ibm/fan
+
+Placing a fan on level 0 is the same as disabling it.  Enabling a fan
+will try to place it in a safe level if it is too slow or disabled.
+
 The fan level can be controlled with the command:
 
-        echo 'level <level>' > /proc/acpi/ibm/thermal
+        echo 'level <level>' > /proc/acpi/ibm/fan
 
-Where <level> is an integer from 0 to 7, or one of the words "auto"
-or "disengaged" (without the quotes).  Not all ThinkPads support the
-"auto" and "disengaged" levels.
+Where <level> is an integer from 0 to 7, or one of the words "auto" or
+"full-speed" (without the quotes).  Not all ThinkPads support the "auto"
+and "full-speed" levels.  The driver accepts "disengaged" as an alias for
+"full-speed", and reports it as "disengaged" for backwards
+compatibility.
 
 On the X31 and X40 (and ONLY on those models), the fan speed can be
-controlled to a certain degree. Once the fan is running, it can be
+controlled to a certain degree.  Once the fan is running, it can be
 forced to run faster or slower with the following command:
 
-        echo 'speed <speed>' > /proc/acpi/ibm/thermal
+        echo 'speed <speed>' > /proc/acpi/ibm/fan
 
-The sustainable range of fan speeds on the X40 appears to be from
-about 3700 to about 7350. Values outside this range either do not have
-any effect or the fan speed eventually settles somewhere in that
-range. The fan cannot be stopped or started with this command.
+The sustainable range of fan speeds on the X40 appears to be from about
+3700 to about 7350. Values outside this range either do not have any
+effect or the fan speed eventually settles somewhere in that range.  The
+fan cannot be stopped or started with this command.  This functionality
+is incomplete, and not available through the sysfs interface.
 
-The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
-certain conditions are met.  It will override any fan programming done
-through ibm-acpi.
+To program the safety watchdog, use the "watchdog" command.
 
-EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
----------------------------------------
+        echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
+
+If you want to disable the watchdog, use 0 as the interval.
+
+Sysfs notes:
+
+The sysfs interface follows the hwmon subsystem guidelines for the most
+part, and the exception is the fan safety watchdog.
+
+Writes to any of the sysfs attributes may return the EINVAL error if
+that operation is not supported in a given ThinkPad or if the parameter
+is out-of-bounds, and EPERM if it is forbidden.  They may also return
+EINTR (interrupted system call), and EIO (I/O error while trying to talk
+to the firmware).
+
+Features not yet implemented by the driver return ENOSYS.
+
+hwmon device attribute pwm1_enable:
+        0: PWM offline (fan is set to full-speed mode)
+        1: Manual PWM control (use pwm1 to set fan level)
+        2: Hardware PWM control (EC "auto" mode)
+        3: reserved (Software PWM control, not implemented yet)
+
+        Modes 0 and 2 are not supported by all ThinkPads, and the
+        driver is not always able to detect this.  If it does know a
+        mode is unsupported, it will return -EINVAL.
+
+hwmon device attribute pwm1:
+        Fan level, scaled from the firmware values of 0-7 to the hwmon
+        scale of 0-255.  0 means fan stopped, 255 means highest normal
+        speed (level 7).
+
+        This attribute only commands the fan if pmw1_enable is set to 1
+        (manual PWM control).
+
+hwmon device attribute fan1_input:
+        Fan tachometer reading, in RPM.  May go stale on certain
+        ThinkPads while the EC transitions the PWM to offline mode,
+        which can take up to two minutes.  May return rubbish on older
+        ThinkPads.
+
+driver attribute fan_watchdog:
+        Fan safety watchdog timer interval, in seconds.  Minimum is
+        1 second, maximum is 120 seconds.  0 disables the watchdog.
+
+To stop the fan: set pwm1 to zero, and pwm1_enable to 1.
+
+To start the fan in a safe mode: set pwm1_enable to 2.  If that fails
+with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
+would be the safest choice, though).
+
+
+EXPERIMENTAL: WAN
+-----------------
+
+procfs: /proc/acpi/ibm/wan
+sysfs device attribute: wwan/enable
 
 This feature is marked EXPERIMENTAL because the implementation
 directly accesses hardware registers and may not work as expected. USE
 WITH CAUTION! To use this feature, you need to supply the
 experimental=1 parameter when loading the module.
 
-This feature shows the presence and current state of a WAN (Sierra
-Wireless EV-DO) device. If WAN is installed, the following commands can
-be used:
+This feature shows the presence and current state of a W-WAN (Sierra
+Wireless EV-DO) device.
+
+It was tested on a Lenovo Thinkpad X60. It should probably work on other
+Thinkpad models which come with this module installed.
+
+Procfs notes:
+
+If the W-WAN card is installed, the following commands can be used:
 
         echo enable > /proc/acpi/ibm/wan
         echo disable > /proc/acpi/ibm/wan
 
-It was tested on a Lenovo Thinkpad X60. It should probably work on other
-Thinkpad models which come with this module installed.
+Sysfs notes:
+
+        If the W-WAN card is installed, it can be enabled /
+        disabled through the "wwan/enable" thinkpad-acpi device
+        attribute, and its current status can also be queried.
+
+        enable:
+                0: disables WWAN card / WWAN card is disabled
+                1: enables WWAN card / WWAN card is enabled.
+
+        Note: this interface will be probably be superseeded by the
+        generic rfkill class.
 
 Multiple Commands, Module Parameters
 ------------------------------------
@@ -665,64 +940,42 @@ separating them with commas, for example:
         echo enable,0xffff > /proc/acpi/ibm/hotkey
         echo lcd_disable,crt_enable > /proc/acpi/ibm/video
 
-Commands can also be specified when loading the ibm_acpi module, for
-example:
-
-        modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable
-
-The ibm-acpi kernel driver can be programmed to revert the fan level
-to a safe setting if userspace does not issue one of the fan commands:
-"enable", "disable", "level" or "watchdog" within a configurable
-ammount of time.  To do this, use the "watchdog" command.
-
-        echo 'watchdog <interval>' > /proc/acpi/ibm/fan
-
-Interval is the ammount of time in seconds to wait for one of the
-above mentioned fan commands before reseting the fan level to a safe
-one.  If set to zero, the watchdog is disabled (default).  When the
-watchdog timer runs out, it does the exact equivalent of the "enable"
-fan command.
-
-Note that the watchdog timer stops after it enables the fan.  It will
-be rearmed again automatically (using the same interval) when one of
-the above mentioned fan commands is received.  The fan watchdog is,
-therefore, not suitable to protect against fan mode changes made
-through means other than the "enable", "disable", and "level" fan
-commands.
-
-
-Example Configuration
----------------------
-
-The ACPI support in the kernel is intended to be used in conjunction
-with a user-space daemon, acpid. The configuration files for this
-daemon control what actions are taken in response to various ACPI
-events. An example set of configuration files are included in the
-config/ directory of the tarball package available on the web
-site. Note that these are provided for illustration purposes only and
-may need to be adapted to your particular setup.
-
-The following utility scripts are used by the example action
-scripts (included with ibm-acpi for completeness):
-
-        /usr/local/sbin/idectl -- from the hdparm source distribution,
-                see http://www.ibiblio.org/pub/Linux/system/hardware
-        /usr/local/sbin/laptop_mode -- from the Linux kernel source
-                distribution, see Documentation/laptop-mode.txt
-        /sbin/service -- comes with Redhat/Fedora distributions
-        /usr/sbin/hibernate -- from the Software Suspend 2 distribution,
-                see http://softwaresuspend.berlios.de/
-
-Toan T Nguyen <ntt@physics.ucla.edu> notes that Suse uses the
-powersave program to suspend ('powersave --suspend-to-ram') or
-hibernate ('powersave --suspend-to-disk'). This means that the
-hibernate script is not needed on that distribution.
-
-Henrik Brix Andersen <brix@gentoo.org> has written a Gentoo ACPI event
-handler script for the X31. You can get the latest version from
-http://dev.gentoo.org/~brix/files/x31.sh
-
-David Schweikert <dws@ee.eth.ch> has written an alternative blank.sh
-script which works on Debian systems. This scripts has now been
-extended to also work on Fedora systems and included as the default
-blank.sh in the distribution.
+Commands can also be specified when loading the thinkpad-acpi module,
+for example:
+
+        modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
+
+Enabling debugging output
+-------------------------
+
+The module takes a debug paramater which can be used to selectively
+enable various classes of debugging output, for example:
+
+         modprobe ibm_acpi debug=0xffff
+
+will enable all debugging output classes.  It takes a bitmask, so
+to enable more than one output class, just add their values.
+
+        Debug bitmask           Description
+        0x0001                  Initialization and probing
+        0x0002                  Removal
+
+There is also a kernel build option to enable more debugging
+information, which may be necessary to debug driver problems.
+
+The level of debugging information output by the driver can be changed
+at runtime through sysfs, using the driver attribute debug_level.  The
+attribute takes the same bitmask as the debug module parameter above.
+
+Force loading of module
+-----------------------
+
+If thinkpad-acpi refuses to detect your ThinkPad, you can try to specify
+the module parameter force_load=1.  Regardless of whether this works or
+not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
+
+
+Sysfs interface changelog:
+
+0x000100:       Initial sysfs support, as a single platform driver and
+                device.
diff --git a/Documentation/video4linux/meye.txt b/Documentation/video4linux/meye.txt
index ecb34160e61d..5e51c59bf2b0 100644
--- a/Documentation/video4linux/meye.txt
+++ b/Documentation/video4linux/meye.txt
@@ -5,10 +5,9 @@ Vaio Picturebook Motion Eye Camera Driver Readme
         Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
 
 This driver enable the use of video4linux compatible applications with the
-Motion Eye camera. This driver requires the "Sony Vaio Programmable I/O
-Control Device" driver (which can be found in the "Character drivers"
-section of the kernel configuration utility) to be compiled and installed
-(using its "camera=1" parameter).
+Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which
+can be found in the "Misc devices" section of the kernel configuration utility)
+to be compiled and installed (using its "camera=1" parameter).
 
 It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 277877a34ef6..d0243d07da20 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1632,15 +1632,6 @@ W:	http://www.ia64-linux.org/
 T:      git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
 S:      Maintained
 
-IBM ACPI EXTRAS DRIVER
-P:      Henrique de Moraes Holschuh
-M:      ibm-acpi@hmh.eng.br
-L:      ibm-acpi-devel@lists.sourceforge.net
-W:      http://ibm-acpi.sourceforge.net
-W:      http://thinkwiki.org/wiki/Ibm-acpi
-T:      git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
-S:      Maintained
-
 SN-IA64 (Itanium) SUB-PLATFORM
 P:      Jes Sorensen
 M:      jes@sgi.com
@@ -3121,6 +3112,15 @@ P:	Chris Zankel
 M:      chris@zankel.net
 S:      Maintained
 
+THINKPAD ACPI EXTRAS DRIVER
+P:      Henrique de Moraes Holschuh
+M:      ibm-acpi@hmh.eng.br
+L:      ibm-acpi-devel@lists.sourceforge.net
+W:      http://ibm-acpi.sourceforge.net
+W:      http://thinkwiki.org/wiki/Ibm-acpi
+T:      git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
+S:      Maintained
+
 UltraSPARC (sparc64):
 P:      David S. Miller
 M:      davem@davemloft.net
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
index a7d22d9f3d7e..8f7efd38254d 100644
--- a/arch/i386/kernel/acpi/earlyquirk.c
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -23,10 +23,13 @@ static int __init nvidia_hpet_check(struct acpi_table_header *header)
 static int __init check_bridge(int vendor, int device)
 {
 #ifdef CONFIG_ACPI
+        static int warned;
         /* According to Nvidia all timer overrides are bogus unless HPET
            is enabled. */
         if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) {
-                if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
+                if (!warned && acpi_table_parse(ACPI_SIG_HPET,
+                                                nvidia_hpet_check)) {
+                        warned = 1;
                         acpi_skip_timer_override = 1;
                           printk(KERN_INFO "Nvidia board "
                        "detected. Ignoring ACPI "
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index e2ce4a9c1c92..139f41f033d8 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -85,8 +85,8 @@ config ACPI_PROCFS
         depends on ACPI
         default y
         ---help---
-          Procfs interface for ACPI is made optional for back-compatible.
-          As the same functions are duplicated in sysfs interface
+          The Procfs interface for ACPI is made optional for backward compatibility.
+          As the same functions are duplicated in the sysfs interface
           and this proc interface will be removed some time later,
           it's marked as deprecated.
           ( /proc/acpi/debug_layer && debug_level are deprecated by
@@ -218,43 +218,6 @@ config ACPI_ASUS
           NOTE: This driver is deprecated and will probably be removed soon,
           use asus-laptop instead.
 
-config ACPI_IBM
-        tristate "IBM ThinkPad Laptop Extras"
-        depends on X86
-        select BACKLIGHT_CLASS_DEVICE
-        ---help---
-          This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
-          support for Fn-Fx key combinations, Bluetooth control, video
-          output switching, ThinkLight control, UltraBay eject and more.
-          For more information about this driver see <file:Documentation/ibm-acpi.txt>
-          and <http://ibm-acpi.sf.net/> .
-
-          If you have an IBM ThinkPad laptop, say Y or M here.
-
-config ACPI_IBM_DOCK
-        bool "Legacy Docking Station Support"
-        depends on ACPI_IBM
-        depends on ACPI_DOCK=n
-        default n
-        ---help---
-          Allows the ibm_acpi driver to handle docking station events.
-          This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI.  It will
-          allow locking and removing the laptop from the docking station,
-          but will not properly connect PCI devices.
-
-          If you are not sure, say N here.
-
-config ACPI_IBM_BAY
-        bool "Legacy Removable Bay Support"
-        depends on ACPI_IBM
-        default y
-        ---help---
-          Allows the ibm_acpi driver to handle removable bays.  It will allow
-          disabling the device in the bay, and also generate notifications when
-          the bay lever is ejected or inserted.
-
-          If you are not sure, say Y here.
-
 config ACPI_TOSHIBA
         tristate "Toshiba Laptop Extras"
         depends on X86
@@ -388,11 +351,10 @@ config ACPI_HOTPLUG_MEMORY
 
 config ACPI_SBS
         tristate "Smart Battery System (EXPERIMENTAL)"
-        depends on X86 && I2C
+        depends on X86
         depends on EXPERIMENTAL
         help
           This driver adds support for the Smart Battery System.
-          Depends on I2C (Device Drivers ---> I2C support)
           A "Smart Battery" is quite old and quite rare compared
           to today's ACPI "Control Method" battery.
 
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5956e9f64a8b..d4336f1730e9 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -1,6 +1,6 @@
 #
 # Makefile for the Linux ACPI interpreter
-# 
+#
 
 export ACPI_CFLAGS
 
@@ -32,16 +32,17 @@ obj-y				+= osl.o utils.o \
 processor-objs  += processor_core.o processor_throttling.o \
                                 processor_idle.o processor_thermal.o
 ifdef CONFIG_CPU_FREQ
-processor-objs  += processor_perflib.o                  
+processor-objs  += processor_perflib.o
 endif
 
 obj-y                           += sleep/
 obj-y                           += bus.o glue.o
 obj-y                           += scan.o
+# Keep EC driver first. Initialization of others depend on it.
+obj-$(CONFIG_ACPI_EC)           += ec.o
 obj-$(CONFIG_ACPI_AC)           += ac.o
 obj-$(CONFIG_ACPI_BATTERY)      += battery.o
 obj-$(CONFIG_ACPI_BUTTON)       += button.o
-obj-$(CONFIG_ACPI_EC)           += ec.o
 obj-$(CONFIG_ACPI_FAN)          += fan.o
 obj-$(CONFIG_ACPI_DOCK)         += dock.o
 obj-$(CONFIG_ACPI_BAY)          += bay.o
@@ -55,8 +56,7 @@ obj-$(CONFIG_ACPI_SYSTEM)	+= system.o event.o
 obj-$(CONFIG_ACPI_DEBUG)        += debug.o
 obj-$(CONFIG_ACPI_NUMA)         += numa.o
 obj-$(CONFIG_ACPI_ASUS)         += asus_acpi.o
-obj-$(CONFIG_ACPI_IBM)          += ibm_acpi.o
 obj-$(CONFIG_ACPI_TOSHIBA)      += toshiba_acpi.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)       += acpi_memhotplug.o
 obj-y                           += cm_sbs.o
-obj-$(CONFIG_ACPI_SBS)          += i2c_ec.o sbs.o
+obj-$(CONFIG_ACPI_SBS)          += sbs.o
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index c26172671fd8..e65628a03085 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -44,11 +44,6 @@ MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
 MODULE_DESCRIPTION("Hotplug Mem Driver");
 MODULE_LICENSE("GPL");
 
-/* ACPI _STA method values */
-#define ACPI_MEMORY_STA_PRESENT         (0x00000001UL)
-#define ACPI_MEMORY_STA_ENABLED         (0x00000002UL)
-#define ACPI_MEMORY_STA_FUNCTIONAL      (0x00000008UL)
-
 /* Memory Device States */
 #define MEMORY_INVALID_STATE    0
 #define MEMORY_POWER_ON_STATE   1
@@ -204,9 +199,9 @@ static int acpi_memory_check_device(struct acpi_memory_device *mem_device)
          * Check for device status. Device should be
          * present/enabled/functioning.
          */
-        if (!((current_status & ACPI_MEMORY_STA_PRESENT)
-              && (current_status & ACPI_MEMORY_STA_ENABLED)
-              && (current_status & ACPI_MEMORY_STA_FUNCTIONAL)))
+        if (!((current_status & ACPI_STA_DEVICE_PRESENT)
+              && (current_status & ACPI_STA_DEVICE_ENABLED)
+              && (current_status & ACPI_STA_DEVICE_FUNCTIONING)))
                 return -ENODEV;
 
         return 0;
@@ -286,7 +281,7 @@ static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
                 return -ENODEV;
 
         /* Check for device status.  Device should be disabled */
-        if (current_status & ACPI_MEMORY_STA_ENABLED)
+        if (current_status & ACPI_STA_DEVICE_ENABLED)
                 return -EINVAL;
 
         return 0;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index dd49ea0d0ed3..e5084ececb6f 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -103,7 +103,9 @@ int acpi_bus_get_status(struct acpi_device *device)
         else if (device->parent)
                 device->status = device->parent->status;
         else
-                STRUCT_TO_INT(device->status) = 0x0F;
+                STRUCT_TO_INT(device->status) =
+                    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+                    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
 
         if (device->status.functional && !device->status.present) {
                 printk(KERN_WARNING PREFIX "Device [%s] status [%08x]: "
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 0930d9413dfa..0dd3bf7c0ed1 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -49,8 +49,6 @@ MODULE_AUTHOR("Anil S Keshavamurthy");
 MODULE_DESCRIPTION("ACPI container driver");
 MODULE_LICENSE("GPL");
 
-#define ACPI_STA_PRESENT                (0x00000001)
-
 static int acpi_container_add(struct acpi_device *device);
 static int acpi_container_remove(struct acpi_device *device, int type);
 
@@ -75,13 +73,13 @@ static int is_device_present(acpi_handle handle)
 
         status = acpi_get_handle(handle, "_STA", &temp);
         if (ACPI_FAILURE(status))
-                return 1;       /* _STA not found, assmue device present */
+                return 1;       /* _STA not found, assume device present */
 
         status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
         if (ACPI_FAILURE(status))
                 return 0;       /* Firmware error */
 
-        return ((sta & ACPI_STA_PRESENT) == ACPI_STA_PRESENT);
+        return ((sta & ACPI_STA_DEVICE_PRESENT) == ACPI_STA_DEVICE_PRESENT);
 }
 
 /*******************************************************************/
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 54a697f9aa18..4546bf873aea 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -29,6 +29,7 @@
 #include <linux/notifier.h>
 #include <linux/platform_device.h>
 #include <linux/jiffies.h>
+#include <linux/stddef.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -667,6 +668,23 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
 }
 DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock);
 
+/*
+ * show_dock_uid - read method for "uid" file in sysfs
+ */
+static ssize_t show_dock_uid(struct device *dev,
+                             struct device_attribute *attr, char *buf)
+{
+        unsigned long lbuf;
+        acpi_status status = acpi_evaluate_integer(dock_station->handle, "_UID", NULL, &lbuf);
+        if(ACPI_FAILURE(status)) {
+            return 0;
+        }
+        return snprintf(buf, PAGE_SIZE, "%lx\n", lbuf);
+}
+DEVICE_ATTR(uid, S_IRUGO, show_dock_uid, NULL);
+
+
+
 /**
  * dock_add - add a new dock station
  * @handle: the dock station handle
@@ -715,6 +733,13 @@ static int dock_add(acpi_handle handle)
                 kfree(dock_station);
                 return ret;
         }
+        ret = device_create_file(&dock_device.dev, &dev_attr_uid);
+        if (ret) {
+                printk("Error %d adding sysfs file\n", ret);
+                platform_device_unregister(&dock_device);
+                kfree(dock_station);
+                return ret;
+        }
 
         /* Find dependent devices */
         acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a802962ff2b4..e08cf98f504f 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1,6 +1,8 @@
 /*
- *  acpi_ec.c - ACPI Embedded Controller Driver ($Revision: 38 $)
+ *  ec.c - ACPI Embedded Controller Driver (v2.0)
  *
+ *  Copyright (C) 2006, 2007 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
+ *  Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
  *  Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -91,9 +93,9 @@ static struct acpi_driver acpi_ec_driver = {
 };
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
+/* External interfaces use first EC only, so remember */
 static struct acpi_ec {
         acpi_handle handle;
-        unsigned long uid;
         unsigned long gpe;
         unsigned long command_addr;
         unsigned long data_addr;
@@ -101,12 +103,8 @@ static struct acpi_ec {
         struct mutex lock;
         atomic_t query_pending;
         atomic_t event_count;
-        atomic_t leaving_burst; /* 0 : No, 1 : Yes, 2: abort */
         wait_queue_head_t wait;
-} *ec_ecdt;
-
-/* External interfaces use first EC only, so remember */
-static struct acpi_device *first_ec;
+} *boot_ec, *first_ec;
 
 /* --------------------------------------------------------------------------
                              Transaction Management
@@ -173,56 +171,6 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, unsigned count)
         return -ETIME;
 }
 
-#ifdef ACPI_FUTURE_USAGE
-/*
- * Note: samsung nv5000 doesn't work with ec burst mode.
- * http://bugzilla.kernel.org/show_bug.cgi?id=4980
- */
-int acpi_ec_enter_burst_mode(struct acpi_ec *ec)
-{
-        u8 tmp = 0;
-        u8 status = 0;
-
-        status = acpi_ec_read_status(ec);
-        if (status != -EINVAL && !(status & ACPI_EC_FLAG_BURST)) {
-                status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
-                if (status)
-                        goto end;
-                acpi_ec_write_cmd(ec, ACPI_EC_BURST_ENABLE);
-                status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1);
-                tmp = acpi_ec_read_data(ec);
-                if (tmp != 0x90) {      /* Burst ACK byte */
-                        return -EINVAL;
-                }
-        }
-
-        atomic_set(&ec->leaving_burst, 0);
-        return 0;
-      end:
-        ACPI_EXCEPTION((AE_INFO, status, "EC wait, burst mode"));
-        return -1;
-}
-
-int acpi_ec_leave_burst_mode(struct acpi_ec *ec)
-{
-        u8 status = 0;
-
-        status = acpi_ec_read_status(ec);
-        if (status != -EINVAL && (status & ACPI_EC_FLAG_BURST)) {
-                status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
-                if (status)
-                        goto end;
-                acpi_ec_write_cmd(ec, ACPI_EC_BURST_DISABLE);
-                acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
-        }
-        atomic_set(&ec->leaving_burst, 1);
-        return 0;
-      end:
-        ACPI_EXCEPTION((AE_INFO, status, "EC leave burst mode"));
-        return -1;
-}
-#endif                          /* ACPI_FUTURE_USAGE */
-
 static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
                                         const u8 * wdata, unsigned wdata_len,
                                         u8 * rdata, unsigned rdata_len)
@@ -312,6 +260,21 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
         return status;
 }
 
+/*
+ * Note: samsung nv5000 doesn't work with ec burst mode.
+ * http://bugzilla.kernel.org/show_bug.cgi?id=4980
+ */
+int acpi_ec_burst_enable(struct acpi_ec *ec)
+{
+        u8 d;
+        return acpi_ec_transaction(ec, ACPI_EC_BURST_ENABLE, NULL, 0, &d, 1);
+}
+
+int acpi_ec_burst_disable(struct acpi_ec *ec)
+{
+        return acpi_ec_transaction(ec, ACPI_EC_BURST_DISABLE, NULL, 0, NULL, 0);
+}
+
 static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
 {
         int result;
@@ -333,18 +296,33 @@ static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data)
 /*
  * Externally callable EC access functions. For now, assume 1 EC only
  */
+int ec_burst_enable(void)
+{
+        if (!first_ec)
+                return -ENODEV;
+        return acpi_ec_burst_enable(first_ec);
+}
+
+EXPORT_SYMBOL(ec_burst_enable);
+
+int ec_burst_disable(void)
+{
+        if (!first_ec)
+                return -ENODEV;
+        return acpi_ec_burst_disable(first_ec);
+}
+
+EXPORT_SYMBOL(ec_burst_disable);
+
 int ec_read(u8 addr, u8 * val)
 {
-        struct acpi_ec *ec;
         int err;
         u8 temp_data;
 
         if (!first_ec)
                 return -ENODEV;
 
-        ec = acpi_driver_data(first_ec);
-
-        err = acpi_ec_read(ec, addr, &temp_data);
+        err = acpi_ec_read(first_ec, addr, &temp_data);
 
         if (!err) {
                 *val = temp_data;
@@ -357,15 +335,12 @@ EXPORT_SYMBOL(ec_read);
 
 int ec_write(u8 addr, u8 val)
 {
-        struct acpi_ec *ec;
         int err;
 
         if (!first_ec)
                 return -ENODEV;
 
-        ec = acpi_driver_data(first_ec);
-
-        err = acpi_ec_write(ec, addr, val);
+        err = acpi_ec_write(first_ec, addr, val);
 
         return err;
 }
@@ -376,14 +351,10 @@ int ec_transaction(u8 command,
                    const u8 * wdata, unsigned wdata_len,
                    u8 * rdata, unsigned rdata_len)
 {
-        struct acpi_ec *ec;
-
         if (!first_ec)
                 return -ENODEV;
 
-        ec = acpi_driver_data(first_ec);
-
-        return acpi_ec_transaction(ec, command, wdata,
+        return acpi_ec_transaction(first_ec, command, wdata,
                                    wdata_len, rdata, rdata_len);
 }
 
@@ -420,7 +391,7 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
 
 static void acpi_ec_gpe_query(void *ec_cxt)
 {
-        struct acpi_ec *ec = (struct acpi_ec *)ec_cxt;
+        struct acpi_ec *ec = ec_cxt;
         u8 value = 0;
         char object_name[8];
 
@@ -438,8 +409,9 @@ static u32 acpi_ec_gpe_handler(void *data)
 {
         acpi_status status = AE_OK;
         u8 value;
-        struct acpi_ec *ec = (struct acpi_ec *)data;
+        struct acpi_ec *ec = data;
         atomic_inc(&ec->event_count);
+
         if (acpi_ec_mode == EC_INTR) {
                 wake_up(&ec->wait);
         }
@@ -482,7 +454,7 @@ acpi_ec_space_handler(u32 function,
                       void *handler_context, void *region_context)
 {
         int result = 0;
-        struct acpi_ec *ec = NULL;
+        struct acpi_ec *ec = handler_context;
         u64 temp = *value;
         acpi_integer f_v = 0;
         int i = 0;
@@ -494,8 +466,6 @@ acpi_ec_space_handler(u32 function,
                 return AE_BAD_PARAMETER;
         }
 
-        ec = (struct acpi_ec *)handler_context;
-
       next_byte:
         switch (function) {
         case ACPI_READ:
@@ -551,18 +521,16 @@ static struct proc_dir_entry *acpi_ec_dir;
 
 static int acpi_ec_read_info(struct seq_file *seq, void *offset)
 {
-        struct acpi_ec *ec = (struct acpi_ec *)seq->private;
+        struct acpi_ec *ec = seq->private;
 
         if (!ec)
                 goto end;
 
-        seq_printf(seq, "gpe:                 0x%02x\n", (u32) ec->gpe);
-        seq_printf(seq, "ports:                   0x%02x, 0x%02x\n",
-                   (u32) ec->command_addr, (u32) ec->data_addr);
-        seq_printf(seq, "use global lock:         %s\n",
+        seq_printf(seq, "gpe:\t\t\t0x%02x\n", (u32) ec->gpe);
+        seq_printf(seq, "ports:\t\t\t0x%02x, 0x%02x\n",
+                   (unsigned)ec->command_addr, (unsigned)ec->data_addr);
+        seq_printf(seq, "use global lock:\t%s\n",
                    ec->global_lock ? "yes" : "no");
-        acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
-
       end:
         return 0;
 }
@@ -619,154 +587,122 @@ static int acpi_ec_remove_fs(struct acpi_device *device)
 /* --------------------------------------------------------------------------
                                Driver Interface
    -------------------------------------------------------------------------- */
+static acpi_status
+ec_parse_io_ports(struct acpi_resource *resource, void *context);
+
+static acpi_status
+ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval);
+
+static struct acpi_ec *make_acpi_ec(void)
+{
+        struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+        if (!ec)
+                return NULL;
+
+        atomic_set(&ec->query_pending, 1);
+        atomic_set(&ec->event_count, 1);
+        mutex_init(&ec->lock);
+        init_waitqueue_head(&ec->wait);
+
+        return ec;
+}
 
 static int acpi_ec_add(struct acpi_device *device)
 {
-        int result = 0;
         acpi_status status = AE_OK;
         struct acpi_ec *ec = NULL;
 
         if (!device)
                 return -EINVAL;
 
-        ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
-        if (!ec)
-                return -ENOMEM;
-
-        ec->handle = device->handle;
-        ec->uid = -1;
-        mutex_init(&ec->lock);
-        atomic_set(&ec->query_pending, 0);
-        atomic_set(&ec->event_count, 1);
-        if (acpi_ec_mode == EC_INTR) {
-                atomic_set(&ec->leaving_burst, 1);
-                init_waitqueue_head(&ec->wait);
-        }
         strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
         strcpy(acpi_device_class(device), ACPI_EC_CLASS);
-        acpi_driver_data(device) = ec;
-
-        /* Use the global lock for all EC transactions? */
-        acpi_evaluate_integer(ec->handle, "_GLK", NULL, &ec->global_lock);
-
-        /* XXX we don't test uids, because on some boxes ecdt uid = 0, see:
-           http://bugzilla.kernel.org/show_bug.cgi?id=6111 */
-        if (ec_ecdt) {
-                acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
-                                                  ACPI_ADR_SPACE_EC,
-                                                  &acpi_ec_space_handler);
 
-                acpi_remove_gpe_handler(NULL, ec_ecdt->gpe,
-                                        &acpi_ec_gpe_handler);
+        ec = make_acpi_ec();
+        if (!ec)
+                return -ENOMEM;
 
-                kfree(ec_ecdt);
+        status = ec_parse_device(device->handle, 0, ec, NULL);
+        if (status != AE_CTRL_TERMINATE) {
+                kfree(ec);
+                return -EINVAL;
         }
 
-        /* Get GPE bit assignment (EC events). */
-        /* TODO: Add support for _GPE returning a package */
-        status = acpi_evaluate_integer(ec->handle, "_GPE", NULL, &ec->gpe);
-        if (ACPI_FAILURE(status)) {
-                ACPI_EXCEPTION((AE_INFO, status,
-                                "Obtaining GPE bit assignment"));
-                result = -ENODEV;
-                goto end;
-        }
+        /* Check if we found the boot EC */
+        if (boot_ec) {
+                if (boot_ec->gpe == ec->gpe) {
+                        /* We might have incorrect info for GL at boot time */
+                        mutex_lock(&boot_ec->lock);
+                        boot_ec->global_lock = ec->global_lock;
+                        mutex_unlock(&boot_ec->lock);
+                        kfree(ec);
+                        ec = boot_ec;
+                }
+        } else
+                first_ec = ec;
+        ec->handle = device->handle;
+        acpi_driver_data(device) = ec;
 
-        result = acpi_ec_add_fs(device);
-        if (result)
-                goto end;
+        acpi_ec_add_fs(device);
 
         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s [%s] (gpe %d) interrupt mode.",
                           acpi_device_name(device), acpi_device_bid(device),
                           (u32) ec->gpe));
 
-        if (!first_ec)
-                first_ec = device;
-
-      end:
-        if (result)
-                kfree(ec);
-
-        return result;
+        return 0;
 }
 
 static int acpi_ec_remove(struct acpi_device *device, int type)
 {
-        struct acpi_ec *ec = NULL;
+        struct acpi_ec *ec;
 
         if (!device)
                 return -EINVAL;
 
         ec = acpi_driver_data(device);
-
         acpi_ec_remove_fs(device);
+        acpi_driver_data(device) = NULL;
+        if (ec == first_ec)
+                first_ec = NULL;
 
-        kfree(ec);
-
+        /* Don't touch boot EC */
+        if (boot_ec != ec)
+                kfree(ec);
         return 0;
 }
 
 static acpi_status
-acpi_ec_io_ports(struct acpi_resource *resource, void *context)
+ec_parse_io_ports(struct acpi_resource *resource, void *context)
 {
-        struct acpi_ec *ec = (struct acpi_ec *)context;
+        struct acpi_ec *ec = context;
 
-        if (resource->type != ACPI_RESOURCE_TYPE_IO) {
+        if (resource->type != ACPI_RESOURCE_TYPE_IO)
                 return AE_OK;
-        }
 
         /*
          * The first address region returned is the data port, and
          * the second address region returned is the status/command
          * port.
          */
-        if (ec->data_addr == 0) {
+        if (ec->data_addr == 0)
                 ec->data_addr = resource->data.io.minimum;
-        } else if (ec->command_addr == 0) {
+        else if (ec->command_addr == 0)
                 ec->command_addr = resource->data.io.minimum;
-        } else {
+        else
                 return AE_CTRL_TERMINATE;
-        }
 
         return AE_OK;
 }
 
-static int acpi_ec_start(struct acpi_device *device)
+static int ec_install_handlers(struct acpi_ec *ec)
 {
-        acpi_status status = AE_OK;
-        struct acpi_ec *ec = NULL;
-
-        if (!device)
-                return -EINVAL;
-
-        ec = acpi_driver_data(device);
-
-        if (!ec)
-                return -EINVAL;
-
-        /*
-         * Get I/O port addresses. Convert to GAS format.
-         */
-        status = acpi_walk_resources(ec->handle, METHOD_NAME__CRS,
-                                     acpi_ec_io_ports, ec);
-        if (ACPI_FAILURE(status) || ec->command_addr == 0) {
-                ACPI_EXCEPTION((AE_INFO, status,
-                                "Error getting I/O port addresses"));
-                return -ENODEV;
-        }
-
-        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
-                          ec->gpe, ec->command_addr, ec->data_addr));
-
-        /*
-         * Install GPE handler
-         */
+        acpi_status status;
         status = acpi_install_gpe_handler(NULL, ec->gpe,
                                           ACPI_GPE_EDGE_TRIGGERED,
                                           &acpi_ec_gpe_handler, ec);
-        if (ACPI_FAILURE(status)) {
+        if (ACPI_FAILURE(status))
                 return -ENODEV;
-        }
+
         acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
         acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
 
@@ -779,18 +715,49 @@ static int acpi_ec_start(struct acpi_device *device)
                 return -ENODEV;
         }
 
-        return AE_OK;
+        /* EC is fully operational, allow queries */
+        atomic_set(&ec->query_pending, 0);
+
+        return 0;
+}
+
+static int acpi_ec_start(struct acpi_device *device)
+{
+        struct acpi_ec *ec;
+
+        if (!device)
+                return -EINVAL;
+
+        ec = acpi_driver_data(device);
+
+        if (!ec)
+                return -EINVAL;
+
+        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
+                          ec->gpe, ec->command_addr, ec->data_addr));
+
+        /* Boot EC is already working */
+        if (ec == boot_ec)
+                return 0;
+
+        return ec_install_handlers(ec);
 }
 
 static int acpi_ec_stop(struct acpi_device *device, int type)
 {
-        acpi_status status = AE_OK;
-        struct acpi_ec *ec = NULL;
+        acpi_status status;
+        struct acpi_ec *ec;
 
         if (!device)
                 return -EINVAL;
 
         ec = acpi_driver_data(device);
+        if (!ec)
+                return -EINVAL;
+
+        /* Don't touch boot EC */
+        if (ec == boot_ec)
+                return 0;
 
         status = acpi_remove_address_space_handler(ec->handle,
                                                    ACPI_ADR_SPACE_EC,
@@ -805,164 +772,67 @@ static int acpi_ec_stop(struct acpi_device *device, int type)
         return 0;
 }
 
-static acpi_status __init
-acpi_fake_ecdt_callback(acpi_handle handle,
-                        u32 Level, void *context, void **retval)
+static acpi_status
+ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
 {
         acpi_status status;
 
-        mutex_init(&ec_ecdt->lock);
-        atomic_set(&ec_ecdt->event_count, 1);
-        if (acpi_ec_mode == EC_INTR) {
-                init_waitqueue_head(&ec_ecdt->wait);
-        }
+        struct acpi_ec *ec = context;
         status = acpi_walk_resources(handle, METHOD_NAME__CRS,
-                                     acpi_ec_io_ports, ec_ecdt);
+                                     ec_parse_io_ports, ec);
         if (ACPI_FAILURE(status))
                 return status;
 
-        ec_ecdt->uid = -1;
-        acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->uid);
-
-        status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->gpe);
+        /* Get GPE bit assignment (EC events). */
+        /* TODO: Add support for _GPE returning a package */
+        status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe);
         if (ACPI_FAILURE(status))
                 return status;
-        ec_ecdt->global_lock = TRUE;
-        ec_ecdt->handle = handle;
-
-        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
-                          ec_ecdt->gpe, ec_ecdt->command_addr,
-                          ec_ecdt->data_addr));
 
-        return AE_CTRL_TERMINATE;
-}
-
-/*
- * Some BIOS (such as some from Gateway laptops) access EC region very early
- * such as in BAT0._INI or EC._INI before an EC device is found and
- * do not provide an ECDT. According to ACPI spec, ECDT isn't mandatorily
- * required, but if EC regison is accessed early, it is required.
- * The routine tries to workaround the BIOS bug by pre-scan EC device
- * It assumes that _CRS, _HID, _GPE, _UID methods of EC don't touch any
- * op region (since _REG isn't invoked yet). The assumption is true for
- * all systems found.
- */
-static int __init acpi_ec_fake_ecdt(void)
-{
-        acpi_status status;
-        int ret = 0;
+        /* Use the global lock for all EC transactions? */
+        acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
 
-        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Try to make an fake ECDT"));
+        ec->handle = handle;
 
-        ec_ecdt = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
-        if (!ec_ecdt) {
-                ret = -ENOMEM;
-                goto error;
-        }
+        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
+                          ec->gpe, ec->command_addr, ec->data_addr));
 
-        status = acpi_get_devices(ACPI_EC_HID,
-                                  acpi_fake_ecdt_callback, NULL, NULL);
-        if (ACPI_FAILURE(status)) {
-                kfree(ec_ecdt);
-                ec_ecdt = NULL;
-                ret = -ENODEV;
-                ACPI_EXCEPTION((AE_INFO, status, "Can't make an fake ECDT"));
-                goto error;
-        }
-        return 0;
-      error:
-        return ret;
+        return AE_CTRL_TERMINATE;
 }
 
-static int __init acpi_ec_get_real_ecdt(void)
+int __init acpi_ec_ecdt_probe(void)
 {
+        int ret;
         acpi_status status;
         struct acpi_table_ecdt *ecdt_ptr;
 
-        status = acpi_get_table(ACPI_SIG_ECDT, 1,
-                                (struct acpi_table_header **)&ecdt_ptr);
-        if (ACPI_FAILURE(status))
-                return -ENODEV;
-
-        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT"));
-
+        boot_ec = make_acpi_ec();
+        if (!boot_ec)
+                return -ENOMEM;
         /*
-         * Generate a temporary ec context to use until the namespace is scanned
+         * Generate a boot ec context
          */
-        ec_ecdt = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
-        if (!ec_ecdt)
-                return -ENOMEM;
 
-        mutex_init(&ec_ecdt->lock);
-        atomic_set(&ec_ecdt->event_count, 1);
-        if (acpi_ec_mode == EC_INTR) {
-                init_waitqueue_head(&ec_ecdt->wait);
-        }
-        ec_ecdt->command_addr = ecdt_ptr->control.address;
-        ec_ecdt->data_addr = ecdt_ptr->data.address;
-        ec_ecdt->gpe = ecdt_ptr->gpe;
-        /* use the GL just to be safe */
-        ec_ecdt->global_lock = TRUE;
-        ec_ecdt->uid = ecdt_ptr->uid;
-
-        status = acpi_get_handle(NULL, ecdt_ptr->id, &ec_ecdt->handle);
-        if (ACPI_FAILURE(status)) {
+        status = acpi_get_table(ACPI_SIG_ECDT, 1,
+                                (struct acpi_table_header **)&ecdt_ptr);
+        if (ACPI_FAILURE(status))
                 goto error;
-        }
-
-        return 0;
-      error:
-        ACPI_EXCEPTION((AE_INFO, status, "Could not use ECDT"));
-        kfree(ec_ecdt);
-        ec_ecdt = NULL;
 
-        return -ENODEV;
-}
-
-static int __initdata acpi_fake_ecdt_enabled;
-int __init acpi_ec_ecdt_probe(void)
-{
-        acpi_status status;
-        int ret;
+        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT"));
 
-        ret = acpi_ec_get_real_ecdt();
-        /* Try to make a fake ECDT */
-        if (ret && acpi_fake_ecdt_enabled) {
-                ret = acpi_ec_fake_ecdt();
-        }
+        boot_ec->command_addr = ecdt_ptr->control.address;
+        boot_ec->data_addr = ecdt_ptr->data.address;
+        boot_ec->gpe = ecdt_ptr->gpe;
+        boot_ec->handle = ACPI_ROOT_OBJECT;
 
-        if (ret)
+        ret = ec_install_handlers(boot_ec);
+        if (!ret) {
+                first_ec = boot_ec;
                 return 0;
-
-        /*
-         * Install GPE handler
-         */
-        status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe,
-                                          ACPI_GPE_EDGE_TRIGGERED,
-                                          &acpi_ec_gpe_handler, ec_ecdt);
-        if (ACPI_FAILURE(status)) {
-                goto error;
         }
-        acpi_set_gpe_type(NULL, ec_ecdt->gpe, ACPI_GPE_TYPE_RUNTIME);
-        acpi_enable_gpe(NULL, ec_ecdt->gpe, ACPI_NOT_ISR);
-
-        status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT,
-                                                    ACPI_ADR_SPACE_EC,
-                                                    &acpi_ec_space_handler,
-                                                    &acpi_ec_space_setup,
-                                                    ec_ecdt);
-        if (ACPI_FAILURE(status)) {
-                acpi_remove_gpe_handler(NULL, ec_ecdt->gpe,
-                                        &acpi_ec_gpe_handler);
-                goto error;
-        }
-
-        return 0;
-
       error:
-        ACPI_EXCEPTION((AE_INFO, status, "Could not use ECDT"));
-        kfree(ec_ecdt);
-        ec_ecdt = NULL;
+        kfree(boot_ec);
+        boot_ec = NULL;
 
         return -ENODEV;
 }
@@ -1003,13 +873,6 @@ static void __exit acpi_ec_exit(void)
 }
 #endif                          /* 0 */
 
-static int __init acpi_fake_ecdt_setup(char *str)
-{
-        acpi_fake_ecdt_enabled = 1;
-        return 1;
-}
-
-__setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
 static int __init acpi_ec_set_intr_mode(char *str)
 {
         int intr;
@@ -1017,12 +880,8 @@ static int __init acpi_ec_set_intr_mode(char *str)
         if (!get_option(&str, &intr))
                 return 0;
 
-        if (intr) {
-                acpi_ec_mode = EC_INTR;
-        } else {
-                acpi_ec_mode = EC_POLL;
-        }
-        acpi_ec_driver.ops.add = acpi_ec_add;
+        acpi_ec_mode = (intr) ? EC_INTR : EC_POLL;
+
         printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
 
         return 1;
diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c
deleted file mode 100644
index acab4a481897..000000000000
--- a/drivers/acpi/i2c_ec.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * SMBus driver for ACPI Embedded Controller ($Revision: 1.3 $)
- *
- * Copyright (c) 2002, 2005 Ducrot Bruno
- * Copyright (c) 2005 Rich Townsend (tiny hacks & tweaks)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2.
- */
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/acpi.h>
-#include <linux/delay.h>
-
-#include "i2c_ec.h"
-
-#define xudelay(t)      udelay(t)
-#define xmsleep(t)      msleep(t)
-
-#define ACPI_EC_HC_COMPONENT    0x00080000
-#define ACPI_EC_HC_CLASS        "ec_hc_smbus"
-#define ACPI_EC_HC_HID          "ACPI0001"
-#define ACPI_EC_HC_DEVICE_NAME  "EC HC smbus"
-
-#define _COMPONENT              ACPI_EC_HC_COMPONENT
-
-ACPI_MODULE_NAME("i2c_ec");
-
-static int acpi_ec_hc_add(struct acpi_device *device);
-static int acpi_ec_hc_remove(struct acpi_device *device, int type);
-
-static struct acpi_driver acpi_ec_hc_driver = {
-        .name = "i2c_ec",
-        .class = ACPI_EC_HC_CLASS,
-        .ids = ACPI_EC_HC_HID,
-        .ops = {
-                .add = acpi_ec_hc_add,
-                .remove = acpi_ec_hc_remove,
-                },
-};
-
-/* Various bit mask for EC_SC (R) */
-#define OBF             0x01
-#define IBF             0x02
-#define CMD             0x08
-#define BURST           0x10
-#define SCI_EVT         0x20
-#define SMI_EVT         0x40
-
-/* Commands for EC_SC (W) */
-#define RD_EC           0x80
-#define WR_EC           0x81
-#define BE_EC           0x82
-#define BD_EC           0x83
-#define QR_EC           0x84
-
-/*
- * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
- */
-
-#define ACPI_EC_SMB_PRTCL       0x00    /* protocol, PEC */
-#define ACPI_EC_SMB_STS         0x01    /* status */
-#define ACPI_EC_SMB_ADDR        0x02    /* address */
-#define ACPI_EC_SMB_CMD         0x03    /* command */
-#define ACPI_EC_SMB_DATA        0x04    /* 32 data registers */
-#define ACPI_EC_SMB_BCNT        0x24    /* number of data bytes */
-#define ACPI_EC_SMB_ALRM_A      0x25    /* alarm address */
-#define ACPI_EC_SMB_ALRM_D      0x26    /* 2 bytes alarm data */
-
-#define ACPI_EC_SMB_STS_DONE    0x80
-#define ACPI_EC_SMB_STS_ALRM    0x40
-#define ACPI_EC_SMB_STS_RES     0x20
-#define ACPI_EC_SMB_STS_STATUS  0x1f
-
-#define ACPI_EC_SMB_STATUS_OK           0x00
-#define ACPI_EC_SMB_STATUS_FAIL         0x07
-#define ACPI_EC_SMB_STATUS_DNAK         0x10
-#define ACPI_EC_SMB_STATUS_DERR         0x11
-#define ACPI_EC_SMB_STATUS_CMD_DENY     0x12
-#define ACPI_EC_SMB_STATUS_UNKNOWN      0x13
-#define ACPI_EC_SMB_STATUS_ACC_DENY     0x17
-#define ACPI_EC_SMB_STATUS_TIMEOUT      0x18
-#define ACPI_EC_SMB_STATUS_NOTSUP       0x19
-#define ACPI_EC_SMB_STATUS_BUSY         0x1A
-#define ACPI_EC_SMB_STATUS_PEC          0x1F
-
-#define ACPI_EC_SMB_PRTCL_WRITE                 0x00
-#define ACPI_EC_SMB_PRTCL_READ                  0x01
-#define ACPI_EC_SMB_PRTCL_QUICK                 0x02
-#define ACPI_EC_SMB_PRTCL_BYTE                  0x04
-#define ACPI_EC_SMB_PRTCL_BYTE_DATA             0x06
-#define ACPI_EC_SMB_PRTCL_WORD_DATA             0x08
-#define ACPI_EC_SMB_PRTCL_BLOCK_DATA            0x0a
-#define ACPI_EC_SMB_PRTCL_PROC_CALL             0x0c
-#define ACPI_EC_SMB_PRTCL_BLOCK_PROC_CALL       0x0d
-#define ACPI_EC_SMB_PRTCL_I2C_BLOCK_DATA        0x4a
-#define ACPI_EC_SMB_PRTCL_PEC                   0x80
-
-/* Length of pre/post transaction sleep (msec) */
-#define ACPI_EC_SMB_TRANSACTION_SLEEP           1
-#define ACPI_EC_SMB_ACCESS_SLEEP1               1
-#define ACPI_EC_SMB_ACCESS_SLEEP2               10
-
-static int acpi_ec_smb_read(struct acpi_ec_smbus *smbus, u8 address, u8 * data)
-{
-        u8 val;
-        int err;
-
-        err = ec_read(smbus->base + address, &val);
-        if (!err) {
-                *data = val;
-        }
-        xmsleep(ACPI_EC_SMB_TRANSACTION_SLEEP);
-        return (err);
-}
-
-static int acpi_ec_smb_write(struct acpi_ec_smbus *smbus, u8 address, u8 data)
-{
-        int err;
-
-        err = ec_write(smbus->base + address, data);
-        return (err);
-}
-
-static int
-acpi_ec_smb_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
-                   char read_write, u8 command, int size,
-                   union i2c_smbus_data *data)
-{
-        struct acpi_ec_smbus *smbus = adap->algo_data;
-        unsigned char protocol, len = 0, pec, temp[2] = { 0, 0 };
-        int i;
-
-        if (read_write == I2C_SMBUS_READ) {
-                protocol = ACPI_EC_SMB_PRTCL_READ;
-        } else {
-                protocol = ACPI_EC_SMB_PRTCL_WRITE;
-        }
-        pec = (flags & I2C_CLIENT_PEC) ? ACPI_EC_SMB_PRTCL_PEC : 0;
-
-        switch (size) {
-
-        case I2C_SMBUS_QUICK:
-                protocol |= ACPI_EC_SMB_PRTCL_QUICK;
-                read_write = I2C_SMBUS_WRITE;
-                break;
-
-        case I2C_SMBUS_BYTE:
-                if (read_write == I2C_SMBUS_WRITE) {
-                        acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->byte);
-                }
-                protocol |= ACPI_EC_SMB_PRTCL_BYTE;
-                break;
-
-        case I2C_SMBUS_BYTE_DATA:
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
-                if (read_write == I2C_SMBUS_WRITE) {
-                        acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->byte);
-                }
-                protocol |= ACPI_EC_SMB_PRTCL_BYTE_DATA;
-                break;
-
-        case I2C_SMBUS_WORD_DATA:
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
-                if (read_write == I2C_SMBUS_WRITE) {
-                        acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->word);
-                        acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + 1,
-                                          data->word >> 8);
-                }
-                protocol |= ACPI_EC_SMB_PRTCL_WORD_DATA | pec;
-                break;
-
-        case I2C_SMBUS_BLOCK_DATA:
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
-                if (read_write == I2C_SMBUS_WRITE) {
-                        len = min_t(u8, data->block[0], 32);
-                        acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len);
-                        for (i = 0; i < len; i++)
-                                acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i,
-                                                  data->block[i + 1]);
-                }
-                protocol |= ACPI_EC_SMB_PRTCL_BLOCK_DATA | pec;
-                break;
-
-        case I2C_SMBUS_I2C_BLOCK_DATA:
-                len = min_t(u8, data->block[0], 32);
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len);
-                if (read_write == I2C_SMBUS_WRITE) {
-                        for (i = 0; i < len; i++) {
-                                acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i,
-                                                  data->block[i + 1]);
-                        }
-                }
-                protocol |= ACPI_EC_SMB_PRTCL_I2C_BLOCK_DATA;
-                break;
-
-        case I2C_SMBUS_PROC_CALL:
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->word);
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + 1, data->word >> 8);
-                protocol = ACPI_EC_SMB_PRTCL_PROC_CALL | pec;
-                read_write = I2C_SMBUS_READ;
-                break;
-
-        case I2C_SMBUS_BLOCK_PROC_CALL:
-                protocol |= pec;
-                len = min_t(u8, data->block[0], 31);
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
-                acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len);
-                for (i = 0; i < len; i++)
-                        acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i,
-                                          data->block[i + 1]);
-                protocol = ACPI_EC_SMB_PRTCL_BLOCK_PROC_CALL | pec;
-                read_write = I2C_SMBUS_READ;
-                break;
-
-        default:
-                ACPI_DEBUG_PRINT((ACPI_DB_WARN, "EC SMBus adapter: "
-                                  "Unsupported transaction %d\n", size));
-                return (-1);
-        }
-
-        acpi_ec_smb_write(smbus, ACPI_EC_SMB_ADDR, addr << 1);
-        acpi_ec_smb_write(smbus, ACPI_EC_SMB_PRTCL, protocol);
-
-        acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0);
-
-        if (~temp[0] & ACPI_EC_SMB_STS_DONE) {
-                xudelay(500);
-                acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0);
-        }
-        if (~temp[0] & ACPI_EC_SMB_STS_DONE) {
-                xmsleep(ACPI_EC_SMB_ACCESS_SLEEP2);
-                acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0);
-        }
-        if ((~temp[0] & ACPI_EC_SMB_STS_DONE)
-            || (temp[0] & ACPI_EC_SMB_STS_STATUS)) {
-                return (-1);
-        }
-
-        if (read_write == I2C_SMBUS_WRITE) {
-                return (0);
-        }
-
-        switch (size) {
-
-        case I2C_SMBUS_BYTE:
-        case I2C_SMBUS_BYTE_DATA:
-                acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA, &data->byte);
-                break;
-
-        case I2C_SMBUS_WORD_DATA:
-        case I2C_SMBUS_PROC_CALL:
-                acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA, temp + 0);
-                acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA + 1, temp + 1);
-                data->word = (temp[1] << 8) | temp[0];
-                break;
-
-        case I2C_SMBUS_BLOCK_DATA:
-        case I2C_SMBUS_BLOCK_PROC_CALL:
-                len = 0;
-                acpi_ec_smb_read(smbus, ACPI_EC_SMB_BCNT, &len);
-                len = min_t(u8, len, 32);
-        case I2C_SMBUS_I2C_BLOCK_DATA:
-                for (i = 0; i < len; i++)
-                        acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA + i,
-                                         data->block + i + 1);
-                data->block[0] = len;
-                break;
-        }
-
-        return (0);
-}
-
-static u32 acpi_ec_smb_func(struct i2c_adapter *adapter)
-{
-
-        return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-                I2C_FUNC_SMBUS_BLOCK_DATA |
-                I2C_FUNC_SMBUS_PROC_CALL |
-                I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
-                I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC);
-}
-
-static const struct i2c_algorithm acpi_ec_smbus_algorithm = {
-        .smbus_xfer = acpi_ec_smb_access,
-        .functionality = acpi_ec_smb_func,
-};
-
-static int acpi_ec_hc_add(struct acpi_device *device)
-{
-        int status;
-        unsigned long val;
-        struct acpi_ec_hc *ec_hc;
-        struct acpi_ec_smbus *smbus;
-
-        if (!device) {
-                return -EINVAL;
-        }
-
-        ec_hc = kzalloc(sizeof(struct acpi_ec_hc), GFP_KERNEL);
-        if (!ec_hc) {
-                return -ENOMEM;
-        }
-
-        smbus = kzalloc(sizeof(struct acpi_ec_smbus), GFP_KERNEL);
-        if (!smbus) {
-                kfree(ec_hc);
-                return -ENOMEM;
-        }
-
-        ec_hc->handle = device->handle;
-        strcpy(acpi_device_name(device), ACPI_EC_HC_DEVICE_NAME);
-        strcpy(acpi_device_class(device), ACPI_EC_HC_CLASS);
-        acpi_driver_data(device) = ec_hc;
-
-        status = acpi_evaluate_integer(ec_hc->handle, "_EC", NULL, &val);
-        if (ACPI_FAILURE(status)) {
-                ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error obtaining _EC\n"));
-                kfree(ec_hc);
-                kfree(smbus);
-                return -EIO;
-        }
-
-        smbus->ec = acpi_driver_data(device->parent);
-        smbus->base = (val & 0xff00ull) >> 8;
-        smbus->alert = val & 0xffull;
-
-        smbus->adapter.owner = THIS_MODULE;
-        smbus->adapter.algo = &acpi_ec_smbus_algorithm;
-        smbus->adapter.algo_data = smbus;
-        smbus->adapter.dev.parent = &device->dev;
-
-        if (i2c_add_adapter(&smbus->adapter)) {
-                ACPI_DEBUG_PRINT((ACPI_DB_WARN,
-                                  "EC SMBus adapter: Failed to register adapter\n"));
-                kfree(smbus);
-                kfree(ec_hc);
-                return -EIO;
-        }
-
-        ec_hc->smbus = smbus;
-
-        printk(KERN_INFO PREFIX "%s [%s]\n",
-               acpi_device_name(device), acpi_device_bid(device));
-
-        return AE_OK;
-}
-
-static int acpi_ec_hc_remove(struct acpi_device *device, int type)
-{
-        struct acpi_ec_hc *ec_hc;
-
-        if (!device) {
-                return -EINVAL;
-        }
-        ec_hc = acpi_driver_data(device);
-
-        i2c_del_adapter(&ec_hc->smbus->adapter);
-        kfree(ec_hc->smbus);
-        kfree(ec_hc);
-
-        return AE_OK;
-}
-
-static int __init acpi_ec_hc_init(void)
-{
-        int result;
-
-        result = acpi_bus_register_driver(&acpi_ec_hc_driver);
-        if (result < 0) {
-                return -ENODEV;
-        }
-        return 0;
-}
-
-static void __exit acpi_ec_hc_exit(void)
-{
-        acpi_bus_unregister_driver(&acpi_ec_hc_driver);
-}
-
-struct acpi_ec_hc *acpi_get_ec_hc(struct acpi_device *device)
-{
-        return acpi_driver_data(device->parent);
-}
-
-EXPORT_SYMBOL(acpi_get_ec_hc);
-
-module_init(acpi_ec_hc_init);
-module_exit(acpi_ec_hc_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ducrot Bruno");
-MODULE_DESCRIPTION("ACPI EC SMBus driver");
diff --git a/drivers/acpi/i2c_ec.h b/drivers/acpi/i2c_ec.h
deleted file mode 100644
index 7c53fb732d61..000000000000
--- a/drivers/acpi/i2c_ec.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * SMBus driver for ACPI Embedded Controller ($Revision: 1.2 $)
- *
- * Copyright (c) 2002, 2005 Ducrot Bruno
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2.
- */
-
-struct acpi_ec_smbus {
-        struct i2c_adapter adapter;
-        union acpi_ec *ec;
-        int base;
-        int alert;
-};
-
-struct acpi_ec_hc {
-        acpi_handle handle;
-        struct acpi_ec_smbus *smbus;
-};
-
-struct acpi_ec_hc *acpi_get_ec_hc(struct acpi_device *device);
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
deleted file mode 100644
index dc1096608f43..000000000000
--- a/drivers/acpi/ibm_acpi.c
+++ /dev/null
@@ -1,2798 +0,0 @@
-/*
- *  ibm_acpi.c - IBM ThinkPad ACPI Extras
- *
- *
- *  Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
- *  Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define IBM_VERSION "0.13"
-
-/*
- *  Changelog:
- *
- *  2006-11-22  0.13    new maintainer
- *                      changelog now lives in git commit history, and will
- *                      not be updated further in-file.
- *  
- *  2005-08-17  0.12    fix compilation on 2.6.13-rc kernels
- *  2005-03-17  0.11    support for 600e, 770x
- *                          thanks to Jamie Lentin <lentinj@dial.pipex.com>
- *                      support for 770e, G41
- *                      G40 and G41 don't have a thinklight
- *                      temperatures no longer experimental
- *                      experimental brightness control
- *                      experimental volume control
- *                      experimental fan enable/disable
- *  2005-01-16  0.10    fix module loading on R30, R31 
- *  2005-01-16  0.9     support for 570, R30, R31
- *                      ultrabay support on A22p, A3x
- *                      limit arg for cmos, led, beep, drop experimental status
- *                      more capable led control on A21e, A22p, T20-22, X20
- *                      experimental temperatures and fan speed
- *                      experimental embedded controller register dump
- *                      mark more functions as __init, drop incorrect __exit
- *                      use MODULE_VERSION
- *                          thanks to Henrik Brix Andersen <brix@gentoo.org>
- *                      fix parameter passing on module loading
- *                          thanks to Rusty Russell <rusty@rustcorp.com.au>
- *                          thanks to Jim Radford <radford@blackbean.org>
- *  2004-11-08  0.8     fix init error case, don't return from a macro
- *                          thanks to Chris Wright <chrisw@osdl.org>
- *  2004-10-23  0.7     fix module loading on A21e, A22p, T20, T21, X20
- *                      fix led control on A21e
- *  2004-10-19  0.6     use acpi_bus_register_driver() to claim HKEY device
- *  2004-10-18  0.5     thinklight support on A21e, G40, R32, T20, T21, X20
- *                      proc file format changed
- *                      video_switch command
- *                      experimental cmos control
- *                      experimental led control
- *                      experimental acpi sounds
- *  2004-09-16  0.4     support for module parameters
- *                      hotkey mask can be prefixed by 0x
- *                      video output switching
- *                      video expansion control
- *                      ultrabay eject support
- *                      removed lcd brightness/on/off control, didn't work
- *  2004-08-17  0.3     support for R40
- *                      lcd off, brightness control
- *                      thinklight on/off
- *  2004-08-14  0.2     support for T series, X20
- *                      bluetooth enable/disable
- *                      hotkey events disabled by default
- *                      removed fan control, currently useless
- *  2004-08-09  0.1     initial release, support for X series
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <linux/proc_fs.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <asm/uaccess.h>
-
-#include <linux/dmi.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/acnamesp.h>
-
-#define IBM_NAME "ibm"
-#define IBM_DESC "IBM ThinkPad ACPI Extras"
-#define IBM_FILE "ibm_acpi"
-#define IBM_URL "http://ibm-acpi.sf.net/"
-
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
-MODULE_DESCRIPTION(IBM_DESC);
-MODULE_VERSION(IBM_VERSION);
-MODULE_LICENSE("GPL");
-
-#define IBM_DIR IBM_NAME
-
-#define IBM_LOG IBM_FILE ": "
-#define IBM_ERR    KERN_ERR    IBM_LOG
-#define IBM_NOTICE KERN_NOTICE IBM_LOG
-#define IBM_INFO   KERN_INFO   IBM_LOG
-#define IBM_DEBUG  KERN_DEBUG  IBM_LOG
-
-#define IBM_MAX_ACPI_ARGS 3
-
-#define __unused __attribute__ ((unused))
-
-static int experimental;
-module_param(experimental, int, 0);
-
-static acpi_handle root_handle = NULL;
-
-#define IBM_HANDLE(object, parent, paths...)                    \
-        static acpi_handle  object##_handle;                    \
-        static acpi_handle *object##_parent = &parent##_handle; \
-        static char        *object##_path;                      \
-        static char        *object##_paths[] = { paths }
-
-IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0",      /* 240, 240x */
-           "\\_SB.PCI.ISA.EC",  /* 570 */
-           "\\_SB.PCI0.ISA0.EC0",       /* 600e/x, 770e, 770x */
-           "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */
-           "\\_SB.PCI0.AD4S.EC0",       /* i1400, R30 */
-           "\\_SB.PCI0.ICH3.EC0",       /* R31 */
-           "\\_SB.PCI0.LPC.EC", /* all others */
-    );
-
-IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA",      /* 570 */
-           "\\_SB.PCI0.AGP0.VID0",      /* 600e/x, 770x */
-           "\\_SB.PCI0.VID0",   /* 770e */
-           "\\_SB.PCI0.VID",    /* A21e, G4x, R50e, X30, X40 */
-           "\\_SB.PCI0.AGP.VID",        /* all others */
-    );                          /* R30, R31 */
-
-IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID");  /* G41 */
-
-IBM_HANDLE(cmos, root, "\\UCMS",        /* R50, R50e, R50p, R51, T4x, X31, X40 */
-           "\\CMOS",            /* A3x, G4x, R32, T23, T30, X22-24, X30 */
-           "\\CMS",             /* R40, R40e */
-    );                          /* all others */
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_HANDLE(dock, root, "\\_SB.GDCK",    /* X30, X31, X40 */
-           "\\_SB.PCI0.DOCK",   /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
-           "\\_SB.PCI0.PCI1.DOCK",      /* all others */
-           "\\_SB.PCI.ISA.SLCE",        /* 570 */
-    );                          /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST",        /* 570 */
-           "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
-           "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ 
-           "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
-    );                          /* A21e, R30, R31 */
-
-IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
-           "_EJ0",              /* all others */
-    );                          /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-
-IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV",     /* A3x, R32 */
-           "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
-    );                          /* all others */
-
-IBM_HANDLE(bay2_ej, bay2, "_EJ3",       /* 600e/x, 770e, A3x */
-           "_EJ0",              /* 770x */
-    );                          /* all others */
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-IBM_HANDLE(pci, root, "\\_SB.PCI");     /* 570 */
-
-IBM_HANDLE(hkey, ec, "\\_SB.HKEY",      /* 600e/x, 770e, 770x */
-           "^HKEY",             /* R30, R31 */
-           "HKEY",              /* all others */
-    );                          /* 570 */
-
-IBM_HANDLE(lght, root, "\\LGHT");       /* A21e, A2xm/p, T20-22, X20-21 */
-IBM_HANDLE(ledb, ec, "LEDB");   /* G4x */
-
-IBM_HANDLE(led, ec, "SLED",     /* 570 */
-           "SYSL",              /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-           "LED",               /* all others */
-    );                          /* R30, R31 */
-
-IBM_HANDLE(beep, ec, "BEEP");   /* all except R30, R31 */
-IBM_HANDLE(ecrd, ec, "ECRD");   /* 570 */
-IBM_HANDLE(ecwr, ec, "ECWR");   /* 570 */
-IBM_HANDLE(fans, ec, "FANS");   /* X31, X40, X41 */
-
-IBM_HANDLE(gfan, ec, "GFAN",    /* 570 */
-           "\\FSPD",            /* 600e/x, 770e, 770x */
-    );                          /* all others */
-
-IBM_HANDLE(sfan, ec, "SFAN",    /* 570 */
-           "JFNS",              /* 770x-JL */
-    );                          /* all others */
-
-#define IBM_HKEY_HID    "IBM0068"
-#define IBM_PCI_HID     "PNP0A03"
-
-enum thermal_access_mode {
-        IBMACPI_THERMAL_NONE = 0,       /* No thermal support */
-        IBMACPI_THERMAL_ACPI_TMP07,     /* Use ACPI TMP0-7 */
-        IBMACPI_THERMAL_ACPI_UPDT,      /* Use ACPI TMP0-7 with UPDT */
-        IBMACPI_THERMAL_TPEC_8,         /* Use ACPI EC regs, 8 sensors */
-        IBMACPI_THERMAL_TPEC_16,        /* Use ACPI EC regs, 16 sensors */
-};
-
-#define IBMACPI_MAX_THERMAL_SENSORS 16  /* Max thermal sensors supported */
-struct ibm_thermal_sensors_struct {
-        s32 temp[IBMACPI_MAX_THERMAL_SENSORS];
-};
-
-/*
- * FAN ACCESS MODES
- *
- * IBMACPI_FAN_RD_ACPI_GFAN:
- *      ACPI GFAN method: returns fan level
- *
- *      see IBMACPI_FAN_WR_ACPI_SFAN
- *      EC 0x2f not available if GFAN exists
- *
- * IBMACPI_FAN_WR_ACPI_SFAN:
- *      ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
- *
- *      EC 0x2f might be available *for reading*, but never for writing.
- *
- * IBMACPI_FAN_WR_TPEC:
- *      ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported
- *      on almost all ThinkPads
- *
- *      Fan speed changes of any sort (including those caused by the
- *      disengaged mode) are usually done slowly by the firmware as the
- *      maximum ammount of fan duty cycle change per second seems to be
- *      limited.
- *
- *      Reading is not available if GFAN exists.
- *      Writing is not available if SFAN exists.
- *
- *      Bits
- *       7      automatic mode engaged;
- *              (default operation mode of the ThinkPad)
- *              fan level is ignored in this mode.
- *       6      disengage mode (takes precedence over bit 7);
- *              not available on all thinkpads.  May disable
- *              the tachometer, and speeds up fan to 100% duty-cycle,
- *              which speeds it up far above the standard RPM
- *              levels.  It is not impossible that it could cause
- *              hardware damage.
- *      5-3     unused in some models.  Extra bits for fan level
- *              in others, but still useless as all values above
- *              7 map to the same speed as level 7 in these models.
- *      2-0     fan level (0..7 usually)
- *                      0x00 = stop
- *                      0x07 = max (set when temperatures critical)
- *              Some ThinkPads may have other levels, see
- *              IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
- *
- *      FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
- *      boot. Apparently the EC does not intialize it, so unless ACPI DSDT
- *      does so, its initial value is meaningless (0x07).
- *
- *      For firmware bugs, refer to:
- *      http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- *      ----
- *
- *      ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
- *      Main fan tachometer reading (in RPM)
- *
- *      This register is present on all ThinkPads with a new-style EC, and
- *      it is known not to be present on the A21m/e, and T22, as there is
- *      something else in offset 0x84 according to the ACPI DSDT.  Other
- *      ThinkPads from this same time period (and earlier) probably lack the
- *      tachometer as well.
- *
- *      Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
- *      was never fixed by IBM to report the EC firmware version string
- *      probably support the tachometer (like the early X models), so
- *      detecting it is quite hard.  We need more data to know for sure.
- *
- *      FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
- *      might result.
- *
- *      FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this
- *      register is not invalidated in ThinkPads that disable tachometer
- *      readings.  Thus, the tachometer readings go stale.
- *
- *      For firmware bugs, refer to:
- *      http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * IBMACPI_FAN_WR_ACPI_FANS:
- *      ThinkPad X31, X40, X41.  Not available in the X60.
- *
- *      FANS ACPI handle: takes three arguments: low speed, medium speed,
- *      high speed.  ACPI DSDT seems to map these three speeds to levels
- *      as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
- *      (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
- *
- *      The speeds are stored on handles
- *      (FANA:FAN9), (FANC:FANB), (FANE:FAND).
- *
- *      There are three default speed sets, acessible as handles:
- *      FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
- *
- *      ACPI DSDT switches which set is in use depending on various
- *      factors.
- *
- *      IBMACPI_FAN_WR_TPEC is also available and should be used to
- *      command the fan.  The X31/X40/X41 seems to have 8 fan levels,
- *      but the ACPI tables just mention level 7.
- */
-
-enum fan_status_access_mode {
-        IBMACPI_FAN_NONE = 0,           /* No fan status or control */
-        IBMACPI_FAN_RD_ACPI_GFAN,       /* Use ACPI GFAN */
-        IBMACPI_FAN_RD_TPEC,            /* Use ACPI EC regs 0x2f, 0x84-0x85 */
-};
-
-enum fan_control_access_mode {
-        IBMACPI_FAN_WR_NONE = 0,        /* No fan control */
-        IBMACPI_FAN_WR_ACPI_SFAN,       /* Use ACPI SFAN */
-        IBMACPI_FAN_WR_TPEC,            /* Use ACPI EC reg 0x2f */
-        IBMACPI_FAN_WR_ACPI_FANS,       /* Use ACPI FANS and EC reg 0x2f */
-};
-
-enum fan_control_commands {
-        IBMACPI_FAN_CMD_SPEED   = 0x0001,       /* speed command */
-        IBMACPI_FAN_CMD_LEVEL   = 0x0002,       /* level command  */
-        IBMACPI_FAN_CMD_ENABLE  = 0x0004,       /* enable/disable cmd,
-                                                 * and also watchdog cmd */
-};
-
-enum {                                  /* Fan control constants */
-        fan_status_offset = 0x2f,       /* EC register 0x2f */
-        fan_rpm_offset = 0x84,          /* EC register 0x84: LSB, 0x85 MSB (RPM)
-                                         * 0x84 must be read before 0x85 */
-
-        IBMACPI_FAN_EC_DISENGAGED       = 0x40, /* EC mode: tachometer
-                                                 * disengaged */
-        IBMACPI_FAN_EC_AUTO             = 0x80, /* EC mode: auto fan
-                                                 * control */
-};
-
-static char *ibm_thinkpad_ec_found = NULL;
-
-struct ibm_struct {
-        char *name;
-        char param[32];
-
-        char *hid;
-        struct acpi_driver *driver;
-
-        int (*init) (void);
-        int (*read) (char *);
-        int (*write) (char *);
-        void (*exit) (void);
-
-        void (*notify) (struct ibm_struct *, u32);
-        acpi_handle *handle;
-        int type;
-        struct acpi_device *device;
-
-        int driver_registered;
-        int proc_created;
-        int init_called;
-        int notify_installed;
-
-        int experimental;
-};
-
-static struct proc_dir_entry *proc_dir = NULL;
-
-static struct backlight_device *ibm_backlight_device = NULL;
-
-#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
-#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
-#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
-
-static int acpi_evalf(acpi_handle handle,
-                      void *res, char *method, char *fmt, ...)
-{
-        char *fmt0 = fmt;
-        struct acpi_object_list params;
-        union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
-        struct acpi_buffer result, *resultp;
-        union acpi_object out_obj;
-        acpi_status status;
-        va_list ap;
-        char res_type;
-        int success;
-        int quiet;
-
-        if (!*fmt) {
-                printk(IBM_ERR "acpi_evalf() called with empty format\n");
-                return 0;
-        }
-
-        if (*fmt == 'q') {
-                quiet = 1;
-                fmt++;
-        } else
-                quiet = 0;
-
-        res_type = *(fmt++);
-
-        params.count = 0;
-        params.pointer = &in_objs[0];
-
-        va_start(ap, fmt);
-        while (*fmt) {
-                char c = *(fmt++);
-                switch (c) {
-                case 'd':       /* int */
-                        in_objs[params.count].integer.value = va_arg(ap, int);
-                        in_objs[params.count++].type = ACPI_TYPE_INTEGER;
-                        break;
-                        /* add more types as needed */
-                default:
-                        printk(IBM_ERR "acpi_evalf() called "
-                               "with invalid format character '%c'\n", c);
-                        return 0;
-                }
-        }
-        va_end(ap);
-
-        if (res_type != 'v') {
-                result.length = sizeof(out_obj);
-                result.pointer = &out_obj;
-                resultp = &result;
-        } else
-                resultp = NULL;
-
-        status = acpi_evaluate_object(handle, method, &params, resultp);
-
-        switch (res_type) {
-        case 'd':               /* int */
-                if (res)
-                        *(int *)res = out_obj.integer.value;
-                success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
-                break;
-        case 'v':               /* void */
-                success = status == AE_OK;
-                break;
-                /* add more types as needed */
-        default:
-                printk(IBM_ERR "acpi_evalf() called "
-                       "with invalid format character '%c'\n", res_type);
-                return 0;
-        }
-
-        if (!success && !quiet)
-                printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
-                       method, fmt0, status);
-
-        return success;
-}
-
-static void __unused acpi_print_int(acpi_handle handle, char *method)
-{
-        int i;
-
-        if (acpi_evalf(handle, &i, method, "d"))
-                printk(IBM_INFO "%s = 0x%x\n", method, i);
-        else
-                printk(IBM_ERR "error calling %s\n", method);
-}
-
-static char *next_cmd(char **cmds)
-{
-        char *start = *cmds;
-        char *end;
-
-        while ((end = strchr(start, ',')) && end == start)
-                start = end + 1;
-
-        if (!end)
-                return NULL;
-
-        *end = 0;
-        *cmds = end + 1;
-        return start;
-}
-
-static int ibm_acpi_driver_init(void)
-{
-        printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
-        printk(IBM_INFO "%s\n", IBM_URL);
-
-        if (ibm_thinkpad_ec_found)
-                printk(IBM_INFO "ThinkPad EC firmware %s\n",
-                       ibm_thinkpad_ec_found);
-
-        return 0;
-}
-
-static int driver_read(char *p)
-{
-        int len = 0;
-
-        len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
-        len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
-
-        return len;
-}
-
-static int hotkey_supported;
-static int hotkey_mask_supported;
-static int hotkey_orig_status;
-static int hotkey_orig_mask;
-
-static int hotkey_get(int *status, int *mask)
-{
-        if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
-                return 0;
-
-        if (hotkey_mask_supported)
-                if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
-                        return 0;
-
-        return 1;
-}
-
-static int hotkey_set(int status, int mask)
-{
-        int i;
-
-        if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
-                return 0;
-
-        if (hotkey_mask_supported)
-                for (i = 0; i < 32; i++) {
-                        int bit = ((1 << i) & mask) != 0;
-                        if (!acpi_evalf(hkey_handle,
-                                        NULL, "MHKM", "vdd", i + 1, bit))
-                                return 0;
-                }
-
-        return 1;
-}
-
-static int hotkey_init(void)
-{
-        /* hotkey not supported on 570 */
-        hotkey_supported = hkey_handle != NULL;
-
-        if (hotkey_supported) {
-                /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-                   A30, R30, R31, T20-22, X20-21, X22-24 */
-                hotkey_mask_supported =
-                    acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
-
-                if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask))
-                        return -ENODEV;
-        }
-
-        return 0;
-}
-
-static int hotkey_read(char *p)
-{
-        int status, mask;
-        int len = 0;
-
-        if (!hotkey_supported) {
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-                return len;
-        }
-
-        if (!hotkey_get(&status, &mask))
-                return -EIO;
-
-        len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
-        if (hotkey_mask_supported) {
-                len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
-                len += sprintf(p + len,
-                               "commands:\tenable, disable, reset, <mask>\n");
-        } else {
-                len += sprintf(p + len, "mask:\t\tnot supported\n");
-                len += sprintf(p + len, "commands:\tenable, disable, reset\n");
-        }
-
-        return len;
-}
-
-static int hotkey_write(char *buf)
-{
-        int status, mask;
-        char *cmd;
-        int do_cmd = 0;
-
-        if (!hotkey_supported)
-                return -ENODEV;
-
-        if (!hotkey_get(&status, &mask))
-                return -EIO;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (strlencmp(cmd, "enable") == 0) {
-                        status = 1;
-                } else if (strlencmp(cmd, "disable") == 0) {
-                        status = 0;
-                } else if (strlencmp(cmd, "reset") == 0) {
-                        status = hotkey_orig_status;
-                        mask = hotkey_orig_mask;
-                } else if (sscanf(cmd, "0x%x", &mask) == 1) {
-                        /* mask set */
-                } else if (sscanf(cmd, "%x", &mask) == 1) {
-                        /* mask set */
-                } else
-                        return -EINVAL;
-                do_cmd = 1;
-        }
-
-        if (do_cmd && !hotkey_set(status, mask))
-                return -EIO;
-
-        return 0;
-}
-
-static void hotkey_exit(void)
-{
-        if (hotkey_supported)
-                hotkey_set(hotkey_orig_status, hotkey_orig_mask);
-}
-
-static void hotkey_notify(struct ibm_struct *ibm, u32 event)
-{
-        int hkey;
-
-        if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
-                acpi_bus_generate_event(ibm->device, event, hkey);
-        else {
-                printk(IBM_ERR "unknown hotkey event %d\n", event);
-                acpi_bus_generate_event(ibm->device, event, 0);
-        }
-}
-
-static int bluetooth_supported;
-
-static int bluetooth_init(void)
-{
-        /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-           G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
-        bluetooth_supported = hkey_handle &&
-            acpi_evalf(hkey_handle, NULL, "GBDC", "qv");
-
-        return 0;
-}
-
-static int bluetooth_status(void)
-{
-        int status;
-
-        if (!bluetooth_supported ||
-            !acpi_evalf(hkey_handle, &status, "GBDC", "d"))
-                status = 0;
-
-        return status;
-}
-
-static int bluetooth_read(char *p)
-{
-        int len = 0;
-        int status = bluetooth_status();
-
-        if (!bluetooth_supported)
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        else if (!(status & 1))
-                len += sprintf(p + len, "status:\t\tnot installed\n");
-        else {
-                len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
-                len += sprintf(p + len, "commands:\tenable, disable\n");
-        }
-
-        return len;
-}
-
-static int bluetooth_write(char *buf)
-{
-        int status = bluetooth_status();
-        char *cmd;
-        int do_cmd = 0;
-
-        if (!bluetooth_supported)
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (strlencmp(cmd, "enable") == 0) {
-                        status |= 2;
-                } else if (strlencmp(cmd, "disable") == 0) {
-                        status &= ~2;
-                } else
-                        return -EINVAL;
-                do_cmd = 1;
-        }
-
-        if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
-                return -EIO;
-
-        return 0;
-}
-
-static int wan_supported;
-
-static int wan_init(void)
-{
-        wan_supported = hkey_handle &&
-            acpi_evalf(hkey_handle, NULL, "GWAN", "qv");
-
-        return 0;
-}
-
-static int wan_status(void)
-{
-        int status;
-
-        if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
-                status = 0;
-
-        return status;
-}
-
-static int wan_read(char *p)
-{
-        int len = 0;
-        int status = wan_status();
-
-        if (!wan_supported)
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        else if (!(status & 1))
-                len += sprintf(p + len, "status:\t\tnot installed\n");
-        else {
-                len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
-                len += sprintf(p + len, "commands:\tenable, disable\n");
-        }
-
-        return len;
-}
-
-static int wan_write(char *buf)
-{
-        int status = wan_status();
-        char *cmd;
-        int do_cmd = 0;
-
-        if (!wan_supported)
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (strlencmp(cmd, "enable") == 0) {
-                        status |= 2;
-                } else if (strlencmp(cmd, "disable") == 0) {
-                        status &= ~2;
-                } else
-                        return -EINVAL;
-                do_cmd = 1;
-        }
-
-        if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
-                return -EIO;
-
-        return 0;
-}
-
-enum video_access_mode {
-        IBMACPI_VIDEO_NONE = 0,
-        IBMACPI_VIDEO_570,      /* 570 */
-        IBMACPI_VIDEO_770,      /* 600e/x, 770e, 770x */
-        IBMACPI_VIDEO_NEW,      /* all others */
-};
-
-static enum video_access_mode video_supported;
-static int video_orig_autosw;
-
-static int video_init(void)
-{
-        int ivga;
-
-        if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
-                /* G41, assume IVGA doesn't change */
-                vid_handle = vid2_handle;
-
-        if (!vid_handle)
-                /* video switching not supported on R30, R31 */
-                video_supported = IBMACPI_VIDEO_NONE;
-        else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
-                /* 570 */
-                video_supported = IBMACPI_VIDEO_570;
-        else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
-                /* 600e/x, 770e, 770x */
-                video_supported = IBMACPI_VIDEO_770;
-        else
-                /* all others */
-                video_supported = IBMACPI_VIDEO_NEW;
-
-        return 0;
-}
-
-static int video_status(void)
-{
-        int status = 0;
-        int i;
-
-        if (video_supported == IBMACPI_VIDEO_570) {
-                if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
-                        status = i & 3;
-        } else if (video_supported == IBMACPI_VIDEO_770) {
-                if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
-                        status |= 0x01 * i;
-                if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
-                        status |= 0x02 * i;
-        } else if (video_supported == IBMACPI_VIDEO_NEW) {
-                acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
-                if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
-                        status |= 0x02 * i;
-
-                acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0);
-                if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
-                        status |= 0x01 * i;
-                if (acpi_evalf(NULL, &i, "\\VCDD", "d"))
-                        status |= 0x08 * i;
-        }
-
-        return status;
-}
-
-static int video_autosw(void)
-{
-        int autosw = 0;
-
-        if (video_supported == IBMACPI_VIDEO_570)
-                acpi_evalf(vid_handle, &autosw, "SWIT", "d");
-        else if (video_supported == IBMACPI_VIDEO_770 ||
-                 video_supported == IBMACPI_VIDEO_NEW)
-                acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
-
-        return autosw & 1;
-}
-
-static int video_read(char *p)
-{
-        int status = video_status();
-        int autosw = video_autosw();
-        int len = 0;
-
-        if (!video_supported) {
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-                return len;
-        }
-
-        len += sprintf(p + len, "status:\t\tsupported\n");
-        len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
-        len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
-        if (video_supported == IBMACPI_VIDEO_NEW)
-                len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
-        len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
-        len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
-        len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
-        if (video_supported == IBMACPI_VIDEO_NEW)
-                len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
-        len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
-        len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
-
-        return len;
-}
-
-static int video_switch(void)
-{
-        int autosw = video_autosw();
-        int ret;
-
-        if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-                return -EIO;
-        ret = video_supported == IBMACPI_VIDEO_570 ?
-            acpi_evalf(ec_handle, NULL, "_Q16", "v") :
-            acpi_evalf(vid_handle, NULL, "VSWT", "v");
-        acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-
-        return ret;
-}
-
-static int video_expand(void)
-{
-        if (video_supported == IBMACPI_VIDEO_570)
-                return acpi_evalf(ec_handle, NULL, "_Q17", "v");
-        else if (video_supported == IBMACPI_VIDEO_770)
-                return acpi_evalf(vid_handle, NULL, "VEXP", "v");
-        else
-                return acpi_evalf(NULL, NULL, "\\VEXP", "v");
-}
-
-static int video_switch2(int status)
-{
-        int ret;
-
-        if (video_supported == IBMACPI_VIDEO_570) {
-                ret = acpi_evalf(NULL, NULL,
-                                 "\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
-        } else if (video_supported == IBMACPI_VIDEO_770) {
-                int autosw = video_autosw();
-                if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-                        return -EIO;
-
-                ret = acpi_evalf(vid_handle, NULL,
-                                 "ASWT", "vdd", status * 0x100, 0);
-
-                acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-        } else {
-                ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
-                    acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
-        }
-
-        return ret;
-}
-
-static int video_write(char *buf)
-{
-        char *cmd;
-        int enable, disable, status;
-
-        if (!video_supported)
-                return -ENODEV;
-
-        enable = disable = 0;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (strlencmp(cmd, "lcd_enable") == 0) {
-                        enable |= 0x01;
-                } else if (strlencmp(cmd, "lcd_disable") == 0) {
-                        disable |= 0x01;
-                } else if (strlencmp(cmd, "crt_enable") == 0) {
-                        enable |= 0x02;
-                } else if (strlencmp(cmd, "crt_disable") == 0) {
-                        disable |= 0x02;
-                } else if (video_supported == IBMACPI_VIDEO_NEW &&
-                           strlencmp(cmd, "dvi_enable") == 0) {
-                        enable |= 0x08;
-                } else if (video_supported == IBMACPI_VIDEO_NEW &&
-                           strlencmp(cmd, "dvi_disable") == 0) {
-                        disable |= 0x08;
-                } else if (strlencmp(cmd, "auto_enable") == 0) {
-                        if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-                                return -EIO;
-                } else if (strlencmp(cmd, "auto_disable") == 0) {
-                        if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0))
-                                return -EIO;
-                } else if (strlencmp(cmd, "video_switch") == 0) {
-                        if (!video_switch())
-                                return -EIO;
-                } else if (strlencmp(cmd, "expand_toggle") == 0) {
-                        if (!video_expand())
-                                return -EIO;
-                } else
-                        return -EINVAL;
-        }
-
-        if (enable || disable) {
-                status = (video_status() & 0x0f & ~disable) | enable;
-                if (!video_switch2(status))
-                        return -EIO;
-        }
-
-        return 0;
-}
-
-static void video_exit(void)
-{
-        acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw);
-}
-
-static int light_supported;
-static int light_status_supported;
-
-static int light_init(void)
-{
-        /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
-        light_supported = (cmos_handle || lght_handle) && !ledb_handle;
-
-        if (light_supported)
-                /* light status not supported on
-                   570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
-                light_status_supported = acpi_evalf(ec_handle, NULL,
-                                                    "KBLT", "qv");
-
-        return 0;
-}
-
-static int light_read(char *p)
-{
-        int len = 0;
-        int status = 0;
-
-        if (!light_supported) {
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        } else if (!light_status_supported) {
-                len += sprintf(p + len, "status:\t\tunknown\n");
-                len += sprintf(p + len, "commands:\ton, off\n");
-        } else {
-                if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
-                        return -EIO;
-                len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
-                len += sprintf(p + len, "commands:\ton, off\n");
-        }
-
-        return len;
-}
-
-static int light_write(char *buf)
-{
-        int cmos_cmd, lght_cmd;
-        char *cmd;
-        int success;
-
-        if (!light_supported)
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (strlencmp(cmd, "on") == 0) {
-                        cmos_cmd = 0x0c;
-                        lght_cmd = 1;
-                } else if (strlencmp(cmd, "off") == 0) {
-                        cmos_cmd = 0x0d;
-                        lght_cmd = 0;
-                } else
-                        return -EINVAL;
-
-                success = cmos_handle ?
-                    acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
-                    acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
-                if (!success)
-                        return -EIO;
-        }
-
-        return 0;
-}
-
-#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
-static int _sta(acpi_handle handle)
-{
-        int status;
-
-        if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
-                status = 0;
-
-        return status;
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_DOCK
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int dock_read(char *p)
-{
-        int len = 0;
-        int docked = dock_docked();
-
-        if (!dock_handle)
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        else if (!docked)
-                len += sprintf(p + len, "status:\t\tundocked\n");
-        else {
-                len += sprintf(p + len, "status:\t\tdocked\n");
-                len += sprintf(p + len, "commands:\tdock, undock\n");
-        }
-
-        return len;
-}
-
-static int dock_write(char *buf)
-{
-        char *cmd;
-
-        if (!dock_docked())
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (strlencmp(cmd, "undock") == 0) {
-                        if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
-                            !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
-                                return -EIO;
-                } else if (strlencmp(cmd, "dock") == 0) {
-                        if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
-                                return -EIO;
-                } else
-                        return -EINVAL;
-        }
-
-        return 0;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
-        int docked = dock_docked();
-        int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID);
-
-        if (event == 1 && !pci) /* 570 */
-                acpi_bus_generate_event(ibm->device, event, 1); /* button */
-        else if (event == 1 && pci)     /* 570 */
-                acpi_bus_generate_event(ibm->device, event, 3); /* dock */
-        else if (event == 3 && docked)
-                acpi_bus_generate_event(ibm->device, event, 1); /* button */
-        else if (event == 3 && !docked)
-                acpi_bus_generate_event(ibm->device, event, 2); /* undock */
-        else if (event == 0 && docked)
-                acpi_bus_generate_event(ibm->device, event, 3); /* dock */
-        else {
-                printk(IBM_ERR "unknown dock event %d, status %d\n",
-                       event, _sta(dock_handle));
-                acpi_bus_generate_event(ibm->device, event, 0); /* unknown */
-        }
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_BAY
-static int bay_status_supported;
-static int bay_status2_supported;
-static int bay_eject_supported;
-static int bay_eject2_supported;
-
-static int bay_init(void)
-{
-        bay_status_supported = bay_handle &&
-            acpi_evalf(bay_handle, NULL, "_STA", "qv");
-        bay_status2_supported = bay2_handle &&
-            acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
-        bay_eject_supported = bay_handle && bay_ej_handle &&
-            (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
-        bay_eject2_supported = bay2_handle && bay2_ej_handle &&
-            (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
-        return 0;
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
-        int len = 0;
-        int occupied = bay_occupied(bay);
-        int occupied2 = bay_occupied(bay2);
-        int eject, eject2;
-
-        len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ?
-                       (occupied ? "occupied" : "unoccupied") :
-                       "not supported");
-        if (bay_status2_supported)
-                len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
-                               "occupied" : "unoccupied");
-
-        eject = bay_eject_supported && occupied;
-        eject2 = bay_eject2_supported && occupied2;
-
-        if (eject && eject2)
-                len += sprintf(p + len, "commands:\teject, eject2\n");
-        else if (eject)
-                len += sprintf(p + len, "commands:\teject\n");
-        else if (eject2)
-                len += sprintf(p + len, "commands:\teject2\n");
-
-        return len;
-}
-
-static int bay_write(char *buf)
-{
-        char *cmd;
-
-        if (!bay_eject_supported && !bay_eject2_supported)
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (bay_eject_supported && strlencmp(cmd, "eject") == 0) {
-                        if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
-                                return -EIO;
-                } else if (bay_eject2_supported &&
-                           strlencmp(cmd, "eject2") == 0) {
-                        if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
-                                return -EIO;
-                } else
-                        return -EINVAL;
-        }
-
-        return 0;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
-        acpi_bus_generate_event(ibm->device, event, 0);
-}
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-static int cmos_read(char *p)
-{
-        int len = 0;
-
-        /* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-           R30, R31, T20-22, X20-21 */
-        if (!cmos_handle)
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        else {
-                len += sprintf(p + len, "status:\t\tsupported\n");
-                len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
-        }
-
-        return len;
-}
-
-static int cmos_eval(int cmos_cmd)
-{
-        if (cmos_handle)
-                return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd);
-        else
-                return 1;
-}
-
-static int cmos_write(char *buf)
-{
-        char *cmd;
-        int cmos_cmd;
-
-        if (!cmos_handle)
-                return -EINVAL;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
-                    cmos_cmd >= 0 && cmos_cmd <= 21) {
-                        /* cmos_cmd set */
-                } else
-                        return -EINVAL;
-
-                if (!cmos_eval(cmos_cmd))
-                        return -EIO;
-        }
-
-        return 0;
-}
-
-enum led_access_mode {
-        IBMACPI_LED_NONE = 0,
-        IBMACPI_LED_570,        /* 570 */
-        IBMACPI_LED_OLD,        /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-        IBMACPI_LED_NEW,        /* all others */
-};
-static enum led_access_mode led_supported;
-
-static int led_init(void)
-{
-        if (!led_handle)
-                /* led not supported on R30, R31 */
-                led_supported = IBMACPI_LED_NONE;
-        else if (strlencmp(led_path, "SLED") == 0)
-                /* 570 */
-                led_supported = IBMACPI_LED_570;
-        else if (strlencmp(led_path, "SYSL") == 0)
-                /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-                led_supported = IBMACPI_LED_OLD;
-        else
-                /* all others */
-                led_supported = IBMACPI_LED_NEW;
-
-        return 0;
-}
-
-#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
-
-static int led_read(char *p)
-{
-        int len = 0;
-
-        if (!led_supported) {
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-                return len;
-        }
-        len += sprintf(p + len, "status:\t\tsupported\n");
-
-        if (led_supported == IBMACPI_LED_570) {
-                /* 570 */
-                int i, status;
-                for (i = 0; i < 8; i++) {
-                        if (!acpi_evalf(ec_handle,
-                                        &status, "GLED", "dd", 1 << i))
-                                return -EIO;
-                        len += sprintf(p + len, "%d:\t\t%s\n",
-                                       i, led_status(status));
-                }
-        }
-
-        len += sprintf(p + len, "commands:\t"
-                       "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
-
-        return len;
-}
-
-/* off, on, blink */
-static const int led_sled_arg1[] = { 0, 1, 3 };
-static const int led_exp_hlbl[] = { 0, 0, 1 };  /* led# * */
-static const int led_exp_hlcl[] = { 0, 1, 1 };  /* led# * */
-static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
-
-#define EC_HLCL 0x0c
-#define EC_HLBL 0x0d
-#define EC_HLMS 0x0e
-
-static int led_write(char *buf)
-{
-        char *cmd;
-        int led, ind, ret;
-
-        if (!led_supported)
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
-                        return -EINVAL;
-
-                if (strstr(cmd, "off")) {
-                        ind = 0;
-                } else if (strstr(cmd, "on")) {
-                        ind = 1;
-                } else if (strstr(cmd, "blink")) {
-                        ind = 2;
-                } else
-                        return -EINVAL;
-
-                if (led_supported == IBMACPI_LED_570) {
-                        /* 570 */
-                        led = 1 << led;
-                        if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-                                        led, led_sled_arg1[ind]))
-                                return -EIO;
-                } else if (led_supported == IBMACPI_LED_OLD) {
-                        /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
-                        led = 1 << led;
-                        ret = ec_write(EC_HLMS, led);
-                        if (ret >= 0)
-                                ret =
-                                    ec_write(EC_HLBL, led * led_exp_hlbl[ind]);
-                        if (ret >= 0)
-                                ret =
-                                    ec_write(EC_HLCL, led * led_exp_hlcl[ind]);
-                        if (ret < 0)
-                                return ret;
-                } else {
-                        /* all others */
-                        if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-                                        led, led_led_arg1[ind]))
-                                return -EIO;
-                }
-        }
-
-        return 0;
-}
-
-static int beep_read(char *p)
-{
-        int len = 0;
-
-        if (!beep_handle)
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        else {
-                len += sprintf(p + len, "status:\t\tsupported\n");
-                len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
-        }
-
-        return len;
-}
-
-static int beep_write(char *buf)
-{
-        char *cmd;
-        int beep_cmd;
-
-        if (!beep_handle)
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
-                    beep_cmd >= 0 && beep_cmd <= 17) {
-                        /* beep_cmd set */
-                } else
-                        return -EINVAL;
-                if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
-                        return -EIO;
-        }
-
-        return 0;
-}
-
-static int acpi_ec_read(int i, u8 * p)
-{
-        int v;
-
-        if (ecrd_handle) {
-                if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
-                        return 0;
-                *p = v;
-        } else {
-                if (ec_read(i, p) < 0)
-                        return 0;
-        }
-
-        return 1;
-}
-
-static int acpi_ec_write(int i, u8 v)
-{
-        if (ecwr_handle) {
-                if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
-                        return 0;
-        } else {
-                if (ec_write(i, v) < 0)
-                        return 0;
-        }
-
-        return 1;
-}
-
-static enum thermal_access_mode thermal_read_mode;
-
-static int thermal_init(void)
-{
-        u8 t, ta1, ta2;
-        int i;
-        int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
-
-        if (ibm_thinkpad_ec_found && experimental) {
-                /*
-                 * Direct EC access mode: sensors at registers
-                 * 0x78-0x7F, 0xC0-0xC7.  Registers return 0x00 for
-                 * non-implemented, thermal sensors return 0x80 when
-                 * not available
-                 */
-
-                ta1 = ta2 = 0;
-                for (i = 0; i < 8; i++) {
-                        if (likely(acpi_ec_read(0x78 + i, &t))) {
-                                ta1 |= t;
-                        } else {
-                                ta1 = 0;
-                                break;
-                        }
-                        if (likely(acpi_ec_read(0xC0 + i, &t))) {
-                                ta2 |= t;
-                        } else {
-                                ta1 = 0;
-                                break;
-                        }
-                }
-                if (ta1 == 0) {
-                        /* This is sheer paranoia, but we handle it anyway */
-                        if (acpi_tmp7) {
-                                printk(IBM_ERR
-                                       "ThinkPad ACPI EC access misbehaving, "
-                                       "falling back to ACPI TMPx access mode\n");
-                                thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
-                        } else {
-                                printk(IBM_ERR
-                                       "ThinkPad ACPI EC access misbehaving, "
-                                       "disabling thermal sensors access\n");
-                                thermal_read_mode = IBMACPI_THERMAL_NONE;
-                        }
-                } else {
-                        thermal_read_mode =
-                            (ta2 != 0) ?
-                            IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8;
-                }
-        } else if (acpi_tmp7) {
-                if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
-                        /* 600e/x, 770e, 770x */
-                        thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT;
-                } else {
-                        /* Standard ACPI TMPx access, max 8 sensors */
-                        thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
-                }
-        } else {
-                /* temperatures not supported on 570, G4x, R30, R31, R32 */
-                thermal_read_mode = IBMACPI_THERMAL_NONE;
-        }
-
-        return 0;
-}
-
-static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
-{
-        int i, t;
-        s8 tmp;
-        char tmpi[] = "TMPi";
-
-        if (!s)
-                return -EINVAL;
-
-        switch (thermal_read_mode) {
-#if IBMACPI_MAX_THERMAL_SENSORS >= 16
-        case IBMACPI_THERMAL_TPEC_16:
-                for (i = 0; i < 8; i++) {
-                        if (!acpi_ec_read(0xC0 + i, &tmp))
-                                return -EIO;
-                        s->temp[i + 8] = tmp * 1000;
-                }
-                /* fallthrough */
-#endif
-        case IBMACPI_THERMAL_TPEC_8:
-                for (i = 0; i < 8; i++) {
-                        if (!acpi_ec_read(0x78 + i, &tmp))
-                                return -EIO;
-                        s->temp[i] = tmp * 1000;
-                }
-                return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8;
-
-        case IBMACPI_THERMAL_ACPI_UPDT:
-                if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
-                        return -EIO;
-                for (i = 0; i < 8; i++) {
-                        tmpi[3] = '0' + i;
-                        if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
-                                return -EIO;
-                        s->temp[i] = (t - 2732) * 100;
-                }
-                return 8;
-
-        case IBMACPI_THERMAL_ACPI_TMP07:
-                for (i = 0; i < 8; i++) {
-                        tmpi[3] = '0' + i;
-                        if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
-                                return -EIO;
-                        s->temp[i] = t * 1000;
-                }
-                return 8;
-
-        case IBMACPI_THERMAL_NONE:
-        default:
-                return 0;
-        }
-}
-
-static int thermal_read(char *p)
-{
-        int len = 0;
-        int n, i;
-        struct ibm_thermal_sensors_struct t;
-
-        n = thermal_get_sensors(&t);
-        if (unlikely(n < 0))
-                return n;
-
-        len += sprintf(p + len, "temperatures:\t");
-
-        if (n > 0) {
-                for (i = 0; i < (n - 1); i++)
-                        len += sprintf(p + len, "%d ", t.temp[i] / 1000);
-                len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
-        } else
-                len += sprintf(p + len, "not supported\n");
-
-        return len;
-}
-
-static u8 ecdump_regs[256];
-
-static int ecdump_read(char *p)
-{
-        int len = 0;
-        int i, j;
-        u8 v;
-
-        len += sprintf(p + len, "EC      "
-                       " +00 +01 +02 +03 +04 +05 +06 +07"
-                       " +08 +09 +0a +0b +0c +0d +0e +0f\n");
-        for (i = 0; i < 256; i += 16) {
-                len += sprintf(p + len, "EC 0x%02x:", i);
-                for (j = 0; j < 16; j++) {
-                        if (!acpi_ec_read(i + j, &v))
-                                break;
-                        if (v != ecdump_regs[i + j])
-                                len += sprintf(p + len, " *%02x", v);
-                        else
-                                len += sprintf(p + len, "  %02x", v);
-                        ecdump_regs[i + j] = v;
-                }
-                len += sprintf(p + len, "\n");
-                if (j != 16)
-                        break;
-        }
-
-        /* These are way too dangerous to advertise openly... */
-#if 0
-        len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
-                       " (<offset> is 00-ff, <value> is 00-ff)\n");
-        len += sprintf(p + len, "commands:\t0x<offset> <value>  "
-                       " (<offset> is 00-ff, <value> is 0-255)\n");
-#endif
-        return len;
-}
-
-static int ecdump_write(char *buf)
-{
-        char *cmd;
-        int i, v;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
-                        /* i and v set */
-                } else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
-                        /* i and v set */
-                } else
-                        return -EINVAL;
-                if (i >= 0 && i < 256 && v >= 0 && v < 256) {
-                        if (!acpi_ec_write(i, v))
-                                return -EIO;
-                } else
-                        return -EINVAL;
-        }
-
-        return 0;
-}
-
-static int brightness_offset = 0x31;
-
-static int brightness_get(struct backlight_device *bd)
-{
-        u8 level;
-        if (!acpi_ec_read(brightness_offset, &level))
-                return -EIO;
-
-        level &= 0x7;
-
-        return level;
-}
-
-static int brightness_read(char *p)
-{
-        int len = 0;
-        int level;
-
-        if ((level = brightness_get(NULL)) < 0) {
-                len += sprintf(p + len, "level:\t\tunreadable\n");
-        } else {
-                len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
-                len += sprintf(p + len, "commands:\tup, down\n");
-                len += sprintf(p + len, "commands:\tlevel <level>"
-                               " (<level> is 0-7)\n");
-        }
-
-        return len;
-}
-
-#define BRIGHTNESS_UP   4
-#define BRIGHTNESS_DOWN 5
-
-static int brightness_set(int value)
-{
-        int cmos_cmd, inc, i;
-        int current_value = brightness_get(NULL);
-
-        value &= 7;
-
-        cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
-        inc = value > current_value ? 1 : -1;
-        for (i = current_value; i != value; i += inc) {
-                if (!cmos_eval(cmos_cmd))
-                        return -EIO;
-                if (!acpi_ec_write(brightness_offset, i + inc))
-                        return -EIO;
-        }
-
-        return 0;
-}
-
-static int brightness_write(char *buf)
-{
-        int level;
-        int new_level;
-        char *cmd;
-
-        while ((cmd = next_cmd(&buf))) {
-                if ((level = brightness_get(NULL)) < 0)
-                        return level;
-                level &= 7;
-
-                if (strlencmp(cmd, "up") == 0) {
-                        new_level = level == 7 ? 7 : level + 1;
-                } else if (strlencmp(cmd, "down") == 0) {
-                        new_level = level == 0 ? 0 : level - 1;
-                } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
-                           new_level >= 0 && new_level <= 7) {
-                        /* new_level set */
-                } else
-                        return -EINVAL;
-
-                brightness_set(new_level);
-        }
-
-        return 0;
-}
-
-static int brightness_update_status(struct backlight_device *bd)
-{
-        return brightness_set(
-                (bd->props.fb_blank == FB_BLANK_UNBLANK &&
-                 bd->props.power == FB_BLANK_UNBLANK) ?
-                                bd->props.brightness : 0);
-}
-
-static struct backlight_ops ibm_backlight_data = {
-        .get_brightness = brightness_get,
-        .update_status  = brightness_update_status,
-};
-
-static int brightness_init(void)
-{
-        int b;
-
-        b = brightness_get(NULL);
-        if (b < 0)
-                return b;
-
-        ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
-                                                         &ibm_backlight_data);
-        if (IS_ERR(ibm_backlight_device)) {
-                printk(IBM_ERR "Could not register backlight device\n");
-                return PTR_ERR(ibm_backlight_device);
-        }
-
-        ibm_backlight_device->props.max_brightness = 7;
-        ibm_backlight_device->props.brightness = b;
-        backlight_update_status(ibm_backlight_device);
-
-        return 0;
-}
-
-static void brightness_exit(void)
-{
-        if (ibm_backlight_device) {
-                backlight_device_unregister(ibm_backlight_device);
-                ibm_backlight_device = NULL;
-        }
-}
-
-static int volume_offset = 0x30;
-
-static int volume_read(char *p)
-{
-        int len = 0;
-        u8 level;
-
-        if (!acpi_ec_read(volume_offset, &level)) {
-                len += sprintf(p + len, "level:\t\tunreadable\n");
-        } else {
-                len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
-                len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
-                len += sprintf(p + len, "commands:\tup, down, mute\n");
-                len += sprintf(p + len, "commands:\tlevel <level>"
-                               " (<level> is 0-15)\n");
-        }
-
-        return len;
-}
-
-#define VOLUME_DOWN     0
-#define VOLUME_UP       1
-#define VOLUME_MUTE     2
-
-static int volume_write(char *buf)
-{
-        int cmos_cmd, inc, i;
-        u8 level, mute;
-        int new_level, new_mute;
-        char *cmd;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (!acpi_ec_read(volume_offset, &level))
-                        return -EIO;
-                new_mute = mute = level & 0x40;
-                new_level = level = level & 0xf;
-
-                if (strlencmp(cmd, "up") == 0) {
-                        if (mute)
-                                new_mute = 0;
-                        else
-                                new_level = level == 15 ? 15 : level + 1;
-                } else if (strlencmp(cmd, "down") == 0) {
-                        if (mute)
-                                new_mute = 0;
-                        else
-                                new_level = level == 0 ? 0 : level - 1;
-                } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
-                           new_level >= 0 && new_level <= 15) {
-                        /* new_level set */
-                } else if (strlencmp(cmd, "mute") == 0) {
-                        new_mute = 0x40;
-                } else
-                        return -EINVAL;
-
-                if (new_level != level) {       /* mute doesn't change */
-                        cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN;
-                        inc = new_level > level ? 1 : -1;
-
-                        if (mute && (!cmos_eval(cmos_cmd) ||
-                                     !acpi_ec_write(volume_offset, level)))
-                                return -EIO;
-
-                        for (i = level; i != new_level; i += inc)
-                                if (!cmos_eval(cmos_cmd) ||
-                                    !acpi_ec_write(volume_offset, i + inc))
-                                        return -EIO;
-
-                        if (mute && (!cmos_eval(VOLUME_MUTE) ||
-                                     !acpi_ec_write(volume_offset,
-                                                    new_level + mute)))
-                                return -EIO;
-                }
-
-                if (new_mute != mute) { /* level doesn't change */
-                        cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP;
-
-                        if (!cmos_eval(cmos_cmd) ||
-                            !acpi_ec_write(volume_offset, level + new_mute))
-                                return -EIO;
-                }
-        }
-
-        return 0;
-}
-
-static enum fan_status_access_mode fan_status_access_mode;
-static enum fan_control_access_mode fan_control_access_mode;
-static enum fan_control_commands fan_control_commands;
-
-static int fan_control_status_known;
-static u8 fan_control_initial_status;
-
-static void fan_watchdog_fire(struct work_struct *ignored);
-static int fan_watchdog_maxinterval;
-static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
-
-static int fan_init(void)
-{
-        fan_status_access_mode = IBMACPI_FAN_NONE;
-        fan_control_access_mode = IBMACPI_FAN_WR_NONE;
-        fan_control_commands = 0;
-        fan_control_status_known = 1;
-        fan_watchdog_maxinterval = 0;
-
-        if (gfan_handle) {
-                /* 570, 600e/x, 770e, 770x */
-                fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN;
-        } else {
-                /* all other ThinkPads: note that even old-style
-                 * ThinkPad ECs supports the fan control register */
-                if (likely(acpi_ec_read(fan_status_offset,
-                                        &fan_control_initial_status))) {
-                        fan_status_access_mode = IBMACPI_FAN_RD_TPEC;
-
-                        /* In some ThinkPads, neither the EC nor the ACPI
-                         * DSDT initialize the fan status, and it ends up
-                         * being set to 0x07 when it *could* be either
-                         * 0x07 or 0x80.
-                         *
-                         * Enable for TP-1Y (T43), TP-78 (R51e),
-                         * TP-76 (R52), TP-70 (T43, R52), which are known
-                         * to be buggy. */
-                        if (fan_control_initial_status == 0x07 &&
-                            ibm_thinkpad_ec_found &&
-                            ((ibm_thinkpad_ec_found[0] == '1' &&
-                              ibm_thinkpad_ec_found[1] == 'Y') ||
-                             (ibm_thinkpad_ec_found[0] == '7' &&
-                              (ibm_thinkpad_ec_found[1] == '6' ||
-                               ibm_thinkpad_ec_found[1] == '8' ||
-                               ibm_thinkpad_ec_found[1] == '0'))
-                            )) {
-                                printk(IBM_NOTICE
-                                       "fan_init: initial fan status is "
-                                       "unknown, assuming it is in auto "
-                                       "mode\n");
-                                fan_control_status_known = 0;
-                        }
-                } else {
-                        printk(IBM_ERR
-                               "ThinkPad ACPI EC access misbehaving, "
-                               "fan status and control unavailable\n");
-                        return 0;
-                }
-        }
-
-        if (sfan_handle) {
-                /* 570, 770x-JL */
-                fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN;
-                fan_control_commands |=
-                    IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE;
-        } else {
-                if (!gfan_handle) {
-                        /* gfan without sfan means no fan control */
-                        /* all other models implement TP EC 0x2f control */
-
-                        if (fans_handle) {
-                                /* X31, X40, X41 */
-                                fan_control_access_mode =
-                                    IBMACPI_FAN_WR_ACPI_FANS;
-                                fan_control_commands |=
-                                    IBMACPI_FAN_CMD_SPEED |
-                                    IBMACPI_FAN_CMD_LEVEL |
-                                    IBMACPI_FAN_CMD_ENABLE;
-                        } else {
-                                fan_control_access_mode = IBMACPI_FAN_WR_TPEC;
-                                fan_control_commands |=
-                                    IBMACPI_FAN_CMD_LEVEL |
-                                    IBMACPI_FAN_CMD_ENABLE;
-                        }
-                }
-        }
-
-        return 0;
-}
-
-static int fan_get_status(u8 *status)
-{
-        u8 s;
-
-        /* TODO:
-         * Add IBMACPI_FAN_RD_ACPI_FANS ? */
-
-        switch (fan_status_access_mode) {
-        case IBMACPI_FAN_RD_ACPI_GFAN:
-                /* 570, 600e/x, 770e, 770x */
-
-                if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
-                        return -EIO;
-
-                if (likely(status))
-                        *status = s & 0x07;
-
-                break;
-
-        case IBMACPI_FAN_RD_TPEC:
-                /* all except 570, 600e/x, 770e, 770x */
-                if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
-                        return -EIO;
-
-                if (likely(status))
-                        *status = s;
-
-                break;
-
-        default:
-                return -ENXIO;
-        }
-
-        return 0;
-}
-
-static int fan_get_speed(unsigned int *speed)
-{
-        u8 hi, lo;
-
-        switch (fan_status_access_mode) {
-        case IBMACPI_FAN_RD_TPEC:
-                /* all except 570, 600e/x, 770e, 770x */
-                if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
-                             !acpi_ec_read(fan_rpm_offset + 1, &hi)))
-                        return -EIO;
-
-                if (likely(speed))
-                        *speed = (hi << 8) | lo;
-
-                break;
-
-        default:
-                return -ENXIO;
-        }
-
-        return 0;
-}
-
-static void fan_exit(void)
-{
-        cancel_delayed_work(&fan_watchdog_task);
-        flush_scheduled_work();
-}
-
-static void fan_watchdog_reset(void)
-{
-        static int fan_watchdog_active = 0;
-
-        if (fan_watchdog_active)
-                cancel_delayed_work(&fan_watchdog_task);
-
-        if (fan_watchdog_maxinterval > 0) {
-                fan_watchdog_active = 1;
-                if (!schedule_delayed_work(&fan_watchdog_task,
-                                msecs_to_jiffies(fan_watchdog_maxinterval
-                                                 * 1000))) {
-                        printk(IBM_ERR "failed to schedule the fan watchdog, "
-                               "watchdog will not trigger\n");
-                }
-        } else
-                fan_watchdog_active = 0;
-}
-
-static int fan_read(char *p)
-{
-        int len = 0;
-        int rc;
-        u8 status;
-        unsigned int speed = 0;
-
-        switch (fan_status_access_mode) {
-        case IBMACPI_FAN_RD_ACPI_GFAN:
-                /* 570, 600e/x, 770e, 770x */
-                if ((rc = fan_get_status(&status)) < 0)
-                        return rc;
-
-                len += sprintf(p + len, "status:\t\t%s\n"
-                               "level:\t\t%d\n",
-                               (status != 0) ? "enabled" : "disabled", status);
-                break;
-
-        case IBMACPI_FAN_RD_TPEC:
-                /* all except 570, 600e/x, 770e, 770x */
-                if ((rc = fan_get_status(&status)) < 0)
-                        return rc;
-
-                if (unlikely(!fan_control_status_known)) {
-                        if (status != fan_control_initial_status)
-                                fan_control_status_known = 1;
-                        else
-                                /* Return most likely status. In fact, it
-                                 * might be the only possible status */
-                                status = IBMACPI_FAN_EC_AUTO;
-                }
-
-                len += sprintf(p + len, "status:\t\t%s\n",
-                               (status != 0) ? "enabled" : "disabled");
-
-                /* No ThinkPad boots on disengaged mode, we can safely
-                 * assume the tachometer is online if fan control status
-                 * was unknown */
-                if ((rc = fan_get_speed(&speed)) < 0)
-                        return rc;
-
-                len += sprintf(p + len, "speed:\t\t%d\n", speed);
-
-                if (status & IBMACPI_FAN_EC_DISENGAGED)
-                        /* Disengaged mode takes precedence */
-                        len += sprintf(p + len, "level:\t\tdisengaged\n");
-                else if (status & IBMACPI_FAN_EC_AUTO)
-                        len += sprintf(p + len, "level:\t\tauto\n");
-                else
-                        len += sprintf(p + len, "level:\t\t%d\n", status);
-                break;
-
-        case IBMACPI_FAN_NONE:
-        default:
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        }
-
-        if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) {
-                len += sprintf(p + len, "commands:\tlevel <level>");
-
-                switch (fan_control_access_mode) {
-                case IBMACPI_FAN_WR_ACPI_SFAN:
-                        len += sprintf(p + len, " (<level> is 0-7)\n");
-                        break;
-
-                default:
-                        len += sprintf(p + len, " (<level> is 0-7, "
-                                       "auto, disengaged)\n");
-                        break;
-                }
-        }
-
-        if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE)
-                len += sprintf(p + len, "commands:\tenable, disable\n"
-                               "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
-                               "1-120 (seconds))\n");
-
-        if (fan_control_commands & IBMACPI_FAN_CMD_SPEED)
-                len += sprintf(p + len, "commands:\tspeed <speed>"
-                               " (<speed> is 0-65535)\n");
-
-        return len;
-}
-
-static int fan_set_level(int level)
-{
-        switch (fan_control_access_mode) {
-        case IBMACPI_FAN_WR_ACPI_SFAN:
-                if (level >= 0 && level <= 7) {
-                        if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
-                                return -EIO;
-                } else
-                        return -EINVAL;
-                break;
-
-        case IBMACPI_FAN_WR_ACPI_FANS:
-        case IBMACPI_FAN_WR_TPEC:
-                if ((level != IBMACPI_FAN_EC_AUTO) &&
-                    (level != IBMACPI_FAN_EC_DISENGAGED) &&
-                    ((level < 0) || (level > 7)))
-                        return -EINVAL;
-
-                if (!acpi_ec_write(fan_status_offset, level))
-                        return -EIO;
-                else
-                        fan_control_status_known = 1;
-                break;
-
-        default:
-                return -ENXIO;
-        }
-        return 0;
-}
-
-static int fan_set_enable(void)
-{
-        u8 s;
-        int rc;
-
-        switch (fan_control_access_mode) {
-        case IBMACPI_FAN_WR_ACPI_FANS:
-        case IBMACPI_FAN_WR_TPEC:
-                if ((rc = fan_get_status(&s)) < 0)
-                        return rc;
-
-                /* Don't go out of emergency fan mode */
-                if (s != 7)
-                        s = IBMACPI_FAN_EC_AUTO;
-
-                if (!acpi_ec_write(fan_status_offset, s))
-                        return -EIO;
-                else
-                        fan_control_status_known = 1;
-                break;
-
-        case IBMACPI_FAN_WR_ACPI_SFAN:
-                if ((rc = fan_get_status(&s)) < 0)
-                        return rc;
-
-                s &= 0x07;
-
-                /* Set fan to at least level 4 */
-                if (s < 4)
-                        s = 4;
-
-                if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
-                        return -EIO;
-                break;
-
-        default:
-                return -ENXIO;
-        }
-        return 0;
-}
-
-static int fan_set_disable(void)
-{
-        switch (fan_control_access_mode) {
-        case IBMACPI_FAN_WR_ACPI_FANS:
-        case IBMACPI_FAN_WR_TPEC:
-                if (!acpi_ec_write(fan_status_offset, 0x00))
-                        return -EIO;
-                else
-                        fan_control_status_known = 1;
-                break;
-
-        case IBMACPI_FAN_WR_ACPI_SFAN:
-                if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
-                        return -EIO;
-                break;
-
-        default:
-                return -ENXIO;
-        }
-        return 0;
-}
-
-static int fan_set_speed(int speed)
-{
-        switch (fan_control_access_mode) {
-        case IBMACPI_FAN_WR_ACPI_FANS:
-                if (speed >= 0 && speed <= 65535) {
-                        if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
-                                        speed, speed, speed))
-                                return -EIO;
-                } else
-                        return -EINVAL;
-                break;
-
-        default:
-                return -ENXIO;
-        }
-        return 0;
-}
-
-static int fan_write_cmd_level(const char *cmd, int *rc)
-{
-        int level;
-
-        if (strlencmp(cmd, "level auto") == 0)
-                level = IBMACPI_FAN_EC_AUTO;
-        else if (strlencmp(cmd, "level disengaged") == 0)
-                level = IBMACPI_FAN_EC_DISENGAGED;
-        else if (sscanf(cmd, "level %d", &level) != 1)
-                return 0;
-
-        if ((*rc = fan_set_level(level)) == -ENXIO)
-                printk(IBM_ERR "level command accepted for unsupported "
-                       "access mode %d", fan_control_access_mode);
-
-        return 1;
-}
-
-static int fan_write_cmd_enable(const char *cmd, int *rc)
-{
-        if (strlencmp(cmd, "enable") != 0)
-                return 0;
-
-        if ((*rc = fan_set_enable()) == -ENXIO)
-                printk(IBM_ERR "enable command accepted for unsupported "
-                       "access mode %d", fan_control_access_mode);
-
-        return 1;
-}
-
-static int fan_write_cmd_disable(const char *cmd, int *rc)
-{
-        if (strlencmp(cmd, "disable") != 0)
-                return 0;
-
-        if ((*rc = fan_set_disable()) == -ENXIO)
-                printk(IBM_ERR "disable command accepted for unsupported "
-                       "access mode %d", fan_control_access_mode);
-
-        return 1;
-}
-
-static int fan_write_cmd_speed(const char *cmd, int *rc)
-{
-        int speed;
-
-        /* TODO:
-         * Support speed <low> <medium> <high> ? */
-
-        if (sscanf(cmd, "speed %d", &speed) != 1)
-                return 0;
-
-        if ((*rc = fan_set_speed(speed)) == -ENXIO)
-                printk(IBM_ERR "speed command accepted for unsupported "
-                       "access mode %d", fan_control_access_mode);
-
-        return 1;
-}
-
-static int fan_write_cmd_watchdog(const char *cmd, int *rc)
-{
-        int interval;
-
-        if (sscanf(cmd, "watchdog %d", &interval) != 1)
-                return 0;
-
-        if (interval < 0 || interval > 120)
-                *rc = -EINVAL;
-        else
-                fan_watchdog_maxinterval = interval;
-
-        return 1;
-}
-
-static int fan_write(char *buf)
-{
-        char *cmd;
-        int rc = 0;
-
-        while (!rc && (cmd = next_cmd(&buf))) {
-                if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) &&
-                      fan_write_cmd_level(cmd, &rc)) &&
-                    !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) &&
-                      (fan_write_cmd_enable(cmd, &rc) ||
-                       fan_write_cmd_disable(cmd, &rc) ||
-                       fan_write_cmd_watchdog(cmd, &rc))) &&
-                    !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) &&
-                      fan_write_cmd_speed(cmd, &rc))
-                    )
-                        rc = -EINVAL;
-                else if (!rc)
-                        fan_watchdog_reset();
-        }
-
-        return rc;
-}
-
-static void fan_watchdog_fire(struct work_struct *ignored)
-{
-        printk(IBM_NOTICE "fan watchdog: enabling fan\n");
-        if (fan_set_enable()) {
-                printk(IBM_ERR "fan watchdog: error while enabling fan\n");
-                /* reschedule for later */
-                fan_watchdog_reset();
-        }
-}
-
-static struct ibm_struct ibms[] = {
-        {
-         .name = "driver",
-         .init = ibm_acpi_driver_init,
-         .read = driver_read,
-         },
-        {
-         .name = "hotkey",
-         .hid = IBM_HKEY_HID,
-         .init = hotkey_init,
-         .read = hotkey_read,
-         .write = hotkey_write,
-         .exit = hotkey_exit,
-         .notify = hotkey_notify,
-         .handle = &hkey_handle,
-         .type = ACPI_DEVICE_NOTIFY,
-         },
-        {
-         .name = "bluetooth",
-         .init = bluetooth_init,
-         .read = bluetooth_read,
-         .write = bluetooth_write,
-         },
-        {
-         .name = "wan",
-         .init = wan_init,
-         .read = wan_read,
-         .write = wan_write,
-         .experimental = 1,
-         },
-        {
-         .name = "video",
-         .init = video_init,
-         .read = video_read,
-         .write = video_write,
-         .exit = video_exit,
-         },
-        {
-         .name = "light",
-         .init = light_init,
-         .read = light_read,
-         .write = light_write,
-         },
-#ifdef CONFIG_ACPI_IBM_DOCK
-        {
-         .name = "dock",
-         .read = dock_read,
-         .write = dock_write,
-         .notify = dock_notify,
-         .handle = &dock_handle,
-         .type = ACPI_SYSTEM_NOTIFY,
-         },
-        {
-         .name = "dock",
-         .hid = IBM_PCI_HID,
-         .notify = dock_notify,
-         .handle = &pci_handle,
-         .type = ACPI_SYSTEM_NOTIFY,
-         },
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-        {
-         .name = "bay",
-         .init = bay_init,
-         .read = bay_read,
-         .write = bay_write,
-         .notify = bay_notify,
-         .handle = &bay_handle,
-         .type = ACPI_SYSTEM_NOTIFY,
-         },
-#endif /* CONFIG_ACPI_IBM_BAY */
-        {
-         .name = "cmos",
-         .read = cmos_read,
-         .write = cmos_write,
-         },
-        {
-         .name = "led",
-         .init = led_init,
-         .read = led_read,
-         .write = led_write,
-         },
-        {
-         .name = "beep",
-         .read = beep_read,
-         .write = beep_write,
-         },
-        {
-         .name = "thermal",
-         .init = thermal_init,
-         .read = thermal_read,
-         },
-        {
-         .name = "ecdump",
-         .read = ecdump_read,
-         .write = ecdump_write,
-         .experimental = 1,
-         },
-        {
-         .name = "brightness",
-         .read = brightness_read,
-         .write = brightness_write,
-         .init = brightness_init,
-         .exit = brightness_exit,
-         },
-        {
-         .name = "volume",
-         .read = volume_read,
-         .write = volume_write,
-         },
-        {
-         .name = "fan",
-         .read = fan_read,
-         .write = fan_write,
-         .init = fan_init,
-         .exit = fan_exit,
-         .experimental = 1,
-         },
-};
-
-static int dispatch_read(char *page, char **start, off_t off, int count,
-                         int *eof, void *data)
-{
-        struct ibm_struct *ibm = data;
-        int len;
-
-        if (!ibm || !ibm->read)
-                return -EINVAL;
-
-        len = ibm->read(page);
-        if (len < 0)
-                return len;
-
-        if (len <= off + count)
-                *eof = 1;
-        *start = page + off;
-        len -= off;
-        if (len > count)
-                len = count;
-        if (len < 0)
-                len = 0;
-
-        return len;
-}
-
-static int dispatch_write(struct file *file, const char __user * userbuf,
-                          unsigned long count, void *data)
-{
-        struct ibm_struct *ibm = data;
-        char *kernbuf;
-        int ret;
-
-        if (!ibm || !ibm->write)
-                return -EINVAL;
-
-        kernbuf = kmalloc(count + 2, GFP_KERNEL);
-        if (!kernbuf)
-                return -ENOMEM;
-
-        if (copy_from_user(kernbuf, userbuf, count)) {
-                kfree(kernbuf);
-                return -EFAULT;
-        }
-
-        kernbuf[count] = 0;
-        strcat(kernbuf, ",");
-        ret = ibm->write(kernbuf);
-        if (ret == 0)
-                ret = count;
-
-        kfree(kernbuf);
-
-        return ret;
-}
-
-static void dispatch_notify(acpi_handle handle, u32 event, void *data)
-{
-        struct ibm_struct *ibm = data;
-
-        if (!ibm || !ibm->notify)
-                return;
-
-        ibm->notify(ibm, event);
-}
-
-static int __init setup_notify(struct ibm_struct *ibm)
-{
-        acpi_status status;
-        int ret;
-
-        if (!*ibm->handle)
-                return 0;
-
-        ret = acpi_bus_get_device(*ibm->handle, &ibm->device);
-        if (ret < 0) {
-                printk(IBM_ERR "%s device not present\n", ibm->name);
-                return -ENODEV;
-        }
-
-        acpi_driver_data(ibm->device) = ibm;
-        sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name);
-
-        status = acpi_install_notify_handler(*ibm->handle, ibm->type,
-                                             dispatch_notify, ibm);
-        if (ACPI_FAILURE(status)) {
-                if (status == AE_ALREADY_EXISTS) {
-                        printk(IBM_NOTICE "another device driver is already handling %s events\n",
-                                ibm->name);
-                } else {
-                        printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
-                                ibm->name, status);
-                }
-                return -ENODEV;
-        }
-        ibm->notify_installed = 1;
-        return 0;
-}
-
-static int __init ibm_device_add(struct acpi_device *device)
-{
-        return 0;
-}
-
-static int __init register_driver(struct ibm_struct *ibm)
-{
-        int ret;
-
-        ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
-        if (!ibm->driver) {
-                printk(IBM_ERR "kmalloc(ibm->driver) failed\n");
-                return -1;
-        }
-
-        sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name);
-        ibm->driver->ids = ibm->hid;
-        ibm->driver->ops.add = &ibm_device_add;
-
-        ret = acpi_bus_register_driver(ibm->driver);
-        if (ret < 0) {
-                printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
-                       ibm->hid, ret);
-                kfree(ibm->driver);
-        }
-
-        return ret;
-}
-
-static void ibm_exit(struct ibm_struct *ibm);
-
-static int __init ibm_init(struct ibm_struct *ibm)
-{
-        int ret;
-        struct proc_dir_entry *entry;
-
-        if (ibm->experimental && !experimental)
-                return 0;
-
-        if (ibm->hid) {
-                ret = register_driver(ibm);
-                if (ret < 0)
-                        return ret;
-                ibm->driver_registered = 1;
-        }
-
-        if (ibm->init) {
-                ret = ibm->init();
-                if (ret != 0)
-                        return ret;
-                ibm->init_called = 1;
-        }
-
-        if (ibm->read) {
-                entry = create_proc_entry(ibm->name,
-                                          S_IFREG | S_IRUGO | S_IWUSR,
-                                          proc_dir);
-                if (!entry) {
-                        printk(IBM_ERR "unable to create proc entry %s\n",
-                               ibm->name);
-                        return -ENODEV;
-                }
-                entry->owner = THIS_MODULE;
-                entry->data = ibm;
-                entry->read_proc = &dispatch_read;
-                if (ibm->write)
-                        entry->write_proc = &dispatch_write;
-                ibm->proc_created = 1;
-        }
-
-        if (ibm->notify) {
-                ret = setup_notify(ibm);
-                if (ret == -ENODEV) {
-                        printk(IBM_NOTICE "disabling subdriver %s\n",
-                                ibm->name);
-                        ibm_exit(ibm);
-                        return 0;
-                }
-                if (ret < 0)
-                        return ret;
-        }
-
-        return 0;
-}
-
-static void ibm_exit(struct ibm_struct *ibm)
-{
-        if (ibm->notify_installed)
-                acpi_remove_notify_handler(*ibm->handle, ibm->type,
-                                           dispatch_notify);
-
-        if (ibm->proc_created)
-                remove_proc_entry(ibm->name, proc_dir);
-
-        if (ibm->init_called && ibm->exit)
-                ibm->exit();
-
-        if (ibm->driver_registered) {
-                acpi_bus_unregister_driver(ibm->driver);
-                kfree(ibm->driver);
-        }
-}
-
-static void __init ibm_handle_init(char *name,
-                                   acpi_handle * handle, acpi_handle parent,
-                                   char **paths, int num_paths, char **path)
-{
-        int i;
-        acpi_status status;
-
-        for (i = 0; i < num_paths; i++) {
-                status = acpi_get_handle(parent, paths[i], handle);
-                if (ACPI_SUCCESS(status)) {
-                        *path = paths[i];
-                        return;
-                }
-        }
-
-        *handle = NULL;
-}
-
-#define IBM_HANDLE_INIT(object)                                         \
-        ibm_handle_init(#object, &object##_handle, *object##_parent,    \
-                object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
-
-static int __init set_ibm_param(const char *val, struct kernel_param *kp)
-{
-        unsigned int i;
-
-        for (i = 0; i < ARRAY_SIZE(ibms); i++)
-                if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) {
-                        if (strlen(val) > sizeof(ibms[i].param) - 2)
-                                return -ENOSPC;
-                        strcpy(ibms[i].param, val);
-                        strcat(ibms[i].param, ",");
-                        return 0;
-                }
-
-        return -EINVAL;
-}
-
-#define IBM_PARAM(feature) \
-        module_param_call(feature, set_ibm_param, NULL, NULL, 0)
-
-IBM_PARAM(hotkey);
-IBM_PARAM(bluetooth);
-IBM_PARAM(video);
-IBM_PARAM(light);
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_PARAM(dock);
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_PARAM(bay);
-#endif /* CONFIG_ACPI_IBM_BAY */
-IBM_PARAM(cmos);
-IBM_PARAM(led);
-IBM_PARAM(beep);
-IBM_PARAM(ecdump);
-IBM_PARAM(brightness);
-IBM_PARAM(volume);
-IBM_PARAM(fan);
-
-static void acpi_ibm_exit(void)
-{
-        int i;
-
-        for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--)
-                ibm_exit(&ibms[i]);
-
-        if (proc_dir)
-                remove_proc_entry(IBM_DIR, acpi_root_dir);
-
-        if (ibm_thinkpad_ec_found)
-                kfree(ibm_thinkpad_ec_found);
-}
-
-static char* __init check_dmi_for_ec(void)
-{
-        struct dmi_device *dev = NULL;
-        char ec_fw_string[18];
-
-        /*
-         * ThinkPad T23 or newer, A31 or newer, R50e or newer,
-         * X32 or newer, all Z series;  Some models must have an
-         * up-to-date BIOS or they will not be detected.
-         *
-         * See http://thinkwiki.org/wiki/List_of_DMI_IDs
-         */
-        while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
-                if (sscanf(dev->name,
-                           "IBM ThinkPad Embedded Controller -[%17c",
-                           ec_fw_string) == 1) {
-                        ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
-                        ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
-                        return kstrdup(ec_fw_string, GFP_KERNEL);
-                }
-        }
-        return NULL;
-}
-
-static int __init acpi_ibm_init(void)
-{
-        int ret, i;
-
-        if (acpi_disabled)
-                return -ENODEV;
-
-        /* ec is required because many other handles are relative to it */
-        IBM_HANDLE_INIT(ec);
-        if (!ec_handle) {
-                printk(IBM_ERR "ec object not found\n");
-                return -ENODEV;
-        }
-
-        /* Models with newer firmware report the EC in DMI */
-        ibm_thinkpad_ec_found = check_dmi_for_ec();
-
-        /* these handles are not required */
-        IBM_HANDLE_INIT(vid);
-        IBM_HANDLE_INIT(vid2);
-        IBM_HANDLE_INIT(ledb);
-        IBM_HANDLE_INIT(led);
-        IBM_HANDLE_INIT(hkey);
-        IBM_HANDLE_INIT(lght);
-        IBM_HANDLE_INIT(cmos);
-#ifdef CONFIG_ACPI_IBM_DOCK
-        IBM_HANDLE_INIT(dock);
-#endif
-        IBM_HANDLE_INIT(pci);
-#ifdef CONFIG_ACPI_IBM_BAY
-        IBM_HANDLE_INIT(bay);
-        if (bay_handle)
-                IBM_HANDLE_INIT(bay_ej);
-        IBM_HANDLE_INIT(bay2);
-        if (bay2_handle)
-                IBM_HANDLE_INIT(bay2_ej);
-#endif /* CONFIG_ACPI_IBM_BAY */
-        IBM_HANDLE_INIT(beep);
-        IBM_HANDLE_INIT(ecrd);
-        IBM_HANDLE_INIT(ecwr);
-        IBM_HANDLE_INIT(fans);
-        IBM_HANDLE_INIT(gfan);
-        IBM_HANDLE_INIT(sfan);
-
-        proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir);
-        if (!proc_dir) {
-                printk(IBM_ERR "unable to create proc dir %s", IBM_DIR);
-                acpi_ibm_exit();
-                return -ENODEV;
-        }
-        proc_dir->owner = THIS_MODULE;
-
-        for (i = 0; i < ARRAY_SIZE(ibms); i++) {
-                ret = ibm_init(&ibms[i]);
-                if (ret >= 0 && *ibms[i].param)
-                        ret = ibms[i].write(ibms[i].param);
-                if (ret < 0) {
-                        acpi_ibm_exit();
-                        return ret;
-                }
-        }
-
-        return 0;
-}
-
-module_init(acpi_ibm_init);
-module_exit(acpi_ibm_exit);
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 99d1516d1e70..f7de02a6f497 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -70,8 +70,6 @@
 #define ACPI_PROCESSOR_LIMIT_USER       0
 #define ACPI_PROCESSOR_LIMIT_THERMAL    1
 
-#define ACPI_STA_PRESENT 0x00000001
-
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_core");
 
@@ -779,7 +777,7 @@ static int is_processor_present(acpi_handle handle)
 
 
         status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-        if (ACPI_FAILURE(status) || !(sta & ACPI_STA_PRESENT)) {
+        if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) {
                 ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present"));
                 return 0;
         }
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index cdf78943af4d..ae0654cd11ea 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -51,14 +51,6 @@
 #include <asm/apic.h>
 #endif
 
-/*
- * Include the apic definitions for x86 to have the APIC timer related defines
- * available also for UP (on SMP it gets magically included via linux/smp.h).
- */
-#ifdef CONFIG_X86
-#include <asm/apic.h>
-#endif
-
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index 59640d9a0acc..c1bae106833c 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -30,30 +30,10 @@
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
 #include <linux/acpi.h>
-#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
 #include <linux/delay.h>
 
-#include "i2c_ec.h"
-
-#define DEF_CAPACITY_UNIT       3
-#define MAH_CAPACITY_UNIT       1
-#define MWH_CAPACITY_UNIT       2
-#define CAPACITY_UNIT           DEF_CAPACITY_UNIT
-
-#define REQUEST_UPDATE_MODE     1
-#define QUEUE_UPDATE_MODE       2
-
-#define DATA_TYPE_COMMON        0
-#define DATA_TYPE_INFO          1
-#define DATA_TYPE_STATE         2
-#define DATA_TYPE_ALARM         3
-#define DATA_TYPE_AC_STATE      4
-
-extern struct proc_dir_entry *acpi_lock_ac_dir(void);
-extern struct proc_dir_entry *acpi_lock_battery_dir(void);
-extern void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
-extern void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir);
-
 #define ACPI_SBS_COMPONENT              0x00080000
 #define ACPI_SBS_CLASS                  "sbs"
 #define ACPI_AC_CLASS                   "ac_adapter"
@@ -74,39 +54,75 @@ extern void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir);
 
 #define _COMPONENT                      ACPI_SBS_COMPONENT
 
-#define MAX_SBS_BAT                     4
-#define MAX_SMBUS_ERR                   1
-
 ACPI_MODULE_NAME("sbs");
 
 MODULE_AUTHOR("Rich Townsend");
 MODULE_DESCRIPTION("Smart Battery System ACPI interface driver");
 MODULE_LICENSE("GPL");
 
-static struct semaphore sbs_sem;
+#define xmsleep(t)      msleep(t)
+
+#define ACPI_EC_SMB_PRTCL       0x00    /* protocol, PEC */
+
+#define ACPI_EC_SMB_STS         0x01    /* status */
+#define ACPI_EC_SMB_ADDR        0x02    /* address */
+#define ACPI_EC_SMB_CMD         0x03    /* command */
+#define ACPI_EC_SMB_DATA        0x04    /* 32 data registers */
+#define ACPI_EC_SMB_BCNT        0x24    /* number of data bytes */
 
-#define UPDATE_MODE             QUEUE_UPDATE_MODE
-/* REQUEST_UPDATE_MODE  QUEUE_UPDATE_MODE */
-#define UPDATE_INFO_MODE        0
-#define UPDATE_TIME             60
-#define UPDATE_TIME2            0
+#define ACPI_EC_SMB_STS_DONE    0x80
+#define ACPI_EC_SMB_STS_STATUS  0x1f
 
-static int capacity_mode = CAPACITY_UNIT;
-static int update_mode = UPDATE_MODE;
-static int update_info_mode = UPDATE_INFO_MODE;
-static int update_time = UPDATE_TIME;
-static int update_time2 = UPDATE_TIME2;
+#define ACPI_EC_SMB_PRTCL_WRITE         0x00
+#define ACPI_EC_SMB_PRTCL_READ          0x01
+#define ACPI_EC_SMB_PRTCL_WORD_DATA     0x08
+#define ACPI_EC_SMB_PRTCL_BLOCK_DATA    0x0a
 
-module_param(capacity_mode, int, 0);
-module_param(update_mode, int, 0);
-module_param(update_info_mode, int, 0);
-module_param(update_time, int, 0);
-module_param(update_time2, int, 0);
+#define ACPI_EC_SMB_TRANSACTION_SLEEP   1
+#define ACPI_EC_SMB_ACCESS_SLEEP1       1
+#define ACPI_EC_SMB_ACCESS_SLEEP2       10
+
+#define DEF_CAPACITY_UNIT       3
+#define MAH_CAPACITY_UNIT       1
+#define MWH_CAPACITY_UNIT       2
+#define CAPACITY_UNIT           DEF_CAPACITY_UNIT
+
+#define REQUEST_UPDATE_MODE     1
+#define QUEUE_UPDATE_MODE       2
+
+#define DATA_TYPE_COMMON        0
+#define DATA_TYPE_INFO          1
+#define DATA_TYPE_STATE         2
+#define DATA_TYPE_ALARM         3
+#define DATA_TYPE_AC_STATE      4
+
+extern struct proc_dir_entry *acpi_lock_ac_dir(void);
+extern struct proc_dir_entry *acpi_lock_battery_dir(void);
+extern void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
+extern void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir);
+
+#define MAX_SBS_BAT                     4
+#define ACPI_SBS_BLOCK_MAX              32
+
+#define ACPI_SBS_SMBUS_READ             1
+#define ACPI_SBS_SMBUS_WRITE            2
+
+#define ACPI_SBS_WORD_DATA              1
+#define ACPI_SBS_BLOCK_DATA             2
+
+#define UPDATE_DELAY    10
+
+/* 0 - every time, > 0 - by update_time */
+static unsigned int update_time = 120;
+
+static unsigned int capacity_mode = CAPACITY_UNIT;
+
+module_param(update_time, uint, 0644);
+module_param(capacity_mode, uint, 0444);
 
 static int acpi_sbs_add(struct acpi_device *device);
 static int acpi_sbs_remove(struct acpi_device *device, int type);
-static void acpi_battery_smbus_err_handler(struct acpi_ec_smbus *smbus);
-static void acpi_sbs_update_queue(void *data);
+static int acpi_sbs_resume(struct acpi_device *device);
 
 static struct acpi_driver acpi_sbs_driver = {
         .name = "sbs",
@@ -115,9 +131,14 @@ static struct acpi_driver acpi_sbs_driver = {
         .ops = {
                 .add = acpi_sbs_add,
                 .remove = acpi_sbs_remove,
+                .resume = acpi_sbs_resume,
                 },
 };
 
+struct acpi_ac {
+        int ac_present;
+};
+
 struct acpi_battery_info {
         int capacity_mode;
         s16 full_charge_capacity;
@@ -126,18 +147,16 @@ struct acpi_battery_info {
         int vscale;
         int ipscale;
         s16 serial_number;
-        char manufacturer_name[I2C_SMBUS_BLOCK_MAX + 3];
-        char device_name[I2C_SMBUS_BLOCK_MAX + 3];
-        char device_chemistry[I2C_SMBUS_BLOCK_MAX + 3];
+        char manufacturer_name[ACPI_SBS_BLOCK_MAX + 3];
+        char device_name[ACPI_SBS_BLOCK_MAX + 3];
+        char device_chemistry[ACPI_SBS_BLOCK_MAX + 3];
 };
 
 struct acpi_battery_state {
         s16 voltage;
         s16 amperage;
         s16 remaining_capacity;
-        s16 average_time_to_empty;
-        s16 average_time_to_full;
-        s16 battery_status;
+        s16 battery_state;
 };
 
 struct acpi_battery_alarm {
@@ -146,9 +165,9 @@ struct acpi_battery_alarm {
 
 struct acpi_battery {
         int alive;
-        int battery_present;
         int id;
         int init_state;
+        int battery_present;
         struct acpi_sbs *sbs;
         struct acpi_battery_info info;
         struct acpi_battery_state state;
@@ -158,186 +177,251 @@ struct acpi_battery {
 
 struct acpi_sbs {
         acpi_handle handle;
+        int base;
         struct acpi_device *device;
         struct acpi_ec_smbus *smbus;
+        struct mutex mutex;
         int sbsm_present;
         int sbsm_batteries_supported;
-        int ac_present;
         struct proc_dir_entry *ac_entry;
+        struct acpi_ac ac;
         struct acpi_battery battery[MAX_SBS_BAT];
-        int update_info_mode;
         int zombie;
-        int update_time;
-        int update_time2;
         struct timer_list update_timer;
+        int run_cnt;
+        int update_proc_flg;
 };
 
-static void acpi_update_delay(struct acpi_sbs *sbs);
-static int acpi_sbs_update_run(struct acpi_sbs *sbs, int data_type);
+static int acpi_sbs_update_run(struct acpi_sbs *sbs, int id, int data_type);
+static void acpi_sbs_update_time(void *data);
+
+union sbs_rw_data {
+        u16 word;
+        u8 block[ACPI_SBS_BLOCK_MAX + 2];
+};
+
+static int acpi_ec_sbs_access(struct acpi_sbs *sbs, u16 addr,
+                              char read_write, u8 command, int size,
+                              union sbs_rw_data *data);
 
 /* --------------------------------------------------------------------------
                                SMBus Communication
    -------------------------------------------------------------------------- */
 
-static void acpi_battery_smbus_err_handler(struct acpi_ec_smbus *smbus)
+static int acpi_ec_sbs_read(struct acpi_sbs *sbs, u8 address, u8 * data)
 {
-        union i2c_smbus_data data;
-        int result = 0;
-        char *err_str;
-        int err_number;
+        u8 val;
+        int err;
 
-        data.word = 0;
+        err = ec_read(sbs->base + address, &val);
+        if (!err) {
+                *data = val;
+        }
+        xmsleep(ACPI_EC_SMB_TRANSACTION_SLEEP);
+        return (err);
+}
 
-        result = smbus->adapter.algo->
-            smbus_xfer(&smbus->adapter,
-                       ACPI_SB_SMBUS_ADDR,
-                       0, I2C_SMBUS_READ, 0x16, I2C_SMBUS_BLOCK_DATA, &data);
+static int acpi_ec_sbs_write(struct acpi_sbs *sbs, u8 address, u8 data)
+{
+        int err;
 
-        err_number = (data.word & 0x000f);
+        err = ec_write(sbs->base + address, data);
+        return (err);
+}
 
-        switch (data.word & 0x000f) {
-        case 0x0000:
-                err_str = "unexpected bus error";
-                break;
-        case 0x0001:
-                err_str = "busy";
-                break;
-        case 0x0002:
-                err_str = "reserved command";
-                break;
-        case 0x0003:
-                err_str = "unsupported command";
-                break;
-        case 0x0004:
-                err_str = "access denied";
+static int
+acpi_ec_sbs_access(struct acpi_sbs *sbs, u16 addr,
+                   char read_write, u8 command, int size,
+                   union sbs_rw_data *data)
+{
+        unsigned char protocol, len = 0, temp[2] = { 0, 0 };
+        int i;
+
+        if (read_write == ACPI_SBS_SMBUS_READ) {
+                protocol = ACPI_EC_SMB_PRTCL_READ;
+        } else {
+                protocol = ACPI_EC_SMB_PRTCL_WRITE;
+        }
+
+        switch (size) {
+
+        case ACPI_SBS_WORD_DATA:
+                acpi_ec_sbs_write(sbs, ACPI_EC_SMB_CMD, command);
+                if (read_write == ACPI_SBS_SMBUS_WRITE) {
+                        acpi_ec_sbs_write(sbs, ACPI_EC_SMB_DATA, data->word);
+                        acpi_ec_sbs_write(sbs, ACPI_EC_SMB_DATA + 1,
+                                          data->word >> 8);
+                }
+                protocol |= ACPI_EC_SMB_PRTCL_WORD_DATA;
                 break;
-        case 0x0005:
-                err_str = "overflow/underflow";
+        case ACPI_SBS_BLOCK_DATA:
+                acpi_ec_sbs_write(sbs, ACPI_EC_SMB_CMD, command);
+                if (read_write == ACPI_SBS_SMBUS_WRITE) {
+                        len = min_t(u8, data->block[0], 32);
+                        acpi_ec_sbs_write(sbs, ACPI_EC_SMB_BCNT, len);
+                        for (i = 0; i < len; i++)
+                                acpi_ec_sbs_write(sbs, ACPI_EC_SMB_DATA + i,
+                                                  data->block[i + 1]);
+                }
+                protocol |= ACPI_EC_SMB_PRTCL_BLOCK_DATA;
                 break;
-        case 0x0006:
-                err_str = "bad size";
+        default:
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "unsupported transaction %d", size));
+                return (-1);
+        }
+
+        acpi_ec_sbs_write(sbs, ACPI_EC_SMB_ADDR, addr << 1);
+        acpi_ec_sbs_write(sbs, ACPI_EC_SMB_PRTCL, protocol);
+
+        acpi_ec_sbs_read(sbs, ACPI_EC_SMB_STS, temp);
+
+        if (~temp[0] & ACPI_EC_SMB_STS_DONE) {
+                xmsleep(ACPI_EC_SMB_ACCESS_SLEEP1);
+                acpi_ec_sbs_read(sbs, ACPI_EC_SMB_STS, temp);
+        }
+        if (~temp[0] & ACPI_EC_SMB_STS_DONE) {
+                xmsleep(ACPI_EC_SMB_ACCESS_SLEEP2);
+                acpi_ec_sbs_read(sbs, ACPI_EC_SMB_STS, temp);
+        }
+        if ((~temp[0] & ACPI_EC_SMB_STS_DONE)
+            || (temp[0] & ACPI_EC_SMB_STS_STATUS)) {
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "transaction %d error", size));
+                return (-1);
+        }
+
+        if (read_write == ACPI_SBS_SMBUS_WRITE) {
+                return (0);
+        }
+
+        switch (size) {
+
+        case ACPI_SBS_WORD_DATA:
+                acpi_ec_sbs_read(sbs, ACPI_EC_SMB_DATA, temp);
+                acpi_ec_sbs_read(sbs, ACPI_EC_SMB_DATA + 1, temp + 1);
+                data->word = (temp[1] << 8) | temp[0];
                 break;
-        case 0x0007:
-                err_str = "unknown error";
+
+        case ACPI_SBS_BLOCK_DATA:
+                len = 0;
+                acpi_ec_sbs_read(sbs, ACPI_EC_SMB_BCNT, &len);
+                len = min_t(u8, len, 32);
+                for (i = 0; i < len; i++)
+                        acpi_ec_sbs_read(sbs, ACPI_EC_SMB_DATA + i,
+                                         data->block + i + 1);
+                data->block[0] = len;
                 break;
         default:
-                err_str = "unrecognized error";
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "unsupported transaction %d", size));
+                return (-1);
         }
-        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                          "%s: ret %i, err %i\n", err_str, result, err_number));
+
+        return (0);
 }
 
 static int
-acpi_sbs_smbus_read_word(struct acpi_ec_smbus *smbus, int addr, int func,
-                         u16 * word,
-                         void (*err_handler) (struct acpi_ec_smbus * smbus))
+acpi_sbs_read_word(struct acpi_sbs *sbs, int addr, int func, u16 * word)
 {
-        union i2c_smbus_data data;
+        union sbs_rw_data data;
         int result = 0;
-        int i;
 
-        if (err_handler == NULL) {
-                err_handler = acpi_battery_smbus_err_handler;
-        }
-
-        for (i = 0; i < MAX_SMBUS_ERR; i++) {
-                result =
-                    smbus->adapter.algo->smbus_xfer(&smbus->adapter, addr, 0,
-                                                    I2C_SMBUS_READ, func,
-                                                    I2C_SMBUS_WORD_DATA, &data);
-                if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "try %i: smbus->adapter.algo->smbus_xfer() failed\n",
-                                          i));
-                        if (err_handler) {
-                                err_handler(smbus);
-                        }
-                } else {
-                        *word = data.word;
-                        break;
-                }
+        result = acpi_ec_sbs_access(sbs, addr,
+                                    ACPI_SBS_SMBUS_READ, func,
+                                    ACPI_SBS_WORD_DATA, &data);
+        if (result) {
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_ec_sbs_access() failed"));
+        } else {
+                *word = data.word;
         }
 
         return result;
 }
 
 static int
-acpi_sbs_smbus_read_str(struct acpi_ec_smbus *smbus, int addr, int func,
-                        char *str,
-                        void (*err_handler) (struct acpi_ec_smbus * smbus))
+acpi_sbs_read_str(struct acpi_sbs *sbs, int addr, int func, char *str)
 {
-        union i2c_smbus_data data;
+        union sbs_rw_data data;
         int result = 0;
-        int i;
-
-        if (err_handler == NULL) {
-                err_handler = acpi_battery_smbus_err_handler;
-        }
 
-        for (i = 0; i < MAX_SMBUS_ERR; i++) {
-                result =
-                    smbus->adapter.algo->smbus_xfer(&smbus->adapter, addr, 0,
-                                                    I2C_SMBUS_READ, func,
-                                                    I2C_SMBUS_BLOCK_DATA,
-                                                    &data);
-                if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "try %i: smbus->adapter.algo->smbus_xfer() failed\n",
-                                          i));
-                        if (err_handler) {
-                                err_handler(smbus);
-                        }
-                } else {
-                        strncpy(str, (const char *)data.block + 1,
-                                data.block[0]);
-                        str[data.block[0]] = 0;
-                        break;
-                }
+        result = acpi_ec_sbs_access(sbs, addr,
+                                    ACPI_SBS_SMBUS_READ, func,
+                                    ACPI_SBS_BLOCK_DATA, &data);
+        if (result) {
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_ec_sbs_access() failed"));
+        } else {
+                strncpy(str, (const char *)data.block + 1, data.block[0]);
+                str[data.block[0]] = 0;
         }
 
         return result;
 }
 
 static int
-acpi_sbs_smbus_write_word(struct acpi_ec_smbus *smbus, int addr, int func,
-                          int word,
-                          void (*err_handler) (struct acpi_ec_smbus * smbus))
+acpi_sbs_write_word(struct acpi_sbs *sbs, int addr, int func, int word)
 {
-        union i2c_smbus_data data;
+        union sbs_rw_data data;
         int result = 0;
-        int i;
-
-        if (err_handler == NULL) {
-                err_handler = acpi_battery_smbus_err_handler;
-        }
 
         data.word = word;
 
-        for (i = 0; i < MAX_SMBUS_ERR; i++) {
-                result =
-                    smbus->adapter.algo->smbus_xfer(&smbus->adapter, addr, 0,
-                                                    I2C_SMBUS_WRITE, func,
-                                                    I2C_SMBUS_WORD_DATA, &data);
-                if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "try %i: smbus->adapter.algo"
-                                          "->smbus_xfer() failed\n", i));
-                        if (err_handler) {
-                                err_handler(smbus);
-                        }
-                } else {
-                        break;
-                }
+        result = acpi_ec_sbs_access(sbs, addr,
+                                    ACPI_SBS_SMBUS_WRITE, func,
+                                    ACPI_SBS_WORD_DATA, &data);
+        if (result) {
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_ec_sbs_access() failed"));
         }
 
         return result;
 }
 
+static int sbs_zombie(struct acpi_sbs *sbs)
+{
+        return (sbs->zombie);
+}
+
+static int sbs_mutex_lock(struct acpi_sbs *sbs)
+{
+        if (sbs_zombie(sbs)) {
+                return -ENODEV;
+        }
+        mutex_lock(&sbs->mutex);
+        return 0;
+}
+
+static void sbs_mutex_unlock(struct acpi_sbs *sbs)
+{
+        mutex_unlock(&sbs->mutex);
+}
+
 /* --------------------------------------------------------------------------
                             Smart Battery System Management
    -------------------------------------------------------------------------- */
 
-/* Smart Battery */
+static int acpi_check_update_proc(struct acpi_sbs *sbs)
+{
+        acpi_status status = AE_OK;
+
+        if (update_time == 0) {
+                sbs->update_proc_flg = 0;
+                return 0;
+        }
+        if (sbs->update_proc_flg == 0) {
+                status = acpi_os_execute(OSL_GPE_HANDLER,
+                                         acpi_sbs_update_time, sbs);
+                if (status != AE_OK) {
+                        ACPI_EXCEPTION((AE_INFO, status,
+                                        "acpi_os_execute() failed"));
+                        return 1;
+                }
+                sbs->update_proc_flg = 1;
+        }
+        return 0;
+}
 
 static int acpi_sbs_generate_event(struct acpi_device *device,
                                    int event, int state, char *bid, char *class)
@@ -366,12 +450,11 @@ static int acpi_battery_get_present(struct acpi_battery *battery)
         int result = 0;
         int is_present = 0;
 
-        result = acpi_sbs_smbus_read_word(battery->sbs->smbus,
-                                          ACPI_SBSM_SMBUS_ADDR, 0x01,
-                                          &state, NULL);
+        result = acpi_sbs_read_word(battery->sbs,
+                                    ACPI_SBSM_SMBUS_ADDR, 0x01, &state);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
         }
         if (!result) {
                 is_present = (state & 0x000f) & (1 << battery->id);
@@ -381,45 +464,33 @@ static int acpi_battery_get_present(struct acpi_battery *battery)
         return result;
 }
 
-static int acpi_battery_is_present(struct acpi_battery *battery)
-{
-        return (battery->battery_present);
-}
-
-static int acpi_ac_is_present(struct acpi_sbs *sbs)
-{
-        return (sbs->ac_present);
-}
-
 static int acpi_battery_select(struct acpi_battery *battery)
 {
-        struct acpi_ec_smbus *smbus = battery->sbs->smbus;
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
         s16 state;
         int foo;
 
-        if (battery->sbs->sbsm_present) {
+        if (sbs->sbsm_present) {
 
                 /* Take special care not to knobble other nibbles of
                  * state (aka selector_state), since
                  * it causes charging to halt on SBSELs */
 
                 result =
-                    acpi_sbs_smbus_read_word(smbus, ACPI_SBSM_SMBUS_ADDR, 0x01,
-                                             &state, NULL);
+                    acpi_sbs_read_word(sbs, ACPI_SBSM_SMBUS_ADDR, 0x01, &state);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_smbus_read_word() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_read_word() failed"));
                         goto end;
                 }
 
                 foo = (state & 0x0fff) | (1 << (battery->id + 12));
                 result =
-                    acpi_sbs_smbus_write_word(smbus, ACPI_SBSM_SMBUS_ADDR, 0x01,
-                                              foo, NULL);
+                    acpi_sbs_write_word(sbs, ACPI_SBSM_SMBUS_ADDR, 0x01, foo);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_smbus_write_word() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_write_word() failed"));
                         goto end;
                 }
         }
@@ -430,15 +501,14 @@ static int acpi_battery_select(struct acpi_battery *battery)
 
 static int acpi_sbsm_get_info(struct acpi_sbs *sbs)
 {
-        struct acpi_ec_smbus *smbus = sbs->smbus;
         int result = 0;
         s16 battery_system_info;
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SBSM_SMBUS_ADDR, 0x04,
-                                          &battery_system_info, NULL);
+        result = acpi_sbs_read_word(sbs, ACPI_SBSM_SMBUS_ADDR, 0x04,
+                                    &battery_system_info);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
@@ -451,53 +521,50 @@ static int acpi_sbsm_get_info(struct acpi_sbs *sbs)
 
 static int acpi_battery_get_info(struct acpi_battery *battery)
 {
-        struct acpi_ec_smbus *smbus = battery->sbs->smbus;
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
         s16 battery_mode;
         s16 specification_info;
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x03,
-                                          &battery_mode,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x03,
+                                    &battery_mode);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
         battery->info.capacity_mode = (battery_mode & 0x8000) >> 15;
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x10,
-                                          &battery->info.full_charge_capacity,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x10,
+                                    &battery->info.full_charge_capacity);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x18,
-                                          &battery->info.design_capacity,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x18,
+                                    &battery->info.design_capacity);
 
         if (result) {
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x19,
-                                          &battery->info.design_voltage,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x19,
+                                    &battery->info.design_voltage);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x1a,
-                                          &specification_info,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x1a,
+                                    &specification_info);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
@@ -529,37 +596,35 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
                 battery->info.ipscale = 1;
         }
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x1c,
-                                          &battery->info.serial_number,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x1c,
+                                    &battery->info.serial_number);
         if (result) {
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_str(smbus, ACPI_SB_SMBUS_ADDR, 0x20,
-                                         battery->info.manufacturer_name,
-                                         &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_str(sbs, ACPI_SB_SMBUS_ADDR, 0x20,
+                                   battery->info.manufacturer_name);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_str() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_str() failed"));
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_str(smbus, ACPI_SB_SMBUS_ADDR, 0x21,
-                                         battery->info.device_name,
-                                         &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_str(sbs, ACPI_SB_SMBUS_ADDR, 0x21,
+                                   battery->info.device_name);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_str() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_str() failed"));
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_str(smbus, ACPI_SB_SMBUS_ADDR, 0x22,
-                                         battery->info.device_chemistry,
-                                         &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_str(sbs, ACPI_SB_SMBUS_ADDR, 0x22,
+                                   battery->info.device_chemistry);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_str() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_str() failed"));
                 goto end;
         }
 
@@ -567,103 +632,60 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
         return result;
 }
 
-static void acpi_update_delay(struct acpi_sbs *sbs)
-{
-        if (sbs->zombie) {
-                return;
-        }
-        if (sbs->update_time2 > 0) {
-                msleep(sbs->update_time2 * 1000);
-        }
-}
-
 static int acpi_battery_get_state(struct acpi_battery *battery)
 {
-        struct acpi_ec_smbus *smbus = battery->sbs->smbus;
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
 
-        acpi_update_delay(battery->sbs);
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x09,
-                                          &battery->state.voltage,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x09,
+                                    &battery->state.voltage);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        acpi_update_delay(battery->sbs);
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x0a,
-                                          &battery->state.amperage,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x0a,
+                                    &battery->state.amperage);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        acpi_update_delay(battery->sbs);
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x0f,
-                                          &battery->state.remaining_capacity,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x0f,
+                                    &battery->state.remaining_capacity);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        acpi_update_delay(battery->sbs);
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x12,
-                                          &battery->state.average_time_to_empty,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x16,
+                                    &battery->state.battery_state);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        acpi_update_delay(battery->sbs);
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x13,
-                                          &battery->state.average_time_to_full,
-                                          &acpi_battery_smbus_err_handler);
-        if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
-                goto end;
-        }
-
-        acpi_update_delay(battery->sbs);
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x16,
-                                          &battery->state.battery_status,
-                                          &acpi_battery_smbus_err_handler);
-        if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
-                goto end;
-        }
-
-        acpi_update_delay(battery->sbs);
-
       end:
         return result;
 }
 
 static int acpi_battery_get_alarm(struct acpi_battery *battery)
 {
-        struct acpi_ec_smbus *smbus = battery->sbs->smbus;
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x01,
-                                          &battery->alarm.remaining_capacity,
-                                          &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x01,
+                                    &battery->alarm.remaining_capacity);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        acpi_update_delay(battery->sbs);
-
       end:
 
         return result;
@@ -672,15 +694,15 @@ static int acpi_battery_get_alarm(struct acpi_battery *battery)
 static int acpi_battery_set_alarm(struct acpi_battery *battery,
                                   unsigned long alarm)
 {
-        struct acpi_ec_smbus *smbus = battery->sbs->smbus;
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
         s16 battery_mode;
         int foo;
 
         result = acpi_battery_select(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_select() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_select() failed"));
                 goto end;
         }
 
@@ -688,33 +710,29 @@ static int acpi_battery_set_alarm(struct acpi_battery *battery,
 
         if (alarm > 0) {
                 result =
-                    acpi_sbs_smbus_read_word(smbus, ACPI_SB_SMBUS_ADDR, 0x03,
-                                             &battery_mode,
-                                             &acpi_battery_smbus_err_handler);
+                    acpi_sbs_read_word(sbs, ACPI_SB_SMBUS_ADDR, 0x03,
+                                       &battery_mode);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_smbus_read_word() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_read_word() failed"));
                         goto end;
                 }
 
                 result =
-                    acpi_sbs_smbus_write_word(smbus, ACPI_SB_SMBUS_ADDR, 0x01,
-                                              battery_mode & 0xbfff,
-                                              &acpi_battery_smbus_err_handler);
+                    acpi_sbs_write_word(sbs, ACPI_SB_SMBUS_ADDR, 0x01,
+                                        battery_mode & 0xbfff);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_smbus_write_word() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_write_word() failed"));
                         goto end;
                 }
         }
 
         foo = alarm / (battery->info.capacity_mode ? 10 : 1);
-        result = acpi_sbs_smbus_write_word(smbus, ACPI_SB_SMBUS_ADDR, 0x01,
-                                           foo,
-                                           &acpi_battery_smbus_err_handler);
+        result = acpi_sbs_write_word(sbs, ACPI_SB_SMBUS_ADDR, 0x01, foo);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_write_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_write_word() failed"));
                 goto end;
         }
 
@@ -725,6 +743,7 @@ static int acpi_battery_set_alarm(struct acpi_battery *battery,
 
 static int acpi_battery_set_mode(struct acpi_battery *battery)
 {
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
         s16 battery_mode;
 
@@ -732,12 +751,11 @@ static int acpi_battery_set_mode(struct acpi_battery *battery)
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_word(battery->sbs->smbus,
-                                          ACPI_SB_SMBUS_ADDR, 0x03,
-                                          &battery_mode, NULL);
+        result = acpi_sbs_read_word(sbs,
+                                    ACPI_SB_SMBUS_ADDR, 0x03, &battery_mode);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
@@ -746,21 +764,19 @@ static int acpi_battery_set_mode(struct acpi_battery *battery)
         } else {
                 battery_mode |= 0x8000;
         }
-        result = acpi_sbs_smbus_write_word(battery->sbs->smbus,
-                                           ACPI_SB_SMBUS_ADDR, 0x03,
-                                           battery_mode, NULL);
+        result = acpi_sbs_write_word(sbs,
+                                     ACPI_SB_SMBUS_ADDR, 0x03, battery_mode);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_write_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_write_word() failed"));
                 goto end;
         }
 
-        result = acpi_sbs_smbus_read_word(battery->sbs->smbus,
-                                          ACPI_SB_SMBUS_ADDR, 0x03,
-                                          &battery_mode, NULL);
+        result = acpi_sbs_read_word(sbs,
+                                    ACPI_SB_SMBUS_ADDR, 0x03, &battery_mode);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
@@ -774,36 +790,36 @@ static int acpi_battery_init(struct acpi_battery *battery)
 
         result = acpi_battery_select(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_init() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_select() failed"));
                 goto end;
         }
 
         result = acpi_battery_set_mode(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_set_mode() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_set_mode() failed"));
                 goto end;
         }
 
         result = acpi_battery_get_info(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_get_info() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_get_info() failed"));
                 goto end;
         }
 
         result = acpi_battery_get_state(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_get_state() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_get_state() failed"));
                 goto end;
         }
 
         result = acpi_battery_get_alarm(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_get_alarm() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_get_alarm() failed"));
                 goto end;
         }
 
@@ -813,20 +829,19 @@ static int acpi_battery_init(struct acpi_battery *battery)
 
 static int acpi_ac_get_present(struct acpi_sbs *sbs)
 {
-        struct acpi_ec_smbus *smbus = sbs->smbus;
         int result = 0;
         s16 charger_status;
 
-        result = acpi_sbs_smbus_read_word(smbus, ACPI_SBC_SMBUS_ADDR, 0x13,
-                                          &charger_status, NULL);
+        result = acpi_sbs_read_word(sbs, ACPI_SBC_SMBUS_ADDR, 0x13,
+                                    &charger_status);
 
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_smbus_read_word() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_read_word() failed"));
                 goto end;
         }
 
-        sbs->ac_present = (charger_status & 0x8000) >> 15;
+        sbs->ac.ac_present = (charger_status & 0x8000) >> 15;
 
       end:
 
@@ -852,8 +867,8 @@ acpi_sbs_generic_add_fs(struct proc_dir_entry **dir,
         if (!*dir) {
                 *dir = proc_mkdir(dir_name, parent_dir);
                 if (!*dir) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "proc_mkdir() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "proc_mkdir() failed"));
                         return -ENODEV;
                 }
                 (*dir)->owner = THIS_MODULE;
@@ -863,8 +878,8 @@ acpi_sbs_generic_add_fs(struct proc_dir_entry **dir,
         if (info_fops) {
                 entry = create_proc_entry(ACPI_SBS_FILE_INFO, S_IRUGO, *dir);
                 if (!entry) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "create_proc_entry() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "create_proc_entry() failed"));
                 } else {
                         entry->proc_fops = info_fops;
                         entry->data = data;
@@ -876,8 +891,8 @@ acpi_sbs_generic_add_fs(struct proc_dir_entry **dir,
         if (state_fops) {
                 entry = create_proc_entry(ACPI_SBS_FILE_STATE, S_IRUGO, *dir);
                 if (!entry) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "create_proc_entry() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "create_proc_entry() failed"));
                 } else {
                         entry->proc_fops = state_fops;
                         entry->data = data;
@@ -889,8 +904,8 @@ acpi_sbs_generic_add_fs(struct proc_dir_entry **dir,
         if (alarm_fops) {
                 entry = create_proc_entry(ACPI_SBS_FILE_ALARM, S_IRUGO, *dir);
                 if (!entry) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "create_proc_entry() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "create_proc_entry() failed"));
                 } else {
                         entry->proc_fops = alarm_fops;
                         entry->data = data;
@@ -923,24 +938,27 @@ static struct proc_dir_entry *acpi_battery_dir = NULL;
 static int acpi_battery_read_info(struct seq_file *seq, void *offset)
 {
         struct acpi_battery *battery = seq->private;
+        struct acpi_sbs *sbs = battery->sbs;
         int cscale;
         int result = 0;
 
-        if (battery->sbs->zombie) {
+        if (sbs_mutex_lock(sbs)) {
                 return -ENODEV;
         }
 
-        down(&sbs_sem);
+        result = acpi_check_update_proc(sbs);
+        if (result)
+                goto end;
 
-        if (update_mode == REQUEST_UPDATE_MODE) {
-                result = acpi_sbs_update_run(battery->sbs, DATA_TYPE_INFO);
+        if (update_time == 0) {
+                result = acpi_sbs_update_run(sbs, battery->id, DATA_TYPE_INFO);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_update_run() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_update_run() failed"));
                 }
         }
 
-        if (acpi_battery_is_present(battery)) {
+        if (battery->battery_present) {
                 seq_printf(seq, "present:                 yes\n");
         } else {
                 seq_printf(seq, "present:                 no\n");
@@ -952,13 +970,13 @@ static int acpi_battery_read_info(struct seq_file *seq, void *offset)
         } else {
                 cscale = battery->info.ipscale;
         }
-        seq_printf(seq, "design capacity:         %i%s",
+        seq_printf(seq, "design capacity:         %i%s\n",
                    battery->info.design_capacity * cscale,
-                   battery->info.capacity_mode ? "0 mWh\n" : " mAh\n");
+                   battery->info.capacity_mode ? "0 mWh" : " mAh");
 
-        seq_printf(seq, "last full capacity:      %i%s",
+        seq_printf(seq, "last full capacity:      %i%s\n",
                    battery->info.full_charge_capacity * cscale,
-                   battery->info.capacity_mode ? "0 mWh\n" : " mAh\n");
+                   battery->info.capacity_mode ? "0 mWh" : " mAh");
 
         seq_printf(seq, "battery technology:      rechargeable\n");
 
@@ -984,7 +1002,7 @@ static int acpi_battery_read_info(struct seq_file *seq, void *offset)
 
       end:
 
-        up(&sbs_sem);
+        sbs_mutex_unlock(sbs);
 
         return result;
 }
@@ -996,26 +1014,29 @@ static int acpi_battery_info_open_fs(struct inode *inode, struct file *file)
 
 static int acpi_battery_read_state(struct seq_file *seq, void *offset)
 {
-        struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+        struct acpi_battery *battery = seq->private;
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
         int cscale;
         int foo;
 
-        if (battery->sbs->zombie) {
+        if (sbs_mutex_lock(sbs)) {
                 return -ENODEV;
         }
 
-        down(&sbs_sem);
+        result = acpi_check_update_proc(sbs);
+        if (result)
+                goto end;
 
-        if (update_mode == REQUEST_UPDATE_MODE) {
-                result = acpi_sbs_update_run(battery->sbs, DATA_TYPE_STATE);
+        if (update_time == 0) {
+                result = acpi_sbs_update_run(sbs, battery->id, DATA_TYPE_STATE);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_update_run() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_update_run() failed"));
                 }
         }
 
-        if (acpi_battery_is_present(battery)) {
+        if (battery->battery_present) {
                 seq_printf(seq, "present:                 yes\n");
         } else {
                 seq_printf(seq, "present:                 no\n");
@@ -1028,7 +1049,7 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset)
                 cscale = battery->info.ipscale;
         }
 
-        if (battery->state.battery_status & 0x0010) {
+        if (battery->state.battery_state & 0x0010) {
                 seq_printf(seq, "capacity state:          critical\n");
         } else {
                 seq_printf(seq, "capacity state:          ok\n");
@@ -1052,16 +1073,16 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset)
                            battery->info.capacity_mode ? "mW" : "mA");
         }
 
-        seq_printf(seq, "remaining capacity:      %i%s",
+        seq_printf(seq, "remaining capacity:      %i%s\n",
                    battery->state.remaining_capacity * cscale,
-                   battery->info.capacity_mode ? "0 mWh\n" : " mAh\n");
+                   battery->info.capacity_mode ? "0 mWh" : " mAh");
 
         seq_printf(seq, "present voltage:         %i mV\n",
                    battery->state.voltage * battery->info.vscale);
 
       end:
 
-        up(&sbs_sem);
+        sbs_mutex_unlock(sbs);
 
         return result;
 }
@@ -1074,24 +1095,27 @@ static int acpi_battery_state_open_fs(struct inode *inode, struct file *file)
 static int acpi_battery_read_alarm(struct seq_file *seq, void *offset)
 {
         struct acpi_battery *battery = seq->private;
+        struct acpi_sbs *sbs = battery->sbs;
         int result = 0;
         int cscale;
 
-        if (battery->sbs->zombie) {
+        if (sbs_mutex_lock(sbs)) {
                 return -ENODEV;
         }
 
-        down(&sbs_sem);
+        result = acpi_check_update_proc(sbs);
+        if (result)
+                goto end;
 
-        if (update_mode == REQUEST_UPDATE_MODE) {
-                result = acpi_sbs_update_run(battery->sbs, DATA_TYPE_ALARM);
+        if (update_time == 0) {
+                result = acpi_sbs_update_run(sbs, battery->id, DATA_TYPE_ALARM);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_update_run() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_update_run() failed"));
                 }
         }
 
-        if (!acpi_battery_is_present(battery)) {
+        if (!battery->battery_present) {
                 seq_printf(seq, "present:                 no\n");
                 goto end;
         }
@@ -1104,16 +1128,16 @@ static int acpi_battery_read_alarm(struct seq_file *seq, void *offset)
 
         seq_printf(seq, "alarm:                   ");
         if (battery->alarm.remaining_capacity) {
-                seq_printf(seq, "%i%s",
+                seq_printf(seq, "%i%s\n",
                            battery->alarm.remaining_capacity * cscale,
-                           battery->info.capacity_mode ? "0 mWh\n" : " mAh\n");
+                           battery->info.capacity_mode ? "0 mWh" : " mAh");
         } else {
                 seq_printf(seq, "disabled\n");
         }
 
       end:
 
-        up(&sbs_sem);
+        sbs_mutex_unlock(sbs);
 
         return result;
 }
@@ -1124,16 +1148,19 @@ acpi_battery_write_alarm(struct file *file, const char __user * buffer,
 {
         struct seq_file *seq = file->private_data;
         struct acpi_battery *battery = seq->private;
+        struct acpi_sbs *sbs = battery->sbs;
         char alarm_string[12] = { '\0' };
         int result, old_alarm, new_alarm;
 
-        if (battery->sbs->zombie) {
+        if (sbs_mutex_lock(sbs)) {
                 return -ENODEV;
         }
 
-        down(&sbs_sem);
+        result = acpi_check_update_proc(sbs);
+        if (result)
+                goto end;
 
-        if (!acpi_battery_is_present(battery)) {
+        if (!battery->battery_present) {
                 result = -ENODEV;
                 goto end;
         }
@@ -1155,21 +1182,21 @@ acpi_battery_write_alarm(struct file *file, const char __user * buffer,
 
         result = acpi_battery_set_alarm(battery, new_alarm);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_set_alarm() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_set_alarm() failed"));
                 acpi_battery_set_alarm(battery, old_alarm);
                 goto end;
         }
         result = acpi_battery_get_alarm(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_get_alarm() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_get_alarm() failed"));
                 acpi_battery_set_alarm(battery, old_alarm);
                 goto end;
         }
 
       end:
-        up(&sbs_sem);
+        sbs_mutex_unlock(sbs);
 
         if (result) {
                 return result;
@@ -1217,24 +1244,22 @@ static int acpi_ac_read_state(struct seq_file *seq, void *offset)
         struct acpi_sbs *sbs = seq->private;
         int result;
 
-        if (sbs->zombie) {
+        if (sbs_mutex_lock(sbs)) {
                 return -ENODEV;
         }
 
-        down(&sbs_sem);
-
-        if (update_mode == REQUEST_UPDATE_MODE) {
-                result = acpi_sbs_update_run(sbs, DATA_TYPE_AC_STATE);
+        if (update_time == 0) {
+                result = acpi_sbs_update_run(sbs, -1, DATA_TYPE_AC_STATE);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_update_run() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_update_run() failed"));
                 }
         }
 
         seq_printf(seq, "state:                   %s\n",
-                   sbs->ac_present ? "on-line" : "off-line");
+                   sbs->ac.ac_present ? "on-line" : "off-line");
 
-        up(&sbs_sem);
+        sbs_mutex_unlock(sbs);
 
         return 0;
 }
@@ -1275,25 +1300,25 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
 
         result = acpi_battery_select(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_select() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_select() failed"));
                 goto end;
         }
 
         result = acpi_battery_get_present(battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_battery_get_present() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_battery_get_present() failed"));
                 goto end;
         }
 
-        is_present = acpi_battery_is_present(battery);
+        is_present = battery->battery_present;
 
         if (is_present) {
                 result = acpi_battery_init(battery);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_battery_init() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_battery_init() failed"));
                         goto end;
                 }
                 battery->init_state = 1;
@@ -1308,12 +1333,16 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
                                          &acpi_battery_state_fops,
                                          &acpi_battery_alarm_fops, battery);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_generic_add_fs() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_generic_add_fs() failed"));
                 goto end;
         }
         battery->alive = 1;
 
+        printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
+               ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device), dir_name,
+               sbs->battery->battery_present ? "present" : "absent");
+
       end:
         return result;
 }
@@ -1333,8 +1362,8 @@ static int acpi_ac_add(struct acpi_sbs *sbs)
 
         result = acpi_ac_get_present(sbs);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_ac_get_present() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_ac_get_present() failed"));
                 goto end;
         }
 
@@ -1343,11 +1372,15 @@ static int acpi_ac_add(struct acpi_sbs *sbs)
                                          ACPI_AC_DIR_NAME,
                                          NULL, &acpi_ac_state_fops, NULL, sbs);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_generic_add_fs() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_generic_add_fs() failed"));
                 goto end;
         }
 
+        printk(KERN_INFO PREFIX "%s [%s]: AC Adapter [%s] (%s)\n",
+               ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
+               ACPI_AC_DIR_NAME, sbs->ac.ac_present ? "on-line" : "off-line");
+
       end:
 
         return result;
@@ -1361,45 +1394,85 @@ static void acpi_ac_remove(struct acpi_sbs *sbs)
         }
 }
 
-static void acpi_sbs_update_queue_run(unsigned long data)
+static void acpi_sbs_update_time_run(unsigned long data)
 {
-        acpi_os_execute(OSL_GPE_HANDLER, acpi_sbs_update_queue, (void *)data);
+        acpi_os_execute(OSL_GPE_HANDLER, acpi_sbs_update_time, (void *)data);
 }
 
-static int acpi_sbs_update_run(struct acpi_sbs *sbs, int data_type)
+static int acpi_sbs_update_run(struct acpi_sbs *sbs, int id, int data_type)
 {
         struct acpi_battery *battery;
-        int result = 0;
-        int old_ac_present;
-        int old_battery_present;
-        int new_ac_present;
-        int new_battery_present;
-        int id;
+        int result = 0, cnt;
+        int old_ac_present = -1;
+        int old_battery_present = -1;
+        int new_ac_present = -1;
+        int new_battery_present = -1;
+        int id_min = 0, id_max = MAX_SBS_BAT - 1;
         char dir_name[32];
-        int do_battery_init, do_ac_init;
-        s16 old_remaining_capacity;
+        int do_battery_init = 0, do_ac_init = 0;
+        int old_remaining_capacity = 0;
+        int update_ac = 1, update_battery = 1;
+        int up_tm = update_time;
 
-        if (sbs->zombie) {
+        if (sbs_zombie(sbs)) {
                 goto end;
         }
 
-        old_ac_present = acpi_ac_is_present(sbs);
+        if (id >= 0) {
+                id_min = id_max = id;
+        }
+
+        if (data_type == DATA_TYPE_COMMON && up_tm > 0) {
+                cnt = up_tm / (up_tm > UPDATE_DELAY ? UPDATE_DELAY : up_tm);
+                if (sbs->run_cnt % cnt != 0) {
+                        update_battery = 0;
+                }
+        }
+
+        sbs->run_cnt++;
+
+        if (!update_ac && !update_battery) {
+                goto end;
+        }
+
+        old_ac_present = sbs->ac.ac_present;
 
         result = acpi_ac_get_present(sbs);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_ac_get_present() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_ac_get_present() failed"));
         }
 
-        new_ac_present = acpi_ac_is_present(sbs);
+        new_ac_present = sbs->ac.ac_present;
 
         do_ac_init = (old_ac_present != new_ac_present);
+        if (sbs->run_cnt == 1 && data_type == DATA_TYPE_COMMON) {
+                do_ac_init = 1;
+        }
 
-        if (data_type == DATA_TYPE_AC_STATE) {
+        if (do_ac_init) {
+                result = acpi_sbs_generate_event(sbs->device,
+                                                 ACPI_SBS_AC_NOTIFY_STATUS,
+                                                 new_ac_present,
+                                                 ACPI_AC_DIR_NAME,
+                                                 ACPI_AC_CLASS);
+                if (result) {
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_generate_event() failed"));
+                }
+        }
+
+        if (data_type == DATA_TYPE_COMMON) {
+                if (!do_ac_init && !update_battery) {
+                        goto end;
+                }
+        }
+
+        if (data_type == DATA_TYPE_AC_STATE && !do_ac_init) {
                 goto end;
         }
 
-        for (id = 0; id < MAX_SBS_BAT; id++) {
+        for (id = id_min; id <= id_max; id++) {
                 battery = &sbs->battery[id];
                 if (battery->alive == 0) {
                         continue;
@@ -1407,94 +1480,92 @@ static int acpi_sbs_update_run(struct acpi_sbs *sbs, int data_type)
 
                 old_remaining_capacity = battery->state.remaining_capacity;
 
-                old_battery_present = acpi_battery_is_present(battery);
+                old_battery_present = battery->battery_present;
 
                 result = acpi_battery_select(battery);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_battery_select() failed\n"));
-                }
-                if (sbs->zombie) {
-                        goto end;
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_battery_select() failed"));
                 }
 
                 result = acpi_battery_get_present(battery);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_battery_get_present() failed\n"));
-                }
-                if (sbs->zombie) {
-                        goto end;
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_battery_get_present() failed"));
                 }
 
-                new_battery_present = acpi_battery_is_present(battery);
+                new_battery_present = battery->battery_present;
 
                 do_battery_init = ((old_battery_present != new_battery_present)
                                    && new_battery_present);
-
-                if (sbs->zombie) {
+                if (!new_battery_present)
+                        goto event;
+                if (do_ac_init || do_battery_init) {
+                        result = acpi_battery_init(battery);
+                        if (result) {
+                                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                                "acpi_battery_init() "
+                                                "failed"));
+                        }
+                }
+                if (sbs_zombie(sbs)) {
                         goto end;
                 }
-                if (do_ac_init || do_battery_init ||
-                    update_info_mode || sbs->update_info_mode) {
-                        if (sbs->update_info_mode) {
-                                sbs->update_info_mode = 0;
-                        } else {
-                                sbs->update_info_mode = 1;
-                        }
-                        result = acpi_battery_init(battery);
+
+                if ((data_type == DATA_TYPE_COMMON
+                     || data_type == DATA_TYPE_INFO)
+                    && new_battery_present) {
+                        result = acpi_battery_get_info(battery);
                         if (result) {
-                                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                                  "acpi_battery_init() "
-                                                  "failed\n"));
+                                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                                "acpi_battery_get_info() failed"));
                         }
                 }
                 if (data_type == DATA_TYPE_INFO) {
                         continue;
                 }
-
-                if (sbs->zombie) {
+                if (sbs_zombie(sbs)) {
                         goto end;
                 }
-                if (new_battery_present) {
-                        result = acpi_battery_get_alarm(battery);
-                        if (result) {
-                                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                                  "acpi_battery_get_alarm() "
-                                                  "failed\n"));
-                        }
-                        if (data_type == DATA_TYPE_ALARM) {
-                                continue;
-                        }
 
+                if ((data_type == DATA_TYPE_COMMON
+                     || data_type == DATA_TYPE_STATE)
+                    && new_battery_present) {
                         result = acpi_battery_get_state(battery);
                         if (result) {
-                                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                                  "acpi_battery_get_state() "
-                                                  "failed\n"));
+                                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                                "acpi_battery_get_state() failed"));
                         }
                 }
-                if (sbs->zombie) {
-                        goto end;
+                if (data_type == DATA_TYPE_STATE) {
+                        goto event;
                 }
-                if (data_type != DATA_TYPE_COMMON) {
-                        continue;
+                if (sbs_zombie(sbs)) {
+                        goto end;
                 }
 
-                if (old_battery_present != new_battery_present) {
-                        sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
-                        result = acpi_sbs_generate_event(sbs->device,
-                                                         ACPI_SBS_BATTERY_NOTIFY_STATUS,
-                                                         new_battery_present,
-                                                         dir_name,
-                                                         ACPI_BATTERY_CLASS);
+                if ((data_type == DATA_TYPE_COMMON
+                     || data_type == DATA_TYPE_ALARM)
+                    && new_battery_present) {
+                        result = acpi_battery_get_alarm(battery);
                         if (result) {
-                                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                                  "acpi_sbs_generate_event() "
-                                                  "failed\n"));
+                                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                                "acpi_battery_get_alarm() "
+                                                "failed"));
                         }
                 }
-                if (old_remaining_capacity != battery->state.remaining_capacity) {
+                if (data_type == DATA_TYPE_ALARM) {
+                        continue;
+                }
+                if (sbs_zombie(sbs)) {
+                        goto end;
+                }
+
+              event:
+
+                if (old_battery_present != new_battery_present || do_ac_init ||
+                    old_remaining_capacity !=
+                    battery->state.remaining_capacity) {
                         sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
                         result = acpi_sbs_generate_event(sbs->device,
                                                          ACPI_SBS_BATTERY_NOTIFY_STATUS,
@@ -1502,138 +1573,120 @@ static int acpi_sbs_update_run(struct acpi_sbs *sbs, int data_type)
                                                          dir_name,
                                                          ACPI_BATTERY_CLASS);
                         if (result) {
-                                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                                  "acpi_sbs_generate_event() failed\n"));
+                                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                                "acpi_sbs_generate_event() "
+                                                "failed"));
                         }
                 }
-
-        }
-        if (sbs->zombie) {
-                goto end;
-        }
-        if (data_type != DATA_TYPE_COMMON) {
-                goto end;
-        }
-
-        if (old_ac_present != new_ac_present) {
-                result = acpi_sbs_generate_event(sbs->device,
-                                                 ACPI_SBS_AC_NOTIFY_STATUS,
-                                                 new_ac_present,
-                                                 ACPI_AC_DIR_NAME,
-                                                 ACPI_AC_CLASS);
-                if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_generate_event() failed\n"));
-                }
         }
 
       end:
+
         return result;
 }
 
-static void acpi_sbs_update_queue(void *data)
+static void acpi_sbs_update_time(void *data)
 {
         struct acpi_sbs *sbs = data;
         unsigned long delay = -1;
         int result;
+        unsigned int up_tm = update_time;
 
-        if (sbs->zombie) {
-                goto end;
-        }
+        if (sbs_mutex_lock(sbs))
+                return;
 
-        result = acpi_sbs_update_run(sbs, DATA_TYPE_COMMON);
+        result = acpi_sbs_update_run(sbs, -1, DATA_TYPE_COMMON);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_sbs_update_run() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_sbs_update_run() failed"));
         }
 
-        if (sbs->zombie) {
+        if (sbs_zombie(sbs)) {
                 goto end;
         }
 
-        if (update_mode == REQUEST_UPDATE_MODE) {
-                goto end;
+        if (!up_tm) {
+                if (timer_pending(&sbs->update_timer))
+                        del_timer(&sbs->update_timer);
+        } else {
+                delay = (up_tm > UPDATE_DELAY ? UPDATE_DELAY : up_tm);
+                delay = jiffies + HZ * delay;
+                if (timer_pending(&sbs->update_timer)) {
+                        mod_timer(&sbs->update_timer, delay);
+                } else {
+                        sbs->update_timer.data = (unsigned long)data;
+                        sbs->update_timer.function = acpi_sbs_update_time_run;
+                        sbs->update_timer.expires = delay;
+                        add_timer(&sbs->update_timer);
+                }
         }
 
-        delay = jiffies + HZ * update_time;
-        sbs->update_timer.data = (unsigned long)data;
-        sbs->update_timer.function = acpi_sbs_update_queue_run;
-        sbs->update_timer.expires = delay;
-        add_timer(&sbs->update_timer);
       end:
-        ;
+
+        sbs_mutex_unlock(sbs);
 }
 
 static int acpi_sbs_add(struct acpi_device *device)
 {
         struct acpi_sbs *sbs = NULL;
-        struct acpi_ec_hc *ec_hc = NULL;
-        int result, remove_result = 0;
+        int result = 0, remove_result = 0;
         unsigned long sbs_obj;
-        int id, cnt;
+        int id;
         acpi_status status = AE_OK;
+        unsigned long val;
+
+        status =
+            acpi_evaluate_integer(device->parent->handle, "_EC", NULL, &val);
+        if (ACPI_FAILURE(status)) {
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Error obtaining _EC"));
+                return -EIO;
+        }
 
         sbs = kzalloc(sizeof(struct acpi_sbs), GFP_KERNEL);
         if (!sbs) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "kmalloc() failed\n"));
-                return -ENOMEM;
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR, "kzalloc() failed"));
+                result = -ENOMEM;
+                goto end;
         }
 
-        cnt = 0;
-        while (cnt < 10) {
-                cnt++;
-                ec_hc = acpi_get_ec_hc(device);
-                if (ec_hc) {
-                        break;
-                }
-                msleep(1000);
-        }
+        mutex_init(&sbs->mutex);
 
-        if (!ec_hc) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_get_ec_hc() failed: "
-                                  "NO driver found for EC HC SMBus\n"));
-                result = -ENODEV;
-                goto end;
-        }
+        sbs_mutex_lock(sbs);
 
+        sbs->base = (val & 0xff00ull) >> 8;
         sbs->device = device;
-        sbs->smbus = ec_hc->smbus;
 
         strcpy(acpi_device_name(device), ACPI_SBS_DEVICE_NAME);
         strcpy(acpi_device_class(device), ACPI_SBS_CLASS);
         acpi_driver_data(device) = sbs;
 
-        sbs->update_time = 0;
-        sbs->update_time2 = 0;
-
         result = acpi_ac_add(sbs);
         if (result) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "acpi_ac_add() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR, "acpi_ac_add() failed"));
                 goto end;
         }
-        result = acpi_evaluate_integer(device->handle, "_SBS", NULL, &sbs_obj);
-        if (ACPI_FAILURE(result)) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_evaluate_integer() failed\n"));
+        status = acpi_evaluate_integer(device->handle, "_SBS", NULL, &sbs_obj);
+        if (status) {
+                ACPI_EXCEPTION((AE_INFO, status,
+                                "acpi_evaluate_integer() failed"));
                 result = -EIO;
                 goto end;
         }
-
         if (sbs_obj > 0) {
                 result = acpi_sbsm_get_info(sbs);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbsm_get_info() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbsm_get_info() failed"));
                         goto end;
                 }
                 sbs->sbsm_present = 1;
         }
+
         if (sbs->sbsm_present == 0) {
                 result = acpi_battery_add(sbs, 0);
                 if (result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_battery_add() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_battery_add() failed"));
                         goto end;
                 }
         } else {
@@ -1641,9 +1694,8 @@ static int acpi_sbs_add(struct acpi_device *device)
                         if ((sbs->sbsm_batteries_supported & (1 << id))) {
                                 result = acpi_battery_add(sbs, id);
                                 if (result) {
-                                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                                          "acpi_battery_add() "
-                                                          "failed\n"));
+                                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                                        "acpi_battery_add() failed"));
                                         goto end;
                                 }
                         }
@@ -1653,33 +1705,26 @@ static int acpi_sbs_add(struct acpi_device *device)
         sbs->handle = device->handle;
 
         init_timer(&sbs->update_timer);
-        if (update_mode == QUEUE_UPDATE_MODE) {
-                status = acpi_os_execute(OSL_GPE_HANDLER,
-                                         acpi_sbs_update_queue, sbs);
-                if (status != AE_OK) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_os_execute() failed\n"));
-                }
-        }
-        sbs->update_time = update_time;
-        sbs->update_time2 = update_time2;
-
-        printk(KERN_INFO PREFIX "%s [%s]\n",
-               acpi_device_name(device), acpi_device_bid(device));
+        result = acpi_check_update_proc(sbs);
+        if (result)
+                goto end;
 
       end:
+
+        sbs_mutex_unlock(sbs);
+
         if (result) {
                 remove_result = acpi_sbs_remove(device, 0);
                 if (remove_result) {
-                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                          "acpi_sbs_remove() failed\n"));
+                        ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                        "acpi_sbs_remove() failed"));
                 }
         }
 
         return result;
 }
 
-int acpi_sbs_remove(struct acpi_device *device, int type)
+static int acpi_sbs_remove(struct acpi_device *device, int type)
 {
         struct acpi_sbs *sbs;
         int id;
@@ -1688,15 +1733,14 @@ int acpi_sbs_remove(struct acpi_device *device, int type)
                 return -EINVAL;
         }
 
-        sbs = (struct acpi_sbs *)acpi_driver_data(device);
-
+        sbs = acpi_driver_data(device);
         if (!sbs) {
                 return -EINVAL;
         }
 
+        sbs_mutex_lock(sbs);
+
         sbs->zombie = 1;
-        sbs->update_time = 0;
-        sbs->update_time2 = 0;
         del_timer_sync(&sbs->update_timer);
         acpi_os_wait_events_complete(NULL);
         del_timer_sync(&sbs->update_timer);
@@ -1707,11 +1751,41 @@ int acpi_sbs_remove(struct acpi_device *device, int type)
 
         acpi_ac_remove(sbs);
 
+        sbs_mutex_unlock(sbs);
+
+        mutex_destroy(&sbs->mutex);
+
         kfree(sbs);
 
         return 0;
 }
 
+static void acpi_sbs_rmdirs(void)
+{
+        if (acpi_ac_dir) {
+                acpi_unlock_ac_dir(acpi_ac_dir);
+                acpi_ac_dir = NULL;
+        }
+        if (acpi_battery_dir) {
+                acpi_unlock_battery_dir(acpi_battery_dir);
+                acpi_battery_dir = NULL;
+        }
+}
+
+static int acpi_sbs_resume(struct acpi_device *device)
+{
+        struct acpi_sbs *sbs;
+
+        if (!device)
+                return -EINVAL;
+
+        sbs = device->driver_data;
+
+        sbs->run_cnt = 0;
+
+        return 0;
+}
+
 static int __init acpi_sbs_init(void)
 {
         int result = 0;
@@ -1719,35 +1793,34 @@ static int __init acpi_sbs_init(void)
         if (acpi_disabled)
                 return -ENODEV;
 
-        init_MUTEX(&sbs_sem);
-
         if (capacity_mode != DEF_CAPACITY_UNIT
             && capacity_mode != MAH_CAPACITY_UNIT
             && capacity_mode != MWH_CAPACITY_UNIT) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "acpi_sbs_init: "
-                                  "invalid capacity_mode = %d\n",
-                                  capacity_mode));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "invalid capacity_mode = %d", capacity_mode));
                 return -EINVAL;
         }
 
         acpi_ac_dir = acpi_lock_ac_dir();
         if (!acpi_ac_dir) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_lock_ac_dir() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_lock_ac_dir() failed"));
                 return -ENODEV;
         }
 
         acpi_battery_dir = acpi_lock_battery_dir();
         if (!acpi_battery_dir) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_lock_battery_dir() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_lock_battery_dir() failed"));
+                acpi_sbs_rmdirs();
                 return -ENODEV;
         }
 
         result = acpi_bus_register_driver(&acpi_sbs_driver);
         if (result < 0) {
-                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
-                                  "acpi_bus_register_driver() failed\n"));
+                ACPI_EXCEPTION((AE_INFO, AE_ERROR,
+                                "acpi_bus_register_driver() failed"));
+                acpi_sbs_rmdirs();
                 return -ENODEV;
         }
 
@@ -1756,13 +1829,9 @@ static int __init acpi_sbs_init(void)
 
 static void __exit acpi_sbs_exit(void)
 {
-
         acpi_bus_unregister_driver(&acpi_sbs_driver);
 
-        acpi_unlock_ac_dir(acpi_ac_dir);
-        acpi_ac_dir = NULL;
-        acpi_unlock_battery_dir(acpi_battery_dir);
-        acpi_battery_dir = NULL;
+        acpi_sbs_rmdirs();
 
         return;
 }
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index bb0e0da39fb1..d80dd84e5bfd 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1068,7 +1068,9 @@ acpi_add_single_object(struct acpi_device **child,
                 }
                 break;
         default:
-                STRUCT_TO_INT(device->status) = 0x0F;
+                STRUCT_TO_INT(device->status) =
+                    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+                    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
                 break;
         }
 
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index ccc11b33d89c..2d912b71e543 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -350,21 +350,31 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
 {
         struct list_head *node, *next;
 
-        seq_printf(seq, "Device Sleep state     Status\n");
+        seq_printf(seq, "Device\tS-state\t  Status   Sysfs node\n");
 
         spin_lock(&acpi_device_lock);
         list_for_each_safe(node, next, &acpi_wakeup_device_list) {
                 struct acpi_device *dev =
                     container_of(node, struct acpi_device, wakeup_list);
+                struct device *ldev;
 
                 if (!dev->wakeup.flags.valid)
                         continue;
                 spin_unlock(&acpi_device_lock);
-                seq_printf(seq, "%4s    %4d             %s%8s\n",
+
+                ldev = acpi_get_physical_device(dev->handle);
+                seq_printf(seq, "%s\t  S%d\t%c%-8s  ",
                            dev->pnp.bus_id,
                            (u32) dev->wakeup.sleep_state,
-                           dev->wakeup.flags.run_wake ? "*" : "",
+                           dev->wakeup.flags.run_wake ? '*' : ' ',
                            dev->wakeup.state.enabled ? "enabled" : "disabled");
+                if (ldev)
+                        seq_printf(seq, "%s:%s",
+                                ldev->bus ? ldev->bus->name : "no-bus",
+                                ldev->bus_id);
+                seq_printf(seq, "\n");
+                put_device(ldev);
+
                 spin_lock(&acpi_device_lock);
         }
         spin_unlock(&acpi_device_lock);
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 78237577b05a..3ef593a9015f 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1,6 +1,8 @@
 /*
  * Sony Programmable I/O Control Device driver for VAIO
  *
+ * Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
+ *
  * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
  *
  * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
@@ -95,6 +97,11 @@ module_param(useinput, int, 0444);
 MODULE_PARM_DESC(useinput,
                  "set this if you would like sonypi to feed events to the input subsystem");
 
+static int check_ioport = 1;
+module_param(check_ioport, int, 0444);
+MODULE_PARM_DESC(check_ioport,
+                 "set this to 0 if you think the automatic ioport check for sony-laptop is wrong");
+
 #define SONYPI_DEVICE_MODEL_TYPE1       1
 #define SONYPI_DEVICE_MODEL_TYPE2       2
 #define SONYPI_DEVICE_MODEL_TYPE3       3
@@ -477,7 +484,7 @@ static struct sonypi_device {
         u16 evtype_offset;
         int camera_power;
         int bluetooth_power;
-        struct semaphore lock;
+        struct mutex lock;
         struct kfifo *fifo;
         spinlock_t fifo_lock;
         wait_queue_head_t fifo_proc_list;
@@ -884,7 +891,7 @@ int sonypi_camera_command(int command, u8 value)
         if (!camera)
                 return -EIO;
 
-        down(&sonypi_device.lock);
+        mutex_lock(&sonypi_device.lock);
 
         switch (command) {
         case SONYPI_COMMAND_SETCAMERA:
@@ -919,7 +926,7 @@ int sonypi_camera_command(int command, u8 value)
                        command);
                 break;
         }
-        up(&sonypi_device.lock);
+        mutex_unlock(&sonypi_device.lock);
         return 0;
 }
 
@@ -938,20 +945,20 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on)
 static int sonypi_misc_release(struct inode *inode, struct file *file)
 {
         sonypi_misc_fasync(-1, file, 0);
-        down(&sonypi_device.lock);
+        mutex_lock(&sonypi_device.lock);
         sonypi_device.open_count--;
-        up(&sonypi_device.lock);
+        mutex_unlock(&sonypi_device.lock);
         return 0;
 }
 
 static int sonypi_misc_open(struct inode *inode, struct file *file)
 {
-        down(&sonypi_device.lock);
+        mutex_lock(&sonypi_device.lock);
         /* Flush input queue on first open */
         if (!sonypi_device.open_count)
                 kfifo_reset(sonypi_device.fifo);
         sonypi_device.open_count++;
-        up(&sonypi_device.lock);
+        mutex_unlock(&sonypi_device.lock);
         return 0;
 }
 
@@ -1001,7 +1008,7 @@ static int sonypi_misc_ioctl(struct inode *ip, struct file *fp,
         u8 val8;
         u16 val16;
 
-        down(&sonypi_device.lock);
+        mutex_lock(&sonypi_device.lock);
         switch (cmd) {
         case SONYPI_IOCGBRT:
                 if (sonypi_ec_read(SONYPI_LCD_LIGHT, &val8)) {
@@ -1101,7 +1108,7 @@ static int sonypi_misc_ioctl(struct inode *ip, struct file *fp,
         default:
                 ret = -EINVAL;
         }
-        up(&sonypi_device.lock);
+        mutex_unlock(&sonypi_device.lock);
         return ret;
 }
 
@@ -1260,6 +1267,28 @@ static int __devinit sonypi_create_input_devices(void)
 static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,
                                 const struct sonypi_ioport_list *ioport_list)
 {
+        /* try to detect if sony-laptop is being used and thus
+         * has already requested one of the known ioports.
+         * As in the deprecated check_region this is racy has we have
+         * multiple ioports available and one of them can be requested
+         * between this check and the subsequent request. Anyway, as an
+         * attempt to be some more user-friendly as we currently are,
+         * this is enough.
+         */
+        const struct sonypi_ioport_list *check = ioport_list;
+        while (check_ioport && check->port1) {
+                if (!request_region(check->port1,
+                                   sonypi_device.region_size,
+                                   "Sony Programable I/O Device Check")) {
+                        printk(KERN_ERR "sonypi: ioport 0x%.4x busy, using sony-laptop? "
+                                        "if not use check_ioport=0\n",
+                                        check->port1);
+                        return -EBUSY;
+                }
+                release_region(check->port1, sonypi_device.region_size);
+                check++;
+        }
+
         while (ioport_list->port1) {
 
                 if (request_region(ioport_list->port1,
@@ -1321,6 +1350,10 @@ static int __devinit sonypi_probe(struct platform_device *dev)
         struct pci_dev *pcidev;
         int error;
 
+        printk(KERN_WARNING "sonypi: please try the sony-laptop module instead "
+                        "and report failures, see also "
+                        "http://www.linux.it/~malattia/wiki/index.php/Sony_drivers\n");
+
         spin_lock_init(&sonypi_device.fifo_lock);
         sonypi_device.fifo = kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL,
                                          &sonypi_device.fifo_lock);
@@ -1330,7 +1363,7 @@ static int __devinit sonypi_probe(struct platform_device *dev)
         }
 
         init_waitqueue_head(&sonypi_device.fifo_proc_list);
-        init_MUTEX(&sonypi_device.lock);
+        mutex_init(&sonypi_device.lock);
         sonypi_device.bluetooth_power = -1;
 
         if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 5ac309ee7f05..5cfcff532545 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -26,7 +26,7 @@
 /*
  * The I/O port the PMTMR resides at.
  * The location is detected during setup_arch(),
- * in arch/i386/acpi/boot.c
+ * in arch/i386/kernel/acpi/boot.c
  */
 u32 pmtmr_ioport __read_mostly;
 
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 7a6105153f23..ff6aefde10df 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -577,14 +577,14 @@ config VIDEO_ZORAN_AVS6EYES
 
 config VIDEO_MEYE
         tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
-        depends on PCI && SONYPI && VIDEO_V4L1
+        depends on PCI && SONY_LAPTOP && VIDEO_V4L1
         ---help---
           This is the video4linux driver for the Motion Eye camera found
           in the Vaio Picturebook laptops. Please read the material in
           <file:Documentation/video4linux/meye.txt> for more information.
 
-          If you say Y or M here, you need to say Y or M to "Sony Programmable
-          I/O Control Device" in the character device section.
+          If you say Y or M here, you need to say Y or M to "Sony Laptop
+          Extras" in the misc device section.
 
           To compile this driver as a module, choose M here: the
           module will be called meye.
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 98681da5e3b9..664aba8b4d85 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -925,13 +925,13 @@ static int meye_do_ioctl(struct inode *inode, struct file *file,
                 if (p->palette != VIDEO_PALETTE_YUV422 && p->palette != VIDEO_PALETTE_YUYV)
                         return -EINVAL;
                 mutex_lock(&meye.lock);
-                sonypi_camera_command(SONYPI_COMMAND_SETCAMERABRIGHTNESS,
+                sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERABRIGHTNESS,
                                       p->brightness >> 10);
-                sonypi_camera_command(SONYPI_COMMAND_SETCAMERAHUE,
+                sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAHUE,
                                       p->hue >> 10);
-                sonypi_camera_command(SONYPI_COMMAND_SETCAMERACOLOR,
+                sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACOLOR,
                                       p->colour >> 10);
-                sonypi_camera_command(SONYPI_COMMAND_SETCAMERACONTRAST,
+                sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACONTRAST,
                                       p->contrast >> 10);
                 meye.picture = *p;
                 mutex_unlock(&meye.lock);
@@ -1043,11 +1043,11 @@ static int meye_do_ioctl(struct inode *inode, struct file *file,
                     meye.params.quality != jp->quality)
                         mchip_hic_stop();       /* need restart */
                 meye.params = *jp;
-                sonypi_camera_command(SONYPI_COMMAND_SETCAMERASHARPNESS,
+                sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS,
                                       meye.params.sharpness);
-                sonypi_camera_command(SONYPI_COMMAND_SETCAMERAAGC,
+                sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC,
                                       meye.params.agc);
-                sonypi_camera_command(SONYPI_COMMAND_SETCAMERAPICTURE,
+                sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE,
                                       meye.params.picture);
                 mutex_unlock(&meye.lock);
                 break;
@@ -1287,38 +1287,38 @@ static int meye_do_ioctl(struct inode *inode, struct file *file,
                 mutex_lock(&meye.lock);
                 switch (c->id) {
                 case V4L2_CID_BRIGHTNESS:
-                        sonypi_camera_command(
-                                SONYPI_COMMAND_SETCAMERABRIGHTNESS, c->value);
+                        sony_pic_camera_command(
+                                SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, c->value);
                         meye.picture.brightness = c->value << 10;
                         break;
                 case V4L2_CID_HUE:
-                        sonypi_camera_command(
-                                SONYPI_COMMAND_SETCAMERAHUE, c->value);
+                        sony_pic_camera_command(
+                                SONY_PIC_COMMAND_SETCAMERAHUE, c->value);
                         meye.picture.hue = c->value << 10;
                         break;
                 case V4L2_CID_CONTRAST:
-                        sonypi_camera_command(
-                                SONYPI_COMMAND_SETCAMERACONTRAST, c->value);
+                        sony_pic_camera_command(
+                                SONY_PIC_COMMAND_SETCAMERACONTRAST, c->value);
                         meye.picture.contrast = c->value << 10;
                         break;
                 case V4L2_CID_SATURATION:
-                        sonypi_camera_command(
-                                SONYPI_COMMAND_SETCAMERACOLOR, c->value);
+                        sony_pic_camera_command(
+                                SONY_PIC_COMMAND_SETCAMERACOLOR, c->value);
                         meye.picture.colour = c->value << 10;
                         break;
                 case V4L2_CID_AGC:
-                        sonypi_camera_command(
-                                SONYPI_COMMAND_SETCAMERAAGC, c->value);
+                        sony_pic_camera_command(
+                                SONY_PIC_COMMAND_SETCAMERAAGC, c->value);
                         meye.params.agc = c->value;
                         break;
                 case V4L2_CID_SHARPNESS:
-                        sonypi_camera_command(
-                                SONYPI_COMMAND_SETCAMERASHARPNESS, c->value);
+                        sony_pic_camera_command(
+                                SONY_PIC_COMMAND_SETCAMERASHARPNESS, c->value);
                         meye.params.sharpness = c->value;
                         break;
                 case V4L2_CID_PICTURE:
-                        sonypi_camera_command(
-                                SONYPI_COMMAND_SETCAMERAPICTURE, c->value);
+                        sony_pic_camera_command(
+                                SONY_PIC_COMMAND_SETCAMERAPICTURE, c->value);
                         meye.params.picture = c->value;
                         break;
                 case V4L2_CID_JPEGQUAL:
@@ -1848,7 +1848,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
         memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
         meye.video_dev->dev = &meye.mchip_dev->dev;
 
-        if ((ret = sonypi_camera_command(SONYPI_COMMAND_SETCAMERA, 1))) {
+        if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
                 printk(KERN_ERR "meye: unable to power on the camera\n");
                 printk(KERN_ERR "meye: did you enable the camera in "
                                 "sonypi using the module options ?\n");
@@ -1928,13 +1928,13 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
         meye.params.picture = 0;
         meye.params.framerate = 0;
 
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERABRIGHTNESS, 32);
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERAHUE, 32);
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERACOLOR, 32);
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERACONTRAST, 32);
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERASHARPNESS, 32);
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERAPICTURE, 0);
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERAAGC, 48);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, 32);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAHUE, 32);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACOLOR, 32);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACONTRAST, 32);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS, 32);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48);
 
         printk(KERN_INFO "meye: Motion Eye Camera Driver v%s.\n",
                MEYE_DRIVER_VERSION);
@@ -1953,7 +1953,7 @@ outremap:
 outregions:
         pci_disable_device(meye.mchip_dev);
 outenabledev:
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERA, 0);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0);
 outsonypienable:
         kfifo_free(meye.doneq);
 outkfifoalloc2:
@@ -1986,7 +1986,7 @@ static void __devexit meye_remove(struct pci_dev *pcidev)
 
         pci_disable_device(meye.mchip_dev);
 
-        sonypi_camera_command(SONYPI_COMMAND_SETCAMERA, 0);
+        sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0);
 
         kfifo_free(meye.doneq);
         kfifo_free(meye.grabq);
diff --git a/drivers/media/video/meye.h b/drivers/media/video/meye.h
index ea107cb5c845..323d0074120d 100644
--- a/drivers/media/video/meye.h
+++ b/drivers/media/video/meye.h
@@ -255,7 +255,7 @@
 /****************************************************************************/
 
 /* Sony Programmable I/O Controller for accessing the camera commands */
-#include <linux/sonypi.h>
+#include <linux/sony-laptop.h>
 
 /* private API definitions */
 #include <linux/meye.h>
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 80b199fa0aa9..a3c525b2616a 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -112,14 +112,70 @@ config SONY_LAPTOP
         depends on X86 && ACPI
         select BACKLIGHT_CLASS_DEVICE
           ---help---
-          This mini-driver drives the SNC device present in the ACPI BIOS of
-          the Sony Vaio laptops.
+          This mini-driver drives the SNC and SPIC devices present in the ACPI
+          BIOS of the Sony Vaio laptops.
 
-          It gives access to some extra laptop functionalities. In its current
-          form, this driver let the user set or query the screen brightness
-          through the backlight subsystem and remove/apply power to some
+          It gives access to some extra laptop functionalities like Bluetooth,
+          screen brightness control, Fn keys and allows powering on/off some
           devices.
 
           Read <file:Documentation/sony-laptop.txt> for more information.
 
+config SONY_LAPTOP_OLD
+        bool "Sonypi compatibility"
+        depends on SONY_LAPTOP
+          ---help---
+          Build the sonypi driver compatibility code into the sony-laptop driver.
+
+config THINKPAD_ACPI
+        tristate "ThinkPad ACPI Laptop Extras"
+        depends on X86 && ACPI
+        select BACKLIGHT_CLASS_DEVICE
+        select HWMON
+        ---help---
+          This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
+          support for Fn-Fx key combinations, Bluetooth control, video
+          output switching, ThinkLight control, UltraBay eject and more.
+          For more information about this driver see 
+          <file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
+
+          This driver was formely known as ibm-acpi.
+
+          If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+
+config THINKPAD_ACPI_DEBUG
+        bool "Verbose debug mode"
+        depends on THINKPAD_ACPI
+        default n
+        ---help---
+          Enables extra debugging information, at the expense of a slightly
+          increase in driver size.
+
+          If you are not sure, say N here.
+
+config THINKPAD_ACPI_DOCK
+        bool "Legacy Docking Station Support"
+        depends on THINKPAD_ACPI
+        depends on ACPI_DOCK=n
+        default n
+        ---help---
+          Allows the thinkpad_acpi driver to handle docking station events.
+          This support was made obsolete by the generic ACPI docking station
+          support (CONFIG_ACPI_DOCK).  It will allow locking and removing the
+          laptop from the docking station, but will not properly connect PCI
+          devices.
+
+          If you are not sure, say N here.
+
+config THINKPAD_ACPI_BAY
+        bool "Legacy Removable Bay Support"
+        depends on THINKPAD_ACPI
+        default y
+        ---help---
+          Allows the thinkpad_acpi driver to handle removable bays.  It will
+          eletrically disable the device in the bay, and also generate
+          notifications when the bay lever is ejected or inserted.
+
+          If you are not sure, say Y here.
+
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7793ccd79049..e32516459138 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
 obj-$(CONFIG_TIFM_7XX1)         += tifm_7xx1.o
 obj-$(CONFIG_SGI_IOC4)          += ioc4.o
 obj-$(CONFIG_SONY_LAPTOP)       += sony-laptop.o
+obj-$(CONFIG_THINKPAD_ACPI)     += thinkpad_acpi.o
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index 4b232124a1ab..65c32a95e121 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -3,7 +3,7 @@
  *
  *
  *  Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
- *  Copyright (C) 2006 Corentin Chary
+ *  Copyright (C) 2006-2007 Corentin Chary
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -48,7 +48,7 @@
 #include <acpi/acpi_bus.h>
 #include <asm/uaccess.h>
 
-#define ASUS_LAPTOP_VERSION "0.40"
+#define ASUS_LAPTOP_VERSION "0.41"
 
 #define ASUS_HOTK_NAME          "Asus Laptop Support"
 #define ASUS_HOTK_CLASS         "hotkey"
@@ -81,7 +81,8 @@
 #define TLED_ON     0x08        //touchpad LED
 #define RLED_ON     0x10        //Record LED
 #define PLED_ON     0x20        //Phone LED
-#define LCD_ON      0x40        //LCD backlight
+#define GLED_ON     0x40        //Gaming LED
+#define LCD_ON      0x80        //LCD backlight
 
 #define ASUS_LOG    ASUS_HOTK_FILE ": "
 #define ASUS_ERR    KERN_ERR    ASUS_LOG
@@ -94,6 +95,19 @@ MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary");
 MODULE_DESCRIPTION(ASUS_HOTK_NAME);
 MODULE_LICENSE("GPL");
 
+/* WAPF defines the behavior of the Fn+Fx wlan key
+ * The significance of values is yet to be found, but
+ * most of the time:
+ * 0x0 will do nothing
+ * 0x1 will allow to control the device with Fn+Fx key.
+ * 0x4 will send an ACPI event (0x88) while pressing the Fn+Fx key
+ * 0x5 like 0x1 or 0x4
+ * So, if something doesn't work as you want, just try other values =)
+ */
+static uint wapf = 1;
+module_param(wapf, uint, 0644);
+MODULE_PARM_DESC(wapf, "WAPF value");
+
 #define ASUS_HANDLE(object, paths...)                                   \
         static acpi_handle  object##_handle = NULL;                     \
         static char *object##_paths[] = { paths }
@@ -103,6 +117,7 @@ ASUS_HANDLE(mled_set, ASUS_HOTK_PREFIX "MLED");
 ASUS_HANDLE(tled_set, ASUS_HOTK_PREFIX "TLED");
 ASUS_HANDLE(rled_set, ASUS_HOTK_PREFIX "RLED"); /* W1JC */
 ASUS_HANDLE(pled_set, ASUS_HOTK_PREFIX "PLED"); /* A7J */
+ASUS_HANDLE(gled_set, ASUS_HOTK_PREFIX "GLED"); /* G1, G2 (probably) */
 
 /* LEDD */
 ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
@@ -221,6 +236,7 @@ ASUS_LED(mled, "mail");
 ASUS_LED(tled, "touchpad");
 ASUS_LED(rled, "record");
 ASUS_LED(pled, "phone");
+ASUS_LED(gled, "gaming");
 
 /*
  * This function evaluates an ACPI method, given an int as parameter, the
@@ -245,32 +261,19 @@ static int write_acpi_int(acpi_handle handle, const char *method, int val,
         return (status == AE_OK);
 }
 
-static int read_acpi_int(acpi_handle handle, const char *method, int *val,
-                         struct acpi_object_list *params)
-{
-        struct acpi_buffer output;
-        union acpi_object out_obj;
-        acpi_status status;
-
-        output.length = sizeof(out_obj);
-        output.pointer = &out_obj;
-
-        status = acpi_evaluate_object(handle, (char *)method, params, &output);
-        *val = out_obj.integer.value;
-        return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
-}
-
 static int read_wireless_status(int mask)
 {
-        int status;
+        ulong status;
+        acpi_status rv = AE_OK;
 
         if (!wireless_status_handle)
                 return (hotk->status & mask) ? 1 : 0;
 
-        if (read_acpi_int(wireless_status_handle, NULL, &status, NULL)) {
-                return (status & mask) ? 1 : 0;
-        } else
+        rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
+        if (ACPI_FAILURE(rv))
                 printk(ASUS_WARNING "Error reading Wireless status\n");
+        else
+                return (status & mask) ? 1 : 0;
 
         return (hotk->status & mask) ? 1 : 0;
 }
@@ -285,19 +288,28 @@ static int read_status(int mask)
         return (hotk->status & mask) ? 1 : 0;
 }
 
-static void write_status(acpi_handle handle, int out, int mask, int invert)
+static void write_status(acpi_handle handle, int out, int mask)
 {
         hotk->status = (out) ? (hotk->status | mask) : (hotk->status & ~mask);
 
-        if (invert)             /* invert target value */
+        switch (mask) {
+        case MLED_ON:
                 out = !out & 0x1;
+                break;
+        case GLED_ON:
+                out = (out & 0x1) + 1;
+                break;
+        default:
+                out &= 0x1;
+                break;
+        }
 
         if (handle && !write_acpi_int(handle, NULL, out, NULL))
-                printk(ASUS_WARNING " write failed\n");
+                printk(ASUS_WARNING " write failed %x\n", mask);
 }
 
 /* /sys/class/led handlers */
-#define ASUS_LED_HANDLER(object, mask, invert)                          \
+#define ASUS_LED_HANDLER(object, mask)                                  \
         static void object##_led_set(struct led_classdev *led_cdev,     \
                                      enum led_brightness value)         \
         {                                                               \
@@ -307,13 +319,14 @@ static void write_status(acpi_handle handle, int out, int mask, int invert)
         static void object##_led_update(struct work_struct *ignored)    \
         {                                                               \
                 int value = object##_led_wk;                            \
-                write_status(object##_set_handle, value, (mask), (invert)); \
+                write_status(object##_set_handle, value, (mask));       \
         }
 
-ASUS_LED_HANDLER(mled, MLED_ON, 1);
-ASUS_LED_HANDLER(pled, PLED_ON, 0);
-ASUS_LED_HANDLER(rled, RLED_ON, 0);
-ASUS_LED_HANDLER(tled, TLED_ON, 0);
+ASUS_LED_HANDLER(mled, MLED_ON);
+ASUS_LED_HANDLER(pled, PLED_ON);
+ASUS_LED_HANDLER(rled, RLED_ON);
+ASUS_LED_HANDLER(tled, TLED_ON);
+ASUS_LED_HANDLER(gled, GLED_ON);
 
 static int get_lcd_state(void)
 {
@@ -338,7 +351,7 @@ static int set_lcd_state(int value)
                         printk(ASUS_WARNING "Error switching LCD\n");
         }
 
-        write_status(NULL, lcd, LCD_ON, 0);
+        write_status(NULL, lcd, LCD_ON);
         return 0;
 }
 
@@ -354,9 +367,11 @@ static void lcd_blank(int blank)
 
 static int read_brightness(struct backlight_device *bd)
 {
-        int value;
+        ulong value;
+        acpi_status rv = AE_OK;
 
-        if (!read_acpi_int(brightness_get_handle, NULL, &value, NULL))
+        rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
+        if (ACPI_FAILURE(rv))
                 printk(ASUS_WARNING "Error reading brightness\n");
 
         return value;
@@ -403,8 +418,10 @@ static ssize_t show_infos(struct device *dev,
                           struct device_attribute *attr, char *page)
 {
         int len = 0;
-        int temp;
+        ulong temp;
         char buf[16];           //enough for all info
+        acpi_status rv = AE_OK;
+
         /*
          * We use the easy way, we don't care of off and count, so we don't set eof
          * to 1
@@ -418,9 +435,10 @@ static ssize_t show_infos(struct device *dev,
          * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
          * The significance of others is yet to be found.
          */
-        if (read_acpi_int(hotk->handle, "SFUN", &temp, NULL))
-                len +=
-                    sprintf(page + len, "SFUN value         : 0x%04x\n", temp);
+        rv = acpi_evaluate_integer(hotk->handle, "SFUN", NULL, &temp);
+        if (!ACPI_FAILURE(rv))
+                len += sprintf(page + len, "SFUN value         : 0x%04x\n",
+                               (uint) temp);
         /*
          * Another value for userspace: the ASYM method returns 0x02 for
          * battery low and 0x04 for battery critical, its readings tend to be
@@ -428,9 +446,10 @@ static ssize_t show_infos(struct device *dev,
          * Note: since not all the laptops provide this method, errors are
          * silently ignored.
          */
-        if (read_acpi_int(hotk->handle, "ASYM", &temp, NULL))
-                len +=
-                    sprintf(page + len, "ASYM value         : 0x%04x\n", temp);
+        rv = acpi_evaluate_integer(hotk->handle, "ASYM", NULL, &temp);
+        if (!ACPI_FAILURE(rv))
+                len += sprintf(page + len, "ASYM value         : 0x%04x\n",
+                               (uint) temp);
         if (asus_info) {
                 snprintf(buf, 16, "%d", asus_info->length);
                 len += sprintf(page + len, "DSDT length        : %s\n", buf);
@@ -465,7 +484,7 @@ static int parse_arg(const char *buf, unsigned long count, int *val)
 }
 
 static ssize_t store_status(const char *buf, size_t count,
-                            acpi_handle handle, int mask, int invert)
+                            acpi_handle handle, int mask)
 {
         int rv, value;
         int out = 0;
@@ -474,7 +493,7 @@ static ssize_t store_status(const char *buf, size_t count,
         if (rv > 0)
                 out = value ? 1 : 0;
 
-        write_status(handle, out, mask, invert);
+        write_status(handle, out, mask);
 
         return rv;
 }
@@ -515,7 +534,7 @@ static ssize_t show_wlan(struct device *dev,
 static ssize_t store_wlan(struct device *dev, struct device_attribute *attr,
                           const char *buf, size_t count)
 {
-        return store_status(buf, count, wl_switch_handle, WL_ON, 0);
+        return store_status(buf, count, wl_switch_handle, WL_ON);
 }
 
 /*
@@ -531,7 +550,7 @@ static ssize_t store_bluetooth(struct device *dev,
                                struct device_attribute *attr, const char *buf,
                                size_t count)
 {
-        return store_status(buf, count, bt_switch_handle, BT_ON, 0);
+        return store_status(buf, count, bt_switch_handle, BT_ON);
 }
 
 /*
@@ -547,12 +566,15 @@ static void set_display(int value)
 
 static int read_display(void)
 {
-        int value = 0;
+        ulong value = 0;
+        acpi_status rv = AE_OK;
 
         /* In most of the case, we know how to set the display, but sometime
            we can't read it */
         if (display_get_handle) {
-                if (!read_acpi_int(display_get_handle, NULL, &value, NULL))
+                rv = acpi_evaluate_integer(display_get_handle, NULL,
+                                           NULL, &value);
+                if (ACPI_FAILURE(rv))
                         printk(ASUS_WARNING "Error reading display status\n");
         }
 
@@ -656,10 +678,10 @@ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
          * switched
          */
         if (event == ATKD_LCD_ON) {
-                write_status(NULL, 1, LCD_ON, 0);
+                write_status(NULL, 1, LCD_ON);
                 lcd_blank(FB_BLANK_UNBLANK);
         } else if (event == ATKD_LCD_OFF) {
-                write_status(NULL, 0, LCD_ON, 0);
+                write_status(NULL, 0, LCD_ON);
                 lcd_blank(FB_BLANK_POWERDOWN);
         }
 
@@ -771,7 +793,7 @@ static int asus_hotk_get_info(void)
 {
         struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
         union acpi_object *model = NULL;
-        int bsts_result, hwrs_result;
+        ulong bsts_result, hwrs_result;
         char *string = NULL;
         acpi_status status;
 
@@ -794,11 +816,16 @@ static int asus_hotk_get_info(void)
         }
 
         /* This needs to be called for some laptops to init properly */
-        if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result, NULL))
+        status =
+            acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
+        if (ACPI_FAILURE(status))
                 printk(ASUS_WARNING "Error calling BSTS\n");
         else if (bsts_result)
                 printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
-                       bsts_result);
+                       (uint) bsts_result);
+
+        /* This too ... */
+        write_acpi_int(hotk->handle, "CWAP", wapf, NULL);
 
         /*
          * Try to match the object returned by INIT to the specific model.
@@ -831,6 +858,7 @@ static int asus_hotk_get_info(void)
         ASUS_HANDLE_INIT(tled_set);
         ASUS_HANDLE_INIT(rled_set);
         ASUS_HANDLE_INIT(pled_set);
+        ASUS_HANDLE_INIT(gled_set);
 
         ASUS_HANDLE_INIT(ledd_set);
 
@@ -840,7 +868,9 @@ static int asus_hotk_get_info(void)
          * The significance of others is yet to be found.
          * If we don't find the method, we assume the device are present.
          */
-        if (!read_acpi_int(hotk->handle, "HRWS", &hwrs_result, NULL))
+        status =
+            acpi_evaluate_integer(hotk->handle, "HRWS", NULL, &hwrs_result);
+        if (ACPI_FAILURE(status))
                 hwrs_result = WL_HWRS | BT_HWRS;
 
         if (hwrs_result & WL_HWRS)
@@ -928,11 +958,15 @@ static int asus_hotk_add(struct acpi_device *device)
         asus_hotk_found = 1;
 
         /* WLED and BLED are on by default */
-        write_status(bt_switch_handle, 1, BT_ON, 0);
-        write_status(wl_switch_handle, 1, WL_ON, 0);
+        write_status(bt_switch_handle, 1, BT_ON);
+        write_status(wl_switch_handle, 1, WL_ON);
+
+        /* If the h/w switch is off, we need to check the real status */
+        write_status(NULL, read_status(BT_ON), BT_ON);
+        write_status(NULL, read_status(WL_ON), WL_ON);
 
         /* LCD Backlight is on by default */
-        write_status(NULL, 1, LCD_ON, 0);
+        write_status(NULL, 1, LCD_ON);
 
         /* LED display is off by default */
         hotk->ledd_status = 0xFFF;
@@ -991,6 +1025,7 @@ static void asus_led_exit(void)
         ASUS_LED_UNREGISTER(tled);
         ASUS_LED_UNREGISTER(pled);
         ASUS_LED_UNREGISTER(rled);
+        ASUS_LED_UNREGISTER(gled);
 
         destroy_workqueue(led_workqueue);
 }
@@ -1062,6 +1097,10 @@ static int asus_led_init(struct device *dev)
         if (rv)
                 return rv;
 
+        rv = ASUS_LED_REGISTER(gled, dev);
+        if (rv)
+                return rv;
+
         led_workqueue = create_singlethread_workqueue("led_workqueue");
         if (!led_workqueue)
                 return -ENOMEM;
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index ac708bc2f9f3..c15c1f61bd1b 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -1,5 +1,5 @@
 /*
- * ACPI Sony Notebook Control Driver (SNC)
+ * ACPI Sony Notebook Control Driver (SNC and SPIC)
  *
  * Copyright (C) 2004-2005 Stelian Pop <stelian@popies.net>
  * Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
@@ -7,6 +7,25 @@
  * Parts of this driver inspired from asus_acpi.c and ibm_acpi.c
  * which are copyrighted by their respective authors.
  *
+ * The SNY6001 driver part is based on the sonypi driver which includes
+ * material from:
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+ *
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -31,40 +50,404 @@
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/kfifo.h>
+#include <linux/workqueue.h>
+#include <linux/acpi.h>
 #include <acpi/acpi_drivers.h>
 #include <acpi/acpi_bus.h>
 #include <asm/uaccess.h>
+#include <linux/sonypi.h>
+#include <linux/sony-laptop.h>
+#ifdef CONFIG_SONY_LAPTOP_OLD
+#include <linux/poll.h>
+#include <linux/miscdevice.h>
+#endif
 
-#define ACPI_SNC_CLASS          "sony"
-#define ACPI_SNC_HID            "SNY5001"
-#define ACPI_SNC_DRIVER_NAME    "ACPI Sony Notebook Control Driver v0.4"
+#define DRV_PFX                 "sony-laptop: "
+#define dprintk(msg...)         do {                    \
+        if (debug) printk(KERN_WARNING DRV_PFX  msg);   \
+} while (0)
 
-/* the device uses 1-based values, while the backlight subsystem uses
-   0-based values */
-#define SONY_MAX_BRIGHTNESS     8
+#define SONY_LAPTOP_DRIVER_VERSION      "0.5"
+
+#define SONY_NC_CLASS           "sony-nc"
+#define SONY_NC_HID             "SNY5001"
+#define SONY_NC_DRIVER_NAME     "Sony Notebook Control Driver"
 
-#define LOG_PFX                 KERN_WARNING "sony-laptop: "
+#define SONY_PIC_CLASS          "sony-pic"
+#define SONY_PIC_HID            "SNY6001"
+#define SONY_PIC_DRIVER_NAME    "Sony Programmable IO Control Driver"
 
 MODULE_AUTHOR("Stelian Pop, Mattia Dongili");
-MODULE_DESCRIPTION(ACPI_SNC_DRIVER_NAME);
+MODULE_DESCRIPTION("Sony laptop extras driver (SPIC and SNC ACPI device)");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(SONY_LAPTOP_DRIVER_VERSION);
 
 static int debug;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "set this to 1 (and RTFM) if you want to help "
                  "the development of this driver");
 
-static ssize_t sony_acpi_show(struct device *, struct device_attribute *,
+static int no_spic;             /* = 0 */
+module_param(no_spic, int, 0444);
+MODULE_PARM_DESC(no_spic,
+                 "set this if you don't want to enable the SPIC device");
+
+static int compat;              /* = 0 */
+module_param(compat, int, 0444);
+MODULE_PARM_DESC(compat,
+                 "set this if you want to enable backward compatibility mode");
+
+static unsigned long mask = 0xffffffff;
+module_param(mask, ulong, 0644);
+MODULE_PARM_DESC(mask,
+                 "set this to the mask of event you want to enable (see doc)");
+
+static int camera;              /* = 0 */
+module_param(camera, int, 0444);
+MODULE_PARM_DESC(camera,
+                 "set this to 1 to enable Motion Eye camera controls "
+                 "(only use it if you have a C1VE or C1VN model)");
+
+#ifdef CONFIG_SONY_LAPTOP_OLD
+static int minor = -1;
+module_param(minor, int, 0);
+MODULE_PARM_DESC(minor,
+                 "minor number of the misc device for the SPIC compatibility code, "
+                 "default is -1 (automatic)");
+#endif
+
+/*********** Input Devices ***********/
+
+#define SONY_LAPTOP_BUF_SIZE    128
+struct sony_laptop_input_s {
+        atomic_t                users;
+        struct input_dev        *jog_dev;
+        struct input_dev        *key_dev;
+        struct kfifo            *fifo;
+        spinlock_t              fifo_lock;
+        struct workqueue_struct *wq;
+};
+static struct sony_laptop_input_s sony_laptop_input = {
+        .users = ATOMIC_INIT(0),
+};
+
+struct sony_laptop_keypress {
+        struct input_dev *dev;
+        int key;
+};
+
+/* Correspondance table between sonypi events and input layer events */
+static struct {
+        int sonypiev;
+        int inputev;
+} sony_laptop_inputkeys[] = {
+        { SONYPI_EVENT_CAPTURE_PRESSED,         KEY_CAMERA },
+        { SONYPI_EVENT_FNKEY_ONLY,              KEY_FN },
+        { SONYPI_EVENT_FNKEY_ESC,               KEY_FN_ESC },
+        { SONYPI_EVENT_FNKEY_F1,                KEY_FN_F1 },
+        { SONYPI_EVENT_FNKEY_F2,                KEY_FN_F2 },
+        { SONYPI_EVENT_FNKEY_F3,                KEY_FN_F3 },
+        { SONYPI_EVENT_FNKEY_F4,                KEY_FN_F4 },
+        { SONYPI_EVENT_FNKEY_F5,                KEY_FN_F5 },
+        { SONYPI_EVENT_FNKEY_F6,                KEY_FN_F6 },
+        { SONYPI_EVENT_FNKEY_F7,                KEY_FN_F7 },
+        { SONYPI_EVENT_FNKEY_F8,                KEY_FN_F8 },
+        { SONYPI_EVENT_FNKEY_F9,                KEY_FN_F9 },
+        { SONYPI_EVENT_FNKEY_F10,               KEY_FN_F10 },
+        { SONYPI_EVENT_FNKEY_F11,               KEY_FN_F11 },
+        { SONYPI_EVENT_FNKEY_F12,               KEY_FN_F12 },
+        { SONYPI_EVENT_FNKEY_1,                 KEY_FN_1 },
+        { SONYPI_EVENT_FNKEY_2,                 KEY_FN_2 },
+        { SONYPI_EVENT_FNKEY_D,                 KEY_FN_D },
+        { SONYPI_EVENT_FNKEY_E,                 KEY_FN_E },
+        { SONYPI_EVENT_FNKEY_F,                 KEY_FN_F },
+        { SONYPI_EVENT_FNKEY_S,                 KEY_FN_S },
+        { SONYPI_EVENT_FNKEY_B,                 KEY_FN_B },
+        { SONYPI_EVENT_BLUETOOTH_PRESSED,       KEY_BLUE },
+        { SONYPI_EVENT_BLUETOOTH_ON,            KEY_BLUE },
+        { SONYPI_EVENT_PKEY_P1,                 KEY_PROG1 },
+        { SONYPI_EVENT_PKEY_P2,                 KEY_PROG2 },
+        { SONYPI_EVENT_PKEY_P3,                 KEY_PROG3 },
+        { SONYPI_EVENT_BACK_PRESSED,            KEY_BACK },
+        { SONYPI_EVENT_HELP_PRESSED,            KEY_HELP },
+        { SONYPI_EVENT_ZOOM_PRESSED,            KEY_ZOOM },
+        { SONYPI_EVENT_THUMBPHRASE_PRESSED,     BTN_THUMB },
+        { 0, 0 },
+};
+
+/* release buttons after a short delay if pressed */
+static void do_sony_laptop_release_key(struct work_struct *work)
+{
+        struct sony_laptop_keypress kp;
+
+        while (kfifo_get(sony_laptop_input.fifo, (unsigned char *)&kp,
+                         sizeof(kp)) == sizeof(kp)) {
+                msleep(10);
+                input_report_key(kp.dev, kp.key, 0);
+                input_sync(kp.dev);
+        }
+}
+static DECLARE_WORK(sony_laptop_release_key_work,
+                do_sony_laptop_release_key);
+
+/* forward event to the input subsytem */
+static void sony_laptop_report_input_event(u8 event)
+{
+        struct input_dev *jog_dev = sony_laptop_input.jog_dev;
+        struct input_dev *key_dev = sony_laptop_input.key_dev;
+        struct sony_laptop_keypress kp = { NULL };
+        int i;
+
+        if (event == SONYPI_EVENT_FNKEY_RELEASED) {
+                /* Nothing, not all VAIOs generate this event */
+                return;
+        }
+
+        /* report events */
+        switch (event) {
+        /* jog_dev events */
+        case SONYPI_EVENT_JOGDIAL_UP:
+        case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
+                input_report_rel(jog_dev, REL_WHEEL, 1);
+                input_sync(jog_dev);
+                return;
+
+        case SONYPI_EVENT_JOGDIAL_DOWN:
+        case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
+                input_report_rel(jog_dev, REL_WHEEL, -1);
+                input_sync(jog_dev);
+                return;
+
+        /* key_dev events */
+        case SONYPI_EVENT_JOGDIAL_PRESSED:
+                kp.key = BTN_MIDDLE;
+                kp.dev = jog_dev;
+                break;
+
+        default:
+                for (i = 0; sony_laptop_inputkeys[i].sonypiev; i++)
+                        if (event == sony_laptop_inputkeys[i].sonypiev) {
+                                kp.dev = key_dev;
+                                kp.key = sony_laptop_inputkeys[i].inputev;
+                                break;
+                        }
+                break;
+        }
+
+        if (kp.dev) {
+                input_report_key(kp.dev, kp.key, 1);
+                input_sync(kp.dev);
+                kfifo_put(sony_laptop_input.fifo,
+                          (unsigned char *)&kp, sizeof(kp));
+
+                if (!work_pending(&sony_laptop_release_key_work))
+                        queue_work(sony_laptop_input.wq,
+                                        &sony_laptop_release_key_work);
+        } else
+                dprintk("unknown input event %.2x\n", event);
+}
+
+static int sony_laptop_setup_input(void)
+{
+        struct input_dev *jog_dev;
+        struct input_dev *key_dev;
+        int i;
+        int error;
+
+        /* don't run again if already initialized */
+        if (atomic_add_return(1, &sony_laptop_input.users) > 1)
+                return 0;
+
+        /* kfifo */
+        spin_lock_init(&sony_laptop_input.fifo_lock);
+        sony_laptop_input.fifo =
+                kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL,
+                            &sony_laptop_input.fifo_lock);
+        if (IS_ERR(sony_laptop_input.fifo)) {
+                printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n");
+                error = PTR_ERR(sony_laptop_input.fifo);
+                goto err_dec_users;
+        }
+
+        /* init workqueue */
+        sony_laptop_input.wq = create_singlethread_workqueue("sony-laptop");
+        if (!sony_laptop_input.wq) {
+                printk(KERN_ERR DRV_PFX
+                                "Unabe to create workqueue.\n");
+                error = -ENXIO;
+                goto err_free_kfifo;
+        }
+
+        /* input keys */
+        key_dev = input_allocate_device();
+        if (!key_dev) {
+                error = -ENOMEM;
+                goto err_destroy_wq;
+        }
+
+        key_dev->name = "Sony Vaio Keys";
+        key_dev->id.bustype = BUS_ISA;
+        key_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+        /* Initialize the Input Drivers: special keys */
+        key_dev->evbit[0] = BIT(EV_KEY);
+        for (i = 0; sony_laptop_inputkeys[i].sonypiev; i++)
+                if (sony_laptop_inputkeys[i].inputev)
+                        set_bit(sony_laptop_inputkeys[i].inputev,
+                                        key_dev->keybit);
+
+        error = input_register_device(key_dev);
+        if (error)
+                goto err_free_keydev;
+
+        sony_laptop_input.key_dev = key_dev;
+
+        /* jogdial */
+        jog_dev = input_allocate_device();
+        if (!jog_dev) {
+                error = -ENOMEM;
+                goto err_unregister_keydev;
+        }
+
+        jog_dev->name = "Sony Vaio Jogdial";
+        jog_dev->id.bustype = BUS_ISA;
+        jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+        jog_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+        jog_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_MIDDLE);
+        jog_dev->relbit[0] = BIT(REL_WHEEL);
+
+        error = input_register_device(jog_dev);
+        if (error)
+                goto err_free_jogdev;
+
+        sony_laptop_input.jog_dev = jog_dev;
+
+        return 0;
+
+err_free_jogdev:
+        input_free_device(jog_dev);
+
+err_unregister_keydev:
+        input_unregister_device(key_dev);
+        /* to avoid kref underflow below at input_free_device */
+        key_dev = NULL;
+
+err_free_keydev:
+        input_free_device(key_dev);
+
+err_destroy_wq:
+        destroy_workqueue(sony_laptop_input.wq);
+
+err_free_kfifo:
+        kfifo_free(sony_laptop_input.fifo);
+
+err_dec_users:
+        atomic_dec(&sony_laptop_input.users);
+        return error;
+}
+
+static void sony_laptop_remove_input(void)
+{
+        /* cleanup only after the last user has gone */
+        if (!atomic_dec_and_test(&sony_laptop_input.users))
+                return;
+
+        /* flush workqueue first */
+        flush_workqueue(sony_laptop_input.wq);
+
+        /* destroy input devs */
+        input_unregister_device(sony_laptop_input.key_dev);
+        sony_laptop_input.key_dev = NULL;
+
+        if (sony_laptop_input.jog_dev) {
+                input_unregister_device(sony_laptop_input.jog_dev);
+                sony_laptop_input.jog_dev = NULL;
+        }
+
+        destroy_workqueue(sony_laptop_input.wq);
+        kfifo_free(sony_laptop_input.fifo);
+}
+
+/*********** Platform Device ***********/
+
+static atomic_t sony_pf_users = ATOMIC_INIT(0);
+static struct platform_driver sony_pf_driver = {
+        .driver = {
+                   .name = "sony-laptop",
+                   .owner = THIS_MODULE,
+                   }
+};
+static struct platform_device *sony_pf_device;
+
+static int sony_pf_add(void)
+{
+        int ret = 0;
+
+        /* don't run again if already initialized */
+        if (atomic_add_return(1, &sony_pf_users) > 1)
+                return 0;
+
+        ret = platform_driver_register(&sony_pf_driver);
+        if (ret)
+                goto out;
+
+        sony_pf_device = platform_device_alloc("sony-laptop", -1);
+        if (!sony_pf_device) {
+                ret = -ENOMEM;
+                goto out_platform_registered;
+        }
+
+        ret = platform_device_add(sony_pf_device);
+        if (ret)
+                goto out_platform_alloced;
+
+        return 0;
+
+      out_platform_alloced:
+        platform_device_put(sony_pf_device);
+        sony_pf_device = NULL;
+      out_platform_registered:
+        platform_driver_unregister(&sony_pf_driver);
+      out:
+        atomic_dec(&sony_pf_users);
+        return ret;
+}
+
+static void sony_pf_remove(void)
+{
+        /* deregister only after the last user has gone */
+        if (!atomic_dec_and_test(&sony_pf_users))
+                return;
+
+        platform_device_del(sony_pf_device);
+        platform_device_put(sony_pf_device);
+        platform_driver_unregister(&sony_pf_driver);
+}
+
+/*********** SNC (SNY5001) Device ***********/
+
+/* the device uses 1-based values, while the backlight subsystem uses
+   0-based values */
+#define SONY_MAX_BRIGHTNESS     8
+
+#define SNC_VALIDATE_IN         0
+#define SNC_VALIDATE_OUT        1
+
+static ssize_t sony_nc_sysfs_show(struct device *, struct device_attribute *,
                               char *);
-static ssize_t sony_acpi_store(struct device *, struct device_attribute *,
+static ssize_t sony_nc_sysfs_store(struct device *, struct device_attribute *,
                                const char *, size_t);
 static int boolean_validate(const int, const int);
 static int brightness_default_validate(const int, const int);
 
-#define SNC_VALIDATE_IN         0
-#define SNC_VALIDATE_OUT        1
-
-struct sony_acpi_value {
+struct sony_nc_value {
         char *name;             /* name of the entry */
         char **acpiget;         /* names of the ACPI get function */
         char **acpiset;         /* names of the ACPI set function */
@@ -75,65 +458,65 @@ struct sony_acpi_value {
         struct device_attribute devattr;        /* sysfs atribute */
 };
 
-#define HANDLE_NAMES(_name, _values...) \
+#define SNC_HANDLE_NAMES(_name, _values...) \
         static char *snc_##_name[] = { _values, NULL }
 
-#define SONY_ACPI_VALUE(_name, _getters, _setters, _validate, _debug) \
+#define SNC_HANDLE(_name, _getters, _setters, _validate, _debug) \
         { \
                 .name           = __stringify(_name), \
                 .acpiget        = _getters, \
                 .acpiset        = _setters, \
                 .validate       = _validate, \
                 .debug          = _debug, \
-                .devattr        = __ATTR(_name, 0, sony_acpi_show, sony_acpi_store), \
+                .devattr        = __ATTR(_name, 0, sony_nc_sysfs_show, sony_nc_sysfs_store), \
         }
 
-#define SONY_ACPI_VALUE_NULL    { .name = NULL }
+#define SNC_HANDLE_NULL { .name = NULL }
 
-HANDLE_NAMES(fnkey_get, "GHKE");
+SNC_HANDLE_NAMES(fnkey_get, "GHKE");
 
-HANDLE_NAMES(brightness_def_get, "GPBR");
-HANDLE_NAMES(brightness_def_set, "SPBR");
+SNC_HANDLE_NAMES(brightness_def_get, "GPBR");
+SNC_HANDLE_NAMES(brightness_def_set, "SPBR");
 
-HANDLE_NAMES(cdpower_get, "GCDP");
-HANDLE_NAMES(cdpower_set, "SCDP", "CDPW");
+SNC_HANDLE_NAMES(cdpower_get, "GCDP");
+SNC_HANDLE_NAMES(cdpower_set, "SCDP", "CDPW");
 
-HANDLE_NAMES(audiopower_get, "GAZP");
-HANDLE_NAMES(audiopower_set, "AZPW");
+SNC_HANDLE_NAMES(audiopower_get, "GAZP");
+SNC_HANDLE_NAMES(audiopower_set, "AZPW");
 
-HANDLE_NAMES(lanpower_get, "GLNP");
-HANDLE_NAMES(lanpower_set, "LNPW");
+SNC_HANDLE_NAMES(lanpower_get, "GLNP");
+SNC_HANDLE_NAMES(lanpower_set, "LNPW");
 
-HANDLE_NAMES(PID_get, "GPID");
+SNC_HANDLE_NAMES(PID_get, "GPID");
 
-HANDLE_NAMES(CTR_get, "GCTR");
-HANDLE_NAMES(CTR_set, "SCTR");
+SNC_HANDLE_NAMES(CTR_get, "GCTR");
+SNC_HANDLE_NAMES(CTR_set, "SCTR");
 
-HANDLE_NAMES(PCR_get, "GPCR");
-HANDLE_NAMES(PCR_set, "SPCR");
+SNC_HANDLE_NAMES(PCR_get, "GPCR");
+SNC_HANDLE_NAMES(PCR_set, "SPCR");
 
-HANDLE_NAMES(CMI_get, "GCMI");
-HANDLE_NAMES(CMI_set, "SCMI");
+SNC_HANDLE_NAMES(CMI_get, "GCMI");
+SNC_HANDLE_NAMES(CMI_set, "SCMI");
 
-static struct sony_acpi_value sony_acpi_values[] = {
-        SONY_ACPI_VALUE(brightness_default, snc_brightness_def_get,
+static struct sony_nc_value sony_nc_values[] = {
+        SNC_HANDLE(brightness_default, snc_brightness_def_get,
                         snc_brightness_def_set, brightness_default_validate, 0),
-        SONY_ACPI_VALUE(fnkey, snc_fnkey_get, NULL, NULL, 0),
-        SONY_ACPI_VALUE(cdpower, snc_cdpower_get, snc_cdpower_set, boolean_validate, 0),
-        SONY_ACPI_VALUE(audiopower, snc_audiopower_get, snc_audiopower_set,
+        SNC_HANDLE(fnkey, snc_fnkey_get, NULL, NULL, 0),
+        SNC_HANDLE(cdpower, snc_cdpower_get, snc_cdpower_set, boolean_validate, 0),
+        SNC_HANDLE(audiopower, snc_audiopower_get, snc_audiopower_set,
                         boolean_validate, 0),
-        SONY_ACPI_VALUE(lanpower, snc_lanpower_get, snc_lanpower_set,
+        SNC_HANDLE(lanpower, snc_lanpower_get, snc_lanpower_set,
                         boolean_validate, 1),
         /* unknown methods */
-        SONY_ACPI_VALUE(PID, snc_PID_get, NULL, NULL, 1),
-        SONY_ACPI_VALUE(CTR, snc_CTR_get, snc_CTR_set, NULL, 1),
-        SONY_ACPI_VALUE(PCR, snc_PCR_get, snc_PCR_set, NULL, 1),
-        SONY_ACPI_VALUE(CMI, snc_CMI_get, snc_CMI_set, NULL, 1),
-        SONY_ACPI_VALUE_NULL
+        SNC_HANDLE(PID, snc_PID_get, NULL, NULL, 1),
+        SNC_HANDLE(CTR, snc_CTR_get, snc_CTR_set, NULL, 1),
+        SNC_HANDLE(PCR, snc_PCR_get, snc_PCR_set, NULL, 1),
+        SNC_HANDLE(CMI, snc_CMI_get, snc_CMI_set, NULL, 1),
+        SNC_HANDLE_NULL
 };
 
-static acpi_handle sony_acpi_handle;
-static struct acpi_device *sony_acpi_acpi_device = NULL;
+static acpi_handle sony_nc_acpi_handle;
+static struct acpi_device *sony_nc_acpi_device = NULL;
 
 /*
  * acpi_evaluate_object wrappers
@@ -153,7 +536,7 @@ static int acpi_callgetfunc(acpi_handle handle, char *name, int *result)
                 return 0;
         }
 
-        printk(LOG_PFX "acpi_callreadfunc failed\n");
+        printk(KERN_WARNING DRV_PFX "acpi_callreadfunc failed\n");
 
         return -1;
 }
@@ -179,7 +562,7 @@ static int acpi_callsetfunc(acpi_handle handle, char *name, int value,
         if (status == AE_OK) {
                 if (result != NULL) {
                         if (out_obj.type != ACPI_TYPE_INTEGER) {
-                                printk(LOG_PFX "acpi_evaluate_object bad "
+                                printk(KERN_WARNING DRV_PFX "acpi_evaluate_object bad "
                                        "return type\n");
                                 return -1;
                         }
@@ -188,13 +571,13 @@ static int acpi_callsetfunc(acpi_handle handle, char *name, int value,
                 return 0;
         }
 
-        printk(LOG_PFX "acpi_evaluate_object failed\n");
+        printk(KERN_WARNING DRV_PFX "acpi_evaluate_object failed\n");
 
         return -1;
 }
 
 /*
- * sony_acpi_values input/output validate functions
+ * sony_nc_values input/output validate functions
  */
 
 /* brightness_default_validate:
@@ -229,19 +612,19 @@ static int boolean_validate(const int direction, const int value)
 }
 
 /*
- * Sysfs show/store common to all sony_acpi_values
+ * Sysfs show/store common to all sony_nc_values
  */
-static ssize_t sony_acpi_show(struct device *dev, struct device_attribute *attr,
+static ssize_t sony_nc_sysfs_show(struct device *dev, struct device_attribute *attr,
                               char *buffer)
 {
         int value;
-        struct sony_acpi_value *item =
-            container_of(attr, struct sony_acpi_value, devattr);
+        struct sony_nc_value *item =
+            container_of(attr, struct sony_nc_value, devattr);
 
         if (!*item->acpiget)
                 return -EIO;
 
-        if (acpi_callgetfunc(sony_acpi_handle, *item->acpiget, &value) < 0)
+        if (acpi_callgetfunc(sony_nc_acpi_handle, *item->acpiget, &value) < 0)
                 return -EIO;
 
         if (item->validate)
@@ -250,13 +633,13 @@ static ssize_t sony_acpi_show(struct device *dev, struct device_attribute *attr,
         return snprintf(buffer, PAGE_SIZE, "%d\n", value);
 }
 
-static ssize_t sony_acpi_store(struct device *dev,
+static ssize_t sony_nc_sysfs_store(struct device *dev,
                                struct device_attribute *attr,
                                const char *buffer, size_t count)
 {
         int value;
-        struct sony_acpi_value *item =
-            container_of(attr, struct sony_acpi_value, devattr);
+        struct sony_nc_value *item =
+            container_of(attr, struct sony_nc_value, devattr);
 
         if (!item->acpiset)
                 return -EIO;
@@ -272,118 +655,20 @@ static ssize_t sony_acpi_store(struct device *dev,
         if (value < 0)
                 return value;
 
-        if (acpi_callsetfunc(sony_acpi_handle, *item->acpiset, value, NULL) < 0)
+        if (acpi_callsetfunc(sony_nc_acpi_handle, *item->acpiset, value, NULL) < 0)
                 return -EIO;
         item->value = value;
         item->valid = 1;
         return count;
 }
 
-/*
- * Platform device
- */
-static struct platform_driver sncpf_driver = {
-        .driver = {
-                   .name = "sony-laptop",
-                   .owner = THIS_MODULE,
-                   }
-};
-static struct platform_device *sncpf_device;
-
-static int sony_snc_pf_add(void)
-{
-        acpi_handle handle;
-        struct sony_acpi_value *item;
-        int ret = 0;
-
-        ret = platform_driver_register(&sncpf_driver);
-        if (ret)
-                goto out;
-
-        sncpf_device = platform_device_alloc("sony-laptop", -1);
-        if (!sncpf_device) {
-                ret = -ENOMEM;
-                goto out_platform_registered;
-        }
-
-        ret = platform_device_add(sncpf_device);
-        if (ret)
-                goto out_platform_alloced;
-
-        for (item = sony_acpi_values; item->name; ++item) {
-
-                if (!debug && item->debug)
-                        continue;
-
-                /* find the available acpiget as described in the DSDT */
-                for (; item->acpiget && *item->acpiget; ++item->acpiget) {
-                        if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle,
-                                                         *item->acpiget,
-                                                         &handle))) {
-                                if (debug)
-                                        printk(LOG_PFX "Found %s getter: %s\n",
-                                               item->name, *item->acpiget);
-                                item->devattr.attr.mode |= S_IRUGO;
-                                break;
-                        }
-                }
-
-                /* find the available acpiset as described in the DSDT */
-                for (; item->acpiset && *item->acpiset; ++item->acpiset) {
-                        if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle,
-                                                         *item->acpiset,
-                                                         &handle))) {
-                                if (debug)
-                                        printk(LOG_PFX "Found %s setter: %s\n",
-                                               item->name, *item->acpiset);
-                                item->devattr.attr.mode |= S_IWUSR;
-                                break;
-                        }
-                }
-
-                if (item->devattr.attr.mode != 0) {
-                        ret =
-                            device_create_file(&sncpf_device->dev,
-                                               &item->devattr);
-                        if (ret)
-                                goto out_sysfs;
-                }
-        }
-
-        return 0;
-
-      out_sysfs:
-        for (item = sony_acpi_values; item->name; ++item) {
-                device_remove_file(&sncpf_device->dev, &item->devattr);
-        }
-        platform_device_del(sncpf_device);
-      out_platform_alloced:
-        platform_device_put(sncpf_device);
-      out_platform_registered:
-        platform_driver_unregister(&sncpf_driver);
-      out:
-        return ret;
-}
-
-static void sony_snc_pf_remove(void)
-{
-        struct sony_acpi_value *item;
-
-        for (item = sony_acpi_values; item->name; ++item) {
-                device_remove_file(&sncpf_device->dev, &item->devattr);
-        }
-
-        platform_device_del(sncpf_device);
-        platform_device_put(sncpf_device);
-        platform_driver_unregister(&sncpf_driver);
-}
 
 /*
  * Backlight device
  */
 static int sony_backlight_update_status(struct backlight_device *bd)
 {
-        return acpi_callsetfunc(sony_acpi_handle, "SBRT",
+        return acpi_callsetfunc(sony_nc_acpi_handle, "SBRT",
                                 bd->props.brightness + 1, NULL);
 }
 
@@ -391,7 +676,7 @@ static int sony_backlight_get_brightness(struct backlight_device *bd)
 {
         int value;
 
-        if (acpi_callgetfunc(sony_acpi_handle, "GBRT", &value))
+        if (acpi_callgetfunc(sony_nc_acpi_handle, "GBRT", &value))
                 return 0;
         /* brightness levels are 1-based, while backlight ones are 0-based */
         return value - 1;
@@ -408,9 +693,9 @@ static struct backlight_ops sony_backlight_ops = {
  */
 static void sony_acpi_notify(acpi_handle handle, u32 event, void *data)
 {
-        if (debug)
-                printk(LOG_PFX "sony_acpi_notify, event: %d\n", event);
-        acpi_bus_generate_event(sony_acpi_acpi_device, 1, event);
+        dprintk("sony_acpi_notify, event: %d\n", event);
+        sony_laptop_report_input_event(event);
+        acpi_bus_generate_event(sony_nc_acpi_device, 1, event);
 }
 
 static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
@@ -422,7 +707,7 @@ static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
         node = (struct acpi_namespace_node *)handle;
         operand = (union acpi_operand_object *)node->object;
 
-        printk(LOG_PFX "method: name: %4.4s, args %X\n", node->name.ascii,
+        printk(KERN_WARNING DRV_PFX "method: name: %4.4s, args %X\n", node->name.ascii,
                (u32) operand->method.param_count);
 
         return AE_OK;
@@ -431,16 +716,16 @@ static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
 /*
  * ACPI device
  */
-static int sony_acpi_resume(struct acpi_device *device)
+static int sony_nc_resume(struct acpi_device *device)
 {
-        struct sony_acpi_value *item;
+        struct sony_nc_value *item;
 
-        for (item = sony_acpi_values; item->name; item++) {
+        for (item = sony_nc_values; item->name; item++) {
                 int ret;
 
                 if (!item->valid)
                         continue;
-                ret = acpi_callsetfunc(sony_acpi_handle, *item->acpiset,
+                ret = acpi_callsetfunc(sony_nc_acpi_handle, *item->acpiset,
                                        item->value, NULL);
                 if (ret < 0) {
                         printk("%s: %d\n", __FUNCTION__, ret);
@@ -450,42 +735,55 @@ static int sony_acpi_resume(struct acpi_device *device)
         return 0;
 }
 
-static int sony_acpi_add(struct acpi_device *device)
+static int sony_nc_add(struct acpi_device *device)
 {
         acpi_status status;
         int result = 0;
         acpi_handle handle;
+        struct sony_nc_value *item;
+
+        printk(KERN_INFO DRV_PFX "%s v%s.\n",
+                SONY_NC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
 
-        sony_acpi_acpi_device = device;
+        sony_nc_acpi_device = device;
+        strcpy(acpi_device_class(device), "sony/hotkey");
 
-        sony_acpi_handle = device->handle;
+        sony_nc_acpi_handle = device->handle;
 
         if (debug) {
-                status = acpi_walk_namespace(ACPI_TYPE_METHOD, sony_acpi_handle,
+                status = acpi_walk_namespace(ACPI_TYPE_METHOD, sony_nc_acpi_handle,
                                              1, sony_walk_callback, NULL, NULL);
                 if (ACPI_FAILURE(status)) {
-                        printk(LOG_PFX "unable to walk acpi resources\n");
+                        printk(KERN_WARNING DRV_PFX "unable to walk acpi resources\n");
                         result = -ENODEV;
                         goto outwalk;
                 }
         }
 
-        status = acpi_install_notify_handler(sony_acpi_handle,
+        /* setup input devices and helper fifo */
+        result = sony_laptop_setup_input();
+        if (result) {
+                printk(KERN_ERR DRV_PFX
+                                "Unabe to create input devices.\n");
+                goto outwalk;
+        }
+
+        status = acpi_install_notify_handler(sony_nc_acpi_handle,
                                              ACPI_DEVICE_NOTIFY,
                                              sony_acpi_notify, NULL);
         if (ACPI_FAILURE(status)) {
-                printk(LOG_PFX "unable to install notify handler\n");
+                printk(KERN_WARNING DRV_PFX "unable to install notify handler\n");
                 result = -ENODEV;
-                goto outwalk;
+                goto outinput;
         }
 
-        if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle, "GBRT", &handle))) {
+        if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) {
                 sony_backlight_device = backlight_device_register("sony", NULL,
                                                                   NULL,
                                                                   &sony_backlight_ops);
 
                 if (IS_ERR(sony_backlight_device)) {
-                        printk(LOG_PFX "unable to register backlight device\n");
+                        printk(KERN_WARNING DRV_PFX "unable to register backlight device\n");
                         sony_backlight_device = NULL;
                 } else {
                         sony_backlight_device->props.brightness =
@@ -497,68 +795,1497 @@ static int sony_acpi_add(struct acpi_device *device)
 
         }
 
-        if (sony_snc_pf_add())
+        result = sony_pf_add();
+        if (result)
                 goto outbacklight;
 
-        printk(KERN_INFO ACPI_SNC_DRIVER_NAME " successfully installed\n");
+        /* create sony_pf sysfs attributes related to the SNC device */
+        for (item = sony_nc_values; item->name; ++item) {
+
+                if (!debug && item->debug)
+                        continue;
+
+                /* find the available acpiget as described in the DSDT */
+                for (; item->acpiget && *item->acpiget; ++item->acpiget) {
+                        if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle,
+                                                         *item->acpiget,
+                                                         &handle))) {
+                                dprintk("Found %s getter: %s\n",
+                                                item->name, *item->acpiget);
+                                item->devattr.attr.mode |= S_IRUGO;
+                                break;
+                        }
+                }
+
+                /* find the available acpiset as described in the DSDT */
+                for (; item->acpiset && *item->acpiset; ++item->acpiset) {
+                        if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle,
+                                                         *item->acpiset,
+                                                         &handle))) {
+                                dprintk("Found %s setter: %s\n",
+                                                item->name, *item->acpiset);
+                                item->devattr.attr.mode |= S_IWUSR;
+                                break;
+                        }
+                }
+
+                if (item->devattr.attr.mode != 0) {
+                        result =
+                            device_create_file(&sony_pf_device->dev,
+                                               &item->devattr);
+                        if (result)
+                                goto out_sysfs;
+                }
+        }
 
         return 0;
 
+      out_sysfs:
+        for (item = sony_nc_values; item->name; ++item) {
+                device_remove_file(&sony_pf_device->dev, &item->devattr);
+        }
+        sony_pf_remove();
+
       outbacklight:
         if (sony_backlight_device)
                 backlight_device_unregister(sony_backlight_device);
 
-        status = acpi_remove_notify_handler(sony_acpi_handle,
+        status = acpi_remove_notify_handler(sony_nc_acpi_handle,
                                             ACPI_DEVICE_NOTIFY,
                                             sony_acpi_notify);
         if (ACPI_FAILURE(status))
-                printk(LOG_PFX "unable to remove notify handler\n");
+                printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
+
+      outinput:
+        sony_laptop_remove_input();
+
       outwalk:
         return result;
 }
 
-static int sony_acpi_remove(struct acpi_device *device, int type)
+static int sony_nc_remove(struct acpi_device *device, int type)
 {
         acpi_status status;
+        struct sony_nc_value *item;
 
         if (sony_backlight_device)
                 backlight_device_unregister(sony_backlight_device);
 
-        sony_acpi_acpi_device = NULL;
+        sony_nc_acpi_device = NULL;
 
-        status = acpi_remove_notify_handler(sony_acpi_handle,
+        status = acpi_remove_notify_handler(sony_nc_acpi_handle,
                                             ACPI_DEVICE_NOTIFY,
                                             sony_acpi_notify);
         if (ACPI_FAILURE(status))
-                printk(LOG_PFX "unable to remove notify handler\n");
+                printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
 
-        sony_snc_pf_remove();
+        for (item = sony_nc_values; item->name; ++item) {
+                device_remove_file(&sony_pf_device->dev, &item->devattr);
+        }
 
-        printk(KERN_INFO ACPI_SNC_DRIVER_NAME " successfully removed\n");
+        sony_pf_remove();
+        sony_laptop_remove_input();
+        dprintk(SONY_NC_DRIVER_NAME " removed.\n");
 
         return 0;
 }
 
-static struct acpi_driver sony_acpi_driver = {
-        .name = ACPI_SNC_DRIVER_NAME,
-        .class = ACPI_SNC_CLASS,
-        .ids = ACPI_SNC_HID,
+static struct acpi_driver sony_nc_driver = {
+        .name = SONY_NC_DRIVER_NAME,
+        .class = SONY_NC_CLASS,
+        .ids = SONY_NC_HID,
+        .owner = THIS_MODULE,
         .ops = {
-                .add = sony_acpi_add,
-                .remove = sony_acpi_remove,
-                .resume = sony_acpi_resume,
+                .add = sony_nc_add,
+                .remove = sony_nc_remove,
+                .resume = sony_nc_resume,
                 },
 };
 
-static int __init sony_acpi_init(void)
+/*********** SPIC (SNY6001) Device ***********/
+
+#define SONYPI_DEVICE_TYPE1     0x00000001
+#define SONYPI_DEVICE_TYPE2     0x00000002
+#define SONYPI_DEVICE_TYPE3     0x00000004
+
+#define SONY_PIC_EV_MASK        0xff
+
+struct sony_pic_ioport {
+        struct acpi_resource_io io;
+        struct list_head        list;
+};
+
+struct sony_pic_irq {
+        struct acpi_resource_irq        irq;
+        struct list_head                list;
+};
+
+struct sony_pic_dev {
+        int                     model;
+        u8                      camera_power;
+        u8                      bluetooth_power;
+        u8                      wwan_power;
+        struct acpi_device      *acpi_dev;
+        struct sony_pic_irq     *cur_irq;
+        struct sony_pic_ioport  *cur_ioport;
+        struct list_head        interrupts;
+        struct list_head        ioports;
+        struct mutex            lock;
+};
+
+static struct sony_pic_dev spic_dev = {
+        .interrupts     = LIST_HEAD_INIT(spic_dev.interrupts),
+        .ioports        = LIST_HEAD_INIT(spic_dev.ioports),
+};
+
+/* Event masks */
+#define SONYPI_JOGGER_MASK                      0x00000001
+#define SONYPI_CAPTURE_MASK                     0x00000002
+#define SONYPI_FNKEY_MASK                       0x00000004
+#define SONYPI_BLUETOOTH_MASK                   0x00000008
+#define SONYPI_PKEY_MASK                        0x00000010
+#define SONYPI_BACK_MASK                        0x00000020
+#define SONYPI_HELP_MASK                        0x00000040
+#define SONYPI_LID_MASK                         0x00000080
+#define SONYPI_ZOOM_MASK                        0x00000100
+#define SONYPI_THUMBPHRASE_MASK                 0x00000200
+#define SONYPI_MEYE_MASK                        0x00000400
+#define SONYPI_MEMORYSTICK_MASK                 0x00000800
+#define SONYPI_BATTERY_MASK                     0x00001000
+#define SONYPI_WIRELESS_MASK                    0x00002000
+
+struct sonypi_event {
+        u8      data;
+        u8      event;
+};
+
+/* The set of possible button release events */
+static struct sonypi_event sonypi_releaseev[] = {
+        { 0x00, SONYPI_EVENT_ANYBUTTON_RELEASED },
+        { 0, 0 }
+};
+
+/* The set of possible jogger events  */
+static struct sonypi_event sonypi_joggerev[] = {
+        { 0x1f, SONYPI_EVENT_JOGDIAL_UP },
+        { 0x01, SONYPI_EVENT_JOGDIAL_DOWN },
+        { 0x5f, SONYPI_EVENT_JOGDIAL_UP_PRESSED },
+        { 0x41, SONYPI_EVENT_JOGDIAL_DOWN_PRESSED },
+        { 0x1e, SONYPI_EVENT_JOGDIAL_FAST_UP },
+        { 0x02, SONYPI_EVENT_JOGDIAL_FAST_DOWN },
+        { 0x5e, SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED },
+        { 0x42, SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED },
+        { 0x1d, SONYPI_EVENT_JOGDIAL_VFAST_UP },
+        { 0x03, SONYPI_EVENT_JOGDIAL_VFAST_DOWN },
+        { 0x5d, SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED },
+        { 0x43, SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED },
+        { 0x40, SONYPI_EVENT_JOGDIAL_PRESSED },
+        { 0, 0 }
+};
+
+/* The set of possible capture button events */
+static struct sonypi_event sonypi_captureev[] = {
+        { 0x05, SONYPI_EVENT_CAPTURE_PARTIALPRESSED },
+        { 0x07, SONYPI_EVENT_CAPTURE_PRESSED },
+        { 0x01, SONYPI_EVENT_CAPTURE_PARTIALRELEASED },
+        { 0, 0 }
+};
+
+/* The set of possible fnkeys events */
+static struct sonypi_event sonypi_fnkeyev[] = {
+        { 0x10, SONYPI_EVENT_FNKEY_ESC },
+        { 0x11, SONYPI_EVENT_FNKEY_F1 },
+        { 0x12, SONYPI_EVENT_FNKEY_F2 },
+        { 0x13, SONYPI_EVENT_FNKEY_F3 },
+        { 0x14, SONYPI_EVENT_FNKEY_F4 },
+        { 0x15, SONYPI_EVENT_FNKEY_F5 },
+        { 0x16, SONYPI_EVENT_FNKEY_F6 },
+        { 0x17, SONYPI_EVENT_FNKEY_F7 },
+        { 0x18, SONYPI_EVENT_FNKEY_F8 },
+        { 0x19, SONYPI_EVENT_FNKEY_F9 },
+        { 0x1a, SONYPI_EVENT_FNKEY_F10 },
+        { 0x1b, SONYPI_EVENT_FNKEY_F11 },
+        { 0x1c, SONYPI_EVENT_FNKEY_F12 },
+        { 0x1f, SONYPI_EVENT_FNKEY_RELEASED },
+        { 0x21, SONYPI_EVENT_FNKEY_1 },
+        { 0x22, SONYPI_EVENT_FNKEY_2 },
+        { 0x31, SONYPI_EVENT_FNKEY_D },
+        { 0x32, SONYPI_EVENT_FNKEY_E },
+        { 0x33, SONYPI_EVENT_FNKEY_F },
+        { 0x34, SONYPI_EVENT_FNKEY_S },
+        { 0x35, SONYPI_EVENT_FNKEY_B },
+        { 0x36, SONYPI_EVENT_FNKEY_ONLY },
+        { 0, 0 }
+};
+
+/* The set of possible program key events */
+static struct sonypi_event sonypi_pkeyev[] = {
+        { 0x01, SONYPI_EVENT_PKEY_P1 },
+        { 0x02, SONYPI_EVENT_PKEY_P2 },
+        { 0x04, SONYPI_EVENT_PKEY_P3 },
+        { 0x5c, SONYPI_EVENT_PKEY_P1 },
+        { 0, 0 }
+};
+
+/* The set of possible bluetooth events */
+static struct sonypi_event sonypi_blueev[] = {
+        { 0x55, SONYPI_EVENT_BLUETOOTH_PRESSED },
+        { 0x59, SONYPI_EVENT_BLUETOOTH_ON },
+        { 0x5a, SONYPI_EVENT_BLUETOOTH_OFF },
+        { 0, 0 }
+};
+
+/* The set of possible wireless events */
+static struct sonypi_event sonypi_wlessev[] = {
+        { 0x59, SONYPI_EVENT_WIRELESS_ON },
+        { 0x5a, SONYPI_EVENT_WIRELESS_OFF },
+        { 0, 0 }
+};
+
+/* The set of possible back button events */
+static struct sonypi_event sonypi_backev[] = {
+        { 0x20, SONYPI_EVENT_BACK_PRESSED },
+        { 0, 0 }
+};
+
+/* The set of possible help button events */
+static struct sonypi_event sonypi_helpev[] = {
+        { 0x3b, SONYPI_EVENT_HELP_PRESSED },
+        { 0, 0 }
+};
+
+
+/* The set of possible lid events */
+static struct sonypi_event sonypi_lidev[] = {
+        { 0x51, SONYPI_EVENT_LID_CLOSED },
+        { 0x50, SONYPI_EVENT_LID_OPENED },
+        { 0, 0 }
+};
+
+/* The set of possible zoom events */
+static struct sonypi_event sonypi_zoomev[] = {
+        { 0x39, SONYPI_EVENT_ZOOM_PRESSED },
+        { 0, 0 }
+};
+
+/* The set of possible thumbphrase events */
+static struct sonypi_event sonypi_thumbphraseev[] = {
+        { 0x3a, SONYPI_EVENT_THUMBPHRASE_PRESSED },
+        { 0, 0 }
+};
+
+/* The set of possible motioneye camera events */
+static struct sonypi_event sonypi_meyeev[] = {
+        { 0x00, SONYPI_EVENT_MEYE_FACE },
+        { 0x01, SONYPI_EVENT_MEYE_OPPOSITE },
+        { 0, 0 }
+};
+
+/* The set of possible memorystick events */
+static struct sonypi_event sonypi_memorystickev[] = {
+        { 0x53, SONYPI_EVENT_MEMORYSTICK_INSERT },
+        { 0x54, SONYPI_EVENT_MEMORYSTICK_EJECT },
+        { 0, 0 }
+};
+
+/* The set of possible battery events */
+static struct sonypi_event sonypi_batteryev[] = {
+        { 0x20, SONYPI_EVENT_BATTERY_INSERT },
+        { 0x30, SONYPI_EVENT_BATTERY_REMOVE },
+        { 0, 0 }
+};
+
+static struct sonypi_eventtypes {
+        int                     model;
+        u8                      data;
+        unsigned long           mask;
+        struct sonypi_event *   events;
+} sony_pic_eventtypes[] = {
+        { SONYPI_DEVICE_TYPE1, 0, 0xffffffff, sonypi_releaseev },
+        { SONYPI_DEVICE_TYPE1, 0x70, SONYPI_MEYE_MASK, sonypi_meyeev },
+        { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_LID_MASK, sonypi_lidev },
+        { SONYPI_DEVICE_TYPE1, 0x60, SONYPI_CAPTURE_MASK, sonypi_captureev },
+        { SONYPI_DEVICE_TYPE1, 0x10, SONYPI_JOGGER_MASK, sonypi_joggerev },
+        { SONYPI_DEVICE_TYPE1, 0x20, SONYPI_FNKEY_MASK, sonypi_fnkeyev },
+        { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_BLUETOOTH_MASK, sonypi_blueev },
+        { SONYPI_DEVICE_TYPE1, 0x40, SONYPI_PKEY_MASK, sonypi_pkeyev },
+        { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
+        { SONYPI_DEVICE_TYPE1, 0x40, SONYPI_BATTERY_MASK, sonypi_batteryev },
+
+        { SONYPI_DEVICE_TYPE2, 0, 0xffffffff, sonypi_releaseev },
+        { SONYPI_DEVICE_TYPE2, 0x38, SONYPI_LID_MASK, sonypi_lidev },
+        { SONYPI_DEVICE_TYPE2, 0x11, SONYPI_JOGGER_MASK, sonypi_joggerev },
+        { SONYPI_DEVICE_TYPE2, 0x61, SONYPI_CAPTURE_MASK, sonypi_captureev },
+        { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev },
+        { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_BLUETOOTH_MASK, sonypi_blueev },
+        { SONYPI_DEVICE_TYPE2, 0x08, SONYPI_PKEY_MASK, sonypi_pkeyev },
+        { SONYPI_DEVICE_TYPE2, 0x11, SONYPI_BACK_MASK, sonypi_backev },
+        { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_HELP_MASK, sonypi_helpev },
+        { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_ZOOM_MASK, sonypi_zoomev },
+        { SONYPI_DEVICE_TYPE2, 0x20, SONYPI_THUMBPHRASE_MASK, sonypi_thumbphraseev },
+        { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
+        { SONYPI_DEVICE_TYPE2, 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev },
+        { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev },
+
+        { SONYPI_DEVICE_TYPE3, 0, 0xffffffff, sonypi_releaseev },
+        { SONYPI_DEVICE_TYPE3, 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev },
+        { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_WIRELESS_MASK, sonypi_wlessev },
+        { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev },
+        { SONYPI_DEVICE_TYPE3, 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev },
+        { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev },
+        { 0 }
+};
+
+static int sony_pic_detect_device_type(void)
+{
+        struct pci_dev *pcidev;
+        int model = 0;
+
+        if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+                                     PCI_DEVICE_ID_INTEL_82371AB_3, NULL)))
+                model = SONYPI_DEVICE_TYPE1;
+
+        else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+                                          PCI_DEVICE_ID_INTEL_ICH6_1, NULL)))
+                model = SONYPI_DEVICE_TYPE3;
+
+        else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+                                          PCI_DEVICE_ID_INTEL_ICH7_1, NULL)))
+                model = SONYPI_DEVICE_TYPE3;
+
+        else
+                model = SONYPI_DEVICE_TYPE2;
+
+        if (pcidev)
+                pci_dev_put(pcidev);
+
+        printk(KERN_INFO DRV_PFX "detected Type%d model\n",
+                        model == SONYPI_DEVICE_TYPE1 ? 1 :
+                        model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
+        return model;
+}
+
+#define ITERATIONS_LONG         10000
+#define ITERATIONS_SHORT        10
+#define wait_on_command(command, iterations) {                          \
+        unsigned int n = iterations;                                    \
+        while (--n && (command))                                        \
+                udelay(1);                                              \
+        if (!n)                                                         \
+                dprintk("command failed at %s : %s (line %d)\n",        \
+                                __FILE__, __FUNCTION__, __LINE__);      \
+}
+
+static u8 sony_pic_call1(u8 dev)
+{
+        u8 v1, v2;
+
+        wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+                        ITERATIONS_LONG);
+        outb(dev, spic_dev.cur_ioport->io.minimum + 4);
+        v1 = inb_p(spic_dev.cur_ioport->io.minimum + 4);
+        v2 = inb_p(spic_dev.cur_ioport->io.minimum);
+        dprintk("sony_pic_call1: 0x%.4x\n", (v2 << 8) | v1);
+        return v2;
+}
+
+static u8 sony_pic_call2(u8 dev, u8 fn)
+{
+        u8 v1;
+
+        wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+                        ITERATIONS_LONG);
+        outb(dev, spic_dev.cur_ioport->io.minimum + 4);
+        wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2,
+                        ITERATIONS_LONG);
+        outb(fn, spic_dev.cur_ioport->io.minimum);
+        v1 = inb_p(spic_dev.cur_ioport->io.minimum);
+        dprintk("sony_pic_call2: 0x%.4x\n", v1);
+        return v1;
+}
+
+static u8 sony_pic_call3(u8 dev, u8 fn, u8 v)
+{
+        u8 v1;
+
+        wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
+        outb(dev, spic_dev.cur_ioport->io.minimum + 4);
+        wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
+        outb(fn, spic_dev.cur_ioport->io.minimum);
+        wait_on_command(inb_p(spic_dev.cur_ioport->io.minimum + 4) & 2, ITERATIONS_LONG);
+        outb(v, spic_dev.cur_ioport->io.minimum);
+        v1 = inb_p(spic_dev.cur_ioport->io.minimum);
+        dprintk("sony_pic_call3: 0x%.4x\n", v1);
+        return v1;
+}
+
+/* camera tests and poweron/poweroff */
+#define SONYPI_CAMERA_PICTURE           5
+#define SONYPI_CAMERA_CONTROL           0x10
+
+#define SONYPI_CAMERA_BRIGHTNESS                0
+#define SONYPI_CAMERA_CONTRAST                  1
+#define SONYPI_CAMERA_HUE                       2
+#define SONYPI_CAMERA_COLOR                     3
+#define SONYPI_CAMERA_SHARPNESS                 4
+
+#define SONYPI_CAMERA_EXPOSURE_MASK             0xC
+#define SONYPI_CAMERA_WHITE_BALANCE_MASK        0x3
+#define SONYPI_CAMERA_PICTURE_MODE_MASK         0x30
+#define SONYPI_CAMERA_MUTE_MASK                 0x40
+
+/* the rest don't need a loop until not 0xff */
+#define SONYPI_CAMERA_AGC                       6
+#define SONYPI_CAMERA_AGC_MASK                  0x30
+#define SONYPI_CAMERA_SHUTTER_MASK              0x7
+
+#define SONYPI_CAMERA_SHUTDOWN_REQUEST          7
+#define SONYPI_CAMERA_CONTROL                   0x10
+
+#define SONYPI_CAMERA_STATUS                    7
+#define SONYPI_CAMERA_STATUS_READY              0x2
+#define SONYPI_CAMERA_STATUS_POSITION           0x4
+
+#define SONYPI_DIRECTION_BACKWARDS              0x4
+
+#define SONYPI_CAMERA_REVISION                  8
+#define SONYPI_CAMERA_ROMVERSION                9
+
+static int __sony_pic_camera_ready(void)
+{
+        u8 v;
+
+        v = sony_pic_call2(0x8f, SONYPI_CAMERA_STATUS);
+        return (v != 0xff && (v & SONYPI_CAMERA_STATUS_READY));
+}
+
+static int __sony_pic_camera_off(void)
+{
+        if (!camera) {
+                printk(KERN_WARNING DRV_PFX "camera control not enabled\n");
+                return -ENODEV;
+        }
+
+        wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_PICTURE,
+                                SONYPI_CAMERA_MUTE_MASK),
+                        ITERATIONS_SHORT);
+
+        if (spic_dev.camera_power) {
+                sony_pic_call2(0x91, 0);
+                spic_dev.camera_power = 0;
+        }
+        return 0;
+}
+
+static int __sony_pic_camera_on(void)
 {
-        return acpi_bus_register_driver(&sony_acpi_driver);
+        int i, j, x;
+
+        if (!camera) {
+                printk(KERN_WARNING DRV_PFX "camera control not enabled\n");
+                return -ENODEV;
+        }
+
+        if (spic_dev.camera_power)
+                return 0;
+
+        for (j = 5; j > 0; j--) {
+
+                for (x = 0; x < 100 && sony_pic_call2(0x91, 0x1); x++)
+                        msleep(10);
+                sony_pic_call1(0x93);
+
+                for (i = 400; i > 0; i--) {
+                        if (__sony_pic_camera_ready())
+                                break;
+                        msleep(10);
+                }
+                if (i)
+                        break;
+        }
+
+        if (j == 0) {
+                printk(KERN_WARNING DRV_PFX "failed to power on camera\n");
+                return -ENODEV;
+        }
+
+        wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_CONTROL,
+                                0x5a),
+                        ITERATIONS_SHORT);
+
+        spic_dev.camera_power = 1;
+        return 0;
+}
+
+/* External camera command (exported to the motion eye v4l driver) */
+int sony_pic_camera_command(int command, u8 value)
+{
+        if (!camera)
+                return -EIO;
+
+        mutex_lock(&spic_dev.lock);
+
+        switch (command) {
+        case SONY_PIC_COMMAND_SETCAMERA:
+                if (value)
+                        __sony_pic_camera_on();
+                else
+                        __sony_pic_camera_off();
+                break;
+        case SONY_PIC_COMMAND_SETCAMERABRIGHTNESS:
+                wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_BRIGHTNESS, value),
+                                ITERATIONS_SHORT);
+                break;
+        case SONY_PIC_COMMAND_SETCAMERACONTRAST:
+                wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_CONTRAST, value),
+                                ITERATIONS_SHORT);
+                break;
+        case SONY_PIC_COMMAND_SETCAMERAHUE:
+                wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_HUE, value),
+                                ITERATIONS_SHORT);
+                break;
+        case SONY_PIC_COMMAND_SETCAMERACOLOR:
+                wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_COLOR, value),
+                                ITERATIONS_SHORT);
+                break;
+        case SONY_PIC_COMMAND_SETCAMERASHARPNESS:
+                wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_SHARPNESS, value),
+                                ITERATIONS_SHORT);
+                break;
+        case SONY_PIC_COMMAND_SETCAMERAPICTURE:
+                wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_PICTURE, value),
+                                ITERATIONS_SHORT);
+                break;
+        case SONY_PIC_COMMAND_SETCAMERAAGC:
+                wait_on_command(sony_pic_call3(0x90, SONYPI_CAMERA_AGC, value),
+                                ITERATIONS_SHORT);
+                break;
+        default:
+                printk(KERN_ERR DRV_PFX "sony_pic_camera_command invalid: %d\n",
+                       command);
+                break;
+        }
+        mutex_unlock(&spic_dev.lock);
+        return 0;
+}
+EXPORT_SYMBOL(sony_pic_camera_command);
+
+/* gprs/edge modem (SZ460N and SZ210P), thanks to Joshua Wise */
+static void sony_pic_set_wwanpower(u8 state)
+{
+        state = !!state;
+        mutex_lock(&spic_dev.lock);
+        if (spic_dev.wwan_power == state) {
+                mutex_unlock(&spic_dev.lock);
+                return;
+        }
+        sony_pic_call2(0xB0, state);
+        spic_dev.wwan_power = state;
+        mutex_unlock(&spic_dev.lock);
+}
+
+static ssize_t sony_pic_wwanpower_store(struct device *dev,
+                struct device_attribute *attr,
+                const char *buffer, size_t count)
+{
+        unsigned long value;
+        if (count > 31)
+                return -EINVAL;
+
+        value = simple_strtoul(buffer, NULL, 10);
+        sony_pic_set_wwanpower(value);
+
+        return count;
+}
+
+static ssize_t sony_pic_wwanpower_show(struct device *dev,
+                struct device_attribute *attr, char *buffer)
+{
+        ssize_t count;
+        mutex_lock(&spic_dev.lock);
+        count = snprintf(buffer, PAGE_SIZE, "%d\n", spic_dev.wwan_power);
+        mutex_unlock(&spic_dev.lock);
+        return count;
+}
+
+/* bluetooth subsystem power state */
+static void __sony_pic_set_bluetoothpower(u8 state)
+{
+        state = !!state;
+        if (spic_dev.bluetooth_power == state)
+                return;
+        sony_pic_call2(0x96, state);
+        sony_pic_call1(0x82);
+        spic_dev.bluetooth_power = state;
+}
+
+static ssize_t sony_pic_bluetoothpower_store(struct device *dev,
+                struct device_attribute *attr,
+                const char *buffer, size_t count)
+{
+        unsigned long value;
+        if (count > 31)
+                return -EINVAL;
+
+        value = simple_strtoul(buffer, NULL, 10);
+        mutex_lock(&spic_dev.lock);
+        __sony_pic_set_bluetoothpower(value);
+        mutex_unlock(&spic_dev.lock);
+
+        return count;
+}
+
+static ssize_t sony_pic_bluetoothpower_show(struct device *dev,
+                struct device_attribute *attr, char *buffer)
+{
+        ssize_t count = 0;
+        mutex_lock(&spic_dev.lock);
+        count = snprintf(buffer, PAGE_SIZE, "%d\n", spic_dev.bluetooth_power);
+        mutex_unlock(&spic_dev.lock);
+        return count;
+}
+
+/* fan speed */
+/* FAN0 information (reverse engineered from ACPI tables) */
+#define SONY_PIC_FAN0_STATUS    0x93
+static int sony_pic_set_fanspeed(unsigned long value)
+{
+        return ec_write(SONY_PIC_FAN0_STATUS, value);
+}
+
+static int sony_pic_get_fanspeed(u8 *value)
+{
+        return ec_read(SONY_PIC_FAN0_STATUS, value);
+}
+
+static ssize_t sony_pic_fanspeed_store(struct device *dev,
+                struct device_attribute *attr,
+                const char *buffer, size_t count)
+{
+        unsigned long value;
+        if (count > 31)
+                return -EINVAL;
+
+        value = simple_strtoul(buffer, NULL, 10);
+        if (sony_pic_set_fanspeed(value))
+                return -EIO;
+
+        return count;
+}
+
+static ssize_t sony_pic_fanspeed_show(struct device *dev,
+                struct device_attribute *attr, char *buffer)
+{
+        u8 value = 0;
+        if (sony_pic_get_fanspeed(&value))
+                return -EIO;
+
+        return snprintf(buffer, PAGE_SIZE, "%d\n", value);
+}
+
+#define SPIC_ATTR(_name, _mode)                                 \
+struct device_attribute spic_attr_##_name = __ATTR(_name,       \
+                _mode, sony_pic_## _name ##_show,               \
+                sony_pic_## _name ##_store)
+
+static SPIC_ATTR(bluetoothpower, 0644);
+static SPIC_ATTR(wwanpower, 0644);
+static SPIC_ATTR(fanspeed, 0644);
+
+static struct attribute *spic_attributes[] = {
+        &spic_attr_bluetoothpower.attr,
+        &spic_attr_wwanpower.attr,
+        &spic_attr_fanspeed.attr,
+        NULL
+};
+
+static struct attribute_group spic_attribute_group = {
+        .attrs = spic_attributes
+};
+
+/******** SONYPI compatibility **********/
+#ifdef CONFIG_SONY_LAPTOP_OLD
+
+/* battery / brightness / temperature  addresses */
+#define SONYPI_BAT_FLAGS        0x81
+#define SONYPI_LCD_LIGHT        0x96
+#define SONYPI_BAT1_PCTRM       0xa0
+#define SONYPI_BAT1_LEFT        0xa2
+#define SONYPI_BAT1_MAXRT       0xa4
+#define SONYPI_BAT2_PCTRM       0xa8
+#define SONYPI_BAT2_LEFT        0xaa
+#define SONYPI_BAT2_MAXRT       0xac
+#define SONYPI_BAT1_MAXTK       0xb0
+#define SONYPI_BAT1_FULL        0xb2
+#define SONYPI_BAT2_MAXTK       0xb8
+#define SONYPI_BAT2_FULL        0xba
+#define SONYPI_TEMP_STATUS      0xC1
+
+struct sonypi_compat_s {
+        struct fasync_struct    *fifo_async;
+        struct kfifo            *fifo;
+        spinlock_t              fifo_lock;
+        wait_queue_head_t       fifo_proc_list;
+        atomic_t                open_count;
+};
+static struct sonypi_compat_s sonypi_compat = {
+        .open_count = ATOMIC_INIT(0),
+};
+
+static int sonypi_misc_fasync(int fd, struct file *filp, int on)
+{
+        int retval;
+
+        retval = fasync_helper(fd, filp, on, &sonypi_compat.fifo_async);
+        if (retval < 0)
+                return retval;
+        return 0;
+}
+
+static int sonypi_misc_release(struct inode *inode, struct file *file)
+{
+        sonypi_misc_fasync(-1, file, 0);
+        atomic_dec(&sonypi_compat.open_count);
+        return 0;
+}
+
+static int sonypi_misc_open(struct inode *inode, struct file *file)
+{
+        /* Flush input queue on first open */
+        if (atomic_inc_return(&sonypi_compat.open_count) == 1)
+                kfifo_reset(sonypi_compat.fifo);
+        return 0;
+}
+
+static ssize_t sonypi_misc_read(struct file *file, char __user *buf,
+                                size_t count, loff_t *pos)
+{
+        ssize_t ret;
+        unsigned char c;
+
+        if ((kfifo_len(sonypi_compat.fifo) == 0) &&
+            (file->f_flags & O_NONBLOCK))
+                return -EAGAIN;
+
+        ret = wait_event_interruptible(sonypi_compat.fifo_proc_list,
+                                       kfifo_len(sonypi_compat.fifo) != 0);
+        if (ret)
+                return ret;
+
+        while (ret < count &&
+               (kfifo_get(sonypi_compat.fifo, &c, sizeof(c)) == sizeof(c))) {
+                if (put_user(c, buf++))
+                        return -EFAULT;
+                ret++;
+        }
+
+        if (ret > 0) {
+                struct inode *inode = file->f_path.dentry->d_inode;
+                inode->i_atime = current_fs_time(inode->i_sb);
+        }
+
+        return ret;
+}
+
+static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait)
+{
+        poll_wait(file, &sonypi_compat.fifo_proc_list, wait);
+        if (kfifo_len(sonypi_compat.fifo))
+                return POLLIN | POLLRDNORM;
+        return 0;
+}
+
+static int ec_read16(u8 addr, u16 *value)
+{
+        u8 val_lb, val_hb;
+        if (ec_read(addr, &val_lb))
+                return -1;
+        if (ec_read(addr + 1, &val_hb))
+                return -1;
+        *value = val_lb | (val_hb << 8);
+        return 0;
+}
+
+static int sonypi_misc_ioctl(struct inode *ip, struct file *fp,
+                             unsigned int cmd, unsigned long arg)
+{
+        int ret = 0;
+        void __user *argp = (void __user *)arg;
+        u8 val8;
+        u16 val16;
+        int value;
+
+        mutex_lock(&spic_dev.lock);
+        switch (cmd) {
+        case SONYPI_IOCGBRT:
+                if (sony_backlight_device == NULL) {
+                        ret = -EIO;
+                        break;
+                }
+                if (acpi_callgetfunc(sony_nc_acpi_handle, "GBRT", &value)) {
+                        ret = -EIO;
+                        break;
+                }
+                val8 = ((value & 0xff) - 1) << 5;
+                if (copy_to_user(argp, &val8, sizeof(val8)))
+                                ret = -EFAULT;
+                break;
+        case SONYPI_IOCSBRT:
+                if (sony_backlight_device == NULL) {
+                        ret = -EIO;
+                        break;
+                }
+                if (copy_from_user(&val8, argp, sizeof(val8))) {
+                        ret = -EFAULT;
+                        break;
+                }
+                if (acpi_callsetfunc(sony_nc_acpi_handle, "SBRT",
+                                (val8 >> 5) + 1, NULL)) {
+                        ret = -EIO;
+                        break;
+                }
+                /* sync the backlight device status */
+                sony_backlight_device->props.brightness =
+                    sony_backlight_get_brightness(sony_backlight_device);
+                break;
+        case SONYPI_IOCGBAT1CAP:
+                if (ec_read16(SONYPI_BAT1_FULL, &val16)) {
+                        ret = -EIO;
+                        break;
+                }
+                if (copy_to_user(argp, &val16, sizeof(val16)))
+                        ret = -EFAULT;
+                break;
+        case SONYPI_IOCGBAT1REM:
+                if (ec_read16(SONYPI_BAT1_LEFT, &val16)) {
+                        ret = -EIO;
+                        break;
+                }
+                if (copy_to_user(argp, &val16, sizeof(val16)))
+                        ret = -EFAULT;
+                break;
+        case SONYPI_IOCGBAT2CAP:
+                if (ec_read16(SONYPI_BAT2_FULL, &val16)) {
+                        ret = -EIO;
+                        break;
+                }
+                if (copy_to_user(argp, &val16, sizeof(val16)))
+                        ret = -EFAULT;
+                break;
+        case SONYPI_IOCGBAT2REM:
+                if (ec_read16(SONYPI_BAT2_LEFT, &val16)) {
+                        ret = -EIO;
+                        break;
+                }
+                if (copy_to_user(argp, &val16, sizeof(val16)))
+                        ret = -EFAULT;
+                break;
+        case SONYPI_IOCGBATFLAGS:
+                if (ec_read(SONYPI_BAT_FLAGS, &val8)) {
+                        ret = -EIO;
+                        break;
+                }
+                val8 &= 0x07;
+                if (copy_to_user(argp, &val8, sizeof(val8)))
+                        ret = -EFAULT;
+                break;
+        case SONYPI_IOCGBLUE:
+                val8 = spic_dev.bluetooth_power;
+                if (copy_to_user(argp, &val8, sizeof(val8)))
+                        ret = -EFAULT;
+                break;
+        case SONYPI_IOCSBLUE:
+                if (copy_from_user(&val8, argp, sizeof(val8))) {
+                        ret = -EFAULT;
+                        break;
+                }
+                __sony_pic_set_bluetoothpower(val8);
+                break;
+        /* FAN Controls */
+        case SONYPI_IOCGFAN:
+                if (sony_pic_get_fanspeed(&val8)) {
+                        ret = -EIO;
+                        break;
+                }
+                if (copy_to_user(argp, &val8, sizeof(val8)))
+                        ret = -EFAULT;
+                break;
+        case SONYPI_IOCSFAN:
+                if (copy_from_user(&val8, argp, sizeof(val8))) {
+                        ret = -EFAULT;
+                        break;
+                }
+                if (sony_pic_set_fanspeed(val8))
+                        ret = -EIO;
+                break;
+        /* GET Temperature (useful under APM) */
+        case SONYPI_IOCGTEMP:
+                if (ec_read(SONYPI_TEMP_STATUS, &val8)) {
+                        ret = -EIO;
+                        break;
+                }
+                if (copy_to_user(argp, &val8, sizeof(val8)))
+                        ret = -EFAULT;
+                break;
+        default:
+                ret = -EINVAL;
+        }
+        mutex_unlock(&spic_dev.lock);
+        return ret;
+}
+
+static const struct file_operations sonypi_misc_fops = {
+        .owner          = THIS_MODULE,
+        .read           = sonypi_misc_read,
+        .poll           = sonypi_misc_poll,
+        .open           = sonypi_misc_open,
+        .release        = sonypi_misc_release,
+        .fasync         = sonypi_misc_fasync,
+        .ioctl          = sonypi_misc_ioctl,
+};
+
+static struct miscdevice sonypi_misc_device = {
+        .minor          = MISC_DYNAMIC_MINOR,
+        .name           = "sonypi",
+        .fops           = &sonypi_misc_fops,
+};
+
+static void sonypi_compat_report_event(u8 event)
+{
+        kfifo_put(sonypi_compat.fifo, (unsigned char *)&event, sizeof(event));
+        kill_fasync(&sonypi_compat.fifo_async, SIGIO, POLL_IN);
+        wake_up_interruptible(&sonypi_compat.fifo_proc_list);
+}
+
+static int sonypi_compat_init(void)
+{
+        int error;
+
+        spin_lock_init(&sonypi_compat.fifo_lock);
+        sonypi_compat.fifo = kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL,
+                                         &sonypi_compat.fifo_lock);
+        if (IS_ERR(sonypi_compat.fifo)) {
+                printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n");
+                return PTR_ERR(sonypi_compat.fifo);
+        }
+
+        init_waitqueue_head(&sonypi_compat.fifo_proc_list);
+
+        if (minor != -1)
+                sonypi_misc_device.minor = minor;
+        error = misc_register(&sonypi_misc_device);
+        if (error) {
+                printk(KERN_ERR DRV_PFX "misc_register failed\n");
+                goto err_free_kfifo;
+        }
+        if (minor == -1)
+                printk(KERN_INFO DRV_PFX "device allocated minor is %d\n",
+                       sonypi_misc_device.minor);
+
+        return 0;
+
+err_free_kfifo:
+        kfifo_free(sonypi_compat.fifo);
+        return error;
+}
+
+static void sonypi_compat_exit(void)
+{
+        misc_deregister(&sonypi_misc_device);
+        kfifo_free(sonypi_compat.fifo);
+}
+#else
+static int sonypi_compat_init(void) { return 0; }
+static void sonypi_compat_exit(void) { }
+static void sonypi_compat_report_event(u8 event) { }
+#endif /* CONFIG_SONY_LAPTOP_OLD */
+
+/*
+ * ACPI callbacks
+ */
+static acpi_status
+sony_pic_read_possible_resource(struct acpi_resource *resource, void *context)
+{
+        u32 i;
+        struct sony_pic_dev *dev = (struct sony_pic_dev *)context;
+
+        switch (resource->type) {
+        case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+        case ACPI_RESOURCE_TYPE_END_DEPENDENT:
+                return AE_OK;
+
+        case ACPI_RESOURCE_TYPE_IRQ:
+                {
+                        struct acpi_resource_irq *p = &resource->data.irq;
+                        struct sony_pic_irq *interrupt = NULL;
+                        if (!p || !p->interrupt_count) {
+                                /*
+                                 * IRQ descriptors may have no IRQ# bits set,
+                                 * particularly those those w/ _STA disabled
+                                 */
+                                dprintk("Blank IRQ resource\n");
+                                return AE_OK;
+                        }
+                        for (i = 0; i < p->interrupt_count; i++) {
+                                if (!p->interrupts[i]) {
+                                        printk(KERN_WARNING DRV_PFX
+                                                        "Invalid IRQ %d\n",
+                                                        p->interrupts[i]);
+                                        continue;
+                                }
+                                interrupt = kzalloc(sizeof(*interrupt),
+                                                GFP_KERNEL);
+                                if (!interrupt)
+                                        return AE_ERROR;
+
+                                list_add_tail(&interrupt->list, &dev->interrupts);
+                                interrupt->irq.triggering = p->triggering;
+                                interrupt->irq.polarity = p->polarity;
+                                interrupt->irq.sharable = p->sharable;
+                                interrupt->irq.interrupt_count = 1;
+                                interrupt->irq.interrupts[0] = p->interrupts[i];
+                        }
+                        return AE_OK;
+                }
+        case ACPI_RESOURCE_TYPE_IO:
+                {
+                        struct acpi_resource_io *io = &resource->data.io;
+                        struct sony_pic_ioport *ioport = NULL;
+                        if (!io) {
+                                dprintk("Blank IO resource\n");
+                                return AE_OK;
+                        }
+
+                        ioport = kzalloc(sizeof(*ioport), GFP_KERNEL);
+                        if (!ioport)
+                                return AE_ERROR;
+
+                        list_add_tail(&ioport->list, &dev->ioports);
+                        memcpy(&ioport->io, io, sizeof(*io));
+                        return AE_OK;
+                }
+        default:
+                dprintk("Resource %d isn't an IRQ nor an IO port\n",
+                                resource->type);
+
+        case ACPI_RESOURCE_TYPE_END_TAG:
+                return AE_OK;
+        }
+        return AE_CTRL_TERMINATE;
+}
+
+static int sony_pic_possible_resources(struct acpi_device *device)
+{
+        int result = 0;
+        acpi_status status = AE_OK;
+
+        if (!device)
+                return -EINVAL;
+
+        /* get device status */
+        /* see acpi_pci_link_get_current acpi_pci_link_get_possible */
+        dprintk("Evaluating _STA\n");
+        result = acpi_bus_get_status(device);
+        if (result) {
+                printk(KERN_WARNING DRV_PFX "Unable to read status\n");
+                goto end;
+        }
+
+        if (!device->status.enabled)
+                dprintk("Device disabled\n");
+        else
+                dprintk("Device enabled\n");
+
+        /*
+         * Query and parse 'method'
+         */
+        dprintk("Evaluating %s\n", METHOD_NAME__PRS);
+        status = acpi_walk_resources(device->handle, METHOD_NAME__PRS,
+                        sony_pic_read_possible_resource, &spic_dev);
+        if (ACPI_FAILURE(status)) {
+                printk(KERN_WARNING DRV_PFX
+                                "Failure evaluating %s\n",
+                                METHOD_NAME__PRS);
+                result = -ENODEV;
+        }
+end:
+        return result;
+}
+
+/*
+ *  Disable the spic device by calling its _DIS method
+ */
+static int sony_pic_disable(struct acpi_device *device)
+{
+        if (ACPI_FAILURE(acpi_evaluate_object(device->handle, "_DIS", 0, NULL)))
+                return -ENXIO;
+
+        dprintk("Device disabled\n");
+        return 0;
+}
+
+
+/*
+ *  Based on drivers/acpi/pci_link.c:acpi_pci_link_set
+ *
+ *  Call _SRS to set current resources
+ */
+static int sony_pic_enable(struct acpi_device *device,
+                struct sony_pic_ioport *ioport, struct sony_pic_irq *irq)
+{
+        acpi_status status;
+        int result = 0;
+        struct {
+                struct acpi_resource io_res;
+                struct acpi_resource irq_res;
+                struct acpi_resource end;
+        } *resource;
+        struct acpi_buffer buffer = { 0, NULL };
+
+        if (!ioport || !irq)
+                return -EINVAL;
+
+        /* init acpi_buffer */
+        resource = kzalloc(sizeof(*resource) + 1, GFP_KERNEL);
+        if (!resource)
+                return -ENOMEM;
+
+        buffer.length = sizeof(*resource) + 1;
+        buffer.pointer = resource;
+
+        /* setup io resource */
+        resource->io_res.type = ACPI_RESOURCE_TYPE_IO;
+        resource->io_res.length = sizeof(struct acpi_resource);
+        memcpy(&resource->io_res.data.io, &ioport->io,
+                        sizeof(struct acpi_resource_io));
+
+        /* setup irq resource */
+        resource->irq_res.type = ACPI_RESOURCE_TYPE_IRQ;
+        resource->irq_res.length = sizeof(struct acpi_resource);
+        memcpy(&resource->irq_res.data.irq, &irq->irq,
+                        sizeof(struct acpi_resource_irq));
+        /* we requested a shared irq */
+        resource->irq_res.data.irq.sharable = ACPI_SHARED;
+
+        resource->end.type = ACPI_RESOURCE_TYPE_END_TAG;
+
+        /* Attempt to set the resource */
+        dprintk("Evaluating _SRS\n");
+        status = acpi_set_current_resources(device->handle, &buffer);
+
+        /* check for total failure */
+        if (ACPI_FAILURE(status)) {
+                printk(KERN_ERR DRV_PFX "Error evaluating _SRS");
+                result = -ENODEV;
+                goto end;
+        }
+
+        /* Necessary device initializations calls (from sonypi) */
+        sony_pic_call1(0x82);
+        sony_pic_call2(0x81, 0xff);
+        sony_pic_call1(compat ? 0x92 : 0x82);
+
+end:
+        kfree(resource);
+        return result;
+}
+
+/*****************
+ *
+ * ISR: some event is available
+ *
+ *****************/
+static irqreturn_t sony_pic_irq(int irq, void *dev_id)
+{
+        int i, j;
+        u32 port_val = 0;
+        u8 ev = 0;
+        u8 data_mask = 0;
+        u8 device_event = 0;
+
+        struct sony_pic_dev *dev = (struct sony_pic_dev *) dev_id;
+
+        acpi_os_read_port(dev->cur_ioport->io.minimum, &port_val,
+                        dev->cur_ioport->io.address_length);
+        ev = port_val & SONY_PIC_EV_MASK;
+        data_mask = 0xff & (port_val >> (dev->cur_ioport->io.address_length - 8));
+
+        dprintk("event (0x%.8x [%.2x] [%.2x]) at port 0x%.4x\n",
+                        port_val, ev, data_mask, dev->cur_ioport->io.minimum);
+
+        if (ev == 0x00 || ev == 0xff)
+                return IRQ_HANDLED;
+
+        for (i = 0; sony_pic_eventtypes[i].model; i++) {
+
+                if (spic_dev.model != sony_pic_eventtypes[i].model)
+                        continue;
+
+                if ((data_mask & sony_pic_eventtypes[i].data) !=
+                    sony_pic_eventtypes[i].data)
+                        continue;
+
+                if (!(mask & sony_pic_eventtypes[i].mask))
+                        continue;
+
+                for (j = 0; sony_pic_eventtypes[i].events[j].event; j++) {
+                        if (ev == sony_pic_eventtypes[i].events[j].data) {
+                                device_event =
+                                        sony_pic_eventtypes[i].events[j].event;
+                                goto found;
+                        }
+                }
+        }
+        return IRQ_HANDLED;
+
+found:
+        sony_laptop_report_input_event(device_event);
+        acpi_bus_generate_event(spic_dev.acpi_dev, 1, device_event);
+        sonypi_compat_report_event(device_event);
+
+        return IRQ_HANDLED;
+}
+
+/*****************
+ *
+ *  ACPI driver
+ *
+ *****************/
+static int sony_pic_remove(struct acpi_device *device, int type)
+{
+        struct sony_pic_ioport *io, *tmp_io;
+        struct sony_pic_irq *irq, *tmp_irq;
+
+        sonypi_compat_exit();
+
+        if (sony_pic_disable(device)) {
+                printk(KERN_ERR DRV_PFX "Couldn't disable device.\n");
+                return -ENXIO;
+        }
+
+        free_irq(spic_dev.cur_irq->irq.interrupts[0], &spic_dev);
+        release_region(spic_dev.cur_ioport->io.minimum,
+                        spic_dev.cur_ioport->io.address_length);
+
+        sony_laptop_remove_input();
+
+        /* pf attrs */
+        sysfs_remove_group(&sony_pf_device->dev.kobj, &spic_attribute_group);
+        sony_pf_remove();
+
+        list_for_each_entry_safe(io, tmp_io, &spic_dev.ioports, list) {
+                list_del(&io->list);
+                kfree(io);
+        }
+        list_for_each_entry_safe(irq, tmp_irq, &spic_dev.interrupts, list) {
+                list_del(&irq->list);
+                kfree(irq);
+        }
+        spic_dev.cur_ioport = NULL;
+        spic_dev.cur_irq = NULL;
+
+        dprintk(SONY_PIC_DRIVER_NAME " removed.\n");
+        return 0;
+}
+
+static int sony_pic_add(struct acpi_device *device)
+{
+        int result;
+        struct sony_pic_ioport *io, *tmp_io;
+        struct sony_pic_irq *irq, *tmp_irq;
+
+        printk(KERN_INFO DRV_PFX "%s v%s.\n",
+                SONY_PIC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
+
+        spic_dev.acpi_dev = device;
+        strcpy(acpi_device_class(device), "sony/hotkey");
+        spic_dev.model = sony_pic_detect_device_type();
+        mutex_init(&spic_dev.lock);
+
+        /* read _PRS resources */
+        result = sony_pic_possible_resources(device);
+        if (result) {
+                printk(KERN_ERR DRV_PFX
+                                "Unabe to read possible resources.\n");
+                goto err_free_resources;
+        }
+
+        /* setup input devices and helper fifo */
+        result = sony_laptop_setup_input();
+        if (result) {
+                printk(KERN_ERR DRV_PFX
+                                "Unabe to create input devices.\n");
+                goto err_free_resources;
+        }
+
+        /* request io port */
+        list_for_each_entry(io, &spic_dev.ioports, list) {
+                if (request_region(io->io.minimum, io->io.address_length,
+                                        "Sony Programable I/O Device")) {
+                        dprintk("I/O port: 0x%.4x (0x%.4x) + 0x%.2x\n",
+                                        io->io.minimum, io->io.maximum,
+                                        io->io.address_length);
+                        spic_dev.cur_ioport = io;
+                        break;
+                }
+        }
+        if (!spic_dev.cur_ioport) {
+                printk(KERN_ERR DRV_PFX "Failed to request_region.\n");
+                result = -ENODEV;
+                goto err_remove_input;
+        }
+
+        /* request IRQ */
+        list_for_each_entry(irq, &spic_dev.interrupts, list) {
+                if (!request_irq(irq->irq.interrupts[0], sony_pic_irq,
+                                        IRQF_SHARED, "sony-laptop", &spic_dev)) {
+                        dprintk("IRQ: %d - triggering: %d - "
+                                        "polarity: %d - shr: %d\n",
+                                        irq->irq.interrupts[0],
+                                        irq->irq.triggering,
+                                        irq->irq.polarity,
+                                        irq->irq.sharable);
+                        spic_dev.cur_irq = irq;
+                        break;
+                }
+        }
+        if (!spic_dev.cur_irq) {
+                printk(KERN_ERR DRV_PFX "Failed to request_irq.\n");
+                result = -ENODEV;
+                goto err_release_region;
+        }
+
+        /* set resource status _SRS */
+        result = sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq);
+        if (result) {
+                printk(KERN_ERR DRV_PFX "Couldn't enable device.\n");
+                goto err_free_irq;
+        }
+
+        spic_dev.bluetooth_power = -1;
+        /* create device attributes */
+        result = sony_pf_add();
+        if (result)
+                goto err_disable_device;
+
+        result = sysfs_create_group(&sony_pf_device->dev.kobj, &spic_attribute_group);
+        if (result)
+                goto err_remove_pf;
+
+        if (sonypi_compat_init())
+                goto err_remove_pf;
+
+        return 0;
+
+err_remove_pf:
+        sony_pf_remove();
+
+err_disable_device:
+        sony_pic_disable(device);
+
+err_free_irq:
+        free_irq(spic_dev.cur_irq->irq.interrupts[0], &spic_dev);
+
+err_release_region:
+        release_region(spic_dev.cur_ioport->io.minimum,
+                        spic_dev.cur_ioport->io.address_length);
+
+err_remove_input:
+        sony_laptop_remove_input();
+
+err_free_resources:
+        list_for_each_entry_safe(io, tmp_io, &spic_dev.ioports, list) {
+                list_del(&io->list);
+                kfree(io);
+        }
+        list_for_each_entry_safe(irq, tmp_irq, &spic_dev.interrupts, list) {
+                list_del(&irq->list);
+                kfree(irq);
+        }
+        spic_dev.cur_ioport = NULL;
+        spic_dev.cur_irq = NULL;
+
+        return result;
+}
+
+static int sony_pic_suspend(struct acpi_device *device, pm_message_t state)
+{
+        if (sony_pic_disable(device))
+                return -ENXIO;
+        return 0;
+}
+
+static int sony_pic_resume(struct acpi_device *device)
+{
+        sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq);
+        return 0;
+}
+
+static struct acpi_driver sony_pic_driver = {
+        .name = SONY_PIC_DRIVER_NAME,
+        .class = SONY_PIC_CLASS,
+        .ids = SONY_PIC_HID,
+        .owner = THIS_MODULE,
+        .ops = {
+                .add = sony_pic_add,
+                .remove = sony_pic_remove,
+                .suspend = sony_pic_suspend,
+                .resume = sony_pic_resume,
+                },
+};
+
+static struct dmi_system_id __initdata sonypi_dmi_table[] = {
+        {
+                .ident = "Sony Vaio",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "PCG-"),
+                },
+        },
+        {
+                .ident = "Sony Vaio",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "VGN-"),
+                },
+        },
+        { }
+};
+
+static int __init sony_laptop_init(void)
+{
+        int result;
+
+        if (!no_spic && dmi_check_system(sonypi_dmi_table)) {
+                result = acpi_bus_register_driver(&sony_pic_driver);
+                if (result) {
+                        printk(KERN_ERR DRV_PFX
+                                        "Unable to register SPIC driver.");
+                        goto out;
+                }
+        }
+
+        result = acpi_bus_register_driver(&sony_nc_driver);
+        if (result) {
+                printk(KERN_ERR DRV_PFX "Unable to register SNC driver.");
+                goto out_unregister_pic;
+        }
+
+        return 0;
+
+out_unregister_pic:
+        if (!no_spic)
+                acpi_bus_unregister_driver(&sony_pic_driver);
+out:
+        return result;
 }
 
-static void __exit sony_acpi_exit(void)
+static void __exit sony_laptop_exit(void)
 {
-        acpi_bus_unregister_driver(&sony_acpi_driver);
+        acpi_bus_unregister_driver(&sony_nc_driver);
+        if (!no_spic)
+                acpi_bus_unregister_driver(&sony_pic_driver);
 }
 
-module_init(sony_acpi_init);
-module_exit(sony_acpi_exit);
+module_init(sony_laptop_init);
+module_exit(sony_laptop_exit);
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
new file mode 100644
index 000000000000..6c36a55cb3d1
--- /dev/null
+++ b/drivers/misc/thinkpad_acpi.c
@@ -0,0 +1,4312 @@
+/*
+ *  thinkpad_acpi.c - ThinkPad ACPI Extras
+ *
+ *
+ *  Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ *  Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#define IBM_VERSION "0.14"
+#define TPACPI_SYSFS_VERSION 0x000100
+
+/*
+ *  Changelog:
+ *  2007-03-27  0.14    renamed to thinkpad_acpi and moved to
+ *                      drivers/misc.
+ *
+ *  2006-11-22  0.13    new maintainer
+ *                      changelog now lives in git commit history, and will
+ *                      not be updated further in-file.
+ *
+ *  2005-08-17  0.12    fix compilation on 2.6.13-rc kernels
+ *  2005-03-17  0.11    support for 600e, 770x
+ *                          thanks to Jamie Lentin <lentinj@dial.pipex.com>
+ *                      support for 770e, G41
+ *                      G40 and G41 don't have a thinklight
+ *                      temperatures no longer experimental
+ *                      experimental brightness control
+ *                      experimental volume control
+ *                      experimental fan enable/disable
+ *  2005-01-16  0.10    fix module loading on R30, R31
+ *  2005-01-16  0.9     support for 570, R30, R31
+ *                      ultrabay support on A22p, A3x
+ *                      limit arg for cmos, led, beep, drop experimental status
+ *                      more capable led control on A21e, A22p, T20-22, X20
+ *                      experimental temperatures and fan speed
+ *                      experimental embedded controller register dump
+ *                      mark more functions as __init, drop incorrect __exit
+ *                      use MODULE_VERSION
+ *                          thanks to Henrik Brix Andersen <brix@gentoo.org>
+ *                      fix parameter passing on module loading
+ *                          thanks to Rusty Russell <rusty@rustcorp.com.au>
+ *                          thanks to Jim Radford <radford@blackbean.org>
+ *  2004-11-08  0.8     fix init error case, don't return from a macro
+ *                          thanks to Chris Wright <chrisw@osdl.org>
+ *  2004-10-23  0.7     fix module loading on A21e, A22p, T20, T21, X20
+ *                      fix led control on A21e
+ *  2004-10-19  0.6     use acpi_bus_register_driver() to claim HKEY device
+ *  2004-10-18  0.5     thinklight support on A21e, G40, R32, T20, T21, X20
+ *                      proc file format changed
+ *                      video_switch command
+ *                      experimental cmos control
+ *                      experimental led control
+ *                      experimental acpi sounds
+ *  2004-09-16  0.4     support for module parameters
+ *                      hotkey mask can be prefixed by 0x
+ *                      video output switching
+ *                      video expansion control
+ *                      ultrabay eject support
+ *                      removed lcd brightness/on/off control, didn't work
+ *  2004-08-17  0.3     support for R40
+ *                      lcd off, brightness control
+ *                      thinklight on/off
+ *  2004-08-14  0.2     support for T series, X20
+ *                      bluetooth enable/disable
+ *                      hotkey events disabled by default
+ *                      removed fan control, currently useless
+ *  2004-08-09  0.1     initial release, support for X series
+ */
+
+#include "thinkpad_acpi.h"
+
+MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_DESCRIPTION(IBM_DESC);
+MODULE_VERSION(IBM_VERSION);
+MODULE_LICENSE("GPL");
+
+/* Please remove this in year 2009 */
+MODULE_ALIAS("ibm_acpi");
+
+#define __unused __attribute__ ((unused))
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * ACPI Helpers and device model
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/*************************************************************************
+ * ACPI basic handles
+ */
+
+static acpi_handle root_handle = NULL;
+
+#define IBM_HANDLE(object, parent, paths...)                    \
+        static acpi_handle  object##_handle;                    \
+        static acpi_handle *object##_parent = &parent##_handle; \
+        static char        *object##_path;                      \
+        static char        *object##_paths[] = { paths }
+
+IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0",      /* 240, 240x */
+           "\\_SB.PCI.ISA.EC",  /* 570 */
+           "\\_SB.PCI0.ISA0.EC0",       /* 600e/x, 770e, 770x */
+           "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */
+           "\\_SB.PCI0.AD4S.EC0",       /* i1400, R30 */
+           "\\_SB.PCI0.ICH3.EC0",       /* R31 */
+           "\\_SB.PCI0.LPC.EC", /* all others */
+           );
+
+IBM_HANDLE(ecrd, ec, "ECRD");   /* 570 */
+IBM_HANDLE(ecwr, ec, "ECWR");   /* 570 */
+
+
+/*************************************************************************
+ * Misc ACPI handles
+ */
+
+IBM_HANDLE(cmos, root, "\\UCMS",        /* R50, R50e, R50p, R51, T4x, X31, X40 */
+           "\\CMOS",            /* A3x, G4x, R32, T23, T30, X22-24, X30 */
+           "\\CMS",             /* R40, R40e */
+           );                   /* all others */
+
+IBM_HANDLE(hkey, ec, "\\_SB.HKEY",      /* 600e/x, 770e, 770x */
+           "^HKEY",             /* R30, R31 */
+           "HKEY",              /* all others */
+           );                   /* 570 */
+
+
+/*************************************************************************
+ * ACPI helpers
+ */
+
+static int acpi_evalf(acpi_handle handle,
+                      void *res, char *method, char *fmt, ...)
+{
+        char *fmt0 = fmt;
+        struct acpi_object_list params;
+        union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
+        struct acpi_buffer result, *resultp;
+        union acpi_object out_obj;
+        acpi_status status;
+        va_list ap;
+        char res_type;
+        int success;
+        int quiet;
+
+        if (!*fmt) {
+                printk(IBM_ERR "acpi_evalf() called with empty format\n");
+                return 0;
+        }
+
+        if (*fmt == 'q') {
+                quiet = 1;
+                fmt++;
+        } else
+                quiet = 0;
+
+        res_type = *(fmt++);
+
+        params.count = 0;
+        params.pointer = &in_objs[0];
+
+        va_start(ap, fmt);
+        while (*fmt) {
+                char c = *(fmt++);
+                switch (c) {
+                case 'd':       /* int */
+                        in_objs[params.count].integer.value = va_arg(ap, int);
+                        in_objs[params.count++].type = ACPI_TYPE_INTEGER;
+                        break;
+                        /* add more types as needed */
+                default:
+                        printk(IBM_ERR "acpi_evalf() called "
+                               "with invalid format character '%c'\n", c);
+                        return 0;
+                }
+        }
+        va_end(ap);
+
+        if (res_type != 'v') {
+                result.length = sizeof(out_obj);
+                result.pointer = &out_obj;
+                resultp = &result;
+        } else
+                resultp = NULL;
+
+        status = acpi_evaluate_object(handle, method, &params, resultp);
+
+        switch (res_type) {
+        case 'd':               /* int */
+                if (res)
+                        *(int *)res = out_obj.integer.value;
+                success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
+                break;
+        case 'v':               /* void */
+                success = status == AE_OK;
+                break;
+                /* add more types as needed */
+        default:
+                printk(IBM_ERR "acpi_evalf() called "
+                       "with invalid format character '%c'\n", res_type);
+                return 0;
+        }
+
+        if (!success && !quiet)
+                printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
+                       method, fmt0, status);
+
+        return success;
+}
+
+static void __unused acpi_print_int(acpi_handle handle, char *method)
+{
+        int i;
+
+        if (acpi_evalf(handle, &i, method, "d"))
+                printk(IBM_INFO "%s = 0x%x\n", method, i);
+        else
+                printk(IBM_ERR "error calling %s\n", method);
+}
+
+static int acpi_ec_read(int i, u8 * p)
+{
+        int v;
+
+        if (ecrd_handle) {
+                if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
+                        return 0;
+                *p = v;
+        } else {
+                if (ec_read(i, p) < 0)
+                        return 0;
+        }
+
+        return 1;
+}
+
+static int acpi_ec_write(int i, u8 v)
+{
+        if (ecwr_handle) {
+                if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
+                        return 0;
+        } else {
+                if (ec_write(i, v) < 0)
+                        return 0;
+        }
+
+        return 1;
+}
+
+static int _sta(acpi_handle handle)
+{
+        int status;
+
+        if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
+                status = 0;
+
+        return status;
+}
+
+static int issue_thinkpad_cmos_command(int cmos_cmd)
+{
+        if (!cmos_handle)
+                return -ENXIO;
+
+        if (!acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd))
+                return -EIO;
+
+        return 0;
+}
+
+/*************************************************************************
+ * ACPI device model
+ */
+
+static void drv_acpi_handle_init(char *name,
+                           acpi_handle *handle, acpi_handle parent,
+                           char **paths, int num_paths, char **path)
+{
+        int i;
+        acpi_status status;
+
+        vdbg_printk(TPACPI_DBG_INIT, "trying to locate ACPI handle for %s\n",
+                name);
+
+        for (i = 0; i < num_paths; i++) {
+                status = acpi_get_handle(parent, paths[i], handle);
+                if (ACPI_SUCCESS(status)) {
+                        *path = paths[i];
+                        dbg_printk(TPACPI_DBG_INIT,
+                                   "Found ACPI handle %s for %s\n",
+                                   *path, name);
+                        return;
+                }
+        }
+
+        vdbg_printk(TPACPI_DBG_INIT, "ACPI handle for %s not found\n",
+                    name);
+        *handle = NULL;
+}
+
+static void dispatch_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+        struct ibm_struct *ibm = data;
+
+        if (!ibm || !ibm->acpi || !ibm->acpi->notify)
+                return;
+
+        ibm->acpi->notify(ibm, event);
+}
+
+static int __init setup_acpi_notify(struct ibm_struct *ibm)
+{
+        acpi_status status;
+        int rc;
+
+        BUG_ON(!ibm->acpi);
+
+        if (!*ibm->acpi->handle)
+                return 0;
+
+        vdbg_printk(TPACPI_DBG_INIT,
+                "setting up ACPI notify for %s\n", ibm->name);
+
+        rc = acpi_bus_get_device(*ibm->acpi->handle, &ibm->acpi->device);
+        if (rc < 0) {
+                printk(IBM_ERR "acpi_bus_get_device(%s) failed: %d\n",
+                        ibm->name, rc);
+                return -ENODEV;
+        }
+
+        acpi_driver_data(ibm->acpi->device) = ibm;
+        sprintf(acpi_device_class(ibm->acpi->device), "%s/%s",
+                IBM_ACPI_EVENT_PREFIX,
+                ibm->name);
+
+        status = acpi_install_notify_handler(*ibm->acpi->handle,
+                        ibm->acpi->type, dispatch_acpi_notify, ibm);
+        if (ACPI_FAILURE(status)) {
+                if (status == AE_ALREADY_EXISTS) {
+                        printk(IBM_NOTICE "another device driver is already handling %s events\n",
+                                ibm->name);
+                } else {
+                        printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
+                                ibm->name, status);
+                }
+                return -ENODEV;
+        }
+        ibm->flags.acpi_notify_installed = 1;
+        return 0;
+}
+
+static int __init tpacpi_device_add(struct acpi_device *device)
+{
+        return 0;
+}
+
+static int __init register_tpacpi_subdriver(struct ibm_struct *ibm)
+{
+        int rc;
+
+        dbg_printk(TPACPI_DBG_INIT,
+                "registering %s as an ACPI driver\n", ibm->name);
+
+        BUG_ON(!ibm->acpi);
+
+        ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
+        if (!ibm->acpi->driver) {
+                printk(IBM_ERR "kzalloc(ibm->driver) failed\n");
+                return -ENOMEM;
+        }
+
+        sprintf(ibm->acpi->driver->name, "%s_%s", IBM_NAME, ibm->name);
+        ibm->acpi->driver->ids = ibm->acpi->hid;
+        ibm->acpi->driver->ops.add = &tpacpi_device_add;
+
+        rc = acpi_bus_register_driver(ibm->acpi->driver);
+        if (rc < 0) {
+                printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
+                       ibm->acpi->hid, rc);
+                kfree(ibm->acpi->driver);
+                ibm->acpi->driver = NULL;
+        } else if (!rc)
+                ibm->flags.acpi_driver_registered = 1;
+
+        return rc;
+}
+
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Procfs Helpers
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+static int dispatch_procfs_read(char *page, char **start, off_t off,
+                        int count, int *eof, void *data)
+{
+        struct ibm_struct *ibm = data;
+        int len;
+
+        if (!ibm || !ibm->read)
+                return -EINVAL;
+
+        len = ibm->read(page);
+        if (len < 0)
+                return len;
+
+        if (len <= off + count)
+                *eof = 1;
+        *start = page + off;
+        len -= off;
+        if (len > count)
+                len = count;
+        if (len < 0)
+                len = 0;
+
+        return len;
+}
+
+static int dispatch_procfs_write(struct file *file,
+                        const char __user * userbuf,
+                        unsigned long count, void *data)
+{
+        struct ibm_struct *ibm = data;
+        char *kernbuf;
+        int ret;
+
+        if (!ibm || !ibm->write)
+                return -EINVAL;
+
+        kernbuf = kmalloc(count + 2, GFP_KERNEL);
+        if (!kernbuf)
+                return -ENOMEM;
+
+        if (copy_from_user(kernbuf, userbuf, count)) {
+                kfree(kernbuf);
+                return -EFAULT;
+        }
+
+        kernbuf[count] = 0;
+        strcat(kernbuf, ",");
+        ret = ibm->write(kernbuf);
+        if (ret == 0)
+                ret = count;
+
+        kfree(kernbuf);
+
+        return ret;
+}
+
+static char *next_cmd(char **cmds)
+{
+        char *start = *cmds;
+        char *end;
+
+        while ((end = strchr(start, ',')) && end == start)
+                start = end + 1;
+
+        if (!end)
+                return NULL;
+
+        *end = 0;
+        *cmds = end + 1;
+        return start;
+}
+
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Device model: hwmon and platform
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+static struct platform_device *tpacpi_pdev = NULL;
+static struct class_device *tpacpi_hwmon = NULL;
+
+static struct platform_driver tpacpi_pdriver = {
+        .driver = {
+                .name = IBM_DRVR_NAME,
+                .owner = THIS_MODULE,
+        },
+};
+
+
+/*************************************************************************
+ * thinkpad-acpi driver attributes
+ */
+
+/* interface_version --------------------------------------------------- */
+static ssize_t tpacpi_driver_interface_version_show(
+                                struct device_driver *drv,
+                                char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "0x%08x\n", TPACPI_SYSFS_VERSION);
+}
+
+static DRIVER_ATTR(interface_version, S_IRUGO,
+                tpacpi_driver_interface_version_show, NULL);
+
+/* debug_level --------------------------------------------------------- */
+static ssize_t tpacpi_driver_debug_show(struct device_driver *drv,
+                                                char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "0x%04x\n", dbg_level);
+}
+
+static ssize_t tpacpi_driver_debug_store(struct device_driver *drv,
+                                                const char *buf, size_t count)
+{
+        unsigned long t;
+
+        if (parse_strtoul(buf, 0xffff, &t))
+                return -EINVAL;
+
+        dbg_level = t;
+
+        return count;
+}
+
+static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
+                tpacpi_driver_debug_show, tpacpi_driver_debug_store);
+
+/* version ------------------------------------------------------------- */
+static ssize_t tpacpi_driver_version_show(struct device_driver *drv,
+                                                char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "%s v%s\n", IBM_DESC, IBM_VERSION);
+}
+
+static DRIVER_ATTR(version, S_IRUGO,
+                tpacpi_driver_version_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
+static struct driver_attribute* tpacpi_driver_attributes[] = {
+        &driver_attr_debug_level, &driver_attr_version,
+        &driver_attr_interface_version,
+};
+
+static int __init tpacpi_create_driver_attributes(struct device_driver *drv)
+{
+        int i, res;
+
+        i = 0;
+        res = 0;
+        while (!res && i < ARRAY_SIZE(tpacpi_driver_attributes)) {
+                res = driver_create_file(drv, tpacpi_driver_attributes[i]);
+                i++;
+        }
+
+        return res;
+}
+
+static void tpacpi_remove_driver_attributes(struct device_driver *drv)
+{
+        int i;
+
+        for(i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++)
+                driver_remove_file(drv, tpacpi_driver_attributes[i]);
+}
+
+/*************************************************************************
+ * sysfs support helpers
+ */
+
+struct attribute_set_obj {
+        struct attribute_set s;
+        struct attribute *a;
+} __attribute__((packed));
+
+static struct attribute_set *create_attr_set(unsigned int max_members,
+                                                const char* name)
+{
+        struct attribute_set_obj *sobj;
+
+        if (max_members == 0)
+                return NULL;
+
+        /* Allocates space for implicit NULL at the end too */
+        sobj = kzalloc(sizeof(struct attribute_set_obj) +
+                    max_members * sizeof(struct attribute *),
+                    GFP_KERNEL);
+        if (!sobj)
+                return NULL;
+        sobj->s.max_members = max_members;
+        sobj->s.group.attrs = &sobj->a;
+        sobj->s.group.name = name;
+
+        return &sobj->s;
+}
+
+/* not multi-threaded safe, use it in a single thread per set */
+static int add_to_attr_set(struct attribute_set* s, struct attribute *attr)
+{
+        if (!s || !attr)
+                return -EINVAL;
+
+        if (s->members >= s->max_members)
+                return -ENOMEM;
+
+        s->group.attrs[s->members] = attr;
+        s->members++;
+
+        return 0;
+}
+
+static int add_many_to_attr_set(struct attribute_set* s,
+                        struct attribute **attr,
+                        unsigned int count)
+{
+        int i, res;
+
+        for (i = 0; i < count; i++) {
+                res = add_to_attr_set(s, attr[i]);
+                if (res)
+                        return res;
+        }
+
+        return 0;
+}
+
+static void delete_attr_set(struct attribute_set* s, struct kobject *kobj)
+{
+        sysfs_remove_group(kobj, &s->group);
+        destroy_attr_set(s);
+}
+
+static int parse_strtoul(const char *buf,
+                unsigned long max, unsigned long *value)
+{
+        char *endp;
+
+        *value = simple_strtoul(buf, &endp, 0);
+        while (*endp && isspace(*endp))
+                endp++;
+        if (*endp || *value > max)
+                return -EINVAL;
+
+        return 0;
+}
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Subdrivers
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/*************************************************************************
+ * thinkpad-acpi init subdriver
+ */
+
+static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm)
+{
+        printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
+        printk(IBM_INFO "%s\n", IBM_URL);
+
+        if (ibm_thinkpad_ec_found)
+                printk(IBM_INFO "ThinkPad EC firmware %s\n",
+                       ibm_thinkpad_ec_found);
+
+        return 0;
+}
+
+static int thinkpad_acpi_driver_read(char *p)
+{
+        int len = 0;
+
+        len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
+        len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
+
+        return len;
+}
+
+static struct ibm_struct thinkpad_acpi_driver_data = {
+        .name = "driver",
+        .read = thinkpad_acpi_driver_read,
+};
+
+/*************************************************************************
+ * Hotkey subdriver
+ */
+
+static int hotkey_orig_status;
+static int hotkey_orig_mask;
+
+static struct attribute_set *hotkey_dev_attributes = NULL;
+
+/* sysfs hotkey enable ------------------------------------------------- */
+static ssize_t hotkey_enable_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        int res, status, mask;
+
+        res = hotkey_get(&status, &mask);
+        if (res)
+                return res;
+
+        return snprintf(buf, PAGE_SIZE, "%d\n", status);
+}
+
+static ssize_t hotkey_enable_store(struct device *dev,
+                            struct device_attribute *attr,
+                            const char *buf, size_t count)
+{
+        unsigned long t;
+        int res, status, mask;
+
+        if (parse_strtoul(buf, 1, &t))
+                return -EINVAL;
+
+        res = hotkey_get(&status, &mask);
+        if (!res)
+                res = hotkey_set(t, mask);
+
+        return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_hotkey_enable =
+        __ATTR(enable, S_IWUSR | S_IRUGO,
+                hotkey_enable_show, hotkey_enable_store);
+
+/* sysfs hotkey mask --------------------------------------------------- */
+static ssize_t hotkey_mask_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        int res, status, mask;
+
+        res = hotkey_get(&status, &mask);
+        if (res)
+                return res;
+
+        return snprintf(buf, PAGE_SIZE, "0x%04x\n", mask);
+}
+
+static ssize_t hotkey_mask_store(struct device *dev,
+                            struct device_attribute *attr,
+                            const char *buf, size_t count)
+{
+        unsigned long t;
+        int res, status, mask;
+
+        if (parse_strtoul(buf, 0xffff, &t))
+                return -EINVAL;
+
+        res = hotkey_get(&status, &mask);
+        if (!res)
+                hotkey_set(status, t);
+
+        return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_hotkey_mask =
+        __ATTR(mask, S_IWUSR | S_IRUGO,
+                hotkey_mask_show, hotkey_mask_store);
+
+/* sysfs hotkey bios_enabled ------------------------------------------- */
+static ssize_t hotkey_bios_enabled_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_orig_status);
+}
+
+static struct device_attribute dev_attr_hotkey_bios_enabled =
+        __ATTR(bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL);
+
+/* sysfs hotkey bios_mask ---------------------------------------------- */
+static ssize_t hotkey_bios_mask_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "0x%04x\n", hotkey_orig_mask);
+}
+
+static struct device_attribute dev_attr_hotkey_bios_mask =
+        __ATTR(bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *hotkey_mask_attributes[] = {
+        &dev_attr_hotkey_mask.attr,
+        &dev_attr_hotkey_bios_enabled.attr,
+        &dev_attr_hotkey_bios_mask.attr,
+};
+
+static int __init hotkey_init(struct ibm_init_struct *iibm)
+{
+        int res;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(hkey);
+        mutex_init(&hotkey_mutex);
+
+        /* hotkey not supported on 570 */
+        tp_features.hotkey = hkey_handle != NULL;
+
+        vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n",
+                str_supported(tp_features.hotkey));
+
+        if (tp_features.hotkey) {
+                hotkey_dev_attributes = create_attr_set(4,
+                                                TPACPI_HOTKEY_SYSFS_GROUP);
+                if (!hotkey_dev_attributes)
+                        return -ENOMEM;
+                res = add_to_attr_set(hotkey_dev_attributes,
+                                &dev_attr_hotkey_enable.attr);
+                if (res)
+                        return res;
+
+                /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+                   A30, R30, R31, T20-22, X20-21, X22-24 */
+                tp_features.hotkey_mask =
+                        acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
+
+                vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
+                        str_supported(tp_features.hotkey_mask));
+
+                res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask);
+                if (!res && tp_features.hotkey_mask) {
+                        res = add_many_to_attr_set(hotkey_dev_attributes,
+                                hotkey_mask_attributes,
+                                ARRAY_SIZE(hotkey_mask_attributes));
+                }
+                if (!res)
+                        res = register_attr_set_with_sysfs(
+                                        hotkey_dev_attributes,
+                                        &tpacpi_pdev->dev.kobj);
+
+                if (res)
+                        return res;
+        }
+
+        return (tp_features.hotkey)? 0 : 1;
+}
+
+static void hotkey_exit(void)
+{
+        int res;
+
+        if (tp_features.hotkey) {
+                dbg_printk(TPACPI_DBG_EXIT, "restoring original hotkey mask\n");
+                res = hotkey_set(hotkey_orig_status, hotkey_orig_mask);
+                if (res)
+                        printk(IBM_ERR "failed to restore hotkey to BIOS defaults\n");
+        }
+
+        if (hotkey_dev_attributes) {
+                delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+                hotkey_dev_attributes = NULL;
+        }
+}
+
+static void hotkey_notify(struct ibm_struct *ibm, u32 event)
+{
+        int hkey;
+
+        if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
+                acpi_bus_generate_event(ibm->acpi->device, event, hkey);
+        else {
+                printk(IBM_ERR "unknown hotkey event %d\n", event);
+                acpi_bus_generate_event(ibm->acpi->device, event, 0);
+        }
+}
+
+/*
+ * Call with hotkey_mutex held
+ */
+static int hotkey_get(int *status, int *mask)
+{
+        if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
+                return -EIO;
+
+        if (tp_features.hotkey_mask)
+                if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
+                        return -EIO;
+
+        return 0;
+}
+
+/*
+ * Call with hotkey_mutex held
+ */
+static int hotkey_set(int status, int mask)
+{
+        int i;
+
+        if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
+                return -EIO;
+
+        if (tp_features.hotkey_mask)
+                for (i = 0; i < 32; i++) {
+                        int bit = ((1 << i) & mask) != 0;
+                        if (!acpi_evalf(hkey_handle,
+                                        NULL, "MHKM", "vdd", i + 1, bit))
+                                return -EIO;
+                }
+
+        return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int hotkey_read(char *p)
+{
+        int res, status, mask;
+        int len = 0;
+
+        if (!tp_features.hotkey) {
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+                return len;
+        }
+
+        res = mutex_lock_interruptible(&hotkey_mutex);
+        if (res < 0)
+                return res;
+        res = hotkey_get(&status, &mask);
+        mutex_unlock(&hotkey_mutex);
+        if (res)
+                return res;
+
+        len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
+        if (tp_features.hotkey_mask) {
+                len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
+                len += sprintf(p + len,
+                               "commands:\tenable, disable, reset, <mask>\n");
+        } else {
+                len += sprintf(p + len, "mask:\t\tnot supported\n");
+                len += sprintf(p + len, "commands:\tenable, disable, reset\n");
+        }
+
+        return len;
+}
+
+static int hotkey_write(char *buf)
+{
+        int res, status, mask;
+        char *cmd;
+        int do_cmd = 0;
+
+        if (!tp_features.hotkey)
+                return -ENODEV;
+
+        res = mutex_lock_interruptible(&hotkey_mutex);
+        if (res < 0)
+                return res;
+
+        res = hotkey_get(&status, &mask);
+        if (res)
+                goto errexit;
+
+        res = 0;
+        while ((cmd = next_cmd(&buf))) {
+                if (strlencmp(cmd, "enable") == 0) {
+                        status = 1;
+                } else if (strlencmp(cmd, "disable") == 0) {
+                        status = 0;
+                } else if (strlencmp(cmd, "reset") == 0) {
+                        status = hotkey_orig_status;
+                        mask = hotkey_orig_mask;
+                } else if (sscanf(cmd, "0x%x", &mask) == 1) {
+                        /* mask set */
+                } else if (sscanf(cmd, "%x", &mask) == 1) {
+                        /* mask set */
+                } else {
+                        res = -EINVAL;
+                        goto errexit;
+                }
+                do_cmd = 1;
+        }
+
+        if (do_cmd)
+                res = hotkey_set(status, mask);
+
+errexit:
+        mutex_unlock(&hotkey_mutex);
+        return res;
+}
+
+static struct tp_acpi_drv_struct ibm_hotkey_acpidriver = {
+        .hid = IBM_HKEY_HID,
+        .notify = hotkey_notify,
+        .handle = &hkey_handle,
+        .type = ACPI_DEVICE_NOTIFY,
+};
+
+static struct ibm_struct hotkey_driver_data = {
+        .name = "hotkey",
+        .read = hotkey_read,
+        .write = hotkey_write,
+        .exit = hotkey_exit,
+        .acpi = &ibm_hotkey_acpidriver,
+};
+
+/*************************************************************************
+ * Bluetooth subdriver
+ */
+
+/* sysfs bluetooth enable ---------------------------------------------- */
+static ssize_t bluetooth_enable_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        int status;
+
+        status = bluetooth_get_radiosw();
+        if (status < 0)
+                return status;
+
+        return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+}
+
+static ssize_t bluetooth_enable_store(struct device *dev,
+                            struct device_attribute *attr,
+                            const char *buf, size_t count)
+{
+        unsigned long t;
+        int res;
+
+        if (parse_strtoul(buf, 1, &t))
+                return -EINVAL;
+
+        res = bluetooth_set_radiosw(t);
+
+        return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_bluetooth_enable =
+        __ATTR(enable, S_IWUSR | S_IRUGO,
+                bluetooth_enable_show, bluetooth_enable_store);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *bluetooth_attributes[] = {
+        &dev_attr_bluetooth_enable.attr,
+        NULL
+};
+
+static const struct attribute_group bluetooth_attr_group = {
+        .name = TPACPI_BLUETH_SYSFS_GROUP,
+        .attrs = bluetooth_attributes,
+};
+
+static int __init bluetooth_init(struct ibm_init_struct *iibm)
+{
+        int res;
+        int status = 0;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing bluetooth subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(hkey);
+
+        /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+           G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
+        tp_features.bluetooth = hkey_handle &&
+            acpi_evalf(hkey_handle, &status, "GBDC", "qd");
+
+        vdbg_printk(TPACPI_DBG_INIT, "bluetooth is %s, status 0x%02x\n",
+                str_supported(tp_features.bluetooth),
+                status);
+
+        if (tp_features.bluetooth) {
+                if (!(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
+                        /* no bluetooth hardware present in system */
+                        tp_features.bluetooth = 0;
+                        dbg_printk(TPACPI_DBG_INIT,
+                                   "bluetooth hardware not installed\n");
+                } else {
+                        res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+                                        &bluetooth_attr_group);
+                        if (res)
+                                return res;
+                }
+        }
+
+        return (tp_features.bluetooth)? 0 : 1;
+}
+
+static void bluetooth_exit(void)
+{
+        sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+                        &bluetooth_attr_group);
+}
+
+static int bluetooth_get_radiosw(void)
+{
+        int status;
+
+        if (!tp_features.bluetooth)
+                return -ENODEV;
+
+        if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+                return -EIO;
+
+        return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0);
+}
+
+static int bluetooth_set_radiosw(int radio_on)
+{
+        int status;
+
+        if (!tp_features.bluetooth)
+                return -ENODEV;
+
+        if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+                return -EIO;
+        if (radio_on)
+                status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+        else
+                status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+        if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
+                return -EIO;
+
+        return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int bluetooth_read(char *p)
+{
+        int len = 0;
+        int status = bluetooth_get_radiosw();
+
+        if (!tp_features.bluetooth)
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+        else {
+                len += sprintf(p + len, "status:\t\t%s\n",
+                                (status)? "enabled" : "disabled");
+                len += sprintf(p + len, "commands:\tenable, disable\n");
+        }
+
+        return len;
+}
+
+static int bluetooth_write(char *buf)
+{
+        char *cmd;
+
+        if (!tp_features.bluetooth)
+                return -ENODEV;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (strlencmp(cmd, "enable") == 0) {
+                        bluetooth_set_radiosw(1);
+                } else if (strlencmp(cmd, "disable") == 0) {
+                        bluetooth_set_radiosw(0);
+                } else
+                        return -EINVAL;
+        }
+
+        return 0;
+}
+
+static struct ibm_struct bluetooth_driver_data = {
+        .name = "bluetooth",
+        .read = bluetooth_read,
+        .write = bluetooth_write,
+        .exit = bluetooth_exit,
+};
+
+/*************************************************************************
+ * Wan subdriver
+ */
+
+/* sysfs wan enable ---------------------------------------------------- */
+static ssize_t wan_enable_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        int status;
+
+        status = wan_get_radiosw();
+        if (status < 0)
+                return status;
+
+        return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+}
+
+static ssize_t wan_enable_store(struct device *dev,
+                            struct device_attribute *attr,
+                            const char *buf, size_t count)
+{
+        unsigned long t;
+        int res;
+
+        if (parse_strtoul(buf, 1, &t))
+                return -EINVAL;
+
+        res = wan_set_radiosw(t);
+
+        return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_wan_enable =
+        __ATTR(enable, S_IWUSR | S_IRUGO,
+                wan_enable_show, wan_enable_store);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *wan_attributes[] = {
+        &dev_attr_wan_enable.attr,
+        NULL
+};
+
+static const struct attribute_group wan_attr_group = {
+        .name = TPACPI_WAN_SYSFS_GROUP,
+        .attrs = wan_attributes,
+};
+
+static int __init wan_init(struct ibm_init_struct *iibm)
+{
+        int res;
+        int status = 0;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing wan subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(hkey);
+
+        tp_features.wan = hkey_handle &&
+            acpi_evalf(hkey_handle, &status, "GWAN", "qd");
+
+        vdbg_printk(TPACPI_DBG_INIT, "wan is %s, status 0x%02x\n",
+                str_supported(tp_features.wan),
+                status);
+
+        if (tp_features.wan) {
+                if (!(status & TP_ACPI_WANCARD_HWPRESENT)) {
+                        /* no wan hardware present in system */
+                        tp_features.wan = 0;
+                        dbg_printk(TPACPI_DBG_INIT,
+                                   "wan hardware not installed\n");
+                } else {
+                        res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+                                        &wan_attr_group);
+                        if (res)
+                                return res;
+                }
+        }
+
+        return (tp_features.wan)? 0 : 1;
+}
+
+static void wan_exit(void)
+{
+        sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+                &wan_attr_group);
+}
+
+static int wan_get_radiosw(void)
+{
+        int status;
+
+        if (!tp_features.wan)
+                return -ENODEV;
+
+        if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+                return -EIO;
+
+        return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0);
+}
+
+static int wan_set_radiosw(int radio_on)
+{
+        int status;
+
+        if (!tp_features.wan)
+                return -ENODEV;
+
+        if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+                return -EIO;
+        if (radio_on)
+                status |= TP_ACPI_WANCARD_RADIOSSW;
+        else
+                status &= ~TP_ACPI_WANCARD_RADIOSSW;
+        if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
+                return -EIO;
+
+        return 0;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int wan_read(char *p)
+{
+        int len = 0;
+        int status = wan_get_radiosw();
+
+        if (!tp_features.wan)
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+        else {
+                len += sprintf(p + len, "status:\t\t%s\n",
+                                (status)? "enabled" : "disabled");
+                len += sprintf(p + len, "commands:\tenable, disable\n");
+        }
+
+        return len;
+}
+
+static int wan_write(char *buf)
+{
+        char *cmd;
+
+        if (!tp_features.wan)
+                return -ENODEV;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (strlencmp(cmd, "enable") == 0) {
+                        wan_set_radiosw(1);
+                } else if (strlencmp(cmd, "disable") == 0) {
+                        wan_set_radiosw(0);
+                } else
+                        return -EINVAL;
+        }
+
+        return 0;
+}
+
+static struct ibm_struct wan_driver_data = {
+        .name = "wan",
+        .read = wan_read,
+        .write = wan_write,
+        .exit = wan_exit,
+        .flags.experimental = 1,
+};
+
+/*************************************************************************
+ * Video subdriver
+ */
+
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
+
+IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA",      /* 570 */
+           "\\_SB.PCI0.AGP0.VID0",      /* 600e/x, 770x */
+           "\\_SB.PCI0.VID0",   /* 770e */
+           "\\_SB.PCI0.VID",    /* A21e, G4x, R50e, X30, X40 */
+           "\\_SB.PCI0.AGP.VID",        /* all others */
+           );                           /* R30, R31 */
+
+IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID");  /* G41 */
+
+static int __init video_init(struct ibm_init_struct *iibm)
+{
+        int ivga;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing video subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(vid);
+        IBM_ACPIHANDLE_INIT(vid2);
+
+        if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
+                /* G41, assume IVGA doesn't change */
+                vid_handle = vid2_handle;
+
+        if (!vid_handle)
+                /* video switching not supported on R30, R31 */
+                video_supported = TPACPI_VIDEO_NONE;
+        else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
+                /* 570 */
+                video_supported = TPACPI_VIDEO_570;
+        else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
+                /* 600e/x, 770e, 770x */
+                video_supported = TPACPI_VIDEO_770;
+        else
+                /* all others */
+                video_supported = TPACPI_VIDEO_NEW;
+
+        vdbg_printk(TPACPI_DBG_INIT, "video is %s, mode %d\n",
+                str_supported(video_supported != TPACPI_VIDEO_NONE),
+                video_supported);
+
+        return (video_supported != TPACPI_VIDEO_NONE)? 0 : 1;
+}
+
+static void video_exit(void)
+{
+        dbg_printk(TPACPI_DBG_EXIT,
+                   "restoring original video autoswitch mode\n");
+        if (video_autosw_set(video_orig_autosw))
+                printk(IBM_ERR "error while trying to restore original "
+                        "video autoswitch mode\n");
+}
+
+static int video_outputsw_get(void)
+{
+        int status = 0;
+        int i;
+
+        switch (video_supported) {
+        case TPACPI_VIDEO_570:
+                if (!acpi_evalf(NULL, &i, "\\_SB.PHS", "dd",
+                                 TP_ACPI_VIDEO_570_PHSCMD))
+                        return -EIO;
+                status = i & TP_ACPI_VIDEO_570_PHSMASK;
+                break;
+        case TPACPI_VIDEO_770:
+                if (!acpi_evalf(NULL, &i, "\\VCDL", "d"))
+                        return -EIO;
+                if (i)
+                        status |= TP_ACPI_VIDEO_S_LCD;
+                if (!acpi_evalf(NULL, &i, "\\VCDC", "d"))
+                        return -EIO;
+                if (i)
+                        status |= TP_ACPI_VIDEO_S_CRT;
+                break;
+        case TPACPI_VIDEO_NEW:
+                if (!acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1) ||
+                    !acpi_evalf(NULL, &i, "\\VCDC", "d"))
+                        return -EIO;
+                if (i)
+                        status |= TP_ACPI_VIDEO_S_CRT;
+
+                if (!acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0) ||
+                    !acpi_evalf(NULL, &i, "\\VCDL", "d"))
+                        return -EIO;
+                if (i)
+                        status |= TP_ACPI_VIDEO_S_LCD;
+                if (!acpi_evalf(NULL, &i, "\\VCDD", "d"))
+                        return -EIO;
+                if (i)
+                        status |= TP_ACPI_VIDEO_S_DVI;
+                break;
+        default:
+                return -ENOSYS;
+        }
+
+        return status;
+}
+
+static int video_outputsw_set(int status)
+{
+        int autosw;
+        int res = 0;
+
+        switch (video_supported) {
+        case TPACPI_VIDEO_570:
+                res = acpi_evalf(NULL, NULL,
+                                 "\\_SB.PHS2", "vdd",
+                                 TP_ACPI_VIDEO_570_PHS2CMD,
+                                 status | TP_ACPI_VIDEO_570_PHS2SET);
+                break;
+        case TPACPI_VIDEO_770:
+                autosw = video_autosw_get();
+                if (autosw < 0)
+                        return autosw;
+
+                res = video_autosw_set(1);
+                if (res)
+                        return res;
+                res = acpi_evalf(vid_handle, NULL,
+                                 "ASWT", "vdd", status * 0x100, 0);
+                if (!autosw && video_autosw_set(autosw)) {
+                        printk(IBM_ERR "video auto-switch left enabled due to error\n");
+                        return -EIO;
+                }
+                break;
+        case TPACPI_VIDEO_NEW:
+                res = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
+                        acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
+                break;
+        default:
+                return -ENOSYS;
+        }
+
+        return (res)? 0 : -EIO;
+}
+
+static int video_autosw_get(void)
+{
+        int autosw = 0;
+
+        switch (video_supported) {
+        case TPACPI_VIDEO_570:
+                if (!acpi_evalf(vid_handle, &autosw, "SWIT", "d"))
+                        return -EIO;
+                break;
+        case TPACPI_VIDEO_770:
+        case TPACPI_VIDEO_NEW:
+                if (!acpi_evalf(vid_handle, &autosw, "^VDEE", "d"))
+                        return -EIO;
+                break;
+        default:
+                return -ENOSYS;
+        }
+
+        return autosw & 1;
+}
+
+static int video_autosw_set(int enable)
+{
+        if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", (enable)? 1 : 0))
+                return -EIO;
+        return 0;
+}
+
+static int video_outputsw_cycle(void)
+{
+        int autosw = video_autosw_get();
+        int res;
+
+        if (autosw < 0)
+                return autosw;
+
+        switch (video_supported) {
+        case TPACPI_VIDEO_570:
+                res = video_autosw_set(1);
+                if (res)
+                        return res;
+                res = acpi_evalf(ec_handle, NULL, "_Q16", "v");
+                break;
+        case TPACPI_VIDEO_770:
+        case TPACPI_VIDEO_NEW:
+                res = video_autosw_set(1);
+                if (res)
+                        return res;
+                res = acpi_evalf(vid_handle, NULL, "VSWT", "v");
+                break;
+        default:
+                return -ENOSYS;
+        }
+        if (!autosw && video_autosw_set(autosw)) {
+                printk(IBM_ERR "video auto-switch left enabled due to error\n");
+                return -EIO;
+        }
+
+        return (res)? 0 : -EIO;
+}
+
+static int video_expand_toggle(void)
+{
+        switch (video_supported) {
+        case TPACPI_VIDEO_570:
+                return acpi_evalf(ec_handle, NULL, "_Q17", "v")?
+                        0 : -EIO;
+        case TPACPI_VIDEO_770:
+                return acpi_evalf(vid_handle, NULL, "VEXP", "v")?
+                        0 : -EIO;
+        case TPACPI_VIDEO_NEW:
+                return acpi_evalf(NULL, NULL, "\\VEXP", "v")?
+                        0 : -EIO;
+        default:
+                return -ENOSYS;
+        }
+        /* not reached */
+}
+
+static int video_read(char *p)
+{
+        int status, autosw;
+        int len = 0;
+
+        if (video_supported == TPACPI_VIDEO_NONE) {
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+                return len;
+        }
+
+        status = video_outputsw_get();
+        if (status < 0)
+                return status;
+
+        autosw = video_autosw_get();
+        if (autosw < 0)
+                return autosw;
+
+        len += sprintf(p + len, "status:\t\tsupported\n");
+        len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
+        len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
+        if (video_supported == TPACPI_VIDEO_NEW)
+                len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
+        len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
+        len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
+        len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
+        if (video_supported == TPACPI_VIDEO_NEW)
+                len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
+        len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
+        len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
+
+        return len;
+}
+
+static int video_write(char *buf)
+{
+        char *cmd;
+        int enable, disable, status;
+        int res;
+
+        if (video_supported == TPACPI_VIDEO_NONE)
+                return -ENODEV;
+
+        enable = 0;
+        disable = 0;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (strlencmp(cmd, "lcd_enable") == 0) {
+                        enable |= TP_ACPI_VIDEO_S_LCD;
+                } else if (strlencmp(cmd, "lcd_disable") == 0) {
+                        disable |= TP_ACPI_VIDEO_S_LCD;
+                } else if (strlencmp(cmd, "crt_enable") == 0) {
+                        enable |= TP_ACPI_VIDEO_S_CRT;
+                } else if (strlencmp(cmd, "crt_disable") == 0) {
+                        disable |= TP_ACPI_VIDEO_S_CRT;
+                } else if (video_supported == TPACPI_VIDEO_NEW &&
+                           strlencmp(cmd, "dvi_enable") == 0) {
+                        enable |= TP_ACPI_VIDEO_S_DVI;
+                } else if (video_supported == TPACPI_VIDEO_NEW &&
+                           strlencmp(cmd, "dvi_disable") == 0) {
+                        disable |= TP_ACPI_VIDEO_S_DVI;
+                } else if (strlencmp(cmd, "auto_enable") == 0) {
+                        res = video_autosw_set(1);
+                        if (res)
+                                return res;
+                } else if (strlencmp(cmd, "auto_disable") == 0) {
+                        res = video_autosw_set(0);
+                        if (res)
+                                return res;
+                } else if (strlencmp(cmd, "video_switch") == 0) {
+                        res = video_outputsw_cycle();
+                        if (res)
+                                return res;
+                } else if (strlencmp(cmd, "expand_toggle") == 0) {
+                        res = video_expand_toggle();
+                        if (res)
+                                return res;
+                } else
+                        return -EINVAL;
+        }
+
+        if (enable || disable) {
+                status = video_outputsw_get();
+                if (status < 0)
+                        return status;
+                res = video_outputsw_set((status & ~disable) | enable);
+                if (res)
+                        return res;
+        }
+
+        return 0;
+}
+
+static struct ibm_struct video_driver_data = {
+        .name = "video",
+        .read = video_read,
+        .write = video_write,
+        .exit = video_exit,
+};
+
+/*************************************************************************
+ * Light (thinklight) subdriver
+ */
+
+IBM_HANDLE(lght, root, "\\LGHT");       /* A21e, A2xm/p, T20-22, X20-21 */
+IBM_HANDLE(ledb, ec, "LEDB");           /* G4x */
+
+static int __init light_init(struct ibm_init_struct *iibm)
+{
+        vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(ledb);
+        IBM_ACPIHANDLE_INIT(lght);
+        IBM_ACPIHANDLE_INIT(cmos);
+
+        /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
+        tp_features.light = (cmos_handle || lght_handle) && !ledb_handle;
+
+        if (tp_features.light)
+                /* light status not supported on
+                   570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
+                tp_features.light_status =
+                        acpi_evalf(ec_handle, NULL, "KBLT", "qv");
+
+        vdbg_printk(TPACPI_DBG_INIT, "light is %s\n",
+                str_supported(tp_features.light));
+
+        return (tp_features.light)? 0 : 1;
+}
+
+static int light_read(char *p)
+{
+        int len = 0;
+        int status = 0;
+
+        if (!tp_features.light) {
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+        } else if (!tp_features.light_status) {
+                len += sprintf(p + len, "status:\t\tunknown\n");
+                len += sprintf(p + len, "commands:\ton, off\n");
+        } else {
+                if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
+                        return -EIO;
+                len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
+                len += sprintf(p + len, "commands:\ton, off\n");
+        }
+
+        return len;
+}
+
+static int light_write(char *buf)
+{
+        int cmos_cmd, lght_cmd;
+        char *cmd;
+        int success;
+
+        if (!tp_features.light)
+                return -ENODEV;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (strlencmp(cmd, "on") == 0) {
+                        cmos_cmd = 0x0c;
+                        lght_cmd = 1;
+                } else if (strlencmp(cmd, "off") == 0) {
+                        cmos_cmd = 0x0d;
+                        lght_cmd = 0;
+                } else
+                        return -EINVAL;
+
+                success = cmos_handle ?
+                    acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
+                    acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
+                if (!success)
+                        return -EIO;
+        }
+
+        return 0;
+}
+
+static struct ibm_struct light_driver_data = {
+        .name = "light",
+        .read = light_read,
+        .write = light_write,
+};
+
+/*************************************************************************
+ * Dock subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+
+IBM_HANDLE(dock, root, "\\_SB.GDCK",    /* X30, X31, X40 */
+           "\\_SB.PCI0.DOCK",   /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
+           "\\_SB.PCI0.PCI1.DOCK",      /* all others */
+           "\\_SB.PCI.ISA.SLCE",        /* 570 */
+    );                          /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
+
+/* don't list other alternatives as we install a notify handler on the 570 */
+IBM_HANDLE(pci, root, "\\_SB.PCI");     /* 570 */
+
+static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
+        {
+         .notify = dock_notify,
+         .handle = &dock_handle,
+         .type = ACPI_SYSTEM_NOTIFY,
+        },
+        {
+         .hid = IBM_PCI_HID,
+         .notify = dock_notify,
+         .handle = &pci_handle,
+         .type = ACPI_SYSTEM_NOTIFY,
+        },
+};
+
+static struct ibm_struct dock_driver_data[2] = {
+        {
+         .name = "dock",
+         .read = dock_read,
+         .write = dock_write,
+         .acpi = &ibm_dock_acpidriver[0],
+        },
+        {
+         .name = "dock",
+         .acpi = &ibm_dock_acpidriver[1],
+        },
+};
+
+#define dock_docked() (_sta(dock_handle) & 1)
+
+static int __init dock_init(struct ibm_init_struct *iibm)
+{
+        vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(dock);
+
+        vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
+                str_supported(dock_handle != NULL));
+
+        return (dock_handle)? 0 : 1;
+}
+
+static int __init dock_init2(struct ibm_init_struct *iibm)
+{
+        int dock2_needed;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
+
+        if (dock_driver_data[0].flags.acpi_driver_registered &&
+            dock_driver_data[0].flags.acpi_notify_installed) {
+                IBM_ACPIHANDLE_INIT(pci);
+                dock2_needed = (pci_handle != NULL);
+                vdbg_printk(TPACPI_DBG_INIT,
+                            "dock PCI handler for the TP 570 is %s\n",
+                            str_supported(dock2_needed));
+        } else {
+                vdbg_printk(TPACPI_DBG_INIT,
+                "dock subdriver part 2 not required\n");
+                dock2_needed = 0;
+        }
+
+        return (dock2_needed)? 0 : 1;
+}
+
+static void dock_notify(struct ibm_struct *ibm, u32 event)
+{
+        int docked = dock_docked();
+        int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, IBM_PCI_HID);
+
+        if (event == 1 && !pci) /* 570 */
+                acpi_bus_generate_event(ibm->acpi->device, event, 1);   /* button */
+        else if (event == 1 && pci)     /* 570 */
+                acpi_bus_generate_event(ibm->acpi->device, event, 3);   /* dock */
+        else if (event == 3 && docked)
+                acpi_bus_generate_event(ibm->acpi->device, event, 1);   /* button */
+        else if (event == 3 && !docked)
+                acpi_bus_generate_event(ibm->acpi->device, event, 2);   /* undock */
+        else if (event == 0 && docked)
+                acpi_bus_generate_event(ibm->acpi->device, event, 3);   /* dock */
+        else {
+                printk(IBM_ERR "unknown dock event %d, status %d\n",
+                       event, _sta(dock_handle));
+                acpi_bus_generate_event(ibm->acpi->device, event, 0);   /* unknown */
+        }
+}
+
+static int dock_read(char *p)
+{
+        int len = 0;
+        int docked = dock_docked();
+
+        if (!dock_handle)
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+        else if (!docked)
+                len += sprintf(p + len, "status:\t\tundocked\n");
+        else {
+                len += sprintf(p + len, "status:\t\tdocked\n");
+                len += sprintf(p + len, "commands:\tdock, undock\n");
+        }
+
+        return len;
+}
+
+static int dock_write(char *buf)
+{
+        char *cmd;
+
+        if (!dock_docked())
+                return -ENODEV;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (strlencmp(cmd, "undock") == 0) {
+                        if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
+                            !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
+                                return -EIO;
+                } else if (strlencmp(cmd, "dock") == 0) {
+                        if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
+                                return -EIO;
+                } else
+                        return -EINVAL;
+        }
+
+        return 0;
+}
+
+#endif /* CONFIG_THINKPAD_ACPI_DOCK */
+
+/*************************************************************************
+ * Bay subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST",        /* 570 */
+           "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
+           "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
+           "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
+           );                           /* A21e, R30, R31 */
+IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
+           "_EJ0",              /* all others */
+           );                   /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
+IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV",     /* A3x, R32 */
+           "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
+           );                           /* all others */
+IBM_HANDLE(bay2_ej, bay2, "_EJ3",       /* 600e/x, 770e, A3x */
+           "_EJ0",                      /* 770x */
+           );                           /* all others */
+
+static int __init bay_init(struct ibm_init_struct *iibm)
+{
+        vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(bay);
+        if (bay_handle)
+                IBM_ACPIHANDLE_INIT(bay_ej);
+        IBM_ACPIHANDLE_INIT(bay2);
+        if (bay2_handle)
+                IBM_ACPIHANDLE_INIT(bay2_ej);
+
+        tp_features.bay_status = bay_handle &&
+                acpi_evalf(bay_handle, NULL, "_STA", "qv");
+        tp_features.bay_status2 = bay2_handle &&
+                acpi_evalf(bay2_handle, NULL, "_STA", "qv");
+
+        tp_features.bay_eject = bay_handle && bay_ej_handle &&
+                (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
+        tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
+                (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
+
+        vdbg_printk(TPACPI_DBG_INIT,
+                "bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
+                str_supported(tp_features.bay_status),
+                str_supported(tp_features.bay_eject),
+                str_supported(tp_features.bay_status2),
+                str_supported(tp_features.bay_eject2));
+
+        return (tp_features.bay_status || tp_features.bay_eject ||
+                tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
+}
+
+static void bay_notify(struct ibm_struct *ibm, u32 event)
+{
+        acpi_bus_generate_event(ibm->acpi->device, event, 0);
+}
+
+#define bay_occupied(b) (_sta(b##_handle) & 1)
+
+static int bay_read(char *p)
+{
+        int len = 0;
+        int occupied = bay_occupied(bay);
+        int occupied2 = bay_occupied(bay2);
+        int eject, eject2;
+
+        len += sprintf(p + len, "status:\t\t%s\n",
+                tp_features.bay_status ?
+                        (occupied ? "occupied" : "unoccupied") :
+                                "not supported");
+        if (tp_features.bay_status2)
+                len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
+                               "occupied" : "unoccupied");
+
+        eject = tp_features.bay_eject && occupied;
+        eject2 = tp_features.bay_eject2 && occupied2;
+
+        if (eject && eject2)
+                len += sprintf(p + len, "commands:\teject, eject2\n");
+        else if (eject)
+                len += sprintf(p + len, "commands:\teject\n");
+        else if (eject2)
+                len += sprintf(p + len, "commands:\teject2\n");
+
+        return len;
+}
+
+static int bay_write(char *buf)
+{
+        char *cmd;
+
+        if (!tp_features.bay_eject && !tp_features.bay_eject2)
+                return -ENODEV;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
+                        if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
+                                return -EIO;
+                } else if (tp_features.bay_eject2 &&
+                           strlencmp(cmd, "eject2") == 0) {
+                        if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
+                                return -EIO;
+                } else
+                        return -EINVAL;
+        }
+
+        return 0;
+}
+
+static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
+        .notify = bay_notify,
+        .handle = &bay_handle,
+        .type = ACPI_SYSTEM_NOTIFY,
+};
+
+static struct ibm_struct bay_driver_data = {
+        .name = "bay",
+        .read = bay_read,
+        .write = bay_write,
+        .acpi = &ibm_bay_acpidriver,
+};
+
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+
+/*************************************************************************
+ * CMOS subdriver
+ */
+
+/* sysfs cmos_command -------------------------------------------------- */
+static ssize_t cmos_command_store(struct device *dev,
+                            struct device_attribute *attr,
+                            const char *buf, size_t count)
+{
+        unsigned long cmos_cmd;
+        int res;
+
+        if (parse_strtoul(buf, 21, &cmos_cmd))
+                return -EINVAL;
+
+        res = issue_thinkpad_cmos_command(cmos_cmd);
+        return (res)? res : count;
+}
+
+static struct device_attribute dev_attr_cmos_command =
+        __ATTR(cmos_command, S_IWUSR, NULL, cmos_command_store);
+
+/* --------------------------------------------------------------------- */
+
+static int __init cmos_init(struct ibm_init_struct *iibm)
+{
+        int res;
+
+        vdbg_printk(TPACPI_DBG_INIT,
+                "initializing cmos commands subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(cmos);
+
+        vdbg_printk(TPACPI_DBG_INIT, "cmos commands are %s\n",
+                str_supported(cmos_handle != NULL));
+
+        res = device_create_file(&tpacpi_pdev->dev, &dev_attr_cmos_command);
+        if (res)
+                return res;
+
+        return (cmos_handle)? 0 : 1;
+}
+
+static void cmos_exit(void)
+{
+        device_remove_file(&tpacpi_pdev->dev, &dev_attr_cmos_command);
+}
+
+static int cmos_read(char *p)
+{
+        int len = 0;
+
+        /* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+           R30, R31, T20-22, X20-21 */
+        if (!cmos_handle)
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+        else {
+                len += sprintf(p + len, "status:\t\tsupported\n");
+                len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
+        }
+
+        return len;
+}
+
+static int cmos_write(char *buf)
+{
+        char *cmd;
+        int cmos_cmd, res;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
+                    cmos_cmd >= 0 && cmos_cmd <= 21) {
+                        /* cmos_cmd set */
+                } else
+                        return -EINVAL;
+
+                res = issue_thinkpad_cmos_command(cmos_cmd);
+                if (res)
+                        return res;
+        }
+
+        return 0;
+}
+
+static struct ibm_struct cmos_driver_data = {
+        .name = "cmos",
+        .read = cmos_read,
+        .write = cmos_write,
+        .exit = cmos_exit,
+};
+
+/*************************************************************************
+ * LED subdriver
+ */
+
+static enum led_access_mode led_supported;
+
+IBM_HANDLE(led, ec, "SLED",     /* 570 */
+           "SYSL",              /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+           "LED",               /* all others */
+           );                   /* R30, R31 */
+
+static int __init led_init(struct ibm_init_struct *iibm)
+{
+        vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(led);
+
+        if (!led_handle)
+                /* led not supported on R30, R31 */
+                led_supported = TPACPI_LED_NONE;
+        else if (strlencmp(led_path, "SLED") == 0)
+                /* 570 */
+                led_supported = TPACPI_LED_570;
+        else if (strlencmp(led_path, "SYSL") == 0)
+                /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+                led_supported = TPACPI_LED_OLD;
+        else
+                /* all others */
+                led_supported = TPACPI_LED_NEW;
+
+        vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
+                str_supported(led_supported), led_supported);
+
+        return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+}
+
+#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
+
+static int led_read(char *p)
+{
+        int len = 0;
+
+        if (!led_supported) {
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+                return len;
+        }
+        len += sprintf(p + len, "status:\t\tsupported\n");
+
+        if (led_supported == TPACPI_LED_570) {
+                /* 570 */
+                int i, status;
+                for (i = 0; i < 8; i++) {
+                        if (!acpi_evalf(ec_handle,
+                                        &status, "GLED", "dd", 1 << i))
+                                return -EIO;
+                        len += sprintf(p + len, "%d:\t\t%s\n",
+                                       i, led_status(status));
+                }
+        }
+
+        len += sprintf(p + len, "commands:\t"
+                       "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+
+        return len;
+}
+
+/* off, on, blink */
+static const int led_sled_arg1[] = { 0, 1, 3 };
+static const int led_exp_hlbl[] = { 0, 0, 1 };  /* led# * */
+static const int led_exp_hlcl[] = { 0, 1, 1 };  /* led# * */
+static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
+
+static int led_write(char *buf)
+{
+        char *cmd;
+        int led, ind, ret;
+
+        if (!led_supported)
+                return -ENODEV;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+                        return -EINVAL;
+
+                if (strstr(cmd, "off")) {
+                        ind = 0;
+                } else if (strstr(cmd, "on")) {
+                        ind = 1;
+                } else if (strstr(cmd, "blink")) {
+                        ind = 2;
+                } else
+                        return -EINVAL;
+
+                if (led_supported == TPACPI_LED_570) {
+                        /* 570 */
+                        led = 1 << led;
+                        if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+                                        led, led_sled_arg1[ind]))
+                                return -EIO;
+                } else if (led_supported == TPACPI_LED_OLD) {
+                        /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
+                        led = 1 << led;
+                        ret = ec_write(TPACPI_LED_EC_HLMS, led);
+                        if (ret >= 0)
+                                ret =
+                                    ec_write(TPACPI_LED_EC_HLBL,
+                                             led * led_exp_hlbl[ind]);
+                        if (ret >= 0)
+                                ret =
+                                    ec_write(TPACPI_LED_EC_HLCL,
+                                             led * led_exp_hlcl[ind]);
+                        if (ret < 0)
+                                return ret;
+                } else {
+                        /* all others */
+                        if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+                                        led, led_led_arg1[ind]))
+                                return -EIO;
+                }
+        }
+
+        return 0;
+}
+
+static struct ibm_struct led_driver_data = {
+        .name = "led",
+        .read = led_read,
+        .write = led_write,
+};
+
+/*************************************************************************
+ * Beep subdriver
+ */
+
+IBM_HANDLE(beep, ec, "BEEP");   /* all except R30, R31 */
+
+static int __init beep_init(struct ibm_init_struct *iibm)
+{
+        vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
+
+        IBM_ACPIHANDLE_INIT(beep);
+
+        vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
+                str_supported(beep_handle != NULL));
+
+        return (beep_handle)? 0 : 1;
+}
+
+static int beep_read(char *p)
+{
+        int len = 0;
+
+        if (!beep_handle)
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+        else {
+                len += sprintf(p + len, "status:\t\tsupported\n");
+                len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
+        }
+
+        return len;
+}
+
+static int beep_write(char *buf)
+{
+        char *cmd;
+        int beep_cmd;
+
+        if (!beep_handle)
+                return -ENODEV;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
+                    beep_cmd >= 0 && beep_cmd <= 17) {
+                        /* beep_cmd set */
+                } else
+                        return -EINVAL;
+                if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
+                        return -EIO;
+        }
+
+        return 0;
+}
+
+static struct ibm_struct beep_driver_data = {
+        .name = "beep",
+        .read = beep_read,
+        .write = beep_write,
+};
+
+/*************************************************************************
+ * Thermal subdriver
+ */
+
+static enum thermal_access_mode thermal_read_mode;
+
+/* sysfs temp##_input -------------------------------------------------- */
+
+static ssize_t thermal_temp_input_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        struct sensor_device_attribute *sensor_attr =
+                                        to_sensor_dev_attr(attr);
+        int idx = sensor_attr->index;
+        s32 value;
+        int res;
+
+        res = thermal_get_sensor(idx, &value);
+        if (res)
+                return res;
+        if (value == TP_EC_THERMAL_TMP_NA * 1000)
+                return -ENXIO;
+
+        return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+#define THERMAL_SENSOR_ATTR_TEMP(_idxA, _idxB) \
+         SENSOR_ATTR(temp##_idxA##_input, S_IRUGO, thermal_temp_input_show, NULL, _idxB)
+
+static struct sensor_device_attribute sensor_dev_attr_thermal_temp_input[] = {
+        THERMAL_SENSOR_ATTR_TEMP(1, 0),
+        THERMAL_SENSOR_ATTR_TEMP(2, 1),
+        THERMAL_SENSOR_ATTR_TEMP(3, 2),
+        THERMAL_SENSOR_ATTR_TEMP(4, 3),
+        THERMAL_SENSOR_ATTR_TEMP(5, 4),
+        THERMAL_SENSOR_ATTR_TEMP(6, 5),
+        THERMAL_SENSOR_ATTR_TEMP(7, 6),
+        THERMAL_SENSOR_ATTR_TEMP(8, 7),
+        THERMAL_SENSOR_ATTR_TEMP(9, 8),
+        THERMAL_SENSOR_ATTR_TEMP(10, 9),
+        THERMAL_SENSOR_ATTR_TEMP(11, 10),
+        THERMAL_SENSOR_ATTR_TEMP(12, 11),
+        THERMAL_SENSOR_ATTR_TEMP(13, 12),
+        THERMAL_SENSOR_ATTR_TEMP(14, 13),
+        THERMAL_SENSOR_ATTR_TEMP(15, 14),
+        THERMAL_SENSOR_ATTR_TEMP(16, 15),
+};
+
+#define THERMAL_ATTRS(X) \
+        &sensor_dev_attr_thermal_temp_input[X].dev_attr.attr
+
+static struct attribute *thermal_temp_input_attr[] = {
+        THERMAL_ATTRS(8),
+        THERMAL_ATTRS(9),
+        THERMAL_ATTRS(10),
+        THERMAL_ATTRS(11),
+        THERMAL_ATTRS(12),
+        THERMAL_ATTRS(13),
+        THERMAL_ATTRS(14),
+        THERMAL_ATTRS(15),
+        THERMAL_ATTRS(0),
+        THERMAL_ATTRS(1),
+        THERMAL_ATTRS(2),
+        THERMAL_ATTRS(3),
+        THERMAL_ATTRS(4),
+        THERMAL_ATTRS(5),
+        THERMAL_ATTRS(6),
+        THERMAL_ATTRS(7),
+        NULL
+};
+
+static const struct attribute_group thermal_temp_input16_group = {
+        .attrs = thermal_temp_input_attr
+};
+
+static const struct attribute_group thermal_temp_input8_group = {
+        .attrs = &thermal_temp_input_attr[8]
+};
+
+#undef THERMAL_SENSOR_ATTR_TEMP
+#undef THERMAL_ATTRS
+
+/* --------------------------------------------------------------------- */
+
+static int __init thermal_init(struct ibm_init_struct *iibm)
+{
+        u8 t, ta1, ta2;
+        int i;
+        int acpi_tmp7;
+        int res;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing thermal subdriver\n");
+
+        acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+
+        if (ibm_thinkpad_ec_found && experimental) {
+                /*
+                 * Direct EC access mode: sensors at registers
+                 * 0x78-0x7F, 0xC0-0xC7.  Registers return 0x00 for
+                 * non-implemented, thermal sensors return 0x80 when
+                 * not available
+                 */
+
+                ta1 = ta2 = 0;
+                for (i = 0; i < 8; i++) {
+                        if (acpi_ec_read(TP_EC_THERMAL_TMP0 + i, &t)) {
+                                ta1 |= t;
+                        } else {
+                                ta1 = 0;
+                                break;
+                        }
+                        if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
+                                ta2 |= t;
+                        } else {
+                                ta1 = 0;
+                                break;
+                        }
+                }
+                if (ta1 == 0) {
+                        /* This is sheer paranoia, but we handle it anyway */
+                        if (acpi_tmp7) {
+                                printk(IBM_ERR
+                                       "ThinkPad ACPI EC access misbehaving, "
+                                       "falling back to ACPI TMPx access mode\n");
+                                thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
+                        } else {
+                                printk(IBM_ERR
+                                       "ThinkPad ACPI EC access misbehaving, "
+                                       "disabling thermal sensors access\n");
+                                thermal_read_mode = TPACPI_THERMAL_NONE;
+                        }
+                } else {
+                        thermal_read_mode =
+                            (ta2 != 0) ?
+                            TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
+                }
+        } else if (acpi_tmp7) {
+                if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
+                        /* 600e/x, 770e, 770x */
+                        thermal_read_mode = TPACPI_THERMAL_ACPI_UPDT;
+                } else {
+                        /* Standard ACPI TMPx access, max 8 sensors */
+                        thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
+                }
+        } else {
+                /* temperatures not supported on 570, G4x, R30, R31, R32 */
+                thermal_read_mode = TPACPI_THERMAL_NONE;
+        }
+
+        vdbg_printk(TPACPI_DBG_INIT, "thermal is %s, mode %d\n",
+                str_supported(thermal_read_mode != TPACPI_THERMAL_NONE),
+                thermal_read_mode);
+
+        switch(thermal_read_mode) {
+        case TPACPI_THERMAL_TPEC_16:
+                res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+                                &thermal_temp_input16_group);
+                if (res)
+                        return res;
+                break;
+        case TPACPI_THERMAL_TPEC_8:
+        case TPACPI_THERMAL_ACPI_TMP07:
+        case TPACPI_THERMAL_ACPI_UPDT:
+                res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+                                &thermal_temp_input8_group);
+                if (res)
+                        return res;
+                break;
+        case TPACPI_THERMAL_NONE:
+        default:
+                return 1;
+        }
+
+        return 0;
+}
+
+static void thermal_exit(void)
+{
+        switch(thermal_read_mode) {
+        case TPACPI_THERMAL_TPEC_16:
+                sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+                                   &thermal_temp_input16_group);
+                break;
+        case TPACPI_THERMAL_TPEC_8:
+        case TPACPI_THERMAL_ACPI_TMP07:
+        case TPACPI_THERMAL_ACPI_UPDT:
+                sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+                                   &thermal_temp_input16_group);
+                break;
+        case TPACPI_THERMAL_NONE:
+        default:
+                break;
+        }
+}
+
+/* idx is zero-based */
+static int thermal_get_sensor(int idx, s32 *value)
+{
+        int t;
+        s8 tmp;
+        char tmpi[5];
+
+        t = TP_EC_THERMAL_TMP0;
+
+        switch (thermal_read_mode) {
+#if TPACPI_MAX_THERMAL_SENSORS >= 16
+        case TPACPI_THERMAL_TPEC_16:
+                if (idx >= 8 && idx <= 15) {
+                        t = TP_EC_THERMAL_TMP8;
+                        idx -= 8;
+                }
+                /* fallthrough */
+#endif
+        case TPACPI_THERMAL_TPEC_8:
+                if (idx <= 7) {
+                        if (!acpi_ec_read(t + idx, &tmp))
+                                return -EIO;
+                        *value = tmp * 1000;
+                        return 0;
+                }
+                break;
+
+        case TPACPI_THERMAL_ACPI_UPDT:
+                if (idx <= 7) {
+                        snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
+                        if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
+                                return -EIO;
+                        if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+                                return -EIO;
+                        *value = (t - 2732) * 100;
+                        return 0;
+                }
+                break;
+
+        case TPACPI_THERMAL_ACPI_TMP07:
+                if (idx <= 7) {
+                        snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx);
+                        if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+                                return -EIO;
+                        *value = t * 1000;
+                        return 0;
+                }
+                break;
+
+        case TPACPI_THERMAL_NONE:
+        default:
+                return -ENOSYS;
+        }
+
+        return -EINVAL;
+}
+
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
+{
+        int res, i;
+        int n;
+
+        n = 8;
+        i = 0;
+
+        if (!s)
+                return -EINVAL;
+
+        if (thermal_read_mode == TPACPI_THERMAL_TPEC_16)
+                n = 16;
+
+        for(i = 0 ; i < n; i++) {
+                res = thermal_get_sensor(i, &s->temp[i]);
+                if (res)
+                        return res;
+        }
+
+        return n;
+}
+
+static int thermal_read(char *p)
+{
+        int len = 0;
+        int n, i;
+        struct ibm_thermal_sensors_struct t;
+
+        n = thermal_get_sensors(&t);
+        if (unlikely(n < 0))
+                return n;
+
+        len += sprintf(p + len, "temperatures:\t");
+
+        if (n > 0) {
+                for (i = 0; i < (n - 1); i++)
+                        len += sprintf(p + len, "%d ", t.temp[i] / 1000);
+                len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
+        } else
+                len += sprintf(p + len, "not supported\n");
+
+        return len;
+}
+
+static struct ibm_struct thermal_driver_data = {
+        .name = "thermal",
+        .read = thermal_read,
+        .exit = thermal_exit,
+};
+
+/*************************************************************************
+ * EC Dump subdriver
+ */
+
+static u8 ecdump_regs[256];
+
+static int ecdump_read(char *p)
+{
+        int len = 0;
+        int i, j;
+        u8 v;
+
+        len += sprintf(p + len, "EC      "
+                       " +00 +01 +02 +03 +04 +05 +06 +07"
+                       " +08 +09 +0a +0b +0c +0d +0e +0f\n");
+        for (i = 0; i < 256; i += 16) {
+                len += sprintf(p + len, "EC 0x%02x:", i);
+                for (j = 0; j < 16; j++) {
+                        if (!acpi_ec_read(i + j, &v))
+                                break;
+                        if (v != ecdump_regs[i + j])
+                                len += sprintf(p + len, " *%02x", v);
+                        else
+                                len += sprintf(p + len, "  %02x", v);
+                        ecdump_regs[i + j] = v;
+                }
+                len += sprintf(p + len, "\n");
+                if (j != 16)
+                        break;
+        }
+
+        /* These are way too dangerous to advertise openly... */
+#if 0
+        len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
+                       " (<offset> is 00-ff, <value> is 00-ff)\n");
+        len += sprintf(p + len, "commands:\t0x<offset> <value>  "
+                       " (<offset> is 00-ff, <value> is 0-255)\n");
+#endif
+        return len;
+}
+
+static int ecdump_write(char *buf)
+{
+        char *cmd;
+        int i, v;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
+                        /* i and v set */
+                } else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
+                        /* i and v set */
+                } else
+                        return -EINVAL;
+                if (i >= 0 && i < 256 && v >= 0 && v < 256) {
+                        if (!acpi_ec_write(i, v))
+                                return -EIO;
+                } else
+                        return -EINVAL;
+        }
+
+        return 0;
+}
+
+static struct ibm_struct ecdump_driver_data = {
+        .name = "ecdump",
+        .read = ecdump_read,
+        .write = ecdump_write,
+        .flags.experimental = 1,
+};
+
+/*************************************************************************
+ * Backlight/brightness subdriver
+ */
+
+static struct backlight_device *ibm_backlight_device = NULL;
+
+static struct backlight_ops ibm_backlight_data = {
+        .get_brightness = brightness_get,
+        .update_status  = brightness_update_status,
+};
+
+static int __init brightness_init(struct ibm_init_struct *iibm)
+{
+        int b;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
+
+        b = brightness_get(NULL);
+        if (b < 0)
+                return b;
+
+        ibm_backlight_device = backlight_device_register(
+                                        TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
+                                        &ibm_backlight_data);
+        if (IS_ERR(ibm_backlight_device)) {
+                printk(IBM_ERR "Could not register backlight device\n");
+                return PTR_ERR(ibm_backlight_device);
+        }
+        vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n");
+
+        ibm_backlight_device->props.max_brightness = 7;
+        ibm_backlight_device->props.brightness = b;
+        backlight_update_status(ibm_backlight_device);
+
+        return 0;
+}
+
+static void brightness_exit(void)
+{
+        if (ibm_backlight_device) {
+                vdbg_printk(TPACPI_DBG_EXIT,
+                            "calling backlight_device_unregister()\n");
+                backlight_device_unregister(ibm_backlight_device);
+                ibm_backlight_device = NULL;
+        }
+}
+
+static int brightness_update_status(struct backlight_device *bd)
+{
+        return brightness_set(
+                (bd->props.fb_blank == FB_BLANK_UNBLANK &&
+                 bd->props.power == FB_BLANK_UNBLANK) ?
+                                bd->props.brightness : 0);
+}
+
+static int brightness_get(struct backlight_device *bd)
+{
+        u8 level;
+        if (!acpi_ec_read(brightness_offset, &level))
+                return -EIO;
+
+        level &= 0x7;
+
+        return level;
+}
+
+static int brightness_set(int value)
+{
+        int cmos_cmd, inc, i;
+        int current_value = brightness_get(NULL);
+
+        value &= 7;
+
+        cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN;
+        inc = value > current_value ? 1 : -1;
+        for (i = current_value; i != value; i += inc) {
+                if (issue_thinkpad_cmos_command(cmos_cmd))
+                        return -EIO;
+                if (!acpi_ec_write(brightness_offset, i + inc))
+                        return -EIO;
+        }
+
+        return 0;
+}
+
+static int brightness_read(char *p)
+{
+        int len = 0;
+        int level;
+
+        if ((level = brightness_get(NULL)) < 0) {
+                len += sprintf(p + len, "level:\t\tunreadable\n");
+        } else {
+                len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
+                len += sprintf(p + len, "commands:\tup, down\n");
+                len += sprintf(p + len, "commands:\tlevel <level>"
+                               " (<level> is 0-7)\n");
+        }
+
+        return len;
+}
+
+static int brightness_write(char *buf)
+{
+        int level;
+        int new_level;
+        char *cmd;
+
+        while ((cmd = next_cmd(&buf))) {
+                if ((level = brightness_get(NULL)) < 0)
+                        return level;
+                level &= 7;
+
+                if (strlencmp(cmd, "up") == 0) {
+                        new_level = level == 7 ? 7 : level + 1;
+                } else if (strlencmp(cmd, "down") == 0) {
+                        new_level = level == 0 ? 0 : level - 1;
+                } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
+                           new_level >= 0 && new_level <= 7) {
+                        /* new_level set */
+                } else
+                        return -EINVAL;
+
+                brightness_set(new_level);
+        }
+
+        return 0;
+}
+
+static struct ibm_struct brightness_driver_data = {
+        .name = "brightness",
+        .read = brightness_read,
+        .write = brightness_write,
+        .exit = brightness_exit,
+};
+
+/*************************************************************************
+ * Volume subdriver
+ */
+
+static int volume_read(char *p)
+{
+        int len = 0;
+        u8 level;
+
+        if (!acpi_ec_read(volume_offset, &level)) {
+                len += sprintf(p + len, "level:\t\tunreadable\n");
+        } else {
+                len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
+                len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
+                len += sprintf(p + len, "commands:\tup, down, mute\n");
+                len += sprintf(p + len, "commands:\tlevel <level>"
+                               " (<level> is 0-15)\n");
+        }
+
+        return len;
+}
+
+static int volume_write(char *buf)
+{
+        int cmos_cmd, inc, i;
+        u8 level, mute;
+        int new_level, new_mute;
+        char *cmd;
+
+        while ((cmd = next_cmd(&buf))) {
+                if (!acpi_ec_read(volume_offset, &level))
+                        return -EIO;
+                new_mute = mute = level & 0x40;
+                new_level = level = level & 0xf;
+
+                if (strlencmp(cmd, "up") == 0) {
+                        if (mute)
+                                new_mute = 0;
+                        else
+                                new_level = level == 15 ? 15 : level + 1;
+                } else if (strlencmp(cmd, "down") == 0) {
+                        if (mute)
+                                new_mute = 0;
+                        else
+                                new_level = level == 0 ? 0 : level - 1;
+                } else if (sscanf(cmd, "level %d", &new_level) == 1 &&
+                           new_level >= 0 && new_level <= 15) {
+                        /* new_level set */
+                } else if (strlencmp(cmd, "mute") == 0) {
+                        new_mute = 0x40;
+                } else
+                        return -EINVAL;
+
+                if (new_level != level) {       /* mute doesn't change */
+                        cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN;
+                        inc = new_level > level ? 1 : -1;
+
+                        if (mute && (issue_thinkpad_cmos_command(cmos_cmd) ||
+                                     !acpi_ec_write(volume_offset, level)))
+                                return -EIO;
+
+                        for (i = level; i != new_level; i += inc)
+                                if (issue_thinkpad_cmos_command(cmos_cmd) ||
+                                    !acpi_ec_write(volume_offset, i + inc))
+                                        return -EIO;
+
+                        if (mute && (issue_thinkpad_cmos_command(TP_CMOS_VOLUME_MUTE) ||
+                                     !acpi_ec_write(volume_offset,
+                                                    new_level + mute)))
+                                return -EIO;
+                }
+
+                if (new_mute != mute) { /* level doesn't change */
+                        cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP;
+
+                        if (issue_thinkpad_cmos_command(cmos_cmd) ||
+                            !acpi_ec_write(volume_offset, level + new_mute))
+                                return -EIO;
+                }
+        }
+
+        return 0;
+}
+
+static struct ibm_struct volume_driver_data = {
+        .name = "volume",
+        .read = volume_read,
+        .write = volume_write,
+};
+
+/*************************************************************************
+ * Fan subdriver
+ */
+
+/*
+ * FAN ACCESS MODES
+ *
+ * TPACPI_FAN_RD_ACPI_GFAN:
+ *      ACPI GFAN method: returns fan level
+ *
+ *      see TPACPI_FAN_WR_ACPI_SFAN
+ *      EC 0x2f (HFSP) not available if GFAN exists
+ *
+ * TPACPI_FAN_WR_ACPI_SFAN:
+ *      ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
+ *
+ *      EC 0x2f (HFSP) might be available *for reading*, but do not use
+ *      it for writing.
+ *
+ * TPACPI_FAN_WR_TPEC:
+ *      ThinkPad EC register 0x2f (HFSP): fan control loop mode
+ *      Supported on almost all ThinkPads
+ *
+ *      Fan speed changes of any sort (including those caused by the
+ *      disengaged mode) are usually done slowly by the firmware as the
+ *      maximum ammount of fan duty cycle change per second seems to be
+ *      limited.
+ *
+ *      Reading is not available if GFAN exists.
+ *      Writing is not available if SFAN exists.
+ *
+ *      Bits
+ *       7      automatic mode engaged;
+ *              (default operation mode of the ThinkPad)
+ *              fan level is ignored in this mode.
+ *       6      full speed mode (takes precedence over bit 7);
+ *              not available on all thinkpads.  May disable
+ *              the tachometer while the fan controller ramps up
+ *              the speed (which can take up to a few *minutes*).
+ *              Speeds up fan to 100% duty-cycle, which is far above
+ *              the standard RPM levels.  It is not impossible that
+ *              it could cause hardware damage.
+ *      5-3     unused in some models.  Extra bits for fan level
+ *              in others, but still useless as all values above
+ *              7 map to the same speed as level 7 in these models.
+ *      2-0     fan level (0..7 usually)
+ *                      0x00 = stop
+ *                      0x07 = max (set when temperatures critical)
+ *              Some ThinkPads may have other levels, see
+ *              TPACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
+ *
+ *      FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
+ *      boot. Apparently the EC does not intialize it, so unless ACPI DSDT
+ *      does so, its initial value is meaningless (0x07).
+ *
+ *      For firmware bugs, refer to:
+ *      http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ *      ----
+ *
+ *      ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
+ *      Main fan tachometer reading (in RPM)
+ *
+ *      This register is present on all ThinkPads with a new-style EC, and
+ *      it is known not to be present on the A21m/e, and T22, as there is
+ *      something else in offset 0x84 according to the ACPI DSDT.  Other
+ *      ThinkPads from this same time period (and earlier) probably lack the
+ *      tachometer as well.
+ *
+ *      Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
+ *      was never fixed by IBM to report the EC firmware version string
+ *      probably support the tachometer (like the early X models), so
+ *      detecting it is quite hard.  We need more data to know for sure.
+ *
+ *      FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
+ *      might result.
+ *
+ *      FIRMWARE BUG: may go stale while the EC is switching to full speed
+ *      mode.
+ *
+ *      For firmware bugs, refer to:
+ *      http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * TPACPI_FAN_WR_ACPI_FANS:
+ *      ThinkPad X31, X40, X41.  Not available in the X60.
+ *
+ *      FANS ACPI handle: takes three arguments: low speed, medium speed,
+ *      high speed.  ACPI DSDT seems to map these three speeds to levels
+ *      as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
+ *      (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
+ *
+ *      The speeds are stored on handles
+ *      (FANA:FAN9), (FANC:FANB), (FANE:FAND).
+ *
+ *      There are three default speed sets, acessible as handles:
+ *      FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
+ *
+ *      ACPI DSDT switches which set is in use depending on various
+ *      factors.
+ *
+ *      TPACPI_FAN_WR_TPEC is also available and should be used to
+ *      command the fan.  The X31/X40/X41 seems to have 8 fan levels,
+ *      but the ACPI tables just mention level 7.
+ */
+
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
+
+static u8 fan_control_initial_status;
+static u8 fan_control_desired_level;
+
+static void fan_watchdog_fire(struct work_struct *ignored);
+static int fan_watchdog_maxinterval;
+static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
+
+IBM_HANDLE(fans, ec, "FANS");   /* X31, X40, X41 */
+IBM_HANDLE(gfan, ec, "GFAN",    /* 570 */
+           "\\FSPD",            /* 600e/x, 770e, 770x */
+           );                   /* all others */
+IBM_HANDLE(sfan, ec, "SFAN",    /* 570 */
+           "JFNS",              /* 770x-JL */
+           );                   /* all others */
+
+/*
+ * SYSFS fan layout: hwmon compatible (device)
+ *
+ * pwm*_enable:
+ *      0: "disengaged" mode
+ *      1: manual mode
+ *      2: native EC "auto" mode (recommended, hardware default)
+ *
+ * pwm*: set speed in manual mode, ignored otherwise.
+ *      0 is level 0; 255 is level 7. Intermediate points done with linear
+ *      interpolation.
+ *
+ * fan*_input: tachometer reading, RPM
+ *
+ *
+ * SYSFS fan layout: extensions
+ *
+ * fan_watchdog (driver):
+ *      fan watchdog interval in seconds, 0 disables (default), max 120
+ */
+
+/* sysfs fan pwm1_enable ----------------------------------------------- */
+static ssize_t fan_pwm1_enable_show(struct device *dev,
+                                    struct device_attribute *attr,
+                                    char *buf)
+{
+        int res, mode;
+        u8 status;
+
+        res = fan_get_status_safe(&status);
+        if (res)
+                return res;
+
+        if (unlikely(tp_features.fan_ctrl_status_undef)) {
+                if (status != fan_control_initial_status) {
+                        tp_features.fan_ctrl_status_undef = 0;
+                } else {
+                        /* Return most likely status. In fact, it
+                         * might be the only possible status */
+                        status = TP_EC_FAN_AUTO;
+                }
+        }
+
+        if (status & TP_EC_FAN_FULLSPEED) {
+                mode = 0;
+        } else if (status & TP_EC_FAN_AUTO) {
+                mode = 2;
+        } else
+                mode = 1;
+
+        return snprintf(buf, PAGE_SIZE, "%d\n", mode);
+}
+
+static ssize_t fan_pwm1_enable_store(struct device *dev,
+                                     struct device_attribute *attr,
+                                     const char *buf, size_t count)
+{
+        unsigned long t;
+        int res, level;
+
+        if (parse_strtoul(buf, 2, &t))
+                return -EINVAL;
+
+        switch (t) {
+        case 0:
+                level = TP_EC_FAN_FULLSPEED;
+                break;
+        case 1:
+                level = TPACPI_FAN_LAST_LEVEL;
+                break;
+        case 2:
+                level = TP_EC_FAN_AUTO;
+                break;
+        case 3:
+                /* reserved for software-controlled auto mode */
+                return -ENOSYS;
+        default:
+                return -EINVAL;
+        }
+
+        res = fan_set_level_safe(level);
+        if (res == -ENXIO)
+                return -EINVAL;
+        else if (res < 0)
+                return res;
+
+        fan_watchdog_reset();
+
+        return count;
+}
+
+static struct device_attribute dev_attr_fan_pwm1_enable =
+        __ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+                fan_pwm1_enable_show, fan_pwm1_enable_store);
+
+/* sysfs fan pwm1 ------------------------------------------------------ */
+static ssize_t fan_pwm1_show(struct device *dev,
+                             struct device_attribute *attr,
+                             char *buf)
+{
+        int res;
+        u8 status;
+
+        res = fan_get_status_safe(&status);
+        if (res)
+                return res;
+
+        if (unlikely(tp_features.fan_ctrl_status_undef)) {
+                if (status != fan_control_initial_status) {
+                        tp_features.fan_ctrl_status_undef = 0;
+                } else {
+                        status = TP_EC_FAN_AUTO;
+                }
+        }
+
+        if ((status &
+             (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0)
+                status = fan_control_desired_level;
+
+        if (status > 7)
+                status = 7;
+
+        return snprintf(buf, PAGE_SIZE, "%u\n", (status * 255) / 7);
+}
+
+static ssize_t fan_pwm1_store(struct device *dev,
+                              struct device_attribute *attr,
+                              const char *buf, size_t count)
+{
+        unsigned long s;
+        int rc;
+        u8 status, newlevel;
+
+        if (parse_strtoul(buf, 255, &s))
+                return -EINVAL;
+
+        /* scale down from 0-255 to 0-7 */
+        newlevel = (s >> 5) & 0x07;
+
+        rc = mutex_lock_interruptible(&fan_mutex);
+        if (rc < 0)
+                return rc;
+
+        rc = fan_get_status(&status);
+        if (!rc && (status &
+                    (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) {
+                rc = fan_set_level(newlevel);
+                if (rc == -ENXIO)
+                        rc = -EINVAL;
+                else if (!rc) {
+                        fan_update_desired_level(newlevel);
+                        fan_watchdog_reset();
+                }
+        }
+
+        mutex_unlock(&fan_mutex);
+        return (rc)? rc : count;
+}
+
+static struct device_attribute dev_attr_fan_pwm1 =
+        __ATTR(pwm1, S_IWUSR | S_IRUGO,
+                fan_pwm1_show, fan_pwm1_store);
+
+/* sysfs fan fan1_input ------------------------------------------------ */
+static ssize_t fan_fan1_input_show(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+        int res;
+        unsigned int speed;
+
+        res = fan_get_speed(&speed);
+        if (res < 0)
+                return res;
+
+        return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan1_input =
+        __ATTR(fan1_input, S_IRUGO,
+                fan_fan1_input_show, NULL);
+
+/* sysfs fan fan_watchdog (driver) ------------------------------------- */
+static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
+                                     char *buf)
+{
+        return snprintf(buf, PAGE_SIZE, "%u\n", fan_watchdog_maxinterval);
+}
+
+static ssize_t fan_fan_watchdog_store(struct device_driver *drv,
+                                      const char *buf, size_t count)
+{
+        unsigned long t;
+
+        if (parse_strtoul(buf, 120, &t))
+                return -EINVAL;
+
+        if (!fan_control_allowed)
+                return -EPERM;
+
+        fan_watchdog_maxinterval = t;
+        fan_watchdog_reset();
+
+        return count;
+}
+
+static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
+                fan_fan_watchdog_show, fan_fan_watchdog_store);
+
+/* --------------------------------------------------------------------- */
+static struct attribute *fan_attributes[] = {
+        &dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
+        &dev_attr_fan_fan1_input.attr,
+        NULL
+};
+
+static const struct attribute_group fan_attr_group = {
+        .attrs = fan_attributes,
+};
+
+static int __init fan_init(struct ibm_init_struct *iibm)
+{
+        int rc;
+
+        vdbg_printk(TPACPI_DBG_INIT, "initializing fan subdriver\n");
+
+        mutex_init(&fan_mutex);
+        fan_status_access_mode = TPACPI_FAN_NONE;
+        fan_control_access_mode = TPACPI_FAN_WR_NONE;
+        fan_control_commands = 0;
+        fan_watchdog_maxinterval = 0;
+        tp_features.fan_ctrl_status_undef = 0;
+        fan_control_desired_level = 7;
+
+        IBM_ACPIHANDLE_INIT(fans);
+        IBM_ACPIHANDLE_INIT(gfan);
+        IBM_ACPIHANDLE_INIT(sfan);
+
+        if (gfan_handle) {
+                /* 570, 600e/x, 770e, 770x */
+                fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
+        } else {
+                /* all other ThinkPads: note that even old-style
+                 * ThinkPad ECs supports the fan control register */
+                if (likely(acpi_ec_read(fan_status_offset,
+                                        &fan_control_initial_status))) {
+                        fan_status_access_mode = TPACPI_FAN_RD_TPEC;
+
+                        /* In some ThinkPads, neither the EC nor the ACPI
+                         * DSDT initialize the fan status, and it ends up
+                         * being set to 0x07 when it *could* be either
+                         * 0x07 or 0x80.
+                         *
+                         * Enable for TP-1Y (T43), TP-78 (R51e),
+                         * TP-76 (R52), TP-70 (T43, R52), which are known
+                         * to be buggy. */
+                        if (fan_control_initial_status == 0x07 &&
+                            ibm_thinkpad_ec_found &&
+                            ((ibm_thinkpad_ec_found[0] == '1' &&
+                              ibm_thinkpad_ec_found[1] == 'Y') ||
+                             (ibm_thinkpad_ec_found[0] == '7' &&
+                              (ibm_thinkpad_ec_found[1] == '6' ||
+                               ibm_thinkpad_ec_found[1] == '8' ||
+                               ibm_thinkpad_ec_found[1] == '0'))
+                            )) {
+                                printk(IBM_NOTICE
+                                       "fan_init: initial fan status is "
+                                       "unknown, assuming it is in auto "
+                                       "mode\n");
+                                tp_features.fan_ctrl_status_undef = 1;
+                        }
+                } else {
+                        printk(IBM_ERR
+                               "ThinkPad ACPI EC access misbehaving, "
+                               "fan status and control unavailable\n");
+                        return 1;
+                }
+        }
+
+        if (sfan_handle) {
+                /* 570, 770x-JL */
+                fan_control_access_mode = TPACPI_FAN_WR_ACPI_SFAN;
+                fan_control_commands |=
+                    TPACPI_FAN_CMD_LEVEL | TPACPI_FAN_CMD_ENABLE;
+        } else {
+                if (!gfan_handle) {
+                        /* gfan without sfan means no fan control */
+                        /* all other models implement TP EC 0x2f control */
+
+                        if (fans_handle) {
+                                /* X31, X40, X41 */
+                                fan_control_access_mode =
+                                    TPACPI_FAN_WR_ACPI_FANS;
+                                fan_control_commands |=
+                                    TPACPI_FAN_CMD_SPEED |
+                                    TPACPI_FAN_CMD_LEVEL |
+                                    TPACPI_FAN_CMD_ENABLE;
+                        } else {
+                                fan_control_access_mode = TPACPI_FAN_WR_TPEC;
+                                fan_control_commands |=
+                                    TPACPI_FAN_CMD_LEVEL |
+                                    TPACPI_FAN_CMD_ENABLE;
+                        }
+                }
+        }
+
+        vdbg_printk(TPACPI_DBG_INIT, "fan is %s, modes %d, %d\n",
+                str_supported(fan_status_access_mode != TPACPI_FAN_NONE ||
+                  fan_control_access_mode != TPACPI_FAN_WR_NONE),
+                fan_status_access_mode, fan_control_access_mode);
+
+        /* fan control master switch */
+        if (!fan_control_allowed) {
+                fan_control_access_mode = TPACPI_FAN_WR_NONE;
+                fan_control_commands = 0;
+                dbg_printk(TPACPI_DBG_INIT,
+                           "fan control features disabled by parameter\n");
+        }
+
+        /* update fan_control_desired_level */
+        if (fan_status_access_mode != TPACPI_FAN_NONE)
+                fan_get_status_safe(NULL);
+
+        if (fan_status_access_mode != TPACPI_FAN_NONE ||
+            fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+                rc = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+                                         &fan_attr_group);
+                if (!(rc < 0))
+                        rc = driver_create_file(&tpacpi_pdriver.driver,
+                                        &driver_attr_fan_watchdog);
+                if (rc < 0)
+                        return rc;
+                return 0;
+        } else
+                return 1;
+}
+
+/*
+ * Call with fan_mutex held
+ */
+static void fan_update_desired_level(u8 status)
+{
+        if ((status &
+             (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) {
+                if (status > 7)
+                        fan_control_desired_level = 7;
+                else
+                        fan_control_desired_level = status;
+        }
+}
+
+static int fan_get_status(u8 *status)
+{
+        u8 s;
+
+        /* TODO:
+         * Add TPACPI_FAN_RD_ACPI_FANS ? */
+
+        switch (fan_status_access_mode) {
+        case TPACPI_FAN_RD_ACPI_GFAN:
+                /* 570, 600e/x, 770e, 770x */
+
+                if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+                        return -EIO;
+
+                if (likely(status))
+                        *status = s & 0x07;
+
+                break;
+
+        case TPACPI_FAN_RD_TPEC:
+                /* all except 570, 600e/x, 770e, 770x */
+                if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
+                        return -EIO;
+
+                if (likely(status))
+                        *status = s;
+
+                break;
+
+        default:
+                return -ENXIO;
+        }
+
+        return 0;
+}
+
+static int fan_get_status_safe(u8 *status)
+{
+        int rc;
+        u8 s;
+
+        rc = mutex_lock_interruptible(&fan_mutex);
+        if (rc < 0)
+                return rc;
+        rc = fan_get_status(&s);
+        if (!rc)
+                fan_update_desired_level(s);
+        mutex_unlock(&fan_mutex);
+
+        if (status)
+                *status = s;
+
+        return rc;
+}
+
+static void fan_exit(void)
+{
+        vdbg_printk(TPACPI_DBG_EXIT, "cancelling any pending fan watchdog tasks\n");
+
+        /* FIXME: can we really do this unconditionally? */
+        sysfs_remove_group(&tpacpi_pdev->dev.kobj, &fan_attr_group);
+        driver_remove_file(&tpacpi_pdriver.driver, &driver_attr_fan_watchdog);
+
+        cancel_delayed_work(&fan_watchdog_task);
+        flush_scheduled_work();
+}
+
+static int fan_get_speed(unsigned int *speed)
+{
+        u8 hi, lo;
+
+        switch (fan_status_access_mode) {
+        case TPACPI_FAN_RD_TPEC:
+                /* all except 570, 600e/x, 770e, 770x */
+                if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
+                             !acpi_ec_read(fan_rpm_offset + 1, &hi)))
+                        return -EIO;
+
+                if (likely(speed))
+                        *speed = (hi << 8) | lo;
+
+                break;
+
+        default:
+                return -ENXIO;
+        }
+
+        return 0;
+}
+
+static void fan_watchdog_fire(struct work_struct *ignored)
+{
+        int rc;
+
+        printk(IBM_NOTICE "fan watchdog: enabling fan\n");
+        rc = fan_set_enable();
+        if (rc < 0) {
+                printk(IBM_ERR "fan watchdog: error %d while enabling fan, "
+                        "will try again later...\n", -rc);
+                /* reschedule for later */
+                fan_watchdog_reset();
+        }
+}
+
+static void fan_watchdog_reset(void)
+{
+        static int fan_watchdog_active = 0;
+
+        if (fan_control_access_mode == TPACPI_FAN_WR_NONE)
+                return;
+
+        if (fan_watchdog_active)
+                cancel_delayed_work(&fan_watchdog_task);
+
+        if (fan_watchdog_maxinterval > 0) {
+                fan_watchdog_active = 1;
+                if (!schedule_delayed_work(&fan_watchdog_task,
+                                msecs_to_jiffies(fan_watchdog_maxinterval
+                                                 * 1000))) {
+                        printk(IBM_ERR "failed to schedule the fan watchdog, "
+                               "watchdog will not trigger\n");
+                }
+        } else
+                fan_watchdog_active = 0;
+}
+
+static int fan_set_level(int level)
+{
+        if (!fan_control_allowed)
+                return -EPERM;
+
+        switch (fan_control_access_mode) {
+        case TPACPI_FAN_WR_ACPI_SFAN:
+                if (level >= 0 && level <= 7) {
+                        if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
+                                return -EIO;
+                } else
+                        return -EINVAL;
+                break;
+
+        case TPACPI_FAN_WR_ACPI_FANS:
+        case TPACPI_FAN_WR_TPEC:
+                if ((level != TP_EC_FAN_AUTO) &&
+                    (level != TP_EC_FAN_FULLSPEED) &&
+                    ((level < 0) || (level > 7)))
+                        return -EINVAL;
+
+                /* safety net should the EC not support AUTO
+                 * or FULLSPEED mode bits and just ignore them */
+                if (level & TP_EC_FAN_FULLSPEED)
+                        level |= 7;     /* safety min speed 7 */
+                else if (level & TP_EC_FAN_FULLSPEED)
+                        level |= 4;     /* safety min speed 4 */
+
+                if (!acpi_ec_write(fan_status_offset, level))
+                        return -EIO;
+                else
+                        tp_features.fan_ctrl_status_undef = 0;
+                break;
+
+        default:
+                return -ENXIO;
+        }
+        return 0;
+}
+
+static int fan_set_level_safe(int level)
+{
+        int rc;
+
+        if (!fan_control_allowed)
+                return -EPERM;
+
+        rc = mutex_lock_interruptible(&fan_mutex);
+        if (rc < 0)
+                return rc;
+
+        if (level == TPACPI_FAN_LAST_LEVEL)
+                level = fan_control_desired_level;
+
+        rc = fan_set_level(level);
+        if (!rc)
+                fan_update_desired_level(level);
+
+        mutex_unlock(&fan_mutex);
+        return rc;
+}
+
+static int fan_set_enable(void)
+{
+        u8 s;
+        int rc;
+
+        if (!fan_control_allowed)
+                return -EPERM;
+
+        rc = mutex_lock_interruptible(&fan_mutex);
+        if (rc < 0)
+                return rc;
+
+        switch (fan_control_access_mode) {
+        case TPACPI_FAN_WR_ACPI_FANS:
+        case TPACPI_FAN_WR_TPEC:
+                rc = fan_get_status(&s);
+                if (rc < 0)
+                        break;
+
+                /* Don't go out of emergency fan mode */
+                if (s != 7) {
+                        s &= 0x07;
+                        s |= TP_EC_FAN_AUTO | 4; /* min fan speed 4 */
+                }
+
+                if (!acpi_ec_write(fan_status_offset, s))
+                        rc = -EIO;
+                else {
+                        tp_features.fan_ctrl_status_undef = 0;
+                        rc = 0;
+                }
+                break;
+
+        case TPACPI_FAN_WR_ACPI_SFAN:
+                rc = fan_get_status(&s);
+                if (rc < 0)
+                        break;
+
+                s &= 0x07;
+
+                /* Set fan to at least level 4 */
+                s |= 4;
+
+                if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
+                        rc= -EIO;
+                else
+                        rc = 0;
+                break;
+
+        default:
+                rc = -ENXIO;
+        }
+
+        mutex_unlock(&fan_mutex);
+        return rc;
+}
+
+static int fan_set_disable(void)
+{
+        int rc;
+
+        if (!fan_control_allowed)
+                return -EPERM;
+
+        rc = mutex_lock_interruptible(&fan_mutex);
+        if (rc < 0)
+                return rc;
+
+        rc = 0;
+        switch (fan_control_access_mode) {
+        case TPACPI_FAN_WR_ACPI_FANS:
+        case TPACPI_FAN_WR_TPEC:
+                if (!acpi_ec_write(fan_status_offset, 0x00))
+                        rc = -EIO;
+                else {
+                        fan_control_desired_level = 0;
+                        tp_features.fan_ctrl_status_undef = 0;
+                }
+                break;
+
+        case TPACPI_FAN_WR_ACPI_SFAN:
+                if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
+                        rc = -EIO;
+                else
+                        fan_control_desired_level = 0;
+                break;
+
+        default:
+                rc = -ENXIO;
+        }
+
+
+        mutex_unlock(&fan_mutex);
+        return rc;
+}
+
+static int fan_set_speed(int speed)
+{
+        int rc;
+
+        if (!fan_control_allowed)
+                return -EPERM;
+
+        rc = mutex_lock_interruptible(&fan_mutex);
+        if (rc < 0)
+                return rc;
+
+        rc = 0;
+        switch (fan_control_access_mode) {
+        case TPACPI_FAN_WR_ACPI_FANS:
+                if (speed >= 0 && speed <= 65535) {
+                        if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
+                                        speed, speed, speed))
+                                rc = -EIO;
+                } else
+                        rc = -EINVAL;
+                break;
+
+        default:
+                rc = -ENXIO;
+        }
+
+        mutex_unlock(&fan_mutex);
+        return rc;
+}
+
+static int fan_read(char *p)
+{
+        int len = 0;
+        int rc;
+        u8 status;
+        unsigned int speed = 0;
+
+        switch (fan_status_access_mode) {
+        case TPACPI_FAN_RD_ACPI_GFAN:
+                /* 570, 600e/x, 770e, 770x */
+                if ((rc = fan_get_status_safe(&status)) < 0)
+                        return rc;
+
+                len += sprintf(p + len, "status:\t\t%s\n"
+                               "level:\t\t%d\n",
+                               (status != 0) ? "enabled" : "disabled", status);
+                break;
+
+        case TPACPI_FAN_RD_TPEC:
+                /* all except 570, 600e/x, 770e, 770x */
+                if ((rc = fan_get_status_safe(&status)) < 0)
+                        return rc;
+
+                if (unlikely(tp_features.fan_ctrl_status_undef)) {
+                        if (status != fan_control_initial_status)
+                                tp_features.fan_ctrl_status_undef = 0;
+                        else
+                                /* Return most likely status. In fact, it
+                                 * might be the only possible status */
+                                status = TP_EC_FAN_AUTO;
+                }
+
+                len += sprintf(p + len, "status:\t\t%s\n",
+                               (status != 0) ? "enabled" : "disabled");
+
+                if ((rc = fan_get_speed(&speed)) < 0)
+                        return rc;
+
+                len += sprintf(p + len, "speed:\t\t%d\n", speed);
+
+                if (status & TP_EC_FAN_FULLSPEED)
+                        /* Disengaged mode takes precedence */
+                        len += sprintf(p + len, "level:\t\tdisengaged\n");
+                else if (status & TP_EC_FAN_AUTO)
+                        len += sprintf(p + len, "level:\t\tauto\n");
+                else
+                        len += sprintf(p + len, "level:\t\t%d\n", status);
+                break;
+
+        case TPACPI_FAN_NONE:
+        default:
+                len += sprintf(p + len, "status:\t\tnot supported\n");
+        }
+
+        if (fan_control_commands & TPACPI_FAN_CMD_LEVEL) {
+                len += sprintf(p + len, "commands:\tlevel <level>");
+
+                switch (fan_control_access_mode) {
+                case TPACPI_FAN_WR_ACPI_SFAN:
+                        len += sprintf(p + len, " (<level> is 0-7)\n");
+                        break;
+
+                default:
+                        len += sprintf(p + len, " (<level> is 0-7, "
+                                       "auto, disengaged, full-speed)\n");
+                        break;
+                }
+        }
+
+        if (fan_control_commands & TPACPI_FAN_CMD_ENABLE)
+                len += sprintf(p + len, "commands:\tenable, disable\n"
+                               "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
+                               "1-120 (seconds))\n");
+
+        if (fan_control_commands & TPACPI_FAN_CMD_SPEED)
+                len += sprintf(p + len, "commands:\tspeed <speed>"
+                               " (<speed> is 0-65535)\n");
+
+        return len;
+}
+
+static int fan_write_cmd_level(const char *cmd, int *rc)
+{
+        int level;
+
+        if (strlencmp(cmd, "level auto") == 0)
+                level = TP_EC_FAN_AUTO;
+        else if ((strlencmp(cmd, "level disengaged") == 0) |
+                 (strlencmp(cmd, "level full-speed") == 0))
+                level = TP_EC_FAN_FULLSPEED;
+        else if (sscanf(cmd, "level %d", &level) != 1)
+                return 0;
+
+        if ((*rc = fan_set_level_safe(level)) == -ENXIO)
+                printk(IBM_ERR "level command accepted for unsupported "
+                       "access mode %d", fan_control_access_mode);
+
+        return 1;
+}
+
+static int fan_write_cmd_enable(const char *cmd, int *rc)
+{
+        if (strlencmp(cmd, "enable") != 0)
+                return 0;
+
+        if ((*rc = fan_set_enable()) == -ENXIO)
+                printk(IBM_ERR "enable command accepted for unsupported "
+                       "access mode %d", fan_control_access_mode);
+
+        return 1;
+}
+
+static int fan_write_cmd_disable(const char *cmd, int *rc)
+{
+        if (strlencmp(cmd, "disable") != 0)
+                return 0;
+
+        if ((*rc = fan_set_disable()) == -ENXIO)
+                printk(IBM_ERR "disable command accepted for unsupported "
+                       "access mode %d", fan_control_access_mode);
+
+        return 1;
+}
+
+static int fan_write_cmd_speed(const char *cmd, int *rc)
+{
+        int speed;
+
+        /* TODO:
+         * Support speed <low> <medium> <high> ? */
+
+        if (sscanf(cmd, "speed %d", &speed) != 1)
+                return 0;
+
+        if ((*rc = fan_set_speed(speed)) == -ENXIO)
+                printk(IBM_ERR "speed command accepted for unsupported "
+                       "access mode %d", fan_control_access_mode);
+
+        return 1;
+}
+
+static int fan_write_cmd_watchdog(const char *cmd, int *rc)
+{
+        int interval;
+
+        if (sscanf(cmd, "watchdog %d", &interval) != 1)
+                return 0;
+
+        if (interval < 0 || interval > 120)
+                *rc = -EINVAL;
+        else
+                fan_watchdog_maxinterval = interval;
+
+        return 1;
+}
+
+static int fan_write(char *buf)
+{
+        char *cmd;
+        int rc = 0;
+
+        while (!rc && (cmd = next_cmd(&buf))) {
+                if (!((fan_control_commands & TPACPI_FAN_CMD_LEVEL) &&
+                      fan_write_cmd_level(cmd, &rc)) &&
+                    !((fan_control_commands & TPACPI_FAN_CMD_ENABLE) &&
+                      (fan_write_cmd_enable(cmd, &rc) ||
+                       fan_write_cmd_disable(cmd, &rc) ||
+                       fan_write_cmd_watchdog(cmd, &rc))) &&
+                    !((fan_control_commands & TPACPI_FAN_CMD_SPEED) &&
+                      fan_write_cmd_speed(cmd, &rc))
+                    )
+                        rc = -EINVAL;
+                else if (!rc)
+                        fan_watchdog_reset();
+        }
+
+        return rc;
+}
+
+static struct ibm_struct fan_driver_data = {
+        .name = "fan",
+        .read = fan_read,
+        .write = fan_write,
+        .exit = fan_exit,
+};
+
+/****************************************************************************
+ ****************************************************************************
+ *
+ * Infrastructure
+ *
+ ****************************************************************************
+ ****************************************************************************/
+
+/* /proc support */
+static struct proc_dir_entry *proc_dir = NULL;
+
+/* Subdriver registry */
+static LIST_HEAD(tpacpi_all_drivers);
+
+
+/*
+ * Module and infrastructure proble, init and exit handling
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUG
+static const char * __init str_supported(int is_supported)
+{
+        static char text_unsupported[] __initdata = "not supported";
+
+        return (is_supported)? &text_unsupported[4] : &text_unsupported[0];
+}
+#endif /* CONFIG_THINKPAD_ACPI_DEBUG */
+
+static int __init ibm_init(struct ibm_init_struct *iibm)
+{
+        int ret;
+        struct ibm_struct *ibm = iibm->data;
+        struct proc_dir_entry *entry;
+
+        BUG_ON(ibm == NULL);
+
+        INIT_LIST_HEAD(&ibm->all_drivers);
+
+        if (ibm->flags.experimental && !experimental)
+                return 0;
+
+        dbg_printk(TPACPI_DBG_INIT,
+                "probing for %s\n", ibm->name);
+
+        if (iibm->init) {
+                ret = iibm->init(iibm);
+                if (ret > 0)
+                        return 0;       /* probe failed */
+                if (ret)
+                        return ret;
+
+                ibm->flags.init_called = 1;
+        }
+
+        if (ibm->acpi) {
+                if (ibm->acpi->hid) {
+                        ret = register_tpacpi_subdriver(ibm);
+                        if (ret)
+                                goto err_out;
+                }
+
+                if (ibm->acpi->notify) {
+                        ret = setup_acpi_notify(ibm);
+                        if (ret == -ENODEV) {
+                                printk(IBM_NOTICE "disabling subdriver %s\n",
+                                        ibm->name);
+                                ret = 0;
+                                goto err_out;
+                        }
+                        if (ret < 0)
+                                goto err_out;
+                }
+        }
+
+        dbg_printk(TPACPI_DBG_INIT,
+                "%s installed\n", ibm->name);
+
+        if (ibm->read) {
+                entry = create_proc_entry(ibm->name,
+                                          S_IFREG | S_IRUGO | S_IWUSR,
+                                          proc_dir);
+                if (!entry) {
+                        printk(IBM_ERR "unable to create proc entry %s\n",
+                               ibm->name);
+                        ret = -ENODEV;
+                        goto err_out;
+                }
+                entry->owner = THIS_MODULE;
+                entry->data = ibm;
+                entry->read_proc = &dispatch_procfs_read;
+                if (ibm->write)
+                        entry->write_proc = &dispatch_procfs_write;
+                ibm->flags.proc_created = 1;
+        }
+
+        list_add_tail(&ibm->all_drivers, &tpacpi_all_drivers);
+
+        return 0;
+
+err_out:
+        dbg_printk(TPACPI_DBG_INIT,
+                "%s: at error exit path with result %d\n",
+                ibm->name, ret);
+
+        ibm_exit(ibm);
+        return (ret < 0)? ret : 0;
+}
+
+static void ibm_exit(struct ibm_struct *ibm)
+{
+        dbg_printk(TPACPI_DBG_EXIT, "removing %s\n", ibm->name);
+
+        list_del_init(&ibm->all_drivers);
+
+        if (ibm->flags.acpi_notify_installed) {
+                dbg_printk(TPACPI_DBG_EXIT,
+                        "%s: acpi_remove_notify_handler\n", ibm->name);
+                BUG_ON(!ibm->acpi);
+                acpi_remove_notify_handler(*ibm->acpi->handle,
+                                           ibm->acpi->type,
+                                           dispatch_acpi_notify);
+                ibm->flags.acpi_notify_installed = 0;
+                ibm->flags.acpi_notify_installed = 0;
+        }
+
+        if (ibm->flags.proc_created) {
+                dbg_printk(TPACPI_DBG_EXIT,
+                        "%s: remove_proc_entry\n", ibm->name);
+                remove_proc_entry(ibm->name, proc_dir);
+                ibm->flags.proc_created = 0;
+        }
+
+        if (ibm->flags.acpi_driver_registered) {
+                dbg_printk(TPACPI_DBG_EXIT,
+                        "%s: acpi_bus_unregister_driver\n", ibm->name);
+                BUG_ON(!ibm->acpi);
+                acpi_bus_unregister_driver(ibm->acpi->driver);
+                kfree(ibm->acpi->driver);
+                ibm->acpi->driver = NULL;
+                ibm->flags.acpi_driver_registered = 0;
+        }
+
+        if (ibm->flags.init_called && ibm->exit) {
+                ibm->exit();
+                ibm->flags.init_called = 0;
+        }
+
+        dbg_printk(TPACPI_DBG_INIT, "finished removing %s\n", ibm->name);
+}
+
+/* Probing */
+
+static char *ibm_thinkpad_ec_found = NULL;
+
+static char* __init check_dmi_for_ec(void)
+{
+        struct dmi_device *dev = NULL;
+        char ec_fw_string[18];
+
+        /*
+         * ThinkPad T23 or newer, A31 or newer, R50e or newer,
+         * X32 or newer, all Z series;  Some models must have an
+         * up-to-date BIOS or they will not be detected.
+         *
+         * See http://thinkwiki.org/wiki/List_of_DMI_IDs
+         */
+        while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
+                if (sscanf(dev->name,
+                           "IBM ThinkPad Embedded Controller -[%17c",
+                           ec_fw_string) == 1) {
+                        ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
+                        ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
+                        return kstrdup(ec_fw_string, GFP_KERNEL);
+                }
+        }
+        return NULL;
+}
+
+static int __init probe_for_thinkpad(void)
+{
+        int is_thinkpad;
+
+        if (acpi_disabled)
+                return -ENODEV;
+
+        /*
+         * Non-ancient models have better DMI tagging, but very old models
+         * don't.
+         */
+        is_thinkpad = dmi_name_in_vendors("ThinkPad");
+
+        /* ec is required because many other handles are relative to it */
+        IBM_ACPIHANDLE_INIT(ec);
+        if (!ec_handle) {
+                if (is_thinkpad)
+                        printk(IBM_ERR
+                                "Not yet supported ThinkPad detected!\n");
+                return -ENODEV;
+        }
+
+        /*
+         * Risks a regression on very old machines, but reduces potential
+         * false positives a damn great deal
+         */
+        if (!is_thinkpad)
+                is_thinkpad = dmi_name_in_vendors("IBM");
+
+        if (!is_thinkpad && !force_load)
+                return -ENODEV;
+
+        return 0;
+}
+
+
+/* Module init, exit, parameters */
+
+static struct ibm_init_struct ibms_init[] __initdata = {
+        {
+                .init = thinkpad_acpi_driver_init,
+                .data = &thinkpad_acpi_driver_data,
+        },
+        {
+                .init = hotkey_init,
+                .data = &hotkey_driver_data,
+        },
+        {
+                .init = bluetooth_init,
+                .data = &bluetooth_driver_data,
+        },
+        {
+                .init = wan_init,
+                .data = &wan_driver_data,
+        },
+        {
+                .init = video_init,
+                .data = &video_driver_data,
+        },
+        {
+                .init = light_init,
+                .data = &light_driver_data,
+        },
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+        {
+                .init = dock_init,
+                .data = &dock_driver_data[0],
+        },
+        {
+                .init = dock_init2,
+                .data = &dock_driver_data[1],
+        },
+#endif
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+        {
+                .init = bay_init,
+                .data = &bay_driver_data,
+        },
+#endif
+        {
+                .init = cmos_init,
+                .data = &cmos_driver_data,
+        },
+        {
+                .init = led_init,
+                .data = &led_driver_data,
+        },
+        {
+                .init = beep_init,
+                .data = &beep_driver_data,
+        },
+        {
+                .init = thermal_init,
+                .data = &thermal_driver_data,
+        },
+        {
+                .data = &ecdump_driver_data,
+        },
+        {
+                .init = brightness_init,
+                .data = &brightness_driver_data,
+        },
+        {
+                .data = &volume_driver_data,
+        },
+        {
+                .init = fan_init,
+                .data = &fan_driver_data,
+        },
+};
+
+static int __init set_ibm_param(const char *val, struct kernel_param *kp)
+{
+        unsigned int i;
+        struct ibm_struct *ibm;
+
+        for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
+                ibm = ibms_init[i].data;
+                BUG_ON(ibm == NULL);
+
+                if (strcmp(ibm->name, kp->name) == 0 && ibm->write) {
+                        if (strlen(val) > sizeof(ibms_init[i].param) - 2)
+                                return -ENOSPC;
+                        strcpy(ibms_init[i].param, val);
+                        strcat(ibms_init[i].param, ",");
+                        return 0;
+                }
+        }
+
+        return -EINVAL;
+}
+
+static int experimental;
+module_param(experimental, int, 0);
+
+static u32 dbg_level;
+module_param_named(debug, dbg_level, uint, 0);
+
+static int force_load;
+module_param(force_load, int, 0);
+
+static int fan_control_allowed;
+module_param_named(fan_control, fan_control_allowed, int, 0);
+
+#define IBM_PARAM(feature) \
+        module_param_call(feature, set_ibm_param, NULL, NULL, 0)
+
+IBM_PARAM(hotkey);
+IBM_PARAM(bluetooth);
+IBM_PARAM(video);
+IBM_PARAM(light);
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+IBM_PARAM(dock);
+#endif
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+IBM_PARAM(bay);
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+IBM_PARAM(cmos);
+IBM_PARAM(led);
+IBM_PARAM(beep);
+IBM_PARAM(ecdump);
+IBM_PARAM(brightness);
+IBM_PARAM(volume);
+IBM_PARAM(fan);
+
+static int __init thinkpad_acpi_module_init(void)
+{
+        int ret, i;
+
+        /* Driver-level probe */
+        ret = probe_for_thinkpad();
+        if (ret)
+                return ret;
+
+        /* Driver initialization */
+        ibm_thinkpad_ec_found = check_dmi_for_ec();
+        IBM_ACPIHANDLE_INIT(ecrd);
+        IBM_ACPIHANDLE_INIT(ecwr);
+
+        proc_dir = proc_mkdir(IBM_PROC_DIR, acpi_root_dir);
+        if (!proc_dir) {
+                printk(IBM_ERR "unable to create proc dir " IBM_PROC_DIR);
+                thinkpad_acpi_module_exit();
+                return -ENODEV;
+        }
+        proc_dir->owner = THIS_MODULE;
+
+        ret = platform_driver_register(&tpacpi_pdriver);
+        if (ret) {
+                printk(IBM_ERR "unable to register platform driver\n");
+                thinkpad_acpi_module_exit();
+                return ret;
+        }
+        ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver);
+        if (ret) {
+                printk(IBM_ERR "unable to create sysfs driver attributes\n");
+                thinkpad_acpi_module_exit();
+                return ret;
+        }
+
+
+        /* Device initialization */
+        tpacpi_pdev = platform_device_register_simple(IBM_DRVR_NAME, -1,
+                                                        NULL, 0);
+        if (IS_ERR(tpacpi_pdev)) {
+                ret = PTR_ERR(tpacpi_pdev);
+                tpacpi_pdev = NULL;
+                printk(IBM_ERR "unable to register platform device\n");
+                thinkpad_acpi_module_exit();
+                return ret;
+        }
+        tpacpi_hwmon = hwmon_device_register(&tpacpi_pdev->dev);
+        if (IS_ERR(tpacpi_hwmon)) {
+                ret = PTR_ERR(tpacpi_hwmon);
+                tpacpi_hwmon = NULL;
+                printk(IBM_ERR "unable to register hwmon device\n");
+                thinkpad_acpi_module_exit();
+                return ret;
+        }
+        for (i = 0; i < ARRAY_SIZE(ibms_init); i++) {
+                ret = ibm_init(&ibms_init[i]);
+                if (ret >= 0 && *ibms_init[i].param)
+                        ret = ibms_init[i].data->write(ibms_init[i].param);
+                if (ret < 0) {
+                        thinkpad_acpi_module_exit();
+                        return ret;
+                }
+        }
+
+        return 0;
+}
+
+static void thinkpad_acpi_module_exit(void)
+{
+        struct ibm_struct *ibm, *itmp;
+
+        list_for_each_entry_safe_reverse(ibm, itmp,
+                                         &tpacpi_all_drivers,
+                                         all_drivers) {
+                ibm_exit(ibm);
+        }
+
+        dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n");
+
+        if (tpacpi_hwmon)
+                hwmon_device_unregister(tpacpi_hwmon);
+
+        if (tpacpi_pdev)
+                platform_device_unregister(tpacpi_pdev);
+
+        tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver);
+        platform_driver_unregister(&tpacpi_pdriver);
+
+        if (proc_dir)
+                remove_proc_entry(IBM_PROC_DIR, acpi_root_dir);
+
+        kfree(ibm_thinkpad_ec_found);
+}
+
+module_init(thinkpad_acpi_module_init);
+module_exit(thinkpad_acpi_module_exit);
diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h
new file mode 100644
index 000000000000..440145a02617
--- /dev/null
+++ b/drivers/misc/thinkpad_acpi.h
@@ -0,0 +1,572 @@
+/*
+ *  thinkpad_acpi.h - ThinkPad ACPI Extras
+ *
+ *
+ *  Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ *  Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#ifndef __THINKPAD_ACPI_H__
+#define __THINKPAD_ACPI_H__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysfs.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <asm/uaccess.h>
+
+#include <linux/dmi.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+
+#include <acpi/acpi_drivers.h>
+#include <acpi/acnamesp.h>
+
+
+/****************************************************************************
+ * Main driver
+ */
+
+#define IBM_NAME "thinkpad"
+#define IBM_DESC "ThinkPad ACPI Extras"
+#define IBM_FILE "thinkpad_acpi"
+#define IBM_URL "http://ibm-acpi.sf.net/"
+#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net"
+
+#define IBM_PROC_DIR "ibm"
+#define IBM_ACPI_EVENT_PREFIX "ibm"
+#define IBM_DRVR_NAME IBM_FILE
+
+#define IBM_LOG IBM_FILE ": "
+#define IBM_ERR    KERN_ERR    IBM_LOG
+#define IBM_NOTICE KERN_NOTICE IBM_LOG
+#define IBM_INFO   KERN_INFO   IBM_LOG
+#define IBM_DEBUG  KERN_DEBUG  IBM_LOG
+
+#define IBM_MAX_ACPI_ARGS 3
+
+/* ThinkPad CMOS commands */
+#define TP_CMOS_VOLUME_DOWN     0
+#define TP_CMOS_VOLUME_UP       1
+#define TP_CMOS_VOLUME_MUTE     2
+#define TP_CMOS_BRIGHTNESS_UP   4
+#define TP_CMOS_BRIGHTNESS_DOWN 5
+
+#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
+#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
+#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
+
+/* Debugging */
+#define TPACPI_DBG_ALL          0xffff
+#define TPACPI_DBG_ALL          0xffff
+#define TPACPI_DBG_INIT         0x0001
+#define TPACPI_DBG_EXIT         0x0002
+#define dbg_printk(a_dbg_level, format, arg...) \
+        do { if (dbg_level & a_dbg_level) \
+                printk(IBM_DEBUG "%s: " format, __func__ , ## arg); } while (0)
+#ifdef CONFIG_THINKPAD_ACPI_DEBUG
+#define vdbg_printk(a_dbg_level, format, arg...) \
+        dbg_printk(a_dbg_level, format, ## arg)
+static const char *str_supported(int is_supported);
+#else
+#define vdbg_printk(a_dbg_level, format, arg...)
+#endif
+
+/* ACPI HIDs */
+#define IBM_HKEY_HID    "IBM0068"
+#define IBM_PCI_HID     "PNP0A03"
+
+/* ACPI helpers */
+static int __must_check acpi_evalf(acpi_handle handle,
+                      void *res, char *method, char *fmt, ...);
+static int __must_check acpi_ec_read(int i, u8 * p);
+static int __must_check acpi_ec_write(int i, u8 v);
+static int __must_check _sta(acpi_handle handle);
+
+/* ACPI handles */
+static acpi_handle root_handle;                 /* root namespace */
+static acpi_handle ec_handle;                   /* EC */
+static acpi_handle ecrd_handle, ecwr_handle;    /* 570 EC access */
+static acpi_handle cmos_handle, hkey_handle;    /* basic thinkpad handles */
+
+static void drv_acpi_handle_init(char *name,
+                   acpi_handle *handle, acpi_handle parent,
+                   char **paths, int num_paths, char **path);
+#define IBM_ACPIHANDLE_INIT(object)                                             \
+        drv_acpi_handle_init(#object, &object##_handle, *object##_parent,       \
+                object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
+
+/* ThinkPad ACPI helpers */
+static int issue_thinkpad_cmos_command(int cmos_cmd);
+
+/* procfs support */
+static struct proc_dir_entry *proc_dir;
+
+/* procfs helpers */
+static int dispatch_procfs_read(char *page, char **start, off_t off,
+                int count, int *eof, void *data);
+static int dispatch_procfs_write(struct file *file,
+                const char __user * userbuf,
+                unsigned long count, void *data);
+static char *next_cmd(char **cmds);
+
+/* sysfs support */
+struct attribute_set {
+        unsigned int members, max_members;
+        struct attribute_group group;
+};
+
+static struct attribute_set *create_attr_set(unsigned int max_members,
+                                                const char* name);
+#define destroy_attr_set(_set) \
+        kfree(_set);
+static int add_to_attr_set(struct attribute_set* s, struct attribute *attr);
+static int add_many_to_attr_set(struct attribute_set* s,
+                        struct attribute **attr,
+                        unsigned int count);
+#define register_attr_set_with_sysfs(_attr_set, _kobj) \
+        sysfs_create_group(_kobj, &_attr_set->group)
+static void delete_attr_set(struct attribute_set* s, struct kobject *kobj);
+
+static int parse_strtoul(const char *buf, unsigned long max,
+                        unsigned long *value);
+
+/* Device model */
+static struct platform_device *tpacpi_pdev;
+static struct class_device *tpacpi_hwmon;
+static struct platform_driver tpacpi_pdriver;
+static int tpacpi_create_driver_attributes(struct device_driver *drv);
+static void tpacpi_remove_driver_attributes(struct device_driver *drv);
+
+/* Module */
+static int experimental;
+static u32 dbg_level;
+static int force_load;
+static char *ibm_thinkpad_ec_found;
+
+static char* check_dmi_for_ec(void);
+static int thinkpad_acpi_module_init(void);
+static void thinkpad_acpi_module_exit(void);
+
+
+/****************************************************************************
+ * Subdrivers
+ */
+
+struct ibm_struct;
+
+struct tp_acpi_drv_struct {
+        char *hid;
+        struct acpi_driver *driver;
+
+        void (*notify) (struct ibm_struct *, u32);
+        acpi_handle *handle;
+        u32 type;
+        struct acpi_device *device;
+};
+
+struct ibm_struct {
+        char *name;
+
+        int (*read) (char *);
+        int (*write) (char *);
+        void (*exit) (void);
+
+        struct list_head all_drivers;
+
+        struct tp_acpi_drv_struct *acpi;
+
+        struct {
+                u8 acpi_driver_registered:1;
+                u8 acpi_notify_installed:1;
+                u8 proc_created:1;
+                u8 init_called:1;
+                u8 experimental:1;
+        } flags;
+};
+
+struct ibm_init_struct {
+        char param[32];
+
+        int (*init) (struct ibm_init_struct *);
+        struct ibm_struct *data;
+};
+
+static struct {
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+        u16 bay_status:1;
+        u16 bay_eject:1;
+        u16 bay_status2:1;
+        u16 bay_eject2:1;
+#endif
+        u16 bluetooth:1;
+        u16 hotkey:1;
+        u16 hotkey_mask:1;
+        u16 light:1;
+        u16 light_status:1;
+        u16 wan:1;
+        u16 fan_ctrl_status_undef:1;
+} tp_features;
+
+static struct list_head tpacpi_all_drivers;
+
+static struct ibm_init_struct ibms_init[];
+static int set_ibm_param(const char *val, struct kernel_param *kp);
+static int ibm_init(struct ibm_init_struct *iibm);
+static void ibm_exit(struct ibm_struct *ibm);
+
+
+/*
+ * procfs master subdriver
+ */
+static int thinkpad_acpi_driver_init(struct ibm_init_struct *iibm);
+static int thinkpad_acpi_driver_read(char *p);
+
+
+/*
+ * Bay subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_BAY
+static acpi_handle bay_handle, bay_ej_handle;
+static acpi_handle bay2_handle, bay2_ej_handle;
+
+static int bay_init(struct ibm_init_struct *iibm);
+static void bay_notify(struct ibm_struct *ibm, u32 event);
+static int bay_read(char *p);
+static int bay_write(char *buf);
+#endif /* CONFIG_THINKPAD_ACPI_BAY */
+
+
+/*
+ * Beep subdriver
+ */
+
+static acpi_handle beep_handle;
+
+static int beep_read(char *p);
+static int beep_write(char *buf);
+
+
+/*
+ * Bluetooth subdriver
+ */
+
+#define TPACPI_BLUETH_SYSFS_GROUP "bluetooth"
+
+enum {
+        /* ACPI GBDC/SBDC bits */
+        TP_ACPI_BLUETOOTH_HWPRESENT     = 0x01, /* Bluetooth hw available */
+        TP_ACPI_BLUETOOTH_RADIOSSW      = 0x02, /* Bluetooth radio enabled */
+        TP_ACPI_BLUETOOTH_UNK           = 0x04, /* unknown function */
+};
+
+static int bluetooth_init(struct ibm_init_struct *iibm);
+static int bluetooth_get_radiosw(void);
+static int bluetooth_set_radiosw(int radio_on);
+static int bluetooth_read(char *p);
+static int bluetooth_write(char *buf);
+
+
+/*
+ * Brightness (backlight) subdriver
+ */
+
+#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen"
+
+static struct backlight_device *ibm_backlight_device;
+static int brightness_offset = 0x31;
+
+static int brightness_init(struct ibm_init_struct *iibm);
+static void brightness_exit(void);
+static int brightness_get(struct backlight_device *bd);
+static int brightness_set(int value);
+static int brightness_update_status(struct backlight_device *bd);
+static int brightness_read(char *p);
+static int brightness_write(char *buf);
+
+
+/*
+ * CMOS subdriver
+ */
+
+static int cmos_read(char *p);
+static int cmos_write(char *buf);
+
+
+/*
+ * Dock subdriver
+ */
+
+#ifdef CONFIG_THINKPAD_ACPI_DOCK
+static acpi_handle pci_handle;
+static acpi_handle dock_handle;
+
+static void dock_notify(struct ibm_struct *ibm, u32 event);
+static int dock_read(char *p);
+static int dock_write(char *buf);
+#endif /* CONFIG_THINKPAD_ACPI_DOCK */
+
+
+/*
+ * EC dump subdriver
+ */
+
+static int ecdump_read(char *p) ;
+static int ecdump_write(char *buf);
+
+
+/*
+ * Fan subdriver
+ */
+
+enum {                                  /* Fan control constants */
+        fan_status_offset = 0x2f,       /* EC register 0x2f */
+        fan_rpm_offset = 0x84,          /* EC register 0x84: LSB, 0x85 MSB (RPM)
+                                         * 0x84 must be read before 0x85 */
+
+        TP_EC_FAN_FULLSPEED = 0x40,     /* EC fan mode: full speed */
+        TP_EC_FAN_AUTO      = 0x80,     /* EC fan mode: auto fan control */
+
+        TPACPI_FAN_LAST_LEVEL = 0x100,  /* Use cached last-seen fan level */
+};
+
+enum fan_status_access_mode {
+        TPACPI_FAN_NONE = 0,            /* No fan status or control */
+        TPACPI_FAN_RD_ACPI_GFAN,        /* Use ACPI GFAN */
+        TPACPI_FAN_RD_TPEC,             /* Use ACPI EC regs 0x2f, 0x84-0x85 */
+};
+
+enum fan_control_access_mode {
+        TPACPI_FAN_WR_NONE = 0,         /* No fan control */
+        TPACPI_FAN_WR_ACPI_SFAN,        /* Use ACPI SFAN */
+        TPACPI_FAN_WR_TPEC,             /* Use ACPI EC reg 0x2f */
+        TPACPI_FAN_WR_ACPI_FANS,        /* Use ACPI FANS and EC reg 0x2f */
+};
+
+enum fan_control_commands {
+        TPACPI_FAN_CMD_SPEED    = 0x0001,       /* speed command */
+        TPACPI_FAN_CMD_LEVEL    = 0x0002,       /* level command  */
+        TPACPI_FAN_CMD_ENABLE   = 0x0004,       /* enable/disable cmd,
+                                                 * and also watchdog cmd */
+};
+
+static int fan_control_allowed;
+
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
+static u8 fan_control_initial_status;
+static u8 fan_control_desired_level;
+static int fan_watchdog_maxinterval;
+
+static struct mutex fan_mutex;
+
+static acpi_handle fans_handle, gfan_handle, sfan_handle;
+
+static int fan_init(struct ibm_init_struct *iibm);
+static void fan_exit(void);
+static int fan_get_status(u8 *status);
+static int fan_get_status_safe(u8 *status);
+static int fan_get_speed(unsigned int *speed);
+static void fan_update_desired_level(u8 status);
+static void fan_watchdog_fire(struct work_struct *ignored);
+static void fan_watchdog_reset(void);
+static int fan_set_level(int level);
+static int fan_set_level_safe(int level);
+static int fan_set_enable(void);
+static int fan_set_disable(void);
+static int fan_set_speed(int speed);
+static int fan_read(char *p);
+static int fan_write(char *buf);
+static int fan_write_cmd_level(const char *cmd, int *rc);
+static int fan_write_cmd_enable(const char *cmd, int *rc);
+static int fan_write_cmd_disable(const char *cmd, int *rc);
+static int fan_write_cmd_speed(const char *cmd, int *rc);
+static int fan_write_cmd_watchdog(const char *cmd, int *rc);
+
+
+/*
+ * Hotkey subdriver
+ */
+
+#define TPACPI_HOTKEY_SYSFS_GROUP "hotkey"
+
+static int hotkey_orig_status;
+static int hotkey_orig_mask;
+
+static struct mutex hotkey_mutex;
+
+static int hotkey_init(struct ibm_init_struct *iibm);
+static void hotkey_exit(void);
+static int hotkey_get(int *status, int *mask);
+static int hotkey_set(int status, int mask);
+static void hotkey_notify(struct ibm_struct *ibm, u32 event);
+static int hotkey_read(char *p);
+static int hotkey_write(char *buf);
+
+
+/*
+ * LED subdriver
+ */
+
+enum led_access_mode {
+        TPACPI_LED_NONE = 0,
+        TPACPI_LED_570, /* 570 */
+        TPACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+        TPACPI_LED_NEW, /* all others */
+};
+
+enum {  /* For TPACPI_LED_OLD */
+        TPACPI_LED_EC_HLCL = 0x0c,      /* EC reg to get led to power on */
+        TPACPI_LED_EC_HLBL = 0x0d,      /* EC reg to blink a lit led */
+        TPACPI_LED_EC_HLMS = 0x0e,      /* EC reg to select led to command */
+};
+
+static enum led_access_mode led_supported;
+static acpi_handle led_handle;
+
+static int led_init(struct ibm_init_struct *iibm);
+static int led_read(char *p);
+static int led_write(char *buf);
+
+/*
+ * Light (thinklight) subdriver
+ */
+
+static acpi_handle lght_handle, ledb_handle;
+
+static int light_init(struct ibm_init_struct *iibm);
+static int light_read(char *p);
+static int light_write(char *buf);
+
+
+/*
+ * Thermal subdriver
+ */
+
+enum thermal_access_mode {
+        TPACPI_THERMAL_NONE = 0,        /* No thermal support */
+        TPACPI_THERMAL_ACPI_TMP07,      /* Use ACPI TMP0-7 */
+        TPACPI_THERMAL_ACPI_UPDT,       /* Use ACPI TMP0-7 with UPDT */
+        TPACPI_THERMAL_TPEC_8,          /* Use ACPI EC regs, 8 sensors */
+        TPACPI_THERMAL_TPEC_16,         /* Use ACPI EC regs, 16 sensors */
+};
+
+enum { /* TPACPI_THERMAL_TPEC_* */
+        TP_EC_THERMAL_TMP0 = 0x78,      /* ACPI EC regs TMP 0..7 */
+        TP_EC_THERMAL_TMP8 = 0xC0,      /* ACPI EC regs TMP 8..15 */
+        TP_EC_THERMAL_TMP_NA = -128,    /* ACPI EC sensor not available */
+};
+
+#define TPACPI_MAX_THERMAL_SENSORS 16   /* Max thermal sensors supported */
+struct ibm_thermal_sensors_struct {
+        s32 temp[TPACPI_MAX_THERMAL_SENSORS];
+};
+
+static enum thermal_access_mode thermal_read_mode;
+
+static int thermal_init(struct ibm_init_struct *iibm);
+static int thermal_get_sensor(int idx, s32 *value);
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s);
+static int thermal_read(char *p);
+
+
+/*
+ * Video subdriver
+ */
+
+enum video_access_mode {
+        TPACPI_VIDEO_NONE = 0,
+        TPACPI_VIDEO_570,       /* 570 */
+        TPACPI_VIDEO_770,       /* 600e/x, 770e, 770x */
+        TPACPI_VIDEO_NEW,       /* all others */
+};
+
+enum {  /* video status flags, based on VIDEO_570 */
+        TP_ACPI_VIDEO_S_LCD = 0x01,     /* LCD output enabled */
+        TP_ACPI_VIDEO_S_CRT = 0x02,     /* CRT output enabled */
+        TP_ACPI_VIDEO_S_DVI = 0x08,     /* DVI output enabled */
+};
+
+enum {  /* TPACPI_VIDEO_570 constants */
+        TP_ACPI_VIDEO_570_PHSCMD = 0x87,        /* unknown magic constant :( */
+        TP_ACPI_VIDEO_570_PHSMASK = 0x03,       /* PHS bits that map to
+                                                 * video_status_flags */
+        TP_ACPI_VIDEO_570_PHS2CMD = 0x8b,       /* unknown magic constant :( */
+        TP_ACPI_VIDEO_570_PHS2SET = 0x80,       /* unknown magic constant :( */
+};
+
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
+static acpi_handle vid_handle, vid2_handle;
+
+static int video_init(struct ibm_init_struct *iibm);
+static void video_exit(void);
+static int video_outputsw_get(void);
+static int video_outputsw_set(int status);
+static int video_autosw_get(void);
+static int video_autosw_set(int enable);
+static int video_outputsw_cycle(void);
+static int video_expand_toggle(void);
+static int video_read(char *p);
+static int video_write(char *buf);
+
+
+/*
+ * Volume subdriver
+ */
+
+static int volume_offset = 0x30;
+
+static int volume_read(char *p);
+static int volume_write(char *buf);
+
+
+/*
+ * Wan subdriver
+ */
+
+#define TPACPI_WAN_SYSFS_GROUP "wwan"
+
+enum {
+        /* ACPI GWAN/SWAN bits */
+        TP_ACPI_WANCARD_HWPRESENT       = 0x01, /* Wan hw available */
+        TP_ACPI_WANCARD_RADIOSSW        = 0x02, /* Wan radio enabled */
+        TP_ACPI_WANCARD_UNK             = 0x04, /* unknown function */
+};
+
+static int wan_init(struct ibm_init_struct *iibm);
+static int wan_get_radiosw(void);
+static int wan_set_radiosw(int radio_on);
+static int wan_read(char *p);
+static int wan_write(char *buf);
+
+
+#endif /* __THINKPAD_ACPI_H */
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index a064f36a0805..b5ac810404c0 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -317,6 +317,10 @@ static int __init acpi_pci_init(void)
 {
         int ret;
 
+        if (acpi_gbl_FADT.boot_flags & BAF_MSI_NOT_SUPPORTED) {
+                printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
+                pci_no_msi();
+        }
         ret = register_acpi_bus_type(&acpi_pci_bus);
         if (ret)
                 return 0;
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 09469e7db6a5..955adfb8d64c 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -276,6 +276,7 @@ enum acpi_prefered_pm_profiles {
 
 #define BAF_LEGACY_DEVICES              0x0001
 #define BAF_8042_KEYBOARD_CONTROLLER    0x0002
+#define BAF_MSI_NOT_SUPPORTED           0x0008
 
 #define FADT2_REVISION_ID               3
 #define FADT2_MINUS_REVISION_ID         2
diff --git a/include/linux/sony-laptop.h b/include/linux/sony-laptop.h
new file mode 100644
index 000000000000..e2e036d94e4a
--- /dev/null
+++ b/include/linux/sony-laptop.h
@@ -0,0 +1,34 @@
+#ifndef _SONYLAPTOP_H_
+#define _SONYLAPTOP_H_
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+
+/* used only for communication between v4l and sony-laptop */
+
+#define SONY_PIC_COMMAND_GETCAMERA               1      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERA               2
+#define SONY_PIC_COMMAND_GETCAMERABRIGHTNESS     3      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERABRIGHTNESS     4
+#define SONY_PIC_COMMAND_GETCAMERACONTRAST       5      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERACONTRAST       6
+#define SONY_PIC_COMMAND_GETCAMERAHUE            7      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAHUE            8
+#define SONY_PIC_COMMAND_GETCAMERACOLOR          9      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERACOLOR         10
+#define SONY_PIC_COMMAND_GETCAMERASHARPNESS     11      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERASHARPNESS     12
+#define SONY_PIC_COMMAND_GETCAMERAPICTURE       13      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAPICTURE       14
+#define SONY_PIC_COMMAND_GETCAMERAAGC           15      /* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAAGC           16
+#define SONY_PIC_COMMAND_GETCAMERADIRECTION     17      /* obsolete */
+#define SONY_PIC_COMMAND_GETCAMERAROMVERSION    18      /* obsolete */
+#define SONY_PIC_COMMAND_GETCAMERAREVISION      19      /* obsolete */
+
+int sony_pic_camera_command(int command, u8 value);
+
+#endif  /* __KERNEL__ */
+
+#endif /* _SONYLAPTOP_H_ */