237 files changed, 10923 insertions, 10469 deletions
diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
new file mode 100644
index 000000000000..31af1cbb60bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
@@ -0,0 +1,17 @@
+* Marvell Tauros2 Cache
+Required properties:
+- compatible : Should be "marvell,tauros2-cache".
+- marvell,tauros2-cache-features : Specify the features supported for the
+  tauros2 cache.
+  The features including
+    CACHE_TAUROS2_PREFETCH_ON       (1 << 0)
+    CACHE_TAUROS2_LINEFILL_BURST8   (1 << 1)
+  The definition can be found at
+  arch/arm/include/asm/hardware/cache-tauros2.h
+Example:
+        L2: l2-cache {
+                compatible = "marvell,tauros2-cache";
+                marvell,tauros2-cache-features = <0x3>;
+        };
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
new file mode 100644
index 000000000000..8c5907b9cae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -0,0 +1,38 @@
+* MSM Timer
+Properties:
+- compatible : Should at least contain "qcom,msm-timer". More specific
+  properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
+  purpose timer and a debug timer respectively.
+- interrupts : Interrupt indicating a match event.
+- reg : Specifies the base address of the timer registers. The second region
+  specifies an optional register used to configure the clock divider.
+- clock-frequency : The frequency of the timer in Hz.
+Optional:
+- cpu-offset : per-cpu offset used when the timer is accessed without the
+  CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+Example:
+       timer@200a004 {
+               compatible = "qcom,msm-gpt", "qcom,msm-timer";
+               interrupts = <1 2 0x301>;
+               reg = <0x0200a004 0x10>;
+               clock-frequency = <32768>;
+               cpu-offset = <0x40000>;
+       };
+       timer@200a024 {
+               compatible = "qcom,msm-dgt", "qcom,msm-timer";
+               interrupts = <1 3 0x301>;
+               reg = <0x0200a024 0x10>,
+                     <0x0200a034 0x4>;
+               clock-frequency = <6750000>;
+               cpu-offset = <0x40000>;
+       };
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index ccdd0e53451f..d0051a750587 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -36,6 +36,9 @@ Boards:
 - OMAP3 BeagleBoard : Low cost community board
  compatible = "ti,omap3-beagle", "ti,omap3"
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
 - OMAP4 SDP : Software Developement Board
  compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
new file mode 100644
index 000000000000..a0b867ef8d96
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -0,0 +1,76 @@
+* Clock bindings for Freescale i.MX23
+Required properties:
+- compatible: Should be "fsl,imx23-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX23
+clocks and IDs.
+        Clock           ID
+        ------------------
+        ref_xtal        0
+        pll             1
+        ref_cpu         2
+        ref_emi         3
+        ref_pix         4
+        ref_io          5
+        saif_sel        6
+        lcdif_sel       7
+        gpmi_sel        8
+        ssp_sel         9
+        emi_sel         10
+        cpu             11
+        etm_sel         12
+        cpu_pll         13
+        cpu_xtal        14
+        hbus            15
+        xbus            16
+        lcdif_div       17
+        ssp_div         18
+        gpmi_div        19
+        emi_pll         20
+        emi_xtal        21
+        etm_div         22
+        saif_div        23
+        clk32k_div      24
+        rtc             25
+        adc             26
+        spdif_div       27
+        clk32k          28
+        dri             29
+        pwm             30
+        filt            31
+        uart            32
+        ssp             33
+        gpmi            34
+        spdif           35
+        emi             36
+        saif            37
+        lcdif           38
+        etm             39
+        usb             40
+        usb_pwr         41
+Examples:
+clks: clkctrl@80040000 {
+        compatible = "fsl,imx23-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+        clock-output-names =
+                ...
+                "uart",         /* 32 */
+                ...
+                "end_of_list";
+};
+auart0: serial@8006c000 {
+        compatible = "fsl,imx23-auart";
+        reg = <0x8006c000 0x2000>;
+        interrupts = <24 25 23>;
+        clocks = <&clks 32>;
+        status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
new file mode 100644
index 000000000000..aa2af2866fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -0,0 +1,99 @@
+* Clock bindings for Freescale i.MX28
+Required properties:
+- compatible: Should be "fsl,imx28-clkctrl"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX28
+clocks and IDs.
+        Clock           ID
+        ------------------
+        ref_xtal        0
+        pll0            1
+        pll1            2
+        pll2            3
+        ref_cpu         4
+        ref_emi         5
+        ref_io0         6
+        ref_io1         7
+        ref_pix         8
+        ref_hsadc       9
+        ref_gpmi        10
+        saif0_sel       11
+        saif1_sel       12
+        gpmi_sel        13
+        ssp0_sel        14
+        ssp1_sel        15
+        ssp2_sel        16
+        ssp3_sel        17
+        emi_sel         18
+        etm_sel         19
+        lcdif_sel       20
+        cpu             21
+        ptp_sel         22
+        cpu_pll         23
+        cpu_xtal        24
+        hbus            25
+        xbus            26
+        ssp0_div        27
+        ssp1_div        28
+        ssp2_div        29
+        ssp3_div        30
+        gpmi_div        31
+        emi_pll         32
+        emi_xtal        33
+        lcdif_div       34
+        etm_div         35
+        ptp             36
+        saif0_div       37
+        saif1_div       38
+        clk32k_div      39
+        rtc             40
+        lradc           41
+        spdif_div       42
+        clk32k          43
+        pwm             44
+        uart            45
+        ssp0            46
+        ssp1            47
+        ssp2            48
+        ssp3            49
+        gpmi            50
+        spdif           51
+        emi             52
+        saif0           53
+        saif1           54
+        lcdif           55
+        etm             56
+        fec             57
+        can0            58
+        can1            59
+        usb0            60
+        usb1            61
+        usb0_pwr        62
+        usb1_pwr        63
+        enet_out        64
+Examples:
+clks: clkctrl@80040000 {
+        compatible = "fsl,imx28-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+        clock-output-names =
+                ...
+                "uart",         /* 45 */
+                ...
+                "end_of_list";
+};
+auart0: serial@8006a000 {
+        compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+        reg = <0x8006a000 0x2000>;
+        interrupts = <112 70 71>;
+        clocks = <&clks 45>;
+        status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
new file mode 100644
index 000000000000..492bd991d52a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -0,0 +1,222 @@
+* Clock bindings for Freescale i.MX6 Quad
+Required properties:
+- compatible: Should be "fsl,imx6q-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX6Q
+clocks and IDs.
+        Clock                   ID
+        ---------------------------
+        dummy                   0
+        ckil                    1
+        ckih                    2
+        osc                     3
+        pll2_pfd0_352m          4
+        pll2_pfd1_594m          5
+        pll2_pfd2_396m          6
+        pll3_pfd0_720m          7
+        pll3_pfd1_540m          8
+        pll3_pfd2_508m          9
+        pll3_pfd3_454m          10
+        pll2_198m               11
+        pll3_120m               12
+        pll3_80m                13
+        pll3_60m                14
+        twd                     15
+        step                    16
+        pll1_sw                 17
+        periph_pre              18
+        periph2_pre             19
+        periph_clk2_sel         20
+        periph2_clk2_sel        21
+        axi_sel                 22
+        esai_sel                23
+        asrc_sel                24
+        spdif_sel               25
+        gpu2d_axi               26
+        gpu3d_axi               27
+        gpu2d_core_sel          28
+        gpu3d_core_sel          29
+        gpu3d_shader_sel        30
+        ipu1_sel                31
+        ipu2_sel                32
+        ldb_di0_sel             33
+        ldb_di1_sel             34
+        ipu1_di0_pre_sel        35
+        ipu1_di1_pre_sel        36
+        ipu2_di0_pre_sel        37
+        ipu2_di1_pre_sel        38
+        ipu1_di0_sel            39
+        ipu1_di1_sel            40
+        ipu2_di0_sel            41
+        ipu2_di1_sel            42
+        hsi_tx_sel              43
+        pcie_axi_sel            44
+        ssi1_sel                45
+        ssi2_sel                46
+        ssi3_sel                47
+        usdhc1_sel              48
+        usdhc2_sel              49
+        usdhc3_sel              50
+        usdhc4_sel              51
+        enfc_sel                52
+        emi_sel                 53
+        emi_slow_sel            54
+        vdo_axi_sel             55
+        vpu_axi_sel             56
+        cko1_sel                57
+        periph                  58
+        periph2                 59
+        periph_clk2             60
+        periph2_clk2            61
+        ipg                     62
+        ipg_per                 63
+        esai_pred               64
+        esai_podf               65
+        asrc_pred               66
+        asrc_podf               67
+        spdif_pred              68
+        spdif_podf              69
+        can_root                70
+        ecspi_root              71
+        gpu2d_core_podf         72
+        gpu3d_core_podf         73
+        gpu3d_shader            74
+        ipu1_podf               75
+        ipu2_podf               76
+        ldb_di0_podf            77
+        ldb_di1_podf            78
+        ipu1_di0_pre            79
+        ipu1_di1_pre            80
+        ipu2_di0_pre            81
+        ipu2_di1_pre            82
+        hsi_tx_podf             83
+        ssi1_pred               84
+        ssi1_podf               85
+        ssi2_pred               86
+        ssi2_podf               87
+        ssi3_pred               88
+        ssi3_podf               89
+        uart_serial_podf        90
+        usdhc1_podf             91
+        usdhc2_podf             92
+        usdhc3_podf             93
+        usdhc4_podf             94
+        enfc_pred               95
+        enfc_podf               96
+        emi_podf                97
+        emi_slow_podf           98
+        vpu_axi_podf            99
+        cko1_podf               100
+        axi                     101
+        mmdc_ch0_axi_podf       102
+        mmdc_ch1_axi_podf       103
+        arm                     104
+        ahb                     105
+        apbh_dma                106
+        asrc                    107
+        can1_ipg                108
+        can1_serial             109
+        can2_ipg                110
+        can2_serial             111
+        ecspi1                  112
+        ecspi2                  113
+        ecspi3                  114
+        ecspi4                  115
+        ecspi5                  116
+        enet                    117
+        esai                    118
+        gpt_ipg                 119
+        gpt_ipg_per             120
+        gpu2d_core              121
+        gpu3d_core              122
+        hdmi_iahb               123
+        hdmi_isfr               124
+        i2c1                    125
+        i2c2                    126
+        i2c3                    127
+        iim                     128
+        enfc                    129
+        ipu1                    130
+        ipu1_di0                131
+        ipu1_di1                132
+        ipu2                    133
+        ipu2_di0                134
+        ldb_di0                 135
+        ldb_di1                 136
+        ipu2_di1                137
+        hsi_tx                  138
+        mlb                     139
+        mmdc_ch0_axi            140
+        mmdc_ch1_axi            141
+        ocram                   142
+        openvg_axi              143
+        pcie_axi                144
+        pwm1                    145
+        pwm2                    146
+        pwm3                    147
+        pwm4                    148
+        per1_bch                149
+        gpmi_bch_apb            150
+        gpmi_bch                151
+        gpmi_io                 152
+        gpmi_apb                153
+        sata                    154
+        sdma                    155
+        spba                    156
+        ssi1                    157
+        ssi2                    158
+        ssi3                    159
+        uart_ipg                160
+        uart_serial             161
+        usboh3                  162
+        usdhc1                  163
+        usdhc2                  164
+        usdhc3                  165
+        usdhc4                  166
+        vdo_axi                 167
+        vpu_axi                 168
+        cko1                    169
+        pll1_sys                170
+        pll2_bus                171
+        pll3_usb_otg            172
+        pll4_audio              173
+        pll5_video              174
+        pll6_mlb                175
+        pll7_usb_host           176
+        pll8_enet               177
+        ssi1_ipg                178
+        ssi2_ipg                179
+        ssi3_ipg                180
+        rom                     181
+        usbphy1                 182
+        usbphy2                 183
+        ldb_di0_div_3_5         184
+        ldb_di1_div_3_5         185
+Examples:
+clks: ccm@020c4000 {
+        compatible = "fsl,imx6q-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 0x04 0 88 0x04>;
+        #clock-cells = <1>;
+        clock-output-names = ...
+                             "uart_ipg",
+                             "uart_serial",
+                             ...;
+};
+uart1: serial@02020000 {
+        compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+        reg = <0x02020000 0x4000>;
+        interrupts = <0 26 0x04>;
+        clocks = <&clks 160>, <&clks 161>;
+        clock-names = "ipg", "per";
+        status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
index 5375625e8cd2..f1e5dfecf55d 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -39,3 +39,46 @@ Example:
                #gpio-cells = <4>;
                gpio-controller;
        };
+Samsung S3C24XX GPIO Controller
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
+  should be the following with values derived from the SoC user manual.
+     <[phandle of the gpio controller node]
+      [pin number within the gpio controller]
+      [mux function]
+      [flags and pull up/down]
+  Values for gpio specifier:
+  - Pin number: depending on the controller a number from 0 up to 15.
+  - Mux function: Depending on the SoC and the gpio bank the gpio can be set
+                  as input, output or a special function
+  - Flags and Pull Up/Down: the values to use differ for the individual SoCs
+                    example S3C2416/S3C2450:
+                            0 - Pull Up/Down Disabled.
+                            1 - Pull Down Enabled.
+                            2 - Pull Up Enabled.
+          Bit 16 (0x00010000) - Input is active low.
+  Consult the user manual for the correct values of Mux and Pull Up/Down.
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+Example:
+        gpa: gpio-controller@56000000 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "samsung,s3c24xx-gpio";
+                reg = <0x56000000 0x10>;
+                #gpio-cells = <3>;
+                gpio-controller;
+        };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
index 16695d9cf1e8..66788fda1db3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -11,6 +11,11 @@ Required properties:
 - interrupt-controller: Mark the device node as an interrupt controller
  The first cell is the GPIO number.
  The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
 Example:
@@ -20,4 +25,5 @@ twl_gpio: gpio {
    gpio-controller;
    #interrupt-cells = <2>;
    interrupt-controller;
+    ti,use-leds;
 };
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a85f986961b..2f5322b119eb 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,3 +56,4 @@ stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62              Serial real-time clock (RTC) with alarm
 stm,m41t80              M41T80 - SERIAL ACCESS RTC WITH ALARMS
 ti,tsc2003              I2C Touch-Screen Controller
+ti,tmp102               Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
new file mode 100644
index 000000000000..9ceb19e0c7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
@@ -0,0 +1,52 @@
+* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
+Required properties:
+- compatible : Should be "jedec,lpddr2-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
+Optional properties:
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds). Parameters with
+a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
+- tRCD
+- tWR
+- tRAS-min
+- tRRD
+- tWTR
+- tXP
+- tRTP
+- tDQSCK-max
+- tFAW
+- tZQCS
+- tZQinit
+- tRPab
+- tZQCL
+- tCKESR
+- tRAS-max-ns
+- tDQSCK-max-derated
+Example:
+timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+        compatible      = "jedec,lpddr2-timings";
+        min-freq        = <10000000>;
+        max-freq        = <400000000>;
+        tRPab           = <21000>;
+        tRCD            = <18000>;
+        tWR             = <15000>;
+        tRAS-min        = <42000>;
+        tRRD            = <10000>;
+        tWTR            = <7500>;
+        tXP             = <7500>;
+        tRTP            = <7500>;
+        tCKESR          = <15000>;
+        tDQSCK-max      = <5500>;
+        tFAW            = <50000>;
+        tZQCS           = <90000>;
+        tZQCL           = <360000>;
+        tZQinit         = <1000000>;
+        tRAS-max-ns     = <70000>;
+};
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
new file mode 100644
index 000000000000..58354a075e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
@@ -0,0 +1,102 @@
+* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
+Required properties:
+- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
+  "jedec,lpddr2-s4"
+  "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
+  "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
+  "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
+- density  : <u32> representing density in Mb (Mega bits)
+- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
+Optional properties:
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRRD-min-tck
+- tWTR-min-tck
+- tXP-min-tck
+- tRTP-min-tck
+- tCKE-min-tck
+- tRPab-min-tck
+- tRCD-min-tck
+- tWR-min-tck
+- tRASmin-min-tck
+- tCKESR-min-tck
+- tFAW-min-tck
+Child nodes:
+- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+  "lpddr2-timings" provides AC timing parameters of the device for
+  a given speed-bin. The user may provide the timings for as many
+  speed-bins as is required. Please see Documentation/devicetree/
+  bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
+Example:
+elpida_ECB240ABACN : lpddr2 {
+        compatible      = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+        density         = <2048>;
+        io-width        = <32>;
+        tRPab-min-tck   = <3>;
+        tRCD-min-tck    = <3>;
+        tWR-min-tck     = <3>;
+        tRASmin-min-tck = <3>;
+        tRRD-min-tck    = <2>;
+        tWTR-min-tck    = <2>;
+        tXP-min-tck     = <2>;
+        tRTP-min-tck    = <2>;
+        tCKE-min-tck    = <3>;
+        tCKESR-min-tck  = <3>;
+        tFAW-min-tck    = <8>;
+        timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+                compatible      = "jedec,lpddr2-timings";
+                min-freq        = <10000000>;
+                max-freq        = <400000000>;
+                tRPab           = <21000>;
+                tRCD            = <18000>;
+                tWR             = <15000>;
+                tRAS-min        = <42000>;
+                tRRD            = <10000>;
+                tWTR            = <7500>;
+                tXP             = <7500>;
+                tRTP            = <7500>;
+                tCKESR          = <15000>;
+                tDQSCK-max      = <5500>;
+                tFAW            = <50000>;
+                tZQCS           = <90000>;
+                tZQCL           = <360000>;
+                tZQinit         = <1000000>;
+                tRAS-max-ns     = <70000>;
+        };
+        timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+                compatible      = "jedec,lpddr2-timings";
+                min-freq        = <10000000>;
+                max-freq        = <200000000>;
+                tRPab           = <21000>;
+                tRCD            = <18000>;
+                tWR             = <15000>;
+                tRAS-min        = <42000>;
+                tRRD            = <10000>;
+                tWTR            = <10000>;
+                tXP             = <7500>;
+                tRTP            = <7500>;
+                tCKESR          = <15000>;
+                tDQSCK-max      = <5500>;
+                tFAW            = <50000>;
+                tZQCS           = <90000>;
+                tZQCL           = <360000>;
+                tZQinit         = <1000000>;
+                tRAS-max-ns     = <70000>;
+        };
+}
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
new file mode 100644
index 000000000000..938f8e1ba205
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -0,0 +1,55 @@
+* EMIF family of TI SDRAM controllers
+EMIF - External Memory Interface - is an SDRAM controller used in
+TI SoCs. EMIF supports, based on the IP revision, one or more of
+DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
+of the EMIF IP and memory parts attached to it.
+Required properties:
+- compatible    : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
+  is the IP revision of the specific EMIF instance.
+- phy-type      : <u32> indicating the DDR phy type. Following are the
+  allowed values
+  <1>   : Attila PHY
+  <2>   : Intelli PHY
+- device-handle : phandle to a "lpddr2" node representing the memory part
+- ti,hwmods     : For TI hwmods processing and omap device creation
+  the value shall be "emif<n>" where <n> is the number of the EMIF
+  instance with base 1.
+Optional properties:
+- cs1-used              : Have this property if CS1 of this EMIF
+  instance has a memory part attached to it. If there is a memory
+  part attached to CS1, it should be the same type as the one on CS0,
+  so there is no need to give the details of this memory part.
+- cal-resistor-per-cs   : Have this property if the board has one
+  calibration resistor per chip-select.
+- hw-caps-read-idle-ctrl: Have this property if the controller
+  supports read idle window programming
+- hw-caps-dll-calib-ctrl: Have this property if the controller
+  supports dll calibration control
+- hw-caps-ll-interface  : Have this property if the controller
+  has a low latency interface and corresponding interrupt events
+- hw-caps-temp-alert    : Have this property if the controller
+  has capability for generating SDRAM temperature alerts
+Example:
+emif1: emif@0x4c000000 {
+        compatible      = "ti,emif-4d";
+        ti,hwmods       = "emif2";
+        phy-type        = <1>;
+        device-handle   = <&elpida_ECB240ABACN>;
+        cs1-used;
+        hw-caps-read-idle-ctrl;
+        hw-caps-ll-interface;
+        hw-caps-temp-alert;
+};
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
new file mode 100644
index 000000000000..f1421e2bbab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -0,0 +1,31 @@
+PXA3xx NAND DT bindings
+Required properties:
+ - compatible:          Should be "marvell,pxa3xx-nand"
+ - reg:                 The register base for the controller
+ - interrupts:          The interrupt to map
+ - #address-cells:      Set to <1> if the node includes partitions
+Optional properties:
+ - marvell,nand-enable-arbiter: Set to enable the bus arbiter
+ - marvell,nand-keep-config:    Set to keep the NAND controller config as set
+                                by the bootloader
+ - num-cs:                      Number of chipselect lines to usw
+Example:
+        nand0: nand@43100000 {
+                compatible = "marvell,pxa3xx-nand";
+                reg = <0x43100000 90>;
+                interrupts = <45>;
+                #address-cells = <1>;
+                marvell,nand-enable-arbiter;
+                marvell,nand-keep-config;
+                num-cs = <1>;
+                /* partitions (optional) */
+        };
diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
new file mode 100644
index 000000000000..8c6672a1b7d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
@@ -0,0 +1,14 @@
+* PXA RTC
+PXA specific RTC driver.
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+Examples:
+rtc@40900000 {
+        compatible = "marvell,pxa-rtc";
+        reg = <0x40900000 0x3c>;
+        interrupts = <30 31>;
+};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6d4d43858483..896824bb860a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -273,7 +273,7 @@ config ARCH_INTEGRATOR
        select ARM_AMBA
        select ARCH_HAS_CPUFREQ
        select COMMON_CLK
-        select CLK_VERSATILE
+        select COMMON_CLK_VERSATILE
        select HAVE_TCM
        select ICST
        select GENERIC_CLOCKEVENTS
@@ -288,13 +288,12 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
        bool "ARM Ltd. RealView family"
        select ARM_AMBA
-        select CLKDEV_LOOKUP
+        select COMMON_CLK
-        select HAVE_MACH_CLKDEV
+        select COMMON_CLK_VERSATILE
        select ICST
        select GENERIC_CLOCKEVENTS
        select ARCH_WANT_OPTIONAL_GPIOLIB
        select PLAT_VERSATILE
-        select PLAT_VERSATILE_CLOCK
        select PLAT_VERSATILE_CLCD
        select ARM_TIMER_SP804
        select GPIO_PL061 if GPIOLIB
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a9af4db7234c..c634f87e230e 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -17,4 +17,64 @@
                device_type = "memory";
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
+        ocp {
+                uart1: serial@44e09000 {
+                        status = "okay";
+                };
+                i2c1: i2c@44e0b000 {
+                        status = "okay";
+                        clock-frequency = <400000>;
+                        tps: tps@24 {
+                                reg = <0x24>;
+                        };
+                };
+        };
+};
+/include/ "tps65217.dtsi"
+&tps {
+        regulators {
+                dcdc1_reg: regulator@0 {
+                        regulator-always-on;
+                };
+                dcdc2_reg: regulator@1 {
+                        /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+                        regulator-name = "vdd_mpu";
+                        regulator-min-microvolt = <925000>;
+                        regulator-max-microvolt = <1325000>;
+                        regulator-boot-on;
+                        regulator-always-on;
+                };
+                dcdc3_reg: regulator@2 {
+                        /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+                        regulator-name = "vdd_core";
+                        regulator-min-microvolt = <925000>;
+                        regulator-max-microvolt = <1150000>;
+                        regulator-boot-on;
+                        regulator-always-on;
+                };
+                ldo1_reg: regulator@3 {
+                        regulator-always-on;
+                };
+                ldo2_reg: regulator@4 {
+                        regulator-always-on;
+                };
+                ldo3_reg: regulator@5 {
+                        regulator-always-on;
+                };
+                ldo4_reg: regulator@6 {
+                        regulator-always-on;
+                };
+        };
 };
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6a97d9eff72..185d6325a458 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -17,4 +17,104 @@
                device_type = "memory";
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
+        ocp {
+                uart1: serial@44e09000 {
+                        status = "okay";
+                };
+                i2c1: i2c@44e0b000 {
+                        status = "okay";
+                        clock-frequency = <400000>;
+                        tps: tps@2d {
+                                reg = <0x2d>;
+                        };
+                };
+        };
+        vbat: fixedregulator@0 {
+                compatible = "regulator-fixed";
+                regulator-name = "vbat";
+                regulator-min-microvolt = <5000000>;
+                regulator-max-microvolt = <5000000>;
+                regulator-boot-on;
+        };
+};
+/include/ "tps65910.dtsi"
+&tps {
+        vcc1-supply = <&vbat>;
+        vcc2-supply = <&vbat>;
+        vcc3-supply = <&vbat>;
+        vcc4-supply = <&vbat>;
+        vcc5-supply = <&vbat>;
+        vcc6-supply = <&vbat>;
+        vcc7-supply = <&vbat>;
+        vccio-supply = <&vbat>;
+        regulators {
+                vrtc_reg: regulator@0 {
+                        regulator-always-on;
+                };
+                vio_reg: regulator@1 {
+                        regulator-always-on;
+                };
+                vdd1_reg: regulator@2 {
+                        /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+                        regulator-name = "vdd_mpu";
+                        regulator-min-microvolt = <912500>;
+                        regulator-max-microvolt = <1312500>;
+                        regulator-boot-on;
+                        regulator-always-on;
+                };
+                vdd2_reg: regulator@3 {
+                        /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+                        regulator-name = "vdd_core";
+                        regulator-min-microvolt = <912500>;
+                        regulator-max-microvolt = <1150000>;
+                        regulator-boot-on;
+                        regulator-always-on;
+                };
+                vdd3_reg: regulator@4 {
+                        regulator-always-on;
+                };
+                vdig1_reg: regulator@5 {
+                        regulator-always-on;
+                };
+                vdig2_reg: regulator@6 {
+                        regulator-always-on;
+                };
+                vpll_reg: regulator@7 {
+                        regulator-always-on;
+                };
+                vdac_reg: regulator@8 {
+                        regulator-always-on;
+                };
+                vaux1_reg: regulator@9 {
+                        regulator-always-on;
+                };
+                vaux2_reg: regulator@10 {
+                        regulator-always-on;
+                };
+                vaux33_reg: regulator@11 {
+                        regulator-always-on;
+                };
+                vmmc_reg: regulator@12 {
+                        regulator-always-on;
+                };
+        };
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bd0cff3f808c..bb31bff01998 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -69,95 +69,146 @@
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupt-cells = <1>;
+                        reg = <0x44e07000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <96>;
                };
-                gpio2: gpio@4804C000 {
+                gpio2: gpio@4804c000 {
                        compatible = "ti,omap4-gpio";
                        ti,hwmods = "gpio2";
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupt-cells = <1>;
+                        reg = <0x4804c000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <98>;
                };
-                gpio3: gpio@481AC000 {
+                gpio3: gpio@481ac000 {
                        compatible = "ti,omap4-gpio";
                        ti,hwmods = "gpio3";
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupt-cells = <1>;
+                        reg = <0x481ac000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <32>;
                };
-                gpio4: gpio@481AE000 {
+                gpio4: gpio@481ae000 {
                        compatible = "ti,omap4-gpio";
                        ti,hwmods = "gpio4";
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupt-cells = <1>;
+                        reg = <0x481ae000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <62>;
                };
-                uart1: serial@44E09000 {
+                uart1: serial@44e09000 {
                        compatible = "ti,omap3-uart";
                        ti,hwmods = "uart1";
                        clock-frequency = <48000000>;
+                        reg = <0x44e09000 0x2000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <72>;
+                        status = "disabled";
                };
                uart2: serial@48022000 {
                        compatible = "ti,omap3-uart";
                        ti,hwmods = "uart2";
                        clock-frequency = <48000000>;
+                        reg = <0x48022000 0x2000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <73>;
+                        status = "disabled";
                };
                uart3: serial@48024000 {
                        compatible = "ti,omap3-uart";
                        ti,hwmods = "uart3";
                        clock-frequency = <48000000>;
+                        reg = <0x48024000 0x2000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <74>;
+                        status = "disabled";
                };
-                uart4: serial@481A6000 {
+                uart4: serial@481a6000 {
                        compatible = "ti,omap3-uart";
                        ti,hwmods = "uart4";
                        clock-frequency = <48000000>;
+                        reg = <0x481a6000 0x2000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <44>;
+                        status = "disabled";
                };
-                uart5: serial@481A8000 {
+                uart5: serial@481a8000 {
                        compatible = "ti,omap3-uart";
                        ti,hwmods = "uart5";
                        clock-frequency = <48000000>;
+                        reg = <0x481a8000 0x2000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <45>;
+                        status = "disabled";
                };
-                uart6: serial@481AA000 {
+                uart6: serial@481aa000 {
                        compatible = "ti,omap3-uart";
                        ti,hwmods = "uart6";
                        clock-frequency = <48000000>;
+                        reg = <0x481aa000 0x2000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <46>;
+                        status = "disabled";
                };
-                i2c1: i2c@44E0B000 {
+                i2c1: i2c@44e0b000 {
                        compatible = "ti,omap4-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "i2c1";
+                        reg = <0x44e0b000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <70>;
+                        status = "disabled";
                };
-                i2c2: i2c@4802A000 {
+                i2c2: i2c@4802a000 {
                        compatible = "ti,omap4-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "i2c2";
+                        reg = <0x4802a000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <71>;
+                        status = "disabled";
                };
-                i2c3: i2c@4819C000 {
+                i2c3: i2c@4819c000 {
                        compatible = "ti,omap4-i2c";
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "i2c3";
+                        reg = <0x4819c000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <30>;
+                        status = "disabled";
                };
                wdt2: wdt@44e35000 {
                        compatible = "ti,omap3-wdt";
                        ti,hwmods = "wd_timer2";
+                        reg = <0x44e35000 0x1000>;
+                        interrupt-parent = <&intc>;
+                        interrupts = <91>;
                };
        };
 };
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
index d79b28d9c963..a4ba31b23c88 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -166,9 +166,116 @@
                #size-cells = <0>;
                autorepeat;
                button@21 {
-                        label = "GPIO Key UP";
+                        label = "Interrupt Key";
                        linux,code = <103>;
                        gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
                };
+                key1 {
+                        label = "KEY1";
+                        linux,code = <1>;
+                        gpios = <&pca9532 0 0>;
+                };
+                key2 {
+                        label = "KEY2";
+                        linux,code = <2>;
+                        gpios = <&pca9532 1 0>;
+                };
+                key3 {
+                        label = "KEY3";
+                        linux,code = <3>;
+                        gpios = <&pca9532 2 0>;
+                };
+                key4 {
+                        label = "KEY4";
+                        linux,code = <4>;
+                        gpios = <&pca9532 3 0>;
+                };
+                joy0 {
+                        label = "Joystick Key 0";
+                        linux,code = <10>;
+                        gpios = <&gpio 2 0 0>; /* P2.0 */
+                };
+                joy1 {
+                        label = "Joystick Key 1";
+                        linux,code = <11>;
+                        gpios = <&gpio 2 1 0>; /* P2.1 */
+                };
+                joy2 {
+                        label = "Joystick Key 2";
+                        linux,code = <12>;
+                        gpios = <&gpio 2 2 0>; /* P2.2 */
+                };
+                joy3 {
+                        label = "Joystick Key 3";
+                        linux,code = <13>;
+                        gpios = <&gpio 2 3 0>; /* P2.3 */
+                };
+                joy4 {
+                        label = "Joystick Key 4";
+                        linux,code = <14>;
+                        gpios = <&gpio 2 4 0>; /* P2.4 */
+                };
+        };
+        leds {
+                compatible = "gpio-leds";
+                /* LEDs on OEM Board */
+                led1 {
+                        gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+                        linux,default-trigger = "timer";
+                        default-state = "off";
+                };
+                led2 {
+                        gpios = <&gpio 2 10 1>; /* P2.10, active low */
+                        default-state = "off";
+                };
+                led3 {
+                        gpios = <&gpio 2 11 1>; /* P2.11, active low */
+                        default-state = "off";
+                };
+                led4 {
+                        gpios = <&gpio 2 12 1>; /* P2.12, active low */
+                        default-state = "off";
+                };
+                /* LEDs on Base Board */
+                lede1 {
+                        gpios = <&pca9532 8 0>;
+                        default-state = "off";
+                };
+                lede2 {
+                        gpios = <&pca9532 9 0>;
+                        default-state = "off";
+                };
+                lede3 {
+                        gpios = <&pca9532 10 0>;
+                        default-state = "off";
+                };
+                lede4 {
+                        gpios = <&pca9532 11 0>;
+                        default-state = "off";
+                };
+                lede5 {
+                        gpios = <&pca9532 12 0>;
+                        default-state = "off";
+                };
+                lede6 {
+                        gpios = <&pca9532 13 0>;
+                        default-state = "off";
+                };
+                lede7 {
+                        gpios = <&pca9532 14 0>;
+                        default-state = "off";
+                };
+                lede8 {
+                        gpios = <&pca9532 15 0>;
+                        default-state = "off";
+                };
        };
 };
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 000000000000..f97f70f83374
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+/ {
+        elpida_ECB240ABACN: lpddr2 {
+                compatible      = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+                density         = <2048>;
+                io-width        = <32>;
+                tRPab-min-tck   = <3>;
+                tRCD-min-tck    = <3>;
+                tWR-min-tck     = <3>;
+                tRASmin-min-tck = <3>;
+                tRRD-min-tck    = <2>;
+                tWTR-min-tck    = <2>;
+                tXP-min-tck     = <2>;
+                tRTP-min-tck    = <2>;
+                tCKE-min-tck    = <3>;
+                tCKESR-min-tck  = <3>;
+                tFAW-min-tck    = <8>;
+                timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+                        compatible      = "jedec,lpddr2-timings";
+                        min-freq        = <10000000>;
+                        max-freq        = <400000000>;
+                        tRPab           = <21000>;
+                        tRCD            = <18000>;
+                        tWR             = <15000>;
+                        tRAS-min        = <42000>;
+                        tRRD            = <10000>;
+                        tWTR            = <7500>;
+                        tXP             = <7500>;
+                        tRTP            = <7500>;
+                        tCKESR          = <15000>;
+                        tDQSCK-max      = <5500>;
+                        tFAW            = <50000>;
+                        tZQCS           = <90000>;
+                        tZQCL           = <360000>;
+                        tZQinit         = <1000000>;
+                        tRAS-max-ns     = <70000>;
+                        tDQSCK-max-derated = <6000>;
+                };
+                timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+                        compatible      = "jedec,lpddr2-timings";
+                        min-freq        = <10000000>;
+                        max-freq        = <200000000>;
+                        tRPab           = <21000>;
+                        tRCD            = <18000>;
+                        tWR             = <15000>;
+                        tRAS-min        = <42000>;
+                        tRRD            = <10000>;
+                        tWTR            = <10000>;
+                        tXP             = <7500>;
+                        tRTP            = <7500>;
+                        tCKESR          = <15000>;
+                        tDQSCK-max      = <5500>;
+                        tFAW            = <50000>;
+                        tZQCS           = <90000>;
+                        tZQCL           = <360000>;
+                        tZQinit         = <1000000>;
+                        tRAS-max-ns     = <70000>;
+                        tDQSCK-max-derated = <6000>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index e3486f486b40..035c13f9d3c0 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -42,12 +42,13 @@
                                pinctrl-names = "default";
                                pinctrl-0 = <&hog_pins_a>;
-                                hog_pins_a: hog-gpios@0 {
+                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
                                                0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
                                                0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+                                                0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 20912b1d8893..384d8b66f337 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -31,6 +31,22 @@
                                bus-width = <4>;
                                status = "okay";
                        };
+                        pinctrl@80018000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&hog_pins_a>;
+                                hog_pins_a: hog@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+                                                0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+                                        >;
+                                        fsl,drive-strength = <0>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
+                        };
                };
                apbx@80040000 {
@@ -39,6 +55,47 @@
                                pinctrl-0 = <&duart_pins_a>;
                                status = "okay";
                        };
+                        auart0: serial@8006c000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&auart0_2pins_a>;
+                                status = "okay";
+                        };
+                        usbphy0: usbphy@8007c000 {
+                                status = "okay";
+                        };
+                };
+        };
+        ahb@80080000 {
+                usb0: usb@80080000 {
+                        vbus-supply = <&reg_usb0_vbus>;
+                        status = "okay";
+                };
+        };
+        regulators {
+                compatible = "simple-bus";
+                reg_usb0_vbus: usb0_vbus {
+                        compatible = "regulator-fixed";
+                        regulator-name = "usb0_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+                        gpio = <&gpio0 17 0>;
+                };
+        };
+        leds {
+                compatible = "gpio-leds";
+                user {
+                        label = "green";
+                        gpios = <&gpio2 1 0>;
+                        linux,default-trigger = "default-on";
                };
        };
 };
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 757a327ff3e8..85c3864b6a56 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -36,7 +36,7 @@
                                pinctrl-names = "default";
                                pinctrl-0 = <&hog_pins_a>;
-                                hog_pins_a: hog-gpios@0 {
+                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index e6138310e5ce..3f3b6fc229b3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -52,6 +52,7 @@
                        dma-apbh@80004000 {
                                compatible = "fsl,imx23-dma-apbh";
                                reg = <0x80004000 0x2000>;
+                                clocks = <&clks 15>;
                        };
                        ecc@80008000 {
@@ -67,6 +68,7 @@
                                reg-names = "gpmi-nand", "bch";
                                interrupts = <13>, <56>;
                                interrupt-names = "gpmi-dma", "bch";
+                                clocks = <&clks 34>;
                                fsl,gpmi-dma-channel = <4>;
                                status = "disabled";
                        };
@@ -74,6 +76,7 @@
                        ssp0: ssp@80010000 {
                                reg = <0x80010000 0x2000>;
                                interrupts = <15 14>;
+                                clocks = <&clks 33>;
                                fsl,ssp-dma-channel = <1>;
                                status = "disabled";
                        };
@@ -140,6 +143,17 @@
                                        fsl,pull-up = <0>;
                                };
+                                auart0_2pins_a: auart0-2pins@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
+                                                0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+                                        >;
+                                        fsl,drive-strength = <0>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
                                gpmi_pins_a: gpmi-nand@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
@@ -183,7 +197,6 @@
                                                0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
                                                0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
                                                0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-                                                0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
                                                0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
                                        >;
                                        fsl,drive-strength = <1>;
@@ -280,6 +293,7 @@
                        dma-apbx@80024000 {
                                compatible = "fsl,imx23-dma-apbx";
                                reg = <0x80024000 0x2000>;
+                                clocks = <&clks 16>;
                        };
                        dcp@80028000 {
@@ -306,12 +320,14 @@
                                compatible = "fsl,imx23-lcdif";
                                reg = <0x80030000 2000>;
                                interrupts = <46 45>;
+                                clocks = <&clks 38>;
                                status = "disabled";
                        };
                        ssp1: ssp@80034000 {
                                reg = <0x80034000 0x2000>;
                                interrupts = <2 20>;
+                                clocks = <&clks 33>;
                                fsl,ssp-dma-channel = <2>;
                                status = "disabled";
                        };
@@ -329,9 +345,10 @@
                        reg = <0x80040000 0x40000>;
                        ranges;
-                        clkctl@80040000 {
+                        clks: clkctrl@80040000 {
+                                compatible = "fsl,imx23-clkctrl";
                                reg = <0x80040000 0x2000>;
-                                status = "disabled";
+                                #clock-cells = <1>;
                        };
                        saif0: saif@80042000 {
@@ -383,6 +400,7 @@
                        pwm: pwm@80064000 {
                                compatible = "fsl,imx23-pwm";
                                reg = <0x80064000 0x2000>;
+                                clocks = <&clks 30>;
                                #pwm-cells = <2>;
                                fsl,pwm-number = <5>;
                                status = "disabled";
@@ -397,6 +415,7 @@
                                compatible = "fsl,imx23-auart";
                                reg = <0x8006c000 0x2000>;
                                interrupts = <24 25 23>;
+                                clocks = <&clks 32>;
                                status = "disabled";
                        };
@@ -404,6 +423,7 @@
                                compatible = "fsl,imx23-auart";
                                reg = <0x8006e000 0x2000>;
                                interrupts = <59 60 58>;
+                                clocks = <&clks 32>;
                                status = "disabled";
                        };
@@ -411,11 +431,15 @@
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x80070000 0x2000>;
                                interrupts = <0>;
+                                clocks = <&clks 32>, <&clks 16>;
+                                clock-names = "uart", "apb_pclk";
                                status = "disabled";
                        };
-                        usbphy@8007c000 {
+                        usbphy0: usbphy@8007c000 {
+                                compatible = "fsl,imx23-usbphy";
                                reg = <0x8007c000 0x2000>;
+                                clocks = <&clks 41>;
                                status = "disabled";
                        };
                };
@@ -428,8 +452,12 @@
                reg = <0x80080000 0x80000>;
                ranges;
-                usbctrl@80080000 {
+                usb0: usb@80080000 {
+                        compatible = "fsl,imx23-usb", "fsl,imx27-usb";
                        reg = <0x80080000 0x40000>;
+                        interrupts = <11>;
+                        fsl,usbphy = <&usbphy0>;
+                        clocks = <&clks 40>;
                        status = "disabled";
                };
        };
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index 2acc86cfdd05..af50469e34b2 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -23,10 +23,6 @@
        soc {
                aipi@10000000 { /* aipi */
-                        wdog@10002000 {
-                                status = "okay";
-                        };
                        serial@1000a000 {
                                fsl,uart-has-rtscts;
                                status = "okay";
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 5303ab680a34..3e54f1498841 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -62,7 +62,6 @@
                                compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
                                reg = <0x10002000 0x4000>;
                                interrupts = <27>;
-                                status = "disabled";
                        };
                        uart1: serial@1000a000 {
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index b383417a558f..5171667a7763 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -37,7 +37,7 @@
                                pinctrl-names = "default";
                                pinctrl-0 = <&hog_pins_a>;
-                                hog_pins_a: hog-gpios@0 {
+                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
new file mode 100644
index 000000000000..05c892e931e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+/ {
+        model = "Crystalfontz CFA-10049 Board";
+        compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+        apb@80000000 {
+                apbh@80000000 {
+                        pinctrl@80018000 {
+                                spi3_pins_cfa10049: spi3-cfa10049@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
+                                                0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
+                                                0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
+                                                0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+                                        >;
+                                        fsl,drive-strength = <1>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <1>;
+                                };
+                        };
+                        ssp3: ssp@80016000 {
+                                compatible = "fsl,imx28-spi";
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&spi3_pins_cfa10049>;
+                                status = "okay";
+                                gpio5: gpio5@0 {
+                                        compatible = "fairchild,74hc595";
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <0>;
+                                        registers-number = <2>;
+                                        spi-max-frequency = <100000>;
+                                };
+                                gpio6: gpio6@1 {
+                                        compatible = "fairchild,74hc595";
+                                        gpio-controller;
+                                        #gpio-cells = <2>;
+                                        reg = <1>;
+                                        registers-number = <4>;
+                                        spi-max-frequency = <100000>;
+                                };
+                        };
+                };
+                apbx@80040000 {
+                        i2c1: i2c@8005a000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&i2c1_pins_a>;
+                                status = "okay";
+                        };
+                        usbphy1: usbphy@8007e000 {
+                                status = "okay";
+                        };
+                };
+        };
+        ahb@80080000 {
+                usb1: usb@80090000 {
+                        vbus-supply = <&reg_usb1_vbus>;
+                        pinctrl-0 = <&usbphy1_pins_a>;
+                        pinctrl-names = "default";
+                        status = "okay";
+                };
+        };
+        regulators {
+                compatible = "simple-bus";
+                reg_usb1_vbus: usb1_vbus {
+                        compatible = "regulator-fixed";
+                        regulator-name = "usb1_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        gpio = <&gpio0 7 1>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 773c0e84d1fb..a0ad71ca3a44 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -46,11 +46,28 @@
                                wp-gpios = <&gpio0 28 0>;
                        };
+                        ssp2: ssp@80014000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,imx28-spi";
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&spi2_pins_a>;
+                                status = "okay";
+                                flash: m25p80@0 {
+                                        #address-cells = <1>;
+                                        #size-cells = <1>;
+                                        compatible = "sst,sst25vf016b";
+                                        spi-max-frequency = <40000000>;
+                                        reg = <0>;
+                                };
+                        };
                        pinctrl@80018000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&hog_pins_a>;
-                                hog_pins_a: hog-gpios@0 {
+                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
@@ -128,6 +145,10 @@
                                status = "okay";
                        };
+                        lradc@80050000 {
+                                status = "okay";
+                        };
                        i2c0: i2c@80058000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&i2c0_pins_a>;
@@ -140,6 +161,12 @@
                                        VDDIO-supply = <&reg_3p3v>;
                                };
+                                at24@51 {
+                                        compatible = "at24,24c32";
+                                        pagesize = <32>;
+                                        reg = <0x51>;
+                                };
                        };
                        pwm: pwm@80064000 {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 183a3fd2d859..3bab6b00c52d 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -23,6 +23,8 @@
        apb@80000000 {
                apbh@80000000 {
                        gpmi-nand@8000c000 {
+                                #address-cells = <1>;
+                                #size-cells = <1>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
                                status = "okay";
@@ -61,19 +63,40 @@
                                             &mmc0_cd_cfg
                                             &mmc0_sck_cfg>;
                                bus-width = <8>;
-                                wp-gpios = <&gpio3 10 1>;
+                                wp-gpios = <&gpio3 10 0>;
+                                vmmc-supply = <&reg_vddio_sd0>;
                                status = "okay";
                        };
+                        ssp2: ssp@80014000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "fsl,imx28-spi";
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&spi2_pins_a>;
+                                status = "okay";
+                                flash: m25p80@0 {
+                                        #address-cells = <1>;
+                                        #size-cells = <1>;
+                                        compatible = "m25p80";
+                                        spi-max-frequency = <40000000>;
+                                        reg = <0>;
+                                };
+                        };
                        pinctrl@80018000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&hog_pins_a>;
-                                hog_pins_a: hog-gpios@0 {
+                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
+                                                0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
                                                0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
                                                0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+                                                0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+                                                0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
@@ -129,6 +152,7 @@
                        i2c0: i2c@80058000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&i2c0_pins_a>;
+                                clock-frequency = <400000>;
                                status = "okay";
                                sgtl5000: codec@0a {
@@ -151,32 +175,51 @@
                                };
                        };
+                        lradc@80050000 {
+                                status = "okay";
+                        };
                        duart: serial@80074000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&duart_pins_a>;
                                status = "okay";
                        };
-                        auart0: serial@8006a000 {
+                        usbphy0: usbphy@8007c000 {
-                                pinctrl-names = "default";
-                                pinctrl-0 = <&auart0_2pins_a>;
                                status = "okay";
                        };
-                        auart3: serial@80070000 {
+                        usbphy1: usbphy@8007e000 {
+                                status = "okay";
+                        };
+                        auart0: serial@8006a000 {
                                pinctrl-names = "default";
-                                pinctrl-0 = <&auart3_pins_a>;
+                                pinctrl-0 = <&auart0_2pins_a>;
                                status = "okay";
                        };
                };
        };
        ahb@80080000 {
+                usb0: usb@80080000 {
+                        vbus-supply = <&reg_usb0_vbus>;
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&usbphy0_pins_a>;
+                        status = "okay";
+                };
+                usb1: usb@80090000 {
+                        vbus-supply = <&reg_usb1_vbus>;
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&usbphy1_pins_a>;
+                        status = "okay";
+                };
                mac0: ethernet@800f0000 {
                        phy-mode = "rmii";
                        pinctrl-names = "default";
                        pinctrl-0 = <&mac0_pins_a>;
-                        phy-reset-gpios = <&gpio3 11 0>;
                        status = "okay";
                };
@@ -198,6 +241,30 @@
                        regulator-max-microvolt = <3300000>;
                        regulator-always-on;
                };
+                reg_vddio_sd0: vddio-sd0 {
+                        compatible = "regulator-fixed";
+                        regulator-name = "vddio-sd0";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        gpio = <&gpio3 28 0>;
+                };
+                reg_usb0_vbus: usb0_vbus {
+                        compatible = "regulator-fixed";
+                        regulator-name = "usb0_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        gpio = <&gpio3 12 0>;
+                };
+                reg_usb1_vbus: usb1_vbus {
+                        compatible = "regulator-fixed";
+                        regulator-name = "usb1_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        gpio = <&gpio3 13 0>;
+                };
        };
        sound {
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 62bf767409a6..37be532f0055 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -25,7 +25,7 @@
                                pinctrl-names = "default";
                                pinctrl-0 = <&hog_pins_a>;
-                                hog_pins_a: hog-gpios@0 {
+                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
@@ -34,6 +34,24 @@
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <0>;
                                };
+                                mac0_pins_gpio: mac0-gpio-mode@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
+                                                0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
+                                                0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
+                                                0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
+                                                0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
+                                                0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
+                                                0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
+                                                0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
+                                                0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+                                        >;
+                                        fsl,drive-strength = <0>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
                        };
                };
@@ -72,8 +90,9 @@
        ahb@80080000 {
                mac0: ethernet@800f0000 {
                        phy-mode = "rmii";
-                        pinctrl-names = "default";
+                        pinctrl-names = "default", "gpio_mode";
                        pinctrl-0 = <&mac0_pins_a>;
+                        pinctrl-1 = <&mac0_pins_gpio>;
                        status = "okay";
                };
        };
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 3fa6d190fab4..724147eab84b 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -27,6 +27,8 @@
                serial2 = &auart2;
                serial3 = &auart3;
                serial4 = &auart4;
+                ethernet0 = &mac0;
+                ethernet1 = &mac1;
        };
        cpus {
@@ -65,6 +67,7 @@
                        dma-apbh@80004000 {
                                compatible = "fsl,imx28-dma-apbh";
                                reg = <0x80004000 0x2000>;
+                                clocks = <&clks 25>;
                        };
                        perfmon@80006000 {
@@ -81,34 +84,47 @@
                                reg-names = "gpmi-nand", "bch";
                                interrupts = <88>, <41>;
                                interrupt-names = "gpmi-dma", "bch";
+                                clocks = <&clks 50>;
                                fsl,gpmi-dma-channel = <4>;
                                status = "disabled";
                        };
                        ssp0: ssp@80010000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
                                reg = <0x80010000 0x2000>;
                                interrupts = <96 82>;
+                                clocks = <&clks 46>;
                                fsl,ssp-dma-channel = <0>;
                                status = "disabled";
                        };
                        ssp1: ssp@80012000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
                                reg = <0x80012000 0x2000>;
                                interrupts = <97 83>;
+                                clocks = <&clks 47>;
                                fsl,ssp-dma-channel = <1>;
                                status = "disabled";
                        };
                        ssp2: ssp@80014000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
                                reg = <0x80014000 0x2000>;
                                interrupts = <98 84>;
+                                clocks = <&clks 48>;
                                fsl,ssp-dma-channel = <2>;
                                status = "disabled";
                        };
                        ssp3: ssp@80016000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
                                reg = <0x80016000 0x2000>;
                                interrupts = <99 85>;
+                                clocks = <&clks 49>;
                                fsl,ssp-dma-channel = <3>;
                                status = "disabled";
                        };
@@ -410,6 +426,28 @@
                                        fsl,pull-up = <1>;
                                };
+                                i2c0_pins_b: i2c0@1 {
+                                        reg = <1>;
+                                        fsl,pinmux-ids = <
+                                                0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
+                                                0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+                                        >;
+                                        fsl,drive-strength = <1>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <1>;
+                                };
+                                i2c1_pins_a: i2c1@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
+                                                0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+                                        >;
+                                        fsl,drive-strength = <1>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <1>;
+                                };
                                saif0_pins_a: saif0@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
@@ -453,6 +491,16 @@
                                        fsl,pull-up = <0>;
                                };
+                                pwm4_pins_a: pwm4@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+                                        >;
+                                        fsl,drive-strength = <0>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
                                lcdif_24bit_pins_a: lcdif-24bit@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
@@ -507,6 +555,49 @@
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <0>;
                                };
+                                spi2_pins_a: spi2@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
+                                                0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
+                                                0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
+                                                0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+                                        >;
+                                        fsl,drive-strength = <1>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <1>;
+                                };
+                                usbphy0_pins_a: usbphy0@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+                                        >;
+                                        fsl,drive-strength = <2>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
+                                usbphy0_pins_b: usbphy0@1 {
+                                        reg = <1>;
+                                        fsl,pinmux-ids = <
+                                                0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+                                        >;
+                                        fsl,drive-strength = <2>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
+                                usbphy1_pins_a: usbphy1@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
+                                                0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+                                        >;
+                                        fsl,drive-strength = <2>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
                        };
                        digctl@8001c000 {
@@ -523,6 +614,7 @@
                        dma-apbx@80024000 {
                                compatible = "fsl,imx28-dma-apbx";
                                reg = <0x80024000 0x2000>;
+                                clocks = <&clks 26>;
                        };
                        dcp@80028000 {
@@ -551,6 +643,7 @@
                                compatible = "fsl,imx28-lcdif";
                                reg = <0x80030000 0x2000>;
                                interrupts = <38 86>;
+                                clocks = <&clks 55>;
                                status = "disabled";
                        };
@@ -558,6 +651,8 @@
                                compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
                                reg = <0x80032000 0x2000>;
                                interrupts = <8>;
+                                clocks = <&clks 58>, <&clks 58>;
+                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
@@ -565,6 +660,8 @@
                                compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
                                reg = <0x80034000 0x2000>;
                                interrupts = <9>;
+                                clocks = <&clks 59>, <&clks 59>;
+                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
@@ -611,15 +708,17 @@
                        reg = <0x80040000 0x40000>;
                        ranges;
-                        clkctl@80040000 {
+                        clks: clkctrl@80040000 {
+                                compatible = "fsl,imx28-clkctrl";
                                reg = <0x80040000 0x2000>;
-                                status = "disabled";
+                                #clock-cells = <1>;
                        };
                        saif0: saif@80042000 {
                                compatible = "fsl,imx28-saif";
                                reg = <0x80042000 0x2000>;
                                interrupts = <59 80>;
+                                clocks = <&clks 53>;
                                fsl,saif-dma-channel = <4>;
                                status = "disabled";
                        };
@@ -633,12 +732,16 @@
                                compatible = "fsl,imx28-saif";
                                reg = <0x80046000 0x2000>;
                                interrupts = <58 81>;
+                                clocks = <&clks 54>;
                                fsl,saif-dma-channel = <5>;
                                status = "disabled";
                        };
                        lradc@80050000 {
+                                compatible = "fsl,imx28-lradc";
                                reg = <0x80050000 0x2000>;
+                                interrupts = <10 14 15 16 17 18 19
+                                                20 21 22 23 24 25>;
                                status = "disabled";
                        };
@@ -677,6 +780,7 @@
                        pwm: pwm@80064000 {
                                compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
                                reg = <0x80064000 0x2000>;
+                                clocks = <&clks 44>;
                                #pwm-cells = <2>;
                                fsl,pwm-number = <8>;
                                status = "disabled";
@@ -691,6 +795,7 @@
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x8006a000 0x2000>;
                                interrupts = <112 70 71>;
+                                clocks = <&clks 45>;
                                status = "disabled";
                        };
@@ -698,6 +803,7 @@
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x8006c000 0x2000>;
                                interrupts = <113 72 73>;
+                                clocks = <&clks 45>;
                                status = "disabled";
                        };
@@ -705,6 +811,7 @@
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x8006e000 0x2000>;
                                interrupts = <114 74 75>;
+                                clocks = <&clks 45>;
                                status = "disabled";
                        };
@@ -712,6 +819,7 @@
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x80070000 0x2000>;
                                interrupts = <115 76 77>;
+                                clocks = <&clks 45>;
                                status = "disabled";
                        };
@@ -719,6 +827,7 @@
                                compatible = "fsl,imx28-auart", "fsl,imx23-auart";
                                reg = <0x80072000 0x2000>;
                                interrupts = <116 78 79>;
+                                clocks = <&clks 45>;
                                status = "disabled";
                        };
@@ -726,18 +835,22 @@
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0x80074000 0x1000>;
                                interrupts = <47>;
+                                clocks = <&clks 45>, <&clks 26>;
+                                clock-names = "uart", "apb_pclk";
                                status = "disabled";
                        };
                        usbphy0: usbphy@8007c000 {
                                compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
                                reg = <0x8007c000 0x2000>;
+                                clocks = <&clks 62>;
                                status = "disabled";
                        };
                        usbphy1: usbphy@8007e000 {
                                compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
                                reg = <0x8007e000 0x2000>;
+                                clocks = <&clks 63>;
                                status = "disabled";
                        };
                };
@@ -754,6 +867,7 @@
                        compatible = "fsl,imx28-usb", "fsl,imx27-usb";
                        reg = <0x80080000 0x10000>;
                        interrupts = <93>;
+                        clocks = <&clks 60>;
                        fsl,usbphy = <&usbphy0>;
                        status = "disabled";
                };
@@ -762,6 +876,7 @@
                        compatible = "fsl,imx28-usb", "fsl,imx27-usb";
                        reg = <0x80090000 0x10000>;
                        interrupts = <92>;
+                        clocks = <&clks 61>;
                        fsl,usbphy = <&usbphy1>;
                        status = "disabled";
                };
@@ -775,6 +890,8 @@
                        compatible = "fsl,imx28-fec";
                        reg = <0x800f0000 0x4000>;
                        interrupts = <101>;
+                        clocks = <&clks 57>, <&clks 57>;
+                        clock-names = "ipg", "ahb";
                        status = "disabled";
                };
@@ -782,6 +899,8 @@
                        compatible = "fsl,imx28-fec";
                        reg = <0x800f4000 0x4000>;
                        interrupts = <102>;
+                        clocks = <&clks 57>, <&clks 57>;
+                        clock-names = "ipg", "ahb";
                        status = "disabled";
                };
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 59d9789e5508..cbd2b1c7487b 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,23 +25,31 @@
                aips@70000000 { /* aips-1 */
                        spba@70000000 {
                                esdhc@70004000 { /* ESDHC1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc1_1>;
                                        fsl,cd-controller;
                                        fsl,wp-controller;
                                        status = "okay";
                                };
                                esdhc@70008000 { /* ESDHC2 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc2_1>;
                                        cd-gpios = <&gpio1 6 0>;
                                        wp-gpios = <&gpio1 5 0>;
                                        status = "okay";
                                };
                                uart3: serial@7000c000 {
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_uart3_1>;
                                        fsl,uart-has-rtscts;
                                        status = "okay";
                                };
                                ecspi@70010000 { /* ECSPI1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_ecspi1_1>;
                                        fsl,spi-num-chipselects = <2>;
                                        cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
                                        status = "okay";
@@ -169,31 +177,43 @@
                                };
                        };
-                        wdog@73f98000 { /* WDOG1 */
-                                status = "okay";
-                        };
                        iomuxc@73fa8000 {
-                                compatible = "fsl,imx51-iomuxc-babbage";
+                                pinctrl-names = "default";
-                                reg = <0x73fa8000 0x4000>;
+                                pinctrl-0 = <&pinctrl_hog>;
+                                hog {
+                                        pinctrl_hog: hoggrp {
+                                                fsl,pins = <
+                                                        694  0x20d5     /* MX51_PAD_GPIO1_0__SD1_CD */
+                                                        697  0x20d5     /* MX51_PAD_GPIO1_1__SD1_WP */
+                                                        737  0x100      /* MX51_PAD_GPIO1_5__GPIO1_5 */
+                                                        740  0x100      /* MX51_PAD_GPIO1_6__GPIO1_6 */
+                                                        121  0x5        /* MX51_PAD_EIM_A27__GPIO2_21 */
+                                                        402  0x85       /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+                                                        405  0x85       /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+                                                >;
+                                        };
+                                };
                        };
                        uart1: serial@73fbc000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart1_1>;
                                fsl,uart-has-rtscts;
                                status = "okay";
                        };
                        uart2: serial@73fc0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart2_1>;
                                status = "okay";
                        };
                };
                aips@80000000 { /* aips-2 */
-                        sdma@83fb0000 {
-                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
-                        };
                        i2c@83fc4000 { /* I2C2 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_i2c2_1>;
                                status = "okay";
                                sgtl5000: codec@0a {
@@ -206,10 +226,14 @@
                        };
                        audmux@83fd0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_audmux_1>;
                                status = "okay";
                        };
                        ethernet@83fec000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_fec_1>;
                                phy-mode = "mii";
                                status = "okay";
                        };
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index aba28dc87fc8..2f71a91ca98e 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -130,6 +130,34 @@
                                };
                        };
+                        usb@73f80000 {
+                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+                                reg = <0x73f80000 0x0200>;
+                                interrupts = <18>;
+                                status = "disabled";
+                        };
+                        usb@73f80200 {
+                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+                                reg = <0x73f80200 0x0200>;
+                                interrupts = <14>;
+                                status = "disabled";
+                        };
+                        usb@73f80400 {
+                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+                                reg = <0x73f80400 0x0200>;
+                                interrupts = <16>;
+                                status = "disabled";
+                        };
+                        usb@73f80600 {
+                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+                                reg = <0x73f80600 0x0200>;
+                                interrupts = <17>;
+                                status = "disabled";
+                        };
                        gpio1: gpio@73f84000 {
                                compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
                                reg = <0x73f84000 0x4000>;
@@ -174,7 +202,6 @@
                                compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
                                reg = <0x73f98000 0x4000>;
                                interrupts = <58>;
-                                status = "disabled";
                        };
                        wdog@73f9c000 { /* WDOG2 */
@@ -184,6 +211,122 @@
                                status = "disabled";
                        };
+                        iomuxc@73fa8000 {
+                                compatible = "fsl,imx51-iomuxc";
+                                reg = <0x73fa8000 0x4000>;
+                                audmux {
+                                        pinctrl_audmux_1: audmuxgrp-1 {
+                                                fsl,pins = <
+                                                        384 0x80000000  /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+                                                        386 0x80000000  /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+                                                        389 0x80000000  /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+                                                        391 0x80000000  /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+                                                >;
+                                        };
+                                };
+                                fec {
+                                        pinctrl_fec_1: fecgrp-1 {
+                                                fsl,pins = <
+                                                        128 0x80000000  /* MX51_PAD_EIM_EB2__FEC_MDIO */
+                                                        134 0x80000000  /* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+                                                        146 0x80000000  /* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+                                                        152 0x80000000  /* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+                                                        158 0x80000000  /* MX51_PAD_EIM_CS4__FEC_RX_ER */
+                                                        165 0x80000000  /* MX51_PAD_EIM_CS5__FEC_CRS */
+                                                        206 0x80000000  /* MX51_PAD_NANDF_RB2__FEC_COL */
+                                                        213 0x80000000  /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+                                                        293 0x80000000  /* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+                                                        298 0x80000000  /* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+                                                        225 0x80000000  /* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+                                                        231 0x80000000  /* MX51_PAD_NANDF_CS3__FEC_MDC */
+                                                        237 0x80000000  /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+                                                        243 0x80000000  /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+                                                        250 0x80000000  /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+                                                        255 0x80000000  /* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+                                                        260 0x80000000  /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+                                                >;
+                                        };
+                                };
+                                ecspi1 {
+                                        pinctrl_ecspi1_1: ecspi1grp-1 {
+                                                fsl,pins = <
+                                                        398 0x185       /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+                                                        394 0x185       /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+                                                        409 0x185       /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+                                                >;
+                                        };
+                                };
+                                esdhc1 {
+                                        pinctrl_esdhc1_1: esdhc1grp-1 {
+                                                fsl,pins = <
+                                                        666 0x400020d5  /* MX51_PAD_SD1_CMD__SD1_CMD */
+                                                        669 0x20d5      /* MX51_PAD_SD1_CLK__SD1_CLK */
+                                                        672 0x20d5      /* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+                                                        678 0x20d5      /* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+                                                        684 0x20d5      /* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+                                                        691 0x20d5      /* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+                                                >;
+                                        };
+                                };
+                                esdhc2 {
+                                        pinctrl_esdhc2_1: esdhc2grp-1 {
+                                                fsl,pins = <
+                                                        704 0x400020d5  /* MX51_PAD_SD2_CMD__SD2_CMD */
+                                                        707 0x20d5      /* MX51_PAD_SD2_CLK__SD2_CLK */
+                                                        710 0x20d5      /* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+                                                        712 0x20d5      /* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+                                                        715 0x20d5      /* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+                                                        719 0x20d5      /* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+                                                >;
+                                        };
+                                };
+                                i2c2 {
+                                        pinctrl_i2c2_1: i2c2grp-1 {
+                                                fsl,pins = <
+                                                        449 0x400001ed  /* MX51_PAD_KEY_COL4__I2C2_SCL */
+                                                        454 0x400001ed  /* MX51_PAD_KEY_COL5__I2C2_SDA */
+                                                >;
+                                        };
+                                };
+                                uart1 {
+                                        pinctrl_uart1_1: uart1grp-1 {
+                                                fsl,pins = <
+                                                        413 0x1c5       /* MX51_PAD_UART1_RXD__UART1_RXD */
+                                                        416 0x1c5       /* MX51_PAD_UART1_TXD__UART1_TXD */
+                                                        418 0x1c5       /* MX51_PAD_UART1_RTS__UART1_RTS */
+                                                        420 0x1c5       /* MX51_PAD_UART1_CTS__UART1_CTS */
+                                                >;
+                                        };
+                                };
+                                uart2 {
+                                        pinctrl_uart2_1: uart2grp-1 {
+                                                fsl,pins = <
+                                                        423 0x1c5       /* MX51_PAD_UART2_RXD__UART2_RXD */
+                                                        426 0x1c5       /* MX51_PAD_UART2_TXD__UART2_TXD */
+                                                >;
+                                        };
+                                };
+                                uart3 {
+                                        pinctrl_uart3_1: uart3grp-1 {
+                                                fsl,pins = <
+                                                        54 0x1c5        /* MX51_PAD_EIM_D25__UART3_RXD */
+                                                        59 0x1c5        /* MX51_PAD_EIM_D26__UART3_TXD */
+                                                        65 0x1c5        /* MX51_PAD_EIM_D27__UART3_RTS */
+                                                        49 0x1c5        /* MX51_PAD_EIM_D24__UART3_CTS */
+                                                >;
+                                        };
+                                };
+                        };
                        uart1: serial@73fbc000 {
                                compatible = "fsl,imx51-uart", "fsl,imx21-uart";
                                reg = <0x73fbc000 0x4000>;
@@ -219,6 +362,7 @@
                                compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
                                reg = <0x83fb0000 0x4000>;
                                interrupts = <6>;
+                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
                        };
                        cspi@83fc0000 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index da895e93a999..4be76f223526 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -25,31 +25,66 @@
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc1_2>;
                                        cd-gpios = <&gpio1 1 0>;
                                        wp-gpios = <&gpio1 9 0>;
                                        status = "okay";
                                };
                        };
-                        wdog@53f98000 { /* WDOG1 */
-                                status = "okay";
-                        };
                        iomuxc@53fa8000 {
-                                compatible = "fsl,imx53-iomuxc-ard";
+                                pinctrl-names = "default";
-                                reg = <0x53fa8000 0x4000>;
+                                pinctrl-0 = <&pinctrl_hog>;
+                                hog {
+                                        pinctrl_hog: hoggrp {
+                                                fsl,pins = <
+                                                        1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
+                                                        1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
+                                                        486  0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
+                                                        739  0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
+                                                        218  0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
+                                                        226  0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
+                                                        233  0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
+                                                        241  0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
+                                                        429  0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
+                                                        435  0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
+                                                        441  0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
+                                                        448  0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
+                                                        456  0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
+                                                        464  0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
+                                                        471  0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
+                                                        477  0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
+                                                        492  0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
+                                                        500  0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
+                                                        508  0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
+                                                        516  0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
+                                                        524  0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
+                                                        532  0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
+                                                        540  0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
+                                                        548  0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
+                                                        637  0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
+                                                        642  0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
+                                                        647  0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
+                                                        652  0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
+                                                        657  0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
+                                                        662  0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
+                                                        667  0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
+                                                        611  0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
+                                                        616  0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
+                                                        607  0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
+                                                >;
+                                        };
+                                };
                        };
                        uart1: serial@53fbc000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart1_2>;
                                status = "okay";
                        };
                };
-                aips@60000000 { /* AIPS2 */
-                        sdma@63fb0000 {
-                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-                        };
-                };
        };
        eim-cs1@f4000000 {
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index 9c798034675e..a124d1e25258 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -25,12 +25,16 @@
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc1_1>;
                                        cd-gpios = <&gpio3 13 0>;
                                        wp-gpios = <&gpio3 14 0>;
                                        status = "okay";
                                };
                                ecspi@50010000 { /* ECSPI1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_ecspi1_1>;
                                        fsl,spi-num-chipselects = <2>;
                                        cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
                                        status = "okay";
@@ -56,32 +60,45 @@
                                };
                                esdhc@50020000 { /* ESDHC3 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc3_1>;
                                        cd-gpios = <&gpio3 11 0>;
                                        wp-gpios = <&gpio3 12 0>;
                                        status = "okay";
                                };
                        };
-                        wdog@53f98000 { /* WDOG1 */
-                                status = "okay";
-                        };
                        iomuxc@53fa8000 {
-                                compatible = "fsl,imx53-iomuxc-evk";
+                                pinctrl-names = "default";
-                                reg = <0x53fa8000 0x4000>;
+                                pinctrl-0 = <&pinctrl_hog>;
+                                hog {
+                                        pinctrl_hog: hoggrp {
+                                                fsl,pins = <
+                                                        424  0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+                                                        449  0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+                                                        693  0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+                                                        697  0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+                                                        701  0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+                                                        705  0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */
+                                                        868  0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+                                                        873  0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+                                                >;
+                                        };
+                                };
                        };
                        uart1: serial@53fbc000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart1_1>;
                                status = "okay";
                        };
                };
                aips@60000000 { /* AIPS2 */
-                        sdma@63fb0000 {
-                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-                        };
                        i2c@63fc4000 { /* I2C2 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_i2c2_1>;
                                status = "okay";
                                pmic: mc13892@08 {
@@ -96,6 +113,8 @@
                        };
                        ethernet@63fec000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_fec_1>;
                                phy-mode = "rmii";
                                phy-reset-gpios = <&gpio7 6 0>;
                                status = "okay";
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 2d803a9a6949..08948af86d1a 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -25,6 +25,8 @@
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc1_1>;
                                        cd-gpios = <&gpio3 13 0>;
                                        status = "okay";
                                };
@@ -35,32 +37,46 @@
                                };
                                esdhc@50020000 { /* ESDHC3 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc3_1>;
                                        cd-gpios = <&gpio3 11 0>;
                                        wp-gpios = <&gpio3 12 0>;
                                        status = "okay";
                                };
                        };
-                        wdog@53f98000 { /* WDOG1 */
-                                status = "okay";
-                        };
                        iomuxc@53fa8000 {
-                                compatible = "fsl,imx53-iomuxc-qsb";
+                                pinctrl-names = "default";
-                                reg = <0x53fa8000 0x4000>;
+                                pinctrl-0 = <&pinctrl_hog>;
+                                hog {
+                                        pinctrl_hog: hoggrp {
+                                                fsl,pins = <
+                                                        1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */
+                                                        1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */
+                                                        982  0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+                                                        989  0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+                                                        693  0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */
+                                                        697  0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
+                                                        701  0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+                                                        868  0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+                                                        873  0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
+                                                >;
+                                        };
+                                };
                        };
                        uart1: serial@53fbc000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart1_1>;
                                status = "okay";
                        };
                };
                aips@60000000 { /* AIPS2 */
-                        sdma@63fb0000 {
-                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-                        };
                        i2c@63fc4000 { /* I2C2 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_i2c2_1>;
                                status = "okay";
                                sgtl5000: codec@0a {
@@ -72,6 +88,8 @@
                        };
                        i2c@63fc8000 { /* I2C1 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_i2c1_1>;
                                status = "okay";
                                accelerometer: mma8450@1c {
@@ -158,10 +176,14 @@
                        };
                        audmux@63fd0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_audmux_1>;
                                status = "okay";
                        };
                        ethernet@63fec000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_fec_1>;
                                phy-mode = "rmii";
                                phy-reset-gpios = <&gpio7 6 0>;
                                status = "okay";
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 08091029168e..06c68580c842 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -25,22 +25,30 @@
                aips@50000000 { /* AIPS1 */
                        spba@50000000 {
                                esdhc@50004000 { /* ESDHC1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc1_1>;
                                        cd-gpios = <&gpio3 13 0>;
                                        wp-gpios = <&gpio4 11 0>;
                                        status = "okay";
                                };
                                esdhc@50008000 { /* ESDHC2 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc2_1>;
                                        non-removable;
                                        status = "okay";
                                };
                                uart3: serial@5000c000 {
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_uart3_1>;
                                        fsl,uart-has-rtscts;
                                        status = "okay";
                                };
                                ecspi@50010000 { /* ECSPI1 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_ecspi1_1>;
                                        fsl,spi-num-chipselects = <2>;
                                        cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
                                        status = "okay";
@@ -72,35 +80,49 @@
                                };
                                esdhc@50020000 { /* ESDHC3 */
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_esdhc3_1>;
                                        non-removable;
                                        status = "okay";
                                };
                        };
-                        wdog@53f98000 { /* WDOG1 */
-                                status = "okay";
-                        };
                        iomuxc@53fa8000 {
-                                compatible = "fsl,imx53-iomuxc-smd";
+                                pinctrl-names = "default";
-                                reg = <0x53fa8000 0x4000>;
+                                pinctrl-0 = <&pinctrl_hog>;
+                                hog {
+                                        pinctrl_hog: hoggrp {
+                                                fsl,pins = <
+                                                        982  0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */
+                                                        989  0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */
+                                                        424  0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */
+                                                        701  0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
+                                                        449  0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */
+                                                        43   0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */
+                                                        868  0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+                                                >;
+                                        };
+                                };
                        };
                        uart1: serial@53fbc000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart1_1>;
                                status = "okay";
                        };
                        uart2: serial@53fc0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart2_1>;
                                status = "okay";
                        };
                };
                aips@60000000 { /* AIPS2 */
-                        sdma@63fb0000 {
-                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-                        };
                        i2c@63fc4000 { /* I2C2 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_i2c2_1>;
                                status = "okay";
                                codec: sgtl5000@0a {
@@ -120,6 +142,8 @@
                        };
                        i2c@63fc8000 { /* I2C1 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_i2c1_1>;
                                status = "okay";
                                accelerometer: mma8450@1c {
@@ -139,6 +163,8 @@
                        };
                        ethernet@63fec000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_fec_1>;
                                phy-mode = "rmii";
                                phy-reset-gpios = <&gpio7 6 0>;
                                status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index cd37165edce5..221cf3321b0a 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -135,6 +135,34 @@
                                };
                        };
+                        usb@53f80000 {
+                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+                                reg = <0x53f80000 0x0200>;
+                                interrupts = <18>;
+                                status = "disabled";
+                        };
+                        usb@53f80200 {
+                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+                                reg = <0x53f80200 0x0200>;
+                                interrupts = <14>;
+                                status = "disabled";
+                        };
+                        usb@53f80400 {
+                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+                                reg = <0x53f80400 0x0200>;
+                                interrupts = <16>;
+                                status = "disabled";
+                        };
+                        usb@53f80600 {
+                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+                                reg = <0x53f80600 0x0200>;
+                                interrupts = <17>;
+                                status = "disabled";
+                        };
                        gpio1: gpio@53f84000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
                                reg = <0x53f84000 0x4000>;
@@ -179,7 +207,6 @@
                                compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
                                reg = <0x53f98000 0x4000>;
                                interrupts = <58>;
-                                status = "disabled";
                        };
                        wdog@53f9c000 { /* WDOG2 */
@@ -189,6 +216,161 @@
                                status = "disabled";
                        };
+                        iomuxc@53fa8000 {
+                                compatible = "fsl,imx53-iomuxc";
+                                reg = <0x53fa8000 0x4000>;
+                                audmux {
+                                        pinctrl_audmux_1: audmuxgrp-1 {
+                                                fsl,pins = <
+                                                        10 0x80000000   /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
+                                                        17 0x80000000   /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
+                                                        23 0x80000000   /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
+                                                        30 0x80000000   /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
+                                                >;
+                                        };
+                                };
+                                fec {
+                                        pinctrl_fec_1: fecgrp-1 {
+                                                fsl,pins = <
+                                                        820 0x80000000  /* MX53_PAD_FEC_MDC__FEC_MDC */
+                                                        779 0x80000000  /* MX53_PAD_FEC_MDIO__FEC_MDIO */
+                                                        786 0x80000000  /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
+                                                        791 0x80000000  /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
+                                                        796 0x80000000  /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
+                                                        799 0x80000000  /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
+                                                        804 0x80000000  /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
+                                                        808 0x80000000  /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
+                                                        811 0x80000000  /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
+                                                        816 0x80000000  /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
+                                                >;
+                                        };
+                                };
+                                ecspi1 {
+                                        pinctrl_ecspi1_1: ecspi1grp-1 {
+                                                fsl,pins = <
+                                                        433 0x80000000  /* MX53_PAD_EIM_D16__ECSPI1_SCLK */
+                                                        439 0x80000000  /* MX53_PAD_EIM_D17__ECSPI1_MISO */
+                                                        445 0x80000000  /* MX53_PAD_EIM_D18__ECSPI1_MOSI */
+                                                >;
+                                        };
+                                };
+                                esdhc1 {
+                                        pinctrl_esdhc1_1: esdhc1grp-1 {
+                                                fsl,pins = <
+                                                        995  0x1d5      /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+                                                        1000 0x1d5      /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+                                                        1010 0x1d5      /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+                                                        1024 0x1d5      /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+                                                        1005 0x1d5      /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+                                                        1018 0x1d5      /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+                                                >;
+                                        };
+                                        pinctrl_esdhc1_2: esdhc1grp-2 {
+                                                fsl,pins = <
+                                                        995  0x1d5      /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
+                                                        1000 0x1d5      /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
+                                                        1010 0x1d5      /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
+                                                        1024 0x1d5      /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
+                                                        941  0x1d5      /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
+                                                        948  0x1d5      /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
+                                                        955  0x1d5      /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
+                                                        962  0x1d5      /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
+                                                        1005 0x1d5      /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
+                                                        1018 0x1d5      /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
+                                                >;
+                                        };
+                                };
+                                esdhc2 {
+                                        pinctrl_esdhc2_1: esdhc2grp-1 {
+                                                fsl,pins = <
+                                                        1038 0x1d5      /* MX53_PAD_SD2_CMD__ESDHC2_CMD */
+                                                        1032 0x1d5      /* MX53_PAD_SD2_CLK__ESDHC2_CLK */
+                                                        1062 0x1d5      /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
+                                                        1056 0x1d5      /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
+                                                        1050 0x1d5      /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
+                                                        1044 0x1d5      /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
+                                                >;
+                                        };
+                                };
+                                esdhc3 {
+                                        pinctrl_esdhc3_1: esdhc3grp-1 {
+                                                fsl,pins = <
+                                                        943 0x1d5       /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
+                                                        950 0x1d5       /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
+                                                        957 0x1d5       /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
+                                                        964 0x1d5       /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
+                                                        893 0x1d5       /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
+                                                        900 0x1d5       /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
+                                                        906 0x1d5       /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
+                                                        912 0x1d5       /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
+                                                        857 0x1d5       /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
+                                                        863 0x1d5       /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
+                                                >;
+                                        };
+                                };
+                                i2c1 {
+                                        pinctrl_i2c1_1: i2c1grp-1 {
+                                                fsl,pins = <
+                                                        333 0xc0000000  /* MX53_PAD_CSI0_DAT8__I2C1_SDA */
+                                                        341 0xc0000000  /* MX53_PAD_CSI0_DAT9__I2C1_SCL */
+                                                >;
+                                        };
+                                };
+                                i2c2 {
+                                        pinctrl_i2c2_1: i2c2grp-1 {
+                                                fsl,pins = <
+                                                        61 0xc0000000   /* MX53_PAD_KEY_ROW3__I2C2_SDA */
+                                                        53 0xc0000000   /* MX53_PAD_KEY_COL3__I2C2_SCL */
+                                                >;
+                                        };
+                                };
+                                uart1 {
+                                        pinctrl_uart1_1: uart1grp-1 {
+                                                fsl,pins = <
+                                                        346 0x1c5       /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
+                                                        354 0x1c5       /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
+                                                >;
+                                        };
+                                        pinctrl_uart1_2: uart1grp-2 {
+                                                fsl,pins = <
+                                                        828 0x1c5       /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
+                                                        832 0x1c5       /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
+                                                >;
+                                        };
+                                };
+                                uart2 {
+                                        pinctrl_uart2_1: uart2grp-1 {
+                                                fsl,pins = <
+                                                        841 0x1c5       /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
+                                                        836 0x1c5       /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
+                                                >;
+                                        };
+                                };
+                                uart3 {
+                                        pinctrl_uart3_1: uart3grp-1 {
+                                                fsl,pins = <
+                                                        884 0x1c5       /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
+                                                        888 0x1c5       /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
+                                                        875 0x1c5       /* MX53_PAD_PATA_DA_1__UART3_CTS */
+                                                        880 0x1c5       /* MX53_PAD_PATA_DA_2__UART3_RTS */
+                                                >;
+                                        };
+                                };
+                        };
                        uart1: serial@53fbc000 {
                                compatible = "fsl,imx53-uart", "fsl,imx21-uart";
                                reg = <0x53fbc000 0x4000>;
@@ -203,6 +385,20 @@
                                status = "disabled";
                        };
+                        can1: can@53fc8000 {
+                                compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+                                reg = <0x53fc8000 0x4000>;
+                                interrupts = <82>;
+                                status = "disabled";
+                        };
+                        can2: can@53fcc000 {
+                                compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+                                reg = <0x53fcc000 0x4000>;
+                                interrupts = <83>;
+                                status = "disabled";
+                        };
                        gpio5: gpio@53fdc000 {
                                compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
                                reg = <0x53fdc000 0x4000>;
@@ -277,6 +473,7 @@
                                compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
                                reg = <0x63fb0000 0x4000>;
                                interrupts = <6>;
+                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
                        };
                        cspi@63fc0000 {
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index d792581672cc..15df4c105e89 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -28,8 +28,27 @@
                        status = "disabled"; /* gpmi nand conflicts with SD */
                };
+                aips-bus@02000000 { /* AIPS1 */
+                        iomuxc@020e0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_hog>;
+                                hog {
+                                        pinctrl_hog: hoggrp {
+                                                fsl,pins = <
+                                                        176  0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+                                                        1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+                                                        1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+                                                >;
+                                        };
+                                };
+                        };
+                };
                aips-bus@02100000 { /* AIPS2 */
                        ethernet@02188000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_enet_2>;
                                phy-mode = "rgmii";
                                status = "okay";
                        };
@@ -52,6 +71,8 @@
                        };
                        uart4: serial@021f0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_uart4_1>;
                                status = "okay";
                        };
                };
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 72f30f3e6171..d152328285a1 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -46,15 +46,20 @@
                        iomuxc@020e0000 {
                                pinctrl-names = "default";
-                                pinctrl-0 = <&pinctrl_gpio_hog>;
+                                pinctrl-0 = <&pinctrl_hog>;
-                                gpios {
+                                hog {
-                                        pinctrl_gpio_hog: gpiohog {
+                                        pinctrl_hog: hoggrp {
                                                fsl,pins = <
-                                                           144  0x80000000      /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+                                                        1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
-                                                           121  0x80000000      /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+                                                        1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
-                                                           953  0x80000000      /* MX6Q_PAD_GPIO_0__CCM_CLKO */
+                                                        121  0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
-                                                           >;
+                                                        144  0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+                                                        152  0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+                                                        1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+                                                        1270 0x1f0b0    /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+                                                        953  0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
+                                                >;
                                        };
                                };
                        };
@@ -63,6 +68,9 @@
                aips-bus@02100000 { /* AIPS2 */
                        usb@02184000 { /* USB OTG */
                                vbus-supply = <&reg_usb_otg_vbus>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_usbotg_1>;
+                                disable-over-current;
                                status = "okay";
                        };
@@ -71,12 +79,16 @@
                        };
                        ethernet@02188000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_enet_1>;
                                phy-mode = "rgmii";
                                phy-reset-gpios = <&gpio3 23 0>;
                                status = "okay";
                        };
                        usdhc@02198000 { /* uSDHC3 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_usdhc3_2>;
                                cd-gpios = <&gpio7 0 0>;
                                wp-gpios = <&gpio7 1 0>;
                                vmmc-supply = <&reg_3p3v>;
@@ -84,6 +96,8 @@
                        };
                        usdhc@0219c000 { /* uSDHC4 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_usdhc4_2>;
                                cd-gpios = <&gpio2 6 0>;
                                wp-gpios = <&gpio2 7 0>;
                                vmmc-supply = <&reg_3p3v>;
@@ -99,7 +113,7 @@
                        uart2: serial@021e8000 {
                                status = "okay";
                                pinctrl-names = "default";
-                                pinctrl-0 = <&pinctrl_serial2_1>;
+                                pinctrl-0 = <&pinctrl_uart2_1>;
                        };
                        i2c@021a0000 { /* I2C1 */
@@ -111,6 +125,7 @@
                                codec: sgtl5000@0a {
                                        compatible = "fsl,sgtl5000";
                                        reg = <0x0a>;
+                                        clocks = <&clks 169>;
                                        VDDA-supply = <&reg_2p5v>;
                                        VDDIO-supply = <&reg_3p3v>;
                                };
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 07509a181178..e596c28c214d 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -22,28 +22,51 @@
        };
        soc {
                aips-bus@02000000 { /* AIPS1 */
                        spba-bus@02000000 {
                                uart1: serial@02020000 {
+                                        pinctrl-names = "default";
+                                        pinctrl-0 = <&pinctrl_uart1_1>;
                                        status = "okay";
                                };
                        };
+                        iomuxc@020e0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_hog>;
+                                hog {
+                                        pinctrl_hog: hoggrp {
+                                                fsl,pins = <
+                                                        1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
+                                                        1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
+                                                        1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
+                                                        1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
+                                                >;
+                                        };
+                                };
+                        };
                };
                aips-bus@02100000 { /* AIPS2 */
                        ethernet@02188000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_enet_1>;
                                phy-mode = "rgmii";
                                status = "okay";
                        };
                        usdhc@02194000 { /* uSDHC2 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_usdhc2_1>;
                                cd-gpios = <&gpio2 2 0>;
                                wp-gpios = <&gpio2 3 0>;
                                status = "okay";
                        };
                        usdhc@02198000 { /* uSDHC3 */
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_usdhc3_1>;
                                cd-gpios = <&gpio2 0 0>;
                                wp-gpios = <&gpio2 1 0>;
                                status = "okay";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index fd57079f71a9..35e5895ba3df 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -97,18 +97,23 @@
                dma-apbh@00110000 {
                        compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
                        reg = <0x00110000 0x2000>;
+                        clocks = <&clks 106>;
                };
                gpmi-nand@00112000 {
-                       compatible = "fsl,imx6q-gpmi-nand";
+                        compatible = "fsl,imx6q-gpmi-nand";
-                       #address-cells = <1>;
+                        #address-cells = <1>;
-                       #size-cells = <1>;
+                        #size-cells = <1>;
-                       reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+                        reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-                       reg-names = "gpmi-nand", "bch";
+                        reg-names = "gpmi-nand", "bch";
-                       interrupts = <0 13 0x04>, <0 15 0x04>;
+                        interrupts = <0 13 0x04>, <0 15 0x04>;
-                       interrupt-names = "gpmi-dma", "bch";
+                        interrupt-names = "gpmi-dma", "bch";
-                       fsl,gpmi-dma-channel = <0>;
+                        clocks = <&clks 152>, <&clks 153>, <&clks 151>,
-                       status = "disabled";
+                                 <&clks 150>, <&clks 149>;
+                        clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+                                      "gpmi_bch_apb", "per1_bch";
+                        fsl,gpmi-dma-channel = <0>;
+                        status = "disabled";
                };
                timer@00a00600 {
@@ -150,6 +155,8 @@
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02008000 0x4000>;
                                        interrupts = <0 31 0x04>;
+                                        clocks = <&clks 112>, <&clks 112>;
+                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
@@ -159,6 +166,8 @@
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x0200c000 0x4000>;
                                        interrupts = <0 32 0x04>;
+                                        clocks = <&clks 113>, <&clks 113>;
+                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
@@ -168,6 +177,8 @@
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02010000 0x4000>;
                                        interrupts = <0 33 0x04>;
+                                        clocks = <&clks 114>, <&clks 114>;
+                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
@@ -177,6 +188,8 @@
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02014000 0x4000>;
                                        interrupts = <0 34 0x04>;
+                                        clocks = <&clks 115>, <&clks 115>;
+                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
@@ -186,6 +199,8 @@
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02018000 0x4000>;
                                        interrupts = <0 35 0x04>;
+                                        clocks = <&clks 116>, <&clks 116>;
+                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
@@ -193,6 +208,8 @@
                                        compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                        reg = <0x02020000 0x4000>;
                                        interrupts = <0 26 0x04>;
+                                        clocks = <&clks 160>, <&clks 161>;
+                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
@@ -205,6 +222,7 @@
                                        compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
                                        reg = <0x02028000 0x4000>;
                                        interrupts = <0 46 0x04>;
+                                        clocks = <&clks 178>;
                                        fsl,fifo-depth = <15>;
                                        fsl,ssi-dma-events = <38 37>;
                                        status = "disabled";
@@ -214,6 +232,7 @@
                                        compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
                                        reg = <0x0202c000 0x4000>;
                                        interrupts = <0 47 0x04>;
+                                        clocks = <&clks 179>;
                                        fsl,fifo-depth = <15>;
                                        fsl,ssi-dma-events = <42 41>;
                                        status = "disabled";
@@ -223,6 +242,7 @@
                                        compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
                                        reg = <0x02030000 0x4000>;
                                        interrupts = <0 48 0x04>;
+                                        clocks = <&clks 180>;
                                        fsl,fifo-depth = <15>;
                                        fsl,ssi-dma-events = <46 45>;
                                        status = "disabled";
@@ -362,20 +382,22 @@
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020bc000 0x4000>;
                                interrupts = <0 80 0x04>;
-                                status = "disabled";
+                                clocks = <&clks 0>;
                        };
                        wdog@020c0000 { /* WDOG2 */
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020c0000 0x4000>;
                                interrupts = <0 81 0x04>;
+                                clocks = <&clks 0>;
                                status = "disabled";
                        };
-                        ccm@020c4000 {
+                        clks: ccm@020c4000 {
                                compatible = "fsl,imx6q-ccm";
                                reg = <0x020c4000 0x4000>;
                                interrupts = <0 87 0x04 0 88 0x04>;
+                                #clock-cells = <1>;
                        };
                        anatop@020c8000 {
@@ -472,12 +494,14 @@
                                compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
                                reg = <0x020c9000 0x1000>;
                                interrupts = <0 44 0x04>;
+                                clocks = <&clks 182>;
                        };
                        usbphy2: usbphy@020ca000 {
                                compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
                                reg = <0x020ca000 0x1000>;
                                interrupts = <0 45 0x04>;
+                                clocks = <&clks 183>;
                        };
                        snvs@020cc000 {
@@ -514,86 +538,207 @@
                                /* shared pinctrl settings */
                                audmux {
                                        pinctrl_audmux_1: audmux-1 {
-                                                fsl,pins = <18   0x80000000     /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+                                                fsl,pins = <
-                                                            1586 0x80000000     /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+                                                        18   0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
-                                                            11   0x80000000     /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+                                                        1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
-                                                            3    0x80000000>;   /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+                                                        11   0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+                                                        3    0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+                                                >;
+                                        };
+                                };
+                                ecspi1 {
+                                        pinctrl_ecspi1_1: ecspi1grp-1 {
+                                                fsl,pins = <
+                                                        101 0x100b1     /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+                                                        109 0x100b1     /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+                                                        94  0x100b1     /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+                                                >;
+                                        };
+                                };
+                                enet {
+                                        pinctrl_enet_1: enetgrp-1 {
+                                                fsl,pins = <
+                                                        695 0x1b0b0     /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */
+                                                        756 0x1b0b0     /* MX6Q_PAD_ENET_MDC__ENET_MDC */
+                                                        24  0x1b0b0     /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+                                                        30  0x1b0b0     /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+                                                        34  0x1b0b0     /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+                                                        39  0x1b0b0     /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+                                                        44  0x1b0b0     /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+                                                        56  0x1b0b0     /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+                                                        702 0x1b0b0     /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+                                                        74  0x1b0b0     /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+                                                        52  0x1b0b0     /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+                                                        61  0x1b0b0     /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+                                                        66  0x1b0b0     /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+                                                        70  0x1b0b0     /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+                                                        48  0x1b0b0     /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+                                                >;
+                                        };
+                                        pinctrl_enet_2: enetgrp-2 {
+                                                fsl,pins = <
+                                                        890 0x1b0b0     /* MX6Q_PAD_KEY_COL1__ENET_MDIO */
+                                                        909 0x1b0b0     /* MX6Q_PAD_KEY_COL2__ENET_MDC */
+                                                        24  0x1b0b0     /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */
+                                                        30  0x1b0b0     /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */
+                                                        34  0x1b0b0     /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */
+                                                        39  0x1b0b0     /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */
+                                                        44  0x1b0b0     /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */
+                                                        56  0x1b0b0     /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */
+                                                        702 0x1b0b0     /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */
+                                                        74  0x1b0b0     /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */
+                                                        52  0x1b0b0     /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */
+                                                        61  0x1b0b0     /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */
+                                                        66  0x1b0b0     /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
+                                                        70  0x1b0b0     /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
+                                                        48  0x1b0b0     /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+                                                >;
                                        };
                                };
                                gpmi-nand {
                                        pinctrl_gpmi_nand_1: gpmi-nand-1 {
-                                                fsl,pins = <1328 0xb0b1         /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
+                                                fsl,pins = <
-                                                            1336 0xb0b1         /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
+                                                        1328 0xb0b1     /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */
-                                                            1344 0xb0b1         /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
+                                                        1336 0xb0b1     /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */
-                                                            1352 0xb000         /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
+                                                        1344 0xb0b1     /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */
-                                                            1360 0xb0b1         /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
+                                                        1352 0xb000     /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */
-                                                            1365 0xb0b1         /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
+                                                        1360 0xb0b1     /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */
-                                                            1371 0xb0b1         /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
+                                                        1365 0xb0b1     /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */
-                                                            1378 0xb0b1         /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
+                                                        1371 0xb0b1     /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */
-                                                            1387 0xb0b1         /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
+                                                        1378 0xb0b1     /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */
-                                                            1393 0xb0b1         /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
+                                                        1387 0xb0b1     /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */
-                                                            1397 0xb0b1         /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
+                                                        1393 0xb0b1     /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */
-                                                            1405 0xb0b1         /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
+                                                        1397 0xb0b1     /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */
-                                                            1413 0xb0b1         /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
+                                                        1405 0xb0b1     /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */
-                                                            1421 0xb0b1         /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
+                                                        1413 0xb0b1     /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */
-                                                            1429 0xb0b1         /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
+                                                        1421 0xb0b1     /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */
-                                                            1437 0xb0b1         /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
+                                                        1429 0xb0b1     /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */
-                                                            1445 0xb0b1         /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
+                                                        1437 0xb0b1     /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */
-                                                            1453 0xb0b1         /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+                                                        1445 0xb0b1     /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */
-                                                            1463 0x00b1>;       /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+                                                        1453 0xb0b1     /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */
+                                                        1463 0x00b1     /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */
+                                                >;
                                        };
                                };
                                i2c1 {
                                        pinctrl_i2c1_1: i2c1grp-1 {
-                                                fsl,pins = <137 0x4001b8b1      /* MX6Q_PAD_EIM_D21__I2C1_SCL */
+                                                fsl,pins = <
-                                                            196 0x4001b8b1>;    /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+                                                        137 0x4001b8b1  /* MX6Q_PAD_EIM_D21__I2C1_SCL */
+                                                        196 0x4001b8b1  /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+                                                >;
+                                        };
+                                };
+                                uart1 {
+                                        pinctrl_uart1_1: uart1grp-1 {
+                                                fsl,pins = <
+                                                        1140 0x1b0b1    /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */
+                                                        1148 0x1b0b1    /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */
+                                                >;
                                        };
                                };
-                                serial2 {
+                                uart2 {
-                                        pinctrl_serial2_1: serial2grp-1 {
+                                        pinctrl_uart2_1: uart2grp-1 {
-                                                fsl,pins = <183 0x1b0b1         /* MX6Q_PAD_EIM_D26__UART2_TXD */
+                                                fsl,pins = <
-                                                            191 0x1b0b1>;       /* MX6Q_PAD_EIM_D27__UART2_RXD */
+                                                        183 0x1b0b1     /* MX6Q_PAD_EIM_D26__UART2_TXD */
+                                                        191 0x1b0b1     /* MX6Q_PAD_EIM_D27__UART2_RXD */
+                                                >;
+                                        };
+                                };
+                                uart4 {
+                                        pinctrl_uart4_1: uart4grp-1 {
+                                                fsl,pins = <
+                                                        877 0x1b0b1     /* MX6Q_PAD_KEY_COL0__UART4_TXD */
+                                                        885 0x1b0b1     /* MX6Q_PAD_KEY_ROW0__UART4_RXD */
+                                                >;
+                                        };
+                                };
+                                usbotg {
+                                        pinctrl_usbotg_1: usbotggrp-1 {
+                                                fsl,pins = <
+                                                        1592 0x17059    /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
+                                                >;
+                                        };
+                                };
+                                usdhc2 {
+                                        pinctrl_usdhc2_1: usdhc2grp-1 {
+                                                fsl,pins = <
+                                                        1577 0x17059    /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */
+                                                        1569 0x10059    /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */
+                                                        16   0x17059    /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */
+                                                        0    0x17059    /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */
+                                                        8    0x17059    /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */
+                                                        1583 0x17059    /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */
+                                                        1430 0x17059    /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */
+                                                        1438 0x17059    /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */
+                                                        1446 0x17059    /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */
+                                                        1454 0x17059    /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */
+                                                >;
                                        };
                                };
                                usdhc3 {
                                        pinctrl_usdhc3_1: usdhc3grp-1 {
-                                                fsl,pins = <1273 0x17059        /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+                                                fsl,pins = <
-                                                            1281 0x10059        /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+                                                        1273 0x17059    /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
-                                                            1289 0x17059        /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+                                                        1281 0x10059    /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
-                                                            1297 0x17059        /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+                                                        1289 0x17059    /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
-                                                            1305 0x17059        /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+                                                        1297 0x17059    /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
-                                                            1312 0x17059        /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+                                                        1305 0x17059    /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
-                                                            1265 0x17059        /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+                                                        1312 0x17059    /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
-                                                            1257 0x17059        /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+                                                        1265 0x17059    /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
-                                                            1249 0x17059        /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+                                                        1257 0x17059    /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
-                                                            1241 0x17059>;      /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+                                                        1249 0x17059    /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+                                                        1241 0x17059    /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+                                                >;
+                                        };
+                                        pinctrl_usdhc3_2: usdhc3grp-2 {
+                                                fsl,pins = <
+                                                        1273 0x17059    /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+                                                        1281 0x10059    /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+                                                        1289 0x17059    /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+                                                        1297 0x17059    /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+                                                        1305 0x17059    /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+                                                        1312 0x17059    /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+                                                >;
                                        };
                                };
                                usdhc4 {
                                        pinctrl_usdhc4_1: usdhc4grp-1 {
-                                                fsl,pins = <1386 0x17059        /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+                                                fsl,pins = <
-                                                            1392 0x10059        /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+                                                        1386 0x17059    /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
-                                                            1462 0x17059        /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+                                                        1392 0x10059    /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
-                                                            1470 0x17059        /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+                                                        1462 0x17059    /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
-                                                            1478 0x17059        /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+                                                        1470 0x17059    /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
-                                                            1486 0x17059        /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+                                                        1478 0x17059    /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
-                                                            1493 0x17059        /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+                                                        1486 0x17059    /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
-                                                            1501 0x17059        /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+                                                        1493 0x17059    /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
-                                                            1509 0x17059        /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+                                                        1501 0x17059    /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
-                                                            1517 0x17059>;      /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+                                                        1509 0x17059    /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+                                                        1517 0x17059    /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+                                                >;
                                        };
-                                };
-                                ecspi1 {
+                                        pinctrl_usdhc4_2: usdhc4grp-2 {
-                                        pinctrl_ecspi1_1: ecspi1grp-1 {
+                                                fsl,pins = <
-                                                fsl,pins = <101 0x100b1         /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */
+                                                        1386 0x17059    /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
-                                                            109 0x100b1         /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */
+                                                        1392 0x10059    /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
-                                                            94  0x100b1>;       /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */
+                                                        1462 0x17059    /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+                                                        1470 0x17059    /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+                                                        1478 0x17059    /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+                                                        1486 0x17059    /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+                                                >;
                                        };
                                };
                        };
@@ -612,6 +757,9 @@
                                compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
                                reg = <0x020ec000 0x4000>;
                                interrupts = <0 2 0x04>;
+                                clocks = <&clks 155>, <&clks 155>;
+                                clock-names = "ipg", "ahb";
+                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
                        };
                };
@@ -635,7 +783,9 @@
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184000 0x200>;
                                interrupts = <0 43 0x04>;
+                                clocks = <&clks 162>;
                                fsl,usbphy = <&usbphy1>;
+                                fsl,usbmisc = <&usbmisc 0>;
                                status = "disabled";
                        };
@@ -643,7 +793,9 @@
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184200 0x200>;
                                interrupts = <0 40 0x04>;
+                                clocks = <&clks 162>;
                                fsl,usbphy = <&usbphy2>;
+                                fsl,usbmisc = <&usbmisc 1>;
                                status = "disabled";
                        };
@@ -651,6 +803,8 @@
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184400 0x200>;
                                interrupts = <0 41 0x04>;
+                                clocks = <&clks 162>;
+                                fsl,usbmisc = <&usbmisc 2>;
                                status = "disabled";
                        };
@@ -658,13 +812,24 @@
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184600 0x200>;
                                interrupts = <0 42 0x04>;
+                                clocks = <&clks 162>;
+                                fsl,usbmisc = <&usbmisc 3>;
                                status = "disabled";
                        };
+                        usbmisc: usbmisc@02184800 {
+                                #index-cells = <1>;
+                                compatible = "fsl,imx6q-usbmisc";
+                                reg = <0x02184800 0x200>;
+                                clocks = <&clks 162>;
+                        };
                        ethernet@02188000 {
                                compatible = "fsl,imx6q-fec";
                                reg = <0x02188000 0x4000>;
                                interrupts = <0 118 0x04 0 119 0x04>;
+                                clocks = <&clks 117>, <&clks 117>;
+                                clock-names = "ipg", "ahb";
                                status = "disabled";
                        };
@@ -677,6 +842,8 @@
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02190000 0x4000>;
                                interrupts = <0 22 0x04>;
+                                clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+                                clock-names = "ipg", "ahb", "per";
                                status = "disabled";
                        };
@@ -684,6 +851,8 @@
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02194000 0x4000>;
                                interrupts = <0 23 0x04>;
+                                clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+                                clock-names = "ipg", "ahb", "per";
                                status = "disabled";
                        };
@@ -691,6 +860,8 @@
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02198000 0x4000>;
                                interrupts = <0 24 0x04>;
+                                clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+                                clock-names = "ipg", "ahb", "per";
                                status = "disabled";
                        };
@@ -698,6 +869,8 @@
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x0219c000 0x4000>;
                                interrupts = <0 25 0x04>;
+                                clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+                                clock-names = "ipg", "ahb", "per";
                                status = "disabled";
                        };
@@ -707,6 +880,7 @@
                                compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
                                reg = <0x021a0000 0x4000>;
                                interrupts = <0 36 0x04>;
+                                clocks = <&clks 125>;
                                status = "disabled";
                        };
@@ -716,6 +890,7 @@
                                compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
                                reg = <0x021a4000 0x4000>;
                                interrupts = <0 37 0x04>;
+                                clocks = <&clks 126>;
                                status = "disabled";
                        };
@@ -725,6 +900,7 @@
                                compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
                                reg = <0x021a8000 0x4000>;
                                interrupts = <0 38 0x04>;
+                                clocks = <&clks 127>;
                                status = "disabled";
                        };
@@ -788,6 +964,8 @@
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021e8000 0x4000>;
                                interrupts = <0 27 0x04>;
+                                clocks = <&clks 160>, <&clks 161>;
+                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
@@ -795,6 +973,8 @@
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021ec000 0x4000>;
                                interrupts = <0 28 0x04>;
+                                clocks = <&clks 160>, <&clks 161>;
+                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
@@ -802,6 +982,8 @@
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021f0000 0x4000>;
                                interrupts = <0 29 0x04>;
+                                clocks = <&clks 160>, <&clks 161>;
+                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
@@ -809,6 +991,8 @@
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021f4000 0x4000>;
                                interrupts = <0 30 0x04>;
+                                clocks = <&clks 160>, <&clks 161>;
+                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
                };
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 80f74e256408..0514fb41627e 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -26,6 +26,11 @@
                interrupt-parent = <&intc>;
                ranges;
+                L2: l2-cache {
+                        compatible = "marvell,tauros2-cache";
+                        marvell,tauros2-cache-features = <0x3>;
+                };
                axi@d4200000 {  /* AXI */
                        compatible = "mrvl,axi-bus", "simple-bus";
                        #address-cells = <1>;
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 45bc4bb04e57..31f2157cd7d7 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -7,7 +7,7 @@
        compatible = "qcom,msm8660-surf", "qcom,msm8660";
        interrupt-parent = <&intc>;
-        intc: interrupt-controller@02080000 {
+        intc: interrupt-controller@2080000 {
                compatible = "qcom,msm-8660-qgic";
                interrupt-controller;
                #interrupt-cells = <3>;
@@ -15,6 +15,23 @@
                      < 0x02081000 0x1000 >;
        };
+        timer@2000004 {
+                compatible = "qcom,msm-gpt", "qcom,msm-timer";
+                interrupts = <1 1 0x301>;
+                reg = <0x02000004 0x10>;
+                clock-frequency = <32768>;
+                cpu-offset = <0x40000>;
+        };
+        timer@2000024 {
+                compatible = "qcom,msm-dgt", "qcom,msm-timer";
+                interrupts = <1 0 0x301>;
+                reg = <0x02000024 0x10>,
+                      <0x02000034 0x4>;
+                clock-frequency = <6750000>;
+                cpu-offset = <0x40000>;
+        };
        serial@19c400000 {
                compatible = "qcom,msm-hsuart", "qcom,msm-uart";
                reg = <0x19c40000 0x1000>,
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
new file mode 100644
index 000000000000..9e621b5ad3dd
--- /dev/null
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -0,0 +1,41 @@
+/dts-v1/;
+/include/ "skeleton.dtsi"
+/ {
+        model = "Qualcomm MSM8960 CDP";
+        compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+        interrupt-parent = <&intc>;
+        intc: interrupt-controller@2000000 {
+                compatible = "qcom,msm-qgic2";
+                interrupt-controller;
+                #interrupt-cells = <3>;
+                reg = < 0x02000000 0x1000 >,
+                      < 0x02002000 0x1000 >;
+        };
+        timer@200a004 {
+                compatible = "qcom,msm-gpt", "qcom,msm-timer";
+                interrupts = <1 2 0x301>;
+                reg = <0x0200a004 0x10>;
+                clock-frequency = <32768>;
+                cpu-offset = <0x80000>;
+        };
+        timer@200a024 {
+                compatible = "qcom,msm-dgt", "qcom,msm-timer";
+                interrupts = <1 1 0x301>;
+                reg = <0x0200a024 0x10>,
+                      <0x0200a034 0x4>;
+                clock-frequency = <6750000>;
+                cpu-offset = <0x80000>;
+        };
+        serial@19c400000 {
+                compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+                reg = <0x16440000 0x1000>,
+                      <0x16400000 0x1000>;
+                interrupts = <0 154 0x0>;
+        };
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 25b50b759dec..77b84e17c477 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -7,7 +7,7 @@
 */
 /dts-v1/;
-/include/ "omap2.dtsi"
+/include/ "omap2420.dtsi"
 / {
        model = "TI OMAP2420 H4 board";
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
new file mode 100644
index 000000000000..bfd76b4a0ddc
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -0,0 +1,48 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/include/ "omap2.dtsi"
+/ {
+        compatible = "ti,omap2420", "ti,omap2";
+        ocp {
+                omap2420_pmx: pinmux@48000030 {
+                        compatible = "ti,omap2420-padconf", "pinctrl-single";
+                        reg = <0x48000030 0x0113>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        pinctrl-single,register-width = <8>;
+                        pinctrl-single,function-mask = <0x3f>;
+                };
+                mcbsp1: mcbsp@48074000 {
+                        compatible = "ti,omap2420-mcbsp";
+                        reg = <0x48074000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <59>, /* TX interrupt */
+                                     <60>; /* RX interrupt */
+                        interrupt-names = "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,hwmods = "mcbsp1";
+                };
+                mcbsp2: mcbsp@48076000 {
+                        compatible = "ti,omap2420-mcbsp";
+                        reg = <0x48076000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <62>, /* TX interrupt */
+                                     <63>; /* RX interrupt */
+                        interrupt-names = "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,hwmods = "mcbsp2";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
new file mode 100644
index 000000000000..4565d9750f4d
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/include/ "omap2.dtsi"
+/ {
+        compatible = "ti,omap2430", "ti,omap2";
+        ocp {
+                omap2430_pmx: pinmux@49002030 {
+                        compatible = "ti,omap2430-padconf", "pinctrl-single";
+                        reg = <0x49002030 0x0154>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        pinctrl-single,register-width = <8>;
+                        pinctrl-single,function-mask = <0x3f>;
+                };
+                mcbsp1: mcbsp@48074000 {
+                        compatible = "ti,omap2430-mcbsp";
+                        reg = <0x48074000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <64>, /* OCP compliant interrupt */
+                                     <59>, /* TX interrupt */
+                                     <60>, /* RX interrupt */
+                                     <61>; /* RX overflow interrupt */
+                        interrupt-names = "common", "tx", "rx", "rx_overflow";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp1";
+                };
+                mcbsp2: mcbsp@48076000 {
+                        compatible = "ti,omap2430-mcbsp";
+                        reg = <0x48076000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <16>, /* OCP compliant interrupt */
+                                     <62>, /* TX interrupt */
+                                     <63>; /* RX interrupt */
+                        interrupt-names = "common", "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp2";
+                };
+                mcbsp3: mcbsp@4808c000 {
+                        compatible = "ti,omap2430-mcbsp";
+                        reg = <0x4808c000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <17>, /* OCP compliant interrupt */
+                                     <89>, /* TX interrupt */
+                                     <90>; /* RX interrupt */
+                        interrupt-names = "common", "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp3";
+                };
+                mcbsp4: mcbsp@4808e000 {
+                        compatible = "ti,omap2430-mcbsp";
+                        reg = <0x4808e000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <18>, /* OCP compliant interrupt */
+                                     <54>, /* TX interrupt */
+                                     <55>; /* RX interrupt */
+                        interrupt-names = "common", "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp4";
+                };
+                mcbsp5: mcbsp@48096000 {
+                        compatible = "ti,omap2430-mcbsp";
+                        reg = <0x48096000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <19>, /* OCP compliant interrupt */
+                                     <81>, /* TX interrupt */
+                                     <82>; /* RX interrupt */
+                        interrupt-names = "common", "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp5";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index cdcb98c7e075..c38cf76df81f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -7,16 +7,44 @@
 */
 /dts-v1/;
-/include/ "omap3.dtsi"
+/include/ "omap36xx.dtsi"
 / {
-        model = "TI OMAP3 BeagleBoard";
+        model = "TI OMAP3 BeagleBoard xM";
-        compatible = "ti,omap3-beagle", "ti,omap3";
+        compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
        memory {
                device_type = "memory";
                reg = <0x80000000 0x20000000>; /* 512 MB */
        };
+        leds {
+                compatible = "gpio-leds";
+                pmu_stat {
+                        label = "beagleboard::pmu_stat";
+                        gpios = <&twl_gpio 19 0>; /* LEDB */
+                };
+                heartbeat {
+                        label = "beagleboard::usr0";
+                        gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+                        linux,default-trigger = "heartbeat";
+                };
+                mmc {
+                        label = "beagleboard::usr1";
+                        gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+                        linux,default-trigger = "mmc0";
+                };
+        };
+        sound {
+                compatible = "ti,omap-twl4030";
+                ti,model = "omap3beagle";
+                ti,mcbsp = <&mcbsp2>;
+                ti,codec = <&twl_audio>;
+        };
 };
 &i2c1 {
@@ -27,11 +55,17 @@
                interrupts = <7>; /* SYS_NIRQ cascaded to intc */
                interrupt-parent = <&intc>;
-                vsim: regulator@10 {
+                vsim: regulator-vsim {
                        compatible = "ti,twl4030-vsim";
                        regulator-min-microvolt = <1800000>;
                        regulator-max-microvolt = <3000000>;
                };
+                twl_audio: audio {
+                        compatible = "ti,twl4030-audio";
+                        codec {
+                        };
+                };
        };
 };
@@ -67,3 +101,15 @@
 &mmc3 {
        status = "disabled";
 };
+&twl_gpio {
+        ti,use-leds;
+        /* pullups: BIT(1) */
+        ti,pullups = <0x000002>;
+        /*
+         * pulldowns:
+         * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+         * BIT(15), BIT(16), BIT(17)
+         */
+        ti,pulldowns = <0x03a1c4>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index f349ee9182ce..e8ba1c247a39 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -17,6 +17,15 @@
                device_type = "memory";
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
+        leds {
+                compatible = "gpio-leds";
+                ledb {
+                        label = "omap3evm::ledb";
+                        gpios = <&twl_gpio 19 0>; /* LEDB */
+                        linux,default-trigger = "default-on";
+                };
+        };
 };
 &i2c1 {
@@ -46,3 +55,7 @@
                reg = <0x5c>;
        };
 };
+&twl_gpio {
+        ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
new file mode 100644
index 000000000000..89808ce01673
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+/dts-v1/;
+/include/ "omap3.dtsi"
+/ {
+        leds {
+                compatible = "gpio-leds";
+                overo {
+                        label = "overo:blue:COM";
+                        gpios = <&twl_gpio 19 0>;
+                        linux,default-trigger = "mmc0";
+                };
+        };
+};
+&i2c1 {
+        clock-frequency = <2600000>;
+        twl: twl@48 {
+                reg = <0x48>;
+                interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+                interrupt-parent = <&intc>;
+        };
+};
+/include/ "twl4030.dtsi"
+/* i2c2 pins are used for gpio */
+&i2c2 {
+        status = "disabled";
+};
+/* on board microSD slot */
+&mmc1 {
+        vmmc-supply = <&vmmc1>;
+        bus-width = <4>;
+};
+/* optional on board WiFi */
+&mmc2 {
+        bus-width = <4>;
+};
+&twl_gpio {
+        ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
new file mode 100644
index 000000000000..a13d12de77ff
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+/include/ "omap3-overo.dtsi"
+/ {
+        model = "TI OMAP3 Gumstix Overo on Tobi";
+        compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
+        leds {
+                compatible = "gpio-leds";
+                heartbeat {
+                        label = "overo:red:gpio21";
+                        gpios = <&gpio1 21 0>;
+                        linux,default-trigger = "heartbeat";
+                };
+        };
+};
+&i2c3 {
+        clock-frequency = <100000>;
+};
+&mmc3 {
+        status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 810947198208..f38ea8771b44 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -17,7 +17,6 @@
                serial0 = &uart1;
                serial1 = &uart2;
                serial2 = &uart3;
-                serial3 = &uart4;
        };
        cpus {
@@ -69,6 +68,24 @@
                        reg = <0x48200000 0x1000>;
                };
+                omap3_pmx_core: pinmux@48002030 {
+                        compatible = "ti,omap3-padconf", "pinctrl-single";
+                        reg = <0x48002030 0x05cc>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        pinctrl-single,register-width = <16>;
+                        pinctrl-single,function-mask = <0x7fff>;
+                };
+                omap3_pmx_wkup: pinmux@0x48002a58 {
+                        compatible = "ti,omap3-padconf", "pinctrl-single";
+                        reg = <0x48002a58 0x5c>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        pinctrl-single,register-width = <16>;
+                        pinctrl-single,function-mask = <0x7fff>;
+                };
                gpio1: gpio@48310000 {
                        compatible = "ti,omap3-gpio";
                        ti,hwmods = "gpio1";
@@ -141,12 +158,6 @@
                        clock-frequency = <48000000>;
                };
-                uart4: serial@49042000 {
-                        compatible = "ti,omap3-uart";
-                        ti,hwmods = "uart4";
-                        clock-frequency = <48000000>;
-                };
                i2c1: i2c@48070000 {
                        compatible = "ti,omap3-i2c";
                        #address-cells = <1>;
@@ -220,5 +231,74 @@
                        compatible = "ti,omap3-wdt";
                        ti,hwmods = "wd_timer2";
                };
+                mcbsp1: mcbsp@48074000 {
+                        compatible = "ti,omap3-mcbsp";
+                        reg = <0x48074000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <16>, /* OCP compliant interrupt */
+                                     <59>, /* TX interrupt */
+                                     <60>; /* RX interrupt */
+                        interrupt-names = "common", "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp1";
+                };
+                mcbsp2: mcbsp@49022000 {
+                        compatible = "ti,omap3-mcbsp";
+                        reg = <0x49022000 0xff>,
+                              <0x49028000 0xff>;
+                        reg-names = "mpu", "sidetone";
+                        interrupts = <17>, /* OCP compliant interrupt */
+                                     <62>, /* TX interrupt */
+                                     <63>, /* RX interrupt */
+                                     <4>;  /* Sidetone */
+                        interrupt-names = "common", "tx", "rx", "sidetone";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <1280>;
+                        ti,hwmods = "mcbsp2";
+                };
+                mcbsp3: mcbsp@49024000 {
+                        compatible = "ti,omap3-mcbsp";
+                        reg = <0x49024000 0xff>,
+                              <0x4902a000 0xff>;
+                        reg-names = "mpu", "sidetone";
+                        interrupts = <22>, /* OCP compliant interrupt */
+                                     <89>, /* TX interrupt */
+                                     <90>, /* RX interrupt */
+                                     <5>;  /* Sidetone */
+                        interrupt-names = "common", "tx", "rx", "sidetone";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp3";
+                };
+                mcbsp4: mcbsp@49026000 {
+                        compatible = "ti,omap3-mcbsp";
+                        reg = <0x49026000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <23>, /* OCP compliant interrupt */
+                                     <54>, /* TX interrupt */
+                                     <55>; /* RX interrupt */
+                        interrupt-names = "common", "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp4";
+                };
+                mcbsp5: mcbsp@48096000 {
+                        compatible = "ti,omap3-mcbsp";
+                        reg = <0x48096000 0xff>;
+                        reg-names = "mpu";
+                        interrupts = <27>, /* OCP compliant interrupt */
+                                     <81>, /* TX interrupt */
+                                     <82>; /* RX interrupt */
+                        interrupt-names = "common", "tx", "rx";
+                        interrupt-parent = <&intc>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp5";
+                };
        };
 };
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
new file mode 100644
index 000000000000..96bf0287cb9f
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/include/ "omap3.dtsi"
+/ {
+        aliases {
+                serial3 = &uart4;
+        };
+        ocp {
+                uart4: serial@49042000 {
+                        compatible = "ti,omap3-uart";
+                        ti,hwmods = "uart4";
+                        clock-frequency = <48000000>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9880c12877b3..20b966ee1bb3 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 / {
        model = "TI OMAP4 PandaBoard";
@@ -126,3 +127,13 @@
        ti,non-removable;
        bus-width = <4>;
 };
+&emif1 {
+        cs1-used;
+        device-handle = <&elpida_ECB240ABACN>;
+};
+&emif2 {
+        cs1-used;
+        device-handle = <&elpida_ECB240ABACN>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 72216e932fc0..94a23b39033d 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 /include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
 / {
        model = "TI OMAP4 SDP board";
@@ -18,7 +19,7 @@
                reg = <0x80000000 0x40000000>; /* 1 GB */
        };
-        vdd_eth: fixedregulator@0 {
+        vdd_eth: fixedregulator-vdd-eth {
                compatible = "regulator-fixed";
                regulator-name = "VDD_ETH";
                regulator-min-microvolt = <3300000>;
@@ -28,7 +29,7 @@
                regulator-boot-on;
        };
-        vbat: fixedregulator@2 {
+        vbat: fixedregulator-vbat {
                compatible = "regulator-fixed";
                regulator-name = "VBAT";
                regulator-min-microvolt = <3750000>;
@@ -115,6 +116,33 @@
        };
 };
+&omap4_pmx_core {
+        uart2_pins: pinmux_uart2_pins {
+                pinctrl-single,pins = <
+                        0xd8 0x118      /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+                        0xda 0          /* uart2_rts.uart2_rts OUTPUT | MODE0 */
+                        0xdc 0x118      /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+                        0xde 0          /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+                >;
+        };
+        uart3_pins: pinmux_uart3_pins {
+                pinctrl-single,pins = <
+                        0x100 0x118     /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+                        0x102 0         /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+                        0x104 0x100     /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+                        0x106 0         /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+                >;
+        };
+        uart4_pins: pinmux_uart4_pins {
+                pinctrl-single,pins = <
+                        0x11c 0x100     /* uart4_rx.uart4_rx INPUT | MODE0 */
+                        0x11e 0         /* uart4_tx.uart4_tx OUTPUT | MODE0 */
+                >;
+        };
+};
 &i2c1 {
        clock-frequency = <400000>;
@@ -226,3 +254,98 @@
        bus-width = <4>;
        ti,non-removable;
 };
+&emif1 {
+        cs1-used;
+        device-handle = <&elpida_ECB240ABACN>;
+};
+&emif2 {
+        cs1-used;
+        device-handle = <&elpida_ECB240ABACN>;
+};
+&keypad {
+        keypad,num-rows = <8>;
+        keypad,num-columns = <8>;
+        linux,keymap = <0x00000012      /* KEY_E */
+                        0x00010013      /* KEY_R */
+                        0x00020014      /* KEY_T */
+                        0x00030066      /* KEY_HOME */
+                        0x0004003f      /* KEY_F5 */
+                        0x000500f0      /* KEY_UNKNOWN */
+                        0x00060017      /* KEY_I */
+                        0x0007002a      /* KEY_LEFTSHIFT */
+                        0x01000020      /* KEY_D*/
+                        0x01010021      /* KEY_F */
+                        0x01020022      /* KEY_G */
+                        0x010300e7      /* KEY_SEND */
+                        0x01040040      /* KEY_F6 */
+                        0x010500f0      /* KEY_UNKNOWN */
+                        0x01060025      /* KEY_K */
+                        0x0107001c      /* KEY_ENTER */
+                        0x0200002d      /* KEY_X */
+                        0x0201002e      /* KEY_C */
+                        0x0202002f      /* KEY_V */
+                        0x0203006b      /* KEY_END */
+                        0x02040041      /* KEY_F7 */
+                        0x020500f0      /* KEY_UNKNOWN */
+                        0x02060034      /* KEY_DOT */
+                        0x0207003a      /* KEY_CAPSLOCK */
+                        0x0300002c      /* KEY_Z */
+                        0x0301004e      /* KEY_KPLUS */
+                        0x03020030      /* KEY_B */
+                        0x0303003b      /* KEY_F1 */
+                        0x03040042      /* KEY_F8 */
+                        0x030500f0      /* KEY_UNKNOWN */
+                        0x03060018      /* KEY_O */
+                        0x03070039      /* KEY_SPACE */
+                        0x04000011      /* KEY_W */
+                        0x04010015      /* KEY_Y */
+                        0x04020016      /* KEY_U */
+                        0x0403003c      /* KEY_F2 */
+                        0x04040073      /* KEY_VOLUMEUP */
+                        0x040500f0      /* KEY_UNKNOWN */
+                        0x04060026      /* KEY_L */
+                        0x04070069      /* KEY_LEFT */
+                        0x0500001f      /* KEY_S */
+                        0x05010023      /* KEY_H */
+                        0x05020024      /* KEY_J */
+                        0x0503003d      /* KEY_F3 */
+                        0x05040043      /* KEY_F9 */
+                        0x05050072      /* KEY_VOLUMEDOWN */
+                        0x05060032      /* KEY_M */
+                        0x0507006a      /* KEY_RIGHT */
+                        0x06000010      /* KEY_Q */
+                        0x0601001e      /* KEY_A */
+                        0x06020031      /* KEY_N */
+                        0x0603009e      /* KEY_BACK */
+                        0x0604000e      /* KEY_BACKSPACE */
+                        0x060500f0      /* KEY_UNKNOWN */
+                        0x06060019      /* KEY_P */
+                        0x06070067      /* KEY_UP */
+                        0x07000094      /* KEY_PROG1 */
+                        0x07010095      /* KEY_PROG2 */
+                        0x070200ca      /* KEY_PROG3 */
+                        0x070300cb      /* KEY_PROG4 */
+                        0x0704003e      /* KEY_F4 */
+                        0x070500f0      /* KEY_UNKNOWN */
+                        0x07060160      /* KEY_OK */
+                        0x0707006c>;    /* KEY_DOWN */
+        linux,input-no-autorepeat;
+};
+&uart2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart2_pins>;
+};
+&uart3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart3_pins>;
+};
+&uart4 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart4_pins>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 04cbbcb6ff91..5d1c48459e6e 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -30,12 +30,35 @@
        cpus {
                cpu@0 {
                        compatible = "arm,cortex-a9";
+                        next-level-cache = <&L2>;
                };
                cpu@1 {
                        compatible = "arm,cortex-a9";
+                        next-level-cache = <&L2>;
                };
        };
+        gic: interrupt-controller@48241000 {
+                compatible = "arm,cortex-a9-gic";
+                interrupt-controller;
+                #interrupt-cells = <3>;
+                reg = <0x48241000 0x1000>,
+                      <0x48240100 0x0100>;
+        };
+        L2: l2-cache-controller@48242000 {
+                compatible = "arm,pl310-cache";
+                reg = <0x48242000 0x1000>;
+                cache-unified;
+                cache-level = <2>;
+        };
+        local-timer@0x48240600 {
+                compatible = "arm,cortex-a9-twd-timer";
+                reg = <0x48240600 0x20>;
+                interrupts = <1 13 0x304>;
+        };
        /*
         * The soc node represents the soc top level view. It is uses for IPs
         * that are not memory mapped in the MPU view or for the MPU itself.
@@ -61,30 +84,6 @@
        /*
         * XXX: Use a flat representation of the OMAP4 interconnect.
         * The real OMAP interconnect network is quite complex.
-         *
-         * MPU -+-- MPU_PRIVATE - GIC, L2
-         *      |
-         *      +----------------+----------+
-         *      |                |          |
-         *      +            +- EMIF - DDR  |
-         *      |            |              |
-         *      |            +     +--------+
-         *      |            |     |
-         *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
-         *      |            |
-         *      +- L3_MAIN --+- L4_CORE - IPs...
-         *                   |
-         *                   +- L4_PER - IPs...
-         *                   |
-         *                   +- L4_CFG -+- L4_WKUP - IPs...
-         *                   |          |
-         *                   |          +- IPs...
-         *                   +- IPU ----+
-         *                   |          |
-         *                   +- DSP ----+
-         *                   |          |
-         *                   +- DSS ----+
-         *
         * Since that will not bring real advantage to represent that in DT for
         * the moment, just use a fake OCP bus entry to represent the whole bus
         * hierarchy.
@@ -96,16 +95,27 @@
                ranges;
                ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-                gic: interrupt-controller@48241000 {
+                omap4_pmx_core: pinmux@4a100040 {
-                        compatible = "arm,cortex-a9-gic";
+                        compatible = "ti,omap4-padconf", "pinctrl-single";
-                        interrupt-controller;
+                        reg = <0x4a100040 0x0196>;
-                        #interrupt-cells = <3>;
+                        #address-cells = <1>;
-                        reg = <0x48241000 0x1000>,
+                        #size-cells = <0>;
-                              <0x48240100 0x0100>;
+                        pinctrl-single,register-width = <16>;
+                        pinctrl-single,function-mask = <0x7fff>;
+                };
+                omap4_pmx_wkup: pinmux@4a31e040 {
+                        compatible = "ti,omap4-padconf", "pinctrl-single";
+                        reg = <0x4a31e040 0x0038>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        pinctrl-single,register-width = <16>;
+                        pinctrl-single,function-mask = <0x7fff>;
                };
                gpio1: gpio@4a310000 {
                        compatible = "ti,omap4-gpio";
+                        reg = <0x4a310000 0x200>;
+                        interrupts = <0 29 0x4>;
                        ti,hwmods = "gpio1";
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -115,6 +125,8 @@
                gpio2: gpio@48055000 {
                        compatible = "ti,omap4-gpio";
+                        reg = <0x48055000 0x200>;
+                        interrupts = <0 30 0x4>;
                        ti,hwmods = "gpio2";
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -124,6 +136,8 @@
                gpio3: gpio@48057000 {
                        compatible = "ti,omap4-gpio";
+                        reg = <0x48057000 0x200>;
+                        interrupts = <0 31 0x4>;
                        ti,hwmods = "gpio3";
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -133,6 +147,8 @@
                gpio4: gpio@48059000 {
                        compatible = "ti,omap4-gpio";
+                        reg = <0x48059000 0x200>;
+                        interrupts = <0 32 0x4>;
                        ti,hwmods = "gpio4";
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -142,6 +158,8 @@
                gpio5: gpio@4805b000 {
                        compatible = "ti,omap4-gpio";
+                        reg = <0x4805b000 0x200>;
+                        interrupts = <0 33 0x4>;
                        ti,hwmods = "gpio5";
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -151,6 +169,8 @@
                gpio6: gpio@4805d000 {
                        compatible = "ti,omap4-gpio";
+                        reg = <0x4805d000 0x200>;
+                        interrupts = <0 34 0x4>;
                        ti,hwmods = "gpio6";
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -160,30 +180,40 @@
                uart1: serial@4806a000 {
                        compatible = "ti,omap4-uart";
+                        reg = <0x4806a000 0x100>;
+                        interrupts = <0 72 0x4>;
                        ti,hwmods = "uart1";
                        clock-frequency = <48000000>;
                };
                uart2: serial@4806c000 {
                        compatible = "ti,omap4-uart";
+                        reg = <0x4806c000 0x100>;
+                        interrupts = <0 73 0x4>;
                        ti,hwmods = "uart2";
                        clock-frequency = <48000000>;
                };
                uart3: serial@48020000 {
                        compatible = "ti,omap4-uart";
+                        reg = <0x48020000 0x100>;
+                        interrupts = <0 74 0x4>;
                        ti,hwmods = "uart3";
                        clock-frequency = <48000000>;
                };
                uart4: serial@4806e000 {
                        compatible = "ti,omap4-uart";
+                        reg = <0x4806e000 0x100>;
+                        interrupts = <0 70 0x4>;
                        ti,hwmods = "uart4";
                        clock-frequency = <48000000>;
                };
                i2c1: i2c@48070000 {
                        compatible = "ti,omap4-i2c";
+                        reg = <0x48070000 0x100>;
+                        interrupts = <0 56 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "i2c1";
@@ -191,6 +221,8 @@
                i2c2: i2c@48072000 {
                        compatible = "ti,omap4-i2c";
+                        reg = <0x48072000 0x100>;
+                        interrupts = <0 57 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "i2c2";
@@ -198,6 +230,8 @@
                i2c3: i2c@48060000 {
                        compatible = "ti,omap4-i2c";
+                        reg = <0x48060000 0x100>;
+                        interrupts = <0 61 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "i2c3";
@@ -205,6 +239,8 @@
                i2c4: i2c@48350000 {
                        compatible = "ti,omap4-i2c";
+                        reg = <0x48350000 0x100>;
+                        interrupts = <0 62 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "i2c4";
@@ -212,6 +248,8 @@
                mcspi1: spi@48098000 {
                        compatible = "ti,omap4-mcspi";
+                        reg = <0x48098000 0x200>;
+                        interrupts = <0 65 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "mcspi1";
@@ -220,6 +258,8 @@
                mcspi2: spi@4809a000 {
                        compatible = "ti,omap4-mcspi";
+                        reg = <0x4809a000 0x200>;
+                        interrupts = <0 66 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "mcspi2";
@@ -228,6 +268,8 @@
                mcspi3: spi@480b8000 {
                        compatible = "ti,omap4-mcspi";
+                        reg = <0x480b8000 0x200>;
+                        interrupts = <0 91 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "mcspi3";
@@ -236,6 +278,8 @@
                mcspi4: spi@480ba000 {
                        compatible = "ti,omap4-mcspi";
+                        reg = <0x480ba000 0x200>;
+                        interrupts = <0 48 0x4>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        ti,hwmods = "mcspi4";
@@ -244,6 +288,8 @@
                mmc1: mmc@4809c000 {
                        compatible = "ti,omap4-hsmmc";
+                        reg = <0x4809c000 0x400>;
+                        interrupts = <0 83 0x4>;
                        ti,hwmods = "mmc1";
                        ti,dual-volt;
                        ti,needs-special-reset;
@@ -251,30 +297,40 @@
                mmc2: mmc@480b4000 {
                        compatible = "ti,omap4-hsmmc";
+                        reg = <0x480b4000 0x400>;
+                        interrupts = <0 86 0x4>;
                        ti,hwmods = "mmc2";
                        ti,needs-special-reset;
                };
                mmc3: mmc@480ad000 {
                        compatible = "ti,omap4-hsmmc";
+                        reg = <0x480ad000 0x400>;
+                        interrupts = <0 94 0x4>;
                        ti,hwmods = "mmc3";
                        ti,needs-special-reset;
                };
                mmc4: mmc@480d1000 {
                        compatible = "ti,omap4-hsmmc";
+                        reg = <0x480d1000 0x400>;
+                        interrupts = <0 96 0x4>;
                        ti,hwmods = "mmc4";
                        ti,needs-special-reset;
                };
                mmc5: mmc@480d5000 {
                        compatible = "ti,omap4-hsmmc";
+                        reg = <0x480d5000 0x400>;
+                        interrupts = <0 59 0x4>;
                        ti,hwmods = "mmc5";
                        ti,needs-special-reset;
                };
                wdt2: wdt@4a314000 {
                        compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+                        reg = <0x4a314000 0x80>;
+                        interrupts = <0 80 0x4>;
                        ti,hwmods = "wd_timer2";
                };
@@ -282,6 +338,7 @@
                        compatible = "ti,omap4-mcpdm";
                        reg = <0x40132000 0x7f>, /* MPU private access */
                              <0x49032000 0x7f>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
                        interrupts = <0 112 0x4>;
                        interrupt-parent = <&gic>;
                        ti,hwmods = "mcpdm";
@@ -291,9 +348,87 @@
                        compatible = "ti,omap4-dmic";
                        reg = <0x4012e000 0x7f>, /* MPU private access */
                              <0x4902e000 0x7f>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
                        interrupts = <0 114 0x4>;
                        interrupt-parent = <&gic>;
                        ti,hwmods = "dmic";
                };
+                mcbsp1: mcbsp@40122000 {
+                        compatible = "ti,omap4-mcbsp";
+                        reg = <0x40122000 0xff>, /* MPU private access */
+                              <0x49022000 0xff>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 17 0x4>;
+                        interrupt-names = "common";
+                        interrupt-parent = <&gic>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp1";
+                };
+                mcbsp2: mcbsp@40124000 {
+                        compatible = "ti,omap4-mcbsp";
+                        reg = <0x40124000 0xff>, /* MPU private access */
+                              <0x49024000 0xff>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 22 0x4>;
+                        interrupt-names = "common";
+                        interrupt-parent = <&gic>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp2";
+                };
+                mcbsp3: mcbsp@40126000 {
+                        compatible = "ti,omap4-mcbsp";
+                        reg = <0x40126000 0xff>, /* MPU private access */
+                              <0x49026000 0xff>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 23 0x4>;
+                        interrupt-names = "common";
+                        interrupt-parent = <&gic>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp3";
+                };
+                mcbsp4: mcbsp@48096000 {
+                        compatible = "ti,omap4-mcbsp";
+                        reg = <0x48096000 0xff>; /* L4 Interconnect */
+                        reg-names = "mpu";
+                        interrupts = <0 16 0x4>;
+                        interrupt-names = "common";
+                        interrupt-parent = <&gic>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp4";
+                };
+                keypad: keypad@4a31c000 {
+                        compatible = "ti,omap4-keypad";
+                        reg = <0x4a31c000 0x80>;
+                        interrupts = <0 120 0x4>;
+                        reg-names = "mpu";
+                        ti,hwmods = "kbd";
+                };
+                emif1: emif@4c000000 {
+                        compatible = "ti,emif-4d";
+                        reg = <0x4c000000 0x100>;
+                        interrupts = <0 110 0x4>;
+                        ti,hwmods = "emif1";
+                        phy-type = <1>;
+                        hw-caps-read-idle-ctrl;
+                        hw-caps-ll-interface;
+                        hw-caps-temp-alert;
+                };
+                emif2: emif@4d000000 {
+                        compatible = "ti,emif-4d";
+                        reg = <0x4d000000 0x100>;
+                        interrupts = <0 111 0x4>;
+                        ti,hwmods = "emif2";
+                        phy-type = <1>;
+                        hw-caps-read-idle-ctrl;
+                        hw-caps-ll-interface;
+                        hw-caps-temp-alert;
+                };
        };
 };
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 200c39ad1c82..9c41a3f311aa 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -17,4 +17,68 @@
                device_type = "memory";
                reg = <0x80000000 0x40000000>; /* 1 GB */
        };
+        vmmcsd_fixed: fixedregulator-mmcsd {
+                compatible = "regulator-fixed";
+                regulator-name = "vmmcsd_fixed";
+                regulator-min-microvolt = <3000000>;
+                regulator-max-microvolt = <3000000>;
+        };
+};
+&mmc1 {
+        vmmc-supply = <&vmmcsd_fixed>;
+        bus-width = <4>;
+};
+&mmc2 {
+        vmmc-supply = <&vmmcsd_fixed>;
+        bus-width = <8>;
+        ti,non-removable;
+};
+&mmc3 {
+        bus-width = <4>;
+        ti,non-removable;
+};
+&mmc4 {
+        status = "disabled";
+};
+&mmc5 {
+        status = "disabled";
+};
+&i2c2 {
+        clock-frequency = <400000>;
+        /* Pressure Sensor */
+        bmp085@77 {
+                compatible = "bosch,bmp085";
+                reg = <0x77>;
+        };
+};
+&i2c4 {
+        clock-frequency = <400000>;
+        /* Temperature Sensor */
+        tmp102@48{
+                compatible = "ti,tmp102";
+                reg = <0x48>;
+        };
+};
+&keypad {
+        keypad,num-rows = <8>;
+        keypad,num-columns = <8>;
+        linux,keymap = <0x02020073      /* VOLUP */
+                        0x02030072      /* VOLDOWM */
+                        0x020400e7      /* SEND */
+                        0x02050066      /* HOME */
+                        0x0206006b      /* END */
+                        0x020700d9>;    /* SEARCH */
+        linux,input-no-autorepeat;
 };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 57e527083746..9ac75b37c992 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -145,6 +145,41 @@
                        #interrupt-cells = <1>;
                };
+                i2c1: i2c@48070000 {
+                        compatible = "ti,omap4-i2c";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        ti,hwmods = "i2c1";
+                };
+                i2c2: i2c@48072000 {
+                        compatible = "ti,omap4-i2c";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        ti,hwmods = "i2c2";
+                };
+                i2c3: i2c@48060000 {
+                        compatible = "ti,omap4-i2c";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        ti,hwmods = "i2c3";
+                };
+                i2c4: i2c@4807A000 {
+                        compatible = "ti,omap4-i2c";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        ti,hwmods = "i2c4";
+                };
+                i2c5: i2c@4807C000 {
+                        compatible = "ti,omap4-i2c";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        ti,hwmods = "i2c5";
+                };
                uart1: serial@4806a000 {
                        compatible = "ti,omap4-uart";
                        ti,hwmods = "uart1";
@@ -180,5 +215,97 @@
                        ti,hwmods = "uart6";
                        clock-frequency = <48000000>;
                };
+                mmc1: mmc@4809c000 {
+                        compatible = "ti,omap4-hsmmc";
+                        ti,hwmods = "mmc1";
+                        ti,dual-volt;
+                        ti,needs-special-reset;
+                };
+                mmc2: mmc@480b4000 {
+                        compatible = "ti,omap4-hsmmc";
+                        ti,hwmods = "mmc2";
+                        ti,needs-special-reset;
+                };
+                mmc3: mmc@480ad000 {
+                        compatible = "ti,omap4-hsmmc";
+                        ti,hwmods = "mmc3";
+                        ti,needs-special-reset;
+                };
+                mmc4: mmc@480d1000 {
+                        compatible = "ti,omap4-hsmmc";
+                        ti,hwmods = "mmc4";
+                        ti,needs-special-reset;
+                };
+                mmc5: mmc@480d5000 {
+                        compatible = "ti,omap4-hsmmc";
+                        ti,hwmods = "mmc5";
+                        ti,needs-special-reset;
+                };
+                keypad: keypad@4ae1c000 {
+                        compatible = "ti,omap4-keypad";
+                        ti,hwmods = "kbd";
+                };
+                mcpdm: mcpdm@40132000 {
+                        compatible = "ti,omap4-mcpdm";
+                        reg = <0x40132000 0x7f>, /* MPU private access */
+                              <0x49032000 0x7f>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 112 0x4>;
+                        interrupt-parent = <&gic>;
+                        ti,hwmods = "mcpdm";
+                };
+                dmic: dmic@4012e000 {
+                        compatible = "ti,omap4-dmic";
+                        reg = <0x4012e000 0x7f>, /* MPU private access */
+                              <0x4902e000 0x7f>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 114 0x4>;
+                        interrupt-parent = <&gic>;
+                        ti,hwmods = "dmic";
+                };
+                mcbsp1: mcbsp@40122000 {
+                        compatible = "ti,omap4-mcbsp";
+                        reg = <0x40122000 0xff>, /* MPU private access */
+                              <0x49022000 0xff>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 17 0x4>;
+                        interrupt-names = "common";
+                        interrupt-parent = <&gic>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp1";
+                };
+                mcbsp2: mcbsp@40124000 {
+                        compatible = "ti,omap4-mcbsp";
+                        reg = <0x40124000 0xff>, /* MPU private access */
+                              <0x49024000 0xff>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 22 0x4>;
+                        interrupt-names = "common";
+                        interrupt-parent = <&gic>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp2";
+                };
+                mcbsp3: mcbsp@40126000 {
+                        compatible = "ti,omap4-mcbsp";
+                        reg = <0x40126000 0xff>, /* MPU private access */
+                              <0x49026000 0xff>; /* L3 Interconnect */
+                        reg-names = "mpu", "dma";
+                        interrupts = <0 23 0x4>;
+                        interrupt-names = "common";
+                        interrupt-parent = <&gic>;
+                        ti,buffer-size = <128>;
+                        ti,hwmods = "mcbsp3";
+                };
        };
 };
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 802ec5b2fd00..a7ad85e4b8f9 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -135,13 +135,11 @@
                        ssp0: ssp@20084000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
-                                pl022,num-chipselects = <1>;
+                                num-cs = <1>;
                                cs-gpios = <&gpio 3 5 0>;
                                eeprom: at25@0 {
-                                        pl022,hierarchy = <0>;
                                        pl022,interface = <0>;
-                                        pl022,slave-tx-disable = <0>;
                                        pl022,com-mode = <0>;
                                        pl022,rx-level-trig = <1>;
                                        pl022,tx-level-trig = <1>;
diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts
deleted file mode 100644
index 34ae3a64ba25..000000000000
--- a/arch/arm/boot/dts/prima2-cb.dts
+++ /dev/null
@@ -1,424 +0,0 @@
-/dts-v1/;
-/ {
-        model = "SiRF Prima2 eVB";
-        compatible = "sirf,prima2-cb", "sirf,prima2";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        interrupt-parent = <&intc>;
-        memory {
-                reg = <0x00000000 0x20000000>;
-        };
-        chosen {
-                bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
-                linux,stdout-path = &uart1;
-        };
-        cpus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                cpu@0 {
-                        reg = <0x0>;
-                        d-cache-line-size = <32>;
-                        i-cache-line-size = <32>;
-                        d-cache-size = <32768>;
-                        i-cache-size = <32768>;
-                        /* from bootloader */
-                        timebase-frequency = <0>;
-                        bus-frequency = <0>;
-                        clock-frequency = <0>;
-                };
-        };
-        axi {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <1>;
-                ranges = <0x40000000 0x40000000 0x80000000>;
-                l2-cache-controller@80040000 {
-                        compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
-                        reg = <0x80040000 0x1000>;
-                        interrupts = <59>;
-                        arm,tag-latency = <1 1 1>;
-                        arm,data-latency = <1 1 1>;
-                        arm,filter-ranges = <0 0x40000000>;
-                };
-                intc: interrupt-controller@80020000 {
-                        #interrupt-cells = <1>;
-                        interrupt-controller;
-                        compatible = "sirf,prima2-intc";
-                        reg = <0x80020000 0x1000>;
-                };
-                sys-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0x88000000 0x88000000 0x40000>;
-                        clock-controller@88000000 {
-                                compatible = "sirf,prima2-clkc";
-                                reg = <0x88000000 0x1000>;
-                                interrupts = <3>;
-                        };
-                        reset-controller@88010000 {
-                                compatible = "sirf,prima2-rstc";
-                                reg = <0x88010000 0x1000>;
-                        };
-                        rsc-controller@88020000 {
-                                compatible = "sirf,prima2-rsc";
-                                reg = <0x88020000 0x1000>;
-                        };
-                };
-                mem-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0x90000000 0x90000000 0x10000>;
-                        memory-controller@90000000 {
-                                compatible = "sirf,prima2-memc";
-                                reg = <0x90000000 0x10000>;
-                                interrupts = <27>;
-                        };
-                };
-                disp-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0x90010000 0x90010000 0x30000>;
-                        display@90010000 {
-                                compatible = "sirf,prima2-lcd";
-                                reg = <0x90010000 0x20000>;
-                                interrupts = <30>;
-                        };
-                        vpp@90020000 {
-                                compatible = "sirf,prima2-vpp";
-                                reg = <0x90020000 0x10000>;
-                                interrupts = <31>;
-                        };
-                };
-                graphics-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0x98000000 0x98000000 0x8000000>;
-                        graphics@98000000 {
-                                compatible = "powervr,sgx531";
-                                reg = <0x98000000 0x8000000>;
-                                interrupts = <6>;
-                        };
-                };
-                multimedia-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0xa0000000 0xa0000000 0x8000000>;
-                        multimedia@a0000000 {
-                                compatible = "sirf,prima2-video-codec";
-                                reg = <0xa0000000 0x8000000>;
-                                interrupts = <5>;
-                        };
-                };
-                dsp-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0xa8000000 0xa8000000 0x2000000>;
-                        dspif@a8000000 {
-                                compatible = "sirf,prima2-dspif";
-                                reg = <0xa8000000 0x10000>;
-                                interrupts = <9>;
-                        };
-                        gps@a8010000 {
-                                compatible = "sirf,prima2-gps";
-                                reg = <0xa8010000 0x10000>;
-                                interrupts = <7>;
-                        };
-                        dsp@a9000000 {
-                                compatible = "sirf,prima2-dsp";
-                                reg = <0xa9000000 0x1000000>;
-                                interrupts = <8>;
-                        };
-                };
-                peri-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0xb0000000 0xb0000000 0x180000>;
-                        timer@b0020000 {
-                                compatible = "sirf,prima2-tick";
-                                reg = <0xb0020000 0x1000>;
-                                interrupts = <0>;
-                        };
-                        nand@b0030000 {
-                                compatible = "sirf,prima2-nand";
-                                reg = <0xb0030000 0x10000>;
-                                interrupts = <41>;
-                        };
-                        audio@b0040000 {
-                                compatible = "sirf,prima2-audio";
-                                reg = <0xb0040000 0x10000>;
-                                interrupts = <35>;
-                        };
-                        uart0: uart@b0050000 {
-                                cell-index = <0>;
-                                compatible = "sirf,prima2-uart";
-                                reg = <0xb0050000 0x10000>;
-                                interrupts = <17>;
-                        };
-                        uart1: uart@b0060000 {
-                                cell-index = <1>;
-                                compatible = "sirf,prima2-uart";
-                                reg = <0xb0060000 0x10000>;
-                                interrupts = <18>;
-                        };
-                        uart2: uart@b0070000 {
-                                cell-index = <2>;
-                                compatible = "sirf,prima2-uart";
-                                reg = <0xb0070000 0x10000>;
-                                interrupts = <19>;
-                        };
-                        usp0: usp@b0080000 {
-                                cell-index = <0>;
-                                compatible = "sirf,prima2-usp";
-                                reg = <0xb0080000 0x10000>;
-                                interrupts = <20>;
-                        };
-                        usp1: usp@b0090000 {
-                                cell-index = <1>;
-                                compatible = "sirf,prima2-usp";
-                                reg = <0xb0090000 0x10000>;
-                                interrupts = <21>;
-                        };
-                        usp2: usp@b00a0000 {
-                                cell-index = <2>;
-                                compatible = "sirf,prima2-usp";
-                                reg = <0xb00a0000 0x10000>;
-                                interrupts = <22>;
-                        };
-                        dmac0: dma-controller@b00b0000 {
-                                cell-index = <0>;
-                                compatible = "sirf,prima2-dmac";
-                                reg = <0xb00b0000 0x10000>;
-                                interrupts = <12>;
-                        };
-                        dmac1: dma-controller@b0160000 {
-                                cell-index = <1>;
-                                compatible = "sirf,prima2-dmac";
-                                reg = <0xb0160000 0x10000>;
-                                interrupts = <13>;
-                        };
-                        vip@b00C0000 {
-                                compatible = "sirf,prima2-vip";
-                                reg = <0xb00C0000 0x10000>;
-                        };
-                        spi0: spi@b00d0000 {
-                                cell-index = <0>;
-                                compatible = "sirf,prima2-spi";
-                                reg = <0xb00d0000 0x10000>;
-                                interrupts = <15>;
-                        };
-                        spi1: spi@b0170000 {
-                                cell-index = <1>;
-                                compatible = "sirf,prima2-spi";
-                                reg = <0xb0170000 0x10000>;
-                                interrupts = <16>;
-                        };
-                        i2c0: i2c@b00e0000 {
-                                cell-index = <0>;
-                                compatible = "sirf,prima2-i2c";
-                                reg = <0xb00e0000 0x10000>;
-                                interrupts = <24>;
-                        };
-                        i2c1: i2c@b00f0000 {
-                                cell-index = <1>;
-                                compatible = "sirf,prima2-i2c";
-                                reg = <0xb00f0000 0x10000>;
-                                interrupts = <25>;
-                        };
-                        tsc@b0110000 {
-                                compatible = "sirf,prima2-tsc";
-                                reg = <0xb0110000 0x10000>;
-                                interrupts = <33>;
-                        };
-                        gpio: gpio-controller@b0120000 {
-                                #gpio-cells = <2>;
-                                #interrupt-cells = <2>;
-                                compatible = "sirf,prima2-gpio-pinmux";
-                                reg = <0xb0120000 0x10000>;
-                                gpio-controller;
-                                interrupt-controller;
-                        };
-                        pwm@b0130000 {
-                                compatible = "sirf,prima2-pwm";
-                                reg = <0xb0130000 0x10000>;
-                        };
-                        efusesys@b0140000 {
-                                compatible = "sirf,prima2-efuse";
-                                reg = <0xb0140000 0x10000>;
-                        };
-                        pulsec@b0150000 {
-                                compatible = "sirf,prima2-pulsec";
-                                reg = <0xb0150000 0x10000>;
-                                interrupts = <48>;
-                        };
-                        pci-iobg {
-                                compatible = "sirf,prima2-pciiobg", "simple-bus";
-                                #address-cells = <1>;
-                                #size-cells = <1>;
-                                ranges = <0x56000000 0x56000000 0x1b00000>;
-                                sd0: sdhci@56000000 {
-                                        cell-index = <0>;
-                                        compatible = "sirf,prima2-sdhc";
-                                        reg = <0x56000000 0x100000>;
-                                        interrupts = <38>;
-                                };
-                                sd1: sdhci@56100000 {
-                                        cell-index = <1>;
-                                        compatible = "sirf,prima2-sdhc";
-                                        reg = <0x56100000 0x100000>;
-                                        interrupts = <38>;
-                                };
-                                sd2: sdhci@56200000 {
-                                        cell-index = <2>;
-                                        compatible = "sirf,prima2-sdhc";
-                                        reg = <0x56200000 0x100000>;
-                                        interrupts = <23>;
-                                };
-                                sd3: sdhci@56300000 {
-                                        cell-index = <3>;
-                                        compatible = "sirf,prima2-sdhc";
-                                        reg = <0x56300000 0x100000>;
-                                        interrupts = <23>;
-                                };
-                                sd4: sdhci@56400000 {
-                                        cell-index = <4>;
-                                        compatible = "sirf,prima2-sdhc";
-                                        reg = <0x56400000 0x100000>;
-                                        interrupts = <39>;
-                                };
-                                sd5: sdhci@56500000 {
-                                        cell-index = <5>;
-                                        compatible = "sirf,prima2-sdhc";
-                                        reg = <0x56500000 0x100000>;
-                                        interrupts = <39>;
-                                };
-                                pci-copy@57900000 {
-                                        compatible = "sirf,prima2-pcicp";
-                                        reg = <0x57900000 0x100000>;
-                                        interrupts = <40>;
-                                };
-                                rom-interface@57a00000 {
-                                        compatible = "sirf,prima2-romif";
-                                        reg = <0x57a00000 0x100000>;
-                                };
-                        };
-                };
-                rtc-iobg {
-                        compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        reg = <0x80030000 0x10000>;
-                        gpsrtc@1000 {
-                                compatible = "sirf,prima2-gpsrtc";
-                                reg = <0x1000 0x1000>;
-                                interrupts = <55 56 57>;
-                        };
-                        sysrtc@2000 {
-                                compatible = "sirf,prima2-sysrtc";
-                                reg = <0x2000 0x1000>;
-                                interrupts = <52 53 54>;
-                        };
-                        pwrc@3000 {
-                                compatible = "sirf,prima2-pwrc";
-                                reg = <0x3000 0x1000>;
-                                interrupts = <32>;
-                        };
-                };
-                uus-iobg {
-                        compatible = "simple-bus";
-                        #address-cells = <1>;
-                        #size-cells = <1>;
-                        ranges = <0xb8000000 0xb8000000 0x40000>;
-                        usb0: usb@b00e0000 {
-                                compatible = "chipidea,ci13611a-prima2";
-                                reg = <0xb8000000 0x10000>;
-                                interrupts = <10>;
-                        };
-                        usb1: usb@b00f0000 {
-                                compatible = "chipidea,ci13611a-prima2";
-                                reg = <0xb8010000 0x10000>;
-                                interrupts = <11>;
-                        };
-                        sata@b00f0000 {
-                                compatible = "synopsys,dwc-ahsata";
-                                reg = <0xb8020000 0x10000>;
-                                interrupts = <37>;
-                        };
-                        security@b00f0000 {
-                                compatible = "sirf,prima2-security";
-                                reg = <0xb8030000 0x10000>;
-                                interrupts = <42>;
-                        };
-                };
-        };
-};
diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts
new file mode 100644
index 000000000000..57286b4e7b87
--- /dev/null
+++ b/arch/arm/boot/dts/prima2-evb.dts
@@ -0,0 +1,37 @@
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "prima2.dtsi"
+/ {
+        model = "CSR SiRFprimaII Evaluation Board";
+        compatible = "sirf,prima2", "sirf,prima2-cb";
+        memory {
+                reg = <0x00000000 0x20000000>;
+        };
+        axi {
+                peri-iobg {
+                        uart@b0060000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&uart1_pins_a>;
+                        };
+                        spi@b00d0000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&spi0_pins_a>;
+                        };
+                        spi@b0170000 {
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&spi1_pins_a>;
+                        };
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
new file mode 100644
index 000000000000..055fca542120
--- /dev/null
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -0,0 +1,640 @@
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "skeleton.dtsi"
+/ {
+        compatible = "sirf,prima2";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&intc>;
+        cpus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                cpu@0 {
+                        reg = <0x0>;
+                        d-cache-line-size = <32>;
+                        i-cache-line-size = <32>;
+                        d-cache-size = <32768>;
+                        i-cache-size = <32768>;
+                        /* from bootloader */
+                        timebase-frequency = <0>;
+                        bus-frequency = <0>;
+                        clock-frequency = <0>;
+                };
+        };
+        axi {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges = <0x40000000 0x40000000 0x80000000>;
+                l2-cache-controller@80040000 {
+                        compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
+                        reg = <0x80040000 0x1000>;
+                        interrupts = <59>;
+                        arm,tag-latency = <1 1 1>;
+                        arm,data-latency = <1 1 1>;
+                        arm,filter-ranges = <0 0x40000000>;
+                };
+                intc: interrupt-controller@80020000 {
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                        compatible = "sirf,prima2-intc";
+                        reg = <0x80020000 0x1000>;
+                };
+                sys-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0x88000000 0x88000000 0x40000>;
+                        clock-controller@88000000 {
+                                compatible = "sirf,prima2-clkc";
+                                reg = <0x88000000 0x1000>;
+                                interrupts = <3>;
+                        };
+                        reset-controller@88010000 {
+                                compatible = "sirf,prima2-rstc";
+                                reg = <0x88010000 0x1000>;
+                        };
+                        rsc-controller@88020000 {
+                                compatible = "sirf,prima2-rsc";
+                                reg = <0x88020000 0x1000>;
+                        };
+                };
+                mem-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0x90000000 0x90000000 0x10000>;
+                        memory-controller@90000000 {
+                                compatible = "sirf,prima2-memc";
+                                reg = <0x90000000 0x10000>;
+                                interrupts = <27>;
+                        };
+                };
+                disp-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0x90010000 0x90010000 0x30000>;
+                        display@90010000 {
+                                compatible = "sirf,prima2-lcd";
+                                reg = <0x90010000 0x20000>;
+                                interrupts = <30>;
+                        };
+                        vpp@90020000 {
+                                compatible = "sirf,prima2-vpp";
+                                reg = <0x90020000 0x10000>;
+                                interrupts = <31>;
+                        };
+                };
+                graphics-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0x98000000 0x98000000 0x8000000>;
+                        graphics@98000000 {
+                                compatible = "powervr,sgx531";
+                                reg = <0x98000000 0x8000000>;
+                                interrupts = <6>;
+                        };
+                };
+                multimedia-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0xa0000000 0xa0000000 0x8000000>;
+                        multimedia@a0000000 {
+                                compatible = "sirf,prima2-video-codec";
+                                reg = <0xa0000000 0x8000000>;
+                                interrupts = <5>;
+                        };
+                };
+                dsp-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0xa8000000 0xa8000000 0x2000000>;
+                        dspif@a8000000 {
+                                compatible = "sirf,prima2-dspif";
+                                reg = <0xa8000000 0x10000>;
+                                interrupts = <9>;
+                        };
+                        gps@a8010000 {
+                                compatible = "sirf,prima2-gps";
+                                reg = <0xa8010000 0x10000>;
+                                interrupts = <7>;
+                        };
+                        dsp@a9000000 {
+                                compatible = "sirf,prima2-dsp";
+                                reg = <0xa9000000 0x1000000>;
+                                interrupts = <8>;
+                        };
+                };
+                peri-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0xb0000000 0xb0000000 0x180000>;
+                        timer@b0020000 {
+                                compatible = "sirf,prima2-tick";
+                                reg = <0xb0020000 0x1000>;
+                                interrupts = <0>;
+                        };
+                        nand@b0030000 {
+                                compatible = "sirf,prima2-nand";
+                                reg = <0xb0030000 0x10000>;
+                                interrupts = <41>;
+                        };
+                        audio@b0040000 {
+                                compatible = "sirf,prima2-audio";
+                                reg = <0xb0040000 0x10000>;
+                                interrupts = <35>;
+                        };
+                        uart0: uart@b0050000 {
+                                cell-index = <0>;
+                                compatible = "sirf,prima2-uart";
+                                reg = <0xb0050000 0x10000>;
+                                interrupts = <17>;
+                        };
+                        uart1: uart@b0060000 {
+                                cell-index = <1>;
+                                compatible = "sirf,prima2-uart";
+                                reg = <0xb0060000 0x10000>;
+                                interrupts = <18>;
+                        };
+                        uart2: uart@b0070000 {
+                                cell-index = <2>;
+                                compatible = "sirf,prima2-uart";
+                                reg = <0xb0070000 0x10000>;
+                                interrupts = <19>;
+                        };
+                        usp0: usp@b0080000 {
+                                cell-index = <0>;
+                                compatible = "sirf,prima2-usp";
+                                reg = <0xb0080000 0x10000>;
+                                interrupts = <20>;
+                        };
+                        usp1: usp@b0090000 {
+                                cell-index = <1>;
+                                compatible = "sirf,prima2-usp";
+                                reg = <0xb0090000 0x10000>;
+                                interrupts = <21>;
+                        };
+                        usp2: usp@b00a0000 {
+                                cell-index = <2>;
+                                compatible = "sirf,prima2-usp";
+                                reg = <0xb00a0000 0x10000>;
+                                interrupts = <22>;
+                        };
+                        dmac0: dma-controller@b00b0000 {
+                                cell-index = <0>;
+                                compatible = "sirf,prima2-dmac";
+                                reg = <0xb00b0000 0x10000>;
+                                interrupts = <12>;
+                        };
+                        dmac1: dma-controller@b0160000 {
+                                cell-index = <1>;
+                                compatible = "sirf,prima2-dmac";
+                                reg = <0xb0160000 0x10000>;
+                                interrupts = <13>;
+                        };
+                        vip@b00C0000 {
+                                compatible = "sirf,prima2-vip";
+                                reg = <0xb00C0000 0x10000>;
+                        };
+                        spi0: spi@b00d0000 {
+                                cell-index = <0>;
+                                compatible = "sirf,prima2-spi";
+                                reg = <0xb00d0000 0x10000>;
+                                interrupts = <15>;
+                        };
+                        spi1: spi@b0170000 {
+                                cell-index = <1>;
+                                compatible = "sirf,prima2-spi";
+                                reg = <0xb0170000 0x10000>;
+                                interrupts = <16>;
+                        };
+                        i2c0: i2c@b00e0000 {
+                                cell-index = <0>;
+                                compatible = "sirf,prima2-i2c";
+                                reg = <0xb00e0000 0x10000>;
+                                interrupts = <24>;
+                        };
+                        i2c1: i2c@b00f0000 {
+                                cell-index = <1>;
+                                compatible = "sirf,prima2-i2c";
+                                reg = <0xb00f0000 0x10000>;
+                                interrupts = <25>;
+                        };
+                        tsc@b0110000 {
+                                compatible = "sirf,prima2-tsc";
+                                reg = <0xb0110000 0x10000>;
+                                interrupts = <33>;
+                        };
+                        gpio: pinctrl@b0120000 {
+                                #gpio-cells = <2>;
+                                #interrupt-cells = <2>;
+                                compatible = "sirf,prima2-pinctrl";
+                                reg = <0xb0120000 0x10000>;
+                                interrupts = <43 44 45 46 47>;
+                                gpio-controller;
+                                interrupt-controller;
+                                lcd_16pins_a: lcd0@0 {
+                                        lcd {
+                                                sirf,pins = "lcd_16bitsgrp";
+                                                sirf,function = "lcd_16bits";
+                                        };
+                                };
+                                lcd_18pins_a: lcd0@1 {
+                                        lcd {
+                                                sirf,pins = "lcd_18bitsgrp";
+                                                sirf,function = "lcd_18bits";
+                                        };
+                                };
+                                lcd_24pins_a: lcd0@2 {
+                                        lcd {
+                                                sirf,pins = "lcd_24bitsgrp";
+                                                sirf,function = "lcd_24bits";
+                                        };
+                                };
+                                lcdrom_pins_a: lcdrom0@0 {
+                                        lcd {
+                                                sirf,pins = "lcdromgrp";
+                                                sirf,function = "lcdrom";
+                                        };
+                                };
+                                uart0_pins_a: uart0@0 {
+                                        uart {
+                                                sirf,pins = "uart0grp";
+                                                sirf,function = "uart0";
+                                        };
+                                };
+                                uart1_pins_a: uart1@0 {
+                                        uart {
+                                                sirf,pins = "uart1grp";
+                                                sirf,function = "uart1";
+                                        };
+                                };
+                                uart2_pins_a: uart2@0 {
+                                        uart {
+                                                sirf,pins = "uart2grp";
+                                                sirf,function = "uart2";
+                                        };
+                                };
+                                uart2_noflow_pins_a: uart2@1 {
+                                        uart {
+                                                sirf,pins = "uart2_nostreamctrlgrp";
+                                                sirf,function = "uart2_nostreamctrl";
+                                        };
+                                };
+                                spi0_pins_a: spi0@0 {
+                                        spi {
+                                                sirf,pins = "spi0grp";
+                                                sirf,function = "spi0";
+                                        };
+                                };
+                                spi1_pins_a: spi1@0 {
+                                        spi {
+                                                sirf,pins = "spi1grp";
+                                                sirf,function = "spi1";
+                                        };
+                                };
+                                i2c0_pins_a: i2c0@0 {
+                                        i2c {
+                                                sirf,pins = "i2c0grp";
+                                                sirf,function = "i2c0";
+                                        };
+                                };
+                                i2c1_pins_a: i2c1@0 {
+                                        i2c {
+                                                sirf,pins = "i2c1grp";
+                                                sirf,function = "i2c1";
+                                        };
+                                };
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc4_pins_a: sdmmc4@0 {
+                                        sdmmc4 {
+                                                sirf,pins = "sdmmc4grp";
+                                                sirf,function = "sdmmc4";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+                                usp2_pins_a: usp2@0 {
+                                        usp2 {
+                                                sirf,pins = "usp2grp";
+                                                sirf,function = "usp2";
+                                        };
+                                };
+                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+                                        usb0_utmi_drvbus {
+                                                sirf,pins = "usb0_utmi_drvbusgrp";
+                                                sirf,function = "usb0_utmi_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_rst_pins_a: cko0_rst@0 {
+                                        cko0_rst {
+                                                sirf,pins = "cko0_rstgrp";
+                                                sirf,function = "cko0_rst";
+                                        };
+                                };
+                                cko1_rst_pins_a: cko1_rst@0 {
+                                        cko1_rst {
+                                                sirf,pins = "cko1_rstgrp";
+                                                sirf,function = "cko1_rst";
+                                        };
+                                };
+                        };
+                        pwm@b0130000 {
+                                compatible = "sirf,prima2-pwm";
+                                reg = <0xb0130000 0x10000>;
+                        };
+                        efusesys@b0140000 {
+                                compatible = "sirf,prima2-efuse";
+                                reg = <0xb0140000 0x10000>;
+                        };
+                        pulsec@b0150000 {
+                                compatible = "sirf,prima2-pulsec";
+                                reg = <0xb0150000 0x10000>;
+                                interrupts = <48>;
+                        };
+                        pci-iobg {
+                                compatible = "sirf,prima2-pciiobg", "simple-bus";
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+                                ranges = <0x56000000 0x56000000 0x1b00000>;
+                                sd0: sdhci@56000000 {
+                                        cell-index = <0>;
+                                        compatible = "sirf,prima2-sdhc";
+                                        reg = <0x56000000 0x100000>;
+                                        interrupts = <38>;
+                                };
+                                sd1: sdhci@56100000 {
+                                        cell-index = <1>;
+                                        compatible = "sirf,prima2-sdhc";
+                                        reg = <0x56100000 0x100000>;
+                                        interrupts = <38>;
+                                };
+                                sd2: sdhci@56200000 {
+                                        cell-index = <2>;
+                                        compatible = "sirf,prima2-sdhc";
+                                        reg = <0x56200000 0x100000>;
+                                        interrupts = <23>;
+                                };
+                                sd3: sdhci@56300000 {
+                                        cell-index = <3>;
+                                        compatible = "sirf,prima2-sdhc";
+                                        reg = <0x56300000 0x100000>;
+                                        interrupts = <23>;
+                                };
+                                sd4: sdhci@56400000 {
+                                        cell-index = <4>;
+                                        compatible = "sirf,prima2-sdhc";
+                                        reg = <0x56400000 0x100000>;
+                                        interrupts = <39>;
+                                };
+                                sd5: sdhci@56500000 {
+                                        cell-index = <5>;
+                                        compatible = "sirf,prima2-sdhc";
+                                        reg = <0x56500000 0x100000>;
+                                        interrupts = <39>;
+                                };
+                                pci-copy@57900000 {
+                                        compatible = "sirf,prima2-pcicp";
+                                        reg = <0x57900000 0x100000>;
+                                        interrupts = <40>;
+                                };
+                                rom-interface@57a00000 {
+                                        compatible = "sirf,prima2-romif";
+                                        reg = <0x57a00000 0x100000>;
+                                };
+                        };
+                };
+                rtc-iobg {
+                        compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x80030000 0x10000>;
+                        gpsrtc@1000 {
+                                compatible = "sirf,prima2-gpsrtc";
+                                reg = <0x1000 0x1000>;
+                                interrupts = <55 56 57>;
+                        };
+                        sysrtc@2000 {
+                                compatible = "sirf,prima2-sysrtc";
+                                reg = <0x2000 0x1000>;
+                                interrupts = <52 53 54>;
+                        };
+                        pwrc@3000 {
+                                compatible = "sirf,prima2-pwrc";
+                                reg = <0x3000 0x1000>;
+                                interrupts = <32>;
+                        };
+                };
+                uus-iobg {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0xb8000000 0xb8000000 0x40000>;
+                        usb0: usb@b00e0000 {
+                                compatible = "chipidea,ci13611a-prima2";
+                                reg = <0xb8000000 0x10000>;
+                                interrupts = <10>;
+                        };
+                        usb1: usb@b00f0000 {
+                                compatible = "chipidea,ci13611a-prima2";
+                                reg = <0xb8010000 0x10000>;
+                                interrupts = <11>;
+                        };
+                        sata@b00f0000 {
+                                compatible = "synopsys,dwc-ahsata";
+                                reg = <0xb8020000 0x10000>;
+                                interrupts = <37>;
+                        };
+                        security@b00f0000 {
+                                compatible = "sirf,prima2-security";
+                                reg = <0xb8030000 0x10000>;
+                                interrupts = <42>;
+                        };
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
new file mode 100644
index 000000000000..d7c5d721a5c7
--- /dev/null
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -0,0 +1,14 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+/ {
+        model = "Marvell PXA27x familiy SoC";
+        compatible = "marvell,pxa27x";
+        pxabus {
+                pxairq: interrupt-controller@40d00000 {
+                        marvell,intc-priority;
+                        marvell,intc-nr-irqs = <34>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
new file mode 100644
index 000000000000..f18aad35e8b3
--- /dev/null
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -0,0 +1,132 @@
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "skeleton.dtsi"
+/ {
+        model = "Marvell PXA2xx family SoC";
+        compatible = "marvell,pxa2xx";
+        interrupt-parent = <&pxairq>;
+        aliases {
+                serial0 = &ffuart;
+                serial1 = &btuart;
+                serial2 = &stuart;
+                serial3 = &hwuart;
+                i2c0 = &pwri2c;
+                i2c1 = &pxai2c1;
+        };
+        cpus {
+                cpu@0 {
+                        compatible = "arm,xscale";
+                };
+        };
+        pxabus {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+                pxairq: interrupt-controller@40d00000 {
+                        #interrupt-cells = <1>;
+                        compatible = "marvell,pxa-intc";
+                        interrupt-controller;
+                        interrupt-parent;
+                        marvell,intc-nr-irqs = <32>;
+                        reg = <0x40d00000 0xd0>;
+                };
+                gpio: gpio@40e00000 {
+                        compatible = "mrvl,pxa-gpio";
+                        #address-cells = <0x1>;
+                        #size-cells = <0x1>;
+                        reg = <0x40e00000 0x10000>;
+                        gpio-controller;
+                        #gpio-cells = <0x2>;
+                        interrupts = <10>;
+                        interrupt-names = "gpio_mux";
+                        interrupt-controller;
+                        #interrupt-cells = <0x2>;
+                        ranges;
+                        gcb0: gpio@40e00000 {
+                                reg = <0x40e00000 0x4>;
+                        };
+                        gcb1: gpio@40e00004 {
+                                reg = <0x40e00004 0x4>;
+                        };
+                        gcb2: gpio@40e00008 {
+                                reg = <0x40e00008 0x4>;
+                        };
+                        gcb3: gpio@40e0000c {
+                                reg = <0x40e0000c 0x4>;
+                        };
+                };
+                ffuart: uart@40100000 {
+                        compatible = "mrvl,pxa-uart";
+                        reg = <0x40100000 0x30>;
+                        interrupts = <22>;
+                        status = "disabled";
+                };
+                btuart: uart@40200000 {
+                        compatible = "mrvl,pxa-uart";
+                        reg = <0x40200000 0x30>;
+                        interrupts = <21>;
+                        status = "disabled";
+                };
+                stuart: uart@40700000 {
+                        compatible = "mrvl,pxa-uart";
+                        reg = <0x40700000 0x30>;
+                        interrupts = <20>;
+                        status = "disabled";
+                };
+                hwuart: uart@41100000 {
+                        compatible = "mrvl,pxa-uart";
+                        reg = <0x41100000 0x30>;
+                        interrupts = <7>;
+                        status = "disabled";
+                };
+                pxai2c1: i2c@40301680 {
+                        compatible = "mrvl,pxa-i2c";
+                        reg = <0x40301680 0x30>;
+                        interrupts = <18>;
+                        #address-cells = <0x1>;
+                        #size-cells = <0>;
+                        status = "disabled";
+                };
+                usb0: ohci@4c000000 {
+                        compatible = "mrvl,pxa-ohci";
+                        reg = <0x4c000000 0x10000>;
+                        interrupts = <3>;
+                        status = "disabled";
+                };
+                mmc0: mmc@41100000 {
+                        compatible = "mrvl,pxa-mmc";
+                        reg = <0x41100000 0x1000>;
+                        interrupts = <23>;
+                        status = "disabled";
+                };
+                rtc@40900000 {
+                        compatible = "marvell,pxa-rtc";
+                        reg = <0x40900000 0x3c>;
+                        interrupts = <30 31>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
new file mode 100644
index 000000000000..f9d92da86783
--- /dev/null
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -0,0 +1,32 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+/ {
+        model = "Marvell PXA3xx familiy SoC";
+        compatible = "marvell,pxa3xx";
+        pxabus {
+                pwri2c: i2c@40f500c0 {
+                        compatible = "mrvl,pwri2c";
+                        reg = <0x40f500c0 0x30>;
+                        interrupts = <6>;
+                        #address-cells = <0x1>;
+                        #size-cells = <0>;
+                        status = "disabled";
+                };
+                nand0: nand@43100000 {
+                        compatible = "marvell,pxa3xx-nand";
+                        reg = <0x43100000 90>;
+                        interrupts = <45>;
+                        #address-cells = <1>;
+                        #size-cells = <1>;      
+                        status = "disabled";
+                };
+                pxairq: interrupt-controller@40d00000 {
+                        marvell,intc-priority;
+                        marvell,intc-nr-irqs = <56>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index aebf32de73b4..a3be44d86bcd 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -25,6 +25,11 @@
                interrupt-parent = <&intc>;
                ranges;
+                L2: l2-cache {
+                        compatible = "marvell,tauros2-cache";
+                        marvell,tauros2-cache-features = <0x3>;
+                };
                axi@d4200000 {  /* AXI */
                        compatible = "mrvl,axi-bus", "simple-bus";
                        #address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
new file mode 100644
index 000000000000..a2d6d6541f83
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,58 @@
+/dts-v1/;
+/include/ "tegra20-tamonten.dtsi"
+/ {
+        model = "Avionic Design Medcom-Wide board";
+        compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+        i2c@7000c000 {
+                wm8903: wm8903@1a {
+                        compatible = "wlf,wm8903";
+                        reg = <0x1a>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <187 0x04>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                        micdet-cfg = <0>;
+                        micdet-delay = <100>;
+                        gpio-cfg = <0xffffffff
+                                    0xffffffff
+                                    0
+                                    0xffffffff
+                                    0xffffffff>;
+                };
+        };
+        backlight {
+                compatible = "pwm-backlight";
+                pwms = <&pwm 0 5000000>;
+                brightness-levels = <0 4 8 16 32 64 128 255>;
+                default-brightness-level = <6>;
+        };
+        sound {
+                compatible = "ad,tegra-audio-wm8903-medcom-wide",
+                             "nvidia,tegra-audio-wm8903";
+                nvidia,model = "Avionic Design Medcom-Wide";
+                nvidia,audio-routing =
+                        "Headphone Jack", "HPOUTR",
+                        "Headphone Jack", "HPOUTL",
+                        "Int Spk", "ROP",
+                        "Int Spk", "RON",
+                        "Int Spk", "LOP",
+                        "Int Spk", "LON",
+                        "Mic Jack", "MICBIAS",
+                        "IN1L", "Mic Jack";
+                nvidia,i2s-controller = <&tegra_i2s1>;
+                nvidia,audio-codec = <&wm8903>;
+                nvidia,spkr-en-gpios = <&wm8903 2 0>;
+                nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+        };
+};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 684a9e1ff7e9..ddf287f52d49 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -272,12 +272,170 @@
                status = "okay";
                clock-frequency = <400000>;
+                pmic: tps6586x@34 {
+                        compatible = "ti,tps6586x";
+                        reg = <0x34>;
+                        interrupts = <0 86 0x4>;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        sys-supply = <&p5valw_reg>;
+                        vin-sm0-supply = <&sys_reg>;
+                        vin-sm1-supply = <&sys_reg>;
+                        vin-sm2-supply = <&sys_reg>;
+                        vinldo01-supply = <&sm2_reg>;
+                        vinldo23-supply = <&sm2_reg>;
+                        vinldo4-supply = <&sm2_reg>;
+                        vinldo678-supply = <&sm2_reg>;
+                        vinldo9-supply = <&sm2_reg>;
+                        regulators {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                sys_reg: regulator@0 {
+                                        reg = <0>;
+                                        regulator-compatible = "sys";
+                                        regulator-name = "vdd_sys";
+                                        regulator-always-on;
+                                };
+                                regulator@1 {
+                                        reg = <1>;
+                                        regulator-compatible = "sm0";
+                                        regulator-name = "+1.2vs_sm0,vdd_core";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                regulator@2 {
+                                        reg = <2>;
+                                        regulator-compatible = "sm1";
+                                        regulator-name = "+1.0vs_sm1,vdd_cpu";
+                                        regulator-min-microvolt = <1000000>;
+                                        regulator-max-microvolt = <1000000>;
+                                        regulator-always-on;
+                                };
+                                sm2_reg: regulator@3 {
+                                        reg = <3>;
+                                        regulator-compatible = "sm2";
+                                        regulator-name = "+3.7vs_sm2,vin_ldo*";
+                                        regulator-min-microvolt = <3700000>;
+                                        regulator-max-microvolt = <3700000>;
+                                        regulator-always-on;
+                                };
+                                /* LDO0 is not connected to anything */
+                                regulator@5 {
+                                        reg = <5>;
+                                        regulator-compatible = "ldo1";
+                                        regulator-name = "+1.1vs_ldo1,avdd_pll*";
+                                        regulator-min-microvolt = <1100000>;
+                                        regulator-max-microvolt = <1100000>;
+                                        regulator-always-on;
+                                };
+                                regulator@6 {
+                                        reg = <6>;
+                                        regulator-compatible = "ldo2";
+                                        regulator-name = "+1.2vs_ldo2,vdd_rtc";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                };
+                                regulator@7 {
+                                        reg = <7>;
+                                        regulator-compatible = "ldo3";
+                                        regulator-name = "+3.3vs_ldo3,avdd_usb*";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                                regulator@8 {
+                                        reg = <8>;
+                                        regulator-compatible = "ldo4";
+                                        regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@9 {
+                                        reg = <9>;
+                                        regulator-compatible = "ldo5";
+                                        regulator-name = "+2.85vs_ldo5,vcore_mmc";
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                        regulator-always-on;
+                                };
+                                regulator@10 {
+                                        reg = <10>;
+                                        regulator-compatible = "ldo6";
+                                        /*
+                                         * Research indicates this should be
+                                         * 1.8v; other boards that use this
+                                         * rail for the same purpose need it
+                                         * set to 1.8v. The schematic signal
+                                         * name is incorrect; perhaps copied
+                                         * from an incorrect NVIDIA reference.
+                                         */
+                                        regulator-name = "+2.85vs_ldo6,avdd_vdac";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@11 {
+                                        reg = <11>;
+                                        regulator-compatible = "ldo7";
+                                        regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                };
+                                regulator@12 {
+                                        reg = <12>;
+                                        regulator-compatible = "ldo8";
+                                        regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@13 {
+                                        reg = <13>;
+                                        regulator-compatible = "ldo9";
+                                        regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                        regulator-always-on;
+                                };
+                                regulator@14 {
+                                        reg = <14>;
+                                        regulator-compatible = "ldo_rtc";
+                                        regulator-name = "+3.3vs_rtc";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                        };
+                };
                adt7461@4c {
                        compatible = "adi,adt7461";
                        reg = <0x4c>;
                };
        };
+        pmc {
+                nvidia,invert-interrupt;
+        };
        usb@c5000000 {
                status = "okay";
        };
@@ -325,6 +483,21 @@
                };
        };
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                p5valw_reg: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "+5valw";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                };
+        };
        sound {
                compatible = "nvidia,tegra-audio-alc5632-paz00",
                        "nvidia,tegra-audio-alc5632";
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
new file mode 100644
index 000000000000..331a3ef24d59
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -0,0 +1,50 @@
+/dts-v1/;
+/include/ "tegra20-tamonten.dtsi"
+/ {
+        model = "Avionic Design Plutux board";
+        compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+        i2c@7000c000 {
+                wm8903: wm8903@1a {
+                        compatible = "wlf,wm8903";
+                        reg = <0x1a>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <187 0x04>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                        micdet-cfg = <0>;
+                        micdet-delay = <100>;
+                        gpio-cfg = <0xffffffff
+                                    0xffffffff
+                                    0
+                                    0xffffffff
+                                    0xffffffff>;
+                };
+        };
+        sound {
+                compatible = "ad,tegra-audio-plutux",
+                             "nvidia,tegra-audio-wm8903";
+                nvidia,model = "Avionic Design Plutux";
+                nvidia,audio-routing =
+                        "Headphone Jack", "HPOUTR",
+                        "Headphone Jack", "HPOUTL",
+                        "Int Spk", "ROP",
+                        "Int Spk", "RON",
+                        "Int Spk", "LOP",
+                        "Int Spk", "LON",
+                        "Mic Jack", "MICBIAS",
+                        "IN1L", "Mic Jack";
+                nvidia,i2s-controller = <&tegra_i2s1>;
+                nvidia,audio-codec = <&wm8903>;
+                nvidia,spkr-en-gpios = <&wm8903 2 0>;
+                nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+        };
+};
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 85e621ab2968..e60dc7124e92 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -374,6 +374,154 @@
                status = "okay";
                clock-frequency = <400000>;
+                pmic: tps6586x@34 {
+                        compatible = "ti,tps6586x";
+                        reg = <0x34>;
+                        interrupts = <0 86 0x4>;
+                        ti,system-power-controller;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        sys-supply = <&vdd_5v0_reg>;
+                        vin-sm0-supply = <&sys_reg>;
+                        vin-sm1-supply = <&sys_reg>;
+                        vin-sm2-supply = <&sys_reg>;
+                        vinldo01-supply = <&sm2_reg>;
+                        vinldo23-supply = <&sm2_reg>;
+                        vinldo4-supply = <&sm2_reg>;
+                        vinldo678-supply = <&sm2_reg>;
+                        vinldo9-supply = <&sm2_reg>;
+                        regulators {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                sys_reg: regulator@0 {
+                                        reg = <0>;
+                                        regulator-compatible = "sys";
+                                        regulator-name = "vdd_sys";
+                                        regulator-always-on;
+                                };
+                                regulator@1 {
+                                        reg = <1>;
+                                        regulator-compatible = "sm0";
+                                        regulator-name = "vdd_sm0,vdd_core";
+                                        regulator-min-microvolt = <1300000>;
+                                        regulator-max-microvolt = <1300000>;
+                                        regulator-always-on;
+                                };
+                                regulator@2 {
+                                        reg = <2>;
+                                        regulator-compatible = "sm1";
+                                        regulator-name = "vdd_sm1,vdd_cpu";
+                                        regulator-min-microvolt = <1125000>;
+                                        regulator-max-microvolt = <1125000>;
+                                        regulator-always-on;
+                                };
+                                sm2_reg: regulator@3 {
+                                        reg = <3>;
+                                        regulator-compatible = "sm2";
+                                        regulator-name = "vdd_sm2,vin_ldo*";
+                                        regulator-min-microvolt = <3700000>;
+                                        regulator-max-microvolt = <3700000>;
+                                        regulator-always-on;
+                                };
+                                /* LDO0 is not connected to anything */
+                                regulator@5 {
+                                        reg = <5>;
+                                        regulator-compatible = "ldo1";
+                                        regulator-name = "vdd_ldo1,avdd_pll*";
+                                        regulator-min-microvolt = <1100000>;
+                                        regulator-max-microvolt = <1100000>;
+                                        regulator-always-on;
+                                };
+                                regulator@6 {
+                                        reg = <6>;
+                                        regulator-compatible = "ldo2";
+                                        regulator-name = "vdd_ldo2,vdd_rtc";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                };
+                                regulator@7 {
+                                        reg = <7>;
+                                        regulator-compatible = "ldo3";
+                                        regulator-name = "vdd_ldo3,avdd_usb*";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                                regulator@8 {
+                                        reg = <8>;
+                                        regulator-compatible = "ldo4";
+                                        regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@9 {
+                                        reg = <9>;
+                                        regulator-compatible = "ldo5";
+                                        regulator-name = "vdd_ldo5,vcore_mmc";
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                        regulator-always-on;
+                                };
+                                regulator@10 {
+                                        reg = <10>;
+                                        regulator-compatible = "ldo6";
+                                        regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@11 {
+                                        reg = <11>;
+                                        regulator-compatible = "ldo7";
+                                        regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                };
+                                regulator@12 {
+                                        reg = <12>;
+                                        regulator-compatible = "ldo8";
+                                        regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@13 {
+                                        reg = <13>;
+                                        regulator-compatible = "ldo9";
+                                        regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                        regulator-always-on;
+                                };
+                                regulator@14 {
+                                        reg = <14>;
+                                        regulator-compatible = "ldo_rtc";
+                                        regulator-name = "vdd_rtc_out,vdd_cell";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                        };
+                };
                temperature-sensor@4c {
                        compatible = "nct1008";
                        reg = <0x4c>;
@@ -387,6 +535,10 @@
                };
        };
+        pmc {
+                nvidia,invert-interrupt;
+        };
        memory-controller@0x7000f400 {
                emc-table@190000 {
                        reg = <190000>;
@@ -473,6 +625,40 @@
                };
        };
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                vdd_5v0_reg: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "vdd_5v0";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                };
+                regulator@1 {
+                        compatible = "regulator-fixed";
+                        reg = <1>;
+                        regulator-name = "vdd_1v5";
+                        regulator-min-microvolt = <1500000>;
+                        regulator-max-microvolt = <1500000>;
+                        gpio = <&pmic 0 0>;
+                };
+                regulator@2 {
+                        compatible = "regulator-fixed";
+                        reg = <2>;
+                        regulator-name = "vdd_1v2";
+                        regulator-min-microvolt = <1200000>;
+                        regulator-max-microvolt = <1200000>;
+                        gpio = <&pmic 1 0>;
+                        enable-active-high;
+                };
+        };
        sound {
                compatible = "nvidia,tegra-audio-wm8903-seaboard",
                             "nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
new file mode 100644
index 000000000000..f18cec9f6a77
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,449 @@
+/include/ "tegra20.dtsi"
+/ {
+        model = "Avionic Design Tamonten SOM";
+        compatible = "ad,tamonten", "nvidia,tegra20";
+        memory {
+                reg = <0x00000000 0x20000000>;
+        };
+        pinmux {
+                pinctrl-names = "default";
+                pinctrl-0 = <&state_default>;
+                state_default: pinmux {
+                        ata {
+                                nvidia,pins = "ata";
+                                nvidia,function = "ide";
+                        };
+                        atb {
+                                nvidia,pins = "atb", "gma", "gme";
+                                nvidia,function = "sdio4";
+                        };
+                        atc {
+                                nvidia,pins = "atc";
+                                nvidia,function = "nand";
+                        };
+                        atd {
+                                nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+                                        "spia", "spib", "spic";
+                                nvidia,function = "gmi";
+                        };
+                        cdev1 {
+                                nvidia,pins = "cdev1";
+                                nvidia,function = "plla_out";
+                        };
+                        cdev2 {
+                                nvidia,pins = "cdev2";
+                                nvidia,function = "pllp_out4";
+                        };
+                        crtp {
+                                nvidia,pins = "crtp";
+                                nvidia,function = "crt";
+                        };
+                        csus {
+                                nvidia,pins = "csus";
+                                nvidia,function = "vi_sensor_clk";
+                        };
+                        dap1 {
+                                nvidia,pins = "dap1";
+                                nvidia,function = "dap1";
+                        };
+                        dap2 {
+                                nvidia,pins = "dap2";
+                                nvidia,function = "dap2";
+                        };
+                        dap3 {
+                                nvidia,pins = "dap3";
+                                nvidia,function = "dap3";
+                        };
+                        dap4 {
+                                nvidia,pins = "dap4";
+                                nvidia,function = "dap4";
+                        };
+                        ddc {
+                                nvidia,pins = "ddc";
+                                nvidia,function = "i2c2";
+                        };
+                        dta {
+                                nvidia,pins = "dta", "dtd";
+                                nvidia,function = "sdio2";
+                        };
+                        dtb {
+                                nvidia,pins = "dtb", "dtc", "dte";
+                                nvidia,function = "rsvd1";
+                        };
+                        dtf {
+                                nvidia,pins = "dtf";
+                                nvidia,function = "i2c3";
+                        };
+                        gmc {
+                                nvidia,pins = "gmc";
+                                nvidia,function = "uartd";
+                        };
+                        gpu7 {
+                                nvidia,pins = "gpu7";
+                                nvidia,function = "rtck";
+                        };
+                        gpv {
+                                nvidia,pins = "gpv", "slxa", "slxk";
+                                nvidia,function = "pcie";
+                        };
+                        hdint {
+                                nvidia,pins = "hdint", "pta";
+                                nvidia,function = "hdmi";
+                        };
+                        i2cp {
+                                nvidia,pins = "i2cp";
+                                nvidia,function = "i2cp";
+                        };
+                        irrx {
+                                nvidia,pins = "irrx", "irtx";
+                                nvidia,function = "uarta";
+                        };
+                        kbca {
+                                nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+                                        "kbce", "kbcf";
+                                nvidia,function = "kbc";
+                        };
+                        lcsn {
+                                nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+                                        "ld3", "ld4", "ld5", "ld6", "ld7",
+                                        "ld8", "ld9", "ld10", "ld11", "ld12",
+                                        "ld13", "ld14", "ld15", "ld16", "ld17",
+                                        "ldc", "ldi", "lhp0", "lhp1", "lhp2",
+                                        "lhs", "lm0", "lm1", "lpp", "lpw0",
+                                        "lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+                                        "lsda", "lsdi", "lspi", "lvp0", "lvp1",
+                                        "lvs";
+                                nvidia,function = "displaya";
+                        };
+                        owc {
+                                nvidia,pins = "owc", "spdi", "spdo", "uac";
+                                nvidia,function = "rsvd2";
+                        };
+                        pmc {
+                                nvidia,pins = "pmc";
+                                nvidia,function = "pwr_on";
+                        };
+                        rm {
+                                nvidia,pins = "rm";
+                                nvidia,function = "i2c1";
+                        };
+                        sdb {
+                                nvidia,pins = "sdb", "sdc", "sdd";
+                                nvidia,function = "pwm";
+                        };
+                        sdio1 {
+                                nvidia,pins = "sdio1";
+                                nvidia,function = "sdio1";
+                        };
+                        slxc {
+                                nvidia,pins = "slxc", "slxd";
+                                nvidia,function = "spdif";
+                        };
+                        spid {
+                                nvidia,pins = "spid", "spie", "spif";
+                                nvidia,function = "spi1";
+                        };
+                        spig {
+                                nvidia,pins = "spig", "spih";
+                                nvidia,function = "spi2_alt";
+                        };
+                        uaa {
+                                nvidia,pins = "uaa", "uab", "uda";
+                                nvidia,function = "ulpi";
+                        };
+                        uad {
+                                nvidia,pins = "uad";
+                                nvidia,function = "irda";
+                        };
+                        uca {
+                                nvidia,pins = "uca", "ucb";
+                                nvidia,function = "uartc";
+                        };
+                        conf_ata {
+                                nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+                                        "cdev1", "cdev2", "dap1", "dtb", "gma",
+                                        "gmb", "gmc", "gmd", "gme", "gpu7",
+                                        "gpv", "i2cp", "pta", "rm", "slxa",
+                                        "slxk", "spia", "spib", "uac";
+                                nvidia,pull = <0>;
+                                nvidia,tristate = <0>;
+                        };
+                        conf_ck32 {
+                                nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+                                        "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+                                nvidia,pull = <0>;
+                        };
+                        conf_csus {
+                                nvidia,pins = "csus", "spid", "spif";
+                                nvidia,pull = <1>;
+                                nvidia,tristate = <1>;
+                        };
+                        conf_crtp {
+                                nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+                                        "dtc", "dte", "dtf", "gpu", "sdio1",
+                                        "slxc", "slxd", "spdi", "spdo", "spig",
+                                        "uda";
+                                nvidia,pull = <0>;
+                                nvidia,tristate = <1>;
+                        };
+                        conf_ddc {
+                                nvidia,pins = "ddc", "dta", "dtd", "kbca",
+                                        "kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+                                        "sdc";
+                                nvidia,pull = <2>;
+                                nvidia,tristate = <0>;
+                        };
+                        conf_hdint {
+                                nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+                                        "lpw1", "lsc1", "lsck", "lsda", "lsdi",
+                                        "lvp0", "owc", "sdb";
+                                nvidia,tristate = <1>;
+                        };
+                        conf_irrx {
+                                nvidia,pins = "irrx", "irtx", "sdd", "spic",
+                                        "spie", "spih", "uaa", "uab", "uad",
+                                        "uca", "ucb";
+                                nvidia,pull = <2>;
+                                nvidia,tristate = <1>;
+                        };
+                        conf_lc {
+                                nvidia,pins = "lc", "ls";
+                                nvidia,pull = <2>;
+                        };
+                        conf_ld0 {
+                                nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+                                        "ld5", "ld6", "ld7", "ld8", "ld9",
+                                        "ld10", "ld11", "ld12", "ld13", "ld14",
+                                        "ld15", "ld16", "ld17", "ldi", "lhp0",
+                                        "lhp1", "lhp2", "lhs", "lm0", "lpp",
+                                        "lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+                                        "lvs", "pmc";
+                                nvidia,tristate = <0>;
+                        };
+                        conf_ld17_0 {
+                                nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+                                        "ld23_22";
+                                nvidia,pull = <1>;
+                        };
+                };
+        };
+        i2s@70002800 {
+                status = "okay";
+        };
+        serial@70006300 {
+                clock-frequency = <216000000>;
+                status = "okay";
+        };
+        i2c@7000c000 {
+                clock-frequency = <400000>;
+                status = "okay";
+        };
+        i2c@7000d000 {
+                clock-frequency = <400000>;
+                status = "okay";
+                pmic: tps6586x@34 {
+                        compatible = "ti,tps6586x";
+                        reg = <0x34>;
+                        interrupts = <0 86 0x4>;
+                        ti,system-power-controller;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        sys-supply = <&vdd_5v0_reg>;
+                        vin-sm0-supply = <&sys_reg>;
+                        vin-sm1-supply = <&sys_reg>;
+                        vin-sm2-supply = <&sys_reg>;
+                        vinldo01-supply = <&sm2_reg>;
+                        vinldo23-supply = <&sm2_reg>;
+                        vinldo4-supply = <&sm2_reg>;
+                        vinldo678-supply = <&sm2_reg>;
+                        vinldo9-supply = <&sm2_reg>;
+                        regulators {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                sys_reg: regulator@0 {
+                                        reg = <0>;
+                                        regulator-compatible = "sys";
+                                        regulator-name = "vdd_sys";
+                                        regulator-always-on;
+                                };
+                                regulator@1 {
+                                        reg = <1>;
+                                        regulator-compatible = "sm0";
+                                        regulator-name = "vdd_sys_sm0,vdd_core";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                regulator@2 {
+                                        reg = <2>;
+                                        regulator-compatible = "sm1";
+                                        regulator-name = "vdd_sys_sm1,vdd_cpu";
+                                        regulator-min-microvolt = <1000000>;
+                                        regulator-max-microvolt = <1000000>;
+                                        regulator-always-on;
+                                };
+                                sm2_reg: regulator@3 {
+                                        reg = <3>;
+                                        regulator-compatible = "sm2";
+                                        regulator-name = "vdd_sys_sm2,vin_ldo*";
+                                        regulator-min-microvolt = <3700000>;
+                                        regulator-max-microvolt = <3700000>;
+                                        regulator-always-on;
+                                };
+                                regulator@4 {
+                                        reg = <4>;
+                                        regulator-compatible = "ldo0";
+                                        regulator-name = "vdd_ldo0,vddio_pex_clk";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                };
+                                regulator@5 {
+                                        reg = <5>;
+                                        regulator-compatible = "ldo1";
+                                        regulator-name = "vdd_ldo1,avdd_pll*";
+                                        regulator-min-microvolt = <1100000>;
+                                        regulator-max-microvolt = <1100000>;
+                                        regulator-always-on;
+                                };
+                                regulator@6 {
+                                        reg = <6>;
+                                        regulator-compatible = "ldo2";
+                                        regulator-name = "vdd_ldo2,vdd_rtc";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                };
+                                regulator@7 {
+                                        reg = <7>;
+                                        regulator-compatible = "ldo3";
+                                        regulator-name = "vdd_ldo3,avdd_usb*";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                                regulator@8 {
+                                        reg = <8>;
+                                        regulator-compatible = "ldo4";
+                                        regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@9 {
+                                        reg = <9>;
+                                        regulator-compatible = "ldo5";
+                                        regulator-name = "vdd_ldo5,vcore_mmc";
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                };
+                                regulator@10 {
+                                        reg = <10>;
+                                        regulator-compatible = "ldo6";
+                                        regulator-name = "vdd_ldo6,avdd_vdac";
+                                        /*
+                                         * According to the Tegra 2 Automotive
+                                         * DataSheet, a typical value for this
+                                         * would be 2.8V, but the PMIC only
+                                         * supports 2.85V.
+                                         */
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                };
+                                regulator@11 {
+                                        reg = <11>;
+                                        regulator-compatible = "ldo7";
+                                        regulator-name = "vdd_ldo7,avdd_hdmi";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                };
+                                regulator@12 {
+                                        reg = <12>;
+                                        regulator-compatible = "ldo8";
+                                        regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@13 {
+                                        reg = <13>;
+                                        regulator-compatible = "ldo9";
+                                        regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+                                        /*
+                                         * According to the Tegra 2 Automotive
+                                         * DataSheet, a typical value for this
+                                         * would be 2.8V, but the PMIC only
+                                         * supports 2.85V.
+                                         */
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                        regulator-always-on;
+                                };
+                                regulator@14 {
+                                        reg = <14>;
+                                        regulator-compatible = "ldo_rtc";
+                                        regulator-name = "vdd_rtc_out";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                        };
+                };
+        };
+        pmc {
+                nvidia,invert-interrupt;
+        };
+        usb@c5008000 {
+                status = "okay";
+        };
+        sdhci@c8000600 {
+                cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+                wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+                bus-width = <4>;
+                status = "okay";
+        };
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                vdd_5v0_reg: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "vdd_5v0";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
new file mode 100644
index 000000000000..9aff31b0fe4a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+/include/ "tegra20-tamonten.dtsi"
+/ {
+        model = "Avionic Design Tamonten Evaluation Carrier";
+        compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+        i2c@7000c000 {
+                clock-frequency = <400000>;
+                status = "okay";
+                wm8903: wm8903@1a {
+                        compatible = "wlf,wm8903";
+                        reg = <0x1a>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <187 0x04>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                        micdet-cfg = <0>;
+                        micdet-delay = <100>;
+                        gpio-cfg = <0xffffffff
+                                    0xffffffff
+                                    0
+                                    0xffffffff
+                                    0xffffffff>;
+                };
+        };
+        sound {
+                compatible = "ad,tegra-audio-wm8903-tec",
+                             "nvidia,tegra-audio-wm8903";
+                nvidia,model = "Avionic Design TEC";
+                nvidia,audio-routing =
+                        "Headphone Jack", "HPOUTR",
+                        "Headphone Jack", "HPOUTL",
+                        "Int Spk", "ROP",
+                        "Int Spk", "RON",
+                        "Int Spk", "LOP",
+                        "Int Spk", "LON",
+                        "Mic Jack", "MICBIAS",
+                        "IN1L", "Mic Jack";
+                nvidia,i2s-controller = <&tegra_i2s1>;
+                nvidia,audio-codec = <&wm8903>;
+                nvidia,spkr-en-gpios = <&wm8903 2 0>;
+                nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+        };
+};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index be90544e6b59..3e5952fcfbc5 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -289,6 +289,158 @@
        i2c@7000d000 {
                status = "okay";
                clock-frequency = <400000>;
+                pmic: tps6586x@34 {
+                        compatible = "ti,tps6586x";
+                        reg = <0x34>;
+                        interrupts = <0 86 0x4>;
+                        ti,system-power-controller;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        sys-supply = <&vdd_5v0_reg>;
+                        vin-sm0-supply = <&sys_reg>;
+                        vin-sm1-supply = <&sys_reg>;
+                        vin-sm2-supply = <&sys_reg>;
+                        vinldo01-supply = <&sm2_reg>;
+                        vinldo23-supply = <&sm2_reg>;
+                        vinldo4-supply = <&sm2_reg>;
+                        vinldo678-supply = <&sm2_reg>;
+                        vinldo9-supply = <&sm2_reg>;
+                        regulators {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                sys_reg: regulator@0 {
+                                        reg = <0>;
+                                        regulator-compatible = "sys";
+                                        regulator-name = "vdd_sys";
+                                        regulator-always-on;
+                                };
+                                regulator@1 {
+                                        reg = <1>;
+                                        regulator-compatible = "sm0";
+                                        regulator-name = "vdd_sm0,vdd_core";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                regulator@2 {
+                                        reg = <2>;
+                                        regulator-compatible = "sm1";
+                                        regulator-name = "vdd_sm1,vdd_cpu";
+                                        regulator-min-microvolt = <1000000>;
+                                        regulator-max-microvolt = <1000000>;
+                                        regulator-always-on;
+                                };
+                                sm2_reg: regulator@3 {
+                                        reg = <3>;
+                                        regulator-compatible = "sm2";
+                                        regulator-name = "vdd_sm2,vin_ldo*";
+                                        regulator-min-microvolt = <3700000>;
+                                        regulator-max-microvolt = <3700000>;
+                                        regulator-always-on;
+                                };
+                                /* LDO0 is not connected to anything */
+                                regulator@5 {
+                                        reg = <5>;
+                                        regulator-compatible = "ldo1";
+                                        regulator-name = "vdd_ldo1,avdd_pll*";
+                                        regulator-min-microvolt = <1100000>;
+                                        regulator-max-microvolt = <1100000>;
+                                        regulator-always-on;
+                                };
+                                regulator@6 {
+                                        reg = <6>;
+                                        regulator-compatible = "ldo2";
+                                        regulator-name = "vdd_ldo2,vdd_rtc";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                };
+                                regulator@7 {
+                                        reg = <7>;
+                                        regulator-compatible = "ldo3";
+                                        regulator-name = "vdd_ldo3,avdd_usb*";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                                regulator@8 {
+                                        reg = <8>;
+                                        regulator-compatible = "ldo4";
+                                        regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@9 {
+                                        reg = <9>;
+                                        regulator-compatible = "ldo5";
+                                        regulator-name = "vdd_ldo5,vcore_mmc";
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                        regulator-always-on;
+                                };
+                                regulator@10 {
+                                        reg = <10>;
+                                        regulator-compatible = "ldo6";
+                                        regulator-name = "vdd_ldo6,avdd_vdac";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@11 {
+                                        reg = <11>;
+                                        regulator-compatible = "ldo7";
+                                        regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                };
+                                regulator@12 {
+                                        reg = <12>;
+                                        regulator-compatible = "ldo8";
+                                        regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@13 {
+                                        reg = <13>;
+                                        regulator-compatible = "ldo9";
+                                        regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+                                        regulator-min-microvolt = <2850000>;
+                                        regulator-max-microvolt = <2850000>;
+                                        regulator-always-on;
+                                };
+                                regulator@14 {
+                                        reg = <14>;
+                                        regulator-compatible = "ldo_rtc";
+                                        regulator-name = "vdd_rtc_out,vdd_cell";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                        };
+                };
+        };
+        pmc {
+                nvidia,invert-interrupt;
        };
        usb@c5000000 {
@@ -317,6 +469,60 @@
                bus-width = <8>;
        };
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                vdd_5v0_reg: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "vdd_5v0";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                };
+                regulator@1 {
+                        compatible = "regulator-fixed";
+                        reg = <1>;
+                        regulator-name = "vdd_1v5";
+                        regulator-min-microvolt = <1500000>;
+                        regulator-max-microvolt = <1500000>;
+                        gpio = <&pmic 0 0>;
+                };
+                regulator@2 {
+                        compatible = "regulator-fixed";
+                        reg = <2>;
+                        regulator-name = "vdd_1v2";
+                        regulator-min-microvolt = <1200000>;
+                        regulator-max-microvolt = <1200000>;
+                        gpio = <&pmic 1 0>;
+                        enable-active-high;
+                };
+                regulator@3 {
+                        compatible = "regulator-fixed";
+                        reg = <3>;
+                        regulator-name = "vdd_pnl";
+                        regulator-min-microvolt = <2800000>;
+                        regulator-max-microvolt = <2800000>;
+                        gpio = <&gpio 22 0>; /* gpio PC6 */
+                        enable-active-high;
+                };
+                regulator@4 {
+                        compatible = "regulator-fixed";
+                        reg = <4>;
+                        regulator-name = "vdd_bl";
+                        regulator-min-microvolt = <2800000>;
+                        regulator-max-microvolt = <2800000>;
+                        gpio = <&gpio 176 0>; /* gpio PW0 */
+                        enable-active-high;
+                };
+        };
        sound {
                compatible = "nvidia,tegra-audio-wm8903-ventana",
                             "nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 6916310bf58f..c636d002d6d8 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -261,6 +261,286 @@
                        gpio-controller;
                        #gpio-cells = <2>;
                };
+                max8907@3c {
+                        compatible = "maxim,max8907";
+                        reg = <0x3c>;
+                        interrupts = <0 86 0x4>;
+                        maxim,system-power-controller;
+                        mbatt-supply = <&usb0_vbus_reg>;
+                        in-v1-supply = <&mbatt_reg>;
+                        in-v2-supply = <&mbatt_reg>;
+                        in-v3-supply = <&mbatt_reg>;
+                        in1-supply = <&mbatt_reg>;
+                        in2-supply = <&nvvdd_sv3_reg>;
+                        in3-supply = <&mbatt_reg>;
+                        in4-supply = <&mbatt_reg>;
+                        in5-supply = <&mbatt_reg>;
+                        in6-supply = <&mbatt_reg>;
+                        in7-supply = <&mbatt_reg>;
+                        in8-supply = <&mbatt_reg>;
+                        in9-supply = <&mbatt_reg>;
+                        in10-supply = <&mbatt_reg>;
+                        in11-supply = <&mbatt_reg>;
+                        in12-supply = <&mbatt_reg>;
+                        in13-supply = <&mbatt_reg>;
+                        in14-supply = <&mbatt_reg>;
+                        in15-supply = <&mbatt_reg>;
+                        in16-supply = <&mbatt_reg>;
+                        in17-supply = <&nvvdd_sv3_reg>;
+                        in18-supply = <&nvvdd_sv3_reg>;
+                        in19-supply = <&mbatt_reg>;
+                        in20-supply = <&mbatt_reg>;
+                        regulators {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                mbatt_reg: regulator@0 {
+                                        reg = <0>;
+                                        regulator-compatible = "mbatt";
+                                        regulator-name = "vbat_pmu";
+                                        regulator-always-on;
+                                };
+                                regulator@1 {
+                                        reg = <1>;
+                                        regulator-compatible = "sd1";
+                                        regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+                                        regulator-min-microvolt = <1000000>;
+                                        regulator-max-microvolt = <1000000>;
+                                        regulator-always-on;
+                                };
+                                regulator@2 {
+                                        reg = <2>;
+                                        regulator-compatible = "sd2";
+                                        regulator-name = "nvvdd_sv2,vdd_core";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                nvvdd_sv3_reg: regulator@3 {
+                                        reg = <3>;
+                                        regulator-compatible = "sd3";
+                                        regulator-name = "nvvdd_sv3";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@4 {
+                                        reg = <4>;
+                                        regulator-compatible = "ldo1";
+                                        regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                                regulator@5 {
+                                        reg = <5>;
+                                        regulator-compatible = "ldo2";
+                                        regulator-name = "nvvdd_ldo2,avdd_pll*";
+                                        regulator-min-microvolt = <1100000>;
+                                        regulator-max-microvolt = <1100000>;
+                                        regulator-always-on;
+                                };
+                                regulator@6 {
+                                        reg = <6>;
+                                        regulator-compatible = "ldo3";
+                                        regulator-name = "nvvdd_ldo3,vcom_1v8b";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@7 {
+                                        reg = <7>;
+                                        regulator-compatible = "ldo4";
+                                        regulator-name = "nvvdd_ldo4,avdd_usb*";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                                regulator@8 {
+                                        reg = <8>;
+                                        regulator-compatible = "ldo5";
+                                        regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+                                        regulator-min-microvolt = <2800000>;
+                                        regulator-max-microvolt = <2800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@9 {
+                                        reg = <9>;
+                                        regulator-compatible = "ldo6";
+                                        regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@10 {
+                                        reg = <10>;
+                                        regulator-compatible = "ldo7";
+                                        regulator-name = "nvvdd_ldo7,avddio_audio";
+                                        regulator-min-microvolt = <2800000>;
+                                        regulator-max-microvolt = <2800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@11 {
+                                        reg = <11>;
+                                        regulator-compatible = "ldo8";
+                                        regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+                                        regulator-min-microvolt = <3000000>;
+                                        regulator-max-microvolt = <3000000>;
+                                };
+                                regulator@12 {
+                                        reg = <12>;
+                                        regulator-compatible = "ldo9";
+                                        regulator-name = "nvvdd_ldo9,avdd_cam*";
+                                        regulator-min-microvolt = <2800000>;
+                                        regulator-max-microvolt = <2800000>;
+                                };
+                                regulator@13 {
+                                        reg = <13>;
+                                        regulator-compatible = "ldo10";
+                                        regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+                                        regulator-min-microvolt = <3000000>;
+                                        regulator-max-microvolt = <3000000>;
+                                        regulator-always-on;
+                                };
+                                regulator@14 {
+                                        reg = <14>;
+                                        regulator-compatible = "ldo11";
+                                        regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                };
+                                regulator@15 {
+                                        reg = <15>;
+                                        regulator-compatible = "ldo12";
+                                        regulator-name = "nvvdd_ldo12,vddio_sdio";
+                                        regulator-min-microvolt = <2800000>;
+                                        regulator-max-microvolt = <2800000>;
+                                        regulator-always-on;
+                                };
+                                regulator@16 {
+                                        reg = <16>;
+                                        regulator-compatible = "ldo13";
+                                        regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+                                        regulator-min-microvolt = <2800000>;
+                                        regulator-max-microvolt = <2800000>;
+                                };
+                                regulator@17 {
+                                        reg = <17>;
+                                        regulator-compatible = "ldo14";
+                                        regulator-name = "nvvdd_ldo14,avdd_vdac";
+                                        regulator-min-microvolt = <2800000>;
+                                        regulator-max-microvolt = <2800000>;
+                                };
+                                regulator@18 {
+                                        reg = <18>;
+                                        regulator-compatible = "ldo15";
+                                        regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                };
+                                regulator@19 {
+                                        reg = <19>;
+                                        regulator-compatible = "ldo16";
+                                        regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+                                        regulator-min-microvolt = <1300000>;
+                                        regulator-max-microvolt = <1300000>;
+                                };
+                                regulator@20 {
+                                        reg = <20>;
+                                        regulator-compatible = "ldo17";
+                                        regulator-name = "nvvdd_ldo17,vddio_mipi";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                };
+                                regulator@21 {
+                                        reg = <21>;
+                                        regulator-compatible = "ldo18";
+                                        regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                };
+                                regulator@22 {
+                                        reg = <22>;
+                                        regulator-compatible = "ldo19";
+                                        regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+                                        regulator-min-microvolt = <2800000>;
+                                        regulator-max-microvolt = <2800000>;
+                                };
+                                regulator@23 {
+                                        reg = <23>;
+                                        regulator-compatible = "ldo20";
+                                        regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                regulator@24 {
+                                        reg = <24>;
+                                        regulator-compatible = "out5v";
+                                        regulator-name = "usb0_vbus_reg";
+                                };
+                                regulator@25 {
+                                        reg = <25>;
+                                        regulator-compatible = "out33v";
+                                        regulator-name = "pmu_out3v3";
+                                };
+                                regulator@26 {
+                                        reg = <26>;
+                                        regulator-compatible = "bbat";
+                                        regulator-name = "pmu_bbat";
+                                        regulator-min-microvolt = <2400000>;
+                                        regulator-max-microvolt = <2400000>;
+                                        regulator-always-on;
+                                };
+                                regulator@27 {
+                                        reg = <27>;
+                                        regulator-compatible = "sdby";
+                                        regulator-name = "vdd_aon";
+                                        regulator-always-on;
+                                };
+                                regulator@28 {
+                                        reg = <28>;
+                                        regulator-compatible = "vrtc";
+                                        regulator-name = "vrtc,pmu_vccadc";
+                                        regulator-always-on;
+                                };
+                        };
+                };
+        };
+        pmc {
+                nvidia,invert-interrupt;
        };
        usb@c5000000 {
@@ -284,6 +564,21 @@
                bus-width = <8>;
        };
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                usb0_vbus_reg: regulator {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "usb0_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                };
+        };
        sound {
                compatible = "nvidia,tegra-audio-wm8753-whistler",
                             "nvidia,tegra-audio-wm8753";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 405d1673904e..67a6cd910b96 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -123,7 +123,7 @@
                status = "disabled";
        };
-        pwm {
+        pwm: pwm {
                compatible = "nvidia,tegra20-pwm";
                reg = <0x7000a000 0x100>;
                #pwm-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
new file mode 100644
index 000000000000..dd4222f00eca
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+/include/ "tegra30-cardhu.dtsi"
+/* This dts file support the cardhu A02 version of board */
+/ {
+        model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+        compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                ddr_reg: regulator@100 {
+                        compatible = "regulator-fixed";
+                        reg = <100>;
+                        regulator-name = "vdd_ddr";
+                        regulator-min-microvolt = <1500000>;
+                        regulator-max-microvolt = <1500000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&pmic 6 0>;
+                };
+                sys_3v3_reg: regulator@101 {
+                        compatible = "regulator-fixed";
+                        reg = <101>;
+                        regulator-name = "sys_3v3";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&pmic 7 0>;
+                };
+                usb1_vbus_reg: regulator@102 {
+                        compatible = "regulator-fixed";
+                        reg = <102>;
+                        regulator-name = "usb1_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        gpio = <&gpio 68 0>; /* GPIO PI4 */
+                        gpio-open-drain;
+                        vin-supply = <&vdd_5v0_reg>;
+                };
+                usb3_vbus_reg: regulator@103 {
+                        compatible = "regulator-fixed";
+                        reg = <103>;
+                        regulator-name = "usb3_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        gpio = <&gpio 63 0>; /* GPIO PH7 */
+                        gpio-open-drain;
+                        vin-supply = <&vdd_5v0_reg>;
+                };
+                vdd_5v0_reg: regulator@104 {
+                        compatible = "regulator-fixed";
+                        reg = <104>;
+                        regulator-name = "5v0";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        gpio = <&pmic 2 0>;
+                };
+                vdd_bl_reg: regulator@105 {
+                        compatible = "regulator-fixed";
+                        reg = <105>;
+                        regulator-name = "vdd_bl";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&gpio 83 0>; /* GPIO PK3 */
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
new file mode 100644
index 000000000000..0828f097ca86
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -0,0 +1,98 @@
+/dts-v1/;
+/include/ "tegra30-cardhu.dtsi"
+/* This dts file support the cardhu A04 and later versions of board */
+/ {
+        model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+        compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                ddr_reg: regulator@100 {
+                        compatible = "regulator-fixed";
+                        regulator-name = "ddr";
+                        reg = <100>;
+                        regulator-min-microvolt = <1500000>;
+                        regulator-max-microvolt = <1500000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&pmic 7 0>;
+                };
+                sys_3v3_reg: regulator@101 {
+                        compatible = "regulator-fixed";
+                        reg = <101>;
+                        regulator-name = "sys_3v3";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&pmic 6 0>;
+                };
+                usb1_vbus_reg: regulator@102 {
+                        compatible = "regulator-fixed";
+                        reg = <102>;
+                        regulator-name = "usb1_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        gpio = <&gpio 238 0>; /* GPIO PDD6 */
+                        gpio-open-drain;
+                        vin-supply = <&vdd_5v0_reg>;
+                };
+                usb3_vbus_reg: regulator@103 {
+                        compatible = "regulator-fixed";
+                        reg = <103>;
+                        regulator-name = "usb3_vbus";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        gpio = <&gpio 236 0>; /* GPIO PDD4 */
+                        gpio-open-drain;
+                        vin-supply = <&vdd_5v0_reg>;
+                };
+                vdd_5v0_reg: regulator@104 {
+                        compatible = "regulator-fixed";
+                        reg = <104>;
+                        regulator-name = "5v0";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        gpio = <&pmic 8 0>;
+                };
+                vdd_bl_reg: regulator@105 {
+                        compatible = "regulator-fixed";
+                        reg = <105>;
+                        regulator-name = "vdd_bl";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&gpio 234 0>; /* GPIO PDD2 */
+                };
+                vdd_bl2_reg: regulator@106 {
+                        compatible = "regulator-fixed";
+                        reg = <106>;
+                        regulator-name = "vdd_bl2";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&gpio 232 0>; /* GPIO PDD0 */
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts
deleted file mode 100644
index c169bced131e..000000000000
--- a/arch/arm/boot/dts/tegra30-cardhu.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-/include/ "tegra30.dtsi"
-/ {
-        model = "NVIDIA Tegra30 Cardhu evaluation board";
-        compatible = "nvidia,cardhu", "nvidia,tegra30";
-        memory {
-                reg = <0x80000000 0x40000000>;
-        };
-        pinmux {
-                pinctrl-names = "default";
-                pinctrl-0 = <&state_default>;
-                state_default: pinmux {
-                        sdmmc1_clk_pz0 {
-                                nvidia,pins = "sdmmc1_clk_pz0";
-                                nvidia,function = "sdmmc1";
-                                nvidia,pull = <0>;
-                                nvidia,tristate = <0>;
-                        };
-                        sdmmc1_cmd_pz1 {
-                                nvidia,pins =   "sdmmc1_cmd_pz1",
-                                                "sdmmc1_dat0_py7",
-                                                "sdmmc1_dat1_py6",
-                                                "sdmmc1_dat2_py5",
-                                                "sdmmc1_dat3_py4";
-                                nvidia,function = "sdmmc1";
-                                nvidia,pull = <2>;
-                                nvidia,tristate = <0>;
-                        };
-                        sdmmc4_clk_pcc4 {
-                                nvidia,pins =   "sdmmc4_clk_pcc4",
-                                                "sdmmc4_rst_n_pcc3";
-                                nvidia,function = "sdmmc4";
-                                nvidia,pull = <0>;
-                                nvidia,tristate = <0>;
-                        };
-                        sdmmc4_dat0_paa0 {
-                                nvidia,pins =   "sdmmc4_dat0_paa0",
-                                                "sdmmc4_dat1_paa1",
-                                                "sdmmc4_dat2_paa2",
-                                                "sdmmc4_dat3_paa3",
-                                                "sdmmc4_dat4_paa4",
-                                                "sdmmc4_dat5_paa5",
-                                                "sdmmc4_dat6_paa6",
-                                                "sdmmc4_dat7_paa7";
-                                nvidia,function = "sdmmc4";
-                                nvidia,pull = <2>;
-                                nvidia,tristate = <0>;
-                        };
-                        dap2_fs_pa2 {
-                                nvidia,pins =   "dap2_fs_pa2",
-                                                "dap2_sclk_pa3",
-                                                "dap2_din_pa4",
-                                                "dap2_dout_pa5";
-                                nvidia,function = "i2s1";
-                                nvidia,pull = <0>;
-                                nvidia,tristate = <0>;
-                        };
-                };
-        };
-        serial@70006000 {
-                status = "okay";
-                clock-frequency = <408000000>;
-        };
-        i2c@7000c000 {
-                status = "okay";
-                clock-frequency = <100000>;
-        };
-        i2c@7000c400 {
-                status = "okay";
-                clock-frequency = <100000>;
-        };
-        i2c@7000c500 {
-                status = "okay";
-                clock-frequency = <100000>;
-                /* ALS and Proximity sensor */
-                isl29028@44 {
-                        compatible = "isil,isl29028";
-                        reg = <0x44>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <88 0x04>; /*gpio PL0 */
-                };
-        };
-        i2c@7000c700 {
-                status = "okay";
-                clock-frequency = <100000>;
-        };
-        i2c@7000d000 {
-                status = "okay";
-                clock-frequency = <100000>;
-                wm8903: wm8903@1a {
-                        compatible = "wlf,wm8903";
-                        reg = <0x1a>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <179 0x04>; /* gpio PW3 */
-                        gpio-controller;
-                        #gpio-cells = <2>;
-                        micdet-cfg = <0>;
-                        micdet-delay = <100>;
-                        gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-                };
-                tps62361 {
-                        compatible = "ti,tps62361";
-                        reg = <0x60>;
-                        regulator-name = "tps62361-vout";
-                        regulator-min-microvolt = <500000>;
-                        regulator-max-microvolt = <1500000>;
-                        regulator-boot-on;
-                        regulator-always-on;
-                        ti,vsel0-state-high;
-                        ti,vsel1-state-high;
-                };
-        };
-        ahub {
-                i2s@70080400 {
-                        status = "okay";
-                };
-        };
-        sdhci@78000000 {
-                status = "okay";
-                cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-                wp-gpios = <&gpio 155 0>; /* gpio PT3 */
-                power-gpios = <&gpio 31 0>; /* gpio PD7 */
-                bus-width = <4>;
-        };
-        sdhci@78000600 {
-                status = "okay";
-                bus-width = <8>;
-        };
-        sound {
-                compatible = "nvidia,tegra-audio-wm8903-cardhu",
-                             "nvidia,tegra-audio-wm8903";
-                nvidia,model = "NVIDIA Tegra Cardhu";
-                nvidia,audio-routing =
-                        "Headphone Jack", "HPOUTR",
-                        "Headphone Jack", "HPOUTL",
-                        "Int Spk", "ROP",
-                        "Int Spk", "RON",
-                        "Int Spk", "LOP",
-                        "Int Spk", "LON",
-                        "Mic Jack", "MICBIAS",
-                        "IN1L", "Mic Jack";
-                nvidia,i2s-controller = <&tegra_i2s1>;
-                nvidia,audio-codec = <&wm8903>;
-                nvidia,spkr-en-gpios = <&wm8903 2 0>;
-                nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-        };
-};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
new file mode 100644
index 000000000000..d10c9c5a3606
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -0,0 +1,475 @@
+/include/ "tegra30.dtsi"
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+/ {
+        model = "NVIDIA Tegra30 Cardhu evaluation board";
+        compatible = "nvidia,cardhu", "nvidia,tegra30";
+        memory {
+                reg = <0x80000000 0x40000000>;
+        };
+        pinmux {
+                pinctrl-names = "default";
+                pinctrl-0 = <&state_default>;
+                state_default: pinmux {
+                        sdmmc1_clk_pz0 {
+                                nvidia,pins = "sdmmc1_clk_pz0";
+                                nvidia,function = "sdmmc1";
+                                nvidia,pull = <0>;
+                                nvidia,tristate = <0>;
+                        };
+                        sdmmc1_cmd_pz1 {
+                                nvidia,pins =   "sdmmc1_cmd_pz1",
+                                                "sdmmc1_dat0_py7",
+                                                "sdmmc1_dat1_py6",
+                                                "sdmmc1_dat2_py5",
+                                                "sdmmc1_dat3_py4";
+                                nvidia,function = "sdmmc1";
+                                nvidia,pull = <2>;
+                                nvidia,tristate = <0>;
+                        };
+                        sdmmc4_clk_pcc4 {
+                                nvidia,pins =   "sdmmc4_clk_pcc4",
+                                                "sdmmc4_rst_n_pcc3";
+                                nvidia,function = "sdmmc4";
+                                nvidia,pull = <0>;
+                                nvidia,tristate = <0>;
+                        };
+                        sdmmc4_dat0_paa0 {
+                                nvidia,pins =   "sdmmc4_dat0_paa0",
+                                                "sdmmc4_dat1_paa1",
+                                                "sdmmc4_dat2_paa2",
+                                                "sdmmc4_dat3_paa3",
+                                                "sdmmc4_dat4_paa4",
+                                                "sdmmc4_dat5_paa5",
+                                                "sdmmc4_dat6_paa6",
+                                                "sdmmc4_dat7_paa7";
+                                nvidia,function = "sdmmc4";
+                                nvidia,pull = <2>;
+                                nvidia,tristate = <0>;
+                        };
+                        dap2_fs_pa2 {
+                                nvidia,pins =   "dap2_fs_pa2",
+                                                "dap2_sclk_pa3",
+                                                "dap2_din_pa4",
+                                                "dap2_dout_pa5";
+                                nvidia,function = "i2s1";
+                                nvidia,pull = <0>;
+                                nvidia,tristate = <0>;
+                        };
+                };
+        };
+        serial@70006000 {
+                status = "okay";
+                clock-frequency = <408000000>;
+        };
+        i2c@7000c000 {
+                status = "okay";
+                clock-frequency = <100000>;
+        };
+        i2c@7000c400 {
+                status = "okay";
+                clock-frequency = <100000>;
+        };
+        i2c@7000c500 {
+                status = "okay";
+                clock-frequency = <100000>;
+                /* ALS and Proximity sensor */
+                isl29028@44 {
+                        compatible = "isil,isl29028";
+                        reg = <0x44>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <88 0x04>; /*gpio PL0 */
+                };
+        };
+        i2c@7000c700 {
+                status = "okay";
+                clock-frequency = <100000>;
+        };
+        i2c@7000d000 {
+                status = "okay";
+                clock-frequency = <100000>;
+                wm8903: wm8903@1a {
+                        compatible = "wlf,wm8903";
+                        reg = <0x1a>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <179 0x04>; /* gpio PW3 */
+                        gpio-controller;
+                        #gpio-cells = <2>;
+                        micdet-cfg = <0>;
+                        micdet-delay = <100>;
+                        gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+                };
+                tps62361 {
+                        compatible = "ti,tps62361";
+                        reg = <0x60>;
+                        regulator-name = "tps62361-vout";
+                        regulator-min-microvolt = <500000>;
+                        regulator-max-microvolt = <1500000>;
+                        regulator-boot-on;
+                        regulator-always-on;
+                        ti,vsel0-state-high;
+                        ti,vsel1-state-high;
+                };
+                pmic: tps65911@2d {
+                        compatible = "ti,tps65911";
+                        reg = <0x2d>;
+                        interrupts = <0 86 0x4>;
+                        #interrupt-cells = <2>;
+                        interrupt-controller;
+                        ti,system-power-controller;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        vcc1-supply = <&vdd_ac_bat_reg>;
+                        vcc2-supply = <&vdd_ac_bat_reg>;
+                        vcc3-supply = <&vio_reg>;
+                        vcc4-supply = <&vdd_5v0_reg>;
+                        vcc5-supply = <&vdd_ac_bat_reg>;
+                        vcc6-supply = <&vdd2_reg>;
+                        vcc7-supply = <&vdd_ac_bat_reg>;
+                        vccio-supply = <&vdd_ac_bat_reg>;
+                        regulators {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                vdd1_reg: regulator@0 {
+                                        reg = <0>;
+                                        regulator-compatible = "vdd1";
+                                        regulator-name = "vddio_ddr_1v2";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                vdd2_reg: regulator@1 {
+                                        reg = <1>;
+                                        regulator-compatible = "vdd2";
+                                        regulator-name = "vdd_1v5_gen";
+                                        regulator-min-microvolt = <1500000>;
+                                        regulator-max-microvolt = <1500000>;
+                                        regulator-always-on;
+                                };
+                                vddctrl_reg: regulator@2 {
+                                        reg = <2>;
+                                        regulator-compatible = "vddctrl";
+                                        regulator-name = "vdd_cpu,vdd_sys";
+                                        regulator-min-microvolt = <1000000>;
+                                        regulator-max-microvolt = <1000000>;
+                                        regulator-always-on;
+                                };
+                                vio_reg: regulator@3 {
+                                        reg = <3>;
+                                        regulator-compatible = "vio";
+                                        regulator-name = "vdd_1v8_gen";
+                                        regulator-min-microvolt = <1800000>;
+                                        regulator-max-microvolt = <1800000>;
+                                        regulator-always-on;
+                                };
+                                ldo1_reg: regulator@4 {
+                                        reg = <4>;
+                                        regulator-compatible = "ldo1";
+                                        regulator-name = "vdd_pexa,vdd_pexb";
+                                        regulator-min-microvolt = <1050000>;
+                                        regulator-max-microvolt = <1050000>;
+                                };
+                                ldo2_reg: regulator@5 {
+                                        reg = <5>;
+                                        regulator-compatible = "ldo2";
+                                        regulator-name = "vdd_sata,avdd_plle";
+                                        regulator-min-microvolt = <1050000>;
+                                        regulator-max-microvolt = <1050000>;
+                                };
+                                /* LDO3 is not connected to anything */
+                                ldo4_reg: regulator@7 {
+                                        reg = <7>;
+                                        regulator-compatible = "ldo4";
+                                        regulator-name = "vdd_rtc";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                ldo5_reg: regulator@8 {
+                                        reg = <8>;
+                                        regulator-compatible = "ldo5";
+                                        regulator-name = "vddio_sdmmc,avdd_vdac";
+                                        regulator-min-microvolt = <3300000>;
+                                        regulator-max-microvolt = <3300000>;
+                                        regulator-always-on;
+                                };
+                                ldo6_reg: regulator@9 {
+                                        reg = <9>;
+                                        regulator-compatible = "ldo6";
+                                        regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                };
+                                ldo7_reg: regulator@10 {
+                                        reg = <10>;
+                                        regulator-compatible = "ldo7";
+                                        regulator-name = "vdd_pllm,x,u,a_p_c_s";
+                                        regulator-min-microvolt = <1200000>;
+                                        regulator-max-microvolt = <1200000>;
+                                        regulator-always-on;
+                                };
+                                ldo8_reg: regulator@11 {
+                                        reg = <11>;
+                                        regulator-compatible = "ldo8";
+                                        regulator-name = "vdd_ddr_hs";
+                                        regulator-min-microvolt = <1000000>;
+                                        regulator-max-microvolt = <1000000>;
+                                        regulator-always-on;
+                                };
+                        };
+                };
+        };
+        ahub {
+                i2s@70080400 {
+                        status = "okay";
+                };
+        };
+        pmc {
+                status = "okay";
+                nvidia,invert-interrupt;
+        };
+        sdhci@78000000 {
+                status = "okay";
+                cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+                wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+                power-gpios = <&gpio 31 0>; /* gpio PD7 */
+                bus-width = <4>;
+        };
+        sdhci@78000600 {
+                status = "okay";
+                bus-width = <8>;
+        };
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                vdd_ac_bat_reg: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "vdd_ac_bat";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-always-on;
+                };
+                cam_1v8_reg: regulator@1 {
+                        compatible = "regulator-fixed";
+                        reg = <1>;
+                        regulator-name = "cam_1v8";
+                        regulator-min-microvolt = <1800000>;
+                        regulator-max-microvolt = <1800000>;
+                        enable-active-high;
+                        gpio = <&gpio 220 0>; /* gpio PBB4 */
+                        vin-supply = <&vio_reg>;
+                };
+                cp_5v_reg: regulator@2 {
+                        compatible = "regulator-fixed";
+                        reg = <2>;
+                        regulator-name = "cp_5v";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        regulator-boot-on;
+                        regulator-always-on;
+                        enable-active-high;
+                        gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+                };
+                emmc_3v3_reg: regulator@3 {
+                        compatible = "regulator-fixed";
+                        reg = <3>;
+                        regulator-name = "emmc_3v3";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&gpio 25 0>; /* gpio PD1 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                modem_3v3_reg: regulator@4 {
+                        compatible = "regulator-fixed";
+                        reg = <4>;
+                        regulator-name = "modem_3v3";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        enable-active-high;
+                        gpio = <&gpio 30 0>; /* gpio PD6 */
+                };
+                pex_hvdd_3v3_reg: regulator@5 {
+                        compatible = "regulator-fixed";
+                        reg = <5>;
+                        regulator-name = "pex_hvdd_3v3";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        enable-active-high;
+                        gpio = <&gpio 95 0>; /* gpio PL7 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                vdd_cam1_ldo_reg: regulator@6 {
+                        compatible = "regulator-fixed";
+                        reg = <6>;
+                        regulator-name = "vdd_cam1_ldo";
+                        regulator-min-microvolt = <2800000>;
+                        regulator-max-microvolt = <2800000>;
+                        enable-active-high;
+                        gpio = <&gpio 142 0>; /* gpio PR6 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                vdd_cam2_ldo_reg: regulator@7 {
+                        compatible = "regulator-fixed";
+                        reg = <7>;
+                        regulator-name = "vdd_cam2_ldo";
+                        regulator-min-microvolt = <2800000>;
+                        regulator-max-microvolt = <2800000>;
+                        enable-active-high;
+                        gpio = <&gpio 143 0>; /* gpio PR7 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                vdd_cam3_ldo_reg: regulator@8 {
+                        compatible = "regulator-fixed";
+                        reg = <8>;
+                        regulator-name = "vdd_cam3_ldo";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        enable-active-high;
+                        gpio = <&gpio 144 0>; /* gpio PS0 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                vdd_com_reg: regulator@9 {
+                        compatible = "regulator-fixed";
+                        reg = <9>;
+                        regulator-name = "vdd_com";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        enable-active-high;
+                        gpio = <&gpio 24 0>; /* gpio PD0 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                vdd_fuse_3v3_reg: regulator@10 {
+                        compatible = "regulator-fixed";
+                        reg = <10>;
+                        regulator-name = "vdd_fuse_3v3";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        enable-active-high;
+                        gpio = <&gpio 94 0>; /* gpio PL6 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                vdd_pnl1_reg: regulator@11 {
+                        compatible = "regulator-fixed";
+                        reg = <11>;
+                        regulator-name = "vdd_pnl1";
+                        regulator-min-microvolt = <3300000>;
+                        regulator-max-microvolt = <3300000>;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        enable-active-high;
+                        gpio = <&gpio 92 0>; /* gpio PL4 */
+                        vin-supply = <&sys_3v3_reg>;
+                };
+                vdd_vid_reg: regulator@12 {
+                        compatible = "regulator-fixed";
+                        reg = <12>;
+                        regulator-name = "vddio_vid";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        gpio = <&gpio 152 0>; /* GPIO PT0 */
+                        gpio-open-drain;
+                        vin-supply = <&vdd_5v0_reg>;
+                };
+        };
+        sound {
+                compatible = "nvidia,tegra-audio-wm8903-cardhu",
+                             "nvidia,tegra-audio-wm8903";
+                nvidia,model = "NVIDIA Tegra Cardhu";
+                nvidia,audio-routing =
+                        "Headphone Jack", "HPOUTR",
+                        "Headphone Jack", "HPOUTL",
+                        "Int Spk", "ROP",
+                        "Int Spk", "RON",
+                        "Int Spk", "LOP",
+                        "Int Spk", "LON",
+                        "Mic Jack", "MICBIAS",
+                        "IN1L", "Mic Jack";
+                nvidia,i2s-controller = <&tegra_i2s1>;
+                nvidia,audio-codec = <&wm8903>;
+                nvidia,spkr-en-gpios = <&wm8903 2 0>;
+                nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+        };
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 3e4334d14efb..b1497c7d7d68 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -117,7 +117,7 @@
                status = "disabled";
        };
-        pwm {
+        pwm: pwm {
                compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
                reg = <0x7000a000 0x100>;
                #pwm-cells = <2>;
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
new file mode 100644
index 000000000000..a63272422d76
--- /dev/null
+++ b/arch/arm/boot/dts/tps65217.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+&tps {
+        compatible = "ti,tps65217";
+        regulators {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                dcdc1_reg: regulator@0 {
+                        reg = <0>;
+                        regulator-compatible = "dcdc1";
+                };
+                dcdc2_reg: regulator@1 {
+                        reg = <1>;
+                        regulator-compatible = "dcdc2";
+                };
+                dcdc3_reg: regulator@2 {
+                        reg = <2>;
+                        regulator-compatible = "dcdc3";
+                };
+                ldo1_reg: regulator@3 {
+                        reg = <3>;
+                        regulator-compatible = "ldo1";
+                };
+                ldo2_reg: regulator@4 {
+                        reg = <4>;
+                        regulator-compatible = "ldo2";
+                };
+                ldo3_reg: regulator@5 {
+                        reg = <5>;
+                        regulator-compatible = "ldo3";
+                };
+                ldo4_reg: regulator@6 {
+                        reg = <6>;
+                        regulator-compatible = "ldo4";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi
new file mode 100644
index 000000000000..92693a89160e
--- /dev/null
+++ b/arch/arm/boot/dts/tps65910.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+&tps {
+        compatible = "ti,tps65910";
+        regulators {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                vrtc_reg: regulator@0 {
+                        reg = <0>;
+                        regulator-compatible = "vrtc";
+                };
+                vio_reg: regulator@1 {
+                        reg = <1>;
+                        regulator-compatible = "vio";
+                };
+                vdd1_reg: regulator@2 {
+                        reg = <2>;
+                        regulator-compatible = "vdd1";
+                };
+                vdd2_reg: regulator@3 {
+                        reg = <3>;
+                        regulator-compatible = "vdd2";
+                };
+                vdd3_reg: regulator@4 {
+                        reg = <4>;
+                        regulator-compatible = "vdd3";
+                };
+                vdig1_reg: regulator@5 {
+                        reg = <5>;
+                        regulator-compatible = "vdig1";
+                };
+                vdig2_reg: regulator@6 {
+                        reg = <6>;
+                        regulator-compatible = "vdig2";
+                };
+                vpll_reg: regulator@7 {
+                        reg = <7>;
+                        regulator-compatible = "vpll";
+                };
+                vdac_reg: regulator@8 {
+                        reg = <8>;
+                        regulator-compatible = "vdac";
+                };
+                vaux1_reg: regulator@9 {
+                        reg = <9>;
+                        regulator-compatible = "vaux1";
+                };
+                vaux2_reg: regulator@10 {
+                        reg = <10>;
+                        regulator-compatible = "vaux2";
+                };
+                vaux33_reg: regulator@11 {
+                        reg = <11>;
+                        regulator-compatible = "vaux33";
+                };
+                vmmc_reg: regulator@12 {
+                        reg = <12>;
+                        regulator-compatible = "vmmc";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 22f4d1394ed3..ff000172c93c 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -19,19 +19,19 @@
                interrupts = <11>;
        };
-        vdac: regulator@0 {
+        vdac: regulator-vdac {
                compatible = "ti,twl4030-vdac";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <1800000>;
        };
-        vpll2: regulator@1 {
+        vpll2: regulator-vpll2 {
                compatible = "ti,twl4030-vpll2";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <1800000>;
        };
-        vmmc1: regulator@2 {
+        vmmc1: regulator-vmmc1 {
                compatible = "ti,twl4030-vmmc1";
                regulator-min-microvolt = <1850000>;
                regulator-max-microvolt = <3150000>;
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index d351b27d7213..123e2c40218a 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -20,70 +20,70 @@
                interrupts = <11>;
        };
-        vaux1: regulator@0 {
+        vaux1: regulator-vaux1 {
                compatible = "ti,twl6030-vaux1";
                regulator-min-microvolt = <1000000>;
                regulator-max-microvolt = <3000000>;
        };
-        vaux2: regulator@1 {
+        vaux2: regulator-vaux2 {
                compatible = "ti,twl6030-vaux2";
                regulator-min-microvolt = <1200000>;
                regulator-max-microvolt = <2800000>;
        };
-        vaux3: regulator@2 {
+        vaux3: regulator-vaux3 {
                compatible = "ti,twl6030-vaux3";
                regulator-min-microvolt = <1000000>;
                regulator-max-microvolt = <3000000>;
        };
-        vmmc: regulator@3 {
+        vmmc: regulator-vmmc {
                compatible = "ti,twl6030-vmmc";
                regulator-min-microvolt = <1200000>;
                regulator-max-microvolt = <3000000>;
        };
-        vpp: regulator@4 {
+        vpp: regulator-vpp {
                compatible = "ti,twl6030-vpp";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <2500000>;
        };
-        vusim: regulator@5 {
+        vusim: regulator-vusim {
                compatible = "ti,twl6030-vusim";
                regulator-min-microvolt = <1200000>;
                regulator-max-microvolt = <2900000>;
        };
-        vdac: regulator@6 {
+        vdac: regulator-vdac {
                compatible = "ti,twl6030-vdac";
        };
-        vana: regulator@7 {
+        vana: regulator-vana {
                compatible = "ti,twl6030-vana";
        };
-        vcxio: regulator@8 {
+        vcxio: regulator-vcxio {
                compatible = "ti,twl6030-vcxio";
                regulator-always-on;
        };
-        vusb: regulator@9 {
+        vusb: regulator-vusb {
                compatible = "ti,twl6030-vusb";
        };
-        v1v8: regulator@10 {
+        v1v8: regulator-v1v8 {
                compatible = "ti,twl6030-v1v8";
                regulator-always-on;
        };
-        v2v1: regulator@11 {
+        v2v1: regulator-v2v1 {
                compatible = "ti,twl6030-v2v1";
                regulator-always-on;
        };
-        clk32kg: regulator@12 {
+        clk32kg: regulator-clk32kg {
                compatible = "ti,twl6030-clk32kg";
        };
 };
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3c9f32f9b6b4..565132d02105 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,9 +32,7 @@ CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_MX51_EFIKAMX=y
+CONFIG_SOC_IMX53=y
-CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_IMX53_DT=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_SMP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 4edcfb4e4dee..36d60dda310c 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -23,12 +23,6 @@ CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXS=y
 CONFIG_MACH_MXS_DT=y
-CONFIG_MACH_MX23EVK=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_MACH_STMP378X_DEVB=y
-CONFIG_MACH_TX28=y
-CONFIG_MACH_M28EVK=y
-CONFIG_MACH_APX4DEVKIT=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index e58edc36b406..62303043db9c 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -123,6 +123,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_TWL4030=y
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
index 538f17ca905b..295e2e40151b 100644
--- a/arch/arm/include/asm/hardware/cache-tauros2.h
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -8,4 +8,7 @@
 * warranty of any kind, whether express or implied.
 */
-extern void __init tauros2_init(void);
+#define CACHE_TAUROS2_PREFETCH_ON       (1 << 0)
+#define CACHE_TAUROS2_LINEFILL_BURST8   (1 << 1)
+extern void __init tauros2_init(unsigned int features);
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index cc4c6a5a357c..bd54d7b7ef85 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -279,7 +279,7 @@ void __init dove_init(void)
        printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 #ifdef CONFIG_CACHE_TAUROS2
-        tauros2_init();
+        tauros2_init(0);
 #endif
        dove_setup_cpu_mbus();
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index afd542ad6f97..7ca5fe45945f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -101,13 +101,8 @@ config	SOC_IMX51
        select SOC_IMX5
        select ARCH_MX5
        select ARCH_MX51
+        select PINCTRL
-config  SOC_IMX53
+        select PINCTRL_IMX51
-        bool
-        select SOC_IMX5
-        select ARCH_MX5
-        select ARCH_MX53
-        select HAVE_CAN_FLEXCAN if CAN
 if ARCH_IMX_V4_V5
@@ -561,7 +556,6 @@ config MACH_BUG
 config MACH_IMX31_DT
        bool "Support i.MX31 platforms from device tree"
        select SOC_IMX31
-        select USE_OF
        help
          Include support for Freescale i.MX31 based platforms
          using the device tree for discovery.
@@ -737,95 +731,19 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD
 endchoice
-config MX51_EFIKA_COMMON
+comment "Device tree only"
-        bool
-        select SOC_IMX51
-        select IMX_HAVE_PLATFORM_IMX_UART
-        select IMX_HAVE_PLATFORM_MXC_EHCI
-        select IMX_HAVE_PLATFORM_PATA_IMX
-        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-        select IMX_HAVE_PLATFORM_SPI_IMX
-        select MXC_ULPI if USB_ULPI
-config MACH_MX51_EFIKAMX
-        bool "Support MX51 Genesi Efika MX nettop"
-        select LEDS_GPIO_REGISTER
-        select MX51_EFIKA_COMMON
-        help
-          Include support for Genesi Efika MX nettop. This includes specific
-          configurations for the board and its peripherals.
-config MACH_MX51_EFIKASB
-        bool "Support MX51 Genesi Efika Smartbook"
-        select LEDS_GPIO_REGISTER
-        select MX51_EFIKA_COMMON
-        help
-          Include support for Genesi Efika Smartbook. This includes specific
-          configurations for the board and its peripherals.
-comment "i.MX53 machines:"
-config MACH_IMX53_DT
-        bool "Support i.MX53 platforms from device tree"
-        select SOC_IMX53
-        select MACH_MX53_ARD
-        select MACH_MX53_EVK
-        select MACH_MX53_LOCO
-        select MACH_MX53_SMD
-        help
-          Include support for Freescale i.MX53 based platforms
-          using the device tree for discovery
-config MACH_MX53_EVK
-        bool "Support MX53 EVK platforms"
-        select SOC_IMX53
-        select IMX_HAVE_PLATFORM_IMX2_WDT
-        select IMX_HAVE_PLATFORM_IMX_UART
-        select IMX_HAVE_PLATFORM_IMX_I2C
-        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-        select IMX_HAVE_PLATFORM_SPI_IMX
-        select LEDS_GPIO_REGISTER
-        help
-          Include support for MX53 EVK platform. This includes specific
-          configurations for the board and its peripherals.
-config MACH_MX53_SMD
-        bool "Support MX53 SMD platforms"
-        select SOC_IMX53
-        select IMX_HAVE_PLATFORM_IMX2_WDT
-        select IMX_HAVE_PLATFORM_IMX_I2C
-        select IMX_HAVE_PLATFORM_IMX_UART
-        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-        help
-          Include support for MX53 SMD platform. This includes specific
-          configurations for the board and its peripherals.
-config MACH_MX53_LOCO
+config  SOC_IMX53
-        bool "Support MX53 LOCO platforms"
+        bool "i.MX53 support"
-        select SOC_IMX53
+        select SOC_IMX5
-        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select ARCH_MX5
-        select IMX_HAVE_PLATFORM_IMX_I2C
+        select ARCH_MX53
-        select IMX_HAVE_PLATFORM_IMX_UART
+        select HAVE_CAN_FLEXCAN if CAN
-        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        select PINCTRL
-        select IMX_HAVE_PLATFORM_GPIO_KEYS
+        select PINCTRL_IMX53
-        select LEDS_GPIO_REGISTER
-        help
-          Include support for MX53 LOCO platform. This includes specific
-          configurations for the board and its peripherals.
-config MACH_MX53_ARD
-        bool "Support MX53 ARD platforms"
-        select SOC_IMX53
-        select IMX_HAVE_PLATFORM_IMX2_WDT
-        select IMX_HAVE_PLATFORM_IMX_I2C
-        select IMX_HAVE_PLATFORM_IMX_UART
-        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-        select IMX_HAVE_PLATFORM_GPIO_KEYS
        help
-          Include support for MX53 ARD platform. This includes specific
+          This enables support for Freescale i.MX53 processor.
-          configurations for the board and its peripherals.
-comment "i.MX6 family:"
 config SOC_IMX6Q
        bool "i.MX6 Quad support"
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d1204198ca83..895754aeb4f3 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -83,16 +83,9 @@ endif
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
 obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 05541cf4a878..c60967629e27 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -39,8 +39,12 @@ params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
 dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
-                               imx53-qsb.dtb imx53-smd.dtb
+dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \
+                           imx53-evk.dtb \
+                           imx53-qsb.dtb \
+                           imx53-smd.dtb \
 dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
                           imx6q-sabrelite.dtb \
                           imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4233d9e3531d..3ec242f3341e 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -157,6 +157,7 @@ enum mx6q_clks {
 };
 static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
 static enum mx6q_clks const clks_init_on[] __initconst = {
        mmdc_ch0_axi, rom,
@@ -394,52 +395,24 @@ int __init mx6q_clocks_init(void)
                        pr_err("i.MX6q clk %d: register failed with %ld\n",
                                i, PTR_ERR(clk[i]));
+        clk_data.clks = clk;
+        clk_data.clk_num = ARRAY_SIZE(clk);
+        of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
        clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
        clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
        clk_register_clkdev(clk[twd], NULL, "smp_twd");
-        clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh");
-        clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand");
-        clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand");
-        clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand");
-        clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand");
-        clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand");
-        clk_register_clkdev(clk[usboh3], NULL, "2184000.usb");
-        clk_register_clkdev(clk[usboh3], NULL, "2184200.usb");
-        clk_register_clkdev(clk[usboh3], NULL, "2184400.usb");
-        clk_register_clkdev(clk[usboh3], NULL, "2184600.usb");
-        clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy");
-        clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy");
-        clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
-        clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
-        clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
-        clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
-        clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
-        clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
-        clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
-        clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
-        clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
-        clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
-        clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
-        clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
-        clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
-        clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
-        clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
-        clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
-        clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
-        clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
-        clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
-        clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
-        clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
-        clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
-        clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
-        clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
-        clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
-        clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
-        clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
        clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
        clk_register_clkdev(clk[ahb], "ahb", NULL);
        clk_register_clkdev(clk[cko1], "cko1", NULL);
+        /*
+         * The gpmi needs 100MHz frequency in the EDO/Sync mode,
+         * We can not get the 100MHz from the pll2_pfd0_352m.
+         * So choose pll2_pfd2_396m as enfc_sel's parent.
+         */
+        clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clk[clks_init_on[i]]);
diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
deleted file mode 100644
index 77e0db96c448..000000000000
--- a/arch/arm/mach-imx/devices-imx53.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata)   \
-        imx_add_fec(&imx53_fec_data, pdata)
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata)   \
-        imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata)    \
-        imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata)    \
-        imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata)      \
-        imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id)  \
-        imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata)    \
-        imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata)     \
-        imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
-        imx_add_pata_imx(&imx53_pata_imx_data)
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-imx/efika.h b/arch/arm/mach-imx/efika.h
deleted file mode 100644
index 014aa985faae..000000000000
--- a/arch/arm/mach-imx/efika.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-#define EFIKA_WLAN_EN           IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET        IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET     IMX_GPIO_NR(2, 9)
-void __init efika_board_common_init(void);
-#endif
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index d4067fe36357..f233b4bb2342 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -44,27 +43,8 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
        { /* sentinel */ }
 };
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
-        { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
-        { /* sentinel */ }
-};
 static void __init imx51_dt_init(void)
 {
-        struct device_node *node;
-        const struct of_device_id *of_id;
-        void (*func)(void);
-        pinctrl_provide_dummies();
-        node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
-        if (node) {
-                of_id = of_match_node(imx51_iomuxc_of_match, node);
-                func = of_id->data;
-                func();
-                of_node_put(node);
-        }
        of_platform_populate(NULL, of_default_bus_match_table,
                             imx51_auxdata_lookup, NULL);
 }
@@ -79,7 +59,6 @@ static struct sys_timer imx51_timer = {
 };
 static const char *imx51_dt_board_compat[] __initdata = {
-        "fsl,imx51-babbage",
        "fsl,imx51",
        NULL
 };
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/mach-imx53.c
index 1b7a2fc36591..29711e95579f 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -17,7 +17,6 @@
 #include <linux/irq.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -51,14 +50,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
        { /* sentinel */ }
 };
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
-        { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
-        { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
-        { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
-        { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
-        { /* sentinel */ }
-};
 static void __init imx53_qsb_init(void)
 {
        struct clk *clk;
@@ -74,20 +65,6 @@ static void __init imx53_qsb_init(void)
 static void __init imx53_dt_init(void)
 {
-        struct device_node *node;
-        const struct of_device_id *of_id;
-        void (*func)(void);
-        pinctrl_provide_dummies();
-        node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
-        if (node) {
-                of_id = of_match_node(imx53_iomuxc_of_match, node);
-                func = of_id->data;
-                func();
-                of_node_put(node);
-        }
        if (of_machine_is_compatible("fsl,imx53-qsb"))
                imx53_qsb_init();
@@ -105,10 +82,6 @@ static struct sys_timer imx53_timer = {
 };
 static const char *imx53_dt_board_compat[] __initdata = {
-        "fsl,imx53-ard",
-        "fsl,imx53-evk",
-        "fsl,imx53-qsb",
-        "fsl,imx53-smd",
        "fsl,imx53",
        NULL
 };
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 045b3f6a387d..692b4b143bb1 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -22,7 +22,6 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/anatop.h>
@@ -100,7 +99,6 @@ static void __init imx6q_sabrelite_cko1_setup(void)
        clk_set_parent(cko1_sel, ahb);
        rate = clk_round_rate(cko1, 16000000);
        clk_set_rate(cko1, rate);
-        clk_register_clkdev(cko1, NULL, "0-000a");
 put_clk:
        if (!IS_ERR(cko1_sel))
                clk_put(cko1_sel);
@@ -159,12 +157,6 @@ static void __init imx6q_usb_init(void)
 static void __init imx6q_init_machine(void)
 {
-        /*
-         * This should be removed when all imx6q boards have pinctrl
-         * states for devices defined in device tree.
-         */
-        pinctrl_provide_dummies();
        if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
                imx6q_sabrelite_init();
@@ -218,9 +210,6 @@ static struct sys_timer imx6q_timer = {
 };
 static const char *imx6q_dt_compat[] __initdata = {
-        "fsl,imx6q-arm2",
-        "fsl,imx6q-sabrelite",
-        "fsl,imx6q-sabresd",
        "fsl,imx6q",
        NULL,
 };
diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
deleted file mode 100644
index 8d09c0126cab..000000000000
--- a/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include "devices-imx51.h"
-#include "efika.h"
-#define EFIKAMX_PCBID0          IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1          IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2          IMX_GPIO_NR(3, 11)
-#define EFIKAMX_BLUE_LED        IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED       IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED         IMX_GPIO_NR(3, 15)
-#define EFIKAMX_POWER_KEY       IMX_GPIO_NR(2, 31)
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1        IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET           IMX_GPIO_NR(1, 4)
-#define EFIKAMX_POWEROFF        IMX_GPIO_NR(4, 13)
-#define EFIKAMX_PMIC            IMX_GPIO_NR(1, 6)
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
-        /* board id */
-        MX51_PAD_PCBID0,
-        MX51_PAD_PCBID1,
-        MX51_PAD_PCBID2,
-        /* leds */
-        MX51_PAD_CSI1_D9__GPIO3_13,
-        MX51_PAD_CSI1_VSYNC__GPIO3_14,
-        MX51_PAD_CSI1_HSYNC__GPIO3_15,
-        /* power key */
-        MX51_PAD_PWRKEY,
-        /* reset */
-        MX51_PAD_DI1_PIN13__GPIO3_2,
-        MX51_PAD_GPIO1_4__GPIO1_4,
-        /* power off */
-        MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-/*   PCBID2  PCBID1 PCBID0  STATE
-        1       1      1    ER1:rev1.1
-        1       1      0    ER2:rev1.2
-        1       0      1    ER3:rev1.3
-        1       0      0    ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
-        int id;
-        /* things are taking time to settle */
-        msleep(150);
-        gpio_request(EFIKAMX_PCBID0, "pcbid0");
-        gpio_direction_input(EFIKAMX_PCBID0);
-        gpio_request(EFIKAMX_PCBID1, "pcbid1");
-        gpio_direction_input(EFIKAMX_PCBID1);
-        gpio_request(EFIKAMX_PCBID2, "pcbid2");
-        gpio_direction_input(EFIKAMX_PCBID2);
-        id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
-        id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
-        id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-        switch (id) {
-        case 7:
-                system_rev = 0x11;
-                break;
-        case 6:
-                system_rev = 0x12;
-                break;
-        case 5:
-                system_rev = 0x13;
-                break;
-        case 4:
-                system_rev = 0x14;
-                break;
-        default:
-                system_rev = 0x10;
-                break;
-        }
-        if ((system_rev == 0x10)
-                || (system_rev == 0x12)
-                || (system_rev == 0x14)) {
-                printk(KERN_WARNING
-                        "EfikaMX: Unsupported board revision 1.%u!\n",
-                        system_rev & 0xf);
-        }
-}
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
-        {
-                .name = "efikamx:green",
-                .default_trigger = "default-on",
-                .gpio = EFIKAMX_GREEN_LED,
-        },
-        {
-                .name = "efikamx:red",
-                .default_trigger = "ide-disk",
-                .gpio = EFIKAMX_RED_LED,
-        },
-        {
-                .name = "efikamx:blue",
-                .default_trigger = "mmc0",
-                .gpio = EFIKAMX_BLUE_LED,
-        },
-};
-static const struct gpio_led_platform_data
-                mx51_efikamx_leds_data __initconst = {
-        .leds = mx51_efikamx_leds,
-        .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-static struct esdhc_platform_data sd_pdata = {
-        .cd_type = ESDHC_CD_CONTROLLER,
-        .wp_type = ESDHC_WP_CONTROLLER,
-};
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
-        {
-                .code = KEY_POWER,
-                .gpio = EFIKAMX_POWER_KEY,
-                .type = EV_PWR,
-                .desc = "Power Button (CM)",
-                .wakeup = 1,
-                .debounce_interval = 10, /* ms */
-        },
-};
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
-        .buttons = mx51_efikamx_powerkey,
-        .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-static void mx51_efikamx_restart(char mode, const char *cmd)
-{
-        if (system_rev == 0x11)
-                gpio_direction_output(EFIKAMX_RESET1_1, 0);
-        else
-                gpio_direction_output(EFIKAMX_RESET, 0);
-}
-static struct regulator *pwgt1, *pwgt2, *coincell;
-static void mx51_efikamx_power_off(void)
-{
-        if (!IS_ERR(coincell))
-                regulator_disable(coincell);
-        if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-                regulator_disable(pwgt2);
-                regulator_disable(pwgt1);
-        }
-        gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-static int __init mx51_efikamx_power_init(void)
-{
-        pwgt1 = regulator_get(NULL, "pwgt1");
-        pwgt2 = regulator_get(NULL, "pwgt2");
-        if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-                regulator_enable(pwgt1);
-                regulator_enable(pwgt2);
-        }
-        gpio_request(EFIKAMX_POWEROFF, "poweroff");
-        pm_power_off = mx51_efikamx_power_off;
-        /* enable coincell charger. maybe need a small power driver ? */
-        coincell = regulator_get(NULL, "coincell");
-        if (!IS_ERR(coincell)) {
-                regulator_set_voltage(coincell, 3000000, 3000000);
-                regulator_enable(coincell);
-        }
-        regulator_has_full_constraints();
-        return 0;
-}
-static void __init mx51_efikamx_init_late(void)
-{
-        imx51_init_late();
-        mx51_efikamx_power_init();
-}
-static void __init mx51_efikamx_init(void)
-{
-        imx51_soc_init();
-        mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
-                                        ARRAY_SIZE(mx51efikamx_pads));
-        efika_board_common_init();
-        mx51_efikamx_board_id();
-        /* on < 1.2 boards both SD controllers are used */
-        if (system_rev < 0x12) {
-                imx51_add_sdhci_esdhc_imx(0, NULL);
-                imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
-                mx51_efikamx_leds[2].default_trigger = "mmc1";
-        } else
-                imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-        gpio_led_register_device(-1, &mx51_efikamx_leds_data);
-        imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-        if (system_rev == 0x11) {
-                gpio_request(EFIKAMX_RESET1_1, "reset");
-                gpio_direction_output(EFIKAMX_RESET1_1, 1);
-        } else {
-                gpio_request(EFIKAMX_RESET, "reset");
-                gpio_direction_output(EFIKAMX_RESET, 1);
-        }
-        /*
-         * enable wifi by default only on mx
-         * sb and mx have same wlan pin but the value to enable it are
-         * different :/
-         */
-        gpio_request(EFIKA_WLAN_EN, "wlan_en");
-        gpio_direction_output(EFIKA_WLAN_EN, 0);
-        msleep(10);
-        gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
-        gpio_direction_output(EFIKA_WLAN_RESET, 0);
-        msleep(10);
-        gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-static void __init mx51_efikamx_timer_init(void)
-{
-        mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-static struct sys_timer mx51_efikamx_timer = {
-        .init = mx51_efikamx_timer_init,
-};
-MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
-        .atag_offset = 0x100,
-        .map_io = mx51_map_io,
-        .init_early = imx51_init_early,
-        .init_irq = mx51_init_irq,
-        .handle_irq = imx51_handle_irq,
-        .timer = &mx51_efikamx_timer,
-        .init_machine = mx51_efikamx_init,
-        .init_late = mx51_efikamx_init_late,
-        .restart = mx51_efikamx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
deleted file mode 100644
index fdbd181b97ef..000000000000
--- a/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include "devices-imx51.h"
-#include "efika.h"
-#define EFIKASB_USBH2_STP       IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED       IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED       IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0          IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1          IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY          IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID             IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF        IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL          IMX_GPIO_NR(3, 1)
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
-        /* USB HOST2 */
-        MX51_PAD_EIM_D16__USBH2_DATA0,
-        MX51_PAD_EIM_D17__USBH2_DATA1,
-        MX51_PAD_EIM_D18__USBH2_DATA2,
-        MX51_PAD_EIM_D19__USBH2_DATA3,
-        MX51_PAD_EIM_D20__USBH2_DATA4,
-        MX51_PAD_EIM_D21__USBH2_DATA5,
-        MX51_PAD_EIM_D22__USBH2_DATA6,
-        MX51_PAD_EIM_D23__USBH2_DATA7,
-        MX51_PAD_EIM_A24__USBH2_CLK,
-        MX51_PAD_EIM_A25__USBH2_DIR,
-        MX51_PAD_EIM_A26__USBH2_STP,
-        MX51_PAD_EIM_A27__USBH2_NXT,
-        /* leds */
-        MX51_PAD_EIM_CS0__GPIO2_25,
-        MX51_PAD_GPIO1_3__GPIO1_3,
-        /* pcb id */
-        MX51_PAD_EIM_CS3__GPIO2_28,
-        MX51_PAD_EIM_CS4__GPIO2_29,
-        /* lid */
-        MX51_PAD_CSI1_VSYNC__GPIO3_14,
-        /* power key*/
-        MX51_PAD_PWRKEY,
-        /* wifi/bt button */
-        MX51_PAD_DI1_PIN12__GPIO3_1,
-        /* power off */
-        MX51_PAD_CSI2_VSYNC__GPIO4_13,
-        /* wdog reset */
-        MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-        /* BT */
-        MX51_PAD_EIM_A17__GPIO2_11,
-        MX51_PAD_SD1_CD,
-};
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
-        iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
-        iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-        mxc_iomux_v3_setup_pad(usbh2gpio);
-        gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
-        gpio_direction_output(EFIKASB_USBH2_STP, 0);
-        msleep(1);
-        gpio_set_value(EFIKASB_USBH2_STP, 1);
-        msleep(1);
-        gpio_free(EFIKASB_USBH2_STP);
-        mxc_iomux_v3_setup_pad(usbh2stp);
-        mdelay(10);
-        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
-        .init   = initialize_usbh2_port,
-        .portsc = MXC_EHCI_MODE_ULPI,
-};
-static void __init mx51_efikasb_usb(void)
-{
-        usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-                        ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-        if (usbh2_config.otg)
-                imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
-        {
-                .name = "efikasb:green",
-                .default_trigger = "default-on",
-                .gpio = EFIKASB_GREEN_LED,
-                .active_low = 1,
-        },
-        {
-                .name = "efikasb:white",
-                .default_trigger = "caps",
-                .gpio = EFIKASB_WHITE_LED,
-        },
-};
-static const struct gpio_led_platform_data
-                mx51_efikasb_leds_data __initconst = {
-        .leds = mx51_efikasb_leds,
-        .num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-static struct gpio_keys_button mx51_efikasb_keys[] = {
-        {
-                .code = KEY_POWER,
-                .gpio = EFIKASB_PWRKEY,
-                .type = EV_KEY,
-                .desc = "Power Button",
-                .wakeup = 1,
-                .active_low = 1,
-        },
-        {
-                .code = SW_LID,
-                .gpio = EFIKASB_LID,
-                .type = EV_SW,
-                .desc = "Lid Switch",
-                .active_low = 1,
-        },
-        {
-                .code = KEY_RFKILL,
-                .gpio = EFIKASB_RFKILL,
-                .type = EV_KEY,
-                .desc = "rfkill",
-                .active_low = 1,
-        },
-};
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
-        .buttons = mx51_efikasb_keys,
-        .nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD  IMX_GPIO_NR(2, 27)
-        .cd_gpio = EFIKASB_SD1_CD,
-        .cd_type = ESDHC_CD_GPIO,
-        .wp_type = ESDHC_WP_CONTROLLER,
-};
-static struct esdhc_platform_data sd1_pdata = {
-        .cd_type = ESDHC_CD_CONTROLLER,
-        .wp_type = ESDHC_WP_CONTROLLER,
-};
-static struct regulator *pwgt1, *pwgt2;
-static void mx51_efikasb_power_off(void)
-{
-        gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-        if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-                regulator_disable(pwgt2);
-                regulator_disable(pwgt1);
-        }
-        gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-static int __init mx51_efikasb_power_init(void)
-{
-        pwgt1 = regulator_get(NULL, "pwgt1");
-        pwgt2 = regulator_get(NULL, "pwgt2");
-        if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-                regulator_enable(pwgt1);
-                regulator_enable(pwgt2);
-        }
-        gpio_request(EFIKASB_POWEROFF, "poweroff");
-        pm_power_off = mx51_efikasb_power_off;
-        regulator_has_full_constraints();
-        return 0;
-}
-static void __init mx51_efikasb_init_late(void)
-{
-        imx51_init_late();
-        mx51_efikasb_power_init();
-}
-/* 01     R1.3 board
-   10     R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
-        int id;
-        gpio_request(EFIKASB_PCBID0, "pcb id0");
-        gpio_direction_input(EFIKASB_PCBID0);
-        gpio_request(EFIKASB_PCBID1, "pcb id1");
-        gpio_direction_input(EFIKASB_PCBID1);
-        id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
-        id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-        switch (id) {
-        default:
-                break;
-        case 1:
-                system_rev = 0x13;
-                break;
-        case 2:
-                system_rev = 0x20;
-                break;
-        }
-}
-static void __init efikasb_board_init(void)
-{
-        imx51_soc_init();
-        mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
-                                        ARRAY_SIZE(mx51efikasb_pads));
-        efika_board_common_init();
-        mx51_efikasb_board_id();
-        mx51_efikasb_usb();
-        imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
-        imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-        gpio_led_register_device(-1, &mx51_efikasb_leds_data);
-        imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-static void __init mx51_efikasb_timer_init(void)
-{
-        mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-static struct sys_timer mx51_efikasb_timer = {
-        .init   = mx51_efikasb_timer_init,
-};
-MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
-        .atag_offset = 0x100,
-        .map_io = mx51_map_io,
-        .init_early = imx51_init_early,
-        .init_irq = mx51_init_irq,
-        .handle_irq = imx51_handle_irq,
-        .init_machine =  efikasb_board_init,
-        .init_late = mx51_efikasb_init_late,
-        .timer = &mx51_efikasb_timer,
-        .restart        = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
deleted file mode 100644
index 6c28e65f424d..000000000000
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include "devices-imx53.h"
-#define ARD_ETHERNET_INT_B      IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD              IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP              IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B        IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN          IMX_GPIO_NR(4, 0)
-#define ARD_HOME                        IMX_GPIO_NR(5, 10)
-#define ARD_BACK                        IMX_GPIO_NR(5, 11)
-#define ARD_PROG                        IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP            IMX_GPIO_NR(5, 13)
-static iomux_v3_cfg_t mx53_ard_pads[] = {
-        /* UART1 */
-        MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-        MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
-        /* WEIM for CS1 */
-        MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
-        MX53_PAD_EIM_D16__EMI_WEIM_D_16,
-        MX53_PAD_EIM_D17__EMI_WEIM_D_17,
-        MX53_PAD_EIM_D18__EMI_WEIM_D_18,
-        MX53_PAD_EIM_D19__EMI_WEIM_D_19,
-        MX53_PAD_EIM_D20__EMI_WEIM_D_20,
-        MX53_PAD_EIM_D21__EMI_WEIM_D_21,
-        MX53_PAD_EIM_D22__EMI_WEIM_D_22,
-        MX53_PAD_EIM_D23__EMI_WEIM_D_23,
-        MX53_PAD_EIM_D24__EMI_WEIM_D_24,
-        MX53_PAD_EIM_D25__EMI_WEIM_D_25,
-        MX53_PAD_EIM_D26__EMI_WEIM_D_26,
-        MX53_PAD_EIM_D27__EMI_WEIM_D_27,
-        MX53_PAD_EIM_D28__EMI_WEIM_D_28,
-        MX53_PAD_EIM_D29__EMI_WEIM_D_29,
-        MX53_PAD_EIM_D30__EMI_WEIM_D_30,
-        MX53_PAD_EIM_D31__EMI_WEIM_D_31,
-        MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-        MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-        MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-        MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-        MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-        MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-        MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-        MX53_PAD_EIM_OE__EMI_WEIM_OE,
-        MX53_PAD_EIM_RW__EMI_WEIM_RW,
-        MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
-        /* SDHC1 */
-        MX53_PAD_SD1_CMD__ESDHC1_CMD,
-        MX53_PAD_SD1_CLK__ESDHC1_CLK,
-        MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-        MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-        MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-        MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-        MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
-        MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
-        MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
-        MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
-        MX53_PAD_GPIO_1__GPIO1_1,
-        MX53_PAD_GPIO_9__GPIO1_9,
-        /* I2C2 */
-        MX53_PAD_EIM_EB2__I2C2_SCL,
-        MX53_PAD_KEY_ROW3__I2C2_SDA,
-        /* I2C3 */
-        MX53_PAD_GPIO_3__I2C3_SCL,
-        MX53_PAD_GPIO_16__I2C3_SDA,
-        /* GPIO */
-        MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
-        MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
-        MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
-        MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
-        MX53_PAD_GPIO_10__GPIO4_0,              /* vol down */
-};
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)    \
-{                                                       \
-        .gpio           = gpio_num,                             \
-        .type           = EV_KEY,                               \
-        .code           = ev_code,                              \
-        .active_low     = act_low,                              \
-        .desc           = "btn " descr,                 \
-        .wakeup         = wake,                                 \
-}
-static struct gpio_keys_button ard_buttons[] = {
-        GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
-        GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
-        GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
-        GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
-        GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
-        .buttons        = ard_buttons,
-        .nbuttons       = ARRAY_SIZE(ard_buttons),
-};
-static struct resource ard_smsc911x_resources[] = {
-        {
-                .start = MX53_CS1_64MB_BASE_ADDR,
-                .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                /* irq number is run-time assigned */
-                .flags = IORESOURCE_IRQ,
-        },
-};
-struct smsc911x_platform_config ard_smsc911x_config = {
-        .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-        .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-        .flags = SMSC911X_USE_32BIT,
-};
-static struct platform_device ard_smsc_lan9220_device = {
-        .name = "smsc911x",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(ard_smsc911x_resources),
-        .resource = ard_smsc911x_resources,
-        .dev = {
-                .platform_data = &ard_smsc911x_config,
-        },
-};
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
-        .cd_gpio = ARD_SD1_CD,
-        .wp_gpio = ARD_SD1_WP,
-};
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
-        .bitrate = 50000,
-};
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
-        .bitrate = 400000,
-};
-static void __init mx53_ard_io_init(void)
-{
-        gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
-        gpio_direction_input(ARD_ETHERNET_INT_B);
-        gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
-        gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
-        u32 reg;
-        void __iomem *weim_base, *iomuxc_base;
-        weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
-        if (!weim_base)
-                return -ENOMEM;
-        iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-        if (!iomuxc_base) {
-                iounmap(weim_base);
-                return -ENOMEM;
-        }
-        /* CS1 timings for LAN9220 */
-        writel(0x20001, (weim_base + 0x18));
-        writel(0x0, (weim_base + 0x1C));
-        writel(0x16000202, (weim_base + 0x20));
-        writel(0x00000002, (weim_base + 0x24));
-        writel(0x16002082, (weim_base + 0x28));
-        writel(0x00000000, (weim_base + 0x2C));
-        writel(0x00000000, (weim_base + 0x90));
-        /* specify 64 MB on CS1 and CS0 on GPR1 */
-        reg = readl(iomuxc_base + 0x4);
-        reg &= ~0x3F;
-        reg |= 0x1B;
-        writel(reg, (iomuxc_base + 0x4));
-        iounmap(iomuxc_base);
-        iounmap(weim_base);
-        return 0;
-}
-static struct regulator_consumer_supply dummy_supplies[] = {
-        REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-        REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-void __init imx53_ard_common_init(void)
-{
-        mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
-                                         ARRAY_SIZE(mx53_ard_pads));
-        weim_cs_config();
-}
-static struct platform_device *devices[] __initdata = {
-        &ard_smsc_lan9220_device,
-};
-static void __init mx53_ard_board_init(void)
-{
-        imx53_soc_init();
-        imx53_add_imx_uart(0, NULL);
-        imx53_ard_common_init();
-        mx53_ard_io_init();
-        regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-        ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B);
-        ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B);
-        platform_add_devices(devices, ARRAY_SIZE(devices));
-        imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
-        imx53_add_imx2_wdt(0);
-        imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
-        imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
-        imx_add_gpio_keys(&ard_button_data);
-        imx53_add_ahci_imx();
-}
-static void __init mx53_ard_timer_init(void)
-{
-        mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-static struct sys_timer mx53_ard_timer = {
-        .init   = mx53_ard_timer_init,
-};
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
-        .map_io = mx53_map_io,
-        .init_early = imx53_init_early,
-        .init_irq = mx53_init_irq,
-        .handle_irq = imx53_handle_irq,
-        .timer = &mx53_ard_timer,
-        .init_machine = mx53_ard_board_init,
-        .init_late      = imx53_init_late,
-        .restart        = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
deleted file mode 100644
index 09fe2197b491..000000000000
--- a/arch/arm/mach-imx/mach-mx53_evk.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-#define MX53_EVK_FEC_PHY_RST    IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0          IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1          IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED             IMX_GPIO_NR(7, 7)
-#include "devices-imx53.h"
-static iomux_v3_cfg_t mx53_evk_pads[] = {
-        MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-        MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-        MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-        MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-        MX53_PAD_PATA_DIOR__UART2_RTS,
-        MX53_PAD_PATA_INTRQ__UART2_CTS,
-        MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-        MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-        MX53_PAD_EIM_D16__ECSPI1_SCLK,
-        MX53_PAD_EIM_D17__ECSPI1_MISO,
-        MX53_PAD_EIM_D18__ECSPI1_MOSI,
-        /* ecspi chip select lines */
-        MX53_PAD_EIM_EB2__GPIO2_30,
-        MX53_PAD_EIM_D19__GPIO3_19,
-        /* LED */
-        MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
-        .flags = IMXUART_HAVE_RTSCTS,
-};
-static const struct gpio_led mx53evk_leds[] __initconst = {
-        {
-                .name                   = "green",
-                .default_trigger        = "heartbeat",
-                .gpio                   = MX53EVK_LED,
-        },
-};
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
-        .leds           = mx53evk_leds,
-        .num_leds       = ARRAY_SIZE(mx53evk_leds),
-};
-static inline void mx53_evk_init_uart(void)
-{
-        imx53_add_imx_uart(0, NULL);
-        imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
-        imx53_add_imx_uart(2, NULL);
-}
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
-        .bitrate = 100000,
-};
-static inline void mx53_evk_fec_reset(void)
-{
-        int ret;
-        /* reset FEC PHY */
-        ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
-                                                        "fec-phy-reset");
-        if (ret) {
-                printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-                return;
-        }
-        msleep(1);
-        gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
-        .phy = PHY_INTERFACE_MODE_RMII,
-};
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
-        {
-                .modalias = "mtd_dataflash",
-                .max_speed_hz = 25000000,
-                .bus_num = 0,
-                .chip_select = 1,
-                .mode = SPI_MODE_0,
-                .platform_data = NULL,
-        },
-};
-static int mx53_evk_spi_cs[] = {
-        EVK_ECSPI1_CS0,
-        EVK_ECSPI1_CS1,
-};
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
-        .chipselect     = mx53_evk_spi_cs,
-        .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-void __init imx53_evk_common_init(void)
-{
-        mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
-                                         ARRAY_SIZE(mx53_evk_pads));
-}
-static void __init mx53_evk_board_init(void)
-{
-        imx53_soc_init();
-        imx53_evk_common_init();
-        mx53_evk_init_uart();
-        mx53_evk_fec_reset();
-        imx53_add_fec(&mx53_evk_fec_pdata);
-        imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
-        imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-        imx53_add_sdhci_esdhc_imx(0, NULL);
-        imx53_add_sdhci_esdhc_imx(1, NULL);
-        spi_register_board_info(mx53_evk_spi_board_info,
-                ARRAY_SIZE(mx53_evk_spi_board_info));
-        imx53_add_ecspi(0, &mx53_evk_spi_data);
-        imx53_add_imx2_wdt(0);
-        gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-static void __init mx53_evk_timer_init(void)
-{
-        mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-static struct sys_timer mx53_evk_timer = {
-        .init   = mx53_evk_timer_init,
-};
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
-        .map_io = mx53_map_io,
-        .init_early = imx53_init_early,
-        .init_irq = mx53_init_irq,
-        .handle_irq = imx53_handle_irq,
-        .timer = &mx53_evk_timer,
-        .init_machine = mx53_evk_board_init,
-        .init_late      = imx53_init_late,
-        .restart        = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
deleted file mode 100644
index 8abe23c1d3c8..000000000000
--- a/arch/arm/mach-imx/mach-mx53_loco.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include "devices-imx53.h"
-#define MX53_LOCO_POWER                 IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1                   IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2                   IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST                IMX_GPIO_NR(7, 6)
-#define LOCO_LED                        IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD                     IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP                     IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD                     IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN                   IMX_GPIO_NR(6, 14)
-static iomux_v3_cfg_t mx53_loco_pads[] = {
-        /* FEC */
-        MX53_PAD_FEC_MDC__FEC_MDC,
-        MX53_PAD_FEC_MDIO__FEC_MDIO,
-        MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
-        MX53_PAD_FEC_RX_ER__FEC_RX_ER,
-        MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
-        MX53_PAD_FEC_RXD1__FEC_RDATA_1,
-        MX53_PAD_FEC_RXD0__FEC_RDATA_0,
-        MX53_PAD_FEC_TX_EN__FEC_TX_EN,
-        MX53_PAD_FEC_TXD1__FEC_TDATA_1,
-        MX53_PAD_FEC_TXD0__FEC_TDATA_0,
-        /* FEC_nRST */
-        MX53_PAD_PATA_DA_0__GPIO7_6,
-        /* FEC_nINT */
-        MX53_PAD_PATA_DATA4__GPIO2_4,
-        /* AUDMUX5 */
-        MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
-        MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
-        MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
-        MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
-        /* I2C1 */
-        MX53_PAD_CSI0_DAT8__I2C1_SDA,
-        MX53_PAD_CSI0_DAT9__I2C1_SCL,
-        MX53_PAD_NANDF_CS1__GPIO6_14,   /* Accelerometer Enable */
-        /* I2C2 */
-        MX53_PAD_KEY_COL3__I2C2_SCL,
-        MX53_PAD_KEY_ROW3__I2C2_SDA,
-        /* SD1 */
-        MX53_PAD_SD1_CMD__ESDHC1_CMD,
-        MX53_PAD_SD1_CLK__ESDHC1_CLK,
-        MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-        MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-        MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-        MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-        /* SD1_CD */
-        MX53_PAD_EIM_DA13__GPIO3_13,
-        /* SD3 */
-        MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-        MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-        MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-        MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-        MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-        MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-        MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-        MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-        MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-        MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-        /* SD3_CD */
-        MX53_PAD_EIM_DA11__GPIO3_11,
-        /* SD3_WP */
-        MX53_PAD_EIM_DA12__GPIO3_12,
-        /* VGA */
-        MX53_PAD_EIM_OE__IPU_DI1_PIN7,
-        MX53_PAD_EIM_RW__IPU_DI1_PIN8,
-        /* DISPLB */
-        MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
-        MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
-        MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
-        MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
-        /* DISP0_POWER_EN */
-        MX53_PAD_EIM_D24__GPIO3_24,
-        /* DISP0 DET INT */
-        MX53_PAD_EIM_D31__GPIO3_31,
-        /* LVDS */
-        MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
-        MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
-        MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
-        MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
-        MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
-        MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
-        MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
-        MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
-        MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
-        MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
-        /* I2C1 */
-        MX53_PAD_CSI0_DAT8__I2C1_SDA,
-        MX53_PAD_CSI0_DAT9__I2C1_SCL,
-        /* UART1 */
-        MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-        MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-        /* CSI0 */
-        MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
-        MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
-        MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
-        MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
-        MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
-        MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
-        MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
-        MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
-        MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
-        MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
-        MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
-        /* DISPLAY */
-        MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-        MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-        MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-        MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-        MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-        MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-        MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-        MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-        MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-        MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-        MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-        MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-        MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-        MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-        MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-        MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-        MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-        MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-        MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-        MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-        MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-        MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-        MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-        MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-        MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-        MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-        MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-        MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-        /* Audio CLK*/
-        MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
-        /* PWM */
-        MX53_PAD_GPIO_1__PWM2_PWMO,
-        /* SPDIF */
-        MX53_PAD_GPIO_7__SPDIF_PLOCK,
-        MX53_PAD_GPIO_17__SPDIF_OUT1,
-        /* GPIO */
-        MX53_PAD_PATA_DA_1__GPIO7_7,            /* LED */
-        MX53_PAD_PATA_DA_2__GPIO7_8,
-        MX53_PAD_PATA_DATA5__GPIO2_5,
-        MX53_PAD_PATA_DATA6__GPIO2_6,
-        MX53_PAD_PATA_DATA14__GPIO2_14,
-        MX53_PAD_PATA_DATA15__GPIO2_15,
-        MX53_PAD_PATA_INTRQ__GPIO7_2,
-        MX53_PAD_EIM_WAIT__GPIO5_0,
-        MX53_PAD_NANDF_WP_B__GPIO6_9,
-        MX53_PAD_NANDF_RB0__GPIO6_10,
-        MX53_PAD_NANDF_CS1__GPIO6_14,
-        MX53_PAD_NANDF_CS2__GPIO6_15,
-        MX53_PAD_NANDF_CS3__GPIO6_16,
-        MX53_PAD_GPIO_5__GPIO1_5,
-        MX53_PAD_GPIO_16__GPIO7_11,
-        MX53_PAD_GPIO_8__GPIO1_8,
-};
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)    \
-{                                                               \
-        .gpio           = gpio_num,                             \
-        .type           = EV_KEY,                               \
-        .code           = ev_code,                              \
-        .active_low     = act_low,                              \
-        .desc           = "btn " descr,                         \
-        .wakeup         = wake,                                 \
-}
-static struct gpio_keys_button loco_buttons[] = {
-        GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
-        GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
-        GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
-        .buttons        = loco_buttons,
-        .nbuttons       = ARRAY_SIZE(loco_buttons),
-};
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
-        .cd_gpio = LOCO_SD1_CD,
-        .cd_type = ESDHC_CD_GPIO,
-        .wp_type = ESDHC_WP_NONE,
-};
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
-        .cd_gpio = LOCO_SD3_CD,
-        .wp_gpio = LOCO_SD3_WP,
-        .cd_type = ESDHC_CD_GPIO,
-        .wp_type = ESDHC_WP_GPIO,
-};
-static inline void mx53_loco_fec_reset(void)
-{
-        int ret;
-        /* reset FEC PHY */
-        ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
-        if (ret) {
-                printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-                return;
-        }
-        gpio_direction_output(LOCO_FEC_PHY_RST, 0);
-        msleep(1);
-        gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
-        .phy = PHY_INTERFACE_MODE_RMII,
-};
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
-        .bitrate = 100000,
-};
-static const struct gpio_led mx53loco_leds[] __initconst = {
-        {
-                .name                   = "green",
-                .default_trigger        = "heartbeat",
-                .gpio                   = LOCO_LED,
-        },
-};
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
-        .leds           = mx53loco_leds,
-        .num_leds       = ARRAY_SIZE(mx53loco_leds),
-};
-void __init imx53_qsb_common_init(void)
-{
-        mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
-                                         ARRAY_SIZE(mx53_loco_pads));
-}
-static struct i2c_board_info mx53loco_i2c_devices[] = {
-        {
-                I2C_BOARD_INFO("mma8450", 0x1C),
-        },
-};
-static void __init mx53_loco_board_init(void)
-{
-        int ret;
-        imx53_soc_init();
-        imx53_qsb_common_init();
-        imx53_add_imx_uart(0, NULL);
-        mx53_loco_fec_reset();
-        imx53_add_fec(&mx53_loco_fec_data);
-        imx53_add_imx2_wdt(0);
-        ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
-        if (ret)
-                pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-        i2c_register_board_info(0, mx53loco_i2c_devices,
-                                ARRAY_SIZE(mx53loco_i2c_devices));
-        imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
-        imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
-        imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
-        imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
-        imx_add_gpio_keys(&loco_button_data);
-        gpio_led_register_device(-1, &mx53loco_leds_data);
-        imx53_add_ahci_imx();
-}
-static void __init mx53_loco_timer_init(void)
-{
-        mx53_clocks_init(32768, 24000000, 0, 0);
-}
-static struct sys_timer mx53_loco_timer = {
-        .init   = mx53_loco_timer_init,
-};
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
-        .map_io = mx53_map_io,
-        .init_early = imx53_init_early,
-        .init_irq = mx53_init_irq,
-        .handle_irq = imx53_handle_irq,
-        .timer = &mx53_loco_timer,
-        .init_machine = mx53_loco_board_init,
-        .init_late      = imx53_init_late,
-        .restart        = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
deleted file mode 100644
index b15d6a6d3b68..000000000000
--- a/arch/arm/mach-imx/mach-mx53_smd.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include "devices-imx53.h"
-#define SMD_FEC_PHY_RST         IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
-static iomux_v3_cfg_t mx53_smd_pads[] = {
-        MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-        MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-        MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-        MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-        MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-        MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-        MX53_PAD_PATA_DA_1__UART3_CTS,
-        MX53_PAD_PATA_DA_2__UART3_RTS,
-        /* I2C1 */
-        MX53_PAD_CSI0_DAT8__I2C1_SDA,
-        MX53_PAD_CSI0_DAT9__I2C1_SCL,
-        /* SD1 */
-        MX53_PAD_SD1_CMD__ESDHC1_CMD,
-        MX53_PAD_SD1_CLK__ESDHC1_CLK,
-        MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-        MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-        MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-        MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-        /* SD2 */
-        MX53_PAD_SD2_CMD__ESDHC2_CMD,
-        MX53_PAD_SD2_CLK__ESDHC2_CLK,
-        MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
-        MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
-        MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
-        MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
-        /* SD3 */
-        MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-        MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-        MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-        MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-        MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-        MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-        MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-        MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-        MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-        MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
-        .flags = IMXUART_HAVE_RTSCTS,
-};
-static inline void mx53_smd_init_uart(void)
-{
-        imx53_add_imx_uart(0, NULL);
-        imx53_add_imx_uart(1, NULL);
-        imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-static inline void mx53_smd_fec_reset(void)
-{
-        int ret;
-        /* reset FEC PHY */
-        ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
-        if (ret) {
-                printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-                return;
-        }
-        gpio_direction_output(SMD_FEC_PHY_RST, 0);
-        msleep(1);
-        gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
-        .phy = PHY_INTERFACE_MODE_RMII,
-};
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
-        .bitrate = 100000,
-};
-static inline void mx53_smd_ahci_pwr_on(void)
-{
-        int ret;
-        /* Enable SATA PWR */
-        ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
-                        GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
-        if (ret) {
-                pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
-                return;
-        }
-}
-void __init imx53_smd_common_init(void)
-{
-        mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
-                                         ARRAY_SIZE(mx53_smd_pads));
-}
-static void __init mx53_smd_board_init(void)
-{
-        imx53_soc_init();
-        imx53_smd_common_init();
-        mx53_smd_init_uart();
-        mx53_smd_fec_reset();
-        imx53_add_fec(&mx53_smd_fec_data);
-        imx53_add_imx2_wdt(0);
-        imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
-        imx53_add_sdhci_esdhc_imx(0, NULL);
-        imx53_add_sdhci_esdhc_imx(1, NULL);
-        imx53_add_sdhci_esdhc_imx(2, NULL);
-        mx53_smd_ahci_pwr_on();
-        imx53_add_ahci_imx();
-}
-static void __init mx53_smd_timer_init(void)
-{
-        mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-static struct sys_timer mx53_smd_timer = {
-        .init   = mx53_smd_timer_init,
-};
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
-        .map_io = mx53_map_io,
-        .init_early = imx53_init_early,
-        .init_irq = mx53_init_irq,
-        .handle_irq = imx53_handle_irq,
-        .timer = &mx53_smd_timer,
-        .init_machine = mx53_smd_board_init,
-        .init_late      = imx53_init_late,
-        .restart        = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 52d8f534be10..acb0aadb4255 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -128,25 +128,6 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = {
        .script_addrs = &imx51_sdma_script,
 };
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
-        .ap_2_ap_addr = 642,
-        .app_2_mcu_addr = 683,
-        .mcu_2_app_addr = 747,
-        .uart_2_mcu_addr = 817,
-        .shp_2_mcu_addr = 891,
-        .mcu_2_shp_addr = 960,
-        .uartsh_2_mcu_addr = 1032,
-        .spdif_2_mcu_addr = 1100,
-        .mcu_2_spdif_addr = 1134,
-        .firi_2_mcu_addr = 1193,
-        .mcu_2_firi_addr = 1290,
-};
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
-        .fw_name = "sdma-imx53.bin",
-        .script_addrs = &imx53_sdma_script,
-};
 static const struct resource imx50_audmux_res[] __initconst = {
        DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
 };
@@ -155,10 +136,6 @@ static const struct resource imx51_audmux_res[] __initconst = {
        DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
 };
-static const struct resource imx53_audmux_res[] __initconst = {
-        DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
-};
 void __init imx50_soc_init(void)
 {
        /* i.mx50 has the i.mx35 type gpio */
@@ -196,30 +173,6 @@ void __init imx51_soc_init(void)
                                        ARRAY_SIZE(imx51_audmux_res));
 }
-void __init imx53_soc_init(void)
-{
-        /* i.mx53 has the i.mx35 type gpio */
-        mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
-        mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
-        mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
-        mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
-        mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
-        mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
-        mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-        pinctrl_provide_dummies();
-        /* i.mx53 has the i.mx35 type sdma */
-        imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-        /* Setup AIPS registers */
-        imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
-        imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
-        /* i.mx53 has the i.mx31 type audmux */
-        platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
-                                        ARRAY_SIZE(imx53_audmux_res));
-}
 void __init imx51_init_late(void)
 {
        mx51_neon_fixup();
diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
deleted file mode 100644
index ee870c49bc63..000000000000
--- a/arch/arm/mach-imx/mx51_efika.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-#define MX51_USB_CTRL_1_OFFSET          0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN    (1 << 25)
-#define MX51_USB_PLL_DIV_19_2_MHZ       0x01
-#define EFIKAMX_USB_HUB_RESET   IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP       IMX_GPIO_NR(1, 27)
-#define EFIKAMX_SPI_CS0         IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1         IMX_GPIO_NR(4, 25)
-#define EFIKAMX_PMIC            IMX_GPIO_NR(1, 6)
-static iomux_v3_cfg_t mx51efika_pads[] = {
-        /* UART1 */
-        MX51_PAD_UART1_RXD__UART1_RXD,
-        MX51_PAD_UART1_TXD__UART1_TXD,
-        MX51_PAD_UART1_RTS__UART1_RTS,
-        MX51_PAD_UART1_CTS__UART1_CTS,
-        /* SD 1 */
-        MX51_PAD_SD1_CMD__SD1_CMD,
-        MX51_PAD_SD1_CLK__SD1_CLK,
-        MX51_PAD_SD1_DATA0__SD1_DATA0,
-        MX51_PAD_SD1_DATA1__SD1_DATA1,
-        MX51_PAD_SD1_DATA2__SD1_DATA2,
-        MX51_PAD_SD1_DATA3__SD1_DATA3,
-        /* SD 2 */
-        MX51_PAD_SD2_CMD__SD2_CMD,
-        MX51_PAD_SD2_CLK__SD2_CLK,
-        MX51_PAD_SD2_DATA0__SD2_DATA0,
-        MX51_PAD_SD2_DATA1__SD2_DATA1,
-        MX51_PAD_SD2_DATA2__SD2_DATA2,
-        MX51_PAD_SD2_DATA3__SD2_DATA3,
-        /* SD/MMC WP/CD */
-        MX51_PAD_GPIO1_0__SD1_CD,
-        MX51_PAD_GPIO1_1__SD1_WP,
-        MX51_PAD_GPIO1_7__SD2_WP,
-        MX51_PAD_GPIO1_8__SD2_CD,
-        /* spi */
-        MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-        MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-        MX51_PAD_CSPI1_SS0__GPIO4_24,
-        MX51_PAD_CSPI1_SS1__GPIO4_25,
-        MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
-        MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-        MX51_PAD_GPIO1_6__GPIO1_6,
-        /* USB HOST1 */
-        MX51_PAD_USBH1_CLK__USBH1_CLK,
-        MX51_PAD_USBH1_DIR__USBH1_DIR,
-        MX51_PAD_USBH1_NXT__USBH1_NXT,
-        MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-        MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-        MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-        MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-        MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-        MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-        MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-        MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-        /* USB HUB RESET */
-        MX51_PAD_GPIO1_5__GPIO1_5,
-        /* WLAN */
-        MX51_PAD_EIM_A22__GPIO2_16,
-        MX51_PAD_EIM_A16__GPIO2_10,
-        /* USB PHY RESET */
-        MX51_PAD_EIM_D27__GPIO2_9,
-};
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
-        .flags = IMXUART_HAVE_RTSCTS,
-};
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
-        u32 v;
-        void __iomem *usb_base;
-        void __iomem *usbother_base;
-        usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-        if (!usb_base)
-                return -ENOMEM;
-        usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-        /* Set the PHY clock to 19.2MHz */
-        v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-        v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-        v |= MX51_USB_PLL_DIV_19_2_MHZ;
-        __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-        iounmap(usb_base);
-        mdelay(10);
-        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-        .init   = initialize_otg_port,
-        .portsc = MXC_EHCI_UTMI_16BIT,
-};
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-        iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-        iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-        u32 v;
-        void __iomem *usb_base;
-        void __iomem *socregs_base;
-        mxc_iomux_v3_setup_pad(usbh1gpio);
-        gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
-        gpio_direction_output(EFIKAMX_USBH1_STP, 0);
-        msleep(1);
-        gpio_set_value(EFIKAMX_USBH1_STP, 1);
-        msleep(1);
-        usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-        socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-        /* The clock for the USBH1 ULPI port will come externally */
-        /* from the PHY. */
-        v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
-        __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-                        socregs_base + MX51_USB_CTRL_1_OFFSET);
-        iounmap(usb_base);
-        gpio_free(EFIKAMX_USBH1_STP);
-        mxc_iomux_v3_setup_pad(usbh1stp);
-        mdelay(10);
-        return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
-        .init   = initialize_usbh1_port,
-        .portsc = MXC_EHCI_MODE_ULPI,
-};
-static void mx51_efika_hubreset(void)
-{
-        gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
-        gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
-        msleep(1);
-        gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
-        msleep(1);
-        gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-static void __init mx51_efika_usb(void)
-{
-        mx51_efika_hubreset();
-        /* pulling it low, means no USB at all... */
-        gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
-        gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
-        msleep(1);
-        gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-        usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-                        ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-        imx51_add_mxc_ehci_otg(&dr_utmi_config);
-        if (usbh1_config.otg)
-                imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
-        {
-         .name = "u-boot",
-         .offset = 0,
-         .size = SZ_256K,
-        },
-        {
-          .name = "config",
-          .offset = MTDPART_OFS_APPEND,
-          .size = SZ_64K,
-        },
-};
-static struct flash_platform_data mx51_efika_spi_flash_data = {
-        .name           = "spi_flash",
-        .parts          = mx51_efika_spi_nor_partitions,
-        .nr_parts       = ARRAY_SIZE(mx51_efika_spi_nor_partitions),
-        .type           = "sst25vf032b",
-};
-static struct regulator_consumer_supply sw1_consumers[] = {
-        {
-                .supply = "cpu_vcc",
-        }
-};
-static struct regulator_consumer_supply vdig_consumers[] = {
-        /* sgtl5000 */
-        REGULATOR_SUPPLY("VDDA", "1-000a"),
-        REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-static struct regulator_consumer_supply vvideo_consumers[] = {
-        /* sgtl5000 */
-        REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-static struct regulator_consumer_supply vsd_consumers[] = {
-        REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
-        REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-static struct regulator_consumer_supply pwgt1_consumer[] = {
-        {
-                .supply = "pwgt1",
-        }
-};
-static struct regulator_consumer_supply pwgt2_consumer[] = {
-        {
-                .supply = "pwgt2",
-        }
-};
-static struct regulator_consumer_supply coincell_consumer[] = {
-        {
-                .supply = "coincell",
-        }
-};
-static struct regulator_init_data sw1_init = {
-        .constraints = {
-                .name = "SW1",
-                .min_uV = 600000,
-                .max_uV = 1375000,
-                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-                .valid_modes_mask = 0,
-                .always_on = 1,
-                .boot_on = 1,
-                .state_mem = {
-                        .uV = 850000,
-                        .mode = REGULATOR_MODE_NORMAL,
-                        .enabled = 1,
-                },
-        },
-        .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
-        .consumer_supplies = sw1_consumers,
-};
-static struct regulator_init_data sw2_init = {
-        .constraints = {
-                .name = "SW2",
-                .min_uV = 900000,
-                .max_uV = 1850000,
-                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-                .always_on = 1,
-                .boot_on = 1,
-                .state_mem = {
-                        .uV = 950000,
-                        .mode = REGULATOR_MODE_NORMAL,
-                        .enabled = 1,
-                },
-        }
-};
-static struct regulator_init_data sw3_init = {
-        .constraints = {
-                .name = "SW3",
-                .min_uV = 1100000,
-                .max_uV = 1850000,
-                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-                .always_on = 1,
-                .boot_on = 1,
-        }
-};
-static struct regulator_init_data sw4_init = {
-        .constraints = {
-                .name = "SW4",
-                .min_uV = 1100000,
-                .max_uV = 1850000,
-                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-                .always_on = 1,
-                .boot_on = 1,
-        }
-};
-static struct regulator_init_data viohi_init = {
-        .constraints = {
-                .name = "VIOHI",
-                .boot_on = 1,
-                .always_on = 1,
-        }
-};
-static struct regulator_init_data vusb_init = {
-        .constraints = {
-                .name = "VUSB",
-                .boot_on = 1,
-                .always_on = 1,
-        }
-};
-static struct regulator_init_data swbst_init = {
-        .constraints = {
-                .name = "SWBST",
-        }
-};
-static struct regulator_init_data vdig_init = {
-        .constraints = {
-                .name = "VDIG",
-                .min_uV = 1050000,
-                .max_uV = 1800000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-                .boot_on = 1,
-                .always_on = 1,
-        },
-        .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
-        .consumer_supplies = vdig_consumers,
-};
-static struct regulator_init_data vpll_init = {
-        .constraints = {
-                .name = "VPLL",
-                .min_uV = 1050000,
-                .max_uV = 1800000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-                .boot_on = 1,
-                .always_on = 1,
-        }
-};
-static struct regulator_init_data vusb2_init = {
-        .constraints = {
-                .name = "VUSB2",
-                .min_uV = 2400000,
-                .max_uV = 2775000,
-                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-                .boot_on = 1,
-                .always_on = 1,
-        }
-};
-static struct regulator_init_data vvideo_init = {
-        .constraints = {
-                .name = "VVIDEO",
-                .min_uV = 2775000,
-                .max_uV = 2775000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-                .boot_on = 1,
-                .apply_uV = 1,
-        },
-        .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
-        .consumer_supplies = vvideo_consumers,
-};
-static struct regulator_init_data vaudio_init = {
-        .constraints = {
-                .name = "VAUDIO",
-                .min_uV = 2300000,
-                .max_uV = 3000000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-                .boot_on = 1,
-        }
-};
-static struct regulator_init_data vsd_init = {
-        .constraints = {
-                .name = "VSD",
-                .min_uV = 1800000,
-                .max_uV = 3150000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE,
-                .boot_on = 1,
-        },
-        .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
-        .consumer_supplies = vsd_consumers,
-};
-static struct regulator_init_data vcam_init = {
-        .constraints = {
-                .name = "VCAM",
-                .min_uV = 2500000,
-                .max_uV = 3000000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE |
-                        REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-                .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
-                .boot_on = 1,
-        }
-};
-static struct regulator_init_data vgen1_init = {
-        .constraints = {
-                .name = "VGEN1",
-                .min_uV = 1200000,
-                .max_uV = 3150000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-                .boot_on = 1,
-                .always_on = 1,
-        }
-};
-static struct regulator_init_data vgen2_init = {
-        .constraints = {
-                .name = "VGEN2",
-                .min_uV = 1200000,
-                .max_uV = 3150000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-                .boot_on = 1,
-                .always_on = 1,
-        }
-};
-static struct regulator_init_data vgen3_init = {
-        .constraints = {
-                .name = "VGEN3",
-                .min_uV = 1800000,
-                .max_uV = 2900000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-                .boot_on = 1,
-                .always_on = 1,
-        }
-};
-static struct regulator_init_data gpo1_init = {
-        .constraints = {
-                .name = "GPO1",
-        }
-};
-static struct regulator_init_data gpo2_init = {
-        .constraints = {
-                .name = "GPO2",
-        }
-};
-static struct regulator_init_data gpo3_init = {
-        .constraints = {
-                .name = "GPO3",
-        }
-};
-static struct regulator_init_data gpo4_init = {
-        .constraints = {
-                .name = "GPO4",
-        }
-};
-static struct regulator_init_data pwgt1_init = {
-        .constraints = {
-                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
-                .boot_on        = 1,
-        },
-        .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
-        .consumer_supplies = pwgt1_consumer,
-};
-static struct regulator_init_data pwgt2_init = {
-        .constraints = {
-                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
-                .boot_on        = 1,
-        },
-        .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
-        .consumer_supplies = pwgt2_consumer,
-};
-static struct regulator_init_data vcoincell_init = {
-        .constraints = {
-                .name = "COINCELL",
-                .min_uV = 3000000,
-                .max_uV = 3000000,
-                .valid_ops_mask =
-                        REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-        },
-        .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
-        .consumer_supplies = coincell_consumer,
-};
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
-        { .id = MC13892_SW1,            .init_data =  &sw1_init },
-        { .id = MC13892_SW2,            .init_data =  &sw2_init },
-        { .id = MC13892_SW3,            .init_data =  &sw3_init },
-        { .id = MC13892_SW4,            .init_data =  &sw4_init },
-        { .id = MC13892_SWBST,          .init_data =  &swbst_init },
-        { .id = MC13892_VIOHI,          .init_data =  &viohi_init },
-        { .id = MC13892_VPLL,           .init_data =  &vpll_init },
-        { .id = MC13892_VDIG,           .init_data =  &vdig_init },
-        { .id = MC13892_VSD,            .init_data =  &vsd_init },
-        { .id = MC13892_VUSB2,          .init_data =  &vusb2_init },
-        { .id = MC13892_VVIDEO,         .init_data =  &vvideo_init },
-        { .id = MC13892_VAUDIO,         .init_data =  &vaudio_init },
-        { .id = MC13892_VCAM,           .init_data =  &vcam_init },
-        { .id = MC13892_VGEN1,          .init_data =  &vgen1_init },
-        { .id = MC13892_VGEN2,          .init_data =  &vgen2_init },
-        { .id = MC13892_VGEN3,          .init_data =  &vgen3_init },
-        { .id = MC13892_VUSB,           .init_data =  &vusb_init },
-        { .id = MC13892_GPO1,           .init_data =  &gpo1_init },
-        { .id = MC13892_GPO2,           .init_data =  &gpo2_init },
-        { .id = MC13892_GPO3,           .init_data =  &gpo3_init },
-        { .id = MC13892_GPO4,           .init_data =  &gpo4_init },
-        { .id = MC13892_PWGT1SPI,       .init_data = &pwgt1_init },
-        { .id = MC13892_PWGT2SPI,       .init_data = &pwgt2_init },
-        { .id = MC13892_VCOINCELL,      .init_data = &vcoincell_init },
-};
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
-        .flags = MC13XXX_USE_RTC,
-        .regulators = {
-                .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
-                .regulators = mx51_efika_regulators,
-        },
-};
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
-        {
-                .modalias = "m25p80",
-                .max_speed_hz = 25000000,
-                .bus_num = 0,
-                .chip_select = 1,
-                .platform_data = &mx51_efika_spi_flash_data,
-                .irq = -1,
-        },
-        {
-                .modalias = "mc13892",
-                .max_speed_hz = 1000000,
-                .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = &mx51_efika_mc13892_data,
-                /* irq number is run-time assigned */
-        },
-};
-static int mx51_efika_spi_cs[] = {
-        EFIKAMX_SPI_CS0,
-        EFIKAMX_SPI_CS1,
-};
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
-        .chipselect     = mx51_efika_spi_cs,
-        .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-void __init efika_board_common_init(void)
-{
-        mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
-                                        ARRAY_SIZE(mx51efika_pads));
-        imx51_add_imx_uart(0, &uart_pdata);
-        mx51_efika_usb();
-        /* FIXME: comes from original code. check this. */
-        if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-                sw2_init.constraints.state_mem.uV = 1100000;
-        else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
-                sw2_init.constraints.state_mem.uV = 1250000;
-                sw1_init.constraints.state_mem.uV = 1000000;
-        }
-        if (machine_is_mx51_efikasb())
-                vgen1_init.constraints.max_uV = 1200000;
-        gpio_request(EFIKAMX_PMIC, "pmic irq");
-        gpio_direction_input(EFIKAMX_PMIC);
-        mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC);
-        spi_register_board_info(mx51_efika_spi_board_info,
-                ARRAY_SIZE(mx51_efika_spi_board_info));
-        imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-        imx51_add_pata_imx();
-#if defined(CONFIG_CPU_FREQ_IMX)
-        get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 7fddd01b85b9..d697d07a1bf0 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -108,18 +108,21 @@ endmenu
 config CPU_PXA168
        bool
        select CPU_MOHAWK
+        select COMMON_CLK
        help
          Select code specific to PXA168
 config CPU_PXA910
        bool
        select CPU_MOHAWK
+        select COMMON_CLK
        help
          Select code specific to PXA910
 config CPU_MMP2
        bool
        select CPU_PJ4
+        select COMMON_CLK
        help
          Select code specific to MMP2. MMP2 is ARMv7 compatible.
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index c2ce3d05b044..3a3768c7a191 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -100,7 +100,7 @@ static int __init mmp2_init(void)
 {
        if (cpu_is_mmp2()) {
 #ifdef CONFIG_CACHE_TAUROS2
-                tauros2_init();
+                tauros2_init(0);
 #endif
                mfp_init_base(MFPR_VIRT_BASE);
                mfp_init_addr(mmp2_addr_map);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 7d84521bb715..8b1e16fbb7a5 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/time.h>
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
@@ -83,6 +84,9 @@ void __init pxa910_init_irq(void)
 static int __init pxa910_init(void)
 {
        if (cpu_is_pxa910()) {
+#ifdef CONFIG_CACHE_TAUROS2
+                tauros2_init(0);
+#endif
                mfp_init_base(MFPR_VIRT_BASE);
                mfp_init_addr(pxa910_mfp_addr_map);
                pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 1cd40ad301d3..b2740c800e8c 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -38,8 +38,6 @@ config ARCH_QSD8X50
 config ARCH_MSM8X60
        bool "MSM8X60"
-        select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
-                                  && !MACH_MSM8X60_FFA)
        select ARCH_MSM_SCORPIONMP
        select ARM_GIC
        select CPU_V7
@@ -47,16 +45,17 @@ config ARCH_MSM8X60
        select GPIO_MSM_V2
        select MSM_GPIOMUX
        select MSM_SCM if SMP
+        select USE_OF
 config ARCH_MSM8960
        bool "MSM8960"
        select ARCH_MSM_SCORPIONMP
-        select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3)
        select ARM_GIC
        select CPU_V7
        select MSM_V2_TLMM
        select MSM_GPIOMUX
        select MSM_SCM if SMP
+        select USE_OF
 endchoice
@@ -112,42 +111,6 @@ config MACH_QSD8X50A_ST1_5
        help
          Support for the Qualcomm ST1.5.
-config MACH_MSM8X60_RUMI3
-        depends on ARCH_MSM8X60
-        bool "MSM8x60 RUMI3"
-        help
-          Support for the Qualcomm MSM8x60 RUMI3 emulator.
-config MACH_MSM8X60_SURF
-        depends on ARCH_MSM8X60
-        bool "MSM8x60 SURF"
-        help
-          Support for the Qualcomm MSM8x60 SURF eval board.
-config MACH_MSM8X60_SIM
-        depends on ARCH_MSM8X60
-        bool "MSM8x60 Simulator"
-        help
-          Support for the Qualcomm MSM8x60 simulator.
-config MACH_MSM8X60_FFA
-        depends on ARCH_MSM8X60
-        bool "MSM8x60 FFA"
-        help
-          Support for the Qualcomm MSM8x60 FFA eval board.
-config MACH_MSM8960_SIM
-        depends on ARCH_MSM8960
-        bool "MSM8960 Simulator"
-        help
-          Support for the Qualcomm MSM8960 simulator.
-config MACH_MSM8960_RUMI3
-        depends on ARCH_MSM8960
-        bool "MSM8960 RUMI3"
-        help
-          Support for the Qualcomm MSM8960 RUMI3 emulator.
 endmenu
 config MSM_SMD_PKG3
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 6a6c197212eb..17519faf082f 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -25,8 +25,8 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o b
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
-obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
+obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
 obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
index 9b803a578b4d..f7d6ae9c3487 100644
--- a/arch/arm/mach-msm/Makefile.boot
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -1,3 +1,6 @@
  zreladdr-y            += 0x10008000
 params_phys-y           := 0x10000100
 initrd_phys-y           := 0x10800000
+dtb-$(CONFIG_ARCH_MSM8X60) += msm8660-surf.dtb
+dtb-$(CONFIG_ARCH_MSM8960) += msm8960-cdp.dtb
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
new file mode 100644
index 000000000000..f77f57f39104
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8660.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+#include <mach/board.h>
+#include "common.h"
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+        { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+        {}
+};
+static void __init msm8x60_init_irq(void)
+{
+        of_irq_init(msm_dt_gic_match);
+}
+static void __init msm8x60_init_late(void)
+{
+        smd_debugfs_init();
+}
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+        {}
+};
+static void __init msm8x60_dt_init(void)
+{
+        of_platform_populate(NULL, of_default_bus_match_table,
+                        msm_auxdata_lookup, NULL);
+}
+static const char *msm8x60_fluid_match[] __initdata = {
+        "qcom,msm8660-fluid",
+        "qcom,msm8660-surf",
+        NULL
+};
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+        .map_io = msm_map_msm8x60_io,
+        .init_irq = msm8x60_init_irq,
+        .handle_irq = gic_handle_irq,
+        .init_machine = msm8x60_dt_init,
+        .init_late = msm8x60_init_late,
+        .timer = &msm_dt_timer,
+        .dt_compat = msm8x60_fluid_match,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c
new file mode 100644
index 000000000000..8df99b8f3c92
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8960.c
@@ -0,0 +1,49 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+static const struct of_device_id msm_dt_gic_match[] __initconst = {
+        { .compatible = "qcom,msm-qgic2", .data = gic_of_init },
+        { }
+};
+static void __init msm_dt_init_irq(void)
+{
+        of_irq_init(msm_dt_gic_match);
+}
+static void __init msm_dt_init(void)
+{
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+static const char * const msm8960_dt_match[] __initconst = {
+        "qcom,msm8960-cdp",
+        NULL
+};
+DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+        .map_io = msm_map_msm8960_io,
+        .init_irq = msm_dt_init_irq,
+        .timer = &msm_dt_timer,
+        .init_machine = msm_dt_init,
+        .dt_compat = msm8960_dt_match,
+        .handle_irq = gic_handle_irq,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 4fa3e99d9a62..6ce542e2e21c 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -36,6 +36,7 @@
 #include <linux/mtd/partitions.h>
 #include "devices.h"
+#include "common.h"
 static struct resource smc91x_resources[] = {
        [0] = {
@@ -66,8 +67,6 @@ static struct platform_device *devices[] __initdata = {
        &smc91x_device,
 };
-extern struct sys_timer msm_timer;
 static void __init halibut_init_early(void)
 {
        arch_ioremap_caller = __msm_ioremap_caller;
@@ -107,5 +106,5 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
        .init_irq       = halibut_init_irq,
        .init_machine   = halibut_init,
        .init_late      = halibut_init_late,
-        .timer          = &msm_timer,
+        .timer          = &msm7x01_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index a5001378135d..effa6f4336c7 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -38,8 +38,7 @@
 #include "devices.h"
 #include "gpiomux.h"
 #include "proc_comm.h"
+#include "common.h"
-extern struct sys_timer msm_timer;
 static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
                struct meminfo *mi)
@@ -132,7 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
        .init_irq = msm7x30_init_irq,
        .init_machine = msm7x30_init,
        .init_late = msm7x30_init_late,
-        .timer = &msm_timer,
+        .timer = &msm7x30_timer,
 MACHINE_END
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
@@ -143,7 +142,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
        .init_irq = msm7x30_init_irq,
        .init_machine = msm7x30_init,
        .init_late = msm7x30_init_late,
-        .timer = &msm_timer,
+        .timer = &msm7x30_timer,
 MACHINE_END
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
@@ -154,5 +153,5 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
        .init_irq = msm7x30_init_irq,
        .init_machine = msm7x30_init,
        .init_late = msm7x30_init_late,
-        .timer = &msm_timer,
+        .timer = &msm7x30_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
deleted file mode 100644
index 65f4a1daa2e5..000000000000
--- a/arch/arm/mach-msm/board-msm8960.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-#include "devices.h"
-static void __init msm8960_fixup(struct tag *tag, char **cmdline,
-                struct meminfo *mi)
-{
-        for (; tag->hdr.size; tag = tag_next(tag))
-                if (tag->hdr.tag == ATAG_MEM &&
-                                tag->u.mem.start == 0x40200000) {
-                        tag->u.mem.start = 0x40000000;
-                        tag->u.mem.size += SZ_2M;
-                }
-}
-static void __init msm8960_reserve(void)
-{
-        memblock_remove(0x40000000, SZ_2M);
-}
-static void __init msm8960_map_io(void)
-{
-        msm_map_msm8960_io();
-}
-static void __init msm8960_init_irq(void)
-{
-        unsigned int i;
-        gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-                 (void *)MSM_QGIC_CPU_BASE);
-        /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-        writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-        if (machine_is_msm8960_rumi3())
-                writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-        /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
-         * as they are configured as level, which does not play nice with
-         * handle_percpu_irq.
-         */
-        for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
-                if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
-                        irq_set_handler(i, handle_percpu_irq);
-        }
-}
-static struct platform_device *sim_devices[] __initdata = {
-        &msm8960_device_uart_gsbi2,
-};
-static struct platform_device *rumi3_devices[] __initdata = {
-        &msm8960_device_uart_gsbi5,
-};
-static void __init msm8960_sim_init(void)
-{
-        platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
-}
-static void __init msm8960_rumi3_init(void)
-{
-        platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
-}
-static void __init msm8960_init_late(void)
-{
-        smd_debugfs_init();
-}
-MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
-        .fixup = msm8960_fixup,
-        .reserve = msm8960_reserve,
-        .map_io = msm8960_map_io,
-        .init_irq = msm8960_init_irq,
-        .timer = &msm_timer,
-        .handle_irq = gic_handle_irq,
-        .init_machine = msm8960_sim_init,
-        .init_late = msm8960_init_late,
-MACHINE_END
-MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
-        .fixup = msm8960_fixup,
-        .reserve = msm8960_reserve,
-        .map_io = msm8960_map_io,
-        .init_irq = msm8960_init_irq,
-        .timer = &msm_timer,
-        .handle_irq = gic_handle_irq,
-        .init_machine = msm8960_rumi3_init,
-        .init_late = msm8960_init_late,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
deleted file mode 100644
index e37a724cd1eb..000000000000
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/memblock.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
-                struct meminfo *mi)
-{
-        for (; tag->hdr.size; tag = tag_next(tag))
-                if (tag->hdr.tag == ATAG_MEM &&
-                                tag->u.mem.start == 0x40200000) {
-                        tag->u.mem.start = 0x40000000;
-                        tag->u.mem.size += SZ_2M;
-                }
-}
-static void __init msm8x60_reserve(void)
-{
-        memblock_remove(0x40000000, SZ_2M);
-}
-static void __init msm8x60_map_io(void)
-{
-        msm_map_msm8x60_io();
-}
-#ifdef CONFIG_OF
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-        { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
-        {}
-};
-#endif
-static void __init msm8x60_init_irq(void)
-{
-        if (!of_have_populated_dt())
-                gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-                         (void *)MSM_QGIC_CPU_BASE);
-#ifdef CONFIG_OF
-        else
-                of_irq_init(msm_dt_gic_match);
-#endif
-        /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-        writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-        /* RUMI does not adhere to GIC spec by enabling STIs by default.
-         * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
-         */
-        if (!machine_is_msm8x60_sim())
-                writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-}
-static void __init msm8x60_init(void)
-{
-}
-static void __init msm8x60_init_late(void)
-{
-        smd_debugfs_init();
-}
-#ifdef CONFIG_OF
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
-        {}
-};
-static void __init msm8x60_dt_init(void)
-{
-        if (of_machine_is_compatible("qcom,msm8660-surf")) {
-                printk(KERN_INFO "Init surf UART registers\n");
-                msm8x60_init_uart12dm();
-        }
-        of_platform_populate(NULL, of_default_bus_match_table,
-                        msm_auxdata_lookup, NULL);
-}
-static const char *msm8x60_fluid_match[] __initdata = {
-        "qcom,msm8660-fluid",
-        "qcom,msm8660-surf",
-        NULL
-};
-#endif /* CONFIG_OF */
-MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
-        .fixup = msm8x60_fixup,
-        .reserve = msm8x60_reserve,
-        .map_io = msm8x60_map_io,
-        .init_irq = msm8x60_init_irq,
-        .handle_irq = gic_handle_irq,
-        .init_machine = msm8x60_init,
-        .init_late = msm8x60_init_late,
-        .timer = &msm_timer,
-MACHINE_END
-MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
-        .fixup = msm8x60_fixup,
-        .reserve = msm8x60_reserve,
-        .map_io = msm8x60_map_io,
-        .init_irq = msm8x60_init_irq,
-        .handle_irq = gic_handle_irq,
-        .init_machine = msm8x60_init,
-        .init_late = msm8x60_init_late,
-        .timer = &msm_timer,
-MACHINE_END
-MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
-        .fixup = msm8x60_fixup,
-        .reserve = msm8x60_reserve,
-        .map_io = msm8x60_map_io,
-        .init_irq = msm8x60_init_irq,
-        .handle_irq = gic_handle_irq,
-        .init_machine = msm8x60_init,
-        .init_late = msm8x60_init_late,
-        .timer = &msm_timer,
-MACHINE_END
-MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
-        .fixup = msm8x60_fixup,
-        .reserve = msm8x60_reserve,
-        .map_io = msm8x60_map_io,
-        .init_irq = msm8x60_init_irq,
-        .handle_irq = gic_handle_irq,
-        .init_machine = msm8x60_init,
-        .init_late = msm8x60_init_late,
-        .timer = &msm_timer,
-MACHINE_END
-#ifdef CONFIG_OF
-/* TODO: General device tree support for all MSM. */
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-        .map_io = msm8x60_map_io,
-        .init_irq = msm8x60_init_irq,
-        .init_machine = msm8x60_dt_init,
-        .init_late = msm8x60_init_late,
-        .timer = &msm_timer,
-        .dt_compat = msm8x60_fluid_match,
-MACHINE_END
-#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index c8fe0edb9761..b16b71abf5f6 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -35,8 +35,7 @@
 #include <mach/mmc.h>
 #include "devices.h"
+#include "common.h"
-extern struct sys_timer msm_timer;
 static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
 static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
@@ -201,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
        .init_irq = qsd8x50_init_irq,
        .init_machine = qsd8x50_init,
        .init_late = qsd8x50_init_late,
-        .timer = &msm_timer,
+        .timer = &qsd8x50_timer,
 MACHINE_END
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
@@ -210,5 +209,5 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
        .init_irq = qsd8x50_init_irq,
        .init_machine = qsd8x50_init,
        .init_late = qsd8x50_init_late,
-        .timer = &msm_timer,
+        .timer = &qsd8x50_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index bbe13f12fa01..4ba0800e243e 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -31,6 +31,7 @@
 #include "devices.h"
 #include "board-trout.h"
+#include "common.h"
 extern int trout_init_mmc(unsigned int);
@@ -42,8 +43,6 @@ static struct platform_device *devices[] __initdata = {
        &msm_device_i2c,
 };
-extern struct sys_timer msm_timer;
 static void __init trout_init_early(void)
 {
        arch_ioremap_caller = __msm_ioremap_caller;
@@ -111,5 +110,5 @@ MACHINE_START(TROUT, "HTC Dream")
        .init_irq       = trout_init_irq,
        .init_machine   = trout_init,
        .init_late      = trout_init_late,
-        .timer          = &msm_timer,
+        .timer          = &msm7x01_timer,
 MACHINE_END
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
new file mode 100644
index 000000000000..d68e5d7854f5
--- /dev/null
+++ b/arch/arm/mach-msm/common.h
@@ -0,0 +1,30 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_COMMON_H
+#define __MACH_COMMON_H
+extern struct sys_timer msm7x01_timer;
+extern struct sys_timer msm7x30_timer;
+extern struct sys_timer msm_dt_timer;
+extern struct sys_timer qsd8x50_timer;
+extern void msm_map_common_io(void);
+extern void msm_map_msm7x30_io(void);
+extern void msm_map_msm8x60_io(void);
+extern void msm_map_msm8960_io(void);
+extern void msm_map_qsd8x50_io(void);
+extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
+                                          unsigned int mtype, void *caller);
+#endif
diff --git a/arch/arm/mach-msm/devices-msm8960.c b/arch/arm/mach-msm/devices-msm8960.c
deleted file mode 100644
index d9e1f26475de..000000000000
--- a/arch/arm/mach-msm/devices-msm8960.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs-8960.h>
-#include <mach/board.h>
-#include "devices.h"
-#define MSM_GSBI2_PHYS          0x16100000
-#define MSM_UART2DM_PHYS        (MSM_GSBI2_PHYS + 0x40000)
-#define MSM_GSBI5_PHYS          0x16400000
-#define MSM_UART5DM_PHYS        (MSM_GSBI5_PHYS + 0x40000)
-static struct resource resources_uart_gsbi2[] = {
-        {
-                .start  = GSBI2_UARTDM_IRQ,
-                .end    = GSBI2_UARTDM_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-        {
-                .start  = MSM_UART2DM_PHYS,
-                .end    = MSM_UART2DM_PHYS + PAGE_SIZE - 1,
-                .name   = "uart_resource",
-                .flags  = IORESOURCE_MEM,
-        },
-        {
-                .start  = MSM_GSBI2_PHYS,
-                .end    = MSM_GSBI2_PHYS + PAGE_SIZE - 1,
-                .name   = "gsbi_resource",
-                .flags  = IORESOURCE_MEM,
-        },
-};
-struct platform_device msm8960_device_uart_gsbi2 = {
-        .name   = "msm_serial",
-        .id     = 0,
-        .num_resources  = ARRAY_SIZE(resources_uart_gsbi2),
-        .resource       = resources_uart_gsbi2,
-};
-static struct resource resources_uart_gsbi5[] = {
-        {
-                .start  = GSBI5_UARTDM_IRQ,
-                .end    = GSBI5_UARTDM_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-        {
-                .start  = MSM_UART5DM_PHYS,
-                .end    = MSM_UART5DM_PHYS + PAGE_SIZE - 1,
-                .name   = "uart_resource",
-                .flags  = IORESOURCE_MEM,
-        },
-        {
-                .start  = MSM_GSBI5_PHYS,
-                .end    = MSM_GSBI5_PHYS + PAGE_SIZE - 1,
-                .name   = "gsbi_resource",
-                .flags  = IORESOURCE_MEM,
-        },
-};
-struct platform_device msm8960_device_uart_gsbi5 = {
-        .name   = "msm_serial",
-        .id     = 0,
-        .num_resources  = ARRAY_SIZE(resources_uart_gsbi5),
-        .resource       = resources_uart_gsbi5,
-};
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 5a0811a4c851..0a0c393d8e31 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -24,12 +24,9 @@
 struct clk_lookup;
-extern struct sys_timer msm_timer;
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
 void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks);
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
index 6c4046c21296..67dc0e98b958 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
@@ -105,11 +105,4 @@
 #define MSM_AD5_PHYS          0xAC000000
 #define MSM_AD5_SIZE          (SZ_1M*13)
-#ifndef __ASSEMBLY__
-extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
-                                          unsigned int mtype, void *caller);
-#endif
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index f944fe65a657..198202c267c8 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -100,8 +100,4 @@
 #define MSM_HSUSB_PHYS        0xA3600000
 #define MSM_HSUSB_SIZE        SZ_1K
-#ifndef __ASSEMBLY__
-extern void msm_map_msm7x30_io(void);
-#endif
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
index a1752c0284fc..9819a556acae 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
@@ -46,12 +46,8 @@
 #define MSM8960_TMR0_SIZE       SZ_4K
 #ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE     0xE1040000
+#define MSM_DEBUG_UART_BASE     0xF0040000
 #define MSM_DEBUG_UART_PHYS     0x16440000
 #endif
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8960_io(void);
-#endif
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
index da77cc1d545d..0faa894729b7 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -122,8 +122,4 @@
 #define MSM_SDC4_PHYS          0xA0600000
 #define MSM_SDC4_SIZE          SZ_4K
-#ifndef __ASSEMBLY__
-extern void msm_map_qsd8x50_io(void);
-#endif
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 5aed57dc808c..c6d38f1d0c98 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -63,12 +63,8 @@
 #define MSM8X60_TMR0_SIZE       SZ_4K
 #ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE     0xE1040000
+#define MSM_DEBUG_UART_BASE     0xF0040000
 #define MSM_DEBUG_UART_PHYS     0x19C40000
 #endif
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8x60_io(void);
-#endif
 #endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 97042331cfc7..3854f6f20ce2 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -29,29 +29,32 @@
 #include <mach/board.h>
-#define MSM_CHIP_DEVICE(name, chip) {                         \
+#include "common.h"
+#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) {                          \
                .virtual = (unsigned long) MSM_##name##_BASE, \
                .pfn = __phys_to_pfn(chip##_##name##_PHYS), \
                .length = chip##_##name##_SIZE, \
-                .type = MT_DEVICE_NONSHARED, \
+                .type = mem_type, \
         }
+#define MSM_DEVICE_TYPE(name, mem_type) \
+                MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
+#define MSM_CHIP_DEVICE(name, chip) \
+                MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
 #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
 #if defined(CONFIG_ARCH_MSM7X00A)
 static struct map_desc msm_io_desc[] __initdata = {
-        MSM_DEVICE(VIC),
+        MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
-        MSM_CHIP_DEVICE(CSR, MSM7X00),
+        MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
-        MSM_DEVICE(DMOV),
+        MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
-        MSM_CHIP_DEVICE(GPIO1, MSM7X00),
+        MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
-        MSM_CHIP_DEVICE(GPIO2, MSM7X00),
+        MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
-        MSM_DEVICE(CLK_CTL),
+        MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
 #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
        defined(CONFIG_DEBUG_MSM_UART3)
-        MSM_DEVICE(DEBUG_UART),
+        MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
-#endif
-#ifdef CONFIG_ARCH_MSM7X30
-        MSM_DEVICE(GCC),
 #endif
        {
                .virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index e012dc8391cf..2d791e6b4ad1 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -22,17 +22,12 @@
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
-#include <mach/msm_iomap.h>
 #include "scm-boot.h"
 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
 #define SCSS_CPU1CORE_RESET 0xD80
 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
 extern void msm_secondary_startup(void);
 /*
 * control for which core is the next to come out of the secondary
@@ -50,9 +45,6 @@ static inline int get_core_count(void)
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-        /* Configure edge-triggered PPIs */
-        writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
        /*
         * if any interrupts are already enabled for the primary
         * core (e.g. timer irq), then they will not have been enabled
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 004f93515a4e..476549a8a709 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -1,7 +1,7 @@
 /*
 *
 * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
@@ -20,15 +20,16 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 #include <asm/sched_clock.h>
-#include <mach/msm_iomap.h>
+#include "common.h"
-#include <mach/cpu.h>
-#include <mach/board.h>
 #define TIMER_MATCH_VAL         0x0000
 #define TIMER_COUNT_VAL         0x0004
@@ -36,7 +37,6 @@
 #define TIMER_ENABLE_CLR_ON_MATCH_EN    BIT(1)
 #define TIMER_ENABLE_EN                 BIT(0)
 #define TIMER_CLEAR             0x000C
-#define DGT_CLK_CTL             0x0034
 #define DGT_CLK_CTL_DIV_4       0x3
 #define GPT_HZ 32768
@@ -151,7 +151,7 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
        *__this_cpu_ptr(msm_evt.percpu_evt) = evt;
        clockevents_register_device(evt);
-        enable_percpu_irq(evt->irq, 0);
+        enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
        return 0;
 }
@@ -172,44 +172,21 @@ static notrace u32 msm_sched_clock_read(void)
        return msm_clocksource.read(&msm_clocksource);
 }
-static void __init msm_timer_init(void)
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+                                  bool percpu)
 {
        struct clock_event_device *ce = &msm_clockevent;
        struct clocksource *cs = &msm_clocksource;
        int res;
-        u32 dgt_hz;
-        if (cpu_is_msm7x01()) {
-                event_base = MSM_CSR_BASE;
-                source_base = MSM_CSR_BASE + 0x10;
-                dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */
-                cs->read = msm_read_timer_count_shift;
-                cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
-        } else if (cpu_is_msm7x30()) {
-                event_base = MSM_CSR_BASE + 0x04;
-                source_base = MSM_CSR_BASE + 0x24;
-                dgt_hz = 24576000 / 4;
-        } else if (cpu_is_qsd8x50()) {
-                event_base = MSM_CSR_BASE;
-                source_base = MSM_CSR_BASE + 0x10;
-                dgt_hz = 19200000 / 4;
-        } else if (cpu_is_msm8x60() || cpu_is_msm8960()) {
-                event_base = MSM_TMR_BASE + 0x04;
-                /* Use CPU0's timer as the global clock source. */
-                source_base = MSM_TMR0_BASE + 0x24;
-                dgt_hz = 27000000 / 4;
-                writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
-        } else
-                BUG();
        writel_relaxed(0, event_base + TIMER_ENABLE);
        writel_relaxed(0, event_base + TIMER_CLEAR);
        writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
        ce->cpumask = cpumask_of(0);
+        ce->irq = irq;
-        ce->irq = INT_GP_TIMER_EXP;
        clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
-        if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+        if (percpu) {
                msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
                if (!msm_evt.percpu_evt) {
                        pr_err("memory allocation failed for %s\n", ce->name);
@@ -219,7 +196,7 @@ static void __init msm_timer_init(void)
                res = request_percpu_irq(ce->irq, msm_timer_interrupt,
                                         ce->name, msm_evt.percpu_evt);
                if (!res) {
-                        enable_percpu_irq(ce->irq, 0);
+                        enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING);
 #ifdef CONFIG_LOCAL_TIMERS
                        local_timer_register(&msm_local_timer_ops);
 #endif
@@ -238,10 +215,143 @@ err:
        res = clocksource_register_hz(cs, dgt_hz);
        if (res)
                pr_err("clocksource_register failed\n");
-        setup_sched_clock(msm_sched_clock_read,
+        setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
-                        cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz);
 }
-struct sys_timer msm_timer = {
+#ifdef CONFIG_OF
-        .init = msm_timer_init
+static const struct of_device_id msm_dgt_match[] __initconst = {
+        { .compatible = "qcom,msm-dgt" },
+        { },
+};
+static const struct of_device_id msm_gpt_match[] __initconst = {
+        { .compatible = "qcom,msm-gpt" },
+        { },
+};
+static void __init msm_dt_timer_init(void)
+{
+        struct device_node *np;
+        u32 freq;
+        int irq;
+        struct resource res;
+        u32 percpu_offset;
+        void __iomem *dgt_clk_ctl;
+        np = of_find_matching_node(NULL, msm_gpt_match);
+        if (!np) {
+                pr_err("Can't find GPT DT node\n");
+                return;
+        }
+        event_base = of_iomap(np, 0);
+        if (!event_base) {
+                pr_err("Failed to map event base\n");
+                return;
+        }
+        irq = irq_of_parse_and_map(np, 0);
+        if (irq <= 0) {
+                pr_err("Can't get irq\n");
+                return;
+        }
+        of_node_put(np);
+        np = of_find_matching_node(NULL, msm_dgt_match);
+        if (!np) {
+                pr_err("Can't find DGT DT node\n");
+                return;
+        }
+        if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+                percpu_offset = 0;
+        if (of_address_to_resource(np, 0, &res)) {
+                pr_err("Failed to parse DGT resource\n");
+                return;
+        }
+        source_base = ioremap(res.start + percpu_offset, resource_size(&res));
+        if (!source_base) {
+                pr_err("Failed to map source base\n");
+                return;
+        }
+        if (!of_address_to_resource(np, 1, &res)) {
+                dgt_clk_ctl = ioremap(res.start + percpu_offset,
+                                      resource_size(&res));
+                if (!dgt_clk_ctl) {
+                        pr_err("Failed to map DGT control base\n");
+                        return;
+                }
+                writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl);
+                iounmap(dgt_clk_ctl);
+        }
+        if (of_property_read_u32(np, "clock-frequency", &freq)) {
+                pr_err("Unknown frequency\n");
+                return;
+        }
+        of_node_put(np);
+        msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+struct sys_timer msm_dt_timer = {
+        .init = msm_dt_timer_init
+};
+#endif
+static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
+{
+        event_base = ioremap(event, SZ_64);
+        if (!event_base) {
+                pr_err("Failed to map event base\n");
+                return 1;
+        }
+        source_base = ioremap(source, SZ_64);
+        if (!source_base) {
+                pr_err("Failed to map source base\n");
+                return 1;
+        }
+        return 0;
+}
+static void __init msm7x01_timer_init(void)
+{
+        struct clocksource *cs = &msm_clocksource;
+        if (msm_timer_map(0xc0100000, 0xc0100010))
+                return;
+        cs->read = msm_read_timer_count_shift;
+        cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+        /* 600 KHz */
+        msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+                        false);
+}
+struct sys_timer msm7x01_timer = {
+        .init = msm7x01_timer_init
+};
+static void __init msm7x30_timer_init(void)
+{
+        if (msm_timer_map(0xc0100004, 0xc0100024))
+                return;
+        msm_timer_init(24576000 / 4, 32, 1, false);
+}
+struct sys_timer msm7x30_timer = {
+        .init = msm7x30_timer_init
+};
+static void __init qsd8x50_timer_init(void)
+{
+        if (msm_timer_map(0xAC100000, 0xAC100010))
+                return;
+        msm_timer_init(19200000 / 4, 32, 7, false);
+}
+struct sys_timer qsd8x50_timer = {
+        .init = qsd8x50_timer_init
 };
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 9a8bbda195b2..ecc431909d6f 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -1,7 +1,5 @@
 if ARCH_MXS
-source "arch/arm/mach-mxs/devices/Kconfig"
 config SOC_IMX23
        bool
        select ARM_AMBA
@@ -27,91 +25,4 @@ config MACH_MXS_DT
          Include support for Freescale MXS platforms(i.MX23 and i.MX28)
          using the device tree for discovery
-config MACH_STMP378X_DEVB
-        bool "Support STMP378x_devb Platform"
-        select SOC_IMX23
-        select MXS_HAVE_AMBA_DUART
-        select MXS_HAVE_PLATFORM_AUART
-        select MXS_HAVE_PLATFORM_MXS_MMC
-        select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-        help
-          Include support for STMP378x-devb platform. This includes specific
-          configurations for the board and its peripherals.
-config MACH_MX23EVK
-        bool "Support MX23EVK Platform"
-        select SOC_IMX23
-        select MXS_HAVE_AMBA_DUART
-        select MXS_HAVE_PLATFORM_AUART
-        select MXS_HAVE_PLATFORM_MXS_MMC
-        select MXS_HAVE_PLATFORM_MXSFB
-        select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-        help
-          Include support for MX23EVK platform. This includes specific
-          configurations for the board and its peripherals.
-config MACH_MX28EVK
-        bool "Support MX28EVK Platform"
-        select SOC_IMX28
-        select LEDS_GPIO_REGISTER
-        select MXS_HAVE_AMBA_DUART
-        select MXS_HAVE_PLATFORM_AUART
-        select MXS_HAVE_PLATFORM_FEC
-        select MXS_HAVE_PLATFORM_FLEXCAN
-        select MXS_HAVE_PLATFORM_MXS_MMC
-        select MXS_HAVE_PLATFORM_MXSFB
-        select MXS_HAVE_PLATFORM_MXS_SAIF
-        select MXS_HAVE_PLATFORM_MXS_I2C
-        select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-        help
-          Include support for MX28EVK platform. This includes specific
-          configurations for the board and its peripherals.
-config MODULE_TX28
-        bool
-        select SOC_IMX28
-        select LEDS_GPIO_REGISTER
-        select MXS_HAVE_AMBA_DUART
-        select MXS_HAVE_PLATFORM_AUART
-        select MXS_HAVE_PLATFORM_FEC
-        select MXS_HAVE_PLATFORM_MXS_I2C
-        select MXS_HAVE_PLATFORM_MXS_MMC
-        select MXS_HAVE_PLATFORM_MXS_PWM
-        select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-config MODULE_M28
-        bool
-        select SOC_IMX28
-        select LEDS_GPIO_REGISTER
-        select MXS_HAVE_AMBA_DUART
-        select MXS_HAVE_PLATFORM_AUART
-        select MXS_HAVE_PLATFORM_FEC
-        select MXS_HAVE_PLATFORM_FLEXCAN
-        select MXS_HAVE_PLATFORM_MXS_I2C
-        select MXS_HAVE_PLATFORM_MXS_MMC
-        select MXS_HAVE_PLATFORM_MXSFB
-config MODULE_APX4
-        bool
-        select SOC_IMX28
-        select LEDS_GPIO_REGISTER
-        select MXS_HAVE_AMBA_DUART
-        select MXS_HAVE_PLATFORM_AUART
-        select MXS_HAVE_PLATFORM_FEC
-        select MXS_HAVE_PLATFORM_MXS_I2C
-        select MXS_HAVE_PLATFORM_MXS_MMC
-        select MXS_HAVE_PLATFORM_MXS_SAIF
-config MACH_TX28
-        bool "Ka-Ro TX28 module"
-        select MODULE_TX28
-config MACH_M28EVK
-        bool "Support DENX M28EVK Platform"
-        select MODULE_M28
-config MACH_APX4DEVKIT
-        bool "Support Bluegiga APX4 Development Kit"
-        select MODULE_APX4
 endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index fed3695a1339..3d3c8a973062 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,15 +1,6 @@
 # Common support
-obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
+obj-y := icoll.o ocotp.o system.o timer.o mm.o
 obj-$(CONFIG_PM) += pm.o
 obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
-obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
-obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
-obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
-obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
-obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
-obj-$(CONFIG_MODULE_TX28) += module-tx28.o
-obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
-obj-y += devices/
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
index 4582999cf080..8bd23a8558db 100644
--- a/arch/arm/mach-mxs/Makefile.boot
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -5,6 +5,7 @@ dtb-y += imx23-evk.dtb \
         imx23-stmp378x_devb.dtb \
         imx28-apx4devkit.dtb \
         imx28-cfa10036.dtb \
+         imx28-cfa10049.dtb \
         imx28-evk.dtb \
         imx28-m28evk.dtb \
         imx28-tx28.dtb \
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
deleted file mode 100644
index 9ee5cede3d42..000000000000
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx23.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-static inline int mx23_add_duart(void)
-{
-        struct amba_device *d;
-        d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
-                                MX23_INT_DUART, 0, 0, 0);
-        return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-extern const struct mxs_auart_data mx23_auart_data[] __initconst;
-#define mx23_add_auart(id)      mxs_add_auart(&mx23_auart_data[id])
-#define mx23_add_auart0()               mx23_add_auart(0)
-#define mx23_add_auart1()               mx23_add_auart(1)
-extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
-#define mx23_add_gpmi_nand(pdata)       \
-        mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
-extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
-#define mx23_add_mxs_mmc(id, pdata) \
-        mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
-#define mx23_add_mxs_pwm(id)            mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
-struct platform_device *__init mx23_add_mxsfb(
-                const struct mxsfb_platform_data *pdata);
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
deleted file mode 100644
index fcab431060f4..000000000000
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#include <linux/amba/bus.h>
-static inline int mx28_add_duart(void)
-{
-        struct amba_device *d;
-        d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
-                                MX28_INT_DUART, 0, 0, 0);
-        return IS_ERR(d) ? PTR_ERR(d) : 0;
-}
-extern const struct mxs_auart_data mx28_auart_data[] __initconst;
-#define mx28_add_auart(id)      mxs_add_auart(&mx28_auart_data[id])
-#define mx28_add_auart0()               mx28_add_auart(0)
-#define mx28_add_auart1()               mx28_add_auart(1)
-#define mx28_add_auart2()               mx28_add_auart(2)
-#define mx28_add_auart3()               mx28_add_auart(3)
-#define mx28_add_auart4()               mx28_add_auart(4)
-extern const struct mxs_fec_data mx28_fec_data[] __initconst;
-#define mx28_add_fec(id, pdata) \
-        mxs_add_fec(&mx28_fec_data[id], pdata)
-extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
-#define mx28_add_flexcan(id, pdata)     \
-        mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
-#define mx28_add_flexcan0(pdata)        mx28_add_flexcan(0, pdata)
-#define mx28_add_flexcan1(pdata)        mx28_add_flexcan(1, pdata)
-extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
-#define mx28_add_gpmi_nand(pdata)       \
-        mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
-extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
-#define mx28_add_mxs_i2c(id)            mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
-extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
-#define mx28_add_mxs_mmc(id, pdata) \
-        mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
-#define mx28_add_mxs_pwm(id)            mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
-struct platform_device *__init mx28_add_mxsfb(
-                const struct mxsfb_platform_data *pdata);
-extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id, pdata) \
-        mxs_add_saif(&mx28_saif_data[id], pdata)
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
deleted file mode 100644
index cf50b5a66dda..000000000000
--- a/arch/arm/mach-mxs/devices.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-struct platform_device *__init mxs_add_platform_device_dmamask(
-                const char *name, int id,
-                const struct resource *res, unsigned int num_resources,
-                const void *data, size_t size_data, u64 dmamask)
-{
-        int ret = -ENOMEM;
-        struct platform_device *pdev;
-        pdev = platform_device_alloc(name, id);
-        if (!pdev)
-                goto err;
-        if (dmamask) {
-                /*
-                 * This memory isn't freed when the device is put,
-                 * I don't have a nice idea for that though.  Conceptually
-                 * dma_mask in struct device should not be a pointer.
-                 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
-                 */
-                pdev->dev.dma_mask =
-                        kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
-                if (!pdev->dev.dma_mask)
-                        /* ret is still -ENOMEM; */
-                        goto err;
-                *pdev->dev.dma_mask = dmamask;
-                pdev->dev.coherent_dma_mask = dmamask;
-        }
-        if (res) {
-                ret = platform_device_add_resources(pdev, res, num_resources);
-                if (ret)
-                        goto err;
-        }
-        if (data) {
-                ret = platform_device_add_data(pdev, data, size_data);
-                if (ret)
-                        goto err;
-        }
-        ret = platform_device_add(pdev);
-        if (ret) {
-err:
-                if (dmamask)
-                        kfree(pdev->dev.dma_mask);
-                platform_device_put(pdev);
-                return ERR_PTR(ret);
-        }
-        return pdev;
-}
-struct device mxs_apbh_bus = {
-        .init_name      = "mxs_apbh",
-        .parent         = &platform_bus,
-};
-static int __init mxs_device_init(void)
-{
-        return device_register(&mxs_apbh_bus);
-}
-core_initcall(mxs_device_init);
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
deleted file mode 100644
index 19659de1c4e8..000000000000
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-config MXS_HAVE_AMBA_DUART
-        bool
-config MXS_HAVE_PLATFORM_AUART
-        bool
-config MXS_HAVE_PLATFORM_FEC
-        bool
-config MXS_HAVE_PLATFORM_FLEXCAN
-        select HAVE_CAN_FLEXCAN if CAN
-        bool
-config MXS_HAVE_PLATFORM_GPMI_NAND
-        bool
-config MXS_HAVE_PLATFORM_MXS_I2C
-        bool
-config MXS_HAVE_PLATFORM_MXS_MMC
-        bool
-config MXS_HAVE_PLATFORM_MXS_PWM
-        bool
-config MXS_HAVE_PLATFORM_MXSFB
-        bool
-config MXS_HAVE_PLATFORM_MXS_SAIF
-        bool
-config MXS_HAVE_PLATFORM_RTC_STMP3XXX
-        bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
deleted file mode 100644
index 5f72d9787444..000000000000
--- a/arch/arm/mach-mxs/devices/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
-obj-y += platform-dma.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
-obj-y += platform-gpio-mxs.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c
deleted file mode 100644
index 27608f5d2ac8..000000000000
--- a/arch/arm/mach-mxs/devices/platform-auart.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#define mxs_auart_data_entry_single(soc, _id, hwid)                     \
-        {                                                               \
-                .id = _id,                                              \
-                .iobase = soc ## _AUART ## hwid ## _BASE_ADDR,          \
-                .irq = soc ## _INT_AUART ## hwid,                       \
-        }
-#define mxs_auart_data_entry(soc, _id, hwid)                            \
-        [_id] = mxs_auart_data_entry_single(soc, _id, hwid)
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_auart_data mx23_auart_data[] __initconst = {
-#define mx23_auart_data_entry(_id, hwid)                                \
-        mxs_auart_data_entry(MX23, _id, hwid)
-        mx23_auart_data_entry(0, 1),
-        mx23_auart_data_entry(1, 2),
-};
-#endif
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_auart_data mx28_auart_data[] __initconst = {
-#define mx28_auart_data_entry(_id)                                      \
-        mxs_auart_data_entry(MX28, _id, _id)
-        mx28_auart_data_entry(0),
-        mx28_auart_data_entry(1),
-        mx28_auart_data_entry(2),
-        mx28_auart_data_entry(3),
-        mx28_auart_data_entry(4),
-};
-#endif
-struct platform_device *__init mxs_add_auart(
-                const struct mxs_auart_data *data)
-{
-        struct resource res[] = {
-                {
-                        .start = data->iobase,
-                        .end = data->iobase + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = data->irq,
-                        .end = data->irq,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device_dmamask("mxs-auart", data->id,
-                                        res, ARRAY_SIZE(res), NULL, 0,
-                                        DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c
deleted file mode 100644
index 46824501de00..000000000000
--- a/arch/arm/mach-mxs/devices/platform-dma.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-struct platform_device *__init mxs_add_dma(const char *devid,
-                                                resource_size_t base)
-{
-        struct resource res[] = {
-                {
-                        .start = base,
-                        .end = base + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                }
-        };
-        return mxs_add_platform_device_dmamask(devid, -1,
-                                res, ARRAY_SIZE(res), NULL, 0,
-                                DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c
deleted file mode 100644
index ae96a4fd8f14..000000000000
--- a/arch/arm/mach-mxs/devices/platform-fec.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#define mxs_fec_data_entry_single(soc, _id)                             \
-        {                                                               \
-                .id = _id,                                              \
-                .iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR,        \
-                .irq = soc ## _INT_ENET_MAC ## _id,                     \
-        }
-#define mxs_fec_data_entry(soc, _id)                                    \
-        [_id] = mxs_fec_data_entry_single(soc, _id)
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_fec_data mx28_fec_data[] __initconst = {
-#define mx28_fec_data_entry(_id)                                        \
-        mxs_fec_data_entry(MX28, _id)
-        mx28_fec_data_entry(0),
-        mx28_fec_data_entry(1),
-};
-#endif
-struct platform_device *__init mxs_add_fec(
-                const struct mxs_fec_data *data,
-                const struct fec_platform_data *pdata)
-{
-        struct resource res[] = {
-                {
-                        .start = data->iobase,
-                        .end = data->iobase + SZ_16K - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = data->irq,
-                        .end = data->irq,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device_dmamask("imx28-fec", data->id,
-                        res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
-                        DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c
deleted file mode 100644
index 43a6b4bae6fe..000000000000
--- a/arch/arm/mach-mxs/devices/platform-flexcan.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2010, 2011 Pengutronix,
- *                          Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)           \
-        {                                                               \
-                .id = _id,                                              \
-                .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,           \
-                .iosize = _size,                                        \
-                .irq = soc ## _INT_CAN ## _hwid,                        \
-        }
-#define mxs_flexcan_data_entry(soc, _id, _hwid, _size)                  \
-        [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
-#define mx28_flexcan_data_entry(_id, _hwid)                             \
-        mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
-        mx28_flexcan_data_entry(0, 0),
-        mx28_flexcan_data_entry(1, 1),
-};
-#endif /* ifdef CONFIG_SOC_IMX28 */
-struct platform_device *__init mxs_add_flexcan(
-                const struct mxs_flexcan_data *data,
-                const struct flexcan_platform_data *pdata)
-{
-        struct resource res[] = {
-                {
-                        .start = data->iobase,
-                        .end = data->iobase + data->iosize - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = data->irq,
-                        .end = data->irq,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device("flexcan", data->id,
-                        res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
deleted file mode 100644
index cd99f19ec637..000000000000
--- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-struct platform_device *__init mxs_add_gpio(
-        char *name, int id, resource_size_t iobase, int irq)
-{
-        struct resource res[] = {
-                {
-                        .start = iobase,
-                        .end = iobase + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = irq,
-                        .end = irq,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return platform_device_register_resndata(&mxs_apbh_bus,
-                        name, id, res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
deleted file mode 100644
index 3e22df5944a8..000000000000
--- a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/dma-mapping.h>
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
-        .devid = "imx23-gpmi-nand",
-        .res = {
-                /* GPMI */
-                DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
-                                        GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-                DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
-                                        GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-                /* BCH */
-                DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
-                                        GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-                DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
-                                        GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-                /* DMA */
-                DEFINE_RES_NAMED(MX23_DMA_GPMI0,
-                                        MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
-                                        GPMI_NAND_DMA_CHANNELS_RES_NAME,
-                                        IORESOURCE_DMA),
-                DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
-                                        GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-        },
-};
-#endif
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
-        .devid = "imx28-gpmi-nand",
-        .res = {
-                /* GPMI */
-                DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
-                                        GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-                DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
-                                        GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-                /* BCH */
-                DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
-                                        GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-                DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
-                                        GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-                /* DMA */
-                DEFINE_RES_NAMED(MX28_DMA_GPMI0,
-                                        MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
-                                        GPMI_NAND_DMA_CHANNELS_RES_NAME,
-                                        IORESOURCE_DMA),
-                DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
-                                        GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-        },
-};
-#endif
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-                const struct mxs_gpmi_nand_data *data)
-{
-        return mxs_add_platform_device_dmamask(data->devid, -1,
-                                data->res, GPMI_NAND_RES_SIZE,
-                                pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
deleted file mode 100644
index 79222ec8ede1..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix
- * Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#define mxs_i2c_data_entry_single(soc, _id)                             \
-        {                                                               \
-                .id = _id,                                              \
-                .iobase = soc ## _I2C ## _id ## _BASE_ADDR,             \
-                .errirq = soc ## _INT_I2C ## _id ## _ERROR,             \
-                .dmairq = soc ## _INT_I2C ## _id ## _DMA,               \
-        }
-#define mxs_i2c_data_entry(soc, _id)                                    \
-        [_id] = mxs_i2c_data_entry_single(soc, _id)
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
-        mxs_i2c_data_entry(MX28, 0),
-        mxs_i2c_data_entry(MX28, 1),
-};
-#endif
-struct platform_device *__init mxs_add_mxs_i2c(
-                const struct mxs_mxs_i2c_data *data)
-{
-        struct resource res[] = {
-                {
-                        .start = data->iobase,
-                        .end = data->iobase + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = data->errirq,
-                        .end = data->errirq,
-                        .flags = IORESOURCE_IRQ,
-                }, {
-                        .start = data->dmairq,
-                        .end = data->dmairq,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device("mxs-i2c", data->id, res,
-                                        ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
deleted file mode 100644
index b33c9d05c552..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)           \
-        {                                                               \
-                .devid = _devid,                                        \
-                .id = _id,                                              \
-                .iobase = soc ## _SSP ## hwid ## _BASE_ADDR,            \
-                .dma = soc ## _DMA_SSP ## hwid,                         \
-                .irq_err = soc ## _INT_SSP ## hwid ## _ERROR,           \
-                .irq_dma = soc ## _INT_SSP ## hwid ## _DMA,             \
-        }
-#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid)                  \
-        [_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid)
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
-        mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1),
-        mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2),
-};
-#endif
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
-        mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0),
-        mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1),
-        mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2),
-        mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3),
-};
-#endif
-struct platform_device *__init mxs_add_mxs_mmc(
-                const struct mxs_mxs_mmc_data *data,
-                const struct mxs_mmc_platform_data *pdata)
-{
-        struct resource res[] = {
-                {
-                        .start  = data->iobase,
-                        .end    = data->iobase + SZ_8K - 1,
-                        .flags  = IORESOURCE_MEM,
-                }, {
-                        .start  = data->dma,
-                        .end    = data->dma,
-                        .flags  = IORESOURCE_DMA,
-                }, {
-                        .start  = data->irq_err,
-                        .end    = data->irq_err,
-                        .flags  = IORESOURCE_IRQ,
-                }, {
-                        .start  = data->irq_dma,
-                        .end    = data->irq_dma,
-                        .flags  = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device(data->devid, data->id,
-                        res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
deleted file mode 100644
index 680f5a902936..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/devices-common.h>
-struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
-{
-        struct resource res = {
-                .flags = IORESOURCE_MEM,
-        };
-        res.start = iobase + 0x10 + 0x20 * id;
-        res.end = res.start + 0x1f;
-        return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
deleted file mode 100644
index f6e3a60b4201..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#define mxs_saif_data_entry_single(soc, _id)                            \
-        {                                                               \
-                .id = _id,                                              \
-                .iobase = soc ## _SAIF ## _id ## _BASE_ADDR,            \
-                .irq = soc ## _INT_SAIF ## _id,                         \
-                .dma = soc ## _DMA_SAIF ## _id,                         \
-                .dmairq = soc ## _INT_SAIF ## _id ##_DMA,               \
-        }
-#define mxs_saif_data_entry(soc, _id)                                   \
-        [_id] = mxs_saif_data_entry_single(soc, _id)
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_saif_data mx28_saif_data[] __initconst = {
-        mxs_saif_data_entry(MX28, 0),
-        mxs_saif_data_entry(MX28, 1),
-};
-#endif
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
-                                const struct mxs_saif_platform_data *pdata)
-{
-        struct resource res[] = {
-                {
-                        .start = data->iobase,
-                        .end = data->iobase + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = data->irq,
-                        .end = data->irq,
-                        .flags = IORESOURCE_IRQ,
-                }, {
-                        .start = data->dma,
-                        .end = data->dma,
-                        .flags = IORESOURCE_DMA,
-                }, {
-                        .start = data->dmairq,
-                        .end = data->dmairq,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device("mxs-saif", data->id, res,
-                                ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c
deleted file mode 100644
index 76b53f73418e..000000000000
--- a/arch/arm/mach-mxs/devices/platform-mxsfb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/mxsfb.h>
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_mxsfb(
-                const struct mxsfb_platform_data *pdata)
-{
-        struct resource res[] = {
-                {
-                        .start = MX23_LCDIF_BASE_ADDR,
-                        .end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                },
-        };
-        return mxs_add_platform_device_dmamask("imx23-fb", -1,
-                        res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX23 */
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_mxsfb(
-                const struct mxsfb_platform_data *pdata)
-{
-        struct resource res[] = {
-                {
-                        .start = MX28_LCDIF_BASE_ADDR,
-                        .end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                },
-        };
-        return mxs_add_platform_device_dmamask("imx28-fb", -1,
-                        res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
deleted file mode 100644
index 639eaee15553..000000000000
--- a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
-{
-        struct resource res[] = {
-                {
-                        .start = MX23_RTC_BASE_ADDR,
-                        .end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = MX23_INT_RTC_ALARM,
-                        .end = MX23_INT_RTC_ALARM,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-                                        NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX23 */
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
-{
-        struct resource res[] = {
-                {
-                        .start = MX28_RTC_BASE_ADDR,
-                        .end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
-                        .flags = IORESOURCE_MEM,
-                }, {
-                        .start = MX28_INT_RTC_ALARM,
-                        .end = MX28_INT_RTC_ALARM,
-                        .flags = IORESOURCE_IRQ,
-                },
-        };
-        return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-                                        NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index de6c7ba42544..4dec79563f19 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -17,21 +17,12 @@ extern void mxs_timer_init(int);
 extern void mxs_restart(char, const char *);
 extern int mxs_saif_clkmux_select(unsigned int clkmux);
-extern void mx23_soc_init(void);
 extern int mx23_clocks_init(void);
 extern void mx23_map_io(void);
-extern void mx23_init_irq(void);
-extern void mx28_soc_init(void);
 extern int mx28_clocks_init(void);
 extern void mx28_map_io(void);
-extern void mx28_init_irq(void);
 extern void icoll_init_irq(void);
-extern struct platform_device *mxs_add_dma(const char *devid,
-                                                resource_size_t base);
-extern struct platform_device *mxs_add_gpio(char *name, int id,
-                                            resource_size_t iobase, int irq);
 #endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
deleted file mode 100644
index e8b1d958240b..000000000000
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/amba/bus.h>
-extern struct device mxs_apbh_bus;
-struct platform_device *mxs_add_platform_device_dmamask(
-                const char *name, int id,
-                const struct resource *res, unsigned int num_resources,
-                const void *data, size_t size_data, u64 dmamask);
-static inline struct platform_device *mxs_add_platform_device(
-                const char *name, int id,
-                const struct resource *res, unsigned int num_resources,
-                const void *data, size_t size_data)
-{
-        return mxs_add_platform_device_dmamask(
-                        name, id, res, num_resources, data, size_data, 0);
-}
-/* auart */
-struct mxs_auart_data {
-        int id;
-        resource_size_t iobase;
-        resource_size_t iosize;
-        resource_size_t irq;
-};
-struct platform_device *__init mxs_add_auart(
-                const struct mxs_auart_data *data);
-/* fec */
-#include <linux/fec.h>
-struct mxs_fec_data {
-        int id;
-        resource_size_t iobase;
-        resource_size_t iosize;
-        resource_size_t irq;
-};
-struct platform_device *__init mxs_add_fec(
-                const struct mxs_fec_data *data,
-                const struct fec_platform_data *pdata);
-/* flexcan */
-#include <linux/can/platform/flexcan.h>
-struct mxs_flexcan_data {
-        int id;
-        resource_size_t iobase;
-        resource_size_t iosize;
-        resource_size_t irq;
-};
-struct platform_device *__init mxs_add_flexcan(
-                const struct mxs_flexcan_data *data,
-                const struct flexcan_platform_data *pdata);
-/* gpmi-nand */
-#include <linux/mtd/gpmi-nand.h>
-struct mxs_gpmi_nand_data {
-        const char *devid;
-        const struct resource res[GPMI_NAND_RES_SIZE];
-};
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-                const struct mxs_gpmi_nand_data *data);
-/* i2c */
-struct mxs_mxs_i2c_data {
-        int id;
-        resource_size_t iobase;
-        resource_size_t errirq;
-        resource_size_t dmairq;
-};
-struct platform_device * __init mxs_add_mxs_i2c(
-                const struct mxs_mxs_i2c_data *data);
-/* mmc */
-#include <linux/mmc/mxs-mmc.h>
-struct mxs_mxs_mmc_data {
-        const char *devid;
-        int id;
-        resource_size_t iobase;
-        resource_size_t dma;
-        resource_size_t irq_err;
-        resource_size_t irq_dma;
-};
-struct platform_device *__init mxs_add_mxs_mmc(
-                const struct mxs_mxs_mmc_data *data,
-                const struct mxs_mmc_platform_data *pdata);
-/* pwm */
-struct platform_device *__init mxs_add_mxs_pwm(
-                resource_size_t iobase, int id);
-/* saif */
-#include <sound/saif.h>
-struct mxs_saif_data {
-        int id;
-        resource_size_t iobase;
-        resource_size_t irq;
-        resource_size_t dma;
-        resource_size_t dmairq;
-};
-struct platform_device *__init mxs_add_saif(
-                const struct mxs_saif_data *data,
-                const struct mxs_saif_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
deleted file mode 100644
index b0190a4822f2..000000000000
--- a/arch/arm/mach-mxs/include/mach/iomux-mx23.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_IOMUX_MX23_H__
-#define __MACH_IOMUX_MX23_H__
-#include <mach/iomux.h>
-/*
- * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *                                                                      BANK    PIN     MUX
- */
-/* MUXSEL_0 */
-#define MX23_PAD_GPMI_D00__GPMI_D00             MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D01__GPMI_D01             MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D02__GPMI_D02             MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D03__GPMI_D03             MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D04__GPMI_D04             MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D05__GPMI_D05             MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D06__GPMI_D06             MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D07__GPMI_D07             MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D08__GPMI_D08             MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D09__GPMI_D09             MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D10__GPMI_D10             MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D11__GPMI_D11             MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D12__GPMI_D12             MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D13__GPMI_D13             MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D14__GPMI_D14             MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D15__GPMI_D15             MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CLE__GPMI_CLE             MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_ALE__GPMI_ALE             MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N           MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0           MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1           MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2           MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3           MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WPN__GPMI_WPN             MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WRN__GPMI_WRN             MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDN__GPMI_RDN             MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_CTS__AUART1_CTS         MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RTS__AUART1_RTS         MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RX__AUART1_RX           MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_TX__AUART1_TX           MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SCL__I2C_SCL               MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SDA__I2C_SDA               MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D00__LCD_D00               MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D01__LCD_D01               MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D02__LCD_D02               MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D03__LCD_D03               MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D04__LCD_D04               MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D05__LCD_D05               MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D06__LCD_D06               MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D07__LCD_D07               MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D08__LCD_D08               MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D09__LCD_D09               MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D10__LCD_D10               MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D11__LCD_D11               MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D12__LCD_D12               MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D13__LCD_D13               MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D14__LCD_D14               MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D15__LCD_D15               MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D16__LCD_D16               MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D17__LCD_D17               MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RESET__LCD_RESET           MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RS__LCD_RS                 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_WR__LCD_WR                 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_CS__LCD_CS                 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK           MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE         MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC           MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC           MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX23_PAD_PWM0__PWM0                     MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX23_PAD_PWM1__PWM1                     MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX23_PAD_PWM2__PWM2                     MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX23_PAD_PWM3__PWM3                     MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX23_PAD_PWM4__PWM4                     MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_CMD__SSP1_CMD             MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT       MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0         MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1         MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2         MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3         MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_SCK__SSP1_SCK             MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYA__ROTARYA               MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYB__ROTARYB               MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A00__EMI_A00               MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A01__EMI_A01               MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A02__EMI_A02               MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A03__EMI_A03               MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A04__EMI_A04               MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A05__EMI_A05               MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A06__EMI_A06               MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A07__EMI_A07               MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A08__EMI_A08               MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A09__EMI_A09               MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A10__EMI_A10               MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A11__EMI_A11               MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A12__EMI_A12               MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA0__EMI_BA0               MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA1__EMI_BA1               MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CASN__EMI_CASN             MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE0N__EMI_CE0N             MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE1N__EMI_CE1N             MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N           MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N           MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CKE__EMI_CKE               MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_RASN__EMI_RASN             MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_WEN__EMI_WEN               MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D00__EMI_D00               MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D01__EMI_D01               MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D02__EMI_D02               MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D03__EMI_D03               MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D04__EMI_D04               MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D05__EMI_D05               MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D06__EMI_D06               MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D07__EMI_D07               MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D08__EMI_D08               MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D09__EMI_D09               MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D10__EMI_D10               MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D11__EMI_D11               MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D12__EMI_D12               MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D13__EMI_D13               MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D14__EMI_D14               MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D15__EMI_D15               MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM0__EMI_DQM0             MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM1__EMI_DQM1             MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS0__EMI_DQS0             MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS1__EMI_DQS1             MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLK__EMI_CLK               MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLKN__EMI_CLKN             MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-/* MUXSEL_1 */
-#define MX23_PAD_GPMI_D00__LCD_D8               MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D01__LCD_D9               MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D02__LCD_D10              MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D03__LCD_D11              MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D04__LCD_D12              MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D05__LCD_D13              MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D06__LCD_D14              MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D07__LCD_D15              MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D08__LCD_D18              MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D09__LCD_D19              MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D10__LCD_D20              MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D11__LCD_D21              MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D12__LCD_D22              MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D13__LCD_D23              MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D14__AUART2_RX            MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D15__AUART2_TX            MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CLE__LCD_D16              MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_ALE__LCD_D17              MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CE2N__ATA_A2              MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RTS__IR_CLK             MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RX__IR_RX               MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_TX__IR_TX               MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SCL__GPMI_RDY2             MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SDA__GPMI_CE2N             MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D00__ETM_DA8               MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D01__ETM_DA9               MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D02__ETM_DA10              MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D03__ETM_DA11              MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D04__ETM_DA12              MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D05__ETM_DA13              MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D06__ETM_DA14              MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D07__ETM_DA15              MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D08__ETM_DA0               MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D09__ETM_DA1               MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D10__ETM_DA2               MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D11__ETM_DA3               MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D12__ETM_DA4               MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D13__ETM_DA5               MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D14__ETM_DA6               MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D15__ETM_DA7               MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RESET__ETM_TCTL            MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RS__ETM_TCLK               MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3           MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_ENABLE__I2C_SCL            MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_HSYNC__I2C_SDA             MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY            MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX23_PAD_PWM0__ROTARYA                  MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX23_PAD_PWM1__ROTARYB                  MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX23_PAD_PWM2__GPMI_RDY3                MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX23_PAD_PWM3__ETM_TCTL                 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX23_PAD_PWM4__ETM_TCLK                 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N         MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA1__I2C_SCL            MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA2__I2C_SDA            MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYA__AUART2_RTS            MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYB__AUART2_CTS            MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_1)
-/* MUXSEL_2 */
-#define MX23_PAD_GPMI_D00__SSP2_DATA0           MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D01__SSP2_DATA1           MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D02__SSP2_DATA2           MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D03__SSP2_DATA3           MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D04__SSP2_DATA4           MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D05__SSP2_DATA5           MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D06__SSP2_DATA6           MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D07__SSP2_DATA7           MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D08__SSP1_DATA4           MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D09__SSP1_DATA5           MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D10__SSP1_DATA6           MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D11__SSP1_DATA7           MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D15__GPMI_CE3N            MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT         MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD            MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_WRN__SSP2_SCK             MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4         MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5         MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RX__SSP1_DATA6          MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_TX__SSP1_DATA7          MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SCL__AUART1_TX             MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SDA__AUART1_RX             MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0          MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0          MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK      MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D11__SAIF_LRCLK            MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1          MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2          MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2          MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1          MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK       MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_RESET__GPMI_CE3N           MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX23_PAD_PWM0__DUART_RX                 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
-#define MX23_PAD_PWM1__DUART_TX                 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
-#define MX23_PAD_PWM3__AUART1_CTS               MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX23_PAD_PWM4__AUART1_RTS               MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_CMD__JTAG_TDO             MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID        MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI           MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK          MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK          MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS           MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_SCK__JTAG_TRST            MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYA__SPDIF                 MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYB__GPMI_CE3N             MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
-/* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPIO_0_0             MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPIO_0_1             MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPIO_0_2             MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPIO_0_3             MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPIO_0_4             MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPIO_0_5             MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPIO_0_6             MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPIO_0_7             MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPIO_0_8             MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPIO_0_9             MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPIO_0_10            MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPIO_0_11            MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPIO_0_12            MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPIO_0_13            MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPIO_0_14            MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPIO_0_15            MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPIO_0_16            MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPIO_0_17            MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18           MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19           MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20           MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21           MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22           MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPIO_0_23            MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPIO_0_24            MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPIO_0_25            MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPIO_0_26          MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPIO_0_27          MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPIO_0_28           MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPIO_0_29           MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPIO_0_30             MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPIO_0_31             MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D00__GPIO_1_0              MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPIO_1_1              MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPIO_1_2              MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPIO_1_3              MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPIO_1_4              MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPIO_1_5              MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPIO_1_6              MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPIO_1_7              MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPIO_1_8              MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPIO_1_9              MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPIO_1_10             MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPIO_1_11             MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPIO_1_12             MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPIO_1_13             MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPIO_1_14             MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPIO_1_15             MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPIO_1_16             MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPIO_1_17             MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPIO_1_18           MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPIO_1_19              MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPIO_1_20              MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPIO_1_21              MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22           MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23          MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24           MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25           MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPIO_1_26                MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPIO_1_27                MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPIO_1_28                MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPIO_1_29                MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPIO_1_30                MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_CMD__GPIO_2_0             MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1          MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2           MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3           MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4           MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5           MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPIO_2_6             MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPIO_2_7              MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPIO_2_8              MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPIO_2_9              MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPIO_2_10             MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPIO_2_11             MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPIO_2_12             MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPIO_2_13             MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPIO_2_14             MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPIO_2_15             MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPIO_2_16             MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPIO_2_17             MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPIO_2_18             MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPIO_2_19             MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPIO_2_20             MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPIO_2_21             MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPIO_2_22             MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPIO_2_23             MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPIO_2_24            MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPIO_2_25            MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPIO_2_26            MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27           MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28           MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPIO_2_29             MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPIO_2_30            MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPIO_2_31             MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
-#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h
deleted file mode 100644
index f50fefd10520..000000000000
--- a/arch/arm/mach-mxs/include/mach/iomux-mx28.h
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_IOMUX_MX28_H__
-#define __MACH_IOMUX_MX28_H__
-#include <mach/iomux.h>
-/*
- * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *                                                                      BANK    PIN     MUX
- */
-/* MUXSEL_0 */
-#define MX28_PAD_GPMI_D00__GPMI_D0                      MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D01__GPMI_D1                      MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D02__GPMI_D2                      MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D03__GPMI_D3                      MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D04__GPMI_D4                      MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D05__GPMI_D5                      MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D06__GPMI_D6                      MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D07__GPMI_D7                      MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N                   MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N                   MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N                   MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N                   MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0                 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1                 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2                 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3                 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDN__GPMI_RDN                     MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_WRN__GPMI_WRN                     MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_ALE__GPMI_ALE                     MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CLE__GPMI_CLE                     MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN               MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D00__LCD_D0                        MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D01__LCD_D1                        MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D02__LCD_D2                        MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D03__LCD_D3                        MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D04__LCD_D4                        MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D05__LCD_D5                        MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D06__LCD_D6                        MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D07__LCD_D7                        MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D08__LCD_D8                        MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D09__LCD_D9                        MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D10__LCD_D10                       MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D11__LCD_D11                       MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D12__LCD_D12                       MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D13__LCD_D13                       MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D14__LCD_D14                       MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D15__LCD_D15                       MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D16__LCD_D16                       MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D17__LCD_D17                       MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D18__LCD_D18                       MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D19__LCD_D19                       MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D20__LCD_D20                       MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D21__LCD_D21                       MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D22__LCD_D22                       MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D23__LCD_D23                       MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RD_E__LCD_RD_E                     MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN                 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RS__LCD_RS                         MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_CS__LCD_CS                         MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC                   MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC                   MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK                 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE                 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA0__SSP0_D0                    MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA1__SSP0_D1                    MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA2__SSP0_D2                    MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA3__SSP0_D3                    MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA4__SSP0_D4                    MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA5__SSP0_D5                    MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA6__SSP0_D6                    MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA7__SSP0_D7                    MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_CMD__SSP0_CMD                     MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT          MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_SCK__SSP0_SCK                     MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_SCK__SSP1_SCK                     MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_CMD__SSP1_CMD                     MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA0__SSP1_D0                    MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA3__SSP1_D3                    MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SCK__SSP2_SCK                     MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD                    MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MISO__SSP2_D0                     MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS0__SSP2_D3                      MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS1__SSP2_D4                      MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS2__SSP2_D5                      MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SCK__SSP3_SCK                     MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD                    MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MISO__SSP3_D0                     MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SS0__SSP3_D3                      MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_RX__AUART0_RX                   MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_TX__AUART0_TX                   MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_CTS__AUART0_CTS                 MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_RTS__AUART0_RTS                 MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RX__AUART1_RX                   MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_TX__AUART1_TX                   MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_CTS__AUART1_CTS                 MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RTS__AUART1_RTS                 MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RX__AUART2_RX                   MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_TX__AUART2_TX                   MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_CTS__AUART2_CTS                 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RTS__AUART2_RTS                 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RX__AUART3_RX                   MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_TX__AUART3_TX                   MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_CTS__AUART3_CTS                 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RTS__AUART3_RTS                 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX28_PAD_PWM0__PWM_0                            MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX28_PAD_PWM1__PWM_1                            MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX28_PAD_PWM2__PWM_2                            MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK                 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK               MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK             MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0             MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SCL__I2C0_SCL                     MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SDA__I2C0_SDA                     MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0             MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SPDIF__SPDIF_TX                        MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
-#define MX28_PAD_PWM3__PWM_3                            MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
-#define MX28_PAD_PWM4__PWM_4                            MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RESET__LCD_RESET                   MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_MDC__ENET0_MDC                   MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO                 MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN               MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0                 MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1                 MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK             MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN               MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0                 MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1                 MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2                 MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3                 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2                 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3                 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK             MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_COL__ENET0_COL                   MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_CRS__ENET0_CRS                   MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET                 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK                   MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D00__EMI_DATA0                     MXS_IOMUX_PAD_NAKED(5,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D01__EMI_DATA1                     MXS_IOMUX_PAD_NAKED(5,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D02__EMI_DATA2                     MXS_IOMUX_PAD_NAKED(5,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D03__EMI_DATA3                     MXS_IOMUX_PAD_NAKED(5,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D04__EMI_DATA4                     MXS_IOMUX_PAD_NAKED(5,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D05__EMI_DATA5                     MXS_IOMUX_PAD_NAKED(5,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D06__EMI_DATA6                     MXS_IOMUX_PAD_NAKED(5,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D07__EMI_DATA7                     MXS_IOMUX_PAD_NAKED(5,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D08__EMI_DATA8                     MXS_IOMUX_PAD_NAKED(5,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D09__EMI_DATA9                     MXS_IOMUX_PAD_NAKED(5,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D10__EMI_DATA10                    MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D11__EMI_DATA11                    MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D12__EMI_DATA12                    MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D13__EMI_DATA13                    MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D14__EMI_DATA14                    MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D15__EMI_DATA15                    MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT0__EMI_ODT0                     MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM0__EMI_DQM0                     MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT1__EMI_ODT1                     MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM1__EMI_DQM1                     MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CLK__EMI_CLK                       MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS0__EMI_DQS0                     MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS1__EMI_DQS1                     MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN             MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A00__EMI_ADDR0                     MXS_IOMUX_PAD_NAKED(6,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A01__EMI_ADDR1                     MXS_IOMUX_PAD_NAKED(6,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A02__EMI_ADDR2                     MXS_IOMUX_PAD_NAKED(6,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A03__EMI_ADDR3                     MXS_IOMUX_PAD_NAKED(6,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A04__EMI_ADDR4                     MXS_IOMUX_PAD_NAKED(6,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A05__EMI_ADDR5                     MXS_IOMUX_PAD_NAKED(6,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A06__EMI_ADDR6                     MXS_IOMUX_PAD_NAKED(6,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A07__EMI_ADDR7                     MXS_IOMUX_PAD_NAKED(6,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A08__EMI_ADDR8                     MXS_IOMUX_PAD_NAKED(6,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A09__EMI_ADDR9                     MXS_IOMUX_PAD_NAKED(6,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A10__EMI_ADDR10                    MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A11__EMI_ADDR11                    MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A12__EMI_ADDR12                    MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A13__EMI_ADDR13                    MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A14__EMI_ADDR14                    MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA0__EMI_BA0                       MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA1__EMI_BA1                       MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA2__EMI_BA2                       MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CASN__EMI_CASN                     MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_RASN__EMI_RASN                     MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_WEN__EMI_WEN                       MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE0N__EMI_CE0N                     MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE1N__EMI_CE1N                     MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CKE__EMI_CKE                       MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
-/* MUXSEL_1 */
-#define MX28_PAD_GPMI_D00__SSP1_D0                      MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D01__SSP1_D1                      MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D02__SSP1_D2                      MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D03__SSP1_D3                      MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D04__SSP1_D4                      MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D05__SSP1_D5                      MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D06__SSP1_D6                      MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D07__SSP1_D7                      MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE0N__SSP3_D0                     MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE1N__SSP3_D3                     MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE2N__CAN1_TX                     MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE3N__CAN1_RX                     MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT            MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD                    MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY2__CAN0_TX                     MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY3__CAN0_RX                     MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDN__SSP3_SCK                     MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_WRN__SSP1_SCK                     MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_ALE__SSP3_D1                      MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CLE__SSP3_D2                      MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD                  MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D03__ETM_DA8                       MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D04__ETM_DA9                       MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D08__ETM_DA3                       MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D09__ETM_DA4                       MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT         MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN          MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT         MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN          MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC                    MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC                  MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RS__LCD_DOTCLK                     MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_CS__LCD_ENABLE                     MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0                MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1                MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK                 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA4__SSP2_D0                    MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA5__SSP2_D3                    MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD                   MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK                   MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_SCK__SSP2_D1                      MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_CMD__SSP2_D2                      MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA0__SSP2_D6                    MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA3__SSP2_D7                    MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SCK__AUART2_RX                    MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MOSI__AUART2_TX                   MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MISO__AUART3_RX                   MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS0__AUART3_TX                    MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS1__SSP2_D1                      MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS2__SSP2_D2                      MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SCK__AUART4_TX                    MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MOSI__AUART4_RX                   MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MISO__AUART4_RTS                  MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SS0__AUART4_CTS                   MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_RX__I2C0_SCL                    MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_TX__I2C0_SDA                    MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_CTS__AUART4_RX                  MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_RTS__AUART4_TX                  MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT            MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT            MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT           MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RTS__USB0_ID                    MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RX__SSP3_D1                     MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_TX__SSP3_D2                     MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_CTS__I2C1_SCL                   MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RTS__I2C1_SDA                   MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RX__CAN0_TX                     MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_TX__CAN0_RX                     MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_CTS__CAN1_TX                    MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RTS__CAN1_RX                    MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
-#define MX28_PAD_PWM0__I2C1_SCL                         MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
-#define MX28_PAD_PWM1__I2C1_SDA                         MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
-#define MX28_PAD_PWM2__USB0_ID                          MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_MCLK__PWM_3                      MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_LRCLK__PWM_4                     MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_BITCLK__PWM_5                    MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_SDATA0__PWM_6                    MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA               MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB               MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF1_SDATA0__PWM_7                    MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RESET__LCD_VSYNC                   MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N                   MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N                  MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N                 MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N                  MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4                MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER            MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5               MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6                MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7                MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0                 MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1                 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0                 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1                 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER              MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN                 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN                 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
-/* MUXSEL_2 */
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER                 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK                  MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY0__USB0_ID                     MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER                 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER               MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_ALE__SSP3_D4                      MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CLE__SSP3_D5                      MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D00__ETM_DA0                       MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D01__ETM_DA1                       MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D02__ETM_DA2                       MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D03__ETM_DA3                       MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D04__ETM_DA4                       MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D05__ETM_DA5                       MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D06__ETM_DA6                       MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D07__ETM_DA7                       MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D08__ETM_DA8                       MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D09__ETM_DA9                       MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D10__ETM_DA10                      MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D11__ETM_DA11                      MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D12__ETM_DA12                      MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D13__ETM_DA13                      MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D14__ETM_DA14                      MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D15__ETM_DA15                      MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D16__ETM_DA7                       MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D17__ETM_DA6                       MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D18__ETM_DA5                       MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D19__ETM_DA4                       MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D20__ETM_DA3                       MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D21__ETM_DA2                       MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D22__ETM_DA1                       MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D23__ETM_DA0                       MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_RD_E__ETM_TCTL                     MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK                   MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL                    MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK                   MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT        MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN         MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT      MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN       MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1                 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2                MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1                MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2                 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT             MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT             MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT        MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN        MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT       MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN         MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_RX__DUART_CTS                   MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_TX__DUART_RTS                   MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_CTS__DUART_RX                   MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_RTS__DUART_TX                   MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RX__PWM_0                       MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_TX__PWM_1                       MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA             MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB             MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RX__SSP3_D4                     MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_TX__SSP3_D5                     MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK               MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK                MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT       MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN        MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT      MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN       MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
-#define MX28_PAD_PWM0__DUART_RX                         MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
-#define MX28_PAD_PWM1__DUART_TX                         MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
-#define MX28_PAD_PWM2__USB1_OVERCURRENT                 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS                 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS                MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX                MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX                MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SCL__DUART_RX                     MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SDA__DUART_TX                     MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1             MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SPDIF__ENET1_RX_ER                     MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1                MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2               MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1              MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2               MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT    MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT      MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN       MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT      MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN       MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN     MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT       MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN        MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
-/* MUXSEL_GPIO */
-#define MX28_PAD_GPMI_D00__GPIO_0_0                     MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D01__GPIO_0_1                     MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D02__GPIO_0_2                     MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D03__GPIO_0_3                     MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D04__GPIO_0_4                     MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D05__GPIO_0_5                     MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D06__GPIO_0_6                     MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D07__GPIO_0_7                     MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16                   MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17                   MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18                   MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19                   MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20                   MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21                   MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22                   MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23                   MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDN__GPIO_0_24                    MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_WRN__GPIO_0_25                    MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_ALE__GPIO_0_26                    MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CLE__GPIO_0_27                    MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28                 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D00__GPIO_1_0                      MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D01__GPIO_1_1                      MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D02__GPIO_1_2                      MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D03__GPIO_1_3                      MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D04__GPIO_1_4                      MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D05__GPIO_1_5                      MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D06__GPIO_1_6                      MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D07__GPIO_1_7                      MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D08__GPIO_1_8                      MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D09__GPIO_1_9                      MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D10__GPIO_1_10                     MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D11__GPIO_1_11                     MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D12__GPIO_1_12                     MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D13__GPIO_1_13                     MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D14__GPIO_1_14                     MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D15__GPIO_1_15                     MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D16__GPIO_1_16                     MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D17__GPIO_1_17                     MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D18__GPIO_1_18                     MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D19__GPIO_1_19                     MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D20__GPIO_1_20                     MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D21__GPIO_1_21                     MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D22__GPIO_1_22                     MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D23__GPIO_1_23                     MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RD_E__GPIO_1_24                    MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25                  MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RS__GPIO_1_26                      MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_CS__GPIO_1_27                      MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28                   MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29                   MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30                  MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31                  MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0                   MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1                   MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2                   MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3                   MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4                   MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5                   MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6                   MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7                   MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_CMD__GPIO_2_8                     MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9                  MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_SCK__GPIO_2_10                    MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_SCK__GPIO_2_12                    MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_CMD__GPIO_2_13                    MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14                  MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15                  MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SCK__GPIO_2_16                    MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17                   MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MISO__GPIO_2_18                   MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS0__GPIO_2_19                    MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS1__GPIO_2_20                    MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS2__GPIO_2_21                    MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SCK__GPIO_2_24                    MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25                   MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MISO__GPIO_2_26                   MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SS0__GPIO_2_27                    MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_RX__GPIO_3_0                    MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_TX__GPIO_3_1                    MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_CTS__GPIO_3_2                   MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_RTS__GPIO_3_3                   MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RX__GPIO_3_4                    MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_TX__GPIO_3_5                    MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_CTS__GPIO_3_6                   MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RTS__GPIO_3_7                   MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RX__GPIO_3_8                    MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_TX__GPIO_3_9                    MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_CTS__GPIO_3_10                  MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RTS__GPIO_3_11                  MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RX__GPIO_3_12                   MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_TX__GPIO_3_13                   MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_CTS__GPIO_3_14                  MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RTS__GPIO_3_15                  MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM0__GPIO_3_16                        MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM1__GPIO_3_17                        MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM2__GPIO_3_18                        MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20                  MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21                 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22                MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23                MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SCL__GPIO_3_24                    MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SDA__GPIO_3_25                    MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26                MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SPDIF__GPIO_3_27                       MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM3__GPIO_3_28                        MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM4__GPIO_3_29                        MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RESET__GPIO_3_30                   MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_MDC__GPIO_4_0                    MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1                   MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2                  MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3                   MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4                   MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5                 MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6                  MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7                   MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8                   MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9                   MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10                  MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11                  MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12                  MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13                MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_COL__GPIO_4_14                   MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_CRS__GPIO_4_15                   MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET_CLK__GPIO_4_16                    MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20                   MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
-#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h
deleted file mode 100644
index 7abdf58b8bb7..000000000000
--- a/arch/arm/mach-mxs/include/mach/iomux.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *                      <armlinux@phytec.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_MXS_IOMUX_H__
-#define __MACH_MXS_IOMUX_H__
-/*
- * IOMUX/PAD Bit field definitions
- *
- * PAD_BANK:             0..2   (3)
- * PAD_PIN:              3..7   (5)
- * PAD_MUXSEL:           8..9   (2)
- * PAD_MA:              10..11  (2)
- * PAD_MA_VALID:        12      (1)
- * PAD_VOL:             13      (1)
- * PAD_VOL_VALID:       14      (1)
- * PAD_PULL:            15      (1)
- * PAD_PULL_VALID:      16      (1)
- * RESERVED:            17..31  (15)
- */
-typedef u32 iomux_cfg_t;
-#define MXS_PAD_BANK_SHIFT      0
-#define MXS_PAD_BANK_MASK       ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
-#define MXS_PAD_PIN_SHIFT       3
-#define MXS_PAD_PIN_MASK        ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
-#define MXS_PAD_MUXSEL_SHIFT    8
-#define MXS_PAD_MUXSEL_MASK     ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
-#define MXS_PAD_MA_SHIFT        10
-#define MXS_PAD_MA_MASK         ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
-#define MXS_PAD_MA_VALID_SHIFT  12
-#define MXS_PAD_MA_VALID_MASK   ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
-#define MXS_PAD_VOL_SHIFT       13
-#define MXS_PAD_VOL_MASK        ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
-#define MXS_PAD_VOL_VALID_SHIFT 14
-#define MXS_PAD_VOL_VALID_MASK  ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
-#define MXS_PAD_PULL_SHIFT      15
-#define MXS_PAD_PULL_MASK       ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
-#define MXS_PAD_PULL_VALID_SHIFT 16
-#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
-#define PAD_MUXSEL_0            0
-#define PAD_MUXSEL_1            1
-#define PAD_MUXSEL_2            2
-#define PAD_MUXSEL_GPIO         3
-#define PAD_4MA                 0
-#define PAD_8MA                 1
-#define PAD_12MA                2
-#define PAD_16MA                3
-#define PAD_1V8                 0
-#define PAD_3V3                 1
-#define PAD_NOPULL              0
-#define PAD_PULLUP              1
-#define MXS_PAD_4MA     ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
-                                        MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_8MA     ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
-                                        MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_12MA    ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
-                                        MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_16MA    ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
-                                        MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_1V8     ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
-                                        MXS_PAD_VOL_VALID_MASK)
-#define MXS_PAD_3V3     ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
-                                        MXS_PAD_VOL_VALID_MASK)
-#define MXS_PAD_NOPULL  ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
-                                        MXS_PAD_PULL_VALID_MASK)
-#define MXS_PAD_PULLUP  ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
-                                        MXS_PAD_PULL_VALID_MASK)
-/* generic pad control used in most cases */
-#define MXS_PAD_CTRL    (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
-#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)           \
-                (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |         \
-                ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |            \
-                ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) |      \
-                ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) |              \
-                ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) |            \
-                ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
-/*
- * A pad becomes naked, when none of mA, vol or pull
- * validity bits is set.
- */
-#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
-                MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
-static inline unsigned int PAD_BANK(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
-}
-static inline unsigned int PAD_PIN(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
-}
-static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
-}
-static inline unsigned int PAD_MA(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
-}
-static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
-}
-static inline unsigned int PAD_VOL(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
-}
-static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
-}
-static inline unsigned int PAD_PULL(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
-}
-static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
-{
-        return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
-}
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad);
-/*
- * configures multiple pads
- * convenient way to call the above function with tables
- */
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
-#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c
deleted file mode 100644
index 0e804e2f11f4..000000000000
--- a/arch/arm/mach-mxs/iomux.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *                       <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-#include <asm/mach/map.h>
-#include <mach/mxs.h>
-#include <mach/iomux.h>
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad)
-{
-        u32 reg, ofs, bp, bm;
-        void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
-        /* muxsel */
-        ofs = 0x100;
-        ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
-        bp = PAD_PIN(pad) % 16 * 2;
-        bm = 0x3 << bp;
-        reg = __raw_readl(iomux_base + ofs);
-        reg &= ~bm;
-        reg |= PAD_MUXSEL(pad) << bp;
-        __raw_writel(reg, iomux_base + ofs);
-        /* drive */
-        ofs = cpu_is_mx23() ? 0x200 : 0x300;
-        ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
-        /* mA */
-        if (PAD_MA_VALID(pad)) {
-                bp = PAD_PIN(pad) % 8 * 4;
-                bm = 0x3 << bp;
-                reg = __raw_readl(iomux_base + ofs);
-                reg &= ~bm;
-                reg |= PAD_MA(pad) << bp;
-                __raw_writel(reg, iomux_base + ofs);
-        }
-        /* vol */
-        if (PAD_VOL_VALID(pad)) {
-                bp = PAD_PIN(pad) % 8 * 4 + 2;
-                if (PAD_VOL(pad))
-                        __mxs_setl(1 << bp, iomux_base + ofs);
-                else
-                        __mxs_clrl(1 << bp, iomux_base + ofs);
-        }
-        /* pull */
-        if (PAD_PULL_VALID(pad)) {
-                ofs = cpu_is_mx23() ? 0x400 : 0x600;
-                ofs += PAD_BANK(pad) * 0x10;
-                bp = PAD_PIN(pad);
-                if (PAD_PULL(pad))
-                        __mxs_setl(1 << bp, iomux_base + ofs);
-                else
-                        __mxs_clrl(1 << bp, iomux_base + ofs);
-        }
-        return 0;
-}
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
-{
-        const iomux_cfg_t *p = pad_list;
-        int i;
-        int ret;
-        for (i = 0; i < count; i++) {
-                ret = mxs_iomux_setup_pad(*p);
-                if (ret)
-                        return ret;
-                p++;
-        }
-        return 0;
-}
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
deleted file mode 100644
index f5f061757deb..000000000000
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2011-2012
- * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
- * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
- *
- * based on: mach-mx28evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/micrel_phy.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28)
-static const iomux_cfg_t apx4devkit_pads[] __initconst = {
-        /* duart */
-        MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-        MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-        /* auart0 */
-        MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-        /* auart1 */
-        MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-        MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-        /* auart2 */
-        MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
-        MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
-        /* auart3 */
-        MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
-        MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
-#define MXS_PAD_FEC     (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-        /* fec0 */
-        MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-        MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-        /* i2c */
-        MX28_PAD_I2C0_SCL__I2C0_SCL,
-        MX28_PAD_I2C0_SDA__I2C0_SDA,
-        /* mmc0 */
-        MX28_PAD_SSP0_DATA0__SSP0_D0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA1__SSP0_D1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA2__SSP0_D2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA3__SSP0_D3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA4__SSP0_D4 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA5__SSP0_D5 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA6__SSP0_D6 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA7__SSP0_D7 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_CMD__SSP0_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX28_PAD_SSP0_SCK__SSP0_SCK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* led */
-        MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-        /* saif0 & saif1 */
-        MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-/* led */
-static const struct gpio_led apx4devkit_leds[] __initconst = {
-        {
-                .name = "user-led",
-                .default_trigger = "heartbeat",
-                .gpio = APX4DEVKIT_GPIO_USERLED,
-        },
-};
-static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
-        .leds = apx4devkit_leds,
-        .num_leds = ARRAY_SIZE(apx4devkit_leds),
-};
-static const struct fec_platform_data mx28_fec_pdata __initconst = {
-        .phy = PHY_INTERFACE_MODE_RMII,
-};
-static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
-        .wp_gpio = -EINVAL,
-        .flags = SLOTF_4_BIT_CAPABLE,
-};
-static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
-        { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
-        { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
-};
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
-                defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
-        REGULATOR_SUPPLY("VDDA", "0-000a"),
-        REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
-        .constraints    = {
-                .name   = "3V3",
-                .always_on = 1,
-        },
-        .consumer_supplies = apx4devkit_audio_consumer_supplies,
-        .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
-};
-static struct fixed_voltage_config apx4devkit_vdd_pdata = {
-        .supply_name    = "board-3V3",
-        .microvolts     = 3300000,
-        .gpio           = -EINVAL,
-        .enabled_at_boot = 1,
-        .init_data      = &apx4devkit_vdd_reg_init_data,
-};
-static struct platform_device apx4devkit_voltage_regulator = {
-        .name           = "reg-fixed-voltage",
-        .id             = -1,
-        .num_resources  = 0,
-        .dev            = {
-                .platform_data  = &apx4devkit_vdd_pdata,
-        },
-};
-static void __init apx4devkit_add_regulators(void)
-{
-        platform_device_register(&apx4devkit_voltage_regulator);
-}
-#else
-static void __init apx4devkit_add_regulators(void) {}
-#endif
-static const struct mxs_saif_platform_data
-                        apx4devkit_mxs_saif_pdata[] __initconst = {
-        /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-        {
-                .master_mode = 1,
-                .master_id = 0,
-        }, {
-                .master_mode = 0,
-                .master_id = 0,
-        },
-};
-static int apx4devkit_phy_fixup(struct phy_device *phy)
-{
-        phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
-        return 0;
-}
-static void __init apx4devkit_fec_phy_clk_enable(void)
-{
-        struct clk *clk;
-        /* Enable fec phy clock */
-        clk = clk_get_sys("enet_out", NULL);
-        if (!IS_ERR(clk))
-                clk_prepare_enable(clk);
-}
-static void __init apx4devkit_init(void)
-{
-        mx28_soc_init();
-        mxs_iomux_setup_multiple_pads(apx4devkit_pads,
-                        ARRAY_SIZE(apx4devkit_pads));
-        mx28_add_duart();
-        mx28_add_auart0();
-        mx28_add_auart1();
-        mx28_add_auart2();
-        mx28_add_auart3();
-        /*
-         * Register fixup for the Micrel KS8031 PHY clock
-         * (shares same ID with KS8051)
-         */
-        phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
-                        apx4devkit_phy_fixup);
-        apx4devkit_fec_phy_clk_enable();
-        mx28_add_fec(0, &mx28_fec_pdata);
-        mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
-        gpio_led_register_device(0, &apx4devkit_led_data);
-        mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-        mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
-        mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
-        apx4devkit_add_regulators();
-        mx28_add_mxs_i2c(0);
-        i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
-                        ARRAY_SIZE(apx4devkit_i2c_boardinfo));
-        mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
-}
-static void __init apx4devkit_timer_init(void)
-{
-        mx28_clocks_init();
-}
-static struct sys_timer apx4devkit_timer = {
-        .init   = apx4devkit_timer_init,
-};
-MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
-        .map_io         = mx28_map_io,
-        .init_irq       = mx28_init_irq,
-        .timer          = &apx4devkit_timer,
-        .init_machine   = apx4devkit_init,
-        .restart        = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
deleted file mode 100644
index 4c00c879b893..000000000000
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-#define M28EVK_GPIO_USERLED1    MXS_GPIO_NR(3, 16)
-#define M28EVK_GPIO_USERLED2    MXS_GPIO_NR(3, 17)
-#define MX28EVK_BL_ENABLE       MXS_GPIO_NR(3, 18)
-#define M28EVK_LCD_ENABLE       MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC0_WRITE_PROTECT      MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT      MXS_GPIO_NR(0, 28)
-static const iomux_cfg_t m28evk_pads[] __initconst = {
-        /* duart */
-        MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
-        /* auart0 */
-        MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-        /* auart3 */
-        MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-        MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-        MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-        MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-#define MXS_PAD_FEC     (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-        /* fec0 */
-        MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-        MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-        /* fec1 */
-        MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-        /* flexcan0 */
-        MX28_PAD_GPMI_RDY2__CAN0_TX,
-        MX28_PAD_GPMI_RDY3__CAN0_RX,
-        /* flexcan1 */
-        MX28_PAD_GPMI_CE2N__CAN1_TX,
-        MX28_PAD_GPMI_CE3N__CAN1_RX,
-        /* I2C */
-        MX28_PAD_I2C0_SCL__I2C0_SCL,
-        MX28_PAD_I2C0_SDA__I2C0_SDA,
-        /* mxsfb (lcdif) */
-        MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
-        MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
-        /* mmc0 */
-        MX28_PAD_SSP0_DATA0__SSP0_D0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA1__SSP0_D1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA2__SSP0_D2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA3__SSP0_D3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA4__SSP0_D4 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA5__SSP0_D5 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA6__SSP0_D6 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA7__SSP0_D7 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_CMD__SSP0_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX28_PAD_SSP0_SCK__SSP0_SCK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* mmc1 */
-        MX28_PAD_GPMI_D00__SSP1_D0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D01__SSP1_D1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D02__SSP1_D2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D03__SSP1_D3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D04__SSP1_D4 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D05__SSP1_D5 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D06__SSP1_D6 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D07__SSP1_D7 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_RDY1__SSP1_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_WRN__SSP1_SCK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* write protect */
-        MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* slot power enable */
-        MX28_PAD_PWM4__GPIO_3_29 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* led */
-        MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
-        MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
-        /* nand */
-        MX28_PAD_GPMI_D00__GPMI_D0 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_D01__GPMI_D1 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_D02__GPMI_D2 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_D03__GPMI_D3 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_D04__GPMI_D4 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_D05__GPMI_D5 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_D06__GPMI_D6 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_D07__GPMI_D7 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_CE0N__GPMI_CE0N |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_RDY0__GPMI_READY0 |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_RDN__GPMI_RDN |
-                (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_WRN__GPMI_WRN |
-                (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_ALE__GPMI_ALE |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_CLE__GPMI_CLE |
-                (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_RESETN__GPMI_RESETN |
-                (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-        /* Backlight */
-        MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-};
-/* led */
-static const struct gpio_led m28evk_leds[] __initconst = {
-        {
-                .name = "user-led1",
-                .default_trigger = "heartbeat",
-                .gpio = M28EVK_GPIO_USERLED1,
-        },
-        {
-                .name = "user-led2",
-                .default_trigger = "heartbeat",
-                .gpio = M28EVK_GPIO_USERLED2,
-        },
-};
-static const struct gpio_led_platform_data m28evk_led_data __initconst = {
-        .leds = m28evk_leds,
-        .num_leds = ARRAY_SIZE(m28evk_leds),
-};
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-        {
-                /* fec0 */
-                .phy = PHY_INTERFACE_MODE_RMII,
-        }, {
-                /* fec1 */
-                .phy = PHY_INTERFACE_MODE_RMII,
-        },
-};
-static int __init m28evk_fec_get_mac(void)
-{
-        int i;
-        u32 val;
-        const u32 *ocotp = mxs_get_ocotp();
-        if (!ocotp)
-                return -ETIMEDOUT;
-        /*
-         * OCOTP only stores the last 4 octets for each mac address,
-         * so hard-code DENX OUI (C0:E5:4E) here.
-         */
-        for (i = 0; i < 2; i++) {
-                val = ocotp[i];
-                mx28_fec_pdata[i].mac[0] = 0xC0;
-                mx28_fec_pdata[i].mac[1] = 0xE5;
-                mx28_fec_pdata[i].mac[2] = 0x4E;
-                mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-                mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-                mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-        }
-        return 0;
-}
-/* mxsfb (lcdif) */
-static struct fb_videomode m28evk_video_modes[] = {
-        {
-                .name           = "Ampire AM-800480R2TMQW-T01H",
-                .refresh        = 60,
-                .xres           = 800,
-                .yres           = 480,
-                .pixclock       = 30066, /* picosecond (33.26 MHz) */
-                .left_margin    = 0,
-                .right_margin   = 256,
-                .upper_margin   = 0,
-                .lower_margin   = 45,
-                .hsync_len      = 1,
-                .vsync_len      = 1,
-                .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT,
-        },
-};
-static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
-        .mode_list      = m28evk_video_modes,
-        .mode_count     = ARRAY_SIZE(m28evk_video_modes),
-        .default_bpp    = 16,
-        .ld_intf_width  = STMLCDIF_18BIT,
-};
-static struct at24_platform_data m28evk_eeprom = {
-        .byte_len = 16384,
-        .page_size = 32,
-        .flags = AT24_FLAG_ADDR16,
-};
-static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
-        {
-                I2C_BOARD_INFO("at24", 0x51),   /* E0=1, E1=0, E2=0 */
-                .platform_data = &m28evk_eeprom,
-        },
-};
-static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
-        {
-                /* mmc0 */
-                .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-                .flags = SLOTF_8_BIT_CAPABLE,
-        }, {
-                /* mmc1 */
-                .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-                .flags = SLOTF_8_BIT_CAPABLE,
-        },
-};
-static void __init m28evk_init(void)
-{
-        mx28_soc_init();
-        mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
-        mx28_add_duart();
-        mx28_add_auart0();
-        mx28_add_auart3();
-        if (!m28evk_fec_get_mac()) {
-                mx28_add_fec(0, &mx28_fec_pdata[0]);
-                mx28_add_fec(1, &mx28_fec_pdata[1]);
-        }
-        mx28_add_flexcan(0, NULL);
-        mx28_add_flexcan(1, NULL);
-        mx28_add_mxsfb(&m28evk_mxsfb_pdata);
-        mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
-        mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
-        gpio_led_register_device(0, &m28evk_led_data);
-        /* I2C */
-        mx28_add_mxs_i2c(0);
-        i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
-                        ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
-}
-static void __init m28evk_timer_init(void)
-{
-        mx28_clocks_init();
-}
-static struct sys_timer m28evk_timer = {
-        .init   = m28evk_timer_init,
-};
-MACHINE_START(M28EVK, "DENX M28 EVK")
-        .map_io         = mx28_map_io,
-        .init_irq       = mx28_init_irq,
-        .timer          = &m28evk_timer,
-        .init_machine   = m28evk_init,
-        .restart        = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
deleted file mode 100644
index e7272a41939d..000000000000
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-#include "devices-mx23.h"
-#define MX23EVK_LCD_ENABLE      MXS_GPIO_NR(1, 18)
-#define MX23EVK_BL_ENABLE       MXS_GPIO_NR(1, 28)
-#define MX23EVK_MMC0_WRITE_PROTECT      MXS_GPIO_NR(1, 30)
-#define MX23EVK_MMC0_SLOT_POWER         MXS_GPIO_NR(1, 29)
-static const iomux_cfg_t mx23evk_pads[] __initconst = {
-        /* duart */
-        MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-        MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-        /* auart */
-        MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-        MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-        MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
-        MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
-        /* mxsfb (lcdif) */
-        MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-        MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
-        MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
-        MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
-        MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
-        MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
-        MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
-        MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
-        MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
-        MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
-        MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
-        /* LCD panel enable */
-        MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
-        /* backlight control */
-        MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
-        /* mmc */
-        MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_GPMI_D08__SSP1_DATA4 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_GPMI_D09__SSP1_DATA5 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_GPMI_D10__SSP1_DATA6 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_GPMI_D11__SSP1_DATA7 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_CMD__SSP1_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX23_PAD_SSP1_SCK__SSP1_SCK |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* write protect */
-        MX23_PAD_PWM4__GPIO_1_30 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* slot power enable */
-        MX23_PAD_PWM3__GPIO_1_29 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-/* mxsfb (lcdif) */
-static struct fb_videomode mx23evk_video_modes[] = {
-        {
-                .name           = "Samsung-LMS430HF02",
-                .refresh        = 60,
-                .xres           = 480,
-                .yres           = 272,
-                .pixclock       = 108096, /* picosecond (9.2 MHz) */
-                .left_margin    = 15,
-                .right_margin   = 8,
-                .upper_margin   = 12,
-                .lower_margin   = 4,
-                .hsync_len      = 1,
-                .vsync_len      = 1,
-                .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT |
-                                  FB_SYNC_DOTCLK_FAILING_ACT,
-        },
-};
-static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
-        .mode_list      = mx23evk_video_modes,
-        .mode_count     = ARRAY_SIZE(mx23evk_video_modes),
-        .default_bpp    = 32,
-        .ld_intf_width  = STMLCDIF_24BIT,
-};
-static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
-        .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
-        .flags = SLOTF_8_BIT_CAPABLE,
-};
-static void __init mx23evk_init(void)
-{
-        int ret;
-        mx23_soc_init();
-        mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
-        mx23_add_duart();
-        mx23_add_auart0();
-        /* power on mmc slot by writing 0 to the gpio */
-        ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
-                               "mmc0-slot-power");
-        if (ret)
-                pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-        mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
-        ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
-        if (ret)
-                pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-        else
-                gpio_set_value(MX23EVK_LCD_ENABLE, 1);
-        ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
-        if (ret)
-                pr_warn("failed to request gpio bl-enable: %d\n", ret);
-        else
-                gpio_set_value(MX23EVK_BL_ENABLE, 1);
-        mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
-        mx23_add_rtc_stmp3xxx();
-}
-static void __init mx23evk_timer_init(void)
-{
-        mx23_clocks_init();
-}
-static struct sys_timer mx23evk_timer = {
-        .init   = mx23evk_timer_init,
-};
-MACHINE_START(MX23EVK, "Freescale MX23 EVK")
-        /* Maintainer: Freescale Semiconductor, Inc. */
-        .map_io         = mx23_map_io,
-        .init_irq       = mx23_init_irq,
-        .timer          = &mx23evk_timer,
-        .init_machine   = mx23evk_init,
-        .restart        = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
deleted file mode 100644
index dafd48e86c8c..000000000000
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include <mach/digctl.h>
-#include "devices-mx28.h"
-#define MX28EVK_FLEXCAN_SWITCH  MXS_GPIO_NR(2, 13)
-#define MX28EVK_FEC_PHY_POWER   MXS_GPIO_NR(2, 15)
-#define MX28EVK_GPIO_LED        MXS_GPIO_NR(3, 5)
-#define MX28EVK_BL_ENABLE       MXS_GPIO_NR(3, 18)
-#define MX28EVK_LCD_ENABLE      MXS_GPIO_NR(3, 30)
-#define MX28EVK_FEC_PHY_RESET   MXS_GPIO_NR(4, 13)
-#define MX28EVK_MMC0_WRITE_PROTECT      MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT      MXS_GPIO_NR(0, 28)
-#define MX28EVK_MMC0_SLOT_POWER         MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC1_SLOT_POWER         MXS_GPIO_NR(3, 29)
-static const iomux_cfg_t mx28evk_pads[] __initconst = {
-        /* duart */
-        MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-        MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-        /* auart0 */
-        MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-        MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-        /* auart3 */
-        MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-        MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-        MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-        MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-#define MXS_PAD_FEC     (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-        /* fec0 */
-        MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-        MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-        /* fec1 */
-        MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-        MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-        /* phy power line */
-        MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
-        /* phy reset line */
-        MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
-        /* flexcan0 */
-        MX28_PAD_GPMI_RDY2__CAN0_TX,
-        MX28_PAD_GPMI_RDY3__CAN0_RX,
-        /* flexcan1 */
-        MX28_PAD_GPMI_CE2N__CAN1_TX,
-        MX28_PAD_GPMI_CE3N__CAN1_RX,
-        /* transceiver power control */
-        MX28_PAD_SSP1_CMD__GPIO_2_13,
-        /* mxsfb (lcdif) */
-        MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-        MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
-        MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
-        MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
-        MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
-        /* LCD panel enable */
-        MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
-        /* backlight control */
-        MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
-        /* mmc0 */
-        MX28_PAD_SSP0_DATA0__SSP0_D0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA1__SSP0_D1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA2__SSP0_D2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA3__SSP0_D3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA4__SSP0_D4 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA5__SSP0_D5 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA6__SSP0_D6 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA7__SSP0_D7 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_CMD__SSP0_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX28_PAD_SSP0_SCK__SSP0_SCK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* write protect */
-        MX28_PAD_SSP1_SCK__GPIO_2_12 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* slot power enable */
-        MX28_PAD_PWM3__GPIO_3_28 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* mmc1 */
-        MX28_PAD_GPMI_D00__SSP1_D0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D01__SSP1_D1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D02__SSP1_D2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D03__SSP1_D3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D04__SSP1_D4 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D05__SSP1_D5 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D06__SSP1_D6 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_D07__SSP1_D7 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_RDY1__SSP1_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX28_PAD_GPMI_WRN__SSP1_SCK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* write protect */
-        MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* slot power enable */
-        MX28_PAD_PWM4__GPIO_3_29 |
-                (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        /* led */
-        MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
-        /* I2C */
-        MX28_PAD_I2C0_SCL__I2C0_SCL |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_I2C0_SDA__I2C0_SDA |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        /* saif0 & saif1 */
-        MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-/* led */
-static const struct gpio_led mx28evk_leds[] __initconst = {
-        {
-                .name = "GPIO-LED",
-                .default_trigger = "heartbeat",
-                .gpio = MX28EVK_GPIO_LED,
-        },
-};
-static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
-        .leds = mx28evk_leds,
-        .num_leds = ARRAY_SIZE(mx28evk_leds),
-};
-/* fec */
-static void __init mx28evk_fec_reset(void)
-{
-        struct clk *clk;
-        /* Enable fec phy clock */
-        clk = clk_get_sys("enet_out", NULL);
-        if (!IS_ERR(clk))
-                clk_prepare_enable(clk);
-        gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
-        mdelay(1);
-        gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
-}
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-        {
-                /* fec0 */
-                .phy = PHY_INTERFACE_MODE_RMII,
-        }, {
-                /* fec1 */
-                .phy = PHY_INTERFACE_MODE_RMII,
-        },
-};
-static int __init mx28evk_fec_get_mac(void)
-{
-        int i;
-        u32 val;
-        const u32 *ocotp = mxs_get_ocotp();
-        if (!ocotp)
-                return -ETIMEDOUT;
-        /*
-         * OCOTP only stores the last 4 octets for each mac address,
-         * so hard-code Freescale OUI (00:04:9f) here.
-         */
-        for (i = 0; i < 2; i++) {
-                val = ocotp[i];
-                mx28_fec_pdata[i].mac[0] = 0x00;
-                mx28_fec_pdata[i].mac[1] = 0x04;
-                mx28_fec_pdata[i].mac[2] = 0x9f;
-                mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-                mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-                mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-        }
-        return 0;
-}
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-static int flexcan0_en, flexcan1_en;
-static void mx28evk_flexcan_switch(void)
-{
-        if (flexcan0_en || flexcan1_en)
-                gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
-        else
-                gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-static void mx28evk_flexcan0_switch(int enable)
-{
-        flexcan0_en = enable;
-        mx28evk_flexcan_switch();
-}
-static void mx28evk_flexcan1_switch(int enable)
-{
-        flexcan1_en = enable;
-        mx28evk_flexcan_switch();
-}
-static const struct flexcan_platform_data
-                mx28evk_flexcan_pdata[] __initconst = {
-        {
-                .transceiver_switch = mx28evk_flexcan0_switch,
-        }, {
-                .transceiver_switch = mx28evk_flexcan1_switch,
-        }
-};
-/* mxsfb (lcdif) */
-static struct fb_videomode mx28evk_video_modes[] = {
-        {
-                .name           = "Seiko-43WVF1G",
-                .refresh        = 60,
-                .xres           = 800,
-                .yres           = 480,
-                .pixclock       = 29851, /* picosecond (33.5 MHz) */
-                .left_margin    = 89,
-                .right_margin   = 164,
-                .upper_margin   = 23,
-                .lower_margin   = 10,
-                .hsync_len      = 10,
-                .vsync_len      = 10,
-                .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT |
-                                  FB_SYNC_DOTCLK_FAILING_ACT,
-        },
-};
-static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
-        .mode_list      = mx28evk_video_modes,
-        .mode_count     = ARRAY_SIZE(mx28evk_video_modes),
-        .default_bpp    = 32,
-        .ld_intf_width  = STMLCDIF_24BIT,
-};
-static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
-        {
-                /* mmc0 */
-                .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-                .flags = SLOTF_8_BIT_CAPABLE,
-        }, {
-                /* mmc1 */
-                .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-                .flags = SLOTF_8_BIT_CAPABLE,
-        },
-};
-static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
-        {
-                I2C_BOARD_INFO("sgtl5000", 0x0a),
-        },
-};
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
-        REGULATOR_SUPPLY("VDDA", "0-000a"),
-        REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-static struct regulator_init_data mx28evk_vdd_reg_init_data = {
-        .constraints    = {
-                .name   = "3V3",
-                .always_on = 1,
-        },
-        .consumer_supplies = mx28evk_audio_consumer_supplies,
-        .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
-};
-static struct fixed_voltage_config mx28evk_vdd_pdata = {
-        .supply_name    = "board-3V3",
-        .microvolts     = 3300000,
-        .gpio           = -EINVAL,
-        .enabled_at_boot = 1,
-        .init_data      = &mx28evk_vdd_reg_init_data,
-};
-static struct platform_device mx28evk_voltage_regulator = {
-        .name           = "reg-fixed-voltage",
-        .id             = -1,
-        .num_resources  = 0,
-        .dev            = {
-                .platform_data  = &mx28evk_vdd_pdata,
-        },
-};
-static void __init mx28evk_add_regulators(void)
-{
-        platform_device_register(&mx28evk_voltage_regulator);
-}
-#else
-static void __init mx28evk_add_regulators(void) {}
-#endif
-static const struct gpio mx28evk_gpios[] __initconst = {
-        { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
-        { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
-        { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
-        { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
-        { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
-        { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-        { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
-};
-static const struct mxs_saif_platform_data
-                        mx28evk_mxs_saif_pdata[] __initconst = {
-        /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-        {
-                .master_mode = 1,
-                .master_id = 0,
-        }, {
-                .master_mode = 0,
-                .master_id = 0,
-        },
-};
-static void __init mx28evk_init(void)
-{
-        int ret;
-        mx28_soc_init();
-        mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
-        mx28_add_duart();
-        mx28_add_auart0();
-        mx28_add_auart3();
-        if (mx28evk_fec_get_mac())
-                pr_warn("%s: failed on fec mac setup\n", __func__);
-        ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
-        if (ret)
-                pr_err("One or more GPIOs failed to be requested: %d\n", ret);
-        mx28evk_fec_reset();
-        mx28_add_fec(0, &mx28_fec_pdata[0]);
-        mx28_add_fec(1, &mx28_fec_pdata[1]);
-        mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
-        mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-        mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
-        mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-        mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
-        mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
-        mx28_add_mxs_i2c(0);
-        i2c_register_board_info(0, mxs_i2c0_board_info,
-                                ARRAY_SIZE(mxs_i2c0_board_info));
-        mx28evk_add_regulators();
-        mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
-                        NULL, 0);
-        mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
-        mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
-        mx28_add_rtc_stmp3xxx();
-        gpio_led_register_device(0, &mx28evk_led_data);
-}
-static void __init mx28evk_timer_init(void)
-{
-        mx28_clocks_init();
-}
-static struct sys_timer mx28evk_timer = {
-        .init   = mx28evk_timer_init,
-};
-MACHINE_START(MX28EVK, "Freescale MX28 EVK")
-        /* Maintainer: Freescale Semiconductor, Inc. */
-        .map_io         = mx28_map_io,
-        .init_irq       = mx28_init_irq,
-        .timer          = &mx28evk_timer,
-        .init_machine   = mx28evk_init,
-        .restart        = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 8dabfe81d07c..433af893ad8a 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -12,8 +12,10 @@
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/can/platform/flexcan.h>
+#include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/irqdomain.h>
 #include <linux/micrel_phy.h>
@@ -21,9 +23,12 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
+#include <linux/pinctrl/consumer.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/mxs.h>
 static struct fb_videomode mx23evk_video_modes[] = {
        {
@@ -99,9 +104,40 @@ static struct fb_videomode apx4devkit_video_modes[] = {
 static struct mxsfb_platform_data mxsfb_pdata __initdata;
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+#define MX28EVK_FLEXCAN_SWITCH  MXS_GPIO_NR(2, 13)
+static int flexcan0_en, flexcan1_en;
+static void mx28evk_flexcan_switch(void)
+{
+        if (flexcan0_en || flexcan1_en)
+                gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+        else
+                gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
+}
+static void mx28evk_flexcan0_switch(int enable)
+{
+        flexcan0_en = enable;
+        mx28evk_flexcan_switch();
+}
+static void mx28evk_flexcan1_switch(int enable)
+{
+        flexcan1_en = enable;
+        mx28evk_flexcan_switch();
+}
+static struct flexcan_platform_data flexcan_pdata[2];
 static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
        OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
        OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+        OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
+        OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
        { /* sentinel */ }
 };
@@ -237,13 +273,21 @@ static void __init imx28_evk_init(void)
        mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
        mxsfb_pdata.default_bpp = 32;
        mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+        mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
-static void __init m28evk_init(void)
+static void __init imx28_evk_post_init(void)
 {
-        enable_clk_enet_out();
+        if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
-        update_fec_mac_prop(OUI_DENX);
+                              "flexcan-switch")) {
+                flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
+                flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
+        }
+}
+static void __init m28evk_init(void)
+{
        mxsfb_pdata.mode_list = m28evk_video_modes;
        mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
        mxsfb_pdata.default_bpp = 16;
@@ -270,6 +314,80 @@ static void __init apx4devkit_init(void)
        mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
 }
+#define ENET0_MDC__GPIO_4_0     MXS_GPIO_NR(4, 0)
+#define ENET0_MDIO__GPIO_4_1    MXS_GPIO_NR(4, 1)
+#define ENET0_RX_EN__GPIO_4_2   MXS_GPIO_NR(4, 2)
+#define ENET0_RXD0__GPIO_4_3    MXS_GPIO_NR(4, 3)
+#define ENET0_RXD1__GPIO_4_4    MXS_GPIO_NR(4, 4)
+#define ENET0_TX_EN__GPIO_4_6   MXS_GPIO_NR(4, 6)
+#define ENET0_TXD0__GPIO_4_7    MXS_GPIO_NR(4, 7)
+#define ENET0_TXD1__GPIO_4_8    MXS_GPIO_NR(4, 8)
+#define ENET_CLK__GPIO_4_16     MXS_GPIO_NR(4, 16)
+#define TX28_FEC_PHY_POWER      MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET      MXS_GPIO_NR(4, 13)
+#define TX28_FEC_nINT           MXS_GPIO_NR(4, 5)
+static const struct gpio tx28_gpios[] __initconst = {
+        { ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
+        { ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
+        { ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
+        { ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
+        { ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
+        { ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
+        { ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
+        { ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
+        { ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
+        { TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+        { TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
+        { TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
+};
+static void __init tx28_post_init(void)
+{
+        struct device_node *np;
+        struct platform_device *pdev;
+        struct pinctrl *pctl;
+        int ret;
+        enable_clk_enet_out();
+        np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
+        pdev = of_find_device_by_node(np);
+        if (!pdev) {
+                pr_err("%s: failed to find fec device\n", __func__);
+                return;
+        }
+        pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
+        if (IS_ERR(pctl)) {
+                pr_err("%s: failed to get pinctrl state\n", __func__);
+                return;
+        }
+        ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
+        if (ret) {
+                pr_err("%s: failed to request gpios: %d\n", __func__, ret);
+                return;
+        }
+        /* Power up fec phy */
+        gpio_set_value(TX28_FEC_PHY_POWER, 1);
+        msleep(26); /* 25ms according to data sheet */
+        /* Mode strap pins */
+        gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
+        gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
+        gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
+        udelay(100); /* minimum assertion time for nRST */
+        /* Deasserting FEC PHY RESET */
+        gpio_set_value(TX28_FEC_PHY_RESET, 1);
+        pinctrl_put(pctl);
+}
 static void __init mxs_machine_init(void)
 {
        if (of_machine_is_compatible("fsl,imx28-evk"))
@@ -283,22 +401,20 @@ static void __init mxs_machine_init(void)
        of_platform_populate(NULL, of_default_bus_match_table,
                             mxs_auxdata_lookup, NULL);
+        if (of_machine_is_compatible("karo,tx28"))
+                tx28_post_init();
+        if (of_machine_is_compatible("fsl,imx28-evk"))
+                imx28_evk_post_init();
 }
 static const char *imx23_dt_compat[] __initdata = {
-        "fsl,imx23-evk",
-        "fsl,stmp378x_devb"
-        "olimex,imx23-olinuxino",
        "fsl,imx23",
        NULL,
 };
 static const char *imx28_dt_compat[] __initdata = {
-        "bluegiga,apx4devkit",
-        "crystalfontz,cfa10036",
-        "denx,m28evk",
-        "fsl,imx28-evk",
-        "karo,tx28",
        "fsl,imx28",
        NULL,
 };
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
deleted file mode 100644
index 6548965e4a76..000000000000
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-#include "devices-mx23.h"
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT        MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER           MXS_GPIO_NR(1, 29)
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
-        /* duart (extended setup missing in old boardcode, too */
-        MX23_PAD_PWM0__DUART_RX,
-        MX23_PAD_PWM1__DUART_TX,
-        /* auart */
-        MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
-        MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
-        MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
-        MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-        /* mmc */
-        MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_CMD__SSP1_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX23_PAD_SSP1_SCK__SSP1_SCK |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
-        MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
-        .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-        {
-                .modalias       = "enc28j60",
-                .max_speed_hz   = 6 * 1000 * 1000,
-                .bus_num        = 1,
-                .chip_select    = 0,
-                .platform_data  = NULL,
-        },
-#endif
-};
-static void __init stmp378x_dvb_init(void)
-{
-        int ret;
-        mx23_soc_init();
-        mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
-                        ARRAY_SIZE(stmp378x_dvb_pads));
-        mx23_add_duart();
-        mx23_add_auart0();
-        mx23_add_rtc_stmp3xxx();
-        /* power on mmc slot */
-        ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
-                GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
-        if (ret)
-                pr_warn("could not power mmc (%d)\n", ret);
-        mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-static void __init stmp378x_dvb_timer_init(void)
-{
-        mx23_clocks_init();
-}
-static struct sys_timer stmp378x_dvb_timer = {
-        .init   = stmp378x_dvb_timer_init,
-};
-MACHINE_START(STMP378X, "STMP378X")
-        .map_io         = mx23_map_io,
-        .init_irq       = mx23_init_irq,
-        .timer          = &stmp378x_dvb_timer,
-        .init_machine   = stmp378x_dvb_init,
-        .restart        = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
deleted file mode 100644
index 8837029de1a4..000000000000
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- */
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/i2c.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-#include "module-tx28.h"
-#define TX28_STK5_GPIO_LED              MXS_GPIO_NR(4, 10)
-static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
-        /* LED */
-        MX28_PAD_ENET0_RXD3__GPIO_4_10 |
-                MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
-        /* framebuffer */
-#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
-        MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
-        MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
-        MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
-        MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
-        MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
-        MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
-        MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
-        MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
-        MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
-        MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
-        MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
-        MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
-        MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
-        MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
-        MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
-        MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
-        MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
-        MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
-        MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
-        MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
-        MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
-        MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
-        MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
-        MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
-        MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
-        MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
-        MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
-        MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
-        MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
-        MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
-        MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
-        MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
-        MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
-        MX28_PAD_PWM0__PWM_0 | LCD_MODE,
-        /* UART1 */
-        MX28_PAD_AUART0_CTS__DUART_RX,
-        MX28_PAD_AUART0_RTS__DUART_TX,
-        MX28_PAD_AUART0_TX__DUART_RTS,
-        MX28_PAD_AUART0_RX__DUART_CTS,
-        /* UART2 */
-        MX28_PAD_AUART1_RX__AUART1_RX,
-        MX28_PAD_AUART1_TX__AUART1_TX,
-        MX28_PAD_AUART1_RTS__AUART1_RTS,
-        MX28_PAD_AUART1_CTS__AUART1_CTS,
-        /* CAN */
-        MX28_PAD_GPMI_RDY2__CAN0_TX,
-        MX28_PAD_GPMI_RDY3__CAN0_RX,
-        /* I2C */
-        MX28_PAD_I2C0_SCL__I2C0_SCL,
-        MX28_PAD_I2C0_SDA__I2C0_SDA,
-        /* TSC2007 */
-        MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
-        /* MMC0 */
-        MX28_PAD_SSP0_DATA0__SSP0_D0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA1__SSP0_D1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA2__SSP0_D2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA3__SSP0_D3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_CMD__SSP0_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX28_PAD_SSP0_SCK__SSP0_SCK |
-                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
-        {
-                .name = "GPIO-LED",
-                .default_trigger = "heartbeat",
-                .gpio = TX28_STK5_GPIO_LED,
-        },
-};
-static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
-        .leds = tx28_stk5v3_leds,
-        .num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
-};
-static struct spi_board_info tx28_spi_board_info[] = {
-        {
-                .modalias = "spidev",
-                .max_speed_hz = 20000000,
-                .bus_num = 0,
-                .chip_select = 1,
-                .controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
-                .mode = SPI_MODE_0,
-        },
-};
-static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
-        {
-                I2C_BOARD_INFO("ds1339", 0x68),
-        },
-};
-static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
-       .wp_gpio = -EINVAL,
-       .flags = SLOTF_4_BIT_CAPABLE,
-};
-static void __init tx28_stk5v3_init(void)
-{
-        mx28_soc_init();
-        mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
-                        ARRAY_SIZE(tx28_stk5v3_pads));
-        mx28_add_duart(); /* UART1 */
-        mx28_add_auart(1); /* UART2 */
-        tx28_add_fec0();
-        /* spi via ssp will be added when available */
-        spi_register_board_info(tx28_spi_board_info,
-                        ARRAY_SIZE(tx28_spi_board_info));
-        gpio_led_register_device(0, &tx28_stk5v3_led_data);
-        mx28_add_mxs_i2c(0);
-        i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
-                        ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
-        mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
-        mx28_add_rtc_stmp3xxx();
-}
-static void __init tx28_timer_init(void)
-{
-        mx28_clocks_init();
-}
-static struct sys_timer tx28_timer = {
-        .init = tx28_timer_init,
-};
-MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
-        .map_io = mx28_map_io,
-        .init_irq = mx28_init_irq,
-        .timer = &tx28_timer,
-        .init_machine = tx28_stk5v3_init,
-        .restart        = mxs_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index dccb67a9e7c4..a4294aa9f301 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -13,14 +13,11 @@
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/pinctrl/machine.h>
 #include <asm/mach/map.h>
 #include <mach/mx23.h>
 #include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
 /*
 * Define the MX23 memory map.
@@ -48,43 +45,7 @@ void __init mx23_map_io(void)
        iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
 }
-void __init mx23_init_irq(void)
-{
-        icoll_init_irq();
-}
 void __init mx28_map_io(void)
 {
        iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
 }
-void __init mx28_init_irq(void)
-{
-        icoll_init_irq();
-}
-void __init mx23_soc_init(void)
-{
-        pinctrl_provide_dummies();
-        mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
-        mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-        mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
-        mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
-        mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
-}
-void __init mx28_soc_init(void)
-{
-        pinctrl_provide_dummies();
-        mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR);
-        mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR);
-        mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
-        mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
-        mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
-        mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
-        mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
-}
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
deleted file mode 100644
index 0f71f82101cc..000000000000
--- a/arch/arm/mach-mxs/module-tx28.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/delay.h>
-#include <linux/fec.h>
-#include <linux/gpio.h>
-#include <mach/iomux-mx28.h>
-#include "devices-mx28.h"
-#include "module-tx28.h"
-#define TX28_FEC_PHY_POWER      MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET      MXS_GPIO_NR(4, 13)
-static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
-        /* PHY POWER */
-        MX28_PAD_PWM4__GPIO_3_29 |
-                MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-        /* PHY RESET */
-        MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-                MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-        /* Mode strap pins 0-2 */
-        MX28_PAD_ENET0_RXD0__GPIO_4_3 |
-                MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-        MX28_PAD_ENET0_RXD1__GPIO_4_4 |
-                MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-        MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
-                MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-        /* nINT */
-        MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
-                MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-        MX28_PAD_ENET0_MDC__GPIO_4_0,
-        MX28_PAD_ENET0_MDIO__GPIO_4_1,
-        MX28_PAD_ENET0_TX_EN__GPIO_4_6,
-        MX28_PAD_ENET0_TXD0__GPIO_4_7,
-        MX28_PAD_ENET0_TXD1__GPIO_4_8,
-        MX28_PAD_ENET_CLK__GPIO_4_16,
-};
-#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
-        MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
-        MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
-        MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
-        MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
-        MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
-        MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
-        MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
-        MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
-        MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
-};
-static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
-        MX28_PAD_ENET0_RXD2__ENET1_RXD0,
-        MX28_PAD_ENET0_RXD3__ENET1_RXD1,
-        MX28_PAD_ENET0_TXD2__ENET1_TXD0,
-        MX28_PAD_ENET0_TXD3__ENET1_TXD1,
-        MX28_PAD_ENET0_COL__ENET1_TX_EN,
-        MX28_PAD_ENET0_CRS__ENET1_RX_EN,
-};
-static const struct fec_platform_data tx28_fec0_data __initconst = {
-        .phy = PHY_INTERFACE_MODE_RMII,
-};
-static const struct fec_platform_data tx28_fec1_data __initconst = {
-        .phy = PHY_INTERFACE_MODE_RMII,
-};
-int __init tx28_add_fec0(void)
-{
-        int i, ret;
-        pr_debug("%s: Switching FEC PHY power off\n", __func__);
-        ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
-                        ARRAY_SIZE(tx28_fec_gpio_pads));
-        for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
-                unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-                        PAD_PIN(tx28_fec_gpio_pads[i]));
-                ret = gpio_request(gpio, "FEC");
-                if (ret) {
-                        pr_err("Failed to request GPIO_%d_%d: %d\n",
-                                PAD_BANK(tx28_fec_gpio_pads[i]),
-                                PAD_PIN(tx28_fec_gpio_pads[i]), ret);
-                        goto free_gpios;
-                }
-                ret = gpio_direction_output(gpio, 0);
-                if (ret) {
-                        pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
-                                        gpio / 32 + 1, gpio % 32, ret);
-                        goto free_gpios;
-                }
-        }
-        /* Power up fec phy */
-        pr_debug("%s: Switching FEC PHY power on\n", __func__);
-        ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
-        if (ret) {
-                pr_err("Failed to power on PHY: %d\n", ret);
-                goto free_gpios;
-        }
-        mdelay(26); /* 25ms according to data sheet */
-        /* nINT */
-        gpio_direction_input(MXS_GPIO_NR(4, 5));
-        /* Mode strap pins */
-        gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
-        gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
-        gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
-        udelay(100); /* minimum assertion time for nRST */
-        pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
-        gpio_set_value(TX28_FEC_PHY_RESET, 1);
-        ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
-                        ARRAY_SIZE(tx28_fec0_pads));
-        if (ret) {
-                pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-                                __func__, ret);
-                goto free_gpios;
-        }
-        pr_debug("%s: Registering FEC0 device\n", __func__);
-        mx28_add_fec(0, &tx28_fec0_data);
-        return 0;
-free_gpios:
-        while (--i >= 0) {
-                unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-                        PAD_PIN(tx28_fec_gpio_pads[i]));
-                gpio_free(gpio);
-        }
-        return ret;
-}
-int __init tx28_add_fec1(void)
-{
-        int ret;
-        ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
-                        ARRAY_SIZE(tx28_fec1_pads));
-        if (ret) {
-                pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-                                __func__, ret);
-                return ret;
-        }
-        pr_debug("%s: Registering FEC1 device\n", __func__);
-        mx28_add_fec(1, &tx28_fec1_data);
-        return 0;
-}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
deleted file mode 100644
index 8ed425457d30..000000000000
--- a/arch/arm/mach-mxs/module-tx28.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- *   Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-int __init tx28_add_fec0(void);
-int __init tx28_add_fec1(void);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 346fd26f3aa6..eef99b77c40b 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -18,6 +18,7 @@ config ARCH_OMAP2PLUS_TYPICAL
        select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
        select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
        select HIGHMEM
+        select PINCTRL
        help
          Compile a kernel suitable for booting most boards
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
index b03e562acc60..be0fe9226d67 100644
--- a/arch/arm/mach-omap2/Makefile.boot
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -1,3 +1,9 @@
  zreladdr-y            += 0x80008000
 params_phys-y           := 0x80000100
 initrd_phys-y           := 0x80800000
+dtb-$(CONFIG_SOC_OMAP2420)      += omap2420-h4.dtb
+dtb-$(CONFIG_ARCH_OMAP3)        += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb
+dtb-$(CONFIG_ARCH_OMAP4)        += omap4-panda.dtb omap4-pandaES.dtb
+dtb-$(CONFIG_ARCH_OMAP4)        += omap4-var_som.dtb omap4-sdp.dtb
+dtb-$(CONFIG_SOC_OMAP5)         += omap5-evm.dtb
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 9fc865502f0c..e1f289748c5d 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -170,7 +170,10 @@ static int __init omap_l2_cache_init(void)
        /* Enable PL310 L2 Cache controller */
        omap_smc1(0x102, 0x1);
-        l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
+        if (of_have_populated_dt())
+                l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+        else
+                l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
        /*
         * Override default outer_cache.disable with a OMAP4
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 3615e0d9ee3c..a5d04ba99b85 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3159,6 +3159,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 }
 /**
+ * omap_hwmod_fill_dma_resources - fill struct resource array with dma data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the array of struct resource to fill
+ *
+ * Fill the struct resource array @res with dma resource data from the
+ * omap_hwmod @oh.  Intended to be called by code that registers
+ * omap_devices.  See also omap_hwmod_count_resources().  Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
+{
+        int i, sdma_reqs_cnt;
+        int r = 0;
+        sdma_reqs_cnt = _count_sdma_reqs(oh);
+        for (i = 0; i < sdma_reqs_cnt; i++) {
+                (res + r)->name = (oh->sdma_reqs + i)->name;
+                (res + r)->start = (oh->sdma_reqs + i)->dma_req;
+                (res + r)->end = (oh->sdma_reqs + i)->dma_req;
+                (res + r)->flags = IORESOURCE_DMA;
+                r++;
+        }
+        return r;
+}
+/**
 * omap_hwmod_get_resource_byname - fetch IP block integration data by name
 * @oh: struct omap_hwmod * to operate on
 * @type: one of the IORESOURCE_* constants from include/linux/ioport.h
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 5214d5bfba27..810aa1a332e1 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -36,6 +36,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
@@ -394,6 +395,11 @@ static void __init omap4_timer_init(void)
        if (omap_rev() != OMAP4430_REV_ES1_0) {
                int err;
+                if (of_have_populated_dt()) {
+                        twd_local_timer_of_register();
+                        return;
+                }
                err = twd_local_timer_register(&twd_local_timer);
                if (err)
                        pr_err("twd_local_timer_register failed %d\n", err);
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
index c77a4883a4ee..98167da874c9 100644
--- a/arch/arm/mach-prima2/Makefile.boot
+++ b/arch/arm/mach-prima2/Makefile.boot
@@ -1,3 +1,5 @@
 zreladdr-y              += 0x00008000
 params_phys-y           := 0x00000100
 initrd_phys-y           := 0x00800000
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index fe2d1f80ef50..8e6288de69b9 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -25,6 +25,18 @@ config PXA_V7_MACH_AUTO
 if !ARCH_PXA_V7
 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+config MACH_PXA3XX_DT
+        bool "Support PXA3xx platforms from device tree"
+        select PXA3xx
+        select CPU_PXA300
+        select POWER_SUPPLY
+        select HAVE_PWM
+        select USE_OF
+        help
+          Include support for Marvell PXA3xx based platforms using
+          the device tree. Needn't select any other machine while
+          MACH_PXA3XX_DT is enabled.
 config ARCH_LUBBOCK
        bool "Intel DBPXA250 Development Platform (aka Lubbock)"
        select PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index be0f7df8685c..2bedc9ed076c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -26,6 +26,9 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 # NOTE: keep the order of boards in accordance to their order in Kconfig
+# Device Tree support
+obj-$(CONFIG_MACH_PXA3XX_DT)    += pxa-dt.o
 # Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)      += lubbock.o
 obj-$(CONFIG_MACH_MAINSTONE)    += mainstone.o
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
index 2a37a9a8f621..d4e9499832dc 100644
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -127,8 +127,10 @@ void clk_pxa3xx_cken_enable(struct clk *clk)
        if (clk->cken < 32)
                CKENA |= mask;
-        else
+        else if (clk->cken < 64)
                CKENB |= mask;
+        else
+                CKENC |= mask;
 }
 void clk_pxa3xx_cken_disable(struct clk *clk)
@@ -137,8 +139,10 @@ void clk_pxa3xx_cken_disable(struct clk *clk)
        if (clk->cken < 32)
                CKENA &= ~mask;
-        else
+        else if (clk->cken < 64)
                CKENB &= ~mask;
+        else
+                CKENC &= ~mask;
 }
 const struct clkops clk_pxa3xx_cken_ops = {
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 207ecb49a61b..f4d48d20754e 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -131,6 +131,7 @@
 #define AICSR           __REG(0x41340008)       /* Application Subsystem Interrupt Control/Status Register */
 #define CKENA           __REG(0x4134000C)       /* A Clock Enable Register */
 #define CKENB           __REG(0x41340010)       /* B Clock Enable Register */
+#define CKENC           __REG(0x41340024)       /* C Clock Enable Register */
 #define AC97_DIV        __REG(0x41340014)       /* AC97 clock divisor value register */
 #define ACCR_XPDIS              (1 << 31)       /* Core PLL Output Disable */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5dae15ea6718..b6cc1816463e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,6 +17,8 @@
 #include <linux/syscore_ops.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/exception.h>
@@ -25,8 +27,6 @@
 #include "generic.h"
-#define IRQ_BASE                io_p2v(0x40d00000)
 #define ICIP                    (0x000)
 #define ICMR                    (0x004)
 #define ICLR                    (0x008)
@@ -48,22 +48,19 @@
 * This is for peripheral IRQs internal to the PXA chip.
 */
+static void __iomem *pxa_irq_base;
 static int pxa_internal_irq_nr;
+static bool cpu_has_ipr;
-static inline int cpu_has_ipr(void)
-{
-        return !cpu_is_pxa25x();
-}
 static inline void __iomem *irq_base(int i)
 {
-        static unsigned long phys_base[] = {
+        static unsigned long phys_base_offset[] = {
-                0x40d00000,
+                0x0,
-                0x40d0009c,
+                0x9c,
-                0x40d00130,
+                0x130,
        };
-        return io_p2v(phys_base[i]);
+        return pxa_irq_base + phys_base_offset[i];
 }
 void pxa_mask_irq(struct irq_data *d)
@@ -96,8 +93,8 @@ asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
        uint32_t icip, icmr, mask;
        do {
-                icip = __raw_readl(IRQ_BASE + ICIP);
+                icip = __raw_readl(pxa_irq_base + ICIP);
-                icmr = __raw_readl(IRQ_BASE + ICMR);
+                icmr = __raw_readl(pxa_irq_base + ICMR);
                mask = icip & icmr;
                if (mask == 0)
@@ -128,6 +125,8 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
        BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
        pxa_internal_irq_nr = irq_nr;
+        cpu_has_ipr = !cpu_is_pxa25x();
+        pxa_irq_base = io_p2v(0x40d00000);
        for (n = 0; n < irq_nr; n += 32) {
                void __iomem *base = irq_base(n >> 5);
@@ -136,8 +135,8 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
                __raw_writel(0, base + ICLR);   /* all IRQs are IRQ, not FIQ */
                for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
                        /* initialize interrupt priority */
-                        if (cpu_has_ipr())
+                        if (cpu_has_ipr)
-                                __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+                                __raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i));
                        irq = PXA_IRQ(i);
                        irq_set_chip_and_handler(irq, &pxa_internal_irq_chip,
@@ -168,9 +167,9 @@ static int pxa_irq_suspend(void)
                __raw_writel(0, base + ICMR);
        }
-        if (cpu_has_ipr()) {
+        if (cpu_has_ipr) {
                for (i = 0; i < pxa_internal_irq_nr; i++)
-                        saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
+                        saved_ipr[i] = __raw_readl(pxa_irq_base + IPR(i));
        }
        return 0;
@@ -187,11 +186,11 @@ static void pxa_irq_resume(void)
                __raw_writel(0, base + ICLR);
        }
-        if (cpu_has_ipr())
+        if (cpu_has_ipr)
                for (i = 0; i < pxa_internal_irq_nr; i++)
-                        __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
+                        __raw_writel(saved_ipr[i], pxa_irq_base + IPR(i));
-        __raw_writel(1, IRQ_BASE + ICCR);
+        __raw_writel(1, pxa_irq_base + ICCR);
 }
 #else
 #define pxa_irq_suspend         NULL
@@ -202,3 +201,93 @@ struct syscore_ops pxa_irq_syscore_ops = {
        .suspend        = pxa_irq_suspend,
        .resume         = pxa_irq_resume,
 };
+#ifdef CONFIG_OF
+static struct irq_domain *pxa_irq_domain;
+static int pxa_irq_map(struct irq_domain *h, unsigned int virq,
+                       irq_hw_number_t hw)
+{
+        void __iomem *base = irq_base(hw / 32);
+        /* initialize interrupt priority */
+        if (cpu_has_ipr)
+                __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw));
+        irq_set_chip_and_handler(hw, &pxa_internal_irq_chip,
+                                 handle_level_irq);
+        irq_set_chip_data(hw, base);
+        set_irq_flags(hw, IRQF_VALID);
+        return 0;
+}
+static struct irq_domain_ops pxa_irq_ops = {
+        .map    = pxa_irq_map,
+        .xlate  = irq_domain_xlate_onecell,
+};
+static const struct of_device_id intc_ids[] __initconst = {
+        { .compatible = "marvell,pxa-intc", },
+        {}
+};
+void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
+{
+        struct device_node *node;
+        const struct of_device_id *of_id;
+        struct pxa_intc_conf *conf;
+        struct resource res;
+        int n, ret;
+        node = of_find_matching_node(NULL, intc_ids);
+        if (!node) {
+                pr_err("Failed to find interrupt controller in arch-pxa\n");
+                return;
+        }
+        of_id = of_match_node(intc_ids, node);
+        conf = of_id->data;
+        ret = of_property_read_u32(node, "marvell,intc-nr-irqs",
+                                   &pxa_internal_irq_nr);
+        if (ret) {
+                pr_err("Not found marvell,intc-nr-irqs property\n");
+                return;
+        }
+        ret = of_address_to_resource(node, 0, &res);
+        if (ret < 0) {
+                pr_err("No registers defined for node\n");
+                return;
+        }
+        pxa_irq_base = io_p2v(res.start);
+        if (of_find_property(node, "marvell,intc-priority", NULL))
+                cpu_has_ipr = 1;
+        ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
+        if (ret < 0) {
+                pr_err("Failed to allocate IRQ numbers\n");
+                return;
+        }
+        pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0,
+                                               &pxa_irq_ops, NULL);
+        if (!pxa_irq_domain)
+                panic("Unable to add PXA IRQ domain\n");
+        irq_set_default_host(pxa_irq_domain);
+        for (n = 0; n < pxa_internal_irq_nr; n += 32) {
+                void __iomem *base = irq_base(n >> 5);
+                __raw_writel(0, base + ICMR);   /* disable all IRQs */
+                __raw_writel(0, base + ICLR);   /* all IRQs are IRQ, not FIQ */
+        }
+        /* only unmasked interrupts kick us out of idle */
+        __raw_writel(1, irq_base(0) + ICCR);
+        pxa_internal_irq_chip.irq_set_wake = fn;
+}
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
new file mode 100644
index 000000000000..c9192cea0033
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -0,0 +1,63 @@
+/*
+ *  linux/arch/arm/mach-pxa/pxa-dt.c
+ *
+ *  Copyright (C) 2012 Daniel Mack
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/pxa3xx.h>
+#include "generic.h"
+#ifdef CONFIG_PXA3xx
+extern void __init pxa3xx_dt_init_irq(void);
+static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
+        OF_DEV_AUXDATA("mrvl,pxa-uart",         0x40100000, "pxa2xx-uart.0", NULL),
+        OF_DEV_AUXDATA("mrvl,pxa-uart",         0x40200000, "pxa2xx-uart.1", NULL),
+        OF_DEV_AUXDATA("mrvl,pxa-uart",         0x40700000, "pxa2xx-uart.2", NULL),
+        OF_DEV_AUXDATA("mrvl,pxa-uart",         0x41600000, "pxa2xx-uart.3", NULL),
+        OF_DEV_AUXDATA("marvell,pxa-mmc",       0x41100000, "pxa2xx-mci.0", NULL),
+        OF_DEV_AUXDATA("mrvl,pxa-gpio",         0x40e00000, "pxa-gpio", NULL),
+        OF_DEV_AUXDATA("marvell,pxa-ohci",      0x4c000000, "pxa27x-ohci", NULL),
+        OF_DEV_AUXDATA("mrvl,pxa-i2c",          0x40301680, "pxa2xx-i2c.0", NULL),
+        OF_DEV_AUXDATA("mrvl,pwri2c",           0x40f500c0, "pxa3xx-i2c.1", NULL),
+        OF_DEV_AUXDATA("marvell,pxa3xx-nand",   0x43100000, "pxa3xx-nand", NULL),
+        {}
+};
+static void __init pxa3xx_dt_init(void)
+{
+        of_platform_populate(NULL, of_default_bus_match_table,
+                             pxa3xx_auxdata_lookup, NULL);
+}
+static const char *pxa3xx_dt_board_compat[] __initdata = {
+        "marvell,pxa300",
+        "marvell,pxa310",
+        "marvell,pxa320",
+        NULL,
+};
+#endif
+#ifdef CONFIG_PXA3xx
+DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
+        .map_io         = pxa3xx_map_io,
+        .init_irq       = pxa3xx_dt_init_irq,
+        .handle_irq     = pxa3xx_handle_irq,
+        .timer          = &pxa_timer,
+        .restart        = pxa_restart,
+        .init_machine   = pxa3xx_dt_init,
+        .dt_compat      = pxa3xx_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index dffb7e813d98..ff9c9574ec3e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/syscore_ops.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -40,6 +41,8 @@
 #define PECR_IE(n)      ((1 << ((n) * 2)) << 28)
 #define PECR_IS(n)      ((1 << ((n) * 2)) << 29)
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
 static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
@@ -382,7 +385,7 @@ static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
        pxa_ext_wakeup_chip.irq_set_wake = fn;
 }
-void __init pxa3xx_init_irq(void)
+static void __init __pxa3xx_init_irq(void)
 {
        /* enable CP6 access */
        u32 value;
@@ -390,10 +393,23 @@ void __init pxa3xx_init_irq(void)
        value |= (1 << 6);
        __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
-        pxa_init_irq(56, pxa3xx_set_wake);
        pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 }
+void __init pxa3xx_init_irq(void)
+{
+        __pxa3xx_init_irq();
+        pxa_init_irq(56, pxa3xx_set_wake);
+}
+#ifdef CONFIG_OF
+void __init pxa3xx_dt_init_irq(void)
+{
+        __pxa3xx_init_irq();
+        pxa_dt_irq_init(pxa3xx_set_wake);
+}
+#endif  /* CONFIG_OF */
 static struct map_desc pxa3xx_io_desc[] __initdata = {
        {       /* Mem Ctl */
                .virtual        = (unsigned long)SMEMC_VIRT,
@@ -466,7 +482,8 @@ static int __init pxa3xx_init(void)
                register_syscore_ops(&pxa3xx_mfp_syscore_ops);
                register_syscore_ops(&pxa3xx_clock_syscore_ops);
-                ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+                if (!of_have_populated_dt())
+                        ret = platform_add_devices(devices, ARRAY_SIZE(devices));
        }
        return ret;
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 45868bb43cbd..ff007d15e0ec 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,7 +30,6 @@
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
-#include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
 #include <mach/hardware.h>
@@ -226,115 +225,10 @@ struct mmci_platform_data realview_mmc1_plat_data = {
        .cd_invert      = true,
 };
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
-        .ref            = 24000000,
-        .vco_max        = ICST307_VCO_MAX,
-        .vco_min        = ICST307_VCO_MIN,
-        .vd_min         = 4 + 8,
-        .vd_max         = 511 + 8,
-        .rd_min         = 1 + 2,
-        .rd_max         = 127 + 2,
-        .s2div          = icst307_s2div,
-        .idx2s          = icst307_idx2s,
-};
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-        void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-        u32 val;
-        val = readl(clk->vcoreg) & ~0x7ffff;
-        val |= vco.v | (vco.r << 9) | (vco.s << 16);
-        writel(0xa05f, sys_lock);
-        writel(val, clk->vcoreg);
-        writel(0, sys_lock);
-}
-static const struct clk_ops oscvco_clk_ops = {
-        .round  = icst_clk_round,
-        .set    = icst_clk_set,
-        .setvco = realview_oscvco_set,
-};
-static struct clk oscvco_clk = {
-        .ops    = &oscvco_clk_ops,
-        .params = &realview_oscvco_params,
-};
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-        .rate   = 24000000,
-};
-static struct clk sp804_clk = {
-        .rate   = 1000000,
-};
-static struct clk dummy_apb_pclk;
-static struct clk_lookup lookups[] = {
-        {       /* Bus clock */
-                .con_id         = "apb_pclk",
-                .clk            = &dummy_apb_pclk,
-        }, {    /* UART0 */
-                .dev_id         = "dev:uart0",
-                .clk            = &ref24_clk,
-        }, {    /* UART1 */
-                .dev_id         = "dev:uart1",
-                .clk            = &ref24_clk,
-        }, {    /* UART2 */
-                .dev_id         = "dev:uart2",
-                .clk            = &ref24_clk,
-        }, {    /* UART3 */
-                .dev_id         = "fpga:uart3",
-                .clk            = &ref24_clk,
-        }, {    /* UART3 is on the dev chip in PB1176 */
-                .dev_id         = "dev:uart3",
-                .clk            = &ref24_clk,
-        }, {    /* UART4 only exists in PB1176 */
-                .dev_id         = "fpga:uart4",
-                .clk            = &ref24_clk,
-        }, {    /* KMI0 */
-                .dev_id         = "fpga:kmi0",
-                .clk            = &ref24_clk,
-        }, {    /* KMI1 */
-                .dev_id         = "fpga:kmi1",
-                .clk            = &ref24_clk,
-        }, {    /* MMC0 */
-                .dev_id         = "fpga:mmc0",
-                .clk            = &ref24_clk,
-        }, {    /* CLCD is in the PB1176 and EB DevChip */
-                .dev_id         = "dev:clcd",
-                .clk            = &oscvco_clk,
-        }, {    /* PB:CLCD */
-                .dev_id         = "issp:clcd",
-                .clk            = &oscvco_clk,
-        }, {    /* SSP */
-                .dev_id         = "dev:ssp0",
-                .clk            = &ref24_clk,
-        }, {    /* SP804 timers */
-                .dev_id         = "sp804",
-                .clk            = &sp804_clk,
-        },
-};
 void __init realview_init_early(void)
 {
        void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
-        if (machine_is_realview_pb1176())
-                oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
-        else
-                oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
        versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
 }
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
deleted file mode 100644
index e58d0771b64e..000000000000
--- a/arch/arm/mach-realview/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-#include <plat/clock.h>
-struct clk {
-        unsigned long           rate;
-        const struct clk_ops    *ops;
-        const struct icst_params *params;
-        void __iomem            *vcoreg;
-};
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index d7a6e9cebba4..ce7747692c8b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,6 +27,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -413,6 +414,7 @@ static void __init realview_eb_timer_init(void)
        else
                timer_irq = IRQ_EB_TIMER0_1;
+        realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
        realview_timer_init(timer_irq);
        realview_eb_twd_init();
 }
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 361f898884c8..e21711d72ee2 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -325,6 +326,7 @@ static void __init realview_pb1176_timer_init(void)
        timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
        timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
+        realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
        realview_timer_init(IRQ_DC1176_TIMER0);
 }
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index c56bc8d4d11b..b442fb276d57 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,6 +27,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -311,6 +312,7 @@ static void __init realview_pb11mp_timer_init(void)
        timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
        timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
+        realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
        realview_timer_init(IRQ_TC11MP_TIMER0_1);
        realview_pb11mp_twd_init();
 }
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 040937582453..1435cd863965 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,6 +27,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -260,6 +261,7 @@ static void __init realview_pba8_timer_init(void)
        timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
        timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+        realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
        realview_timer_init(IRQ_PBA8_TIMER0_1);
 }
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 97885dc11e8c..5d2c8bebb069 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,6 +26,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -319,6 +320,7 @@ static void __init realview_pbx_timer_init(void)
        timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
        timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+        realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
        realview_timer_init(IRQ_PBX_TIMER0_1);
        realview_pbx_twd_init();
 }
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 498efd99338d..5e410192ffb8 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,3 +7,7 @@ __ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
 #
 #params_phys-y (Instead: Pass atags pointer in r2)
 #initrd_phys-y (Instead: Use compiled-in initramfs)
+dtb-$(CONFIG_MACH_KZM9G) += sh73a0-kzm9g.dtb
+dtb-$(CONFIG_MACH_KZM9D) += emev2-kzm9d.dtb
+dtb-$(CONFIG_MACH_ARMADILLO800EVA) += r8a7740-armadillo800eva.dtb
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 7a1bb62ddcf0..54c16aade475 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -3,9 +3,13 @@ params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-tec.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 53d3d46dec12..a258996d954b 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@ config UX500_SOC_COMMON
        select CACHE_L2X0
        select PINCTRL
        select PINCTRL_NOMADIK
+        select COMMON_CLK
 config UX500_SOC_DB8500
        bool
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 026086ff9e6c..5691ef679d01 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U8500 machine.
 #
-obj-y                           := clock.o cpu.o devices.o devices-common.o \
+obj-y                           := cpu.o devices.o devices-common.o \
                                   id.o usb.o timer.o
 obj-$(CONFIG_CPU_IDLE)          += cpuidle.o
 obj-$(CONFIG_CACHE_L2X0)        += cache-l2x0.o
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
deleted file mode 100644
index 8d73b066a18d..000000000000
--- a/arch/arm/mach-ux500/clock.c
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- *  Copyright (C) 2009 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
-#include <plat/mtu.h>
-#include <mach/hardware.h>
-#include "clock.h"
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>      /* for copy_from_user */
-static LIST_HEAD(clk_list);
-#endif
-#define PRCC_PCKEN              0x00
-#define PRCC_PCKDIS             0x04
-#define PRCC_KCKEN              0x08
-#define PRCC_KCKDIS             0x0C
-#define PRCM_YYCLKEN0_MGT_SET   0x510
-#define PRCM_YYCLKEN1_MGT_SET   0x514
-#define PRCM_YYCLKEN0_MGT_CLR   0x518
-#define PRCM_YYCLKEN1_MGT_CLR   0x51C
-#define PRCM_YYCLKEN0_MGT_VAL   0x520
-#define PRCM_YYCLKEN1_MGT_VAL   0x524
-#define PRCM_SVAMMDSPCLK_MGT    0x008
-#define PRCM_SIAMMDSPCLK_MGT    0x00C
-#define PRCM_SGACLK_MGT         0x014
-#define PRCM_UARTCLK_MGT        0x018
-#define PRCM_MSP02CLK_MGT       0x01C
-#define PRCM_MSP1CLK_MGT        0x288
-#define PRCM_I2CCLK_MGT         0x020
-#define PRCM_SDMMCCLK_MGT       0x024
-#define PRCM_SLIMCLK_MGT        0x028
-#define PRCM_PER1CLK_MGT        0x02C
-#define PRCM_PER2CLK_MGT        0x030
-#define PRCM_PER3CLK_MGT        0x034
-#define PRCM_PER5CLK_MGT        0x038
-#define PRCM_PER6CLK_MGT        0x03C
-#define PRCM_PER7CLK_MGT        0x040
-#define PRCM_LCDCLK_MGT         0x044
-#define PRCM_BMLCLK_MGT         0x04C
-#define PRCM_HSITXCLK_MGT       0x050
-#define PRCM_HSIRXCLK_MGT       0x054
-#define PRCM_HDMICLK_MGT        0x058
-#define PRCM_APEATCLK_MGT       0x05C
-#define PRCM_APETRACECLK_MGT    0x060
-#define PRCM_MCDECLK_MGT        0x064
-#define PRCM_IPI2CCLK_MGT       0x068
-#define PRCM_DSIALTCLK_MGT      0x06C
-#define PRCM_DMACLK_MGT         0x074
-#define PRCM_B2R2CLK_MGT        0x078
-#define PRCM_TVCLK_MGT          0x07C
-#define PRCM_TCR                0x1C8
-#define PRCM_TCR_STOPPED        (1 << 16)
-#define PRCM_TCR_DOZE_MODE      (1 << 17)
-#define PRCM_UNIPROCLK_MGT      0x278
-#define PRCM_SSPCLK_MGT         0x280
-#define PRCM_RNGCLK_MGT         0x284
-#define PRCM_UICCCLK_MGT        0x27C
-#define PRCM_MGT_ENABLE         (1 << 8)
-static DEFINE_SPINLOCK(clocks_lock);
-static void __clk_enable(struct clk *clk)
-{
-        if (clk->enabled++ == 0) {
-                if (clk->parent_cluster)
-                        __clk_enable(clk->parent_cluster);
-                if (clk->parent_periph)
-                        __clk_enable(clk->parent_periph);
-                if (clk->ops && clk->ops->enable)
-                        clk->ops->enable(clk);
-        }
-}
-int clk_enable(struct clk *clk)
-{
-        unsigned long flags;
-        spin_lock_irqsave(&clocks_lock, flags);
-        __clk_enable(clk);
-        spin_unlock_irqrestore(&clocks_lock, flags);
-        return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-static void __clk_disable(struct clk *clk)
-{
-        if (--clk->enabled == 0) {
-                if (clk->ops && clk->ops->disable)
-                        clk->ops->disable(clk);
-                if (clk->parent_periph)
-                        __clk_disable(clk->parent_periph);
-                if (clk->parent_cluster)
-                        __clk_disable(clk->parent_cluster);
-        }
-}
-void clk_disable(struct clk *clk)
-{
-        unsigned long flags;
-        WARN_ON(!clk->enabled);
-        spin_lock_irqsave(&clocks_lock, flags);
-        __clk_disable(clk);
-        spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-/*
- * The MTU has a separate, rather complex muxing setup
- * with alternative parents (peripheral cluster or
- * ULP or fixed 32768 Hz) depending on settings
- */
-static unsigned long clk_mtu_get_rate(struct clk *clk)
-{
-        void __iomem *addr;
-        u32 tcr;
-        int mtu = (int) clk->data;
-        /*
-         * One of these is selected eventually
-         * TODO: Replace the constant with a reference
-         * to the ULP source once this is modeled.
-         */
-        unsigned long clk32k = 32768;
-        unsigned long mturate;
-        unsigned long retclk;
-        if (cpu_is_u8500_family())
-                addr = __io_address(U8500_PRCMU_BASE);
-        else
-                ux500_unknown_soc();
-        /*
-         * On a startup, always conifgure the TCR to the doze mode;
-         * bootloaders do it for us. Do this in the kernel too.
-         */
-        writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
-        tcr = readl(addr + PRCM_TCR);
-        /* Get the rate from the parent as a default */
-        if (clk->parent_periph)
-                mturate = clk_get_rate(clk->parent_periph);
-        else if (clk->parent_cluster)
-                mturate = clk_get_rate(clk->parent_cluster);
-        else
-                /* We need to be connected SOMEWHERE */
-                BUG();
-        /* Return the clock selected for this MTU */
-        if (tcr & (1 << mtu))
-                retclk = clk32k;
-        else
-                retclk = mturate;
-        pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
-        return retclk;
-}
-unsigned long clk_get_rate(struct clk *clk)
-{
-        unsigned long rate;
-        /*
-         * If there is a custom getrate callback for this clock,
-         * it will take precedence.
-         */
-        if (clk->get_rate)
-                return clk->get_rate(clk);
-        if (clk->ops && clk->ops->get_rate)
-                return clk->ops->get_rate(clk);
-        rate = clk->rate;
-        if (!rate) {
-                if (clk->parent_periph)
-                        rate = clk_get_rate(clk->parent_periph);
-                else if (clk->parent_cluster)
-                        rate = clk_get_rate(clk->parent_cluster);
-        }
-        return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-        /*TODO*/
-        return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-        clk->rate = rate;
-        return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-        /*TODO*/
-        return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-static void clk_prcmu_enable(struct clk *clk)
-{
-        void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
-                                   + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
-        writel(1 << clk->prcmu_cg_bit, cg_set_reg);
-}
-static void clk_prcmu_disable(struct clk *clk)
-{
-        void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
-                                   + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
-        writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
-}
-static struct clkops clk_prcmu_ops = {
-        .enable = clk_prcmu_enable,
-        .disable = clk_prcmu_disable,
-};
-static unsigned int clkrst_base[] = {
-        [1] = U8500_CLKRST1_BASE,
-        [2] = U8500_CLKRST2_BASE,
-        [3] = U8500_CLKRST3_BASE,
-        [5] = U8500_CLKRST5_BASE,
-        [6] = U8500_CLKRST6_BASE,
-};
-static void clk_prcc_enable(struct clk *clk)
-{
-        void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-        if (clk->prcc_kernel != -1)
-                writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-        if (clk->prcc_bus != -1)
-                writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-}
-static void clk_prcc_disable(struct clk *clk)
-{
-        void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-        if (clk->prcc_bus != -1)
-                writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
-        if (clk->prcc_kernel != -1)
-                writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
-}
-static struct clkops clk_prcc_ops = {
-        .enable = clk_prcc_enable,
-        .disable = clk_prcc_disable,
-};
-static struct clk clk_32khz = {
-        .name =  "clk_32khz",
-        .rate = 32000,
-};
-/*
- * PRCMU level clock gating
- */
-/* Bank 0 */
-static DEFINE_PRCMU_CLK(svaclk,         0x0, 2, SVAMMDSPCLK);
-static DEFINE_PRCMU_CLK(siaclk,         0x0, 3, SIAMMDSPCLK);
-static DEFINE_PRCMU_CLK(sgaclk,         0x0, 4, SGACLK);
-static DEFINE_PRCMU_CLK_RATE(uartclk,   0x0, 5, UARTCLK, 38400000);
-static DEFINE_PRCMU_CLK(msp02clk,       0x0, 6, MSP02CLK);
-static DEFINE_PRCMU_CLK(msp1clk,        0x0, 7, MSP1CLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(i2cclk,    0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk,  0x0, 9, SDMMCCLK, 100000000);
-static DEFINE_PRCMU_CLK(slimclk,        0x0, 10, SLIMCLK);
-static DEFINE_PRCMU_CLK(per1clk,        0x0, 11, PER1CLK);
-static DEFINE_PRCMU_CLK(per2clk,        0x0, 12, PER2CLK);
-static DEFINE_PRCMU_CLK(per3clk,        0x0, 13, PER3CLK);
-static DEFINE_PRCMU_CLK(per5clk,        0x0, 14, PER5CLK);
-static DEFINE_PRCMU_CLK_RATE(per6clk,   0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK(lcdclk,         0x0, 17, LCDCLK);
-static DEFINE_PRCMU_CLK(bmlclk,         0x0, 18, BMLCLK);
-static DEFINE_PRCMU_CLK(hsitxclk,       0x0, 19, HSITXCLK);
-static DEFINE_PRCMU_CLK(hsirxclk,       0x0, 20, HSIRXCLK);
-static DEFINE_PRCMU_CLK(hdmiclk,        0x0, 21, HDMICLK);
-static DEFINE_PRCMU_CLK(apeatclk,       0x0, 22, APEATCLK);
-static DEFINE_PRCMU_CLK(apetraceclk,    0x0, 23, APETRACECLK);
-static DEFINE_PRCMU_CLK(mcdeclk,        0x0, 24, MCDECLK);
-static DEFINE_PRCMU_CLK(ipi2clk,        0x0, 25, IPI2CCLK);
-static DEFINE_PRCMU_CLK(dsialtclk,      0x0, 26, DSIALTCLK); /* v1 */
-static DEFINE_PRCMU_CLK(dmaclk,         0x0, 27, DMACLK);
-static DEFINE_PRCMU_CLK(b2r2clk,        0x0, 28, B2R2CLK);
-static DEFINE_PRCMU_CLK(tvclk,          0x0, 29, TVCLK);
-static DEFINE_PRCMU_CLK(uniproclk,      0x0, 30, UNIPROCLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(sspclk,    0x0, 31, SSPCLK, 48000000); /* v1 */
-/* Bank 1 */
-static DEFINE_PRCMU_CLK(rngclk,         0x4, 0, RNGCLK); /* v1 */
-static DEFINE_PRCMU_CLK(uiccclk,        0x4, 1, UICCCLK); /* v1 */
-/*
- * PRCC level clock gating
- * Format: per#, clk, PCKEN bit, KCKEN bit, parent
- */
-/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, msp3,         11, 10, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, i2c4,         10, 9, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, gpio0,        9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0,     8,  8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3,         7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2,         6,  6, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, sdi0,         5,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1,         4,  4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0,         3,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1,         2,  2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1,        1,  1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0,        0,  0, &clk_uartclk);
-/* Peripheral Cluster #2 */
-static DEFINE_PRCC_CLK(2, gpio1,        11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx,        10,  7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx,         9,  6, NULL);
-static DEFINE_PRCC_CLK(2, spi0,         8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3,         7,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1,         6,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2,         5,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4,         4,  2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl,          3,  1, NULL);
-static DEFINE_PRCC_CLK(2, spi1,         2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2,         1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3,         0,  0, &clk_i2cclk);
-/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2,        8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5,         7,  7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2,        6,  6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske,          5,  5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2,         4,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0,         3,  3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1,         2,  2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0,         1,  1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc,         0, -1, NULL);
-/* Peripheral Cluster #4 is in the always on domain */
-/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3,        1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb,          0,  0, NULL);
-/* Peripheral Cluster #6 */
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg,       7,  7, NULL);
-static DEFINE_PRCC_CLK(6, hash1,        6, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro,       5,  1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka,          4, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0,        3, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0,        2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp1,    1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng,  0,  0, &clk_rngclk);
-static struct clk clk_dummy_apb_pclk = {
-        .name = "apb_pclk",
-};
-static struct clk_lookup u8500_clks[] = {
-        CLK(dummy_apb_pclk, NULL,       "apb_pclk"),
-        /* Peripheral Cluster #1 */
-        CLK(gpio0,      "gpio.0",       NULL),
-        CLK(gpio0,      "gpio.1",       NULL),
-        CLK(slimbus0,   "slimbus0",     NULL),
-        CLK(i2c2,       "nmk-i2c.2",    NULL),
-        CLK(sdi0,       "sdi0",         NULL),
-        CLK(msp0,       "ux500-msp-i2s.0",      NULL),
-        CLK(i2c1,       "nmk-i2c.1",    NULL),
-        CLK(uart1,      "uart1",        NULL),
-        CLK(uart0,      "uart0",        NULL),
-        /* Peripheral Cluster #3 */
-        CLK(gpio2,      "gpio.2",       NULL),
-        CLK(gpio2,      "gpio.3",       NULL),
-        CLK(gpio2,      "gpio.4",       NULL),
-        CLK(gpio2,      "gpio.5",       NULL),
-        CLK(sdi5,       "sdi5",         NULL),
-        CLK(uart2,      "uart2",        NULL),
-        CLK(ske,        "ske",          NULL),
-        CLK(ske,        "nmk-ske-keypad",       NULL),
-        CLK(sdi2,       "sdi2",         NULL),
-        CLK(i2c0,       "nmk-i2c.0",    NULL),
-        CLK(fsmc,       "fsmc",         NULL),
-        /* Peripheral Cluster #5 */
-        CLK(gpio3,      "gpio.8",       NULL),
-        /* Peripheral Cluster #6 */
-        CLK(hash1,      "hash1",        NULL),
-        CLK(pka,        "pka",          NULL),
-        CLK(hash0,      "hash0",        NULL),
-        CLK(cryp0,      "cryp0",        NULL),
-        CLK(cryp1,  "cryp1",    NULL),
-        /* PRCMU level clock gating */
-        /* Bank 0 */
-        CLK(svaclk,     "sva",          NULL),
-        CLK(siaclk,     "sia",          NULL),
-        CLK(sgaclk,     "sga",          NULL),
-        CLK(slimclk,    "slim",         NULL),
-        CLK(lcdclk,     "lcd",          NULL),
-        CLK(bmlclk,     "bml",          NULL),
-        CLK(hsitxclk,   "stm-hsi.0",    NULL),
-        CLK(hsirxclk,   "stm-hsi.1",    NULL),
-        CLK(hdmiclk,    "hdmi",         NULL),
-        CLK(apeatclk,   "apeat",        NULL),
-        CLK(apetraceclk,        "apetrace",     NULL),
-        CLK(mcdeclk,    "mcde",         NULL),
-        CLK(ipi2clk,    "ipi2",         NULL),
-        CLK(dmaclk,     "dma40.0",      NULL),
-        CLK(b2r2clk,    "b2r2",         NULL),
-        CLK(tvclk,      "tv",           NULL),
-        /* Peripheral Cluster #1 */
-        CLK(i2c4,       "nmk-i2c.4",    NULL),
-        CLK(spi3,       "spi3",         NULL),
-        CLK(msp1,       "ux500-msp-i2s.1",      NULL),
-        CLK(msp3,       "ux500-msp-i2s.3",      NULL),
-        /* Peripheral Cluster #2 */
-        CLK(gpio1,      "gpio.6",       NULL),
-        CLK(gpio1,      "gpio.7",       NULL),
-        CLK(ssitx,      "ssitx",        NULL),
-        CLK(ssirx,      "ssirx",        NULL),
-        CLK(spi0,       "spi0",         NULL),
-        CLK(sdi3,       "sdi3",         NULL),
-        CLK(sdi1,       "sdi1",         NULL),
-        CLK(msp2,       "ux500-msp-i2s.2",      NULL),
-        CLK(sdi4,       "sdi4",         NULL),
-        CLK(pwl,        "pwl",          NULL),
-        CLK(spi1,       "spi1",         NULL),
-        CLK(spi2,       "spi2",         NULL),
-        CLK(i2c3,       "nmk-i2c.3",    NULL),
-        /* Peripheral Cluster #3 */
-        CLK(ssp1,       "ssp1",         NULL),
-        CLK(ssp0,       "ssp0",         NULL),
-        /* Peripheral Cluster #5 */
-        CLK(usb,        "musb-ux500.0", "usb"),
-        /* Peripheral Cluster #6 */
-        CLK(mtu1,       "mtu1",         NULL),
-        CLK(mtu0,       "mtu0",         NULL),
-        CLK(cfgreg,     "cfgreg",       NULL),
-        CLK(hash1,      "hash1",        NULL),
-        CLK(unipro,     "unipro",       NULL),
-        CLK(rng,        "rng",          NULL),
-        /* PRCMU level clock gating */
-        /* Bank 0 */
-        CLK(uniproclk,  "uniproclk",    NULL),
-        CLK(dsialtclk,  "dsialt",       NULL),
-        /* Bank 1 */
-        CLK(rngclk,     "rng",          NULL),
-        CLK(uiccclk,    "uicc",         NULL),
-};
-#ifdef CONFIG_DEBUG_FS
-/*
- *      debugfs support to trace clock tree hierarchy and attributes with
- *      powerdebug
- */
-static struct dentry *clk_debugfs_root;
-void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
-{
-        while (num--) {
-                /* Check that the clock has not been already registered */
-                if (!(cl->clk->list.prev != cl->clk->list.next))
-                        list_add_tail(&cl->clk->list, &clk_list);
-                cl++;
-        }
-}
-static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
-                                                  size_t size, loff_t *off)
-{
-        struct clk *clk = file->f_dentry->d_inode->i_private;
-        char cusecount[128];
-        unsigned int len;
-        len = sprintf(cusecount, "%u\n", clk->enabled);
-        return simple_read_from_buffer(buf, size, off, cusecount, len);
-}
-static ssize_t rate_dbg_read(struct file *file, char __user *buf,
-                                          size_t size, loff_t *off)
-{
-        struct clk *clk = file->f_dentry->d_inode->i_private;
-        char crate[128];
-        unsigned int rate;
-        unsigned int len;
-        rate = clk_get_rate(clk);
-        len = sprintf(crate, "%u\n", rate);
-        return simple_read_from_buffer(buf, size, off, crate, len);
-}
-static const struct file_operations usecount_fops = {
-        .read = usecount_dbg_read,
-};
-static const struct file_operations set_rate_fops = {
-        .read = rate_dbg_read,
-};
-static struct dentry *clk_debugfs_register_dir(struct clk *c,
-                                                struct dentry *p_dentry)
-{
-        struct dentry *d, *clk_d;
-        const char *p = c->name;
-        if (!p)
-                p = "BUG";
-        clk_d = debugfs_create_dir(p, p_dentry);
-        if (!clk_d)
-                return NULL;
-        d = debugfs_create_file("usecount", S_IRUGO,
-                                clk_d, c, &usecount_fops);
-        if (!d)
-                goto err_out;
-        d = debugfs_create_file("rate", S_IRUGO,
-                                clk_d, c, &set_rate_fops);
-        if (!d)
-                goto err_out;
-        /*
-         * TODO : not currently available in ux500
-         * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
-         * if (!d)
-         *      goto err_out;
-         */
-        return clk_d;
-err_out:
-        debugfs_remove_recursive(clk_d);
-        return NULL;
-}
-static int clk_debugfs_register_one(struct clk *c)
-{
-        struct clk *pa = c->parent_periph;
-        struct clk *bpa = c->parent_cluster;
-        if (!(bpa && !pa)) {
-                c->dent = clk_debugfs_register_dir(c,
-                                pa ? pa->dent : clk_debugfs_root);
-                if (!c->dent)
-                        return -ENOMEM;
-        }
-        if (bpa) {
-                c->dent_bus = clk_debugfs_register_dir(c,
-                                bpa->dent_bus ? bpa->dent_bus : bpa->dent);
-                if ((!c->dent_bus) &&  (c->dent)) {
-                        debugfs_remove_recursive(c->dent);
-                        c->dent = NULL;
-                        return -ENOMEM;
-                }
-        }
-        return 0;
-}
-static int clk_debugfs_register(struct clk *c)
-{
-        int err;
-        struct clk *pa = c->parent_periph;
-        struct clk *bpa = c->parent_cluster;
-        if (pa && (!pa->dent && !pa->dent_bus)) {
-                err = clk_debugfs_register(pa);
-                if (err)
-                        return err;
-        }
-        if (bpa && (!bpa->dent && !bpa->dent_bus)) {
-                err = clk_debugfs_register(bpa);
-                if (err)
-                        return err;
-        }
-        if ((!c->dent) && (!c->dent_bus)) {
-                err = clk_debugfs_register_one(c);
-                if (err)
-                        return err;
-        }
-        return 0;
-}
-int __init clk_debugfs_init(void)
-{
-        struct clk *c;
-        struct dentry *d;
-        int err;
-        d = debugfs_create_dir("clock", NULL);
-        if (!d)
-                return -ENOMEM;
-        clk_debugfs_root = d;
-        list_for_each_entry(c, &clk_list, list) {
-                err = clk_debugfs_register(c);
-                if (err)
-                        goto err_out;
-        }
-        return 0;
-err_out:
-        debugfs_remove_recursive(clk_debugfs_root);
-        return err;
-}
-#endif /* defined(CONFIG_DEBUG_FS) */
-unsigned long clk_smp_twd_rate = 500000000;
-unsigned long clk_smp_twd_get_rate(struct clk *clk)
-{
-        return clk_smp_twd_rate;
-}
-static struct clk clk_smp_twd = {
-        .get_rate = clk_smp_twd_get_rate,
-        .name =  "smp_twd",
-};
-static struct clk_lookup clk_smp_twd_lookup = {
-        .dev_id = "smp_twd",
-        .clk = &clk_smp_twd,
-};
-#ifdef CONFIG_CPU_FREQ
-static int clk_twd_cpufreq_transition(struct notifier_block *nb,
-                                      unsigned long state, void *data)
-{
-        struct cpufreq_freqs *f = data;
-        if (state == CPUFREQ_PRECHANGE) {
-                /* Save frequency in simple Hz */
-                clk_smp_twd_rate = (f->new * 1000) / 2;
-        }
-        return NOTIFY_OK;
-}
-static struct notifier_block clk_twd_cpufreq_nb = {
-        .notifier_call = clk_twd_cpufreq_transition,
-};
-int clk_init_smp_twd_cpufreq(void)
-{
-        return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
-                                  CPUFREQ_TRANSITION_NOTIFIER);
-}
-#endif
-int __init clk_init(void)
-{
-        clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-        clkdev_add(&clk_smp_twd_lookup);
-#ifdef CONFIG_DEBUG_FS
-        clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-#endif
-        return 0;
-}
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
deleted file mode 100644
index 65d27a13f46d..000000000000
--- a/arch/arm/mach-ux500/clock.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  Copyright (C) 2010 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/**
- * struct clkops - ux500 clock operations
- * @enable:     function to enable the clock
- * @disable:    function to disable the clock
- * @get_rate:   function to get the current clock rate
- *
- * This structure contains function pointers to functions that will be used to
- * control the clock.  All of these functions are optional.  If get_rate is
- * NULL, the rate in the struct clk will be used.
- */
-struct clkops {
-        void (*enable) (struct clk *);
-        void (*disable) (struct clk *);
-        unsigned long (*get_rate) (struct clk *);
-        int (*set_parent)(struct clk *, struct clk *);
-};
-/**
- * struct clk - ux500 clock structure
- * @ops:                pointer to clkops struct used to control this clock
- * @name:               name, for debugging
- * @enabled:            refcount. positive if enabled, zero if disabled
- * @get_rate:           custom callback for getting the clock rate
- * @data:               custom per-clock data for example for the get_rate
- *                      callback
- * @rate:               fixed rate for clocks which don't implement
- *                      ops->getrate
- * @prcmu_cg_off:       address offset of the combined enable/disable register
- *                      (used on u8500v1)
- * @prcmu_cg_bit:       bit in the combined enable/disable register (used on
- *                      u8500v1)
- * @prcmu_cg_mgt:       address of the enable/disable register (used on
- *                      u8500ed)
- * @cluster:            peripheral cluster number
- * @prcc_bus:           bit for the bus clock in the peripheral's CLKRST
- * @prcc_kernel:        bit for the kernel clock in the peripheral's CLKRST.
- *                      -1 if no kernel clock exists.
- * @parent_cluster:     pointer to parent's cluster clk struct
- * @parent_periph:      pointer to parent's peripheral clk struct
- *
- * Peripherals are organised into clusters, and each cluster has an associated
- * bus clock.  Some peripherals also have a parent peripheral clock.
- *
- * In order to enable a clock for a peripheral, we need to enable:
- *      (1) the parent cluster (bus) clock at the PRCMU level
- *      (2) the parent peripheral clock (if any) at the PRCMU level
- *      (3) the peripheral's bus & kernel clock at the PRCC level
- *
- * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
- * of the cluster and peripheral clocks, and hooking these as the parents of
- * the individual peripheral clocks.
- *
- * (3) is handled by specifying the bits in the PRCC control registers required
- * to enable these clocks and modifying them in the ->enable and
- * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
- *
- * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
- * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
- * prcc, and parent pointers are only used for the PRCC-level clocks.
- */
-struct clk {
-        const struct clkops     *ops;
-        const char              *name;
-        unsigned int            enabled;
-        unsigned long           (*get_rate)(struct clk *);
-        void                    *data;
-        unsigned long           rate;
-        struct list_head        list;
-        /* These three are only for PRCMU clks */
-        unsigned int            prcmu_cg_off;
-        unsigned int            prcmu_cg_bit;
-        unsigned int            prcmu_cg_mgt;
-        /* The rest are only for PRCC clks */
-        int                     cluster;
-        unsigned int            prcc_bus;
-        unsigned int            prcc_kernel;
-        struct clk              *parent_cluster;
-        struct clk              *parent_periph;
-#if defined(CONFIG_DEBUG_FS)
-        struct dentry           *dent;          /* For visible tree hierarchy */
-        struct dentry           *dent_bus;      /* For visible tree hierarchy */
-#endif
-};
-#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)         \
-struct clk clk_##_name = {                                      \
-                .name           = #_name,                       \
-                .ops            = &clk_prcmu_ops,               \
-                .prcmu_cg_off   = _cg_off,                      \
-                .prcmu_cg_bit   = _cg_bit,                      \
-                .prcmu_cg_mgt   = PRCM_##_reg##_MGT             \
-        }
-#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate)     \
-struct clk clk_##_name = {                                              \
-                .name           = #_name,                               \
-                .ops            = &clk_prcmu_ops,                       \
-                .prcmu_cg_off   = _cg_off,                              \
-                .prcmu_cg_bit   = _cg_bit,                              \
-                .rate           = _rate,                                \
-                .prcmu_cg_mgt   = PRCM_##_reg##_MGT                     \
-        }
-#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk)  \
-struct clk clk_##_name = {                                              \
-                .name           = #_name,                               \
-                .ops            = &clk_prcc_ops,                        \
-                .cluster        = _pclust,                              \
-                .prcc_bus       = _bus_en,                              \
-                .prcc_kernel    = _kernel_en,                           \
-                .parent_cluster = &clk_per##_pclust##clk,               \
-                .parent_periph  = _kernclk                              \
-        }
-#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
-struct clk clk_##_name = {                                              \
-                .name           = #_name,                               \
-                .ops            = &clk_prcc_ops,                        \
-                .cluster        = _pclust,                              \
-                .prcc_bus       = _bus_en,                              \
-                .prcc_kernel    = _kernel_en,                           \
-                .parent_cluster = &clk_per##_pclust##clk,               \
-                .parent_periph  = _kernclk,                             \
-                .get_rate       = _callback,                            \
-                .data           = (void *) _data                        \
-        }
-#define CLK(_clk, _devname, _conname)                   \
-        {                                               \
-                .clk    = &clk_##_clk,                  \
-                .dev_id = _devname,                     \
-                .con_id = _conname,                     \
-        }
-int __init clk_db8500_ed_fixup(void);
-int __init clk_init(void);
-#ifdef CONFIG_DEBUG_FS
-int clk_debugfs_init(void);
-#else
-static inline int clk_debugfs_init(void) { return 0; }
-#endif
-#ifdef CONFIG_CPU_FREQ
-int clk_init_smp_twd_cpufreq(void);
-#else
-static inline int clk_init_smp_twd_cpufreq(void) { return 0; }
-#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e2360e7c770d..17a78ec516ff 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -8,7 +8,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/clk.h>
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
@@ -17,6 +16,7 @@
 #include <linux/stat.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/platform_data/clk-ux500.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -25,8 +25,6 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include "clock.h"
 void __iomem *_PRCMU_BASE;
 /*
@@ -70,13 +68,17 @@ void __init ux500_init_irq(void)
         */
        if (cpu_is_u8500_family())
                db8500_prcmu_early_init();
-        clk_init();
+        if (cpu_is_u8500_family())
+                u8500_clk_init();
+        else if (cpu_is_u9540())
+                u9540_clk_init();
+        else if (cpu_is_u8540())
+                u8540_clk_init();
 }
 void __init ux500_init_late(void)
 {
-        clk_debugfs_init();
-        clk_init_smp_twd_cpufreq();
 }
 static const char * __init ux500_get_machine(void)
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 23a7643e9a87..1be0f4e5e6eb 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -15,8 +15,11 @@
 */
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
+#include <asm/cputype.h>
 #include <asm/hardware/cache-tauros2.h>
@@ -144,25 +147,8 @@ static inline void __init write_extra_features(u32 u)
        __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
 }
-static void __init disable_l2_prefetch(void)
-{
-        u32 u;
-        /*
-         * Read the CPU Extra Features register and verify that the
-         * Disable L2 Prefetch bit is set.
-         */
-        u = read_extra_features();
-        if (!(u & 0x01000000)) {
-                printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
-                write_extra_features(u | 0x01000000);
-        }
-}
 static inline int __init cpuid_scheme(void)
 {
-        extern int processor_id;
        return !!((processor_id & 0x000f0000) == 0x000f0000);
 }
@@ -189,12 +175,36 @@ static inline void __init write_actlr(u32 actlr)
        __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
 }
-void __init tauros2_init(void)
+static void enable_extra_feature(unsigned int features)
+{
+        u32 u;
+        u = read_extra_features();
+        if (features & CACHE_TAUROS2_PREFETCH_ON)
+                u &= ~0x01000000;
+        else
+                u |= 0x01000000;
+        printk(KERN_INFO "Tauros2: %s L2 prefetch.\n",
+                        (features & CACHE_TAUROS2_PREFETCH_ON)
+                        ? "Enabling" : "Disabling");
+        if (features & CACHE_TAUROS2_LINEFILL_BURST8)
+                u |= 0x00100000;
+        else
+                u &= ~0x00100000;
+        printk(KERN_INFO "Tauros2: %s line fill burt8.\n",
+                        (features & CACHE_TAUROS2_LINEFILL_BURST8)
+                        ? "Enabling" : "Disabling");
+        write_extra_features(u);
+}
+static void __init tauros2_internal_init(unsigned int features)
 {
-        extern int processor_id;
+        char *mode = NULL;
-        char *mode;
-        disable_l2_prefetch();
+        enable_extra_feature(features);
 #ifdef CONFIG_CPU_32v5
        if ((processor_id & 0xff0f0000) == 0x56050000) {
@@ -286,3 +296,34 @@ void __init tauros2_init(void)
        printk(KERN_INFO "Tauros2: L2 cache support initialised "
                         "in %s mode.\n", mode);
 }
+#ifdef CONFIG_OF
+static const struct of_device_id tauros2_ids[] __initconst = {
+        { .compatible = "marvell,tauros2-cache"},
+        {}
+};
+#endif
+void __init tauros2_init(unsigned int features)
+{
+#ifdef CONFIG_OF
+        struct device_node *node;
+        int ret;
+        unsigned int f;
+        node = of_find_matching_node(NULL, tauros2_ids);
+        if (!node) {
+                pr_info("Not found marvell,tauros2-cache, disable it\n");
+                return;
+        }
+        ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
+        if (ret) {
+                pr_info("Not found marvell,tauros-cache-features property, "
+                        "disable extra features\n");
+                features = 0;
+        } else
+                features = f;
+#endif
+        tauros2_internal_init(features);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7128e9710417..28ba09f4ebb9 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -52,7 +52,6 @@ extern void imx31_soc_init(void);
 extern void imx35_soc_init(void);
 extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
-extern void imx53_soc_init(void);
 extern void imx51_init_late(void);
 extern void imx53_init_late(void);
 extern void epit_timer_init(void __iomem *base, int irq);
@@ -137,11 +136,6 @@ extern void imx_src_prepare_restart(void);
 extern void imx_gpc_init(void);
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
-extern void imx51_babbage_common_init(void);
-extern void imx53_ard_common_init(void);
-extern void imx53_evk_common_init(void);
-extern void imx53_qsb_common_init(void);
-extern void imx53_smd_common_init(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
deleted file mode 100644
index 9761e003bde2..000000000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc..
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#ifndef __MACH_IOMUX_MX53_H__
-#define __MACH_IOMUX_MX53_H__
-#include <mach/iomux-v3.h>
-/* These 2 defines are for pins that may not have a mux register, but could
- * have a pad setting register, and vice-versa. */
-#define __NA_   0x00
-#define MX53_UART_PAD_CTRL              (PAD_CTL_PKE | PAD_CTL_PUE |    \
-                PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define MX53_SDHC_PAD_CTRL      (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-                                PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
-                                PAD_CTL_SRE_FAST)
-#define MX53_PAD_GPIO_19__KPP_COL_5                     IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__GPIO4_5                       IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__CCM_CLKO                      IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SPDIF_OUT1                    IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2          IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__ECSPI1_RDY                    IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__FEC_TDATA_3                   IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT                  IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__KPP_COL_0                    IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__GPIO4_6                      IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC              IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX                IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK                  IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3                  IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST               IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0                    IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__GPIO4_7                      IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD              IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX                IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI                  IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER                    IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__KPP_COL_1                    IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__GPIO4_8                      IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS             IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX                IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO                  IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK                   IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY              IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1                    IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__GPIO4_9                      IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD              IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX                IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0                   IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__FEC_COL                      IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID              IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__KPP_COL_2                    IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__GPIO4_10                     IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN                   IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_MDIO                     IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1                   IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2                  IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE             IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2                    IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__GPIO4_11                     IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN                   IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_MDC                      IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2                   IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2                  IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR              IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__KPP_COL_3                    IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__GPIO4_12                     IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP                 IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__SPDIF_IN1                    IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__I2C2_SCL                     IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3                   IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__FEC_CRS                      IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK             IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3                    IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__GPIO4_13                     IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM                 IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK             IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__I2C2_SDA                     IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT               IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP                 IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0          IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__KPP_COL_4                    IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__GPIO4_14                     IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN                   IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__IPU_SISG_4                   IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__UART5_RTS                    IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC             IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1          IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4                    IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__GPIO4_15                     IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN                   IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5                   IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__UART5_CTS                    IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR            IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID            IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK         IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16                 IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR         IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0  IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0          IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID           IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15               IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__GPIO4_17                    IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC             IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1     IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1             IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID              IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2                 IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__GPIO4_18                     IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD              IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2      IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2              IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION           IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3                 IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__GPIO4_19                     IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS             IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3      IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3              IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG                IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4                 IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__GPIO4_20                     IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD              IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP                    IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD             IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4              IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT       IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0            IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__GPIO4_21                   IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK                  IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0        IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN        IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5            IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY            IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1            IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__GPIO4_22                   IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI                  IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1        IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL       \
-                                                        IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6            IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID            IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2            IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__GPIO4_23                   IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO                  IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2        IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE            IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7            IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE           IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3            IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__GPIO4_24                   IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0                   IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3        IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR       IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8            IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR            IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4            IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__GPIO4_25                   IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1                   IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4        IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB         IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9            IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK           IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5            IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__GPIO4_26                   IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2                   IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5        IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS   IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10           IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0        IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6            IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__GPIO4_27                   IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3                   IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6        IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE  IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11           IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1        IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7            IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__GPIO4_28                   IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY                   IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7        IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12           IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID          IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8            IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__GPIO4_29                   IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO                  IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B               IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13           IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID             IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9            IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__GPIO4_30                   IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO                  IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B               IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14           IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0          IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10          IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__GPIO4_31                  IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP          IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3        \
-                                                        IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15          IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1         IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11          IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__GPIO5_5                   IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT          IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4        \
-                                                        IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16          IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2         IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12          IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__GPIO5_6                   IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK          IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5        \
-                                                        IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17          IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3         IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13          IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__GPIO5_7                   IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS          IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0        \
-                                                        IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18          IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4         IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14          IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__GPIO5_8                   IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC           IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1        \
-                                                        IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19          IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5         IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15          IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__GPIO5_9                   IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1                IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1                IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2        \
-                                                        IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20          IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6         IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16          IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__GPIO5_10                  IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI               IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC           IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0          IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3        \
-                                                        IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21          IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7         IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17          IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__GPIO5_11                  IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO               IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD           IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1          IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4        \
-                                                        IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22          IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18          IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__GPIO5_12                  IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0                IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS          IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS          IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5        \
-                                                        IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23          IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2             IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19          IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__GPIO5_13                  IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK               IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD           IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC           IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6        \
-                                                        IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24          IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3             IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20          IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__GPIO5_14                  IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK               IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC           IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7        \
-                                                        IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25          IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI              IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21          IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__GPIO5_15                  IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI               IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD           IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0   IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26          IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO              IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22          IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__GPIO5_16                  IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO               IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS          IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1   IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27          IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK              IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23          IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__GPIO5_17                  IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0                IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD           IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2   IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28          IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS              IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK           IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18                  IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0           IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29          IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC              IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__GPIO5_19                    IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK               IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1             IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30            IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL                  IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN         IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20                 IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2          IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31         IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK               IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC             IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21                   IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3            IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32           IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0               IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4                IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__GPIO5_22                    IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5                   IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK                 IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP            IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC             IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33            IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1                IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5                IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__GPIO5_23                    IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5                   IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI                 IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT            IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD             IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34            IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2                IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6                IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__GPIO5_24                    IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6                   IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO                 IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK            IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS            IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35            IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3                IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7                IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__GPIO5_25                    IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6                   IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0                  IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR            IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD             IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36            IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4                IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8                IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__GPIO5_26                    IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7                   IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK                 IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC             IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA                    IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37            IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5                IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9                IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__GPIO5_27                    IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7                   IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI                 IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR            IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL                    IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38            IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6                IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10              IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__GPIO5_28                   IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX              IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO                IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC            IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4            IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39           IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7               IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11              IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__GPIO5_29                   IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX              IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0                 IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS           IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5            IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40           IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8               IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12              IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__GPIO5_30                   IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX              IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0        IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6            IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41           IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9               IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13              IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__GPIO5_31                   IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX              IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1        IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7            IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42           IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10              IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14              IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__GPIO6_0                    IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX              IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2        IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8            IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43           IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11              IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15              IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__GPIO6_1                    IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX              IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3        IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9            IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44           IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12              IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16              IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__GPIO6_2                    IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__UART4_RTS                  IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4        IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10           IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45           IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13              IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17              IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__GPIO6_3                    IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__UART4_CTS                  IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5        IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11           IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46           IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14              IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18              IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__GPIO6_4                    IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__UART5_RTS                  IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6        IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12           IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47           IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15              IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19              IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__GPIO6_5                    IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__UART5_CTS                  IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7        IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13           IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48           IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK             IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25                 IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__GPIO5_2                       IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__ECSPI2_RDY                    IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12                 IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__CSPI_SS1                      IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS                 IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK                IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2                 IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__GPIO2_30                      IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK               IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS              IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0                    IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__I2C2_SCL                      IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16                 IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO3_16                      IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5                  IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK            IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK                   IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__I2C2_SDA                      IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17                 IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO3_17                      IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6                  IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN            IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__ECSPI1_MISO                   IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__I2C3_SCL                      IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18                 IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO3_18                      IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7                  IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO            IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI                   IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__I2C3_SDA                      IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS                 IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19                 IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__GPIO3_19                      IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8                  IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS             IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__ECSPI1_SS1                    IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EPIT1_EPITO                   IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__UART1_CTS                     IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC               IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20                 IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__GPIO3_20                      IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16                 IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS              IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__CSPI_SS0                      IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EPIT2_EPITO                   IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__UART1_RTS                     IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR              IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21                 IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__GPIO3_21                      IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17                 IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK            IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__CSPI_SCLK                     IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__I2C1_SCL                      IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC              IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22                 IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__GPIO3_22                      IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1                  IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN            IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__CSPI_MISO                     IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR             IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23                 IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__GPIO3_23                      IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART3_CTS                     IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART1_DCD                     IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS                 IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2                  IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN              IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14                 IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3                 IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__GPIO2_31                      IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART3_RTS                     IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART1_RI                      IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3                  IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC                IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16                 IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24                 IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__GPIO3_24                      IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX                 IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI1_SS2                    IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__CSPI_SS2                      IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS              IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI2_SS2                    IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART1_DTR                     IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25                 IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__GPIO3_25                      IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX                 IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI1_SS3                    IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__CSPI_SS3                      IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC               IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI2_SS3                    IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART1_DSR                     IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26                 IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__GPIO3_26                      IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX                 IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D26__FIRI_RXD                      IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1                  IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11                 IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_SISG_2                    IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22              IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27                 IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__GPIO3_27                      IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX                 IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D27__FIRI_TXD                      IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0                  IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13                 IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_SISG_3                    IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23              IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28                 IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__GPIO3_28                      IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__UART2_CTS                     IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO            IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__CSPI_MOSI                     IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA                      IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG                  IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13                 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29                 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__GPIO3_29                      IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__UART2_RTS                     IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS             IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__CSPI_SS0                      IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15                 IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC                IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14                 IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30                 IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__GPIO3_30                      IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__UART3_CTS                     IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3                  IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11                 IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21              IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC               IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC               IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31                 IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__GPIO3_31                      IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__UART3_RTS                     IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2                  IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12                 IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20              IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR              IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR              IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24                 IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__GPIO5_4                       IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19              IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19                 IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_SISG_2                    IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID                IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23                 IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__GPIO6_6                       IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18              IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18                 IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_SISG_3                    IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION            IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22                 IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__GPIO2_16                      IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17              IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17                 IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7                 IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21                 IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__GPIO2_17                      IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16              IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16                 IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6                 IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20                 IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__GPIO2_18                      IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15              IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15                 IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5                 IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19                 IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__GPIO2_19                      IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14              IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14                 IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4                 IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18                 IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__GPIO2_20                      IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13              IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13                 IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3                 IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17                 IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__GPIO2_21                      IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12              IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12                 IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2                 IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16                 IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__GPIO2_22                      IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK              IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK               IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1                 IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0                 IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__GPIO2_23                      IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK                   IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5                  IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1                 IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__GPIO2_24                      IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI                   IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6                  IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE                    IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__GPIO2_25                       IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__ECSPI2_MISO                    IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7                   IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG                  IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW                    IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__GPIO2_26                       IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__ECSPI2_SS0                     IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8                   IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT         IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA                  IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__GPIO2_27                      IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1                    IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17                 IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0                 IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0                 IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPIO2_28                      IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11              IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11                 IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY                  IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7                 IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1                 IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__GPIO2_29                      IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10              IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10                 IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6                 IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0            IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__GPIO3_0                       IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9               IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9                  IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5                 IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1            IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__GPIO3_1                       IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8               IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8                  IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4                 IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2            IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__GPIO3_2                       IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7               IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7                  IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3                 IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3            IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__GPIO3_3                       IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6               IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6                  IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2                 IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4            IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__GPIO3_4                       IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5               IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5                  IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7                 IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5            IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__GPIO3_5                       IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4               IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4                  IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6                 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6            IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__GPIO3_6                       IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3               IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3                  IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5                 IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7            IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__GPIO3_7                       IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2               IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2                  IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4                 IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8            IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__GPIO3_8                       IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1               IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1                  IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3                 IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9            IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__GPIO3_9                       IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0               IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0                  IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2                 IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10          IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__GPIO3_10                     IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15                IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN             IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1                IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11          IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__GPIO3_11                     IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2                 IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC               IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12          IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__GPIO3_12                     IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3                 IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC               IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13          IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__GPIO3_13                     IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS                IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK              IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14          IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__GPIO3_14                     IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS                IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK              IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15          IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__GPIO3_15                     IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1                 IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4                 IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B             IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__GPIO6_12                   IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B             IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__GPIO6_13                   IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT                IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__GPIO5_0                      IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B             IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22                  IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3             IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24                  IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2             IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26                  IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK             IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28                  IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1             IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30                  IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0             IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22                  IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3             IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24                  IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK             IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26                  IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2             IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28                  IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1             IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30                  IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0             IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__GPIO4_0                       IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT                IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_11__GPIO4_1                       IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_12__GPIO4_2                       IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_13__GPIO4_3                       IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_14__GPIO4_4                       IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE               IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__GPIO6_7                     IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0           IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE               IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__GPIO6_8                     IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1           IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B             IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__GPIO6_9                    IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2          IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0              IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__GPIO6_10                    IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3           IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0              IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__GPIO6_11                    IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4           IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1              IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__GPIO6_14                    IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK                  IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5           IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2              IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__GPIO6_15                    IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0                  IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0                   IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE                IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK               IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG                  IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6           IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3              IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__GPIO6_16                    IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1                  IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1                   IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26               IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT                  IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7           IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_MDIO                     IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__GPIO1_22                     IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR                   IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_COL                      IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2               IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3      IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49             IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK                IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23                  IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR                 IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4   IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50          IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER                   IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__GPIO1_24                    IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR                  IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK                  IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3              IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV                  IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25                   IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT                 IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1                  IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__GPIO1_26                     IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__ESAI1_FST                    IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG                   IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1               IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0                  IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__GPIO1_27                     IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT                   IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT               IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN                   IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__GPIO1_28                    IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2               IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1                  IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__GPIO1_29                     IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3                IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK                   IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK          IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0                  IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__GPIO1_30                     IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1                IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0            IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__FEC_MDC                       IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__GPIO1_31                      IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0                 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT                    IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG        IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1             IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__PATA_DIOW                   IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__GPIO6_17                    IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX               IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2           IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__PATA_DMACK                 IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__GPIO6_18                   IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX              IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3          IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ                 IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__GPIO7_0                    IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX              IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0              IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4          IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN         IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1                IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX          IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1          IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5      IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ                 IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__GPIO7_2                    IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__UART2_CTS                  IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN                 IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2              IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6          IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__PATA_DIOR                   IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__GPIO7_3                     IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__UART2_RTS                   IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN                  IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7           IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B        IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__GPIO7_4                  IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD               IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__UART1_CTS                IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN               IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0        IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__PATA_IORDY                 IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__GPIO7_5                    IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK                 IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__UART1_RTS                  IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN                 IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1          IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__PATA_DA_0                   IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__GPIO7_6                     IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST                  IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE                  IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2           IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__PATA_DA_1                   IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__GPIO7_7                     IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD                  IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__UART3_CTS                   IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3           IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__PATA_DA_2                   IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__GPIO7_8                     IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK                  IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__UART3_RTS                   IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4           IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__PATA_CS_0                   IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__GPIO7_9                     IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX               IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5           IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__PATA_CS_1                   IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__GPIO7_10                    IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX               IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6           IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0                IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPIO2_0                    IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0              IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4                IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0      IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0             IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7          IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1                IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPIO2_1                    IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1              IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5                IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1      IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1             IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2                IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPIO2_2                    IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2              IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6                IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2      IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2             IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3                IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPIO2_3                    IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3              IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7                IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3      IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3             IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4                IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPIO2_4                    IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4              IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4                IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4      IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4             IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5                IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPIO2_5                    IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5              IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5                IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5      IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5             IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6                IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPIO2_6                    IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6              IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6                IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6      IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6             IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7                IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPIO2_7                    IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7              IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7                IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7      IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7             IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8                IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPIO2_8                    IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4                IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8              IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0                IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8      IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8             IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9                IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPIO2_9                    IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5                IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9              IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1                IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9      IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9             IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10              IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPIO2_10                  IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6               IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10            IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2               IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10    IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10           IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11              IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPIO2_11                  IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7               IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11            IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3               IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11    IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11           IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12              IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPIO2_12                  IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4               IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12            IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0               IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12    IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12           IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13              IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPIO2_13                  IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5               IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13            IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1               IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13    IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13           IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14              IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPIO2_14                  IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6               IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14            IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2               IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14    IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14           IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15              IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPIO2_15                  IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7               IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15            IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3               IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15    IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15           IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0                 IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPIO1_16                    IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1                  IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CSPI_MISO                   IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP                IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1                 IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPIO1_17                    IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2                  IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CSPI_SS0                    IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP                IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD                    IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPIO1_18                      IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1                   IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CSPI_MOSI                     IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP                  IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2                 IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPIO1_19                    IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2                 IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO                   IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B                IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CSPI_SS1                    IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB        IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP                IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK                    IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPIO1_20                      IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT                IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPT_CLKIN                     IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__CSPI_SCLK                     IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0                IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3                 IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPIO1_21                    IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3                 IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO                   IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B                IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__CSPI_SS2                    IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB        IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1              IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK                    IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__GPIO1_10                      IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__KPP_COL_5                     IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS              IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__CSPI_SCLK                     IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V                  IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD                    IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__GPIO1_11                      IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__KPP_ROW_5                     IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC               IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__CSPI_MOSI                     IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__SCC_RANDOM                    IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3                 IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__GPIO1_12                    IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__KPP_COL_6                   IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC             IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__CSPI_SS2                    IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__SJC_DONE                    IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2                 IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__GPIO1_13                    IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6                   IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD             IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__CSPI_SS1                    IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__SJC_FAIL                    IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1                 IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__GPIO1_14                    IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__KPP_COL_7                   IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS            IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__CSPI_SS0                    IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO                IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0                 IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__GPIO1_15                    IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7                   IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD             IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__CSPI_MISO                   IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT               IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_CLKO                       IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__GPIO1_0                        IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__KPP_COL_5                      IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK               IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__EPIT1_EPITO                    IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB                 IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR               IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CSU_TD                         IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESAI1_SCKR                     IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__GPIO1_1                        IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__KPP_ROW_5                      IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK               IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__PWM2_PWMO                      IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B                   IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESDHC1_CD                      IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK                 IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESAI1_FSR                      IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__GPIO1_9                        IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__KPP_COL_6                      IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B                   IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__PWM1_PWMO                      IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B                   IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESDHC1_WP                      IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE                 IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__ESAI1_HCKR                     IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__GPIO1_3                        IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__I2C3_SCL                       IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN                 IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__CCM_CLKO2                      IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0     IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC                IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__MLB_MLBCLK                     IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESAI1_SCKT                     IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__GPIO1_6                        IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__I2C3_SDA                       IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0                  IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB                IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1     IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL                    IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__MLB_MLBSIG                     IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESAI1_FST                      IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__GPIO1_2                        IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__KPP_ROW_6                      IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1                  IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0            IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2     IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESDHC2_WP                      IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__MLB_MLBDAT                     IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESAI1_HCKT                     IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__GPIO1_4                        IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__KPP_COL_7                      IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2                  IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1            IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3     IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESDHC2_CD                      IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE                  IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3                  IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__GPIO1_5                        IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__KPP_ROW_7                      IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_CLKO                       IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2            IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4     IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__I2C3_SCL                       IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP                   IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1                  IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__GPIO1_7                        IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__EPIT1_EPITO                    IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CAN1_TXCAN                     IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX                  IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_7__FIRI_RXD                       IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK                    IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP                   IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0                  IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__GPIO1_8                        IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__EPIT2_EPITO                    IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN                     IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX                  IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_8__FIRI_TXD                       IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK                    IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP                   IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2                 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__GPIO7_11                      IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT              IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1          IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SPDIF_IN1                     IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__I2C3_SDA                      IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SJC_DE_B                      IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__ESAI1_TX0                     IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPIO7_12                      IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0              IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY                  IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG           IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SPDIF_OUT1                    IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__IPU_SNOOP2                    IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT                  IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESAI1_TX1                     IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__GPIO7_13                      IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1              IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__OWIRE_LINE                    IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG        IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK              IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL                   IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST                IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
-#endif  /* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 6132972aff37..5857b9cd6eb9 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
 int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
                                   const char *name, struct resource *res);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index b59edb065c70..2dddfc4c63af 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -365,6 +365,14 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
                goto odbfd_exit1;
        }
+        /* Fix up missing resource names */
+        for (i = 0; i < pdev->num_resources; i++) {
+                struct resource *r = &pdev->resource[i];
+                if (r->name == NULL)
+                        r->name = dev_name(&pdev->dev);
+        }
        if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
                omap_device_disable_idle_on_suspend(pdev);
@@ -481,6 +489,33 @@ static int omap_device_fill_resources(struct omap_device *od,
 }
 /**
+ * _od_fill_dma_resources - fill in array of struct resource with dma resources
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the dma resource data for this omap_device @od.  Used by
+ * omap_device_alloc() after calling omap_device_count_resources().
+ *
+ * Ideally this function would not be needed at all.  If we have
+ * mechanism to get dma resources from DT.
+ *
+ * Returns 0.
+ */
+static int _od_fill_dma_resources(struct omap_device *od,
+                                      struct resource *res)
+{
+        int i, r;
+        for (i = 0; i < od->hwmods_cnt; i++) {
+                r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
+                res += r;
+        }
+        return 0;
+}
+/**
 * omap_device_alloc - allocate an omap_device
 * @pdev: platform_device that will be included in this omap_device
 * @oh: ptr to the single omap_hwmod that backs this omap_device
@@ -519,24 +554,44 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
        od->hwmods = hwmods;
        od->pdev = pdev;
+        res_count = omap_device_count_resources(od);
        /*
-         * HACK: Ideally the resources from DT should match, and hwmod
+         * DT Boot:
-         * should just add the missing ones. Since the name is not
+         *   OF framework will construct the resource structure (currently
-         * properly populated by DT, stick to hwmod resources only.
+         *   does for MEM & IRQ resource) and we should respect/use these
+         *   resources, killing hwmod dependency.
+         *   If pdev->num_resources > 0, we assume that MEM & IRQ resources
+         *   have been allocated by OF layer already (through DTB).
+         *
+         * Non-DT Boot:
+         *   Here, pdev->num_resources = 0, and we should get all the
+         *   resources from hwmod.
+         *
+         * TODO: Once DMA resource is available from OF layer, we should
+         *   kill filling any resources from hwmod.
         */
-        if (pdev->num_resources && pdev->resource)
+        if (res_count > pdev->num_resources) {
-                dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+                /* Allocate resources memory to account for new resources */
-                        __func__, pdev->num_resources);
-        res_count = omap_device_count_resources(od);
-        if (res_count > 0) {
-                dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
-                        __func__, res_count);
                res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
                if (!res)
                        goto oda_exit3;
-                omap_device_fill_resources(od, res);
+                /*
+                 * If pdev->num_resources > 0, then assume that,
+                 * MEM and IRQ resources will only come from DT and only
+                 * fill DMA resource from hwmod layer.
+                 */
+                if (pdev->num_resources && pdev->resource) {
+                        dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
+                                __func__, res_count);
+                        memcpy(res, pdev->resource,
+                               sizeof(struct resource) * pdev->num_resources);
+                        _od_fill_dma_resources(od, &res[pdev->num_resources]);
+                } else {
+                        dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
+                                __func__, res_count);
+                        omap_device_fill_resources(od, res);
+                }
                ret = platform_device_add_resources(pdev, res, res_count);
                kfree(res);
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 7f0b5ca78516..bace9e98f75d 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -40,4 +40,17 @@ config COMMON_CLK_WM831X
          Supports the clocking subsystem of the WM831x/2x series of
          PMICs from Wolfson Microlectronics.
+config COMMON_CLK_VERSATILE
+        bool "Clock driver for ARM Reference designs"
+        depends on ARCH_INTEGRATOR || ARCH_REALVIEW
+        ---help---
+          Supports clocking on ARM Reference designs Integrator/AP,
+          Integrator/CP, RealView PB1176, EB, PB11MP and PBX.
+config COMMON_CLK_MAX77686
+        tristate "Clock driver for Maxim 77686 MFD"
+        depends on MFD_MAX77686
+        ---help---
+          This driver supports Maxim 77686 crystal oscillator clock. 
 endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d4c7253eb307..6327536b4900 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -9,8 +9,14 @@ obj-$(CONFIG_ARCH_MXS)		+= mxs/
 obj-$(CONFIG_ARCH_SOCFPGA)      += socfpga/
 obj-$(CONFIG_PLAT_SPEAR)        += spear/
 obj-$(CONFIG_ARCH_U300)         += clk-u300.o
-obj-$(CONFIG_ARCH_INTEGRATOR)   += versatile/
+obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
 obj-$(CONFIG_ARCH_PRIMA2)       += clk-prima2.o
+ifeq ($(CONFIG_COMMON_CLK), y)
+obj-$(CONFIG_ARCH_MMP)          += mmp/
+endif
+obj-$(CONFIG_MACH_LOONGSON1)    += clk-ls1x.o
+obj-$(CONFIG_ARCH_U8500)        += ux500/
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
+obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c
new file mode 100644
index 000000000000..f20b750235f6
--- /dev/null
+++ b/drivers/clk/clk-ls1x.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <loongson1.h>
+#define OSC     33
+static DEFINE_SPINLOCK(_lock);
+static int ls1x_pll_clk_enable(struct clk_hw *hw)
+{
+        return 0;
+}
+static void ls1x_pll_clk_disable(struct clk_hw *hw)
+{
+}
+static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
+                                             unsigned long parent_rate)
+{
+        u32 pll, rate;
+        pll = __raw_readl(LS1X_CLK_PLL_FREQ);
+        rate = ((12 + (pll & 0x3f)) * 1000000) +
+                ((((pll >> 8) & 0x3ff) * 1000000) >> 10);
+        rate *= OSC;
+        rate >>= 1;
+        return rate;
+}
+static const struct clk_ops ls1x_pll_clk_ops = {
+        .enable = ls1x_pll_clk_enable,
+        .disable = ls1x_pll_clk_disable,
+        .recalc_rate = ls1x_pll_recalc_rate,
+};
+static struct clk * __init clk_register_pll(struct device *dev,
+         const char *name, const char *parent_name, unsigned long flags)
+{
+        struct clk_hw *hw;
+        struct clk *clk;
+        struct clk_init_data init;
+        /* allocate the divider */
+        hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL);
+        if (!hw) {
+                pr_err("%s: could not allocate clk_hw\n", __func__);
+                return ERR_PTR(-ENOMEM);
+        }
+        init.name = name;
+        init.ops = &ls1x_pll_clk_ops;
+        init.flags = flags | CLK_IS_BASIC;
+        init.parent_names = (parent_name ? &parent_name : NULL);
+        init.num_parents = (parent_name ? 1 : 0);
+        hw->init = &init;
+        /* register the clock */
+        clk = clk_register(dev, hw);
+        if (IS_ERR(clk))
+                kfree(hw);
+        return clk;
+}
+void __init ls1x_clk_init(void)
+{
+        struct clk *clk;
+        clk = clk_register_pll(NULL, "pll_clk", NULL, CLK_IS_ROOT);
+        clk_prepare_enable(clk);
+        clk = clk_register_divider(NULL, "cpu_clk", "pll_clk",
+                        CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_CPU_SHIFT,
+                        DIV_CPU_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+        clk_prepare_enable(clk);
+        clk_register_clkdev(clk, "cpu", NULL);
+        clk = clk_register_divider(NULL, "dc_clk", "pll_clk",
+                        CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
+                        DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+        clk_prepare_enable(clk);
+        clk_register_clkdev(clk, "dc", NULL);
+        clk = clk_register_divider(NULL, "ahb_clk", "pll_clk",
+                        CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
+                        DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
+        clk_prepare_enable(clk);
+        clk_register_clkdev(clk, "ahb", NULL);
+        clk_register_clkdev(clk, "stmmaceth", NULL);
+        clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1, 2);
+        clk_prepare_enable(clk);
+        clk_register_clkdev(clk, "apb", NULL);
+        clk_register_clkdev(clk, "serial8250", NULL);
+}
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
new file mode 100644
index 000000000000..ac5f5434cb9a
--- /dev/null
+++ b/drivers/clk/clk-max77686.c
@@ -0,0 +1,244 @@
+/*
+ * clk-max77686.c - Clock driver for Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electornics
+ * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+#include <linux/clk-provider.h>
+#include <linux/mutex.h>
+#include <linux/clkdev.h>
+enum {
+        MAX77686_CLK_AP = 0,
+        MAX77686_CLK_CP,
+        MAX77686_CLK_PMIC,
+        MAX77686_CLKS_NUM,
+};
+struct max77686_clk {
+        struct max77686_dev *iodev;
+        u32 mask;
+        struct clk_hw hw;
+        struct clk_lookup *lookup;
+};
+static struct max77686_clk *get_max77686_clk(struct clk_hw *hw)
+{
+        return container_of(hw, struct max77686_clk, hw);
+}
+static int max77686_clk_prepare(struct clk_hw *hw)
+{
+        struct max77686_clk *max77686;
+        int ret;
+        max77686 = get_max77686_clk(hw);
+        if (!max77686)
+                return -ENOMEM;
+        ret = regmap_update_bits(max77686->iodev->regmap,
+                MAX77686_REG_32KHZ, max77686->mask, max77686->mask);
+        return ret;
+}
+static void max77686_clk_unprepare(struct clk_hw *hw)
+{
+        struct max77686_clk *max77686;
+        max77686 = get_max77686_clk(hw);
+        if (!max77686)
+                return;
+        regmap_update_bits(max77686->iodev->regmap,
+                MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
+}
+static int max77686_clk_is_enabled(struct clk_hw *hw)
+{
+        struct max77686_clk *max77686;
+        int ret;
+        u32 val;
+        max77686 = get_max77686_clk(hw);
+        if (!max77686)
+                return -ENOMEM;
+        ret = regmap_read(max77686->iodev->regmap,
+                                MAX77686_REG_32KHZ, &val);
+        if (ret < 0)
+                return -EINVAL;
+        return val & max77686->mask;
+}
+static struct clk_ops max77686_clk_ops = {
+        .prepare        = max77686_clk_prepare,
+        .unprepare      = max77686_clk_unprepare,
+        .is_enabled     = max77686_clk_is_enabled,
+};
+static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
+        [MAX77686_CLK_AP] = {
+                .name = "32khz_ap",
+                .ops = &max77686_clk_ops,
+                .flags = CLK_IS_ROOT,
+        },
+        [MAX77686_CLK_CP] = {
+                .name = "32khz_cp",
+                .ops = &max77686_clk_ops,
+                .flags = CLK_IS_ROOT,
+        },
+        [MAX77686_CLK_PMIC] = {
+                .name = "32khz_pmic",
+                .ops = &max77686_clk_ops,
+                .flags = CLK_IS_ROOT,
+        },
+};
+static int max77686_clk_register(struct device *dev,
+                                struct max77686_clk *max77686)
+{
+        struct clk *clk;
+        struct clk_hw *hw = &max77686->hw;
+        clk = clk_register(dev, hw);
+        if (IS_ERR(clk))
+                return -ENOMEM;
+        max77686->lookup = devm_kzalloc(dev, sizeof(struct clk_lookup),
+                                        GFP_KERNEL);
+        if (IS_ERR(max77686->lookup))
+                return -ENOMEM;
+        max77686->lookup->con_id = hw->init->name;
+        max77686->lookup->clk = clk;
+        clkdev_add(max77686->lookup);
+        return 0;
+}
+static __devinit int max77686_clk_probe(struct platform_device *pdev)
+{
+        struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+        struct max77686_clk **max77686_clks;
+        int i, ret;
+        max77686_clks = devm_kzalloc(&pdev->dev, sizeof(struct max77686_clk *)
+                                        * MAX77686_CLKS_NUM, GFP_KERNEL);
+        if (IS_ERR(max77686_clks))
+                return -ENOMEM;
+        for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+                max77686_clks[i] = devm_kzalloc(&pdev->dev,
+                                        sizeof(struct max77686_clk), GFP_KERNEL);
+                if (IS_ERR(max77686_clks[i]))
+                        return -ENOMEM;
+        }
+        for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+                max77686_clks[i]->iodev = iodev;
+                max77686_clks[i]->mask = 1 << i;
+                max77686_clks[i]->hw.init = &max77686_clks_init[i];
+                ret = max77686_clk_register(&pdev->dev, max77686_clks[i]);
+                if (ret) {
+                        switch (i) {
+                        case MAX77686_CLK_AP:
+                                dev_err(&pdev->dev, "Fail to register CLK_AP\n");
+                                goto err_clk_ap;
+                                break;
+                        case MAX77686_CLK_CP:
+                                dev_err(&pdev->dev, "Fail to register CLK_CP\n");
+                                goto err_clk_cp;
+                                break;
+                        case MAX77686_CLK_PMIC:
+                                dev_err(&pdev->dev, "Fail to register CLK_PMIC\n");
+                                goto err_clk_pmic;
+                        }
+                }
+        }
+        platform_set_drvdata(pdev, max77686_clks);
+        goto out;
+err_clk_pmic:
+        clkdev_drop(max77686_clks[MAX77686_CLK_CP]->lookup);
+        kfree(max77686_clks[MAX77686_CLK_CP]->hw.clk);
+err_clk_cp:
+        clkdev_drop(max77686_clks[MAX77686_CLK_AP]->lookup);
+        kfree(max77686_clks[MAX77686_CLK_AP]->hw.clk);
+err_clk_ap:
+out:
+        return ret;
+}
+static int __devexit max77686_clk_remove(struct platform_device *pdev)
+{
+        struct max77686_clk **max77686_clks = platform_get_drvdata(pdev);
+        int i;
+        for (i = 0; i < MAX77686_CLKS_NUM; i++) {
+                clkdev_drop(max77686_clks[i]->lookup);
+                kfree(max77686_clks[i]->hw.clk);
+        }
+        return 0;
+}
+static const struct platform_device_id max77686_clk_id[] = {
+        { "max77686-clk", 0},
+        { },
+};
+MODULE_DEVICE_TABLE(platform, max77686_clk_id);
+static struct platform_driver max77686_clk_driver = {
+        .driver = {
+                .name  = "max77686-clk",
+                .owner = THIS_MODULE,
+        },
+        .probe = max77686_clk_probe,
+        .remove = __devexit_p(max77686_clk_remove),
+        .id_table = max77686_clk_id,
+};
+static int __init max77686_clk_init(void)
+{
+        return platform_driver_register(&max77686_clk_driver);
+}
+subsys_initcall(max77686_clk_init);
+static void __init max77686_clk_cleanup(void)
+{
+        platform_driver_unregister(&max77686_clk_driver);
+}
+module_exit(max77686_clk_cleanup);
+MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
+MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index efdfd009c270..56e4495ebeb1 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -558,25 +558,6 @@ int clk_enable(struct clk *clk)
 EXPORT_SYMBOL_GPL(clk_enable);
 /**
- * clk_get_rate - return the rate of clk
- * @clk: the clk whose rate is being returned
- *
- * Simply returns the cached rate of the clk.  Does not query the hardware.  If
- * clk is NULL then returns 0.
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-        unsigned long rate;
-        mutex_lock(&prepare_lock);
-        rate = __clk_get_rate(clk);
-        mutex_unlock(&prepare_lock);
-        return rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-/**
 * __clk_round_rate - round the given rate for a clk
 * @clk: round the rate of this clock
 *
@@ -702,6 +683,30 @@ static void __clk_recalc_rates(struct clk *clk, unsigned long msg)
 }
 /**
+ * clk_get_rate - return the rate of clk
+ * @clk: the clk whose rate is being returned
+ *
+ * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag
+ * is set, which means a recalc_rate will be issued.
+ * If clk is NULL then returns 0.
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+        unsigned long rate;
+        mutex_lock(&prepare_lock);
+        if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
+                __clk_recalc_rates(clk, 0);
+        rate = __clk_get_rate(clk);
+        mutex_unlock(&prepare_lock);
+        return rate;
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+/**
 * __clk_speculate_rates
 * @clk: first clk in the subtree
 * @parent_rate: the "future" rate of clk's parent
@@ -1582,6 +1587,20 @@ struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
 }
 EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data)
+{
+        struct clk_onecell_data *clk_data = data;
+        unsigned int idx = clkspec->args[0];
+        if (idx >= clk_data->clk_num) {
+                pr_err("%s: invalid clock index %d\n", __func__, idx);
+                return ERR_PTR(-EINVAL);
+        }
+        return clk_data->clks[idx];
+}
+EXPORT_SYMBOL_GPL(of_clk_src_onecell_get);
 /**
 * of_clk_add_provider() - Register a clock provider for a node
 * @np: Device node pointer associated with clock provider
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
new file mode 100644
index 000000000000..392d78044ce3
--- /dev/null
+++ b/drivers/clk/mmp/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for mmp specific clk
+#
+obj-y += clk-apbc.o clk-apmu.o clk-frac.o
+obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
+obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
+obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
diff --git a/drivers/clk/mmp/clk-apbc.c b/drivers/clk/mmp/clk-apbc.c
new file mode 100644
index 000000000000..d14120eaa71f
--- /dev/null
+++ b/drivers/clk/mmp/clk-apbc.c
@@ -0,0 +1,152 @@
+/*
+ * mmp APB clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include "clk.h"
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK     (1 << 0)  /* APB Bus Clock Enable */
+#define APBC_FNCLK      (1 << 1)  /* Functional Clock Enable */
+#define APBC_RST        (1 << 2)  /* Reset Generation */
+#define APBC_POWER      (1 << 7)  /* Reset Generation */
+#define to_clk_apbc(hw) container_of(hw, struct clk_apbc, hw)
+struct clk_apbc {
+        struct clk_hw           hw;
+        void __iomem            *base;
+        unsigned int            delay;
+        unsigned int            flags;
+        spinlock_t              *lock;
+};
+static int clk_apbc_prepare(struct clk_hw *hw)
+{
+        struct clk_apbc *apbc = to_clk_apbc(hw);
+        unsigned int data;
+        unsigned long flags = 0;
+        /*
+         * It may share same register as MUX clock,
+         * and it will impact FNCLK enable. Spinlock is needed
+         */
+        if (apbc->lock)
+                spin_lock_irqsave(apbc->lock, flags);
+        data = readl_relaxed(apbc->base);
+        if (apbc->flags & APBC_POWER_CTRL)
+                data |= APBC_POWER;
+        data |= APBC_FNCLK;
+        writel_relaxed(data, apbc->base);
+        if (apbc->lock)
+                spin_unlock_irqrestore(apbc->lock, flags);
+        udelay(apbc->delay);
+        if (apbc->lock)
+                spin_lock_irqsave(apbc->lock, flags);
+        data = readl_relaxed(apbc->base);
+        data |= APBC_APBCLK;
+        writel_relaxed(data, apbc->base);
+        if (apbc->lock)
+                spin_unlock_irqrestore(apbc->lock, flags);
+        udelay(apbc->delay);
+        if (!(apbc->flags & APBC_NO_BUS_CTRL)) {
+                if (apbc->lock)
+                        spin_lock_irqsave(apbc->lock, flags);
+                data = readl_relaxed(apbc->base);
+                data &= ~APBC_RST;
+                writel_relaxed(data, apbc->base);
+                if (apbc->lock)
+                        spin_unlock_irqrestore(apbc->lock, flags);
+        }
+        return 0;
+}
+static void clk_apbc_unprepare(struct clk_hw *hw)
+{
+        struct clk_apbc *apbc = to_clk_apbc(hw);
+        unsigned long data;
+        unsigned long flags = 0;
+        if (apbc->lock)
+                spin_lock_irqsave(apbc->lock, flags);
+        data = readl_relaxed(apbc->base);
+        if (apbc->flags & APBC_POWER_CTRL)
+                data &= ~APBC_POWER;
+        data &= ~APBC_FNCLK;
+        writel_relaxed(data, apbc->base);
+        if (apbc->lock)
+                spin_unlock_irqrestore(apbc->lock, flags);
+        udelay(10);
+        if (apbc->lock)
+                spin_lock_irqsave(apbc->lock, flags);
+        data = readl_relaxed(apbc->base);
+        data &= ~APBC_APBCLK;
+        writel_relaxed(data, apbc->base);
+        if (apbc->lock)
+                spin_unlock_irqrestore(apbc->lock, flags);
+}
+struct clk_ops clk_apbc_ops = {
+        .prepare = clk_apbc_prepare,
+        .unprepare = clk_apbc_unprepare,
+};
+struct clk *mmp_clk_register_apbc(const char *name, const char *parent_name,
+                void __iomem *base, unsigned int delay,
+                unsigned int apbc_flags, spinlock_t *lock)
+{
+        struct clk_apbc *apbc;
+        struct clk *clk;
+        struct clk_init_data init;
+        apbc = kzalloc(sizeof(*apbc), GFP_KERNEL);
+        if (!apbc)
+                return NULL;
+        init.name = name;
+        init.ops = &clk_apbc_ops;
+        init.flags = CLK_SET_RATE_PARENT;
+        init.parent_names = (parent_name ? &parent_name : NULL);
+        init.num_parents = (parent_name ? 1 : 0);
+        apbc->base = base;
+        apbc->delay = delay;
+        apbc->flags = apbc_flags;
+        apbc->lock = lock;
+        apbc->hw.init = &init;
+        clk = clk_register(NULL, &apbc->hw);
+        if (IS_ERR(clk))
+                kfree(apbc);
+        return clk;
+}
diff --git a/drivers/clk/mmp/clk-apmu.c b/drivers/clk/mmp/clk-apmu.c
new file mode 100644
index 000000000000..abe182b2377f
--- /dev/null
+++ b/drivers/clk/mmp/clk-apmu.c
@@ -0,0 +1,97 @@
+/*
+ * mmp AXI peripharal clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include "clk.h"
+#define to_clk_apmu(clk) (container_of(clk, struct clk_apmu, clk))
+struct clk_apmu {
+        struct clk_hw   hw;
+        void __iomem    *base;
+        u32             rst_mask;
+        u32             enable_mask;
+        spinlock_t      *lock;
+};
+static int clk_apmu_enable(struct clk_hw *hw)
+{
+        struct clk_apmu *apmu = to_clk_apmu(hw);
+        unsigned long data;
+        unsigned long flags = 0;
+        if (apmu->lock)
+                spin_lock_irqsave(apmu->lock, flags);
+        data = readl_relaxed(apmu->base) | apmu->enable_mask;
+        writel_relaxed(data, apmu->base);
+        if (apmu->lock)
+                spin_unlock_irqrestore(apmu->lock, flags);
+        return 0;
+}
+static void clk_apmu_disable(struct clk_hw *hw)
+{
+        struct clk_apmu *apmu = to_clk_apmu(hw);
+        unsigned long data;
+        unsigned long flags = 0;
+        if (apmu->lock)
+                spin_lock_irqsave(apmu->lock, flags);
+        data = readl_relaxed(apmu->base) & ~apmu->enable_mask;
+        writel_relaxed(data, apmu->base);
+        if (apmu->lock)
+                spin_unlock_irqrestore(apmu->lock, flags);
+}
+struct clk_ops clk_apmu_ops = {
+        .enable = clk_apmu_enable,
+        .disable = clk_apmu_disable,
+};
+struct clk *mmp_clk_register_apmu(const char *name, const char *parent_name,
+                void __iomem *base, u32 enable_mask, spinlock_t *lock)
+{
+        struct clk_apmu *apmu;
+        struct clk *clk;
+        struct clk_init_data init;
+        apmu = kzalloc(sizeof(*apmu), GFP_KERNEL);
+        if (!apmu)
+                return NULL;
+        init.name = name;
+        init.ops = &clk_apmu_ops;
+        init.flags = CLK_SET_RATE_PARENT;
+        init.parent_names = (parent_name ? &parent_name : NULL);
+        init.num_parents = (parent_name ? 1 : 0);
+        apmu->base = base;
+        apmu->enable_mask = enable_mask;
+        apmu->lock = lock;
+        apmu->hw.init = &init;
+        clk = clk_register(NULL, &apmu->hw);
+        if (IS_ERR(clk))
+                kfree(apmu);
+        return clk;
+}
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
new file mode 100644
index 000000000000..80c1dd15d15c
--- /dev/null
+++ b/drivers/clk/mmp/clk-frac.c
@@ -0,0 +1,153 @@
+/*
+ * mmp factor clock operation source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+/*
+ * It is M/N clock
+ *
+ * Fout from synthesizer can be given from two equations:
+ * numerator/denominator = Fin / (Fout * factor)
+ */
+#define to_clk_factor(hw) container_of(hw, struct clk_factor, hw)
+struct clk_factor {
+        struct clk_hw           hw;
+        void __iomem            *base;
+        struct clk_factor_masks *masks;
+        struct clk_factor_tbl   *ftbl;
+        unsigned int            ftbl_cnt;
+};
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
+                unsigned long *prate)
+{
+        struct clk_factor *factor = to_clk_factor(hw);
+        unsigned long rate = 0, prev_rate;
+        int i;
+        for (i = 0; i < factor->ftbl_cnt; i++) {
+                prev_rate = rate;
+                rate = (((*prate / 10000) * factor->ftbl[i].num) /
+                        (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+                if (rate > drate)
+                        break;
+        }
+        if (i == 0)
+                return rate;
+        else
+                return prev_rate;
+}
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+                unsigned long parent_rate)
+{
+        struct clk_factor *factor = to_clk_factor(hw);
+        struct clk_factor_masks *masks = factor->masks;
+        unsigned int val, num, den;
+        val = readl_relaxed(factor->base);
+        /* calculate numerator */
+        num = (val >> masks->num_shift) & masks->num_mask;
+        /* calculate denominator */
+        den = (val >> masks->den_shift) & masks->num_mask;
+        if (!den)
+                return 0;
+        return (((parent_rate / 10000)  * den) /
+                        (num * factor->masks->factor)) * 10000;
+}
+/* Configures new clock rate*/
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
+                                unsigned long prate)
+{
+        struct clk_factor *factor = to_clk_factor(hw);
+        struct clk_factor_masks *masks = factor->masks;
+        int i;
+        unsigned long val;
+        unsigned long prev_rate, rate = 0;
+        for (i = 0; i < factor->ftbl_cnt; i++) {
+                prev_rate = rate;
+                rate = (((prate / 10000) * factor->ftbl[i].num) /
+                        (factor->ftbl[i].den * factor->masks->factor)) * 10000;
+                if (rate > drate)
+                        break;
+        }
+        if (i > 0)
+                i--;
+        val = readl_relaxed(factor->base);
+        val &= ~(masks->num_mask << masks->num_shift);
+        val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+        val &= ~(masks->den_mask << masks->den_shift);
+        val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+        writel_relaxed(val, factor->base);
+        return 0;
+}
+static struct clk_ops clk_factor_ops = {
+        .recalc_rate = clk_factor_recalc_rate,
+        .round_rate = clk_factor_round_rate,
+        .set_rate = clk_factor_set_rate,
+};
+struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
+                unsigned long flags, void __iomem *base,
+                struct clk_factor_masks *masks, struct clk_factor_tbl *ftbl,
+                unsigned int ftbl_cnt)
+{
+        struct clk_factor *factor;
+        struct clk_init_data init;
+        struct clk *clk;
+        if (!masks) {
+                pr_err("%s: must pass a clk_factor_mask\n", __func__);
+                return ERR_PTR(-EINVAL);
+        }
+        factor = kzalloc(sizeof(*factor), GFP_KERNEL);
+        if (!factor) {
+                pr_err("%s: could not allocate factor  clk\n", __func__);
+                return ERR_PTR(-ENOMEM);
+        }
+        /* struct clk_aux assignments */
+        factor->base = base;
+        factor->masks = masks;
+        factor->ftbl = ftbl;
+        factor->ftbl_cnt = ftbl_cnt;
+        factor->hw.init = &init;
+        init.name = name;
+        init.ops = &clk_factor_ops;
+        init.flags = flags;
+        init.parent_names = &parent_name;
+        init.num_parents = 1;
+        clk = clk_register(NULL, &factor->hw);
+        if (IS_ERR_OR_NULL(clk))
+                kfree(factor);
+        return clk;
+}
diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
new file mode 100644
index 000000000000..ade435820c7e
--- /dev/null
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -0,0 +1,449 @@
+/*
+ * mmp2 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <mach/addr-map.h>
+#include "clk.h"
+#define APBC_RTC        0x0
+#define APBC_TWSI0      0x4
+#define APBC_TWSI1      0x8
+#define APBC_TWSI2      0xc
+#define APBC_TWSI3      0x10
+#define APBC_TWSI4      0x7c
+#define APBC_TWSI5      0x80
+#define APBC_KPC        0x18
+#define APBC_UART0      0x2c
+#define APBC_UART1      0x30
+#define APBC_UART2      0x34
+#define APBC_UART3      0x88
+#define APBC_GPIO       0x38
+#define APBC_PWM0       0x3c
+#define APBC_PWM1       0x40
+#define APBC_PWM2       0x44
+#define APBC_PWM3       0x48
+#define APBC_SSP0       0x50
+#define APBC_SSP1       0x54
+#define APBC_SSP2       0x58
+#define APBC_SSP3       0x5c
+#define APMU_SDH0       0x54
+#define APMU_SDH1       0x58
+#define APMU_SDH2       0xe8
+#define APMU_SDH3       0xec
+#define APMU_USB        0x5c
+#define APMU_DISP0      0x4c
+#define APMU_DISP1      0x110
+#define APMU_CCIC0      0x50
+#define APMU_CCIC1      0xf4
+#define MPMU_UART_PLL   0x14
+static DEFINE_SPINLOCK(clk_lock);
+static struct clk_factor_masks uart_factor_masks = {
+        .factor = 2,
+        .num_mask = 0x1fff,
+        .den_mask = 0x1fff,
+        .num_shift = 16,
+        .den_shift = 0,
+};
+static struct clk_factor_tbl uart_factor_tbl[] = {
+        {.num = 14634, .den = 2165},    /*14.745MHZ */
+        {.num = 3521, .den = 689},      /*19.23MHZ */
+        {.num = 9679, .den = 5728},     /*58.9824MHZ */
+        {.num = 15850, .den = 9451},    /*59.429MHZ */
+};
+static const char *uart_parent[] = {"uart_pll", "vctcxo"};
+static const char *ssp_parent[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+static const char *sdh_parent[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static const char *disp_parent[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_16", "vctcxo"};
+void __init mmp2_clk_init(void)
+{
+        struct clk *clk;
+        struct clk *vctcxo;
+        void __iomem *mpmu_base;
+        void __iomem *apmu_base;
+        void __iomem *apbc_base;
+        mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+        if (mpmu_base == NULL) {
+                pr_err("error to ioremap MPMU base\n");
+                return;
+        }
+        apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+        if (apmu_base == NULL) {
+                pr_err("error to ioremap APMU base\n");
+                return;
+        }
+        apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+        if (apbc_base == NULL) {
+                pr_err("error to ioremap APBC base\n");
+                return;
+        }
+        clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+        clk_register_clkdev(clk, "clk32", NULL);
+        vctcxo = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+                                26000000);
+        clk_register_clkdev(vctcxo, "vctcxo", NULL);
+        clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+                                800000000);
+        clk_register_clkdev(clk, "pll1", NULL);
+        clk = clk_register_fixed_rate(NULL, "usb_pll", NULL, CLK_IS_ROOT,
+                                480000000);
+        clk_register_clkdev(clk, "usb_pll", NULL);
+        clk = clk_register_fixed_rate(NULL, "pll2", NULL, CLK_IS_ROOT,
+                                960000000);
+        clk_register_clkdev(clk, "pll2", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_2", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_4", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_8", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_16", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_20", "pll1_4",
+                                CLK_SET_RATE_PARENT, 1, 5);
+        clk_register_clkdev(clk, "pll1_20", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_3", "pll1",
+                                CLK_SET_RATE_PARENT, 1, 3);
+        clk_register_clkdev(clk, "pll1_3", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_3",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_6", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_12", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll2_2", "pll2",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll2_2", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll2_4", "pll2_2",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll2_4", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll2_8", "pll2_4",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll2_8", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll2_16", "pll2_8",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll2_16", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll2_3", "pll2",
+                                CLK_SET_RATE_PARENT, 1, 3);
+        clk_register_clkdev(clk, "pll2_3", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll2_6", "pll2_3",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll2_6", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll2_12", "pll2_6",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll2_12", NULL);
+        clk = clk_register_fixed_factor(NULL, "vctcxo_2", "vctcxo",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "vctcxo_2", NULL);
+        clk = clk_register_fixed_factor(NULL, "vctcxo_4", "vctcxo_2",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "vctcxo_4", NULL);
+        clk = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+                                mpmu_base + MPMU_UART_PLL,
+                                &uart_factor_masks, uart_factor_tbl,
+                                ARRAY_SIZE(uart_factor_tbl));
+        clk_set_rate(clk, 14745600);
+        clk_register_clkdev(clk, "uart_pll", NULL);
+        clk = mmp_clk_register_apbc("twsi0", "vctcxo",
+                                apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+        clk = mmp_clk_register_apbc("twsi1", "vctcxo",
+                                apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+        clk = mmp_clk_register_apbc("twsi2", "vctcxo",
+                                apbc_base + APBC_TWSI2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.2");
+        clk = mmp_clk_register_apbc("twsi3", "vctcxo",
+                                apbc_base + APBC_TWSI3, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.3");
+        clk = mmp_clk_register_apbc("twsi4", "vctcxo",
+                                apbc_base + APBC_TWSI4, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.4");
+        clk = mmp_clk_register_apbc("twsi5", "vctcxo",
+                                apbc_base + APBC_TWSI5, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.5");
+        clk = mmp_clk_register_apbc("gpio", "vctcxo",
+                                apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa-gpio");
+        clk = mmp_clk_register_apbc("kpc", "clk32",
+                                apbc_base + APBC_KPC, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+        clk = mmp_clk_register_apbc("rtc", "clk32",
+                                apbc_base + APBC_RTC, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-rtc");
+        clk = mmp_clk_register_apbc("pwm0", "vctcxo",
+                                apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp2-pwm.0");
+        clk = mmp_clk_register_apbc("pwm1", "vctcxo",
+                                apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp2-pwm.1");
+        clk = mmp_clk_register_apbc("pwm2", "vctcxo",
+                                apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp2-pwm.2");
+        clk = mmp_clk_register_apbc("pwm3", "vctcxo",
+                                apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp2-pwm.3");
+        clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, vctcxo);
+        clk_register_clkdev(clk, "uart_mux.0", NULL);
+        clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+                                apbc_base + APBC_UART0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+        clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, vctcxo);
+        clk_register_clkdev(clk, "uart_mux.1", NULL);
+        clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+                                apbc_base + APBC_UART1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+        clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, vctcxo);
+        clk_register_clkdev(clk, "uart_mux.2", NULL);
+        clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+                                apbc_base + APBC_UART2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+        clk = clk_register_mux(NULL, "uart3_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART3, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, vctcxo);
+        clk_register_clkdev(clk, "uart_mux.3", NULL);
+        clk = mmp_clk_register_apbc("uart3", "uart3_mux",
+                                apbc_base + APBC_UART3, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.3");
+        clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "uart_mux.0", NULL);
+        clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+                                apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+        clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.1", NULL);
+        clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+                                apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+        clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.2", NULL);
+        clk = mmp_clk_register_apbc("ssp2", "ssp2_mux",
+                                apbc_base + APBC_SSP2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+        clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.3", NULL);
+        clk = mmp_clk_register_apbc("ssp3", "ssp3_mux",
+                                apbc_base + APBC_SSP3, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+        clk = clk_register_mux(NULL, "sdh_mux", sdh_parent,
+                                ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_SDH0, 8, 2, 0, &clk_lock);
+        clk_register_clkdev(clk, "sdh_mux", NULL);
+        clk = clk_register_divider(NULL, "sdh_div", "sdh_mux",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_SDH0,
+                                10, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+        clk_register_clkdev(clk, "sdh_div", NULL);
+        clk = mmp_clk_register_apmu("sdh0", "sdh_div", apmu_base + APMU_SDH0,
+                                0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxav3.0");
+        clk = mmp_clk_register_apmu("sdh1", "sdh_div", apmu_base + APMU_SDH1,
+                                0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxav3.1");
+        clk = mmp_clk_register_apmu("sdh2", "sdh_div", apmu_base + APMU_SDH2,
+                                0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxav3.2");
+        clk = mmp_clk_register_apmu("sdh3", "sdh_div", apmu_base + APMU_SDH3,
+                                0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxav3.3");
+        clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+                                0x9, &clk_lock);
+        clk_register_clkdev(clk, "usb_clk", NULL);
+        clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+                                ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_DISP0, 6, 2, 0, &clk_lock);
+        clk_register_clkdev(clk, "disp_mux.0", NULL);
+        clk = clk_register_divider(NULL, "disp0_div", "disp0_mux",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_DISP0,
+                                8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+        clk_register_clkdev(clk, "disp_div.0", NULL);
+        clk = mmp_clk_register_apmu("disp0", "disp0_div",
+                                apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-disp.0");
+        clk = clk_register_divider(NULL, "disp0_sphy_div", "disp0_mux", 0,
+                                apmu_base + APMU_DISP0, 15, 5, 0, &clk_lock);
+        clk_register_clkdev(clk, "disp_sphy_div.0", NULL);
+        clk = mmp_clk_register_apmu("disp0_sphy", "disp0_sphy_div",
+                                apmu_base + APMU_DISP0, 0x1024, &clk_lock);
+        clk_register_clkdev(clk, "disp_sphy.0", NULL);
+        clk = clk_register_mux(NULL, "disp1_mux", disp_parent,
+                                ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_DISP1, 6, 2, 0, &clk_lock);
+        clk_register_clkdev(clk, "disp_mux.1", NULL);
+        clk = clk_register_divider(NULL, "disp1_div", "disp1_mux",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_DISP1,
+                                8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+        clk_register_clkdev(clk, "disp_div.1", NULL);
+        clk = mmp_clk_register_apmu("disp1", "disp1_div",
+                                apmu_base + APMU_DISP1, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-disp.1");
+        clk = mmp_clk_register_apmu("ccic_arbiter", "vctcxo",
+                                apmu_base + APMU_CCIC0, 0x1800, &clk_lock);
+        clk_register_clkdev(clk, "ccic_arbiter", NULL);
+        clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+                                ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_CCIC0, 6, 2, 0, &clk_lock);
+        clk_register_clkdev(clk, "ccic_mux.0", NULL);
+        clk = clk_register_divider(NULL, "ccic0_div", "ccic0_mux",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+                                17, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+        clk_register_clkdev(clk, "ccic_div.0", NULL);
+        clk = mmp_clk_register_apmu("ccic0", "ccic0_div",
+                                apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+        clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_div",
+                                apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+        clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+        clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_div",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+                                10, 5, 0, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.0");
+        clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+                                apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+        clk = clk_register_mux(NULL, "ccic1_mux", ccic_parent,
+                                ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_CCIC1, 6, 2, 0, &clk_lock);
+        clk_register_clkdev(clk, "ccic_mux.1", NULL);
+        clk = clk_register_divider(NULL, "ccic1_div", "ccic1_mux",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+                                16, 4, CLK_DIVIDER_ONE_BASED, &clk_lock);
+        clk_register_clkdev(clk, "ccic_div.1", NULL);
+        clk = mmp_clk_register_apmu("ccic1", "ccic1_div",
+                                apmu_base + APMU_CCIC1, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, "fnclk", "mmp-ccic.1");
+        clk = mmp_clk_register_apmu("ccic1_phy", "ccic1_div",
+                                apmu_base + APMU_CCIC1, 0x24, &clk_lock);
+        clk_register_clkdev(clk, "phyclk", "mmp-ccic.1");
+        clk = clk_register_divider(NULL, "ccic1_sphy_div", "ccic1_div",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1,
+                                10, 5, 0, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.1");
+        clk = mmp_clk_register_apmu("ccic1_sphy", "ccic1_sphy_div",
+                                apmu_base + APMU_CCIC1, 0x300, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk", "mmp-ccic.1");
+}
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
new file mode 100644
index 000000000000..e8d036c12cbf
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -0,0 +1,346 @@
+/*
+ * pxa168 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <mach/addr-map.h>
+#include "clk.h"
+#define APBC_RTC        0x28
+#define APBC_TWSI0      0x2c
+#define APBC_KPC        0x30
+#define APBC_UART0      0x0
+#define APBC_UART1      0x4
+#define APBC_GPIO       0x8
+#define APBC_PWM0       0xc
+#define APBC_PWM1       0x10
+#define APBC_PWM2       0x14
+#define APBC_PWM3       0x18
+#define APBC_SSP0       0x81c
+#define APBC_SSP1       0x820
+#define APBC_SSP2       0x84c
+#define APBC_SSP3       0x858
+#define APBC_SSP4       0x85c
+#define APBC_TWSI1      0x6c
+#define APBC_UART2      0x70
+#define APMU_SDH0       0x54
+#define APMU_SDH1       0x58
+#define APMU_USB        0x5c
+#define APMU_DISP0      0x4c
+#define APMU_CCIC0      0x50
+#define APMU_DFC        0x60
+#define MPMU_UART_PLL   0x14
+static DEFINE_SPINLOCK(clk_lock);
+static struct clk_factor_masks uart_factor_masks = {
+        .factor = 2,
+        .num_mask = 0x1fff,
+        .den_mask = 0x1fff,
+        .num_shift = 16,
+        .den_shift = 0,
+};
+static struct clk_factor_tbl uart_factor_tbl[] = {
+        {.num = 8125, .den = 1536},     /*14.745MHZ */
+};
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+void __init pxa168_clk_init(void)
+{
+        struct clk *clk;
+        struct clk *uart_pll;
+        void __iomem *mpmu_base;
+        void __iomem *apmu_base;
+        void __iomem *apbc_base;
+        mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+        if (mpmu_base == NULL) {
+                pr_err("error to ioremap MPMU base\n");
+                return;
+        }
+        apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+        if (apmu_base == NULL) {
+                pr_err("error to ioremap APMU base\n");
+                return;
+        }
+        apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+        if (apbc_base == NULL) {
+                pr_err("error to ioremap APBC base\n");
+                return;
+        }
+        clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+        clk_register_clkdev(clk, "clk32", NULL);
+        clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+                                26000000);
+        clk_register_clkdev(clk, "vctcxo", NULL);
+        clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+                                624000000);
+        clk_register_clkdev(clk, "pll1", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_2", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_4", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_8", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_16", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+                                CLK_SET_RATE_PARENT, 1, 3);
+        clk_register_clkdev(clk, "pll1_6", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_12", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_24", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_48", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_96", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+                                CLK_SET_RATE_PARENT, 1, 13);
+        clk_register_clkdev(clk, "pll1_13", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+                                CLK_SET_RATE_PARENT, 2, 3);
+        clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+                                CLK_SET_RATE_PARENT, 2, 3);
+        clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+                                CLK_SET_RATE_PARENT, 3, 16);
+        clk_register_clkdev(clk, "pll1_3_16", NULL);
+        uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+                                mpmu_base + MPMU_UART_PLL,
+                                &uart_factor_masks, uart_factor_tbl,
+                                ARRAY_SIZE(uart_factor_tbl));
+        clk_set_rate(uart_pll, 14745600);
+        clk_register_clkdev(uart_pll, "uart_pll", NULL);
+        clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+                                apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+        clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+                                apbc_base + APBC_TWSI1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+        clk = mmp_clk_register_apbc("gpio", "vctcxo",
+                                apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa-gpio");
+        clk = mmp_clk_register_apbc("kpc", "clk32",
+                                apbc_base + APBC_KPC, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+        clk = mmp_clk_register_apbc("rtc", "clk32",
+                                apbc_base + APBC_RTC, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sa1100-rtc");
+        clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+                                apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa168-pwm.0");
+        clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+                                apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa168-pwm.1");
+        clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+                                apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa168-pwm.2");
+        clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+                                apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa168-pwm.3");
+        clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, uart_pll);
+        clk_register_clkdev(clk, "uart_mux.0", NULL);
+        clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+                                apbc_base + APBC_UART0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+        clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, uart_pll);
+        clk_register_clkdev(clk, "uart_mux.1", NULL);
+        clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+                                apbc_base + APBC_UART1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+        clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART2, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, uart_pll);
+        clk_register_clkdev(clk, "uart_mux.2", NULL);
+        clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+                                apbc_base + APBC_UART2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+        clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "uart_mux.0", NULL);
+        clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", apbc_base + APBC_SSP0,
+                                10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+        clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.1", NULL);
+        clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", apbc_base + APBC_SSP1,
+                                10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+        clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.2", NULL);
+        clk = mmp_clk_register_apbc("ssp2", "ssp1_mux", apbc_base + APBC_SSP2,
+                                10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.2");
+        clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.3", NULL);
+        clk = mmp_clk_register_apbc("ssp3", "ssp1_mux", apbc_base + APBC_SSP3,
+                                10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.3");
+        clk = clk_register_mux(NULL, "ssp4_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP4, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.4", NULL);
+        clk = mmp_clk_register_apbc("ssp4", "ssp1_mux", apbc_base + APBC_SSP4,
+                                10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.4");
+        clk = mmp_clk_register_apmu("dfc", "pll1_4", apmu_base + APMU_DFC,
+                                0x19b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+        clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+                                ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "sdh0_mux", NULL);
+        clk = mmp_clk_register_apmu("sdh0", "sdh_mux", apmu_base + APMU_SDH0,
+                                0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+        clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+                                ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "sdh1_mux", NULL);
+        clk = mmp_clk_register_apmu("sdh1", "sdh1_mux", apmu_base + APMU_SDH1,
+                                0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+        clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB,
+                                0x9, &clk_lock);
+        clk_register_clkdev(clk, "usb_clk", NULL);
+        clk = mmp_clk_register_apmu("sph", "usb_pll", apmu_base + APMU_USB,
+                                0x12, &clk_lock);
+        clk_register_clkdev(clk, "sph_clk", NULL);
+        clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+                                ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "disp_mux.0", NULL);
+        clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+                                apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, "fnclk", "mmp-disp.0");
+        clk = mmp_clk_register_apmu("disp0_hclk", "disp0_mux",
+                                apmu_base + APMU_DISP0, 0x24, &clk_lock);
+        clk_register_clkdev(clk, "hclk", "mmp-disp.0");
+        clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+                                ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "ccic_mux.0", NULL);
+        clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+                                apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+        clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+                                ARRAY_SIZE(ccic_phy_parent),
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+                                7, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+        clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+                                apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+        clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+        clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+                                10, 5, 0, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk_div", NULL);
+        clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+                                apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
new file mode 100644
index 000000000000..7048c31d6e7e
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -0,0 +1,320 @@
+/*
+ * pxa910 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <mach/addr-map.h>
+#include "clk.h"
+#define APBC_RTC        0x28
+#define APBC_TWSI0      0x2c
+#define APBC_KPC        0x18
+#define APBC_UART0      0x0
+#define APBC_UART1      0x4
+#define APBC_GPIO       0x8
+#define APBC_PWM0       0xc
+#define APBC_PWM1       0x10
+#define APBC_PWM2       0x14
+#define APBC_PWM3       0x18
+#define APBC_SSP0       0x1c
+#define APBC_SSP1       0x20
+#define APBC_SSP2       0x4c
+#define APBCP_TWSI1     0x28
+#define APBCP_UART2     0x1c
+#define APMU_SDH0       0x54
+#define APMU_SDH1       0x58
+#define APMU_USB        0x5c
+#define APMU_DISP0      0x4c
+#define APMU_CCIC0      0x50
+#define APMU_DFC        0x60
+#define MPMU_UART_PLL   0x14
+static DEFINE_SPINLOCK(clk_lock);
+static struct clk_factor_masks uart_factor_masks = {
+        .factor = 2,
+        .num_mask = 0x1fff,
+        .den_mask = 0x1fff,
+        .num_shift = 16,
+        .den_shift = 0,
+};
+static struct clk_factor_tbl uart_factor_tbl[] = {
+        {.num = 8125, .den = 1536},     /*14.745MHZ */
+};
+static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
+static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+static const char *sdh_parent[] = {"pll1_12", "pll1_13"};
+static const char *disp_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
+void __init pxa910_clk_init(void)
+{
+        struct clk *clk;
+        struct clk *uart_pll;
+        void __iomem *mpmu_base;
+        void __iomem *apmu_base;
+        void __iomem *apbcp_base;
+        void __iomem *apbc_base;
+        mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+        if (mpmu_base == NULL) {
+                pr_err("error to ioremap MPMU base\n");
+                return;
+        }
+        apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+        if (apmu_base == NULL) {
+                pr_err("error to ioremap APMU base\n");
+                return;
+        }
+        apbcp_base = ioremap(APB_PHYS_BASE + 0x3b000, SZ_4K);
+        if (apbcp_base == NULL) {
+                pr_err("error to ioremap APBC extension base\n");
+                return;
+        }
+        apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+        if (apbc_base == NULL) {
+                pr_err("error to ioremap APBC base\n");
+                return;
+        }
+        clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200);
+        clk_register_clkdev(clk, "clk32", NULL);
+        clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT,
+                                26000000);
+        clk_register_clkdev(clk, "vctcxo", NULL);
+        clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT,
+                                624000000);
+        clk_register_clkdev(clk, "pll1", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_2", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_4", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_8", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_16", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2",
+                                CLK_SET_RATE_PARENT, 1, 3);
+        clk_register_clkdev(clk, "pll1_6", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_12", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_24", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_48", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48",
+                                CLK_SET_RATE_PARENT, 1, 2);
+        clk_register_clkdev(clk, "pll1_96", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1",
+                                CLK_SET_RATE_PARENT, 1, 13);
+        clk_register_clkdev(clk, "pll1_13", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1",
+                                CLK_SET_RATE_PARENT, 2, 3);
+        clk_register_clkdev(clk, "pll1_13_1_5", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1",
+                                CLK_SET_RATE_PARENT, 2, 3);
+        clk_register_clkdev(clk, "pll1_2_1_5", NULL);
+        clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1",
+                                CLK_SET_RATE_PARENT, 3, 16);
+        clk_register_clkdev(clk, "pll1_3_16", NULL);
+        uart_pll =  mmp_clk_register_factor("uart_pll", "pll1_4", 0,
+                                mpmu_base + MPMU_UART_PLL,
+                                &uart_factor_masks, uart_factor_tbl,
+                                ARRAY_SIZE(uart_factor_tbl));
+        clk_set_rate(uart_pll, 14745600);
+        clk_register_clkdev(uart_pll, "uart_pll", NULL);
+        clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5",
+                                apbc_base + APBC_TWSI0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0");
+        clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5",
+                                apbcp_base + APBCP_TWSI1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1");
+        clk = mmp_clk_register_apbc("gpio", "vctcxo",
+                                apbc_base + APBC_GPIO, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa-gpio");
+        clk = mmp_clk_register_apbc("kpc", "clk32",
+                                apbc_base + APBC_KPC, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa27x-keypad");
+        clk = mmp_clk_register_apbc("rtc", "clk32",
+                                apbc_base + APBC_RTC, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sa1100-rtc");
+        clk = mmp_clk_register_apbc("pwm0", "pll1_48",
+                                apbc_base + APBC_PWM0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa910-pwm.0");
+        clk = mmp_clk_register_apbc("pwm1", "pll1_48",
+                                apbc_base + APBC_PWM1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa910-pwm.1");
+        clk = mmp_clk_register_apbc("pwm2", "pll1_48",
+                                apbc_base + APBC_PWM2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa910-pwm.2");
+        clk = mmp_clk_register_apbc("pwm3", "pll1_48",
+                                apbc_base + APBC_PWM3, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa910-pwm.3");
+        clk = clk_register_mux(NULL, "uart0_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART0, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, uart_pll);
+        clk_register_clkdev(clk, "uart_mux.0", NULL);
+        clk = mmp_clk_register_apbc("uart0", "uart0_mux",
+                                apbc_base + APBC_UART0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.0");
+        clk = clk_register_mux(NULL, "uart1_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_UART1, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, uart_pll);
+        clk_register_clkdev(clk, "uart_mux.1", NULL);
+        clk = mmp_clk_register_apbc("uart1", "uart1_mux",
+                                apbc_base + APBC_UART1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.1");
+        clk = clk_register_mux(NULL, "uart2_mux", uart_parent,
+                                ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT,
+                                apbcp_base + APBCP_UART2, 4, 3, 0, &clk_lock);
+        clk_set_parent(clk, uart_pll);
+        clk_register_clkdev(clk, "uart_mux.2", NULL);
+        clk = mmp_clk_register_apbc("uart2", "uart2_mux",
+                                apbcp_base + APBCP_UART2, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa2xx-uart.2");
+        clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "uart_mux.0", NULL);
+        clk = mmp_clk_register_apbc("ssp0", "ssp0_mux",
+                                apbc_base + APBC_SSP0, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.0");
+        clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent,
+                                ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT,
+                                apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock);
+        clk_register_clkdev(clk, "ssp_mux.1", NULL);
+        clk = mmp_clk_register_apbc("ssp1", "ssp1_mux",
+                                apbc_base + APBC_SSP1, 10, 0, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-ssp.1");
+        clk = mmp_clk_register_apmu("dfc", "pll1_4",
+                                apmu_base + APMU_DFC, 0x19b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "pxa3xx-nand.0");
+        clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent,
+                                ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "sdh0_mux", NULL);
+        clk = mmp_clk_register_apmu("sdh0", "sdh_mux",
+                                apmu_base + APMU_SDH0, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxa.0");
+        clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent,
+                                ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "sdh1_mux", NULL);
+        clk = mmp_clk_register_apmu("sdh1", "sdh1_mux",
+                                apmu_base + APMU_SDH1, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "sdhci-pxa.1");
+        clk = mmp_clk_register_apmu("usb", "usb_pll",
+                                apmu_base + APMU_USB, 0x9, &clk_lock);
+        clk_register_clkdev(clk, "usb_clk", NULL);
+        clk = mmp_clk_register_apmu("sph", "usb_pll",
+                                apmu_base + APMU_USB, 0x12, &clk_lock);
+        clk_register_clkdev(clk, "sph_clk", NULL);
+        clk = clk_register_mux(NULL, "disp0_mux", disp_parent,
+                                ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "disp_mux.0", NULL);
+        clk = mmp_clk_register_apmu("disp0", "disp0_mux",
+                                apmu_base + APMU_DISP0, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, NULL, "mmp-disp.0");
+        clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent,
+                                ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT,
+                                apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "ccic_mux.0", NULL);
+        clk = mmp_clk_register_apmu("ccic0", "ccic0_mux",
+                                apmu_base + APMU_CCIC0, 0x1b, &clk_lock);
+        clk_register_clkdev(clk, "fnclk", "mmp-ccic.0");
+        clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent,
+                                ARRAY_SIZE(ccic_phy_parent),
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+                                7, 1, 0, &clk_lock);
+        clk_register_clkdev(clk, "ccic_phy_mux.0", NULL);
+        clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux",
+                                apmu_base + APMU_CCIC0, 0x24, &clk_lock);
+        clk_register_clkdev(clk, "phyclk", "mmp-ccic.0");
+        clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux",
+                                CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0,
+                                10, 5, 0, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk_div", NULL);
+        clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div",
+                                apmu_base + APMU_CCIC0, 0x300, &clk_lock);
+        clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0");
+}
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
new file mode 100644
index 000000000000..ab86dd4a416a
--- /dev/null
+++ b/drivers/clk/mmp/clk.h
@@ -0,0 +1,35 @@
+#ifndef __MACH_MMP_CLK_H
+#define __MACH_MMP_CLK_H
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#define APBC_NO_BUS_CTRL        BIT(0)
+#define APBC_POWER_CTRL         BIT(1)
+struct clk_factor_masks {
+        unsigned int    factor;
+        unsigned int    num_mask;
+        unsigned int    den_mask;
+        unsigned int    num_shift;
+        unsigned int    den_shift;
+};
+struct clk_factor_tbl {
+        unsigned int num;
+        unsigned int den;
+};
+extern struct clk *mmp_clk_register_pll2(const char *name,
+                const char *parent_name, unsigned long flags);
+extern struct clk *mmp_clk_register_apbc(const char *name,
+                const char *parent_name, void __iomem *base,
+                unsigned int delay, unsigned int apbc_flags, spinlock_t *lock);
+extern struct clk *mmp_clk_register_apmu(const char *name,
+                const char *parent_name, void __iomem *base, u32 enable_mask,
+                spinlock_t *lock);
+extern struct clk *mmp_clk_register_factor(const char *name,
+                const char *parent_name, unsigned long flags,
+                void __iomem *base, struct clk_factor_masks *masks,
+                struct clk_factor_tbl *ftbl, unsigned int ftbl_cnt);
+#endif
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index 844043ad0fe4..9f6d15546cbe 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -14,6 +14,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <mach/common.h>
 #include <mach/mx23.h>
 #include "clk.h"
@@ -71,44 +72,6 @@ static void __init clk_misc_init(void)
        __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
 }
-static struct clk_lookup uart_lookups[] = {
-        { .dev_id = "duart", },
-        { .dev_id = "mxs-auart.0", },
-        { .dev_id = "mxs-auart.1", },
-        { .dev_id = "8006c000.serial", },
-        { .dev_id = "8006e000.serial", },
-        { .dev_id = "80070000.serial", },
-};
-static struct clk_lookup hbus_lookups[] = {
-        { .dev_id = "imx23-dma-apbh", },
-        { .dev_id = "80004000.dma-apbh", },
-};
-static struct clk_lookup xbus_lookups[] = {
-        { .dev_id = "duart", .con_id = "apb_pclk"},
-        { .dev_id = "80070000.serial", .con_id = "apb_pclk"},
-        { .dev_id = "imx23-dma-apbx", },
-        { .dev_id = "80024000.dma-apbx", },
-};
-static struct clk_lookup ssp_lookups[] = {
-        { .dev_id = "imx23-mmc.0", },
-        { .dev_id = "imx23-mmc.1", },
-        { .dev_id = "80010000.ssp", },
-        { .dev_id = "80034000.ssp", },
-};
-static struct clk_lookup lcdif_lookups[] = {
-        { .dev_id = "imx23-fb", },
-        { .dev_id = "80030000.lcdif", },
-};
-static struct clk_lookup gpmi_lookups[] = {
-        { .dev_id = "imx23-gpmi-nand", },
-        { .dev_id = "8000c000.gpmi-nand", },
-};
 static const char *sel_pll[]  __initconst = { "pll", "ref_xtal", };
 static const char *sel_cpu[]  __initconst = { "ref_cpu", "ref_xtal", };
 static const char *sel_pix[]  __initconst = { "ref_pix", "ref_xtal", };
@@ -127,6 +90,7 @@ enum imx23_clk {
 };
 static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
 static enum imx23_clk clks_init_on[] __initdata = {
        cpu, hbus, xbus, emi, uart,
@@ -134,6 +98,7 @@ static enum imx23_clk clks_init_on[] __initdata = {
 int __init mx23_clocks_init(void)
 {
+        struct device_node *np;
        int i;
        clk_misc_init();
@@ -188,14 +153,14 @@ int __init mx23_clocks_init(void)
                        return PTR_ERR(clks[i]);
                }
+        np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+        if (np) {
+                clk_data.clks = clks;
+                clk_data.clk_num = ARRAY_SIZE(clks);
+                of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+        }
        clk_register_clkdev(clks[clk32k], NULL, "timrot");
-        clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
-        clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
-        clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
-        clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
-        clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups));
-        clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
-        clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clks[clks_init_on[i]]);
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index e3aab67b3eb7..613e76f3758e 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -14,6 +14,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <mach/common.h>
 #include <mach/mx28.h>
 #include "clk.h"
@@ -120,90 +121,6 @@ static void __init clk_misc_init(void)
        writel_relaxed(val, FRAC0);
 }
-static struct clk_lookup uart_lookups[] = {
-        { .dev_id = "duart", },
-        { .dev_id = "mxs-auart.0", },
-        { .dev_id = "mxs-auart.1", },
-        { .dev_id = "mxs-auart.2", },
-        { .dev_id = "mxs-auart.3", },
-        { .dev_id = "mxs-auart.4", },
-        { .dev_id = "8006a000.serial", },
-        { .dev_id = "8006c000.serial", },
-        { .dev_id = "8006e000.serial", },
-        { .dev_id = "80070000.serial", },
-        { .dev_id = "80072000.serial", },
-        { .dev_id = "80074000.serial", },
-};
-static struct clk_lookup hbus_lookups[] = {
-        { .dev_id = "imx28-dma-apbh", },
-        { .dev_id = "80004000.dma-apbh", },
-};
-static struct clk_lookup xbus_lookups[] = {
-        { .dev_id = "duart", .con_id = "apb_pclk"},
-        { .dev_id = "80074000.serial", .con_id = "apb_pclk"},
-        { .dev_id = "imx28-dma-apbx", },
-        { .dev_id = "80024000.dma-apbx", },
-};
-static struct clk_lookup ssp0_lookups[] = {
-        { .dev_id = "imx28-mmc.0", },
-        { .dev_id = "80010000.ssp", },
-};
-static struct clk_lookup ssp1_lookups[] = {
-        { .dev_id = "imx28-mmc.1", },
-        { .dev_id = "80012000.ssp", },
-};
-static struct clk_lookup ssp2_lookups[] = {
-        { .dev_id = "imx28-mmc.2", },
-        { .dev_id = "80014000.ssp", },
-};
-static struct clk_lookup ssp3_lookups[] = {
-        { .dev_id = "imx28-mmc.3", },
-        { .dev_id = "80016000.ssp", },
-};
-static struct clk_lookup lcdif_lookups[] = {
-        { .dev_id = "imx28-fb", },
-        { .dev_id = "80030000.lcdif", },
-};
-static struct clk_lookup gpmi_lookups[] = {
-        { .dev_id = "imx28-gpmi-nand", },
-        { .dev_id = "8000c000.gpmi-nand", },
-};
-static struct clk_lookup fec_lookups[] = {
-        { .dev_id = "imx28-fec.0", },
-        { .dev_id = "imx28-fec.1", },
-        { .dev_id = "800f0000.ethernet", },
-        { .dev_id = "800f4000.ethernet", },
-};
-static struct clk_lookup can0_lookups[] = {
-        { .dev_id = "flexcan.0", },
-        { .dev_id = "80032000.can", },
-};
-static struct clk_lookup can1_lookups[] = {
-        { .dev_id = "flexcan.1", },
-        { .dev_id = "80034000.can", },
-};
-static struct clk_lookup saif0_lookups[] = {
-        { .dev_id = "mxs-saif.0", },
-        { .dev_id = "80042000.saif", },
-};
-static struct clk_lookup saif1_lookups[] = {
-        { .dev_id = "mxs-saif.1", },
-        { .dev_id = "80046000.saif", },
-};
 static const char *sel_cpu[]  __initconst = { "ref_cpu", "ref_xtal", };
 static const char *sel_io0[]  __initconst = { "ref_io0", "ref_xtal", };
 static const char *sel_io1[]  __initconst = { "ref_io1", "ref_xtal", };
@@ -228,6 +145,7 @@ enum imx28_clk {
 };
 static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
 static enum imx28_clk clks_init_on[] __initdata = {
        cpu, hbus, xbus, emi, uart,
@@ -235,6 +153,7 @@ static enum imx28_clk clks_init_on[] __initdata = {
 int __init mx28_clocks_init(void)
 {
+        struct device_node *np;
        int i;
        clk_misc_init();
@@ -312,27 +231,15 @@ int __init mx28_clocks_init(void)
                        return PTR_ERR(clks[i]);
                }
+        np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
+        if (np) {
+                clk_data.clks = clks;
+                clk_data.clk_num = ARRAY_SIZE(clks);
+                of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+        }
        clk_register_clkdev(clks[clk32k], NULL, "timrot");
        clk_register_clkdev(clks[enet_out], NULL, "enet_out");
-        clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
-        clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
-        clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
-        clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
-        clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups));
-        clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups));
-        clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups));
-        clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups));
-        clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups));
-        clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups));
-        clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups));
-        clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups));
-        clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
-        clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
-        clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
-        clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy");
-        clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy");
-        clk_register_clkdev(clks[usb0], NULL, "80080000.usb");
-        clk_register_clkdev(clks[usb1], NULL, "80090000.usb");
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clks[clks_init_on[i]]);
diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile
new file mode 100644
index 000000000000..858fbfe66281
--- /dev/null
+++ b/drivers/clk/ux500/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for ux500 clocks
+#
+# Clock types
+obj-y += clk-prcc.o
+obj-y += clk-prcmu.o
+# Clock definitions
+obj-y += u8500_clk.o
+obj-y += u9540_clk.o
+obj-y += u8540_clk.o
diff --git a/drivers/clk/ux500/clk-prcc.c b/drivers/clk/ux500/clk-prcc.c
new file mode 100644
index 000000000000..7eee7f768355
--- /dev/null
+++ b/drivers/clk/ux500/clk-prcc.c
@@ -0,0 +1,164 @@
+/*
+ * PRCC clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <mach/hardware.h>
+#include "clk.h"
+#define PRCC_PCKEN                      0x000
+#define PRCC_PCKDIS                     0x004
+#define PRCC_KCKEN                      0x008
+#define PRCC_KCKDIS                     0x00C
+#define PRCC_PCKSR                      0x010
+#define PRCC_KCKSR                      0x014
+#define to_clk_prcc(_hw) container_of(_hw, struct clk_prcc, hw)
+struct clk_prcc {
+        struct clk_hw hw;
+        void __iomem *base;
+        u32 cg_sel;
+        int is_enabled;
+};
+/* PRCC clock operations. */
+static int clk_prcc_pclk_enable(struct clk_hw *hw)
+{
+        struct clk_prcc *clk = to_clk_prcc(hw);
+        writel(clk->cg_sel, (clk->base + PRCC_PCKEN));
+        while (!(readl(clk->base + PRCC_PCKSR) & clk->cg_sel))
+                cpu_relax();
+        clk->is_enabled = 1;
+        return 0;
+}
+static void clk_prcc_pclk_disable(struct clk_hw *hw)
+{
+        struct clk_prcc *clk = to_clk_prcc(hw);
+        writel(clk->cg_sel, (clk->base + PRCC_PCKDIS));
+        clk->is_enabled = 0;
+}
+static int clk_prcc_kclk_enable(struct clk_hw *hw)
+{
+        struct clk_prcc *clk = to_clk_prcc(hw);
+        writel(clk->cg_sel, (clk->base + PRCC_KCKEN));
+        while (!(readl(clk->base + PRCC_KCKSR) & clk->cg_sel))
+                cpu_relax();
+        clk->is_enabled = 1;
+        return 0;
+}
+static void clk_prcc_kclk_disable(struct clk_hw *hw)
+{
+        struct clk_prcc *clk = to_clk_prcc(hw);
+        writel(clk->cg_sel, (clk->base + PRCC_KCKDIS));
+        clk->is_enabled = 0;
+}
+static int clk_prcc_is_enabled(struct clk_hw *hw)
+{
+        struct clk_prcc *clk = to_clk_prcc(hw);
+        return clk->is_enabled;
+}
+static struct clk_ops clk_prcc_pclk_ops = {
+        .enable = clk_prcc_pclk_enable,
+        .disable = clk_prcc_pclk_disable,
+        .is_enabled = clk_prcc_is_enabled,
+};
+static struct clk_ops clk_prcc_kclk_ops = {
+        .enable = clk_prcc_kclk_enable,
+        .disable = clk_prcc_kclk_disable,
+        .is_enabled = clk_prcc_is_enabled,
+};
+static struct clk *clk_reg_prcc(const char *name,
+                                const char *parent_name,
+                                resource_size_t phy_base,
+                                u32 cg_sel,
+                                unsigned long flags,
+                                struct clk_ops *clk_prcc_ops)
+{
+        struct clk_prcc *clk;
+        struct clk_init_data clk_prcc_init;
+        struct clk *clk_reg;
+        if (!name) {
+                pr_err("clk_prcc: %s invalid arguments passed\n", __func__);
+                return ERR_PTR(-EINVAL);
+        }
+        clk = kzalloc(sizeof(struct clk_prcc), GFP_KERNEL);
+        if (!clk) {
+                pr_err("clk_prcc: %s could not allocate clk\n", __func__);
+                return ERR_PTR(-ENOMEM);
+        }
+        clk->base = ioremap(phy_base, SZ_4K);
+        if (!clk->base)
+                goto free_clk;
+        clk->cg_sel = cg_sel;
+        clk->is_enabled = 1;
+        clk_prcc_init.name = name;
+        clk_prcc_init.ops = clk_prcc_ops;
+        clk_prcc_init.flags = flags;
+        clk_prcc_init.parent_names = (parent_name ? &parent_name : NULL);
+        clk_prcc_init.num_parents = (parent_name ? 1 : 0);
+        clk->hw.init = &clk_prcc_init;
+        clk_reg = clk_register(NULL, &clk->hw);
+        if (IS_ERR_OR_NULL(clk_reg))
+                goto unmap_clk;
+        return clk_reg;
+unmap_clk:
+        iounmap(clk->base);
+free_clk:
+        kfree(clk);
+        pr_err("clk_prcc: %s failed to register clk\n", __func__);
+        return ERR_PTR(-ENOMEM);
+}
+struct clk *clk_reg_prcc_pclk(const char *name,
+                              const char *parent_name,
+                              resource_size_t phy_base,
+                              u32 cg_sel,
+                              unsigned long flags)
+{
+        return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+                        &clk_prcc_pclk_ops);
+}
+struct clk *clk_reg_prcc_kclk(const char *name,
+                              const char *parent_name,
+                              resource_size_t phy_base,
+                              u32 cg_sel,
+                              unsigned long flags)
+{
+        return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags,
+                        &clk_prcc_kclk_ops);
+}
diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c
new file mode 100644
index 000000000000..930cdfeb47ab
--- /dev/null
+++ b/drivers/clk/ux500/clk-prcmu.c
@@ -0,0 +1,252 @@
+/*
+ * PRCMU clock implementation for ux500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/clk-provider.h>
+#include <linux/clk-private.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+#define to_clk_prcmu(_hw) container_of(_hw, struct clk_prcmu, hw)
+struct clk_prcmu {
+        struct clk_hw hw;
+        u8 cg_sel;
+        int is_enabled;
+};
+/* PRCMU clock operations. */
+static int clk_prcmu_prepare(struct clk_hw *hw)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        return prcmu_request_clock(clk->cg_sel, true);
+}
+static void clk_prcmu_unprepare(struct clk_hw *hw)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        if (prcmu_request_clock(clk->cg_sel, false))
+                pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+                        hw->init->name);
+}
+static int clk_prcmu_enable(struct clk_hw *hw)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        clk->is_enabled = 1;
+        return 0;
+}
+static void clk_prcmu_disable(struct clk_hw *hw)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        clk->is_enabled = 0;
+}
+static int clk_prcmu_is_enabled(struct clk_hw *hw)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        return clk->is_enabled;
+}
+static unsigned long clk_prcmu_recalc_rate(struct clk_hw *hw,
+                                           unsigned long parent_rate)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        return prcmu_clock_rate(clk->cg_sel);
+}
+static long clk_prcmu_round_rate(struct clk_hw *hw, unsigned long rate,
+                                 unsigned long *parent_rate)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        return prcmu_round_clock_rate(clk->cg_sel, rate);
+}
+static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate,
+                              unsigned long parent_rate)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        return prcmu_set_clock_rate(clk->cg_sel, rate);
+}
+static int request_ape_opp100(bool enable)
+{
+        static int reqs;
+        int err = 0;
+        if (enable) {
+                if (!reqs)
+                        err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+                                                        "clock", 100);
+                if (!err)
+                        reqs++;
+        } else {
+                reqs--;
+                if (!reqs)
+                        prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+                                                "clock");
+        }
+        return err;
+}
+static int clk_prcmu_opp_prepare(struct clk_hw *hw)
+{
+        int err;
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        err = request_ape_opp100(true);
+        if (err) {
+                pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
+                        __func__, hw->init->name);
+                return err;
+        }
+        err = prcmu_request_clock(clk->cg_sel, true);
+        if (err)
+                request_ape_opp100(false);
+        return err;
+}
+static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
+{
+        struct clk_prcmu *clk = to_clk_prcmu(hw);
+        if (prcmu_request_clock(clk->cg_sel, false))
+                goto out_error;
+        if (request_ape_opp100(false))
+                goto out_error;
+        return;
+out_error:
+        pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+                hw->init->name);
+}
+static struct clk_ops clk_prcmu_scalable_ops = {
+        .prepare = clk_prcmu_prepare,
+        .unprepare = clk_prcmu_unprepare,
+        .enable = clk_prcmu_enable,
+        .disable = clk_prcmu_disable,
+        .is_enabled = clk_prcmu_is_enabled,
+        .recalc_rate = clk_prcmu_recalc_rate,
+        .round_rate = clk_prcmu_round_rate,
+        .set_rate = clk_prcmu_set_rate,
+};
+static struct clk_ops clk_prcmu_gate_ops = {
+        .prepare = clk_prcmu_prepare,
+        .unprepare = clk_prcmu_unprepare,
+        .enable = clk_prcmu_enable,
+        .disable = clk_prcmu_disable,
+        .is_enabled = clk_prcmu_is_enabled,
+        .recalc_rate = clk_prcmu_recalc_rate,
+};
+static struct clk_ops clk_prcmu_rate_ops = {
+        .is_enabled = clk_prcmu_is_enabled,
+        .recalc_rate = clk_prcmu_recalc_rate,
+};
+static struct clk_ops clk_prcmu_opp_gate_ops = {
+        .prepare = clk_prcmu_opp_prepare,
+        .unprepare = clk_prcmu_opp_unprepare,
+        .enable = clk_prcmu_enable,
+        .disable = clk_prcmu_disable,
+        .is_enabled = clk_prcmu_is_enabled,
+        .recalc_rate = clk_prcmu_recalc_rate,
+};
+static struct clk *clk_reg_prcmu(const char *name,
+                                 const char *parent_name,
+                                 u8 cg_sel,
+                                 unsigned long rate,
+                                 unsigned long flags,
+                                 struct clk_ops *clk_prcmu_ops)
+{
+        struct clk_prcmu *clk;
+        struct clk_init_data clk_prcmu_init;
+        struct clk *clk_reg;
+        if (!name) {
+                pr_err("clk_prcmu: %s invalid arguments passed\n", __func__);
+                return ERR_PTR(-EINVAL);
+        }
+        clk = kzalloc(sizeof(struct clk_prcmu), GFP_KERNEL);
+        if (!clk) {
+                pr_err("clk_prcmu: %s could not allocate clk\n", __func__);
+                return ERR_PTR(-ENOMEM);
+        }
+        clk->cg_sel = cg_sel;
+        clk->is_enabled = 1;
+        /* "rate" can be used for changing the initial frequency */
+        if (rate)
+                prcmu_set_clock_rate(cg_sel, rate);
+        clk_prcmu_init.name = name;
+        clk_prcmu_init.ops = clk_prcmu_ops;
+        clk_prcmu_init.flags = flags;
+        clk_prcmu_init.parent_names = (parent_name ? &parent_name : NULL);
+        clk_prcmu_init.num_parents = (parent_name ? 1 : 0);
+        clk->hw.init = &clk_prcmu_init;
+        clk_reg = clk_register(NULL, &clk->hw);
+        if (IS_ERR_OR_NULL(clk_reg))
+                goto free_clk;
+        return clk_reg;
+free_clk:
+        kfree(clk);
+        pr_err("clk_prcmu: %s failed to register clk\n", __func__);
+        return ERR_PTR(-ENOMEM);
+}
+struct clk *clk_reg_prcmu_scalable(const char *name,
+                                   const char *parent_name,
+                                   u8 cg_sel,
+                                   unsigned long rate,
+                                   unsigned long flags)
+{
+        return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags,
+                        &clk_prcmu_scalable_ops);
+}
+struct clk *clk_reg_prcmu_gate(const char *name,
+                               const char *parent_name,
+                               u8 cg_sel,
+                               unsigned long flags)
+{
+        return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+                        &clk_prcmu_gate_ops);
+}
+struct clk *clk_reg_prcmu_rate(const char *name,
+                               const char *parent_name,
+                               u8 cg_sel,
+                               unsigned long flags)
+{
+        return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+                        &clk_prcmu_rate_ops);
+}
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+                                   const char *parent_name,
+                                   u8 cg_sel,
+                                   unsigned long flags)
+{
+        return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags,
+                        &clk_prcmu_opp_gate_ops);
+}
diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h
new file mode 100644
index 000000000000..836d7d16751e
--- /dev/null
+++ b/drivers/clk/ux500/clk.h
@@ -0,0 +1,48 @@
+/*
+ * Clocks for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __UX500_CLK_H
+#define __UX500_CLK_H
+#include <linux/clk.h>
+struct clk *clk_reg_prcc_pclk(const char *name,
+                              const char *parent_name,
+                              unsigned int phy_base,
+                              u32 cg_sel,
+                              unsigned long flags);
+struct clk *clk_reg_prcc_kclk(const char *name,
+                              const char *parent_name,
+                              unsigned int phy_base,
+                              u32 cg_sel,
+                              unsigned long flags);
+struct clk *clk_reg_prcmu_scalable(const char *name,
+                                   const char *parent_name,
+                                   u8 cg_sel,
+                                   unsigned long rate,
+                                   unsigned long flags);
+struct clk *clk_reg_prcmu_gate(const char *name,
+                               const char *parent_name,
+                               u8 cg_sel,
+                               unsigned long flags);
+struct clk *clk_reg_prcmu_rate(const char *name,
+                               const char *parent_name,
+                               u8 cg_sel,
+                               unsigned long flags);
+struct clk *clk_reg_prcmu_opp_gate(const char *name,
+                                   const char *parent_name,
+                                   u8 cg_sel,
+                                   unsigned long flags);
+#endif /* __UX500_CLK_H */
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
new file mode 100644
index 000000000000..ca4a25ed844c
--- /dev/null
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -0,0 +1,477 @@
+/*
+ * Clock definitions for u8500 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+#include "clk.h"
+void u8500_clk_init(void)
+{
+        struct prcmu_fw_version *fw_version;
+        const char *sgaclk_parent = NULL;
+        struct clk *clk;
+        /* Clock sources */
+        clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0,
+                                CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+        clk_register_clkdev(clk, "soc0_pll", NULL);
+        clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1,
+                                CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+        clk_register_clkdev(clk, "soc1_pll", NULL);
+        clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR,
+                                CLK_IS_ROOT|CLK_IGNORE_UNUSED);
+        clk_register_clkdev(clk, "ddr_pll", NULL);
+        /* FIXME: Add sys, ulp and int clocks here. */
+        clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL",
+                                CLK_IS_ROOT|CLK_IGNORE_UNUSED,
+                                32768);
+        clk_register_clkdev(clk, "clk32k", NULL);
+        clk_register_clkdev(clk, NULL, "rtc-pl031");
+        /* PRCMU clocks */
+        fw_version = prcmu_get_fw_version();
+        if (fw_version != NULL) {
+                switch (fw_version->project) {
+                case PRCMU_FW_PROJECT_U8500_C2:
+                case PRCMU_FW_PROJECT_U8520:
+                case PRCMU_FW_PROJECT_U8420:
+                        sgaclk_parent = "soc0_pll";
+                        break;
+                default:
+                        break;
+                }
+        }
+        if (sgaclk_parent)
+                clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent,
+                                        PRCMU_SGACLK, 0);
+        else
+                clk = clk_reg_prcmu_gate("sgclk", NULL,
+                                        PRCMU_SGACLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "mali");
+        clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "UART");
+        clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "MSP02");
+        clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "MSP1");
+        clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "I2C");
+        clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "slim");
+        clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "PERIPH1");
+        clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "PERIPH2");
+        clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "PERIPH3");
+        clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "PERIPH5");
+        clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "PERIPH6");
+        clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "PERIPH7");
+        clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0,
+                                CLK_IS_ROOT|CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "lcd");
+        clk_register_clkdev(clk, "lcd", "mcde");
+        clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "bml");
+        clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0,
+                                CLK_IS_ROOT|CLK_SET_RATE_GATE);
+        clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0,
+                                CLK_IS_ROOT|CLK_SET_RATE_GATE);
+        clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0,
+                                CLK_IS_ROOT|CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "hdmi");
+        clk_register_clkdev(clk, "hdmi", "mcde");
+        clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "apeat");
+        clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK,
+                                CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "apetrace");
+        clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "mcde");
+        clk_register_clkdev(clk, "mcde", "mcde");
+        clk_register_clkdev(clk, "dsisys", "dsilink.0");
+        clk_register_clkdev(clk, "dsisys", "dsilink.1");
+        clk_register_clkdev(clk, "dsisys", "dsilink.2");
+        clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK,
+                                CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "ipi2");
+        clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK,
+                                CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "dsialt");
+        clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "dma40.0");
+        clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "b2r2");
+        clk_register_clkdev(clk, NULL, "b2r2_core");
+        clk_register_clkdev(clk, NULL, "U8500-B2R2.0");
+        clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0,
+                                CLK_IS_ROOT|CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "tv");
+        clk_register_clkdev(clk, "tv", "mcde");
+        clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "SSP");
+        clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "rngclk");
+        clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "uicc");
+        /*
+         * FIXME: The MTU clocks might need some kind of "parent muxed join"
+         * and these have no K-clocks. For now, we ignore the missing
+         * connection to the corresponding P-clocks, p6_mtu0_clk and
+         * p6_mtu1_clk. Instead timclk is used which is the valid parent.
+         */
+        clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "mtu0");
+        clk_register_clkdev(clk, NULL, "mtu1");
+        clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT);
+        clk_register_clkdev(clk, NULL, "sdmmc");
+        clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk",
+                                PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, "dsihs2", "mcde");
+        clk_register_clkdev(clk, "dsihs2", "dsilink.2");
+        clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll",
+                                PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, "dsihs0", "mcde");
+        clk_register_clkdev(clk, "dsihs0", "dsilink.0");
+        clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll",
+                                PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, "dsihs1", "mcde");
+        clk_register_clkdev(clk, "dsihs1", "dsilink.1");
+        clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk",
+                                PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, "dsilp0", "dsilink.0");
+        clk_register_clkdev(clk, "dsilp0", "mcde");
+        clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk",
+                                PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, "dsilp1", "dsilink.1");
+        clk_register_clkdev(clk, "dsilp1", "mcde");
+        clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk",
+                                PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, "dsilp2", "dsilink.2");
+        clk_register_clkdev(clk, "dsilp2", "mcde");
+        clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS,
+                                CLK_IS_ROOT|CLK_GET_RATE_NOCACHE|
+                                CLK_IGNORE_UNUSED);
+        clk_register_clkdev(clk, NULL, "smp_twd");
+        /*
+         * FIXME: Add special handled PRCMU clocks here:
+         * 1. clk_arm, use PRCMU_ARMCLK.
+         * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl.
+         * 3. ab9540_clkout1yuv, see clkout0yuv
+         */
+        /* PRCC P-clocks */
+        clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(0), 0);
+        clk_register_clkdev(clk, "apb_pclk", "uart0");
+        clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(1), 0);
+        clk_register_clkdev(clk, "apb_pclk", "uart1");
+        clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(2), 0);
+        clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(3), 0);
+        clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(4), 0);
+        clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(5), 0);
+        clk_register_clkdev(clk, "apb_pclk", "sdi0");
+        clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(6), 0);
+        clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(7), 0);
+        clk_register_clkdev(clk, NULL, "spi3");
+        clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(8), 0);
+        clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(9), 0);
+        clk_register_clkdev(clk, NULL, "gpio.0");
+        clk_register_clkdev(clk, NULL, "gpio.1");
+        clk_register_clkdev(clk, NULL, "gpioblock0");
+        clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(10), 0);
+        clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
+                                BIT(11), 0);
+        clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(0), 0);
+        clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(1), 0);
+        clk_register_clkdev(clk, NULL, "spi2");
+        clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(2), 0);
+        clk_register_clkdev(clk, NULL, "spi1");
+        clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(3), 0);
+        clk_register_clkdev(clk, NULL, "pwl");
+        clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(4), 0);
+        clk_register_clkdev(clk, "apb_pclk", "sdi4");
+        clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(5), 0);
+        clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(6), 0);
+        clk_register_clkdev(clk, "apb_pclk", "sdi1");
+        clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(7), 0);
+        clk_register_clkdev(clk, "apb_pclk", "sdi3");
+        clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(8), 0);
+        clk_register_clkdev(clk, NULL, "spi0");
+        clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(9), 0);
+        clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0");
+        clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(10), 0);
+        clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
+        clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(11), 0);
+        clk_register_clkdev(clk, NULL, "gpio.6");
+        clk_register_clkdev(clk, NULL, "gpio.7");
+        clk_register_clkdev(clk, NULL, "gpioblock1");
+        clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE,
+                                BIT(11), 0);
+        clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(0), 0);
+        clk_register_clkdev(clk, NULL, "fsmc");
+        clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(1), 0);
+        clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(2), 0);
+        clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(3), 0);
+        clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(4), 0);
+        clk_register_clkdev(clk, "apb_pclk", "sdi2");
+        clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(5), 0);
+        clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(6), 0);
+        clk_register_clkdev(clk, "apb_pclk", "uart2");
+        clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(7), 0);
+        clk_register_clkdev(clk, "apb_pclk", "sdi5");
+        clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", U8500_CLKRST3_BASE,
+                                BIT(8), 0);
+        clk_register_clkdev(clk, NULL, "gpio.2");
+        clk_register_clkdev(clk, NULL, "gpio.3");
+        clk_register_clkdev(clk, NULL, "gpio.4");
+        clk_register_clkdev(clk, NULL, "gpio.5");
+        clk_register_clkdev(clk, NULL, "gpioblock2");
+        clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", U8500_CLKRST5_BASE,
+                                BIT(0), 0);
+        clk_register_clkdev(clk, "usb", "musb-ux500.0");
+        clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", U8500_CLKRST5_BASE,
+                                BIT(1), 0);
+        clk_register_clkdev(clk, NULL, "gpio.8");
+        clk_register_clkdev(clk, NULL, "gpioblock3");
+        clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(0), 0);
+        clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(1), 0);
+        clk_register_clkdev(clk, NULL, "cryp0");
+        clk_register_clkdev(clk, NULL, "cryp1");
+        clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(2), 0);
+        clk_register_clkdev(clk, NULL, "hash0");
+        clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(3), 0);
+        clk_register_clkdev(clk, NULL, "pka");
+        clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(4), 0);
+        clk_register_clkdev(clk, NULL, "hash1");
+        clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(5), 0);
+        clk_register_clkdev(clk, NULL, "cfgreg");
+        clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(6), 0);
+        clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE,
+                                BIT(7), 0);
+        /* PRCC K-clocks
+         *
+         * FIXME: Some drivers requires PERPIH[n| to be automatically enabled
+         * by enabling just the K-clock, even if it is not a valid parent to
+         * the K-clock. Until drivers get fixed we might need some kind of
+         * "parent muxed join".
+         */
+        /* Periph1 */
+        clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
+                        U8500_CLKRST1_BASE, BIT(0), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "uart0");
+        clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
+                        U8500_CLKRST1_BASE, BIT(1), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "uart1");
+        clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
+                        U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
+                        U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
+                        U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
+                        U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "sdi0");
+        clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
+                        U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
+                        U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+        /* FIXME: Redefinition of BIT(3). */
+        clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
+                        U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
+                        U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+        /* Periph2 */
+        clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
+                        U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
+                        U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "sdi4");
+        clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
+                        U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
+                        U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "sdi1");
+        clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
+                        U8500_CLKRST2_BASE, BIT(5), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "sdi3");
+        /* Note that rate is received from parent. */
+        clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
+                        U8500_CLKRST2_BASE, BIT(6),
+                        CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+        clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
+                        U8500_CLKRST2_BASE, BIT(7),
+                        CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+        /* Periph3 */
+        clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
+                        U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
+                        U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
+                        U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
+                        U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "sdi2");
+        clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
+                        U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE);
+        clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
+                        U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "uart2");
+        clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
+                        U8500_CLKRST3_BASE, BIT(7), CLK_SET_RATE_GATE);
+        clk_register_clkdev(clk, NULL, "sdi5");
+        /* Periph6 */
+        clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
+                        U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE);
+}
diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c
new file mode 100644
index 000000000000..10adfd2ead21
--- /dev/null
+++ b/drivers/clk/ux500/u8540_clk.c
@@ -0,0 +1,21 @@
+/*
+ * Clock definitions for u8540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+#include "clk.h"
+void u8540_clk_init(void)
+{
+        /* register clocks here */
+}
diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c
new file mode 100644
index 000000000000..dbc0191e16c8
--- /dev/null
+++ b/drivers/clk/ux500/u9540_clk.c
@@ -0,0 +1,21 @@
+/*
+ * Clock definitions for u9540 platform.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/clk-ux500.h>
+#include "clk.h"
+void u9540_clk_init(void)
+{
+        /* register clocks here */
+}
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index 50cf6a2ee693..c0a0f6478798 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,3 +1,4 @@
 # Makefile for Versatile-specific clocks
 obj-$(CONFIG_ICST)              += clk-icst.o
 obj-$(CONFIG_ARCH_INTEGRATOR)   += clk-integrator.o
+obj-$(CONFIG_ARCH_REALVIEW)     += clk-realview.o
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
new file mode 100644
index 000000000000..e21a99cef378
--- /dev/null
+++ b/drivers/clk/versatile/clk-realview.c
@@ -0,0 +1,114 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "clk-icst.h"
+/*
+ * Implementation of the ARM RealView clock trees.
+ */
+static void __iomem *sys_lock;
+static void __iomem *sys_vcoreg;
+/**
+ * realview_oscvco_get() - get ICST OSC settings for the RealView
+ */
+static struct icst_vco realview_oscvco_get(void)
+{
+        u32 val;
+        struct icst_vco vco;
+        val = readl(sys_vcoreg);
+        vco.v = val & 0x1ff;
+        vco.r = (val >> 9) & 0x7f;
+        vco.s = (val >> 16) & 03;
+        return vco;
+}
+static void realview_oscvco_set(struct icst_vco vco)
+{
+        u32 val;
+        val = readl(sys_vcoreg) & ~0x7ffff;
+        val |= vco.v | (vco.r << 9) | (vco.s << 16);
+        /* This magic unlocks the CM VCO so it can be controlled */
+        writel(0xa05f, sys_lock);
+        writel(val, sys_vcoreg);
+        /* This locks the CM again */
+        writel(0, sys_lock);
+}
+static const struct icst_params realview_oscvco_params = {
+        .ref            = 24000000,
+        .vco_max        = ICST307_VCO_MAX,
+        .vco_min        = ICST307_VCO_MIN,
+        .vd_min         = 4 + 8,
+        .vd_max         = 511 + 8,
+        .rd_min         = 1 + 2,
+        .rd_max         = 127 + 2,
+        .s2div          = icst307_s2div,
+        .idx2s          = icst307_idx2s,
+};
+static const struct clk_icst_desc __initdata realview_icst_desc = {
+        .params = &realview_oscvco_params,
+        .getvco = realview_oscvco_get,
+        .setvco = realview_oscvco_set,
+};
+/*
+ * realview_clk_init() - set up the RealView clock tree
+ */
+void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176)
+{
+        struct clk *clk;
+        sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET;
+        if (is_pb1176)
+                sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET;
+        else
+                sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET;
+        /* APB clock dummy */
+        clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+        clk_register_clkdev(clk, "apb_pclk", NULL);
+        /* 24 MHz clock */
+        clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+                                24000000);
+        clk_register_clkdev(clk, NULL, "dev:uart0");
+        clk_register_clkdev(clk, NULL, "dev:uart1");
+        clk_register_clkdev(clk, NULL, "dev:uart2");
+        clk_register_clkdev(clk, NULL, "fpga:kmi0");
+        clk_register_clkdev(clk, NULL, "fpga:kmi1");
+        clk_register_clkdev(clk, NULL, "fpga:mmc0");
+        clk_register_clkdev(clk, NULL, "dev:ssp0");
+        if (is_pb1176) {
+                /*
+                 * UART3 is on the dev chip in PB1176
+                 * UART4 only exists in PB1176
+                 */
+                clk_register_clkdev(clk, NULL, "dev:uart3");
+                clk_register_clkdev(clk, NULL, "dev:uart4");
+        } else
+                clk_register_clkdev(clk, NULL, "fpga:uart3");
+        /* 1 MHz clock */
+        clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+                                      1000000);
+        clk_register_clkdev(clk, NULL, "sp804");
+        /* ICST VCO clock */
+        clk = icst_clk_register(NULL, &realview_icst_desc);
+        clk_register_clkdev(clk, NULL, "dev:clcd");
+        clk_register_clkdev(clk, NULL, "issp:clcd");
+}
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 9cac88a65f78..9528779ca463 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -26,6 +26,8 @@
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
+#include <asm/mach/irq.h>
 #include <mach/irqs.h>
 /*
@@ -59,6 +61,7 @@
 #define BANK_OFF(n)     (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 int pxa_last_gpio;
+static int irq_base;
 #ifdef CONFIG_OF
 static struct irq_domain *domain;
@@ -167,63 +170,14 @@ static inline int __gpio_is_occupied(unsigned gpio)
        return ret;
 }
-#ifdef CONFIG_ARCH_PXA
-static inline int __pxa_gpio_to_irq(int gpio)
-{
-        if (gpio_is_pxa_type(gpio_type))
-                return PXA_GPIO_TO_IRQ(gpio);
-        return -1;
-}
-static inline int __pxa_irq_to_gpio(int irq)
-{
-        if (gpio_is_pxa_type(gpio_type))
-                return irq - PXA_GPIO_TO_IRQ(0);
-        return -1;
-}
-#else
-static inline int __pxa_gpio_to_irq(int gpio) { return -1; }
-static inline int __pxa_irq_to_gpio(int irq) { return -1; }
-#endif
-#ifdef CONFIG_ARCH_MMP
-static inline int __mmp_gpio_to_irq(int gpio)
-{
-        if (gpio_is_mmp_type(gpio_type))
-                return MMP_GPIO_TO_IRQ(gpio);
-        return -1;
-}
-static inline int __mmp_irq_to_gpio(int irq)
-{
-        if (gpio_is_mmp_type(gpio_type))
-                return irq - MMP_GPIO_TO_IRQ(0);
-        return -1;
-}
-#else
-static inline int __mmp_gpio_to_irq(int gpio) { return -1; }
-static inline int __mmp_irq_to_gpio(int irq) { return -1; }
-#endif
 static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-        int gpio, ret;
+        return chip->base + offset + irq_base;
-        gpio = chip->base + offset;
-        ret = __pxa_gpio_to_irq(gpio);
-        if (ret >= 0)
-                return ret;
-        return __mmp_gpio_to_irq(gpio);
 }
 int pxa_irq_to_gpio(int irq)
 {
-        int ret;
+        return irq - irq_base;
-        ret = __pxa_irq_to_gpio(irq);
-        if (ret >= 0)
-                return ret;
-        return __mmp_irq_to_gpio(irq);
 }
 static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -403,6 +357,9 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
        struct pxa_gpio_chip *c;
        int loop, gpio, gpio_base, n;
        unsigned long gedr;
+        struct irq_chip *chip = irq_desc_get_chip(desc);
+        chained_irq_enter(chip, desc);
        do {
                loop = 0;
@@ -422,6 +379,8 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
                        }
                }
        } while (loop);
+        chained_irq_exit(chip, desc);
 }
 static void pxa_ack_muxed_gpio(struct irq_data *d)
@@ -535,7 +494,7 @@ const struct irq_domain_ops pxa_irq_domain_ops = {
 static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev)
 {
-        int ret, nr_banks, nr_gpios, irq_base;
+        int ret, nr_banks, nr_gpios;
        struct device_node *prev, *next, *np = pdev->dev.of_node;
        const struct of_device_id *of_id =
                                of_match_device(pxa_gpio_dt_ids, &pdev->dev);
@@ -590,10 +549,20 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev)
        int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
        ret = pxa_gpio_probe_dt(pdev);
-        if (ret < 0)
+        if (ret < 0) {
                pxa_last_gpio = pxa_gpio_nums();
-        else
+#ifdef CONFIG_ARCH_PXA
+                if (gpio_is_pxa_type(gpio_type))
+                        irq_base = PXA_GPIO_TO_IRQ(0);
+#endif
+#ifdef CONFIG_ARCH_MMP
+                if (gpio_is_mmp_type(gpio_type))
+                        irq_base = MMP_GPIO_TO_IRQ(0);
+#endif
+        } else {
                use_of = 1;
+        }
        if (!pxa_last_gpio)
                return -EINVAL;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 1c169324e357..8af4b06e80f7 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -938,6 +938,67 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
                s3c_gpiolib_track(chip);
 }
+#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF)
+static int s3c24xx_gpio_xlate(struct gpio_chip *gc,
+                        const struct of_phandle_args *gpiospec, u32 *flags)
+{
+        unsigned int pin;
+        if (WARN_ON(gc->of_gpio_n_cells < 3))
+                return -EINVAL;
+        if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+                return -EINVAL;
+        if (gpiospec->args[0] > gc->ngpio)
+                return -EINVAL;
+        pin = gc->base + gpiospec->args[0];
+        if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
+                pr_warn("gpio_xlate: failed to set pin function\n");
+        if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
+                pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+        if (flags)
+                *flags = gpiospec->args[2] >> 16;
+        return gpiospec->args[0];
+}
+static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {
+        { .compatible = "samsung,s3c24xx-gpio", },
+        {}
+};
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+                                                 u64 base, u64 offset)
+{
+        struct gpio_chip *gc =  &chip->chip;
+        u64 address;
+        if (!of_have_populated_dt())
+                return;
+        address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+        gc->of_node = of_find_matching_node_by_address(NULL,
+                        s3c24xx_gpio_dt_match, address);
+        if (!gc->of_node) {
+                pr_info("gpio: device tree node not found for gpio controller"
+                        " with base address %08llx\n", address);
+                return;
+        }
+        gc->of_gpio_n_cells = 3;
+        gc->of_xlate = s3c24xx_gpio_xlate;
+}
+#else
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+                                                 u64 base, u64 offset)
+{
+        return;
+}
+#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */
 static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
                                             int nr_chips, void __iomem *base)
 {
@@ -962,6 +1023,8 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
                        gc->direction_output = samsung_gpiolib_2bit_output;
                samsung_gpiolib_add(chip);
+                s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);
        }
 }
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index f030880bc9bb..c5f8ca233e1f 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -396,6 +396,29 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
 static int gpio_twl4030_remove(struct platform_device *pdev);
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+{
+        struct twl4030_gpio_platform_data *omap_twl_info;
+        omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
+        if (!omap_twl_info)
+                return NULL;
+        omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
+                        "ti,use-leds");
+        of_property_read_u32(dev->of_node, "ti,debounce",
+                             &omap_twl_info->debounce);
+        of_property_read_u32(dev->of_node, "ti,mmc-cd",
+                             (u32 *)&omap_twl_info->mmc_cd);
+        of_property_read_u32(dev->of_node, "ti,pullups",
+                             &omap_twl_info->pullups);
+        of_property_read_u32(dev->of_node, "ti,pulldowns",
+                             &omap_twl_info->pulldowns);
+        return omap_twl_info;
+}
 static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
 {
        struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -428,33 +451,37 @@ no_irqs:
        twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
        twl_gpiochip.dev = &pdev->dev;
-        if (pdata) {
+        if (node)
-                /*
+                pdata = of_gpio_twl4030(&pdev->dev);
-                 * NOTE:  boards may waste power if they don't set pullups
-                 * and pulldowns correctly ... default for non-ULPI pins is
+        if (pdata == NULL) {
-                 * pulldown, and some other pins may have external pullups
+                dev_err(&pdev->dev, "Platform data is missing\n");
-                 * or pulldowns.  Careful!
+                return -ENXIO;
-                 */
-                ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
-                if (ret)
-                        dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
-                                        pdata->pullups, pdata->pulldowns,
-                                        ret);
-                ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
-                if (ret)
-                        dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
-                                        pdata->debounce, pdata->mmc_cd,
-                                        ret);
-                /*
-                 * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
-                 * is (still) clear if use_leds is set.
-                 */
-                if (pdata->use_leds)
-                        twl_gpiochip.ngpio += 2;
        }
+        /*
+         * NOTE:  boards may waste power if they don't set pullups
+         * and pulldowns correctly ... default for non-ULPI pins is
+         * pulldown, and some other pins may have external pullups
+         * or pulldowns.  Careful!
+         */
+        ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+        if (ret)
+                dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+                        pdata->pullups, pdata->pulldowns, ret);
+        ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+        if (ret)
+                dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+                        pdata->debounce, pdata->mmc_cd, ret);
+        /*
+         * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+         * is (still) clear if use_leds is set.
+         */
+        if (pdata->use_leds)
+                twl_gpiochip.ngpio += 2;
        ret = gpiochip_add(&twl_gpiochip);
        if (ret < 0) {
                dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 0e63cdd9b52a..6b67edbdbd01 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -418,6 +418,9 @@ static struct {
 static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
+/* Functions definition */
+static void compute_armss_rate(void);
 /* Spinlocks */
 static DEFINE_SPINLOCK(prcmu_lock);
 static DEFINE_SPINLOCK(clkout_lock);
@@ -517,6 +520,7 @@ static struct dsiescclk dsiescclk[3] = {
        }
 };
 /*
 * Used by MCDE to setup all necessary PRCMU registers
 */
@@ -1013,6 +1017,7 @@ int db8500_prcmu_set_arm_opp(u8 opp)
                (mb1_transfer.ack.arm_opp != opp))
                r = -EIO;
+        compute_armss_rate();
        mutex_unlock(&mb1_transfer.lock);
        return r;
@@ -1612,6 +1617,7 @@ static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
        if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
                (val & PRCM_PLL_FREQ_DIV2EN) &&
                ((reg == PRCM_PLLSOC0_FREQ) ||
+                 (reg == PRCM_PLLARM_FREQ) ||
                 (reg == PRCM_PLLDDR_FREQ))))
                div *= 2;
@@ -1661,6 +1667,39 @@ static unsigned long clock_rate(u8 clock)
        else
                return 0;
 }
+static unsigned long latest_armss_rate;
+static unsigned long armss_rate(void)
+{
+        return latest_armss_rate;
+}
+static void compute_armss_rate(void)
+{
+        u32 r;
+        unsigned long rate;
+        r = readl(PRCM_ARM_CHGCLKREQ);
+        if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) {
+                /* External ARMCLKFIX clock */
+                rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX);
+                /* Check PRCM_ARM_CHGCLKREQ divider */
+                if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL))
+                        rate /= 2;
+                /* Check PRCM_ARMCLKFIX_MGT divider */
+                r = readl(PRCM_ARMCLKFIX_MGT);
+                r &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+                rate /= r;
+        } else {/* ARM PLL */
+                rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV);
+        }
+        latest_armss_rate = rate;
+}
 static unsigned long dsiclk_rate(u8 n)
 {
@@ -1707,6 +1746,8 @@ unsigned long prcmu_clock_rate(u8 clock)
                return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
        else if (clock == PRCMU_PLLSOC1)
                return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+        else if (clock == PRCMU_ARMSS)
+                return armss_rate();
        else if (clock == PRCMU_PLLDDR)
                return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
        else if (clock == PRCMU_PLLDSI)
@@ -2693,6 +2734,7 @@ void __init db8500_prcmu_early_init(void)
                                         handle_simple_irq);
                set_irq_flags(irq, IRQF_VALID);
        }
+        compute_armss_rate();
 }
 static void __init init_prcm_registers(void)
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index 23108a6e3167..79c76ebdba52 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -61,7 +61,8 @@
 #define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3    0x2
 #define PRCM_ARM_CHGCLKREQ      (_PRCMU_BASE + 0x114)
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ   0x1
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ   BIT(0)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL      BIT(16)
 #define PRCM_PLLARM_ENABLE      (_PRCMU_BASE + 0x98)
 #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE   0x1
@@ -140,6 +141,7 @@
 /* PRCMU clock/PLL/reset registers */
 #define PRCM_PLLSOC0_FREQ          (_PRCMU_BASE + 0x080)
 #define PRCM_PLLSOC1_FREQ          (_PRCMU_BASE + 0x084)
+#define PRCM_PLLARM_FREQ           (_PRCMU_BASE + 0x088)
 #define PRCM_PLLDDR_FREQ           (_PRCMU_BASE + 0x08C)
 #define PRCM_PLL_FREQ_D_SHIFT   0
 #define PRCM_PLL_FREQ_D_MASK    BITS(0, 7)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 252aaefcacfa..d944d6ef7da8 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,6 +22,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <mach/dma.h>
 #include <plat/pxa3xx_nand.h>
@@ -1032,7 +1034,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
        struct pxa3xx_nand_platform_data *pdata;
        struct pxa3xx_nand_info *info;
        struct pxa3xx_nand_host *host;
-        struct nand_chip *chip;
+        struct nand_chip *chip = NULL;
        struct mtd_info *mtd;
        struct resource *r;
        int ret, irq, cs;
@@ -1081,21 +1083,31 @@ static int alloc_nand_resource(struct platform_device *pdev)
        }
        clk_enable(info->clk);
-        r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+        /*
-        if (r == NULL) {
+         * This is a dirty hack to make this driver work from devicetree
-                dev_err(&pdev->dev, "no resource defined for data DMA\n");
+         * bindings. It can be removed once we have a prober DMA controller
-                ret = -ENXIO;
+         * framework for DT.
-                goto fail_put_clk;
+         */
-        }
+        if (pdev->dev.of_node && cpu_is_pxa3xx()) {
-        info->drcmr_dat = r->start;
+                info->drcmr_dat = 97;
+                info->drcmr_cmd = 99;
+        } else {
+                r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+                if (r == NULL) {
+                        dev_err(&pdev->dev, "no resource defined for data DMA\n");
+                        ret = -ENXIO;
+                        goto fail_put_clk;
+                }
+                info->drcmr_dat = r->start;
-        r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+                r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-        if (r == NULL) {
+                if (r == NULL) {
-                dev_err(&pdev->dev, "no resource defined for command DMA\n");
+                        dev_err(&pdev->dev, "no resource defined for command DMA\n");
-                ret = -ENXIO;
+                        ret = -ENXIO;
-                goto fail_put_clk;
+                        goto fail_put_clk;
+                }
+                info->drcmr_cmd = r->start;
        }
-        info->drcmr_cmd = r->start;
        irq = platform_get_irq(pdev, 0);
        if (irq < 0) {
@@ -1200,12 +1212,55 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
        return 0;
 }
+#ifdef CONFIG_OF
+static struct of_device_id pxa3xx_nand_dt_ids[] = {
+        { .compatible = "marvell,pxa3xx-nand" },
+        {}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+        struct pxa3xx_nand_platform_data *pdata;
+        struct device_node *np = pdev->dev.of_node;
+        const struct of_device_id *of_id =
+                        of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+        if (!of_id)
+                return 0;
+        pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+        if (!pdata)
+                return -ENOMEM;
+        if (of_get_property(np, "marvell,nand-enable-arbiter", NULL))
+                pdata->enable_arbiter = 1;
+        if (of_get_property(np, "marvell,nand-keep-config", NULL))
+                pdata->keep_config = 1;
+        of_property_read_u32(np, "num-cs", &pdata->num_cs);
+        pdev->dev.platform_data = pdata;
+        return 0;
+}
+#else
+static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+        return 0;
+}
+#endif
 static int pxa3xx_nand_probe(struct platform_device *pdev)
 {
        struct pxa3xx_nand_platform_data *pdata;
+        struct mtd_part_parser_data ppdata = {};
        struct pxa3xx_nand_info *info;
        int ret, cs, probe_success;
+        ret = pxa3xx_nand_probe_dt(pdev);
+        if (ret)
+                return ret;
        pdata = pdev->dev.platform_data;
        if (!pdata) {
                dev_err(&pdev->dev, "no platform data defined\n");
@@ -1229,8 +1284,9 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
                        continue;
                }
+                ppdata.of_node = pdev->dev.of_node;
                ret = mtd_device_parse_register(info->host[cs]->mtd, NULL,
-                                                NULL, pdata->parts[cs],
+                                                &ppdata, pdata->parts[cs],
                                                pdata->nr_parts[cs]);
                if (!ret)
                        probe_success = 1;
@@ -1306,6 +1362,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev)
 static struct platform_driver pxa3xx_nand_driver = {
        .driver = {
                .name   = "pxa3xx-nand",
+                .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids),
        },
        .probe          = pxa3xx_nand_probe,
        .remove         = pxa3xx_nand_remove,
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index 7fca6ce5952b..304360cd213e 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -17,6 +17,7 @@
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -916,11 +917,66 @@ static void sirfsoc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s
        seq_printf(s, " " DRIVER_NAME);
 }
+static int sirfsoc_dt_node_to_map(struct pinctrl_dev *pctldev,
+                                 struct device_node *np_config,
+                                 struct pinctrl_map **map, unsigned *num_maps)
+{
+        struct sirfsoc_pmx *spmx = pinctrl_dev_get_drvdata(pctldev);
+        struct device_node *np;
+        struct property *prop;
+        const char *function, *group;
+        int ret, index = 0, count = 0;
+        /* calculate number of maps required */
+        for_each_child_of_node(np_config, np) {
+                ret = of_property_read_string(np, "sirf,function", &function);
+                if (ret < 0)
+                        return ret;
+                ret = of_property_count_strings(np, "sirf,pins");
+                if (ret < 0)
+                        return ret;
+                count += ret;
+        }
+        if (!count) {
+                dev_err(spmx->dev, "No child nodes passed via DT\n");
+                return -ENODEV;
+        }
+        *map = kzalloc(sizeof(**map) * count, GFP_KERNEL);
+        if (!*map)
+                return -ENOMEM;
+        for_each_child_of_node(np_config, np) {
+                of_property_read_string(np, "sirf,function", &function);
+                of_property_for_each_string(np, "sirf,pins", prop, group) {
+                        (*map)[index].type = PIN_MAP_TYPE_MUX_GROUP;
+                        (*map)[index].data.mux.group = group;
+                        (*map)[index].data.mux.function = function;
+                        index++;
+                }
+        }
+        *num_maps = count;
+        return 0;
+}
+static void sirfsoc_dt_free_map(struct pinctrl_dev *pctldev,
+                struct pinctrl_map *map, unsigned num_maps)
+{
+        kfree(map);
+}
 static struct pinctrl_ops sirfsoc_pctrl_ops = {
        .get_groups_count = sirfsoc_get_groups_count,
        .get_group_name = sirfsoc_get_group_name,
        .get_group_pins = sirfsoc_get_group_pins,
        .pin_dbg_show = sirfsoc_pin_dbg_show,
+        .dt_node_to_map = sirfsoc_dt_node_to_map,
+        .dt_free_map = sirfsoc_dt_free_map,
 };
 struct sirfsoc_pmx_func {
@@ -1221,7 +1277,7 @@ out_no_gpio_remap:
 }
 static const struct of_device_id pinmux_ids[] __devinitconst = {
-        { .compatible = "sirf,prima2-gpio-pinmux" },
+        { .compatible = "sirf,prima2-pinctrl" },
        {}
 };
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index 0075c8fd93d8..f771b2ee4b18 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -27,6 +27,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <mach/hardware.h>
@@ -396,6 +398,14 @@ static int __exit pxa_rtc_remove(struct platform_device *pdev)
        return 0;
 }
+#ifdef CONFIG_OF
+static struct of_device_id pxa_rtc_dt_ids[] = {
+        { .compatible = "marvell,pxa-rtc" },
+        {}
+};
+MODULE_DEVICE_TABLE(of, pxa_rtc_dt_ids);
+#endif
 #ifdef CONFIG_PM
 static int pxa_rtc_suspend(struct device *dev)
 {
@@ -425,6 +435,7 @@ static struct platform_driver pxa_rtc_driver = {
        .remove         = __exit_p(pxa_rtc_remove),
        .driver         = {
                .name   = "pxa-rtc",
+                .of_match_table = of_match_ptr(pxa_rtc_dt_ids),
 #ifdef CONFIG_PM
                .pm     = &pxa_rtc_pm_ops,
 #endif
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 77335fac943e..c12731582920 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -26,6 +26,7 @@
 #define CLK_IGNORE_UNUSED       BIT(3) /* do not gate even if unused */
 #define CLK_IS_ROOT             BIT(4) /* root clk, has no parent */
 #define CLK_IS_BASIC            BIT(5) /* Basic clk, can't do a to_clk_foo() */
+#define CLK_GET_RATE_NOCACHE    BIT(6) /* do not use the cached clk rate */
 struct clk_hw;
@@ -360,6 +361,11 @@ int of_clk_add_provider(struct device_node *np,
 void of_clk_del_provider(struct device_node *np);
 struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
                                  void *data);
+struct clk_onecell_data {
+        struct clk **clks;
+        unsigned int clk_num;
+};
+struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
 const char *of_clk_get_parent_name(struct device_node *np, int index);
 void of_clk_init(const struct of_device_id *matches);
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index 5b90e94399e1..c410d99bd667 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -136,6 +136,7 @@ enum prcmu_clock {
        PRCMU_TIMCLK,
        PRCMU_PLLSOC0,
        PRCMU_PLLSOC1,
+        PRCMU_ARMSS,
        PRCMU_PLLDDR,
        PRCMU_PLLDSI,
        PRCMU_DSI0CLK,
diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h
new file mode 100644
index 000000000000..2e426a7dbc51
--- /dev/null
+++ b/include/linux/platform_data/clk-realview.h
@@ -0,0 +1 @@
+void realview_clk_init(void __iomem *sysbase, bool is_pb1176);
diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h
new file mode 100644
index 000000000000..3af0da1f3be5
--- /dev/null
+++ b/include/linux/platform_data/clk-ux500.h
@@ -0,0 +1,17 @@
+/*
+ * Clock definitions for ux500 platforms
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __CLK_UX500_H
+#define __CLK_UX500_H
+void u8500_clk_init(void);
+void u9540_clk_init(void);
+void u8540_clk_init(void);
+#endif /* __CLK_UX500_H */