55 files changed, 358 insertions, 237 deletions

diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 15e45c84e371..59d2a3b137d9 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init apf9328_init(void)
 {
+        imx1_soc_init();
+
         mxc_gpio_setup_multiple_pins(apf9328_pins,
                         ARRAY_SIZE(apf9328_pins),
                         "APF9328");
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ffb40ff619b1..ede2710f8b76 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init armadillo5x0_init(void)
 {
+        imx31_soc_init();
+
         mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
                         ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 42e4f078a19c..f49470553bdf 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = {
 
 static void __init bug_board_init(void)
 {
+        imx31_soc_init();
+
         mxc_iomux_setup_multiple_pins(bug_pins,
                                       ARRAY_SIZE(bug_pins), "uart-4");
         imx31_add_imx_uart4(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 46a2e41d43d2..87887ac5806b 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode);
 
 static void __init eukrea_cpuimx27_init(void)
 {
+        imx27_soc_init();
+
         mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
                 ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
 
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 3f8ef825fa6f..f39a478ba1a6 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
  */
 static void __init eukrea_cpuimx35_init(void)
 {
+        imx35_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
                         ARRAY_SIZE(eukrea_cpuimx35_pads));
 
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 148cff2819b9..da36da52969d 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode);
 
 static void __init eukrea_cpuimx25_init(void)
 {
+        imx25_soc_init();
+
         if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
                         ARRAY_SIZE(eukrea_cpuimx25_pads)))
                 printk(KERN_ERR "error setting cpuimx25 pads !\n");
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 7ae43b1ec517..c6269d60ddbc 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void)
 {
         int ret;
 
+        imx27_soc_init();
+
         ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
                         ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
         if (ret)
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 9be6cd6fbf8c..272f793e9247 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = {
 
 static void __init mx27ipcam_init(void)
 {
+        imx27_soc_init();
+
         mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
                 "mx27ipcam");
 
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 841140516ede..d81a769fe895 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mx27lite_init(void)
 {
+        imx27_soc_init();
+
         mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
                 "imx27lite");
         imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 1ecae20cf4e3..e472a1d88058 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = {
  */
 static void __init kzm_board_init(void)
 {
+        imx31_soc_init();
+
         mxc_iomux_setup_multiple_pins(kzm_pins,
                                       ARRAY_SIZE(kzm_pins), "kzm");
         kzm_init_ext_uart();
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 38ec5cbbda9b..5cd8bee46960 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+        imx1_soc_init();
+
         mxc_gpio_setup_multiple_pins(mx1ads_pins,
                 ARRAY_SIZE(mx1ads_pins), "mx1ads");
 
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 74ac88978ddd..d389ecf9b5a8 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = {
 
 static void __init mx21ads_board_init(void)
 {
+        imx21_soc_init();
+
         mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
                         "mx21ads");
 
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 58ea3fdf0911..01534bb61305 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
 
 static void __init mx25pdk_init(void)
 {
+        imx25_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
                         ARRAY_SIZE(mx25pdk_pads));
 
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6e1accf93f81..117ce0a50f4e 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 
 static void __init mx27pdk_init(void)
 {
+        imx27_soc_init();
+
         mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
                 "mx27pdk");
         mx27_3ds_sdhc1_enable_level_translator();
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 1db79506f5e4..fc26ed71b9ed 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mx27ads_board_init(void)
 {
+        imx27_soc_init();
+
         mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
                         "mx27ads");
 
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 9b982449cb52..ab2a6268b50b 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -689,6 +689,8 @@ static void __init mx31_3ds_init(void)
 {
         int ret;
 
+        imx31_soc_init();
+
         mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
                                       "mx31_3ds");
 
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index f4dee0254634..0ce49478a479 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void)
 
 static void __init mx31ads_init(void)
 {
+        imx31_soc_init();
+
         mxc_init_extuart();
         mxc_init_imx_uart();
         mxc_init_i2c();
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 410e676ae087..750368ddf0f9 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
 
 static void __init mx31lilly_board_init(void)
 {
+        imx31_soc_init();
+
         switch (mx31lilly_baseboard) {
         case MX31LILLY_NOBOARD:
                 break;
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index ac9b4cad320e..4b47fd9fdd89 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -230,6 +230,8 @@ static void __init mx31lite_init(void)
 {
         int ret;
 
+        imx31_soc_init();
+
         switch (mx31lite_baseboard) {
         case MX31LITE_NOBOARD:
                 break;
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index eaa51e49ca95..a52fd36e2b52 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mx31moboard_init(void)
 {
+        imx31_soc_init();
+
         mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
                 "moboard");
 
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 882880ac1bbc..48b3c6fd5cf0 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
  */
 static void __init mx35_3ds_init(void)
 {
+        imx35_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
         imx35_add_fec(NULL);
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 2774541511e7..c85876fed663 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mxt_td60_board_init(void)
 {
+        imx27_soc_init();
+
         mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
                         "MXT_TD60");
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index bbddc5a11c43..71083aa16038 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -357,6 +357,8 @@ static void __init pca100_init(void)
 {
         int ret;
 
+        imx27_soc_init();
+
         /* SSI unit */
         mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
                                   MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 89c213b81295..f45b7cd72c8a 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -576,6 +576,8 @@ static void __init pcm037_init(void)
 {
         int ret;
 
+        imx31_soc_init();
+
         mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
         mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 853bb871c7ed..2d6a64bbac44 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 
 static void __init pcm038_init(void)
 {
+        imx27_soc_init();
+
         mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
                         "PCM038");
 
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 026441628dfa..163cc318cafb 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = {
  */
 static void __init pcm043_init(void)
 {
+        imx35_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
         mxc_audmux_v2_configure_port(3,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index c16328715939..3626f486498a 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -244,6 +244,8 @@ static void __init qong_init_fpga(void)
  */
 static void __init qong_init(void)
 {
+        imx31_soc_init();
+
         mxc_init_imx_uart();
         qong_init_nor_mtd();
         qong_init_fpga();
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index dcaee043628e..82805260e19c 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init scb9328_init(void)
 {
+        imx1_soc_init();
+
         imx1_add_imx_uart0(&uart_pdata);
 
         printk(KERN_INFO"Scb9328: Adding devices\n");
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index d74e3473d236..7d8e012a6335 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init vpr200_board_init(void)
 {
+        imx35_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
 
         imx35_add_fec(NULL);
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 2e482ba5a0e7..b486595701b7 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -23,7 +23,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -44,15 +43,15 @@ void __init imx1_init_early(void)
                         MX1_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx1_gpio_ports[] = {
-        DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
-};
-
 void __init mx1_init_irq(void)
 {
         mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-        mxc_gpio_init(imx1_gpio_ports,  ARRAY_SIZE(imx1_gpio_ports));
+}
+
+void __init imx1_soc_init(void)
+{
+        mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTA, 0);
+        mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTB, 0);
+        mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTC, 0);
+        mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_4K, MX1_GPIO_INT_PORTD, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 7a0c500ac2c8..f0fb8bcce6f9 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -24,7 +24,6 @@
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -70,17 +69,17 @@ void __init imx21_init_early(void)
                         MX21_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx21_gpio_ports[] = {
-        DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
-        DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
-        DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
-        DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
-        DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
-        DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
-};
-
 void __init mx21_init_irq(void)
 {
         mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-        mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
+
+void __init imx21_soc_init(void)
+{
+        mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+        mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+        mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+        mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+        mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
+        mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_4K, MX21_INT_GPIO, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 02f7b5c7fa8e..1b6d583f750a 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -27,7 +27,6 @@
 #include <mach/hardware.h>
 #include <mach/mx25.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -57,16 +56,15 @@ void __init imx25_init_early(void)
         mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx25_gpio_ports[] = {
-        DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
-};
-
 void __init mx25_init_irq(void)
 {
         mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-        mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports));
 }
 
+void __init imx25_soc_init(void)
+{
+        mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
+        mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
+        mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
+        mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index a6761a39f08c..d3700cec8ec5 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -24,7 +24,6 @@
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -70,17 +69,17 @@ void __init imx27_init_early(void)
                         MX27_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx27_gpio_ports[] = {
-        DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
-        DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
-        DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
-        DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
-        DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
-        DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
-};
-
 void __init mx27_init_irq(void)
 {
         mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-        mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+}
+
+void __init imx27_soc_init(void)
+{
+        mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+        mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+        mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+        mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+        mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
+        mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_4K, MX27_INT_GPIO, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
index 86b9b45864d2..cb16ac661776 100644
--- a/arch/arm/mach-imx/mm-imx31.c
+++ b/arch/arm/mach-imx/mm-imx31.c
@@ -26,7 +26,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 static struct map_desc mx31_io_desc[] __initdata = {
@@ -53,14 +52,14 @@ void __init imx31_init_early(void)
         mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx31_gpio_ports[] = {
-        DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
 void __init mx31_init_irq(void)
 {
         mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-        mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports));
+}
+
+void __init imx31_soc_init(void)
+{
+        mxc_register_gpio(0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+        mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+        mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
 }
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
index c880e6d1ae55..648bfca0163e 100644
--- a/arch/arm/mach-imx/mm-imx35.c
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -27,7 +27,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 static struct map_desc mx35_io_desc[] __initdata = {
@@ -50,14 +49,14 @@ void __init imx35_init_early(void)
         mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx35_gpio_ports[] = {
-        DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
-        DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
 void __init mx35_init_irq(void)
 {
         mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-        mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports));
+}
+
+void __init imx35_soc_init(void)
+{
+        mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+        mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+        mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 }
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 4efa02ee1639..add0d42de7af 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode);
  */
 static void __init eukrea_cpuimx51_init(void)
 {
+        imx51_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
                                         ARRAY_SIZE(eukrea_cpuimx51_pads));
 
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 5ef25a596143..ff096d587299 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = {
 
 static void __init eukrea_cpuimx51sd_init(void)
 {
+        imx51_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
                                         ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index 11210e1ae42a..7de25c6712eb 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = {
  */
 static void __init mx50_rdp_board_init(void)
 {
+        imx50_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
                                         ARRAY_SIZE(mx50_rdp_pads));
 
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 63dfbeafbc1e..3112d15feebc 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = {
  */
 static void __init mx51_3ds_init(void)
 {
+        imx51_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
                                         ARRAY_SIZE(mx51_3ds_pads));
 
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index c7b3fabf50f9..6021dd00ec75 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void)
         iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
                 MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
+        imx51_soc_init();
+
 #if defined(CONFIG_CPU_FREQ_IMX)
         get_cpu_op = mx51_get_cpu_op;
 #endif
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 6e362315291b..3be603b9075a 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init);
 
 static void __init mx51_efikamx_init(void)
 {
+        imx51_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
                                         ARRAY_SIZE(mx51efikamx_pads));
         efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 474fc6e4c6df..4b2e522de0f8 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void)
 
 static void __init efikasb_board_init(void)
 {
+        imx51_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
                                         ARRAY_SIZE(mx51efikasb_pads));
         efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index f87d571882c6..0d9218a6e2d2 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = {
 
 static void __init mx53_evk_board_init(void)
 {
+        imx53_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
                                         ARRAY_SIZE(mx53_evk_pads));
         mx53_evk_init_uart();
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 1b947e8c9c0c..359c3e248add 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
 
 static void __init mx53_loco_board_init(void)
 {
+        imx53_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
                                         ARRAY_SIZE(mx53_loco_pads));
         imx53_add_imx_uart(0, NULL);
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 817c08938f55..bc02894eafef 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 
 static void __init mx53_smd_board_init(void)
 {
+        imx53_soc_init();
+
         mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
                                         ARRAY_SIZE(mx53_smd_pads));
         mx53_smd_init_uart();
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 153ada53e575..371ca8c8414c 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -12,7 +12,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
@@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = {
                 .coherent_dma_mask = DMA_BIT_MASK(32),
         },
 };
-
-static struct mxc_gpio_port mxc_gpio_ports[] = {
-        {
-                .chip.label = "gpio-0",
-                .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
-                .irq = MX51_MXC_INT_GPIO1_LOW,
-                .irq_high = MX51_MXC_INT_GPIO1_HIGH,
-                .virtual_irq_start = MXC_GPIO_IRQ_START
-        },
-        {
-                .chip.label = "gpio-1",
-                .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
-                .irq = MX51_MXC_INT_GPIO2_LOW,
-                .irq_high = MX51_MXC_INT_GPIO2_HIGH,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
-        },
-        {
-                .chip.label = "gpio-2",
-                .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
-                .irq = MX51_MXC_INT_GPIO3_LOW,
-                .irq_high = MX51_MXC_INT_GPIO3_HIGH,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
-        },
-        {
-                .chip.label = "gpio-3",
-                .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
-                .irq = MX51_MXC_INT_GPIO4_LOW,
-                .irq_high = MX51_MXC_INT_GPIO4_HIGH,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
-        },
-        {
-                .chip.label = "gpio-4",
-                .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
-                .irq = MX53_INT_GPIO5_LOW,
-                .irq_high = MX53_INT_GPIO5_HIGH,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
-        },
-        {
-                .chip.label = "gpio-5",
-                .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
-                .irq = MX53_INT_GPIO6_LOW,
-                .irq_high = MX53_INT_GPIO6_HIGH,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
-        },
-        {
-                .chip.label = "gpio-6",
-                .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
-                .irq = MX53_INT_GPIO7_LOW,
-                .irq_high = MX53_INT_GPIO7_HIGH,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
-        },
-};
-
-int __init imx51_register_gpios(void)
-{
-        return mxc_gpio_init(mxc_gpio_ports, 4);
-}
-
-int __init imx53_register_gpios(void)
-{
-        return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
index b9c363b514a9..28c3f60f734f 100644
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ b/arch/arm/mach-mx5/mm-mx50.c
@@ -26,7 +26,6 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -56,17 +55,17 @@ void __init imx50_init_early(void)
         mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx50_gpio_ports[] = {
-        DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
-        DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
-        DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-        DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-        DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-        DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-};
-
 void __init mx50_init_irq(void)
 {
         tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-        mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports));
+}
+
+void __init imx50_soc_init(void)
+{
+        mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+        mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+        mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+        mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+        mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+        mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
 }
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index ff557301b42b..800bb8b21081 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -69,8 +69,6 @@ void __init imx53_init_early(void)
         mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-int imx51_register_gpios(void);
-
 void __init mx51_init_irq(void)
 {
         unsigned long tzic_addr;
@@ -86,11 +84,8 @@ void __init mx51_init_irq(void)
                 panic("unable to map TZIC interrupt controller\n");
 
         tzic_init_irq(tzic_virt);
-        imx51_register_gpios();
 }
 
-int imx53_register_gpios(void);
-
 void __init mx53_init_irq(void)
 {
         unsigned long tzic_addr;
@@ -103,5 +98,23 @@ void __init mx53_init_irq(void)
                 panic("unable to map TZIC interrupt controller\n");
 
         tzic_init_irq(tzic_virt);
-        imx53_register_gpios();
+}
+
+void __init imx51_soc_init(void)
+{
+        mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
+        mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
+        mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
+        mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+}
+
+void __init imx53_soc_init(void)
+{
+        mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+        mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+        mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+        mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+        mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+        mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+        mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
 }
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index eee1b6096a08..fb166b20f60f 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -89,3 +89,14 @@ err:
 
         return pdev;
 }
+
+struct device mxc_aips_bus = {
+        .init_name      = "mxc_aips",
+        .parent         = &platform_bus,
+};
+
+static int __init mxc_device_init(void)
+{
+        return device_register(&mxc_aips_bus);
+}
+core_initcall(mxc_device_init);
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index ad2922acf480..b41bf972b54b 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-y += platform-gpio-mxc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
new file mode 100644
index 000000000000..cf1b7fdfa20d
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxc_register_gpio(int id,
+        resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
+{
+        struct resource res[] = {
+                {
+                        .start = iobase,
+                        .end = iobase + iosize - 1,
+                        .flags = IORESOURCE_MEM,
+                }, {
+                        .start = irq,
+                        .end = irq,
+                        .flags = IORESOURCE_IRQ,
+                }, {
+                        .start = irq_high,
+                        .end = irq_high,
+                        .flags = IORESOURCE_IRQ,
+                },
+        };
+
+        return platform_device_register_resndata(&mxc_aips_bus,
+                        "gpio-mxc", id, res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index da7991832af6..91fa2632aa5e 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -43,6 +43,15 @@ extern void mx35_init_irq(void);
 extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
+extern void imx1_soc_init(void);
+extern void imx21_soc_init(void);
+extern void imx25_soc_init(void);
+extern void imx27_soc_init(void);
+extern void imx31_soc_init(void);
+extern void imx35_soc_init(void);
+extern void imx50_soc_init(void);
+extern void imx51_soc_init(void);
+extern void imx53_soc_init(void);
 extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
                         unsigned long ckih1, unsigned long ckih2);
 extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
                         unsigned long ckih1, unsigned long ckih2);
-extern int mxc_register_gpios(void);
+extern struct platform_device *mxc_register_gpio(int id,
+        resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index fa8477337f91..03f626645374 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -10,6 +10,8 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 
+extern struct device mxc_aips_bus;
+
 struct platform_device *imx_add_platform_device_dmamask(
                 const char *name, int id,
                 const struct resource *res, unsigned int num_resources,
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index a2747f12813e..31c820c1b796 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -36,31 +36,4 @@
 #define gpio_to_irq(gpio)       (MXC_GPIO_IRQ_START + (gpio))
 #define irq_to_gpio(irq)        ((irq) - MXC_GPIO_IRQ_START)
 
-struct mxc_gpio_port {
-        void __iomem *base;
-        int irq;
-        int irq_high;
-        int virtual_irq_start;
-        struct gpio_chip chip;
-        u32 both_edges;
-        spinlock_t lock;
-};
-
-#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \
-        {                                                               \
-                .chip.label = "gpio-" #_id,                             \
-                .irq = _irq,                                            \
-                .irq_high = _irq_high,                                  \
-                .base = soc ## _IO_ADDRESS(                             \
-                                soc ## _GPIO ## _hwid ## _BASE_ADDR),   \
-                .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32,   \
-        }
-
-#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq)                 \
-        DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
-#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid)                           \
-        DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
 #endif
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 6cd6d7f686f6..844079a83f25 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -24,11 +24,28 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <mach/hardware.h>
 #include <asm-generic/bug.h>
 
-static struct mxc_gpio_port *mxc_gpio_ports;
-static int gpio_table_size;
+struct mxc_gpio_port {
+        struct list_head node;
+        void __iomem *base;
+        int irq;
+        int irq_high;
+        int virtual_irq_start;
+        struct gpio_chip chip;
+        u32 both_edges;
+        spinlock_t lock;
+};
+
+/*
+ * MX2 has one interrupt *for all* gpio ports. The list is used
+ * to save the references to all ports, so that mx2_gpio_irq_handler
+ * can walk through all interrupt status registers.
+ */
+static LIST_HEAD(mxc_gpio_ports);
 
 #define cpu_is_mx1_mx2()        (cpu_is_mx1() || cpu_is_mx2())
 
@@ -50,7 +67,7 @@ static int gpio_table_size;
 
 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
 {
-        __raw_writel(1 << index, port->base + GPIO_ISR);
+        writel(1 << index, port->base + GPIO_ISR);
 }
 
 static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
@@ -58,27 +75,30 @@ static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
 {
         u32 l;
 
-        l = __raw_readl(port->base + GPIO_IMR);
+        l = readl(port->base + GPIO_IMR);
         l = (l & (~(1 << index))) | (!!enable << index);
-        __raw_writel(l, port->base + GPIO_IMR);
+        writel(l, port->base + GPIO_IMR);
 }
 
 static void gpio_ack_irq(struct irq_data *d)
 {
+        struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
         u32 gpio = irq_to_gpio(d->irq);
-        _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
+        _clear_gpio_irqstatus(port, gpio & 0x1f);
 }
 
 static void gpio_mask_irq(struct irq_data *d)
 {
+        struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
         u32 gpio = irq_to_gpio(d->irq);
-        _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+        _set_gpio_irqenable(port, gpio & 0x1f, 0);
 }
 
 static void gpio_unmask_irq(struct irq_data *d)
 {
+        struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
         u32 gpio = irq_to_gpio(d->irq);
-        _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+        _set_gpio_irqenable(port, gpio & 0x1f, 1);
 }
 
 static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
@@ -86,7 +106,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
 static int gpio_set_irq_type(struct irq_data *d, u32 type)
 {
         u32 gpio = irq_to_gpio(d->irq);
-        struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+        struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
         u32 bit, val;
         int edge;
         void __iomem *reg = port->base;
@@ -122,8 +142,8 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 
         reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
         bit = gpio & 0xf;
-        val = __raw_readl(reg) & ~(0x3 << (bit << 1));
-        __raw_writel(val | (edge << (bit << 1)), reg);
+        val = readl(reg) & ~(0x3 << (bit << 1));
+        writel(val | (edge << (bit << 1)), reg);
         _clear_gpio_irqstatus(port, gpio & 0x1f);
 
         return 0;
@@ -137,7 +157,7 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 
         reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
         bit = gpio & 0xf;
-        val = __raw_readl(reg);
+        val = readl(reg);
         edge = (val >> (bit << 1)) & 3;
         val &= ~(0x3 << (bit << 1));
         if (edge == GPIO_INT_HIGH_LEV) {
@@ -151,7 +171,7 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
                        gpio, edge);
                 return;
         }
-        __raw_writel(val | (edge << (bit << 1)), reg);
+        writel(val | (edge << (bit << 1)), reg);
 }
 
 /* handle 32 interrupts in one status register */
@@ -177,8 +197,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
         u32 irq_stat;
         struct mxc_gpio_port *port = irq_get_handler_data(irq);
 
-        irq_stat = __raw_readl(port->base + GPIO_ISR) &
-                        __raw_readl(port->base + GPIO_IMR);
+        irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
 
         mxc_gpio_irq_handler(port, irq_stat);
 }
@@ -186,19 +205,18 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 /* MX2 has one interrupt *for all* gpio ports */
 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
-        int i;
         u32 irq_msk, irq_stat;
-        struct mxc_gpio_port *port = irq_get_handler_data(irq);
+        struct mxc_gpio_port *port;
 
         /* walk through all interrupt status registers */
-        for (i = 0; i < gpio_table_size; i++) {
-                irq_msk = __raw_readl(port[i].base + GPIO_IMR);
+        list_for_each_entry(port, &mxc_gpio_ports, node) {
+                irq_msk = readl(port->base + GPIO_IMR);
                 if (!irq_msk)
                         continue;
 
-                irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
+                irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
                 if (irq_stat)
-                        mxc_gpio_irq_handler(&port[i], irq_stat);
+                        mxc_gpio_irq_handler(port, irq_stat);
         }
 }
 
@@ -215,7 +233,7 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
 {
         u32 gpio = irq_to_gpio(d->irq);
         u32 gpio_idx = gpio & 0x1F;
-        struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+        struct mxc_gpio_port *port = irq_data_get_irq_chip_data(d);
 
         if (enable) {
                 if (port->irq_high && (gpio_idx >= 16))
@@ -250,12 +268,12 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
         unsigned long flags;
 
         spin_lock_irqsave(&port->lock, flags);
-        l = __raw_readl(port->base + GPIO_GDIR);
+        l = readl(port->base + GPIO_GDIR);
         if (dir)
                 l |= 1 << offset;
         else
                 l &= ~(1 << offset);
-        __raw_writel(l, port->base + GPIO_GDIR);
+        writel(l, port->base + GPIO_GDIR);
         spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -268,8 +286,8 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
         unsigned long flags;
 
         spin_lock_irqsave(&port->lock, flags);
-        l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
-        __raw_writel(l, reg);
+        l = (readl(reg) & (~(1 << offset))) | (!!value << offset);
+        writel(l, reg);
         spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -278,7 +296,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
         struct mxc_gpio_port *port =
                 container_of(chip, struct mxc_gpio_port, chip);
 
-        return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
+        return (readl(port->base + GPIO_PSR) >> offset) & 1;
 }
 
 static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -301,61 +319,116 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
  */
 static struct lock_class_key gpio_lock_class;
 
-int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
+static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 {
-        int i, j;
-
-        /* save for local usage */
-        mxc_gpio_ports = port;
-        gpio_table_size = cnt;
-
-        printk(KERN_INFO "MXC GPIO hardware\n");
-
-        for (i = 0; i < cnt; i++) {
-                /* disable the interrupt and clear the status */
-                __raw_writel(0, port[i].base + GPIO_IMR);
-                __raw_writel(~0, port[i].base + GPIO_ISR);
-                for (j = port[i].virtual_irq_start;
-                        j < port[i].virtual_irq_start + 32; j++) {
-                        irq_set_lockdep_class(j, &gpio_lock_class);
-                        irq_set_chip_and_handler(j, &gpio_irq_chip,
-                                                 handle_level_irq);
-                        set_irq_flags(j, IRQF_VALID);
-                }
+        struct mxc_gpio_port *port;
+        struct resource *iores;
+        int err, i;
+
+        port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
+        if (!port)
+                return -ENOMEM;
 
-                /* register gpio chip */
-                port[i].chip.direction_input = mxc_gpio_direction_input;
-                port[i].chip.direction_output = mxc_gpio_direction_output;
-                port[i].chip.get = mxc_gpio_get;
-                port[i].chip.set = mxc_gpio_set;
-                port[i].chip.base = i * 32;
-                port[i].chip.ngpio = 32;
+        port->virtual_irq_start = MXC_GPIO_IRQ_START + pdev->id * 32;
 
-                spin_lock_init(&port[i].lock);
+        iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!iores) {
+                err = -ENODEV;
+                goto out_kfree;
+        }
 
-                /* its a serious configuration bug when it fails */
-                BUG_ON( gpiochip_add(&port[i].chip) < 0 );
+        if (!request_mem_region(iores->start, resource_size(iores),
+                                pdev->name)) {
+                err = -EBUSY;
+                goto out_kfree;
+        }
 
-                if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
-                        /* setup one handler for each entry */
-                        irq_set_chained_handler(port[i].irq,
-                                                mx3_gpio_irq_handler);
-                        irq_set_handler_data(port[i].irq, &port[i]);
-                        if (port[i].irq_high) {
-                                /* setup handler for GPIO 16 to 31 */
-                                irq_set_chained_handler(port[i].irq_high,
-                                                        mx3_gpio_irq_handler);
-                                irq_set_handler_data(port[i].irq_high,
-                                                     &port[i]);
-                        }
-                }
+        port->base = ioremap(iores->start, resource_size(iores));
+        if (!port->base) {
+                err = -ENOMEM;
+                goto out_release_mem;
+        }
+
+        port->irq_high = platform_get_irq(pdev, 1);
+        port->irq = platform_get_irq(pdev, 0);
+        if (port->irq < 0) {
+                err = -EINVAL;
+                goto out_iounmap;
+        }
+
+        /* disable the interrupt and clear the status */
+        writel(0, port->base + GPIO_IMR);
+        writel(~0, port->base + GPIO_ISR);
+
+        for (i = port->virtual_irq_start;
+                i < port->virtual_irq_start + 32; i++) {
+                irq_set_lockdep_class(i, &gpio_lock_class);
+                irq_set_chip_and_handler(i, &gpio_irq_chip, handle_level_irq);
+                set_irq_flags(i, IRQF_VALID);
+                irq_set_chip_data(i, port);
         }
 
         if (cpu_is_mx2()) {
                 /* setup one handler for all GPIO interrupts */
-                irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-                irq_set_handler_data(port[0].irq, port);
+                if (pdev->id == 0)
+                        irq_set_chained_handler(port->irq,
+                                                mx2_gpio_irq_handler);
+        } else {
+                /* setup one handler for each entry */
+                irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
+                irq_set_handler_data(port->irq, port);
+                if (port->irq_high > 0) {
+                        /* setup handler for GPIO 16 to 31 */
+                        irq_set_chained_handler(port->irq_high,
+                                                mx3_gpio_irq_handler);
+                        irq_set_handler_data(port->irq_high, port);
+                }
         }
 
+        /* register gpio chip */
+        port->chip.direction_input = mxc_gpio_direction_input;
+        port->chip.direction_output = mxc_gpio_direction_output;
+        port->chip.get = mxc_gpio_get;
+        port->chip.set = mxc_gpio_set;
+        port->chip.base = pdev->id * 32;
+        port->chip.ngpio = 32;
+
+        spin_lock_init(&port->lock);
+
+        err = gpiochip_add(&port->chip);
+        if (err)
+                goto out_iounmap;
+
+        list_add_tail(&port->node, &mxc_gpio_ports);
+
         return 0;
+
+out_iounmap:
+        iounmap(port->base);
+out_release_mem:
+        release_mem_region(iores->start, resource_size(iores));
+out_kfree:
+        kfree(port);
+        dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
+        return err;
 }
+
+static struct platform_driver mxc_gpio_driver = {
+        .driver         = {
+                .name   = "gpio-mxc",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = mxc_gpio_probe,
+};
+
+static int __init gpio_mxc_init(void)
+{
+        return platform_driver_register(&mxc_gpio_driver);
+}
+postcore_initcall(gpio_mxc_init);
+
+MODULE_AUTHOR("Freescale Semiconductor, "
+              "Daniel Mack <danielncaiaq.de>, "
+              "Juergen Beisert <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale MXC GPIO");
+MODULE_LICENSE("GPL");