diff options
-rw-r--r-- | drivers/watchdog/Kconfig | 12 | ||||
-rw-r--r-- | drivers/watchdog/Makefile | 1 | ||||
-rw-r--r-- | drivers/watchdog/it87_wdt.c | 725 |
3 files changed, 738 insertions, 0 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index c51036716700..82e65154e75c 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig | |||
@@ -416,6 +416,18 @@ config IT8712F_WDT | |||
416 | To compile this driver as a module, choose M here: the | 416 | To compile this driver as a module, choose M here: the |
417 | module will be called it8712f_wdt. | 417 | module will be called it8712f_wdt. |
418 | 418 | ||
419 | config IT87_WDT | ||
420 | tristate "IT87 Watchdog Timer" | ||
421 | depends on X86 && EXPERIMENTAL | ||
422 | ---help--- | ||
423 | This is the driver for the hardware watchdog on the ITE IT8716, | ||
424 | IT8718, IT8726, IT8712(Version J,K) Super I/O chips. This watchdog | ||
425 | simply watches your kernel to make sure it doesn't freeze, and if | ||
426 | it does, it reboots your computer after a certain amount of time. | ||
427 | |||
428 | To compile this driver as a module, choose M here: the module will | ||
429 | be called it87_wdt. | ||
430 | |||
419 | config HP_WATCHDOG | 431 | config HP_WATCHDOG |
420 | tristate "HP Proliant iLO 2 Hardware Watchdog Timer" | 432 | tristate "HP Proliant iLO 2 Hardware Watchdog Timer" |
421 | depends on X86 | 433 | depends on X86 |
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index e0ef123fbdea..e2e4bcf0a56e 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile | |||
@@ -71,6 +71,7 @@ ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y) | |||
71 | obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o | 71 | obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o |
72 | endif | 72 | endif |
73 | obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o | 73 | obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o |
74 | obj-$(CONFIG_IT87_WDT) += it87_wdt.o | ||
74 | obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o | 75 | obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o |
75 | obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o | 76 | obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o |
76 | obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o | 77 | obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o |
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c new file mode 100644 index 000000000000..afb8af397a9f --- /dev/null +++ b/drivers/watchdog/it87_wdt.c | |||
@@ -0,0 +1,725 @@ | |||
1 | /* | ||
2 | * Watchdog Timer Driver | ||
3 | * for ITE IT87xx Environment Control - Low Pin Count Input / Output | ||
4 | * | ||
5 | * (c) Copyright 2007 Oliver Schuster <olivers137@aol.com> | ||
6 | * | ||
7 | * Based on softdog.c by Alan Cox, | ||
8 | * 83977f_wdt.c by Jose Goncalves, | ||
9 | * it87.c by Chris Gauthron, Jean Delvare | ||
10 | * | ||
11 | * Data-sheets: Publicly available at the ITE website | ||
12 | * http://www.ite.com.tw/ | ||
13 | * | ||
14 | * Support of the watchdog timers, which are available on | ||
15 | * IT8716, IT8718, IT8726 and IT8712 (J,K version). | ||
16 | * | ||
17 | * This program is free software; you can redistribute it and/or | ||
18 | * modify it under the terms of the GNU General Public License | ||
19 | * as published by the Free Software Foundation; either version | ||
20 | * 2 of the License, or (at your option) any later version. | ||
21 | * | ||
22 | * This program is distributed in the hope that it will be useful, | ||
23 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
24 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
25 | * GNU General Public License for more details. | ||
26 | * | ||
27 | * You should have received a copy of the GNU General Public License | ||
28 | * along with this program; if not, write to the Free Software | ||
29 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | ||
30 | */ | ||
31 | |||
32 | #include <linux/module.h> | ||
33 | #include <linux/moduleparam.h> | ||
34 | #include <linux/types.h> | ||
35 | #include <linux/kernel.h> | ||
36 | #include <linux/fs.h> | ||
37 | #include <linux/miscdevice.h> | ||
38 | #include <linux/init.h> | ||
39 | #include <linux/ioport.h> | ||
40 | #include <linux/watchdog.h> | ||
41 | #include <linux/notifier.h> | ||
42 | #include <linux/reboot.h> | ||
43 | #include <linux/uaccess.h> | ||
44 | #include <linux/io.h> | ||
45 | |||
46 | #include <asm/system.h> | ||
47 | |||
48 | #define WATCHDOG_VERSION "1.12" | ||
49 | #define WATCHDOG_NAME "IT87 WDT" | ||
50 | #define PFX WATCHDOG_NAME ": " | ||
51 | #define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" | ||
52 | #define WD_MAGIC 'V' | ||
53 | |||
54 | /* Defaults for Module Parameter */ | ||
55 | #define DEFAULT_NOGAMEPORT 0 | ||
56 | #define DEFAULT_EXCLUSIVE 1 | ||
57 | #define DEFAULT_TIMEOUT 60 | ||
58 | #define DEFAULT_TESTMODE 0 | ||
59 | #define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT | ||
60 | |||
61 | /* IO Ports */ | ||
62 | #define REG 0x2e | ||
63 | #define VAL 0x2f | ||
64 | |||
65 | /* Logical device Numbers LDN */ | ||
66 | #define GPIO 0x07 | ||
67 | #define GAMEPORT 0x09 | ||
68 | #define CIR 0x0a | ||
69 | |||
70 | /* Configuration Registers and Functions */ | ||
71 | #define LDNREG 0x07 | ||
72 | #define CHIPID 0x20 | ||
73 | #define CHIPREV 0x22 | ||
74 | #define ACTREG 0x30 | ||
75 | #define BASEREG 0x60 | ||
76 | |||
77 | /* Chip Id numbers */ | ||
78 | #define NO_DEV_ID 0xffff | ||
79 | #define IT8705_ID 0x8705 | ||
80 | #define IT8712_ID 0x8712 | ||
81 | #define IT8716_ID 0x8716 | ||
82 | #define IT8718_ID 0x8718 | ||
83 | #define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */ | ||
84 | |||
85 | /* GPIO Configuration Registers LDN=0x07 */ | ||
86 | #define WDTCTRL 0x71 | ||
87 | #define WDTCFG 0x72 | ||
88 | #define WDTVALLSB 0x73 | ||
89 | #define WDTVALMSB 0x74 | ||
90 | |||
91 | /* GPIO Bits WDTCTRL */ | ||
92 | #define WDT_CIRINT 0x80 | ||
93 | #define WDT_MOUSEINT 0x40 | ||
94 | #define WDT_KYBINT 0x20 | ||
95 | #define WDT_GAMEPORT 0x10 /* not it8718 */ | ||
96 | #define WDT_FORCE 0x02 | ||
97 | #define WDT_ZERO 0x01 | ||
98 | |||
99 | /* GPIO Bits WDTCFG */ | ||
100 | #define WDT_TOV1 0x80 | ||
101 | #define WDT_KRST 0x40 | ||
102 | #define WDT_TOVE 0x20 | ||
103 | #define WDT_PWROK 0x10 | ||
104 | #define WDT_INT_MASK 0x0f | ||
105 | |||
106 | /* CIR Configuration Register LDN=0x0a */ | ||
107 | #define CIR_ILS 0x70 | ||
108 | |||
109 | /* The default Base address is not always available, we use this */ | ||
110 | #define CIR_BASE 0x0208 | ||
111 | |||
112 | /* CIR Controller */ | ||
113 | #define CIR_DR(b) (b) | ||
114 | #define CIR_IER(b) (b + 1) | ||
115 | #define CIR_RCR(b) (b + 2) | ||
116 | #define CIR_TCR1(b) (b + 3) | ||
117 | #define CIR_TCR2(b) (b + 4) | ||
118 | #define CIR_TSR(b) (b + 5) | ||
119 | #define CIR_RSR(b) (b + 6) | ||
120 | #define CIR_BDLR(b) (b + 5) | ||
121 | #define CIR_BDHR(b) (b + 6) | ||
122 | #define CIR_IIR(b) (b + 7) | ||
123 | |||
124 | /* Default Base address of Game port */ | ||
125 | #define GP_BASE_DEFAULT 0x0201 | ||
126 | |||
127 | /* wdt_status */ | ||
128 | #define WDTS_TIMER_RUN 0 | ||
129 | #define WDTS_DEV_OPEN 1 | ||
130 | #define WDTS_KEEPALIVE 2 | ||
131 | #define WDTS_LOCKED 3 | ||
132 | #define WDTS_USE_GP 4 | ||
133 | #define WDTS_EXPECTED 5 | ||
134 | |||
135 | static unsigned int base, gpact, ciract; | ||
136 | static unsigned long wdt_status; | ||
137 | static DEFINE_SPINLOCK(spinlock); | ||
138 | |||
139 | static int nogameport = DEFAULT_NOGAMEPORT; | ||
140 | static int exclusive = DEFAULT_EXCLUSIVE; | ||
141 | static int timeout = DEFAULT_TIMEOUT; | ||
142 | static int testmode = DEFAULT_TESTMODE; | ||
143 | static int nowayout = DEFAULT_NOWAYOUT; | ||
144 | |||
145 | module_param(nogameport, int, 0); | ||
146 | MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default=" | ||
147 | __MODULE_STRING(DEFAULT_NOGAMEPORT)); | ||
148 | module_param(exclusive, int, 0); | ||
149 | MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default=" | ||
150 | __MODULE_STRING(DEFAULT_EXCLUSIVE)); | ||
151 | module_param(timeout, int, 0); | ||
152 | MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" | ||
153 | __MODULE_STRING(DEFAULT_TIMEOUT)); | ||
154 | module_param(testmode, int, 0); | ||
155 | MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" | ||
156 | __MODULE_STRING(DEFAULT_TESTMODE)); | ||
157 | module_param(nowayout, int, 0); | ||
158 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" | ||
159 | __MODULE_STRING(WATCHDOG_NOWAYOUT)); | ||
160 | |||
161 | /* Superio Chip */ | ||
162 | |||
163 | static inline void superio_enter(void) | ||
164 | { | ||
165 | outb(0x87, REG); | ||
166 | outb(0x01, REG); | ||
167 | outb(0x55, REG); | ||
168 | outb(0x55, REG); | ||
169 | } | ||
170 | |||
171 | static inline void superio_exit(void) | ||
172 | { | ||
173 | outb(0x02, REG); | ||
174 | outb(0x02, VAL); | ||
175 | } | ||
176 | |||
177 | static inline void superio_select(int ldn) | ||
178 | { | ||
179 | outb(LDNREG, REG); | ||
180 | outb(ldn, VAL); | ||
181 | } | ||
182 | |||
183 | static inline int superio_inb(int reg) | ||
184 | { | ||
185 | outb(reg, REG); | ||
186 | return inb(VAL); | ||
187 | } | ||
188 | |||
189 | static inline void superio_outb(int val, int reg) | ||
190 | { | ||
191 | outb(reg, REG); | ||
192 | outb(val, VAL); | ||
193 | } | ||
194 | |||
195 | static inline int superio_inw(int reg) | ||
196 | { | ||
197 | int val; | ||
198 | outb(reg++, REG); | ||
199 | val = inb(VAL) << 8; | ||
200 | outb(reg, REG); | ||
201 | val |= inb(VAL); | ||
202 | return val; | ||
203 | } | ||
204 | |||
205 | static inline void superio_outw(int val, int reg) | ||
206 | { | ||
207 | outb(reg++, REG); | ||
208 | outb(val >> 8, VAL); | ||
209 | outb(reg, REG); | ||
210 | outb(val, VAL); | ||
211 | } | ||
212 | |||
213 | /* watchdog timer handling */ | ||
214 | |||
215 | static void wdt_keepalive(void) | ||
216 | { | ||
217 | if (test_bit(WDTS_USE_GP, &wdt_status)) | ||
218 | inb(base); | ||
219 | else | ||
220 | /* The timer reloads with around 5 msec delay */ | ||
221 | outb(0x55, CIR_DR(base)); | ||
222 | set_bit(WDTS_KEEPALIVE, &wdt_status); | ||
223 | } | ||
224 | |||
225 | static void wdt_start(void) | ||
226 | { | ||
227 | unsigned long flags; | ||
228 | |||
229 | spin_lock_irqsave(&spinlock, flags); | ||
230 | superio_enter(); | ||
231 | |||
232 | superio_select(GPIO); | ||
233 | if (test_bit(WDTS_USE_GP, &wdt_status)) | ||
234 | superio_outb(WDT_GAMEPORT, WDTCTRL); | ||
235 | else | ||
236 | superio_outb(WDT_CIRINT, WDTCTRL); | ||
237 | if (!testmode) | ||
238 | superio_outb(WDT_TOV1 | WDT_KRST | WDT_PWROK, WDTCFG); | ||
239 | else | ||
240 | superio_outb(WDT_TOV1, WDTCFG); | ||
241 | superio_outb(timeout>>8, WDTVALMSB); | ||
242 | superio_outb(timeout, WDTVALLSB); | ||
243 | |||
244 | superio_exit(); | ||
245 | spin_unlock_irqrestore(&spinlock, flags); | ||
246 | } | ||
247 | |||
248 | static void wdt_stop(void) | ||
249 | { | ||
250 | unsigned long flags; | ||
251 | |||
252 | spin_lock_irqsave(&spinlock, flags); | ||
253 | superio_enter(); | ||
254 | |||
255 | superio_select(GPIO); | ||
256 | superio_outb(0x00, WDTCTRL); | ||
257 | superio_outb(WDT_TOV1, WDTCFG); | ||
258 | superio_outb(0x00, WDTVALMSB); | ||
259 | superio_outb(0x00, WDTVALLSB); | ||
260 | |||
261 | superio_exit(); | ||
262 | spin_unlock_irqrestore(&spinlock, flags); | ||
263 | } | ||
264 | |||
265 | /** | ||
266 | * wdt_set_timeout - set a new timeout value with watchdog ioctl | ||
267 | * @t: timeout value in seconds | ||
268 | * | ||
269 | * The hardware device has a 16 bit watchdog timer, thus the | ||
270 | * timeout time ranges between 1 and 65535 seconds. | ||
271 | * | ||
272 | * Used within WDIOC_SETTIMEOUT watchdog device ioctl. | ||
273 | */ | ||
274 | |||
275 | static int wdt_set_timeout(int t) | ||
276 | { | ||
277 | unsigned long flags; | ||
278 | |||
279 | if (t < 1 || t > 65535) | ||
280 | return -EINVAL; | ||
281 | |||
282 | timeout = t; | ||
283 | |||
284 | spin_lock_irqsave(&spinlock, flags); | ||
285 | if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | ||
286 | superio_enter(); | ||
287 | |||
288 | superio_select(GPIO); | ||
289 | superio_outb(t>>8, WDTVALMSB); | ||
290 | superio_outb(t, WDTVALLSB); | ||
291 | |||
292 | superio_exit(); | ||
293 | } | ||
294 | spin_unlock_irqrestore(&spinlock, flags); | ||
295 | return 0; | ||
296 | } | ||
297 | |||
298 | /** | ||
299 | * wdt_get_status - determines the status supported by watchdog ioctl | ||
300 | * @status: status returned to user space | ||
301 | * | ||
302 | * The status bit of the device does not allow to distinguish | ||
303 | * between a regular system reset and a watchdog forced reset. | ||
304 | * But, in test mode it is useful, so it is supported through | ||
305 | * WDIOC_GETSTATUS watchdog ioctl. Additionally the driver | ||
306 | * reports the keepalive signal and the acception of the magic. | ||
307 | * | ||
308 | * Used within WDIOC_GETSTATUS watchdog device ioctl. | ||
309 | */ | ||
310 | |||
311 | static int wdt_get_status(int *status) | ||
312 | { | ||
313 | unsigned long flags; | ||
314 | |||
315 | *status = 0; | ||
316 | if (testmode) { | ||
317 | spin_lock_irqsave(&spinlock, flags); | ||
318 | superio_enter(); | ||
319 | superio_select(GPIO); | ||
320 | if (superio_inb(WDTCTRL) & WDT_ZERO) { | ||
321 | superio_outb(0x00, WDTCTRL); | ||
322 | clear_bit(WDTS_TIMER_RUN, &wdt_status); | ||
323 | *status |= WDIOF_CARDRESET; | ||
324 | } | ||
325 | |||
326 | superio_exit(); | ||
327 | spin_unlock_irqrestore(&spinlock, flags); | ||
328 | } | ||
329 | if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status)) | ||
330 | *status |= WDIOF_KEEPALIVEPING; | ||
331 | if (test_bit(WDTS_EXPECTED, &wdt_status)) | ||
332 | *status |= WDIOF_MAGICCLOSE; | ||
333 | return 0; | ||
334 | } | ||
335 | |||
336 | /* /dev/watchdog handling */ | ||
337 | |||
338 | /** | ||
339 | * wdt_open - watchdog file_operations .open | ||
340 | * @inode: inode of the device | ||
341 | * @file: file handle to the device | ||
342 | * | ||
343 | * The watchdog timer starts by opening the device. | ||
344 | * | ||
345 | * Used within the file operation of the watchdog device. | ||
346 | */ | ||
347 | |||
348 | static int wdt_open(struct inode *inode, struct file *file) | ||
349 | { | ||
350 | if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status)) | ||
351 | return -EBUSY; | ||
352 | if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { | ||
353 | if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status)) | ||
354 | __module_get(THIS_MODULE); | ||
355 | wdt_start(); | ||
356 | } | ||
357 | return nonseekable_open(inode, file); | ||
358 | } | ||
359 | |||
360 | /** | ||
361 | * wdt_release - watchdog file_operations .release | ||
362 | * @inode: inode of the device | ||
363 | * @file: file handle to the device | ||
364 | * | ||
365 | * Closing the watchdog device either stops the watchdog timer | ||
366 | * or in the case, that nowayout is set or the magic character | ||
367 | * wasn't written, a critical warning about an running watchdog | ||
368 | * timer is given. | ||
369 | * | ||
370 | * Used within the file operation of the watchdog device. | ||
371 | */ | ||
372 | |||
373 | static int wdt_release(struct inode *inode, struct file *file) | ||
374 | { | ||
375 | if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | ||
376 | if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) { | ||
377 | wdt_stop(); | ||
378 | clear_bit(WDTS_TIMER_RUN, &wdt_status); | ||
379 | } else { | ||
380 | wdt_keepalive(); | ||
381 | printk(KERN_CRIT PFX | ||
382 | "unexpected close, not stopping watchdog!\n"); | ||
383 | } | ||
384 | } | ||
385 | clear_bit(WDTS_DEV_OPEN, &wdt_status); | ||
386 | return 0; | ||
387 | } | ||
388 | |||
389 | /** | ||
390 | * wdt_write - watchdog file_operations .write | ||
391 | * @file: file handle to the watchdog | ||
392 | * @buf: buffer to write | ||
393 | * @count: count of bytes | ||
394 | * @ppos: pointer to the position to write. No seeks allowed | ||
395 | * | ||
396 | * A write to a watchdog device is defined as a keepalive signal. Any | ||
397 | * write of data will do, as we don't define content meaning. | ||
398 | * | ||
399 | * Used within the file operation of the watchdog device. | ||
400 | */ | ||
401 | |||
402 | static ssize_t wdt_write(struct file *file, const char __user *buf, | ||
403 | size_t count, loff_t *ppos) | ||
404 | { | ||
405 | if (count) { | ||
406 | clear_bit(WDTS_EXPECTED, &wdt_status); | ||
407 | wdt_keepalive(); | ||
408 | } | ||
409 | if (!nowayout) { | ||
410 | size_t ofs; | ||
411 | |||
412 | /* note: just in case someone wrote the magic character long ago */ | ||
413 | for (ofs = 0; ofs != count; ofs++) { | ||
414 | char c; | ||
415 | if (get_user(c, buf + ofs)) | ||
416 | return -EFAULT; | ||
417 | if (c == WD_MAGIC) | ||
418 | set_bit(WDTS_EXPECTED, &wdt_status); | ||
419 | } | ||
420 | } | ||
421 | return count; | ||
422 | } | ||
423 | |||
424 | static struct watchdog_info ident = { | ||
425 | .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, | ||
426 | .firmware_version = 1, | ||
427 | .identity = WATCHDOG_NAME, | ||
428 | }; | ||
429 | |||
430 | /** | ||
431 | * wdt_ioctl - watchdog file_operations .unlocked_ioctl | ||
432 | * @file: file handle to the device | ||
433 | * @cmd: watchdog command | ||
434 | * @arg: argument pointer | ||
435 | * | ||
436 | * The watchdog API defines a common set of functions for all watchdogs | ||
437 | * according to their available features. | ||
438 | * | ||
439 | * Used within the file operation of the watchdog device. | ||
440 | */ | ||
441 | |||
442 | static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | ||
443 | { | ||
444 | int rc = 0, status, new_options, new_timeout; | ||
445 | union { | ||
446 | struct watchdog_info __user *ident; | ||
447 | int __user *i; | ||
448 | } uarg; | ||
449 | |||
450 | uarg.i = (int __user *)arg; | ||
451 | |||
452 | switch (cmd) { | ||
453 | case WDIOC_GETSUPPORT: | ||
454 | return copy_to_user(uarg.ident, | ||
455 | &ident, sizeof(ident)) ? -EFAULT : 0; | ||
456 | |||
457 | case WDIOC_GETSTATUS: | ||
458 | wdt_get_status(&status); | ||
459 | return put_user(status, uarg.i); | ||
460 | |||
461 | case WDIOC_GETBOOTSTATUS: | ||
462 | return put_user(0, uarg.i); | ||
463 | |||
464 | case WDIOC_KEEPALIVE: | ||
465 | wdt_keepalive(); | ||
466 | return 0; | ||
467 | |||
468 | case WDIOC_SETOPTIONS: | ||
469 | if (get_user(new_options, uarg.i)) | ||
470 | return -EFAULT; | ||
471 | |||
472 | switch (new_options) { | ||
473 | case WDIOS_DISABLECARD: | ||
474 | if (test_bit(WDTS_TIMER_RUN, &wdt_status)) | ||
475 | wdt_stop(); | ||
476 | clear_bit(WDTS_TIMER_RUN, &wdt_status); | ||
477 | return 0; | ||
478 | |||
479 | case WDIOS_ENABLECARD: | ||
480 | if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) | ||
481 | wdt_start(); | ||
482 | return 0; | ||
483 | |||
484 | default: | ||
485 | return -EFAULT; | ||
486 | } | ||
487 | |||
488 | case WDIOC_SETTIMEOUT: | ||
489 | if (get_user(new_timeout, uarg.i)) | ||
490 | return -EFAULT; | ||
491 | rc = wdt_set_timeout(new_timeout); | ||
492 | case WDIOC_GETTIMEOUT: | ||
493 | if (put_user(timeout, uarg.i)) | ||
494 | return -EFAULT; | ||
495 | return rc; | ||
496 | |||
497 | default: | ||
498 | return -ENOTTY; | ||
499 | } | ||
500 | } | ||
501 | |||
502 | static int wdt_notify_sys(struct notifier_block *this, unsigned long code, | ||
503 | void *unused) | ||
504 | { | ||
505 | if (code == SYS_DOWN || code == SYS_HALT) | ||
506 | wdt_stop(); | ||
507 | return NOTIFY_DONE; | ||
508 | } | ||
509 | |||
510 | static const struct file_operations wdt_fops = { | ||
511 | .owner = THIS_MODULE, | ||
512 | .llseek = no_llseek, | ||
513 | .write = wdt_write, | ||
514 | .unlocked_ioctl = wdt_ioctl, | ||
515 | .open = wdt_open, | ||
516 | .release = wdt_release, | ||
517 | }; | ||
518 | |||
519 | static struct miscdevice wdt_miscdev = { | ||
520 | .minor = WATCHDOG_MINOR, | ||
521 | .name = "watchdog", | ||
522 | .fops = &wdt_fops, | ||
523 | }; | ||
524 | |||
525 | static struct notifier_block wdt_notifier = { | ||
526 | .notifier_call = wdt_notify_sys, | ||
527 | }; | ||
528 | |||
529 | static int __init it87_wdt_init(void) | ||
530 | { | ||
531 | int rc = 0; | ||
532 | u16 chip_type; | ||
533 | u8 chip_rev; | ||
534 | unsigned long flags; | ||
535 | |||
536 | spin_lock_irqsave(&spinlock, flags); | ||
537 | superio_enter(); | ||
538 | chip_type = superio_inw(CHIPID); | ||
539 | chip_rev = superio_inb(CHIPREV) & 0x0f; | ||
540 | superio_exit(); | ||
541 | spin_unlock_irqrestore(&spinlock, flags); | ||
542 | |||
543 | switch (chip_type) { | ||
544 | case IT8716_ID: | ||
545 | case IT8718_ID: | ||
546 | case IT8726_ID: | ||
547 | break; | ||
548 | case IT8712_ID: | ||
549 | if (chip_rev > 7) | ||
550 | break; | ||
551 | case IT8705_ID: | ||
552 | printk(KERN_ERR PFX | ||
553 | "Unsupported Chip found, Chip %04x Revision %02x\n", | ||
554 | chip_type, chip_rev); | ||
555 | return -ENODEV; | ||
556 | case NO_DEV_ID: | ||
557 | printk(KERN_ERR PFX "no device\n"); | ||
558 | return -ENODEV; | ||
559 | default: | ||
560 | printk(KERN_ERR PFX | ||
561 | "Unknown Chip found, Chip %04x Revision %04x\n", | ||
562 | chip_type, chip_rev); | ||
563 | return -ENODEV; | ||
564 | } | ||
565 | |||
566 | spin_lock_irqsave(&spinlock, flags); | ||
567 | superio_enter(); | ||
568 | |||
569 | superio_select(GPIO); | ||
570 | superio_outb(WDT_TOV1, WDTCFG); | ||
571 | superio_outb(0x00, WDTCTRL); | ||
572 | |||
573 | /* First try to get Gameport support */ | ||
574 | if (chip_type != IT8718_ID && !nogameport) { | ||
575 | superio_select(GAMEPORT); | ||
576 | base = superio_inw(BASEREG); | ||
577 | if (!base) { | ||
578 | base = GP_BASE_DEFAULT; | ||
579 | superio_outw(base, BASEREG); | ||
580 | } | ||
581 | gpact = superio_inb(ACTREG); | ||
582 | superio_outb(0x01, ACTREG); | ||
583 | superio_exit(); | ||
584 | spin_unlock_irqrestore(&spinlock, flags); | ||
585 | if (request_region(base, 1, WATCHDOG_NAME)) | ||
586 | set_bit(WDTS_USE_GP, &wdt_status); | ||
587 | else | ||
588 | rc = -EIO; | ||
589 | } else { | ||
590 | superio_exit(); | ||
591 | spin_unlock_irqrestore(&spinlock, flags); | ||
592 | } | ||
593 | |||
594 | /* If we haven't Gameport support, try to get CIR support */ | ||
595 | if (!test_bit(WDTS_USE_GP, &wdt_status)) { | ||
596 | if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) { | ||
597 | if (rc == -EIO) | ||
598 | printk(KERN_ERR PFX | ||
599 | "I/O Address 0x%04x and 0x%04x" | ||
600 | " already in use\n", base, CIR_BASE); | ||
601 | else | ||
602 | printk(KERN_ERR PFX | ||
603 | "I/O Address 0x%04x already in use\n", | ||
604 | CIR_BASE); | ||
605 | rc = -EIO; | ||
606 | goto err_out; | ||
607 | } | ||
608 | base = CIR_BASE; | ||
609 | spin_lock_irqsave(&spinlock, flags); | ||
610 | superio_enter(); | ||
611 | |||
612 | superio_select(CIR); | ||
613 | superio_outw(base, BASEREG); | ||
614 | superio_outb(0x00, CIR_ILS); | ||
615 | ciract = superio_inb(ACTREG); | ||
616 | superio_outb(0x01, ACTREG); | ||
617 | if (rc == -EIO) { | ||
618 | superio_select(GAMEPORT); | ||
619 | superio_outb(gpact, ACTREG); | ||
620 | } | ||
621 | |||
622 | superio_exit(); | ||
623 | spin_unlock_irqrestore(&spinlock, flags); | ||
624 | } | ||
625 | |||
626 | if (timeout < 1 || timeout > 65535) { | ||
627 | timeout = DEFAULT_TIMEOUT; | ||
628 | printk(KERN_WARNING PFX | ||
629 | "Timeout value out of range, use default %d sec\n", | ||
630 | DEFAULT_TIMEOUT); | ||
631 | } | ||
632 | |||
633 | rc = register_reboot_notifier(&wdt_notifier); | ||
634 | if (rc) { | ||
635 | printk(KERN_ERR PFX | ||
636 | "Cannot register reboot notifier (err=%d)\n", rc); | ||
637 | goto err_out_region; | ||
638 | } | ||
639 | |||
640 | rc = misc_register(&wdt_miscdev); | ||
641 | if (rc) { | ||
642 | printk(KERN_ERR PFX | ||
643 | "Cannot register miscdev on minor=%d (err=%d)\n", | ||
644 | wdt_miscdev.minor, rc); | ||
645 | goto err_out_reboot; | ||
646 | } | ||
647 | |||
648 | /* Initialize CIR to use it as keepalive source */ | ||
649 | if (!test_bit(WDTS_USE_GP, &wdt_status)) { | ||
650 | outb(0x00, CIR_RCR(base)); | ||
651 | outb(0xc0, CIR_TCR1(base)); | ||
652 | outb(0x5c, CIR_TCR2(base)); | ||
653 | outb(0x10, CIR_IER(base)); | ||
654 | outb(0x00, CIR_BDHR(base)); | ||
655 | outb(0x01, CIR_BDLR(base)); | ||
656 | outb(0x09, CIR_IER(base)); | ||
657 | } | ||
658 | |||
659 | printk(KERN_INFO PFX "Chip it%04x revision %d initialized. " | ||
660 | "timeout=%d sec (nowayout=%d testmode=%d exclusive=%d " | ||
661 | "nogameport=%d)\n", chip_type, chip_rev, timeout, | ||
662 | nowayout, testmode, exclusive, nogameport); | ||
663 | |||
664 | return 0; | ||
665 | |||
666 | err_out_reboot: | ||
667 | unregister_reboot_notifier(&wdt_notifier); | ||
668 | err_out_region: | ||
669 | release_region(base, test_bit(WDTS_USE_GP, &wdt_status) ? 1 : 8); | ||
670 | if (!test_bit(WDTS_USE_GP, &wdt_status)) { | ||
671 | spin_lock_irqsave(&spinlock, flags); | ||
672 | superio_enter(); | ||
673 | superio_select(CIR); | ||
674 | superio_outb(ciract, ACTREG); | ||
675 | superio_exit(); | ||
676 | spin_unlock_irqrestore(&spinlock, flags); | ||
677 | } | ||
678 | err_out: | ||
679 | if (chip_type != IT8718_ID && !nogameport) { | ||
680 | spin_lock_irqsave(&spinlock, flags); | ||
681 | superio_enter(); | ||
682 | superio_select(GAMEPORT); | ||
683 | superio_outb(gpact, ACTREG); | ||
684 | superio_exit(); | ||
685 | spin_unlock_irqrestore(&spinlock, flags); | ||
686 | } | ||
687 | |||
688 | return rc; | ||
689 | } | ||
690 | |||
691 | static void __exit it87_wdt_exit(void) | ||
692 | { | ||
693 | unsigned long flags; | ||
694 | int nolock; | ||
695 | |||
696 | nolock = !spin_trylock_irqsave(&spinlock, flags); | ||
697 | superio_enter(); | ||
698 | superio_select(GPIO); | ||
699 | superio_outb(0x00, WDTCTRL); | ||
700 | superio_outb(0x00, WDTCFG); | ||
701 | superio_outb(0x00, WDTVALMSB); | ||
702 | superio_outb(0x00, WDTVALLSB); | ||
703 | if (test_bit(WDTS_USE_GP, &wdt_status)) { | ||
704 | superio_select(GAMEPORT); | ||
705 | superio_outb(gpact, ACTREG); | ||
706 | } else { | ||
707 | superio_select(CIR); | ||
708 | superio_outb(ciract, ACTREG); | ||
709 | } | ||
710 | superio_exit(); | ||
711 | if (!nolock) | ||
712 | spin_unlock_irqrestore(&spinlock, flags); | ||
713 | |||
714 | misc_deregister(&wdt_miscdev); | ||
715 | unregister_reboot_notifier(&wdt_notifier); | ||
716 | release_region(base, test_bit(WDTS_USE_GP, &wdt_status) ? 1 : 8); | ||
717 | } | ||
718 | |||
719 | module_init(it87_wdt_init); | ||
720 | module_exit(it87_wdt_exit); | ||
721 | |||
722 | MODULE_AUTHOR("Oliver Schuster"); | ||
723 | MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O"); | ||
724 | MODULE_LICENSE("GPL"); | ||
725 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); | ||