diff options
-rw-r--r-- | arch/arm/mach-iop32x/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-iop32x/common.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-iop32x/iq31244-pci.c | 45 | ||||
-rw-r--r-- | arch/arm/mach-iop32x/iq80321-pci.c | 45 | ||||
-rw-r--r-- | arch/arm/mach-iop32x/irq.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-iop32x/pci.c | 220 | ||||
-rw-r--r-- | arch/arm/mach-iop33x/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-iop33x/common.c | 22 | ||||
-rw-r--r-- | arch/arm/mach-iop33x/iq80331-pci.c | 45 | ||||
-rw-r--r-- | arch/arm/mach-iop33x/iq80332-pci.c | 45 | ||||
-rw-r--r-- | arch/arm/mach-iop33x/irq.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-iop33x/pci.c | 222 | ||||
-rw-r--r-- | include/asm-arm/arch-iop32x/hardware.h | 20 | ||||
-rw-r--r-- | include/asm-arm/arch-iop32x/iop321.h | 86 | ||||
-rw-r--r-- | include/asm-arm/arch-iop32x/memory.h | 4 | ||||
-rw-r--r-- | include/asm-arm/arch-iop32x/system.h | 2 | ||||
-rw-r--r-- | include/asm-arm/arch-iop33x/hardware.h | 20 | ||||
-rw-r--r-- | include/asm-arm/arch-iop33x/iop331.h | 96 | ||||
-rw-r--r-- | include/asm-arm/arch-iop33x/memory.h | 4 | ||||
-rw-r--r-- | include/asm-arm/arch-iop33x/system.h | 2 | ||||
-rw-r--r-- | include/asm-arm/mach/pci.h | 8 |
21 files changed, 30 insertions, 870 deletions
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile index 94144f7efa6c..7266224ab6d7 100644 --- a/arch/arm/mach-iop32x/Makefile +++ b/arch/arm/mach-iop32x/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for the linux kernel. | 2 | # Makefile for the linux kernel. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y := common.o setup.o irq.o pci.o time.o | 5 | obj-y := common.o setup.o irq.o time.o |
6 | obj-m := | 6 | obj-m := |
7 | obj-n := | 7 | obj-n := |
8 | obj- := | 8 | obj- := |
diff --git a/arch/arm/mach-iop32x/common.c b/arch/arm/mach-iop32x/common.c index 17e7d650fecb..9a17a081327d 100644 --- a/arch/arm/mach-iop32x/common.c +++ b/arch/arm/mach-iop32x/common.c | |||
@@ -16,12 +16,6 @@ | |||
16 | #include <asm/hardware.h> | 16 | #include <asm/hardware.h> |
17 | #include <asm/hardware/iop3xx.h> | 17 | #include <asm/hardware/iop3xx.h> |
18 | 18 | ||
19 | /* | ||
20 | * Shared variables | ||
21 | */ | ||
22 | unsigned long iop3xx_pcibios_min_io = 0; | ||
23 | unsigned long iop3xx_pcibios_min_mem = 0; | ||
24 | |||
25 | #ifdef CONFIG_ARCH_EP80219 | 19 | #ifdef CONFIG_ARCH_EP80219 |
26 | #include <linux/kernel.h> | 20 | #include <linux/kernel.h> |
27 | /* | 21 | /* |
diff --git a/arch/arm/mach-iop32x/iq31244-pci.c b/arch/arm/mach-iop32x/iq31244-pci.c index e447c8103ecd..605b79553747 100644 --- a/arch/arm/mach-iop32x/iq31244-pci.c +++ b/arch/arm/mach-iop32x/iq31244-pci.c | |||
@@ -67,51 +67,12 @@ iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) | |||
67 | return PCI_IRQ_TABLE_LOOKUP(0, 7); | 67 | return PCI_IRQ_TABLE_LOOKUP(0, 7); |
68 | } | 68 | } |
69 | 69 | ||
70 | static int iq31244_setup(int nr, struct pci_sys_data *sys) | ||
71 | { | ||
72 | struct resource *res; | ||
73 | |||
74 | if(nr != 0) | ||
75 | return 0; | ||
76 | |||
77 | res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); | ||
78 | if (!res) | ||
79 | panic("PCI: unable to alloc resources"); | ||
80 | |||
81 | res[0].start = IOP321_PCI_LOWER_IO_VA; | ||
82 | res[0].end = IOP321_PCI_UPPER_IO_VA; | ||
83 | res[0].name = "IQ31244 PCI I/O Space"; | ||
84 | res[0].flags = IORESOURCE_IO; | ||
85 | |||
86 | res[1].start = IOP321_PCI_LOWER_MEM_PA; | ||
87 | res[1].end = IOP321_PCI_UPPER_MEM_PA; | ||
88 | res[1].name = "IQ31244 PCI Memory Space"; | ||
89 | res[1].flags = IORESOURCE_MEM; | ||
90 | |||
91 | request_resource(&ioport_resource, &res[0]); | ||
92 | request_resource(&iomem_resource, &res[1]); | ||
93 | |||
94 | sys->mem_offset = IOP321_PCI_MEM_OFFSET; | ||
95 | sys->io_offset = IOP321_PCI_IO_OFFSET; | ||
96 | |||
97 | sys->resource[0] = &res[0]; | ||
98 | sys->resource[1] = &res[1]; | ||
99 | sys->resource[2] = NULL; | ||
100 | |||
101 | return 1; | ||
102 | } | ||
103 | |||
104 | static void iq31244_preinit(void) | ||
105 | { | ||
106 | iop321_init(); | ||
107 | } | ||
108 | |||
109 | static struct hw_pci iq31244_pci __initdata = { | 70 | static struct hw_pci iq31244_pci __initdata = { |
110 | .swizzle = pci_std_swizzle, | 71 | .swizzle = pci_std_swizzle, |
111 | .nr_controllers = 1, | 72 | .nr_controllers = 1, |
112 | .setup = iq31244_setup, | 73 | .setup = iop3xx_pci_setup, |
113 | .scan = iop321_scan_bus, | 74 | .scan = iop3xx_pci_scan_bus, |
114 | .preinit = iq31244_preinit, | 75 | .preinit = iop3xx_pci_preinit, |
115 | .map_irq = iq31244_map_irq | 76 | .map_irq = iq31244_map_irq |
116 | }; | 77 | }; |
117 | 78 | ||
diff --git a/arch/arm/mach-iop32x/iq80321-pci.c b/arch/arm/mach-iop32x/iq80321-pci.c index 8767950e131f..cedc37b968b7 100644 --- a/arch/arm/mach-iop32x/iq80321-pci.c +++ b/arch/arm/mach-iop32x/iq80321-pci.c | |||
@@ -61,51 +61,12 @@ iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) | |||
61 | return pci_irq_table[idsel%4][pin-1]; | 61 | return pci_irq_table[idsel%4][pin-1]; |
62 | } | 62 | } |
63 | 63 | ||
64 | static int iq80321_setup(int nr, struct pci_sys_data *sys) | ||
65 | { | ||
66 | struct resource *res; | ||
67 | |||
68 | if(nr != 0) | ||
69 | return 0; | ||
70 | |||
71 | res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); | ||
72 | if (!res) | ||
73 | panic("PCI: unable to alloc resources"); | ||
74 | |||
75 | res[0].start = IOP321_PCI_LOWER_IO_VA; | ||
76 | res[0].end = IOP321_PCI_UPPER_IO_VA; | ||
77 | res[0].name = "IQ80321 PCI I/O Space"; | ||
78 | res[0].flags = IORESOURCE_IO; | ||
79 | |||
80 | res[1].start = IOP321_PCI_LOWER_MEM_PA; | ||
81 | res[1].end = IOP321_PCI_UPPER_MEM_PA; | ||
82 | res[1].name = "IQ80321 PCI Memory Space"; | ||
83 | res[1].flags = IORESOURCE_MEM; | ||
84 | |||
85 | request_resource(&ioport_resource, &res[0]); | ||
86 | request_resource(&iomem_resource, &res[1]); | ||
87 | |||
88 | sys->mem_offset = IOP321_PCI_MEM_OFFSET; | ||
89 | sys->io_offset = IOP321_PCI_IO_OFFSET; | ||
90 | |||
91 | sys->resource[0] = &res[0]; | ||
92 | sys->resource[1] = &res[1]; | ||
93 | sys->resource[2] = NULL; | ||
94 | |||
95 | return 1; | ||
96 | } | ||
97 | |||
98 | static void iq80321_preinit(void) | ||
99 | { | ||
100 | iop321_init(); | ||
101 | } | ||
102 | |||
103 | static struct hw_pci iq80321_pci __initdata = { | 64 | static struct hw_pci iq80321_pci __initdata = { |
104 | .swizzle = pci_std_swizzle, | 65 | .swizzle = pci_std_swizzle, |
105 | .nr_controllers = 1, | 66 | .nr_controllers = 1, |
106 | .setup = iq80321_setup, | 67 | .setup = iop3xx_pci_setup, |
107 | .scan = iop321_scan_bus, | 68 | .scan = iop3xx_pci_scan_bus, |
108 | .preinit = iq80321_preinit, | 69 | .preinit = iop3xx_pci_preinit, |
109 | .map_irq = iq80321_map_irq | 70 | .map_irq = iq80321_map_irq |
110 | }; | 71 | }; |
111 | 72 | ||
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index c5f633d2d632..76f2d561dbc1 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c | |||
@@ -84,7 +84,7 @@ void __init iop321_init_irq(void) | |||
84 | intstr_write(0); // treat all as IRQ | 84 | intstr_write(0); // treat all as IRQ |
85 | if(machine_is_iq80321() || | 85 | if(machine_is_iq80321() || |
86 | machine_is_iq31244()) // all interrupts are inputs to chip | 86 | machine_is_iq31244()) // all interrupts are inputs to chip |
87 | *IOP321_PCIIRSR = 0x0f; | 87 | *IOP3XX_PCIIRSR = 0x0f; |
88 | 88 | ||
89 | for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++) | 89 | for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++) |
90 | { | 90 | { |
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c deleted file mode 100644 index 1a7c683673f2..000000000000 --- a/arch/arm/mach-iop32x/pci.c +++ /dev/null | |||
@@ -1,220 +0,0 @@ | |||
1 | /* | ||
2 | * arch/arm/mach-iop32x/pci.c | ||
3 | * | ||
4 | * PCI support for the Intel IOP321 chipset | ||
5 | * | ||
6 | * Author: Rory Bolt <rorybolt@pacbell.net> | ||
7 | * Copyright (C) 2002 Rory Bolt | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License version 2 as | ||
11 | * published by the Free Software Foundation. | ||
12 | * | ||
13 | */ | ||
14 | #include <linux/kernel.h> | ||
15 | #include <linux/pci.h> | ||
16 | #include <linux/slab.h> | ||
17 | #include <linux/mm.h> | ||
18 | #include <linux/init.h> | ||
19 | #include <linux/ioport.h> | ||
20 | |||
21 | #include <asm/io.h> | ||
22 | #include <asm/irq.h> | ||
23 | #include <asm/system.h> | ||
24 | #include <asm/hardware.h> | ||
25 | #include <asm/mach/pci.h> | ||
26 | |||
27 | #include <asm/arch/iop321.h> | ||
28 | |||
29 | // #define DEBUG | ||
30 | |||
31 | #ifdef DEBUG | ||
32 | #define DBG(x...) printk(x) | ||
33 | #else | ||
34 | #define DBG(x...) do { } while (0) | ||
35 | #endif | ||
36 | |||
37 | /* | ||
38 | * This routine builds either a type0 or type1 configuration command. If the | ||
39 | * bus is on the 80321 then a type0 made, else a type1 is created. | ||
40 | */ | ||
41 | static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) | ||
42 | { | ||
43 | struct pci_sys_data *sys = bus->sysdata; | ||
44 | u32 addr; | ||
45 | |||
46 | if (sys->busnr == bus->number) | ||
47 | addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); | ||
48 | else | ||
49 | addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; | ||
50 | |||
51 | addr |= PCI_FUNC(devfn) << 8 | (where & ~3); | ||
52 | |||
53 | return addr; | ||
54 | } | ||
55 | |||
56 | /* | ||
57 | * This routine checks the status of the last configuration cycle. If an error | ||
58 | * was detected it returns a 1, else it returns a 0. The errors being checked | ||
59 | * are parity, master abort, target abort (master and target). These types of | ||
60 | * errors occure during a config cycle where there is no device, like during | ||
61 | * the discovery stage. | ||
62 | */ | ||
63 | static int iop321_pci_status(void) | ||
64 | { | ||
65 | unsigned int status; | ||
66 | int ret = 0; | ||
67 | |||
68 | /* | ||
69 | * Check the status registers. | ||
70 | */ | ||
71 | status = *IOP321_ATUSR; | ||
72 | if (status & 0xf900) | ||
73 | { | ||
74 | DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); | ||
75 | *IOP321_ATUSR = status & 0xf900; | ||
76 | ret = 1; | ||
77 | } | ||
78 | status = *IOP321_ATUISR; | ||
79 | if (status & 0x679f) | ||
80 | { | ||
81 | DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); | ||
82 | *IOP321_ATUISR = status & 0x679f; | ||
83 | ret = 1; | ||
84 | } | ||
85 | return ret; | ||
86 | } | ||
87 | |||
88 | /* | ||
89 | * Simply write the address register and read the configuration | ||
90 | * data. Note that the 4 nop's ensure that we are able to handle | ||
91 | * a delayed abort (in theory.) | ||
92 | */ | ||
93 | static inline u32 iop321_read(unsigned long addr) | ||
94 | { | ||
95 | u32 val; | ||
96 | |||
97 | __asm__ __volatile__( | ||
98 | "str %1, [%2]\n\t" | ||
99 | "ldr %0, [%3]\n\t" | ||
100 | "nop\n\t" | ||
101 | "nop\n\t" | ||
102 | "nop\n\t" | ||
103 | "nop\n\t" | ||
104 | : "=r" (val) | ||
105 | : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); | ||
106 | |||
107 | return val; | ||
108 | } | ||
109 | |||
110 | /* | ||
111 | * The read routines must check the error status of the last configuration | ||
112 | * cycle. If there was an error, the routine returns all hex f's. | ||
113 | */ | ||
114 | static int | ||
115 | iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, | ||
116 | int size, u32 *value) | ||
117 | { | ||
118 | unsigned long addr = iop321_cfg_address(bus, devfn, where); | ||
119 | u32 val = iop321_read(addr) >> ((where & 3) * 8); | ||
120 | |||
121 | if( iop321_pci_status() ) | ||
122 | val = 0xffffffff; | ||
123 | |||
124 | *value = val; | ||
125 | |||
126 | return PCIBIOS_SUCCESSFUL; | ||
127 | } | ||
128 | |||
129 | static int | ||
130 | iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, | ||
131 | int size, u32 value) | ||
132 | { | ||
133 | unsigned long addr = iop321_cfg_address(bus, devfn, where); | ||
134 | u32 val; | ||
135 | |||
136 | if (size != 4) { | ||
137 | val = iop321_read(addr); | ||
138 | if (!iop321_pci_status() == 0) | ||
139 | return PCIBIOS_SUCCESSFUL; | ||
140 | |||
141 | where = (where & 3) * 8; | ||
142 | |||
143 | if (size == 1) | ||
144 | val &= ~(0xff << where); | ||
145 | else | ||
146 | val &= ~(0xffff << where); | ||
147 | |||
148 | *IOP321_OCCDR = val | value << where; | ||
149 | } else { | ||
150 | asm volatile( | ||
151 | "str %1, [%2]\n\t" | ||
152 | "str %0, [%3]\n\t" | ||
153 | "nop\n\t" | ||
154 | "nop\n\t" | ||
155 | "nop\n\t" | ||
156 | "nop\n\t" | ||
157 | : | ||
158 | : "r" (value), "r" (addr), | ||
159 | "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); | ||
160 | } | ||
161 | |||
162 | return PCIBIOS_SUCCESSFUL; | ||
163 | } | ||
164 | |||
165 | static struct pci_ops iop321_ops = { | ||
166 | .read = iop321_read_config, | ||
167 | .write = iop321_write_config, | ||
168 | }; | ||
169 | |||
170 | /* | ||
171 | * When a PCI device does not exist during config cycles, the 80200 gets a | ||
172 | * bus error instead of returning 0xffffffff. This handler simply returns. | ||
173 | */ | ||
174 | int | ||
175 | iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | ||
176 | { | ||
177 | DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", | ||
178 | addr, fsr, regs->ARM_pc, regs->ARM_lr); | ||
179 | |||
180 | /* | ||
181 | * If it was an imprecise abort, then we need to correct the | ||
182 | * return address to be _after_ the instruction. | ||
183 | */ | ||
184 | if (fsr & (1 << 10)) | ||
185 | regs->ARM_pc += 4; | ||
186 | |||
187 | return 0; | ||
188 | } | ||
189 | |||
190 | /* | ||
191 | * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. | ||
192 | */ | ||
193 | struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) | ||
194 | { | ||
195 | return pci_scan_bus(sys->busnr, &iop321_ops, sys); | ||
196 | } | ||
197 | |||
198 | void iop321_init(void) | ||
199 | { | ||
200 | DBG("PCI: Intel 80321 PCI init code.\n"); | ||
201 | DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); | ||
202 | DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", | ||
203 | *IOP321_OMWTVR0, | ||
204 | *IOP321_OIOWTVR); | ||
205 | DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); | ||
206 | DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", | ||
207 | *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); | ||
208 | DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); | ||
209 | DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", | ||
210 | *IOP321_IABAR1, *IOP321_IALR1); | ||
211 | DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", | ||
212 | *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); | ||
213 | DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", | ||
214 | *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); | ||
215 | DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", | ||
216 | *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); | ||
217 | |||
218 | hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); | ||
219 | } | ||
220 | |||
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile index 7865923b0a60..6c74f13b1139 100644 --- a/arch/arm/mach-iop33x/Makefile +++ b/arch/arm/mach-iop33x/Makefile | |||
@@ -2,7 +2,7 @@ | |||
2 | # Makefile for the linux kernel. | 2 | # Makefile for the linux kernel. |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y := common.o setup.o irq.o pci.o time.o | 5 | obj-y := setup.o irq.o time.o |
6 | obj-m := | 6 | obj-m := |
7 | obj-n := | 7 | obj-n := |
8 | obj- := | 8 | obj- := |
diff --git a/arch/arm/mach-iop33x/common.c b/arch/arm/mach-iop33x/common.c deleted file mode 100644 index dd75f2b8e74f..000000000000 --- a/arch/arm/mach-iop33x/common.c +++ /dev/null | |||
@@ -1,22 +0,0 @@ | |||
1 | /* | ||
2 | * arch/arm/mach-iop33x/common.c | ||
3 | * | ||
4 | * Common routines shared across all IOP3xx implementations | ||
5 | * | ||
6 | * Author: Deepak Saxena <dsaxena@mvista.com> | ||
7 | * | ||
8 | * Copyright 2003 (c) MontaVista, Software, Inc. | ||
9 | * | ||
10 | * This file is licensed under the terms of the GNU General Public | ||
11 | * License version 2. This program is licensed "as is" without any | ||
12 | * warranty of any kind, whether express or implied. | ||
13 | */ | ||
14 | |||
15 | #include <linux/delay.h> | ||
16 | #include <asm/hardware.h> | ||
17 | |||
18 | /* | ||
19 | * Shared variables | ||
20 | */ | ||
21 | unsigned long iop3xx_pcibios_min_io = 0; | ||
22 | unsigned long iop3xx_pcibios_min_mem = 0; | ||
diff --git a/arch/arm/mach-iop33x/iq80331-pci.c b/arch/arm/mach-iop33x/iq80331-pci.c index 71adb12a9421..8b0bed5e2f91 100644 --- a/arch/arm/mach-iop33x/iq80331-pci.c +++ b/arch/arm/mach-iop33x/iq80331-pci.c | |||
@@ -57,51 +57,12 @@ iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) | |||
57 | return PCI_IRQ_TABLE_LOOKUP(1, 7); | 57 | return PCI_IRQ_TABLE_LOOKUP(1, 7); |
58 | } | 58 | } |
59 | 59 | ||
60 | static int iq80331_setup(int nr, struct pci_sys_data *sys) | ||
61 | { | ||
62 | struct resource *res; | ||
63 | |||
64 | if(nr != 0) | ||
65 | return 0; | ||
66 | |||
67 | res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); | ||
68 | if (!res) | ||
69 | panic("PCI: unable to alloc resources"); | ||
70 | |||
71 | res[0].start = IOP331_PCI_LOWER_IO_VA; | ||
72 | res[0].end = IOP331_PCI_UPPER_IO_VA; | ||
73 | res[0].name = "IQ80331 PCI I/O Space"; | ||
74 | res[0].flags = IORESOURCE_IO; | ||
75 | |||
76 | res[1].start = IOP331_PCI_LOWER_MEM_PA; | ||
77 | res[1].end = IOP331_PCI_UPPER_MEM_PA; | ||
78 | res[1].name = "IQ80331 PCI Memory Space"; | ||
79 | res[1].flags = IORESOURCE_MEM; | ||
80 | |||
81 | request_resource(&ioport_resource, &res[0]); | ||
82 | request_resource(&iomem_resource, &res[1]); | ||
83 | |||
84 | sys->mem_offset = IOP331_PCI_MEM_OFFSET; | ||
85 | sys->io_offset = IOP331_PCI_IO_OFFSET; | ||
86 | |||
87 | sys->resource[0] = &res[0]; | ||
88 | sys->resource[1] = &res[1]; | ||
89 | sys->resource[2] = NULL; | ||
90 | |||
91 | return 1; | ||
92 | } | ||
93 | |||
94 | static void iq80331_preinit(void) | ||
95 | { | ||
96 | iop331_init(); | ||
97 | } | ||
98 | |||
99 | static struct hw_pci iq80331_pci __initdata = { | 60 | static struct hw_pci iq80331_pci __initdata = { |
100 | .swizzle = pci_std_swizzle, | 61 | .swizzle = pci_std_swizzle, |
101 | .nr_controllers = 1, | 62 | .nr_controllers = 1, |
102 | .setup = iq80331_setup, | 63 | .setup = iop3xx_pci_setup, |
103 | .scan = iop331_scan_bus, | 64 | .scan = iop3xx_pci_scan_bus, |
104 | .preinit = iq80331_preinit, | 65 | .preinit = iop3xx_pci_preinit, |
105 | .map_irq = iq80331_map_irq | 66 | .map_irq = iq80331_map_irq |
106 | }; | 67 | }; |
107 | 68 | ||
diff --git a/arch/arm/mach-iop33x/iq80332-pci.c b/arch/arm/mach-iop33x/iq80332-pci.c index f3010f85b1a2..0de8aa748dd8 100644 --- a/arch/arm/mach-iop33x/iq80332-pci.c +++ b/arch/arm/mach-iop33x/iq80332-pci.c | |||
@@ -63,51 +63,12 @@ iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) | |||
63 | return PCI_IRQ_TABLE_LOOKUP(1, 7); | 63 | return PCI_IRQ_TABLE_LOOKUP(1, 7); |
64 | } | 64 | } |
65 | 65 | ||
66 | static int iq80332_setup(int nr, struct pci_sys_data *sys) | ||
67 | { | ||
68 | struct resource *res; | ||
69 | |||
70 | if(nr != 0) | ||
71 | return 0; | ||
72 | |||
73 | res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); | ||
74 | if (!res) | ||
75 | panic("PCI: unable to alloc resources"); | ||
76 | |||
77 | res[0].start = IOP331_PCI_LOWER_IO_VA; | ||
78 | res[0].end = IOP331_PCI_UPPER_IO_VA; | ||
79 | res[0].name = "IQ80332 PCI I/O Space"; | ||
80 | res[0].flags = IORESOURCE_IO; | ||
81 | |||
82 | res[1].start = IOP331_PCI_LOWER_MEM_PA; | ||
83 | res[1].end = IOP331_PCI_UPPER_MEM_PA; | ||
84 | res[1].name = "IQ80332 PCI Memory Space"; | ||
85 | res[1].flags = IORESOURCE_MEM; | ||
86 | |||
87 | request_resource(&ioport_resource, &res[0]); | ||
88 | request_resource(&iomem_resource, &res[1]); | ||
89 | |||
90 | sys->mem_offset = IOP331_PCI_MEM_OFFSET; | ||
91 | sys->io_offset = IOP331_PCI_IO_OFFSET; | ||
92 | |||
93 | sys->resource[0] = &res[0]; | ||
94 | sys->resource[1] = &res[1]; | ||
95 | sys->resource[2] = NULL; | ||
96 | |||
97 | return 1; | ||
98 | } | ||
99 | |||
100 | static void iq80332_preinit(void) | ||
101 | { | ||
102 | iop331_init(); | ||
103 | } | ||
104 | |||
105 | static struct hw_pci iq80332_pci __initdata = { | 66 | static struct hw_pci iq80332_pci __initdata = { |
106 | .swizzle = pci_std_swizzle, | 67 | .swizzle = pci_std_swizzle, |
107 | .nr_controllers = 1, | 68 | .nr_controllers = 1, |
108 | .setup = iq80332_setup, | 69 | .setup = iop3xx_pci_setup, |
109 | .scan = iop331_scan_bus, | 70 | .scan = iop3xx_pci_scan_bus, |
110 | .preinit = iq80332_preinit, | 71 | .preinit = iop3xx_pci_preinit, |
111 | .map_irq = iq80332_map_irq | 72 | .map_irq = iq80332_map_irq |
112 | }; | 73 | }; |
113 | 74 | ||
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index 029fa78876a5..bcffc33a5be8 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c | |||
@@ -117,7 +117,7 @@ void __init iop331_init_irq(void) | |||
117 | intstr_write0(0); // treat all as IRQ | 117 | intstr_write0(0); // treat all as IRQ |
118 | intstr_write1(0); | 118 | intstr_write1(0); |
119 | if(machine_is_iq80331()) // all interrupts are inputs to chip | 119 | if(machine_is_iq80331()) // all interrupts are inputs to chip |
120 | *IOP331_PCIIRSR = 0x0f; | 120 | *IOP3XX_PCIIRSR = 0x0f; |
121 | 121 | ||
122 | for(i = IOP331_IRQ_OFS; i < NR_IRQS; i++) | 122 | for(i = IOP331_IRQ_OFS; i < NR_IRQS; i++) |
123 | { | 123 | { |
diff --git a/arch/arm/mach-iop33x/pci.c b/arch/arm/mach-iop33x/pci.c deleted file mode 100644 index bf6aba91b47d..000000000000 --- a/arch/arm/mach-iop33x/pci.c +++ /dev/null | |||
@@ -1,222 +0,0 @@ | |||
1 | /* | ||
2 | * arch/arm/mach-iop33x/pci.c | ||
3 | * | ||
4 | * PCI support for the Intel IOP331 chipset | ||
5 | * | ||
6 | * Author: Dave Jiang (dave.jiang@intel.com) | ||
7 | * Copyright (C) 2003, 2004 Intel Corp. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License version 2 as | ||
11 | * published by the Free Software Foundation. | ||
12 | * | ||
13 | */ | ||
14 | #include <linux/kernel.h> | ||
15 | #include <linux/pci.h> | ||
16 | #include <linux/slab.h> | ||
17 | #include <linux/mm.h> | ||
18 | #include <linux/init.h> | ||
19 | #include <linux/ioport.h> | ||
20 | |||
21 | #include <asm/io.h> | ||
22 | #include <asm/irq.h> | ||
23 | #include <asm/system.h> | ||
24 | #include <asm/hardware.h> | ||
25 | #include <asm/mach/pci.h> | ||
26 | |||
27 | #include <asm/arch/iop331.h> | ||
28 | |||
29 | #undef DEBUG | ||
30 | #undef DEBUG1 | ||
31 | |||
32 | #ifdef DEBUG | ||
33 | #define DBG(x...) printk(x) | ||
34 | #else | ||
35 | #define DBG(x...) do { } while (0) | ||
36 | #endif | ||
37 | |||
38 | #ifdef DEBUG1 | ||
39 | #define DBG1(x...) printk(x) | ||
40 | #else | ||
41 | #define DBG1(x...) do { } while (0) | ||
42 | #endif | ||
43 | |||
44 | /* | ||
45 | * This routine builds either a type0 or type1 configuration command. If the | ||
46 | * bus is on the 80331 then a type0 made, else a type1 is created. | ||
47 | */ | ||
48 | static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where) | ||
49 | { | ||
50 | struct pci_sys_data *sys = bus->sysdata; | ||
51 | u32 addr; | ||
52 | |||
53 | if (sys->busnr == bus->number) | ||
54 | addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); | ||
55 | else | ||
56 | addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; | ||
57 | |||
58 | addr |= PCI_FUNC(devfn) << 8 | (where & ~3); | ||
59 | |||
60 | return addr; | ||
61 | } | ||
62 | |||
63 | /* | ||
64 | * This routine checks the status of the last configuration cycle. If an error | ||
65 | * was detected it returns a 1, else it returns a 0. The errors being checked | ||
66 | * are parity, master abort, target abort (master and target). These types of | ||
67 | * errors occure during a config cycle where there is no device, like during | ||
68 | * the discovery stage. | ||
69 | */ | ||
70 | static int iop331_pci_status(void) | ||
71 | { | ||
72 | unsigned int status; | ||
73 | int ret = 0; | ||
74 | |||
75 | /* | ||
76 | * Check the status registers. | ||
77 | */ | ||
78 | status = *IOP331_ATUSR; | ||
79 | if (status & 0xf900) | ||
80 | { | ||
81 | DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); | ||
82 | *IOP331_ATUSR = status & 0xf900; | ||
83 | ret = 1; | ||
84 | } | ||
85 | status = *IOP331_ATUISR; | ||
86 | if (status & 0x679f) | ||
87 | { | ||
88 | DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); | ||
89 | *IOP331_ATUISR = status & 0x679f; | ||
90 | ret = 1; | ||
91 | } | ||
92 | return ret; | ||
93 | } | ||
94 | |||
95 | /* | ||
96 | * Simply write the address register and read the configuration | ||
97 | * data. Note that the 4 nop's ensure that we are able to handle | ||
98 | * a delayed abort (in theory.) | ||
99 | */ | ||
100 | static inline u32 iop331_read(unsigned long addr) | ||
101 | { | ||
102 | u32 val; | ||
103 | |||
104 | __asm__ __volatile__( | ||
105 | "str %1, [%2]\n\t" | ||
106 | "ldr %0, [%3]\n\t" | ||
107 | "nop\n\t" | ||
108 | "nop\n\t" | ||
109 | "nop\n\t" | ||
110 | "nop\n\t" | ||
111 | : "=r" (val) | ||
112 | : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); | ||
113 | |||
114 | return val; | ||
115 | } | ||
116 | |||
117 | /* | ||
118 | * The read routines must check the error status of the last configuration | ||
119 | * cycle. If there was an error, the routine returns all hex f's. | ||
120 | */ | ||
121 | static int | ||
122 | iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where, | ||
123 | int size, u32 *value) | ||
124 | { | ||
125 | unsigned long addr = iop331_cfg_address(bus, devfn, where); | ||
126 | u32 val = iop331_read(addr) >> ((where & 3) * 8); | ||
127 | |||
128 | if( iop331_pci_status() ) | ||
129 | val = 0xffffffff; | ||
130 | |||
131 | *value = val; | ||
132 | |||
133 | return PCIBIOS_SUCCESSFUL; | ||
134 | } | ||
135 | |||
136 | static int | ||
137 | iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where, | ||
138 | int size, u32 value) | ||
139 | { | ||
140 | unsigned long addr = iop331_cfg_address(bus, devfn, where); | ||
141 | u32 val; | ||
142 | |||
143 | if (size != 4) { | ||
144 | val = iop331_read(addr); | ||
145 | if (!iop331_pci_status() == 0) | ||
146 | return PCIBIOS_SUCCESSFUL; | ||
147 | |||
148 | where = (where & 3) * 8; | ||
149 | |||
150 | if (size == 1) | ||
151 | val &= ~(0xff << where); | ||
152 | else | ||
153 | val &= ~(0xffff << where); | ||
154 | |||
155 | *IOP331_OCCDR = val | value << where; | ||
156 | } else { | ||
157 | asm volatile( | ||
158 | "str %1, [%2]\n\t" | ||
159 | "str %0, [%3]\n\t" | ||
160 | "nop\n\t" | ||
161 | "nop\n\t" | ||
162 | "nop\n\t" | ||
163 | "nop\n\t" | ||
164 | : | ||
165 | : "r" (value), "r" (addr), | ||
166 | "r" (IOP331_OCCAR), "r" (IOP331_OCCDR)); | ||
167 | } | ||
168 | |||
169 | return PCIBIOS_SUCCESSFUL; | ||
170 | } | ||
171 | |||
172 | static struct pci_ops iop331_ops = { | ||
173 | .read = iop331_read_config, | ||
174 | .write = iop331_write_config, | ||
175 | }; | ||
176 | |||
177 | /* | ||
178 | * When a PCI device does not exist during config cycles, the XScale gets a | ||
179 | * bus error instead of returning 0xffffffff. This handler simply returns. | ||
180 | */ | ||
181 | int | ||
182 | iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) | ||
183 | { | ||
184 | DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", | ||
185 | addr, fsr, regs->ARM_pc, regs->ARM_lr); | ||
186 | |||
187 | /* | ||
188 | * If it was an imprecise abort, then we need to correct the | ||
189 | * return address to be _after_ the instruction. | ||
190 | */ | ||
191 | if (fsr & (1 << 10)) | ||
192 | regs->ARM_pc += 4; | ||
193 | |||
194 | return 0; | ||
195 | } | ||
196 | |||
197 | /* | ||
198 | * Scan an IOP331 PCI bus. sys->bus defines which bus we scan. | ||
199 | */ | ||
200 | struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys) | ||
201 | { | ||
202 | return pci_scan_bus(sys->busnr, &iop331_ops, sys); | ||
203 | } | ||
204 | |||
205 | void iop331_init(void) | ||
206 | { | ||
207 | DBG1("PCI: Intel 80331 PCI init code.\n"); | ||
208 | DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD); | ||
209 | DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n", | ||
210 | *IOP331_OMWTVR0, | ||
211 | *IOP331_OIOWTVR); | ||
212 | DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1); | ||
213 | DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR); | ||
214 | DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0); | ||
215 | DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1); | ||
216 | DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR); | ||
217 | DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2); | ||
218 | DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3); | ||
219 | |||
220 | hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort"); | ||
221 | } | ||
222 | |||
diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h index 8fb10134a107..16d0630ab252 100644 --- a/include/asm-arm/arch-iop32x/hardware.h +++ b/include/asm-arm/arch-iop32x/hardware.h | |||
@@ -19,27 +19,11 @@ | |||
19 | */ | 19 | */ |
20 | 20 | ||
21 | #define pcibios_assign_all_busses() 1 | 21 | #define pcibios_assign_all_busses() 1 |
22 | #define PCIBIOS_MIN_IO 0x00000000 | ||
23 | #define PCIBIOS_MIN_MEM 0x00000000 | ||
22 | 24 | ||
23 | 25 | ||
24 | /* | 26 | /* |
25 | * The min PCI I/O and MEM space are dependent on what specific | ||
26 | * chipset/platform we are running on, so instead of hardcoding with | ||
27 | * #ifdefs, we just fill these in the platform level PCI init code. | ||
28 | */ | ||
29 | #ifndef __ASSEMBLY__ | ||
30 | extern unsigned long iop3xx_pcibios_min_io; | ||
31 | extern unsigned long iop3xx_pcibios_min_mem; | ||
32 | |||
33 | extern unsigned int processor_id; | ||
34 | #endif | ||
35 | |||
36 | /* | ||
37 | * We just set these to zero since they are really bogus anyways | ||
38 | */ | ||
39 | #define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) | ||
40 | #define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) | ||
41 | |||
42 | /* | ||
43 | * Generic chipset bits | 27 | * Generic chipset bits |
44 | * | 28 | * |
45 | */ | 29 | */ |
diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h index 1a82dd96bf50..e3c85a05e73a 100644 --- a/include/asm-arm/arch-iop32x/iop321.h +++ b/include/asm-arm/arch-iop32x/iop321.h | |||
@@ -25,27 +25,6 @@ | |||
25 | #endif | 25 | #endif |
26 | 26 | ||
27 | /* | 27 | /* |
28 | * IOP321 I/O and Mem space regions for PCI autoconfiguration | ||
29 | */ | ||
30 | #define IOP321_PCI_IO_WINDOW_SIZE 0x00010000 | ||
31 | #define IOP321_PCI_LOWER_IO_PA 0x90000000 | ||
32 | #define IOP321_PCI_LOWER_IO_VA 0xfe000000 | ||
33 | #define IOP321_PCI_LOWER_IO_BA (*IOP321_OIOWTVR) | ||
34 | #define IOP321_PCI_UPPER_IO_PA (IOP321_PCI_LOWER_IO_PA + IOP321_PCI_IO_WINDOW_SIZE - 1) | ||
35 | #define IOP321_PCI_UPPER_IO_VA (IOP321_PCI_LOWER_IO_VA + IOP321_PCI_IO_WINDOW_SIZE - 1) | ||
36 | #define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1) | ||
37 | #define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA) | ||
38 | |||
39 | /* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */ | ||
40 | #define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ | ||
41 | #define IOP321_PCI_LOWER_MEM_PA 0x80000000 | ||
42 | #define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0) | ||
43 | #define IOP321_PCI_UPPER_MEM_PA (IOP321_PCI_LOWER_MEM_PA + IOP321_PCI_MEM_WINDOW_SIZE - 1) | ||
44 | #define IOP321_PCI_UPPER_MEM_BA (IOP321_PCI_LOWER_MEM_BA + IOP321_PCI_MEM_WINDOW_SIZE - 1) | ||
45 | #define IOP321_PCI_MEM_OFFSET (IOP321_PCI_LOWER_MEM_PA - IOP321_PCI_LOWER_MEM_BA) | ||
46 | |||
47 | |||
48 | /* | ||
49 | * IOP321 chipset registers | 28 | * IOP321 chipset registers |
50 | */ | 29 | */ |
51 | #define IOP321_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ | 30 | #define IOP321_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ |
@@ -55,69 +34,6 @@ | |||
55 | /* Reserved 0x00000000 through 0x000000FF */ | 34 | /* Reserved 0x00000000 through 0x000000FF */ |
56 | 35 | ||
57 | /* Address Translation Unit 0x00000100 through 0x000001FF */ | 36 | /* Address Translation Unit 0x00000100 through 0x000001FF */ |
58 | #define IOP321_ATUVID (volatile u16 *)IOP321_REG_ADDR(0x00000100) | ||
59 | #define IOP321_ATUDID (volatile u16 *)IOP321_REG_ADDR(0x00000102) | ||
60 | #define IOP321_ATUCMD (volatile u16 *)IOP321_REG_ADDR(0x00000104) | ||
61 | #define IOP321_ATUSR (volatile u16 *)IOP321_REG_ADDR(0x00000106) | ||
62 | #define IOP321_ATURID (volatile u8 *)IOP321_REG_ADDR(0x00000108) | ||
63 | #define IOP321_ATUCCR (volatile u32 *)IOP321_REG_ADDR(0x00000109) | ||
64 | #define IOP321_ATUCLSR (volatile u8 *)IOP321_REG_ADDR(0x0000010C) | ||
65 | #define IOP321_ATULT (volatile u8 *)IOP321_REG_ADDR(0x0000010D) | ||
66 | #define IOP321_ATUHTR (volatile u8 *)IOP321_REG_ADDR(0x0000010E) | ||
67 | #define IOP321_ATUBIST (volatile u8 *)IOP321_REG_ADDR(0x0000010F) | ||
68 | #define IOP321_IABAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000110) | ||
69 | #define IOP321_IAUBAR0 (volatile u32 *)IOP321_REG_ADDR(0x00000114) | ||
70 | #define IOP321_IABAR1 (volatile u32 *)IOP321_REG_ADDR(0x00000118) | ||
71 | #define IOP321_IAUBAR1 (volatile u32 *)IOP321_REG_ADDR(0x0000011C) | ||
72 | #define IOP321_IABAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000120) | ||
73 | #define IOP321_IAUBAR2 (volatile u32 *)IOP321_REG_ADDR(0x00000124) | ||
74 | #define IOP321_ASVIR (volatile u16 *)IOP321_REG_ADDR(0x0000012C) | ||
75 | #define IOP321_ASIR (volatile u16 *)IOP321_REG_ADDR(0x0000012E) | ||
76 | #define IOP321_ERBAR (volatile u32 *)IOP321_REG_ADDR(0x00000130) | ||
77 | /* Reserved 0x00000134 through 0x0000013B */ | ||
78 | #define IOP321_ATUILR (volatile u8 *)IOP321_REG_ADDR(0x0000013C) | ||
79 | #define IOP321_ATUIPR (volatile u8 *)IOP321_REG_ADDR(0x0000013D) | ||
80 | #define IOP321_ATUMGNT (volatile u8 *)IOP321_REG_ADDR(0x0000013E) | ||
81 | #define IOP321_ATUMLAT (volatile u8 *)IOP321_REG_ADDR(0x0000013F) | ||
82 | #define IOP321_IALR0 (volatile u32 *)IOP321_REG_ADDR(0x00000140) | ||
83 | #define IOP321_IATVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000144) | ||
84 | #define IOP321_ERLR (volatile u32 *)IOP321_REG_ADDR(0x00000148) | ||
85 | #define IOP321_ERTVR (volatile u32 *)IOP321_REG_ADDR(0x0000014C) | ||
86 | #define IOP321_IALR1 (volatile u32 *)IOP321_REG_ADDR(0x00000150) | ||
87 | #define IOP321_IALR2 (volatile u32 *)IOP321_REG_ADDR(0x00000154) | ||
88 | #define IOP321_IATVR2 (volatile u32 *)IOP321_REG_ADDR(0x00000158) | ||
89 | #define IOP321_OIOWTVR (volatile u32 *)IOP321_REG_ADDR(0x0000015C) | ||
90 | #define IOP321_OMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000160) | ||
91 | #define IOP321_OUMWTVR0 (volatile u32 *)IOP321_REG_ADDR(0x00000164) | ||
92 | #define IOP321_OMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x00000168) | ||
93 | #define IOP321_OUMWTVR1 (volatile u32 *)IOP321_REG_ADDR(0x0000016C) | ||
94 | /* Reserved 0x00000170 through 0x00000177*/ | ||
95 | #define IOP321_OUDWTVR (volatile u32 *)IOP321_REG_ADDR(0x00000178) | ||
96 | /* Reserved 0x0000017C through 0x0000017F*/ | ||
97 | #define IOP321_ATUCR (volatile u32 *)IOP321_REG_ADDR(0x00000180) | ||
98 | #define IOP321_PCSR (volatile u32 *)IOP321_REG_ADDR(0x00000184) | ||
99 | #define IOP321_ATUISR (volatile u32 *)IOP321_REG_ADDR(0x00000188) | ||
100 | #define IOP321_ATUIMR (volatile u32 *)IOP321_REG_ADDR(0x0000018C) | ||
101 | #define IOP321_IABAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000190) | ||
102 | #define IOP321_IAUBAR3 (volatile u32 *)IOP321_REG_ADDR(0x00000194) | ||
103 | #define IOP321_IALR3 (volatile u32 *)IOP321_REG_ADDR(0x00000198) | ||
104 | #define IOP321_IATVR3 (volatile u32 *)IOP321_REG_ADDR(0x0000019C) | ||
105 | /* Reserved 0x000001A0 through 0x000001A3*/ | ||
106 | #define IOP321_OCCAR (volatile u32 *)IOP321_REG_ADDR(0x000001A4) | ||
107 | /* Reserved 0x000001A8 through 0x000001AB*/ | ||
108 | #define IOP321_OCCDR (volatile u32 *)IOP321_REG_ADDR(0x000001AC) | ||
109 | /* Reserved 0x000001B0 through 0x000001BB*/ | ||
110 | #define IOP321_PDSCR (volatile u32 *)IOP321_REG_ADDR(0x000001BC) | ||
111 | #define IOP321_PMCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001C0) | ||
112 | #define IOP321_PMNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001C1) | ||
113 | #define IOP321_APMCR (volatile u16 *)IOP321_REG_ADDR(0x000001C2) | ||
114 | #define IOP321_APMCSR (volatile u16 *)IOP321_REG_ADDR(0x000001C4) | ||
115 | /* Reserved 0x000001C6 through 0x000001DF */ | ||
116 | #define IOP321_PCIXCAPID (volatile u8 *)IOP321_REG_ADDR(0x000001E0) | ||
117 | #define IOP321_PCIXNEXT (volatile u8 *)IOP321_REG_ADDR(0x000001E1) | ||
118 | #define IOP321_PCIXCMD (volatile u16 *)IOP321_REG_ADDR(0x000001E2) | ||
119 | #define IOP321_PCIXSR (volatile u32 *)IOP321_REG_ADDR(0x000001E4) | ||
120 | #define IOP321_PCIIRSR (volatile u32 *)IOP321_REG_ADDR(0x000001EC) | ||
121 | 37 | ||
122 | /* Messaging Unit 0x00000300 through 0x000003FF */ | 38 | /* Messaging Unit 0x00000300 through 0x000003FF */ |
123 | 39 | ||
@@ -317,6 +233,8 @@ | |||
317 | 233 | ||
318 | /* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ | 234 | /* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */ |
319 | 235 | ||
236 | #include <asm/hardware/iop3xx.h> | ||
237 | |||
320 | 238 | ||
321 | #ifndef __ASSEMBLY__ | 239 | #ifndef __ASSEMBLY__ |
322 | extern void iop321_init_irq(void); | 240 | extern void iop321_init_irq(void); |
diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h index b4073f15b405..4c64d9e7229b 100644 --- a/include/asm-arm/arch-iop32x/memory.h +++ b/include/asm-arm/arch-iop32x/memory.h | |||
@@ -20,8 +20,8 @@ | |||
20 | * to an address that the kernel can use. | 20 | * to an address that the kernel can use. |
21 | */ | 21 | */ |
22 | 22 | ||
23 | #define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0)) | 23 | #define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) |
24 | #define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2))) | 24 | #define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) |
25 | 25 | ||
26 | 26 | ||
27 | #endif | 27 | #endif |
diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h index d4c8d691e1b0..1ac207a0d52e 100644 --- a/include/asm-arm/arch-iop32x/system.h +++ b/include/asm-arm/arch-iop32x/system.h | |||
@@ -16,7 +16,7 @@ static inline void arch_idle(void) | |||
16 | 16 | ||
17 | static inline void arch_reset(char mode) | 17 | static inline void arch_reset(char mode) |
18 | { | 18 | { |
19 | *IOP321_PCSR = 0x30; | 19 | *IOP3XX_PCSR = 0x30; |
20 | 20 | ||
21 | if ( 1 && mode == 's') { | 21 | if ( 1 && mode == 's') { |
22 | /* Jump into ROM at address 0 */ | 22 | /* Jump into ROM at address 0 */ |
diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h index 4a457084c5c6..5e3cb32af020 100644 --- a/include/asm-arm/arch-iop33x/hardware.h +++ b/include/asm-arm/arch-iop33x/hardware.h | |||
@@ -19,27 +19,11 @@ | |||
19 | */ | 19 | */ |
20 | 20 | ||
21 | #define pcibios_assign_all_busses() 1 | 21 | #define pcibios_assign_all_busses() 1 |
22 | #define PCIBIOS_MIN_IO 0x00000000 | ||
23 | #define PCIBIOS_MIN_MEM 0x00000000 | ||
22 | 24 | ||
23 | 25 | ||
24 | /* | 26 | /* |
25 | * The min PCI I/O and MEM space are dependent on what specific | ||
26 | * chipset/platform we are running on, so instead of hardcoding with | ||
27 | * #ifdefs, we just fill these in the platform level PCI init code. | ||
28 | */ | ||
29 | #ifndef __ASSEMBLY__ | ||
30 | extern unsigned long iop3xx_pcibios_min_io; | ||
31 | extern unsigned long iop3xx_pcibios_min_mem; | ||
32 | |||
33 | extern unsigned int processor_id; | ||
34 | #endif | ||
35 | |||
36 | /* | ||
37 | * We just set these to zero since they are really bogus anyways | ||
38 | */ | ||
39 | #define PCIBIOS_MIN_IO (iop3xx_pcibios_min_io) | ||
40 | #define PCIBIOS_MIN_MEM (iop3xx_pcibios_min_mem) | ||
41 | |||
42 | /* | ||
43 | * Generic chipset bits | 27 | * Generic chipset bits |
44 | * | 28 | * |
45 | */ | 29 | */ |
diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h index a7f47122c5e1..e85e1a2e1a86 100644 --- a/include/asm-arm/arch-iop33x/iop331.h +++ b/include/asm-arm/arch-iop33x/iop331.h | |||
@@ -24,27 +24,6 @@ | |||
24 | #endif | 24 | #endif |
25 | 25 | ||
26 | /* | 26 | /* |
27 | * IOP331 I/O and Mem space regions for PCI autoconfiguration | ||
28 | */ | ||
29 | #define IOP331_PCI_IO_WINDOW_SIZE 0x00010000 | ||
30 | #define IOP331_PCI_LOWER_IO_PA 0x90000000 | ||
31 | #define IOP331_PCI_LOWER_IO_VA 0xfe000000 | ||
32 | #define IOP331_PCI_LOWER_IO_BA (*IOP331_OIOWTVR) | ||
33 | #define IOP331_PCI_UPPER_IO_PA (IOP331_PCI_LOWER_IO_PA + IOP331_PCI_IO_WINDOW_SIZE - 1) | ||
34 | #define IOP331_PCI_UPPER_IO_VA (IOP331_PCI_LOWER_IO_VA + IOP331_PCI_IO_WINDOW_SIZE - 1) | ||
35 | #define IOP331_PCI_UPPER_IO_BA (IOP331_PCI_LOWER_IO_BA + IOP331_PCI_IO_WINDOW_SIZE - 1) | ||
36 | #define IOP331_PCI_IO_OFFSET (IOP331_PCI_LOWER_IO_VA - IOP331_PCI_LOWER_IO_BA) | ||
37 | |||
38 | /* this can be 128M if OMWTVR1 is set */ | ||
39 | #define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ | ||
40 | /* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */ | ||
41 | #define IOP331_PCI_LOWER_MEM_PA 0x80000000 | ||
42 | #define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0) | ||
43 | #define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1) | ||
44 | #define IOP331_PCI_UPPER_MEM_BA (IOP331_PCI_LOWER_MEM_BA + IOP331_PCI_MEM_WINDOW_SIZE - 1) | ||
45 | #define IOP331_PCI_MEM_OFFSET (IOP331_PCI_LOWER_MEM_PA - IOP331_PCI_LOWER_MEM_BA) | ||
46 | |||
47 | /* | ||
48 | * IOP331 chipset registers | 27 | * IOP331 chipset registers |
49 | */ | 28 | */ |
50 | #define IOP331_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ | 29 | #define IOP331_VIRT_MEM_BASE 0xfeffe000 /* chip virtual mem address*/ |
@@ -54,79 +33,6 @@ | |||
54 | /* Reserved 0x00000000 through 0x000000FF */ | 33 | /* Reserved 0x00000000 through 0x000000FF */ |
55 | 34 | ||
56 | /* Address Translation Unit 0x00000100 through 0x000001FF */ | 35 | /* Address Translation Unit 0x00000100 through 0x000001FF */ |
57 | #define IOP331_ATUVID (volatile u16 *)IOP331_REG_ADDR(0x00000100) | ||
58 | #define IOP331_ATUDID (volatile u16 *)IOP331_REG_ADDR(0x00000102) | ||
59 | #define IOP331_ATUCMD (volatile u16 *)IOP331_REG_ADDR(0x00000104) | ||
60 | #define IOP331_ATUSR (volatile u16 *)IOP331_REG_ADDR(0x00000106) | ||
61 | #define IOP331_ATURID (volatile u8 *)IOP331_REG_ADDR(0x00000108) | ||
62 | #define IOP331_ATUCCR (volatile u32 *)IOP331_REG_ADDR(0x00000109) | ||
63 | #define IOP331_ATUCLSR (volatile u8 *)IOP331_REG_ADDR(0x0000010C) | ||
64 | #define IOP331_ATULT (volatile u8 *)IOP331_REG_ADDR(0x0000010D) | ||
65 | #define IOP331_ATUHTR (volatile u8 *)IOP331_REG_ADDR(0x0000010E) | ||
66 | #define IOP331_ATUBIST (volatile u8 *)IOP331_REG_ADDR(0x0000010F) | ||
67 | #define IOP331_IABAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000110) | ||
68 | #define IOP331_IAUBAR0 (volatile u32 *)IOP331_REG_ADDR(0x00000114) | ||
69 | #define IOP331_IABAR1 (volatile u32 *)IOP331_REG_ADDR(0x00000118) | ||
70 | #define IOP331_IAUBAR1 (volatile u32 *)IOP331_REG_ADDR(0x0000011C) | ||
71 | #define IOP331_IABAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000120) | ||
72 | #define IOP331_IAUBAR2 (volatile u32 *)IOP331_REG_ADDR(0x00000124) | ||
73 | #define IOP331_ASVIR (volatile u16 *)IOP331_REG_ADDR(0x0000012C) | ||
74 | #define IOP331_ASIR (volatile u16 *)IOP331_REG_ADDR(0x0000012E) | ||
75 | #define IOP331_ERBAR (volatile u32 *)IOP331_REG_ADDR(0x00000130) | ||
76 | #define IOP331_ATU_CAPPTR (volatile u32 *)IOP331_REG_ADDR(0x00000134) | ||
77 | /* Reserved 0x00000138 through 0x0000013B */ | ||
78 | #define IOP331_ATUILR (volatile u8 *)IOP331_REG_ADDR(0x0000013C) | ||
79 | #define IOP331_ATUIPR (volatile u8 *)IOP331_REG_ADDR(0x0000013D) | ||
80 | #define IOP331_ATUMGNT (volatile u8 *)IOP331_REG_ADDR(0x0000013E) | ||
81 | #define IOP331_ATUMLAT (volatile u8 *)IOP331_REG_ADDR(0x0000013F) | ||
82 | #define IOP331_IALR0 (volatile u32 *)IOP331_REG_ADDR(0x00000140) | ||
83 | #define IOP331_IATVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000144) | ||
84 | #define IOP331_ERLR (volatile u32 *)IOP331_REG_ADDR(0x00000148) | ||
85 | #define IOP331_ERTVR (volatile u32 *)IOP331_REG_ADDR(0x0000014C) | ||
86 | #define IOP331_IALR1 (volatile u32 *)IOP331_REG_ADDR(0x00000150) | ||
87 | #define IOP331_IALR2 (volatile u32 *)IOP331_REG_ADDR(0x00000154) | ||
88 | #define IOP331_IATVR2 (volatile u32 *)IOP331_REG_ADDR(0x00000158) | ||
89 | #define IOP331_OIOWTVR (volatile u32 *)IOP331_REG_ADDR(0x0000015C) | ||
90 | #define IOP331_OMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000160) | ||
91 | #define IOP331_OUMWTVR0 (volatile u32 *)IOP331_REG_ADDR(0x00000164) | ||
92 | #define IOP331_OMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x00000168) | ||
93 | #define IOP331_OUMWTVR1 (volatile u32 *)IOP331_REG_ADDR(0x0000016C) | ||
94 | /* Reserved 0x00000170 through 0x00000177*/ | ||
95 | #define IOP331_OUDWTVR (volatile u32 *)IOP331_REG_ADDR(0x00000178) | ||
96 | /* Reserved 0x0000017C through 0x0000017F*/ | ||
97 | #define IOP331_ATUCR (volatile u32 *)IOP331_REG_ADDR(0x00000180) | ||
98 | #define IOP331_PCSR (volatile u32 *)IOP331_REG_ADDR(0x00000184) | ||
99 | #define IOP331_ATUISR (volatile u32 *)IOP331_REG_ADDR(0x00000188) | ||
100 | #define IOP331_ATUIMR (volatile u32 *)IOP331_REG_ADDR(0x0000018C) | ||
101 | #define IOP331_IABAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000190) | ||
102 | #define IOP331_IAUBAR3 (volatile u32 *)IOP331_REG_ADDR(0x00000194) | ||
103 | #define IOP331_IALR3 (volatile u32 *)IOP331_REG_ADDR(0x00000198) | ||
104 | #define IOP331_IATVR3 (volatile u32 *)IOP331_REG_ADDR(0x0000019C) | ||
105 | /* Reserved 0x000001A0 through 0x000001A3*/ | ||
106 | #define IOP331_OCCAR (volatile u32 *)IOP331_REG_ADDR(0x000001A4) | ||
107 | /* Reserved 0x000001A8 through 0x000001AB*/ | ||
108 | #define IOP331_OCCDR (volatile u32 *)IOP331_REG_ADDR(0x000001AC) | ||
109 | /* Reserved 0x000001B0 through 0x000001BB*/ | ||
110 | #define IOP331_VPDCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001B8) | ||
111 | #define IOP331_VPDNXTP (volatile u8 *)IOP331_REG_ADDR(0x000001B9) | ||
112 | #define IOP331_VPDAR (volatile u16 *)IOP331_REG_ADDR(0x000001BA) | ||
113 | #define IOP331_VPDDR (volatile u32 *)IOP331_REG_ADDR(0x000001BC) | ||
114 | #define IOP331_PMCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001C0) | ||
115 | #define IOP331_PMNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001C1) | ||
116 | #define IOP331_APMCR (volatile u16 *)IOP331_REG_ADDR(0x000001C2) | ||
117 | #define IOP331_APMCSR (volatile u16 *)IOP331_REG_ADDR(0x000001C4) | ||
118 | /* Reserved 0x000001C6 through 0x000001CF */ | ||
119 | #define IOP331_MSICAPID (volatile u8 *)IOP331_REG_ADDR(0x000001D0) | ||
120 | #define IOP331_MSINXTP (volatile u8 *)IOP331_REG_ADDR(0x000001D1) | ||
121 | #define IOP331_MSIMCR (volatile u16 *)IOP331_REG_ADDR(0x000001D2) | ||
122 | #define IOP331_MSIMAR (volatile u32 *)IOP331_REG_ADDR(0x000001D4) | ||
123 | #define IOP331_MSIMUAR (volatile u32 *)IOP331_REG_ADDR(0x000001D8) | ||
124 | #define IOP331_MSIMDR (volatile u32 *)IOP331_REG_ADDR(0x000001DC) | ||
125 | #define IOP331_PCIXCAPID (volatile u8 *)IOP331_REG_ADDR(0x000001E0) | ||
126 | #define IOP331_PCIXNEXT (volatile u8 *)IOP331_REG_ADDR(0x000001E1) | ||
127 | #define IOP331_PCIXCMD (volatile u16 *)IOP331_REG_ADDR(0x000001E2) | ||
128 | #define IOP331_PCIXSR (volatile u32 *)IOP331_REG_ADDR(0x000001E4) | ||
129 | #define IOP331_PCIIRSR (volatile u32 *)IOP331_REG_ADDR(0x000001EC) | ||
130 | 36 | ||
131 | /* Messaging Unit 0x00000300 through 0x000003FF */ | 37 | /* Messaging Unit 0x00000300 through 0x000003FF */ |
132 | 38 | ||
@@ -332,6 +238,8 @@ | |||
332 | 238 | ||
333 | /* Reserved 0x0000178c through 0x000019ff */ | 239 | /* Reserved 0x0000178c through 0x000019ff */ |
334 | 240 | ||
241 | #include <asm/hardware/iop3xx.h> | ||
242 | |||
335 | 243 | ||
336 | #ifndef __ASSEMBLY__ | 244 | #ifndef __ASSEMBLY__ |
337 | extern void iop331_init_irq(void); | 245 | extern void iop331_init_irq(void); |
diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h index 5e47164934ce..de208d2cca4e 100644 --- a/include/asm-arm/arch-iop33x/memory.h +++ b/include/asm-arm/arch-iop33x/memory.h | |||
@@ -19,8 +19,8 @@ | |||
19 | * bus_to_virt: Used to convert an address for DMA operations | 19 | * bus_to_virt: Used to convert an address for DMA operations |
20 | * to an address that the kernel can use. | 20 | * to an address that the kernel can use. |
21 | */ | 21 | */ |
22 | #define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0)) | 22 | #define __virt_to_bus(x) (((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0)) |
23 | #define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2))) | 23 | #define __bus_to_virt(x) (__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2))) |
24 | 24 | ||
25 | 25 | ||
26 | #endif | 26 | #endif |
diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h index 43cc787ea629..8270ad9f86c8 100644 --- a/include/asm-arm/arch-iop33x/system.h +++ b/include/asm-arm/arch-iop33x/system.h | |||
@@ -16,7 +16,7 @@ static inline void arch_idle(void) | |||
16 | 16 | ||
17 | static inline void arch_reset(char mode) | 17 | static inline void arch_reset(char mode) |
18 | { | 18 | { |
19 | *IOP331_PCSR = 0x30; | 19 | *IOP3XX_PCSR = 0x30; |
20 | 20 | ||
21 | if ( 1 && mode == 's') { | 21 | if ( 1 && mode == 's') { |
22 | /* Jump into ROM at address 0 */ | 22 | /* Jump into ROM at address 0 */ |
diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index cb41defad4a1..24621c49a0c7 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h | |||
@@ -56,14 +56,6 @@ extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); | |||
56 | extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); | 56 | extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); |
57 | extern void iop3xx_pci_preinit(void); | 57 | extern void iop3xx_pci_preinit(void); |
58 | 58 | ||
59 | extern int iop321_setup(int nr, struct pci_sys_data *); | ||
60 | extern struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *); | ||
61 | extern void iop321_init(void); | ||
62 | |||
63 | extern int iop331_setup(int nr, struct pci_sys_data *); | ||
64 | extern struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *); | ||
65 | extern void iop331_init(void); | ||
66 | |||
67 | extern int dc21285_setup(int nr, struct pci_sys_data *); | 59 | extern int dc21285_setup(int nr, struct pci_sys_data *); |
68 | extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); | 60 | extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); |
69 | extern void dc21285_preinit(void); | 61 | extern void dc21285_preinit(void); |